summaryrefslogtreecommitdiffstats
path: root/tde-i18n-zh_TW/messages
diff options
context:
space:
mode:
Diffstat (limited to 'tde-i18n-zh_TW/messages')
-rw-r--r--tde-i18n-zh_TW/messages/tdebase/ksysguard.po2377
1 files changed, 1422 insertions, 955 deletions
diff --git a/tde-i18n-zh_TW/messages/tdebase/ksysguard.po b/tde-i18n-zh_TW/messages/tdebase/ksysguard.po
index 4e71a82dc3d..f5df9c52296 100644
--- a/tde-i18n-zh_TW/messages/tdebase/ksysguard.po
+++ b/tde-i18n-zh_TW/messages/tdebase/ksysguard.po
@@ -8,7 +8,7 @@
msgid ""
msgstr ""
"Project-Id-Version: ksysguard\n"
-"POT-Creation-Date: 2019-01-13 18:47+0100\n"
+"POT-Creation-Date: 2019-10-02 19:02+0200\n"
"PO-Revision-Date: 2006-12-06 10:00+0800\n"
"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
"dot tw>\n"
@@ -32,1204 +32,1671 @@ msgid ""
msgstr ""
"Kenduest@i18n.linux.org.tw,jouston@housediy.com,pesder.liao@msa.hinet.net"
-#: SystemLoad.sgrd:5
-msgid "CPU Load"
-msgstr "CPU 負載"
-
-#: SystemLoad.sgrd:10
-msgid "Load Average (1 min)"
-msgstr "平均負載(1 分鐘)"
-
-#: SystemLoad.sgrd:13
-msgid "Physical Memory"
-msgstr "實體記憶體"
-
-#: SystemLoad.sgrd:21
-msgid "Swap Memory"
-msgstr "交換記憶體"
-
-#: KSysGuardApplet.xml:5
-msgid "CPU"
-msgstr "CPU"
-
-#: KSysGuardApplet.xml:10
-msgid "Mem"
-msgstr "Mem"
-
-#~ msgid "Select Display Type"
-#~ msgstr "選擇顯示類型"
-
-#~ msgid "&Signal Plotter"
-#~ msgstr "信號繪圖器(&S)"
-
-#~ msgid "&Multimeter"
-#~ msgstr "多重儀表(&M)"
-
-#~ msgid "&Dancing Bars"
-#~ msgstr "動態長條(&D)"
-
-#~ msgid ""
-#~ "The KSysGuard applet does not support displaying of this type of sensor. "
-#~ "Please choose another sensor."
-#~ msgstr "KSysGuard 小程式不支援此類型偵測器的顯示。請選擇其他偵測器。"
-
-#~ msgid "Cannot open the file %1."
-#~ msgstr "無法開啟檔案 %1。"
-
-#~ msgid "The file %1 does not contain valid XML."
-#~ msgstr "檔案 %1 沒有包含任何有效的 XML 內容。"
-
-#~ msgid ""
-#~ "The file %1 does not contain a valid applet definition, which must have a "
-#~ "document type 'KSysGuardApplet'."
-#~ msgstr ""
-#~ "檔案 %1 不包含有效的工作表定義,其中必須有“KSysGuardApplet”的文件類型。"
-
-#~ msgid "Cannot save file %1"
-#~ msgstr "無法儲存檔案 %1"
-
-#~ msgid "Drag sensors from the TDE System Guard into this cell."
-#~ msgstr "從 TDE 系統守衛拖曳偵測器到此欄位。"
-
-#~ msgid "Multimeter Settings"
-#~ msgstr "多重儀表設定"
-
-#~ msgid "Name"
-#~ msgstr "名稱"
-
-#~ msgid "PID"
-#~ msgstr "PID"
-
-#~ msgid "PPID"
-#~ msgstr "PPID"
-
-#~ msgid "UID"
-#~ msgstr "UID"
-
-#~ msgid "GID"
-#~ msgstr "GID"
-
-#~ msgid "Status"
-#~ msgstr "狀態"
-
-#~ msgid "User%"
-#~ msgstr "使用者%"
-
-#~ msgid "System%"
-#~ msgstr "系統%"
-
-#~ msgid "Nice"
-#~ msgstr "優先值"
-
-#~ msgid "VmSize"
-#~ msgstr "虛擬記憶體大小"
-
-#~ msgid "VmRss"
-#~ msgstr "虛擬記憶體資源"
-
-#~ msgid "Login"
-#~ msgstr "登入"
-
-#~ msgid "Command"
-#~ msgstr "指令"
-
-#~ msgid "All Processes"
-#~ msgstr "所有程序"
-
-#~ msgid "System Processes"
-#~ msgstr "系統程序"
-
-#~ msgid "User Processes"
-#~ msgstr "使用者程序"
-
-#~ msgid "Own Processes"
-#~ msgstr "擁有的程序"
-
-#~ msgid "&Tree"
-#~ msgstr "樹狀(&T)"
-
-#~ msgid "&Refresh"
-#~ msgstr "更新(&R)"
-
-#~ msgid "&Kill"
-#~ msgstr "終止(&K)"
-
-#~ msgid "%1: Running Processes"
-#~ msgstr "%1:執行中程序"
-
-#~ msgid "You need to select a process first."
-#~ msgstr "您必須先選擇一個程序。"
-
-#~ msgid ""
-#~ "_n: Do you want to kill the selected process?\n"
-#~ "Do you want to kill the %n selected processes?"
-#~ msgstr "您是否要終止 %n 個選擇的程序?"
-
-#~ msgid "Kill Process"
-#~ msgstr "終止程序"
-
-#~ msgid "Kill"
-#~ msgstr "終止"
-
-#~ msgid "Do not ask again"
-#~ msgstr "不再詢問"
-
-#~ msgid "Error while attempting to kill process %1."
-#~ msgstr "當試著終止程序 %1 時發生錯誤。"
-
-#~ msgid "Insufficient permissions to kill process %1."
-#~ msgstr "沒有足夠的權限終止程序 %1 。"
-
-#~ msgid "Process %1 has already disappeared."
-#~ msgstr "程序 %1 已經不見了。"
-
-#~ msgid "Invalid Signal."
-#~ msgstr "無效的信號。"
-
-#~ msgid "Error while attempting to renice process %1."
-#~ msgstr "當試著重設程序 %1 的優先值時發生錯誤。"
-
-#~ msgid "Insufficient permissions to renice process %1."
-#~ msgstr "沒有足夠的權限重設程序 %1 的優先值。"
-
-#~ msgid "Invalid argument."
-#~ msgstr "無效的引數。"
-
-#~ msgid "It is impossible to connect to '%1'."
-#~ msgstr "無法連線到「%1」。"
-
-#~ msgid "Launch &System Guard"
-#~ msgstr "啟動系統守衛(&S)"
-
-#~ msgid "&Properties"
-#~ msgstr "屬性(&P)"
-
-#~ msgid "&Remove Display"
-#~ msgstr "移除顯示(&R)"
-
-#~ msgid "&Setup Update Interval..."
-#~ msgstr "設定更新間隔(&S)..."
-
-#~ msgid "&Continue Update"
-#~ msgstr "持續更新(&C)"
-
-#~ msgid "P&ause Update"
-#~ msgstr "暫停更新(&A)"
-
-#~ msgid ""
-#~ "<qt><p>This is a sensor display. To customize a sensor display click and "
-#~ "hold the right mouse button on either the frame or the display box and "
-#~ "select the <i>Properties</i> entry from the popup menu. Select <i>Remove</"
-#~ "i> to delete the display from the worksheet.</p>%1</qt>"
-#~ msgstr ""
-#~ "<qt><p>這是偵測器顯示。要自訂一個偵測器顯示,在外框或顯示方塊上按下並按住"
-#~ "滑鼠右鍵並選擇跳出選單中的 <i>內容</i> 項目。選擇 <i>移除</i> 可以從工作表"
-#~ "中刪除顯示。</p>%1</qt>"
-
-#~ msgid "Drop Sensor Here"
-#~ msgstr "在這邊放置偵測器"
-
-#~ msgid ""
-#~ "This is an empty space in a worksheet. Drag a sensor from the Sensor "
-#~ "Browser and drop it here. A sensor display will appear that allows you to "
-#~ "monitor the values of the sensor over time."
-#~ msgstr ""
-#~ "這是工作表的空白空間。從偵測器瀏覽器拖曳一個偵測器到這邊。偵測器將會出現並"
-#~ "讓您可以隨時監控這個偵測器的數值。"
-
-#~ msgid "Sensor Logger Settings"
-#~ msgstr "偵測記錄器設定"
-
-#~ msgid "Logging"
-#~ msgstr "紀錄"
-
-#~ msgid "Timer Interval"
-#~ msgstr "計時間隔"
-
-#~ msgid "Sensor Name"
-#~ msgstr "偵測器名稱"
-
-#~ msgid "Host Name"
-#~ msgstr "主機名稱"
-
-#~ msgid "Log File"
-#~ msgstr "紀錄檔"
-
-#~ msgid "Sensor Logger"
-#~ msgstr "偵測記錄器"
-
-#~ msgid "&Remove Sensor"
-#~ msgstr "移除偵測器(&R)"
-
-#~ msgid "&Edit Sensor..."
-#~ msgstr "編輯偵測器(&E)..."
