# WEB-Translator generated file. UTF-8 test:äëïöü # Copyright (C) 2001 Free Software Foundation, Inc. # Frikkie Thirion , 2001,2002. # msgid "" msgstr "" "Project-Id-Version: kcmlaptop VERSION\n" "POT-Creation-Date: 2006-10-14 02:36+0200\n" "PO-Revision-Date: 2002-11-07 11:40+0200\n" "Last-Translator: WEB-Translator \n" "Language-Team: AFRIKAANS \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8-bit\n" #: battery.cpp:72 #, fuzzy msgid "&Show battery monitor" msgstr "Vertoon batery monitor" #: battery.cpp:74 msgid "This box enables the battery state icon in the panel" msgstr "" #: battery.cpp:79 #, fuzzy msgid "Show battery level percentage" msgstr "Vertoon batery monitor" #: battery.cpp:81 msgid "" "This box enables a text message near the battery state icon containing battery " "level percentage" msgstr "" #: battery.cpp:84 msgid "&Notify me whenever my battery becomes fully charged" msgstr "" #: battery.cpp:86 msgid "" "This box enables a dialog box that pops up when your battery becomes fully " "charged" msgstr "" #: battery.cpp:89 msgid "&Use a blank screen saver when running on battery" msgstr "" #: battery.cpp:103 #, fuzzy msgid "&Check status every:" msgstr "Bevestig status elke:" #: battery.cpp:105 msgid "" "Choose how responsive the laptop software will be when it checks the battery " "status" msgstr "" #: battery.cpp:106 msgid "" "_: keep short, unit in spinbox\n" "sec" msgstr "sek" #: battery.cpp:114 #, fuzzy msgid "Select Battery Icons" msgstr "Vertoon batery monitor" #: battery.cpp:125 #, fuzzy msgid "No &battery" msgstr "Nee batery" #: battery.cpp:126 #, fuzzy msgid "&Not charging" msgstr "Nie laai" #: battery.cpp:127 msgid "Char&ging" msgstr "Laai" #: battery.cpp:143 msgid "Current Battery Status" msgstr "" #: battery.cpp:174 #, fuzzy msgid "" "This panel controls whether the battery status monitor\n" "appears in the system tray and what it looks like." msgstr "" "Hierdie paneel kontroles hetsy die batery status\n" "monitor verskyn in die vasmeer en wat dit kyk hou van." #: battery.cpp:180 #, fuzzy msgid "&Start Battery Monitor" msgstr "Vertoon batery monitor" #: battery.cpp:276 #, fuzzy msgid "" "

Laptop Battery

This module allows you to monitor your batteries. To " "make use of this module, you must have power management system software " "installed. (And, of course, you should have batteries in your machine.)" msgstr "" "

Batery monitor

Hierdie module laat toe jy na monitor jou batterye. na " "maak gebruik van Hierdie module, jy moet het Apm geïnstalleer. (En, van " "natuurlik, jy moet het batterye in jou masjien.)" #: battery.cpp:286 msgid "" "The battery monitor has been started, but the tray icon is currently " "disabled. You can make it appear by selecting the Show battery monitor " "entry on this page and applying your changes." msgstr "" #: battery.cpp:361 msgid "Present" msgstr "" #: battery.cpp:367 #, fuzzy msgid "Not present" msgstr "Nie Geskakel" #: main.cpp:155 msgid "&Battery" msgstr "Batery" #: main.cpp:159 msgid "&Power Control" msgstr "Elektrisiteit Kontrole" #: main.cpp:163 msgid "Low Battery &Warning" msgstr "Lae Batery Waarskuwing" #: main.cpp:167 msgid "Low Battery &Critical" msgstr "Lae Batery Krities" #: main.cpp:179 msgid "Default Power Profiles" msgstr "" #: main.cpp:186 msgid "Button Actions" msgstr "" #: main.cpp:193 msgid "&ACPI Config" msgstr "" #: main.cpp:200 msgid "&APM Config" msgstr "" #: main.cpp:217 msgid "&Sony Laptop Config" msgstr "" #: main.cpp:227 #, fuzzy msgid "Laptop Battery Configuration" msgstr "Vertoon batery monitor" #: main.cpp:228 msgid "Battery Control Panel Module" msgstr "" #: main.cpp:230 msgid "(c) 1999 Paul Campbell" msgstr "" #: main.cpp:292 #, fuzzy msgid "" "

