From 0a3068399e3af480a253ac401793c0e6afadde3e Mon Sep 17 00:00:00 2001 From: Darrell Anderson Date: Fri, 23 Mar 2012 18:31:57 -0500 Subject: Fix KDE -> TDE branding. --- tde-i18n-gl/messages/tdelibs/kio.po | 98 +++++++------- tde-i18n-gl/messages/tdelibs/tdelibs.po | 214 +++++++++++++++---------------- tde-i18n-gl/messages/tdelibs/tdeprint.po | 212 +++++++++++++++--------------- 3 files changed, 262 insertions(+), 262 deletions(-) (limited to 'tde-i18n-gl/messages') diff --git a/tde-i18n-gl/messages/tdelibs/kio.po b/tde-i18n-gl/messages/tdelibs/kio.po index 434575f2035..fa222938713 100644 --- a/tde-i18n-gl/messages/tdelibs/kio.po +++ b/tde-i18n-gl/messages/tdelibs/kio.po @@ -455,11 +455,11 @@ msgstr "" #: kio/tcpslavebase.cpp:1008 msgid "" -"SSL certificate is being rejected as requested. You can disable this in the KDE " +"SSL certificate is being rejected as requested. You can disable this in the TDE " "Control Center." msgstr "" "O certificado SSL estase a rexeitar, como se quixo. Pode deshabilitar isto no " -"Centro de Control de KDE." +"Centro de Control de TDE." #: kio/tcpslavebase.cpp:1020 #, fuzzy @@ -1396,11 +1396,11 @@ msgstr "" #: kio/global.cpp:586 msgid "" -"When all else fails, please consider helping the KDE team or the third party " +"When all else fails, please consider helping the TDE team or the third party " "maintainer of this software by submitting a high quality bug report. If the " "software is provided by a third party, please contact them directly. Otherwise, " "first look to see if the same bug has been submitted by someone else by " -"searching at the KDE bug reporting website" +"searching at the TDE bug reporting website" ". If not, take note of the details given above, and include them in your bug " "report, along with as many other details as you think might help." msgstr "" @@ -1502,7 +1502,7 @@ msgstr "" #: kio/global.cpp:637 msgid "" "The program which provides compatibility with this protocol may not have been " -"updated with your last update of KDE. This can cause the program to be " +"updated with your last update of TDE. This can cause the program to be " "incompatible with the current version and thus not start." msgstr "" @@ -1539,7 +1539,7 @@ msgstr "" #: kio/global.cpp:665 #, fuzzy msgid "" -"The protocol %1 is not supported by the KDE programs currently " +"The protocol %1 is not supported by the TDE programs currently " "installed on this computer." msgstr "" "O protocolo `%1' non está soportado\n" @@ -1560,7 +1560,7 @@ msgstr "" #: kio/global.cpp:671 msgid "" -"You may perform a search on the Internet for a KDE program (called a kioslave " +"You may perform a search on the Internet for a TDE program (called a kioslave " "or ioslave) which supports this protocol. Places to search include http://kde-apps.org/ " "and http://freshmeat.net/." @@ -1585,7 +1585,7 @@ msgstr "" #: kio/global.cpp:685 msgid "" -"KDE is able to communicate through a protocol within a protocol; the protocol " +"TDE is able to communicate through a protocol within a protocol; the protocol " "specified is only for use in such situations, however this is not one of these " "situations. This is a rare event, and is likely to indicate a programming " "error." @@ -1600,14 +1600,14 @@ msgstr "" #: kio/global.cpp:694 msgid "" -"The requested action is not supported by the KDE program which is implementing " +"The requested action is not supported by the TDE program which is implementing " "the %1 protocol." msgstr "" #: kio/global.cpp:697 msgid "" -"This error is very much dependent on the KDE program. The additional " -"information should give you more information than is available to the KDE " +"This error is very much dependent on the TDE program. The additional " +"information should give you more information than is available to the TDE " "input/output architecture." msgstr "" @@ -1789,7 +1789,7 @@ msgstr "" #: kio/global.cpp:792 msgid "" "This means that a request was made which requires determining the contents of " -"the folder, and the KDE program supporting this protocol is unable to do so." +"the folder, and the TDE program supporting this protocol is unable to do so." msgstr "" #: kio/global.cpp:800 @@ -1799,7 +1799,7 @@ msgstr "" #: kio/global.cpp:801 msgid "" "UNIX environments are commonly able to link a file or folder to a separate name " -"and/or location. KDE detected a link or series of links that results in an " +"and/or location. TDE detected a link or series of links that results in an " "infinite loop - i.e. the file was (perhaps in a roundabout way) linked to " "itself." msgstr "" @@ -1830,7 +1830,7 @@ msgstr "" #: kio/global.cpp:822 msgid "" "UNIX environments are commonly able to link a file or folder to a separate name " -"and/or location. During the requested copy operation, KDE detected a link or " +"and/or location. During the requested copy operation, TDE detected a link or " "series of links that results in an infinite loop - i.e. the file was (perhaps " "in a roundabout way) linked to itself." msgstr "" @@ -1925,7 +1925,7 @@ msgstr "" #: kio/global.cpp:873 msgid "" -"KDE is able to communicate through a protocol within a protocol. This request " +"TDE is able to communicate through a protocol within a protocol. This request " "specified a protocol be used as such, however this protocol is not capable of " "such an action. This is a rare event, and is likely to indicate a programming " "error." @@ -2275,13 +2275,13 @@ msgstr "Autorización fallida, autenticación %1 non soportada" msgid "" "Although you may have supplied the correct authentication details, the " "authentication failed because the method that the server is using is not " -"supported by the KDE program implementing the protocol %1." +"supported by the TDE program implementing the protocol %1." msgstr "" #: kio/global.cpp:1101 msgid "" "Please file a bug at http://bugs.kde.org/ " -"to inform the KDE team of the unsupported authentication method." +"to inform the TDE team of the unsupported authentication method." msgstr "" #: kio/global.cpp:1107 @@ -2331,7 +2331,7 @@ msgid "" "
  • Timeout for establishing a connection: %1 seconds
    • " "
  • Timeout for receiving a response: %2 seconds
    • " "
  • Timeout for accessing proxy servers: %3 seconds
    • " -"Please note that you can alter these timeout settings in the KDE Control " +"Please note that you can alter these timeout settings in the TDE Control " "Center, by selecting Network -> Preferences." msgstr "" @@ -2672,7 +2672,7 @@ msgstr "&Editar..." #: kio/kmimetypechooser.cpp:104 #, fuzzy -msgid "Click this button to display the familiar KDE mime type editor." +msgid "Click this button to display the familiar TDE mime type editor." msgstr "Non ten permisos para crear ese directorio." #: kssl/ksslcertdlg.cc:61 @@ -2696,7 +2696,7 @@ msgstr "Certificado do Outro Extremo:" #: kssl/ksslcertdlg.cc:84 #, fuzzy -msgid "KDE SSL Certificate Dialog" +msgid "TDE SSL Certificate Dialog" msgstr "Estado do Certificado:" #: kssl/ksslcertdlg.cc:139 @@ -2832,12 +2832,12 @@ msgstr "" #: kssl/ksslkeygen.cc:48 #, fuzzy -msgid "KDE Certificate Request" +msgid "TDE Certificate Request" msgstr "Estado do Certificado:" #: kssl/ksslkeygen.cc:50 #, fuzzy -msgid "KDE Certificate Request - Password" +msgid "TDE Certificate Request - Password" msgstr "O certificado caducou." #: kssl/ksslkeygen.cc:93 @@ -2848,13 +2848,13 @@ msgstr "" "%1" #: kssl/ksslinfodlg.cc:120 kssl/ksslkeygen.cc:93 -msgid "KDE SSL Information" -msgstr "Información SSL de KDE" +msgid "TDE SSL Information" +msgstr "Información SSL de TDE" #: kssl/ksslkeygen.cc:97 misc/uiserver.cpp:1383 #, fuzzy -msgid "KDE" -msgstr "KDE" +msgid "TDE" +msgstr "TDE" #: kssl/ksslkeygen.cc:97 msgid "Please wait while the encryption keys are generated..." @@ -2911,8 +2911,8 @@ msgid "Current connection is not secured with SSL." msgstr "A conexión actual non está protexida con SSL." #: kssl/ksslinfodlg.cc:99 -msgid "SSL support is not available in this build of KDE." -msgstr "O soporte de SSL non está dispoñible nesta compilación de KDE." +msgid "SSL support is not available in this build of TDE." +msgstr "O soporte de SSL non está dispoñible nesta compilación de TDE." #: kssl/ksslinfodlg.cc:109 #, fuzzy @@ -3109,7 +3109,7 @@ msgstr "" #: misc/kfile/fileprops.cpp:240 msgid "" -"Opens a KDE properties dialog to allow viewing and modifying of metadata of the " +"Opens a TDE properties dialog to allow viewing and modifying of metadata of the " "given file(s)" msgstr "" @@ -3161,7 +3161,7 @@ msgstr "" #: misc/kwalletd/kwalletd.cpp:400 msgid "" -"KDE has requested to open the wallet '%1'. Please enter the password " +"TDE has requested to open the wallet '%1'. Please enter the password " "for this wallet below." msgstr "" @@ -3178,21 +3178,21 @@ msgstr "&Abrir" #: misc/kwalletd/kwalletd.cpp:414 msgid "" -"KDE has requested to open the wallet. This is used to store sensitive data in a " +"TDE has requested to open the wallet. This is used to store sensitive data in a " "secure fashion. Please enter a password to use with this wallet or click cancel " "to deny the application's request." msgstr "" #: misc/kwalletd/kwalletd.cpp:416 msgid "" -"The application '%1' has requested to open the KDE wallet. This is " +"The application '%1' has requested to open the TDE wallet. This is " "used to store sensitive data in a secure fashion. Please enter a password to " "use with this wallet or click cancel to deny the application's request." msgstr "" #: misc/kwalletd/kwalletd.cpp:423 msgid "" -"KDE has requested to create a new wallet named '%1" +"TDE has requested to create a new wallet named '%1" "'. Please choose a password for this wallet, or cancel to deny the " "application's request." msgstr "" @@ -3213,7 +3213,7 @@ msgstr "Creado:" #: misc/kwalletd/kwalletd.cpp:623 misc/kwalletd/kwalletd.cpp:634 #: misc/kwalletd/kwalletd.cpp:639 misc/kwalletd/kwalletd.cpp:1157 #, fuzzy -msgid "KDE Wallet Service" +msgid "TDE Wallet Service" msgstr "servicio de correo" #: misc/kwalletd/kwalletd.cpp:444 @@ -3223,7 +3223,7 @@ msgid "" msgstr "" #: misc/kwalletd/kwalletd.cpp:518 -msgid "KDE has requested access to the open wallet '%1'." +msgid "TDE has requested access to the open wallet '%1'." msgstr "" #: misc/kwalletd/kwalletd.cpp:520 @@ -3448,8 +3448,8 @@ msgid "" msgstr "" #: misc/uiserver.cpp:1384 -msgid "KDE Progress Information UI Server" -msgstr "Servidor UI de Información de Progreso de KDE" +msgid "TDE Progress Information UI Server" +msgstr "Servidor UI de Información de Progreso de TDE" #: misc/uiserver.cpp:1387 misc/uiserver.cpp:1388 msgid "Developer" @@ -4097,7 +4097,7 @@ msgstr "" #: kfile/knotifydialog.cpp:163 #, fuzzy msgid "Notification Settings" -msgstr "Servidor de Notificación de KDE" +msgstr "Servidor de Notificación de TDE" #: kfile/knotifydialog.cpp:309 msgid "" @@ -4405,7 +4405,7 @@ msgid "" "already exist). This extension is based on the file type that you have chosen " "to save in." "
    " -"
    If you do not want KDE to supply an extension for the filename, you can " +"
    If you do not want TDE to supply an extension for the filename, you can " "either turn this option off or you can suppress it by adding a period (.) to " "the end of the filename (the period will be automatically removed)." "If unsure, keep this option enabled as it makes your files more manageable." @@ -4416,7 +4416,7 @@ msgid "" "This button allows you to bookmark specific locations. Click on this button " "to open the bookmark menu where you may add, edit or select a bookmark." "