-
-#~ msgid "St&op Logging"
-#~ msgstr "停止紀錄(&O)"
-
-#~ msgid "S&tart Logging"
-#~ msgstr "開始紀錄(&T)"
-
-#~ msgid ""
-#~ "_: process status\n"
-#~ "running"
-#~ msgstr "執行中"
-
-#~ msgid ""
-#~ "_: process status\n"
-#~ "sleeping"
-#~ msgstr "睡眠中"
-
-#~ msgid ""
-#~ "_: process status\n"
-#~ "disk sleep"
-#~ msgstr "磁碟睡眠"
-
-#~ msgid ""
-#~ "_: process status\n"
-#~ "zombie"
-#~ msgstr "殭屍程序"
-
-#~ msgid ""
-#~ "_: process status\n"
-#~ "stopped"
-#~ msgstr "已停止"
-
-#~ msgid ""
-#~ "_: process status\n"
-#~ "paging"
-#~ msgstr "交換中"
-
-#~ msgid ""
-#~ "_: process status\n"
-#~ "idle"
-#~ msgstr "閒置"
-
-#~ msgid "Remove Column"
-#~ msgstr "移除欄位"
-
-#~ msgid "Add Column"
-#~ msgstr "增加欄位"
-
-#~ msgid "Help on Column"
-#~ msgstr "欄位說明"
-
-#~ msgid "Hide Column"
-#~ msgstr "隱藏欄位"
+#: KSGAppletSettings.cc:34
+msgid "System Guard Settings"
+msgstr "系統守衛設定"
-#~ msgid "Show Column"
-#~ msgstr "顯示欄位"
+#: KSGAppletSettings.cc:42
+msgid "Number of displays:"
+msgstr "顯示的數量:"
-#~ msgid "Select All Processes"
-#~ msgstr "選擇所有程序"
+#: KSGAppletSettings.cc:50
+msgid "Size ratio:"
+msgstr "大小比率:"
-#~ msgid "Unselect All Processes"
-#~ msgstr "取消選擇所有程序"
+#: KSGAppletSettings.cc:54
+#, c-format
+msgid "%"
+msgstr "%"
-#~ msgid "Select All Child Processes"
-#~ msgstr "選擇所有子程序"
+#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
+msgid "Update interval:"
+msgstr "更新間隔:"
-#~ msgid "Unselect All Child Processes"
-#~ msgstr "取消選擇所有子程序"
+#: KSGAppletSettings.cc:64 SensorDisplayLib/SensorLoggerDlgWidget.ui:68
+#: WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
+#, no-c-format
+msgid " sec"
+msgstr " 秒"
-#~ msgid "SIGABRT"
-#~ msgstr "SIGABRT"
+#: KSysGuardApplet.cc:209 WorkSheet.cc:331
+msgid "Select Display Type"
+msgstr "選擇顯示類型"
-#~ msgid "SIGALRM"
-#~ msgstr "SIGALRM"
+#: KSysGuardApplet.cc:210 WorkSheet.cc:332
+msgid "&Signal Plotter"
+msgstr "信號繪圖器(&S)"
-#~ msgid "SIGCHLD"
-#~ msgstr "SIGCHLD"
+#: KSysGuardApplet.cc:211 WorkSheet.cc:333
+msgid "&Multimeter"
+msgstr "多重儀表(&M)"
-#~ msgid "SIGCONT"
-#~ msgstr "SIGCONT"
+#: KSysGuardApplet.cc:212
+msgid "&Dancing Bars"
+msgstr "動態長條(&D)"
-#~ msgid "SIGFPE"
-#~ msgstr "SIGFPE"
-
-#~ msgid "SIGHUP"
-#~ msgstr "SIGHUP"
-
-#~ msgid "SIGILL"
-#~ msgstr "SIGILL"
-
-#~ msgid "SIGINT"
-#~ msgstr "SIGINT"
-
-#~ msgid "SIGKILL"
-#~ msgstr "SIGKILL"
-
-#~ msgid "SIGPIPE"
-#~ msgstr "SIGPIPE"
-
-#~ msgid "SIGQUIT"
-#~ msgstr "SIGQUIT"
-
-#~ msgid "SIGSEGV"
-#~ msgstr "SIGSEGV"
-
-#~ msgid "SIGSTOP"
-#~ msgstr "SIGSTOP"
-
-#~ msgid "SIGTERM"
-#~ msgstr "SIGTERM"
-
-#~ msgid "SIGTSTP"
-#~ msgstr "SIGTSTP"
-
-#~ msgid "SIGTTIN"
-#~ msgstr "SIGTTIN"
-
-#~ msgid "SIGTTOU"
-#~ msgstr "SIGTTOU"
-
-#~ msgid "SIGUSR1"
-#~ msgstr "SIGUSR1"
-
-#~ msgid "SIGUSR2"
-#~ msgstr "SIGUSR2"
-
-#~ msgid "Send Signal"
-#~ msgstr "送出信號"
-
-#~ msgid "Renice Process..."
-#~ msgstr "調整程序優先值..."
-
-#~ msgid ""
-#~ "_n: Do you really want to send signal %1 to the selected process?\n"
-#~ "Do you really want to send signal %1 to the %n selected processes?"
-#~ msgstr "您確定要送出信號 %1 給選擇的 %n 個程序?"
-
-#~ msgid "Send"
-#~ msgstr "傳送"
-
-#~ msgid "Renice Process"
-#~ msgstr "調整程序優先值"
-
-#~ msgid ""
-#~ "You are about to change the scheduling priority of\n"
-#~ "process %1. Be aware that only the Superuser (root)\n"
-#~ "can decrease the nice level of a process. The lower\n"
-#~ "the number is the higher the priority.\n"
-#~ "\n"
-#~ "Please enter the desired nice level:"
-#~ msgstr ""
-#~ "您即將變更程序 %1 的排程優先\n"
-#~ "順序。請注意,只有超級使用者 (root)\n"
-#~ "可以調低處理的排列層次。數字愈小\n"
-#~ "則優先順序愈高。\n"
-#~ "\n"
-#~ "請輸入想要的排列層次:"
-
-#~ msgid "Foreground color:"
-#~ msgstr "前景顏色:"
-
-#~ msgid "Background color:"
-#~ msgstr "背景顏色:"
-
-#~ msgid "Edit BarGraph Preferences"
-#~ msgstr "編輯長條圖偏好設定"
-
-#~ msgid "Range"
-#~ msgstr "範圍"
-
-#~ msgid "Title"
-#~ msgstr "標題"
-
-#~ msgid "Enter the title of the display here."
-#~ msgstr "在這邊輸入顯示的標題。"
-
-#~ msgid "Display Range"
-#~ msgstr "顯示範圍"
-
-#~ msgid "Minimum value:"
-#~ msgstr "最小值:"
-
-#~ msgid ""
-#~ "Enter the minimum value for the display here. If both values are 0, "
-#~ "automatic range detection is enabled."
-#~ msgstr "在這邊輸入顯示的最小值。如果二個數值都是 0 ,將會啟用自動偵測範圍。"
-
-#~ msgid "Maximum value:"
-#~ msgstr "最大值:"
+#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
+msgid ""
+"The KSysGuard applet does not support displaying of this type of sensor. "
+"Please choose another sensor."
+msgstr "KSysGuard 小程式不支援此類型偵測器的顯示。請選擇其他偵測器。"
-#~ msgid ""
-#~ "Enter the maximum value for the display here. If both values are 0, "
-#~ "automatic range detection is enabled."
-#~ msgstr "在這邊輸入顯示的最大值。如果二個數值都是 0 ,將會啟用自動偵測範圍。"
+#: KSysGuardApplet.cc:318 WorkSheet.cc:94
+#, c-format
+msgid "Cannot open the file %1."
+msgstr "無法開啟檔案 %1。"
-#~ msgid "Alarms"
-#~ msgstr "警報"
+#: KSysGuardApplet.cc:327 WorkSheet.cc:102
+msgid "The file %1 does not contain valid XML."
+msgstr "檔案 %1 沒有包含任何有效的 XML 內容。"
-#~ msgid "Alarm for Minimum Value"
-#~ msgstr "最小值的警報"
+#: KSysGuardApplet.cc:334
+msgid ""
+"The file %1 does not contain a valid applet definition, which must have a "
+"document type 'KSysGuardApplet'."
+msgstr ""
+"檔案 %1 不包含有效的工作表定義,其中必須有“KSysGuardApplet”的文件類型。"
-#~ msgid "Enable alarm"
-#~ msgstr "啟用鬧鈴"
+#: KSysGuardApplet.cc:476 WorkSheet.cc:225
+#, c-format
+msgid "Cannot save file %1"
+msgstr "無法儲存檔案 %1"
-#~ msgid "Enable the minimum value alarm."
-#~ msgstr "啟用最小值警報。"
+#: KSysGuardApplet.cc:488
+msgid "Drag sensors from the TDE System Guard into this cell."
+msgstr "從 TDE 系統守衛拖曳偵測器到此欄位。"
-#~ msgid "Lower limit:"
-#~ msgstr "下限:"
+#: SensorBrowser.cc:77
+msgid "Sensor Browser"
+msgstr "偵測器瀏覽程式"
-#~ msgid "Alarm for Maximum Value"
-#~ msgstr "最大值的警報"
+#: SensorBrowser.cc:78
+msgid "Sensor Type"
+msgstr "偵測器類型"
-#~ msgid "Enable the maximum value alarm."
-#~ msgstr "啟用最大值警報。"
+#: SensorBrowser.cc:81
+msgid "Drag sensors to empty cells of a worksheet or the panel applet."
+msgstr "將偵測器拖曳到工作表或是面板小程式中的空白欄位。"
-#~ msgid "Upper limit:"
-#~ msgstr "上限:"
+#: SensorBrowser.cc:88
+msgid ""
+"The sensor browser lists the connected hosts and the sensors that they "
+"provide. Click and drag sensors into drop zones of a worksheet or the panel "
+"applet. A display will appear that visualizes the values provided by the "
+"sensor. Some sensor displays can display values of multiple sensors. Simply "
+"drag other sensors on to the display to add more sensors."
+msgstr ""
+"偵測器瀏覽器列出目前連線的主機與他們所提供的偵測器。拖曳偵測器到工作表或面板"
+"小程式。顯示器將出現偵測器並提供視覺化顯示的數值。有些偵測器顯示可以顯示多個"
+"偵測器的數值。只要拖曳其他的偵測器到顯示器上便可以增加偵測器。"
+
+#: SensorBrowser.cc:148
+msgid "Drag sensors to empty fields in a worksheet."
+msgstr "將偵測器拖曳到工作表中的空白欄位。"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:43
+msgid "Edit BarGraph Preferences"
+msgstr "編輯長條圖偏好設定"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:47
+msgid "Range"
+msgstr "範圍"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:50
+#: SensorDisplayLib/ListViewSettingsWidget.ui:24
+#: SensorDisplayLib/LogFileSettings.ui:46
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:25
+#: SensorDisplayLib/SensorLoggerSettingsWidget.ui:27 WorkSheetSettings.cc:48
+#, no-c-format
+msgid "Title"
+msgstr "標題"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:54
+#: SensorDisplayLib/FancyPlotterSettings.cc:64
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:36
+#, no-c-format
+msgid "Enter the title of the display here."
+msgstr "在這邊輸入顯示的標題。"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:59
+msgid "Display Range"
+msgstr "顯示範圍"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:63
+#: SensorDisplayLib/FancyPlotterSettings.cc:89
+msgid "Minimum value:"
+msgstr "最小值:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:67
+#: SensorDisplayLib/FancyPlotterSettings.cc:95
+msgid ""
+"Enter the minimum value for the display here. If both values are 0, "
+"automatic range detection is enabled."
+msgstr "在這邊輸入顯示的最小值。如果二個數值都是 0 ,將會啟用自動偵測範圍。"
-#~ msgid "Look"
-#~ msgstr "監看"
+#: SensorDisplayLib/DancingBarsSettings.cc:71
+#: SensorDisplayLib/FancyPlotterSettings.cc:99
+msgid "Maximum value:"
+msgstr "最大值:"
-#~ msgid "Normal bar color:"
-#~ msgstr "正常長條顏色:"
+#: SensorDisplayLib/DancingBarsSettings.cc:75
+#: SensorDisplayLib/FancyPlotterSettings.cc:105
+msgid ""
+"Enter the maximum value for the display here. If both values are 0, "
+"automatic range detection is enabled."
+msgstr "在這邊輸入顯示的最大值。如果二個數值都是 0 ,將會啟用自動偵測範圍。"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:84
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:61
+#, no-c-format
+msgid "Alarms"
+msgstr "警報"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:87
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:138
+#: SensorDisplayLib/SensorLoggerDlgWidget.ui:78
+#, no-c-format
+msgid "Alarm for Minimum Value"
+msgstr "最小值的警報"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:91
+#: SensorDisplayLib/DancingBarsSettings.cc:109
+msgid "Enable alarm"
+msgstr "啟用鬧鈴"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:92
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:152
+#: SensorDisplayLib/SensorLoggerDlgWidget.ui:92
+#, no-c-format
+msgid "Enable the minimum value alarm."
+msgstr "啟用最小值警報。"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:95
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:180
+#: SensorDisplayLib/SensorLoggerDlgWidget.ui:120
+#, no-c-format
+msgid "Lower limit:"
+msgstr "下限:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:105
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:72
+#: SensorDisplayLib/SensorLoggerDlgWidget.ui:144
+#, no-c-format
+msgid "Alarm for Maximum Value"
+msgstr "最大值的警報"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:110
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:86
+#: SensorDisplayLib/SensorLoggerDlgWidget.ui:158
+#, no-c-format
+msgid "Enable the maximum value alarm."