Laptop Battery

This module allows you to monitor your batteries. To " "make use of this module, you must have power management software installed. " "(And, of course, you should have batteries in your machine.)" msgstr "" "

Batery monitor

Hierdie module laat toe jy na monitor jou batterye. na " "maak gebruik van Hierdie module, jy moet het Apm geïnstalleer. (En, van " "natuurlik, jy moet het batterye in jou masjien.)" #: pcmcia.cpp:44 msgid "kcmlaptop" msgstr "" #: pcmcia.cpp:45 msgid "KDE Panel System Information Control Module" msgstr "" #: pcmcia.cpp:47 msgid "(c) 1999 - 2002 Paul Campbell" msgstr "" #: pcmcia.cpp:85 msgid "Version: " msgstr "Weergawe: " #: pcmcia.cpp:118 msgid "" "

PCMCIA Config

This module shows information about the PCMCIA cards in " "your system, if there are PCMCIA cards." msgstr "" "

Pcmcia Opstelling

Hierdie module vertoon informasie aangaande die " "Pcmcia kaarte in jou stelsel, as daar word Pcmcia kaarte." #: power.cpp:123 profile.cpp:76 msgid "Not Powered" msgstr "Nie Geskakel" #: power.cpp:124 msgid "" "Options in this box apply when the laptop is unplugged from the wall and has " "been idle for a while" msgstr "" #: buttons.cpp:128 power.cpp:129 warning.cpp:241 msgid "Standb&y" msgstr "Standby" #: power.cpp:130 power.cpp:223 msgid "Causes the laptop to change to a standby temporary-low power state" msgstr "" #: buttons.cpp:132 power.cpp:133 warning.cpp:247 msgid "&Suspend" msgstr "Suspendeer" #: power.cpp:134 power.cpp:227 msgid "Causes the laptop to change to a suspend 'save-to-ram' state" msgstr "" #: buttons.cpp:136 power.cpp:137 warning.cpp:253 msgid "H&ibernate" msgstr "Hiberneer" #: power.cpp:138 power.cpp:231 msgid "Causes the laptop to change to a hibernate 'save-to-disk' state" msgstr "" #: power.cpp:141 power.cpp:234 msgid "None" msgstr "" #: buttons.cpp:150 buttons.cpp:226 power.cpp:143 power.cpp:236 msgid "Brightness" msgstr "" #: power.cpp:144 power.cpp:237 msgid "Enables changing the laptop's back panel brightness" msgstr "" #: power.cpp:149 power.cpp:242 msgid "How bright to change the back panel" msgstr "" #: buttons.cpp:164 buttons.cpp:240 power.cpp:158 power.cpp:251 profile.cpp:102 #: profile.cpp:165 warning.cpp:192 #, fuzzy msgid "System performance" msgstr "Stelsel biep" #: power.cpp:159 power.cpp:252 msgid "Enables changing the laptop's performance profile" msgstr "" #: power.cpp:164 power.cpp:257 msgid "Which profile to change it to" msgstr "" #: buttons.cpp:178 buttons.cpp:254 power.cpp:173 power.cpp:266 profile.cpp:184 msgid "CPU throttle" msgstr "" #: power.cpp:174 power.cpp:267 msgid "Enables throttling the laptop's CPU" msgstr "" #: power.cpp:179 power.cpp:272 msgid "How much to throttle the laptop's CPU" msgstr "" #: power.cpp:195 power.cpp:285 msgid "Don't act if LAV is >" msgstr "" #: power.cpp:198 power.cpp:288 msgid "" "If enabled and the system load average is greater than this value none of the " "above options will be applied" msgstr "" #: power.cpp:204 #, fuzzy msgid "&Wait for:" msgstr "Wag vir:" #: power.cpp:206 power.cpp:296 msgid "How long the computer has to be idle before these values take effect" msgstr "" #: power.cpp:207 power.cpp:297 warning.cpp:81 warning.cpp:101 msgid "" "_: keep short, unit in spinbox\n" "min" msgstr "min" #: power.cpp:216 profile.cpp:140 msgid "Powered" msgstr "Geskakel" #: power.cpp:218 msgid "" "Options in this box apply when the laptop is plugged into the wall and has been " "idle for a while" msgstr "" #: buttons.cpp:204 power.cpp:222 msgid "Sta&ndby" msgstr "Standby" #: buttons.cpp:208 power.cpp:226 msgid "S&uspend" msgstr "Suspendeer" #: buttons.cpp:212 power.cpp:230 msgid "Hi&bernate" msgstr "Hiberneer" #: power.cpp:294 #, fuzzy msgid "Wai&t for:" msgstr "Wag vir:" #: power.cpp:304 msgid "" "This panel configures the behavior of the automatic power-down feature - it " "works as a sort of extreme screen saver. You can configure different timeouts " "and types of behavior depending on whether or not your laptop is plugged in to " "the mains supply." msgstr "" #: power.cpp:312 #, fuzzy msgid "" "Different laptops may respond to 'standby' in different ways - in many it is " "only a temporary state and may not be useful for you." msgstr "" "Ander skootrekenaars dalk mag antwoord na 'standby' in\n" "Ander maniere - in veel dit is slegs 'n tydelike\n" "staat en dalk mag nie wees bruikbare vir jy." #: acpi.cpp:148 apm.cpp:144 buttons.cpp:281 power.cpp:320 profile.cpp:216 #: sony.cpp:102 warning.cpp:291 #, c-format msgid "Version: %1" msgstr "Weergawe: %1" #: power.cpp:581 #, fuzzy msgid "" "

