From 8be002f4b0369dff86b93192190f0d2f081d26dc Mon Sep 17 00:00:00 2001 From: TDE Weblate Date: Sat, 15 Dec 2018 19:30:01 +0000 Subject: Update translation files Updated by Update PO files to match POT (msgmerge) hook in Weblate. --- tde-i18n-th/messages/tdeadmin/kcmlilo.po | 341 +++++++++++++++---------------- 1 file changed, 163 insertions(+), 178 deletions(-) (limited to 'tde-i18n-th/messages/tdeadmin') diff --git a/tde-i18n-th/messages/tdeadmin/kcmlilo.po b/tde-i18n-th/messages/tdeadmin/kcmlilo.po index e09f3b29593..3a0cd16cc66 100644 --- a/tde-i18n-th/messages/tdeadmin/kcmlilo.po +++ b/tde-i18n-th/messages/tdeadmin/kcmlilo.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: kcmlilo\n" -"POT-Creation-Date: 2014-09-29 12:06-0500\n" +"POT-Creation-Date: 2018-12-13 14:15+0100\n" "PO-Revision-Date: 2005-11-24 11:27+0700\n" "Last-Translator: Thanomsub Noppaburana \n" "Language-Team: Thai \n" @@ -15,6 +15,18 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11\n" +#: _translatorinfo:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "ถนอมทรัพย์ นพบูรณ์" + +#: _translatorinfo:2 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "donga_n@yahoo.com" + #: kde-qt-common/EditWidget.cpp:43 msgid "Select..." msgstr "เลือก..." @@ -33,17 +45,15 @@ msgstr "ติดตั้งบูตเรคอร์ดไปยังได #: kde-qt-common/general.cpp:55 msgid "" -"Select the drive or partition you want to install the LILO boot loader to here. " -"Unless you intend to use other boot managers in addition to LILO, this should " -"be the MBR (master boot record) of your boot drive." -"
In this case, you should probably select /dev/hda " -"if your boot drive is an IDE drive or /dev/sda " -"if your boot drive is SCSI." +"Select the drive or partition you want to install the LILO boot loader to " +"here. Unless you intend to use other boot managers in addition to LILO, this " +"should be the MBR (master boot record) of your boot drive.
In this case, " +"you should probably select /dev/hda if your boot drive is an IDE " +"drive or /dev/sda if your boot drive is SCSI." msgstr "" -"เลือกไดรฟ์หรือพาร์ติชันที่คุณต้องการให้ติดตั้งตัวเลือกการบูต LILO ที่นี่ " -"โดยปกติควรจะเป็นที่ MBR (master boot record) ของไดรฟ์ของคุณ " -"
ซึ่งควรเลือก /dev/hda ถ้าไดรฟ์ของคุณเป็นแบบ IDE หรือเลือก " -"/dev/sda ถ้าไดรฟ์ของคุณเป็นแบบ SCSI" +"เลือกไดรฟ์หรือพาร์ติชันที่คุณต้องการให้ติดตั้งตัวเลือกการบูต LILO ที่นี่ โดยปกติควรจะเป็นที่ MBR " +"(master boot record) ของไดรฟ์ของคุณ
ซึ่งควรเลือก /dev/hda " +"ถ้าไดรฟ์ของคุณเป็นแบบ IDE หรือเลือก /dev/sda ถ้าไดรฟ์ของคุณเป็นแบบ SCSI" #: kde-qt-common/general.cpp:58 msgid "Boot the default kernel/OS &after:" @@ -55,11 +65,11 @@ msgstr "/10 วินาที" #: kde-qt-common/general.cpp:64 msgid "" -"LILO will wait the amount of time specified here before booting the kernel (or " -"OS) marked as default in the Images tab." +"LILO will wait the amount of time specified here before booting the kernel " +"(or OS) marked as default in the Images tab." msgstr "" -"เวลาที่ LILO จะทำการคอย ก่อนที่จะทำการบูตเคอร์เนล (หรือโอเอส) ที่ถูกตั้งเป็น " -"ค่าปริยาย ในแท็บ อิมเมจ" +"เวลาที่ LILO จะทำการคอย ก่อนที่จะทำการบูตเคอร์เนล (หรือโอเอส) ที่ถูกตั้งเป็น ค่าปริยาย ในแท็บ อิมเมจ" #: kde-qt-common/general.cpp:67 msgid "Use &linear mode" @@ -67,17 +77,15 @@ msgstr "ใช้โหมด linear" #: kde-qt-common/general.cpp:69 msgid "" -"Check this box if you want to use the linear mode." -"
Linear mode tells the boot loader the location of kernels in linear " -"addressing rather than sector/head/cylinder." -"
linear mode is required for some SCSI drives, and shouldn't hurt unless " -"you're planning to create a boot disk to be used with a different computer." -"
See the lilo.conf man page for details." +"Check this box if you want to use the linear mode.
Linear mode tells the " +"boot loader the location of kernels in linear addressing rather than sector/" +"head/cylinder.
linear mode is required for some SCSI drives, and " +"shouldn't hurt unless you're planning to create a boot disk to be used with " +"a different computer.
