1 files changed, 599 insertions, 0 deletions
diff --git a/tde-i18n-hi/messages/tdeadmin/kcmlilo.po b/tde-i18n-hi/messages/tdeadmin/kcmlilo.po
new file mode 100644
index 00000000000..240aef76bb5
--- /dev/null
+++ b/tde-i18n-hi/messages/tdeadmin/kcmlilo.po
@@ -0,0 +1,599 @@
+# translation of kcmlilo.po to Hindi
+# Ravishankar Shrivastava <raviratlami@yahoo.com>, 2004.
+# Ravishankar Shrivastava <raviratlami@gmail.com>, 2004.
+msgid ""
+msgstr ""
+"Project-Id-Version: kcmlilo\n"
+"POT-Creation-Date: 2007-03-13 02:18+0100\n"
+"PO-Revision-Date: 2004-12-24 12:00+0530\n"
+"Last-Translator: Ravishankar Shrivastava <raviratlami@gmail.com>\n"
+"Language-Team: Hindi <indlinux-hindi@lists.sourceforge.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: kde-qt-common/EditWidget.cpp:43
+msgid "Select..."
+msgstr "चुनें..."
+
+#: kde-qt-common/expert.cpp:41
+msgid ""
+"You can edit the lilo.conf file directly here. All changes you make here are "
+"automatically transferred to the graphical interface."
+msgstr ""
+"आप यहाँ सीधे ही lilo.conf फ़ाइल को संपादित कर सकते हैं. सभी परिवर्तन जो आप यहाँ "
+"करेंगे वे चित्रमय इंटरफेस पर स्वचलित स्थानांतरित हो जाएँगे."
+
+#: kde-qt-common/general.cpp:45
+msgid "Install &boot record to drive/partition:"
+msgstr "ड्राइव/पार्टीशन पर बूट रेकॉर्ड संस्थापित करें: (&b)"
+
+#: kde-qt-common/general.cpp:55
+msgid ""
+"Select the drive or partition you want to install the LILO boot loader to here. "
+"Unless you intend to use other boot managers in addition to LILO, this should "
+"be the MBR (master boot record) of your boot drive."
+"<br>In this case, you should probably select <i>/dev/hda</i> "
+"if your boot drive is an IDE drive or <i>/dev/sda</i> "
+"if your boot drive is SCSI."
+msgstr ""
+"लिलो बूट लोडर यहाँ संस्थापित करने के लिए ड्राइव या पार्टीशन चुनें. जब तक आपका "
+"मंतव्य लिलो के अतिरिक्त अन्य बूट प्रबंधकों के उपयोग का नहीं है, यह आपके बूट "
+"ड्राइव का एमबीआर (मास्टर बूट रेकॉर्ड) होना चाहिए."
+"<br>यदि ऐसा है, संभवतः आपको चुनना चाहिए <i>/dev/hda</i> "
+"यदि आपका ड्राइव आईडीई ड्राइव है या <i>/dev/sda</i> यदि आपका ड्राइव स्कसी है."
+
+#: kde-qt-common/general.cpp:58
+msgid "Boot the default kernel/OS &after:"
+msgstr "इतनी देर के बाद डिफ़ॉल्ट कर्नेल/ओएस बूट करें : (&a)"
+
+#: kde-qt-common/general.cpp:60
+msgid "/10 seconds"
+msgstr "/10 सेकण्ड"
+
+#: kde-qt-common/general.cpp:64
+msgid ""
+"LILO will wait the amount of time specified here before booting the kernel (or "
+"OS) marked as <i>default</i> in the <b>Images</b> tab."
+msgstr ""
+"कर्नेल (या ओएस) जो कि तारांकित है <i>डिफ़ॉल्ट</i> रूप में <b>इमेजेस</b> "
+"टैब में, उसे बूट करने से पहले लिलो उल्लेखित समय तक इंतजार करेगा."
