From bd9e6617827818fd043452c08c606f07b78014a0 Mon Sep 17 00:00:00 2001 From: toma Date: Wed, 25 Nov 2009 17:56:58 +0000 Subject: Copy the KDE 3.5 branch to branches/trinity for new KDE 3.5 features. BUG:215923 git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdesdk@1054174 283d02a7-25f6-0310-bc7c-ecb5cbfe19da --- scripts/kde-build | 898 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 898 insertions(+) create mode 100755 scripts/kde-build (limited to 'scripts/kde-build') diff --git a/scripts/kde-build b/scripts/kde-build new file mode 100755 index 00000000..5c9a111d --- /dev/null +++ b/scripts/kde-build @@ -0,0 +1,898 @@ +#! /usr/bin/env bash +################################################################################ +# Updates and recompiles a local KDE tree from SVN # +# (c) 2000, 2001, 2002, 2003 by Frerich Raabe # +# (c) 2002, 2003 by Stephan Kulow # +################################################################################ +# Do not edit this file, change kde-buildrc instead! # +################################################################################ + +# These strings are defined as variables to make the output look more +# consistent. +# +str_okay="done!" +str_error="failed!" + +# The variables whose name is prefixed with ERR_ hold the error codes which +# are returned by the script and depend on the reason for aborting the +# execution. +# +# No error has been noticed, everything seems to be fine. +# +err_no_error="0" + +# Could not change into a directory of a module - wrong owner/access +# settings? +# +err_change_into_mod_dir="1" + +# Could not find the file 'Makefile.in' for a module, mostly happens if +# 'make -f Makefile.cvs' hasn't been executed for a module. +# +err_no_makefile_in="2" + +# The 'configure' command failed for a module because the system doesn't +# support certain features - I hope you activated logfile generation... ;) +# +err_configure_fail="3" + +# The compilation of a module failed - if the module is defined in +# $critical_modules (see below) the execution is aborted, otherwise the script +# will continue with the next module. +# +err_compile_fail="4" + +# The installation of a module failed - this mostly happens if there's not +# enough free disk space on the partition which $KDEDIRS is mounted to. +# +err_install_fail="5" + +# The $KDESRCDIR variable wasn't set or contains a non-existant directory. +# +err_inv_kdesrcdir="6" + +# The $QTDIR variable wasn't set, points to a non-existant directory or +# doesn't contain a bin/, lib/, or include/ subdirectory. +# +err_inv_qtdir="7" + +# .... + +# The configuration file couldn't be found. +# +err_no_config="11" + +# You can't mix CVS_CLEAN and INCREMENTAL_BUILD +# +err_cvsclean_incremental="12" + +# You can't mix BUILD_CLEAN and INCREMENTAL_BUILD +# +err_buildclean_incremental="13" + +# Certain modules depend on others - those "base" modules which are required +# by others to compile and/or run should be listed here to ensure that the +# script is aborted in case on of these modules doesn't build. +# These modules needs to be build and installed in this specific order! +# +critical_modules="arts