    These bookmarks are specific to the file dialog, but otherwise operate like " -"bookmarks elsewhere in KDE." +"bookmarks elsewhere in TDE." msgstr "" #: kfile/kfileiconview.cpp:62 @@ -5399,7 +5399,7 @@ msgstr "" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 16 #: rc.cpp:15 #, fuzzy, no-c-format -msgid "KDE Wallet Wizard" +msgid "TDE Wallet Wizard" msgstr "servicio de correo" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 23 @@ -5411,14 +5411,14 @@ msgstr "Introducción" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 56 #: rc.cpp:21 #, no-c-format -msgid "KWallet - The KDE Wallet System" +msgid "KWallet - The TDE Wallet System" msgstr "" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 81 #: rc.cpp:24 #, no-c-format msgid "" -"Welcome to KWallet, the KDE Wallet System. KWallet allows you to store your " +"Welcome to KWallet, the TDE Wallet System. KWallet allows you to store your " "passwords and other personal information on disk in an encrypted file, " "preventing others from viewing the information. This wizard will tell you " "about KWallet and help you configure it for the first time." @@ -5440,7 +5440,7 @@ msgstr "&Avanzado" #: rc.cpp:36 #, no-c-format msgid "" -"The KDE Wallet system stores your data in a wallet " +"The TDE Wallet system stores your data in a wallet " "file on your local hard disk. The data is only written in encrypted form, " "presently using the blowfish algorithm with your password as the key. When a " "wallet is opened, the wallet manager application will launch and display an " @@ -5459,7 +5459,7 @@ msgstr "Configuración da impresora" #: rc.cpp:42 #, no-c-format msgid "" -"Various applications may attempt to use the KDE wallet to store passwords or " +"Various applications may attempt to use the TDE wallet to store passwords or " "other information such as web form data and cookies. If you would like these " "applications to use the wallet, you must enable it now and choose a password. " "The password you choose cannot be recovered if it is lost, and will " @@ -5482,7 +5482,7 @@ msgstr "O certificado caducou." #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 301 #: rc.cpp:51 #, no-c-format -msgid "Yes, I wish to use the KDE wallet to store my personal information." +msgid "Yes, I wish to use the TDE wallet to store my personal information." msgstr "" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 390 @@ -5495,7 +5495,7 @@ msgstr "Nivel de Seguridade" #: rc.cpp:57 #, no-c-format msgid "" -"The KDE Wallet system allows you to control the level of security of your " +"The TDE Wallet system allows you to control the level of security of your " "personal data. Some of these settings do impact usability. While the default " "settings are generally acceptable for most users, you may wish to change some " "of them. You may further tune these settings from the KWallet control module." @@ -6191,8 +6191,8 @@ msgstr "Non se puido ler %1" #: ../kioslave/http/http_cache_cleaner.cpp:53 #: ../kioslave/http/http_cache_cleaner.cpp:194 -msgid "KDE HTTP cache maintenance tool" -msgstr "Ferramenta de mantemento da caché HTTP de KDE" +msgid "TDE HTTP cache maintenance tool" +msgstr "Ferramenta de mantemento da caché HTTP de TDE" #: ../kioslave/http/http_cache_cleaner.cpp:59 #, fuzzy diff --git a/tde-i18n-gl/messages/tdelibs/tdelibs.po b/tde-i18n-gl/messages/tdelibs/tdelibs.po index 60c51a0ad91..88ce6e90b02 100644 --- a/tde-i18n-gl/messages/tdelibs/tdelibs.po +++ b/tde-i18n-gl/messages/tdelibs/tdelibs.po @@ -608,7 +608,7 @@ msgstr "Omitir tódalas palabras en &maiúsculas" #, no-c-format msgid "" "If checked, words that consist of only uppercase letters are not spell checked. " -"This is useful if you have a lot of acronyms, such as KDE for example." +"This is useful if you have a lot of acronyms, such as TDE for example." msgstr "" #. i18n: file ./kspell2/ui/configui.ui line 67 @@ -686,8 +686,8 @@ msgstr "Procura recursiva por dominios" #. i18n: file ./dnssd/kcm_kdnssd.kcfg line 19 #: rc.cpp:455 #, no-c-format -msgid "Removed in KDE 3.5.0" -msgstr "Borrado en KDE 3.5.0" +msgid "Removed in TDE 3.5.0" +msgstr "Borrado en TDE 3.5.0" #. i18n: file ./dnssd/kcm_kdnssd.kcfg line 25 #: rc.cpp:458 @@ -1625,8 +1625,8 @@ msgid "Unable find script \"%1\"." msgstr "Imposíbel atopar un guiñon para \"%1\"." #: interfaces/kscript/scriptloader.cpp:40 -msgid "KDE Scripts" -msgstr "Guións de KDE" +msgid "TDE Scripts" +msgstr "Guións de TDE" #: arts/kde/kvideowidget.cpp:82 msgid "Video Toolbar" @@ -2431,16 +2431,16 @@ msgstr "O elemento do menú '%1' non se puido destacar." #: kded/kde-menu.cpp:111 msgid "" -"KDE Menu query tool.\n" +"TDE Menu query tool.\n" "This tool can be used to find in which menu a specific application is shown.\n" "The --highlight option can be used to visually indicate to the user where\n" -"in the KDE menu a specific application is located." +"in the TDE menu a specific application is located." msgstr "" -"Ferramenta de localización no Menú de KDE.\n" +"Ferramenta de localización no Menú de TDE.\n" "Esta ferramenta pódese empregar para atopar en qué menú se amosa unha " "aplicación específica.\n" "A opción --highlight pode empregarse para indicar ó usuario visualmente onde\n" -"se localiza a aplicación no menú de KDE." +"se localiza a aplicación no menú de TDE." #: kded/kde-menu.cpp:116 msgid "kde-menu" @@ -2497,21 +2497,21 @@ msgid "KDontChangeTheHostName" msgstr "KDontChangeTheHostName" #: kded/khostname.cpp:360 -msgid "Informs KDE about a change in hostname" -msgstr "Informa a KDE acerca dun cambio no nome da máquina" +msgid "Informs TDE about a change in hostname" +msgstr "Informa a TDE acerca dun cambio no nome da máquina" #: kded/kded.cpp:720 msgid "Check Sycoca database only once" msgstr "Comprobar a base de datos Sycoca só unha vez" #: kded/kded.cpp:860 -msgid "KDE Daemon" -msgstr "Daemon de KDE" +msgid "TDE Daemon" +msgstr "Daemon de TDE" #: kded/kded.cpp:862 -msgid "KDE Daemon - triggers Sycoca database updates when needed" +msgid "TDE Daemon - triggers Sycoca database updates when needed" msgstr "" -"Daemon KDE - provoca as actualizacións da base de datos Sycoca cando se precisa" +"Daemon TDE - provoca as actualizacións da base de datos Sycoca cando se precisa" #: kded/kbuildsycoca.cpp:483 msgid "" @@ -2576,16 +2576,16 @@ msgid "Rebuilds the system configuration cache." msgstr "Reconstrúe a caché da configuración do sistema." #: kded/kbuildsycoca.cpp:750 -msgid "Reloading KDE configuration, please wait..." -msgstr "Recargando a configuración de KDE, por favor, agarde..." +msgid "Reloading TDE configuration, please wait..." +msgstr "Recargando a configuración de TDE, por favor, agarde..." #: kded/kbuildsycoca.cpp:751 -msgid "KDE Configuration Manager" -msgstr "Xestor de Configuración de KDE" +msgid "TDE Configuration Manager" +msgstr "Xestor de Configuración de TDE" #: kded/kbuildsycoca.cpp:753 -msgid "Do you want to reload KDE configuration?" -msgstr "Quere cargar de novo a configuración de KDE?" +msgid "Do you want to reload TDE configuration?" +msgstr "Quere cargar de novo a configuración de TDE?" #: kded/kbuildsycoca.cpp:753 msgid "Do Not Reload" @@ -2771,8 +2771,8 @@ msgid "The library %1 does not offer an %2 function." msgstr "A libraría %1 non ofrece unha función %2." #: tdecore/klibloader.cpp:168 -msgid "The library %1 does not offer a KDE compatible factory." -msgstr "A libraría %1 non ofrece unha factoría KDE compatíbel." +msgid "The library %1 does not offer a TDE compatible factory." +msgstr "A libraría %1 non ofrece unha factoría TDE compatíbel." #: tdecore/klibloader.cpp:425 msgid "Library files for \"%1\" not found in paths." @@ -2788,12 +2788,12 @@ msgstr "LTR" #: tdecore/kapplication.cpp:1404 #, fuzzy msgid "" -"There was an error setting up inter-process communications for KDE. The message " +"There was an error setting up inter-process communications for TDE. The message " "returned by the system was:\n" "\n" msgstr "" "Houbo algún erro inicializando as comunicacións\n" -"entre procesos de KDE. A mensaxe devolta polo\n" +"entre procesos de TDE. A mensaxe devolta polo\n" "sistema foi:\n" "\n" @@ -2983,11 +2983,11 @@ msgstr "Non se puido lanzar o Centro de Axuda" #: tdecore/kapplication.cpp:2245 tdecore/kapplication.cpp:2280 #, c-format msgid "" -"Could not launch the KDE Help Center:\n" +"Could not launch the TDE Help Center:\n" "\n" "%1" msgstr "" -"Non se puido lanzar o Centro de Axuda de KDE:\n" +"Non se puido lanzar o Centro de Axuda de TDE:\n" "\n" "%1" @@ -4234,14 +4234,14 @@ msgstr "Adar II" #, fuzzy msgid "" "_: replace this with information about your translation team\n" -"

