This list shows all cost types available and what the self/inclusive cost of " "the current selected function is for that cost type.
" "By choosing a cost type from the list, you change the cost type of costs " "shown all over KCachegrind to be the selected one.
" msgstr "" #: costtypeview.cpp:98 msgid "Set Secondary Event Type" msgstr "" #: costtypeview.cpp:100 msgid "Remove Secondary Event Type" msgstr "" #: costtypeview.cpp:105 msgid "Edit Long Name" msgstr "" #: costtypeview.cpp:106 msgid "Edit Short Name" msgstr "" #: costtypeview.cpp:107 msgid "Edit Formula" msgstr "" #: costtypeview.cpp:115 msgid "New Cost Type ..." msgstr "" #: costtypeview.cpp:149 costtypeview.cpp:154 #, c-format msgid "New%1" msgstr "" #: costtypeview.cpp:155 #, c-format msgid "New Cost Type %1" msgstr "" #: sourceitem.cpp:125 msgid "Jump %1 of %2 times to %3" msgstr "" #: sourceitem.cpp:130 msgid "Jump %1 times to %2" msgstr "" #: costlistitem.cpp:60 #, c-format msgid "" "_n: (%n item skipped)\n" "(%n items skipped)" msgstr "" #: traceitemview.cpp:53 msgid "No description available" msgstr "" #. i18n: file partselectionbase.ui line 16 #: rc.cpp:324 toplevel.cpp:281 toplevel.cpp:581 #, no-c-format msgid "Parts Overview" msgstr "" #: toplevel.cpp:288 msgid "" "The Parts Overview" "A trace consists of multiple trace parts when there are several profile data " "files from one profile run. The Trace Part Overview dockable shows these, " "horizontally ordered in execution time; the rectangle sizes are proportional to " "the total cost spent in the parts. You can select one or several parts to " "constrain all costs shown to these parts only.
" "The parts are further subdivided: there is a partitioning and an callee " "split mode: " "
This is a purely fictional 'most probable' call stack. It is built up by " "starting with the current selected function and adds the callers/callees with " "highest cost at the top and to bottom.
" "The Cost and Calls columns show the cost used for all calls " "from the function in the line above.
" msgstr "" #: toplevel.cpp:333 msgid "Flat Profile" msgstr "" #: toplevel.cpp:343 msgid "" "The Flat Profile" "The flat profile contains a group and a function selection list. The group " "list contains all groups where costs are spent in, depending on the chosen " "group type. The group list is hidden when group type 'Function' is selected." "
" "
The function list contains the functions of the selected group (or all for " "'Function' group type), ordered by the costs spent therein. Functions with " "costs less than 1% are hidden on default.
" msgstr "" #. i18n: file dumpselectionbase.ui line 16 #: rc.cpp:84 toplevel.cpp:357 toplevel.cpp:609 #, no-c-format msgid "Profile Dumps" msgstr "" #: toplevel.cpp:367 msgid "" "Profile Dumps" "This dockable shows in the top part the list of loadable profile dumps in " "all subdirectories of: " "
On selecting a profile dump, information for it is shown in the bottom area " "of the dockable: " "
Make a copy of the current layout.
" msgstr "" #: toplevel.cpp:466 msgid "" "Remove Current Layout" "Delete current layout and make the previous active.
" msgstr "" #: toplevel.cpp:470 msgid "&Go to Next" msgstr "" #: toplevel.cpp:474 msgid "Go to Next Layout" msgstr "" #: toplevel.cpp:477 msgid "&Go to Previous" msgstr "" #: toplevel.cpp:481 msgid "Go to Previous Layout" msgstr "" #: toplevel.cpp:484 msgid "&Restore to Default" msgstr "" #: toplevel.cpp:487 msgid "Restore Layouts to Default" msgstr "" #: toplevel.cpp:490 msgid "&Save as Default" msgstr "" #: toplevel.cpp:493 msgid "Save Layouts as Default" msgstr "" #: toplevel.cpp:504 msgid "NewOpen new empty KCachegrind window.
" msgstr "" #: toplevel.cpp:507 msgid "&Add..." msgstr "" #: toplevel.cpp:510 msgid "" "Add Profile Data" "This opens an additional profile data file in the current window.
" msgstr "" #: toplevel.cpp:522 msgid "Reload Profile DataThis loads any new created parts, too.
" msgstr "" #: toplevel.cpp:526 msgid "&Export Graph" msgstr "" #: toplevel.cpp:530 msgid "" "Export Call Graph" "Generates a file with extension .dot for the tools of the GraphViz " "package.
" msgstr "" #: toplevel.cpp:536 msgid "&Force Dump" msgstr "" #: toplevel.cpp:545 msgid "" "Force Dump" "This forces a dump for a Callgrind profile run in the current directory. " "This action is checked while KCachegrind looks for the dump. If the dump is " "finished, it automatically reloads the current trace. If this is the one from " "the running Callgrind, the new created trace part will be loaded, too.
" "Force dump creates a file 'callgrind.cmd', and checks every second for its " "existence. A running Callgrind will detect this file, dump a trace part, and " "delete 'callgrind.cmd'. The deletion is detected by KCachegrind, and it does a " "Reload. If there's no Callgrind running, press 'Force Dump' again to " "cancel the dump request. This deletes 'callgrind.cmd' itself and stops polling " "for a new dump.
" "Note: A Callgrind run only detects existence of 'callgrind.cmd' " "when actively running a few milliseconds, i.e. not " "sleeping. Tip: For a profiled GUI program, you can awake Callgrind e.g. by " "resizing a window of the program.
