From 0a3068399e3af480a253ac401793c0e6afadde3e Mon Sep 17 00:00:00 2001 From: Darrell Anderson Date: Fri, 23 Mar 2012 18:31:57 -0500 Subject: Fix KDE -> TDE branding. --- tde-i18n-nn/messages/tdelibs/kio.po | 164 ++++++++--------- tde-i18n-nn/messages/tdelibs/tdelibs.po | 220 +++++++++++------------ tde-i18n-nn/messages/tdelibs/tdeprint.po | 292 +++++++++++++++---------------- 3 files changed, 338 insertions(+), 338 deletions(-) (limited to 'tde-i18n-nn') diff --git a/tde-i18n-nn/messages/tdelibs/kio.po b/tde-i18n-nn/messages/tdelibs/kio.po index ff4c941ee1b..30d6b24613b 100644 --- a/tde-i18n-nn/messages/tdelibs/kio.po +++ b/tde-i18n-nn/messages/tdelibs/kio.po @@ -397,11 +397,11 @@ msgstr "" #: kio/tcpslavebase.cpp:1008 msgid "" -"SSL certificate is being rejected as requested. You can disable this in the KDE " +"SSL certificate is being rejected as requested. You can disable this in the TDE " "Control Center." msgstr "" "SSL-sertifikatet vert nekta. Du kan endra innstillingane i " -"KDE-kontrollsenteret." +"TDE-kontrollsenteret." #: kio/tcpslavebase.cpp:1020 msgid "Co&nnect" @@ -1200,19 +1200,19 @@ msgstr "" #: kio/global.cpp:586 msgid "" -"When all else fails, please consider helping the KDE team or the third party " +"When all else fails, please consider helping the TDE team or the third party " "maintainer of this software by submitting a high quality bug report. If the " "software is provided by a third party, please contact them directly. Otherwise, " "first look to see if the same bug has been submitted by someone else by " -"searching at the KDE bug reporting website" +"searching at the TDE bug reporting website" ". If not, take note of the details given above, and include them in your bug " "report, along with as many other details as you think might help." msgstr "" -"Dersom alt anna mislukkast, kan du hjelpa KDE eller dei som har laga programmet " -"ved å senda inn ein god feilrapport. Dersom programmet kjem frå andre enn KDE, " +"Dersom alt anna mislukkast, kan du hjelpa TDE eller dei som har laga programmet " +"ved å senda inn ein god feilrapport. Dersom programmet kjem frå andre enn TDE, " "ta kontakt direkte med produsenten. Viss ikkje, kan du sjå om den same feilen " "alt er rapportert av andre ved å søkja på " -"KDE-nettstaden for feilrapportering. Dersom feilen ikkje er rapportert, bør " +"TDE-nettstaden for feilrapportering. Dersom feilen ikkje er rapportert, bør " "du notera alle opplysningane over og ta dei med i feilrapporten saman med alle " "andre detaljar du trur kan hjelpa." @@ -1310,11 +1310,11 @@ msgstr "" #: kio/global.cpp:637 msgid "" "The program which provides compatibility with this protocol may not have been " -"updated with your last update of KDE. This can cause the program to be " +"updated with your last update of TDE. This can cause the program to be " "incompatible with the current version and thus not start." msgstr "" "Programmet som gjev kompatibilitet med denne protokollen vart kanskje ikkje " -"oppdatert då du sist oppdaterte KDE. I så fall kan det henda programmet ikkje " +"oppdatert då du sist oppdaterte TDE. I så fall kan det henda programmet ikkje " "startar fordi det er inkompatibelt med denne versjonen." #: kio/global.cpp:645 @@ -1353,10 +1353,10 @@ msgstr "Protokollen %1 er ikkje støtta" #: kio/global.cpp:665 msgid "" -"The protocol %1 is not supported by the KDE programs currently " +"The protocol %1 is not supported by the TDE programs currently " "installed on this computer." msgstr "" -"Protokollen %1 er ikkje støtta av KDE-programma som er " +"Protokollen %1 er ikkje støtta av TDE-programma som er " "installerte på denne maskina." #: kio/global.cpp:668 @@ -1373,12 +1373,12 @@ msgstr "" #: kio/global.cpp:671 msgid "" -"You may perform a search on the Internet for a KDE program (called a kioslave " +"You may perform a search on the Internet for a TDE program (called a kioslave " "or ioslave) which supports this protocol. Places to search include http://kde-apps.org/ " "and http://freshmeat.net/." msgstr "" -"Du kan utføra eit søk på Internett etter eit KDE-program (kalla ein kioslave " +"Du kan utføra eit søk på Internett etter eit TDE-program (kalla ein kioslave " "eller ioslave) som støttar denne protokollen. Aktuelle nettstadar er mellom " "anna http://kde-apps.org/ " "og http://freshmeat.net/." @@ -1399,12 +1399,12 @@ msgstr "Adressa (URL-en) du oppgav refererer ikkje til nokon ressurs." #: kio/global.cpp:685 msgid "" -"KDE is able to communicate through a protocol within a protocol; the protocol " +"TDE is able to communicate through a protocol within a protocol; the protocol " "specified is only for use in such situations, however this is not one of these " "situations. This is a rare event, and is likely to indicate a programming " "error." msgstr "" -"KDE kan kommunisera gjennom ein protokoll inni ein protokoll. Den spesifiserte " +"TDE kan kommunisera gjennom ein protokoll inni ein protokoll. Den spesifiserte " "protokollen er berre for slike tilfelle, medan dette ikkje er eit slikt " "tilfelle. Denne hendinga er sjeldan, og skuldast sannsynlegvis ein " "programmeringsfeil." @@ -1416,20 +1416,20 @@ msgstr "Ustøtta handling: %1" #: kio/global.cpp:694 msgid "" -"The requested action is not supported by the KDE program which is implementing " +"The requested action is not supported by the TDE program which is implementing " "the %1 protocol." msgstr "" -"Den førespurde handlinga er ikkje støtta av KDE-programmet som implementerer " +"Den førespurde handlinga er ikkje støtta av TDE-programmet som implementerer " "%1-protokollen." #: kio/global.cpp:697 msgid "" -"This error is very much dependent on the KDE program. The additional " -"information should give you more information than is available to the KDE " +"This error is very much dependent on the TDE program. The additional " +"information should give you more information than is available to the TDE " "input/output architecture." msgstr "" -"Denne feilen er i stor grad avhengig av KDE-programmet. Ekstrainformasjonen bør " -"gje deg meir informasjon enn du kan få gjennom inn/ut-arkitekturen i KDE." +"Denne feilen er i stor grad avhengig av TDE-programmet. Ekstrainformasjonen bør " +"gje deg meir informasjon enn du kan få gjennom inn/ut-arkitekturen i TDE." #: kio/global.cpp:700 msgid "Attempt to find another way to accomplish the same outcome." @@ -1582,10 +1582,10 @@ msgstr "Protokollen %1 er ikkje noko filsystem" #: kio/global.cpp:792 msgid "" "This means that a request was made which requires determining the contents of " -"the folder, and the KDE program supporting this protocol is unable to do so." +"the folder, and the TDE program supporting this protocol is unable to do so." msgstr "" "Dette tyder at førespurnaden ikkje klarte å avgjera innhaldet i mappa fordi " -"KDE-programmet som støttar protokollen ikkje klarar det." +"TDE-programmet som støttar protokollen ikkje klarar det." #: kio/global.cpp:800 msgid "Cyclic Link Detected" @@ -1594,12 +1594,12 @@ msgstr "Syklisk lenkje oppdaga" #: kio/global.cpp:801 msgid "" "UNIX environments are commonly able to link a file or folder to a separate name " -"and/or location. KDE detected a link or series of links that results in an " +"and/or location. TDE detected a link or series of links that results in an " "infinite loop - i.e. the file was (perhaps in a roundabout way) linked to " "itself." msgstr "" "UNIX-miljø kan vanlegvis lenkja filer eller mapper til andre namn og/eller " -"plasseringar. KDE oppdaga ei lenkje eller ei lenkjefølgje som går i uendeleg " +"plasseringar. TDE oppdaga ei lenkje eller ei lenkjefølgje som går i uendeleg " "løkkje. Fila er altså (kanskje via omvegar) ei lenkje til seg sjølv." #: kio/global.cpp:805 kio/global.cpp:827 @@ -1629,12 +1629,12 @@ msgstr "Syklisk lenkje oppdaga under kopiering" #: kio/global.cpp:822 msgid "" "UNIX environments are commonly able to link a file or folder to a separate name " -"and/or location. During the requested copy operation, KDE detected a link or " +"and/or location. During the requested copy operation, TDE detected a link or " "series of links that results in an infinite loop - i.e. the file was (perhaps " "in a roundabout way) linked to itself." msgstr "" "UNIX-miljø kan vanlegvis lenkja filer eller mapper til andre namn og/eller " -"plasseringar. I løpet av kopieringsoperasjonen oppdaga KDE ei lenkje eller ei " +"plasseringar. I løpet av kopieringsoperasjonen oppdaga TDE ei lenkje eller ei " "lenkjefølgje som går i uendeleg løkkje. Fila er altså (kanskje via omvegar) ei " "lenkje til seg sjølv." @@ -1735,12 +1735,12 @@ msgstr "" #: kio/global.cpp:873 msgid "" -"KDE is able to communicate through a protocol within a protocol. This request " +"TDE is able to communicate through a protocol within a protocol. This request " "specified a protocol be used as such, however this protocol is not capable of " "such an action. This is a rare event, and is likely to indicate a programming " "error." msgstr "" -"KDE kan kommunisera gjennom ein protokoll inni ein annan protokoll. Denne " +"TDE kan kommunisera gjennom ein protokoll inni ein annan protokoll. Denne " "førespurnaden spesifiserte slik kommunikasjon, men denne protokollen kan ikkje " "kommunisera på den måten. Dette skjer sjeldan, og skuldast vanlegvis " "programmeringsfeil." @@ -2081,16 +2081,16 @@ msgstr "Feil ved autentisering, Metoden %1 er ikkje støtta" msgid "" "Although you may have supplied the correct authentication details, the " "authentication failed because the method that the server is using is not " -"supported by the KDE program implementing the protocol %1." +"supported by the TDE program implementing the protocol %1." msgstr "" "Sjølv om du kan ha oppgjeve rette autentiseringsdetaljar, kan autentiseringa ha " -"mislukkast fordi metoden som tenaren brukar ikkje er støtta av KDE-programmet " +"mislukkast fordi metoden som tenaren brukar ikkje er støtta av TDE-programmet " "som implementerer protokollen %1." #: kio/global.cpp:1101 msgid "" "Please file a bug at http://bugs.kde.org/ " -"to inform the KDE team of the unsupported authentication method." +"to inform the TDE team of the unsupported authentication method." msgstr "" "Rapporter gjerne ein feil på " "http://bugs.kde.org/ for å melda frå til utviklarane av " @@ -2144,7 +2144,7 @@ msgid "" "
