From be42d056cf0ee9968846ea5d0d3d38b72948ea56 Mon Sep 17 00:00:00 2001 From: TDE Weblate Date: Sat, 15 Dec 2018 19:30:20 +0000 Subject: Update translation files Updated by Update PO files to match POT (msgmerge) hook in Weblate. --- tde-i18n-zh_TW/messages/tdeadmin/knetworkconf.po | 961 +++++++++++------------ 1 file changed, 456 insertions(+), 505 deletions(-) (limited to 'tde-i18n-zh_TW/messages/tdeadmin') diff --git a/tde-i18n-zh_TW/messages/tdeadmin/knetworkconf.po b/tde-i18n-zh_TW/messages/tdeadmin/knetworkconf.po index 080c041c6fe..8b2e50a4091 100644 --- a/tde-i18n-zh_TW/messages/tdeadmin/knetworkconf.po +++ b/tde-i18n-zh_TW/messages/tdeadmin/knetworkconf.po @@ -5,9 +5,10 @@ msgid "" msgstr "" "Project-Id-Version: knetworkconf\n" -"POT-Creation-Date: 2014-11-05 10:17-0600\n" +"POT-Creation-Date: 2018-12-13 14:10+0100\n" "PO-Revision-Date: 2006-06-19 09:12+0800\n" -"Last-Translator: Frank Weng (a.k.a. Franklin) \n" +"Last-Translator: Frank Weng (a.k.a. Franklin) \n" "Language-Team: Chinese Traditional \n" "Language: \n" "MIME-Version: 1.0\n" @@ -15,27 +16,132 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.2\n" -#: knetworkconf.cpp:66 +#: _translatorinfo:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "Frank Weng (a.k.a. Franklin)" + +#: _translatorinfo:2 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "franklin at goodhorse dot idv dot tw" + +#: knetworkconf/kadddevicecontainer.cpp:53 +msgid "&Advanced Settings" +msgstr "進階設定(&A)" + +#: knetworkconf/kadddevicecontainer.cpp:54 +#: knetworkconf/kadddevicecontainer.cpp:55 +msgid "Toggle between advanced and basic settings" +msgstr "切換基本或進階設定" + +#: knetworkconf/kadddevicecontainer.cpp:56 +#: knetworkconf/kaddknownhostdlg.ui.h:69 knetworkconf/kaddknownhostdlg.ui:129 +#: knetworkconf/knetworkconf.cpp:210 knetworkconf/kreloadnetworkdlg.ui:73 +#: knetworkconf/tdeselectdistrodlg.ui:38 +#, no-c-format +msgid "&OK" +msgstr "" + +#: knetworkconf/kadddevicecontainer.cpp:57 +msgid "Apply changes" +msgstr "套用變更" + +#: knetworkconf/kadddevicecontainer.cpp:58 knetworkconf/kadddnsserverdlg.ui:103 +#: knetworkconf/kaddknownhostdlg.ui:104 knetworkconf/tdeselectdistrodlg.ui:55 +#, no-c-format +msgid "&Cancel" +msgstr "" + +#: knetworkconf/kadddevicecontainer.cpp:59 +msgid "Forget changes" +msgstr "丟棄變更" + +#: knetworkconf/kadddevicecontainer.cpp:129 +#: knetworkconf/kadddnsserverdlg.ui.h:42 knetworkconf/kaddknownhostdlg.ui.h:25 +msgid "The format of the specified IP address is not valid." +msgstr "指定的 IP 位址格式不正確。" + +#: knetworkconf/kadddevicecontainer.cpp:129 +#: knetworkconf/kadddevicecontainer.cpp:132 +#: knetworkconf/kadddevicecontainer.cpp:135 +#: knetworkconf/kadddevicecontainer.cpp:138 +#: knetworkconf/kadddnsserverdlg.ui.h:42 knetworkconf/kaddknownhostdlg.ui.h:25 +#: knetworkconf/knetworkconf.cpp:590 +msgid "Invalid IP Address" +msgstr "不正確的 IP 位址" + +#: knetworkconf/kadddevicecontainer.cpp:132 +msgid "The format of the specified netmask is not valid." +msgstr "網路遮罩格式不正確。" + +#: knetworkconf/kadddevicecontainer.cpp:135 +msgid "The format of the specified broadcast is not valid." +msgstr "網路廣播位址格式不正確。" + +#: knetworkconf/kadddevicecontainer.cpp:138 +msgid "The format of the specified Gateway is not valid." +msgstr "閘道位址格式不正確。" + +#: knetworkconf/kadddevicecontainer.cpp:174 +msgid "Basic Settings" +msgstr "基本設定" + +#: knetworkconf/kadddevicecontainer.cpp:179 +msgid "Advanced Settings" +msgstr "進階設定" + +#: knetworkconf/kadddnsserverdlg.ui.h:54 +msgid "You have to type an alias first." +msgstr "您必須先輸入一個別名。" + +#: knetworkconf/kadddnsserverdlg.ui.h:54 +msgid "Invalid Text" +msgstr "不合法的文字" + +#: knetworkconf/kaddknownhostdlg.ui.h:29 +msgid "You must add at least one alias for the specified IP address." +msgstr "您必須為這個 IP 位址至少指定一個別名。" + +#: knetworkconf/kaddknownhostdlg.ui.h:29 +msgid "Insufficient Aliases" +msgstr "不適當的別名" + +#: knetworkconf/kaddknownhostdlg.ui.h:63 +msgid "Edit Alias" +msgstr "編輯別名" + +#: knetworkconf/kaddknownhostdlg.ui.h:64 knetworkconf/kaddknownhostdlg.ui.h:92 +msgid "Alias:" +msgstr "別名：" + +#: knetworkconf/kaddknownhostdlg.ui.h:91 +msgid "Add New Alias" +msgstr "新增別名" + +#: knetworkconf/knetworkconf.cpp:66 msgid "Could not load network configuration information." msgstr "無法載入網路設定資訊。" -#: knetworkconf.cpp:67 +#: knetworkconf/knetworkconf.cpp:67 msgid "Error Reading Configuration File" msgstr "讀取設定檔時發生錯誤。" -#: knetworkconf.cpp:118 knetworkconf.cpp:756 +#: knetworkconf/knetworkconf.cpp:118 knetworkconf/knetworkconf.cpp:756 msgid "Enabled" msgstr "開啟" -#: knetworkconf.cpp:128 knetworkconf.cpp:770 +#: knetworkconf/knetworkconf.cpp:128 knetworkconf/knetworkconf.cpp:770 msgid "Disabled" msgstr "關閉" -#: knetworkconf.cpp:137 knetworkconf.cpp:304 +#: knetworkconf/knetworkconf.cpp:137 knetworkconf/knetworkconf.cpp:304 msgid "Manual" msgstr "手動" -#: knetworkconf.cpp:158 +#: knetworkconf/knetworkconf.cpp:158 msgid "" "The new configuration has not been saved.\n" "Do you want to apply changes before quitting?" @@ -43,62 +149,61 @@ msgstr "" "新的設定尚未儲存。\n" "您要在離開前先套用新設定嗎？" -#: knetworkconf.cpp:159 knetworkconf.cpp:831 knetworkconf.cpp:850 +#: knetworkconf/knetworkconf.cpp:159 knetworkconf/knetworkconf.cpp:831 +#: knetworkconf/knetworkconf.cpp:850 msgid "New Configuration Not Saved" msgstr "不要儲存" -#: knetworkconf.cpp:206 +#: knetworkconf/knetworkconf.cpp:206 msgid "Edit Server" msgstr "編輯伺服器" -#: knetworkconf.cpp:233 +#: knetworkconf/knetworkconf.cpp:233 #, c-format msgid "Configure Device %1" msgstr "設定設備 %1" -#: knetworkconf.cpp:442 +#: knetworkconf/knetworkconf.cpp:442 msgid "Could not open file '/etc/resolv.conf' for reading." msgstr "無法開啟 /etc/resolv.conf。" -#: knetworkconf.cpp:443 +#: knetworkconf/knetworkconf.cpp:443 msgid "Error Loading Config Files" msgstr "載入設定檔時發生錯誤" -#: knetworkconf.cpp:590 +#: knetworkconf/knetworkconf.cpp:590 msgid "The default Gateway IP address is invalid." msgstr "預設的閘道 IP 位址不正確。" -#: kadddevicecontainer.cpp:129 kadddevicecontainer.cpp:132 -#: kadddevicecontainer.cpp:135 kadddevicecontainer.cpp:138 -#: kadddnsserverdlg.ui.h:42 kaddknownhostdlg.ui.h:25 knetworkconf.cpp:590 -msgid "Invalid IP Address" -msgstr "不正確的 IP 位址" - -#: knetworkconf.cpp:681 +#: knetworkconf/knetworkconf.cpp:681 msgid "Enabling interface %1" msgstr "開啟介面 %1" -#: knetworkconf.cpp:683 +#: knetworkconf/knetworkconf.cpp:683 msgid "Disabling interface %1" msgstr "關閉介面 %1" -#: knetworkconf.cpp:717 +#: knetworkconf/knetworkconf.cpp:717 msgid "" -"Could not launch backend to change network device state. You will have to do it " -"manually." +"Could not launch backend to change network device state. You will have to do " +"it manually." msgstr "無法叫出後端來更新網路設備的狀態。