# Danish translation of tdecachegrind # Copyright (C). # # Erik Kjær Pedersen , 2004, 2005. # Rune Rønde Laursen , 2004, 2005. msgid "" msgstr "" "Project-Id-Version: tdecachegrind\n" "POT-Creation-Date: 2021-07-07 18:23+0000\n" "PO-Revision-Date: 2005-12-29 08:33-0500\n" "Last-Translator: Erik Kjær Pedersen \n" "Language-Team: Danish \n" "Language: da\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11\n" "Plural-Forms: \n" #. Instead of a literal translation, add your name to the end of the list (separated by a comma). msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "Erik Kjær Pedersen" #. Instead of a literal translation, add your email to the end of the list (separated by a comma). msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "erik@binghamton.edu" #: cachegrindloader.cpp:141 msgid "Import filter for Cachegrind/Callgrind generated profile data files" msgstr "Importfilter for Cachegrind/Callgrind-genererede profildata-filer" #: cachegrindloader.cpp:738 #, c-format msgid "Loading %1" msgstr "Indlæser %1" #: callgraphview.cpp:306 #, c-format msgid "Call(s) from %1" msgstr "Kald fra %1" #: callgraphview.cpp:307 #, c-format msgid "Call(s) to %1" msgstr "Kald til %1" #: callgraphview.cpp:308 msgid "(unknown call)" msgstr "(ukendt kald)" #: callgraphview.cpp:1425 msgid "" "Call Graph around active Function

Depending on configuration, this " "view shows the call graph environment of the active function. Note: the " "shown cost is only the cost which is spent while the active function " "was actually running; i.e. the cost shown for main() - if it's visible - " "should be the same as the cost of the active function, as that's the part of " "inclusive cost of main() spent while the active function was running.

For cycles, blue call arrows indicate that this is an artificial call " "added for correct drawing which actually never happened.

If the graph " "is larger than the widget area, an overview panner is shown in one edge. " "There are similar visualization options to the Call Treemap; the selected " "function is highlighted.

" msgstr "" "Kaldegraf omkring aktiv funktion

Afhængig af indstillingen, viser " "dette kaldegrafens omgivelser af den aktive funktion. Bemærk: den viste " "omkostning er kun den omkostning som er brugt mens den aktive " "funktion rent faktisk kørte; dvs. den omkostning der vises for main() - hvis " "den er synlig - skal være den samme som omkostningen for den aktive " "funktion, da det er delen af den inklusive omkostning af main() brugt mens " "den aktive funktion kørte.

For cykler, indikerer blå kaldepile at " "dette er et kunstigt kald tilføjet den rigtige tegning som rent faktisk " "aldrig skete.

Hvis grafen er større end kontrolområdet, vises en " "overblikstingest på en kant. Der er lignende visualiseringstilvalg til Kald-" "trækortet; den valgte funktion er fremhævet.

" #: callgraphview.cpp:1789 msgid "" "Warning: a long lasting graph layouting is in progress.\n" "Reduce node/edge limits for speedup.\n" msgstr "" "Advarsel: længerevarende grafudlægning under udførelse.\n" "Reducér knude/rand-grænser for at øge hastigheden.\n" #: callgraphview.cpp:1792 msgid "Layouting stopped.\n" msgstr "Grafudlægning stoppet.\n" #: callgraphview.cpp:1794 msgid "The call graph has %1 nodes and %2 edges.\n" msgstr "Kaldgrafen har %1 knuder og %2 rande.\n" #: callgraphview.cpp:1827 msgid "No item activated for which to draw the call graph." msgstr "Intet punkt aktiveret at tegne kaldgrafen ud fra." #: callgraphview.cpp:1838 msgid "No call graph can be drawn for the active item." msgstr "Der kan ikke tegnes nogen kaldgraf for det valgte punkt." #: callgraphview.cpp:1867 msgid "" "No call graph is available because the following\n" "command cannot be run:\n" "'%1'\n" msgstr "" "Der er ingen kaldgraf til rådighed pga. at følgende\n" "kommando ikke kan køres:\n" "'%1'\n" #: callgraphview.cpp:1870 callgraphview.cpp:2199 msgid "Please check that 'dot' is installed (package GraphViz)." msgstr "Tjek at 'dot' er installeret (pakken GraphViz)." #: callgraphview.cpp:2198 msgid "Error running the graph layouting tool.\n" msgstr "Fejl ved kørsel af grafudlægnings-værktøjet.\n" #: callgraphview.cpp:2206 msgid "" "There is no call graph available for function\n" "\t'%1'\n" "because it has no cost of the selected event type." msgstr "" "Der er ingen kaldegraf tilgængelig for funktionen\n" "\t'%1'\n" "da den ikke har nogen omkostning for den valgte begivenhedstype." #: callgraphview.cpp:2396 callgraphview.cpp:2400 callgraphview.cpp:2418 #: callview.cpp:123 callview.cpp:128 coverageview.cpp:166 instrview.cpp:191 #: sourceview.cpp:116 msgid "Go to '%1'" msgstr "Gå til '%1'" #: callgraphview.cpp:2427 msgid "Stop Layouting" msgstr "Stop udlægning" #: callgraphview.cpp:2435 msgid "As PostScript" msgstr "Som Postscript" #: callgraphview.cpp:2436 msgid "As Image ..." msgstr "Som billede ..." #: callgraphview.cpp:2438 msgid "Export Graph" msgstr "Eksportér graf" #: callgraphview.cpp:2443 callgraphview.cpp:2466 msgid "Unlimited" msgstr "Ubegrænset" #: callgraphview.cpp:2446 callgraphview.cpp:2469 msgid "None" msgstr "Ingen" #: callgraphview.cpp:2447 callgraphview.cpp:2470 msgid "max. 2" msgstr "maks. 2" #: callgraphview.cpp:2448 callgraphview.cpp:2471 msgid "max. 5" msgstr "maks. 5" #: callgraphview.cpp:2449 callgraphview.cpp:2472 msgid "max. 10" msgstr "maks. 10" #: callgraphview.cpp:2450 callgraphview.cpp:2473 msgid "max. 15" msgstr "maks. 15" #: callgraphview.cpp:2460 callgraphview.cpp:2483 #, c-format msgid "< %1" msgstr "< %1" #: callgraphview.cpp:2489 msgid "No Minimum" msgstr "Intet minimum" #: callgraphview.cpp:2493 #, c-format msgid "50 %" msgstr "50 %" #: callgraphview.cpp:2494 #, c-format msgid "20 %" msgstr "20 %" #: callgraphview.cpp:2495 #, c-format msgid "10 %" msgstr "10 %" #: callgraphview.cpp:2496 #, c-format msgid "5 %" msgstr "5 %" #: callgraphview.cpp:2497 #, c-format msgid "3 %" msgstr "3 %" #: callgraphview.cpp:2498 #, c-format msgid "2 %" msgstr "2 %" #: callgraphview.cpp:2499 #, c-format msgid "1.5 %" msgstr "1,5 %" #: callgraphview.cpp:2500 #, c-format msgid "1 %" msgstr "1 %" #: callgraphview.cpp:2516 msgid "Same as Node" msgstr "Samme som knuden" #: callgraphview.cpp:2517 #, c-format msgid "50 % of Node" msgstr "50 % af knuden" #: callgraphview.cpp:2518 #, c-format msgid "20 % of Node" msgstr "20 % af knuden" #: callgraphview.cpp:2519 #, c-format msgid "10 % of Node" msgstr "10 % af knuden" #: callgraphview.cpp:2529 msgid "Caller Depth" msgstr "Kalder-dybde" #: callgraphview.cpp:2530 msgid "Callee Depth" msgstr "Kaldt-dybde" #: callgraphview.cpp:2531 msgid "Min. Node Cost" msgstr "Min. knudeomkostning" #: callgraphview.cpp:2532 msgid "Min. Call Cost" msgstr "Min. kaldeomkostning" #: callgraphview.cpp:2534 msgid "Arrows for Skipped Calls" msgstr "Tillader oversprungen kald" #: callgraphview.cpp:2536 msgid "Inner-cycle Calls" msgstr "Indre-cykel kald" #: callgraphview.cpp:2538 msgid "Cluster Groups" msgstr "Klyngegrupper" #: callgraphview.cpp:2543 msgid "Compact" msgstr "Kompakt" #: callgraphview.cpp:2544 msgid "Normal" msgstr "Normal" #: callgraphview.cpp:2545 msgid "Tall" msgstr "Høj" #: callgraphview.cpp:2550 msgid "Top to Down" msgstr "Ovenfra nedad" #: callgraphview.cpp:2551 msgid "Left to Right" msgstr "Venstre mod højre" #: callgraphview.cpp:2552 msgid "Circular" msgstr "Cirkulær" #: callgraphview.cpp:2558 msgid "TopLeft" msgstr "TopVenstre" #: callgraphview.cpp:2559 msgid "TopRight" msgstr "TopHøjre" #: callgraphview.cpp:2560 msgid "BottomLeft" msgstr "NedeVenstre" #: callgraphview.cpp:2561 msgid "BottomRight" msgstr "NedeHøjre" #: callgraphview.cpp:2562 configdlgbase.ui:246 configdlgbase.ui:286 #: configdlgbase.ui:302 #, no-c-format msgid "Automatic" msgstr "Automatisk" #: callgraphview.cpp:2569 msgid "Graph" msgstr "Graf" #: callgraphview.cpp:2570 partselection.cpp:320 msgid "Visualization" msgstr "Visualisering" #: callgraphview.cpp:2571 msgid "Birds-eye View" msgstr "Fugleperspektiv" #: callitem.cpp:82 partlistitem.cpp:152 msgid "(active)" msgstr "(aktiv)" #: callmapview.cpp:59 dumpselectionbase.ui:550 partselection.cpp:58 #, no-c-format msgid "Name" msgstr "Navn" #: callmapview.cpp:60 callview.cpp:44 instrview.cpp:126 partselection.cpp:59 #: sourceview.cpp:51 stackselectionbase.ui:31 #, no-c-format msgid "Cost" msgstr "Omkostning" #: callmapview.cpp:61 dumpselectionbase.ui:950 functionselectionbase.ui:147 #, no-c-format msgid "Location" msgstr "Sted" #: callmapview.cpp:63 dumpselectionbase.ui:754 stackselectionbase.ui:53 #, no-c-format msgid "Calls" msgstr "Kald" #: callmapview.cpp:98 msgid "" "Caller Map

This graph shows the nested hierarchy of all callers of " "the current activated function. Each colored rectangle represents a " "function; its size tries to be proportional to the cost spent therein while " "the active function is running (however, there are drawing constrains).

" msgstr "" "Kalderafbildning

Denne graf viser det indlejrede hierarki af alle " "kaldere af den aktiverede funktion. Hver farvet rektangel repræsenterer en " "funktion; dets størrelse forsøger at være proportional med den omkostning " "der er brugt deri men den aktive funktion kører (der er imidlertid " "tegningsbegrænsninger).

" #: callmapview.cpp:105 msgid "" "Call Map

This graph shows the nested hierarchy of all callees of " "the current activated function. Each colored rectangle represents a " "function; its size tries to be proportional to the cost spent therein while " "the active function is running (however, there are drawing constrains).

