# Danish translation of kxsldbg
# Copyright (C).
#
# Erik Kjær Pedersen <erik@binghamton.edu>, 2003, 2004, 2007.
# Rune Rønde Laursen <runerl@skjoldhoej.dk>, 2004, 2005.
msgid ""
msgstr ""
"Project-Id-Version: kxsldbg\n"
"POT-Creation-Date: 2021-07-07 18:24+0000\n"
"PO-Revision-Date: 2007-06-27 14:04-0400\n"
"Last-Translator: Erik Kjær Pedersen <erik@binghamton.edu>\n"
"Language-Team: Danish <dansk@klid.dk>\n"
"Language: da\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"
"Plural-Forms: \n"
"Plural-Forms: \n"

#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Erik Kjær Pedersen,Rune Rønde Laursen"

#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "erik@binghamton.edu,runerl@skjoldhoej.dk"

#: kxsldbg.cpp:67
msgid "&XSLDbg Handbook"
msgstr ""

#: kxsldbg.cpp:76
msgid "Could not find our part."
msgstr "Kunne ikke finde vores part."

#: kxsldbg.cpp:176
msgid "File: %1  Line: %2  Col: %3"
msgstr "Fil: %1  Linje: %2  Søjle: %3"

#: kxsldbgpart/kxsldbg_part.cpp:87 kxsldbgpart/kxsldbg_part.cpp:634
#: kxsldbgpart/kxsldbg_part.cpp:636
msgid "Goto XPath"
msgstr "Gå til XPath"

#: kxsldbgpart/kxsldbg_part.cpp:95 kxsldbgpart/xsldbgglobalvariables.ui:185
#: kxsldbgpart/xsldbglocalvariables.ui:122
#, no-c-format
msgid "Evaluate"
msgstr "Evaluér"

#: kxsldbgpart/kxsldbg_part.cpp:109
msgid "Configure Editor..."
msgstr "Indstil editor..."

#: kxsldbgpart/kxsldbg_part.cpp:113
msgid "Configure..."
msgstr "Indstil..."

#: kxsldbgpart/kxsldbg_part.cpp:118
msgid "Inspect..."
msgstr "Undersøg..."

#: kxsldbgpart/kxsldbg_part.cpp:125
msgid "Run"
msgstr "Kør"

#: kxsldbgpart/kxsldbg_part.cpp:135
msgid "Step"
msgstr "Trin"

#: kxsldbgpart/kxsldbg_part.cpp:140 kxsldbgpart/xsldbgconfig.ui:261
#, no-c-format
msgid "Next"
msgstr "Næste"

#: kxsldbgpart/kxsldbg_part.cpp:145
msgid "Step Up"
msgstr "Trin op"

#: kxsldbgpart/kxsldbg_part.cpp:150
msgid "Step Down"
msgstr "Trin ned"

#: kxsldbgpart/kxsldbg_part.cpp:156
msgid "Break"
msgstr "Bryd"

#: kxsldbgpart/kxsldbg_part.cpp:161
msgid "Enable/Disable"
msgstr "Aktivér/Deaktivér"

#: kxsldbgpart/kxsldbg_part.cpp:171
msgid "&Source"
msgstr "&Kilde"

#: kxsldbgpart/kxsldbg_part.cpp:176
msgid "&Data"
msgstr "&Data"

#: kxsldbgpart/kxsldbg_part.cpp:181
msgid "&Output"
msgstr "&Uddata"

#: kxsldbgpart/kxsldbg_part.cpp:186
msgid "Reload Current File From Disk"
msgstr "Genindlæs denne fil fra disk"

#: kxsldbgpart/kxsldbg_part.cpp:192
msgid "Walk Through Stylesheet..."
msgstr "Gå gennem stilark..."