+
+#: kde-qt-common/general.cpp:67
+msgid "Use &linear mode"
+msgstr "लीनियर मोड इस्तेमाल करें (&l)"
+
+#: kde-qt-common/general.cpp:69
+msgid ""
+"Check this box if you want to use the linear mode."
+"<br>Linear mode tells the boot loader the location of kernels in linear "
+"addressing rather than sector/head/cylinder."
+"<br>linear mode is required for some SCSI drives, and shouldn't hurt unless "
+"you're planning to create a boot disk to be used with a different computer."
+"<br>See the lilo.conf man page for details."
+msgstr ""
+
+#: kde-qt-common/general.cpp:70
+msgid "Use &compact mode"
+msgstr "कॉम्पेक्ट मोड इस्तेमाल करें (&c)"
+
+#: kde-qt-common/general.cpp:72
+msgid ""
+"Check this box if you want to use the compact mode."
+"<br>The compact mode tries to merge read requests for adjacent sectors into a "
+"single read request. This reduces load time and keeps the boot map smaller, but "
+"will not work on all systems."
+msgstr ""
+
+#: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85
+msgid "&Record boot command lines for defaults"
+msgstr "डिफ़ॉल्ट के लिए बूट कमांड पंक्ति रेकॉर्ड करें (&R)"
+
+#: kde-qt-common/general.cpp:78
+msgid ""
+"Checking this box enables automatic recording of boot command lines as the "
+"defaults for the following boots. This way, lilo \"locks\" on a choice until it "
+"is manually overridden.\n"
+"This sets the <b>lock</b> option in lilo.conf."
+msgstr ""
+
+#: kde-qt-common/general.cpp:79 kde/Details.cpp:84 qt/Details.cpp:87
+msgid "R&estrict parameters"
+msgstr "पैमाने सीमित करेंीटर्स (&e)"
+
+#: kde-qt-common/general.cpp:82
+msgid ""
+"If this box is checked, a password (entered below) is required only if any "
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
+"linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"This sets the <b>restricted</b> option in lilo.conf."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+
+#: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93
+msgid "Require &password:"
+msgstr "वांछित पासवर्डः (&p)"
+
+#: kde-qt-common/general.cpp:93
+msgid ""
+"Enter the password required for bootup (if any) here. If <i>restricted</i> "
+"above is checked, the password is required for additional parameters only."
+"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
+"You'll want to make sure nobody untrusted can read this file. Also, you "
+"probably don't want to use your normal/root password here."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+
+#: kde-qt-common/general.cpp:97
+msgid "&Default graphics mode on text console:"
+msgstr "पाठ कंसोल पर डिफ़ॉल्ट ग्राफिक मोड (&D)"
+
+#: kde-qt-common/general.cpp:100
+msgid ""
+"You can select the default graphics mode here."
+"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
+"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
+"boot time."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+
+#: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48
+msgid "default"
+msgstr "डिफ़ॉल्ट"
+
+#: kde-qt-common/general.cpp:102 kde/Details.cpp:49 qt/Details.cpp:49
+msgid "ask"
+msgstr "पूछें"
+
+#: kde-qt-common/general.cpp:103 kde/Details.cpp:50 qt/Details.cpp:50
+msgid "text 80x25 (0)"
+msgstr "पाठ 80x25 (0)"
+
+#: kde-qt-common/general.cpp:104 kde/Details.cpp:51 qt/Details.cpp:51
+msgid "text 80x50 (1)"
+msgstr "पाठ 80x50 (1)"
+
+#: kde-qt-common/general.cpp:105 kde/Details.cpp:52 qt/Details.cpp:52
+msgid "text 80x43 (2)"
+msgstr "पाठ 80x43 (2)"
+
