diff options
Diffstat (limited to 'tqtinterface/qt4/qmake/book/qmake-commandreference.leaf')
| -rw-r--r-- | tqtinterface/qt4/qmake/book/qmake-commandreference.leaf | 2156 |
1 files changed, 2156 insertions, 0 deletions
diff --git a/tqtinterface/qt4/qmake/book/qmake-commandreference.leaf b/tqtinterface/qt4/qmake/book/qmake-commandreference.leaf new file mode 100644 index 0000000..889d547 --- /dev/null +++ b/tqtinterface/qt4/qmake/book/qmake-commandreference.leaf @@ -0,0 +1,2156 @@ +\chapter qmake Command Reference + +\section1 qmake Command Reference + +\list +\i \link #About About This Reference \endlink +\i \link #Commands Command Line Options \endlink +\i \link #SystemVariables System Variables \endlink +\i \link #Functions Functions \endlink +\i \link #Properties Properties \endlink +\i \link #Environment Environment Variables and Configuration \endlink +\i \link #Extensions File Extensions \endlink +\i \link #Customizing Customizing Makefile Output \endlink +\endlist + + +\target About +\section1 About This Reference + +This reference is a detailed index of all command line options, +configurations and internal variables used by the cross-platform +makefile generation utility \e qmake. + +In addition to the variables and functions described in the following +sections, \e qmake project files may also include comments. +Comments begin with the '#' symbol and run to the end of the line. + +\target Commands +\section1 Command Line Options + +\section2 Syntax + +\code +qmake [options] files +\endcode + +\section2 Options + +The following options can be specified on the command line to \e qmake: + +\list +\i \c -o file \BR + \e qmake output will be directed to \e file. if this argument + is not specified, then \e qmake will try to guess a suitable name. If '-' is + specified, output is directed to stdout. +\i \c -unix \BR + \e qmake will run in unix mode. In this mode, Unix file + naming and path conventions will be used, additionally testing for unix + (as a scope) will succeed. This is the default mode on all Unices. +\i \c -macx \BR + \e qmake will run in Mac OS X mode. In this mode, Unix file + naming and path conventions will be used, additionally testing for macx + (as a scope) will succeed. This is the default mode on Mac OS X. +\i \c -win32 \BR + \e qmake will run in win32 mode. In this mode, Windows file naming and path + conventions will be used, additionally testing for win32 (as a scope) will succeed. + This is the default mode on Windows. +\i \c -d \BR + \e qmake will output (hopefully) useful debugging information. +\i \c -t tmpl \BR + \e qmake will override any set TEMPLATE variables with tmpl, but only + \e after the .pro file has been processed. +\i \c -tp prefix \BR + \e qmake will add the prefix to the TEMPLATE variable. +\i \c -help \BR + \e qmake will go over these features and give some useful help. +\endlist + +There are also warning options that can help to tqfind problems in your +project file: + +\list +\i \c -Wall \BR + With this \e qmake will turn on all known warnings. +\i \c -Wnone \BR + No warning information will be generated by \e qmake. +\i \c -Wparser \BR + \e qmake will only generate parser warnings, this will alert + you to common pitfalls, and potential problems in the parsing of your .pro + files. +\i \c -Wlogic \BR + Again \e qmake will warn of common pitfalls, and potential problems. This can + include (but not limited to) checking if a file is placed into a list of files + multiple times, if a file cannot be found, etc. +\endlist + +\e qmake supports two different modes of operation. The first mode, +which is the default is makefile generation. In this mode, \e qmake +will take a .pro file and turn it into a makefile. Creating makefiles +is covered by this reference guide, there is another mode which +generates .pro files. + +To toggle between these modes you must specify in the first argument +what mode you want to use. If no mode is specified, \e qmake will +assume you want makefile mode. The available modes are: + +\list +\i \c -makefile \BR + \e qmake output will be a makefile (\link #MakefileMode Makefile mode \endlink). +\i \c -project \BR + \e qmake output will be a project file (\link #ProjectfileMode Project file mode \endlink). +\endlist + +\target MakefileMode +\section3 Makefile Mode + +In Makefile mode \e qmake will generate a makefile. Additionally you may +supply the following arguments in this mode: + +\list +\i \c -after \BR + \e qmake will process assignments given on the commandline after + the specified files. +\i \c -nocache \BR + \e qmake will ignore the .qmake.cache file. +\i \c -nodepend \BR + \e qmake will not generate any dependency information. +\i \c -cache file \BR + \e qmake will use \e file as the cache file, ignoring any other .qmake.cache file found +\i \c -spec spec \BR + \e qmake will use \e spec as a path to platform-compiler information and QMAKESPEC will be ignored. +\endlist + +The \c files argument can be a list of one or more project files, separated +by spaces. You may also pass qmake assignments on the command line here and +they will be processed before all files specified, for example: + +qmake -makefile -unix -o Makefile "CONFIG+=test" test.pro + +If however you are certain you want your variables processed after the +the files specified, then you may pass the -after argument. When this +is specified all assignments on the commandline after the -after +option will be postponed until after the specified files are parsed. + +This will generate a Makefile, from test.pro with Unix pathnames. However +many of these arguments aren't necessary as they are the default. Therefore +the line can be simplified on Unix to: + +qmake "CONFIG+=test" test.pro + + +\target ProjectfileMode +\section3 Projectfile Mode + +In Projectfile mode \e qmake will generate a project file. Additionally, you may +supply the following arguments in this mode: + +\list +\i \c -r \BR + \e qmake will look through supplied directories recursively +\i \c -nopwd \BR + \e qmake will not look in your current working directory for + source code and only use the specified \c files +\endlist + +The \c files argument can be a list of files or directories. If a +directory is specified, then it will be included in the \link +#DEPENDPATH DEPENDPATH \endlink variable and relevant code from there +will be included in the generated project file, if a file is given it +will go into the correct variable depending on extension (i.e. .ui +files go into FORMS, .cpp files go into SOURCES, etc). Here too you +may pass assignments on the commandline, when doing so these +assignments will be placed last in the generated .pro file. + +\target SystemVariables +\section1 System Variables + +\list +\i \link #FrequentlyUsedSystemVariables Frequently Used System Variables \endlink +\i \link #RarelyUsedSystemVariables Rarely Used System Variables \endlink +\endlist + + +\target FrequentlyUsedSystemVariables +\section2 Frequently Used System Variables + +The following variables are recognized by \e qmake and are used +most frequently when creating project files. + + +\target CONFIG +\section3 CONFIG + + The \c CONFIG variable specifies project configuration and +compiler options. The values will be recognized internally by +\e qmake and have special