From 8be002f4b0369dff86b93192190f0d2f081d26dc Mon Sep 17 00:00:00 2001 From: TDE Weblate Date: Sat, 15 Dec 2018 19:30:01 +0000 Subject: Update translation files Updated by Update PO files to match POT (msgmerge) hook in Weblate. --- tde-i18n-ga/messages/tdeadmin/kcmlilo.po | 184 ++++++++++++++++--------------- 1 file changed, 96 insertions(+), 88 deletions(-) (limited to 'tde-i18n-ga/messages/tdeadmin') diff --git a/tde-i18n-ga/messages/tdeadmin/kcmlilo.po b/tde-i18n-ga/messages/tdeadmin/kcmlilo.po index e8e8488c8c8..ae6aeea1dcb 100644 --- a/tde-i18n-ga/messages/tdeadmin/kcmlilo.po +++ b/tde-i18n-ga/messages/tdeadmin/kcmlilo.po @@ -1,7 +1,7 @@ msgid "" msgstr "" "Project-Id-Version: tdeadmin/kcmlilo.po\n" -"POT-Creation-Date: 2014-09-29 12:06-0500\n" +"POT-Creation-Date: 2018-12-13 14:15+0100\n" "PO-Revision-Date: 2004-12-03 14:52-0500\n" "Last-Translator: Kevin Patrick Scannell \n" "Language-Team: ga \n" @@ -10,6 +10,18 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" +#: _translatorinfo:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "Séamus Ó Ciardhuáin,Kevin Scannell" + +#: _translatorinfo:2 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "seoc at iolfree dot ie,scannell at slu dot edu" + #: kde-qt-common/EditWidget.cpp:43 msgid "Select..." msgstr "Roghnaigh..." @@ -26,12 +38,11 @@ msgstr "" #: kde-qt-common/general.cpp:55 msgid "" -"Select the drive or partition you want to install the LILO boot loader to here. " -"Unless you intend to use other boot managers in addition to LILO, this should " -"be the MBR (master boot record) of your boot drive." -"
In this case, you should probably select /dev/hda " -"if your boot drive is an IDE drive or /dev/sda " -"if your boot drive is SCSI." +"Select the drive or partition you want to install the LILO boot loader to " +"here. Unless you intend to use other boot managers in addition to LILO, this " +"should be the MBR (master boot record) of your boot drive.
In this case, " +"you should probably select /dev/hda if your boot drive is an IDE " +"drive or /dev/sda if your boot drive is SCSI." msgstr "" #: kde-qt-common/general.cpp:58 @@ -44,8 +55,8 @@ msgstr "/10 soicind" #: kde-qt-common/general.cpp:64 msgid "" -"LILO will wait the amount of time specified here before booting the kernel (or " -"OS) marked as default in the Images tab." +"LILO will wait the amount of time specified here before booting the kernel " +"(or OS) marked as default in the Images tab." msgstr "" #: kde-qt-common/general.cpp:67 @@ -54,12 +65,11 @@ msgstr "Úsáid an mód &líneach" #: kde-qt-common/general.cpp:69 msgid "" -"Check this box if you want to use the linear mode." -"
Linear mode tells the boot loader the location of kernels in linear " -"addressing rather than sector/head/cylinder." -"
linear mode is required for some SCSI drives, and shouldn't hurt unless " -"you're planning to create a boot disk to be used with a different computer." -"
See the lilo.conf man page for details." +"Check this box if you want to use the linear mode.
Linear mode tells the " +"boot loader the location of kernels in linear addressing rather than sector/" +"head/cylinder.
linear mode is required for some SCSI drives, and " +"shouldn't hurt unless you're planning to create a boot disk to be used with " +"a different computer.
See the lilo.conf man page for details." msgstr "" #: kde-qt-common/general.cpp:70 @@ -68,10 +78,10 @@ msgstr "Úsáid an mód dlúth" #: kde-qt-common/general.cpp:72 msgid "" -"Check this box if you want to use the compact mode." -"
The compact mode tries to merge read requests for adjacent sectors into a " -"single read request. This reduces load time and keeps the boot map smaller, but " -"will not work on all systems." +"Check this box if you want to use the compact mode.