" msgstr "" #: toplevel.cpp:570 msgid "" "Open Profile Data" "This opens a profile data file, with possible multiple parts
" msgstr "" #: toplevel.cpp:586 msgid "Show/Hide the Parts Overview Dockable" msgstr "" #: toplevel.cpp:590 msgid "Call Stack" msgstr "" #: toplevel.cpp:595 msgid "Show/Hide the Call Stack Dockable" msgstr "" #. i18n: file functionselectionbase.ui line 16 #: rc.cpp:297 toplevel.cpp:599 #, no-c-format msgid "Function Profile" msgstr "" #: toplevel.cpp:604 msgid "Show/Hide the Function Profile Dockable" msgstr "" #: toplevel.cpp:614 msgid "Show/Hide the Profile Dumps Dockable" msgstr "" #: toplevel.cpp:619 msgid "Show Relative Costs" msgstr "" #: toplevel.cpp:626 msgid "Show Absolute Costs" msgstr "" #: toplevel.cpp:629 msgid "Show relative instead of absolute costs" msgstr "" #: toplevel.cpp:633 msgid "Percentage Relative to Parent" msgstr "" #: toplevel.cpp:639 msgid "Show percentage costs relative to parent" msgstr "" #: toplevel.cpp:643 msgid "" "Show percentage costs relative to parent" "If this is switched off, percentage costs are always shown relative to the " "total cost of the profile part(s) that are currently browsed. By turning on " "this option, percentage cost of shown cost items will be relative to the parent " "cost item." "
| Cost Type | " "Parent Cost |
| Function Cumulative | " "Total |
| Function Self | " "Function Group (*) / Total |
| Call | " "Function Cumulative |
| Source Line | " "Function Cumulative |
(*) Only if function grouping is switched on (e.g. ELF object grouping)." msgstr "" #: toplevel.cpp:658 msgid "Do Cycle Detection" msgstr "" #: toplevel.cpp:664 msgid "Skip Cycle Detection" msgstr "" #: toplevel.cpp:667 msgid "" "Detect recursive cycles" "
If this is switched off, the treemap drawing will show black areas when a " "recursive call is made instead of drawing the recursion ad infinitum. Note that " "the size of black areas often will be wrong, as inside recursive cycles the " "cost of calls cannot be determined; the error is small, however, for false " "cycles (see documentation)." "
The correct handling for cycles is to detect them and collapse all functions " "of a cycle into a virtual function, which is done when this option is selected. " "Unfortunately, with GUI applications, this often will lead to huge false " "cycles, making the analysis impossible; therefore, there is the option to " "switch this off." msgstr "" #: toplevel.cpp:689 toplevel.cpp:729 msgid "Go back in function selection history" msgstr "" #: toplevel.cpp:695 toplevel.cpp:741 msgid "Go forward in function selection history" msgstr "" #: toplevel.cpp:701 toplevel.cpp:715 msgid "" "Go Up" "
Go to last selected caller of current function. If no caller was visited, " "use that with highest cost.
" msgstr "" #: toplevel.cpp:707 msgid "&Up" msgstr "" #: toplevel.cpp:746 toplevel.cpp:1651 msgid "Primary Event Type" msgstr "" #: toplevel.cpp:748 msgid "Select primary event type of costs" msgstr "" #: toplevel.cpp:758 toplevel.cpp:1654 msgid "Secondary Event Type" msgstr "" #: toplevel.cpp:760 msgid "Select secondary event type for cost e.g. shown in annotations" msgstr "" #: functionselection.cpp:243 toplevel.cpp:768 msgid "Grouping" msgstr "" #: toplevel.cpp:771 msgid "Select how functions are grouped into higher level cost items" msgstr "" #: functionselection.cpp:52 toplevel.cpp:777 msgid "(No Grouping)" msgstr "" #: toplevel.cpp:787 msgid "Split" msgstr "" #: toplevel.cpp:791 msgid "Show two information panels" msgstr "" #: toplevel.cpp:795 msgid "Split Horizontal" msgstr "" #: toplevel.cpp:800 msgid "Change Split Orientation when main window is split." msgstr "" #: toplevel.cpp:808 msgid "Tip of the &Day..." msgstr "" #: toplevel.cpp:809 msgid "Show \"Tip of the Day\"" msgstr "" #: toplevel.cpp:1012 toplevel.cpp:1061 msgid "" "cachegrind.out* callgrind.out*|Callgrind Profile Data\n" "*|All Files" msgstr "" #: toplevel.cpp:1014 msgid "Select Callgrind Profile Data" msgstr "" #: toplevel.cpp:1063 msgid "Add Callgrind Profile Data" msgstr "" #: toplevel.cpp:1221 toplevel.cpp:1574 msgid "(Hidden)" msgstr "" #: toplevel.cpp:1626 msgid "Hide" msgstr "" #: toplevel.cpp:1659 msgid "Show Absolute Cost" msgstr "" #: toplevel.cpp:1662 msgid "Show Relative Cost" msgstr "" #: toplevel.cpp:1693 msgid "Go Forward" msgstr "" #: toplevel.cpp:1694 msgid "Go Up" msgstr "" #: toplevel.cpp:1926 #, c-format msgid "Layout Count: %1" msgstr "" #: toplevel.cpp:1933 msgid "No profile data file loaded." msgstr "" #: toplevel.cpp:1942 msgid "Total %1 Cost: %2" msgstr "" #: toplevel.cpp:1954 msgid "No event type selected" msgstr "" #: toplevel.cpp:2199 toplevel.cpp:2235 toplevel.cpp:2271 msgid "(No Stack)" msgstr "" #: toplevel.cpp:2205 msgid "(No next function)" msgstr "" #: toplevel.cpp:2241 msgid "(No previous function)" msgstr "" #: toplevel.cpp:2276 msgid "(No Function Up)" msgstr "" #. i18n: file dumpselectionbase.ui line 906 #: instrview.cpp:125 rc.cpp:264 sourceview.cpp:50 #, no-c-format msgid "#" msgstr "" #: callview.cpp:45 instrview.cpp:127 sourceview.cpp:52 msgid "Cost 2" msgstr "" #: instrview.cpp:129 msgid "Hex" msgstr "" #: instrview.cpp:131 tabview.cpp:313 msgid "Assembler" msgstr "" #: instrview.cpp:132 msgid "Source Position" msgstr "" #: instrview.cpp:163 msgid "" "Annotated Assembler" "The annotated assembler list shows the machine code instructions of the " "current selected function together with (self) cost spent while executing an " "instruction. If this is a call instruction, lines with details on the call " "happening are inserted into the source: the cost spent inside of the call, the " "number of calls happening, and the call destination.
" "The disassembler output shown is generated with the 'objdump' utility from " "the 'binutils' package.
" "Select a line with call information to make the destination function of this " "call current.