kdelibs kdebase" + +# Internal variable, do not change. +# +dateformat="`date +%Y%m%d`" + +# Private variables fro controlling kppp +# +we_started_kppp="FALSE" + +# Connects to the internet using kppp if desired +# +kppp_connect() +{ +if [ "$USE_KPPP" = "TRUE" ]; then + kppp_process=`dcopfind -a kppp-*` + if [ "$kppp_process" = "" ]; then + #kppp not running + kppp > /dev/null 2>&1 & + sleep $KPPP_LOAD_TIME + `dcop $(dcopfind -a kppp-*) KpppIface beginConnect` + #wait for a while + sleep $KPPP_CONNECT_TIME + kppp_connected=`dcop $(dcopfind -a kppp-*) KpppIface isConnected` + if [ "$kppp_connected" = "true" ]; then + we_started_kppp="TRUE" + echo Connected OK + else + echo Could not connect, maybe you need to increase KPPP_CONNECT_TIME + fi + + else + kppp_connected=`dcop $(dcopfind -a kppp-*) KpppIface isConnected` + if [ "$kppp_connected" = "false" ]; then + #Start a connection + `dcop $(dcopfind -a kppp-*) KpppIface beginConnect` + #wait for a while + sleep $KPPP_CONNECT_TIME + kppp_connected=`dcop $(dcopfind -a kppp-*) KpppIface isConnected` + if [ "$kppp_connected" = "true" ]; then + we_started_kppp="TRUE" + echo Connected OK + else + echo Could not connect, maybe you need to increase KPPP_CONNECT_TIME + fi + else + echo Kppp is already connected to the internet + fi + fi +fi +} + +# Disconnects from the internet using kppp if desired +# +kppp_disconnect() +{ +if [ "$USE_KPPP" = "TRUE" ]; then + if [ $(dcopfind -a kppp-*) = "" ]; then + #kppp not running + echo Kppp was not running so cannot be disconnected + else + if [ "$we_started_kppp" = "TRUE" ]; then + echo Disconnecting kppp + `dcop $(dcopfind -a kppp-*) KpppIface disconnect` + else + echo We didnt connect using kppp so we wont disconnect + fi + fi +fi +} + +# This method gives some kind of status message in the title bar of Konsole, +# xterm, etc.. Thanks have to go to Malte Starostik +# for the code :-) +set_title() { + which printf > /dev/null 2>&1 || return + if ([ "$TERM" = "xterm" ] || [ "$TERM" = "xterm-color" ] || [ "$TERM" = "screen" ]) && tty -s; then + printf "\033]0;$1\007" + fi +} + +# moves a log file to be named $1, so one can see on first glance +move_logfile() { + rename_logfile=`echo $logfile | sed -e "s,-build-,-$1-,"` + mv "$logfile" "$rename_logfile" + logfile=$rename_logfile +} + +# Executes the given command, logging the output to $logfile if requested. +# +log_cmd() { + if [ -n "$logfile" ]; then + eval "$1 >> $logfile 2>&1" + else + eval "$1" + fi + return $? +} + +module_variable() { + eval "$1=\$BASE_$1" + varname="$1_"`echo $module|tr a-z A-Z|tr - _|sed "s/\(.*\)-[0-9]*/\1/g"`; # e.g. $1_ARTS etc. + varvalue=`eval echo '$'$varname` + if [ -n "$varvalue" ]; then + eval "$1=\"$varvalue\"" + fi +} + +# Inserts a "-> blah <---" style separator into $logfile, and starts a timer +log_section() { + [ -z "$logfile" ] && return 0 + len=`echo $1 | wc -m | sed -e "s,^ *,,"` + echo "------------------------------------------------------------------------" \ + | sed -e "s,^,-> $1 <," -e "s,.