path: root/ksystemlog/doc/Makefile

# Makefile.in generated by automake 1.7.9 from Makefile.am.
# KDE tags expanded automatically by am_edit - $Revision: 1.7 $ 
# ksystemlog/doc/Makefile.  Generated from Makefile.in by config.pl.

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# the SUBDIRS is filled automatically by am_edit. If files are 
# in this directory they are installed into the english dir

srcdir = .
top_srcdir = ../..
VPATH = .
pkgdatadir = $(datadir)/ksystemlog
pkglibdir = $(libdir)/ksystemlog
pkgincludedir = $(includedir)/ksystemlog
top_builddir = ../..

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c -p
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-linux-gnu
host_triplet = i686-pc-linux-gnu
target_triplet = i686-pc-linux-gnu
ACLOCAL = ${SHELL} /root/ksystemlog/ksystemlog-0.3.2/admin/missing --run aclocal-1.7
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /root/ksystemlog/ksystemlog-0.3.2/admin/missing --run tar
AR = ar
ARTSCCONFIG = /usr/bin/artsc-config
AUTOCONF = $(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure
AUTODIRS = 
AUTOHEADER = ${SHELL} /root/ksystemlog/ksystemlog-0.3.2/admin/missing --run autoheader
AUTOMAKE = ${SHELL} /root/ksystemlog/ksystemlog-0.3.2/admin/missing --run automake-1.7
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -ansi -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute
CONF_FILES =  $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in
CPP = gcc -E
CPPFLAGS =  -DQT_THREAD_SUPPORT  -D_REENTRANT
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common
CYGPATH_W = echo
DCOPIDL = /usr/bin/dcopidl
DCOPIDL2CPP = /usr/bin/dcopidl2cpp
DCOPIDLNG = /usr/bin/dcopidlng
DCOP_DEPENDENCIES = $(DCOPIDL) $(DCOPIDLNG)
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
F77 = 
FFLAGS = 
FRAMEWORK_COREAUDIO = 
GMSGFMT = /usr/bin/msgfmt
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL} $(INSTALL_STRIP_FLAG)
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
KCFG_DEPENDENCIES = $(KCONFIG_COMPILER)
KCONFIG_COMPILER = /usr/bin/tdeconfig_compiler
KDECONFIG = /usr/bin/tde-config
KDE_EXTRA_RPATH = 
KDE_INCLUDES = -I/usr/include/tde
KDE_LDFLAGS = -L/usr/lib
KDE_MT_LDFLAGS = 
KDE_MT_LIBS = -lpthread
KDE_NO_UNDEFINED = -Wl,--no-undefined -Wl,--allow-shlib-undefined
KDE_PLUGIN = -avoid-version -module -no-undefined $(KDE_NO_UNDEFINED) $(KDE_RPATH) $(KDE_MT_LDFLAGS)
KDE_RPATH = -R $(kde_libraries) -R $(qt_libraries) -R $(x_libraries)
KDE_USE_CLOSURE_FALSE = 
KDE_USE_CLOSURE_TRUE = #
KDE_USE_FINAL_FALSE = 
KDE_USE_FINAL_TRUE = #
KDE_USE_NMCHECK_FALSE = 
KDE_USE_NMCHECK_TRUE = #
KDE_XSL_STYLESHEET = /usr/share/apps/ksgmltools2/customization/kde-chunk.xsl
LDFLAGS = 
LIBCOMPAT = 
LIBCRYPT = -lcrypt
LIBDL = -ldl
LIBJPEG = -ljpeg
LIBOBJS = 
LIBPNG = -lpng -lz -lm
LIBPTHREAD = -lpthread
LIBRESOLV = -lresolv
LIBS = 
LIBSM = -lSM -lICE
LIBSOCKET = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool --silent
LIBUCB = 
LIBUTIL = -lutil
LIBZ = -lz
LIB_KAB = -lkab
LIB_KABC = -lkabc
LIB_TDECORE = -ltdecore
LIB_TDEPIM = -ltdepim
LIB_TDEPRINT = -ltdeprint
LIB_TDEUI = -ltdeui
LIB_KFILE = -lkio
LIB_KFM = 