+#: kde-qt-common/general.cpp:106 kde/Details.cpp:53 qt/Details.cpp:53
+msgid "text 80x28 (3)"
+msgstr "पाठ 80x28 (3)"
+
+#: kde-qt-common/general.cpp:107 kde/Details.cpp:54 qt/Details.cpp:54
+msgid "text 80x30 (4)"
+msgstr "पाठ 80x30 (4)"
+
+#: kde-qt-common/general.cpp:108 kde/Details.cpp:55 qt/Details.cpp:55
+msgid "text 80x34 (5)"
+msgstr "पाठ 80x34 (5)"
+
+#: kde-qt-common/general.cpp:109 kde/Details.cpp:56 qt/Details.cpp:56
+msgid "text 80x60 (6)"
+msgstr "पाठ 80x60 (6)"
+
+#: kde-qt-common/general.cpp:110 kde/Details.cpp:57 qt/Details.cpp:57
+msgid "text 40x25 (7)"
+msgstr "पाठ 40x25 (7)"
+
+#: kde-qt-common/general.cpp:111 kde/Details.cpp:58 qt/Details.cpp:58
+msgid "VGA 640x480, 256 colors (769)"
+msgstr "वीजीए 640x480, 256 रंग (769)"
+
+#: kde-qt-common/general.cpp:112 kde/Details.cpp:59 qt/Details.cpp:59
+msgid "VGA 640x480, 32767 colors (784)"
+msgstr "वीजीए 640x480, 32767 रंग (784)"
+
+#: kde-qt-common/general.cpp:113 kde/Details.cpp:60 qt/Details.cpp:60
+msgid "VGA 640x480, 65536 colors (785)"
+msgstr "वीजीए 640x480, 65536 रंग (785)"
+
+#: kde-qt-common/general.cpp:114 kde/Details.cpp:61 qt/Details.cpp:61
+msgid "VGA 640x480, 16.7M colors (786)"
+msgstr "वीजीए 640x480, 16.7M रंग (786)"
+
+#: kde-qt-common/general.cpp:115 kde/Details.cpp:62 qt/Details.cpp:62
+msgid "VGA 800x600, 256 colors (771)"
+msgstr "वीजीए 800x600, 256 रंग (771)"
+
+#: kde-qt-common/general.cpp:116 kde/Details.cpp:63 qt/Details.cpp:63
+msgid "VGA 800x600, 32767 colors (787)"
+msgstr "वीजीए 800x600, 32767 रंग (787)"
+
+#: kde-qt-common/general.cpp:117 kde/Details.cpp:64 qt/Details.cpp:64
+msgid "VGA 800x600, 65536 colors (788)"
+msgstr "वीजीए 800x600, 65536 रंग (788)"
+
+#: kde-qt-common/general.cpp:118 kde/Details.cpp:65 qt/Details.cpp:65
+msgid "VGA 800x600, 16.7M colors (789)"
+msgstr "वीजीए 800x600, 16.7M रंग (789)"
+
+#: kde-qt-common/general.cpp:119 kde/Details.cpp:66 qt/Details.cpp:66
+msgid "VGA 1024x768, 256 colors (773)"
+msgstr "वीजीए 1024x768, 256 रंग (773)"
+
+#: kde-qt-common/general.cpp:120 kde/Details.cpp:67 qt/Details.cpp:67
+msgid "VGA 1024x768, 32767 colors (790)"
+msgstr "वीजीए 1024x768, 32767 रंग (790)"
+
+#: kde-qt-common/general.cpp:121 kde/Details.cpp:68 qt/Details.cpp:68
+msgid "VGA 1024x768, 65536 colors (791)"
+msgstr "वीजीए 1024x768, 65536 रंग (791)"
+
+#: kde-qt-common/general.cpp:122 kde/Details.cpp:69 qt/Details.cpp:69
+msgid "VGA 1024x768, 16.7M colors (792)"
+msgstr "वीजीए 1024x768, 16.7M रंग (792)"
+
+#: kde-qt-common/general.cpp:123 kde/Details.cpp:70 qt/Details.cpp:70
+msgid "VGA 1280x1024, 256 colors (775)"
+msgstr "वीजीए 1280x1024, 256 रंग (775)"
+
+#: kde-qt-common/general.cpp:124 kde/Details.cpp:71 qt/Details.cpp:71
+msgid "VGA 1280x1024, 32767 colors (793)"
+msgstr "वीजीए 1280x1024, 32767 रंग (793)"
+
+#: kde-qt-common/general.cpp:125 kde/Details.cpp:72 qt/Details.cpp:72
+msgid "VGA 1280x1024, 65536 colors (794)"
+msgstr "वीजीए 1280x1024, 65536 रंग (794)"
+
+#: kde-qt-common/general.cpp:126 kde/Details.cpp:73 qt/Details.cpp:73
+msgid "VGA 1280x1024, 16.7M colors (795)"
+msgstr "वीजीए 1280x1024, 16.7M रंग (795)"
+
+#: kde-qt-common/general.cpp:130
+msgid "Enter LILO &prompt automatically"
+msgstr "लिलो प्राम्प्ट स्वचलित प्रविष्ट करें (&p)"
+
+#: kde-qt-common/general.cpp:131
+msgid ""
+"If this box is checked, LILO goes to the LILO prompt whether or not a key is "
+"pressed. If it is turned off, LILO boots the default operating system unless "
+"shift is pressed (in that case, it goes to the LILO prompt)."