+msgstr "啟用最大值警報。"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:113
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:114
+#: SensorDisplayLib/SensorLoggerDlgWidget.ui:186
+#, no-c-format
+msgid "Upper limit:"
+msgstr "上限:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:126
+msgid "Look"
+msgstr "監看"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:129
+msgid "Normal bar color:"
+msgstr "正常長條顏色:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:136
+msgid "Out-of-range color:"
+msgstr "超過範圍的顏色:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:143
+#: SensorDisplayLib/ListViewSettingsWidget.ui:98 SensorDisplayLib/LogFile.cc:90
+#: SensorDisplayLib/LogFileSettings.ui:102
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:241
+#: SensorDisplayLib/SensorLoggerSettingsWidget.ui:99 ksgrd/StyleSettings.cc:68
+#, no-c-format
+msgid "Background color:"
+msgstr "背景顏色:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:150
+#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
+msgid "Font size:"
+msgstr "字型大小:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:154
+msgid ""
+"This determines the size of the font used to print a label underneath the "
+"bars. Bars are automatically suppressed if text becomes too large, so it is "
+"advisable to use a small font size here."
+msgstr ""
+"這個會偵測顯示在長條圖下面的字型大小。如果字型太大的話長條圖將會自動隱藏,所"
+"以我們建議你使用較小的字型大小。"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:161
+#: SensorDisplayLib/FancyPlotterSettings.cc:224
+msgid "Sensors"
+msgstr "偵測器"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:166
+#: SensorDisplayLib/FancyPlotterSettings.cc:231
+msgid "Host"
+msgstr "主機"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:167
+#: SensorDisplayLib/FancyPlotterSettings.cc:232
+msgid "Sensor"
+msgstr "偵測器"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:168
+msgid "Label"
+msgstr "標籤"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:169
+#: SensorDisplayLib/FancyPlotterSettings.cc:233
+msgid "Unit"
+msgstr "單位"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:170
+#: SensorDisplayLib/FancyPlotterSettings.cc:234
+#: SensorDisplayLib/ProcessController.cc:59
+msgid "Status"
+msgstr "狀態"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:174
+msgid "Edit..."
+msgstr "編輯..."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:176
+msgid "Push this button to configure the label."
+msgstr "按下這個按鈕以設定標籤。"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:181
+#: SensorDisplayLib/FancyPlotterSettings.cc:249
+msgid "Push this button to delete the sensor."
+msgstr "按下這個按鈕以刪除偵測器。"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:356
+msgid "Label of Bar Graph"
+msgstr "長條圖的標籤"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:357
+msgid "Enter new label:"
+msgstr "輸入新標籤:"
+
+#: SensorDisplayLib/DummyDisplay.cc:33
+msgid "Drop Sensor Here"
+msgstr "在這邊放置偵測器"
+
+#: SensorDisplayLib/DummyDisplay.cc:38
+msgid ""
+"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
+"and drop it here. A sensor display will appear that allows you to monitor "
+"the values of the sensor over time."
+msgstr ""
+"這是工作表的空白空間。從偵測器瀏覽器拖曳一個偵測器到這邊。偵測器將會出現並讓"
+"您可以隨時監控這個偵測器的數值。"
-#~ msgid "Out-of-range color:"
-#~ msgstr "超過範圍的顏色:"
+#: SensorDisplayLib/FancyPlotterSettings.cc:47
+msgid "Signal Plotter Settings"
+msgstr "信號繪圖器設定"
-#~ msgid "Font size:"
-#~ msgstr "字型大小:"
+#: SensorDisplayLib/FancyPlotterSettings.cc:57
+msgid "Style"
+msgstr "風格"
-#~ msgid ""
-#~ "This determines the size of the font used to print a label underneath the "
-#~ "bars. Bars are automatically suppressed if text becomes too large, so it "
-#~ "is advisable to use a small font size here."
-#~ msgstr ""
-#~ "這個會偵測顯示在長條圖下面的字型大小。如果字型太大的話長條圖將會自動隱藏,"
-#~ "所以我們建議你使用較小的字型大小。"
+#: SensorDisplayLib/FancyPlotterSettings.cc:60
+msgid "Title:"
+msgstr "標題:"
-#~ msgid "Sensors"
-#~ msgstr "偵測器"
+#: SensorDisplayLib/FancyPlotterSettings.cc:69
+msgid "Graph Drawing Style"
+msgstr "圖形繪製風格"
-#~ msgid "Host"
-#~ msgstr "主機"
+#: SensorDisplayLib/FancyPlotterSettings.cc:71
+msgid "Basic polygons"
+msgstr "基本多邊形"
-#~ msgid "Sensor"
-#~ msgstr "偵測器"
+#: SensorDisplayLib/FancyPlotterSettings.cc:73
+msgid "Original - single line per data point"
+msgstr "原始 - 每個資料點一條直線"
-#~ msgid "Label"
-#~ msgstr "標籤"
+#: SensorDisplayLib/FancyPlotterSettings.cc:78
+msgid "Scales"
+msgstr "比例"
-#~ msgid "Unit"
-#~ msgstr "單位"
+#: SensorDisplayLib/FancyPlotterSettings.cc:81
+msgid "Vertical Scale"
+msgstr "垂直比例"
-#~ msgid "Edit..."
-#~ msgstr "編輯..."
+#: SensorDisplayLib/FancyPlotterSettings.cc:85
+msgid "Automatic range detection"
+msgstr "自動偵測範圍"
-#~ msgid "Push this button to configure the label."
-#~ msgstr "按下這個按鈕以設定標籤。"
+#: SensorDisplayLib/FancyPlotterSettings.cc:86
+msgid ""
+"Check this box if you want the display range to adapt dynamically to the "
+"currently displayed values; if you do not check this, you have to specify "
+"the range you want in the fields below."
+msgstr ""
+"如果你想要顯示的範圍自動對應目前能夠顯示的數值,請核取此方塊;如果你沒有核"
+"取,那麼你必須在下面的欄位中指定您想要的範圍。"
-#~ msgid "Push this button to delete the sensor."
-#~ msgstr "按下這個按鈕以刪除偵測器。"
+#: SensorDisplayLib/FancyPlotterSettings.cc:111
+msgid "Horizontal Scale"
+msgstr "水平比例"
-#~ msgid "Label of Bar Graph"
-#~ msgstr "長條圖的標籤"
+#: SensorDisplayLib/FancyPlotterSettings.cc:120
+msgid "pixel(s) per time period"
+msgstr "每個時間間隔的像素"
-#~ msgid "Enter new label:"
-#~ msgstr "輸入新標籤:"
+#: SensorDisplayLib/FancyPlotterSettings.cc:126
+msgid "Grid"
+msgstr "格子"
-#~ msgid "Signal Plotter Settings"
-#~ msgstr "信號繪圖器設定"
+#: SensorDisplayLib/FancyPlotterSettings.cc:129
+msgid "Lines"
+msgstr "線"
-#~ msgid "Style"
-#~ msgstr "風格"
+#: SensorDisplayLib/FancyPlotterSettings.cc:133
+msgid "Vertical lines"
+msgstr "垂直線"
-#~ msgid "Title:"
-#~ msgstr "標題:"
+#: SensorDisplayLib/FancyPlotterSettings.cc:134
+msgid "Check this to activate the vertical lines if display is large enough."
+msgstr "如果顯示夠大,你可以核取這個啟動垂直線。"
-#~ msgid "Graph Drawing Style"
-#~ msgstr "圖形繪製風格"
+#: SensorDisplayLib/FancyPlotterSettings.cc:137
+msgid "Distance:"
+msgstr "距離:"
-#~ msgid "Basic polygons"
-#~ msgstr "基本多邊形"
+#: SensorDisplayLib/FancyPlotterSettings.cc:143
+msgid "Enter the distance between two vertical lines here."
+msgstr "在這裡輸入兩個垂直線之間的距離。"
-#~ msgid "Original - single line per data point"
-#~ msgstr "原始 - 每個資料點一條直線"
+#: SensorDisplayLib/FancyPlotterSettings.cc:147
+msgid "Vertical lines scroll"
+msgstr "垂直捲動軸"
-#~ msgid "Scales"
-#~ msgstr "比例"
+#: SensorDisplayLib/FancyPlotterSettings.cc:150
+msgid "Horizontal lines"
+msgstr "水平線"
-#~ msgid "Vertical Scale"
-#~ msgstr "垂直比例"
+#: SensorDisplayLib/FancyPlotterSettings.cc:151
+msgid "Check this to enable horizontal lines if display is large enough."
+msgstr "如果顯示夠大,你可以核取這個以顯示水平線。"
-#~ msgid "Automatic range detection"
-#~ msgstr "自動偵測範圍"
+#: SensorDisplayLib/FancyPlotterSettings.cc:154
+msgid "Count:"
+msgstr "計數:"
-#~ msgid ""
-#~ "Check this box if you want the display range to adapt dynamically to the "
-#~ "currently displayed values; if you do not check this, you have to specify "
-#~ "the range you want in the fields below."
-#~ msgstr ""
-#~ "如果你想要顯示的範圍自動對應目前能夠顯示的數值,請核取此方塊;如果你沒有核"
-#~ "取,那麼你必須在下面的欄位中指定您想要的範圍。"
+#: SensorDisplayLib/FancyPlotterSettings.cc:160
+msgid "Enter the number of horizontal lines here."
+msgstr "輸入水平線的數量。"
-#~ msgid "Horizontal Scale"
-#~ msgstr "水平比例"
+#: SensorDisplayLib/FancyPlotterSettings.cc:168
+#: SensorDisplayLib/LogFileSettings.ui:35
+#, no-c-format
+msgid "Text"
+msgstr "文字"
-#~ msgid "pixel(s) per time period"
-#~ msgstr "每個時間間隔的像素"
+#: SensorDisplayLib/FancyPlotterSettings.cc:172
+msgid "Labels"
+msgstr "標籤"
-#~ msgid "Grid"
-#~ msgstr "格子"
+#: SensorDisplayLib/FancyPlotterSettings.cc:173
+msgid ""
+"Check this box if horizontal lines should be decorated with the values they "
+"mark."
+msgstr "如果水平線應該依照其標記的數值來佈置,請核取此方塊。"
-#~ msgid "Lines"
-#~ msgstr "線"
+#: SensorDisplayLib/FancyPlotterSettings.cc:185
+msgid "Top bar"
+msgstr "標題列"
-#~ msgid "Vertical lines"
-#~ msgstr "垂直線"
+#: SensorDisplayLib/FancyPlotterSettings.cc:186
+msgid ""
+"Check this to active the display title bar. This is probably only useful for "
+"applet displays. The bar is only visible if the display is large enough."
+msgstr ""
+"選取這個以啟動標題列。這大概只有在顯示小程式的時候有用。這個長條只在顯示夠大"
+"的時候看的到。"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:193
+#: SensorDisplayLib/ListViewSettingsWidget.ui:56
+#: SensorDisplayLib/LogFileSettings.ui:64
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:206
+#: SensorDisplayLib/SensorLoggerSettingsWidget.ui:62
+#, no-c-format
+msgid "Colors"
+msgstr "顏色"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:196
+msgid "Vertical lines:"
+msgstr "垂直線:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:203
+msgid "Horizontal lines:"
+msgstr "水平線:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:210
+msgid "Background:"
+msgstr "背景:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:242
+msgid "Set Color..."
+msgstr "設定色彩..."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:244
+msgid "Push this button to configure the color of the sensor in the diagram."