#: kxsldbgpart/kxsldbg_part.cpp:196
msgid "Stop Wal&king Through Stylesheet"
msgstr "Hold op med at &gå gennem stilark"

#: kxsldbgpart/kxsldbg_part.cpp:200
msgid "Tr&ace Execution of Stylesheet"
msgstr "S&por udførsel af stilark"

#: kxsldbgpart/kxsldbg_part.cpp:204
msgid "Stop Tracing of Stylesheet"
msgstr "Hold op med at spore udførsel af stilark"

#: kxsldbgpart/kxsldbg_part.cpp:209
msgid "&Evaluate Expression..."
msgstr "&Evaluér udtryk..."

#: kxsldbgpart/kxsldbg_part.cpp:214
msgid "Goto &XPath..."
msgstr "Gå til &XPath..."

#: kxsldbgpart/kxsldbg_part.cpp:219
msgid "Lookup SystemID..."
msgstr "Slå systemID op..."

#: kxsldbgpart/kxsldbg_part.cpp:224
msgid "Lookup PublicID..."
msgstr "Slå PulicID op..."

#: kxsldbgpart/kxsldbg_part.cpp:277
msgid "KXsldbgPart"
msgstr "KXsldbgPart"

#: kxsldbgpart/kxsldbg_part.cpp:358
msgid "Debugger Not Ready"
msgstr "Fejlsøger ikke parat"

#: kxsldbgpart/kxsldbg_part.cpp:359
msgid "Configure and start the debugger first."
msgstr "Indstil og start fejlsøgeren først."

#: kxsldbgpart/kxsldbg_part.cpp:376 kxsldbgpart/kxsldbg_part.cpp:382
msgid "Lookup SystemID"
msgstr "Slå systemID op"

#: kxsldbgpart/kxsldbg_part.cpp:377 kxsldbgpart/kxsldbg_part.cpp:383
msgid "Please enter SystemID to find:"
msgstr "Indtast venligst SystemID der skal findes:"

#: kxsldbgpart/kxsldbg_part.cpp:408 kxsldbgpart/kxsldbg_part.cpp:413
msgid "Lookup PublicID"
msgstr "Slå PublicID op"

#: kxsldbgpart/kxsldbg_part.cpp:409 kxsldbgpart/kxsldbg_part.cpp:414
msgid "Please enter PublicID to find:"
msgstr "Indtast venligst PublicID der skal findes:"

#: kxsldbgpart/kxsldbg_part.cpp:622 kxsldbgpart/kxsldbg_part.cpp:624
msgid "Evalute Expression"
msgstr "Evaluér udtryk"

#: kxsldbgpart/kxsldbg_part.cpp:622 kxsldbgpart/kxsldbg_part.cpp:624
#: kxsldbgpart/kxsldbg_part.cpp:634 kxsldbgpart/kxsldbg_part.cpp:636
msgid "XPath:"
msgstr "XPath:"

#: kxsldbgpart/kxsldbg_part.cpp:738 kxsldbgpart/libxsldbg/xsldbg.cpp:591
msgid "Error: Too many file names supplied via command line.\n"
msgstr "Fejl: For mange filnavne givet på kommandolinjen.\n"

#: kxsldbgpart/kxsldbg_part.cpp:802
msgid "SystemID or PublicID Resolution Result"
msgstr "Resultat af SystemID eller PublicID resolution"

#: kxsldbgpart/kxsldbg_part.cpp:803
#, c-format
msgid ""
"SystemID or PublicID has been resolved to\n"
".%1"
msgstr ""
"SystemID eller PublicID er blevet resolveret til\n"
".%1"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:623
msgid "disabled"
msgstr "deaktiveret"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:624
msgid "enabled"
msgstr "aktiveret"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:643
msgid ""
"Breakpoint %1 %2 for template: \"%3\" mode: \"%4\" in file \"%5\" at line %6"
msgstr ""
"Stoppunkt %1 %2 til skabelon: \"%3\" -tilstand: \"%4\" i filen \"%5\" på "
"linje %6"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:645
msgid "Breakpoint %1 %2 for template: \"%3\" mode: \"%4\""
msgstr "Stoppunkt %1 %2 til skabelon: \"%3\" -tilstand \"%4\""

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:94
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:345
msgid "Failed to add breakpoint."
msgstr "Kunne ikke tilføje stoppunkt."