" msgstr "" #: callgraphview.cpp:2397 callgraphview.cpp:2401 callgraphview.cpp:2419 #: callview.cpp:123 callview.cpp:128 coverageview.cpp:166 instrview.cpp:191 #: sourceview.cpp:116 msgid "Go to '%1'" msgstr "" #: instrview.cpp:195 #, c-format msgid "Go to Address %1" msgstr "" #: instrview.cpp:207 msgid "Hex Code" msgstr "" #: instrview.cpp:426 msgid "There is no instruction info in the profile data file." msgstr "" #: instrview.cpp:428 msgid "For the Valgrind Calltree Skin, rerun with option" msgstr "" #: instrview.cpp:429 msgid " --dump-instr=yes" msgstr "" #: instrview.cpp:430 msgid "To see (conditional) jumps, additionally specify" msgstr "" #: instrview.cpp:431 msgid " --trace-jump=yes" msgstr "" #: instrview.cpp:629 msgid "There is an error trying to execute the command" msgstr "" #: instrview.cpp:634 instrview.cpp:900 msgid "Check that you have installed 'objdump'." msgstr "" #: instrview.cpp:636 instrview.cpp:902 msgid "This utility can be found in the 'binutils' package." msgstr "" #: instrview.cpp:739 msgid "(No Assembler)" msgstr "" #: instrview.cpp:875 #, c-format msgid "" "_n: There is %n cost line without assembler code.\n" "There are %n cost lines without assembler code." msgstr "" #: instrview.cpp:877 msgid "This happens because the code of" msgstr "" #: instrview.cpp:880 msgid "does not seem to match the profile data file." msgstr "" #: instrview.cpp:883 msgid "Are you using an old profile data file or is the above mentioned" msgstr "" #: instrview.cpp:885 msgid "ELF object from an updated installation/another machine?" msgstr "" #: instrview.cpp:893 msgid "There seems to be an error trying to execute the command" msgstr "" #: instrview.cpp:898 msgid "Check that the ELF object used in the command exists." msgstr "" #: callgraphview.cpp:306 #, c-format msgid "Call(s) from %1" msgstr "" #: callgraphview.cpp:307 #, c-format msgid "Call(s) to %1" msgstr "" #: callgraphview.cpp:308 msgid "(unknown call)" msgstr "" #: callgraphview.cpp:1425 msgid "" "Call Graph around active Function" "Depending on configuration, this view shows the call graph environment of " "the active function. Note: the shown cost is only " "the cost which is spent while the active function was actually running; i.e. " "the cost shown for main() - if it's visible - should be the same as the cost of " "the active function, as that's the part of inclusive cost of main() spent while " "the active function was running.
" "For cycles, blue call arrows indicate that this is an artificial call added " "for correct drawing which actually never happened.
" "If the graph is larger than the widget area, an overview panner is shown in " "one edge. There are similar visualization options to the Call Treemap; the " "selected function is highlighted." "
"
msgstr ""
#: callgraphview.cpp:1789
msgid ""
"Warning: a long lasting graph layouting is in progress.\n"
"Reduce node/edge limits for speedup.\n"
msgstr ""
#: callgraphview.cpp:1792
msgid ""
"Layouting stopped.\n"
msgstr ""
#: callgraphview.cpp:1794
msgid ""
"The call graph has %1 nodes and %2 edges.\n"
msgstr ""
#: callgraphview.cpp:1827
msgid "No item activated for which to draw the call graph."
msgstr ""
#: callgraphview.cpp:1838
msgid "No call graph can be drawn for the active item."
msgstr ""
#: callgraphview.cpp:1867
msgid ""
"No call graph is available because the following\n"
"command cannot be run:\n"
"'%1'\n"
msgstr ""
#: callgraphview.cpp:1870 callgraphview.cpp:2200
msgid "Please check that 'dot' is installed (package GraphViz)."
msgstr ""
#: callgraphview.cpp:2199
msgid ""
"Error running the graph layouting tool.\n"
msgstr ""
#: callgraphview.cpp:2207
msgid ""
"There is no call graph available for function\n"
"\t'%1'\n"
"because it has no cost of the selected event type."
msgstr ""
#: callgraphview.cpp:2428
msgid "Stop Layouting"
msgstr ""
#: callgraphview.cpp:2436
msgid "As PostScript"
msgstr ""
#: callgraphview.cpp:2437
msgid "As Image ..."
msgstr ""
#: callgraphview.cpp:2439
msgid "Export Graph"
msgstr ""
#: callgraphview.cpp:2444 callgraphview.cpp:2467
msgid "Unlimited"
msgstr ""
#: callgraphview.cpp:2447 callgraphview.cpp:2470
msgid "None"
msgstr ""
#: callgraphview.cpp:2448 callgraphview.cpp:2471
msgid "max. 2"
msgstr ""
#: callgraphview.cpp:2449 callgraphview.cpp:2472
msgid "max. 5"
msgstr ""
#: callgraphview.cpp:2450 callgraphview.cpp:2473
msgid "max. 10"
msgstr ""
#: callgraphview.cpp:2451 callgraphview.cpp:2474
msgid "max. 15"
msgstr ""
#: callgraphview.cpp:2461 callgraphview.cpp:2484
#, c-format
msgid "< %1"
msgstr ""
#: callgraphview.cpp:2490
msgid "No Minimum"
msgstr ""
#: callgraphview.cpp:2494
#, c-format
msgid "50 %"
msgstr ""
#: callgraphview.cpp:2495
#, c-format
msgid "20 %"
msgstr ""
#: callgraphview.cpp:2496
#, c-format
msgid "10 %"
msgstr ""
#: callgraphview.cpp:2497
#, c-format
msgid "5 %"
msgstr ""
#: callgraphview.cpp:2498
#, c-format
msgid "3 %"
msgstr ""
#: callgraphview.cpp:2499
#, c-format
msgid "2 %"
msgstr ""
#: callgraphview.cpp:2500
#, c-format
msgid "1.5 %"
msgstr ""
#: callgraphview.cpp:2501
#, c-format
msgid "1 %"
msgstr ""
#: callgraphview.cpp:2517
msgid "Same as Node"
msgstr ""
#: callgraphview.cpp:2518
#, c-format
msgid "50 % of Node"
msgstr ""
#: callgraphview.cpp:2519
#, c-format
msgid "20 % of Node"
msgstr ""
#: callgraphview.cpp:2520
#, c-format
msgid "10 % of Node"
msgstr ""
#: callgraphview.cpp:2530
msgid "Caller Depth"
msgstr ""
#: callgraphview.cpp:2531
msgid "Callee Depth"
msgstr ""
#: callgraphview.cpp:2532
msgid "Min. Node Cost"
msgstr ""
#: callgraphview.cpp:2533
msgid "Min. Call Cost"
msgstr ""
#: callgraphview.cpp:2535
msgid "Arrows for Skipped Calls"
msgstr ""
#: callgraphview.cpp:2537
msgid "Inner-cycle Calls"
msgstr ""
#: callgraphview.cpp:2539
msgid "Cluster Groups"
msgstr ""
#: callgraphview.cpp:2544
msgid "Compact"
msgstr ""
#: callgraphview.cpp:2545
msgid "Normal"
msgstr ""
#: callgraphview.cpp:2546