+"<br>This sets the <i>prompt</i> option in lilo.conf."
+msgstr ""
+
+#: kde-qt-common/images.cpp:53
+msgid ""
+"This is the list of kernels and operating systems you can currently boot. "
+"Select which one you want to edit here."
+msgstr ""
+"यह कर्नेल्स तथा ऑपरेटिंग सिस्टम्स की सूची है जिसमें आप वर्तमान में बूट कर सकते "
+"हैं. जिसे आप संपादित करना चाहते हैं उसे चुनें."
+
+#: kde-qt-common/images.cpp:59 kde-qt-common/images.cpp:281
+msgid "&Kernel:"
+msgstr "कर्नेलः (&K)"
+
+#: kde-qt-common/images.cpp:60 kde-qt-common/images.cpp:187
+msgid "Enter the filename of the kernel you want to boot here."
+msgstr "जिस कर्नेल को बूट करना चाहते हैं उसका फ़ाइल नाम यहाँ भरें."
+
+#: kde-qt-common/images.cpp:62 kde-qt-common/images.cpp:188
+#: kde-qt-common/images.cpp:216
+msgid "&Label:"
+msgstr "नाम दें: (&L)"
+
+#: kde-qt-common/images.cpp:63 kde-qt-common/images.cpp:188
+msgid "Enter the label (name) of the kernel you want to boot here."
+msgstr "कर्नेल का नाम यहाँ भरें जिसे आप बूट करना चाहते हैं."
+
+#: kde-qt-common/images.cpp:65 kde-qt-common/images.cpp:189
+msgid "&Root filesystem:"
+msgstr "रूट फ़ाइल सिस्टमः (&R)"
+
+#: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189
+msgid ""
+"Enter the root filesystem (i.e. the partition that will be mounted as / at boot "
+"time) for the kernel you want to boot here."
+msgstr ""
+"जिस कर्नेल को बूट करना चाहते हैं उस के लिए यहाँ उसका रूट फ़ाइल सिस्टम (यानी "
+"पार्टीशन जो बूट समय पर /  के रूप में माउंट होगा)  भरें."
+
+#: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190
+msgid "&Initial ramdisk:"
+msgstr "प्रारंभिक रैमडिस्कः (&I)"
+
+#: kde-qt-common/images.cpp:69 kde-qt-common/images.cpp:190
+msgid ""
+"If you want to use an initial ramdisk (initrd) for this kernel, enter its "
+"filename here. Leave this field blank if you don't intend to use an initial "
+"ramdisk for this kernel."
+msgstr ""
+"यदि आप इस कर्नेल के लिए प्रारंभिक रैमडिस्क (initrd) उपयोग करना चाहते हैं तो "
+"इसका फ़ाइलनाम यहाँ भरें. इस फील्ड को खाली रहने दें यदि आप इस कर्नेल के लिए "
+"प्रारंभिक रैम डिस्क का उपयोग नहीं चाहते हैं."