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:97
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:352
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:800
#: kxsldbgpart/libxsldbg/debugXSL.cpp:510
msgid "Error: Debugger has no files loaded. Try reloading files.\n"
msgstr "Fejl: Fejlsøger har ingen filer indlæst. Genindlæs filerne.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:113
msgid "Error: Unable to parse %1 as a number of frames.\n"
msgstr "Fejl: Kunne ikke tolke %1 som et antal rammer.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:151
msgid "Error: Stylesheet is not valid or file is not loaded.\n"
msgstr "Fejl: Stilark ikke gyldigt eller filen er ikke indlæst.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:191
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:215
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:302
msgid ""
"Warning: Breakpoint for file \"%1\" at line %2 does not seem to be valid.\n"
msgstr ""
"Advarsel: Stoppunkt for fil \"%1\" på linje %2 ser ud til at være ugyldig.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:213
msgid "Error: Unable to find a stylesheet file whose name contains %1.\n"
msgstr "Fejl: Kunne ikke finde et stilark hvis navn indeholder %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:223
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:318
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:1031
#: kxsldbgpart/libxsldbg/debugXSL.cpp:679
#: kxsldbgpart/libxsldbg/debugXSL.cpp:713
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1237
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1340 kxsldbgpart/libxsldbg/files.cpp:1353
#: kxsldbgpart/libxsldbg/files_unix.cpp:61
#: kxsldbgpart/libxsldbg/files_unix.cpp:153
#: kxsldbgpart/libxsldbg/search.cpp:113 kxsldbgpart/libxsldbg/search.cpp:1198
#: kxsldbgpart/libxsldbg/search.cpp:1261 kxsldbgpart/libxsldbg/search.cpp:1322
#: kxsldbgpart/libxsldbg/search.cpp:1374 kxsldbgpart/libxsldbg/search.cpp:1422
#: kxsldbgpart/libxsldbg/search.cpp:1476 kxsldbgpart/libxsldbg/search.cpp:1522
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:105
#: kxsldbgpart/libxsldbg/xsldbg.cpp:512 kxsldbgpart/libxsldbg/xsldbg.cpp:1069
msgid "Error: Out of memory.\n"
msgstr "Fejl: Ikke mere hukommelse.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:249
msgid "Error: Data file is invalid. Try the run command first.\n"
msgstr "Fejl: Datafil er ugyldig. Forsøg med kør-kommandoen først.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:304
msgid "Error: Unable to find a data file whose name contains %1.\n"
msgstr "Fejl: Kunne ikke finde datafilen hvis navn indeholder %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:375
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:695
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:821
#: kxsldbgpart/libxsldbg/param_cmds.cpp:107
msgid "Error: Unable to parse %1 as a line number.\n"
msgstr "Fejl: Kunne ikke tolke %1 som et linjenummer.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:419
msgid "Error: Unable to find the added breakpoint."
msgstr "Fejl: Kunne ikke finde det tilføjede stoppunkt."

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:425
#: kxsldbgpart/libxsldbg/search.cpp:491 kxsldbgpart/libxsldbg/trace_cmds.cpp:68
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:111
msgid "Error: Invalid arguments to command %1.\n"
msgstr "Fejl: Ugyldigt argument til kommandoen %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:527
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:722
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:848
msgid "Error: Invalid arguments for command %1.\n"
msgstr "Fejl: Ugyldige argumenter til kommandoen %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:596
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:952
msgid ""
"Information: Breakpoint validation has caused breakpoint %1 to be re-"
"created.\n"
msgstr ""
"Information: Stoppunktsvalidering har medført at stoppunktet %1 er blevet "
"genoprettet.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:603
msgid "Warning: Breakpoint exits for file \"%1\" at line %2.\n"
msgstr "Advarsel: Stoppunkt afslutter for filen \"%1\" på linje %2.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:626
msgid "Error: No templates found or unable to add breakpoint.\n"
msgstr "Fejl: Ingen skabeloner fundet eller kunne ikke tilføje stoppunkt.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:631
#, c-format
msgid ""
"_n: Information: Added %n new breakpoint.\n"
"Information: Added %n new breakpoints."
msgstr ""
"Information: %n nyt stoppunkt tilføjet.\n"
"Information: %n nye stoppunkter tilføjet."