您必須手動執行。" -#: knetworkconf.cpp:738 +#: knetworkconf/knetworkconf.cpp:718 knetworkconf/knetworkconf.cpp:1093 +msgid "Error" +msgstr "" + +#: knetworkconf/knetworkconf.cpp:738 msgid "" "There was an error changing the device's state. You will have to do it " "manually." msgstr "更改設備狀態時發生錯誤。您必須手動執行。" -#: knetworkconf.cpp:739 +#: knetworkconf/knetworkconf.cpp:739 msgid "Could Not Change Device State" msgstr "無法更改設備狀態" -#: knetworkconf.cpp:830 knetworkconf.cpp:849 +#: knetworkconf/knetworkconf.cpp:830 knetworkconf/knetworkconf.cpp:849 msgid "" "The new configuration has not been saved.\n" "Apply changes?" @@ -106,80 +211,245 @@ msgstr "" "新的設定尚未儲存。\n" "您要套用新設定嗎？" -#. i18n: file kaddknownhostdlg.ui line 16 -#: knetworkconf.cpp:867 rc.cpp:199 +#: knetworkconf/kaddknownhostdlg.ui:16 knetworkconf/knetworkconf.cpp:867 #, no-c-format msgid "Add New Static Host" msgstr "新增靜態主機" -#: knetworkconf.cpp:900 +#: knetworkconf/knetworkconf.cpp:900 msgid "Edit Static Host" msgstr "編輯靜態主機" -#: knetworkconf.cpp:1038 +#: knetworkconf/knetworkconf.cpp:1038 msgid "Could not load the selected Network Profile." msgstr "無法載入選擇的網路設定檔。" -#: knetworkconf.cpp:1039 +#: knetworkconf/knetworkconf.cpp:1039 msgid "Error Reading Profile" msgstr "讀取設定檔時發生錯誤。" -#: knetworkconf.cpp:1062 +#: knetworkconf/knetworkconf.cpp:1062 msgid "Create New Network Profile" msgstr "建立新的網路設定檔" -#: knetworkconf.cpp:1063 +#: knetworkconf/knetworkconf.cpp:1063 msgid "Name of new profile:" msgstr "新的網路設定檔名稱：" -#: knetworkconf.cpp:1092 +#: knetworkconf/knetworkconf.cpp:1092 msgid "There is already another profile with that name." msgstr "已經有一個相同名稱的設定檔了。" -#. i18n: file kadddevicedlg.ui line 44 -#: rc.cpp:3 +#: knetworkconf/knetworkconfigparser.cpp:41 +#, fuzzy +msgid "" +"Could not find the backend script for the network configuration detection. " +"Something is wrong with your installation.\n" +" Please check that \n" +"{TDE_PATH}/%1 \n" +"file is present." +msgstr "" +"找不到偵測網路設定的後端文稿。您的系統可能有問題。\n" +"請確定 {TDE_PATH}/%1 檔案存在。" + +#: knetworkconf/knetworkconfigparser.cpp:42 +msgid "Could Not Find Network Configuration Backend Script" +msgstr "找不到網路設定的後端文稿" + +#: knetworkconf/knetworkconfigparser.cpp:65 +#: knetworkconf/knetworkconfigparser.cpp:95 +#: knetworkconf/knetworkconfigparser.cpp:320 +#: knetworkconf/knetworkconfigparser.cpp:1016 +msgid "" +"Could not execute backend script for the network configuration detection. " +"Something is wrong with your installation." +msgstr "無法執行偵測網路設定的後端文稿。您的系統可能有問題。" + +#: knetworkconf/knetworkconfigparser.cpp:66 +#: knetworkconf/knetworkconfigparser.cpp:96 +#: knetworkconf/knetworkconfigparser.cpp:321 +#: knetworkconf/knetworkconfigparser.cpp:1017 +msgid "Could Not Launch Network Configuration Backend Script" +msgstr "無法叫出網路設定後端文稿" + +#: knetworkconf/knetworkconfigparser.cpp:113 +#: knetworkconf/knetworkconfigparser.cpp:837 +msgid "Could not parse the XML output from the network configuration backend." +msgstr "無法剖析網路設定後端的 XML 輸出。" + +#: knetworkconf/knetworkconfigparser.cpp:114 +msgid "Error While Listing Network Interfaces" +msgstr "列出網路介面時發生錯誤" + +#: knetworkconf/knetworkconfigparser.cpp:191 +msgid "Could not open file /proc/net/route." +msgstr "無法開啟檔案 /proc/net/route。" + +#: knetworkconf/knetworkconfigparser.cpp:192 +msgid "Could Not Open File" +msgstr "無法開啟檔案" + +#: knetworkconf/knetworkconfigparser.cpp:303 +#: knetworkconf/kreloadnetworkdlg.ui:28 +#, no-c-format +msgid "Reloading Network" +msgstr "重新載入網路" + +#: knetworkconf/knetworkconfigparser.cpp:304 +msgid "%1Please wait while saving the network settings...%2" +msgstr "%1請稍候，正在儲存網路設定...%2" + +#: knetworkconf/knetworkconfigparser.cpp:762 +msgid "Ethernet Network Device" +msgstr "乙太網路設備" + +#: knetworkconf/knetworkconfigparser.cpp:764 +msgid "Wireless Network Device" +msgstr "無線網路設備" + +#: knetworkconf/knetworkconfigparser.cpp:838 +msgid "Error Loading The Network Configuration" +msgstr "載入網路設定時發生錯誤" + +#: knetworkconf/knetworkconfigparser.cpp:1030 +msgid "" +"Could not parse the list of supported platforms from the network " +"configuration backend." +msgstr "無法剖析網路後端送來的支援平台清單。" + +#: knetworkconf/knetworkconfigparser.cpp:1031 +msgid "Error Obtaining Supported Platforms List" +msgstr "取得支援平台清單時發生錯誤" + +#: knetworkconf/knetworkconfmodule.cpp:94 +msgid "KNetworkConf" +msgstr "KNetworkConf" + +#: knetworkconf/knetworkconfmodule.cpp:97 +msgid "Lead Developer" +msgstr "主要開發者" + +#: knetworkconf/knetworkconfmodule.cpp:99 +msgid "Provided the Network backend which KNetworkConf relies on." +msgstr "提供 KNetworkConf 使用的網路後端。" + +#: knetworkconf/knetworkconfmodule.cpp:101 +msgid "Conectiva Linux Support" +msgstr "Conectiva Linux 支援" + +#: knetworkconf/knetworkconfmodule.cpp:103 +msgid "Documentation maintainer, and German translator" +msgstr "文件維護，德文翻譯" + +#: knetworkconf/knetworkconfmodule.cpp:105 +msgid "Various bugfixes and features" +msgstr "修正許多錯誤與提供許多功能" + +#: knetworkconf/knetworkconfmodule.cpp:107 +msgid "Various bugfixes and Brazilian Portuguese translator" +msgstr "修正許多錯誤，及巴西、葡萄牙翻譯" + +#: knetworkconf/knetworkconfmodule.cpp:113 +msgid "" +"%1Network configuration%2This module allows you to configure your TCP/IP " +"settings.%3" +msgstr "%1網路設定%2這個模組允許您設定您的 TCP/IP。%3" + +#: knetworkconf/kprofileslistviewtooltip.h:84 +msgid "Network Configuration of this Profile:" +msgstr "此設定檔的網路設定：" + +#: knetworkconf/kprofileslistviewtooltip.h:94 +#, c-format +msgid "