+
+#: kde-qt-common/images.cpp:71
+msgid "E&xtra parameters:"
+msgstr "अतिरिक्त पैरामीटर्स (&x)"
+
+#: kde-qt-common/images.cpp:72
+msgid ""
+"Enter any extra parameters you wish to pass to the kernel here. Usually, this "
+"can be left blank."
+"<br>This sets the <i>append</i> option in lilo.conf."
+msgstr ""
+
+#: kde-qt-common/images.cpp:79
+msgid "Set &Default"
+msgstr "डिफ़ॉल्ट नियत करें (&D)"
+
+#: kde-qt-common/images.cpp:80
+msgid "Boot this kernel/OS if the user doesn't make a different choice"
+msgstr "इस कर्नेल/ओएस को बूट करें यदि उपयोक्ता भिन्न चुनाव नहीं करता है"
+
+#: kde-qt-common/images.cpp:82
+msgid "De&tails"
+msgstr "विवरण (&t)"
+
+#: kde-qt-common/images.cpp:83
+msgid ""
+"This button brings up a dialog box with further, less commonly used, options."
+msgstr ""
+"अतिरिक्त, सामान्यतः कम उपयोग में आने वाले विकल्पों के संवाद बक्सों को यह बटन "
+"लाता है."
+
+#: kde-qt-common/images.cpp:85
+msgid "&Probe"
+msgstr "जाँच (&P)"
+
+#: kde-qt-common/images.cpp:87
+msgid ""
+"Automatically generate a (hopefully) reasonable lilo.conf for your system"
+msgstr ""
+"आपके तंत्र के लिए एक यथोचित lilo.conf स्वचलित तैयार करता है (उम्मीद तो है)"
+
+#: kde-qt-common/images.cpp:88
+msgid "&Check Configuration"
+msgstr "कॉन्फ़िगरेशन जाँचें (&C)"
+
+#: kde-qt-common/images.cpp:90
+msgid "Run LILO in test mode to see if the configuration is ok"
+msgstr "जाँच मोड में लिलो चलाता है यह देखने के लिए कि कॉन्फ़िगरेशन सही है"
+
+#: kde-qt-common/images.cpp:91
+msgid "Add &Kernel..."
+msgstr "कर्नेल जोड़ें... (&K)"
+
+#: kde-qt-common/images.cpp:93
+msgid "Add a new Linux kernel to the boot menu"
+msgstr "बूट मेन्यू में नया कर्नेल जोड़ें"
+
+#: kde-qt-common/images.cpp:94
+msgid "Add Other &OS..."
+msgstr "अन्य ओएस जोड़ें... (&O)"
+
+#: kde-qt-common/images.cpp:96
+msgid "Add a non-Linux OS to the boot menu"
+msgstr "बूट मेन्यू में नॉन-लिनक्स ओएस जोड़ें"
+
+#: kde-qt-common/images.cpp:97
+msgid "&Remove Entry"
+msgstr "प्रविष्टि हटाएँ (&R)"
+
+#: kde-qt-common/images.cpp:99
+msgid "Remove entry from the boot menu"
+msgstr "बूट मेन्यू में से प्रविष्टि हटाएँ"
+
+#: kde-qt-common/images.cpp:177
+msgid ""
+"Configuration ok. LILO said:\n"
+msgstr ""
+"कॉन्फ़िगरेशन ठीक है. लिलो कहता है:\n"
+
+#: kde-qt-common/images.cpp:178
+msgid "Configuration OK"
+msgstr "कॉन्फ़िगरेशन ठीक"
+
+#: kde-qt-common/images.cpp:180
+msgid ""
+"Configuration NOT ok. LILO said:\n"
+msgstr ""
+"कॉन्फ़िगरेशन ठीक नहीं है. लिलो कहता है:\n"
+
+#: kde-qt-common/images.cpp:181
+msgid "Configuration NOT ok"
+msgstr "कॉन्फ़िगरेशन ठीक नहीं है. "
+
+#: kde-qt-common/images.cpp:187
+msgid "&Kernel filename:"
+msgstr "कर्नेल फ़ाइल नामः (&K)"
+
+#: kde-qt-common/images.cpp:215
+msgid "Boot from dis&k:"
+msgstr "डिस्क से बूट करें: (&k)"
+
+#: kde-qt-common/images.cpp:215
+msgid ""
+"Enter the partition containing the operating system you'd like to boot here."