Laptop Power Control

This module allows you to control the power " "settings of your laptop and set timouts that will trigger state changes you can " "use to save power" msgstr "" "

Draagbare rekenaar Elektrisiteit Kontrole

Hierdie module laat toe jy na " "Kontrole die Elektrisiteit instellings van jou Draagbare rekenaar" #: warning.cpp:78 warning.cpp:79 #, fuzzy msgid "Critical &trigger:" msgstr "Krities sneller:" #: warning.cpp:82 warning.cpp:85 warning.cpp:102 warning.cpp:105 msgid "" "When this amount of battery life is left the actions below will be triggered" msgstr "" #: warning.cpp:84 warning.cpp:104 #, c-format msgid "" "_: keep short, unit in spinbox\n" "%" msgstr "%" #: warning.cpp:98 warning.cpp:99 #, fuzzy msgid "Low &trigger:" msgstr "Lae sneller:" #: warning.cpp:121 #, fuzzy msgid "Run &command:" msgstr "Hardloop opdrag:" #: warning.cpp:133 msgid "This command will be run when the battery gets low" msgstr "" #: warning.cpp:136 #, fuzzy msgid "&Play sound:" msgstr "Speel klank:" #: warning.cpp:148 msgid "This sound will play when the battery gets low" msgstr "" #: warning.cpp:151 #, fuzzy msgid "System &beep" msgstr "Stelsel biep" #: warning.cpp:154 msgid "The system will beep if this is enabled" msgstr "" #: warning.cpp:156 msgid "&Notify" msgstr "Inkennistelling" #: warning.cpp:166 msgid "Panel b&rightness" msgstr "" #: warning.cpp:168 msgid "If enabled the back panel brightness will change" msgstr "" #: warning.cpp:174 msgid "How bright or dim to make the back panel" msgstr "" #: warning.cpp:193 msgid "If enabled the laptop's power performance profile will change" msgstr "" #: warning.cpp:202 msgid "The performance profile to change to" msgstr "" #: profile.cpp:121 warning.cpp:215 msgid "CPU throttling" msgstr "" #: warning.cpp:216 msgid "If enabled the CPU performance will be throttled" msgstr "" #: warning.cpp:225 msgid "How much to throttle the CPU performance by" msgstr "" #: warning.cpp:237 msgid "System State Change" msgstr "" #: warning.cpp:238 msgid "You may choose one of the following to occur when the battery gets low" msgstr "" #: warning.cpp:242 msgid "Move the system into the standby state - a temporary lower power state" msgstr "" #: warning.cpp:248 msgid "Move the system into the suspend state - also known as 'save-to-ram'" msgstr "" #: warning.cpp:254 msgid "Move the system into the hibernate state - also known as 'save-to-disk'" msgstr "" #: warning.cpp:259 msgid "&Logout" msgstr "" #: buttons.cpp:140 buttons.cpp:216 warning.cpp:262 #, fuzzy msgid "System power off" msgstr "Stelsel biep" #: warning.cpp:263 msgid "Power the laptop off" msgstr "" #: warning.cpp:266 msgid "&None" msgstr "" #: warning.cpp:275 #, fuzzy msgid "" "This panel controls how and when you receive warnings that your battery power " "is going to run out VERY VERY soon." msgstr "" "Hierdie paneel kontroles hoe en wanneer jy ontvang waarskuwings\n" "wat jou batery elektrisiteit is gaan na hardloop uit Baie Baie binnekort." #: warning.cpp:277 #, fuzzy msgid "" "This panel controls how and when you receive warnings that your battery power " "is about to run out" msgstr "" "Hierdie paneel kontroles hoe en wanneer jy ontvang waarskuwings\n" "wat jou batery elektrisiteit is aangaande na hardloop uit" #: warning.cpp:570 warning.cpp:587 msgid "Only local files are currently supported." msgstr "Slegs plaaslike lêers word huidiglik ondersteunde." #: warning.cpp:598 msgid "" "