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:651
msgid "Error: Failed to add breakpoint for file \"%1\" at line %2.\n"
msgstr "Fejl: Kunne ikke tilføje stoppunkt for filen \"%1\" på linje %2.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:653
msgid "Error: Failed to add breakpoint.\n"
msgstr "Fejl: Kunne ikke tilføje stoppunkt.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:677
msgid "Failed to delete breakpoint."
msgstr "Kunne ikke slette stoppunkt."

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:714
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:842
msgid "Error: Breakpoint does not exist for file \"%1\" at line %2.\n"
msgstr "Fejl: Stoppunkt eksisterer ikke for filen \"%1\" på linje %2.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:735
msgid "Error: Unable to delete breakpoint %1.\n"
msgstr "Fejl: Kunne ikke fjerne stoppunkt %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:738
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:864
msgid "Error: Breakpoint %1 does not exist.\n"
msgstr "Fejl: Stoppunkt %1 eksisterer ikke.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:745
msgid "Error: Unable to delete breakpoint at template %1.\n"
msgstr "Fejl: Kunne ikke fjerne stoppunkt ved skabelonen %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:748
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:871
msgid "Error: Breakpoint at template \"%1\" does not exist.\n"
msgstr "Fejl: Stoppunkt ved skabelon \"%1\" eksisterer ikke.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:797
msgid "Failed to enable/disable breakpoint."
msgstr "Kunne ikke aktivere/deaktivere stoppunkt."

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:861
msgid "Error: Unable to enable/disable breakpoint %1.\n"
msgstr "Fejl: Kunne ikke aktivere/deaktivere stoppunkt %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:956
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:995
msgid "Warning: Validation of breakpoint %1 failed.\n"
msgstr "Advarsel: Validering af stoppunkt %1 mislykkedes.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:984
msgid ""
"Information: Breakpoint validation has caused one or more breakpoints to be "
"re-created.\n"
msgstr ""
"Information: Stoppunktsvalidering har medført at et eller flere stoppunkter "
"er blevet genoprettet.\n"

#: kxsldbgpart/libxsldbg/debug.cpp:135
msgid "Error: XSLT source and XML data are empty. Cannot enter the debugger.\n"
msgstr "Fejl: XSLT-kilde og XML-data er tom. Kan ikke starte fejlsøgning.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:532
msgid "Error: The XSLT template named \"%1\" was not found.\n"
msgstr "Fejl: XSLT-skabelonen ved navn \"%1\" blev ikke fundet.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:535
msgid " template: \"%1\"\n"
msgstr " skabelon: \"%1\"\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:560
#: kxsldbgpart/libxsldbg/debugXSL.cpp:566
msgid "Error: Unable to cd. No stylesheet loaded.\n"
msgstr "Fejl: Kunne ikke skifte katalog. Intet stilark indlæst.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:563
msgid "Error: Unknown arguments to the command %1.\n"
msgstr "Fejl: Ukendte argumenter til kommandoen %1.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:585
msgid "Error: Invalid arguments to the command %1.\n"
msgstr "Fejl: Ugyldige argumenter til kommandoen %1.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:606
msgid ""
"_n: Warning: XPath %1 is a Node Set with %n child.\n"
"Warning: XPath %1 is a Node Set with %n children."
msgstr ""
"Advarsel Xpath %1 er en knudeopsætning sat med %n barneknude.\n"
"Advarsel Xpath %1 er en knudeopsætning sat med %n barneknuder."