" msgstr "" "Kalderafbildning

Denne graf viser det indlejrede hierarki af alle " "kaldere af den aktiverede funktion. Hver farvet rektangel repræsenterer en " "funktion; dets størrelse forsøger at være proportional med den omkostning " "der er brugt deri men den aktive funktion kører (der er imidlertid " "tegningsbegrænsninger).

" #: callmapview.cpp:113 msgid "" "

Appearance options can be found in the in the context menu. To get exact " "size proportions, choose 'Hide incorrect borders'. As this mode can be " "very time consuming, you may want to limit the maximum drawn " "nesting level before. 'Best' determinates the split direction for children " "from the aspect ratio of the parent. 'Always Best' decides on remaining " "space for each sibling. 'Ignore Proportions' takes space for function name " "drawing before drawing children. Note that size proportions can get " "heavily wrong.

This is a TreeMap widget. Keyboard " "navigation is available with the left/right arrow keys for traversing " "siblings, and up/down arrow keys to go a nesting level up/down. Return activates the current item.

" msgstr "" "

Valgmuligheder for udseendet findes i sammenhængsmenuen. For at få " "nøjagtige størrelsesproportioner vælges 'Skjul forkerte kanter'. Da denne " "tilstand kan have meget stort tidsforbrug, vil du muligvis begrænse " "den maksimalt tegnede indlejring først. 'Bedste' afgør opdelingsretningen " "for afledte ud fra den given aspekt-ratio. 'Altid bedst' beslutter sig for " "resten af pladsen hvad sideordnede angår. 'Ignorér proportioner' tager plads " "til tegning af funktionsnavne før hver afledt tegnes. Bemærk at " "størrelsesproportioner kan blive meget forkerte.

Dette er en " "Trækort kontrol. Tastaturnavigation er mulig med venstre/højre " "piletaster for at gå sidelæns, og op/ned piletaster for at gå en " "indlejringsniveau op/ned. Return aktiverer dette punkt.

" #: callmapview.cpp:167 msgid "Go To" msgstr "Gå til" #: callmapview.cpp:184 msgid "Stop at Depth" msgstr "Stop ved dybde" #: callmapview.cpp:187 treemap.cpp:3101 msgid "No Depth Limit" msgstr "Ingen dybdegrænse" #: callmapview.cpp:190 msgid "Depth 10" msgstr "Dybde 10" #: callmapview.cpp:192 msgid "Depth 15" msgstr "Dybde 15" #: callmapview.cpp:194 msgid "Depth 20" msgstr "Dybde 20" #: callmapview.cpp:198 treemap.cpp:3107 msgid "Depth of '%1' (%2)" msgstr "Dybde på '%1' (%2)" #: callmapview.cpp:204 msgid "Decrement Depth (to %1)" msgstr "Sæt dybde ned (til %1)" #: callmapview.cpp:205 msgid "Increment Depth (to %1)" msgstr "Sæt dybde up (til %1)" #: callmapview.cpp:209 msgid "Stop at Function" msgstr "Stop ved funktion" #: callmapview.cpp:210 msgid "No Function Limit" msgstr "Ingen funktionsgrænse" #: callmapview.cpp:240 msgid "Stop at Area" msgstr "Stop ved område" #: callmapview.cpp:243 treemap.cpp:3039 msgid "No Area Limit" msgstr "Ingen område-grænse" #: callmapview.cpp:246 msgid "50 Pixels" msgstr "50 Pixel" #: callmapview.cpp:248 msgid "100 Pixels" msgstr "100 Pixel" #: callmapview.cpp:250 msgid "200 Pixels" msgstr "200 Pixel" #: callmapview.cpp:252 msgid "500 Pixels" msgstr "500 Pixel" #: callmapview.cpp:258 treemap.cpp:3045 msgid "Area of '%1' (%2)" msgstr "Område for '%1' (%2)" #: callmapview.cpp:264 treemap.cpp:3071 msgid "Double Area Limit (to %1)" msgstr "Fordobl områdegrænse (til %1)" #: callmapview.cpp:266 msgid "Half Area Limit (to %1)" msgstr "Halvér områdegrænse (til %1)" #: callmapview.cpp:273 msgid "Visualisation" msgstr "Visualisering" #: callmapview.cpp:277 msgid "Split Direction" msgstr "Opdelt retning" #: callmapview.cpp:279 msgid "Skip Incorrect Borders" msgstr "Overspring forkerte grænser" #: callmapview.cpp:284 msgid "Border Width" msgstr "Kantbredde" #: callmapview.cpp:285 msgid "Border 0" msgstr "Kant 0" #: callmapview.cpp:288 msgid "Border 1" msgstr "Kant 1" #: callmapview.cpp:290 msgid "Border 2" msgstr "Kant 2" #: callmapview.cpp:292 msgid "Border 3" msgstr "Kant 3" #: callmapview.cpp:297 msgid "Draw Symbol Names" msgstr "Tegn symbolnavne" #: callmapview.cpp:298 msgid "Draw Cost" msgstr "Tegn omkostning" #: callmapview.cpp:299 msgid "Draw Location" msgstr "Tegn sted" #: callmapview.cpp:300 msgid "Draw Calls" msgstr "Tegn kald" #: callmapview.cpp:303 partselection.cpp:342 msgid "Ignore Proportions" msgstr "Ignorér proportioner" #: callmapview.cpp:304 partselection.cpp:344 treemap.cpp:2887 msgid "Allow Rotation" msgstr "Tillad rotation" #: callmapview.cpp:321 treemap.cpp:2889 msgid "Shading" msgstr "Skygning" #: callmapview.cpp:431 msgid "Call Map: Current is '%1'" msgstr "Kalde-kort: Nuværende er '%1'" #: callmapview.cpp:599 msgid "(no function)" msgstr "(ingen funktion)" #: callmapview.cpp:741 callmapview.cpp:858 msgid "(no call)" msgstr "(intet kald)" #: callview.cpp:45 instrview.cpp:127 sourceview.cpp:52 msgid "Cost 2" msgstr "Omkostning 2" #: callview.cpp:47 callview.cpp:51 msgid "Count" msgstr "Tæl" #: callview.cpp:48 coverageview.cpp:50 msgid "Caller" msgstr "Kalder" #: callview.cpp:52 coverageview.cpp:56 msgid "Callee" msgstr "Kaldt" #: callview.cpp:85 msgid "" "List of direct Callers

This list shows all functions calling the " "current selected one directly, together with a call count and the cost spent " "in the current selected function while being called from the function from " "the list.

An icon instead of an inclusive cost specifies that this is " "a call inside of a recursive cycle. An inclusive cost makes no sense here.

Selecting a function makes it the current selected one of this " "information panel. If there are two panels (Split mode), the function of the " "other panel is changed instead.

" msgstr "" "Liste af direkte kaldere

Denne liste viser alle funktioner der " "kalder den valgte direkte, sammen med en kald-tælling og omkostninger " "forbrugt i den aktuelle funktion der bliver kaldt fra funktionen fra listen." "

En ikon i stedet for en inklusivomkostning, angiver at dette er et " "kald indeni en rekursiv cyklus. En inklusivomkostning giver ingen mening her." "

Vælges en funktion gøres den til den aktuelle i dette " "informationspanel. Er der to paneler (Opdelt tilstand), ændres funktionen i " "det andet panel i stedet.

" #: callview.cpp:98 msgid "" "List of direct Callees

This list shows all functions called by the " "current selected one directly, together with a call count and the cost spent " "in this function while being called from the selected function.

Selecting a function makes it the current selected one of this " "information panel. If there are two panels (Split mode), the function of the " "other panel is changed instead.

" msgstr "" "Liste af direkte kaldte

Denne liste viser alle funktioner kaldt af " "den aktuelle direkte, sammen med en kald-tæller og omkostningerne forbrugt i " "denne funktion mens den bliver kaldt fra den valgte funktion.

Vælges " "en funktion gøres den til den aktuelle i dette informationspanel. Er der to " "paneler (Opdelt tilstand), ændres funktionen i det andet panel i stedet.

" #: configdlg.cpp:58 dumpselectionbase.ui:824 #, no-c-format msgid "ELF Objects" msgstr "ELF-Objekter" #: configdlg.cpp:60 msgid "Source Files" msgstr "Kildefiler" #: configdlg.cpp:61 msgid "C++ Classes" msgstr "C++ Klasser" #: configdlg.cpp:62 msgid "Function (no Grouping)" msgstr "Funktion (ingen gruppering)" #: configdlg.cpp:157 configdlg.cpp:350 configdlg.cpp:371 msgid "(always)" msgstr "(altid)" #: configdlg.cpp:210 msgid "KCachegrind Configuration" msgstr "KCachegrind indstilling" #: configdlg.cpp:211 msgid "" "The Maximum Number of List Items should be below 500.The previous set value " "(%1) will still be used." msgstr "" "Det maksimale antal listepunkter skal være under 500. Den tidligere satte " "værdi (%1) vil stadig blive brugt." #: configdlg.cpp:384 msgid "Choose Source Folder" msgstr "Vælg kildemappe" #: configuration.cpp:67 msgid "Instruction Fetch" msgstr "Instruktionshentning" #: configuration.cpp:68 msgid "Data Read Access" msgstr "Data-læseadgang" #: configuration.cpp:69 msgid "Data Write Access" msgstr "Data-skriveadgang" #: configuration.cpp:70 msgid "L1 Instr. Fetch Miss" msgstr "L1 Instr. Fetch Miss" #: configuration.cpp:71 msgid "L1 Data Read Miss" msgstr "L1 Datalæse Miss" #: configuration.cpp:72 msgid "L1 Data Write Miss" msgstr "L1 Dataskrive Miss" #: configuration.cpp:73 msgid "L2 Instr. Fetch Miss" msgstr "L2 Instr. hente Miss" #: configuration.cpp:74 msgid "L2 Data Read Miss" msgstr "L2 Datalæse Miss" #: configuration.cpp:75 msgid "L2 Data Write Miss" msgstr "L2 dataskrive Miss" #: configuration.cpp:76 #, fuzzy msgid "LL Instr. Fetch Miss" msgstr "L1 Instr. Fetch Miss" #: configuration.cpp:77 #, fuzzy msgid "LL Data Read Miss" msgstr "L1 Datalæse Miss" #: configuration.cpp:78 #, fuzzy msgid "LL Data Write Miss" msgstr "L1 Dataskrive Miss" #: configuration.cpp:79 msgid "Samples" msgstr "Smagsprøver" #: configuration.cpp:80 msgid "System Time" msgstr "Systemtid" #: configuration.cpp:81 msgid "User Time" msgstr "Brugertid" #: configuration.cpp:82 msgid "L1 Miss Sum" msgstr "L1 Miss Sum" #: configuration.cpp:83 msgid "L2 Miss Sum" msgstr "L2 Miss Sum" #: configuration.cpp:84 #, fuzzy msgid "LL Miss Sum" msgstr "L1 Miss Sum" #: configuration.cpp:85 msgid "Cycle Estimation" msgstr "Cykel-estimat" #: costlistitem.cpp:60 #, c-format msgid "" "_n: (%n item skipped)\n" "(%n items skipped)" msgstr "" "(%n punkt oversprunget)\n" "(%n punkter oversprunget)" #: costtypeitem.cpp:56 msgid "Unknown Type" msgstr "Ukendt type" #: costtypeview.cpp:42 msgid "Event Type" msgstr "Begivenhedstype" #: costtypeview.cpp:43 coverageview.cpp:46 dumpselectionbase.ui:917 #: functionselectionbase.ui:103 partview.cpp:47 #, no-c-format msgid "Incl." msgstr "Inkl." #: costtypeview.cpp:44 coverageview.cpp:53 functionselectionbase.ui:62 #: functionselectionbase.ui:114 partview.cpp:48 #, no-c-format msgid "Self" msgstr "Selv" #: costtypeview.cpp:45 msgid "Short" msgstr "Kort" #: costtypeview.cpp:47 msgid "Formula" msgstr "Formel" #: costtypeview.cpp:81 msgid "" "Cost Types List

This list shows all cost types available and what " "the self/inclusive cost of the current selected function is for that cost " "type.