Interface: %1" +msgstr "

介面： %1" + +#: knetworkconf/kprofileslistviewtooltip.h:95 +#, c-format +msgid "
Type: %1" +msgstr "
型態： %1" + +#: knetworkconf/kprofileslistviewtooltip.h:101 +#, c-format +msgid "
Boot Protocol: %1" +msgstr "
開機協定： %1" + +#: knetworkconf/kprofileslistviewtooltip.h:104 +#, c-format +msgid "
IP Address: %1" +msgstr "
IP 位址： %1" + +#: knetworkconf/kprofileslistviewtooltip.h:105 +#, c-format +msgid "
Broadcast Address: %1" +msgstr "
廣播位址： %1" + +#: knetworkconf/kprofileslistviewtooltip.h:107 +#, c-format +msgid "
On Boot: %1" +msgstr "
開機時啟動： %1" + +#: knetworkconf/kprofileslistviewtooltip.h:111 +#, c-format +msgid "

Default Gateway: %1" +msgstr "

預設閘道： %1" + +#: knetworkconf/kprofileslistviewtooltip.h:113 +#, c-format +msgid "
Domain Name: %1" +msgstr "
網域名稱： %1" + +#: knetworkconf/kprofileslistviewtooltip.h:114 +#, c-format +msgid "
Machine Name: %1" +msgstr "
機器名稱： %1" + +#: knetworkconf/kprofileslistviewtooltip.h:118 +#, c-format +msgid "
DNS Name Server: %1" +msgstr "
DNS 名稱伺服器： %1" + +#: knetworkconf/version.h:5 +msgid "" +"KNetworkConf - A Trinity Control Center module to configure TCP/IP settings." +msgstr "KNetworkConf - TDE 控制中心的模組，用於設定 TCP/IP。" + +#: knetworkconf/kadddevicedlg.ui:44 #, no-c-format msgid "Configure Interface" msgstr "設定介面" -#. i18n: file kadddevicedlg.ui line 64 -#: rc.cpp:6 +#: knetworkconf/kadddevicedlg.ui:64 #, no-c-format msgid "TCP/IP Address" msgstr "TCP/IP 位址" -#. i18n: file kadddevicedlg.ui line 93 -#: rc.cpp:9 +#: knetworkconf/kadddevicedlg.ui:93 #, no-c-format msgid "dhcp" msgstr "DHCP" -#. i18n: file kadddevicedlg.ui line 98 -#: rc.cpp:12 +#: knetworkconf/kadddevicedlg.ui:98 #, no-c-format msgid "bootp" msgstr "BOOTP" -#. i18n: file kadddevicedlg.ui line 105 -#: rc.cpp:15 rc.cpp:18 +#: knetworkconf/kadddevicedlg.ui:105 knetworkconf/kadddevicedlg.ui:108 #, no-c-format msgid "The boot protocol this network device should use" msgstr "這個網路設備使用的開機協定" -#. i18n: file kadddevicedlg.ui line 133 -#: rc.cpp:21 +#: knetworkconf/kadddevicedlg.ui:133 #, no-c-format msgid "Manual:" msgstr "手動：" -#. i18n: file kadddevicedlg.ui line 136 -#: rc.cpp:24 +#: knetworkconf/kadddevicedlg.ui:136 #, no-c-format msgid "Use a static IP address. Use the fields below to enter the values" msgstr "使用靜態 IP 位址。請在下面的欄位輸入資料" -#. i18n: file kadddevicedlg.ui line 140 -#: rc.cpp:27 +#: knetworkconf/kadddevicedlg.ui:139 #, no-c-format msgid "" "

Sets this interface to use static IP settings.

\n" @@ -189,842 +459,523 @@ msgstr "" "

設定這個介面使用靜態 IP。

\n" "

請在下面的欄位中輸入相關的資料。

" -#. i18n: file kadddevicedlg.ui line 148 -#: rc.cpp:31 +#: knetworkconf/kadddevicedlg.ui:148 #, no-c-format msgid "Automatic:" msgstr "自動：" -#. i18n: file kadddevicedlg.ui line 151 -#: rc.cpp:34 +#: knetworkconf/kadddevicedlg.ui:151 #, no-c-format msgid "Use a dynamic IP address" msgstr "使用動態 IP 位址" -#. i18n: file kadddevicedlg.ui line 156 -#: rc.cpp:37 +#: knetworkconf/kadddevicedlg.ui:154 #, no-c-format msgid "" "

Using an dynamic IP address causes this device to get a free IP address " "automatically.