meaning. They are as follows. + +These \c CONFIG values control compilation flags: + +\list +\i release - Compile with optimization enabled, ignored if + "debug" is specified +\i debug - Compile with debug options enabled +\i warn_on - The compiler should emit more warnings than normally, ignored if + "warn_off" is specified +\i warn_off - The compiler should only emit severe warnings. +\endlist + +These options define the application/library type: + +\list +\i qt - The target is a Qt application/library and requires the Qt header + files/library. The proper include and library paths for the Qt + library will automatically be added to the project. +\i opengl - The target requires the OpenGL (or Mesa) + headers/libraries. The proper include and library paths for + these libraries will automatically be added to the project. +\i thread - The target is a multi-threaded application or library. The + proper defines and compiler flags will automatically be added to + the project. +\i x11 - The target is a X11 application or library. The proper + include paths and libraries will automatically be added to the + project. +\i windows - The target is a Win32 window application (app only). The + proper include paths,compiler flags and libraries will + automatically be added to the project. +\i console - The target is a Win32 console application (app only). The + proper include paths, compiler flags and libraries will + automatically be added to the + project. +\i dll - The target is a shared object/DLL.The proper + include paths, compiler flags and libraries will automatically be + added to the project. +\i staticlib - The target is a static library (lib only). The proper + compiler flags will automatically be added to the project. +\i plugin - The target is a plugin (lib only). This enables dll as well. +\endlist + +These options are used to set the compiler flags: + +\list +\i exceptions - Exception support is enabled +\i rtti - RTTI support is enabled +\i stl - STL support is enabled +\endlist + +These options define specific things depending on the platform and/or template: + +\list +\i flat - When using the vcapp template this will put all the source files into the source group and + the header files into the header group regardless of what directory they reside in. Turning this + option off will group the files within the source/header group depending on the directory they + reside. This is turned on by default. +\endlist + +The \c CONFIG variable will also be checked when resolving +scopes. You may assign anything to this variable. + +For example: + +\code +CONFIG += qt console newstuff +... +newstuff { + SOURCES += new.cpp + HEADERS += new.h +} +\endcode + + +\target DEFINES +\section3 DEFINES + +\e qmake adds the values of this variable as compiler C +preprocessor macros (-D option). + +For example: + +\code +DEFINES += USE_MY_STUFF QT_DLL +\endcode + + +\target DEF_FILE +\section3 DEF_FILE + +\e {This is only used on Windows when using the 'app' template}. + +Specifies a .def file to be included in the project. + + +\target DESTDIR +\section3 DESTDIR + +Specifies where to put the \link #TARGET target \endlink file. + +For example: + +\code + DESTDIR = ../../lib +\endcode + +\target DLLDESTDIR +\section3 DLLDESTDIR + +Specifies where to copy the \link #TARGET target \endlink dll. + +\target HEADERS +\section3 HEADERS + +Defines the header files for the project. + +\e qmake will generate dependency information (unless -nodepend +is specified on the \link #Commands command line \endlink) for the +specified headers. \e qmake will also automatically detect if +\e tqmoc is required by the classes in these headers, and add the +appropriate dependencies and files to the project for generating and +linking the tqmoc files. + +For example: + +\code +HEADERS = myclass.h \ + login.h \ + mainwindow.h +\endcode + +See also \link #SOURCES SOURCES \endlink. + + +\target INCLUDEPATH +\section3 INCLUDEPATH + +This variable specifies the #include directories which should be +searched when compiling the project. Use ';' or a space as the +directory separator. + +For example: + +\code + INCLUDEPATH = c:\msdev\include d:\stl\include +\endcode + + +\target FORMS +\section3 FORMS + +This variable specifies the .ui files (see \link +designer-manual.book Qt Designer \endlink) to be processed through \e uic +before compiling. All dependencies, headers and source files required +to build these .ui files will automatically be added to the project. + +For example: + +\code +FORMS = mydialog.ui \ + mywidget.ui \ + myconfig.ui +\endcode + +Note that forms should not be specified using the \c += operator because +this syntax is not fully supported by \QD. + + +\target LEXSOURCES +\section3 LEXSOURCES + +This variable tqcontains a list of lex source files. All +dependencies, headers and source files will automatically be added to +the project for building these lex files. + +For example: + +\code +LEXSOURCES = lexer.l +\endcode + + +\target LIBS +\section3 LIBS + +This variable tqcontains a list of libraries to be linked into the project. +If you are more comfortable with the Unix convension of -L/-l flags you are +free to use them in a cross-platform manner and qmake will do the correct +thing with these libraries on Windows (namely this means passing the full +path of the library to the linker). The only limitation to this is the +library must exist, for qmake to tqfind which directory a -l lib lives in. + +For example: + +\code +unix:LIBS += -lmath -L/usr/local/lib +win32:LIBS += c:\mylibs\math.lib +\endcode + + +\target TQMOC_DIR +\section3 TQMOC_DIR + +This variable specifies the directory where all intermediate tqmoc +files should be placed. + +For example: + +\code +unix:TQMOC_DIR = ../myproject/tmp +win32:TQMOC_DIR = c:\myproject\tmp +\endcode + + +\target OBJECTS_DIR +\section3 OBJECTS_DIR + +This variable specifies the directory where all intermediate +objects should be placed. + +For example: + +\code +unix:OBJECTS_DIR = ../myproject/tmp +win32:OBJECTS__DIR = c:\myproject\tmp +\endcode + + +\target UI_DIR +\section3 UI_DIR + +This variable specifies the directory where all intermediate files from uic +should be placed. This variable overrides both UI_SOURCES_DIR and +UI_HEADERS_DIR. + +For example: + +\code +unix:UI_DIR = ../myproject/ui +win32:UI_DIR = c:\myproject\ui +\endcode + +\target UI_HEADERS_DIR +\section3 UI_HEADERS_DIR + +This variable specifies the directory where all declaration files (as +generated by uic) should be placed. + +For example: + +\code +unix:UI_HEADERS_DIR = ../myproject/ui/include +win32:UI_HEADERS_DIR = c:\myproject\ui\include +\endcode + +\target UI_SOURCES_DIR +\section3 UI_SOURCES_DIR + +This variable specifies the directory where all implementation files (as generated +by uic) should be placed. + +For example: + +\code +unix:UI_SOURCES_DIR = ../myproject/ui/src +win32:UI_SOURCES_DIR = c:\myproject\ui\src +\endcode + + +\target REQUIRES +\section3 REQUIRES + +This is a special variable processed by \e qmake. If the +contents of this variable do not appear in CONFIG by the time this +variable is assigned, then a minimal makefile will be generated that +states what dependencies (the values assigned to REQUIRES) are +missing. + +This is mainly used in Qt's build