#: kxsldbgpart/libxsldbg/debugXSL.cpp:608
msgid "Warning: XPath %1 is an empty Node Set.\n"
msgstr "Advarsel: XPath %1 er en tom knudeopsætning.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:617
msgid "Error: XPath %1 was not found.\n"
msgstr "Fejl: XPath %1 blev ikke fundet.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:672
#: kxsldbgpart/libxsldbg/debugXSL.cpp:675
#: kxsldbgpart/libxsldbg/debugXSL.cpp:706
msgid "#%1 template: \"%2\" mode: \"%3\""
msgstr "#%1 skabelon: \"%2\" format: \"%3\""

#: kxsldbgpart/libxsldbg/debugXSL.cpp:677
#: kxsldbgpart/libxsldbg/debugXSL.cpp:694
#: kxsldbgpart/libxsldbg/debugXSL.cpp:709
#: kxsldbgpart/libxsldbg/debugXSL.cpp:762
msgid " in file \"%1\" at line %2\n"
msgstr " i fil \"%1\" på linje %2\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:692
msgid "#%1 template: \"LIBXSLT_DEFAULT\" mode: \"\""
msgstr "#%1 skabelon: \"LIBXSLT_DEFAULT\" format: \"\""

#: kxsldbgpart/libxsldbg/debugXSL.cpp:735
msgid "\tNo items in call stack.\n"
msgstr "\tIngen elementer i kaldestakken.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:758
msgid "#%1 template: \"%2\""
msgstr "#%1 skabelon: \"%2\""

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1025
msgid "Information: Updating search database. This may take a while...\n"
msgstr "Information: Opdaterer søgedatabasen. Dette kan tage lidt tid...\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1028
msgid "Information: Looking for breakpoints.\n"
msgstr "Information: Søger efter stoppunkter.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1030
msgid "Information: Looking for imports and top-level stylesheets.\n"
msgstr "Information: Søger efter imports og top-niveau stilark.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1032
msgid "Information: Looking for xsl:includes.\n"
msgstr "Information: Søger efter xsl:inkluderingsfiler.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1034
msgid "Information: Looking for templates.\n"
msgstr "Information: Søger efter skabeloner.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1036
msgid "Information: Looking for global variables.\n"
msgstr "Information: Søger efter globale variable.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1038
msgid "Information: Looking for local variables.\n"
msgstr "Information: Søger efter lokale variable.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1040
msgid "Information: Formatting output.\n"
msgstr "Information: Formateringsuddata.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1108
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1118
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1136
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1138
msgid ""
"\n"
"Reached template: \"%1\" mode: \"%2\"\n"
msgstr ""
"\n"
"Nåede skabelon: \"%1\" format: \"%2\"\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1295
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2091
msgid "Breakpoint for file \"%1\" at line %2.\n"
msgstr "Stoppunkt for fil \"%1\" på linje %2.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1297
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2093
msgid "Breakpoint at text node in file \"%1\".\n"
msgstr "Stoppunkt ved tekstknude i fil \"%1\".\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1460
msgid ""
"Unable to print local help. Online help can be found at http://xsldbg."
"sourceforge.net/docs/index.html.\n"
msgstr ""
"Kunne ikke udskrive lokal hjælp. lokal hjælp På nettet kan hjælp findes "
"påhttp://xsldbg.sourceforge.net/docs/index.html.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1613
msgid ""
"\n"
"No breakpoints are set for the file.\n"
msgstr ""
"\n"
"Ingen stoppunkter er sat i filen.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1615
#, c-format
msgid ""
"_n: \tTotal of %n breakpoint present.\n"
"\tTotal of %n breakpoints present."
msgstr ""
"\tI alt %n stoppunkt tilstede.\n"
"\tI alt %n stoppunkter tilstede."