By choosing a cost type from the list, you change the cost type " "of costs shown all over KCachegrind to be the selected one.

" msgstr "" "Omkostningstype-liste

Denne liste viser alle tilgængelige " "omkostningstyper og hvad egen/inklusivomkostningerne er for aktuelle " "funktion for den omkostningstype.

Ved at vælge en omkostningstype fra " "listen, ændrer du omkostningstypen for omkostninger vist overalt i " "KCachegrind til at være den valgte.

" #: costtypeview.cpp:98 msgid "Set Secondary Event Type" msgstr "Sæt sekundær begivenhedstype" #: costtypeview.cpp:100 msgid "Remove Secondary Event Type" msgstr "Fjern sekundær begivenhedstype" #: costtypeview.cpp:105 msgid "Edit Long Name" msgstr "Redigér langt navn" #: costtypeview.cpp:106 msgid "Edit Short Name" msgstr "Redigér kort navn" #: costtypeview.cpp:107 msgid "Edit Formula" msgstr "Redigér formel" #: costtypeview.cpp:115 msgid "New Cost Type ..." msgstr "Ny omkostningstype ..." #: costtypeview.cpp:149 costtypeview.cpp:154 #, c-format msgid "New%1" msgstr "Ny%1" #: costtypeview.cpp:155 #, c-format msgid "New Cost Type %1" msgstr "Ny omkostningstype %1" #: coverageitem.cpp:65 coverageitem.cpp:205 functionitem.cpp:72 #, c-format msgid "" "_n: (%n function skipped)\n" "(%n functions skipped)" msgstr "" "(%n funktion oversprunget)\n" "(%n funktioner oversprunget)" #: coverageview.cpp:48 coverageview.cpp:54 msgid "Distance" msgstr "Afstand" #: coverageview.cpp:49 dumpselectionbase.ui:928 functionselectionbase.ui:125 #: partview.cpp:49 #, no-c-format msgid "Called" msgstr "Kaldet" #: coverageview.cpp:55 msgid "Calling" msgstr "Kalder" #: coverageview.cpp:90 msgid "" "List of all Callers

This list shows all functions calling the " "current selected one, either directly or with several functions in-between " "on the stack; the number of functions in-between plus one is called the " "Distance (e.g. for function A,B,C there exists a call from A to C " "when A calls B and B calls C, i.e. A => B => C. The distance here is 2).

Absolute cost shown is the cost spent in the selected function while a " "listed function is active; relative cost is the percentage of all cost spent " "in the selected function while the listed one is active. The cost graphic " "shows logarithmic percentage with a different color for each distance.

As there can be many calls from the same function, the distance column " "sometimes shows the range of distances for all calls happening; then, in " "parentheses, there is the medium distance, i.e. the distance where most of " "the call costs happened.

Selecting a function makes it the current " "selected one of this information panel. If there are two panels (Split " "mode), the function of the other panel is changed instead.

" msgstr "" "Liste af alle kaldere

Denne liste viser alle funktioner der kalder " "den valgte, enten direkte eller med flere funktioner imellem på stakken; " "antallet af funktioner imellem øget med 1 kaldes Afstanden (f.eks. " "for funktionerne A,B,C eksisterer der et kald fra A til C når A kalder B og " "B kalder C, dvs. A => B => C. Afstanden her er 2).

De absolutte " "omkostninger der er vist er omkostninger der bruges i den valgte funktion " "mens den listede funktion er aktiv. De relative omkostninger er den " "procentdel af alle omkostninger der bruges i den valgte funktion mens den på " "listen er aktiv. Omkostningsgrafikken viser logaritmisk procent med en anden " "farve for hver afstand.

Da der kan være mange kald fra den samme " "funktion, viser afstandssøjlen sommetider området af afstande for alle kald " "der sker; så, i parentes er der middel afstanden, dvs. afstande hvor de " "fleste af kaldets omkostninger var.

Vælges en en funktion, gøres den " "til den aktuelt valgte i dette informationspanel. Hvis der er to paneler " "(Opdelt tilstand), ændres funktion for det andet panel i stedet for.

" #: coverageview.cpp:120 msgid "" "List of all Callees

This list shows all functions called by the " "current selected one, either directly or with several function in-between on " "the stack; the number of function in-between plus one is called the " "Distance (e.g. for function A,B,C there exists a call from A to C " "when A calls B and B calls C, i.e. A => B => C. The distance here is 2).

Absolute cost shown is the cost spent in the listed function while the " "selected is active; relative cost is the percentage of all cost spent in the " "listed function while the selected one is active. The cost graphic always " "shows logarithmic percentage with a different color for each distance.

As there can be many calls to the same function, the distance column " "sometimes shows the range of distances for all calls happening; then, in " "parentheses, there is the medium distance, i.e. the distance where most of " "the call costs happened.

Selecting a function makes it the current " "selected one of this information panel. If there are two panels (Split " "mode), the function of the other panel is changed instead.

" msgstr "" "Liste af alle kaldte

Denne liste viser alle funktioner der kaldt af " "den valgte, enten direkte eller med flere funktioner imellem på stakken; " "antallet af funktioner imellem øget med 1 kaldes Afstanden (f.eks. " "for funktionerne A,B,C eksisterer der et kald fra A til C når A kalder B og " "B kalder C, dvs. A => B => C. Afstanden her er 2).

Absolut omkostning " "vist er den omkostning der bruges i den valgte funktion mens listet funktion " "er aktiv; relativ omkostning den procent af al omkostning der bruges i den " "valgte funktion mens den på listen er aktiv. Omkostning-grafikken viser " "logaritmisk procent med en anden farve for hver afstand.

Da der kan " "være mange kald fra den samme funktion, viser afstandssøjlen sommetider " "området af afstande for alle kald der sker; så, i parentes er der middel " "afstanden, dvs. afstande hvor de fleste af kaldets omkostninger var.

Valg af en funktion gør den til den valgte for dette informationspanel. " "Hvis der er to paneler (Opdelt tilstand), ændres funktion for det andet " "panel i stedet for.

" #: functionselection.cpp:52 toplevel.cpp:772 msgid "(No Grouping)" msgstr "(Ingen gruppering)" #: functionselection.cpp:176 #, c-format msgid "Go to %1" msgstr "Gå til %1" #: functionselection.cpp:203 msgid "Show All Items" msgstr "Vis alle punkter" #: functionselection.cpp:226 msgid "No Grouping" msgstr "Ingen gruppering" #: functionselection.cpp:243 toplevel.cpp:763 msgid "Grouping" msgstr "Gruppering" #: instritem.cpp:106 sourceitem.cpp:86 msgid "Active call to '%1'" msgstr "Aktivt kald til '%1'" #: instritem.cpp:108 sourceitem.cpp:88 msgid "" "_n: %n call to '%1'\n" "%n calls to '%1'" msgstr "" "%n kald til '%1'\n" "%n kald til '%1'" #: instritem.cpp:137 msgid "Jump %1 of %2 times to 0x%3" msgstr "Spring %1 ud af %2 gange til 0x%3" #: instritem.cpp:142 msgid "Jump %1 times to 0x%2" msgstr "Spring %1 gange til 0x%2" #: instritem.cpp:185 sourceitem.cpp:169 msgid "(cycle)" msgstr "(cykel)" #: dumpselectionbase.ui:906 instrview.cpp:125 sourceview.cpp:50 #, no-c-format msgid "#" msgstr "#" #: instrview.cpp:129 msgid "Hex" msgstr "Hex" #: instrview.cpp:131 tabview.cpp:313 msgid "Assembler" msgstr "Assembler" #: instrview.cpp:132 msgid "Source Position" msgstr "Kildeposition" #: instrview.cpp:163 msgid "" "Annotated Assembler

The annotated assembler list shows the machine " "code instructions of the current selected function together with (self) cost " "spent while executing an instruction. If this is a call instruction, lines " "with details on the call happening are inserted into the source: the cost " "spent inside of the call, the number of calls happening, and the call " "destination.

The disassembler output shown is generated with the " "'objdump' utility from the 'binutils' package.

Select a line with call " "information to make the destination function of this call current.

" msgstr "" "Kommenteret assembler

Den kommenterede assemblerliste viser " "maskinkodeinstruktioner for den valgte funktion sammen med egenomkostningen " "brugt mens en instruktion udføres. Hvis det er en kald-instruktion, vil " "linjer med detaljer kaldet, blive indsat i kildekoden: omkostninger forbrugt " "indeni kaldet, antallet af kald og kaldets mål.

Disassembler-uddata " "der vises er genereret med 'objdump'-værktøjet fra 'binutils'-pakken.

Vælg en linje med kaldinformation for at gøre målfunktionen for dette " "kald til det aktuelle.