+msgstr "按下這個按鈕以設定圖表中偵測器的顏色。"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:252
+msgid "Move Up"
+msgstr "上移"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:256
+msgid "Move Down"
+msgstr "下移"
+
+#: SensorDisplayLib/ListViewSettings.cc:26
+msgid "List View Settings"
+msgstr "列出檢視設定值"
+
+#: SensorDisplayLib/LogFile.cc:88 SensorDisplayLib/LogFileSettings.ui:94
+#, no-c-format
+msgid "Foreground color:"
+msgstr "前景顏色:"
+
+#: SensorDisplayLib/MultiMeterSettings.cc:26
+msgid "Multimeter Settings"
+msgstr "多重儀表設定"
+
+#: SensorDisplayLib/ProcessController.cc:54
+msgid "Name"
+msgstr "名稱"
+
+#: SensorDisplayLib/ProcessController.cc:55
+msgid "PID"
+msgstr "PID"
+
+#: SensorDisplayLib/ProcessController.cc:56
+msgid "PPID"
+msgstr "PPID"
+
+#: SensorDisplayLib/ProcessController.cc:57
+msgid "UID"
+msgstr "UID"
+
+#: SensorDisplayLib/ProcessController.cc:58
+msgid "GID"
+msgstr "GID"
+
+#: SensorDisplayLib/ProcessController.cc:60
+#, c-format
+msgid "User%"
+msgstr "使用者%"
+
+#: SensorDisplayLib/ProcessController.cc:61
+#, c-format
+msgid "System%"
+msgstr "系統%"
+
+#: SensorDisplayLib/ProcessController.cc:62 SensorDisplayLib/ProcessList.cc:783
+msgid "Nice"
+msgstr "優先值"
+
+#: SensorDisplayLib/ProcessController.cc:63
+msgid "VmSize"
+msgstr "虛擬記憶體大小"
+
+#: SensorDisplayLib/ProcessController.cc:64
+msgid "VmRss"
+msgstr "虛擬記憶體資源"
+
+#: SensorDisplayLib/ProcessController.cc:65
+msgid "Login"
+msgstr "登入"
+
+#: SensorDisplayLib/ProcessController.cc:66
+msgid "Command"
+msgstr "指令"
+
+#: SensorDisplayLib/ProcessController.cc:97
+msgid "All Processes"
+msgstr "所有程序"
+
+#: SensorDisplayLib/ProcessController.cc:98
+msgid "System Processes"
+msgstr "系統程序"
-#~ msgid ""
-#~ "Check this to activate the vertical lines if display is large enough."
-#~ msgstr "如果顯示夠大,你可以核取這個啟動垂直線。"
+#: SensorDisplayLib/ProcessController.cc:99
+msgid "User Processes"
+msgstr "使用者程序"
-#~ msgid "Distance:"
-#~ msgstr "距離:"
+#: SensorDisplayLib/ProcessController.cc:100
+msgid "Own Processes"
+msgstr "擁有的程序"
-#~ msgid "Enter the distance between two vertical lines here."
-#~ msgstr "在這裡輸入兩個垂直線之間的距離。"
+#: SensorDisplayLib/ProcessController.cc:103
+msgid "&Tree"
+msgstr "樹狀(&T)"
-#~ msgid "Vertical lines scroll"
-#~ msgstr "垂直捲動軸"
+#: SensorDisplayLib/ProcessController.cc:116
+msgid "&Refresh"
+msgstr "更新(&R)"
-#~ msgid "Horizontal lines"
-#~ msgstr "水平線"
+#: SensorDisplayLib/ProcessController.cc:123
+msgid "&Kill"
+msgstr "終止(&K)"
-#~ msgid "Check this to enable horizontal lines if display is large enough."
-#~ msgstr "如果顯示夠大,你可以核取這個以顯示水平線。"
+#: SensorDisplayLib/ProcessController.cc:206
+msgid "%1: Running Processes"
+msgstr "%1:執行中程序"
-#~ msgid "Count:"
-#~ msgstr "計數:"
+#: SensorDisplayLib/ProcessController.cc:239
+msgid "You need to select a process first."
+msgstr "您必須先選擇一個程序。"
-#~ msgid "Enter the number of horizontal lines here."
-#~ msgstr "輸入水平線的數量。"
+#: SensorDisplayLib/ProcessController.cc:245
+#, c-format
+msgid ""
+"_n: Do you want to kill the selected process?\n"
+"Do you want to kill the %n selected processes?"
+msgstr "您是否要終止 %n 個選擇的程序?"
+
+#: SensorDisplayLib/ProcessController.cc:248
+msgid "Kill Process"
+msgstr "終止程序"
+
+#: SensorDisplayLib/ProcessController.cc:252
+msgid "Kill"
+msgstr "終止"
+
+#: SensorDisplayLib/ProcessController.cc:258
+msgid "Do not ask again"
+msgstr "不再詢問"
+
+#: SensorDisplayLib/ProcessController.cc:344
+#, c-format
+msgid "Error while attempting to kill process %1."
+msgstr "當試著終止程序 %1 時發生錯誤。"
+
+#: SensorDisplayLib/ProcessController.cc:349
+#, c-format
+msgid "Insufficient permissions to kill process %1."
+msgstr "沒有足夠的權限終止程序 %1 。"
+
+#: SensorDisplayLib/ProcessController.cc:354
+#: SensorDisplayLib/ProcessController.cc:389
+msgid "Process %1 has already disappeared."
+msgstr "程序 %1 已經不見了。"
+
+#: SensorDisplayLib/ProcessController.cc:358
+msgid "Invalid Signal."
+msgstr "無效的信號。"
+
+#: SensorDisplayLib/ProcessController.cc:379
+#, c-format
+msgid "Error while attempting to renice process %1."
+msgstr "當試著重設程序 %1 的優先值時發生錯誤。"
+
+#: SensorDisplayLib/ProcessController.cc:384
+#, c-format
+msgid "Insufficient permissions to renice process %1."
+msgstr "沒有足夠的權限重設程序 %1 的優先值。"
+
+#: SensorDisplayLib/ProcessController.cc:393
+msgid "Invalid argument."
+msgstr "無效的引數。"
+
+#: SensorDisplayLib/ProcessList.cc:110
+msgid ""
+"_: process status\n"
+"running"
+msgstr "執行中"
-#~ msgid "Text"
-#~ msgstr "文字"
+#: SensorDisplayLib/ProcessList.cc:112
+msgid ""
+"_: process status\n"
+"sleeping"
+msgstr "睡眠中"
-#~ msgid "Labels"
-#~ msgstr "標籤"
+#: SensorDisplayLib/ProcessList.cc:114
+msgid ""
+"_: process status\n"
+"disk sleep"
+msgstr "磁碟睡眠"
-#~ msgid ""
-#~ "Check this box if horizontal lines should be decorated with the values "
-#~ "they mark."
-#~ msgstr "如果水平線應該依照其標記的數值來佈置,請核取此方塊。"
+#: SensorDisplayLib/ProcessList.cc:115
+msgid ""
+"_: process status\n"
+"zombie"
+msgstr "殭屍程序"
-#~ msgid "Top bar"
-#~ msgstr "標題列"
+#: SensorDisplayLib/ProcessList.cc:117
+msgid ""
+"_: process status\n"
+"stopped"
+msgstr "已停止"
-#~ msgid ""
-#~ "Check this to active the display title bar. This is probably only useful "
-#~ "for applet displays. The bar is only visible if the display is large "
-#~ "enough."
-#~ msgstr ""
-#~ "選取這個以啟動標題列。這大概只有在顯示小程式的時候有用。這個長條只在顯示夠"
-#~ "大的時候看的到。"
+#: SensorDisplayLib/ProcessList.cc:118
+msgid ""
+"_: process status\n"
+"paging"
+msgstr "交換中"
-#~ msgid "Colors"
-#~ msgstr "顏色"
+#: SensorDisplayLib/ProcessList.cc:119
+msgid ""
+"_: process status\n"
+"idle"
+msgstr "閒置"
-#~ msgid "Vertical lines:"
-#~ msgstr "垂直線:"
+#: SensorDisplayLib/ProcessList.cc:259
+msgid "Remove Column"
+msgstr "移除欄位"
-#~ msgid "Horizontal lines:"
-#~ msgstr "水平線:"
+#: SensorDisplayLib/ProcessList.cc:260
+msgid "Add Column"
+msgstr "增加欄位"
-#~ msgid "Background:"
-#~ msgstr "背景:"
+#: SensorDisplayLib/ProcessList.cc:261
+msgid "Help on Column"
+msgstr "欄位說明"
-#~ msgid "Set Color..."
-#~ msgstr "設定色彩..."
+#: SensorDisplayLib/ProcessList.cc:788
+msgid "Hide Column"
+msgstr "隱藏欄位"
-#~ msgid ""
-#~ "Push this button to configure the color of the sensor in the diagram."
-#~ msgstr "按下這個按鈕以設定圖表中偵測器的顏色。"
+#: SensorDisplayLib/ProcessList.cc:794
+msgid "Show Column"
+msgstr "顯示欄位"
-#~ msgid "Move Up"
-#~ msgstr "上移"
+#: SensorDisplayLib/ProcessList.cc:798
+msgid "Select All Processes"
+msgstr "選擇所有程序"
-#~ msgid "Move Down"
-#~ msgstr "下移"
+#: SensorDisplayLib/ProcessList.cc:799
+msgid "Unselect All Processes"
+msgstr "取消選擇所有程序"
-#~ msgid "List View Settings"
-#~ msgstr "列出檢視設定值"
+#: SensorDisplayLib/ProcessList.cc:805
+msgid "Select All Child Processes"
+msgstr "選擇所有子程序"
-#~ msgid "System Guard Settings"
-#~ msgstr "系統守衛設定"
+#: SensorDisplayLib/ProcessList.cc:806
+msgid "Unselect All Child Processes"
+msgstr "取消選擇所有子程序"
-#~ msgid "Number of displays:"
-#~ msgstr "顯示的數量:"
+#: SensorDisplayLib/ProcessList.cc:808
+msgid "SIGABRT"
+msgstr "SIGABRT"
-#~ msgid "Size ratio:"
-#~ msgstr "大小比率:"
+#: SensorDisplayLib/ProcessList.cc:809
+msgid "SIGALRM"
+msgstr "SIGALRM"
-#~ msgid "%"
-#~ msgstr "%"
+#: SensorDisplayLib/ProcessList.cc:810
+msgid "SIGCHLD"
+msgstr "SIGCHLD"
-#~ msgid "Update interval:"
-#~ msgstr "更新間隔:"
+#: SensorDisplayLib/ProcessList.cc:811
+msgid "SIGCONT"
+msgstr "SIGCONT"
-#~ msgid " sec"
-#~ msgstr " 秒"
+#: SensorDisplayLib/ProcessList.cc:812
+msgid "SIGFPE"
+msgstr "SIGFPE"
-#~ msgid ""
-#~ "The file %1 does not contain a valid worksheet definition, which must "
-#~ "have a document type 'KSysGuardWorkSheet'."
-#~ msgstr ""
-#~ "檔案 %1 不包含有效的工作表定義,其中必須有“KsysGuardWorkSheet”的文件類型。"
+#: SensorDisplayLib/ProcessList.cc:813
+msgid "SIGHUP"
+msgstr "SIGHUP"
-#~ msgid "The file %1 has an invalid worksheet size."
-#~ msgstr "檔案 %1 含有不合法的工作表大小。"
+#: SensorDisplayLib/ProcessList.cc:814
+msgid "SIGILL"
+msgstr "SIGILL"
-#~ msgid "The clipboard does not contain a valid display description."
-#~ msgstr "剪貼簿並沒有包含合法的顯示敘述。"
+#: SensorDisplayLib/ProcessList.cc:815
+msgid "SIGINT"
+msgstr "SIGINT"
-#~ msgid "&BarGraph"
-#~ msgstr "長條圖(&B)"
+#: SensorDisplayLib/ProcessList.cc:816
+msgid "SIGKILL"
+msgstr "SIGKILL"
-#~ msgid "S&ensorLogger"
-#~ msgstr "偵測記錄器(&E)"
+#: SensorDisplayLib/ProcessList.cc:817
+msgid "SIGPIPE"
+msgstr "SIGPIPE"
-#~ msgid "Log File Settings"
-#~ msgstr "紀錄檔案設定"
+#: SensorDisplayLib/ProcessList.cc:818
+msgid "SIGQUIT"
+msgstr "SIGQUIT"
-#~ msgid "Select Font..."