LIB_KHTML = -ltdehtml
LIB_KIO = -lkio
LIB_KPARTS = -ltdeparts
LIB_KSPELL = -ltdespell
LIB_KSYCOCA = -lkio
LIB_KUTILS = -ltdeutils
LIB_POLL = 
LIB_QPE = 
LIB_QT = -lqt-mt  $(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM) -lpthread
LIB_SMB = -lsmb
LIB_X11 = -lX11 $(LIBSOCKET)
LIB_XEXT = -lXext
LIB_XRENDER = 
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /root/ksystemlog/ksystemlog-0.3.2/admin/missing --run makeinfo
MCOPIDL = /usr/bin/mcopidl
MEINPROC = /usr/bin/meinproc
MOC = /usr/share/qt3/bin/moc
MSGFMT = /usr/bin/msgfmt
NOOPT_CFLAGS = -O0
NOOPT_CXXFLAGS = -O0
OBJEXT = o
PACKAGE = ksystemlog
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_VERSION = 
PATH_SEPARATOR = :
PERL = /usr/bin/perl
QTE_NORTTI = 
QT_INCLUDES = -I/usr/share/qt3/include
QT_LDFLAGS = -L/usr/share/qt3/lib
RANLIB = ranlib
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
TOPSUBDIRS =  ksystemlog
UIC = /usr/share/qt3/bin/uic -L $(kde_widgetdir) -nounload
UIC_TR = tr2i18n
USER_INCLUDES = 
USER_LDFLAGS = 
USE_EXCEPTIONS = -fexceptions
USE_RTTI = 
USE_THREADS = 
VERSION = 0.1
WOVERLOADED_VIRTUAL = 
XGETTEXT = /usr/bin/xgettext
XMLLINT = /usr/bin/xmllint
X_EXTRA_LIBS = 
X_INCLUDES = -I.
X_LDFLAGS = -L/usr/lib
X_PRE_LIBS = 
X_RPATH = -R $(x_libraries)
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = 
ac_ct_RANLIB = ranlib
ac_ct_STRIP = strip
all_includes = -I/usr/include/tde -I/usr/share/qt3/include -I. 
all_libraries = -L/usr/lib -L/usr/share/qt3/lib 
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = 
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = i686-pc-linux-gnu
host_alias = 
host_cpu = i686
host_os = linux-gnu
host_vendor = pc
include_ARTS_FALSE = #
include_ARTS_TRUE = 
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /root/ksystemlog/ksystemlog-0.3.2/admin/install-sh
kde_appsdir = ${datadir}/applnk
kde_bindir = ${exec_prefix}/bin
kde_confdir = ${datadir}/config
kde_datadir = ${datadir}/apps
kde_htmldir = ${datadir}/doc/tde/HTML
kde_icondir = ${datadir}/icons
kde_includes = /usr/include/tde
kde_kcfgdir = ${datadir}/config.kcfg
kde_libraries = /usr/lib
kde_libs_htmldir = /usr/share/doc/tde/HTML
kde_libs_prefix = /usr
kde_locale = ${datadir}/locale
kde_mimedir = ${datadir}/mimelnk
kde_moduledir = ${libdir}/trinity
kde_qtver = 3
kde_servicesdir = ${datadir}/services
kde_servicetypesdir = ${datadir}/servicetypes
kde_sounddir = ${datadir}/sounds
kde_styledir = ${libdir}/trinity/plugins/styles
kde_templatesdir = ${datadir}/templates
kde_wallpaperdir = ${datadir}/wallpapers
kde_widgetdir = /usr/lib/trinity/plugins/designer
tdeinitdir = $(kde_moduledir)
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
oldincludedir = /usr/include
prefix = /usr
program_transform_name = s,x,x,
qt_includes = /usr/share/qt3/include
qt_libraries = /usr/share/qt3/lib
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target = i686-pc-linux-gnu
target_alias = 
target_cpu = i686
target_os = linux-gnu
target_vendor = pc
x_includes = .
x_libraries = /usr/lib
xdg_appsdir = ${datadir}/applications/tde
xdg_directorydir = ${datadir}/desktop-directories
xdg_menudir = ${sysconfdir}/xdg/menus