" #: instrview.cpp:195 #, c-format msgid "Go to Address %1" msgstr "Gå til adresse %1" #: instrview.cpp:207 msgid "Hex Code" msgstr "Hex-kode" #: instrview.cpp:426 msgid "There is no instruction info in the profile data file." msgstr "Der er ingen instruktionsinfo i profildata-filen." #: instrview.cpp:428 msgid "For the Valgrind Calltree Skin, rerun with option" msgstr "For Valgrind Calltree forside, kår igen med tilvalg" #: instrview.cpp:429 msgid " --dump-instr=yes" msgstr " --dump-instr=yes" #: instrview.cpp:430 msgid "To see (conditional) jumps, additionally specify" msgstr "For at se (betingede) spring, angiv yderligere" #: instrview.cpp:431 msgid " --trace-jump=yes" msgstr " --trace-jump=yes" #: instrview.cpp:629 msgid "There is an error trying to execute the command" msgstr "Der er en fejl ved forsøget på at køre kommandoen" #: instrview.cpp:634 instrview.cpp:900 msgid "Check that you have installed 'objdump'." msgstr "Tjek at du har installeret 'objdump'" #: instrview.cpp:636 instrview.cpp:902 msgid "This utility can be found in the 'binutils' package." msgstr "Dette redskab kan findes i 'binutils'-pakken." #: instrview.cpp:739 msgid "(No Assembler)" msgstr "(Ingen assembler)" #: instrview.cpp:875 #, c-format msgid "" "_n: There is %n cost line without assembler code.\n" "There are %n cost lines without assembler code." msgstr "" "Der er %n omkostningslinje uden assembler-kode.\n" "Der er %n omkostningslinjer uden assembler-kode." #: instrview.cpp:877 msgid "This happens because the code of" msgstr "Dette sker på grund af koden i" #: instrview.cpp:880 msgid "does not seem to match the profile data file." msgstr "synes ikke at passe til profildata-filen." #: instrview.cpp:883 msgid "Are you using an old profile data file or is the above mentioned" msgstr "Bruger du en gammel profildata-fil eller er ovennævnte" #: instrview.cpp:885 msgid "ELF object from an updated installation/another machine?" msgstr "ELF-objekt fra en opdateret installation/en anden maskine?" #: instrview.cpp:893 msgid "There seems to be an error trying to execute the command" msgstr "Der synes at være en fejl ved forsøget på at køre kommandoen" #: instrview.cpp:898 msgid "Check that the ELF object used in the command exists." msgstr "Tjek at ELF-objektet der bruges i kommandoen eksisterer." #: main.cpp:38 msgid "Run under cachegrind" msgstr "Kør under cachegrind" #: main.cpp:39 msgid "Show information of this trace" msgstr "Vis information for dette spor" #: main.cpp:46 msgid "KCachegrind" msgstr "KCachegrind" #: main.cpp:48 msgid "TDE Frontend for Cachegrind" msgstr "TDE's forende for Cachegrind" #: main.cpp:50 msgid "(C) 2002, 2003, 2004" msgstr "(C) 2002, 2003, 2004" #: main.cpp:53 msgid "Author/Maintainer" msgstr "Forfatter/Vedligeholder" #: partgraph.cpp:167 #, c-format msgid "Profile Part %1" msgstr "Profil part %1" #: partgraph.cpp:226 msgid "(no trace)" msgstr "(intet spor)" #: partgraph.cpp:229 msgid "(no part)" msgstr "(ingen part)" #: partgraph.cpp:423 tracedata.cpp:249 tracedata.cpp:254 tracedata.cpp:2824 #: tracedata.cpp:3241 tracedata.cpp:3327 tracedata.cpp:4165 tracedata.cpp:4173 #: tracedata.cpp:4238 msgid "(unknown)" msgstr "(ukendt)" #: partlistitem.cpp:49 msgid " (Thread %1)" msgstr " (Tråd %1)" #: partlistitem.cpp:56 msgid "(none)" msgstr "(ingen)" #: partselection.cpp:151 msgid "Profile Part Overview: Current is '%1'" msgstr "Profilpart overblik: Denne er '%1'" #: partselection.cpp:287 msgid "Deselect" msgstr "Afmarkér" #: partselection.cpp:287 partselection.cpp:311 msgid "Select" msgstr "Markér" #: partselection.cpp:292 msgid "Select All Parts" msgstr "Markér alle parter" #: partselection.cpp:294 msgid "Visible Parts" msgstr "Synlige parter" #: partselection.cpp:296 msgid "Hide Selected Parts" msgstr "Skjul markerede parter" #: partselection.cpp:297 msgid "Unhide Hidden Parts" msgstr "Afskjul skjulte parter" #: partselection.cpp:302 toplevel.cpp:1687 msgid "Go Back" msgstr "Gå tilbage" #: partselection.cpp:322 msgid "Partitioning Mode" msgstr "Partitionerings-tilstand" #: partselection.cpp:323 msgid "Diagram Mode" msgstr "Diagramtilstand" #: partselection.cpp:324 msgid "Zoom Function" msgstr "Forstørrelses-funktion" #: partselection.cpp:325 msgid "Show Direct Calls" msgstr "Vis direkte kald" #: partselection.cpp:326 msgid "Increment Shown Call Levels" msgstr "Forøg viste kald-niveauer" #: partselection.cpp:340 msgid "Draw Names" msgstr "Tegn navne" #: partselection.cpp:341 msgid "Draw Costs" msgstr "Tegn omkostninger" #: partselection.cpp:343 msgid "Draw Frames" msgstr "Tegn rammer" #: partselection.cpp:359 msgid "Hide Info" msgstr "Skjul info" #: partselection.cpp:361 msgid "Show Info" msgstr "Vis info" #: partselection.cpp:541 msgid "(no trace loaded)" msgstr "(intet spor indlæst)" #: partview.cpp:46 tracedata.cpp:179 msgid "Profile Part" msgstr "Profilpart" #: partview.cpp:51 msgid "Comment" msgstr "Kommentar" #: partview.cpp:73 msgid "" "Trace Part List

This list shows all trace parts of the loaded " "trace. For each part, the self/inclusive cost of the current selected " "function, spent in the part, is shown; percentage costs are always relative " "to the total cost of the part (not to the whole trace as in the " "Trace Part Overview). Also shown are the calls happening to/from the current " "function inside of the trace part.

By choosing one or more trace parts " "from the list, the costs shown all over KCachegrind will only be the ones " "spent in the selected part(s). If no list selection is shown, in fact all " "trace parts are selected implicitly.

This is a multi-selection list. " "You can select ranges by dragging the mouse or use SHIFT/CTRL modifiers. " "Selection/Deselection of trace parts can also be done by using the Trace " "Part Overview Dockable. This one also supports multiple selection.

Note that the list is hidden if only one trace part is loaded.

" msgstr "" "Spor-part-liste

Denne liste viser alle spor-parter for det indlæste " "spor. For hver part vises egen-/inklusivomkostninger for den valgte funktion " "der bruges i parten; procentomkostninger er altid relativt til den totale " "omkostning for parten (ikke til hele sporet som i spor-part-" "overblikket). Kald der sker til/fra denne funktion indeni spor-parten, vises " "også.

Ved at vælge en eller flere spor-parter fra listen, vil " "omkostningerne der vises globalt i KCachegrind begrænses til netop dem i de " "valgte parter. Hvis ingen er markeret på listen, vælges alle spor-parter " "implicit.

Dette er en multivalg-liste. Du kan vælge områder ved at " "trække musen eller bruge SHIFT/CTRL-tasterne. Markering/afmarkering af spor-" "parter kan også udføres ved brug af det dokbare spor-parts overblik. Den " "understøtter også multivalg.

Bemærk at listen er skjult hvis der kun " "er indlæst én spor-part.

" #: partview.cpp:106 msgid "Select '%1'" msgstr "Vælg '%1'" #: partview.cpp:107 msgid "Hide '%1'" msgstr "Skjul '%1'" #: partview.cpp:111 msgid "Hide Selected" msgstr "Skjul valgt" #: partview.cpp:112 msgid "Show All" msgstr "Vis alt" #: sourceitem.cpp:125 msgid "Jump %1 of %2 times to %3" msgstr "Spring %1 ud af %2 gange til %3" #: sourceitem.cpp:130 msgid "Jump %1 times to %2" msgstr "Spring %1 gange til %2" #: sourceview.cpp:54 sourceview.cpp:554 msgid "Source (unknown)" msgstr "Kilde (ukendt)" #: sourceview.cpp:89 msgid "" "Annotated Source

The annotated source list shows the source lines " "of the current selected function together with (self) cost spent while " "executing the code of this source line. If there was a call in a source " "line, lines with details on the call happening are inserted into the source: " "the cost spent inside of the call, the number of calls happening, and the " "call destination.

Select a inserted call information line to make the " "destination function current.

" msgstr "" "Kommenteret kildekode

Den kommenterede kildekodeliste viser " "kildelinjerne for den valgte funktion sammen med egenomkostningerne forbrugt " "under udførsel af koden for denne kildelinje. Hvis der var et kald i en " "kildelinje, vil linjer med detaljer om kaldet blive indsat i kildekoden: " "omkostningerne forbrugt indeni kaldet, antallet af kald og kaldets mål.

Vælg en indsat kaldinformationslinje for at gøre målfunktionen til den " "aktuelle.

" #: sourceview.cpp:120 #, c-format msgid "Go to Line %1" msgstr "Gå til linje %1" #: sourceview.cpp:293 msgid "(No Source)" msgstr "(Ingen kilde)" #: sourceview.cpp:512 msgid "There is no cost of current selected type associated" msgstr "Der er ingen omkostning af valgt type associeret" #: sourceview.cpp:514 msgid "with any source line of this function in file" msgstr "med nogen kildelinje for denne funktion i filen" #: sourceview.cpp:518 msgid "Thus, no annotated source can be shown." msgstr "Derfor kan ingen annoteret kilde vises." #: sourceview.cpp:553 msgid "Source ('%1')" msgstr "Kilde ('%1')" #: sourceview.cpp:559 msgid "--- Inlined from '%1' ---" msgstr "--- Indlejret fra '%1' ---" #: sourceview.cpp:560 msgid "--- Inlined from unknown source ---" msgstr "--- Indlejret fra ukendt kilde ---" #: sourceview.cpp:565 msgid "There is no source available for the following function:" msgstr "Der er ingen kilde tilgængelig for følgende funktion:" #: sourceview.cpp:570 msgid "This is because no debug information is present." msgstr "Dette er fordi ingen fejlretningsinformation er til stede." #: sourceview.cpp:572 msgid "Recompile source and redo the profile run." msgstr "Rekompilér kilde og gør profilkørsel igen." #: sourceview.cpp:575 msgid "The function is located in this ELF object:" msgstr "Funktionen er placeret i dette ELF-objekt:" #: sourceview.cpp:583 msgid "This is because its source file cannot be found:" msgstr "Dette er fordi da dens kildefil ikke kan findes:" #: sourceview.cpp:587 msgid "Add the folder of this file to the source folder list." msgstr "Tilføj mappen for denne fil til listen af kildemapper." #: sourceview.cpp:589 msgid "The list can be found in the configuration dialog." msgstr "Listen kan findes i indstillingsdialogen." #: tabview.cpp:64 msgid "Move to Top" msgstr "Flyt til toppen" #: tabview.cpp:68 msgid "Move to Right" msgstr "Flyt til højre" #: tabview.cpp:72 msgid "Move to Bottom" msgstr "Flyt til bunden" #: tabview.cpp:76 msgid "Move to Bottom Left" msgstr "Flyt til nede til venstre" #: tabview.cpp:77 tabview.cpp:94 treemap.cpp:2908 msgid "Bottom Left" msgstr "For neden til venstre" #: tabview.cpp:79 msgid "Move Area To" msgstr "Flyt område til" #: tabview.cpp:81 msgid "Hide This Tab" msgstr "Skjul dette faneblad" #: tabview.cpp:82 msgid "Hide Area" msgstr "Skjul område" #: tabview.cpp:95 msgid "Show Hidden On" msgstr "Vis skjult for" #: tabview.cpp:242 msgid "(No profile data file loaded)" msgstr "(Ingen profildata-fil indlæst)" #: tabview.cpp:281 msgid "Types" msgstr "Typer" #: tabview.cpp:284 msgid "Callers" msgstr "Kaldere" #: tabview.cpp:287 msgid "All Callers" msgstr "Alle kaldere" #: tabview.cpp:290 msgid "Caller Map" msgstr "Kalder-kort" #: tabview.cpp:293 msgid "Source" msgstr "Kilde" #: tabview.cpp:297 msgid "Parts" msgstr "Dele" #: tabview.cpp:300 msgid "Call Graph" msgstr "Kald-graf" #: tabview.cpp:303 msgid "Callees" msgstr "Kaldte" #: tabview.cpp:306 msgid "All Callees" msgstr "Alle kaldte" #: tabview.cpp:310 msgid "Callee Map" msgstr "Oversigt over kaldte" #: tabview.cpp:553 msgid "" "Information Tabs

This widget shows information for the current " "selected function in different tabs:

  • The Costs tab shows a list of " "available event types and the inclusive and self costs regarding to these " "types.
  • The Parts tab shows a list of trace parts if the trace " "consists of more than one part (otherwise, this tab is hided). The cost of " "the selected function spent in the different parts together with the calls " "happening is shown.
  • The Call Lists tab shows direct callers and " "callees of the function in more detail.
  • The Coverage tab shows the " "same is the Call Lists tab, but not only direct callers and callees but also " "indirect ones.
  • The Call Graph tab shows a graphical visualization of " "the calls done by this function.
  • The Source tab presents annotated " "source code if debugging information and the source file is available.
  • The Assembler tab presents annotated assembler code if trace " "information on instruction level is available.
For more " "information, see the What's This? help of the corresponding tab " "widget

" msgstr "" "Informationsfaneblade

Denne kontrol viser information for den " "valgte funktion i forskellige faneblade:

  • Fanebladet Omkostninger " "viser en liste af tilgængelige omkostningstyper og inkluseive og egen-" "omkostninger med hensyn til disse typer.
  • Part-fanebladet viser en " "liste af spor-parter, hvis sporet består af mere end en part (ellers er " "dette faneblad skjult). Der vises omkostninger forbrugt i de forskellige " "parter af den aktuelle funktion, sammen med de kald der sker.
  • Kaldte-" "lister-fanebladet viser mere detaljeret de direkte kaldere og kaldte af " "funktionen.
  • Dækning-fanebladet viser det samme som i kaldte-lister-" "fanebladet, men ikke blot direkte kaldere og kaldte, men også indirekte.
  • Kaldgraf-fanebladet er en grafisk visualisering af de kald der " "udføres af denne funktion.
  • Kilde-fanebladet viser kommenteret " "kildekode hvis fejlretningsinformation og kildefil er tilgængelig.
  • Assembler-fanebladet viser kommenteret assemblerkode hvis " "sporinformation på instruktionsniveau er tilgængelig.
For mere " "information, se Hvad er dette?-hjælp for den tilsvarende " "fanebladskontrol

" #: tabview.cpp:630 msgid "(No Data loaded)" msgstr "(Ingen data indlæst)" #: tabview.cpp:631 msgid "(No function selected)" msgstr "(Ingen funktion valgt)" #: partselectionbase.ui:16 toplevel.cpp:276 toplevel.cpp:576 #, no-c-format msgid "Parts Overview" msgstr "Part-overblik" #: toplevel.cpp:283 msgid "" "The Parts Overview

A trace consists of multiple trace parts when " "there are several profile data files from one profile run. The Trace Part " "Overview dockable shows these, horizontally ordered in execution time; the " "rectangle sizes are proportional to the total cost spent in the parts. You " "can select one or several parts to constrain all costs shown to these parts " "only.

The parts are further subdivided: there is a partitioning and an " "callee split mode:

  • Partitioning: You see the partitioning into " "groups for a trace part, according to the group type selected. E.g. if ELF " "object groups are selected, you see colored rectangles for each used ELF " "object (shared library or executable), sized according to the cost spent " "therein.
  • Callee: A rectangle showing the inclusive cost of the " "current selected function in the trace part is shown. This is split up into " "smaller rectangles to show the costs of its callees.

" msgstr "" "Part-overblik

Et spor består af flere spor-parter når der er flere " "spor-filer fra en profil-kørsel. Spor-part-overblikkets dokbare viser disse, " "ordnet vandret efter kørselstid. Rektanglernes størrelser er proportionale " "med den totale omkostning forbrugt i parterne. Du kan vælge en eller flere " "parter for at begrænse de viste omkostninger til kun disse parter.

Parterne er yderligere underinddelt: der er en partitionering og en " "kaldt-opdelt tilstand:

  • Partitionering: Du ser partitioneringen i " "grupper for en spor-part, i henhold til den valgte gruppe. Hvis f.eks. ELF-" "objektgrupper er valgt, ser du farvede rektangler for hvert brugt ELF-objekt " "(delt bibliotek eller kørbar), med størrelse der følger den omkostning der " "er brugt deri.
  • Kalder: Et rektangel der afspejler den inklusive " "omkostning af den valgte funktion i spor-parten vises. Denne er igen opdelt " "i mindre rektangler for at vise kaldernes omkostninger.

" #: toplevel.cpp:313 msgid "Top Cost Call Stack" msgstr "Topomkostning kaldstak" #: toplevel.cpp:315 msgid "" "The Top Cost Call Stack

This is a purely fictional 'most probable' " "call stack. It is built up by starting with the current selected function " "and adds the callers/callees with highest cost at the top and to bottom.

The Cost and Calls columns show the cost used for all " "calls from the function in the line above.

" msgstr "" "Top-omkostning kald-stak

Dette er en rent forestillet 'mest " "sandsynlig' kald-stak. Den er bygget op startende med den valgte funktion og " "tilføjer så kaldere/kaldte med den højeste omkostning foroven og forneden.

Omkostning- og Kald-søjlerne viser omkostninger brugt på " "alle kald fra funktionen i linjen ovenfor.

" #: toplevel.cpp:328 msgid "Flat Profile" msgstr "Flad profil" #: toplevel.cpp:338 msgid "" "The Flat Profile

The flat profile contains a group and a function " "selection list. The group list contains all groups where costs are spent in, " "depending on the chosen group type. The group list is hidden when group type " "'Function' is selected.

The function list contains the functions of the " "selected group (or all for 'Function' group type), ordered by the costs " "spent therein. Functions with costs less than 1% are hidden on default.

" msgstr "" "Flad profil

Den flade profil indeholder en gruppe og en " "funktionmarkeringsliste. Gruppelisten indeholder alle grupper hvor " "omkostninger er brugt, afhængig af valgte gruppetype. Gruppelisten er skjult " "når gruppetypen 'Funktion' er valgt.

Funktionslisten indeholder " "funktionerne for den valgte gruppe (eller alle af 'Funktion' gruppetype), " "ordnet efter de omkostninger der brugt deri. Funktioner med omkostninger " "mindre end 1% er skjult i standardopsætningen.

" #: dumpselectionbase.ui:16 toplevel.cpp:352 toplevel.cpp:604 #, no-c-format msgid "Profile Dumps" msgstr "Profil-dump" #: toplevel.cpp:362 msgid "" "Profile Dumps

This dockable shows in the top part the list of " "loadable profile dumps in all subdirectories of:

  • current working " "directory of KCachegrind, i.e. where it was started from, and
  • the " "default profile dump directory given in the configuration.
The list is " "sorted according the the target command profiled in the corresponding dump.

On selecting a profile dump, information for it is shown in the bottom " "area of the dockable:

  • Options allows you to view the profiled " "command and profile options of this dump. By changing any item, a new (yet " "unexisting) profile template is created. Press Run Profile to start " "aprofile run with these options in the background.
  • Info gives " "detailed info on the selected dump like event cost summary and properties of " "the simulated cache.
  • State is only available for current " "happening profiles runs. Press Update to see different counters of " "the run, and a stack trace of the current position in the program profiled. " "Check the Every option to let KCachegrind regularly poll these data. " "Check the Sync option to let the dockable activate the top function " "in the current loaded dump.

" msgstr "" "Profil-dump

Denne dokbare viser i den øverste del listen af " "indlæsbare profil-dump i alle underkataloger af:

  • nuværende " "arbejdskatalog for KCachegrind, dvs hvor den blev startet fra, og " "
  • standard profil-dump katalog givet i opsætningen.
Listen er " "sorteret efter målkommandoen profileret i det tilsvarende dump.

Ved " "valg af et profil-dump, vises information for den i det nederste område af " "den dokbare:

  • Indstillinger tillader dig at se den profilerede " "kommando og profil-tilvalg for denne dump. Ved at ændre et punkt, laves en " "ny (endnu ikke eksisterende) profil-skabelon. Tryk på Kør profil for " "at starte en profil-kørsel med disse tilvalg i baggrunden.
  • Info " "giver detaljeret info om det valgte dump såsom et sammendrag for " "begivenhedens omkostning og den simulerede cache's egenskaber. " "
  • Tilstand er kun tilgængelig for profil-kørsler der kører lige nu. " "Tryk på Opdatér for at se forskellige tællere for kørslen, og et stak-" "spor for positionen i programmet profileret. Afkryds Hver-tilvalget " "for at lade KCachegrind trække disse data regulært. Afkryds Sync-" "tilvalget for at lade den dokbare aktivere topfunktionen i den indlæste dump." "

" #: toplevel.cpp:450 msgid "&Duplicate" msgstr "&Duplikér" #: toplevel.cpp:454 msgid "" "Duplicate Current Layout

Make a copy of the current layout.

" msgstr "Duplikér dette layout

Lav en kopi af dette layout.

" #: toplevel.cpp:461 msgid "" "Remove Current Layout

Delete current layout and make the previous " "active.

" msgstr "" "Fjern dette layout

Slet dette layout og gør det tidligere aktivt." #: toplevel.cpp:465 msgid "&Go to Next" msgstr "&Gå til næste" #: toplevel.cpp:469 msgid "Go to Next Layout" msgstr "Gå til næste layout" #: toplevel.cpp:472 msgid "&Go to Previous" msgstr "&Gå til forrige" #: toplevel.cpp:476 msgid "Go to Previous Layout" msgstr "Gå til forrige layout" #: toplevel.cpp:479 msgid "&Restore to Default" msgstr "&Nulstil til standard" #: toplevel.cpp:482 msgid "Restore Layouts to Default" msgstr "Nulstiller layout til standard" #: toplevel.cpp:485 msgid "&Save as Default" msgstr "&Gem som standard" #: toplevel.cpp:488 msgid "Save Layouts as Default" msgstr "Gem layout som standard" #: toplevel.cpp:499 msgid "New

Open new empty KCachegrind window.

" msgstr "Ny

Åbn nyt tomt KCachegrind-vindue.

" #: toplevel.cpp:502 msgid "&Add..." msgstr "&Tilføj..." #: toplevel.cpp:505 msgid "" "Add Profile Data

This opens an additional profile data file in the " "current window.

" msgstr "" "Tilføj profildata

Dette åbner endnu en profildata-fil i nuværende " "vindue.

" #: toplevel.cpp:517 msgid "Reload Profile Data

This loads any new created parts, too.

" msgstr "" "Genindlæs profildata

Dette indlæser også alle nyligt oprettede " "parter.

" #: toplevel.cpp:521 msgid "&Export Graph" msgstr "&Eksportér graf" #: toplevel.cpp:525 msgid "" "Export Call Graph

Generates a file with extension .dot for the " "tools of the GraphViz package.

" msgstr "" "Eksportér kald-graf

Genererer en fil med endelsen .dot for " "værktøjerne i GraphViz-pakken.

" #: toplevel.cpp:531 msgid "&Force Dump" msgstr "&Påtving dump" #: toplevel.cpp:540 msgid "" "Force Dump

This forces a dump for a Callgrind profile run in the " "current directory. This action is checked while KCachegrind looks for the " "dump. If the dump is finished, it automatically reloads the current trace. " "If this is the one from the running Callgrind, the new created trace part " "will be loaded, too.

Force dump creates a file 'callgrind.cmd', and " "checks every second for its existence. A running Callgrind will detect this " "file, dump a trace part, and delete 'callgrind.cmd'. The deletion is " "detected by KCachegrind, and it does a Reload. If there's no " "Callgrind running, press 'Force Dump' again to cancel the dump request. This " "deletes 'callgrind.cmd' itself and stops polling for a new dump.

Note: " "A Callgrind run only detects existence of 'callgrind.cmd' when " "actively running a few milliseconds, i.e. not sleeping. Tip: For a " "profiled GUI program, you can awake Callgrind e.g. by resizing a window of " "the program.