  • Timeout for establishing a connection: %1 seconds
    • " "
  • Timeout for receiving a response: %2 seconds
    • " "
  • Timeout for accessing proxy servers: %3 seconds
    • " -"Please note that you can alter these timeout settings in the KDE Control " +"Please note that you can alter these timeout settings in the TDE Control " "Center, by selecting Network -> Preferences." msgstr "" "Sjølv om det vart oppretta kontakt med tenaren, kom det ikkje noko svar innan " @@ -2153,7 +2153,7 @@ msgstr "" "
  • Tidsgrense for oppretting av samband: %1 sekund
    • " "
  • Tidsgrense for mottak av svar: %2 sekund
    • " "
  • Tidsgrense for tilgang til mellomtenarar: %3 sekund
    • " -"Hugs at du kan endra desse tidsgrensene i KDE-kontrollsenteret, ved å velja " +"Hugs at du kan endra desse tidsgrensene i TDE-kontrollsenteret, ved å velja " "Nettverk ->Innstillingar." #: kio/global.cpp:1140 @@ -2472,8 +2472,8 @@ msgid "&Edit..." msgstr "&Rediger …" #: kio/kmimetypechooser.cpp:104 -msgid "Click this button to display the familiar KDE mime type editor." -msgstr "Bruk denne knappen for å redigera MIME-typar i KDE." +msgid "Click this button to display the familiar TDE mime type editor." +msgstr "Bruk denne knappen for å redigera MIME-typar i TDE." #: kssl/ksslcertdlg.cc:61 msgid "Certificate" @@ -2492,8 +2492,8 @@ msgid "Do not send a certificate" msgstr "Send ikkje sertifikat" #: kssl/ksslcertdlg.cc:84 -msgid "KDE SSL Certificate Dialog" -msgstr "KDE SSL-sertifikatdialog" +msgid "TDE SSL Certificate Dialog" +msgstr "TDE SSL-sertifikatdialog" #: kssl/ksslcertdlg.cc:139 msgid "" @@ -2614,24 +2614,24 @@ msgid "GMT" msgstr "GMT" #: kssl/ksslkeygen.cc:48 -msgid "KDE Certificate Request" -msgstr "KDE-sertifikatførespurnad" +msgid "TDE Certificate Request" +msgstr "TDE-sertifikatførespurnad" #: kssl/ksslkeygen.cc:50 -msgid "KDE Certificate Request - Password" -msgstr "KDE-sertifikatpassord" +msgid "TDE Certificate Request - Password" +msgstr "TDE-sertifikatpassord" #: kssl/ksslkeygen.cc:93 msgid "Unsupported key size." msgstr "Ustøtta nøkkelstorleik." #: kssl/ksslinfodlg.cc:120 kssl/ksslkeygen.cc:93 -msgid "KDE SSL Information" -msgstr "KDE SSL-informasjon" +msgid "TDE SSL Information" +msgstr "TDE SSL-informasjon" #: kssl/ksslkeygen.cc:97 misc/uiserver.cpp:1383 -msgid "KDE" -msgstr "KDE" +msgid "TDE" +msgstr "TDE" #: kssl/ksslkeygen.cc:97 msgid "Please wait while the encryption keys are generated..." @@ -2682,8 +2682,8 @@ msgid "Current connection is not secured with SSL." msgstr "Sambandet er ikkje sikra med SSL." #: kssl/ksslinfodlg.cc:99 -msgid "SSL support is not available in this build of KDE." -msgstr "SSL-støtte er ikkje tilgjengeleg i denne KDE-utgåva." +msgid "SSL support is not available in this build of TDE." +msgstr "SSL-støtte er ikkje tilgjengeleg i denne TDE-utgåva." #: kssl/ksslinfodlg.cc:109 msgid "C&ryptography Configuration..." @@ -2878,9 +2878,9 @@ msgstr "" #: misc/kfile/fileprops.cpp:240 msgid "" -"Opens a KDE properties dialog to allow viewing and modifying of metadata of the " +"Opens a TDE properties dialog to allow viewing and modifying of metadata of the " "given file(s)" -msgstr "Opnar ein KDE-dialog der du kan sjå og endra metadata for fila/filene." +msgstr "Opnar ein TDE-dialog der du kan sjå og endra metadata for fila/filene." #: misc/kfile/fileprops.cpp:244 msgid "" @@ -2931,10 +2931,10 @@ msgstr "Kan ikkje avgjera metadata" #: misc/kwalletd/kwalletd.cpp:400 msgid "" -"KDE has requested to open the wallet '%1'. Please enter the password " +"TDE has requested to open the wallet '%1'. Please enter the password " "for this wallet below." msgstr "" -"KDE har bede om å få opna lommeboka «%1». Oppgje eit passord for " +"TDE har bede om å få opna lommeboka «%1». Oppgje eit passord for " "denne lommeboka nedanfor." #: misc/kwalletd/kwalletd.cpp:402 @@ -2952,31 +2952,31 @@ msgstr "&Opna" #: misc/kwalletd/kwalletd.cpp:414 msgid "" -"KDE has requested to open the wallet. This is used to store sensitive data in a " +"TDE has requested to open the wallet. This is used to store sensitive data in a " "secure fashion. Please enter a password to use with this wallet or click cancel " "to deny the application's request." msgstr "" -"KDE har bede om å få opna lommeboka. Denne vert bruka til å lagra følsomme data " +"TDE har bede om å få opna lommeboka. Denne vert bruka til å lagra følsomme data " "på ein trygg måte. Oppgje eit passord for denne lommeboka eller trykk «Avbryt» " "for å nekta applikasjonen tilgang." #: misc/kwalletd/kwalletd.cpp:416 msgid "" -"The application '%1' has requested to open the KDE wallet. This is " +"The application '%1' has requested to open the TDE wallet. This is " "used to store sensitive data in a secure fashion. Please enter a password to " "use with this wallet or click cancel to deny the application's request." msgstr "" -"Programmet «%1» har bede om å få opna KDE-lommeboka. Denne vert " +"Programmet «%1» har bede om å få opna TDE-lommeboka. Denne vert " "bruka til å lagra følsomme data på ein trygg måte. Oppgje eit passord for denne " "lommeboka eller trykk «Avbryt» for å nekta applikasjonen tilgang." #: misc/kwalletd/kwalletd.cpp:423 msgid "" -"KDE has requested to create a new wallet named '%1" +"TDE has requested to create a new wallet named '%1" "'. Please choose a password for this wallet, or cancel to deny the " "application's request." msgstr "" -"KDE har bedt om å få laga ei ny lommebok med namnet «%1" +"TDE har bedt om å få laga ei ny lommebok med namnet «%1" "». Vel eit passord for denne lommeboka, eller avbryt for å nekta førespurnaden." #: misc/kwalletd/kwalletd.cpp:425 @@ -2996,8 +2996,8 @@ msgstr "&Lag" #: misc/kwalletd/kwalletd.cpp:432 misc/kwalletd/kwalletd.cpp:607 #: misc/kwalletd/kwalletd.cpp:623 misc/kwalletd/kwalletd.cpp:634 #: misc/kwalletd/kwalletd.cpp:639 misc/kwalletd/kwalletd.cpp:1157 -msgid "KDE Wallet Service" -msgstr "KDE Lommebok-teneste" +msgid "TDE Wallet Service" +msgstr "TDE Lommebok-teneste" #: misc/kwalletd/kwalletd.cpp:444 msgid "" @@ -3008,8 +3008,8 @@ msgstr "" "
    (Feilkode %2: %3)" #: misc/kwalletd/kwalletd.cpp:518 -msgid "KDE has requested access to the open wallet '%1'." -msgstr "KDE har bede om tilgang til den opne lommeboka «%1»." +msgid "TDE has requested access to the open wallet '%1'." +msgstr "TDE har bede om tilgang til den opne lommeboka «%1»." #: misc/kwalletd/kwalletd.cpp:520 msgid "" @@ -3220,8 +3220,8 @@ msgid "" msgstr " Tid att: %1 " #: misc/uiserver.cpp:1384 -msgid "KDE Progress Information UI Server" -msgstr "KDE UI-tenar for framgangsinfo" +msgid "TDE Progress Information UI Server" +msgstr "TDE UI-tenar for framgangsinfo" #: misc/uiserver.cpp:1387 misc/uiserver.cpp:1388 msgid "Developer" @@ -4114,7 +4114,7 @@ msgid "" "already exist). This extension is based on the file type that you have chosen " "to save in." "
    " -"
    If you do not want KDE to supply an extension for the filename, you can " +"
    If you do not want TDE to supply an extension for the filename, you can " "either turn this option off or you can suppress it by adding a period (.) to " "the end of the filename (the period will be automatically removed)." "If unsure, keep this option enabled as it makes your files more manageable." @@ -4131,7 +4131,7 @@ msgstr "" "når du trykkjer Lagra, så blir %3 lagt til slutten av filnamnet (viss " "filnamnet ikkje finst frå før). Dette etternamnet er basert på den filtypen du " "har valt som lagringstype. " -"
    Viss du ikkje vil at KDE skal setja på eit etternamn for filnamnet, så " +"
    Viss du ikkje vil at TDE skal setja på eit etternamn for filnamnet, så " "kan du anten slå av dette valet, eller undertrykkja det ved å leggja til eit " "punktum (.) til filnamnet (punktumet blir automatisk fjerna). " "Viss du ikkje er sikker, så la valet vera på, fordi det gjer det lettare å " @@ -4142,13 +4142,13 @@ msgid "" "This button allows you to bookmark specific locations. Click on this button " "to open the bookmark menu where you may add, edit or select a bookmark." "