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1634
msgid "Error: Unable to delete breakpoint.\n"
msgstr "Fejl: Kunne ikke fjerne stoppunkt.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1656
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1676
msgid "Error: Unable to enable/disable breakpoint.\n"
msgstr "Fejl: Kunne ikke aktivere/deaktivere stoppunkt.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1709
msgid " in file \"%1\" at line %2"
msgstr "i fil \"%1\" på linje %2"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1717
msgid "Error: Unable to print working directory.\n"
msgstr "Fejl: Kunne ikke udskrive arbejdskatalog.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1737
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1759
msgid "Error: Need to use the run command first.\n"
msgstr "Fejl: Kommandoen skal køres først.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1794
msgid "Load of source deferred. Use the run command.\n"
msgstr "Indlæsning af kildekode udsat. Benyt kør-kommandoen.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1834
msgid "Load of data file deferred. Use the run command.\n"
msgstr "Indlæsning af datafilen udsat. Benyt kør-kommandoen.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1888
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1901
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2061
#: kxsldbgpart/libxsldbg/file_cmds.cpp:248
#: kxsldbgpart/libxsldbg/file_cmds.cpp:265
#: kxsldbgpart/libxsldbg/param_cmds.cpp:52
#: kxsldbgpart/libxsldbg/param_cmds.cpp:71
#: kxsldbgpart/libxsldbg/param_cmds.cpp:101
#: kxsldbgpart/libxsldbg/param_cmds.cpp:115
msgid "Error: Invalid arguments for the command %1.\n"
msgstr "Fejl: Ugyldige argumenter til kommandoen %1.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1911
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1932
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1940
msgid "Warning: The %1 command is disabled.\n"
msgstr "Advarsel: %1 -kommandoen er deaktiveret.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1996
msgid "Opening terminal %1.\n"
msgstr "Åbner terminal %1.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:2012
#: kxsldbgpart/libxsldbg/file_cmds.cpp:213
#: kxsldbgpart/libxsldbg/file_cmds.cpp:269
#: kxsldbgpart/libxsldbg/option_cmds.cpp:113
#: kxsldbgpart/libxsldbg/option_cmds.cpp:116
#: kxsldbgpart/libxsldbg/os_cmds.cpp:48
msgid "Error: Missing arguments for the command %1.\n"
msgstr "Fejl: Manglende argumenter til kommandoen %1.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:2016
msgid "Warning: The %1 command is disabled\n"
msgstr "Advarsel: %1 -kommandoen er deaktiveret\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:2080
msgid "Error: Unknown command %1. Try help.\n"
msgstr "Fejl: Ukendt kommando %1. Tryk på hjælp.\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:71
msgid "Entity %1 "
msgstr "Objekt %1 "

#: kxsldbgpart/libxsldbg/file_cmds.cpp:78
msgid "No external General Parsed entities present.\n"
msgstr "Ingen eksterne Generelt Parsed entiteter tilstedet.\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:80
#, c-format
msgid ""
"_n: \tTotal of %n entity found.\n"
"\tTotal of %n entities found."
msgstr ""
"\tI alt %n objekt fundet.\n"
"\tI alt %n objekter fundet."

#: kxsldbgpart/libxsldbg/file_cmds.cpp:121
#: kxsldbgpart/libxsldbg/file_cmds.cpp:129
msgid "SystemID \"%1\" was not found in current catalog.\n"
msgstr "SystemID \"%1\" blev ikke fundet i dette katalog.\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:125
msgid "SystemID \"%1\" maps to: \"%2\"\n"
msgstr "SystemID \"%1\" svarer til: \"%2\"\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:168
#: kxsldbgpart/libxsldbg/file_cmds.cpp:176
msgid "PublicID \"%1\" was not found in current catalog.\n"
msgstr "PublicID \"%1\" blev ikke fundet i dette katalog.\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:172
msgid "PublicID \"%1\" maps to: \"%2\"\n"
msgstr "PublicID \"%1\" svarer til: \"%2\"\n"

#: kxsldbgpart/libxsldbg/files.cpp:192 kxsldbgpart/libxsldbg/files.cpp:215
msgid "Error: Unable to open terminal %1.\n"
msgstr "Fejl: Kunne ikke åbne terminal %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:195
msgid "Error: Did not previously open terminal.\n"
msgstr "Fejl: Har ikke åbnet terminal før.\n"