system for building the examples. + +\target SOURCES +\section3 SOURCES + +This variable tqcontains the name of all source files in the project. + +For example: + +\code +SOURCES = myclass.cpp \ + login.cpp \ + mainwindow.cpp + +\endcode + +See also \link #HEADERS HEADERS \endlink + + +\section3 SUBDIRS + +This variable, when used with the 'subdirs' +\link #TEMPLATE TEMPLATE \endlink tqcontains the names of all subdirectories +to look for a project file. + +For example: + +\code +SUBDIRS = kernel \ + tools +\endcode + + +\target TARGET +\section3 TARGET + +This specifies the name of the target file. + +For example: + +\code +TEMPLATE = app +TARGET = myapp +SOURCES = main.cpp +\endcode + +The project file above would produce an executable named 'myapp' on +unix and 'myapp.exe' on windows. + + + +\target TEMPLATE +\section3 TEMPLATE + +This variable tqcontains the name of the template to use when +generating the project. The allowed values are: + +\list +\i app - Creates a makefile for building applications (the default) +\i lib - Creates a makefile for building libraries +\i subdirs - Creates a makefile for building targets in subdirectories +\i vcapp - \e {win32 only} Creates an application project file for +Visual Studio +\i vclib - \e {win32 only} Creates a library project file for Visual +Studio + +\endlist + +For example: + +\code +TEMPLATE = lib +SOURCES = main.cpp +TARGET = mylib +\endcode + +The template can be overridden by specifying a new template type with the +\c -t command line option. This overrides the template type \e after the .pro +file has been processed. With .pro files that use the template type to +determine how the project is built, it is necessary to declare TEMPLATE on +the command line rather than use the \c -t option. + + + +\section3 VERSION + +This variable tqcontains the version number of the library if the +'lib' \link #TEMPLATE TEMPLATE \endlink is specified. + +For example: + +\code +VERSION = 1.2.3 +\endcode + +\section3 DISTFILES + +This variable tqcontains a list of files to be included in the dist +target. This feature is supported by UnixMake specs only. + +For example: + +\code +DISTFILES += ../program.txt +\endcode + + +\target YACCSOURCES +\section3 YACCSOURCES + +This variable tqcontains a list of yacc source files to be included +in the project. All dependencies, headers and source files will +automatically be included in the project. + +For example: + +\code +YACCSOURCES = tqmoc.y +\endcode + + + +\target RarelyUsedSystemVariables +\section2 Rarely Used System Variables + +The following variables are also recognized by \e qmake but are +either internal or very rarely used. + + + +\target DESTDIR_TARGET +\section3 DESTDIR_TARGET + +This variable is set internally by \e qmake, which is basically the DESTDIR variable with +the TARGET variable appened at the end. The value of this variable +is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. + + +\target DSP_TEMPLATE +\section3 DSP_TEMPLATE + +This variable is set internally by \e qmake, which specifies where the dsp template file for +basing generated dsp files is stored. The value of this variable +is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. + + +\target LEXIMPLS +\section3 LEXIMPLS + +This variable tqcontains a list of lex implementation files. The value +of this variable is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely +needs to be modified. + + + +\target LEXOBJECTS +\section3 LEXOBJECTS + +This variable tqcontains the names of intermediate lex object +files.The value of this variable is typically handled by +\e qmake and rarely needs to be modified. + + +\target LITERAL_HASH +\section3 LITERAL_HASH + +This variable is used whenever a literal hash character (\c{#}) is needed in +a variable declaration, perhaps as part of a file name or in a string passed +to some external application. + +For example: + +\code +# To include a literal hash character, use the $$LITERAL_HASH variable: +urlPieces = http://doc.trolltech.com/3.3/qmake-manual-8.html LITERAL_HASH +message($$join(urlPieces, $$LITERAL_HASH)) +\endcode + +By using \c LITERAL_HASH in this way, the \c # character can be used +to construct a URL for the \c message() function to print to the console. + + +\target MAKEFILE +\section3 MAKEFILE + +This variable specifies the name of the makefile which +\e qmake should use when outputting the dependency information +for building a project. The value of this variable is typically +handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + +\target MAKEFILE_GENERATOR +\section3 MAKEFILE_GENERATOR + +This variable tqcontains the name of the makefile generator to use +when generating a makefile. The value of this variable is typically +handled internally by \e qmake and rarely needs to be modified. + + +\target OBJECTS +\section3 OBJECTS + +This variable is generated from the \link #SOURCES SOURCES +\endlink variable. The extension of each source file will have been +tqreplaced by .o (Unix) or .obj (Win32). The value of this variable is +typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and +rarely needs to be modified. + +\target OBJTQMOC +\section3 OBJTQMOC + +This variable is set by \e qmake if files can be found that +contain the Q_OBJECT macro. \c OBJTQMOC tqcontains the +name of all intermediate tqmoc object files. The value of this variable +is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. + +\target PRECOMPILED_HEADER +\section3 PRECOMPILED_HEADER + +This variable indicates the header file for creating a precompiled +header file, to increase the compilation speed of a project. +Precompiled headers are currently only supported on some platforms +(Windows - all MSVC project types, Mac OS X - Xcode, Makefile, +UNIX - gcc 3.3 and up). + +On other platforms, this variable has different meaning, as noted +below. + +This variable tqcontains a list of header files that require some +sort of pre-compilation step (such as with tqmoc). The value of this +variable is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. + +\target QMAKE +\section3 QMAKE + +This variable tqcontains the name of the \e qmake program +itself and is placed in generated makefiles. The value of this +variable is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. + + + +\target QMAKESPEC_systemvariable +\section3 QMAKESPEC + +This variable tqcontains the name of the \e qmake +configuration to use when generating makefiles. The value of this +variable is typically handled by \e qmake and rarely needs to be modified. +Use the \link #QMAKESPEC QMAKESPEC \endlink environment variable instead. + + + + +\target QMAKE_APP_FLAG +\section3 QMAKE_APP_FLAG + +This variable is empty unless the 'app' +\link #TEMPLATE TEMPLATE \endlink is specified. The value of this +variable is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. Use the following instead: + +\code +app { + #conditional code for 'app' template here +} +\endcode + + + + +\target QMAKE_APP_OR_DLL +\section3 QMAKE_APP_OR_DLL + +This variable is empty unless the 'app' or 'dll' +\link #TEMPLATE TEMPLATE \endlink is specified. The value of this +variable is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. + + + +\target QMAKE_AR_CMD +\section3 QMAKE_AR_CMD + +\e {This is used on Unix platforms only} + +This