    These bookmarks are specific to the file dialog, but otherwise operate like " -"bookmarks elsewhere in KDE." +"bookmarks elsewhere in TDE." msgstr "" "Med denne knappen kan du setja bokmerke på visse adresser. Dersom du " "trykkjer på knappen, får du sjå ein bokmerkemeny der du kan leggja til, endra " "eller velja eit bokmerke. " "

    Desse bokmerka gjeld berre for fildialogen, men fungerer elles som vanlege " -"KDE-bokmerke." +"TDE-bokmerke." #: kfile/kfileiconview.cpp:62 msgid "Small Icons" @@ -5150,8 +5150,8 @@ msgstr "" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 16 #: rc.cpp:15 #, no-c-format -msgid "KDE Wallet Wizard" -msgstr "Vegvisar for KDE-lommebok" +msgid "TDE Wallet Wizard" +msgstr "Vegvisar for TDE-lommebok" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 23 #: rc.cpp:18 @@ -5162,19 +5162,19 @@ msgstr "Introduksjon" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 56 #: rc.cpp:21 #, no-c-format -msgid "KWallet - The KDE Wallet System" -msgstr "KWallet – KDE sitt lommebok-system" +msgid "KWallet - The TDE Wallet System" +msgstr "KWallet – TDE sitt lommebok-system" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 81 #: rc.cpp:24 #, no-c-format msgid "" -"Welcome to KWallet, the KDE Wallet System. KWallet allows you to store your " +"Welcome to KWallet, the TDE Wallet System. KWallet allows you to store your " "passwords and other personal information on disk in an encrypted file, " "preventing others from viewing the information. This wizard will tell you " "about KWallet and help you configure it for the first time." msgstr "" -"Dette er KWallet – KDE sitt lommeboksystem. Med KWallet kan du lagra passorda " +"Dette er KWallet – TDE sitt lommeboksystem. Med KWallet kan du lagra passorda " "dine og andre personlege opplysningar på disken i ei kryptert fil. Slik unngår " "du at andre kan sjå denne informasjonen (heller ikkje «root» kan lesa det). " "Denne vegvisaren gjev deg informasjon om KWallet og hjelper deg å setja opp " @@ -5196,7 +5196,7 @@ msgstr "&Avanserte innstillingar" #: rc.cpp:36 #, no-c-format msgid "" -"The KDE Wallet system stores your data in a wallet " +"The TDE Wallet system stores your data in a wallet " "file on your local hard disk. The data is only written in encrypted form, " "presently using the blowfish algorithm with your password as the key. When a " "wallet is opened, the wallet manager application will launch and display an " @@ -5222,7 +5222,7 @@ msgstr "Passordval" #: rc.cpp:42 #, no-c-format msgid "" -"Various applications may attempt to use the KDE wallet to store passwords or " +"Various applications may attempt to use the TDE wallet to store passwords or " "other information such as web form data and cookies. If you would like these " "applications to use the wallet, you must enable it now and choose a password. " "The password you choose cannot be recovered if it is lost, and will " @@ -5251,8 +5251,8 @@ msgstr "Stadfest passordet:" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 301 #: rc.cpp:51 #, no-c-format -msgid "Yes, I wish to use the KDE wallet to store my personal information." -msgstr "Ja, eg vil bruka KDE-lommeboka til å lagra personlege opplysingar." +msgid "Yes, I wish to use the TDE wallet to store my personal information." +msgstr "Ja, eg vil bruka TDE-lommeboka til å lagra personlege opplysingar." #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 390 #: rc.cpp:54 @@ -5264,12 +5264,12 @@ msgstr "Tryggleiksklasse" #: rc.cpp:57 #, no-c-format msgid "" -"The KDE Wallet system allows you to control the level of security of your " +"The TDE Wallet system allows you to control the level of security of your " "personal data. Some of these settings do impact usability. While the default " "settings are generally acceptable for most users, you may wish to change some " "of them. You may further tune these settings from the KWallet control module." msgstr "" -"Med KDE sitt lommeboksystem kan du avgjera tryggleiksklassa for dine personlege " +"Med TDE sitt lommeboksystem kan du avgjera tryggleiksklassa for dine personlege " "opplysingar. Nokre av desse innstillingane gjer systemet litt vanskelegare å " "bruka. Standard-innstillingane er vanlegvis akseptable for dei fleste " "brukarar, men det kan vera at du vil endra nokre av dei. Du kan justera " @@ -6012,8 +6012,8 @@ msgstr "Klarte ikkje lesa %1" #: ../kioslave/http/http_cache_cleaner.cpp:53 #: ../kioslave/http/http_cache_cleaner.cpp:194 -msgid "KDE HTTP cache maintenance tool" -msgstr "KDE vedlikehaldsverktøy for HTTP-mellomlager" +msgid "TDE HTTP cache maintenance tool" +msgstr "TDE vedlikehaldsverktøy for HTTP-mellomlager" #: ../kioslave/http/http_cache_cleaner.cpp:59 msgid "Empty the cache" diff --git a/tde-i18n-nn/messages/tdelibs/tdelibs.po b/tde-i18n-nn/messages/tdelibs/tdelibs.po index eb82877ade3..86675987eb1 100644 --- a/tde-i18n-nn/messages/tdelibs/tdelibs.po +++ b/tde-i18n-nn/messages/tdelibs/tdelibs.po @@ -581,10 +581,10 @@ msgstr "Hopp over ord i &store bokstavar" #, no-c-format msgid "" "If checked, words that consist of only uppercase letters are not spell checked. " -"This is useful if you have a lot of acronyms, such as KDE for example." +"This is useful if you have a lot of acronyms, such as TDE for example." msgstr "" "Kryss av for å hindra at ord med berre store bokstavar vert stavekontrollerte. " -"Dette er nyttig dersom du brukar mange forkortingar, som til dømes «KDE»." +"Dette er nyttig dersom du brukar mange forkortingar, som til dømes «TDE»." #. i18n: file ./kspell2/ui/configui.ui line 67 #: rc.cpp:292 @@ -667,8 +667,8 @@ msgstr "Rekursivt søk etter domene" #. i18n: file ./dnssd/kcm_kdnssd.kcfg line 19 #: rc.cpp:455 #, no-c-format -msgid "Removed in KDE 3.5.0" -msgstr "Fjerna i KDE 3.5.0" +msgid "Removed in TDE 3.5.0" +msgstr "Fjerna i TDE 3.5.0" #. i18n: file ./dnssd/kcm_kdnssd.kcfg line 25 #: rc.cpp:458 @@ -1613,8 +1613,8 @@ msgid "Unable find script \"%1\"." msgstr "Fann ikkje skriptet «%1»." #: interfaces/kscript/scriptloader.cpp:40 -msgid "KDE Scripts" -msgstr "KDE-skript" +msgid "TDE Scripts" +msgstr "TDE-skript" #: arts/kde/kvideowidget.cpp:82 msgid "Video Toolbar" @@ -2414,20 +2414,20 @@ msgstr "Klarte ikkje markera menyvalet «%1»." #: kded/kde-menu.cpp:111 msgid "" -"KDE Menu query tool.\n" +"TDE Menu query tool.\n" "This tool can be used to find in which menu a specific application is shown.\n" "The --highlight option can be used to visually indicate to the user where\n" -"in the KDE menu a specific application is located." +"in the TDE menu a specific application is located." msgstr "" -"KDE-menyspørjingsverktøy.\n" +"TDE-menyspørjingsverktøy.\n" "Dette verktøyet kan brukast til å finna den menyen der eit visst program er " "vist.\n" -"Med alternativet --highlight kan du markera visuelt kvar i KDE-menyen\n" +"Med alternativet --highlight kan du markera visuelt kvar i TDE-menyen\n" "programmet ligg." #: kded/kde-menu.cpp:116 msgid "kde-menu" -msgstr "KDE-meny" +msgstr "TDE-meny" #: kded/kbuildsycoca.cpp:724 kded/kbuildsycoca.cpp:725 kded/kde-menu.cpp:119 #: kded/khostname.cpp:362 tdeui/kaboutdialog.cpp:90 @@ -2479,20 +2479,20 @@ msgid "KDontChangeTheHostName" msgstr "KDontChangeTheHostName" #: kded/khostname.cpp:360 -msgid "Informs KDE about a change in hostname" -msgstr "Gir KDE melding om endringar i vertsnamn" +msgid "Informs TDE about a change in hostname" +msgstr "Gir TDE melding om endringar i vertsnamn" #: kded/kded.cpp:720 msgid "Check Sycoca database only once" msgstr "Berre sjekk Sycoca-database ein gong" #: kded/kded.cpp:860 -msgid "KDE Daemon" -msgstr "KDE-nisse" +msgid "TDE Daemon" +msgstr "TDE-nisse" #: kded/kded.cpp:862 -msgid "KDE Daemon - triggers Sycoca database updates when needed" -msgstr "KDE-nisse – utløyser Sycoca-databaseoppdateringar når det trengst" +msgid "TDE Daemon - triggers Sycoca database updates when needed" +msgstr "TDE-nisse – utløyser Sycoca-databaseoppdateringar når det trengst" #: kded/kbuildsycoca.cpp:483 msgid "" @@ -2558,16 +2558,16 @@ msgid "Rebuilds the system configuration cache." msgstr "Byggjer systeminformasjonslageret på nytt." #: kded/kbuildsycoca.cpp:750 -msgid "Reloading KDE configuration, please wait..." -msgstr "Lastar KDE-oppsettet på nytt, vent litt …" +msgid "Reloading TDE configuration, please wait..." +msgstr "Lastar TDE-oppsettet på nytt, vent litt …" #: kded/kbuildsycoca.cpp:751 -msgid "KDE Configuration Manager" -msgstr "KDE-oppsettshandterar" +msgid "TDE Configuration Manager" +msgstr "TDE-oppsettshandterar" #: kded/kbuildsycoca.cpp:753 -msgid "Do you want to reload KDE configuration?" -msgstr "Vil du lasta KDE-oppsettet på nytt?" +msgid "Do you want to reload TDE configuration?" +msgstr "Vil du lasta TDE-oppsettet på nytt?" #: kded/kbuildsycoca.cpp:753 msgid "Do Not Reload" @@ -2753,8 +2753,8 @@ msgid "The library %1 does not offer an %2 function." msgstr "Biblioteket %1 tilbyr ingen %2-funksjon." #: tdecore/klibloader.cpp:168 -msgid "The library %1 does not offer a KDE compatible factory." -msgstr "Biblioteket %1 tilbyr ingen KDE-kompatible fabrikkar." +msgid "The library %1 does not offer a TDE compatible factory." +msgstr "Biblioteket %1 tilbyr ingen TDE-kompatible fabrikkar." #: tdecore/klibloader.cpp:425 msgid "Library files for \"%1\" not found in paths." @@ -2769,11 +2769,11 @@ msgstr "LTR" #: tdecore/kapplication.cpp:1404 msgid "" -"There was an error setting up inter-process communications for KDE. The message " +"There was an error setting up inter-process communications for TDE. The message " "returned by the system was:\n" "\n" msgstr "" -"Det oppsto feil ved oppsettet av interprosesskommunikasjonen i KDE. Systemet " +"Det oppsto feil ved oppsettet av interprosesskommunikasjonen i TDE. Systemet " "returnerte denne meldinga:\n" "\n" @@ -2959,11 +2959,11 @@ msgstr "Klarte ikkje starta hjelpesenteret" #: tdecore/kapplication.cpp:2245 tdecore/kapplication.cpp:2280 #, c-format msgid "" -"Could not launch the KDE Help Center:\n" +"Could not launch the TDE Help Center:\n" "\n" "%1" msgstr "" -"Klarte ikkje starta KDE-hjelpa:\n" +"Klarte ikkje starta TDE-hjelpa:\n" "\n" "%1" @@ -4205,18 +4205,18 @@ msgstr "Adar II" #: tdecore/kaboutdata.cpp:388 msgid "" "_: replace this with information about your translation team\n" -"

    KDE is translated into many languages thanks to the work of the translation " +"

    TDE is translated into many languages thanks to the work of the translation " "teams all over the world.

    " -"

    For more information on KDE internationalization visit For more information on TDE internationalization visit http://l10n.kde.org

    " msgstr "" -"

    KDE er omsett til mange språk og var eitt av dei første store programma som " +"

    TDE er omsett til mange språk og var eitt av dei første store programma som " "fanst på nynorsk. Dersom du vil hjelpa med nynorskomsetjinga eller vil ha meir " "informasjon, ta kontakt med Skulelinux.

    " "

    Du finn fleire norske omsetjingar av fri programvare på nettstaden til " "Skulelinux: http://i18n.skulelinux.no/.

    " -"

    Du finn meir informasjon om internasjonaliseringa av KDE på Du finn meir informasjon om internasjonaliseringa av TDE på http://l10n.kde.org/.