" msgstr "" "Påtving dump

Dette tvinger en dump for en Callgrind profil-kørsel i " "det aktuelle katalog. Denne handling tjekkes mens KCachegrind kigger efter " "dumpen. Når dumpen er afsluttet, genindlæser den automatisk det aktuelle " "spor. Hvis det er den fra kørslen af Callgrind, vil den nylige spor-part " "også blive indlæst.

Påtving dump laver en fil 'callgrind.cmd', og " "tjekker hvert sekund for dens eksistens. En kørende Callgrind vil detektere " "denne fil, dumpe en spor-part, og slette 'callgrind.cmd'. Sletningen " "detekteres af KCachegrind, og den foretager en genindlæsning. Hvis der " "ikke er nogen Callgrind der kører, tryk da på 'Påtving dump' igen " "for at annullere dump-forespørgslen. Dette sletter 'callgrind.cmd' selv og " "holder op med at forespørge en ny dump.

Bemærk: En Callgrind kørsel " "only detekterer eksistensen af 'callgrind.cmd' når den har kørt " "aktivt nogle få millisekunder, dvs den ikke sover. Vink: For et " "profileret GUI-program, kan du vække Callgrind f. eks. ved at ændre " "størrelse for programmets vindue.

" #: toplevel.cpp:565 msgid "" "Open Profile Data

This opens a profile data file, with possible " "multiple parts

" msgstr "" "Åbn profildata

Dette åbner en profildata-fil, muligvis med flere " "dele

" #: toplevel.cpp:581 msgid "Show/Hide the Parts Overview Dockable" msgstr "Vis/Skjul part overblik-dokbar" #: toplevel.cpp:585 msgid "Call Stack" msgstr "Kaldstak" #: toplevel.cpp:590 msgid "Show/Hide the Call Stack Dockable" msgstr "Vis/Skjul kaldstakkens dokbare" #: functionselectionbase.ui:16 toplevel.cpp:594 #, no-c-format msgid "Function Profile" msgstr "Funktionsprofil" #: toplevel.cpp:599 msgid "Show/Hide the Function Profile Dockable" msgstr "Vis/Skjul funktionprofilens dokbare" #: toplevel.cpp:609 msgid "Show/Hide the Profile Dumps Dockable" msgstr "Vis/Skjul profil-dump dokbar" #: toplevel.cpp:614 msgid "Show Relative Costs" msgstr "Vis relative omkostninger" #: toplevel.cpp:621 msgid "Show Absolute Costs" msgstr "Vis absolutte omkostninger" #: toplevel.cpp:624 msgid "Show relative instead of absolute costs" msgstr "Vis relative i stedet for absolutte omkostninger" #: toplevel.cpp:628 msgid "Percentage Relative to Parent" msgstr "Procent relativ til afledt fra" #: toplevel.cpp:634 msgid "Show percentage costs relative to parent" msgstr "Vis procent omkostninger relativ til den der er afledt fra" #: toplevel.cpp:638 msgid "" "Show percentage costs relative to parent

If this is switched off, " "percentage costs are always shown relative to the total cost of the profile " "part(s) that are currently browsed. By turning on this option, percentage " "cost of shown cost items will be relative to the parent cost item." "

    Cost TypeParent Cost
    Function CumulativeTotal
    Function SelfFunction Group (*) / Total
    CallFunction " "Cumulative
    Source LineFunction Cumulative

    (*) Only if function grouping is switched on (e.g. ELF object " "grouping)." msgstr "" "Vis procent omkostninger relativ til afledt fra

    Hvis dette r slået " "fra, vil procent omkostninger altid vises relativt til de totale " "omkostninger af de profil-parter der bliver gennemset for øjeblikket. Ved at " "slå dette til, vil procent omkostningerne der vises være relativt til " "omkostningerne for det punkt (parent) de er afledt fra. " "

      (*) Kun hvis funktionsgruppering er slået til (f.eks. ELF objekt-" "gruppering)." #: toplevel.cpp:653 msgid "Do Cycle Detection" msgstr "Udfør cykel-detektion" #: toplevel.cpp:659 msgid "Skip Cycle Detection" msgstr "Overspring cykeldetektion" #: toplevel.cpp:662 msgid "" "Detect recursive cycles

      If this is switched off, the treemap " "drawing will show black areas when a recursive call is made instead of " "drawing the recursion ad infinitum. Note that the size of black areas often " "will be wrong, as inside recursive cycles the cost of calls cannot be " "determined; the error is small, however, for false cycles (see " "documentation).

      The correct handling for cycles is to detect them and " "collapse all functions of a cycle into a virtual function, which is done " "when this option is selected. Unfortunately, with GUI applications, this " "often will lead to huge false cycles, making the analysis impossible; " "therefore, there is the option to switch this off." msgstr "" "Detektér rekursive cykler

      Hvis dette er slået fra vil trækortet " "vise sorte områder når et rekursivt kald laves, i stedet for at tegne " "rekursionen i det uendelige. Bemærk at størrelsen af sorte områder ofte vil " "være forkert, idet du ikke kan afgøre omkostningen af et kald indeni " "rekursive cykler; fejlen er imidlertid lille for falske cykler (se " "dokumentationen).

      Den rigtige håndtering for cykler er at detektere dem " "og kollapse alle funktioner for en cykel til en virtuel funktion, hvilket " "gøres når dette tilvalg er markeret. Uheldigvis vil dette ofte føre til " "kæmpestore falske cykler med GUI-programmer, og gør derved analyse umulig. " "Derfor er der muligheden for at slå dette fra." #: toplevel.cpp:684 toplevel.cpp:724 msgid "Go back in function selection history" msgstr "Gå tilbage i funktionvalgshistorikken" #: toplevel.cpp:690 toplevel.cpp:736 msgid "Go forward in function selection history" msgstr "Gå frem i funktionvalgshistorikken" #: toplevel.cpp:696 toplevel.cpp:710 msgid "" "Go Up

      Go to last selected caller of current function. If no caller " "was visited, use that with highest cost.

      " msgstr "" "Gå op

      Gå til sidst valgte kalder af denne funktion. Hvis ingen " "kalder blev besøgt, så brug den med den højeste omkostning.