    KDE is translated into many languages thanks to the work of the translation " +"

    TDE is translated into many languages thanks to the work of the translation " "teams all over the world.

    " -"

    For more information on KDE internationalization visit For more information on TDE internationalization visit http://l10n.kde.org

    " msgstr "" -"

    KDE tradúcese a moitas linguas gracias ó traballo dos equipos de traducción " +"

    TDE tradúcese a moitas linguas gracias ó traballo dos equipos de traducción " "de todo o mundo.

    " -"

    Para máis información sobre a internacionalización de KDE visite " +"

    Para máis información sobre a internacionalización de TDE visite " "http://i18n.kde.org ou http://www.trasno.net/kde/

    " #: tdecore/kaboutdata.cpp:444 @@ -4322,8 +4322,8 @@ msgid "Code generation options file" msgstr "Ficheiro de opcións da xeración de código" #: tdecore/kconfig_compiler/kconfig_compiler.cpp:955 -msgid "KDE .kcfg compiler" -msgstr "Compilador .kcfg de KDE" +msgid "TDE .kcfg compiler" +msgstr "Compilador .kcfg de TDE" #: tdecore/kconfig_compiler/kconfig_compiler.cpp:956 msgid "KConfig Compiler" @@ -5488,30 +5488,30 @@ msgstr "Lista Desplegábel && Automático" #: tdeui/kaboutkde.cpp:34 #, fuzzy msgid "" -"The K Desktop Environment is written and maintained by the KDE Team, a " +"The K Desktop Environment is written and maintained by the TDE Team, a " "world-wide network of software engineers committed to Free Software " "development." "
    " -"
    No single group, company or organization controls the KDE source code. " -"Everyone is welcome to contribute to KDE." +"
    No single group, company or organization controls the TDE source code. " +"Everyone is welcome to contribute to TDE." "
    " "
    Visit http://www.kde.org " -"for more information on the KDE project. " +"for more information on the TDE project. " msgstr "" -"O Ambiente de Escritorio KDE está escrito e mantido polo Equipo KDE, " +"O Ambiente de Escritorio TDE está escrito e mantido polo Equipo TDE, " "unha rede mundial de enxeñeiros de software comprometidos co desenvolvemento de " "software libre." "
    " -"
    O código fonte de KDE non está controlado por un único grupo, compañía ou " -"organización. Calquera é benvido a colaborar con KDE." +"
    O código fonte de TDE non está controlado por un único grupo, compañía ou " +"organización. Calquera é benvido a colaborar con TDE." "
    " "
    Visite http://www.kde.org/ " -"para máis información sobre o Proxecto KDE." +"para máis información sobre o Proxecto TDE." #: tdeui/kaboutkde.cpp:43 msgid "" -"Software can always be improved, and the KDE Team is ready to do so. However, " +"Software can always be improved, and the TDE Team is ready to do so. However, " "you - the user - must tell us when something does not work as expected or could " "be done better." "
    " @@ -5523,11 +5523,11 @@ msgid "" "bug tracking system to register your wish. Make sure you use the severity " "called \"Wishlist\"." msgstr "" -"O software sempre pode ser mellorado, e o Equipo KDE está preparado para " +"O software sempre pode ser mellorado, e o Equipo TDE está preparado para " "facelo. Nembargantes, vostede - o usuario - ten que informarmos se algo non " "funciona como debería, ou podería facerse mellor." "
    " -"
    O Entorno de Escritorio KDE ten un sistema de seguemento de erros. Visite " +"
    O Entorno de Escritorio TDE ten un sistema de seguemento de erros. Visite " "http://bugs.kde.org/ " "ou use o diálogo \"Informar dun Erro\" do menú \"Axuda\" para comunicar erros." "
    " @@ -5537,7 +5537,7 @@ msgstr "" #: tdeui/kaboutkde.cpp:54 msgid "" -"You do not have to be a software developer to be a member of the KDE team. You " +"You do not have to be a software developer to be a member of the TDE team. You " "can join the national teams that translate program interfaces. You can provide " "graphics, themes, sounds, and improved documentation. You decide!" "
    " @@ -5548,7 +5548,7 @@ msgid "" "HREF=\"http://developer.kde.org/\">http://developer.kde.org " "will provide you with what you need." msgstr "" -"Non ten que ser un desenvolvedor de software para ser membro do Equipo KDE. " +"Non ten que ser un desenvolvedor de software para ser membro do Equipo TDE. " "Pode unirse ós equipos nacionais para traduci-las interfaces dos programas. " "Pode fornecer gráficos, temas, sons, e documentación mellorada. ¡Vostede " "decide!" @@ -5563,32 +5563,32 @@ msgstr "" #: tdeui/kaboutkde.cpp:67 msgid "" -"KDE is available free of charge, but making it is not free." +"TDE is available free of charge, but making it is not free." "
    " -"
    Thus, the KDE team formed the KDE e.V., a non-profit organization legally " -"founded in Tuebingen, Germany. The KDE e.V. represents the KDE project in legal " +"
    Thus, the TDE team formed the TDE e.V., a non-profit organization legally " +"founded in Tuebingen, Germany. The TDE e.V. represents the TDE project in legal " "and financial matters. See " -"http://www.kde-ev.org for information on the KDE e.V." +"http://www.kde-ev.org for information on the TDE e.V." "
    " -"
    The KDE team does need financial support. Most of the money is used to " +"
    The TDE team does need financial support. Most of the money is used to " "reimburse members and others on expenses they experienced when contributing to " -"KDE. You are encouraged to support KDE through a financial donation, using one " +"TDE. You are encouraged to support TDE through a financial donation, using one " "of the ways described at " "http://www.kde.org/support/." "