Low battery Warning

This module allows you to set an alarm in case your " "battery's charge is about to run out." msgstr "" #: acpi.cpp:64 msgid "" "This panel provides information about your system's ACPI implementation and " "lets you have access to some of the extra features provided by ACPI" msgstr "" #: acpi.cpp:69 msgid "" "NOTE: the Linux ACPI implementation is still a 'work in progress'. Some " "features, in particular suspend and hibernate are not yet available under 2.4 - " "and under 2.5 some particular ACPI implementations are still unstable, these " "check boxes let you only enable the things that work reliably. You should test " "these features very gingerly - save all your work, check them on and try a " "suspend/standby/hibernate from the popup menu on the battery icon in the panel " "if it fails to come back successfully uncheck the box again." msgstr "" #: acpi.cpp:79 apm.cpp:77 msgid "" "Some changes made on this page may require you to quit the laptop panel and " "start it again to take effect" msgstr "" #: acpi.cpp:85 apm.cpp:83 #, fuzzy msgid "Enable standby" msgstr "Standby:" #: acpi.cpp:87 apm.cpp:85 msgid "" "If checked this box enables transitions to the 'standby' state - a temporary " "powered down state" msgstr "" #: acpi.cpp:91 apm.cpp:89 #, fuzzy msgid "Enable &suspend" msgstr "Suspendeer" #: acpi.cpp:93 apm.cpp:91 msgid "" "If checked this box enables transitions to the 'suspend' state - a semi-powered " "down state, sometimes called 'suspend-to-ram'" msgstr "" #: acpi.cpp:98 #, fuzzy msgid "Enable &hibernate" msgstr "Hiberneer:" #: acpi.cpp:100 msgid "" "If checked this box enables transitions to the 'hibernate' state - a powered " "down state, sometimes called 'suspend-to-disk'" msgstr "" #: acpi.cpp:105 #, fuzzy msgid "Use software suspend for hibernate" msgstr "Hiberneer:" #: acpi.cpp:107 msgid "" "If checked this box enables transitions to the 'hibernate' state - a powered " "down state, sometimes called 'suspend-to-disk' - the kernel 'Software Suspend' " "mechanism will be used instead of using ACPI directly" msgstr "" #: acpi.cpp:117 msgid "Enable &performance profiles" msgstr "" #: acpi.cpp:119 msgid "" "If checked this box enables access to ACPI performance profiles - usually OK in " "2.4 and later" msgstr "" #: acpi.cpp:123 msgid "Enable &CPU throttling" msgstr "" #: acpi.cpp:125 msgid "" "If checked this box enables access to ACPI throttle speed changes - usually OK " "in 2.4 and later" msgstr "" #: acpi.cpp:129 msgid "" "If the above boxes are disabled then there is no 'helper' application set up to " "help change ACPI states, there are two ways you can enable this application, " "either make the file /proc/acpi/sleep writeable by anyone every time your " "system boots or use the button below to make the KDE ACPI helper application " "set-uid root" msgstr "" #: acpi.cpp:138 apm.cpp:107 msgid "Setup Helper Application" msgstr "" #: acpi.cpp:140 msgid "This button can be used to enable the ACPI helper application" msgstr "" #: acpi.cpp:169 apm.cpp:191 msgid "" "The %1 application does not seem to have the same size or checksum as when it " "was compiled we do NOT recommend you proceed with making it setuid-root without " "further investigation" msgstr "" #: acpi.cpp:172 acpi.cpp:182 acpi.cpp:194 apm.cpp:174 apm.cpp:194 apm.cpp:204 #: apm.cpp:216 sony.cpp:115 sony.cpp:127 msgid "KLaptopDaemon" msgstr "" #: acpi.cpp:172 apm.cpp:194 msgid "Run Nevertheless" msgstr "" #: acpi.cpp:180 apm.cpp:202 msgid "" "You will need to supply a root password to allow the privileges of the " "klaptop_acpi_helper to change." msgstr "" #: acpi.cpp:193 msgid "" "The ACPI helper cannot be enabled because kdesu cannot be found. Please make " "sure that it is installed correctly." msgstr "" #: acpi.cpp:276 #, fuzzy msgid "" "