      " #: toplevel.cpp:702 msgid "&Up" msgstr "&Op" #: toplevel.cpp:741 toplevel.cpp:1646 msgid "Primary Event Type" msgstr "Primær begivenhedstype" #: toplevel.cpp:743 msgid "Select primary event type of costs" msgstr "Vælg primær begivenhedstype for omkostninger" #: toplevel.cpp:753 toplevel.cpp:1649 msgid "Secondary Event Type" msgstr "Sekundær begivenhedstype" #: toplevel.cpp:755 msgid "Select secondary event type for cost e.g. shown in annotations" msgstr "" "Vælg sekundær begivenhedstype for omkostninger f.eks. vist i påtegninger" #: toplevel.cpp:766 msgid "Select how functions are grouped into higher level cost items" msgstr "" "Vælg hvordan funktioner er grupperet i højere niveau omkostningspunkter" #: toplevel.cpp:782 msgid "Split" msgstr "Opdelt" #: toplevel.cpp:786 msgid "Show two information panels" msgstr "Vis to informationspaneler" #: toplevel.cpp:790 #, fuzzy msgid "Split Horizontal" msgstr "Opdel vandret" #: toplevel.cpp:795 #, fuzzy msgid "Change Split Orientation when main window is split." msgstr "Ændr opdelingsorienteringen når hovedvinduet opdeles" #: toplevel.cpp:803 msgid "Tip of the &Day..." msgstr "&Dagens vink..." #: toplevel.cpp:804 msgid "Show \"Tip of the Day\"" msgstr "Vis \"Dagens vink\"" #: toplevel.cpp:1007 toplevel.cpp:1056 msgid "" "cachegrind.out* callgrind.out*|Callgrind Profile Data\n" "*|All Files" msgstr "" "cachegrind.out* callgrind.out*|Callgrind profildata\n" "*|Alle filer" #: toplevel.cpp:1009 msgid "Select Callgrind Profile Data" msgstr "Vælg Callgrind profildata" #: toplevel.cpp:1058 msgid "Add Callgrind Profile Data" msgstr "Tilføj Callgrind profildata" #: toplevel.cpp:1216 toplevel.cpp:1569 msgid "(Hidden)" msgstr "(Skjult)" #: toplevel.cpp:1621 msgid "Hide" msgstr "Skjul" #: toplevel.cpp:1654 msgid "Show Absolute Cost" msgstr "Vis absolutte omkostninger" #: toplevel.cpp:1657 msgid "Show Relative Cost" msgstr "Vis relativ omkostning" #: toplevel.cpp:1688 msgid "Go Forward" msgstr "Gå fremad" #: toplevel.cpp:1689 msgid "Go Up" msgstr "Gå op" #: toplevel.cpp:1921 #, c-format msgid "Layout Count: %1" msgstr "Layout antal: %1" #: toplevel.cpp:1928 msgid "No profile data file loaded." msgstr "Ingen profildata indlæst." #: toplevel.cpp:1937 msgid "Total %1 Cost: %2" msgstr "Total %1 Omkostning: %2" #: toplevel.cpp:1949 msgid "No event type selected" msgstr "Ingen begivenhedstype valgt" #: toplevel.cpp:2194 toplevel.cpp:2230 toplevel.cpp:2266 msgid "(No Stack)" msgstr "(Ingen stak)" #: toplevel.cpp:2200 msgid "(No next function)" msgstr "(Ingen næste funktion)" #: toplevel.cpp:2236 msgid "(No previous function)" msgstr "(Ingen forrige funktion)" #: toplevel.cpp:2271 msgid "(No Function Up)" msgstr "(Ingen funktion op)" #: tracedata.cpp:153 msgid "Abstract Item" msgstr "Abstrakt punkt" #: tracedata.cpp:154 msgid "Cost Item" msgstr "Omkostningspunkt" #: tracedata.cpp:155 msgid "Part Source Line" msgstr "Part kildelinje" #: tracedata.cpp:156 msgid "Source Line" msgstr "Kildelinje" #: tracedata.cpp:157 msgid "Part Line Call" msgstr "Part linjekald" #: tracedata.cpp:158 msgid "Line Call" msgstr "Linjekald" #: tracedata.cpp:159 msgid "Part Jump" msgstr "Part spring" #: tracedata.cpp:160 msgid "Jump" msgstr "Spring" #: tracedata.cpp:161 msgid "Part Instruction" msgstr "Part instruktion" #: tracedata.cpp:162 msgid "Instruction" msgstr "Instruktion" #: tracedata.cpp:163 msgid "Part Instruction Jump" msgstr "Part instruktionsspring" #: tracedata.cpp:164 msgid "Instruction Jump" msgstr "Instruktionsspring" #: tracedata.cpp:165 msgid "Part Instruction Call" msgstr "Part instruktionskald" #: tracedata.cpp:166 msgid "Instruction Call" msgstr "Instruktionskald" #: tracedata.cpp:167 msgid "Part Call" msgstr "Part kald" #: tracedata.cpp:168 msgid "Call" msgstr "Kald" #: tracedata.cpp:169 msgid "Part Function" msgstr "Part funktion" #: tracedata.cpp:170 msgid "Function Source File" msgstr "Funktion kildefil" #: dumpselectionbase.ui:300 dumpselectionbase.ui:939 #: functionselectionbase.ui:136 stackselectionbase.ui:64 tracedata.cpp:171 #, no-c-format msgid "Function" msgstr "Funktion" #: tracedata.cpp:172 msgid "Function Cycle" msgstr "Funktionscykel" #: tracedata.cpp:173 msgid "Part Class" msgstr "Part klasse" #: tracedata.cpp:174 msgid "Class" msgstr "Klasse" #: tracedata.cpp:175 msgid "Part Source File" msgstr "Part kildefil" #: tracedata.cpp:176 msgid "Source File" msgstr "Kildefil" #: tracedata.cpp:177 msgid "Part ELF Object" msgstr "Part ELF-objekt" #: tracedata.cpp:178 msgid "ELF Object" msgstr "ELF-objekt" #: tracedata.cpp:180 msgid "Program Trace" msgstr "Program-spor" #: tracedata.cpp:241 msgid "%1 from %2" msgstr "%1 fra %2" #: tracedata.cpp:2583 msgid "(no caller)" msgstr "(ingen kalder)" #: tracedata.cpp:2590 tracedata.cpp:2609 msgid "%1 via %2" msgstr "%1 via %2" #: tracedata.cpp:2599 msgid "(no callee)" msgstr "(ingen kaldt)" #: tracedata.cpp:4467 msgid "(not found)" msgstr "(ikke fundet)" #: tracedata.cpp:5017 msgid "Recalculating Function Cycles..." msgstr "Genberegner funktionscykler..." #: traceitemview.cpp:53 msgid "No description available" msgstr "Ingen beskrivelse tilgængelig" #: treemap.cpp:1281 #, c-format msgid "Text %1" msgstr "Tekst %1" #: treemap.cpp:2809 msgid "Recursive Bisection" msgstr "Rekursiv bisektion" #: treemap.cpp:2810 msgid "Columns" msgstr "Søjler" #: treemap.cpp:2811 msgid "Rows" msgstr "Rækker" #: treemap.cpp:2812 msgid "Always Best" msgstr "Altid bedst" #: treemap.cpp:2813 msgid "Best" msgstr "Bedste" #: treemap.cpp:2814 msgid "Alternate (V)" msgstr "Alternér (V)" #: treemap.cpp:2815 msgid "Alternate (H)" msgstr "Alternér (H)" #: treemap.cpp:2872 msgid "Nesting" msgstr "Indeni hinanden" #: treemap.cpp:2875 msgid "Correct Borders Only" msgstr "Kun rigtige kanter" #: treemap.cpp:2877 treemap.cpp:2878 treemap.cpp:2879 treemap.cpp:2880 #, c-format msgid "Width %1" msgstr "Bredde %1" #: treemap.cpp:2902 msgid "Visible" msgstr "Synlig" #: treemap.cpp:2903 msgid "Take Space From Children" msgstr "Tag plads fra afledte" #: treemap.cpp:2905 msgid "Top Left" msgstr "For oven til venstre" #: treemap.cpp:2906 msgid "Top Center" msgstr "For oven i midten" #: treemap.cpp:2907 msgid "Top Right" msgstr "For oven til højre" #: treemap.cpp:2909 msgid "Bottom Center" msgstr "For neden i midten" #: treemap.cpp:2910 msgid "Bottom Right" msgstr "For neden til højre" #: treemap.cpp:2987 msgid "No %1 Limit" msgstr "Ingen %1-grænse" #: treemap.cpp:3056 treemap.cpp:3067 #, c-format msgid "" "_n: 1 Pixel\n" "%n Pixels" msgstr "" "1 Pixel\n" "%n Pixels" #: treemap.cpp:3073 msgid "Halve Area Limit (to %1)" msgstr "Halvér områdegrænse (til %1)" #: treemap.cpp:3118 #, c-format msgid "Depth %1" msgstr "Dybde %1" #: treemap.cpp:3122 msgid "Decrement (to %1)" msgstr "Gå ned (til %1)" #: treemap.cpp:3124 msgid "Increment (to %1)" msgstr "Gå op (til %1)" #: configdlgbase.ui:37 #, no-c-format msgid "General" msgstr "Generelt" #: configdlgbase.ui:69 #, no-c-format msgid "Truncated when more/longer than:" msgstr "Trunkeret når mere/længere end:" #: configdlgbase.ui:77 #, no-c-format msgid "Precision of percentage values:" msgstr "Præcision ved procent-værdier:" #: configdlgbase.ui:85 #, no-c-format msgid "Symbols in tooltips and context menus" msgstr "Symboler i værktøjsvink og sammenhængsmenuer" #: configdlgbase.ui:141 #, no-c-format msgid "Maximum number of items in lists:" msgstr "Maksimalt antal punkter på lister:" #: configdlgbase.ui:162 #, no-c-format msgid "Cost Item Colors" msgstr "Farver til omkostningspunkt" #: configdlgbase.ui:254 #, no-c-format msgid "Object:" msgstr "Objekt:" #: configdlgbase.ui:262 #, no-c-format msgid "Class:" msgstr "Klasse:" #: configdlgbase.ui:310 #, no-c-format msgid "File:" msgstr "Fil:" #: configdlgbase.ui:376 #, no-c-format msgid "Annotations" msgstr "Kommentarer" #: configdlgbase.ui:395 #, no-c-format msgid "Context lines in annotations:" msgstr "Sammenhængslinjer i annotationer:" #: configdlgbase.ui:423 #, no-c-format msgid "Source Folders" msgstr "Kildemapper" #: configdlgbase.ui:454 #, no-c-format msgid "Object / Related Source Base" msgstr "Objekt / Relateret kildebasis" #: configdlgbase.ui:483 #, no-c-format msgid "Add..." msgstr "Tilføj..." #: dumpselectionbase.ui:32 #, no-c-format msgid "Target" msgstr "Mål" #: dumpselectionbase.ui:54 #, no-c-format msgid "Time" msgstr "Tid" #: dumpselectionbase.ui:65 #, no-c-format msgid "Path" msgstr "Sti" #: dumpselectionbase.ui:106 #, no-c-format msgid "Target command:" msgstr "Mål-kommando:" #: dumpselectionbase.ui:119 #, no-c-format msgid "Profiler options:" msgstr "Profil-indstillinger:" #: dumpselectionbase.ui:125 #, no-c-format msgid "Option" msgstr "Valg" #: dumpselectionbase.ui:136 dumpselectionbase.ui:688 #, no-c-format msgid "Value" msgstr "Værdi" #: dumpselectionbase.ui:147 #, no-c-format msgid "Trace" msgstr "Spor" #: dumpselectionbase.ui:160 dumpselectionbase.ui:768 #, no-c-format msgid "Jumps" msgstr "Spring" #: dumpselectionbase.ui:174 #, no-c-format msgid "Instructions" msgstr "Instruktioner" #: dumpselectionbase.ui:189 dumpselectionbase.ui:783 #, no-c-format msgid "Events" msgstr "Begivenheder" #: dumpselectionbase.ui:202 #, no-c-format msgid "Full Cache" msgstr "Fuld cache" #: dumpselectionbase.ui:216 #, no-c-format msgid "Custom" msgstr "Indret selv" #: dumpselectionbase.ui:231 #, no-c-format msgid "Collect" msgstr "Indsaml" #: dumpselectionbase.ui:244 #, no-c-format msgid "At Startup" msgstr "Ved opstart" #: dumpselectionbase.ui:258 #, no-c-format msgid "While In" msgstr "Mens i" #: dumpselectionbase.ui:273 #, no-c-format msgid "Skip" msgstr "Skip" #: dumpselectionbase.ui:286 #, no-c-format msgid "PLT" msgstr "PLT" #: dumpselectionbase.ui:315 #, no-c-format msgid "Dump Profile" msgstr "Dump profil" #: dumpselectionbase.ui:328 #, no-c-format msgid "Every BBs" msgstr "Hver BBs" #: dumpselectionbase.ui:342 dumpselectionbase.ui:384 #, no-c-format msgid "On Entering" msgstr "Ved indgang til" #: dumpselectionbase.ui:356 #, no-c-format msgid "On Leaving" msgstr "Ved forlade" #: dumpselectionbase.ui:371 #, no-c-format msgid "Zero Events" msgstr "Nul-begivenheder" #: dumpselectionbase.ui:399 #, no-c-format msgid "Separate" msgstr "Separat" #: dumpselectionbase.ui:412 #, no-c-format msgid "Threads" msgstr "Tråde" #: dumpselectionbase.ui:426 #, no-c-format msgid "Recursions" msgstr "Rekursioner" #: dumpselectionbase.ui:440 #, no-c-format msgid "Call Chain" msgstr "Kalde-kæde" #: dumpselectionbase.ui:470 #, no-c-format msgid "Custom profiler options:" msgstr "Brugervalgte profil-indstillinger:" #: dumpselectionbase.ui:508 #, no-c-format msgid "Run New Profile" msgstr "Kør ny profil" #: dumpselectionbase.ui:520 #, no-c-format msgid "Info" msgstr "Info" #: dumpselectionbase.ui:531 #, no-c-format msgid "Dump reason:" msgstr "Dump-grund:" #: dumpselectionbase.ui:544 #, no-c-format msgid "Event summary:" msgstr "Begivenheds sammendrag:" #: dumpselectionbase.ui:561 #, no-c-format msgid "Sum" msgstr "Sum" #: dumpselectionbase.ui:579 #, no-c-format msgid "Miscellaneous:" msgstr "Diverse:" #: dumpselectionbase.ui:617 #, no-c-format msgid "Show" msgstr "Vis" #: dumpselectionbase.ui:625 #, no-c-format msgid "Compare" msgstr "Sammenlign" #: dumpselectionbase.ui:637 #, no-c-format msgid "State" msgstr "Tilstand" #: dumpselectionbase.ui:656 #, no-c-format msgid "Update" msgstr "Opdatér" #: dumpselectionbase.ui:664 #, no-c-format msgid "Every [s]:" msgstr "Hver [s]:" #: dumpselectionbase.ui:677 #, no-c-format msgid "Counter" msgstr "Tæller" #: dumpselectionbase.ui:699 #, no-c-format msgid "Dumps Done" msgstr "Dump færdig" #: dumpselectionbase.ui:713 #, no-c-format msgid "Is Collecting" msgstr "Samler" #: dumpselectionbase.ui:727 #, no-c-format msgid "Executed" msgstr "Kørt" #: dumpselectionbase.ui:740 #, no-c-format msgid "Basic Blocks" msgstr "Basale blokke" #: dumpselectionbase.ui:796 #, no-c-format msgid "Ir" msgstr "Ir" #: dumpselectionbase.ui:811 #, no-c-format msgid "Distinct" msgstr "Forskellige" #: dumpselectionbase.ui:838 #, no-c-format msgid "Functions" msgstr "Funktioner" #: dumpselectionbase.ui:852 #, no-c-format msgid "Contexts" msgstr "Sammenhænge" #: dumpselectionbase.ui:890 #, no-c-format msgid "Stack trace:" msgstr "Stak-spor:" #: dumpselectionbase.ui:898 #, no-c-format msgid "Sync." msgstr "Sync." #: dumpselectionbase.ui:976 #, no-c-format msgid "Start" msgstr "Start" #: dumpselectionbase.ui:1001 #, no-c-format msgid "Zero" msgstr "Zero" #: dumpselectionbase.ui:1009 #, no-c-format msgid "Dump" msgstr "Dump" #: dumpselectionbase.ui:1021 #, no-c-format msgid "Messages" msgstr "Beskeder" #: dumpselectionbase.ui:1045 #, no-c-format msgid "Kill Run" msgstr "Dræb kørsel" #: functionselectionbase.ui:41 #, no-c-format msgid "&Search:" msgstr "&Søg:" #: functionselectionbase.ui:73 #, no-c-format msgid "Group" msgstr "Gruppe" #: partselectionbase.ui:60 #, no-c-format msgid "(no trace parts)" msgstr "(ingen spor-parter)" #: stackselectionbase.ui:16 #, no-c-format msgid "Stack Selection" msgstr "Stak-valg" #: stackselectionbase.ui:42 #, no-c-format msgid "Cost2" msgstr "Omkostning 2" #: tdecachegrindui.rc:15 #, no-c-format msgid "&Layout" msgstr "&Layout" #: tdecachegrindui.rc:32 #, no-c-format msgid "Sidebars" msgstr "Sidebjælker" #: tdecachegrindui.rc:54 #, no-c-format msgid "State Toolbar" msgstr "Tilstandsværktøjslinje" #: tips:3 msgid "" "

      ...that the What's This? help for every GUI widget\n" "in KCachegrind contains detailed usage information for this widget?\n" "It is highly recommended to read at least these help texts on first\n" "use. Request What's This? help by pressing\n" "Shift+F1 and clicking on the widget.