    " "
    Thank you very much in advance for your support." msgstr "" -"KDE está dispoñíbel gratuitamente, pero facelo costa moito traballo. " +"TDE está dispoñíbel gratuitamente, pero facelo costa moito traballo. " "
    " -"
    Neste aspecto, o equipo de KDE creou a Asociación KDE, unha organización " -"sen ánimo de lucro fundada en Tuebingen, Xermania. A Asociación KDE representa " -"ó proxecto KDE en asuntos legais e financieiros. Vexa Neste aspecto, o equipo de TDE creou a Asociación TDE, unha organización " +"sen ánimo de lucro fundada en Tuebingen, Xermania. A Asociación TDE representa " +"ó proxecto TDE en asuntos legais e financieiros. Vexa http://www.kde-ev.org/ " -"para información sobre a Asociación KDE. " +"para información sobre a Asociación TDE. " "
    " -"
    O Equipo de KDE precisa axuda financieira. A maior parte do diñeiro " +"
    O Equipo de TDE precisa axuda financieira. A maior parte do diñeiro " "emprégase para compensar ós seus membros e outros polos gastos derivados da súa " -"contribución a KDE. Pode ofrecer axuda a KDE a través dunha doación económica, " +"contribución a TDE. Pode ofrecer axuda a TDE a través dunha doación económica, " "empregando algúns dos xeitos descritos en http://www.kde.org/support/. " "
    " @@ -5597,25 +5597,25 @@ msgstr "" #: tdeui/kaboutkde.cpp:81 #, c-format msgid "K Desktop Environment. Release %1" -msgstr "Entorno de Escritorio KDE. Versión %1" +msgstr "Entorno de Escritorio TDE. Versión %1" #: tdeui/kaboutkde.cpp:83 msgid "" -"_: About KDE\n" +"_: About TDE\n" "&About" -msgstr "Acerca de &KDE" +msgstr "Acerca de &TDE" #: tdeui/kaboutkde.cpp:84 msgid "&Report Bugs or Wishes" msgstr "&Informar de Erros ou Enviar Suxerencias" #: tdeui/kaboutkde.cpp:85 -msgid "&Join the KDE Team" -msgstr "&Unirse ó equipo de KDE" +msgid "&Join the TDE Team" +msgstr "&Unirse ó equipo de TDE" #: tdeui/kaboutkde.cpp:86 -msgid "&Support KDE" -msgstr "&Axudar a KDE" +msgid "&Support TDE" +msgstr "&Axudar a TDE" #: tdeui/kstdguiitem.cpp:110 khtml/java/kjavaappletserver.cpp:804 msgid "&Yes" @@ -6526,8 +6526,8 @@ msgid "&About %1" msgstr "&Acerca de %1" #: tdeui/khelpmenu.cpp:176 tdeui/kstdaction_p.h:114 -msgid "About &KDE" -msgstr "Acerca de &KDE" +msgid "About &TDE" +msgstr "Acerca de &TDE" #: tdeui/kactionclasses.cpp:2072 msgid "Exit F&ull Screen Mode" @@ -6654,8 +6654,8 @@ msgid "Task" msgstr "Tarefa" #: tdeui/kaboutdialog.cpp:704 -msgid "%1 %2 (Using KDE %3)" -msgstr "%1 %2 (Usando KDE %3)" +msgid "%1 %2 (Using TDE %3)" +msgstr "%1 %2 (Usando TDE %3)" #: tdeui/kaboutdialog.cpp:706 msgid "%1 %2, %3" @@ -7386,8 +7386,8 @@ msgstr "" "formulario. O adxunto borrouse para a súa protección." #: khtml/khtml_part.cpp:4870 -msgid "KDE" -msgstr "KDE" +msgid "TDE" +msgstr "TDE" #: khtml/khtml_part.cpp:5776 msgid "(%1/s)" @@ -7788,8 +7788,8 @@ msgid "Archives" msgstr "Ficheiros" #: khtml/java/kjavaappletviewer.cpp:451 -msgid "KDE Java Applet Plugin" -msgstr "Plugin Applet de Java para KDE" +msgid "TDE Java Applet Plugin" +msgstr "Plugin Applet de Java para TDE" #: khtml/java/kjavaapplet.cpp:225 msgid "Initializing Applet \"%1\"..." @@ -7979,8 +7979,8 @@ msgstr "" "klauncher: Iníciase automáticamente por tdeinit.\n" #: kinit/klauncher.cpp:743 -msgid "KDEInit could not launch '%1'." -msgstr "KDEInit non puido executar '%1'." +msgid "TDEInit could not launch '%1'." +msgstr "TDEInit non puido executar '%1'." #: kinit/klauncher.cpp:918 kinit/klauncher.cpp:943 kinit/klauncher.cpp:960 msgid "Could not find service '%1'." @@ -8028,8 +8028,8 @@ msgid "KConf Update" msgstr "Anovación KConf" #: kconf_update/kconf_update.cpp:945 -msgid "KDE Tool for updating user configuration files" -msgstr "Ferramenta de KDE para anova-los ficheiros de configuración de usuario" +msgid "TDE Tool for updating user configuration files" +msgstr "Ferramenta de TDE para anova-los ficheiros de configuración de usuario" #: kspell2/ui/configdialog.cpp:38 msgid "KSpell2 Configuration" @@ -8064,13 +8064,13 @@ msgid "Web style plugin" msgstr "Plugin de estilo web" #: kstyles/klegacy/plugin.cpp:28 -msgid "KDE LegacyStyle plugin" -msgstr "Plugin de estilo antigo de KDE" +msgid "TDE LegacyStyle plugin" +msgstr "Plugin de estilo antigo de TDE" #: kstyles/utils/installtheme/main.cpp:35 -msgid "KDE Tool to build a cache list of all pixmap themes installed" +msgid "TDE Tool to build a cache list of all pixmap themes installed" msgstr "" -"Ferramenta de KDE para construir unha lista de caché de tódolos temas pixmap " +"Ferramenta de TDE para construir unha lista de caché de tódolos temas pixmap " "instalados" #: kstyles/utils/installtheme/main.cpp:40 @@ -8403,7 +8403,7 @@ msgstr "Non se puido engadir a nova entrada." #: kutils/kcmoduleloader.cpp:171 #, fuzzy msgid "The module %1 is not a valid configuration module." -msgstr "Módulo de configuración dos Recursos de KDE" +msgstr "Módulo de configuración dos Recursos de TDE" #: kutils/kcmoduleloader.cpp:172 msgid "" @@ -8423,7 +8423,7 @@ msgid "" "
    %1" "

    Possible reasons:

    " "
      " -"
    • An error occurred during your last KDE upgrade leaving an orphaned control " +"
    • An error occurred during your last TDE upgrade leaving an orphaned control " "module" "
    • You have old third party modules lying around.
    " "