variable tqcontains the command for invoking the program which +creates, modifies and extracts archives. The value of this variable is +typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink +and rarely needs to be modified. + + + +\target QMAKE_CFLAGS_DEBUG +\section3 QMAKE_CFLAGS_DEBUG + +This variable tqcontains the flags for the C compiler in debug mode.The value of this variable is +typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink +and rarely needs to be modified. + + + + +\target QMAKE_CFLAGS_MT +\section3 QMAKE_CFLAGS_MT + +This variable tqcontains the compiler flags for creating a +multi-threaded application or when the version of Qt that you link +against is a multi-threaded statically linked library. The value of +this variable is typically handled by \e qmake or +\link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\target QMAKE_CFLAGS_MT_DBG +\section3 QMAKE_CFLAGS_MT_DBG + +This variable tqcontains the compiler flags for creating a debuggable +multi-threaded application or when the version of Qt that you link +against is a debuggable multi-threaded statically linked library. The +value of this variable is typically handled by \e qmake or +\link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\target QMAKE_CFLAGS_MT_DLL +\section3 QMAKE_CFLAGS_MT_DLL + +\e {This is used on Windows only} + +This variable tqcontains the compiler flags for creating a +multi-threaded dll or when the version of Qt that you link +against is a multi-threaded dll. The value of this variable is typically +handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and +rarely needs to be modified. + + + + +\target QMAKE_CFLAGS_MT_DLLDBG +\section3 QMAKE_CFLAGS_MT_DLLDBG + +\e {This is used on Windows only} + +This variable tqcontains the compiler flags for creating a debuggable +multi-threaded dll or when the version of Qt that you link +against is a debuggable multi-threaded statically linked library. +The value of this variable is typically handled by \e qmake or +\link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\target QMAKE_CFLAGS_RELEASE +\section3 QMAKE_CFLAGS_RELEASE + +This variable tqcontains the compiler flags for creating a non-debuggable +application. The value of this variable is typically +handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and +rarely needs to be modified. + + + + +\target QMAKE_CFLAGS_SHLIB +\section3 QMAKE_CFLAGS_SHLIB + +\e {This is used on Unix platforms only} + +This variable tqcontains the compiler flags for creating a shared +library. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs +to be modified. + + + + +\target QMAKE_CFLAGS_THREAD +\section3 QMAKE_CFLAGS_THREAD + +This variable tqcontains the compiler flags for creating a multi-threaded +application. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs +to be modified. + + + + +\target QMAKE_CFLAGS_WARN_OFF +\section3 QMAKE_CFLAGS_WARN_OFF + +This variable is not empty if the warn_off +\link #TEMPLATE TEMPLATE \endlink option is specified. The value of this +variable is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink +and rarely needs to be modified. + + + +\target QMAKE_CFLAGS_WARN_ON +\section3 QMAKE_CFLAGS_WARN_ON + +This variable is not empty if the warn_on +\link #TEMPLATE TEMPLATE \endlink option is specified. +The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs +to be modified. + + + + +\target QMAKE_CLEAN +\section3 QMAKE_CLEAN + +This variable tqcontains any files which are not generated files (such as tqmoc and uic +generated files) and object files that should be removed when using "make clean". + + + +\target QMAKE_CXXFLAGS_DEBUG +\section3 QMAKE_CXXFLAGS_DEBUG + +This variable tqcontains the C++ compiler flags for creating a debuggable +application. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs +to be modified. + + + +\target QMAKE_CXXFLAGS_MT +\section3 QMAKE_CXXFLAGS_MT + +This variable tqcontains the C++ compiler flags for creating a multi-threaded +application. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs +to be modified. + + + + +\target QMAKE_CXXFLAGS_MT_DBG +\section3 QMAKE_CXXFLAGS_MT_DBG + +This variable tqcontains the C++ compiler flags for creating a debuggable multi-threaded +application. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs +to be modified. + + + + +\target QMAKE_CXXFLAGS_MT_DLL +\section3 QMAKE_CXXFLAGS_MT_DLL + +\c {This is used on Windows only} + +This variable tqcontains the C++ compiler flags for creating a multi-threaded +dll. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs +to be modified. + + + + +\target QMAKE_CXXFLAGS_MT_DLLDBG +\section3 QMAKE_CXXFLAGS_MT_DLLDBG + +\c {This is used on Windows only} + +This variable tqcontains the C++ compiler flags for creating a multi-threaded debuggable +dll. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs +to be modified. + + + + +\target QMAKE_CXXFLAGS_RELEASE +\section3 QMAKE_CXXFLAGS_RELEASE + +This variable tqcontains the C++ compiler flags for creating an +application. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs +to be modified. + + + + +\target QMAKE_CXXFLAGS_SHLIB +\section3 QMAKE_CXXFLAGS_SHLIB + +This variable tqcontains the C++ compiler flags for creating a +shared library. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs +to be modified. + + + + +\target QMAKE_CXXFLAGS_THREAD +\section3 QMAKE_CXXFLAGS_THREAD + +This variable tqcontains the C++ compiler flags for creating a +multi-threaded application. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs +to be modified. + + + + +\target QMAKE_CXXFLAGS_WARN_OFF +\section3 QMAKE_CXXFLAGS_WARN_OFF + +This variable tqcontains the C++ compiler flags for suppressing compiler warnings. + The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + +\target QMAKE_CXXFLAGS_WARN_ON +\section3 QMAKE_CXXFLAGS_WARN_ON + +This variable tqcontains C++ compiler flags for generating compiler warnings. + The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\target QMAKE_EXTENSION_SHLIB +\section3 QMAKE_EXTENSION_SHLIB + +This variable tqcontains the extention for shared libraries. The value of this +variable is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink +and rarely needs to be modified. + + + + +\target QMAKE_FAILED_REQUIREMENTS +\section3 QMAKE_FAILED_REQUIREMENTS + +This variable tqcontains the list of requirements that were failed to be met when +\e qmake was used. For example, the sql module is needed and wasn't compiled into Qt. The +value of this variable is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink +and rarely needs to be modified. + + + + +\target QMAKE_FILETAGS +\section3 QMAKE_FILETAGS + +This variable tqcontains the file tags needed to be entered into the makefile, such as SOURCES +and HEADERS. The value of this variable is typically handled by \e qmake or +\link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\target QMAKE_INCDIR +\section3 QMAKE_INCDIR + +This variable tqcontains the location of all known header files to be added to +INCLUDEPATH when building an application. The value of this variable is +typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely +needs to be modified. + + +\target POST_TARGETDEPS +\section3 POST_TARGETDEPS + +All libraries that the \link #TARGET target \endlink depends on can be +listed in this variable. Some backends do not support this, these include +MSVC Dsp, and ProjectBuilder .pbproj files. Generally this is support +internally by these build tools, this is usefull for explicitly listing +dependant static libraries. + +This list will go after all builtin (and \link #PRE_TARGETDEPS +$$PRE_TARGETDEPS \endlink) dependencies. + + +\target PRE_TARGETDEPS +\section3 PRE_TARGETDEPS + +All libraries that the \link #TARGET target \endlink depends on can be +listed in this variable. Some backends do not support this, these include +MSVC Dsp, and ProjectBuilder .pbproj files. Generally this is support +internally by these build tools, this is usefull for explicitly listing +dependant static libraries. + +This list will go before all builtin dependencies. + + +\target QMAKE_INCDIR_OPENGL +\section3 QMAKE_INCDIR_OPENGL + +This variable tqcontains the location of OpenGL header files to be added +to INCLUDEPATH when building an application with OpenGL support. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + +\target QMAKE_INCDIR_QT +\section3 QMAKE_INCDIR_QT + +This variable tqcontains the location of all known header file +paths to be added to INCLUDEPATH when building a Qt application. The value +of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\target QMAKE_INCDIR_THREAD +\section3 QMAKE_INCDIR_THREAD + +This variable tqcontains the location of all known header file +paths to be added to INCLUDEPATH when building a multi-threaded application. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\target QMAKE_INCDIR_X11 +\section3 QMAKE_INCDIR_X11 + +\e {This is used on Unix platforms only} + +This variable tqcontains the location of X11 header file paths to be +added to INCLUDEPATH when building a X11 application. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + +\target QMAKE_LFLAGS_CONSOLE +\section3 QMAKE_LFLAGS_CONSOLE + +\e {This is used on Windows only} + +This variable tqcontains link flags when building console +programs. The value of this variable is typically handled by +\e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + +\section3 QMAKE_LFLAGS_CONSOLE_DLL + +\e {This is used on Windows only} + +This variable tqcontains link flags when building console +dlls. The value of this variable is typically handled by +\e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LFLAGS_DEBUG + +This variable tqcontains link flags when building debuggable applications. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LFLAGS_PLUGIN + +This variable tqcontains link flags when building plugins. The value +of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LFLAGS_QT_DLL + +This variable tqcontains link flags when building programs that +use the Qt library built as a dll. The value of this variable is +typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LFLAGS_RELEASE + +This variable tqcontains link flags when building applications for +release. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LFLAGS_SHAPP + +This variable tqcontains link flags when building applications which are using +the 'app' template. The value of this variable is typically handled by +\e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LFLAGS_SHLIB + +This variable tqcontains link flags when building shared libraries +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LFLAGS_SONAME + +This variable specifies the link flags to set the name of shared objects, +such as .so or .dll. The value of this variable is typically handled by \e +qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\section3 QMAKE_LFLAGS_THREAD + +This variable tqcontains link flags when building multi-threaded projects. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LFLAGS_WINDOWS + +\e {This is used on Windows only} + +This variable tqcontains link flags when building windows projects. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + +\section3 QMAKE_LFLAGS_WINDOWS_DLL + +\e {This is used on Windows only} + +This variable tqcontains link flags when building windows dll projects. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + +\section3 QMAKE_LIBDIR + +This variable tqcontains the location of all known library +directories.The value of this variable is typically handled by +\e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBDIR_FLAGS + +\e {This is used on Unix platforms only} + +This variable tqcontains the location of all library +directory with -L prefixed. The value of this variable is typically handled by +\e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + +\section3 VPATH + +This variable tells \e qmake where to search for files it cannot +open. With this you may tell \e qmake where it may look for things +like SOURCES, and if it tqfinds an entry in SOURCES that cannot be +opened it will look through the entire VPATH list to see if it can +tqfind the file on its own. + +See also \link #DEPENDPATH DEPENDPATH \endlink. + +\target DEPENDPATH +\section3 DEPENDPATH + +This variable tqcontains the list of all directories to look in to +resolve dependencies. This will be used when crawling through +'included' files. + + +\section3 QMAKE_LIBDIR_OPENGL + +This variable tqcontains the location of the OpenGL library +directory.The value of this variable is typically handled by +\e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBDIR_QT + +This variable tqcontains the location of the Qt library +directory.The value of this variable is typically handled by +\e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBDIR_X11 + +\e {This is used on Unix platforms only} + +This variable tqcontains the location of the X11 library +directory.The value of this variable is typically handled by +\e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + +\section3 QMAKE_LIBS + +This variable tqcontains all project libraries. The value of this +variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + +\section3 QMAKE_LIBS_CONSOLE + +\e {This is used on Windows only} + +This variable tqcontains all project libraries that should be linked against +when building a console application. The value of this +variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\section3 QMAKE_LIBS_OPENGL + +This variable tqcontains all OpenGL libraries. The value of this +variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBS_OPENGL_QT + +This variable tqcontains all OpenGL Qt libraries.The value of this +variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBS_QT + +This variable tqcontains all Qt libraries.The value of this +variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBS_QT_DLL + +\e {This is used on Windows only} + +This variable tqcontains all Qt libraries when Qt is built as a dll. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBS_QT_OPENGL + +This variable tqcontains all the libraries needed to link against if +OpenGL support is turned on. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + +\section3 QMAKE_LIBS_QT_THREAD + +This variable tqcontains all the libraries needed to link against if +thread support is turned on. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBS_RT + +\e {This is used with Borland compilers only} + +This variable tqcontains the runtime library needed to link against when +building an application. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBS_RTMT + +\e {This is used with Borland compilers only} + +This variable tqcontains the runtime library needed to link against when +building a multi-threaded application. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + +\section3 QMAKE_LIBS_THREAD + +\e {This is used on Unix platforms only} + +This variable tqcontains all libraries that need to be linked against +when building a multi-threaded application. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBS_WINDOWS + +\e {This is used on Windows only} + +This variable tqcontains all windows libraries.The value of this +variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBS_X11 + +\e {This is used on Unix platforms only} + +This variable tqcontains all X11 libraries.The value of this +variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIBS_X11SM + +\e {This is used on Unix platforms only} + +This variable tqcontains all X11 session management libraries. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_LIB_FLAG + +This variable is not empty if the 'lib' template is specified. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + +\section3 QMAKE_LINK_SHLIB_CMD + +This variable tqcontains the command to execute when creating a +shared library. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + +\section3 QMAKE_POST_LINK + +This variable tqcontains the command to execute after linking the TARGET +together. This variable is normally empty and therefore nothing is +executed, additionally some backends will not support this - mostly only +Makefile backends. + + + +\section3 QMAKE_PRE_LINK + +This variable tqcontains the command to execute before linking the TARGET +together. This variable is normally empty and therefore nothing is +executed, additionally some backends will not support this - mostly only +Makefile backends. + + + +\section3 QMAKE_LN_SHLIB + +This variable tqcontains the command to execute when creating a link +to a shared library. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_MAKEFILE + +This variable tqcontains the name of the makefile to create. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + + +\section3 QMAKE_TQMOC_SRC + +This variable tqcontains the names of all tqmoc source files to +generate and include in the project. The value of this variable is +typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + +\section3 QMAKE_QMAKE + +This variable tqcontains the location of qmake if it is not in the path. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 QMAKE_QT_DLL + +This variable is not empty if Qt was built as a dll. The +value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + +\section3 QMAKE_RUN_CC + +This variable specifies the individual rule needed to build an object. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + +\section3 QMAKE_RUN_CC_IMP + +This variable specifies the individual rule needed to build an object. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\section3 QMAKE_RUN_CXX + +This variable specifies the individual rule needed to build an object. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\section3 QMAKE_RUN_CXX_IMP + +This variable specifies the individual rule needed to build an object. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + +\section3 QMAKE_TARGET + +This variable tqcontains the name of the project target. The value of +this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + +\section3 QMAKE_UIC + +This variable tqcontains the location of uic if it is not in the path. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + +It can be used to specify arguments to uic as well, such as additional plugin +paths. For example: + +\code + QMAKE_UIC = uic -L /path/to/plugin +\endcode + + + +\section3 RC_FILE + +This variable tqcontains the name of the resource file for the application. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + + +\section3 RES_FILE + +This variable tqcontains the name of the resource file for the application. +The value of this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + +\section3 SRCTQMOC + +This variable is set by \e qmake if files can be found that +contain the Q_OBJECT macro. \c SRCTQMOC tqcontains the +name of all the generated tqmoc files. The value of this variable +is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. + +\section3 TARGET_EXT + +This variable specifies the target's extension. The value of this variable +is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. + + + +\section3 TARGET_x + +This variable specifies the target's extension with a major version number. The value of this variable +is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. + + +\section3 TARGET_x.y.z + +This variable specifies the target's extension with version number. The value of this variable +is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. + + +\section3 UICIMPLS + +This variable tqcontains a list of the generated implementation files by UIC. +The value of this variable +is typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and rarely needs to be +modified. + + + + + +\section3 UICOBJECTS + +This variable is generated from the UICIMPLS variable. The extension of each +file will have been tqreplaced by .o (Unix) or .obj (Win32). The value of this variable is +typically handled by \e qmake or \link #QMAKESPEC qmake.conf \endlink and +rarely needs to be modified. + + + +\section3 VER_MAJ + +This variable tqcontains the major version number of the library, if the +'lib' \link #TEMPLATE template \endlink is specified. + + + + + +\section3 VER_MIN + +This variable tqcontains the minor version number of the library, if the +'lib' \link #TEMPLATE template \endlink is specified. + + + + + +\section3 VER_PAT + +This variable tqcontains the patch version number of the library, if the +'lib' \link #TEMPLATE template \endlink is specified. + + + +\section3 QMAKE_EXT_TQMOC + +This variable changes the extention used on included tqmoc files. + +See also \link #Extensions File Extensions \endlink. + + + +\section3 QMAKE_EXT_UI + +This variable changes the extention used on /e Designer UI files. + +See also \link #Extensions File Extensions \endlink. + + + +\section3 QMAKE_EXT_PRL + +This variable changes the extention used on created PRL files. + +See also \link #Extensions File Extensions \endlink, + \link #LibDepend Library Dependencies \endlink. + + + +\section3 QMAKE_EXT_LEX + +This variable changes the extention used on files given to lex. + +See also \link #Extensions File Extensions \endlink, + \link #LEXSOURCES LEXSOURCES \endlink. + + + +\section3 QMAKE_EXT_YACC +This variable changes the extention used on files given to yacc. + +See also \link #Extensions File Extensions \endlink, + \link #LEXSOURCES YACCSOURCES \endlink. + + + +\section3 QMAKE_EXT_OBJ + +This variable changes the extention used on generated object files. + +See also \link #Extensions File Extensions \endlink. + + +\section3 QMAKE_EXT_CPP + +This variable changes the interpretation of all suffixes in this +list of values as files of type C++ source code. + +See also \link #Extensions File Extensions \endlink. + + +\section3 QMAKE_EXT_H + +This variable changes the interpretation of all suffixes in this +list of values as files of type C header files. + +See