\{$len\}$,," >> $logfile 2>&1 + starttime=`date +%s` +} + +# Computes the time elapsed since the last log_section call, +# inserts a "----" separator, and the time needed, into $logfile +log_endsection() { + [ -z "$logfile" ] && return 0 + compute_time + echo "----------------------------------------------------------------------------" >> $logfile 2>&1 + printf "%s for module %s done. Time needed: %02d:%02d:%02d\n" "$1" $module $hours $minutes $seconds >> $logfile 2>&1 + echo "" >> $logfile 2>&1 +} + +# This function computes the time which was needed for a certain task, using +# expr (instead of shell-specific features) for portability. +# +compute_time() { + duration=`expr \`date +%s\` - $starttime` + hours=`expr $duration / 3600` + minutes=`expr $duration % 3600 / 60` + seconds=`expr $duration % 60` +} + +prepare_update() { + # This checks whether the user wants a certain branch and generates the + # command line. + # + cmd_update="svn" + if test -d $KDESRCDIR/$module; then + test -z "$SUBDIR" && { cmd_update="$cmd_update update" ; return; } + cmd_update="$cmd_update switch -r HEAD" + else + cmd_update="$cmd_update co" + fi + if [ -z "$ACCOUNT" ]; then + cmd_update="$cmd_update $ANONSVNROOT$SUBDIR" + else + cmd_update="$cmd_update" + if [ "$SSHACCOUNT" = "yes" ]; then + cmd_update="$cmd_update svn+ssh://$ACCOUNT@svn.kde.org/home/kde$SUBDIR" + else + cmd_update="$cmd_update https://$ACCOUNT@svn.kde.org/home/kde$SUBDIR" + fi + fi + if [ -n "$CHECKOUT_PARTIAL" -a "$1" = "toponly" ]; then # TODO + cmd_update="$cmd_update -N" + fi + if test ! -d $KDESRCDIR/$module; then + cmd_update="$cmd_update $module" + fi +} + +# This function installs a compiled CVS module. +# +install_module() { + echo -n " Installing..." + set_title "Installing module $module..." + log_section "Installation" + + if log_cmd "$cmd_make_install"; then + log_endsection "Installation" + if [ -n "$KDELOGDIR" ]; then + echo "Build of module $module successfully finished at `date +%c`" >> $logfile + [ -n "$cmd_compress" ] && eval "$cmd_compress $logfile" + fi + echo "$str_okay" + echo "Module $module successfully installed in $KDEDIRS!" + move_logfile "finished" + else + echo "$str_error" + move_logfile "failed" + [ -n "$cmd_compress" ] && eval "$cmd_compress $logfile" + [ $critical -eq 0 ] || exit $err_compile_fail + fi +} + +make_makefile_cvs() { + cmd_make_makefile_cvs="$MAKE -f Makefile.cvs" + if [ "$NICECOMPILE" = yes ]; then + cmd_make_makefile_cvs="nice $cmd_make_makefile_cvs" + fi + unset UNSERMAKE || true + if [ -n "$USE_UNSERMAKE" ] && \ + !(echo $NO_UNSERMAKE_MODULES | grep $module > /dev/null 2>&1); then + export UNSERMAKE=$USE_UNSERMAKE + fi + + if [ "$INCREMENTAL_BUILD" = "yes" -a -e "Makefile.in" ]; then + cmd_make_makefile_cvs="echo Warning: no Makefile.cvs for module $module - as requested" + fi + + if log_cmd "$cmd_make_makefile_cvs"; then + echo "$str_okay" + else + echo "$str_error" + fi +} + +# Disable zsh feature +CDPATH= + +# Get current configuration, bail out if it couldn't be found. +# Search order is $PWD:$HOME:`dirname $0` +# The name in $HOME is .kde-buildrc (note the leading '.') +if [ -e "$PWD/kde-buildrc" ]; then + rc_file="$PWD/kde-buildrc" +else + if [ -e "$HOME/.kde-buildrc" ]; then + rc_file="$HOME/.kde-buildrc" + else + if [ -e "`dirname $0`/kde-buildrc" ]; then + rc_file="`dirname $0`/kde-buildrc" + else + echo "ERROR: Cannot locate configuration file kde-buildrc!"; exit $err_no_config + fi + fi +fi + +INCREMENTAL_BUILD="no" + +. $rc_file + +if [ "${INCREMENTAL_BUILD}" = "yes" -a "${CVS_CLEAN}" = "yes" ]; then + echo "ERROR: Cannot use CVS_CLEAN=\"yes\" and INCREMENTAL_BUILD=\"yes\" together!"; exit $err_cvsclean_incremental +fi + +if [ "${INCREMENTAL_BUILD}" = "yes" -a "${BUILD_CLEAN}" = "yes" ]; then + echo "ERROR: Cannot use BUILD_CLEAN=\"yes\" and INCREMENTAL_BUILD=\"yes\" together!"; exit $err_buildclean_incremental +fi + +domakecvs=1 +dosvnupdate=1 +dousage=0 +specifiedModules="" + +# Parse args +# +while [ $# != 0 ] +do + arg=$1 + case "$arg" in + --help) + dousage=1 + break ;; + --version) + # Show version + echo "$0 version 0.8.15" + exit $err_no_error ;; + --no-update) + dosvnupdate=0 ;; + --no-check) + domakecvs=0 ;; + --incremental) + INCREMENTAL_BUILD="yes" + ;; + --full) + INCREMENTAL_BUILD="no" + ;; + -*) + echo "Unhandled option $arg" + dousage=1 + break ;; + *) + specifiedModules="$specifiedModules $arg" ;; + esac + shift +done + +# Show help info +if [ "$dousage" -eq 1 ]; then + echo "usage: $0 [--options] [modules]" + echo "--no-update Do not update from SVN." + echo "--no-check Do not re-run Makefile.cvs." + echo "--incremental Start make right after update - risky. This also" + echo " disables the BUILD_CLEAN and CVS_CLEAN options." + echo "--full Do full setup even when INCREMENTAL_BUILD is set." + echo "--help Show this message." + exit $err_no_error +fi + +# Expand ~ +QTDIR=`echo "$QTDIR" | sed -e "s,^\~/,$HOME/,"` +KDESRCDIR=`echo "$KDESRCDIR" | sed -e "s,^\~/,$HOME/,"` +KDEBUILDDIR=`echo "$KDEBUILDDIR" |sed -e "s,^\~/,$HOME/,"` +KDEDIRS=`echo "$KDEDIRS" |sed -e "s,^\~/,$HOME/,"` +KDELOGDIR=`echo "$KDELOGDIR" |sed -e "s,^\~/,$HOME/,"` + +# Make sure some paths are according to the rc file. Note that there are AFAIK +# UNIX flavors which don't support LD_LIBRARY_PATH +PATH=$QTDIR/bin:$KDEDIRS/bin:$PATH +MANPATH=$QTDIR/doc/man:$MANPATH +LD_LIBRARY_PATH=$KDEDIRS/lib:$QTDIR/lib:$LD_LIBRARY_PATH + +if [ -n "$USE_UNSERMAKE" ]; then + if [ -n "$MAKE" ]; then + echo "overwriting MAKE=$USE_UNSERMAKE" + fi + MAKE=$USE_UNSERMAKE + UNSERMAKE_PATH=`dirname $USE_UNSERMAKE` + PATH=$UNSERMAKE_PATH:$PATH +fi + +if [ -z "$MAKE" ]; then + MAKE=make +fi + +if [ -n "$specifiedModules" ]; then + # In case someone with a kdebase dir in $PWD does autocompletion.. + modules=$( echo $specifiedModules | sed -e 's/\///g' ) +else + if [ "$ONLYLISTEDMODULES" = yes ]; then + if [ "$USEKDESUPPORT" = yes ]; then + modules="kdesupport $critical_modules $KDEMODULES" + else + modules="$critical_modules $KDEMODULES" + fi + else + modules="$critical_modules" + # This generates in 'modules' a list of the modules which shall be updated. + # + potential_modules=`find $KDESRCDIR -type d -mindepth 1 \ + -maxdepth 1 -follow | sed -e "s@.*/?*@@"` + for module in $potential_modules; do + if [ -d $KDESRCDIR/$module/CVS -a -w $KDESRCDIR/$module ] \ + && !(echo $EXCLUDE | grep -q $module) \ + && !