    " #: tdecore/kaboutdata.cpp:444 @@ -4297,8 +4297,8 @@ msgid "Code generation options file" msgstr "Fil med val for kodegenerering" #: tdecore/kconfig_compiler/kconfig_compiler.cpp:955 -msgid "KDE .kcfg compiler" -msgstr "KDE .kcfg-kompilator" +msgid "TDE .kcfg compiler" +msgstr "TDE .kcfg-kompilator" #: tdecore/kconfig_compiler/kconfig_compiler.cpp:956 msgid "KConfig Compiler" @@ -5480,30 +5480,30 @@ msgstr "Nedtrekksliste og Automatisk" #: tdeui/kaboutkde.cpp:34 msgid "" -"The K Desktop Environment is written and maintained by the KDE Team, a " +"The K Desktop Environment is written and maintained by the TDE Team, a " "world-wide network of software engineers committed to Free Software " "development." "
    " -"
    No single group, company or organization controls the KDE source code. " -"Everyone is welcome to contribute to KDE." +"
    No single group, company or organization controls the TDE source code. " +"Everyone is welcome to contribute to TDE." "
    " "
    Visit http://www.kde.org " -"for more information on the KDE project. " +"for more information on the TDE project. " msgstr "" -"K Desktop Environment er skrive og vedlikehalde av KDE-laget, eit " +"K Desktop Environment er skrive og vedlikehalde av TDE-laget, eit " "verdsfemnande nettverk av programmerarar som driv med utvikling av fri " "programvare." "
    " "
    Inga enkel gruppe, firma eller organisasjon kontrollerer kjeldekoden til " -"KDE. Alle er velkomne til å bidra til KDE." +"TDE. Alle er velkomne til å bidra til TDE." "
    " -"
    Du finn meir informasjon om KDE-prosjektet på Du finn meir informasjon om TDE-prosjektet på http://www.kde.org/." #: tdeui/kaboutkde.cpp:43 msgid "" -"Software can always be improved, and the KDE Team is ready to do so. However, " +"Software can always be improved, and the TDE Team is ready to do so. However, " "you - the user - must tell us when something does not work as expected or could " "be done better." "
    " @@ -5515,7 +5515,7 @@ msgid "" "bug tracking system to register your wish. Make sure you use the severity " "called \"Wishlist\"." msgstr "" -"Ein kan alltid forbetra programvare, og KDE-laget arbeider heile tida for det. " +"Ein kan alltid forbetra programvare, og TDE-laget arbeider heile tida for det. " "Men du – som brukar – må melda frå til oss når noko ikkje verkar slik du " "forventar, eller om noko kunne vore gjort betre." "
    " @@ -5529,7 +5529,7 @@ msgstr "" #: tdeui/kaboutkde.cpp:54 msgid "" -"You do not have to be a software developer to be a member of the KDE team. You " +"You do not have to be a software developer to be a member of the TDE team. You " "can join the national teams that translate program interfaces. You can provide " "graphics, themes, sounds, and improved documentation. You decide!" "
    " @@ -5540,7 +5540,7 @@ msgid "" "HREF=\"http://developer.kde.org/\">http://developer.kde.org " "will provide you with what you need." msgstr "" -"Du treng ikkje vera programutviklar for å hjelpa til med KDE. Du kan arbeida " +"Du treng ikkje vera programutviklar for å hjelpa til med TDE. Du kan arbeida " "med omsetjingar, laga grafikk, tema, lydar eller betre hjelpetekstar. Her er " "noko for alle!" "
    " @@ -5552,30 +5552,30 @@ msgstr "" #: tdeui/kaboutkde.cpp:67 msgid "" -"KDE is available free of charge, but making it is not free." +"TDE is available free of charge, but making it is not free." "
    " -"
    Thus, the KDE team formed the KDE e.V., a non-profit organization legally " -"founded in Tuebingen, Germany. The KDE e.V. represents the KDE project in legal " +"
    Thus, the TDE team formed the TDE e.V., a non-profit organization legally " +"founded in Tuebingen, Germany. The TDE e.V. represents the TDE project in legal " "and financial matters. See " -"http://www.kde-ev.org for information on the KDE e.V." +"http://www.kde-ev.org for information on the TDE e.V." "
    " -"
    The KDE team does need financial support. Most of the money is used to " +"
    The TDE team does need financial support. Most of the money is used to " "reimburse members and others on expenses they experienced when contributing to " -"KDE. You are encouraged to support KDE through a financial donation, using one " +"TDE. You are encouraged to support TDE through a financial donation, using one " "of the ways described at " "http://www.kde.org/support/." "
    " "
    Thank you very much in advance for your support." msgstr "" -"Du får KDE gratis, men det er slett ikkje gratis å laga det. " +"Du får TDE gratis, men det er slett ikkje gratis å laga det. " "
    " -"
    KDE-laget har difor oppretta KDE e.V., ein profittlaus organisasjon " -"registrert i Tübingen i Tyskland. KDE e.V. representerer KDE-prosjektet i " +"
    TDE-laget har difor oppretta TDE e.V., ein profittlaus organisasjon " +"registrert i Tübingen i Tyskland. TDE e.V. representerer TDE-prosjektet i " "juridiske og finansielle saker. På " -"http://www.kde-ev.org/ finn du meir informasjon om KDE e.V. " +"http://www.kde-ev.org/ finn du meir informasjon om TDE e.V. " "
    " -"
    KDE-laget treng økonomisk støtte. Det meste av pengane går med til å dekkja " -"utgifter medlemmene våre har ved utviklinga av KDE. På     TDE-laget treng økonomisk støtte. Det meste av pengane går med til å dekkja " +"utgifter medlemmene våre har ved utviklinga av TDE. På http://www.kde.org/support.html " "kan du lesa om korleis du kan bidra. " "
    " @@ -5588,7 +5588,7 @@ msgstr "K Desktop Environment. Utgåve %1" #: tdeui/kaboutkde.cpp:83 msgid "" -"_: About KDE\n" +"_: About TDE\n" "&About" msgstr "&Om" @@ -5597,12 +5597,12 @@ msgid "&Report Bugs or Wishes" msgstr "&Rapporter feil eller ønskje" #: tdeui/kaboutkde.cpp:85 -msgid "&Join the KDE Team" -msgstr "H&jelp til med KDE" +msgid "&Join the TDE Team" +msgstr "H&jelp til med TDE" #: tdeui/kaboutkde.cpp:86 -msgid "&Support KDE" -msgstr "&Støtt KDE" +msgid "&Support TDE" +msgstr "&Støtt TDE" #: tdeui/kstdguiitem.cpp:110 khtml/java/kjavaappletserver.cpp:804 msgid "&Yes" @@ -6526,8 +6526,8 @@ msgid "&About %1" msgstr "&Om %1" #: tdeui/khelpmenu.cpp:176 tdeui/kstdaction_p.h:114 -msgid "About &KDE" -msgstr "Om &KDE" +msgid "About &TDE" +msgstr "Om &TDE" #: tdeui/kactionclasses.cpp:2072 msgid "Exit F&ull Screen Mode" @@ -6654,8 +6654,8 @@ msgid "Task" msgstr "Oppgåve" #: tdeui/kaboutdialog.cpp:704 -msgid "%1 %2 (Using KDE %3)" -msgstr "%1 %2 (brukar KDE %3)" +msgid "%1 %2 (Using TDE %3)" +msgstr "%1 %2 (brukar TDE %3)" #: tdeui/kaboutdialog.cpp:706 msgid "%1 %2, %3" @@ -7403,8 +7403,8 @@ msgstr "" "Filvedlegget vart ikkje sendt." #: khtml/khtml_part.cpp:4870 -msgid "KDE" -msgstr "KDE" +msgid "TDE" +msgstr "TDE" #: khtml/khtml_part.cpp:5776 msgid "(%1/s)" @@ -7799,8 +7799,8 @@ msgid "Archives" msgstr "Arkiv" #: khtml/java/kjavaappletviewer.cpp:451 -msgid "KDE Java Applet Plugin" -msgstr "KDE-tilleggsprogram for Java-miniprogram" +msgid "TDE Java Applet Plugin" +msgstr "TDE-tilleggsprogram for Java-miniprogram" #: khtml/java/kjavaapplet.cpp:225 msgid "Initializing Applet \"%1\"..." @@ -7995,8 +7995,8 @@ msgstr "" "klauncher: det vert starta automatisk av tdeinit.\n" #: kinit/klauncher.cpp:743 -msgid "KDEInit could not launch '%1'." -msgstr "KDEInit klarte ikkje starta «%1»" +msgid "TDEInit could not launch '%1'." +msgstr "TDEInit klarte ikkje starta «%1»" #: kinit/klauncher.cpp:918 kinit/klauncher.cpp:943 kinit/klauncher.cpp:960 msgid "Could not find service '%1'." @@ -8044,8 +8044,8 @@ msgid "KConf Update" msgstr "KConf-oppdatering" #: kconf_update/kconf_update.cpp:945 -msgid "KDE Tool for updating user configuration files" -msgstr "KDE-verktøy for oppdatering av brukaroppsett" +msgid "TDE Tool for updating user configuration files" +msgstr "TDE-verktøy for oppdatering av brukaroppsett" #: kspell2/ui/configdialog.cpp:38 msgid "KSpell2 Configuration" @@ -8080,13 +8080,13 @@ msgid "Web style plugin" msgstr "Vevstil-tilleggsmodul" #: kstyles/klegacy/plugin.cpp:28 -msgid "KDE LegacyStyle plugin" -msgstr "Programtillegg for gamle KDE-stilar" +msgid "TDE LegacyStyle plugin" +msgstr "Programtillegg for gamle TDE-stilar" #: kstyles/utils/installtheme/main.cpp:35 -msgid "KDE Tool to build a cache list of all pixmap themes installed" +msgid "TDE Tool to build a cache list of all pixmap themes installed" msgstr "" -"KDE-verktøy for å byggja ei mellomlagra liste over alle bilettemaa som er " +"TDE-verktøy for å byggja ei mellomlagra liste over alle bilettemaa som er " "installerte" #: kstyles/utils/installtheme/main.cpp:40 @@ -8454,7 +8454,7 @@ msgid "" "
    %1" "

    Possible reasons:

    " "
      " -"
    • An error occurred during your last KDE upgrade leaving an orphaned control " +"
    • An error occurred during your last TDE upgrade leaving an orphaned control " "module" "
    • You have old third party modules lying around.
    " "

    Check these points carefully and try to remove the module mentioned in the " @@ -8466,7 +8466,7 @@ msgstr "" "
    %1" "

    Mogelege grunnar:

    " "
      " -"
    • Det oppstod ein feil under din siste KDE-oppgraderinga som etterlot ein " +"
    • Det oppstod ein feil under din siste TDE-oppgraderinga som etterlot ein " "styringsmodul utan tilhøyrsle." "
    • Du har gamle tredjeparts-modular liggande.
    " "