\n" -"

The interface will try to contact an DHCP- or BOOTP-Server during the boot " -"process.

\n" +"

The interface will try to contact an DHCP- or BOOTP-Server during the " +"boot process.

\n" "

Rendevouz is not supported yet.

" msgstr "" "

使用動態 IP 位址，網路設備會自動取得 IP 位址。

\n" -"

此介面會在開機時試著去尋找 DHCP 或 BOOTP 伺服器。

" -"

Rendevouz 尚未支援。

" +"

此介面會在開機時試著去尋找 DHCP 或 BOOTP 伺服器。

Rendevouz 尚未支" +"援。

" -#. i18n: file kadddevicedlg.ui line 184 -#: rc.cpp:42 +#: knetworkconf/kadddevicedlg.ui:184 #, no-c-format msgid "Activate when the computer starts" msgstr "於電腦開機時啟動" -#. i18n: file kadddevicedlg.ui line 187 -#: rc.cpp:45 +#: knetworkconf/kadddevicedlg.ui:187 #, no-c-format msgid "Ensures that this interface gets activated during boot time" msgstr "確保在開機期間此介面已經被開啟。" -#. i18n: file kadddevicedlg.ui line 191 -#: rc.cpp:48 +#: knetworkconf/kadddevicedlg.ui:190 #, no-c-format msgid "" "

Ensures that this interface gets activated during boot time.

\n" "

Otherwise, you will have to active the interface manually after you have " "logged in after the boot process.

" -msgstr "

確保在開機期間此介面已經被開啟。

不然您就必須在開完機後登入系統，再手動啟動介面。

" +msgstr "" +"

確保在開機期間此介面已經被開啟。

不然您就必須在開完機後登入系統，再" +"手動啟動介面。

" -#. i18n: file kadddevicedlg.ui line 197 -#: rc.cpp:52 +#: knetworkconf/kadddevicedlg.ui:197 #, no-c-format msgid "255.255.255.0" msgstr "255.255.255.0" -#. i18n: file kadddevicedlg.ui line 202 -#: rc.cpp:55 +#: knetworkconf/kadddevicedlg.ui:202 #, no-c-format msgid "255.255.0.0" msgstr "255.255.0.0" -#. i18n: file kadddevicedlg.ui line 207 -#: rc.cpp:58 +#: knetworkconf/kadddevicedlg.ui:207 #, no-c-format msgid "255.0.0.0" msgstr "255.0.0.0" -#. i18n: file kadddevicedlg.ui line 212 -#: rc.cpp:61 +#: knetworkconf/kadddevicedlg.ui:212 #, no-c-format msgid "255.255.255.128" msgstr "255.255.255.128" -#. i18n: file kadddevicedlg.ui line 217 -#: rc.cpp:64 +#: knetworkconf/kadddevicedlg.ui:217 #, no-c-format msgid "255.255.255.192" msgstr "255.255.255.192" -#. i18n: file kadddevicedlg.ui line 222 -#: rc.cpp:67 +#: knetworkconf/kadddevicedlg.ui:222 #, no-c-format msgid "255.255.255.240" msgstr "255.255.255.240" -#. i18n: file kadddevicedlg.ui line 227 -#: rc.cpp:70 +#: knetworkconf/kadddevicedlg.ui:227 #, no-c-format msgid "255.255.255.248" msgstr "255.255.255.248" -#. i18n: file kadddevicedlg.ui line 237 -#: rc.cpp:73 +#: knetworkconf/kadddevicedlg.ui:237 #, no-c-format msgid "Subnetmask of the network device" msgstr "此網路設備的子網路遮罩：" -#. i18n: file kadddevicedlg.ui line 242 -#: rc.cpp:76 +#: knetworkconf/kadddevicedlg.ui:240 #, no-c-format msgid "" "

Please enter the desired subnetmask for the interface here.

\n" "

For small private networks, 255.255.255.0 will most often be a reasonable " "default value.

\n" -"

This field will change from a popup box to a combo box as soon as you enable " -"the advanced settings below.

" +"

This field will change from a popup box to a combo box as soon as you " +"enable the advanced settings below.

" msgstr "" "

請輸入此介面的子網路遮罩。

\n" "

對某些小的私密網路而言，255.255.255.0 通常是合理的預設值。

\n" "

若您開啟進階設定的話，此欄位會有個選單可以選擇。

" -#. i18n: file kadddevicedlg.ui line 284 -#: rc.cpp:81 +#: knetworkconf/kadddevicedlg.ui:284 #, no-c-format msgid "Netmask:" msgstr "網路遮罩：" -#. i18n: file kadddevicedlg.ui line 287 -#: rc.cpp:84 rc.cpp:87 +#: knetworkconf/kadddevicedlg.ui:287 knetworkconf/kadddevicedlg.ui:290 #, no-c-format msgid "" -"The netmask defines a range of IP numbers which will build a subnet inside the " -"network." +"The netmask defines a range of IP numbers which will build a subnet inside " +"the network." msgstr "網路遮罩定義子網路內可用的 IP 範圍。" -#. i18n: file kadddevicedlg.ui line 301 -#: rc.cpp:90 +#: knetworkconf/kadddevicedlg.ui:301 #, no-c-format msgid "IP address for the network device" msgstr "此網路設備的 IP 位址" -#. i18n: file kadddevicedlg.ui line 311 -#: rc.cpp:93 +#: knetworkconf/kadddevicedlg.ui:304 #, no-c-format msgid "" "

Here you should enter the IP address for the network interface.

\n" -"

Please note: If your network is connected to the internet, you should only " -"enter IP addresses you have been given by your provider.

\n" +"

Please note: If your network is connected to the internet, you should " +"only enter IP addresses you have been given by your provider.

\n" "

Otherwise, you should enter one of the IP addresses which are explicitly " "reserved for private use.

\n" "

Most small private networks use class C networks, which allow up to 255 " "computers in your network. So simply use addresses like 192.168.1.1, " "192.168.1.2, 192.168.1.171 and so on for your computers.

\n" -"

Cass C networks: 192.168.0.0 to 192.168.255.25, for example 192.168.0.13.

" -"\n" -"

Class B networks: 172.16.0.0 to 172.31.255.255, for example 172.28.2.5

\n" +"

Cass C networks: 192.168.0.0 to 192.168.255.25, for example 192.168.0.13." +"

\n" +"

Class B networks: 172.16.0.0 to 172.31.255.255, for example 172.28.2.5\n" "

Class A networks: 10.0.0.0 to 10.255.255.255, for example 10.5.12.14

\n" -"

Please ensure that all IP addresses you give to your computers are unique; " -"you will have many problems if the same address is assigned to more than one " -"network device.

" +"

Please ensure that all IP addresses you give to your computers are " +"unique; you will have many problems if the same address is assigned to more " +"than one network device.