msgid "Tall"
msgstr ""
#: callgraphview.cpp:2551
msgid "Top to Down"
msgstr ""
#: callgraphview.cpp:2552
msgid "Left to Right"
msgstr ""
#: callgraphview.cpp:2553
msgid "Circular"
msgstr ""
#: callgraphview.cpp:2559
msgid "TopLeft"
msgstr ""
#: callgraphview.cpp:2560
msgid "TopRight"
msgstr ""
#: callgraphview.cpp:2561
msgid "BottomLeft"
msgstr ""
#: callgraphview.cpp:2562
msgid "BottomRight"
msgstr ""
#. i18n: file configdlgbase.ui line 246
#: callgraphview.cpp:2563 rc.cpp:42 rc.cpp:51 rc.cpp:54
#, no-c-format
msgid "Automatic"
msgstr ""
#: callgraphview.cpp:2570
msgid "Graph"
msgstr ""
#: callgraphview.cpp:2572
msgid "Birds-eye View"
msgstr ""
#: _translatorinfo.cpp:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr ""
#: _translatorinfo.cpp:3
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr ""
#: coverageitem.cpp:65 coverageitem.cpp:205 functionitem.cpp:72
#, c-format
msgid ""
"_n: (%n function skipped)\n"
"(%n functions skipped)"
msgstr ""
#: main.cpp:38
msgid "Run This widget shows information for the current selected function in different "
"tabs: "
""
"
For more information, see the "
"What's This? help of the corresponding tab widget
The annotated source list shows the source lines of the current selected " "function together with (self) cost spent while executing the code of this " "source line. If there was a call in a source line, lines with details on the " "call happening are inserted into the source: the cost spent inside of the call, " "the number of calls happening, and the call destination.
" "Select a inserted call information line to make the destination function " "current.
" msgstr "" #: sourceview.cpp:120 #, c-format msgid "Go to Line %1" msgstr "" #: sourceview.cpp:293 msgid "(No Source)" msgstr "" #: sourceview.cpp:512 msgid "There is no cost of current selected type associated" msgstr "" #: sourceview.cpp:514 msgid "with any source line of this function in file" msgstr "" #: sourceview.cpp:518 msgid "Thus, no annotated source can be shown." msgstr "" #: sourceview.cpp:553 msgid "Source ('%1')" msgstr "" #: sourceview.cpp:559 msgid "--- Inlined from '%1' ---" msgstr "" #: sourceview.cpp:560 msgid "--- Inlined from unknown source ---" msgstr "" #: sourceview.cpp:565 msgid "There is no source available for the following function:" msgstr "" #: sourceview.cpp:570 msgid "This is because no debug information is present." msgstr "" #: sourceview.cpp:572 msgid "Recompile source and redo the profile run." msgstr "" #: sourceview.cpp:575 msgid "The function is located in this ELF object:" msgstr "" #: sourceview.cpp:583 msgid "This is because its source file cannot be found:" msgstr "" #: sourceview.cpp:587 msgid "Add the folder of this file to the source folder list." msgstr "" #: sourceview.cpp:589 msgid "The list can be found in the configuration dialog." msgstr "" #: partlistitem.cpp:49 msgid " (Thread %1)" msgstr "" #: partlistitem.cpp:56 msgid "(none)" msgstr "" #: callitem.cpp:82 partlistitem.cpp:152 msgid "(active)" msgstr "" #: functionselection.cpp:176 #, c-format msgid "Go to %1" msgstr "" #: functionselection.cpp:203 msgid "Show All Items" msgstr "" #: functionselection.cpp:226 msgid "No Grouping" msgstr "" #: coverageview.cpp:48 coverageview.cpp:54 msgid "Distance" msgstr "" #. i18n: file dumpselectionbase.ui line 928 #: coverageview.cpp:49 partview.cpp:49 rc.cpp:270 rc.cpp:315 #, no-c-format msgid "Called" msgstr "" #: callview.cpp:48 coverageview.cpp:50 msgid "Caller" msgstr "" #: coverageview.cpp:55 msgid "Calling" msgstr "" #: callview.cpp:52 coverageview.cpp:56 msgid "Callee" msgstr "" #: coverageview.cpp:90 msgid "" "List of all Callers" "This list shows all functions calling the current selected one, either " "directly or with several functions in-between on the stack; the number of " "functions in-between plus one is called the Distance " "(e.g. for function A,B,C there exists a call from A to C when A calls B and B " "calls C, i.e. A => B => C. The distance here is 2).
" "Absolute cost shown is the cost spent in the selected function while a " "listed function is active; relative cost is the percentage of all cost spent in " "the selected function while the listed one is active. The cost graphic shows " "logarithmic percentage with a different color for each distance.
" "As there can be many calls from the same function, the distance column " "sometimes shows the range of distances for all calls happening; then, in " "parentheses, there is the medium distance, i.e. the distance where most of the " "call costs happened.
" "Selecting a function makes it the current selected one of this information " "panel. If there are two panels (Split mode), the function of the other panel is " "changed instead.
" msgstr "" #: coverageview.cpp:120 msgid "" "List of all Callees" "This list shows all functions called by the current selected one, either " "directly or with several function in-between on the stack; the number of " "function in-between plus one is called the Distance " "(e.g. for function A,B,C there exists a call from A to C when A calls B and B " "calls C, i.e. A => B => C. The distance here is 2).
" "Absolute cost shown is the cost spent in the listed function while the " "selected is active; relative cost is the percentage of all cost spent in the " "listed function while the selected one is active. The cost graphic always shows " "logarithmic percentage with a different color for each distance.
" "As there can be many calls to the same function, the distance column " "sometimes shows the range of distances for all calls happening; then, in " "parentheses, there is the medium distance, i.e. the distance where most of the " "call costs happened.
" "Selecting a function makes it the current selected one of this information " "panel. If there are two panels (Split mode), the function of the other panel is " "changed instead.