See the lilo.conf man page for details." msgstr "" -"เลือกตัวเลือกนี้ หากคุณต้องการใช้โหมด Linear" -"
โหมด Linear นี้ จะบอกให้ตัวจัดการการบูตถึงตำแหน่งของเคอร์เนล แบบลิเนียร์ " -"แทนการใช้ตำแหน่ง เซกเตอร์/หัวอ่าน/ไซลินเดอร์" -"
โหมด Linear นี้ อาจจำเป็นต้องใช้ในไดร์ฟแบบ SCSI บางตัว " +"เลือกตัวเลือกนี้ หากคุณต้องการใช้โหมด Linear
โหมด Linear นี้ " +"จะบอกให้ตัวจัดการการบูตถึงตำแหน่งของเคอร์เนล แบบลิเนียร์ แทนการใช้ตำแหน่ง เซกเตอร์/หัวอ่าน/" +"ไซลินเดอร์
โหมด Linear นี้ อาจจำเป็นต้องใช้ในไดร์ฟแบบ SCSI บางตัว " "และคุณควรจะสร้างแผ่นบูตระบบ หากคุณต้องใช้เครื่องคอมพิวเตอร์อื่น " "
ดูรายละเอียดเพิ่มเติมที่หน้าคู่มือของ lilo.conf" @@ -87,14 +95,13 @@ msgstr "ใช้โหมด compact" #: kde-qt-common/general.cpp:72 msgid "" -"Check this box if you want to use the compact mode." -"
The compact mode tries to merge read requests for adjacent sectors into a " -"single read request. This reduces load time and keeps the boot map smaller, but " -"will not work on all systems." +"Check this box if you want to use the compact mode.
The compact mode " +"tries to merge read requests for adjacent sectors into a single read " +"request. This reduces load time and keeps the boot map smaller, but will not " +"work on all systems." msgstr "" -"เลือกตัวเลือกนี้ หากคุณต้องการใช้งานในโหมด compact" -"
โหมด compact นี้ จะพยายามรวมการอ่านที่ร้องขอมา " -"ให้เป็นการอ่านตำแหน่งเซกเตอร์เพียงครั้งเดียว ซึ่งจะช่วยลดเวลา " +"เลือกตัวเลือกนี้ หากคุณต้องการใช้งานในโหมด compact
โหมด compact นี้ " +"จะพยายามรวมการอ่านที่ร้องขอมา ให้เป็นการอ่านตำแหน่งเซกเตอร์เพียงครั้งเดียว ซึ่งจะช่วยลดเวลา " "และทำให้ตารางการบูตมีขนาดเล็กลง แต่อาจจะไม่สามารถทำงานได้บนบางระบบ" #: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85 @@ -104,13 +111,12 @@ msgstr "บันทึกบรรทัดคำสั่งการบูต #: kde-qt-common/general.cpp:78 msgid "" "Checking this box enables automatic recording of boot command lines as the " -"defaults for the following boots. This way, lilo \"locks\" on a choice until it " -"is manually overridden.\n" +"defaults for the following boots. This way, lilo \"locks\" on a choice until " +"it is manually overridden.\n" "This sets the lock option in lilo.conf." msgstr "" -"เปิดใช้ตัวเลือกนี้ เพื่อเปิดใช้การบันทึกบรรทัดคำสั่งการบูต " -"เป็นค่าปริยายโดยอัตโนมัติ สำหรับการบูตเหล่านี้ ด้วยวิธีนี้ lilo จะทำการ " -"\"ล็อค\" ข้อเลือก จนกว่าจะมีการเลือกเอง\n" +"เปิดใช้ตัวเลือกนี้ เพื่อเปิดใช้การบันทึกบรรทัดคำสั่งการบูต เป็นค่าปริยายโดยอัตโนมัติ " +"สำหรับการบูตเหล่านี้ ด้วยวิธีนี้ lilo จะทำการ \"ล็อค\" ข้อเลือก จนกว่าจะมีการเลือกเอง\n" "ซึ่งนี่เป็นการตั้งค่าตัวเลือก lock ในแฟ้ม lilo.conf นั่นเอง" #: kde-qt-common/general.cpp:79 kde/Details.cpp:84 qt/Details.cpp:87 @@ -120,20 +126,18 @@ msgstr "ห้ามการใช้พารามิเตอร์" #: kde-qt-common/general.cpp:82 msgid "" "If this box is checked, a password (entered below) is required only if any " -"parameters are changed (i.e. the user can boot linux, but not " -"linux single or linux init=/bin/sh).\n" -"This sets the restricted option in lilo.conf." -"
This sets a default for all Linux kernels you want to boot. If you need a " -"per-kernel setting, go to the Operating systems tab and select " -"Details." +"parameters are changed (i.e. the user can boot linux, but not " +"linux single or linux init=/bin/sh).\n" +"This sets the restricted option in lilo.conf.