    Check these points carefully and try to remove the module mentioned in the " @@ -8435,7 +8435,7 @@ msgstr "" "
    %1 " "

    Posibeis racións:

    " "
      " -"
    • Ocorreu un erro durante a súa derradeira actualización de KDE, deixando un " +"
    • Ocorreu un erro durante a súa derradeira actualización de TDE, deixando un " "módulo de control orfo " "
    • Ten módulos de terceiros antigos aínda presentes.
    " "

    Comprobe estes puntos con coidado e tente borra-lo módulo mencionado na " @@ -8619,8 +8619,8 @@ msgid "kcmkresources" msgstr "kcmkresources" #: kresources/kcmkresources.cpp:45 -msgid "KDE Resources configuration module" -msgstr "Módulo de configuración dos Recursos de KDE" +msgid "TDE Resources configuration module" +msgstr "Módulo de configuración dos Recursos de TDE" #: kresources/kcmkresources.cpp:47 msgid "(c) 2003 Tobias Koenig" @@ -8802,7 +8802,7 @@ msgstr "Memoria Esgotada" msgid "" "Your local kab configuration file \"%1\" could not be created. kab will " "probably not work correctly without it.\n" -"Make sure you have not removed write permission from your local KDE directory " +"Make sure you have not removed write permission from your local TDE directory " "(usually ~/.kde)." msgstr "" "O ficheiro de configuración local do kab\n" @@ -8816,7 +8816,7 @@ msgstr "" msgid "" "Your standard kab database file \"%1\" could not be created. kab will probably " "not work correctly without it.\n" -"Make sure you have not removed write permission from your local KDE directory " +"Make sure you have not removed write permission from your local TDE directory " "(usually ~/.kde)." msgstr "" "O ficheiro de base de datos estándar de kab\n" @@ -9132,8 +9132,8 @@ msgid "Import &All" msgstr "Importar T&odos" #: kcert/kcertpart.cc:183 kcert/kcertpart.cc:274 kcert/kcertpart.cc:359 -msgid "KDE Secure Certificate Import" -msgstr "Importación Segura de Certificados de KDE" +msgid "TDE Secure Certificate Import" +msgstr "Importación Segura de Certificados de TDE" #: kcert/kcertpart.cc:184 msgid "Chain:" @@ -9224,8 +9224,8 @@ msgid "Certificate Import" msgstr "Importación de Certificado" #: kcert/kcertpart.cc:455 -msgid "You do not seem to have compiled KDE with SSL support." -msgstr "Non semella ter compilado KDE con soporte SSL." +msgid "You do not seem to have compiled TDE with SSL support." +msgstr "Non semella ter compilado TDE con soporte SSL." #: kcert/kcertpart.cc:460 msgid "Certificate file is empty." @@ -9267,23 +9267,23 @@ msgstr "" #: kcert/kcertpart.cc:741 kcert/kcertpart.cc:759 msgid "" -"Certificate has been successfully imported into KDE.\n" -"You can manage your certificate settings from the KDE Control Center." +"Certificate has been successfully imported into TDE.\n" +"You can manage your certificate settings from the TDE Control Center." msgstr "" -"Importouse correctamente o certificado a KDE.\n" -"Pode xestiona-las súas opcións de certificado dende o Centro de Control de KDE." +"Importouse correctamente o certificado a TDE.\n" +"Pode xestiona-las súas opcións de certificado dende o Centro de Control de TDE." #: kcert/kcertpart.cc:873 msgid "" -"Certificates have been successfully imported into KDE.\n" -"You can manage your certificate settings from the KDE Control Center." +"Certificates have been successfully imported into TDE.\n" +"You can manage your certificate settings from the TDE Control Center." msgstr "" -"Importáronse correctamente os certificados a KDE.\n" -"Pode xestiona-las súas opcións de certificado dende o Centro de Control de KDE." +"Importáronse correctamente os certificados a TDE.\n" +"Pode xestiona-las súas opcións de certificado dende o Centro de Control de TDE." #: kcert/kcertpart.cc:879 -msgid "KDE Certificate Part" -msgstr "Parte de Certificados de KDE" +msgid "TDE Certificate Part" +msgstr "Parte de Certificados de TDE" #: khtml/khtml_settings.cc:152 msgid "Accept" @@ -9470,11 +9470,11 @@ msgid "expand ${prefix} and ${exec_prefix} in output" msgstr "" #: tdecore/tde-config.cpp.in:19 -msgid "Compiled in prefix for KDE libraries" +msgid "Compiled in prefix for TDE libraries" msgstr "" #: tdecore/tde-config.cpp.in:20 -msgid "Compiled in exec_prefix for KDE libraries" +msgid "Compiled in exec_prefix for TDE libraries" msgstr "" #: tdecore/tde-config.cpp.in:21 @@ -9486,12 +9486,12 @@ msgid "Prefix in $HOME used to write files" msgstr "" #: tdecore/tde-config.cpp.in:23 -msgid "Compiled in version string for KDE libraries" +msgid "Compiled in version string for TDE libraries" msgstr "" #: tdecore/tde-config.cpp.in:24 #, fuzzy -msgid "Available KDE resource types" +msgid "Available TDE resource types" msgstr "Enderezos dispoñíbeis:" #: tdecore/tde-config.cpp.in:25 diff --git a/tde-i18n-gl/messages/tdelibs/tdeprint.po b/tde-i18n-gl/messages/tdelibs/tdeprint.po index 6ce11262bef..4877e08dcc7 100644 --- a/tde-i18n-gl/messages/tdelibs/tdeprint.po +++ b/tde-i18n-gl/messages/tdelibs/tdeprint.po @@ -547,13 +547,13 @@ msgstr "" msgid "" " Printer Selection Menu: " "

    Use this combo box to select the printer to which you want to print. " -"Initially (if you run KDEPrint for the first time), you may only find the " -"KDE special printers (which save jobs to disk [as PostScript- or " +"Initially (if you run TDEPrint for the first time), you may only find the " +"TDE special printers (which save jobs to disk [as PostScript- or " "PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " "a real printer, you need to... " "

      " "
    • ...either create a local printer with the help of the " -"KDE Add Printer Wizard. The Wizard is available for the CUPS and RLPR " +"TDE Add Printer Wizard. The Wizard is available for the CUPS and RLPR " "printing systems (click button to the left of the 'Properties' " "button),
      • " "
    • ...or try to connect to an existing remote CUPS print server. You can " @@ -561,7 +561,7 @@ msgid "" "opens: click on the 'CUPS server' icon: Fill in the information " "required to use the remote server.
    " "

    Note: It may happen that you successfully connected to a remote CUPS " -"server and still do not get a printer list. If this happens: force KDEPrint to " +"server and still do not get a printer list. If this happens: force TDEPrint to " "re-load its configuration files. To reload the configuration files, either " "start kprinter again, or use the switch the print system away from CUPS and " "back again once. The print system switch can be made through a selection in " @@ -585,7 +585,7 @@ msgid "" "

    To create a personal 'selective view list', click on the " "'System Options' button at the bottom of this dialog. Then, in the new " "dialog, select 'Filter' (left column in the " -"KDE Print Configuration dialog) and setup your selection..

    " +"TDE Print Configuration dialog) and setup your selection..

    " "

    Warning: Clicking this button without prior creation of a personal " "'selective view list' will make all printers dissappear from the " "view. (To re-enable all printers, just click this button again.)

    " @@ -593,11 +593,11 @@ msgstr "" #: kprintdialog.cpp:154 msgid "" -"KDE Add Printer Wizard " -"

    This button starts the KDE Add Printer Wizard.

    " +"TDE Add Printer Wizard " +"

    This button starts the TDE Add Printer Wizard.

    " "

    Use the Wizard (with \"CUPS\" or \"RLPR\"" ") to add locally defined printers to your system.

    " -"

    Note: The KDE Add Printer Wizard does not " +"

    Note: The TDE Add Printer Wizard does not " "work, and this button is disabled if you use \"Generic LPD\", " "\"LPRng\", or \"Print Through an External Program\".)