-#~ msgstr "選擇字型..."
+#: SensorDisplayLib/ProcessList.cc:819
+msgid "SIGSEGV"
+msgstr "SIGSEGV"
-#~ msgid "Filter"
-#~ msgstr "過濾器"
+#: SensorDisplayLib/ProcessList.cc:820
+msgid "SIGSTOP"
+msgstr "SIGSTOP"
-#~ msgid "&Add"
-#~ msgstr "新增(&A)"
+#: SensorDisplayLib/ProcessList.cc:821
+msgid "SIGTERM"
+msgstr "SIGTERM"
-#~ msgid "&Change"
-#~ msgstr "改變(&C)"
+#: SensorDisplayLib/ProcessList.cc:822
+msgid "SIGTSTP"
+msgstr "SIGTSTP"
-#~ msgid "Text color:"
-#~ msgstr "文字顏色:"
+#: SensorDisplayLib/ProcessList.cc:823
+msgid "SIGTTIN"
+msgstr "SIGTTIN"
-#~ msgid "Alarm color:"
-#~ msgstr "警示顏色:"
+#: SensorDisplayLib/ProcessList.cc:824
+msgid "SIGTTOU"
+msgstr "SIGTTOU"
-#~ msgid "&Show unit"
-#~ msgstr "顯示單位(&S)"
+#: SensorDisplayLib/ProcessList.cc:825
+msgid "SIGUSR1"
+msgstr "SIGUSR1"
-#~ msgid "Enable this to append the unit to the title of the display."
-#~ msgstr "啟用此項來讓顯示的標題加上單位。"
+#: SensorDisplayLib/ProcessList.cc:826
+msgid "SIGUSR2"
+msgstr "SIGUSR2"
-#~ msgid "E&nable alarm"
-#~ msgstr "啟用警報(&E)"
+#: SensorDisplayLib/ProcessList.cc:829
+msgid "Send Signal"
+msgstr "送出信號"
-#~ msgid "&Enable alarm"
-#~ msgstr "啟用警報(&E)"
+#: SensorDisplayLib/ProcessList.cc:837
+msgid "Renice Process..."
+msgstr "調整程序優先值..."
-#~ msgid "Normal digit color:"
-#~ msgstr "一般數位顏色:"
+#: SensorDisplayLib/ProcessList.cc:885
+msgid ""
+"_n: Do you really want to send signal %1 to the selected process?\n"
+"Do you really want to send signal %1 to the %n selected processes?"
+msgstr "您確定要送出信號 %1 給選擇的 %n 個程序?"
-#~ msgid "Alarm digit color:"
-#~ msgstr "警報數位顏色:"
+#: SensorDisplayLib/ProcessList.cc:889
+msgid "Send"
+msgstr "傳送"
-#~ msgid "Grid color:"
-#~ msgstr "格子顏色:"
+#: SensorDisplayLib/ReniceDlg.cc:32
+msgid "Renice Process"
+msgstr "調整程序優先值"
-#~ msgid "Idle Load"
-#~ msgstr "閒置負載"
+#: SensorDisplayLib/ReniceDlg.cc:40
+msgid ""
+"You are about to change the scheduling priority of\n"
+"process %1. Be aware that only the Superuser (root)\n"
+"can decrease the nice level of a process. The lower\n"
+"the number is the higher the priority.\n"
+"\n"
+"Please enter the desired nice level:"
+msgstr ""
+"您即將變更程序 %1 的排程優先\n"
+"順序。請注意,只有超級使用者 (root)\n"
+"可以調低處理的排列層次。數字愈小\n"
+"則優先順序愈高。\n"
+"\n"
+"請輸入想要的排列層次:"
+
+#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
+msgid "It is impossible to connect to '%1'."
+msgstr "無法連線到「%1」。"
+
+#: SensorDisplayLib/SensorDisplay.cc:162
+msgid "Launch &System Guard"
+msgstr "啟動系統守衛(&S)"
+
+#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
+msgid "&Properties"
+msgstr "屬性(&P)"
+
+#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
+msgid "&Remove Display"
+msgstr "移除顯示(&R)"
+
+#: SensorDisplayLib/SensorDisplay.cc:169
+msgid "&Setup Update Interval..."
+msgstr "設定更新間隔(&S)..."
+
+#: SensorDisplayLib/SensorDisplay.cc:171
+msgid "&Continue Update"
+msgstr "持續更新(&C)"
+
+#: SensorDisplayLib/SensorDisplay.cc:173
+msgid "P&ause Update"
+msgstr "暫停更新(&A)"
+
+#: SensorDisplayLib/SensorDisplay.cc:240
+msgid ""
+"<qt><p>This is a sensor display. To customize a sensor display click and "
+"hold the right mouse button on either the frame or the display box and "
+"select the <i>Properties</i> entry from the popup menu. Select <i>Remove</i> "
+"to delete the display from the worksheet.</p>%1</qt>"
+msgstr ""
+"<qt><p>這是偵測器顯示。要自訂一個偵測器顯示,在外框或顯示方塊上按下並按住滑鼠"
+"右鍵並選擇跳出選單中的 <i>內容</i> 項目。選擇 <i>移除</i> 可以從工作表中刪除"
+"顯示。</p>%1</qt>"
-#~ msgid "System Load"
-#~ msgstr "系統負載"
+#: SensorDisplayLib/SensorLogger.cc:136
+msgid "Logging"
+msgstr "紀錄"
-#~ msgid "Nice Load"
-#~ msgstr "優先負載"
+#: SensorDisplayLib/SensorLogger.cc:137
+#: SensorDisplayLib/SensorLoggerDlgWidget.ui:48
+#, no-c-format
+msgid "Timer Interval"
+msgstr "計時間隔"
-#~ msgid "User Load"
-#~ msgstr "使用者負載"
+#: SensorDisplayLib/SensorLogger.cc:138
+msgid "Sensor Name"
+msgstr "偵測器名稱"
-#~ msgid "Memory"
-#~ msgstr "記憶體"
+#: SensorDisplayLib/SensorLogger.cc:139
+msgid "Host Name"
+msgstr "主機名稱"
-#~ msgid "Cached Memory"
-#~ msgstr "快取記憶體"
+#: SensorDisplayLib/SensorLogger.cc:140
+msgid "Log File"
+msgstr "紀錄檔"
-#~ msgid "Buffered Memory"
-#~ msgstr "緩衝記憶體"
+#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
+msgid "Sensor Logger"
+msgstr "偵測記錄器"
-#~ msgid "Used Memory"
-#~ msgstr "已使用記憶體"
+#: SensorDisplayLib/SensorLogger.cc:383
+msgid "&Remove Sensor"
+msgstr "移除偵測器(&R)"
-#~ msgid "Application Memory"
-#~ msgstr "應用程式記憶體"
+#: SensorDisplayLib/SensorLogger.cc:384
+msgid "&Edit Sensor..."
+msgstr "編輯偵測器(&E)..."
-#~ msgid "Free Memory"
-#~ msgstr "剩餘記憶體"
+#: SensorDisplayLib/SensorLogger.cc:396
+msgid "St&op Logging"
+msgstr "停止紀錄(&O)"
-#~ msgid "Process Count"
-#~ msgstr "程序計數"
+#: SensorDisplayLib/SensorLogger.cc:398
+msgid "S&tart Logging"
+msgstr "開始紀錄(&T)"
-#~ msgid "Process Controller"
-#~ msgstr "程序控制器"
+#: SensorDisplayLib/SensorLoggerSettings.cc:26
+msgid "Sensor Logger Settings"
+msgstr "偵測記錄器設定"
-#~ msgid "Disk Throughput"
-#~ msgstr "磁碟輸出"
+#: WorkSheet.cc:109
+msgid ""
+"The file %1 does not contain a valid worksheet definition, which must have a "
+"document type 'KSysGuardWorkSheet'."
+msgstr ""
+"檔案 %1 不包含有效的工作表定義,其中必須有“KsysGuardWorkSheet”的文件類型。"
-#~ msgid ""
-#~ "_: CPU Load\n"
-#~ "Load"
-#~ msgstr "負載"
+#: WorkSheet.cc:125
+msgid "The file %1 has an invalid worksheet size."
+msgstr "檔案 %1 含有不合法的工作表大小。"
-#~ msgid "Total Accesses"
-#~ msgstr "總存取數"
+#: WorkSheet.cc:273
+msgid "The clipboard does not contain a valid display description."
+msgstr "剪貼簿並沒有包含合法的顯示敘述。"
-#~ msgid "Read Accesses"
-#~ msgstr "讀取存取數"
+#: WorkSheet.cc:334
+msgid "&BarGraph"
+msgstr "長條圖(&B)"
-#~ msgid "Write Accesses"
-#~ msgstr "寫入存取數"
+#: WorkSheet.cc:335
+msgid "S&ensorLogger"
+msgstr "偵測記錄器(&E)"
-#~ msgid "Read Data"
-#~ msgstr "讀取資料"
+#: WorkSheetSettings.cc:41
+msgid "Worksheet Properties"
+msgstr "工作表屬性"
-#~ msgid "Write Data"
-#~ msgstr "寫入資料"
+#: WorkSheetSettings.cc:67
+msgid "Rows:"
+msgstr "列:"
-#~ msgid "Pages In"
-#~ msgstr "進入交換頁"
+#: WorkSheetSettings.cc:76
+msgid "Columns:"
+msgstr "欄:"
-#~ msgid "Pages Out"
-#~ msgstr "離開交換頁"
+#: WorkSheetSettings.cc:97
+msgid "Enter the number of rows the sheet should have."
+msgstr "請輸入該工作表應有的列數。"
-#~ msgid "Context Switches"
-#~ msgstr "內容切換"
+#: WorkSheetSettings.cc:98
+msgid "Enter the number of columns the sheet should have."
+msgstr "請輸入該工作表應有的欄位數量。"
-#~ msgid "Network"
-#~ msgstr "網路"
+#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
+msgid "All displays of the sheet are updated at the rate specified here."
+msgstr "所有的工作表顯示都會依照這邊設定的頻率更新。"
-#~ msgid "Interfaces"
-#~ msgstr "界面"
+#: WorkSheetSettings.cc:100
+msgid "Enter the title of the worksheet here."
+msgstr "在這裡輸入工作表的標題。"
-#~ msgid "Receiver"
-#~ msgstr "接收者"
+#: Workspace.cc:53
+msgid ""
+"This is your work space. It holds your worksheets. You need to create a new "
+"worksheet (Menu File->New) before you can drag sensors here."
+msgstr ""
+"這是您的工作空間。他保存您的工作表。在您能拖曳新的偵測器前, 您必須建立新的工"
+"作表(選單 檔案 -> 新增)。"
-#~ msgid "Transmitter"
-#~ msgstr "發送者"
+#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52 ksysguard.cc:171
+msgid "System Load"
+msgstr "系統負載"
-#~ msgid "Data"
-#~ msgstr "資料"
+#: Workspace.cc:105 ksysguard.cc:176
+msgid "Process Table"
+msgstr "程序表"
-#~ msgid "Compressed Packets"
-#~ msgstr "壓縮的封包"
+#: Workspace.cc:135
+#, c-format
+msgid "Sheet %1"
+msgstr "工作表 %1"
-#~ msgid "Dropped Packets"
-#~ msgstr "丟棄的封包"
+#: Workspace.cc:165 Workspace.cc:305
+msgid ""
+"The worksheet '%1' contains unsaved data.\n"
+"Do you want to save the worksheet?"