" msgstr "" "

請在此輸入網路介面的 IP 位址。

\n" -"

請注意：如果您是連接到網際網路上，您應該輸入您的網路服務提供者給您的 IP 位址。

\n" +"

請注意：如果您是連接到網際網路上，您應該輸入您的網路服務提供者給您的 IP 位" +"址。

\n" "

否則，您應該輸入私密網路的位址。

\n" -"

大部份小的私密網路使用的是 C class 的網路，允許 255 台電腦在同一個網域內。

" -"

C class 網路：192.168.0.0 到 192.168.255.255，例如 192.168.0.13。

\n" +"

大部份小的私密網路使用的是 C class 的網路，允許 255 台電腦在同一個網域內。" +"

C class 網路：192.168.0.0 到 192.168.255.255，例如 192.168.0.13。\n" "

B class 網路：172.16.0.0 到 172.31.255.255，例如 172.28.2.5。

\n" "

A class 網路：10.0.0.0 到 10.255.255.255，例如 10.5.12.14。

\n" "

請確定您設定的 IP 位址不會跟別人衝突，否則您會遇到一大堆的麻煩。

" -#. i18n: file kadddevicedlg.ui line 336 -#: rc.cpp:103 rc.cpp:184 rc.cpp:202 rc.cpp:286 +#: knetworkconf/kadddevicedlg.ui:336 knetworkconf/kadddnsserverdlg.ui:84 +#: knetworkconf/kaddknownhostdlg.ui:38 knetworkconf/knetworkconfdlg.ui:296 #, no-c-format msgid "IP address:" msgstr "IP 位址：" -#. i18n: file kadddevicedlg.ui line 339 -#: rc.cpp:106 rc.cpp:109 rc.cpp:142 rc.cpp:145 +#: knetworkconf/kadddevicedlg.ui:339 knetworkconf/kadddevicedlg.ui:342 +#: knetworkconf/kadddevicedlgextension.ui:86 +#: knetworkconf/kadddevicedlgextension.ui:89 #, no-c-format msgid "" "An IP address is an unique identifier of a networking device in an TCP/IP " "network" msgstr "IP 位址是在 TCP/IP 網路上用於辨識網路設備的代碼。" -#. i18n: file kadddevicedlgextension.ui line 16 -#: rc.cpp:112 +#: knetworkconf/kadddevicedlgextension.ui:16 #, no-c-format msgid "Advanced Options" msgstr "進階選項" -#. i18n: file kadddevicedlgextension.ui line 27 -#: rc.cpp:115 +#: knetworkconf/kadddevicedlgextension.ui:27 #, no-c-format msgid "Advanced Device Information" msgstr "進階設備資訊" -#. i18n: file kadddevicedlgextension.ui line 30 -#: rc.cpp:118 +#: knetworkconf/kadddevicedlgextension.ui:30 #, no-c-format msgid "Set advanced setting for the network device" msgstr "設定網路設備的進階設定" -#. i18n: file kadddevicedlgextension.ui line 41 -#: rc.cpp:121 +#: knetworkconf/kadddevicedlgextension.ui:41 #, no-c-format msgid "Description:" msgstr "描述：" -#. i18n: file kadddevicedlgextension.ui line 44 -#: rc.cpp:124 rc.cpp:133 +#: knetworkconf/kadddevicedlgextension.ui:44 +#: knetworkconf/kadddevicedlgextension.ui:69 #, no-c-format msgid "IP address of the network device" msgstr "網路設備的 IP 位址" -#. i18n: file kadddevicedlgextension.ui line 55 -#: rc.cpp:127 rc.cpp:130 +#: knetworkconf/kadddevicedlgextension.ui:55 +#: knetworkconf/kadddevicedlgextension.ui:58 #, no-c-format msgid "Simply enter a short human-readable description for this device" msgstr "請簡短輸入此設備的描述" -#. i18n: file kadddevicedlgextension.ui line 72 -#: rc.cpp:136 +#: knetworkconf/kadddevicedlgextension.ui:72 #, no-c-format msgid "" "The Broadcast is a special address. All devices of a network respond if " "packages are sent to this address." msgstr "廣播位址是一個特殊位址，丟到此位址的封包，所有在此網路的設備都會收到。" -#. i18n: file kadddevicedlgextension.ui line 80 -#: rc.cpp:139 +#: knetworkconf/kadddevicedlgextension.ui:80 #, no-c-format msgid "Gateway:" msgstr "閘道位址：" -#. i18n: file kadddevicedlgextension.ui line 100 -#: rc.cpp:148 +#: knetworkconf/kadddevicedlgextension.ui:100 #, no-c-format msgid "Default gateway for the network device" msgstr "網路設備的預設閘道位址" -#. i18n: file kadddevicedlgextension.ui line 103 -#: rc.cpp:151 +#: knetworkconf/kadddevicedlgextension.ui:103 #, no-c-format msgid "" "

Here you should enter the default gateway for the network device.

" msgstr "