" msgstr "" #: configuration.cpp:63 msgid "Instruction Fetch" msgstr "" #: configuration.cpp:64 msgid "Data Read Access" msgstr "" #: configuration.cpp:65 msgid "Data Write Access" msgstr "" #: configuration.cpp:66 msgid "L1 Instr. Fetch Miss" msgstr "" #: configuration.cpp:67 msgid "L1 Data Read Miss" msgstr "" #: configuration.cpp:68 msgid "L1 Data Write Miss" msgstr "" #: configuration.cpp:69 msgid "L2 Instr. Fetch Miss" msgstr "" #: configuration.cpp:70 msgid "L2 Data Read Miss" msgstr "" #: configuration.cpp:71 msgid "L2 Data Write Miss" msgstr "" #: configuration.cpp:72 msgid "Samples" msgstr "" #: configuration.cpp:73 msgid "System Time" msgstr "" #: configuration.cpp:74 msgid "User Time" msgstr "" #: configuration.cpp:75 msgid "L1 Miss Sum" msgstr "" #: configuration.cpp:76 msgid "L2 Miss Sum" msgstr "" #: configuration.cpp:77 msgid "Cycle Estimation" msgstr "" #. i18n: file kcachegrindui.rc line 15 #: rc.cpp:9 #, no-c-format msgid "&Layout" msgstr "" #. i18n: file kcachegrindui.rc line 32 #: rc.cpp:12 #, no-c-format msgid "Sidebars" msgstr "" #. i18n: file kcachegrindui.rc line 54 #: rc.cpp:18 #, no-c-format msgid "State Toolbar" msgstr "" #. i18n: file configdlgbase.ui line 37 #: rc.cpp:24 #, no-c-format msgid "General" msgstr "" #. i18n: file configdlgbase.ui line 69 #: rc.cpp:27 #, no-c-format msgid "Truncated when more/longer than:" msgstr "" #. i18n: file configdlgbase.ui line 77 #: rc.cpp:30 #, no-c-format msgid "Precision of percentage values:" msgstr "" #. i18n: file configdlgbase.ui line 85 #: rc.cpp:33 #, no-c-format msgid "Symbols in tooltips and context menus" msgstr "" #. i18n: file configdlgbase.ui line 141 #: rc.cpp:36 #, no-c-format msgid "Maximum number of items in lists:" msgstr "" #. i18n: file configdlgbase.ui line 162 #: rc.cpp:39 #, no-c-format msgid "Cost Item Colors" msgstr "" #. i18n: file configdlgbase.ui line 254 #: rc.cpp:45 #, no-c-format msgid "Object:" msgstr "" #. i18n: file configdlgbase.ui line 262 #: rc.cpp:48 #, no-c-format msgid "Class:" msgstr "" #. i18n: file configdlgbase.ui line 310 #: rc.cpp:57 #, no-c-format msgid "File:" msgstr "" #. i18n: file configdlgbase.ui line 376 #: rc.cpp:60 #, no-c-format msgid "Annotations" msgstr "" #. i18n: file configdlgbase.ui line 395 #: rc.cpp:63 #, no-c-format msgid "Context lines in annotations:" msgstr "" #. i18n: file configdlgbase.ui line 423 #: rc.cpp:66 #, no-c-format msgid "Source Folders" msgstr "" #. i18n: file configdlgbase.ui line 454 #: rc.cpp:69 #, no-c-format msgid "Object / Related Source Base" msgstr "" #. i18n: file configdlgbase.ui line 483 #: rc.cpp:72 #, no-c-format msgid "Add..." msgstr "" #. i18n: file dumpselectionbase.ui line 32 #: rc.cpp:87 #, no-c-format msgid "Target" msgstr "" #. i18n: file dumpselectionbase.ui line 54 #: rc.cpp:90 #, no-c-format msgid "Time" msgstr "" #. i18n: file dumpselectionbase.ui line 65 #: rc.cpp:93 #, no-c-format msgid "Path" msgstr "" #. i18n: file dumpselectionbase.ui line 106 #: rc.cpp:99 #, no-c-format msgid "Target command:" msgstr "" #. i18n: file dumpselectionbase.ui line 119 #: rc.cpp:102 #, no-c-format msgid "Profiler options:" msgstr "" #. i18n: file dumpselectionbase.ui line 125 #: rc.cpp:105 #, no-c-format msgid "Option" msgstr "" #. i18n: file dumpselectionbase.ui line 136 #: rc.cpp:108 rc.cpp:219 #, no-c-format msgid "Value" msgstr "" #. i18n: file dumpselectionbase.ui line 147 #: rc.cpp:111 #, no-c-format msgid "Trace" msgstr "" #. i18n: file dumpselectionbase.ui line 160 #: rc.cpp:114 rc.cpp:237 #, no-c-format msgid "Jumps" msgstr "" #. i18n: file dumpselectionbase.ui line 174 #: rc.cpp:117 #, no-c-format msgid "Instructions" msgstr "" #. i18n: file dumpselectionbase.ui line 189 #: rc.cpp:120 rc.cpp:240 #, no-c-format msgid "Events" msgstr "" #. i18n: file dumpselectionbase.ui line 202 #: rc.cpp:123 #, no-c-format msgid "Full Cache" msgstr "" #. i18n: file dumpselectionbase.ui line 216 #: rc.cpp:126 #, no-c-format msgid "Custom" msgstr "" #. i18n: file dumpselectionbase.ui line 231 #: rc.cpp:129 #, no-c-format msgid "Collect" msgstr "" #. i18n: file dumpselectionbase.ui line 244 #: rc.cpp:132 #, no-c-format msgid "At Startup" msgstr "" #. i18n: file dumpselectionbase.ui line 258 #: rc.cpp:135 #, no-c-format msgid "While In" msgstr "" #. i18n: file dumpselectionbase.ui line 273 #: rc.cpp:138 #, no-c-format msgid "Skip" msgstr "" #. i18n: file dumpselectionbase.ui line 286 #: rc.cpp:141 #, no-c-format msgid "PLT" msgstr "" #. i18n: file dumpselectionbase.ui line 315 #: rc.cpp:147 #, no-c-format msgid "Dump Profile" msgstr "" #. i18n: file dumpselectionbase.ui line 328 #: rc.cpp:150 #, no-c-format msgid "Every BBs" msgstr "" #. i18n: file dumpselectionbase.ui line 342 #: rc.cpp:153 rc.cpp:162 #, no-c-format msgid "On Entering" msgstr "" #. i18n: file dumpselectionbase.ui line 356 #: rc.cpp:156 #, no-c-format msgid "On Leaving" msgstr "" #. i18n: file dumpselectionbase.ui line 371 #: rc.cpp:159 #, no-c-format msgid "Zero Events" msgstr "" #. i18n: file dumpselectionbase.ui line 399 #: rc.cpp:165 #, no-c-format msgid "Separate" msgstr "" #. i18n: file dumpselectionbase.ui line 412 #: rc.cpp:168 #, no-c-format msgid "Threads" msgstr "" #. i18n: file dumpselectionbase.ui line 426 #: rc.cpp:171 #, no-c-format msgid "Recursions" msgstr "" #. i18n: file dumpselectionbase.ui line 440 #: rc.cpp:174 #, no-c-format msgid "Call Chain" msgstr "" #. i18n: file dumpselectionbase.ui line 470 #: rc.cpp:177 #, no-c-format msgid "Custom profiler options:" msgstr "" #. i18n: file dumpselectionbase.ui line 508 #: rc.cpp:180 #, no-c-format msgid "Run New Profile" msgstr "" #. i18n: file dumpselectionbase.ui line 520 #: rc.cpp:183 #, no-c-format msgid "Info" msgstr "" #. i18n: file dumpselectionbase.ui line 531 #: rc.cpp:186 #, no-c-format msgid "Dump reason:" msgstr "" #. i18n: file dumpselectionbase.ui line 544 #: rc.cpp:189 #, no-c-format msgid "Event summary:" msgstr "" #. i18n: file dumpselectionbase.ui line 561 #: rc.cpp:195 #, no-c-format msgid "Sum" msgstr "" #. i18n: file dumpselectionbase.ui line 579 #: rc.cpp:198 #, no-c-format msgid "Miscellaneous:" msgstr "" #. i18n: file dumpselectionbase.ui line 617 #: rc.cpp:201 #, no-c-format msgid "Show" msgstr "" #. i18n: file dumpselectionbase.ui line 625 #: rc.cpp:204 #, no-c-format msgid "Compare" msgstr "" #. i18n: file dumpselectionbase.ui line 637 #: rc.cpp:207 #, no-c-format msgid "State" msgstr "" #. i18n: file dumpselectionbase.ui line 656 #: rc.cpp:210 #, no-c-format msgid "Update" msgstr "" #. i18n: file dumpselectionbase.ui line 664 #: rc.cpp:213 #, no-c-format msgid "Every [s]:" msgstr "" #. i18n: file dumpselectionbase.ui line 677 #: rc.cpp:216 #, no-c-format msgid "Counter" msgstr "" #. i18n: file dumpselectionbase.ui line 699 #: rc.cpp:222 #, no-c-format msgid "Dumps Done" msgstr "" #. i18n: file dumpselectionbase.ui line 713 #: rc.cpp:225 #, no-c-format msgid "Is Collecting" msgstr "" #. i18n: file dumpselectionbase.ui line 727 #: rc.cpp:228 #, no-c-format msgid "Executed" msgstr "" #. i18n: file dumpselectionbase.ui line 740 #: rc.cpp:231 #, no-c-format msgid "Basic Blocks" msgstr "" #. i18n: file dumpselectionbase.ui line 754 #: callmapview.cpp:63 rc.cpp:234 rc.cpp:339 #, no-c-format msgid "Calls" msgstr "" #. i18n: file dumpselectionbase.ui line 796 #: rc.cpp:243 #, no-c-format msgid "Ir" msgstr "" #. i18n: file dumpselectionbase.ui line 811 #: rc.cpp:246 #, no-c-format msgid "Distinct" msgstr "" #. i18n: file dumpselectionbase.ui line 824 #: configdlg.cpp:58 rc.cpp:249 #, no-c-format msgid "ELF Objects" msgstr "" #. i18n: file dumpselectionbase.ui line 838 #: rc.cpp:252 #, no-c-format msgid "Functions" msgstr "" #. i18n: file dumpselectionbase.ui line 852 #: rc.cpp:255 #, no-c-format msgid "Contexts" msgstr "" #. i18n: file dumpselectionbase.ui line 890 #: rc.cpp:258 #, no-c-format msgid "Stack trace:" msgstr "" #. i18n: file dumpselectionbase.ui line 898 #: rc.cpp:261 #, no-c-format msgid "Sync." msgstr "" #. i18n: file dumpselectionbase.ui line 950 #: callmapview.cpp:61 rc.cpp:276 rc.cpp:321 #, no-c-format msgid "Location" msgstr "" #. i18n: file dumpselectionbase.ui line 976 #: rc.cpp:279 #, no-c-format msgid "Start" msgstr "" #. i18n: file dumpselectionbase.ui line 1001 #: rc.cpp:282 #, no-c-format msgid "Zero" msgstr "" #. i18n: file dumpselectionbase.ui line 1009 #: rc.cpp:285 #, no-c-format msgid "Dump" msgstr "" #. i18n: file dumpselectionbase.ui line 1021 #: rc.cpp:288 #, no-c-format msgid "Messages" msgstr "" #. i18n: file dumpselectionbase.ui line 1045 #: rc.cpp:291 #, no-c-format msgid "Kill Run" msgstr "" #. i18n: file functionselectionbase.ui line 41 #: rc.cpp:300 #, no-c-format msgid "&Search:" msgstr "" #. i18n: file functionselectionbase.ui line 73 #: rc.cpp:306 #, no-c-format msgid "Group" msgstr "" #. i18n: file partselectionbase.ui line 60 #: rc.cpp:327 #, no-c-format msgid "(no trace parts)" msgstr "" #. i18n: file stackselectionbase.ui line 16 #: rc.cpp:330 #, no-c-format msgid "Stack Selection" msgstr "" #. i18n: file stackselectionbase.ui line 42 #: rc.cpp:336 #, no-c-format msgid "Cost2" msgstr "" #: treemap.cpp:1281 #, c-format msgid "Text %1" msgstr "" #: treemap.cpp:2809 msgid "Recursive Bisection" msgstr "" #: treemap.cpp:2810 msgid "Columns" msgstr "" #: treemap.cpp:2811 msgid "Rows" msgstr "" #: treemap.cpp:2812 msgid "Always Best" msgstr "" #: treemap.cpp:2813 msgid "Best" msgstr "" #: treemap.cpp:2814 msgid "Alternate (V)" msgstr "" #: treemap.cpp:2815 msgid "Alternate (H)" msgstr "" #: treemap.cpp:2872 msgid "Nesting" msgstr "" #: treemap.cpp:2875 msgid "Correct Borders Only" msgstr "" #: treemap.cpp:2877 treemap.cpp:2878 treemap.cpp:2879 treemap.cpp:2880 #, c-format msgid "Width %1" msgstr "" #: callmapview.cpp:321 treemap.cpp:2889 msgid "Shading" msgstr "" #: treemap.cpp:2902 msgid "Visible" msgstr "" #: treemap.cpp:2903 msgid "Take Space From Children" msgstr "" #: treemap.cpp:2905 msgid "Top Left" msgstr "" #: treemap.cpp:2906 msgid "Top Center" msgstr "" #: treemap.cpp:2907 msgid "Top Right" msgstr "" #: treemap.cpp:2909 msgid "Bottom