This sets a default " +"for all Linux kernels you want to boot. If you need a per-kernel setting, go " +"to the Operating systems tab and select Details." msgstr "" "หากเปิดใช้ตัวเลือกนี้ จะมีความต้องการใช้รหัสผ่าน (โดยเติมด้านล่างนี้) " -"หากต้องการเปลี่ยนพารามิเตอร์การบูต (เช่น ผู้ใช้สามารถบูต linux " -"ได้ แต่ไม่ให้บูต linux single หรือ linux init=/bin/sh)\n" -"ซึ่งนี่เป็นการตั้งค่าตัวเลือก restricted ในแฟ้ม lilo.conf นั่นเอง" -"
การตั้งค่านี้ จะถูกใช้สำหรับเคอร์เนลลินุกซ์ทุกตัวที่คุณต้องการบูต " -"หากคุณต้องการตั้งค่าแยกเคอร์เนลแต่ละตัว ให้ไปที่แท็บ ระบบปฏิบัติการ " -"และเลือก รายละเอียด" +"หากต้องการเปลี่ยนพารามิเตอร์การบูต (เช่น ผู้ใช้สามารถบูต linux ได้ แต่ไม่ให้บูต " +"linux single หรือ linux init=/bin/sh)\n" +"ซึ่งนี่เป็นการตั้งค่าตัวเลือก restricted ในแฟ้ม lilo.conf นั่นเอง
การตั้งค่านี้ " +"จะถูกใช้สำหรับเคอร์เนลลินุกซ์ทุกตัวที่คุณต้องการบูต หากคุณต้องการตั้งค่าแยกเคอร์เนลแต่ละตัว " +"ให้ไปที่แท็บ ระบบปฏิบัติการ และเลือก รายละเอียด" #: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93 msgid "Require &password:" @@ -145,20 +149,17 @@ msgid "" "above is checked, the password is required for additional parameters only." "
WARNING: The password is stored in clear text in /etc/lilo.conf. " "You'll want to make sure nobody untrusted can read this file. Also, you " -"probably don't want to use your normal/root password here." -"
This sets a default for all Linux kernels you want to boot. If you need a " -"per-kernel setting, go to the Operating systems tab and select " -"Details." +"probably don't want to use your normal/root password here.
This sets a " +"default for all Linux kernels you want to boot. If you need a per-kernel " +"setting, go to the Operating systems tab and select Details." msgstr "" -"เติมรหัสผ่านที่ต้องการใช้สำหรับการบูต (หากเปิดใช้) ที่นี่ หากตัวเลือก " -"ห้ามการใช้พารามิเตอร์ ถูกเปิดใช้งาน จะมีความต้องการรหัสผ่าน " -"สำหรับการเติมพารามิเตอร์เท่านั้นเอง" -"
คำเตือน: รหัสผ่านนี้ จะถูกเก็บไว้แบบข้อความธรรมดาในแฟ้ม " -"/etc/lilo.conf คุณต้องแน่ใจว่า จะไม่มีใครอื่น สามารถเรียกดูแฟ้มนี้ได้ และแน่นอน " -"คุณก็ไม่ควรจะใช้รหัสผ่านของผู้ดูแลระบบสำหรับตัวเลือกนี้ด้วย" -"
การตั้งค่านี้ จะถูกใช้สำหรับเคอร์เนลลินุกซ์ทุกตัวที่คุณต้องการบูต " -"หากคุณต้องการตั้งค่าแยกเคอร์เนลแต่ละตัว ให้ไปที่แท็บ ระบบปฏิบัติการ " -"และเลือก รายละเอียด" +"เติมรหัสผ่านที่ต้องการใช้สำหรับการบูต (หากเปิดใช้) ที่นี่ หากตัวเลือก ห้ามการใช้พารามิเตอร์ ถูกเปิดใช้งาน จะมีความต้องการรหัสผ่าน สำหรับการเติมพารามิเตอร์เท่านั้นเอง
คำเตือน:" +" รหัสผ่านนี้ จะถูกเก็บไว้แบบข้อความธรรมดาในแฟ้ม /etc/lilo.conf คุณต้องแน่ใจว่า " +"จะไม่มีใครอื่น สามารถเรียกดูแฟ้มนี้ได้ และแน่นอน " +"คุณก็ไม่ควรจะใช้รหัสผ่านของผู้ดูแลระบบสำหรับตัวเลือกนี้ด้วย
การตั้งค่านี้ " +"จะถูกใช้สำหรับเคอร์เนลลินุกซ์ทุกตัวที่คุณต้องการบูต หากคุณต้องการตั้งค่าแยกเคอร์เนลแต่ละตัว " +"ให้ไปที่แท็บ ระบบปฏิบัติการ และเลือก รายละเอียด" #: kde-qt-common/general.cpp:97 msgid "&Default graphics mode on text console:" @@ -166,21 +167,18 @@ msgstr "โหมดกราฟิกโดยปริยายบนคอน #: kde-qt-common/general.cpp:100 msgid "" -"You can select the default graphics mode here." -"
If you intend to use a VGA graphics mode, you must compile the kernel with " -"support for framebuffer devices. The ask setting brings up a prompt at " -"boot time." -"
This sets a default for all Linux kernels you want to boot. If you need a " -"per-kernel setting, go to the Operating systems tab and select " -"Details." +"You can select the default graphics mode here.