      \n" msgstr "" "

      ...at Hvad er dette?-hjælpen for hver GUI-kontrol\n" "i KCachegrind indeholder detaljeret brugsinformation for kontrollen?\n" "Det anbefales stærkt at læse i det mindste disse hjælpetekster ved første\n" "brug. Bed om Hvad er dette?-hjælp ved at trykke på\n" "Shift-F1 og klikke på kontrollen.

      \n" #: tips:13 msgid "" "

      ...that you can get profile information at instruction level\n" "with Calltree when you provide the option --dump-instr=yes?\n" "Use the Assembler View for the instruction annotations.\n" "

      \n" msgstr "" "

      ...at du kan få profilinformation på instruktionsniveau\n" "med Calltree når du bruger flaget --dump-instr=yes?\n" "Brug Assembler-visningen for instruktionsannotationer.\n" "

      \n" #: tips:22 msgid "" "

      ...that you can use Alt-Left/Right keys of your keyboard to go\n" "back/forward in the active object history ?

      \n" msgstr "" "

      ...at du kan bruge Alt-Venstre/Højre-taster på dit tastatur til at\n" "gå tilbage/fremad i den aktive objekt-historikken ?

      \n" #: tips:29 msgid "" "

      ...that you can navigate in the Callee/Caller Map View using\n" "arrow keys? Use Left/Right to change to siblings of the current\n" "item; use Up/Down to go one nesting level up/down. To select\n" "the current item, press Space, and to activate it, press Return.\n" "

      \n" msgstr "" "

      ...at du kan navigere i Kaldte/Kalder-kortvisningen ved brug af\n" "piletaster? Brug venstre/højre til sidelæns bevægelser;\n" "brug op/ned til at et indlejringsniveau op eller ned. For at vælge\n" "dette punkt trykkes på mellemrumstasten og for at \n" "aktivere det Return.\n" "

      \n" #: tips:39 msgid "" "

      ...that you can navigate in the Call Graph View using\n" "arrow keys? Use Up/Down to go one calling level up/down, alternating\n" "between calls and functions. Use Left/Right to change to siblings of a " "current\n" "selected call. To activate the current item, press Return.\n" "

      \n" msgstr "" "

      ...at du kan navigere i Kaldegraf-visningen ved brug af\n" "piletaster? Brug op/ned for at gå et kaldeniveau op/ned,\n" "alternerende mellem kald og funktioner. Brug venstre/højre\n" "til sidelæns ændringer fra det valgte kald. For at gøre dette\n" "punkt til det valgte trykkes på Return.\n" "

      \n" #: tips:49 msgid "" "

      ...that you can rapidly locate a function by entering part of its\n" "name (case-insensitive) into the edit line of the toolbar\n" "and hit return?

      \n" msgstr "" "

      ...at du kan finde en funktion hurtigt ved at indtaste en del\n" "af dens navn (ikke versalfølsomt) i redigeringslinjen på\n" "værktøjslinjen og trykke på Enter?

      \n" #: tips:57 msgid "" "

      ...that you can assign custom colors to \n" "ELF objects/C++ Classes/Source Files for graph coloring\n" "in Settings->Configure KCachegrind...?

      \n" msgstr "" "

      ...at du kan tilknytte selvvalgte farver til \n" "ELF-objekter/C++ klasser/Kildefiler for graf-kolorering\n" "i Opsætning->Indstil KCachegrind...?

      \n" #: tips:65 msgid "" "

      ...that you can see if debug info is available for a selected \n" "function by looking at the location label in the Info tab or\n" "the source listing header in the source tab?

      \n" "

      There must be the name of the source file (with extension).\n" "If KCachegrind still doesn't show the source, make sure that you\n" "have added the directory of the source file to the\n" "Source Directories list in the configuration.\n" msgstr "" "

      ...at du kan se om der er fejlretningsinfo tilstede for en valgt \n" "funktion ved at kigge på stedetiketten i Info-fanebladet eller\n" "kildelistningsoverskriften i kildefanebladet?

      \n" "

      Navnet på kildefilen (med endelse) skal være der.\n" "Hvis KCachegrind stadig ikke viser kilden, så sørg for at du\n" "har tilføjet kataloget for kildefilen til\n" "Kildekataloger-listen i indstillingen.\n" #: tips:77 msgid "" "

      ...that you can configure whether KCachgrind should\n" "show absolute event counts or relative ones (percentage display)?

      \n" msgstr "" "

      ...at du kan indstille om KCachgrind skal vise\n" "absolutte begivenhedstællere eller relative (procent-visning)?

      \n" #: tips:84 msgid "" "

      ...that you can configure the maximum number of items\n" "for all function lists in KCachegrind? Limiting the number\n" "of items is done to get a fast reacting GUI. The last item in\n" "the list will show you the number of skipped functions, together\n" "with a cost condition for these skipped functions.

      \n" "

      To activate a function with small costs, search for it and select\n" "it in the flat profile. Selecting functions with small cost will\n" "temporarily add them to the flat profile list.

      \n" msgstr "" "

      ...at du kan indstille det maksimale antal punkter\n" "for alle funktionslister i KCachegrind? Begrænsning af antallet\n" "af punkter gøres for at få et hurtigt reagerende GUI. Det sidste punkt\n" "på listen vil vise dig antallet af oversprungne funktioner, sammen\n" "med en omkostningsbetingelse for disse oversprungne funktioner.

      \n" "

      For at aktivere en funktion med lille omkostning, søges efter den og den\n" "vælges i den flade profil. Valg af funktioner med lille omkostning vil\n" "midlertidigt tilføje dem til den flade profilliste.

      \n" #: tips:97 msgid "" "

      ...that the Coverage tab - in contrast to the Call Lists tab -\n" "shows all functions that are calling the selected function\n" "(upper part) / are called by the selected function (bottom part),\n" "no matter how many function are between them on the stack?

      \n" "

      Examples:

      \n" "

      An entry in the upper list for function foo1() with a value of 50%\n" "with function bar() selected means that 50% of all the cost of function\n" "bar() happened while called from function foo1().

      \n" "

      An entry in the bottom list for function foo2() with a value of 50%\n" "with function bar() selected means that 50% of all the cost of function\n" "bar() happened while calling foo2() from bar().

      \n" msgstr "" "

      ...at dækningsfanebladet - i modsætning til kaldliste-fanebladet -\n" "viser alle funktioner der kalder den valgte funktion\n" "(øvre del) / bliver kaldet af den valgte funktion (nedre del),\n" "ligegyldigt hvor mange funktioner der er mellem dem på stakken?

      \n" "

      Eksempler:

      \n" "

      En indgang i den øvre liste for funktion foo1() med en værdi på 50%\n" "med funktion bar() valgt betyder at 50% af alle omkostninger for funktionen\n" "bar() skete mens den blev kaldet fra funktion foo1().

      \n" "

      En indgang i den nederste liste for funktion foo2() med en værdi på 50%\n" "med funktion bar() valgt betyder at 50% af alle omkostninger af funktionen\n" "bar() skete mens foo2() blev kaldet fra bar().

      \n" #: tips:113 msgid "" "

      ...that waiting for the tool tip inside of a tree map\n" "shows the list of names of the nested rectangles the mouse\n" "pointer is over?

      \n" "

      Items from this list can be selected by pressing the right\n" "mouse button.

      \n" msgstr "" "

      ...at hvis man venter på værktøjsvink indeni et trækort\n" "så vil listen af navne på de indlejrede rektangler muse-\n" "markøren er over vises?

      \n" "

      Punkter fra denne liste kan vælges ved at trykke på\n" "højre museknap.

      \n" #: tips:123 msgid "" "

      ...that you can constrain the cost counts shown to only a\n" "few parts of the whole trace by selecting these parts in the\n" "\"Trace Selection\" Dockable?

      \n" "

      To generate multiple parts in a profiling run with\n" "cachegrind, use e.g. option --cachedumps=xxx for parts\n" "of a length of xxx basic blocks (A basic block is a run\n" "of not-branching assembler statements inside of your program\n" "code).

      \n" msgstr "" "

      ...at du kan begrænse de omkostningstællere der vises til kun\n" "nogle få parter af hele sporet ved at vælge disse dele i\n" "\"Spor-valg\" dokbar?

      \n" "

      For at generer flere parter i en profileringskørsel med\n" "cachegrind, bruges f.eks. flaget --cachedumps=xxx for parter\n" "af længde på xxx basale blokke (En basal blok er en kørsel\n" "af ikke-forgrenede assembler-udsagn indeni din program-\n" "kode).

      \n" #, fuzzy #~ msgid "Top" #~ msgstr "TopVenstre" #, fuzzy #~ msgid "Right" #~ msgstr "TopHøjre" #, fuzzy #~ msgid "Bottom" #~ msgstr "NedeVenstre" #, fuzzy #~ msgid "Horizontal" #~ msgstr "Opdel vandret" #, fuzzy #~ msgid "Border" #~ msgstr "Kant 0" #, fuzzy #~ msgid "Configuration" #~ msgstr "KCachegrind indstilling" #, fuzzy #~ msgid "Options" #~ msgstr "Valg" #, fuzzy #~ msgid "&File" #~ msgstr "Fil:" #, fuzzy #~ msgid "Main Toolbar" #~ msgstr "Tilstandsværktøjslinje" #~ msgid "(unnamed)" #~ msgstr "(unavngiven)" #~ msgid "Function Query" #~ msgstr "Funktionsforespørgsel" #~ msgid "" #~ "Type part of a function name (insensitive) to get a list of matching " #~ "functions from current function group" #~ msgstr "" #~ "Skriv en del af et funktionsnavn (ikke versalfølsomt) for at få en liste " #~ "af matchende funktioner fra denne funktionsgruppe"
      OmkostningstypeAfledt fra omkostning
      Funktion kumulativTotal
      Funktion selvFunktion gruppe (*) / Total
      KaldFunktion " "kumulativ
      KildelinjeFunktion kumulativ