Center" msgstr "" #: treemap.cpp:2910 msgid "Bottom Right" msgstr "" #: treemap.cpp:2987 msgid "No %1 Limit" msgstr "" #: callmapview.cpp:243 treemap.cpp:3039 msgid "No Area Limit" msgstr "" #: callmapview.cpp:258 treemap.cpp:3045 msgid "Area of '%1' (%2)" msgstr "" #: treemap.cpp:3056 treemap.cpp:3067 #, c-format msgid "" "_n: 1 Pixel\n" "%n Pixels" msgstr "" #: callmapview.cpp:264 treemap.cpp:3071 msgid "Double Area Limit (to %1)" msgstr "" #: treemap.cpp:3073 msgid "Halve Area Limit (to %1)" msgstr "" #: callmapview.cpp:187 treemap.cpp:3101 msgid "No Depth Limit" msgstr "" #: callmapview.cpp:198 treemap.cpp:3107 msgid "Depth of '%1' (%2)" msgstr "" #: treemap.cpp:3118 #, c-format msgid "Depth %1" msgstr "" #: treemap.cpp:3122 msgid "Decrement (to %1)" msgstr "" #: treemap.cpp:3124 msgid "Increment (to %1)" msgstr "" #: callmapview.cpp:98 msgid "" "Caller Map" "This graph shows the nested hierarchy of all callers of the current " "activated function. Each colored rectangle represents a function; its size " "tries to be proportional to the cost spent therein while the active function is " "running (however, there are drawing constrains).
" msgstr "" #: callmapview.cpp:105 msgid "" "Call Map" "This graph shows the nested hierarchy of all callees of the current " "activated function. Each colored rectangle represents a function; its size " "tries to be proportional to the cost spent therein while the active function is " "running (however, there are drawing constrains).
" msgstr "" #: callmapview.cpp:113 msgid "" "Appearance options can be found in the in the context menu. To get exact " "size proportions, choose 'Hide incorrect borders'. As this mode can be " "very time consuming, you may want to limit the maximum drawn nesting level " "before. 'Best' determinates the split direction for children from the aspect " "ratio of the parent. 'Always Best' decides on remaining space for each sibling. " "'Ignore Proportions' takes space for function name drawing before " "drawing children. Note that size proportions can get heavily wrong.
" "This is a TreeMap widget. Keyboard navigation is available with the " "left/right arrow keys for traversing siblings, and up/down arrow keys to go a " "nesting level up/down. Return activates the current item.
" msgstr "" #: callmapview.cpp:167 msgid "Go To" msgstr "" #: callmapview.cpp:184 msgid "Stop at Depth" msgstr "" #: callmapview.cpp:190 msgid "Depth 10" msgstr "" #: callmapview.cpp:192 msgid "Depth 15" msgstr "" #: callmapview.cpp:194 msgid "Depth 20" msgstr "" #: callmapview.cpp:204 msgid "Decrement Depth (to %1)" msgstr "" #: callmapview.cpp:205 msgid "Increment Depth (to %1)" msgstr "" #: callmapview.cpp:209 msgid "Stop at Function" msgstr "" #: callmapview.cpp:210 msgid "No Function Limit" msgstr "" #: callmapview.cpp:240 msgid "Stop at Area" msgstr "" #: callmapview.cpp:246 msgid "50 Pixels" msgstr "" #: callmapview.cpp:248 msgid "100 Pixels" msgstr "" #: callmapview.cpp:250 msgid "200 Pixels" msgstr "" #: callmapview.cpp:252 msgid "500 Pixels" msgstr "" #: callmapview.cpp:266 msgid "Half Area Limit (to %1)" msgstr "" #: callmapview.cpp:273 msgid "Visualisation" msgstr "" #: callmapview.cpp:277 msgid "Split Direction" msgstr "" #: callmapview.cpp:279 msgid "Skip Incorrect Borders" msgstr "" #: callmapview.cpp:284 msgid "Border Width" msgstr "" #: callmapview.cpp:285 msgid "Border 0" msgstr "" #: callmapview.cpp:288 msgid "Border 1" msgstr "" #: callmapview.cpp:290 msgid "Border 2" msgstr "" #: callmapview.cpp:292 msgid "Border 3" msgstr "" #: callmapview.cpp:297 msgid "Draw Symbol Names" msgstr "" #: callmapview.cpp:298 msgid "Draw Cost" msgstr "" #: callmapview.cpp:299 msgid "Draw Location" msgstr "" #: callmapview.cpp:300 msgid "Draw Calls" msgstr "" #: callmapview.cpp:431 msgid "Call Map: Current is '%1'" msgstr "" #: callmapview.cpp:599 msgid "(no function)" msgstr "" #: callmapview.cpp:741 callmapview.cpp:858 msgid "(no call)" msgstr "" #: cachegrindloader.cpp:141 msgid "Import filter for Cachegrind/Callgrind generated profile data files" msgstr "" #: cachegrindloader.cpp:738 #, c-format msgid "Loading %1" msgstr "" #: callview.cpp:47 callview.cpp:51 msgid "Count" msgstr "" #: callview.cpp:85 msgid "" "List of direct Callers" "This list shows all functions calling the current selected one directly, " "together with a call count and the cost spent in the current selected function " "while being called from the function from the list.
" "An icon instead of an inclusive cost specifies that this is a call inside of " "a recursive cycle. An inclusive cost makes no sense here.
" "Selecting a function makes it the current selected one of this information " "panel. If there are two panels (Split mode), the function of the other panel is " "changed instead.
" msgstr "" #: callview.cpp:98 msgid "" "List of direct Callees" "This list shows all functions called by the current selected one directly, " "together with a call count and the cost spent in this function while being " "called from the selected function.