    Undersøk dette grundig og forsøk å fjerna modulen som er nemnt i " @@ -8659,8 +8659,8 @@ msgid "kcmkresources" msgstr "kcmkresources" #: kresources/kcmkresources.cpp:45 -msgid "KDE Resources configuration module" -msgstr "KDE-modul for ressursinnstillingar" +msgid "TDE Resources configuration module" +msgstr "TDE-modul for ressursinnstillingar" #: kresources/kcmkresources.cpp:47 msgid "(c) 2003 Tobias Koenig" @@ -8838,24 +8838,24 @@ msgstr "Ikkje nok minne" msgid "" "Your local kab configuration file \"%1\" could not be created. kab will " "probably not work correctly without it.\n" -"Make sure you have not removed write permission from your local KDE directory " +"Make sure you have not removed write permission from your local TDE directory " "(usually ~/.kde)." msgstr "" "Klarte ikkje laga den lokale kab-oppsettfila «%1». kab vil truleg ikkje verka " "skikkeleg utan ho.\n" -"Sjekk at du ikkje har fjerna skriveløyvet frå den lokale KDE-katalogen " +"Sjekk at du ikkje har fjerna skriveløyvet frå den lokale TDE-katalogen " "(vanlegvis ~/.kde)." #: kab/addressbook.cc:461 msgid "" "Your standard kab database file \"%1\" could not be created. kab will probably " "not work correctly without it.\n" -"Make sure you have not removed write permission from your local KDE directory " +"Make sure you have not removed write permission from your local TDE directory " "(usually ~/.kde)." msgstr "" "Klarte ikkje laga standard-databasefila «%1» for kab. kab vil truleg ikkje " "verka skikkeleg utan ho.\n" -"Sjekk at du ikkje har fjerna skriveløyvet frå den lokale KDE-katalogen " +"Sjekk at du ikkje har fjerna skriveløyvet frå den lokale TDE-katalogen " "(vanlegvis ~/.kde)." #: kab/addressbook.cc:471 @@ -9160,8 +9160,8 @@ msgid "Import &All" msgstr "Importer &alle" #: kcert/kcertpart.cc:183 kcert/kcertpart.cc:274 kcert/kcertpart.cc:359 -msgid "KDE Secure Certificate Import" -msgstr "KDE-import av trygge sertifikat" +msgid "TDE Secure Certificate Import" +msgstr "TDE-import av trygge sertifikat" #: kcert/kcertpart.cc:184 msgid "Chain:" @@ -9252,8 +9252,8 @@ msgid "Certificate Import" msgstr "Sertifikatimport" #: kcert/kcertpart.cc:455 -msgid "You do not seem to have compiled KDE with SSL support." -msgstr "Det ser ikkje ut som om KDE er kompilert med SSL-støtte." +msgid "You do not seem to have compiled TDE with SSL support." +msgstr "Det ser ikkje ut som om TDE er kompilert med SSL-støtte." #: kcert/kcertpart.cc:460 msgid "Certificate file is empty." @@ -9293,23 +9293,23 @@ msgstr "" #: kcert/kcertpart.cc:741 kcert/kcertpart.cc:759 msgid "" -"Certificate has been successfully imported into KDE.\n" -"You can manage your certificate settings from the KDE Control Center." +"Certificate has been successfully imported into TDE.\n" +"You can manage your certificate settings from the TDE Control Center." msgstr "" -"Sertifikatet er importert til KDE.\n" -"Du kan tilpassa sertifikatinnstillingane frå KDE-kontrollsenteret." +"Sertifikatet er importert til TDE.\n" +"Du kan tilpassa sertifikatinnstillingane frå TDE-kontrollsenteret." #: kcert/kcertpart.cc:873 msgid "" -"Certificates have been successfully imported into KDE.\n" -"You can manage your certificate settings from the KDE Control Center." +"Certificates have been successfully imported into TDE.\n" +"You can manage your certificate settings from the TDE Control Center." msgstr "" -"Sertifikata er importerte til KDE.\n" -"Du kan tilpassa sertifikatinnstillingane frå KDE-kontrollsenteret." +"Sertifikata er importerte til TDE.\n" +"Du kan tilpassa sertifikatinnstillingane frå TDE-kontrollsenteret." #: kcert/kcertpart.cc:879 -msgid "KDE Certificate Part" -msgstr "KDE Sertifikatdel" +msgid "TDE Certificate Part" +msgstr "TDE Sertifikatdel" #: khtml/khtml_settings.cc:152 msgid "Accept" @@ -9496,12 +9496,12 @@ msgid "expand ${prefix} and ${exec_prefix} in output" msgstr "utvid ${prefix} og ${exec_prefix} i resultatteksten" #: tdecore/tde-config.cpp.in:19 -msgid "Compiled in prefix for KDE libraries" -msgstr "Innkompilert prefiks for KDE-biblioteka" +msgid "Compiled in prefix for TDE libraries" +msgstr "Innkompilert prefiks for TDE-biblioteka" #: tdecore/tde-config.cpp.in:20 -msgid "Compiled in exec_prefix for KDE libraries" -msgstr "Innkompilert exec_prefix for KDE-biblioteka" +msgid "Compiled in exec_prefix for TDE libraries" +msgstr "Innkompilert exec_prefix for TDE-biblioteka" #: tdecore/tde-config.cpp.in:21 msgid "Compiled in library path suffix" @@ -9512,12 +9512,12 @@ msgid "Prefix in $HOME used to write files" msgstr "Prefiks i $HOME bruka til å skriva filer" #: tdecore/tde-config.cpp.in:23 -msgid "Compiled in version string for KDE libraries" -msgstr "Innkompilert versjonsstreng for KDE-biblioteka" +msgid "Compiled in version string for TDE libraries" +msgstr "Innkompilert versjonsstreng for TDE-biblioteka" #: tdecore/tde-config.cpp.in:24 -msgid "Available KDE resource types" -msgstr "Tilgjengelege KDE-ressurstypar" +msgid "Available TDE resource types" +msgstr "Tilgjengelege TDE-ressurstypar" #: tdecore/tde-config.cpp.in:25 msgid "Search path for resource type" @@ -9537,7 +9537,7 @@ msgstr "Programmeny (.desktop-filer)" #: tdecore/tde-config.cpp.in:169 msgid "CGIs to run from kdehelp" -msgstr "CGI-ar som skal køyrast frå KDE-hjelp" +msgstr "CGI-ar som skal køyrast frå TDE-hjelp" #: tdecore/tde-config.cpp.in:170 msgid "Configuration files" diff --git a/tde-i18n-nn/messages/tdelibs/tdeprint.po b/tde-i18n-nn/messages/tdelibs/tdeprint.po index 2c1ad53924f..64dc670fe3b 100644 --- a/tde-i18n-nn/messages/tdelibs/tdeprint.po +++ b/tde-i18n-nn/messages/tdelibs/tdeprint.po @@ -503,13 +503,13 @@ msgstr "" msgid "" " Printer Selection Menu: " "

    Use this combo box to select the printer to which you want to print. " -"Initially (if you run KDEPrint for the first time), you may only find the " -"KDE special printers (which save jobs to disk [as PostScript- or " +"Initially (if you run TDEPrint for the first time), you may only find the " +"TDE special printers (which save jobs to disk [as PostScript- or " "PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " "a real printer, you need to... " "

      " "
    • ...either create a local printer with the help of the " -"KDE Add Printer Wizard. The Wizard is available for the CUPS and RLPR " +"TDE Add Printer Wizard. The Wizard is available for the CUPS and RLPR " "printing systems (click button to the left of the 'Properties' " "button),
      • " "
    • ...or try to connect to an existing remote CUPS print server. You can " @@ -517,7 +517,7 @@ msgid "" "opens: click on the 'CUPS server' icon: Fill in the information " "required to use the remote server.
    " "

    Note: It may happen that you successfully connected to a remote CUPS " -"server and still do not get a printer list. If this happens: force KDEPrint to " +"server and still do not get a printer list. If this happens: force TDEPrint to " "re-load its configuration files. To reload the configuration files, either " "start kprinter again, or use the switch the print system away from CUPS and " "back again once. The print system switch can be made through a selection in " @@ -525,19 +525,19 @@ msgid "" msgstr "" "Skrivarvalmeny: " "

    Bruk denne kombinasjonsboksen for å velja kva skrivar som skal skriva ut. Om " -"du berre finn KDE spesialskrivarar – som lagrar utskriftsjobbar til " +"du berre finn TDE spesialskrivarar – som lagrar utskriftsjobbar til " "disk (som PostScript- eller PDF-filer), eller leverer jobbar via e-post (som " "PDF-vedlegg) – men manglar ein ekte skrivar, må du … " "

      " "
    • … anten laga ein lokal skrivar med hjelp av " -"KDE-vegvisaren «Legg til skrivar» som er tilgjengeleg for CUPS og RLPR " +"TDE-vegvisaren «Legg til skrivar» som er tilgjengeleg for CUPS og RLPR " "utskriftssystem (trykk knappen til venstre for «Eigenskapar»-knappen),
      • " "
    • … eller kan du prøva å kopla til ein ekstern CUPS-skrivartenar ved å " "trykkja Systemval … knappen under. Eit nytt vindauge opnar seg: Trykk " "på CUPS-tenar-ikonet og fyll inn passande informasjon til ekstern " "tenar.
    " "

    Merk: Det kan henda at du ikkje får opp ei skrivarliste sjølv om du " -"har kopla deg til ein CUPS-tenar. Dersom dette hender, må du tvinga KDEPrint " +"har kopla deg til ein CUPS-tenar. Dersom dette hender, må du tvinga TDEPrint " "til å lasta inn oppsettsfilene på nytt. Då kan du anten starta kprinter på nytt " "eller byta til eit anna utskriftssystem enn CUPS og tilbake igjen. Du kan byta " "utskriftssystem med nedtrekkslista nedst i dette dialogvindauget når det er " @@ -563,7 +563,7 @@ msgid "" "

    To create a personal 'selective view list', click on the " "'System Options' button at the bottom of this dialog. Then, in the new " "dialog, select 'Filter' (left column in the " -"KDE Print Configuration dialog) and setup your selection..

    " +"TDE Print Configuration dialog) and setup your selection..

    " "

    Warning: Clicking this button without prior creation of a personal " "'selective view list' will make all printers dissappear from the " "view. (To re-enable all printers, just click this button again.)

    " @@ -575,23 +575,23 @@ msgstr "" "alle     skrivarane.

    " "

    Trykk på «Systemval …»-knappen i botnen av dette vindauget for å " "laga ei personleg filtrert liste. I det nye vindauget vel du «Filter» " -"(venstrekolonne i KDE utskriftsoppsett-dialogen).

    " +"(venstrekolonne i TDE utskriftsoppsett-dialogen).

    " "

    Åtvaring: Dersom du klikkar på denne knappen utan først å ha laga ei " "personleg filtrert liste, kjem alle skrivarane til å forsvinna frå " "visinga. (Trykk på denne knappen igjen for å henta inn att skrivarane.)

    " #: kprintdialog.cpp:154 msgid "" -"KDE Add Printer Wizard " -"

    This button starts the KDE Add Printer Wizard.

    " +"TDE Add Printer Wizard " +"

    This button starts the TDE Add Printer Wizard.

    " "

    Use the Wizard (with \"CUPS\" or \"RLPR\"" ") to add locally defined printers to your system.

    " -"

    Note: The KDE Add Printer Wizard does not " +"

    Note: The TDE Add Printer Wizard does not " "work, and this button is disabled if you use \"Generic LPD\", " "\"LPRng\", or \"Print Through an External Program\".)

    " msgstr "" -"KDE-vegvisar for å leggja til skrivar " -"

    Denne knappen startar KDE-vegvisaren for å leggja til skrivar.

    " +"TDE-vegvisar for å leggja til skrivar " +"

    Denne knappen startar TDE-vegvisaren for å leggja til skrivar.

    " "

    Du kan bruka denne vegvisaren (med CUPS eller RLPR" ") til å leggja til lokale skrivarar på systemet.