(echo $modules | grep -q $module) ; then + modules="$modules $module" + fi + done + fi +fi + +# Various checks to ensure that the user didn't specify invalid data which +# would make our script break. +# +if [ -n "$KDELOGDIR" -a ! -d "$KDELOGDIR" ]; then + if ! mkdir -p "$KDELOGDIR" > /dev/null 2>&1; then + echo "WARNING: Could not create logfile-directory." + echo "WARNING: Logfile generation deactivated." + KDELOGDIR="" + fi +else + if [ -n "$KDELOGDIR" -a ! -w "$KDELOGDIR" ]; then + echo "WARNING: Could not obtain write access to specified logfile-directory." + echo "WARNING: Logfile generation deactivated." + KDELOGDIR="" + fi +fi + +if [ -n "$KDELOGDIR" ]; then + str_error="$str_error Check the logfile in $KDELOGDIR for further information." +fi + +if [ ! -d "$KDESRCDIR" ]; then + echo "ERROR: Invalid source directory specified!"; exit $err_inv_kdesrcdir +fi +if [ ! -d "$QTDIR" -o ! -d "$QTDIR/lib" -o ! -d "$QTDIR/bin" -o ! -d "$QTDIR/include" ]; then + echo "ERROR: Invalid Qt directory specified!"; exit $err_inv_qtdir +fi + +if [ "$COMPRESSLOGS" = yes ]; then + if which bzip2 > /dev/null 2>&1; then + cmd_compress="`which bzip2` -f " + else + if which gzip > /dev/null 2>&1; then + cmd_compress="`which gzip` -f " + else + echo "WARNING: Neither bzip2 nor gzip was found, disabling compression of logfiles." + cmd_compress="" + fi + fi +fi + +if which sudo > /dev/null 2>&1; then + cmd_sudo="sudo" +else + cmd_sudo="su -c" +fi + +# Clean the installation directory if selected. +# +if test "$INSTALLFROMSCRATCH" = yes && test -z "$specifiedModules" ; then + mkdir -p $KDEDIRS 2> /dev/null + if [ ! -w $KDEDIRS ]; then + echo "Enter the root password to clean the installation directory." + echo "WARNING: All files and directories in $KDEDIRS will be deleted!" + echo -n "Please enter root " + eval "$cmd_sudo rm -rf $KDEDIRS/*" + else + rm -rf $KDEDIRS/* + fi +fi + +# Optionally activate cheap tweaks. +# +if [ "$TWEAKCOMPILE" = yes ]; then + CFLAGS="-O0" + CXXFLAGS="-O0" + export CFLAGS CXXFLAGS +fi + +# Preprocess configuration keys, expand keywords (DISTCC) +# +if echo $MAKE_OPTS_COMPILE | grep DISTCC > /dev/null; then + if [ -n "$DISTCC_HOSTS" ]; then + hosts=0 + for host in $DISTCC_HOSTS; do + hosts=$((${hosts} + 1)) + done + hosts=$((${hosts} * 2)) + else + hosts=1 + fi + MAKE_OPTS_COMPILE=`echo $MAKE_OPTS_COMPILE | sed -e "s,DISTCC,$hosts,"` +fi + +if echo $MAKE_OPTS_COMPILE | grep TEAMBUILDER > /dev/null; then + if ! which tbcompiler > /dev/null 2>&1; then + echo "TEAMBUILDER is not in PATH and OPTS_COMPILE has TEAMBUILDER" + exit 1 + fi + hosts=`tbcompiler -joblimit` + if [ -z "$hosts" ]; then + hosts=1 + fi + MAKE_OPTS_COMPILE=`echo $MAKE_OPTS_COMPILE | sed -e "s,TEAMBUILDER,$hosts,"` +fi + +#Connect to the internet before we start enything +# +kppp_connect + +# Guess what? We'll finally start checking out the modules. :-) +# +# If we want to use unsermake, update that at the very beginning, so that +# all the modules make use of the most recent unsermake version. +# +if [ -n "$USE_UNSERMAKE" ] && [ "$dosvnupdate" -eq 1 ]; then + echo -n "Updating unsermake copy in $UNSERMAKE_PATH..." + cd "$UNSERMAKE_PATH" + svn