If you intend to use a VGA " +"graphics mode, you must compile the kernel with support for framebuffer " +"devices. The ask setting brings up a prompt at boot time.
This " +"sets a default for all Linux kernels you want to boot. If you need a per-" +"kernel setting, go to the Operating systems tab and select " +"Details." msgstr "" -"คุณสามารถเลือกโหมดกราฟฟิกโดยปริยายได้ที่นี่" -"
หากคุณต้องการใช้โหมดกราฟิก VGA คุณต้องคอมไพล์เคอร์เนล " -"ให้สนับสนุนอุปกรณ์แบบเฟรมบัฟเฟอร์ หากตั้งค่า ask " -"ด้วย จะทำให้มีการถามเมื่อทำการบูตทุกครั้ง" -"
การตั้งค่านี้ จะถูกใช้สำหรับเคอร์เนลลินุกซ์ทุกตัวที่คุณต้องการบูต " -"หากคุณต้องการตั้งค่าแยกเคอร์เนลแต่ละตัว ให้ไปที่แท็บ ระบบปฏิบัติการ " -"และเลือก รายละเอียด" +"คุณสามารถเลือกโหมดกราฟฟิกโดยปริยายได้ที่นี่
หากคุณต้องการใช้โหมดกราฟิก VGA " +"คุณต้องคอมไพล์เคอร์เนล ให้สนับสนุนอุปกรณ์แบบเฟรมบัฟเฟอร์ หากตั้งค่า ask ด้วย " +"จะทำให้มีการถามเมื่อทำการบูตทุกครั้ง
การตั้งค่านี้ " +"จะถูกใช้สำหรับเคอร์เนลลินุกซ์ทุกตัวที่คุณต้องการบูต หากคุณต้องการตั้งค่าแยกเคอร์เนลแต่ละตัว " +"ให้ไปที่แท็บ ระบบปฏิบัติการ และเลือก รายละเอียด" #: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48 msgid "default" @@ -294,22 +292,20 @@ msgstr "เข้าสู่พร้อมต์ของ LILO โดยอั msgid "" "If this box is checked, LILO goes to the LILO prompt whether or not a key is " "pressed. If it is turned off, LILO boots the default operating system unless " -"shift is pressed (in that case, it goes to the LILO prompt)." -"
This sets the prompt option in lilo.conf." +"shift is pressed (in that case, it goes to the LILO prompt).
This sets " +"the prompt option in lilo.conf." msgstr "" -"หากเลือกใช้ตัวเลือกนี้ LILO จะไปยังพร้อมต์ของ LILO " -"ไม่ว่าจะมีการกดปุ่มพิมพ์หรือไม่ หากปิดการใช้งาน LILO " -"จะทำการบูตระบบปฏิบัติการปริยาย จนกว่าจะมีการกดปุ่ม shift " -"(ซึ่งเป็นการเรียกพร้อมต์ของ LILO นั่นเอง)" -"
และนี่ ก็เป็นการตั้งค่าตัวเลือก prompt ในแฟ้ม lilo.conf นั่นเอง" +"หากเลือกใช้ตัวเลือกนี้ LILO จะไปยังพร้อมต์ของ LILO ไม่ว่าจะมีการกดปุ่มพิมพ์หรือไม่ " +"หากปิดการใช้งาน LILO จะทำการบูตระบบปฏิบัติการปริยาย จนกว่าจะมีการกดปุ่ม shift " +"(ซึ่งเป็นการเรียกพร้อมต์ของ LILO นั่นเอง)
และนี่ ก็เป็นการตั้งค่าตัวเลือก prompt " +"ในแฟ้ม lilo.conf นั่นเอง" #: kde-qt-common/images.cpp:53 msgid "" "This is the list of kernels and operating systems you can currently boot. " "Select which one you want to edit here." msgstr "" -"นี่เป็นรายการของเคอร์เนล และระบบปฏิบัติการที่คุณสามารถบูตได้ในตอนนี้ " -"เลือกตัวที่คุณต้องการแก้ไขที่นี่" +"นี่เป็นรายการของเคอร์เนล และระบบปฏิบัติการที่คุณสามารถบูตได้ในตอนนี้ เลือกตัวที่คุณต้องการแก้ไขที่นี่" #: kde-qt-common/images.cpp:59 kde-qt-common/images.cpp:281 msgid "&Kernel:" @@ -334,8 +330,8 @@ msgstr "รากของระบบไฟล์:" #: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189 msgid "" -"Enter the root filesystem (i.e. the partition that will be mounted as / at boot " -"time) for the kernel you want to boot here." +"Enter the root filesystem (i.e. the partition that will be mounted as / at " +"boot time) for the kernel you want to boot here." msgstr "" "เติมรากของระบบไฟล์ (เช่น พาร์ติชันที่จะเมาท์เป็น / เมื่อทำการบูต) " "สำหรับเคอร์เนลที่คุณต้องการใช้ในการบูตที่นี่" @@ -350,8 +346,7 @@ msgid "" "filename here. Leave this field blank if you don't intend to use an initial " "ramdisk for this kernel." msgstr "" -"ถ้าคุณต้องการใช้แรมดิสก์เริ่มระบบ (initrd) สำหรับเคอร์เนลนี้ " -"ให้เติมชื่อแฟ้มที่นี่ ซึ่งหากไม่เติม " +"ถ้าคุณต้องการใช้แรมดิสก์เริ่มระบบ (initrd) สำหรับเคอร์เนลนี้ ให้เติมชื่อแฟ้มที่นี่ ซึ่งหากไม่เติม " "ก็จะไม่มีการใช้งานแรมดิสก์เริ่มระบบสำหรับเคอร์เนลนี้" #: kde-qt-common/images.cpp:71 @@ -360,12 +355,11 @@ msgstr "พารามิเตอร์พิเศษ:" #: kde-qt-common/images.cpp:72 msgid "" -"Enter any extra parameters you wish to pass to the kernel here. Usually, this " -"can be left blank." -"
This sets the append option in lilo.conf." +"Enter any extra parameters you wish to pass to the kernel here. Usually, " +"this can be left blank.