ACPI Setup

This module allows you to configure ACPI for your system" msgstr "" "

Draagbare rekenaar Elektrisiteit Kontrole

Hierdie module laat toe jy na " "Kontrole die Elektrisiteit instellings van jou Draagbare rekenaar" #: sony.cpp:69 msgid "" "This panel allows you to control some of the features of the\n" "'sonypi' device for your laptop - you should not enable the options below if " "you\n" "also use the 'sonypid' program in your system" msgstr "" #: sony.cpp:73 #, fuzzy msgid "Enable &scroll bar" msgstr "Hiberneer:" #: sony.cpp:74 msgid "When checked this box enables the scrollbar so that it works under KDE" msgstr "" #: sony.cpp:78 msgid "&Emulate middle mouse button with scroll bar press" msgstr "" #: sony.cpp:79 msgid "" "When checked this box enables pressing the scroll bar to act in the same way as " "pressing the middle button on a 3 button mouse" msgstr "" #: sony.cpp:88 msgid "" "The /dev/sonypi is not accessable, if you wish to use the above features its\n" "protections need to be changed. Clicking on the button below will change them\n" msgstr "" #: sony.cpp:91 msgid "Setup /dev/sonypi" msgstr "" #: sony.cpp:93 msgid "This button can be used to enable the sony specific features" msgstr "" #: sony.cpp:113 msgid "" "You will need to supply a root password to allow the protections of /dev/sonypi " "to be changed." msgstr "" #: sony.cpp:126 msgid "" "The /dev/sonypi protections cannot be changed because kdesu cannot be found. " "Please make sure that it is installed correctly." msgstr "" #: sony.cpp:187 #, fuzzy msgid "" "

Sony Laptop Hardware Setup

This module allows you to configure some " "Sony laptop hardware for your system" msgstr "" "

Draagbare rekenaar Elektrisiteit Kontrole

Hierdie module laat toe jy na " "Kontrole die Elektrisiteit instellings van jou Draagbare rekenaar" #: profile.cpp:77 msgid "" "Items in this box take effect whenever the laptop is unplugged from the wall" msgstr "" #: profile.cpp:81 profile.cpp:145 msgid "Back panel brightness" msgstr "" #: profile.cpp:82 profile.cpp:146 msgid "Enables the changing of the back panel brightness" msgstr "" #: profile.cpp:89 profile.cpp:153 msgid "How bright it should be when it is changed" msgstr "" #: profile.cpp:103 profile.cpp:166 msgid "Enables the changing of the system performance profile" msgstr "" #: profile.cpp:108 profile.cpp:173 msgid "The new system performance profile to change to" msgstr "" #: profile.cpp:122 profile.cpp:185 msgid "Enables the throttling of the CPU performance" msgstr "" #: profile.cpp:129 profile.cpp:192 msgid "How much to throttle the CPU by" msgstr "" #: profile.cpp:141 msgid "" "Items in this box take effect whenever the laptop is plugged into the wall" msgstr "" #: profile.cpp:205 #, fuzzy msgid "" "This panel allows you to set default values for system attributes so that they " "change when the laptop is plugged in to the wall or running on batteries." msgstr "" "