    " "

    Merk: Vegvisaren kan ikkje brukast dersom Generell LPD" @@ -626,31 +626,31 @@ msgid "" "

    This button starts a new dialog where you can adjust various settings of " "your printing system. Amongst them: " "

      " -"
    • Should KDE applications embed all fonts into the PostScript they generate " +"
    • Should TDE applications embed all fonts into the PostScript they generate " "for printing? " -"
    • Should KDE use an external PostScript viewer like gv " +"
    • Should TDE use an external PostScript viewer like gv " "for print page previews? " -"
    • Should KDEPrint use a local or a remote CUPS server?,
    " +"
  • Should TDEPrint use a local or a remote CUPS server?, " "and many more.... " msgstr "" " Systemval: " "

    Knappen startar eit nytt vindauge for justering av ulike innstillingar til " "utskriftssystemet. Blant dei: " "

      " -"
    • Skal KDE-program ta med alle skrifter i PostScript som vert laga ved " +"
    • Skal TDE-program ta med alle skrifter i PostScript som vert laga ved " "utskrift? " -"
    • Skal KDE bruka ein ekstern PostScript-framvisar som gv " +"
    • Skal TDE bruka ein ekstern PostScript-framvisar som gv " "for førehandsvising? " -"
    • Skal KDE-utskrift bruka ein lokal eller ekstern CUPS-tenar?,
    " +"
  • Skal TDE-utskrift bruka ein lokal eller ekstern CUPS-tenar?, " "og mykje anna … " #: kprintdialog.cpp:182 msgid "" -" Help: This button takes you to the complete KDEPrint Manual" +" Help: This button takes you to the complete TDEPrint Manual" ". " msgstr "" " Hjelp: Knappen fører deg til den komplette " -"hjelpeteksten til KDE-utskrift. " +"hjelpeteksten til TDE-utskrift. " #: kprintdialog.cpp:186 msgid "" @@ -663,12 +663,12 @@ msgstr "" #: kprintdialog.cpp:190 msgid "" " Print: This button sends the job to the printing process. If you " -"are sending non-PostScript files, you may be asked if you want KDE to convert " +"are sending non-PostScript files, you may be asked if you want TDE to convert " "the files into PostScript, or if you want your print subsystem (like CUPS) to " "do this. " msgstr "" " Skriv ut: Knappen sender jobben til ein utskriftsprosess. Om du " -"sender ei ikkje-PostScript-fil, må du kanskje avgjera om KDE skal gjera om fila " +"sender ei ikkje-PostScript-fil, må du kanskje avgjera om TDE skal gjera om fila " "til PostScript, eller om undersystemet for utskrift (som CUPS) skal gjera det. " "" @@ -693,12 +693,12 @@ msgstr "" msgid "" " Output File Name and Path: The \"Output file:\" shows you where " "your file will be saved if you decide to \"Print to File\" your job, using one " -"of the KDE Special Printers named \"Print to File (PostScript)\" or " +"of the TDE Special Printers named \"Print to File (PostScript)\" or " "\"Print to File (PDF)\". Choose a name and location that suits your need by " "using the button and/or editing the line on the right. " msgstr "" " Namn og stig til utfil: «Utfil:» viser kor fila vert lagra ved " -"valet «Skriv til fil» ved bruk av ein av KDE sine Spesielle skrivarar " +"valet «Skriv til fil» ved bruk av ein av TDE sine Spesielle skrivarar " "med namn som «Skriv til fil (PostScript)» eller «Skriv til fil (PDF)». Vel eit " "namn og stad som passar ved å bruka knappen og/eller rediger linja til høgre. " "" @@ -748,9 +748,9 @@ msgid "" "\"poster\" or \"pamphlet\" layout looks like you expected, without wasting " "paper first. It also lets you cancel the job if something looks wrong. " "

    Note: The preview feature (and therefore this checkbox) is only " -"visible for printjobs created from inside KDE applications. If you start " +"visible for printjobs created from inside TDE applications. If you start " "kprinter from the commandline, or if you use kprinter as a print command for " -"non-KDE applications (like Acrobat Reader, Firefox or OpenOffice), print " +"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " "preview is not available here. " msgstr "" " Førehandsvising Kryss av her viss du vil sjå ei førehandsvising av " @@ -897,7 +897,7 @@ msgid "" "secretaries who serve different bosses, etc.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-billing=...         # example: \"Marketing_Department\" or "
 "\"Joe_Doe\"

    " @@ -929,7 +929,7 @@ msgid "" "trays).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-hold-until=...      # example: \"indefinite\" or \"no-hold\"  "
 "

    " @@ -965,7 +965,7 @@ msgid "" "

    They contain any string you type into the line edit field.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-label=\"...\"      # example: \"Company Confidential\"
    " "

    " @@ -992,7 +992,7 @@ msgid "" "no other, higher prioritized one is present).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-priority=...   # example: \"10\" or \"66\" or \"99\"
    " "

    " @@ -1443,7 +1443,7 @@ msgid "" "

    The default value is 10, meaning that the font is scaled in a way that 10 " "characters per inch will be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o cpi=...          # example: \"8\" or \"12\"

    " msgstr "" @@ -1457,7 +1457,7 @@ msgid "" "

    The default value is 6, meaning that the font is scaled in a way that 6 " "lines per inch will be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o lpi=...         # example \"5\" or \"7\"

    " msgstr "" @@ -1471,7 +1471,7 @@ msgid "" "

    The default value is 1, meaning that only one column of text per page will " "be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o columns=...     # example: \"2\" or \"4\"

    " msgstr "" @@ -1487,11 +1487,11 @@ msgid "" "

    These settings control the appearance of text on printouts. They are only " "valid for printing text files or input directly through kprinter.

    " "

    Note: These settings have no effect whatsoever for other input " -"formats than text, or for printing from applications such as the KDE Advanced " +"formats than text, or for printing from applications such as the TDE Advanced " "Text Editor. (Applications in general send PostScript to the print system, and " "'kate' in particular has its own knobs to control the print output.

    . " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

         -o cpi=...         # example: \"8\" or \"12\"  "
 "
         -o lpi=...         # example: \"5\" or \"7\"  "
@@ -1504,9 +1504,9 @@ msgid ""
 "
    Margins
      "
 "
    These settings control the margins of printouts on the paper. They are not "
 "valid for  jobs originating from applications which define their own page "
-"layout internally and  send PostScript to KDEPrint (such as KOffice or "
+"layout internally and  send PostScript to TDEPrint (such as KOffice or "
 "OpenOffice.org). 
      "
-"
    When printing from KDE applications, such as KMail and Konqueror, or "
+"
    When printing from TDE applications, such as KMail and Konqueror, or "
 "printing an ASCII text  file through kprinter, you can choose your preferred "
 "margin settings here. 
      "
 "
    Margins may be set individually for each edge of the paper. The combo box at "
@@ -1515,7 +1515,7 @@ msgid ""
 "
    You can even use the mouse to grab one margin and drag it to the intended "
 "position (see the  preview picture on the right side). 
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o page-top=...      # example: \"72\"  "
 "
         -o page-bottom=...   # example: \"24\"  "
@@ -1536,7 +1536,7 @@ msgid ""
 "enscript      pre-filter on the Filters tab. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o prettyprint=true.  
     
      "
 msgstr ""
@@ -1550,7 +1550,7 @@ msgid ""
 "margins, though.) 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o prettyprint=false  
     
      "
 msgstr ""
@@ -1568,7 +1568,7 @@ msgid ""
 "enscript      pre-filter on the Filters tab. 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o prettyprint=true.  "
 "
         -o prettyprint=false  
     
      "
@@ -1633,7 +1633,7 @@ msgid ""
 "server via this editable list.  There are 3 purposes for this: "
 "
       "
 "
    • Use any current or future standard CUPS job option not supported by the  "
-"KDEPrint GUI. 
      •  "
+"TDEPrint GUI.  "
 "
    • Control any custom job option you may want to support in custom CUPS "
 "filters  and backends plugged into the CUPS filtering chain.
      •   "
 "
    • Send short messages to the operators of your production printers in your  "
@@ -1667,7 +1667,7 @@ msgid ""
 "
      Note: the fields must not include spaces, tabs or quotes. You may "
 "need to  double-click on a field to edit it. "
 "
      Warning: Do not use such standard CUPS option names which also can be "
-"used  through the KDEPrint GUI. Results may be  unpredictable if they conflict, "
+"used  through the TDEPrint GUI. Results may be  unpredictable if they conflict, "
 " or if they are sent multiple times. For all options supported by the GUI, "
 "please do use  the GUI. (Each GUI element's  'WhatsThis' names the related CUPS "
 "option name.) 
        "
@@ -1886,7 +1886,7 @@ msgid ""
 "colors defined in the HP-GL/2 reference manual from Hewlett Packard. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o blackplot=true  
        
        "
 msgstr ""
@@ -1906,7 +1906,7 @@ msgid ""
 "the HP-GL  to PostScript assumes the plot is ANSI E size. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:  "
 "
           -o fitplot=true   
       
        "
 msgstr ""
@@ -1923,7 +1923,7 @@ msgid ""
 "set inside  the plot file itself..
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:  "
 "
          -o penwidth=...   # example: \"2000\" or \"500\"  
       
        "
 msgstr ""
@@ -1931,11 +1931,11 @@ msgstr ""
 #: cups/kphpgl2page.cpp:85
 msgid ""
 "   HP-GL Print Options  "
-"
      All options on this page are only applicable if you use KDEPrint to send "
+"
      All options on this page are only applicable if you use TDEPrint to send "
 "HP-GL and  HP-GL/2 files to one of your printers. 
        "
 "
      HP-GL and HP-GL/2 are page description languages developed by "
 "Hewlett-Packard to drive  Pen Plotting devices. 
        "
-"
      KDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
+"
      TDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
 "it  on any installed printer. 
        "
 "
      Note 1: To print HP-GL files, start 'kprinter' and simply load the "
 "file into  the running kprinter.
       "
@@ -1944,7 +1944,7 @@ msgid ""
 "1.1.22).
        "
 "
        "
 "
        "
-"
      Additional hint for power users: These KDEPrint GUI elements "
+"
      Additional hint for power users: These TDEPrint GUI elements "
 "match with CUPS commandline job option parameters:  "
 "
           -o blackplot=...  # examples: \"true\" or \"false\"  "
 "
           -o fitplot=...    # examples: \"true\" or \"false\"  "
@@ -2182,7 +2182,7 @@ msgid ""
 "lighten the print. Values less than 100 will darken the print. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o brightness=...      # use range from \"0\" to \"200\"  
        
        "
 ""
@@ -2226,7 +2226,7 @@ msgid ""
 "Light-navy-blue       "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o hue=...     # use range from \"-360\" to \"360\"  
       
        "
 msgstr ""
@@ -2244,7 +2244,7 @@ msgid ""
 "make the colors extremely intense. 
       "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o saturation=...      # use range from \"0\" to \"200\"  
       
        "
 ""
@@ -2261,7 +2261,7 @@ msgid ""
 "preview. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o gamma=...      # use range from \"1\" to \"3000\"  
       
        "
 ""
@@ -2332,7 +2332,7 @@ msgid ""
 "printed.  Scaling in % of natural image size defaults to 100 %.  
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o natural-scaling=...     # range in  %  is 1....800  "
 "
         -o scaling=...             # range in  %  is 1....800  "
@@ -2380,7 +2380,7 @@ msgid ""
 "paper printout. Default  is 'center'. 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o position=...       # examples: \"top-left\" or \"bottom\"  
     "
 "
      "
@@ -3212,13 +3212,13 @@ msgstr "Br&uk eksternt program for førehandsvising"
 
 #: management/kmconfigpreview.cpp:44
 msgid ""
-"You can use an external preview program (PS viewer) instead of the KDE built-in "
-"preview system. Note that if the KDE default PS viewer (KGhostView) cannot be "
-"found, KDE tries automatically to find another external PostScript viewer"
+"You can use an external preview program (PS viewer) instead of the TDE built-in "
+"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be "
+"found, TDE tries automatically to find another external PostScript viewer"
 msgstr ""
 "Du kan bruka eit eksternt program for førehandsvising (PS-framvisar) i staden "
-"for det innebygde førehandsvisingssystemet i KDE. Legg merke til at dersom KDE "
-"ikkje finn standardprogrammet (KGhostView), prøver KDE automatisk å finna ein "
+"for det innebygde førehandsvisingssystemet i TDE. Legg merke til at dersom TDE "
+"ikkje finn standardprogrammet (KGhostView), prøver TDE automatisk å finna ein "
 "annan, ekstern PostScript-framvisar."
 
 #: management/kmwdrivertest.cpp:41
@@ -3286,8 +3286,8 @@ msgstr ""
 "
    %1
    "
 
 #: management/kaddprinterwizard.cpp:10
-msgid "Configure KDE Print"
-msgstr "Set opp KDE-utskrift"
+msgid "Configure TDE Print"
+msgstr "Set opp TDE-utskrift"
 
 #: management/kaddprinterwizard.cpp:11
 msgid "Configure print server"
@@ -3321,8 +3321,8 @@ msgstr ""
 "Kan ikkje starta opprettinga av drivardatabasen. Utføringa av %1 mislukkast."
 