This sets the append option in lilo.conf." msgstr "" -"เติมพารามิเตอร์อื่นๆ ที่ต้องการผ่านไปให้เคอร์เนลที่นี่ ซึ่งปกติจะเป็นช่องว่าง " -"
ซึ่งนี่ เป็นการตั้งค่าตัวเลือก append ในแฟ้ม lilo.conf นั่นเอง" +"เติมพารามิเตอร์อื่นๆ ที่ต้องการผ่านไปให้เคอร์เนลที่นี่ ซึ่งปกติจะเป็นช่องว่าง
ซึ่งนี่ " +"เป็นการตั้งค่าตัวเลือก append ในแฟ้ม lilo.conf นั่นเอง" #: kde-qt-common/images.cpp:79 msgid "Set &Default" @@ -382,8 +376,7 @@ msgstr "รายละเอียด" #: kde-qt-common/images.cpp:83 msgid "" "This button brings up a dialog box with further, less commonly used, options." -msgstr "" -"ปุ่มนี้จะเป็นการเรียกกล่องโต้ตอบ ตัวเลือกต่าง ๆ และส่วนที่ไม่ค่อยได้ใช้" +msgstr "ปุ่มนี้จะเป็นการเรียกกล่องโต้ตอบ ตัวเลือกต่าง ๆ และส่วนที่ไม่ค่อยได้ใช้" #: kde-qt-common/images.cpp:85 msgid "&Probe" @@ -392,8 +385,7 @@ msgstr "ตรวจค้น" #: kde-qt-common/images.cpp:87 msgid "" "Automatically generate a (hopefully) reasonable lilo.conf for your system" -msgstr "" -"ทำการสร้างอัตโนมัติ lilo.conf (หวังว่าอย่างนั้น) ที่ตรวจค้นได้ในระบบของคุณ" +msgstr "ทำการสร้างอัตโนมัติ lilo.conf (หวังว่าอย่างนั้น) ที่ตรวจค้นได้ในระบบของคุณ" #: kde-qt-common/images.cpp:88 msgid "&Check Configuration" @@ -428,20 +420,16 @@ msgid "Remove entry from the boot menu" msgstr "เอารายการที่มีออกจากเมนูการบูต" #: kde-qt-common/images.cpp:177 -msgid "" -"Configuration ok. LILO said:\n" -msgstr "" -"การปรับแต่งใช้ได้ โดย LILO แจ้งว่า:\n" +msgid "Configuration ok. LILO said:\n" +msgstr "การปรับแต่งใช้ได้ โดย LILO แจ้งว่า:\n" #: kde-qt-common/images.cpp:178 msgid "Configuration OK" msgstr "การปรับแต่งใช้ได้" #: kde-qt-common/images.cpp:180 -msgid "" -"Configuration NOT ok. LILO said:\n" -msgstr "" -"การปรับแต่งใช้ไม่ได้ โดย LILO แจ้งว่า:\n" +msgid "Configuration NOT ok. LILO said:\n" +msgstr "การปรับแต่งใช้ไม่ได้ โดย LILO แจ้งว่า:\n" #: kde-qt-common/images.cpp:181 msgid "Configuration NOT ok" @@ -495,14 +483,12 @@ msgstr "โหมดกราฟิกบนคอนโซลแบบข้อ #: kde/Details.cpp:47 qt/Details.cpp:47 msgid "" -"You can select the graphics mode for this kernel here." -"
If you intend to use a VGA graphics mode, you must compile the kernel with " -"support for framebuffer devices. The ask setting brings up a prompt at " -"boot time." +"You can select the graphics mode for this kernel here.