您應該輸入網路設備的預設閘道位址。

" -#. i18n: file kadddevicedlgextension.ui line 111 -#: rc.cpp:154 +#: knetworkconf/kadddevicedlgextension.ui:111 #, no-c-format msgid "Broadcast:" msgstr "廣播：" -#. i18n: file kadddevicewifiext.ui line 18 -#: rc.cpp:157 rc.cpp:160 +#: knetworkconf/kadddevicewifiext.ui:18 knetworkconf/kadddevicewifiext.ui:32 #, no-c-format msgid "Wireless Settings" msgstr "無線設定" -#. i18n: file kadddevicewifiext.ui line 43 -#: rc.cpp:163 +#: knetworkconf/kadddevicewifiext.ui:43 #, no-c-format msgid "WEP key:" msgstr "WEP 鍵值：" -#. i18n: file kadddevicewifiext.ui line 61 -#: rc.cpp:166 +#: knetworkconf/kadddevicewifiext.ui:61 #, no-c-format msgid "ESSID:" msgstr "ESSID：" -#. i18n: file kadddevicewifiext.ui line 69 -#: rc.cpp:169 +#: knetworkconf/kadddevicewifiext.ui:69 #, no-c-format msgid "Key type:" msgstr "鍵值型態：" -#. i18n: file kadddevicewifiext.ui line 75 -#: rc.cpp:172 +#: knetworkconf/kadddevicewifiext.ui:75 #, no-c-format msgid "ASCII" msgstr "ASCII" -#. i18n: file kadddevicewifiext.ui line 80 -#: rc.cpp:175 +#: knetworkconf/kadddevicewifiext.ui:80 #, no-c-format msgid "Hexadecimal" msgstr "十六進位碼" -#. i18n: file kadddnsserverdlg.ui line 28 -#: rc.cpp:178 +#: knetworkconf/kadddnsserverdlg.ui:28 #, no-c-format msgid "Add New DNS Server" msgstr "新增 DNS 伺服器" -#. i18n: file kadddnsserverdlg.ui line 59 -#: rc.cpp:181 +#: knetworkconf/kadddnsserverdlg.ui:59 #, no-c-format msgid "IP address of the new DNS server" msgstr "新的 DNS 伺服器的 IP 位址" -#. i18n: file kadddnsserverdlg.ui line 92 -#: rc.cpp:187 +#: knetworkconf/kadddnsserverdlg.ui:92 #, no-c-format msgid "&Add" msgstr "新增(&A)" -#. i18n: file kadddnsserverdlg.ui line 95 -#: rc.cpp:190 +#: knetworkconf/kadddnsserverdlg.ui:95 #, no-c-format msgid "Add the server to the list" msgstr "新增伺服器到清單中" -#. i18n: file kadddnsserverdlg.ui line 106 -#: rc.cpp:196 +#: knetworkconf/kadddnsserverdlg.ui:106 #, no-c-format msgid "Forget it" msgstr "丟棄" -#. i18n: file kaddknownhostdlg.ui line 154 -#: rc.cpp:211 rc.cpp:325 +#: knetworkconf/kaddknownhostdlg.ui:154 knetworkconf/knetworkconfdlg.ui:657 #, no-c-format msgid "Aliases" msgstr "別名" -#. i18n: file kaddknownhostdlg.ui line 184 -#: rc.cpp:214 rc.cpp:310 rc.cpp:328 +#: knetworkconf/kaddknownhostdlg.ui:184 knetworkconf/knetworkconfdlg.ui:571 +#: knetworkconf/knetworkconfdlg.ui:689 #, no-c-format msgid "&Add..." msgstr "新增(&A)..." -#. i18n: file kaddknownhostdlg.ui line 201 -#: rc.cpp:217 rc.cpp:313 rc.cpp:331 +#: knetworkconf/kaddknownhostdlg.ui:201 knetworkconf/knetworkconfdlg.ui:588 +#: knetworkconf/knetworkconfdlg.ui:706 #, no-c-format msgid "&Edit..." msgstr "編輯(&E)..." -#. i18n: file kdetectdistrodlg.ui line 16 -#: rc.cpp:223 +#: knetworkconf/kaddknownhostdlg.ui:218 knetworkconf/knetworkconfdlg.ui:605 +#: knetworkconf/knetworkconfdlg.ui:723 +#, no-c-format +msgid "&Remove" +msgstr "" + +#: knetworkconf/kdetectdistrodlg.ui:16 #, no-c-format msgid "Detecting Your Current Platform" msgstr "偵測您目前的平台" -#. i18n: file kdetectdistrodlg.ui line 60 -#: rc.cpp:226 +#: knetworkconf/kdetectdistrodlg.ui:60 #, no-c-format msgid "Please wait while detecting your current platform..." msgstr "請稍候，正在偵測您目前的平台..." -#. i18n: file kinterfaceupdowndlg.ui line 16 -#: rc.cpp:229 +#: knetworkconf/kinterfaceupdowndlg.ui:16 #, no-c-format msgid "Changing Interface State" msgstr "更改介面狀態" -#. i18n: file kinterfaceupdowndlg.ui line 64 -#: rc.cpp:232 +#: knetworkconf/kinterfaceupdowndlg.ui:64 #, no-c-format msgid "Bringing up interface eth0..." msgstr "帶起介面eth0..." -#. i18n: file knetworkconfdlg.ui line 36 -#: rc.cpp:235 +#: knetworkconf/knetworkconfdlg.ui:36 #, no-c-format msgid "Network Settings" msgstr "網路設定" -#. i18n: file knetworkconfdlg.ui line 42 -#: rc.cpp:238 +#: knetworkconf/knetworkconfdlg.ui:42 #, no-c-format msgid "Configure your TCP/IP settings" msgstr "設定您的 TCP/IP" -#. i18n: file knetworkconfdlg.ui line 45 -#: rc.cpp:241 +#: knetworkconf/knetworkconfdlg.ui:45 #, no-c-format msgid "Change TCP/IP settings" msgstr "變更 TCP/IP 設定" -#. i18n: file knetworkconfdlg.ui line 66 -#: rc.cpp:244 +#: knetworkconf/knetworkconfdlg.ui:66 #, no-c-format msgid "Network Interfaces" msgstr "網路介面" -#. i18n: file knetworkconfdlg.ui line 85 -#: rc.cpp:247 +#: knetworkconf/knetworkconfdlg.ui:85 #, no-c-format msgid "Available Network Interfaces" msgstr "可用的網路介面" -#. i18n: file knetworkconfdlg.ui line 110 -#: rc.cpp:250 +#: knetworkconf/knetworkconfdlg.ui:110 #, no-c-format msgid "Interface" msgstr "介面" -#. i18n: file knetworkconfdlg.ui line 121 -#: rc.cpp:253 rc.cpp:322 +#: knetworkconf/knetworkconfdlg.ui:121 knetworkconf/knetworkconfdlg.ui:646 #, no-c-format msgid "IP Address" msgstr "IP 位址" -#. i18n: file knetworkconfdlg.ui line 132 -#: rc.cpp:256 +#: knetworkconf/knetworkconfdlg.ui:132 #, no-c-format msgid "Protocol" msgstr "協定" -#. i18n: file knetworkconfdlg.ui line 143 -#: rc.cpp:259 +#: knetworkconf/knetworkconfdlg.ui:143 #, no-c-format msgid "State" msgstr "狀態" -#. i18n: file knetworkconfdlg.ui line 154 -#: rc.cpp:262 +#: knetworkconf/knetworkconfdlg.ui:154 #, no-c-format msgid "Comment" msgstr "註解" -#. i18n: file knetworkconfdlg.ui line 175 -#: rc.cpp:265 +#: knetworkconf/knetworkconfdlg.ui:175 #, no-c-format msgid "List of configured network devices" msgstr "已設定網路設備清單" -#. i18n: file knetworkconfdlg.ui line 194 -#: rc.cpp:268 +#: knetworkconf/knetworkconfdlg.ui:194 #, no-c-format msgid "Configure Interface..." msgstr "設定介面..." -#. i18n: file knetworkconfdlg.ui line 197 -#: rc.cpp:271 +#: knetworkconf/knetworkconfdlg.ui:197 #, no-c-format msgid "Change the settings of the selected device" msgstr "更改已選擇設備的設定" -#. i18n: file knetworkconfdlg.ui line 208 -#: rc.cpp:274 +#: knetworkconf/knetworkconfdlg.ui:208 #, no-c-format msgid "Enable Interface" msgstr "開啟介面" -#. i18n: file knetworkconfdlg.ui line 219 -#: rc.cpp:277 +#: knetworkconf/knetworkconfdlg.ui:219 #, no-c-format msgid "Disable Interface" msgstr "關閉介面" -#. i18n: file knetworkconfdlg.ui line 248 -#: rc.cpp:280 +#: knetworkconf/knetworkconfdlg.ui:248 #, no-c-format msgid "Routes" msgstr "路由" -#. i18n: file knetworkconfdlg.ui line 265 -#: rc.cpp:283 +#: knetworkconf/knetworkconfdlg.ui:265 #, no-c-format msgid "Default Gateway" msgstr "預設閘道" -#. i18n: file knetworkconfdlg.ui line 348 -#: rc.cpp:289 +#: knetworkconf/knetworkconfdlg.ui:348 #, no-c-format msgid "Default Gateway IP address" msgstr "預設閘道 IP 位址" -#. i18n: file knetworkconfdlg.ui line 373 -#: rc.cpp:292 +#: knetworkconf/knetworkconfdlg.ui:373 #, no-c-format msgid "Device:" msgstr "設備：" -#. i18n: file knetworkconfdlg.ui line 401 -#: rc.cpp:295 +#: knetworkconf/knetworkconfdlg.ui:401 #, no-c-format msgid "Network device where to send packets" msgstr "用哪個網路設備送出封包" -#. i18n: file knetworkconfdlg.ui line 432 -#: rc.cpp:298 +#: knetworkconf/knetworkconfdlg.ui:432 #, no-c-format msgid "Domain Name System" msgstr "網域名稱系統" -#. i18n: file knetworkconfdlg.ui line 443 -#: rc.cpp:301 +#: knetworkconf/knetworkconfdlg.ui:443 #, no-c-format msgid "Domain Name Servers" msgstr "網域名稱伺服器(DNS)" -#. i18n: file knetworkconfdlg.ui line 499 -#: rc.cpp:304 +#: knetworkconf/knetworkconfdlg.ui:499 #, no-c-format msgid "Move up the selected server on the list (higher priority)" msgstr "將選擇的伺服器往上移（較高優先順序）" -#. i18n: file knetworkconfdlg.ui line 513 -#: rc.cpp:307 +#: knetworkconf/knetworkconfdlg.ui:513 #, no-c-format msgid "Move down the selected server on the list (less priority)" msgstr "將選擇的伺服器往下移（較低優先順序）" -#. i18n: file knetworkconfdlg.ui line 637 -#: rc.cpp:319 +#: knetworkconf/knetworkconfdlg.ui:637 #, no-c-format msgid "Static Hosts" msgstr "靜態主機" -#. i18n: file knetworkconfdlg.ui line 738 -#: rc.cpp:337 +#: knetworkconf/knetworkconfdlg.ui:738 #, no-c-format msgid "Host name:" msgstr "主機名稱：" -#. i18n: file knetworkconfdlg.ui line 762 -#: rc.cpp:340 +#: knetworkconf/knetworkconfdlg.ui:762 #, no-c-format msgid "Domain name:" msgstr "網域名稱：" -#. i18n: file knetworkconfdlg.ui line 772 -#: rc.cpp:343 +#: knetworkconf/knetworkconfdlg.ui:772 #, no-c-format msgid "Network Profiles" msgstr "網路設定檔" -#. i18n: file knetworkconfdlg.ui line 783 -#: rc.cpp:346 +#: knetworkconf/knetworkconfdlg.ui:783 #, no-c-format msgid "Available Network Profiles" msgstr "可用的網路設定檔" -#. i18n: file knetworkconfdlg.ui line 792 -#: rc.cpp:349 +#: knetworkconf/knetworkconfdlg.ui:792 #, no-c-format msgid "Name" msgstr "名稱" -#. i18n: file knetworkconfdlg.ui line 821 -#: rc.cpp:352 +#: knetworkconf/knetworkconfdlg.ui:821 #, no-c-format msgid "&Load Selected" msgstr "載入選擇的(&L)" -#. i18n: file knetworkconfdlg.ui line 829 -#: rc.cpp:355 +#: knetworkconf/knetworkconfdlg.ui:829 #, no-c-format msgid "&Save Selected" msgstr "儲存選擇的(&S)" -#. i18n: file knetworkconfdlg.ui line 837 -#: rc.cpp:358 +#: knetworkconf/knetworkconfdlg.ui:837 #, no-c-format msgid "&Create New..." msgstr "建立新的(&C)..." -#. i18n: file knetworkconfdlg.ui line 845 -#: rc.cpp:361 +#: knetworkconf/knetworkconfdlg.ui:845 #, no-c-format msgid "&Delete Selected" msgstr "刪除選擇的(&D)" -#. i18n: file kreloadnetworkdlg.ui line 28 -#: knetworkconfigparser.cpp:303 rc.cpp:364 -#, no-c-format -msgid "Reloading Network" -msgstr "重新載入網路" - -#. i18n: file kreloadnetworkdlg.ui line 112 -#: rc.cpp:370 +#: knetworkconf/kreloadnetworkdlg.ui:111 #, no-c-format msgid "" "Please wait while the network is reloaded so\n" "the changes can take effect." msgstr "請稍候，等待網路重新載入，以便讓變更能生效。" -#. i18n: file tdeselectdistrodlg.ui line 16 -#: rc.cpp:374 +#: knetworkconf/tdeselectdistrodlg.ui:16 #, no-c-format msgid "Unsupported Platform" msgstr "不支援的平台" -#. i18n: file tdeselectdistrodlg.ui line 69 -#: rc.cpp:383 +#: knetworkconf/tdeselectdistrodlg.ui:69 #, no-c-format msgid "Do not ask again" msgstr "不要再詢問" -#. i18n: file tdeselectdistrodlg.ui line 94 -#: rc.cpp:386 +#: knetworkconf/tdeselectdistrodlg.ui:94 #, no-c-format msgid "" -"