The compact mode " +"tries to merge read requests for adjacent sectors into a single read " +"request. This reduces load time and keeps the boot map smaller, but will not " +"work on all systems." msgstr "" #: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85 @@ -81,8 +91,8 @@ msgstr "" #: kde-qt-common/general.cpp:78 msgid "" "Checking this box enables automatic recording of boot command lines as the " -"defaults for the following boots. This way, lilo \"locks\" on a choice until it " -"is manually overridden.\n" +"defaults for the following boots. This way, lilo \"locks\" on a choice until " +"it is manually overridden.\n" "This sets the lock option in lilo.conf." msgstr "" @@ -93,12 +103,11 @@ msgstr "&Cúngaigh paraiméadair" #: kde-qt-common/general.cpp:82 msgid "" "If this box is checked, a password (entered below) is required only if any " -"parameters are changed (i.e. the user can boot linux, but not " -"linux single or linux init=/bin/sh).\n" -"This sets the restricted option in lilo.conf." -"
This sets a default for all Linux kernels you want to boot. If you need a " -"per-kernel setting, go to the Operating systems tab and select " -"Details." +"parameters are changed (i.e. the user can boot linux, but not " +"linux single or linux init=/bin/sh).\n" +"This sets the restricted option in lilo.conf.
This sets a default " +"for all Linux kernels you want to boot. If you need a per-kernel setting, go " +"to the Operating systems tab and select Details." msgstr "" #: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93 @@ -111,10 +120,9 @@ msgid "" "above is checked, the password is required for additional parameters only." "
WARNING: The password is stored in clear text in /etc/lilo.conf. " "You'll want to make sure nobody untrusted can read this file. Also, you " -"probably don't want to use your normal/root password here." -"
This sets a default for all Linux kernels you want to boot. If you need a " -"per-kernel setting, go to the Operating systems tab and select " -"Details." +"probably don't want to use your normal/root password here.
This sets a " +"default for all Linux kernels you want to boot. If you need a per-kernel " +"setting, go to the Operating systems tab and select Details." msgstr "" #: kde-qt-common/general.cpp:97 @@ -123,13 +131,12 @@ msgstr "" #: kde-qt-common/general.cpp:100 msgid "" -"You can select the default graphics mode here." -"
If you intend to use a VGA graphics mode, you must compile the kernel with " -"support for framebuffer devices. The ask setting brings up a prompt at " -"boot time." -"
This sets a default for all Linux kernels you want to boot. If you need a " -"per-kernel setting, go to the Operating systems tab and select " -"Details." +"You can select the default graphics mode here.
If you intend to use a VGA " +"graphics mode, you must compile the kernel with support for framebuffer " +"devices. The ask setting brings up a prompt at boot time.
This " +"sets a default for all Linux kernels you want to boot. If you need a per-" +"kernel setting, go to the Operating systems tab and select " +"Details." msgstr "" #: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48 @@ -244,8 +251,8 @@ msgstr "" msgid "" "If this box is checked, LILO goes to the LILO prompt whether or not a key is " "pressed. If it is turned off, LILO boots the default operating system unless " -"shift is pressed (in that case, it goes to the LILO prompt)." -"
This sets the prompt option in lilo.conf." +"shift is pressed (in that case, it goes to the LILO prompt).
This sets " +"the prompt option in lilo.conf." msgstr "" #: kde-qt-common/images.cpp:53 @@ -277,8 +284,8 @@ msgstr "F&réamhchóras comhaid:" #: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189 msgid "" -"Enter the root filesystem (i.e. the partition that will be mounted as / at boot " -"time) for the kernel you want to boot here." +"Enter the root filesystem (i.e. the partition that will be mounted as / at " +"boot time) for the kernel you want to boot here." msgstr "" #: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190 @@ -298,9 +305,8 @@ msgstr "Paraiméadair breise:" #: kde-qt-common/images.cpp:72 msgid "" -"Enter any extra parameters you wish to pass to the kernel here. Usually, this " -"can be left blank." -"
This sets the append option in lilo.conf." +"Enter any extra parameters you wish to pass to the kernel here. Usually, " +"this can be left blank.
This sets the append option in lilo.conf." msgstr "" #: kde-qt-common/images.cpp:79 @@ -364,8 +370,7 @@ msgid "Remove entry from the boot menu" msgstr "" #: kde-qt-common/images.cpp:177 -msgid "" -"Configuration ok. LILO said:\n" +msgid "Configuration ok. LILO said:\n" msgstr "" #: kde-qt-common/images.cpp:178 @@ -373,8 +378,7 @@ msgid "Configuration OK" msgstr "" #: kde-qt-common/images.cpp:180 -msgid "" -"Configuration NOT ok. LILO said:\n" +msgid "Configuration NOT ok. LILO said:\n" msgstr "" #: kde-qt-common/images.cpp:181 @@ -429,10 +433,9 @@ msgstr "" #: kde/Details.cpp:47 qt/Details.cpp:47 msgid "" -"You can select the graphics mode for this kernel here." -"
If you intend to use a VGA graphics mode, you must compile the kernel with " -"support for framebuffer devices. The ask setting brings up a prompt at " -"boot time." +"You can select the graphics mode for this kernel here.