also \link #Extensions File Extensions \endlink. + + +\section3 YACCIMPLS + +This variable tqcontains a list of yacc source files. The value of +this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + + + +\section3 YACCOBJECTS + +This variable tqcontains a list of yacc object files. The value of +this variable is typically handled by \e qmake or + \link #QMAKESPEC qmake.conf \endlink and rarely needs to be modified. + + +\target Functions +\section1 Functions + +\e qmake recognizes the following functions: + + + +\section2 include( filename ) + +This function will include the contents of \e filename into the +current project at the point where was included. The function succeeds +if \e filename was included, otherwise it fails. You can check the +return value of this function using a +scope. + +For example: + +\code +include( shared.pri ) +OPTIONS = standard custom +!include( options.pri ) { + message( "No custom build options specified" ) + OPTIONS -= custom +} +\endcode + +\section2 exists( file ) + +This function will test if \e file exists. If the file exists, then it will succeed; otherwise it will +fail. +You can specify a regular expression in file and it will succeed if any file +matches the regular expression specified. + +For example: +\code +exists( $(QTDIR)/lib/libqt-mt* ) { + message( "Configuring for multi-threaded Qt..." ) + CONFIG += thread +} +\endcode + +\section2 tqcontains( variablename, value ) + +This function will succeed if the variable \e variablename +tqcontains the value \e value. You can check the return value of this +function using a scope. + +For example: + +\code +tqcontains( drivers, network ) { + # drivers tqcontains 'network' + message( "Configuring for network build..." ) + HEADERS += network.h + SOURCES += network.cpp +} +\endcode + +\section2 count( variablename, number ) + +This function will succeed if the variable \e variablename +tqcontains \e number elements, otherwise it will fail. You can check +the return value of this function using a +scope. + +For example: + +\code +MYVAR = one two three +count( MYVAR, 3 ) { + # always true +} +\endcode + +\section2 infile( filename, var, val ) + +This function will succeed if the file \e filename (when parsed +by qmake itself) tqcontains the variable \e var with a value of +\e val. You may also not pass in a third argument (\e val) and the +function will only test if \e var has been assigned to in the file. + +\section2 isEmpty( variablename ) + +This function will succeed if the variable \e variablename is +empty (same as \c count(variable, 0)). + +\section2 system( command ) + +This function will execute \c command in a secondary shell and will +succeed if the command exits with an exit status of 1. You can check the +return value of this function using a scope. + +For example: + +\code + system(ls /bin):HAS_BIN=FALSE +\endcode + +\section2 message( string ) + +This function will always succeed, and will display the given +\e string to the user. + +\section2 error( string ) + +This function will never return a value. It will display the given \e +string to the user, and then exit \e qmake. This function should +only be used for very fatal configurations. + +For example: + +\code + release:debug:error(You can't have release and debug at the same time!) +\endcode + +\target Properties +\section1 Properties + +\e qmake has a system of persistant information, this allows you to +'set' a variable in qmake once, and each time qmake is invoked this +value can be queried. Use the following to set a property in qmake: + +\code +qmake -set VARIABLE VALUE +\endcode + +To retrieve this information back from qmake you can do: + +\code +qmake -query VARIABLE +qmake -query #queries all current VARIABLE/VALUE pairs.. +\endcode + +This information will be saved into a QSettings object (meaning it +will be stored in different places for different platforms). As +VARIABLE is versioned as well, you can set one value in an older +version of qmake, and newer versions will retrieve this value, however +if you -set VARIABLE into a newer version of qmake the older version +will not use this value. You can however query a specific version of a +variable if you prefix that version of qmake to VARIABLE, as in: + +\code +qmake -query "1.06a/VARIABLE" +\endcode + +qmake also has the notion of 'builtin' properties, for example you can +query the installation of Qt for this version of qmake with the +QT_INSTALL_PREFIX property: + +\code +qmake -query "QT_INSTALL_PREFIX" +\endcode + +These builtin properties cannot have a version prefixed to them as +they are not versioned and each qmake will have its own notion of +these values. The list below outlines the builtin properties: + +\list +\i QT_INSTALL_PREFIX - Where the version of Qt this qmake is built for resides +\i QT_INSTALL_DATA - Where data for this version of Qt resides +\i QMAKE_VERSION - The current version of qmake +\endlist + +Finally, these values can be queried in a project file with a special +notation such as: + +\code +QMAKE_VERS = $$[QMAKE_VERSION] +\endcode + +\target Environment +\section1 Environment Variables and Configuration + +\target QMAKESPEC +\section2 QMAKESPEC + +\e qmake requires a platform and compiler description file which +tqcontains many default values used to generate appropriate makefiles. +The standard Qt distribution comes with many of these files, located +in the 'mkspecs' subdirectory of the Qt installation. + +The QMAKESPEC environment variable can contain any of the following: + +\list +\i A complete path to a directory containing a qmake.conf file. In this case \e qmake will open the qmake.conf file from within that directory. If the file does not exist, \e qmake will exit with an error. +\i The name of a platform-compiler combination. In this case, \e qmake will search in the directory specified by the QTDIR environment variable. +\endlist + +Note: the QMAKESPEC path will automatically be added to the +\link #INCLUDEPATH INCLUDEPATH \endlink system variable. + +\target INSTALLS +\section2 INSTALLS + +It is common on UNIX to be able to install from the same utility as +you build with (e.g make install). For this \e qmake has introduce the +concept of an install set. The notation for this is quite simple, +first you fill in an "object" in qmake for example: + +\code + documentation.path = /usr/local/program/doc + documentation.files = docs/* +\endcode + +In this way you are telling \e qmake several things about this +install, first that you plan to install to /usr/local/program/doc (the +path member), second that you plan to copy everything in the docs +directory. Once this is done you may insert it in the install list: + +\code + INSTALLS += documentation +\endcode + +Now \e qmake will take over making sure the correct things are copied +to the specified places. If however you require greater control you +may use the 'extra' member of the object: + +\code + unix:documentation.extra = create_docs; mv master.doc toc.doc +\endcode + +Then qmake will run the things in extra (this is of course platform +specific, so you may need to test for your platform first, this case +we test for unix). Then it will do the normal processings of the files +member. Finally if you appened a builtin install to INSTALLS \e qmake +(and