up > /dev/null 2>&1 + echo $str_okay +fi + +BASE_CONFIGUREFLAGS="$CONFIGUREFLAGS" +BASE_SUBDIR=$SUBDIR +BASE_CHECKOUT_PARTIAL="$CHECKOUT_PARTIAL" + +for module in $modules; do + module_variable SUBDIR + SUBDIR=`echo $SUBDIR | sed -e "s,@MODULE@,$module,"` + module_variable CHECKOUT_PARTIAL + + if [ -n "$KDELOGDIR" ]; then + rm -f $KDELOGDIR/$module-build-* + rm -f $KDELOGDIR/$module-failed-* + rm -f $KDELOGDIR/$module-finished-* + logfile="$KDELOGDIR/$module-build-$dateformat.log" + echo "===============================================================================" > $logfile + echo "Build log of module $module, started on `date +%c`" >> $logfile + echo "===============================================================================" >> $logfile + echo "" >> $logfile + fi + + set_title "Updating module $module..." + if [ "$dosvnupdate" -eq 0 ]; then + echo -n "Checking module $module (no svn update)..." + cmd_update_raw="echo Warning: no svn update of module $module - as requested" + else + if [ -n "$BRANCH" ]; then + echo -n "Updating module $module ($BRANCH)..." + else + echo -n "Updating module $module ..." + fi + prepare_update + cmd_update_raw="$cmd_update" + fi + + log_section "Update $cmd_update" + + if [ "$dosvnupdate" -ne 0 -a -n "$CHECKOUT_PARTIAL" ]; then + cmd_update_raw="$cmd_update -l $module" + fi + + if test -d $KDESRCDIR/$module; then + cd $KDESRCDIR/$module + else + cd $KDESRCDIR + fi + + if ! log_cmd "$cmd_update_raw"; then + echo "$str_error" + continue + fi + + if [ "$dosvnupdate" -ne 0 -a -n "$CHECKOUT_PARTIAL" ]; then + prepare_update toponly + echo "defined subdirs!" + for part_dir in $CHECKOUT_PARTIAL; do + echo -n "Updating subdirectory $part_dir" + log_cmd "$cmd_update $module/$part_dir" + echo " $str_okay" + done + echo -n "Final touch..." + fi + + if [ "$CVS_CLEAN" = "yes" -a -e admin/Makefile.common -a "$INCREMENTAL_BUILD" != "yes" ]; then + cmd_make_cvs_clean="$MAKE -f admin/Makefile.common cvs-clean" + fi + + if ! log_cmd "$cmd_make_cvs_clean"; then + echo "$str_error" + continue + fi + + if [ ! -e Makefile.cvs ]; then + echo "$str_okay" + continue + fi + + if [ $domakecvs = 1 ] ; then + make_makefile_cvs + else + echo "$src_okay" + continue + fi + + log_endsection "Updating" +done + +# Now disconnect from the internet as we've finished updating +# +kppp_disconnect + +for module in $modules; do + module_variable CONFIGUREFLAGS + + # Nothing to do for kde-common + [ "$module" = "kde-common" ] && continue + logfile="$KDELOGDIR/$module-build-$dateformat.log" + + critical=0 + for m in $critical_modules; do if [ $m = $module ]; then critical=1; fi; done + + if ! cd $KDESRCDIR/$module; then + if [ $critical -eq 1 ]; then + echo "ERROR: Could not change into directory $KDESRCDIR/$module!" + exit $err_change_into_mod_dir + else + echo "WARNING: Could not change into directory $KDESRCDIR/$module." + echo "WARNING: Skipping module $module." + continue + fi + fi + + # Check whether 'make -f Makefile.cvs' has been called. + # + if [ ! -e "Makefile.in" ]; then + if [ $critical -eq 1 ]; then + echo "ERROR: Please execute '$MAKE -f Makefile.cvs' first for module $module!" + exit $err_no_makefile_in + else + echo "WARNING: '$MAKE -f Makefile.cvs' seems not to be executed for" + echo "WARNING: module $module, skipping compilation." + continue + fi + fi + + echo "Building module: $module" + + if [ -n "$KDEBUILDDIR" ]; then + + if [ "$BUILD_CLEAN" = "yes" -a "$INCREMENTAL_BUILD" != "yes" ]; then + if [ -d $KDEBUILDDIR/$module ]; then + echo -n " Removing build dir..." + set_title "Removing build dir for module $module..." + rm -rf $KDEBUILDDIR/$module + echo $str_okay + fi + fi + mkdir -p $KDEBUILDDIR/$module + cd $KDEBUILDDIR/$module + fi + + # Configure the module. + # + echo -n " Configuring..." + set_title "Configuring module $module..." + if [ -n "$KDEBUILDDIR" ]; then + cmd_configure="$KDESRCDIR/$module/configure $CONFIGUREFLAGS --with-qt-dir=$QTDIR" + else + cmd_configure="./configure $CONFIGUREFLAGS --with-qt-dir=$QTDIR" + fi + if echo $CONFIGUREFLAGS | grep -v -- "--prefix=" 2>/dev/null >/dev/null; then + cmd_configure="$cmd_configure --prefix=$KDEDIRS" + fi + [ "$NICECOMPILE" = yes ] && cmd_configure="nice $cmd_configure" + configure_skipped=0 + if [ "$INCREMENTAL_BUILD" = "yes" -a -e "Makefile" ]; then + cmd_configure_orig=$cmd_configure + cmd_configure="echo Warning: no configure for module $module - as requested" + configure_skipped=1 + fi + log_section "Configuration" + if [ -n "$KDELOGDIR" -a $configure_skipped -ne 1 ]; then + echo $cmd_configure >> $logfile + fi + + if ! log_cmd "$cmd_configure"; then + echo "$str_error" + move_logfile "failed" + [ -n "$cmd_compress" ] && eval "$cmd_compress $logfile" + [ $critical -eq 0 ] || exit $err_compile_fail + continue + fi + + log_endsection "Configuration" + if [ $configure_skipped -eq 1 ]; then + echo " skipped." + else + echo "$str_okay" + fi + + if [ $configure_skipped -eq 1 ]; then + echo -n " Updating Makefile..." + cmd_make_makefile="$MAKE $MAKE_OPTS Makefile" + [ "$NICECOMPILE" = yes ] && cmd_make_makefile="nice $cmd_make_makefile" + log_section "Updating Makefile" + if [ -n "$KDELOGDIR" ]; then + echo $cmd_make_makefile >> $logfile + fi + if ! log_cmd "$cmd_make_makefile"; then + echo -n " Falling back to normal Makefile.cvs ..." + worked=0 + + if [ -n "$KDEBUILDDIR" ]; then + cd $KDESRCDIR/$module # get back to the supermarket + fi + rm Makefile.in + make_makefile_cvs + if [ -n "$KDEBUILDDIR" ]; then + cd $KDEBUILDDIR/$module # got the sugar, honey? + fi + echo -n " Configuring..." + if log_cmd "$cmd_configure_orig"; then + if log_cmd "$cmd_make_makefile"; then + worked=1 + fi + fi + if [ $worked -ne 1 ]; then + echo "$str_error" + move_logfile "failed" + [ -n "$cmd_compress" ] && eval "$cmd_compress $logfile" + [ $critical -eq 0 ] || exit $err_compile_fail + continue + fi + fi + + log_endsection "Updating Makefile" + echo "$str_okay" + fi + + # Compile the module. + # + echo -n " Compiling..." + set_title "Compiling module $module..." + use_compile_target=no + [ -f $KDESRCDIR/$module/Makefile.am.in ] && [ -n "$MAKE_OPTS_COMPILE" ] && [ -n "$USE_UNSERMAKE" ] \ + && ! (echo $NO_UNSERMAKE_MODULES | grep $module > /dev/null 2>&1) \ + && use_compile_target=yes + if [ "$use_compile_target" = yes ]; then + cmd_make="$MAKE $MAKE_OPTS_COMPILE" + else + cmd_make="$MAKE $MAKE_OPTS" + fi + + [ $critical -eq 0 ] && cmd_make="$cmd_make -k" + [ "$NICECOMPILE" = yes ] && cmd_make="nice $cmd_make" + [ "$use_compile_target" = yes ] && cmd_make="$cmd_make compile" + + log_section "Compilation $cmd_make" + log_cmd "$cmd_make" + retval=$? + + if [ $retval -eq 0 ]; then + log_endsection "Compilation" + echo "$str_okay" + + # Link the module + if [ "$use_compile_target" = yes ]; then + echo -n " Linking..." + set_title "Linking module $module..." + cmd_make="$MAKE $MAKE_OPTS" + [ $critical -eq 0 ] && cmd_make="$cmd_make -k" + [ "$NICECOMPILE" = yes ] && cmd_make="nice $cmd_make" + + log_section "Linking $cmd_make" + log_cmd "$cmd_make" + retval=$? + if [ $retval -eq 0 ]; then + log_endsection "Linking" + echo "$str_okay" + fi + fi + fi + + if [ $retval -eq 0 ]; then + # Install the module. + # + cmd_make_install="$MAKE $MAKE_OPTS" + [ $critical -eq 0 ] && cmd_make_install="$cmd_make_install -k" + [ "$NICECOMPILE" = yes ] && cmd_make_install="nice $cmd_make_install" + cmd_make_install="$cmd_make_install install" + if [ ! -w $KDEDIRS ]; then + eval "$cmd_sudo \"$cmd_make_install\"" + else + install_module + fi + else + echo "$str_error" + # Attempt to display the actual error + grep -m1 -A2 ":[0-9]*: error:" $logfile + move_logfile "failed" + [ -n "$cmd_compress" ] && eval "$cmd_compress $logfile" + [ $critical -eq 0 ] || exit $err_compile_fail + fi +done + +set_title "KDE build finished." + +exit $err_no_error + +=head1 NAME + +kde-build - Updates and recompiles a tree of KDE modules + +=head1 SYNOPSIS + + kde-build + +=head1 DESCRIPTION + +kde-build has been designed to keep a local copy of several KDE +modules up to date and recompile them. Those modules have to be saved in a +common directory, e.g. something like + + ~/kde-src/ + | + +-> kdelibs/ + | + +-> kdebase/ + | + \-> kdenetwork/ + +In this case, the KDE source directory would be ~/kde-src/. The script will +take care of compiling them in the correct order, checks for dependencies +and resolves them as far as possible. + +Please note that, prior to first invocation of the script, the configuration +file 'F' has to be modified to reflect the local environment, +such as paths etc. + +=head1 RETURN VALUE + +The following error codes are returned by the script. + +0 - No error seems to have occured. + +1 - The script could not change into the directory of a module. + +2 - The script could not open the file 'Makefile.in' of a module. + +3 - The configuration of a module failed. + +4 - The compilation of a module failed. + +5 - The installation of a module failed. + +6 - An invalid source directory was specified. + +7 - An invalid Qt directory was specified. + +11 - The configuration file F couldn't be loaded. + +12 - Both CVS_CLEAN and INCREMENTAL_BUILD were set + +13 - Both BUILD_CLEAN and INCREMENTAL_BUILD were set + +=head1 EXAMPLES + + cd ~/scripts/; vi ./kde-buildrc; ./kde-build + +=head1 BUGS + +Probably. + +=head1 TODO + +Add a DIAGNOSIS section to this man page. + +=head1 AUTHOR + +Frerich Raabe + +=cut + +# vim:et:ts=2:sw=2 -- cgit v1.2.3