 #: management/kmdbcreator.cpp:113
-msgid "Please wait while KDE rebuilds a driver database."
-msgstr "Vent litt medan KDE byggjer opp ein drivardatabase."
+msgid "Please wait while TDE rebuilds a driver database."
+msgstr "Vent litt medan TDE byggjer opp ein drivardatabase."
 
 #: management/kmdbcreator.cpp:114
 msgid "Driver Database"
@@ -3396,8 +3396,8 @@ msgid "Change..."
 msgstr "Endra …"
 
 #: management/kmconfigdialog.cpp:38
-msgid "KDE Print Configuration"
-msgstr "Oppsett av utskrift i KDE"
+msgid "TDE Print Configuration"
+msgstr "Oppsett av utskrift i TDE"
 
 #: management/kmwdriver.cpp:33
 msgid "Printer Model Selection"
@@ -3549,10 +3549,10 @@ msgstr " s"
 
 #: management/kmconfiggeneral.cpp:53
 msgid ""
-"This time setting controls the refresh rate of various KDE Print "
+"This time setting controls the refresh rate of various TDE Print "
 "components like the print manager and the job viewer."
 msgstr ""
-"Denne tidsinnstillinga styrer oppfriskingsraten på ymse KDE-utskriftskomponent "
+"Denne tidsinnstillinga styrer oppfriskingsraten på ymse TDE-utskriftskomponent "
 "som utskriftshandsamaren og jobbvisaren."
 
 #: management/kmconfiggeneral.cpp:57
@@ -3698,12 +3698,12 @@ msgstr ""
 
 #: management/kmconfigfonts.cpp:89
 msgid ""
-"When using font embedding you can select additional directories where KDE "
+"When using font embedding you can select additional directories where TDE "
 "should search for embeddable font files. By default, the X server font path is "
 "used, so adding those directories is not needed. The default search path should "
 "be sufficient in most cases."
 msgstr ""
-"Når du brukar innebyggjing av skrifter, kan du velja fleire katalogar der KDE "
+"Når du brukar innebyggjing av skrifter, kan du velja fleire katalogar der TDE "
 "skal leita etter skriftfiler som kan lagrast i PS-fila. Vanlegvis vert "
 "skriftsøkjestigen til X-tenaren bruka, så dei katalogane treng du ikke oppgje. "
 "I de fleste tilfella er den vanlege søkjestigen tilstrekkeleg."
@@ -4099,7 +4099,7 @@ msgid ""
 "
    "
 "
    We hope you'll enjoy this tool!
    "
 "
    "
-"The KDE printing team.
    "
+"The TDE printing team.
    "
 msgstr ""
 "
    Velkommen!
    "
 "
    "
@@ -4109,7 +4109,7 @@ msgstr ""
 "
    "
 "
    Me håpar du har nytte av dette verktøyet!
    "
 "
    "
-"Utskriftslaget i KDE
    "
+"Utskriftslaget i TDE
    "
 
 #: management/kmdriverdbwidget.cpp:51
 msgid "&PostScript printer"
@@ -4609,13 +4609,13 @@ msgid ""
 "  File Open button "
 "
    This button tries to open the highlighted file, so you can view or edit it "
 "before you send it to the printing system.
     "
-"
    If you open files, KDEPrint will use the application matching the MIME type "
+"
    If you open files, TDEPrint will use the application matching the MIME type "
 "of the file.
         "
 msgstr ""
 "Opna fil "
 "
    Knappen prøver å opna dei merkte filene slik at dei kan visast eller "
 "redigerast før dei vert sendt til utskrift.
     "
-"
    Om filer vert opna, vil KDE-utskrift bruka eit program som passar MIME-typen "
+"
    Om filer vert opna, vil TDE-utskrift bruka eit program som passar MIME-typen "
 "til fila.
         "
 
 #: kfilelist.cpp:82
@@ -4623,7 +4623,7 @@ msgid ""
 "  File List view "
 "
    This list displays all the files you selected for printing. You can see the "
 "file name(s), file path(s) and the file (MIME) type(s) as determined by "
-"KDEPrint. You may re-arrange the  initial order of the list  with the help of "
+"TDEPrint. You may re-arrange the  initial order of the list  with the help of "
 "the arrow buttons on the right.
     "
 "
    The files will be printed as a single job, in the same order as displayed in "
 "the list.
     "
@@ -4631,18 +4631,18 @@ msgid ""
 "locations. The files may be of multiple MIME types. The buttons on the right "
 "side let you add more files, remove already selected files from the list,  "
 "re-order the list (by moving files up or down), and open files. If you open "
-"files, KDEPrint will use the application matching the MIME type of the file.
     "
+"files, TDEPrint will use the application matching the MIME type of the file.
     "
 "    "
 msgstr ""
 "Fillistevising "
 "
    Lista viser alle filer som er valt for utskrift. Du kan sjå filnamna, "
-"filplasseringa og filene sine (MIME) typar avgjort av KDE-utskrift. "
+"filplasseringa og filene sine (MIME) typar avgjort av TDE-utskrift. "
 "Oppstartsrekkjefølgja i lista er rekkjefølgja som først blei valt. 
     "
 "
    Lista blir skrive ut i samme rekkjefølgje som vist.
     "
 "
    Merk: Du kan velja fleire filer. Filer kan vera plassert fleire "
 "stader. Filene kan ha ulike MIME-typar. Knappen på høgresida legg til fleire "
 "filer, fjernar merkte filer frå lista, endrar rekkjefølgja i lista (ved å "
-"flytta filer opp og ned) og opnar filer. Ved opning av filer vil KDE-utskrift "
+"flytta filer opp og ned) og opnar filer. Ved opning av filer vil TDE-utskrift "
 "bruka eit program som passer MIME-typen til fila.
    "
 
 #: kfilelist.cpp:103
@@ -4677,15 +4677,15 @@ msgstr "Tilpassingar"
 msgid ""
 " Print Subsystem Selection "
 "
    This combo box shows (and lets you select) a print subsystem to be used by "
-"KDEPrint. (This print subsystem must, of course, be installed inside your "
-"Operating System.) KDEPrint usually auto-detects the correct print subsystem by "
+"TDEPrint. (This print subsystem must, of course, be installed inside your "
+"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
 "itself upon first startup. Most Linux distributions have \"CUPS\", the "
 "Common UNIX Printing System. "
 msgstr ""
 "Val av utskriftssystem "
 "
    Kombinasjonsboksen viser (og muliggjer val av) eit undersystem for utskrift "
-"som vert bruka i KDE-utskrift. (Undersystemet for utskrift må vera installert "
-"som ein del av operativsystemet.) KDE-utskrift gjenkjenner det vanlegvis "
+"som vert bruka i TDE-utskrift. (Undersystemet for utskrift må vera installert "
+"som ein del av operativsystemet.) TDE-utskrift gjenkjenner det vanlegvis "
 "automatisk. Dei fleste linux-distribusjonar har «CUPS», "
 "Common Unix Printing System. "
 
@@ -4730,7 +4730,7 @@ msgid ""
 "
    Note. The number of available job options depends strongly on the "
 "actual  driver used for your print queue. 'Raw' "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.
          "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
      "
 msgstr ""
 
 #: driverview.cpp:71
@@ -4755,7 +4755,7 @@ msgid ""
 "
    Note. The number of available job options depends strongly on the "
 "actual  driver used for your print queue. 'Raw' "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.
      "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
      "
 msgstr ""
 
 #: kprinter.cpp:280
@@ -4813,8 +4813,8 @@ msgstr "Parallellport %1"
 
 #: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661
 #, c-format
-msgid "Unable to load KDE print management library: %1"
-msgstr "Kan ikkje lasta KDE-biblioteket for utskriftshandtering: %1"
+msgid "Unable to load TDE print management library: %1"
+msgstr "Kan ikkje lasta TDE-biblioteket for utskriftshandtering: %1"
 
 #: kmmanager.cpp:491 kxmlcommand.cpp:669
 msgid "Unable to find wizard object in management library."
@@ -4840,12 +4840,12 @@ msgstr "Skrivarkø over nettverk på %1"
 
 #: kmspecialmanager.cpp:53
 msgid ""
-"A file share/tdeprint/specials.desktop was found in your local KDE directory. "
-"This file probably comes from a previous KDE release and should be removed in "
+"A file share/tdeprint/specials.desktop was found in your local TDE directory. "
+"This file probably comes from a previous TDE release and should be removed in "
 "order to manage global pseudo printers."
 msgstr ""
-"Fila share/tdeprint/specials.desktop vart funnen i den lokale KDE-katalogen. "
-"Denne fila kjem sannsynlegvis frå ei tidlegare KDE-utgåve og bør fjernast slik "
+"Fila share/tdeprint/specials.desktop vart funnen i den lokale TDE-katalogen. "
+"Denne fila kjem sannsynlegvis frå ei tidlegare TDE-utgåve og bør fjernast slik "
 "at du kan handtera globale pseudoskrivarar."
 
 #: kprinterimpl.cpp:156
@@ -4872,10 +4872,10 @@ msgstr "Klarte ikkje starta barneprosess for utskrift. "
 
 #: kprinterimpl.cpp:281
 msgid ""
-"The KDE print server (tdeprintd) could not be contacted. Check that this "
+"The TDE print server (tdeprintd) could not be contacted. Check that this "
 "server is running."
 msgstr ""
-"Klarte ikkje kontakta KDE-utskriftstenaren (tdeprintd"
+"Klarte ikkje kontakta TDE-utskriftstenaren (tdeprintd"
 "). Sjå til at tenaren køyrer."
 
 #: kprinterimpl.cpp:283
@@ -4917,11 +4917,11 @@ msgstr ""
 msgid ""
 "The MIME type %1 is not supported as input of the filter chain (this may happen "
 "with non-CUPS spoolers when performing page selection on a non-PostScript "
-"file). Do you want KDE to convert the file to a supported format?
    "
+"file). Do you want TDE to convert the file to a supported format?
    "
 msgstr ""
 "MIME-typen %1 er ikkje støtta som inntype på filterkjeda. (Dette kan henda med "
 "andre utskriftssystem enn CUPS når du vil velja sider med "
-"ikkje-PostScript-filer.) Vil du at KDE skal konvertera fila til eit format som "
+"ikkje-PostScript-filer.) Vil du at TDE skal konvertera fila til eit format som "
 "er støtta?
    "
 
 #: kprinterimpl.cpp:389 kprinterimpl.cpp:509
@@ -4971,22 +4971,22 @@ msgid ""
 "The file format  %1  is not directly supported by the current "
 "print system. You now have 3 options: "
 "
       "
-"
    •  KDE can attempt to convert this file automatically to a supported format. "
+"
    •  TDE can attempt to convert this file automatically to a supported format. "
 "(Select Convert) 
      • "
 "
    •  You can try to send the file to the printer without any conversion. "
 "(Select Keep) 
      • "
 "
    •  You can cancel the printjob. (Select Cancel) 
     "
-"Do you want KDE to attempt and convert this file to %2?    "
+"Do you want TDE to attempt and convert this file to %2?"
 msgstr ""
 "Filformatet %1 er ikkje direkte støtta av utskriftssystemet. Du "
 "har no tre val: "
 "
       "
-"
    • KDE kan prøva å konvertera fila automatisk til eit format som er støtta. "
+"
    • TDE kan prøva å konvertera fila automatisk til eit format som er støtta. "
 "(Vel Konverter.)
      •  "
 "
    • Du kan prøva å senda fila til skrivaren utan å konvertera henne. (Vel "
 "ikkje rør.)
      •  "
 "
    • Du kan avbryta utskriftsjobben. (Vel Avbryt.)
      •  
    "
-"Vil du at KDE skal prøva å konvertera fila til %2?    "
+"Vil du at TDE skal prøva å konvertera fila til %2?"
 