KDE_LANG = en
KDE_DOCS = ksystemlog
#>- SUBDIRS = $(AUTODIRS)  
#>+ 1
SUBDIRS =. en
subdir = ksystemlog/doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
DIST_SOURCES =

#>- RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
#>- 	ps-recursive install-info-recursive uninstall-info-recursive \
#>- 	all-recursive install-data-recursive install-exec-recursive \
#>- 	installdirs-recursive install-recursive uninstall-recursive \
#>- 	check-recursive installcheck-recursive
#>+ 5
RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
	ps-recursive install-info-recursive uninstall-info-recursive \
	all-recursive install-data-recursive install-exec-recursive \
	installdirs-recursive install-recursive uninstall-recursive \
	check-recursive installcheck-recursive nmcheck-recursive bcheck-recursive
DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
DIST_SUBDIRS = $(SUBDIRS)
#>- all: all-recursive
#>+ 1
all: docs-am  all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
#>- 	cd $(top_srcdir) && \
#>- 	  $(AUTOMAKE) --gnu  ksystemlog/doc/Makefile
#>+ 3
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  ksystemlog/doc/Makefile
	cd $(top_srcdir) && perl admin/am_edit ksystemlog/doc/Makefile.in
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ETAGS = etags
ETAGSFLAGS =

CTAGS = ctags
CTAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if (etags --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	else \
	  include_option=--include; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$tags$$unique" \
	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	     $$tags $$unique

ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
#>+ 1
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)

top_distdir = ../..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$(top_distdir)" \
	        distdir=../$(distdir)/$$subdir \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:

install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean  clean-recursive

#>- clean-am: clean-generic clean-libtool mostlyclean-am
#>+ 1
clean-am: clean-bcheck  clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

info: info-recursive

info-am:

install-data-am:

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
	clean-generic clean-libtool clean-recursive ctags \
	ctags-recursive distclean distclean-generic distclean-libtool \
	distclean-recursive distclean-tags distdir dvi dvi-am \
	dvi-recursive info info-am info-recursive install install-am \
	install-data install-data-am install-data-recursive \
	install-exec install-exec-am install-exec-recursive \
	install-info install-info-am install-info-recursive install-man \
	install-recursive install-strip installcheck installcheck-am \
	installdirs installdirs-am installdirs-recursive \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-generic \
	mostlyclean-libtool mostlyclean-recursive pdf pdf-am \
	pdf-recursive ps ps-am ps-recursive tags tags-recursive \
	uninstall uninstall-am uninstall-info-am \
	uninstall-info-recursive uninstall-recursive

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

#>+ 2
KDE_DIST=Makefile.in 

#>+ 2
docs-am:

#>+ 6
force-reedit:
		cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  ksystemlog/doc/Makefile
	cd $(top_srcdir) && perl admin/am_edit ksystemlog/doc/Makefile.in


#>+ 21
clean-bcheck: 
	rm -f *.bchecktest.cc *.bchecktest.cc.class a.out

bcheck: bcheck-recursive

bcheck-am:
	@for i in ; do \
	    if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
	        echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
	        echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
	        echo "$$i"; \
	        if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(KDE_CXXFLAGS)  --dump-class-hierarchy -c $$i.bchecktest.cc; then \
	            rm -f $$i.bchecktest.cc; exit 1; \
	        fi ; \
	        echo "" >> $$i.bchecktest.cc.class; \
	        perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
	        rm -f a.out; \
	    fi ; \
	done


#>+ 3
final:
	$(MAKE) all-am

#>+ 3
final-install:
	$(MAKE) install-am

#>+ 3
no-final:
	$(MAKE) all-am

#>+ 3
no-final-install:
	$(MAKE) install-am

#>+ 3
cvs-clean:
	$(MAKE) admindir=$(top_srcdir)/admin -f $(top_srcdir)/admin/Makefile.common cvs-clean

#>+ 3
kde-rpo-clean:
	-rm -f *.rpo

#>+ 3
nmcheck: 
nmcheck-am: nmcheck