Draagbare rekenaar Elektrisiteit Kontrole

Hierdie module laat toe jy na " "Kontrole die Elektrisiteit instellings van jou Draagbare rekenaar" #: profile.cpp:211 msgid "" "You can also set options for these values that will be set by low battery " "conditions, or system inactivity in the other panels" msgstr "" #: profile.cpp:411 #, fuzzy msgid "" "

Laptop Power Profile Setup

This module allows you to configure default " "values for static laptop system attributes that will change when the laptop is " "plugged in or unplugged from the wall." msgstr "" "

Draagbare rekenaar Elektrisiteit Kontrole

Hierdie module laat toe jy na " "Kontrole die Elektrisiteit instellings van jou Draagbare rekenaar" #: buttons.cpp:122 msgid "Lid Switch Closed" msgstr "" #: buttons.cpp:124 msgid "Select which actions will occur when the laptop's lid is closed" msgstr "" #: buttons.cpp:129 buttons.cpp:205 msgid "Causes the laptop to move into the standby temporary low-power state" msgstr "" #: buttons.cpp:133 buttons.cpp:209 msgid "Causes the laptop to move into the suspend 'save-to-ram' state" msgstr "" #: buttons.cpp:137 buttons.cpp:213 msgid "Causes the laptop to move into the hibernate 'save-to-disk' state" msgstr "" #: buttons.cpp:141 buttons.cpp:217 msgid "Causes the laptop to power down" msgstr "" #: buttons.cpp:144 buttons.cpp:220 msgid "Logout" msgstr "" #: buttons.cpp:145 buttons.cpp:221 msgid "Causes you to be logged out" msgstr "" #: buttons.cpp:148 msgid "&Off" msgstr "Af" #: buttons.cpp:151 buttons.cpp:227 msgid "Causes the back panel brightness to be set" msgstr "" #: buttons.cpp:157 buttons.cpp:232 msgid "How bright the back panel will be set to" msgstr "" #: buttons.cpp:165 buttons.cpp:241 msgid "Causes the performance profile to be changed" msgstr "" #: buttons.cpp:170 buttons.cpp:246 msgid "The performance profile to switch to" msgstr "" #: buttons.cpp:179 buttons.cpp:255 msgid "Causes the CPU to be throttled back" msgstr "" #: buttons.cpp:184 buttons.cpp:260 msgid "How much to throttle back the CPU" msgstr "" #: buttons.cpp:198 msgid "Power Switch Pressed" msgstr "" #: buttons.cpp:200 msgid "" "Select which actions will occur when the laptop's power button is pressed" msgstr "" #: buttons.cpp:224 msgid "O&ff" msgstr "Af" #: buttons.cpp:272 msgid "" "This panel enables actions that are triggered when the lid closure switch or " "power switch on your laptop is pressed. Some laptops may already automatically " "do things like this, if you cannot disable them in your BIOS you probably " "should not enable anything in this panel." msgstr "" #: buttons.cpp:614 #, fuzzy msgid "" "

Laptop Power Control

This module allows you to configure the power " "switch or lid closure switch on your laptop so they can trigger system actions" msgstr "" "

Draagbare rekenaar Elektrisiteit Kontrole

Hierdie module laat toe jy na " "Kontrole die Elektrisiteit instellings van jou Draagbare rekenaar" #: apm.cpp:64 msgid "" "This panel lets you configure your APM system and lets you have access to some " "of the extra features provided by it" msgstr "" #: apm.cpp:69 msgid "" "NOTE: some APM implementations have buggy suspend/standby implementations. You " "should test these features very gingerly - save all your work, check them on " "and try a suspend/standby from the popup menu on the battery icon in the panel " "if it fails to come back successfully uncheck the box again." msgstr "" #: apm.cpp:98 msgid "" "If the above boxes are disabled then there is no 'helper' application set up to " "help change APM states, there are two ways you can enable this application, " "either make the file /proc/apm writeable by anyone every time your system boots " "or use the button below to make the %1 application set-uid root" msgstr "" #: apm.cpp:109 msgid "This button can be used to enable the APM helper application" msgstr "" #: apm.cpp:114 msgid "" "Your system seems to have 'Software Suspend' installed, this can be used to " "hibernate or 'suspend to disk' your system if you want to use this for " "hibernation check the box below" msgstr "" #: apm.cpp:119 #, fuzzy msgid "Enable software suspend for hibernate" msgstr "Hiberneer:" #: apm.cpp:121 msgid "" "If checked this box enables transitions to the 'hibernate' state using the " "'Software Suspend' mechanism" msgstr "" #: apm.cpp:124 msgid "" "If the above box is disabled then you need to be logged in as root or need a " "helper application to invoke the Software Suspend utility - KDE provides a " "utility to do this, if you wish to use it you must make it set-uid root, the " "button below will do this for you" msgstr "" #: apm.cpp:132 msgid "Setup SS Helper Application" msgstr "" #: apm.cpp:134 msgid "" "This button can be used to enable the Software Suspend helper application" msgstr "" #: apm.cpp:160 msgid "" "You will need to supply a root password to allow the privileges of the %1 " "application to change." msgstr "" #: apm.cpp:173 msgid "" "%1 cannot be enabled because kdesu cannot be found. Please make sure that it " "is installed correctly." msgstr "" #: apm.cpp:215 msgid "" "The Software Suspend helper cannot be enabled because kdesu cannot be found. " "Please make sure that it is installed correctly." msgstr "" #: apm.cpp:279 #, fuzzy msgid "" "