+msgstr "जिस ऑपरेटिंग सिस्टम से बूट करना चाहते हैं उसका पार्टीशन यहाँ भरें"
+
+#: kde-qt-common/images.cpp:216
+msgid "Enter the label (name) of the operating system here."
+msgstr "ऑपरेटिंग सिस्टम का लेबल (नाम) यहाँ भरें"
+
+#: kde-qt-common/images.cpp:297
+msgid "Dis&k:"
+msgstr "डिस्कः (&k)"
+
+#: kde-qt-common/mainwidget.cpp:43
+msgid "&General Options"
+msgstr "सामान्य विकल्प (&G)"
+
+#: kde-qt-common/mainwidget.cpp:44
+msgid "&Operating Systems"
+msgstr "ऑपरेटिंग सिस्टम्स (&O)"
+
+#: kde-qt-common/mainwidget.cpp:45 kde-qt-common/mainwidget.cpp:65
+#: kde-qt-common/mainwidget.cpp:94 kde-qt-common/mainwidget.cpp:100
+msgid "&Expert"
+msgstr "विशेषज्ञ (&E)"
+
+#: kde-qt-common/mainwidget.cpp:96 kde-qt-common/mainwidget.cpp:104
+msgid "&General options"
+msgstr "सामान्य विकल्प (&G)"
+
+#: kde-qt-common/mainwidget.cpp:98 kde-qt-common/mainwidget.cpp:102
+msgid "&Operating systems"
+msgstr "ऑपरेटिंग सिस्टम्स (&O)"
+
+#: kde/Details.cpp:44 qt/Details.cpp:44
+msgid "&Graphics mode on text console:"
+msgstr "पाठ कंसोल पर ग्राफिक मोडः (&G)"
+
+#: kde/Details.cpp:47 qt/Details.cpp:47
+msgid ""
+"You can select the graphics mode for this kernel here."
+"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
+"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
+"boot time."
+msgstr ""
+
+#: kde/Details.cpp:75 qt/Details.cpp:76
+msgid "Mount root filesystem &read-only"
+msgstr "रूट फ़ाइल सिस्टम सिर्फ पढ़ने योग्य माउन्ट करें (&r)"
+
+#: kde/Details.cpp:76 qt/Details.cpp:77
+msgid ""
+"Mount the root filesystem for this kernel read-only. Since the init scripts "
+"normally take care of remounting the root filesystem in read-write mode after "
+"running some checks, this should always be turned on."
+"<br>Don't turn this off unless you know what you're doing."
+msgstr ""
+
+#: kde/Details.cpp:78 qt/Details.cpp:80
+#, fuzzy
+msgid "Do not check &partition table"
+msgstr "पार्टीशन टेबल नहीं जाँचें (&p)"
+
+#: kde/Details.cpp:79
+msgid ""
+"This turns off some sanity checks while writing the configuration. This should "
+"not be used under \"normal\" circumstances, but it can be useful, for example, "
+"by providing the capability of booting from a floppy disk, without having a "
+"floppy in the drive every time you run lilo."
+"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+msgstr ""
+
+#: kde/Details.cpp:83 qt/Details.cpp:86
+msgid ""
+"Checking this box enables automatic recording of boot command lines as the "
+"default for the following bootups. This way, lilo \"locks\" on a choice until "
+"it is manually overridden."
+"<br>This sets the <b>lock</b> option in lilo.conf"
+msgstr ""
+
+#: kde/Details.cpp:86 qt/Details.cpp:89
+msgid ""
+"If this box is checked, a password (entered below) is required only if any "
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
+"linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"This sets the <b>restricted</b> option in lilo.conf."