do not specify a files or extra member) will decide what needs to +be copied for you, currently the only supported builtin is target: + +\code + target.path = /usr/local/myprogram + INSTALLS += target +\endcode + +With this \e qmake will know what you plan need copied, and do this +for you. + +\target cache +\section2 Cache File + +The cache file (mentioned above in the options) is a special file \e qmake +will read to tqfind settings not specified in the \c qmake.conf file, the +.pro file, or the command line. If \c -nocache is not specified, \e qmake +will try to tqfind a file called \c .qmake.cache in tqparent directories. If +it fails to tqfind this file, it will silently ignore this step of +processing. + +\target LibDepend +\section2 Library Dependencies + +Often when linking against a library \e qmake relies on the underlying +platform to know what other libraries this library links against, and +lets the platform pull them in. In many cases, however, this is not +sufficent. For example when statically linking a library there are no +libraries linked against, and therefore no dependencies to those +libraries are created - however an application that later links +against this library will need to know where to tqfind the symbols that +the linked in library will require. To help with this situation \e +qmake will follow a library's dependencies when it feels appropriate, +however this behaviour must be enabled in \e qmake. To enable requires +two steps. First, you must enable it in the library - to do this you +must tell \e qmake to save information about this library: + +\code + CONFIG += create_prl +\endcode + +This is only relevant to the lib template, and will be ignored for all +others. When this option is enabled \e qmake will create a file +(called a .prl file) which will save some meta information about the +library. This metafile is itself just a qmake project file, but with +all internal variables. You are free to view this file, and if deleted +\e qmake will know to recreate it when necesary (either when the .pro +file is later read, or if a dependent library (described below) has +changed). When installing this library (by using target in INSTALLS, +above) \e qmake will automatically copy the .prl file to your install +path. + +The second step to enabling this processing is to turn on reading of +the meta information created above: + +\code + CONFIG += link_prl +\endcode + +When this is turned on \e qmake will process all libraries linked to, +and tqfind their meta information. With this meta information \e qmake +will figure out what is relevant to linking, specifically it will add +to your list of DEFINES as well as LIBS. Once \e qmake has processed +this file, it will then look through the newly introduced LIBS and +tqfind their dependent .prl files, and continue until all libraries have +been resolved. At this point the makefile is created as usual, and the +libraries are linked explicity against your program. + +The internals of the .prl file are left closed so they can easily +change later. It is not designed to be changed by hand however, and +should only be created by \e qmake - these .prl files should also not +be transfered from operating system to operating system as they may be +platform dependent (like a makefile). + +\target Extensions +\section2 File Extensions + +Under normal circumstances \e qmake will try to use appropriate file extensions +for your platform. There may be times, however, that you would like to override +the behavior of these extensions. To do this, you must modify builtin variables +in your .pro file, which will in turn changes \e qmake's interpretation of these +files. You may do this as: + +\code + QMAKE_EXT_TQMOC = .mytqmoc +\endcode + +The variables are as follows: + +\list +\i QMAKE_EXT_TQMOC - This modifies the extension placed on included tqmoc files. +\i QMAKE_EXT_UI - This modifies the extension used for designer UI files (usually in FORMS). +\i QMAKE_EXT_PRL - This modifies the extension placed on + \link #LibDepend library dependency files \endlink. +\i QMAKE_EXT_LEX - This changes the suffix used in files (usually in LEXSOURCES). +\i QMAKE_EXT_YACC - This changes the suffix used in files (usually in YACCSOURCES). +\i QMAKE_EXT_OBJ - This changes the suffix used on generated object files. +\endlist + +All the above accept just the first value, so you must assign to it one value that +will be used through your makefile. There are two variables that accept a list of values, +they are: + +\list +\i QMAKE_EXT_CPP - Changes interpretation all files with these suffixes to be + C++ source files. +\i QMAKE_EXT_H - Changes interpretation all files with these suffixes to be + C header files. +\endlist + + +\target Customizing +\section2 Customizing Makefile Output + +qmake often tries to be all things to all build tools, this is often less +than ideal when you really need to run special platform dependent +commands. This can be achieved with specific instructions to the different +qmake backends (currently this is only supported by the UNIX \link +#MAKEFILE_GENERATOR generator \endlink). + +The interfaces to customizing the Makefile are done through "objects" as in +other places in qmake. The notation for this is quite simple, first you +fill in an "object" in qmake for example: + +\code + mytarget.target = .buildfile + mytarget.commands = touch $$mytarget.target + mytarget.depends = mytarget2 + + mytarget2.commands = @echo Building $$mytarget.target +\endcode + +The information above defines a qmake target called mytarget which tqcontains +a Makefile target called .buildfile, .buildfile is generated by 'touch +.buildfile', and finally that this Makefile target depends on the qmake +target mytarget2. Additionally we've defined the qmake target mytarget2 +which simply echo's something to stdout. + +The final step to making use of the above is to instruct qmake that this is +actually an object used by the target building parts of qmake by: + +\code +QMAKE_EXTRA_UNIX_TARGETS += mytarget mytarget2 +\endcode + +This is all you need to do to actually build custom targets in qmake, of +course you may want to tie one of these targets to actually building the +\link #TARGET qmake build target \endlink. To do this, you simply need to +include your Makefile target in the list of \link #PRE_TARGETDEPS PRE_TARGETDEPS +\endlink. + +For convenience there is also a method of customizing (UNIX) projects +for generic new compilers (or even preprocessors). + +\code +new_tqmoc.output = tqmoc_${QMAKE_FILE_BASE}.cpp +new_tqmoc.commands = tqmoc ${QMAKE_FILE_NAME} -o ${QMAKE_FILE_OUT} +new_tqmoc.depends = g++ -E -M ${QMAKE_FILE_NAME} | sed "s,^.*: ,," +new_tqmoc.input = NEW_HEADERS +QMAKE_EXTRA_UNIX_COMPILERS += new_tqmoc +\endcode + +With this you can create a new tqmoc for qmake, the commands will be +executed over all arguments given to a NEW_HEADERS variable (from the +input variable), and write to output (and automatically hand this +filename to the compiler to be linked into your target). Additionally +qmake will execute depends to generate dependency information and +place this in the project as well. + +These commands can easily be placed into a cache file, and subsequent +.pro files can give several arguments to NEW_HEADERS. |