If you intend to " +"use a VGA graphics mode, you must compile the kernel with support for " +"framebuffer devices. The ask setting brings up a prompt at boot time." msgstr "" -"คุณสามารถเลือกโหมดกราฟิกสำหรับเคอร์เนลนี้ ได้ที่นี่" -"
ถ้าคุณต้องการใช้โหมดกราฟิกแบบ VGA คุณจะต้องคอมไพล์เคอร์เนล " -"ให้สนับสนุนอุปกรณ์เฟรมบัฟเฟอร์ด้วย ตัวเลือก ถาม " +"คุณสามารถเลือกโหมดกราฟิกสำหรับเคอร์เนลนี้ ได้ที่นี่
ถ้าคุณต้องการใช้โหมดกราฟิกแบบ VGA " +"คุณจะต้องคอมไพล์เคอร์เนล ให้สนับสนุนอุปกรณ์เฟรมบัฟเฟอร์ด้วย ตัวเลือก ถาม " "จะทำให้มีการถามทุกครั้ง เมื่อมีการบูต" #: kde/Details.cpp:75 qt/Details.cpp:76 @@ -512,14 +498,13 @@ msgstr "เมานท์รากของระบบไฟล์แบบอ #: kde/Details.cpp:76 qt/Details.cpp:77 msgid "" "Mount the root filesystem for this kernel read-only. Since the init scripts " -"normally take care of remounting the root filesystem in read-write mode after " -"running some checks, this should always be turned on." -"
Don't turn this off unless you know what you're doing." +"normally take care of remounting the root filesystem in read-write mode " +"after running some checks, this should always be turned on.
Don't turn " +"this off unless you know what you're doing." msgstr "" -"เมาท์รากของระบบไฟล์สำหรับเคอร์เนลนี้แบบอ่านอย่างเดียว ซึ่งเป็นไปตามปกติ " -"และสคริปต์ init จะทำการเมาท์ระบบไฟล์ใหม่อีกครั้ง " -"ในแบบอ่านและเขียนได้หลังจากการตรวจสอบบางอย่างแล้ว ซึ่งควรจะถูกเปิดใช้ทุกครั้ง" -"
ไม่ควรปิดการนี้ จนกว่าคุณจะแน่ใจในสิ่งที่ทำ" +"เมาท์รากของระบบไฟล์สำหรับเคอร์เนลนี้แบบอ่านอย่างเดียว ซึ่งเป็นไปตามปกติ และสคริปต์ init " +"จะทำการเมาท์ระบบไฟล์ใหม่อีกครั้ง ในแบบอ่านและเขียนได้หลังจากการตรวจสอบบางอย่างแล้ว " +"ซึ่งควรจะถูกเปิดใช้ทุกครั้ง
ไม่ควรปิดการนี้ จนกว่าคุณจะแน่ใจในสิ่งที่ทำ" #: kde/Details.cpp:78 qt/Details.cpp:80 msgid "Do not check &partition table" @@ -527,39 +512,38 @@ msgstr "ไม่ต้องตรวจสอบตารางพาร์ต #: kde/Details.cpp:79 msgid "" -"This turns off some sanity checks while writing the configuration. This should " -"not be used under \"normal\" circumstances, but it can be useful, for example, " -"by providing the capability of booting from a floppy disk, without having a " -"floppy in the drive every time you run lilo." -"
This sets the unsafe keyword in lilo.conf." +"This turns off some sanity checks while writing the configuration. This " +"should not be used under \"normal\" circumstances, but it can be useful, for " +"example, by providing the capability of booting from a floppy disk, without " +"having a floppy in the drive every time you run lilo.
This sets the " +"unsafe keyword in lilo.conf." msgstr "" -"เป็นการปิดการตรวจสอบขณะที่มีการเขียนแฟ้มปรับแต่งอยู่ ซึ่งไม่ควรใช้ภายใต้สภาวะ " -"\"ปกติ\" แต่ควรใช้ในกรณีเช่นการทำการติดตั้งเพื่อการบูตจากแผ่นฟลอปปี " -"โดยไม่ต้องมีแผ่นฟลอปปีอยู่ในไดรฟ์ ทุกครั้งที่เรียกคำสั่ง lilo" -"
ซึ่งนี่ก็เป็นการตั้งค่าตัวเลือก unsafe ไว้ในแฟ้ม lilo.conf นั่นเอง" +"เป็นการปิดการตรวจสอบขณะที่มีการเขียนแฟ้มปรับแต่งอยู่ ซึ่งไม่ควรใช้ภายใต้สภาวะ \"ปกติ\" " +"แต่ควรใช้ในกรณีเช่นการทำการติดตั้งเพื่อการบูตจากแผ่นฟลอปปี โดยไม่ต้องมีแผ่นฟลอปปีอยู่ในไดรฟ์ " +"ทุกครั้งที่เรียกคำสั่ง lilo
ซึ่งนี่ก็เป็นการตั้งค่าตัวเลือก unsafe ไว้ในแฟ้ม lilo.conf " +"นั่นเอง" #: kde/Details.cpp:83 qt/Details.cpp:86 msgid "" "Checking this box enables automatic recording of boot command lines as the " -"default for the following bootups. This way, lilo \"locks\" on a choice until " -"it is manually overridden." -"
This sets the lock option in lilo.conf" +"default for the following bootups. This way, lilo \"locks\" on a choice " +"until it is manually overridden.