+msgstr ""
+
+#: kde/Details.cpp:94 qt/Details.cpp:98
+msgid ""
+"Enter the password required for bootup (if any) here. If <i>restricted</i> "
+"above is checked, the password is required for additional parameters only."
+"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
+"You'll want to make sure nobody untrusted can read this file. Also, you "
+"probably don't want to use your normal/root password here."
+msgstr ""
+
+#: kde/kcontrol.cpp:48
+msgid "kcmlilo"
+msgstr "केसीएम-लिलो"
+
+#: kde/kcontrol.cpp:48
+msgid "LILO Configuration"
+msgstr "लिलो कॉन्फ़िगरेशन"
+
+#: kde/kcontrol.cpp:50
+msgid "(c) 2000, Bernhard Rosenkraenzer"
+msgstr "(c) 2000, बर्नहार्ड रॉसेनक्राएन्जेर"
+
+#: qt/Details.cpp:81
+msgid ""
+"This turns off some sanity checks while writing the configuration. This "
+"shouldn't be used under \"normal\" circumstances, but it's useful, for example, "
+"for installing the possibility to boot from a floppy disk without having a "
+"floppy in the drive every time you run lilo."
+"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+msgstr ""
+
+#: qt/standalone.cpp:41
+#, fuzzy
+msgid "&What's This?"
+msgstr "यह क्या है? (&W)"
+
+#: qt/standalone.cpp:43
+#, fuzzy
+msgid ""
+"The <i>What's This?</i> button is part of this program's help system. Click on "
+"the What's This? button then on any widget in the window to get information "
+"(like this) on it."
+msgstr ""
+" <i>यह क्या है?</i> बटन प्रोग्राम के सहायता तंत्र का भाग है. यह क्या है बटन पर "
+"क्लिक करें फिर विंडो के किसी भी विज़ेट पर क्लिक करें तो आपको उसके बारे में "
+"जानकारी प्राप्त होगी (जैसे कि यह)"
+
+#: qt/standalone.cpp:47
+msgid ""
+"This button calls up the program's online help system. If it does nothing, no "
+"help file has been written (yet); in that case, use the <i>What's This</i> "
+"button on the left."
+msgstr ""
+
+#: qt/standalone.cpp:49
+msgid "&Default"
+msgstr "डिफ़ॉल्ट (&D)"
+
+#: qt/standalone.cpp:50
+msgid ""
+"This button resets all parameters to some (hopefully sane) default values."
+msgstr ""
+"यह बटन सभी पैरामीटर्स को (आशा है कि गंभीरता से) डिफ़ॉल्ट मान पर रीसेट करता है."
+
+#: qt/standalone.cpp:52
+msgid "&Reset"
+msgstr "रीसेट (&R)"
+
+#: qt/standalone.cpp:53
+msgid ""
+"This button resets all parameters to what they were before you started the "
+"program."
+msgstr ""
+"यह बटन सभी पैरामीटर्स को उस पहले की स्थिति में रीसेट करता है जब आपने प्रोग्राम "
+"प्रारंभ किया था."
+
+#: qt/standalone.cpp:56
+msgid "This button saves all your changes without exiting."
+msgstr "यह बटन आपके सभी परिवर्तनों को बाहर हुए बगैर सहेजता है."
+
+#: qt/standalone.cpp:59
+msgid "This button saves all your changes and exits the program."
+msgstr ""
+"यह बटन आपके सभी परिवर्तनों को सहेजता है तथा प्रोग्राम को बाहर कर देता है."
+
+#: qt/standalone.cpp:62
+msgid "This button exits the program without saving your changes."
+msgstr "यह बटन आपके परिवर्तन को सहेजे बगैर प्रोग्राम को बाहर कर देता है."
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr " रविशंकर श्रीवास्तव "
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "raviratlami@yahoo.com , http://www.geocities.com/raviratlami/"