Your Platform is Not Supported

" -"" +"

Your Platform is Not Supported" msgstr "

未支援您的平台

" -#. i18n: file tdeselectdistrodlg.ui line 102 -#: rc.cpp:389 +#: knetworkconf/tdeselectdistrodlg.ui:102 #, no-c-format msgid "" -"You may choose one of the following supported platforms if you are sure " -"your platform behaves the same as the chosen one. Please be sure, because your " -"current network configuration could be damaged." -msgstr "如果您十分確定您的平台的行為與以下的平台一樣，您可以選擇其中一個。但請您要十分確定，因為您的網路設定可能會損毀。" - -#: kadddevicecontainer.cpp:53 -msgid "&Advanced Settings" -msgstr "進階設定(&A)" - -#: kadddevicecontainer.cpp:54 kadddevicecontainer.cpp:55 -msgid "Toggle between advanced and basic settings" -msgstr "切換基本或進階設定" - -#: kadddevicecontainer.cpp:57 -msgid "Apply changes" -msgstr "套用變更" - -#: kadddevicecontainer.cpp:59 -msgid "Forget changes" -msgstr "丟棄變更" - -#: kadddevicecontainer.cpp:129 kadddnsserverdlg.ui.h:42 -#: kaddknownhostdlg.ui.h:25 -msgid "The format of the specified IP address is not valid." -msgstr "指定的 IP 位址格式不正確。" - -#: kadddevicecontainer.cpp:132 -msgid "The format of the specified netmask is not valid." -msgstr "網路遮罩格式不正確。" - -#: kadddevicecontainer.cpp:135 -msgid "The format of the specified broadcast is not valid." -msgstr "網路廣播位址格式不正確。" - -#: kadddevicecontainer.cpp:138 -msgid "The format of the specified Gateway is not valid." -msgstr "閘道位址格式不正確。" - -#: kadddevicecontainer.cpp:174 -msgid "Basic Settings" -msgstr "基本設定" - -#: kadddevicecontainer.cpp:179 -msgid "Advanced Settings" -msgstr "進階設定" - -#: kprofileslistviewtooltip.h:84 -msgid "Network Configuration of this Profile:" -msgstr "此設定檔的網路設定：" - -#: kprofileslistviewtooltip.h:94 -#, c-format -msgid "