+msgstr ""
+"工作表“%1”包含未儲存的資料。\n"
+"您是否要儲存工作表?"
-#~ msgid "Errors"
-#~ msgstr "錯誤"
+#: Workspace.cc:181 Workspace.cc:235
+msgid "*.sgrd|Sensor Files"
+msgstr "*.sgrd|偵測器檔案"
-#~ msgid "FIFO Overruns"
-#~ msgstr "FIFO 氾濫"
+#: Workspace.cc:184
+msgid "Select Worksheet to Load"
+msgstr "選擇要載入的工作表"
-#~ msgid "Frame Errors"
-#~ msgstr "框架錯誤"
+#: Workspace.cc:229 Workspace.cc:269
+msgid "You do not have a worksheet that could be saved."
+msgstr "您沒有可以被儲存的工作表。"
-#~ msgid "Multicast"
-#~ msgstr "多點傳送"
+#: Workspace.cc:239
+msgid "Save Current Worksheet As"
+msgstr "另存目前的工作表為"
-#~ msgid "Packets"
-#~ msgstr "封包"
+#: Workspace.cc:320
+msgid "There are no worksheets that could be deleted."
+msgstr "沒有可以刪除的工作表。"
-#~ msgid "Carrier"
-#~ msgstr "載波"
+#: Workspace.cc:448
+msgid "Cannot find file ProcessTable.sgrd."
+msgstr "找不到檔案 ProcessTable.sgrd。"
-#~ msgid "Collisions"
-#~ msgstr "碰撞"
+#: ksgrd/HostConnector.cc:37
+msgid "Connect Host"
+msgstr "連接主機"
-#~ msgid "Sockets"
-#~ msgstr "Sockets"
+#: ksgrd/HostConnector.cc:44
+msgid "Host:"
+msgstr "主機:"
-#~ msgid "Total Number"
-#~ msgstr "總量"
+#: ksgrd/HostConnector.cc:54
+msgid "Enter the name of the host you want to connect to."
+msgstr "輸入您要連線的主機名稱。"
-#~ msgid "Table"
-#~ msgstr "表格"
+#: ksgrd/HostConnector.cc:61
+msgid "Connection Type"
+msgstr "連線類型"
-#~ msgid "Advanced Power Management"
-#~ msgstr "進階電源管理"
+#: ksgrd/HostConnector.cc:66
+msgid "ssh"
+msgstr "ssh"
-#~ msgid "ACPI"
-#~ msgstr "ACPI"
+#: ksgrd/HostConnector.cc:69
+msgid "Select this to use the secure shell to login to the remote host."
+msgstr "選擇此項以使用安全的系統殼登入遠端主機。"
-#~ msgid "Thermal Zone"
-#~ msgstr "高溫區"
+#: ksgrd/HostConnector.cc:72
+msgid "rsh"
+msgstr "rsh"
-#~ msgid "Temperature"
-#~ msgstr "溫度"
+#: ksgrd/HostConnector.cc:73
+msgid "Select this to use the remote shell to login to the remote host."
+msgstr "選擇此項以使用遠端的命令殼登入遠端主機。"
-#~ msgid "Fan"
-#~ msgstr "風扇"
+#: ksgrd/HostConnector.cc:76
+msgid "Daemon"
+msgstr "伺服程式"
-#~ msgid "State"
-#~ msgstr "狀態"
+#: ksgrd/HostConnector.cc:77
+msgid ""
+"Select this if you want to connect to a ksysguard daemon that is running on "
+"the machine you want to connect to, and is listening for client requests."
+msgstr ""
+"如果您想要連線到在您要連接的機器上執行並聽取客戶端要求ksysguard 伺服程式,請"
+"選擇此項。"
-#~ msgid "Battery"
-#~ msgstr "電池"
+#: ksgrd/HostConnector.cc:80
+msgid "Custom command"
+msgstr "自訂指令"
-#~ msgid "Battery Charge"
-#~ msgstr "電池充電"
+#: ksgrd/HostConnector.cc:81
+msgid ""
+"Select this to use the command you entered below to start ksysguardd on the "
+"remote host."
+msgstr "選擇這個以使用您在下面輸入的命令啟動遠端主機的 ksysguardd。"
-#~ msgid "Battery Usage"
-#~ msgstr "電池用量"
+#: ksgrd/HostConnector.cc:84
+msgid "Port:"
+msgstr "埠號:"
-#~ msgid "Remaining Time"
-#~ msgstr "剩餘時間"
+#: ksgrd/HostConnector.cc:90
+msgid ""
+"Enter the port number on which the ksysguard daemon is listening for "
+"connections."
+msgstr "輸入 Ksysguard 伺服程式聽取連線的埠號。"
-#~ msgid "Interrupts"
-#~ msgstr "中斷"
+#: ksgrd/HostConnector.cc:93
+msgid "e.g. 3112"
+msgstr "例如 3112"
-#~ msgid "Load Average (5 min)"
-#~ msgstr "平均負載(5 分鐘)"
+#: ksgrd/HostConnector.cc:96
+msgid "Command:"
+msgstr "指令:"
-#~ msgid "Load Average (15 min)"
-#~ msgstr "平均負載(15 分鐘)"
+#: ksgrd/HostConnector.cc:105
+msgid "Enter the command that runs ksysguardd on the host you want to monitor."
+msgstr "輸入啟動您要監視的主機上 ksysguardd 的命令。"
-#~ msgid "Clock Frequency"
-#~ msgstr "時鐘頻率"
+#: ksgrd/HostConnector.cc:109
+msgid "e.g. ssh -l root remote.host.org ksysguardd"
+msgstr "例如 ssh -l root remote.host.org ksysguardd"
-#~ msgid "Hardware Sensors"
-#~ msgstr "硬體偵測器"
+#: ksgrd/SensorAgent.cc:88
+msgid ""
+"Message from %1:\n"
+"%2"
+msgstr ""
+"來自 %1 的訊息:\n"
+"%2"
-#~ msgid "Partition Usage"
-#~ msgstr "分割區使用量"
+#: SystemLoad.sgrd:5 ksgrd/SensorManager.cc:50
+msgid "CPU Load"
+msgstr "CPU 負載"
-#~ msgid "Used Space"
-#~ msgstr "已使用空間"
+#: ksgrd/SensorManager.cc:51
+msgid "Idle Load"
+msgstr "閒置負載"
-#~ msgid "Free Space"
-#~ msgstr "剩餘空間"
+#: ksgrd/SensorManager.cc:53
+msgid "Nice Load"
+msgstr "優先負載"
-#~ msgid "Fill Level"
-#~ msgstr "填滿等級"
+#: ksgrd/SensorManager.cc:54
+msgid "User Load"
+msgstr "使用者負載"
-#~ msgid "CPU%1"
-#~ msgstr "CPU%1"
+#: ksgrd/SensorManager.cc:55
+msgid "Memory"
+msgstr "記憶體"
-#~ msgid "Disk%1"
-#~ msgstr "磁碟%1"
+#: SystemLoad.sgrd:13 ksgrd/SensorManager.cc:56
+msgid "Physical Memory"
+msgstr "實體記憶體"
-#~ msgid "Fan%1"
-#~ msgstr "風扇%1"
+#: SystemLoad.sgrd:21 ksgrd/SensorManager.cc:57
+msgid "Swap Memory"
+msgstr "交換記憶體"
-#~ msgid "Temperature%1"
-#~ msgstr "溫度%1"
+#: ksgrd/SensorManager.cc:58
+msgid "Cached Memory"
+msgstr "快取記憶體"
-#~ msgid "Total"
-#~ msgstr "總計"
+#: ksgrd/SensorManager.cc:59
+msgid "Buffered Memory"
+msgstr "緩衝記憶體"
-#~ msgid "Int%1"
-#~ msgstr "中斷%1"
+#: ksgrd/SensorManager.cc:60
+msgid "Used Memory"
+msgstr "已使用記憶體"
-#~ msgid ""
-#~ "_: the unit 1 per second\n"
-#~ "1/s"
-#~ msgstr "1/s"
+#: ksgrd/SensorManager.cc:61
+msgid "Application Memory"
+msgstr "應用程式記憶體"
-#~ msgid "kBytes"
-#~ msgstr "千位元組"
+#: ksgrd/SensorManager.cc:62
+msgid "Free Memory"
+msgstr "剩餘記憶體"
-#~ msgid ""
-#~ "_: the unit minutes\n"
-#~ "min"
-#~ msgstr "分"
+#: ksgrd/SensorManager.cc:63
+#, fuzzy
+msgid "Active Memory"
+msgstr "應用程式記憶體"
-#~ msgid ""
-#~ "_: the frequency unit\n"
-#~ "MHz"
-#~ msgstr "MHz"
+#: ksgrd/SensorManager.cc:64
+#, fuzzy
+msgid "Inactive Memory"
+msgstr "快取記憶體"
-#~ msgid "Integer Value"
-#~ msgstr "整數值"
+#: ksgrd/SensorManager.cc:65
+#, fuzzy
+msgid "Wired Memory"
+msgstr "已使用記憶體"
-#~ msgid "Floating Point Value"
-#~ msgstr "浮點數"
+#: ksgrd/SensorManager.cc:66
+msgid "Exec Pages"
+msgstr ""
-#~ msgid "Connection to %1 has been lost."
-#~ msgstr "失去到 %1 的連線。"
+#: ksgrd/SensorManager.cc:67
+msgid "File Pages"
+msgstr ""
-#~ msgid "Global Style Settings"
-#~ msgstr "整體風格設定"
+#: ksgrd/SensorManager.cc:68
+msgid "Process Count"
+msgstr "程序計數"
-#~ msgid "Display Style"
-#~ msgstr "顯示風格"
+#: ksgrd/SensorManager.cc:69 ksgrd/SensorManager.cc:153
+msgid "Process Controller"
+msgstr "程序控制器"
-#~ msgid "First foreground color:"
-#~ msgstr "第一前景色彩:"
+#: ksgrd/SensorManager.cc:70
+msgid "Disk Throughput"
+msgstr "磁碟輸出"
-#~ msgid "Second foreground color:"
-#~ msgstr "第二前景色彩:"
+#: ksgrd/SensorManager.cc:71
+msgid ""
+"_: CPU Load\n"
+"Load"
+msgstr "負載"
-#~ msgid "Sensor Colors"
-#~ msgstr "偵測器顏色"
+#: ksgrd/SensorManager.cc:72
+msgid "Total Accesses"
+msgstr "總存取數"
-#~ msgid "Change Color..."
-#~ msgstr "改變顏色..."
+#: ksgrd/SensorManager.cc:73
+msgid "Read Accesses"
+msgstr "讀取存取數"
-#~ msgid "Color %1"
-#~ msgstr "顏色 %1"
+#: ksgrd/SensorManager.cc:74
+msgid "Write Accesses"
+msgstr "寫入存取數"
-#~ msgid "Connection to %1 refused"
-#~ msgstr "到 %1 的連線被拒絕!"