    " msgstr "" @@ -622,17 +622,17 @@ msgid "" "

    This button starts a new dialog where you can adjust various settings of " "your printing system. Amongst them: " "

      " -"
    • Should KDE applications embed all fonts into the PostScript they generate " +"
    • Should TDE applications embed all fonts into the PostScript they generate " "for printing? " -"
    • Should KDE use an external PostScript viewer like gv " +"
    • Should TDE use an external PostScript viewer like gv " "for print page previews? " -"
    • Should KDEPrint use a local or a remote CUPS server?,
    " +"
  • Should TDEPrint use a local or a remote CUPS server?, " "and many more.... " msgstr "" #: kprintdialog.cpp:182 msgid "" -" Help: This button takes you to the complete KDEPrint Manual" +" Help: This button takes you to the complete TDEPrint Manual" ". " msgstr "" @@ -645,7 +645,7 @@ msgstr "" #: kprintdialog.cpp:190 msgid "" " Print: This button sends the job to the printing process. If you " -"are sending non-PostScript files, you may be asked if you want KDE to convert " +"are sending non-PostScript files, you may be asked if you want TDE to convert " "the files into PostScript, or if you want your print subsystem (like CUPS) to " "do this. " msgstr "" @@ -665,7 +665,7 @@ msgstr "" msgid "" " Output File Name and Path: The \"Output file:\" shows you where " "your file will be saved if you decide to \"Print to File\" your job, using one " -"of the KDE Special Printers named \"Print to File (PostScript)\" or " +"of the TDE Special Printers named \"Print to File (PostScript)\" or " "\"Print to File (PDF)\". Choose a name and location that suits your need by " "using the button and/or editing the line on the right. " msgstr "" @@ -703,9 +703,9 @@ msgid "" "\"poster\" or \"pamphlet\" layout looks like you expected, without wasting " "paper first. It also lets you cancel the job if something looks wrong. " "

    Note: The preview feature (and therefore this checkbox) is only " -"visible for printjobs created from inside KDE applications. If you start " +"visible for printjobs created from inside TDE applications. If you start " "kprinter from the commandline, or if you use kprinter as a print command for " -"non-KDE applications (like Acrobat Reader, Firefox or OpenOffice), print " +"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " "preview is not available here. " msgstr "" @@ -867,7 +867,7 @@ msgid "" "secretaries who serve different bosses, etc.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-billing=...         # example: \"Marketing_Department\" or "
 "\"Joe_Doe\"

    " @@ -891,7 +891,7 @@ msgid "" "trays).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-hold-until=...      # example: \"indefinite\" or \"no-hold\"  "
 "

    " @@ -906,7 +906,7 @@ msgid "" "

    They contain any string you type into the line edit field.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-label=\"...\"      # example: \"Company Confidential\"
    " "

    " @@ -928,7 +928,7 @@ msgid "" "no other, higher prioritized one is present).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-priority=...   # example: \"10\" or \"66\" or \"99\"
    " "

    " @@ -1381,7 +1381,7 @@ msgid "" "

    The default value is 10, meaning that the font is scaled in a way that 10 " "characters per inch will be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o cpi=...          # example: \"8\" or \"12\"

    " msgstr "" @@ -1395,7 +1395,7 @@ msgid "" "

    The default value is 6, meaning that the font is scaled in a way that 6 " "lines per inch will be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o lpi=...         # example \"5\" or \"7\"

    " msgstr "" @@ -1409,7 +1409,7 @@ msgid "" "

    The default value is 1, meaning that only one column of text per page will " "be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o columns=...     # example: \"2\" or \"4\"

    " msgstr "" @@ -1425,11 +1425,11 @@ msgid "" "

    These settings control the appearance of text on printouts. They are only " "valid for printing text files or input directly through kprinter.

    " "

    Note: These settings have no effect whatsoever for other input " -"formats than text, or for printing from applications such as the KDE Advanced " +"formats than text, or for printing from applications such as the TDE Advanced " "Text Editor. (Applications in general send PostScript to the print system, and " "'kate' in particular has its own knobs to control the print output.

    . " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

         -o cpi=...         # example: \"8\" or \"12\"  "
 "
         -o lpi=...         # example: \"5\" or \"7\"  "
@@ -1442,9 +1442,9 @@ msgid ""
 "
    Margins
      "
 "
    These settings control the margins of printouts on the paper. They are not "
 "valid for  jobs originating from applications which define their own page "
-"layout internally and  send PostScript to KDEPrint (such as KOffice or "
+"layout internally and  send PostScript to TDEPrint (such as KOffice or "
 "OpenOffice.org). 
      "
-"
    When printing from KDE applications, such as KMail and Konqueror, or "
+"
    When printing from TDE applications, such as KMail and Konqueror, or "
 "printing an ASCII text  file through kprinter, you can choose your preferred "
 "margin settings here. 
      "
 "
    Margins may be set individually for each edge of the paper. The combo box at "
@@ -1453,7 +1453,7 @@ msgid ""
 "
    You can even use the mouse to grab one margin and drag it to the intended "
 "position (see the  preview picture on the right side). 
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o page-top=...      # example: \"72\"  "
 "
         -o page-bottom=...   # example: \"24\"  "
@@ -1474,7 +1474,7 @@ msgid ""
 "enscript      pre-filter on the Filters tab. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o prettyprint=true.  
     
      "
 msgstr ""
@@ -1488,7 +1488,7 @@ msgid ""
 "margins, though.) 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o prettyprint=false  
     
      "
 msgstr ""
@@ -1506,7 +1506,7 @@ msgid ""
 "enscript      pre-filter on the Filters tab. 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o prettyprint=true.  "
 "
         -o prettyprint=false  
     
      "
@@ -1581,7 +1581,7 @@ msgid ""
 "server via this editable list.  There are 3 purposes for this: "
 "
       "
 "
    • Use any current or future standard CUPS job option not supported by the  "
-"KDEPrint GUI. 
      •  "
+"TDEPrint GUI.  "
 "
    • Control any custom job option you may want to support in custom CUPS "
 "filters  and backends plugged into the CUPS filtering chain.
      •   "
 "
    • Send short messages to the operators of your production printers in your  "
@@ -1615,7 +1615,7 @@ msgid ""
 "
      Note: the fields must not include spaces, tabs or quotes. You may "
 "need to  double-click on a field to edit it. "
 "
      Warning: Do not use such standard CUPS option names which also can be "
-"used  through the KDEPrint GUI. Results may be  unpredictable if they conflict, "
+"used  through the TDEPrint GUI. Results may be  unpredictable if they conflict, "
 " or if they are sent multiple times. For all options supported by the GUI, "
 "please do use  the GUI. (Each GUI element's  'WhatsThis' names the related CUPS "
 "option name.) 
        "
@@ -1818,7 +1818,7 @@ msgid ""
 "colors defined in the HP-GL/2 reference manual from Hewlett Packard. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o blackplot=true  
        
        "
 msgstr ""
@@ -1838,7 +1838,7 @@ msgid ""
 "the HP-GL  to PostScript assumes the plot is ANSI E size. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:  "
 "
           -o fitplot=true   
       
        "
 msgstr ""
@@ -1855,7 +1855,7 @@ msgid ""
 "set inside  the plot file itself..
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:  "
 "
          -o penwidth=...   # example: \"2000\" or \"500\"  
       
        "
 msgstr ""
@@ -1863,11 +1863,11 @@ msgstr ""
 #: cups/kphpgl2page.cpp:85
 msgid ""
 "   HP-GL Print Options  "
-"
      All options on this page are only applicable if you use KDEPrint to send "
+"
      All options on this page are only applicable if you use TDEPrint to send "
 "HP-GL and  HP-GL/2 files to one of your printers. 
        "
 "
      HP-GL and HP-GL/2 are page description languages developed by "
 "Hewlett-Packard to drive  Pen Plotting devices. 
        "
-"
      KDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
+"
      TDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
 "it  on any installed printer. 
        "
 "
      Note 1: To print HP-GL files, start 'kprinter' and simply load the "
 "file into  the running kprinter.
       "
@@ -1876,7 +1876,7 @@ msgid ""
 "1.1.22).
        "
 "
        "
 "
        "
-"
      Additional hint for power users: These KDEPrint GUI elements "
+"
      Additional hint for power users: These TDEPrint GUI elements "
 "match with CUPS commandline job option parameters:  "
 "
           -o blackplot=...  # examples: \"true\" or \"false\"  "
 "
           -o fitplot=...    # examples: \"true\" or \"false\"  "
@@ -2135,7 +2135,7 @@ msgid ""
 "lighten the print. Values less than 100 will darken the print. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o brightness=...      # use range from \"0\" to \"200\"  
        
        "
 ""
@@ -2179,7 +2179,7 @@ msgid ""
 "Light-navy-blue       "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o hue=...     # use range from \"-360\" to \"360\"  
       
        "
 msgstr ""
@@ -2197,7 +2197,7 @@ msgid ""
 "make the colors extremely intense. 
       "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o saturation=...      # use range from \"0\" to \"200\"  
       