This sets the lock option in lilo." +"conf" msgstr "" -"เช็คตัวเลือกนี้เพื่อให้ทำการบันทึกคำสั่งการบูตอัตโนมัติ " -"ให้เป็นปริยายในตอนบูตทุกครั้ง โดย lilo จะ \"ล็อก\" หัวข้อที่เลือกไว้ " -"จนกว่าจะมีการเปลี่ยนแปลงอื่น ๆ " -"
เป็นการตั้งค่าตัวเลือก lock ในแฟ้ม lilo.conf นั่นเอง" +"เช็คตัวเลือกนี้เพื่อให้ทำการบันทึกคำสั่งการบูตอัตโนมัติ ให้เป็นปริยายในตอนบูตทุกครั้ง โดย lilo จะ " +"\"ล็อก\" หัวข้อที่เลือกไว้ จนกว่าจะมีการเปลี่ยนแปลงอื่น ๆ
เป็นการตั้งค่าตัวเลือก lock ในแฟ้ม lilo.conf นั่นเอง" #: kde/Details.cpp:86 qt/Details.cpp:89 msgid "" "If this box is checked, a password (entered below) is required only if any " -"parameters are changed (i.e. the user can boot linux, but not " -"linux single or linux init=/bin/sh).\n" +"parameters are changed (i.e. the user can boot linux, but not " +"linux single or linux init=/bin/sh).\n" "This sets the restricted option in lilo.conf." msgstr "" -"ถ้าเลือกตัวเลือกนี้ จะต้องใช้รหัสผ่าน (ด้านล่างนี้) " -"หากมีการเปลี่ยนแปลงพารามิเตอร์ในการบูต (เช่น ผู้ใช้บูต linux " -"แต่ไม่ใช่แบบ linux single หรือ linux init=/bin/sh เป็นต้น)\n" +"ถ้าเลือกตัวเลือกนี้ จะต้องใช้รหัสผ่าน (ด้านล่างนี้) หากมีการเปลี่ยนแปลงพารามิเตอร์ในการบูต (เช่น " +"ผู้ใช้บูต linux แต่ไม่ใช่แบบ linux single หรือ linux init=/bin/sh เป็นต้น)\n" "เป็นการตั้งค่าตัวเลือก restricted ในแฟ้ม lilo.conf นั่นเอง" #: kde/Details.cpp:94 qt/Details.cpp:98 @@ -570,9 +554,9 @@ msgid "" "You'll want to make sure nobody untrusted can read this file. Also, you " "probably don't want to use your normal/root password here." msgstr "" -"เติมรหัสผ่านที่ต้องการใช้ในการบูต (ถ้ามีการใช้) ที่นี่ ซึ่งหากเลือกตัวเลือก " -"restricted จะมีการถามรหัสผ่านสำหรับพารามิเตอร์อื่น ๆ ที่เพิ่มเข้ามาเท่านั้น " -"
คำเตือน: รหัสผ่านถูกเก็บไว้เป็นข้อความธรรมดาในแฟ้ม /etc/lilo.conf " +"เติมรหัสผ่านที่ต้องการใช้ในการบูต (ถ้ามีการใช้) ที่นี่ ซึ่งหากเลือกตัวเลือก restricted " +"จะมีการถามรหัสผ่านสำหรับพารามิเตอร์อื่น ๆ ที่เพิ่มเข้ามาเท่านั้น
คำเตือน: " +"รหัสผ่านถูกเก็บไว้เป็นข้อความธรรมดาในแฟ้ม /etc/lilo.conf " "คุณต้องแน่ใจว่าไม่มีใครที่ไม่น่าไว้ใจจะเข้าถึงแฟ้มนี้ได้" #: kde/kcontrol.cpp:48 @@ -590,16 +574,24 @@ msgstr "(c) 2000, Bernhard Rosenkraenzer" #: qt/Details.cpp:81 msgid "" "This turns off some sanity checks while writing the configuration. This " -"shouldn't be used under \"normal\" circumstances, but it's useful, for example, " -"for installing the possibility to boot from a floppy disk without having a " -"floppy in the drive every time you run lilo." -"
This sets the unsafe keyword in lilo.conf." +"shouldn't be used under \"normal\" circumstances, but it's useful, for " +"example, for installing the possibility to boot from a floppy disk without " +"having a floppy in the drive every time you run lilo.