" "Selecting a function makes it the current selected one of this information " "panel. If there are two panels (Split mode), the function of the other panel is " "changed instead.
" msgstr "" #: costtypeitem.cpp:56 msgid "Unknown Type" msgstr "" #: tips.cpp:3 msgid "" "...that the What's This? help for every GUI widget\n" "in KCachegrind contains detailed usage information for this widget?\n" "It is highly recommended to read at least these help texts on first\n" "use. Request What's This? help by pressing\n" "Shift+F1 and clicking on the widget.
\n" msgstr "" #: tips.cpp:12 msgid "" "...that you can get profile information at instruction level\n" "with Calltree when you provide the option --dump-instr=yes?\n" "Use the Assembler View for the instruction annotations.\n" "
\n" msgstr "" #: tips.cpp:20 msgid "" "...that you can use Alt-Left/Right keys of your keyboard to go\n" "back/forward in the active object history ?
\n" msgstr "" #: tips.cpp:26 msgid "" "...that you can navigate in the Callee/Caller Map View using\n" "arrow keys? Use Left/Right to change to siblings of the current\n" "item; use Up/Down to go one nesting level up/down. To select\n" "the current item, press Space, and to activate it, press Return.\n" "
\n" msgstr "" #: tips.cpp:35 msgid "" "...that you can navigate in the Call Graph View using\n" "arrow keys? Use Up/Down to go one calling level up/down, alternating\n" "between calls and functions. Use Left/Right to change to siblings of a current\n" "selected call. To activate the current item, press Return.\n" "
\n" msgstr "" #: tips.cpp:44 msgid "" "...that you can rapidly locate a function by entering part of its\n" "name (case-insensitive) into the edit line of the toolbar\n" "and hit return?
\n" msgstr "" #: tips.cpp:51 msgid "" "...that you can assign custom colors to \n" "ELF objects/C++ Classes/Source Files for graph coloring\n" "in Settings->Configure KCachegrind...?
\n" msgstr "" #: tips.cpp:58 msgid "" "...that you can see if debug info is available for a selected \n" "function by looking at the location label in the Info tab or\n" "the source listing header in the source tab?
\n" "There must be the name of the source file (with extension).\n" "If KCachegrind still doesn't show the source, make sure that you\n" "have added the directory of the source file to the\n" "Source Directories list in the configuration.\n" msgstr "" #: tips.cpp:69 msgid "" "
...that you can configure whether KCachgrind should\n" "show absolute event counts or relative ones (percentage display)?
\n" msgstr "" #: tips.cpp:75 msgid "" "...that you can configure the maximum number of items\n" "for all function lists in KCachegrind? Limiting the number\n" "of items is done to get a fast reacting GUI. The last item in\n" "the list will show you the number of skipped functions, together\n" "with a cost condition for these skipped functions.
\n" "To activate a function with small costs, search for it and select\n" "it in the flat profile. Selecting functions with small cost will\n" "temporarily add them to the flat profile list.
\n" msgstr "" #: tips.cpp:87 msgid "" "...that the Coverage tab - in contrast to the Call Lists tab -\n" "shows all functions that are calling the selected function\n" "(upper part) / are called by the selected function (bottom part),\n" "no matter how many function are between them on the stack?
\n" "Examples:
\n" "An entry in the upper list for function foo1() with a value of 50%\n" "with function bar() selected means that 50% of all the cost of function\n" "bar() happened while called from function foo1().
\n" "An entry in the bottom list for function foo2() with a value of 50%\n" "with function bar() selected means that 50% of all the cost of function\n" "bar() happened while calling foo2() from bar().
\n" msgstr "" #: tips.cpp:102 msgid "" "...that waiting for the tool tip inside of a tree map\n" "shows the list of names of the nested rectangles the mouse\n" "pointer is over?
\n" "Items from this list can be selected by pressing the right\n" "mouse button.
\n" msgstr "" #: tips.cpp:111 msgid "" "...that you can constrain the cost counts shown to only a\n" "few parts of the whole trace by selecting these parts in the\n" "\"Trace Selection\" Dockable?
\n" "To generate multiple parts in a profiling run with\n" "cachegrind, use e.g. option --cachedumps=xxx for parts\n" "of a length of xxx basic blocks (A basic block is a run\n" "of not-branching assembler statements inside of your program\n" "code).
\n" msgstr "" #: configdlg.cpp:60 msgid "Source Files" msgstr "" #: configdlg.cpp:61 msgid "C++ Classes" msgstr "" #: configdlg.cpp:62 msgid "Function (no Grouping)" msgstr "" #: configdlg.cpp:157 configdlg.cpp:350 configdlg.cpp:371 msgid "(always)" msgstr "" #: configdlg.cpp:210 msgid "KCachegrind Configuration" msgstr "" #: configdlg.cpp:211 msgid "" "The Maximum Number of List Items should be below 500.The previous set value " "(%1) will still be used." msgstr "" #: configdlg.cpp:384 msgid "Choose Source Folder" msgstr "" #: partgraph.cpp:167 #, c-format msgid "Profile Part %1" msgstr "" #: partgraph.cpp:226 msgid "(no trace)" msgstr "" #: partgraph.cpp:229 msgid "(no part)" msgstr "" #: partview.cpp:51 msgid "Comment" msgstr "" #: partview.cpp:73 msgid "" "Trace Part List" "This list shows all trace parts of the loaded trace. For each part, the " "self/inclusive cost of the current selected function, spent in the part, is " "shown; percentage costs are always relative to the total cost " "of the part (not to the whole trace as in the Trace Part Overview). Also " "shown are the calls happening to/from the current function inside of the trace " "part.
" "By choosing one or more trace parts from the list, the costs shown all over " "KCachegrind will only be the ones spent in the selected part(s). If no list " "selection is shown, in fact all trace parts are selected implicitly.
" "This is a multi-selection list. You can select ranges by dragging the mouse " "or use SHIFT/CTRL modifiers. Selection/Deselection of trace parts can also be " "done by using the Trace Part Overview Dockable. This one also supports multiple " "selection.
" "Note that the list is hidden if only one trace part is loaded.
" msgstr "" #: partview.cpp:106 msgid "Select '%1'" msgstr "" #: partview.cpp:107 msgid "Hide '%1'" msgstr "" #: partview.cpp:111 msgid "Hide Selected" msgstr "" #: partview.cpp:112 msgid "Show All" msgstr ""