+#: ksgrd/SensorManager.cc:75
+msgid "Read Data"
+msgstr "讀取資料"
-#~ msgid "Host %1 not found"
-#~ msgstr "找不到主機 %1"
+#: ksgrd/SensorManager.cc:76
+msgid "Write Data"
+msgstr "寫入資料"
-#~ msgid "Timeout at host %1"
-#~ msgstr "主機 %1 逾時"
+#: ksgrd/SensorManager.cc:77
+msgid "Pages In"
+msgstr "進入交換頁"
-#~ msgid "Network failure host %1"
-#~ msgstr "主機 %1 網路失敗"
+#: ksgrd/SensorManager.cc:78
+msgid "Pages Out"
+msgstr "離開交換頁"
-#~ msgid "Timer Settings"
-#~ msgstr "計時器設定"
+#: ksgrd/SensorManager.cc:79
+msgid "Context Switches"
+msgstr "內容切換"
-#~ msgid "Use update interval of worksheet"
-#~ msgstr "使用工作表更新間隔"
+#: ksgrd/SensorManager.cc:80
+msgid "Network"
+msgstr "網路"
-#~ msgid "All displays of the sheet are updated at the rate specified here."
-#~ msgstr "所有的工作表顯示都會依照這邊設定的頻率更新。"
+#: ksgrd/SensorManager.cc:81
+msgid "Interfaces"
+msgstr "界面"
-#~ msgid "Connect Host"
-#~ msgstr "連接主機"
+#: ksgrd/SensorManager.cc:82
+msgid "Receiver"
+msgstr "接收者"
-#~ msgid "Host:"
-#~ msgstr "主機:"
+#: ksgrd/SensorManager.cc:83
+msgid "Transmitter"
+msgstr "發送者"
-#~ msgid "Enter the name of the host you want to connect to."
-#~ msgstr "輸入您要連線的主機名稱。"
+#: ksgrd/SensorManager.cc:84
+msgid "Data"
+msgstr "資料"
-#~ msgid "Connection Type"
-#~ msgstr "連線類型"
+#: ksgrd/SensorManager.cc:85
+msgid "Compressed Packets"
+msgstr "壓縮的封包"
-#~ msgid "ssh"
-#~ msgstr "ssh"
+#: ksgrd/SensorManager.cc:86
+msgid "Dropped Packets"
+msgstr "丟棄的封包"
-#~ msgid "Select this to use the secure shell to login to the remote host."
-#~ msgstr "選擇此項以使用安全的系統殼登入遠端主機。"
+#: ksgrd/SensorManager.cc:87
+msgid "Errors"
+msgstr "錯誤"
-#~ msgid "rsh"
-#~ msgstr "rsh"
+#: ksgrd/SensorManager.cc:88
+msgid "FIFO Overruns"
+msgstr "FIFO 氾濫"
-#~ msgid "Select this to use the remote shell to login to the remote host."
-#~ msgstr "選擇此項以使用遠端的命令殼登入遠端主機。"
+#: ksgrd/SensorManager.cc:89
+msgid "Frame Errors"
+msgstr "框架錯誤"
-#~ msgid "Daemon"
-#~ msgstr "伺服程式"
+#: ksgrd/SensorManager.cc:90
+msgid "Multicast"
+msgstr "多點傳送"
-#~ msgid ""
-#~ "Select this if you want to connect to a ksysguard daemon that is running "
-#~ "on the machine you want to connect to, and is listening for client "
-#~ "requests."
-#~ msgstr ""
-#~ "如果您想要連線到在您要連接的機器上執行並聽取客戶端要求ksysguard 伺服程式,"
-#~ "請選擇此項。"
+#: ksgrd/SensorManager.cc:91
+msgid "Packets"
+msgstr "封包"
-#~ msgid "Custom command"
-#~ msgstr "自訂指令"
+#: ksgrd/SensorManager.cc:92
+msgid "Carrier"
+msgstr "載波"
-#~ msgid ""
-#~ "Select this to use the command you entered below to start ksysguardd on "
-#~ "the remote host."
-#~ msgstr "選擇這個以使用您在下面輸入的命令啟動遠端主機的 ksysguardd。"
+#: ksgrd/SensorManager.cc:93
+msgid "Collisions"
+msgstr "碰撞"
-#~ msgid "Port:"
-#~ msgstr "埠號:"
+#: ksgrd/SensorManager.cc:94
+msgid "Sockets"
+msgstr "Sockets"
-#~ msgid ""
-#~ "Enter the port number on which the ksysguard daemon is listening for "
-#~ "connections."
-#~ msgstr "輸入 Ksysguard 伺服程式聽取連線的埠號。"
+#: ksgrd/SensorManager.cc:95
+msgid "Total Number"
+msgstr "總量"
-#~ msgid "e.g. 3112"
-#~ msgstr "例如 3112"
+#: ksgrd/SensorManager.cc:96 ksgrd/SensorManager.cc:154
+msgid "Table"
+msgstr "表格"
-#~ msgid "Command:"
-#~ msgstr "指令:"
+#: ksgrd/SensorManager.cc:97
+msgid "Advanced Power Management"
+msgstr "進階電源管理"
-#~ msgid ""
-#~ "Enter the command that runs ksysguardd on the host you want to monitor."
-#~ msgstr "輸入啟動您要監視的主機上 ksysguardd 的命令。"
+#: ksgrd/SensorManager.cc:98
+msgid "ACPI"
+msgstr "ACPI"
-#~ msgid "e.g. ssh -l root remote.host.org ksysguardd"
-#~ msgstr "例如 ssh -l root remote.host.org ksysguardd"
+#: ksgrd/SensorManager.cc:99
+msgid "Thermal Zone"
+msgstr "高溫區"
-#~ msgid ""
-#~ "Message from %1:\n"
-#~ "%2"
-#~ msgstr ""
-#~ "來自 %1 的訊息:\n"
-#~ "%2"
+#: ksgrd/SensorManager.cc:100
+msgid "Temperature"
+msgstr "溫度"
-#~ msgid "Sensor Browser"
-#~ msgstr "偵測器瀏覽程式"
+#: ksgrd/SensorManager.cc:101
+msgid "Fan"
+msgstr "風扇"
-#~ msgid "Sensor Type"
-#~ msgstr "偵測器類型"
+#: ksgrd/SensorManager.cc:102
+msgid "State"
+msgstr "狀態"
-#~ msgid "Drag sensors to empty cells of a worksheet or the panel applet."
-#~ msgstr "將偵測器拖曳到工作表或是面板小程式中的空白欄位。"
+#: ksgrd/SensorManager.cc:103
+msgid "Battery"
+msgstr "電池"
-#~ msgid ""
-#~ "The sensor browser lists the connected hosts and the sensors that they "
-#~ "provide. Click and drag sensors into drop zones of a worksheet or the "
-#~ "panel applet. A display will appear that visualizes the values provided "
-#~ "by the sensor. Some sensor displays can display values of multiple "
-#~ "sensors. Simply drag other sensors on to the display to add more sensors."
-#~ msgstr ""
-#~ "偵測器瀏覽器列出目前連線的主機與他們所提供的偵測器。拖曳偵測器到工作表或面"
-#~ "板小程式。顯示器將出現偵測器並提供視覺化顯示的數值。有些偵測器顯示可以顯示"
-#~ "多個偵測器的數值。只要拖曳其他的偵測器到顯示器上便可以增加偵測器。"
+#: ksgrd/SensorManager.cc:104
+msgid "Battery Charge"
+msgstr "電池充電"
-#~ msgid "Drag sensors to empty fields in a worksheet."
-#~ msgstr "將偵測器拖曳到工作表中的空白欄位。"
+#: ksgrd/SensorManager.cc:105
+msgid "Battery Usage"
+msgstr "電池用量"
-#~ msgid "Worksheet Properties"
-#~ msgstr "工作表屬性"
+#: ksgrd/SensorManager.cc:106
+msgid "Remaining Time"
+msgstr "剩餘時間"
-#~ msgid "Rows:"
-#~ msgstr "列:"
+#: ksgrd/SensorManager.cc:107
+msgid "Interrupts"
+msgstr "中斷"
-#~ msgid "Columns:"
-#~ msgstr "欄:"
+#: SystemLoad.sgrd:10 ksgrd/SensorManager.cc:108
+msgid "Load Average (1 min)"
+msgstr "平均負載(1 分鐘)"
-#~ msgid "Enter the number of rows the sheet should have."
-#~ msgstr "請輸入該工作表應有的列數。"
+#: ksgrd/SensorManager.cc:109
+msgid "Load Average (5 min)"
+msgstr "平均負載(5 分鐘)"
-#~ msgid "Enter the number of columns the sheet should have."
-#~ msgstr "請輸入該工作表應有的欄位數量。"
+#: ksgrd/SensorManager.cc:110
+msgid "Load Average (15 min)"
+msgstr "平均負載(15 分鐘)"
-#~ msgid "Enter the title of the worksheet here."
-#~ msgstr "在這裡輸入工作表的標題。"
+#: ksgrd/SensorManager.cc:111
+msgid "Clock Frequency"
+msgstr "時鐘頻率"
-#~ msgid "TDE system guard"
-#~ msgstr "TDE 系統守衛"
+#: ksgrd/SensorManager.cc:112
+msgid "Hardware Sensors"
+msgstr "硬體偵測器"
-#~ msgid "TDE System Guard"
-#~ msgstr "TDE 系統守衛"
+#: ksgrd/SensorManager.cc:113
+msgid "Partition Usage"
+msgstr "分割區使用量"
-#~ msgid "88888 Processes"
-#~ msgstr "88888 個程序"
+#: ksgrd/SensorManager.cc:114
+msgid "Used Space"
+msgstr "已使用空間"
-#~ msgid "Memory: 88888888888 kB used, 88888888888 kB free"
-#~ msgstr "記憶體:已使用 88888888888 kB,剩餘 88888888888 kB"
+#: ksgrd/SensorManager.cc:115
+msgid "Free Space"
+msgstr "剩餘空間"
-#~ msgid "Swap: 888888888 kB used, 888888888 kB free"
-#~ msgstr "置換區:已使用 888888888 kB,剩餘 888888888 kB"
+#: ksgrd/SensorManager.cc:116
+msgid "Fill Level"
+msgstr "填滿等級"
-#~ msgid "&New Worksheet..."
-#~ msgstr "新增工作表(&N)..."
+#: ksgrd/SensorManager.cc:120
+#, c-format
+msgid "CPU%1"
+msgstr "CPU%1"
-#~ msgid "Import Worksheet..."
-#~ msgstr "匯入工作表..."
+#: ksgrd/SensorManager.cc:122
+#, c-format
+msgid "Disk%1"
+msgstr "磁碟%1"
-#~ msgid "&Import Recent Worksheet"
-#~ msgstr "匯入最近的工作表(&I)..."
+#: ksgrd/SensorManager.cc:127
+#, c-format
+msgid "Fan%1"
+msgstr "風扇%1"
-#~ msgid "&Remove Worksheet"
-#~ msgstr "移除工作表"
+#: ksgrd/SensorManager.cc:129
+#, c-format
+msgid "Temperature%1"
+msgstr "溫度%1"
-#~ msgid "&Export Worksheet..."
-#~ msgstr "匯出工作表(&E)..."
+#: ksgrd/SensorManager.cc:132
+msgid "Total"
+msgstr "總計"
-#~ msgid "C&onnect Host..."
-#~ msgstr "連接主機(&O)..."
+#: ksgrd/SensorManager.cc:138
+#, c-format
+msgid "Int%1"
+msgstr "中斷%1"
-#~ msgid "D&isconnect Host"
-#~ msgstr "中斷連線主機(&I)"
+#: ksgrd/SensorManager.cc:145
+msgid ""
+"_: the unit 1 per second\n"
+"1/s"
+msgstr "1/s"
-#~ msgid "&Worksheet Properties"
-#~ msgstr "工作表屬性(&W)"
+#: ksgrd/SensorManager.cc:146
+msgid "kBytes"
+msgstr "千位元組"
-#~ msgid "Load Standard Sheets"
-#~ msgstr "讀取標準工作表"
+#: ksgrd/SensorManager.cc:147
+msgid ""
+"_: the unit minutes\n"
+"min"
+msgstr "分"
-#~ msgid "Configure &Style..."