This sets the " +"unsafe keyword in lilo.conf." +msgstr "" +"นี่จะเป็นการปิดการตรวจสอบขณะที่มีการเขียนแฟ้มปรับแต่งอยู่ ซึ่งไม่ควรใช้ภายใต้สภาวะ \"ปกติ\" " +"แต่ควรใช้เมื่อ ตัวอย่างเช่น สำหรับการติดตั้งเพื่อการบูตจากฟลอปปี โดยไม่ต้องมีแผ่นฟลอปปีอยู่ในไดรฟ์ " +"ทุกครั้งที่เรียกคำสั่ง lilo
ซึ่งนี่ก็เป็นการตั้งค่าตัวเลือก unsafe ในแฟ้ม lilo.conf " +"นั่นเอง" + +#: qt/Details.cpp:102 qt/InputBox.cpp:47 qt/InputBox.cpp:52 +#: qt/standalone.cpp:58 +msgid "&OK" +msgstr "" + +#: qt/Details.cpp:103 qt/InputBox.cpp:48 qt/standalone.cpp:61 +msgid "&Cancel" msgstr "" -"นี่จะเป็นการปิดการตรวจสอบขณะที่มีการเขียนแฟ้มปรับแต่งอยู่ " -"ซึ่งไม่ควรใช้ภายใต้สภาวะ \"ปกติ\" แต่ควรใช้เมื่อ ตัวอย่างเช่น " -"สำหรับการติดตั้งเพื่อการบูตจากฟลอปปี โดยไม่ต้องมีแผ่นฟลอปปีอยู่ในไดรฟ์ " -"ทุกครั้งที่เรียกคำสั่ง lilo" -"
ซึ่งนี่ก็เป็นการตั้งค่าตัวเลือก unsafe ในแฟ้ม lilo.conf นั่นเอง" #: qt/standalone.cpp:41 #, fuzzy @@ -609,23 +601,25 @@ msgstr "นี่คืออะไร ?" #: qt/standalone.cpp:43 #, fuzzy msgid "" -"The What's This? button is part of this program's help system. Click on " -"the What's This? button then on any widget in the window to get information " -"(like this) on it." +"The What's This? button is part of this program's help system. Click " +"on the What's This? button then on any widget in the window to get " +"information (like this) on it." +msgstr "" +"ปุ่ม นี่คืออะไร ? เป็นส่วนหนึ่งของโปรแกรมระบบช่วยเหลือ คลิกที่ปุ่มนี่คืออะไร " +"จากนั้นคลิกบนคอนโทรลต่าง ๆ ในหน้าต่าง เพื่อดูรายละเอียดข้อมูลของคอนโทรลนั้น ๆ" + +#: qt/standalone.cpp:45 +msgid "&Help" msgstr "" -"ปุ่ม นี่คืออะไร ? เป็นส่วนหนึ่งของโปรแกรมระบบช่วยเหลือ " -"คลิกที่ปุ่มนี่คืออะไร จากนั้นคลิกบนคอนโทรลต่าง ๆ ในหน้าต่าง " -"เพื่อดูรายละเอียดข้อมูลของคอนโทรลนั้น ๆ" #: qt/standalone.cpp:47 msgid "" -"This button calls up the program's online help system. If it does nothing, no " -"help file has been written (yet); in that case, use the What's This " -"button on the left." +"This button calls up the program's online help system. If it does nothing, " +"no help file has been written (yet); in that case, use the What's This button on the left." msgstr "" -"ปุ่มนี้จะทำการเรียกระบบช่วยเหลือของโปรแกรมนี้ขึ้นมา " -"ในกรณีที่ไม่มีแฟ้มช่วยเหลืออยู่ ให้ลองใช้ปุ่ม นี่คืออะไร ? " -"ซึ่งอยู่ด้านซ้ายแทน" +"ปุ่มนี้จะทำการเรียกระบบช่วยเหลือของโปรแกรมนี้ขึ้นมา ในกรณีที่ไม่มีแฟ้มช่วยเหลืออยู่ ให้ลองใช้ปุ่ม " +"นี่คืออะไร ? ซึ่งอยู่ด้านซ้ายแทน" #: qt/standalone.cpp:49 msgid "&Default" @@ -644,8 +638,11 @@ msgstr "ตั้งค่าใหม่" msgid "" "This button resets all parameters to what they were before you started the " "program." +msgstr "ปุ่มนี้จะทำการปรับค่าทุก ๆ พารามิเตอร์ให้เป็นเหมือนเมื่อเริ่มโปรแกรมใหม่ ๆ" + +#: qt/standalone.cpp:55 +msgid "&Apply" msgstr "" -"ปุ่มนี้จะทำการปรับค่าทุก ๆ พารามิเตอร์ให้เป็นเหมือนเมื่อเริ่มโปรแกรมใหม่ ๆ" #: qt/standalone.cpp:56 msgid "This button saves all your changes without exiting." @@ -658,15 +655,3 @@ msgstr "ปุ่มนี้จะทำการบันทึกการเ #: qt/standalone.cpp:62 msgid "This button exits the program without saving your changes." msgstr "ปุ่มนี้ใช้เพื่อออกจากโปรแกรมโดยไม่มีการบันทึกการเปลี่ยนแปลง" - -#: _translatorinfo.cpp:1 -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "ถนอมทรัพย์ นพบูรณ์" - -#: _translatorinfo.cpp:3 -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "donga_n@yahoo.com" -- cgit v1.2.3