APM Setup

This module allows you to configure APM for your system" msgstr "" "

Draagbare rekenaar Elektrisiteit Kontrole

Hierdie module laat toe jy na " "Kontrole die Elektrisiteit instellings van jou Draagbare rekenaar" #: _translatorinfo.cpp:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "WEB-Vertaler (http://kde.af.org.za)" #: _translatorinfo.cpp:3 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "frix@expertron.co.za" #, fuzzy #~ msgid "System Performance" #~ msgstr "Stelsel biep" #~ msgid "" #~ "\n" #~ "If you make /usr/bin/apm setuid then you will also\n" #~ "be able to choose 'suspend' and 'standby' in the\n" #~ "above dialog - check out the help button below to\n" #~ "find out how to do this" #~ msgstr "" #~ "\n" #~ "As jy maak / usr / bin /apm setuid dan word jy sal asook\n" #~ "wees in staat na kies 'suspend' en 'standby' in die\n" #~ "boonste dialoog - bevestig uit die hulp knoppie onder na\n" #~ "soek uit hoe na doen hierdie" #~ msgid "" #~ "\n" #~ "Your system does not support suspend/standby" #~ msgstr "" #~ "\n" #~ "Jou stelsel doen nie ondersteun suspendeer/standby" #~ msgid "No PCMCIA controller detected" #~ msgstr "Nee Pcmcia beheerder opgespoor" #~ msgid "Card 0:" #~ msgstr "Kaart 0:" #~ msgid "Card 1:" #~ msgstr "Kaart 1:" #~ msgid " " #~ msgstr " " #, fuzzy #~ msgid "

Laptop Battery

This module allows you to monitor your batteries. To make use of this module, you must have APM or ACPI installed. (And, of course, you should have batteries in your machine.)" #~ msgstr "

Batery monitor

Hierdie module laat toe jy na monitor jou batterye. na maak gebruik van Hierdie module, jy moet het Apm van Acpi geïnstalleer. (En, van natuurlik, jy moet het batterye in jou masjien.)" #, fuzzy #~ msgid "Not powered" #~ msgstr "Nie Geskakel" #~ msgid "Icons" #~ msgstr "Ikoone" #~ msgid "" #~ "\n" #~ "Currently ACPI suspend/standby is not supported" #~ msgstr "" #~ "\n" #~ "Huidiglik Acpi suspendeer/standby is nie ondersteunde" #, fuzzy #~ msgid "

Brightness Laptop Hardware Setup

This module allows you to configure backpanel brightness on some laptop hardware" #~ msgstr "

Draagbare rekenaar Elektrisiteit Kontrole

Hierdie module laat toe jy na Kontrole die Elektrisiteit instellings van jou Draagbare rekenaar" #~ msgid "Setup ACPI..." #~ msgstr "Opstelling Acpi..." #~ msgid "Configure ACPI Interface" #~ msgstr "Konfigureer Acpi Koppelvlak" #~ msgid "Standby:" #~ msgstr "Standby:" #~ msgid "Suspend:" #~ msgstr "Suspendeer:" #~ msgid "Hibernate:" #~ msgstr "Hiberneer:"