-#~ msgstr "設定風格(&S)..."
+#: ksgrd/SensorManager.cc:148
+msgid ""
+"_: the frequency unit\n"
+"MHz"
+msgstr "MHz"
+
+#: ksgrd/SensorManager.cc:151
+msgid "Integer Value"
+msgstr "整數值"
+
+#: ksgrd/SensorManager.cc:152
+msgid "Floating Point Value"
+msgstr "浮點數"
+
+#: ksgrd/SensorManager.cc:294
+msgid "Connection to %1 has been lost."
+msgstr "失去到 %1 的連線。"
+
+#: ksgrd/SensorSocketAgent.cc:104
+msgid "Connection to %1 refused"
+msgstr "到 %1 的連線被拒絕!"
+
+#: ksgrd/SensorSocketAgent.cc:108
+msgid "Host %1 not found"
+msgstr "找不到主機 %1"
+
+#: ksgrd/SensorSocketAgent.cc:112
+#, c-format
+msgid "Timeout at host %1"
+msgstr "主機 %1 逾時"
+
+#: ksgrd/SensorSocketAgent.cc:116
+#, c-format
+msgid "Network failure host %1"
+msgstr "主機 %1 網路失敗"
+
+#: ksgrd/StyleSettings.cc:41
+msgid "Global Style Settings"
+msgstr "整體風格設定"
+
+#: ksgrd/StyleSettings.cc:44
+msgid "Display Style"
+msgstr "顯示風格"
+
+#: ksgrd/StyleSettings.cc:47
+msgid "First foreground color:"
+msgstr "第一前景色彩:"
+
+#: ksgrd/StyleSettings.cc:54
+msgid "Second foreground color:"
+msgstr "第二前景色彩:"
+
+#: SensorDisplayLib/SensorLoggerSettingsWidget.ui:107 ksgrd/StyleSettings.cc:61
+#, no-c-format
+msgid "Alarm color:"
+msgstr "警示顏色:"
+
+#: ksgrd/StyleSettings.cc:85
+msgid "Sensor Colors"
+msgstr "偵測器顏色"
+
+#: ksgrd/StyleSettings.cc:91
+msgid "Change Color..."
+msgstr "改變顏色..."
+
+#: ksgrd/StyleSettings.cc:166
+#, c-format
+msgid "Color %1"
+msgstr "顏色 %1"
+
+#: ksgrd/TimerSettings.cc:36
+msgid "Timer Settings"
+msgstr "計時器設定"
+
+#: ksgrd/TimerSettings.cc:43
+msgid "Use update interval of worksheet"
+msgstr "使用工作表更新間隔"
+
+#: ksysguard.cc:64
+msgid "TDE system guard"
+msgstr "TDE 系統守衛"
+
+#: ksysguard.cc:74 ksysguard.cc:556
+msgid "TDE System Guard"
+msgstr "TDE 系統守衛"
+
+#: ksysguard.cc:100
+msgid "88888 Processes"
+msgstr "88888 個程序"
+
+#: ksysguard.cc:101
+msgid "Memory: 88888888888 kB used, 88888888888 kB free"
+msgstr "記憶體:已使用 88888888888 kB,剩餘 88888888888 kB"
+
+#: ksysguard.cc:103
+msgid "Swap: 888888888 kB used, 888888888 kB free"
+msgstr "置換區:已使用 888888888 kB,剩餘 888888888 kB"
+
+#: ksysguard.cc:108
+msgid "&New Worksheet..."
+msgstr "新增工作表(&N)..."
+
+#: ksysguard.cc:111
+msgid "Import Worksheet..."
+msgstr "匯入工作表..."
-#~ msgid "Do you really want to restore the default worksheets?"
-#~ msgstr "您確定要復原預設工作表?"
+#: ksysguard.cc:114
+msgid "&Import Recent Worksheet"
+msgstr "匯入最近的工作表(&I)..."
-#~ msgid "Reset All Worksheets"
-#~ msgstr "重設所有工作表"
+#: ksysguard.cc:117
+msgid "&Remove Worksheet"
+msgstr "移除工作表"
-#~ msgid "Reset"
-#~ msgstr "重設"
+#: ksysguard.cc:120
+msgid "&Export Worksheet..."
+msgstr "匯出工作表(&E)..."
-#~ msgid "Process Table"
-#~ msgstr "程序表"
+#: ksysguard.cc:125
+msgid "C&onnect Host..."
+msgstr "連接主機(&O)..."
-#~ msgid ""
-#~ "_n: 1 Process\n"
-#~ "%n Processes"
-#~ msgstr "%n 個程序"
+#: ksysguard.cc:127
+msgid "D&isconnect Host"
+msgstr "中斷連線主機(&I)"
-#~ msgid "Memory: %1 %2 used, %3 %4 free"
-#~ msgstr "記憶體:已使用 %1 %2,剩餘 %3 %4"
+#: ksysguard.cc:133
+msgid "&Worksheet Properties"
+msgstr "工作表屬性(&W)"
-#~ msgid "No swap space available"
-#~ msgstr "沒有可用的置換空間"
+#: ksysguard.cc:136
+msgid "Load Standard Sheets"
+msgstr "讀取標準工作表"
-#~ msgid "Swap: %1 %2 used, %3 %4 free"
-#~ msgstr "交換區:已使用 %1 %2,剩餘 %3 %4"
+#: ksysguard.cc:140
+msgid "Configure &Style..."
+msgstr "設定風格(&S)..."
-#~ msgid "Show only process list of local host"
-#~ msgstr "只顯示本地端主機的程序清單"
+#: ksysguard.cc:157
+msgid "Do you really want to restore the default worksheets?"
+msgstr "您確定要復原預設工作表?"
-#~ msgid "Optional worksheet files to load"
-#~ msgstr "選擇性載入的工作表"
+#: ksysguard.cc:158
+msgid "Reset All Worksheets"
+msgstr "重設所有工作表"
-#~ msgid "(c) 1996-2002 The KSysGuard Developers"
-#~ msgstr "(c) 1996-2002 KSysGuard 開發者"
+#: ksysguard.cc:159
+msgid "Reset"
+msgstr "重設"
-#~ msgid ""
-#~ "Solaris Support\n"
-#~ "Parts derived (by permission) from the sunos5\n"
-#~ "module of William LeFebvre's \"top\" utility."
-#~ msgstr ""
-#~ "Solaris 支援\n"
-#~ "從 William LeFebvre's 「top」公用程式的 sunos5\n"
-#~ "模組得到(授權)的組件。"
+#: ksysguard.cc:436
+#, c-format
+msgid ""
+"_n: 1 Process\n"
+"%n Processes"
+msgstr "%n 個程序"
-#~ msgid ""
-#~ "This is your work space. It holds your worksheets. You need to create a "
-#~ "new worksheet (Menu File->New) before you can drag sensors here."
-#~ msgstr ""
-#~ "這是您的工作空間。他保存您的工作表。在您能拖曳新的偵測器前, 您必須建立新"
-#~ "的工作表(選單 檔案 -> 新增)。"
+#: ksysguard.cc:446
+msgid "Memory: %1 %2 used, %3 %4 free"
+msgstr "記憶體:已使用 %1 %2,剩餘 %3 %4"
-#~ msgid "Sheet %1"
-#~ msgstr "工作表 %1"
+#: ksysguard.cc:504
+msgid "No swap space available"
+msgstr "沒有可用的置換空間"
-#~ msgid ""
-#~ "The worksheet '%1' contains unsaved data.\n"
-#~ "Do you want to save the worksheet?"
-#~ msgstr ""
-#~ "工作表“%1”包含未儲存的資料。\n"
-#~ "您是否要儲存工作表?"
+#: ksysguard.cc:506
+msgid "Swap: %1 %2 used, %3 %4 free"
+msgstr "交換區:已使用 %1 %2,剩餘 %3 %4"
-#~ msgid "*.sgrd|Sensor Files"
-#~ msgstr "*.sgrd|偵測器檔案"
+#: ksysguard.cc:515
+msgid "Show only process list of local host"
+msgstr "只顯示本地端主機的程序清單"
-#~ msgid "Select Worksheet to Load"
-#~ msgstr "選擇要載入的工作表"
+#: ksysguard.cc:516
+msgid "Optional worksheet files to load"
+msgstr "選擇性載入的工作表"
-#~ msgid "You do not have a worksheet that could be saved."
-#~ msgstr "您沒有可以被儲存的工作表。"
+#: ksysguard.cc:558
+msgid "(c) 1996-2002 The KSysGuard Developers"
+msgstr "(c) 1996-2002 KSysGuard 開發者"
-#~ msgid "Save Current Worksheet As"
-#~ msgstr "另存目前的工作表為"
+#: ksysguard.cc:566
+msgid ""
+"Solaris Support\n"
+"Parts derived (by permission) from the sunos5\n"
+"module of William LeFebvre's \"top\" utility."
+msgstr ""
+"Solaris 支援\n"
+"從 William LeFebvre's 「top」公用程式的 sunos5\n"
+"模組得到(授權)的組件。"
+
+#: SensorDisplayLib/ListViewSettingsWidget.ui:82
+#: SensorDisplayLib/SensorLoggerSettingsWidget.ui:91
+#, no-c-format
+msgid "Text color:"
+msgstr "文字顏色:"
+
+#: SensorDisplayLib/ListViewSettingsWidget.ui:90
+#, no-c-format
+msgid "Grid color:"
+msgstr "格子顏色:"
+
+#: SensorDisplayLib/LogFileSettings.ui:17
+#, no-c-format
+msgid "Log File Settings"
+msgstr "紀錄檔案設定"
+
+#: SensorDisplayLib/LogFileSettings.ui:187
+#, no-c-format
+msgid "Select Font..."
+msgstr "選擇字型..."
+
+#: SensorDisplayLib/LogFileSettings.ui:199
+#, no-c-format
+msgid "Filter"
+msgstr "過濾器"
+
+#: SensorDisplayLib/LogFileSettings.ui:238
+#, no-c-format
+msgid "&Add"
+msgstr "新增(&A)"
+
+#: SensorDisplayLib/LogFileSettings.ui:254
+#, no-c-format
+msgid "&Change"
+msgstr "改變(&C)"
+
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:44
+#, no-c-format
+msgid "&Show unit"
+msgstr "顯示單位(&S)"
+
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:47
+#, no-c-format
+msgid "Enable this to append the unit to the title of the display."
+msgstr "啟用此項來讓顯示的標題加上單位。"
+
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:83
+#: SensorDisplayLib/SensorLoggerDlgWidget.ui:155
+#, no-c-format
+msgid "E&nable alarm"
+msgstr "啟用警報(&E)"
+
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:149
+#: SensorDisplayLib/SensorLoggerDlgWidget.ui:89
+#, no-c-format
+msgid "&Enable alarm"
+msgstr "啟用警報(&E)"
+
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:225
+#, no-c-format
+msgid "Normal digit color:"
+msgstr "一般數位顏色:"
+
+#: SensorDisplayLib/MultiMeterSettingsWidget.ui:233
+#, no-c-format
+msgid "Alarm digit color:"
+msgstr "警報數位顏色:"
-#~ msgid "There are no worksheets that could be deleted."
-#~ msgstr "沒有可以刪除的工作表。"
+#: KSysGuardApplet.xml:5
+msgid "CPU"
+msgstr "CPU"
-#~ msgid "Cannot find file ProcessTable.sgrd."
-#~ msgstr "找不到檔案 ProcessTable.sgrd。"
+#: KSysGuardApplet.xml:10
+msgid "Mem"
+msgstr "Mem"