        "
 ""
@@ -2214,7 +2214,7 @@ msgid ""
 "preview. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o gamma=...      # use range from \"1\" to \"3000\"  
       
        "
 ""
@@ -2285,7 +2285,7 @@ msgid ""
 "printed.  Scaling in % of natural image size defaults to 100 %.  
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o natural-scaling=...     # range in  %  is 1....800  "
 "
         -o scaling=...             # range in  %  is 1....800  "
@@ -2333,7 +2333,7 @@ msgid ""
 "paper printout. Default  is 'center'. 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o position=...       # examples: \"top-left\" or \"bottom\"  
     "
 "
      "
@@ -3283,9 +3283,9 @@ msgstr "Previsualización"
 
 #: management/kmconfigpreview.cpp:44
 msgid ""
-"You can use an external preview program (PS viewer) instead of the KDE built-in "
-"preview system. Note that if the KDE default PS viewer (KGhostView) cannot be "
-"found, KDE tries automatically to find another external PostScript viewer"
+"You can use an external preview program (PS viewer) instead of the TDE built-in "
+"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be "
+"found, TDE tries automatically to find another external PostScript viewer"
 msgstr ""
 
 #: management/kmwdrivertest.cpp:41
@@ -3354,7 +3354,7 @@ msgstr ""
 
 #: management/kaddprinterwizard.cpp:10
 #, fuzzy
-msgid "Configure KDE Print"
+msgid "Configure TDE Print"
 msgstr "Configura-lo selector de ficheiros"
 
 #: management/kaddprinterwizard.cpp:11
@@ -3386,7 +3386,7 @@ msgid ""
 msgstr ""
 
 #: management/kmdbcreator.cpp:113
-msgid "Please wait while KDE rebuilds a driver database."
+msgid "Please wait while TDE rebuilds a driver database."
 msgstr ""
 
 #: management/kmdbcreator.cpp:114
@@ -3470,7 +3470,7 @@ msgstr "Cambiar"
 
 #: management/kmconfigdialog.cpp:38
 #, fuzzy
-msgid "KDE Print Configuration"
+msgid "TDE Print Configuration"
 msgstr "¡Non se pode recarga-lo ficheiro de configuración!"
 
 #: management/kmwdriver.cpp:33
@@ -3646,7 +3646,7 @@ msgstr ""
 
 #: management/kmconfiggeneral.cpp:53
 msgid ""
-"This time setting controls the refresh rate of various KDE Print "
+"This time setting controls the refresh rate of various TDE Print "
 "components like the print manager and the job viewer."
 msgstr ""
 
@@ -3806,7 +3806,7 @@ msgstr ""
 
 #: management/kmconfigfonts.cpp:89
 msgid ""
-"When using font embedding you can select additional directories where KDE "
+"When using font embedding you can select additional directories where TDE "
 "should search for embeddable font files. By default, the X server font path is "
 "used, so adding those directories is not needed. The default search path should "
 "be sufficient in most cases."
@@ -4202,7 +4202,7 @@ msgid ""
 "
    "
 "
    We hope you'll enjoy this tool!
    "
 "
    "
-"The KDE printing team.
    "
+"The TDE printing team.
    "
 msgstr ""
 
 #: management/kmdriverdbwidget.cpp:51
@@ -4687,7 +4687,7 @@ msgid ""
 "  File Open button "
 "
    This button tries to open the highlighted file, so you can view or edit it "
 "before you send it to the printing system.
     "
-"
    If you open files, KDEPrint will use the application matching the MIME type "
+"
    If you open files, TDEPrint will use the application matching the MIME type "
 "of the file.
         "
 msgstr ""
 
@@ -4696,7 +4696,7 @@ msgid ""
 "  File List view "
 "
    This list displays all the files you selected for printing. You can see the "
 "file name(s), file path(s) and the file (MIME) type(s) as determined by "
-"KDEPrint. You may re-arrange the  initial order of the list  with the help of "
+"TDEPrint. You may re-arrange the  initial order of the list  with the help of "
 "the arrow buttons on the right.
     "
 "
    The files will be printed as a single job, in the same order as displayed in "
 "the list.
     "
@@ -4704,7 +4704,7 @@ msgid ""
 "locations. The files may be of multiple MIME types. The buttons on the right "
 "side let you add more files, remove already selected files from the list,  "
 "re-order the list (by moving files up or down), and open files. If you open "
-"files, KDEPrint will use the application matching the MIME type of the file.
     "
+"files, TDEPrint will use the application matching the MIME type of the file.
     "
 "    "
 msgstr ""
 
@@ -4745,8 +4745,8 @@ msgstr ""
 msgid ""
 " Print Subsystem Selection "
 "
    This combo box shows (and lets you select) a print subsystem to be used by "
-"KDEPrint. (This print subsystem must, of course, be installed inside your "
-"Operating System.) KDEPrint usually auto-detects the correct print subsystem by "
+"TDEPrint. (This print subsystem must, of course, be installed inside your "
+"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
 "itself upon first startup. Most Linux distributions have \"CUPS\", the "
 "Common UNIX Printing System. "
 msgstr ""
@@ -4789,7 +4789,7 @@ msgid ""
 "
    Note. The number of available job options depends strongly on the "
 "actual  driver used for your print queue. 'Raw' "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.
          "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
      "
 msgstr ""
 
 #: driverview.cpp:71
@@ -4814,7 +4814,7 @@ msgid ""
 "
    Note. The number of available job options depends strongly on the "
 "actual  driver used for your print queue. 'Raw' "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.
      "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
      "
 msgstr ""
 
 #: kprinter.cpp:280
@@ -4872,7 +4872,7 @@ msgstr ""
 
 #: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661
 #, fuzzy, c-format
-msgid "Unable to load KDE print management library: %1"
+msgid "Unable to load TDE print management library: %1"
 msgstr "Seleccionar impresora"
 
 #: kmmanager.cpp:491 kxmlcommand.cpp:669
@@ -4902,8 +4902,8 @@ msgstr "Seleccionar impresora"
 
 #: kmspecialmanager.cpp:53
 msgid ""
-"A file share/tdeprint/specials.desktop was found in your local KDE directory. "
-"This file probably comes from a previous KDE release and should be removed in "
+"A file share/tdeprint/specials.desktop was found in your local TDE directory. "
+"This file probably comes from a previous TDE release and should be removed in "
 "order to manage global pseudo printers."
 msgstr ""
 
@@ -4934,7 +4934,7 @@ msgstr ""
 
 #: kprinterimpl.cpp:281
 msgid ""
-"The KDE print server (tdeprintd) could not be contacted. Check that this "
+"The TDE print server (tdeprintd) could not be contacted. Check that this "
 "server is running."
 msgstr ""
 
@@ -4973,7 +4973,7 @@ msgstr ""
 msgid ""
 "The MIME type %1 is not supported as input of the filter chain (this may happen "
 "with non-CUPS spoolers when performing page selection on a non-PostScript "
-"file). Do you want KDE to convert the file to a supported format?
    "
+"file). Do you want TDE to convert the file to a supported format?
    "
 msgstr ""
 
 #: kprinterimpl.cpp:389 kprinterimpl.cpp:509
@@ -5024,12 +5024,12 @@ msgid ""
 "The file format  %1  is not directly supported by the current "
 "print system. You now have 3 options: "
 "
       "
-"
    •  KDE can attempt to convert this file automatically to a supported format. "
+"
    •  TDE can attempt to convert this file automatically to a supported format. "
 "(Select Convert) 
      • "
 "
    •  You can try to send the file to the printer without any conversion. "
 "(Select Keep) 
      • "
 "
    •  You can cancel the printjob. (Select Cancel) 
     "
-"Do you want KDE to attempt and convert this file to %2?    "
+"Do you want TDE to attempt and convert this file to %2?"
 msgstr ""
 
 #: kprinterimpl.cpp:518
@@ -5127,7 +5127,7 @@ msgid ""
 "installed.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o PageSize=...         # examples: \"A4\" or \"Letter\"  
     
      "
 ""
@@ -5142,7 +5142,7 @@ msgid ""
 "installed. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o MediaType=...        # example: \"Transparency\"  
     
      "
 msgstr ""
@@ -5156,7 +5156,7 @@ msgid ""
 "installed. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
 "
     
      "
@@ -5178,7 +5178,7 @@ msgid ""
 "down.
    • The icon changes according to your selection.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o orientation-requested=...       # examples: \"landscape\" or "
 "\"reverse-portrait\"

    " @@ -5204,7 +5204,7 @@ msgid "" "if you turn it over the short edge. (Some printer drivers name this mode " "duplex-tumbled). " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
 "

    " @@ -5229,7 +5229,7 @@ msgid "" "

    CUPS comes with a selection of banner pages.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
 "

    " @@ -5250,7 +5250,7 @@ msgid "" "sheet in both places, your printout will not look as you intended.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o number-up=...        # examples: \"2\" or \"4\"

    " msgstr "" @@ -5377,7 +5377,7 @@ msgstr "" #: tdeprintd.cpp:176 msgid "" -"Some of the files to print are not readable by the KDE print daemon. This may " +"Some of the files to print are not readable by the TDE print daemon. This may " "happen if you are trying to print as a different user to the one currently " "logged in. To continue printing, you need to provide root's password." msgstr "" @@ -5424,9 +5424,9 @@ msgstr "" #: kpcopiespage.cpp:55 msgid "" " Current Page: Select \"Current\" " -"if you want to print the page currently visible in your KDE application.