If you intend to " +"use a VGA graphics mode, you must compile the kernel with support for " +"framebuffer devices. The ask setting brings up a prompt at boot time." msgstr "" #: kde/Details.cpp:75 qt/Details.cpp:76 @@ -442,9 +445,9 @@ msgstr "" #: kde/Details.cpp:76 qt/Details.cpp:77 msgid "" "Mount the root filesystem for this kernel read-only. Since the init scripts " -"normally take care of remounting the root filesystem in read-write mode after " -"running some checks, this should always be turned on." -"
Don't turn this off unless you know what you're doing." +"normally take care of remounting the root filesystem in read-write mode " +"after running some checks, this should always be turned on.
Don't turn " +"this off unless you know what you're doing." msgstr "" #: kde/Details.cpp:78 qt/Details.cpp:80 @@ -453,26 +456,26 @@ msgstr "" #: kde/Details.cpp:79 msgid "" -"This turns off some sanity checks while writing the configuration. This should " -"not be used under \"normal\" circumstances, but it can be useful, for example, " -"by providing the capability of booting from a floppy disk, without having a " -"floppy in the drive every time you run lilo." -"
This sets the unsafe keyword in lilo.conf." +"This turns off some sanity checks while writing the configuration. This " +"should not be used under \"normal\" circumstances, but it can be useful, for " +"example, by providing the capability of booting from a floppy disk, without " +"having a floppy in the drive every time you run lilo.
This sets the " +"unsafe keyword in lilo.conf." msgstr "" #: kde/Details.cpp:83 qt/Details.cpp:86 msgid "" "Checking this box enables automatic recording of boot command lines as the " -"default for the following bootups. This way, lilo \"locks\" on a choice until " -"it is manually overridden." -"
This sets the lock option in lilo.conf" +"default for the following bootups. This way, lilo \"locks\" on a choice " +"until it is manually overridden.
This sets the lock option in lilo." +"conf" msgstr "" #: kde/Details.cpp:86 qt/Details.cpp:89 msgid "" "If this box is checked, a password (entered below) is required only if any " -"parameters are changed (i.e. the user can boot linux, but not " -"linux single or linux init=/bin/sh).\n" +"parameters are changed (i.e. the user can boot linux, but not " +"linux single or linux init=/bin/sh).\n" "This sets the restricted option in lilo.conf." msgstr "" @@ -500,10 +503,19 @@ msgstr "" #: qt/Details.cpp:81 msgid "" "This turns off some sanity checks while writing the configuration. This " -"shouldn't be used under \"normal\" circumstances, but it's useful, for example, " -"for installing the possibility to boot from a floppy disk without having a " -"floppy in the drive every time you run lilo." -"
This sets the unsafe keyword in lilo.conf." +"shouldn't be used under \"normal\" circumstances, but it's useful, for " +"example, for installing the possibility to boot from a floppy disk without " +"having a floppy in the drive every time you run lilo.
This sets the " +"unsafe keyword in lilo.conf." +msgstr "" + +#: qt/Details.cpp:102 qt/InputBox.cpp:47 qt/InputBox.cpp:52 +#: qt/standalone.cpp:58 +msgid "&OK" +msgstr "" + +#: qt/Details.cpp:103 qt/InputBox.cpp:48 qt/standalone.cpp:61 +msgid "&Cancel" msgstr "" #: qt/standalone.cpp:41 @@ -512,16 +524,20 @@ msgstr "&Cad É Seo?" #: qt/standalone.cpp:43 msgid "" -"The What's This? button is part of this program's help system. Click on " -"the What's This? button then on any widget in the window to get information " -"(like this) on it." +"The What's This? button is part of this program's help system. Click " +"on the What's This? button then on any widget in the window to get " +"information (like this) on it." +msgstr "" + +#: qt/standalone.cpp:45 +msgid "&Help" msgstr "" #: qt/standalone.cpp:47 msgid "" -"This button calls up the program's online help system. If it does nothing, no " -"help file has been written (yet); in that case, use the What's This " -"button on the left." +"This button calls up the program's online help system. If it does nothing, " +"no help file has been written (yet); in that case, use the What's This button on the left." msgstr "" #: qt/standalone.cpp:49 @@ -543,6 +559,10 @@ msgid "" "program." msgstr "" +#: qt/standalone.cpp:55 +msgid "&Apply" +msgstr "" + #: qt/standalone.cpp:56 msgid "This button saves all your changes without exiting." msgstr "" @@ -554,15 +574,3 @@ msgstr "" #: qt/standalone.cpp:62 msgid "This button exits the program without saving your changes." msgstr "" - -#: _translatorinfo.cpp:1 -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "Séamus Ó Ciardhuáin,Kevin Scannell" - -#: _translatorinfo.cpp:3 -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "seoc at iolfree dot ie,scannell at slu dot edu" -- cgit v1.2.3