 #: kprinterimpl.cpp:518
 msgid ""
@@ -5092,7 +5092,7 @@ msgid ""
 "installed.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o PageSize=...         # examples: \"A4\" or \"Letter\"  
     
      "
 ""
@@ -5107,7 +5107,7 @@ msgid ""
 "installed. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o MediaType=...        # example: \"Transparency\"  
     
      "
 msgstr ""
@@ -5122,7 +5122,7 @@ msgid ""
 "installed. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
 "
     
      "
@@ -5148,7 +5148,7 @@ msgid ""
 "down.
    • The icon changes according to your selection.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o orientation-requested=...       # examples: \"landscape\" or "
 "\"reverse-portrait\"

    " @@ -5183,7 +5183,7 @@ msgid "" "if you turn it over the short edge. (Some printer drivers name this mode " "duplex-tumbled). " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
 "

    " @@ -5208,7 +5208,7 @@ msgid "" "

    CUPS comes with a selection of banner pages.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
 "

    " @@ -5229,7 +5229,7 @@ msgid "" "sheet in both places, your printout will not look as you intended.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o number-up=...        # examples: \"2\" or \"4\"

    " msgstr "" @@ -5339,11 +5339,11 @@ msgstr "%1: Køyringa var mislukka. Melding:

    %2

    " #: tdeprintd.cpp:176 msgid "" -"Some of the files to print are not readable by the KDE print daemon. This may " +"Some of the files to print are not readable by the TDE print daemon. This may " "happen if you are trying to print as a different user to the one currently " "logged in. To continue printing, you need to provide root's password." msgstr "" -"KDE-utskriftssystemet kan ikkje lesa enkelte av filene som skal skrivast ut. " +"TDE-utskriftssystemet kan ikkje lesa enkelte av filene som skal skrivast ut. " "Dette kan skje dersom du prøver å skriva ut som ein annan brukar enn den som er " "logga inn. For å halda fram må du oppgje root-passordet." @@ -5394,15 +5394,15 @@ msgstr "" #: kpcopiespage.cpp:55 msgid "" " Current Page: Select \"Current\" " -"if you want to print the page currently visible in your KDE application.

    " -"

    Note: this field is disabled if you print from non-KDE applications " -"like Mozilla or OpenOffice.org, since here KDEPrint has no means to determine " +"if you want to print the page currently visible in your TDE application.

    " +"

    Note: this field is disabled if you print from non-TDE applications " +"like Mozilla or OpenOffice.org, since here TDEPrint has no means to determine " "which document page you are currently viewing.

    " msgstr "" "Denne sida: Vel «Denne» viss du vil skriva ut den sida som " -"no vert vist i KDE-applikasjonen din.

    " -"

    Merk: dette feltet er slått av viss du skriv ut frå ikkje-KDE " -"applikasjonar som Mozilla eller OpenOffice.org, fordi då har ikkje KDEPrint " +"no vert vist i TDE-applikasjonen din.

    " +"

    Merk: dette feltet er slått av viss du skriv ut frå ikkje-TDE " +"applikasjonar som Mozilla eller OpenOffice.org, fordi då har ikkje TDEPrint " "høve til å finna ut kva side du ser på no.

    " #: kpcopiespage.cpp:60 @@ -5415,7 +5415,7 @@ msgid "" "document.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-ranges=...     # example: \"4,6,10-13,17,20,23-25\"
    " "

    " @@ -5444,7 +5444,7 @@ msgid "" "model).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-set=...        # example: \"odd\" or \"even\"

    " "    " @@ -5470,7 +5470,7 @@ msgid "" "

    The 'Copies' setting defaults to 1.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

         -o copies=...            # examples: \"5\" or \"42\"  "
 "
         -o outputorder=...       # example:  \"reverse\" "
@@ -5486,7 +5486,7 @@ msgid ""
 "and down arrows. You can also type the figure directly into the box. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o copies=...            # examples: \"5\" or \"42\"  
     
      "
 ""
@@ -5506,7 +5506,7 @@ msgid ""
 "3-3-3-...\".
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o Collate=...           # example:  \"true\" or \"false\"  
     
      "
 ""
@@ -5532,7 +5532,7 @@ msgid ""
 "checkbox at the same time. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o outputorder=...       # example:  \"reverse\"  
     
      "
 msgstr ""
@@ -5623,18 +5623,18 @@ msgstr ""
 
 #: kprintpreview.cpp:300
 msgid ""
-"Preview failed: neither the internal KDE PostScript viewer (KGhostView) nor any "
+"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any "
 "other external PostScript viewer could be found."
 msgstr ""
 "Førehandsvising mislukkast: Fann ikkje verken den interne PostScript-visaren i "
-"KDE (KGhostView) eller nokon annan ekstern PostScript-visar."
+"TDE (KGhostView) eller nokon annan ekstern PostScript-visar."
 
 #: kprintpreview.cpp:304
 #, c-format
 msgid ""
-"Preview failed: KDE could not find any application to preview files of type %1."
+"Preview failed: TDE could not find any application to preview files of type %1."
 msgstr ""
-"Førehåndsvising feila: KDE fant ikkje eit program for å visa fila av type %1."
+"Førehåndsvising feila: TDE fant ikkje eit program for å visa fila av type %1."
 
 #: kprintpreview.cpp:314
 #, c-format
@@ -5699,7 +5699,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-top=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     
      "
@@ -5720,7 +5720,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5741,7 +5741,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-left=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5762,7 +5762,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-right=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5790,7 +5790,7 @@ msgid ""
 "The margin setting does not work if you load such files directly into  "
 "kprinter, which have their print margins hardcoded internally, like as most  "
 "PDF or PostScript files. It works for all ASCII text files however. It also may "
-"not  work with non-KDE applications which fail to  fully utilize the KDEPrint "
+"not  work with non-TDE applications which fail to  fully utilize the TDEPrint "
 "framework, such as OpenOffice.org. 
      "
 msgstr ""
 
@@ -5845,14 +5845,14 @@ msgstr "JCL"
 #: kmvirtualmanager.cpp:161
 msgid ""
 "You are about to set a pseudo-printer as your personal default. This "
-"setting is specific to KDE and will not be available outside KDE applications. "
+"setting is specific to TDE and will not be available outside TDE applications. "
 "Note that this will only make your personal default printer as undefined for "
-"non-KDE applications and should not prevent you from printing normally. Do you "
+"non-TDE applications and should not prevent you from printing normally. Do you "
 "really want to set %1 as your personal default?"
 msgstr ""
 "Du er i ferd med å velja ein pseudo-skrivar som personleg standard. Denne "
-"innstillinga vil berre gjelda for KDE og kan ikkje brukast frå "
-"ikkje-KDE-program. Det vil føra til at du ikkje har nokon standardskrivar i "
+"innstillinga vil berre gjelda for TDE og kan ikkje brukast frå "
+"ikkje-TDE-program. Det vil føra til at du ikkje har nokon standardskrivar i "
 "andre program, men du kan likevel skriva ut på vanleg måte. Vil du verkeleg ha "
 "%1 som personleg standard?"
 
@@ -5869,7 +5869,7 @@ msgid ""
 "here, the 'Poster Printing' filter will be auto-loaded in  the "
 "'Filters' tab of this dialog. 
     "
 "
    This tab is only visible if the external 'poster' "
-"utility is  discovered by KDEPrint on your system. ['poster' "
+"utility is  discovered by TDEPrint on your system. ['poster' "
 "is a commandline  utility that enables you to convert PostScript files into "
 "tiled printouts  which allow for oversized appearance of the stitched-together "
 "tiles.] 
     "
@@ -5877,7 +5877,7 @@ msgid ""
 "must use a patched version of 'poster'. Ask your operating system vendor to  "
 "provide a patched version of 'poster' if he does not already. 
     "
 "
    Additional hint for power users: A patched version of 'poster' is  "
-"available from the KDEPrint Website  "
+"available from the TDEPrint Website  "
 "at http://printing.kde.org/downloads/.  The direct link to the patched source tarball is   Add Filter button "
 "
    This button calls a little dialog to let you select a filter here. 
     "
 "
    Note 1: You can chain different filters as long as you make  sure "
-"that the output of one fits as input of the next. (KDEPrint  checks your "
+"that the output of one fits as input of the next. (TDEPrint  checks your "
 "filtering chain and will warn you if you fail to do so.
      "
 "
    Note 2: The filters you define here are applied to your jobfile  "
 "before it is handed downstream to your spooler and print  subsystem "
@@ -6098,7 +6098,7 @@ msgid ""
 "
    This field shows some general info about the selected filter.  Amongst them "
 "are:  "
 "
        "
-"
    • the filter name (as displayed in the KDEPrint user interface); "
+"
    • the filter name (as displayed in the TDEPrint user interface); "
 "
      •   "
 "
    • the filter requirements (that is the external program that needs  "
 "to present and executable on this system); 
      •   "
@@ -6115,7 +6115,7 @@ msgid ""
 "  Filtering Chain (if enabled, is run before "
 "actual  job submission to print system) "
 "
      This field shows which filters are currently selected to act as "
-"'pre-filters'  for KDEPrint. Pre-filters are processing the print files "
+"'pre-filters'  for TDEPrint. Pre-filters are processing the print files "
 "before they are  send downstream to your real print subsystem. 
        "
 "
      The list shown in this field may be empty (default). 
        "
 "
      The pre-filters act on the printjob in the order they are listed (from top "
@@ -6125,13 +6125,13 @@ msgid ""
 "example: if your file is ASCII text, and you want the  output being processed "
 "by the 'Multipage per Sheet' filter, the first filter must be  one that "
 "processes ASCII into PostScript. 
        "
-"
      KDEPrint can utilize any external filtering program which you may "
+"
      TDEPrint can utilize any external filtering program which you may "
 "find useful  through this interface. 
        "
-"
      KDEPrint ships preconfigured with support for a selection of common filters. "
-"These  filters however need to be  installed independently from KDEPrint. These "
-"pre-filters work for all print subsystems supported by KDEPrint (such "
+"
      TDEPrint ships preconfigured with support for a selection of common filters. "
+"These  filters however need to be  installed independently from TDEPrint. These "
+"pre-filters work for all print subsystems supported by TDEPrint (such "
 "as CUPS, LPRng and LPD), because they are not depending on these.
       ."
-"
       Amongst the pre-configured filters shipping with KDEPrint are: 
        "
+"
       Amongst the pre-configured filters shipping with TDEPrint are: 
        "
 "
          "
 "
      • the Enscript text filter  
        •   "
 "
      • a Multiple Pages per Sheet filter  "
@@ -6142,7 +6142,7 @@ msgid ""
 "click on the funnel icon (topmost on  the right icon column group) and "
 "proceed. 
         "
 "
        Please click on the other elements of this dialog to learn more about the "
-"KDEPrint  pre-filters.  
         "
+"TDEPrint  pre-filters.  
         "
 msgstr ""
 
 #: kpfilterpage.cpp:125
@@ -6191,7 +6191,7 @@ msgid ""
 "
          "
 "
        • Color and
          •   "
 "
        • Grayscale
          Note: This selection field may be grayed "
-"out and made inactive.  This happens if KDEPrint can not retrieve  enough "
+"out and made inactive.  This happens if TDEPrint can not retrieve  enough "
 "information about your print file. In this case the embedded color- or "
 "grayscale information  of your printfile, and the default handling of the "
 "printer take precedence.  "
-- 
cgit v1.2.3