Interface: %1" -msgstr "

介面： %1" - -#: kprofileslistviewtooltip.h:95 -#, c-format -msgid "
Type: %1" -msgstr "
型態： %1" - -#: kprofileslistviewtooltip.h:101 -#, c-format -msgid "
Boot Protocol: %1" -msgstr "
開機協定： %1" - -#: kprofileslistviewtooltip.h:104 -#, c-format -msgid "
IP Address: %1" -msgstr "
IP 位址： %1" - -#: kprofileslistviewtooltip.h:105 -#, c-format -msgid "
Broadcast Address: %1" -msgstr "
廣播位址： %1" - -#: kprofileslistviewtooltip.h:107 -#, c-format -msgid "
On Boot: %1" -msgstr "
開機時啟動： %1" - -#: kprofileslistviewtooltip.h:111 -#, c-format -msgid "

Default Gateway: %1" -msgstr "

預設閘道： %1" - -#: kprofileslistviewtooltip.h:113 -#, c-format -msgid "
Domain Name: %1" -msgstr "
網域名稱： %1" - -#: kprofileslistviewtooltip.h:114 -#, c-format -msgid "
Machine Name: %1" -msgstr "
機器名稱： %1" - -#: kprofileslistviewtooltip.h:118 -#, c-format -msgid "
DNS Name Server: %1" -msgstr "
DNS 名稱伺服器： %1" - -#: kaddknownhostdlg.ui.h:29 -msgid "You must add at least one alias for the specified IP address." -msgstr "您必須為這個 IP 位址至少指定一個別名。" - -#: kaddknownhostdlg.ui.h:29 -msgid "Insufficient Aliases" -msgstr "不適當的別名" - -#: kaddknownhostdlg.ui.h:63 -msgid "Edit Alias" -msgstr "編輯別名" - -#: kaddknownhostdlg.ui.h:64 kaddknownhostdlg.ui.h:92 -msgid "Alias:" -msgstr "別名：" - -#: kaddknownhostdlg.ui.h:91 -msgid "Add New Alias" -msgstr "新增別名" - -#: _translatorinfo.cpp:1 -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "Frank Weng (a.k.a. Franklin)" - -#: _translatorinfo.cpp:3 -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "franklin at goodhorse dot idv dot tw" - -#: version.h:5 -msgid "" -"KNetworkConf - A Trinity Control Center module to configure TCP/IP settings." -msgstr "KNetworkConf - TDE 控制中心的模組，用於設定 TCP/IP。" - -#: knetworkconfmodule.cpp:94 -msgid "KNetworkConf" -msgstr "KNetworkConf" - -#: knetworkconfmodule.cpp:97 -msgid "Lead Developer" -msgstr "主要開發者" - -#: knetworkconfmodule.cpp:99 -msgid "Provided the Network backend which KNetworkConf relies on." -msgstr "提供 KNetworkConf 使用的網路後端。" - -#: knetworkconfmodule.cpp:101 -msgid "Conectiva Linux Support" -msgstr "Conectiva Linux 支援" - -#: knetworkconfmodule.cpp:103 -msgid "Documentation maintainer, and German translator" -msgstr "文件維護，德文翻譯" - -#: knetworkconfmodule.cpp:105 -msgid "Various bugfixes and features" -msgstr "修正許多錯誤與提供許多功能" - -#: knetworkconfmodule.cpp:107 -msgid "Various bugfixes and Brazilian Portuguese translator" -msgstr "修正許多錯誤，及巴西、葡萄牙翻譯" - -#: knetworkconfmodule.cpp:113 -msgid "" -"%1Network configuration%2This module allows you to configure your TCP/IP " -"settings.%3" -msgstr "%1網路設定%2這個模組允許您設定您的 TCP/IP。%3" - -#: kadddnsserverdlg.ui.h:54 -msgid "You have to type an alias first." -msgstr "您必須先輸入一個別名。" - -#: kadddnsserverdlg.ui.h:54 -msgid "Invalid Text" -msgstr "不合法的文字" - -#: knetworkconfigparser.cpp:41 -#, fuzzy -msgid "" -"Could not find the backend script for the network configuration detection. " -"Something is wrong with your installation.\n" -" Please check that \n" -"{TDE_PATH}/%1 \n" -"file is present." +"You may choose one of the following supported platforms if you are sure your platform behaves the same as the chosen one. Please be sure, because " +"your current network configuration could be damaged." msgstr "" -"找不到偵測網路設定的後端文稿。您的系統可能有問題。\n" -"請確定 {TDE_PATH}/%1 檔案存在。" - -#: knetworkconfigparser.cpp:42 -msgid "Could Not Find Network Configuration Backend Script" -msgstr "找不到網路設定的後端文稿" - -#: knetworkconfigparser.cpp:65 knetworkconfigparser.cpp:95 -#: knetworkconfigparser.cpp:320 knetworkconfigparser.cpp:1016 -msgid "" -"Could not execute backend script for the network configuration detection. " -"Something is wrong with your installation." -msgstr "無法執行偵測網路設定的後端文稿。您的系統可能有問題。" - -#: knetworkconfigparser.cpp:66 knetworkconfigparser.cpp:96 -#: knetworkconfigparser.cpp:321 knetworkconfigparser.cpp:1017 -msgid "Could Not Launch Network Configuration Backend Script" -msgstr "無法叫出網路設定後端文稿" - -#: knetworkconfigparser.cpp:113 knetworkconfigparser.cpp:837 -msgid "Could not parse the XML output from the network configuration backend." -msgstr "無法剖析網路設定後端的 XML 輸出。" - -#: knetworkconfigparser.cpp:114 -msgid "Error While Listing Network Interfaces" -msgstr "列出網路介面時發生錯誤" - -#: knetworkconfigparser.cpp:191 -msgid "Could not open file /proc/net/route." -msgstr "無法開啟檔案 /proc/net/route。" - -#: knetworkconfigparser.cpp:192 -msgid "Could Not Open File" -msgstr "無法開啟檔案" - -#: knetworkconfigparser.cpp:304 -msgid "%1Please wait while saving the network settings...%2" -msgstr "%1請稍候，正在儲存網路設定...%2" - -#: knetworkconfigparser.cpp:762 -msgid "Ethernet Network Device" -msgstr "乙太網路設備" - -#: knetworkconfigparser.cpp:764 -msgid "Wireless Network Device" -msgstr "無線網路設備" - -#: knetworkconfigparser.cpp:838 -msgid "Error Loading The Network Configuration" -msgstr "載入網路設定時發生錯誤" - -#: knetworkconfigparser.cpp:1030 -msgid "" -"Could not parse the list of supported platforms from the network configuration " -"backend." -msgstr "無法剖析網路後端送來的支援平台清單。" - -#: knetworkconfigparser.cpp:1031 -msgid "Error Obtaining Supported Platforms List" -msgstr "取得支援平台清單時發生錯誤" +"如果您十分確定您的平台的行為與以下的平台一樣，您可以選擇其中一個。但請" +"您要十分確定，因為您的網路設定可能會損毀。" -- cgit v1.2.3