    " -"

    Note: this field is disabled if you print from non-KDE applications " -"like Mozilla or OpenOffice.org, since here KDEPrint has no means to determine " +"if you want to print the page currently visible in your TDE application.

    " +"

    Note: this field is disabled if you print from non-TDE applications " +"like Mozilla or OpenOffice.org, since here TDEPrint has no means to determine " "which document page you are currently viewing.

    " msgstr "" @@ -5440,7 +5440,7 @@ msgid "" "document.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-ranges=...     # example: \"4,6,10-13,17,20,23-25\"
    " "

    " @@ -5464,7 +5464,7 @@ msgid "" "model).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-set=...        # example: \"odd\" or \"even\"

    " "    " @@ -5479,7 +5479,7 @@ msgid "" "

    The 'Copies' setting defaults to 1.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

         -o copies=...            # examples: \"5\" or \"42\"  "
 "
         -o outputorder=...       # example:  \"reverse\" "
@@ -5494,7 +5494,7 @@ msgid ""
 "and down arrows. You can also type the figure directly into the box. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o copies=...            # examples: \"5\" or \"42\"  
     
      "
 ""
@@ -5511,7 +5511,7 @@ msgid ""
 "3-3-3-...\".
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o Collate=...           # example:  \"true\" or \"false\"  
     
      "
 ""
@@ -5530,7 +5530,7 @@ msgid ""
 "checkbox at the same time. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o outputorder=...       # example:  \"reverse\"  
     
      "
 msgstr ""
@@ -5629,14 +5629,14 @@ msgstr ""
 
 #: kprintpreview.cpp:300
 msgid ""
-"Preview failed: neither the internal KDE PostScript viewer (KGhostView) nor any "
+"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any "
 "other external PostScript viewer could be found."
 msgstr ""
 
 #: kprintpreview.cpp:304
 #, c-format
 msgid ""
-"Preview failed: KDE could not find any application to preview files of type %1."
+"Preview failed: TDE could not find any application to preview files of type %1."
 msgstr ""
 
 #: kprintpreview.cpp:314
@@ -5701,7 +5701,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-top=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     
      "
@@ -5722,7 +5722,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5743,7 +5743,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-left=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5764,7 +5764,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-right=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5792,7 +5792,7 @@ msgid ""
 "The margin setting does not work if you load such files directly into  "
 "kprinter, which have their print margins hardcoded internally, like as most  "
 "PDF or PostScript files. It works for all ASCII text files however. It also may "
-"not  work with non-KDE applications which fail to  fully utilize the KDEPrint "
+"not  work with non-TDE applications which fail to  fully utilize the TDEPrint "
 "framework, such as OpenOffice.org. 
      "
 msgstr ""
 
@@ -5851,9 +5851,9 @@ msgstr ""
 #: kmvirtualmanager.cpp:161
 msgid ""
 "You are about to set a pseudo-printer as your personal default. This "
-"setting is specific to KDE and will not be available outside KDE applications. "
+"setting is specific to TDE and will not be available outside TDE applications. "
 "Note that this will only make your personal default printer as undefined for "
-"non-KDE applications and should not prevent you from printing normally. Do you "
+"non-TDE applications and should not prevent you from printing normally. Do you "
 "really want to set %1 as your personal default?"
 msgstr ""
 
@@ -5870,7 +5870,7 @@ msgid ""
 "here, the 'Poster Printing' filter will be auto-loaded in  the "
 "'Filters' tab of this dialog. 
     "
 "
    This tab is only visible if the external 'poster' "
-"utility is  discovered by KDEPrint on your system. ['poster' "
+"utility is  discovered by TDEPrint on your system. ['poster' "
 "is a commandline  utility that enables you to convert PostScript files into "
 "tiled printouts  which allow for oversized appearance of the stitched-together "
 "tiles.] 
     "
@@ -5878,7 +5878,7 @@ msgid ""
 "must use a patched version of 'poster'. Ask your operating system vendor to  "
 "provide a patched version of 'poster' if he does not already. 
     "
 "
    Additional hint for power users: A patched version of 'poster' is  "
-"available from the KDEPrint Website  "
+"available from the TDEPrint Website  "
 "at http://printing.kde.org/downloads/.  The direct link to the patched source tarball is   Add Filter button "
 "
    This button calls a little dialog to let you select a filter here. 
     "
 "
    Note 1: You can chain different filters as long as you make  sure "
-"that the output of one fits as input of the next. (KDEPrint  checks your "
+"that the output of one fits as input of the next. (TDEPrint  checks your "
 "filtering chain and will warn you if you fail to do so.
      "
 "
    Note 2: The filters you define here are applied to your jobfile  "
 "before it is handed downstream to your spooler and print  subsystem "
@@ -6087,7 +6087,7 @@ msgid ""
 "
    This field shows some general info about the selected filter.  Amongst them "
 "are:  "
 "
        "
-"
    • the filter name (as displayed in the KDEPrint user interface); "
+"
    • the filter name (as displayed in the TDEPrint user interface); "
 "
      •   "
 "
    • the filter requirements (that is the external program that needs  "
 "to present and executable on this system); 
      •   "
@@ -6104,7 +6104,7 @@ msgid ""
 "  Filtering Chain (if enabled, is run before "
 "actual  job submission to print system) "
 "
      This field shows which filters are currently selected to act as "
-"'pre-filters'  for KDEPrint. Pre-filters are processing the print files "
+"'pre-filters'  for TDEPrint. Pre-filters are processing the print files "
 "before they are  send downstream to your real print subsystem. 
        "
 "
      The list shown in this field may be empty (default). 
        "
 "
      The pre-filters act on the printjob in the order they are listed (from top "
@@ -6114,13 +6114,13 @@ msgid ""
 "example: if your file is ASCII text, and you want the  output being processed "
 "by the 'Multipage per Sheet' filter, the first filter must be  one that "
 "processes ASCII into PostScript. 
        "
-"
      KDEPrint can utilize any external filtering program which you may "
+"
      TDEPrint can utilize any external filtering program which you may "
 "find useful  through this interface. 
        "
-"
      KDEPrint ships preconfigured with support for a selection of common filters. "
-"These  filters however need to be  installed independently from KDEPrint. These "
-"pre-filters work for all print subsystems supported by KDEPrint (such "
+"
      TDEPrint ships preconfigured with support for a selection of common filters. "
+"These  filters however need to be  installed independently from TDEPrint. These "
+"pre-filters work for all print subsystems supported by TDEPrint (such "
 "as CUPS, LPRng and LPD), because they are not depending on these.
       ."
-"
       Amongst the pre-configured filters shipping with KDEPrint are: 
        "
+"
       Amongst the pre-configured filters shipping with TDEPrint are: 
        "
 "
          "
 "
      • the Enscript text filter  
        •   "
 "
      • a Multiple Pages per Sheet filter  "
@@ -6131,7 +6131,7 @@ msgid ""
 "click on the funnel icon (topmost on  the right icon column group) and "
 "proceed. 
         "
 "
        Please click on the other elements of this dialog to learn more about the "
-"KDEPrint  pre-filters.  
         "
+"TDEPrint  pre-filters.  
         "
 msgstr ""
 
 #: kpfilterpage.cpp:125
@@ -6187,7 +6187,7 @@ msgid ""
 "
          "
 "
        • Color and
          •   "
 "
        • Grayscale
          Note: This selection field may be grayed "
-"out and made inactive.  This happens if KDEPrint can not retrieve  enough "
+"out and made inactive.  This happens if TDEPrint can not retrieve  enough "
 "information about your print file. In this case the embedded color- or "
 "grayscale information  of your printfile, and the default handling of the "
 "printer take precedence.  "
-- 
cgit v1.2.3