#: kxsldbgpart/libxsldbg/files.cpp:497
msgid "Error: The file name \"%1\" is too long.\n"
msgstr "Fejl: Filnavnet \"%1\" er for langt.\n"

#: kxsldbgpart/libxsldbg/files.cpp:521
msgid "Error: Unable to change to directory %1.\n"
msgstr "Fejl: Kunne ikke skifte katalog %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:524
msgid "Changed to directory %1.\n"
msgstr "Skiftede til katalog %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:552
msgid "Setting XML Data file name to %1.\n"
msgstr "Sætter XML-datafilnavn til %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:564
msgid "Setting stylesheet file name to %1.\n"
msgstr "Sætter stilarkfilnavn til %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:581
msgid "Setting stylesheet base path to %1.\n"
msgstr "Sætter stilark-basissti til %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:598
msgid "Missing file name.\n"
msgstr "Manglende filnavn.\n"

#: kxsldbgpart/libxsldbg/files.cpp:1108 kxsldbgpart/libxsldbg/files.cpp:1143
msgid "Encoding of text failed.\n"
msgstr "Tegnsætindkodning mislykkedes.\n"

#: kxsldbgpart/libxsldbg/files.cpp:1179
#, c-format
msgid "Unable to initialize encoding %1."
msgstr "Kunne ikke initialisere tegnsætindkodning %1."

#: kxsldbgpart/libxsldbg/files.cpp:1184
msgid "Invalid encoding %1.\n"
msgstr "Ugyldig tegnsætindkodning %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:1245
msgid " ----- more ---- \n"
msgstr " ----- mere ---- \n"

#: kxsldbgpart/libxsldbg/files.cpp:1363
msgid "Error: Unable to convert %1 to local file name.\n"
msgstr "Fejl: Kunne ikke konvertere %1 til lokalt filnavn.\n"

#: kxsldbgpart/libxsldbg/files_unix.cpp:67
msgid "Error: USER environment variable is not set.\n"
msgstr "Fejl: USER-miljøvariabel er ikke sat.\n"

#: kxsldbgpart/libxsldbg/files_unix.cpp:199
msgid ""
"Error: The value of the option docspath or searchresultspath is empty. See "
"help on setoption or options command for more information.\n"
msgstr ""
"Fejl: Værdien af indstillingen docspath eller searchresultpath er tom. Se "
"hjælp til setoption eller options command for mere information.\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:59
#: kxsldbgpart/libxsldbg/help_unix.cpp:64
msgid "xsldbg version"
msgstr "xsldbg-version"

#: kxsldbgpart/libxsldbg/help_unix.cpp:60
#: kxsldbgpart/libxsldbg/help_unix.cpp:65
msgid "Help document version"
msgstr "Hjælpedokument-version"

#: kxsldbgpart/libxsldbg/help_unix.cpp:61
#: kxsldbgpart/libxsldbg/help_unix.cpp:66
msgid "Help not found for command"
msgstr "Ingen hjælp fundet til kommando"

#: kxsldbgpart/libxsldbg/help_unix.cpp:98
msgid ""
"Error: Unable to display help. Help files not found in %1 or xsldbg not "
"found in path.\n"
msgstr ""
"Fejl: Kunne ikke vise hjælpen. Hjælpefiler blev ikke fundet i %1 eller "
"xsldbg ikke fundet i stien.\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:100
msgid "Error: Unable to find xsldbg or help files.\n"
msgstr "Fejl: Kunne ikke finde xsldbg eller hjælpefiler.\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:105
msgid "Error: Unable to print help file.\n"
msgstr "Fejl: Kunne ikke udskrive hjælpefil.\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:110
msgid "Error: No path to documentation; aborting help.\n"
msgstr "Fejl: Ingen sti til dokumentation, afslutter hjælp.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:140
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:243
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:383
msgid "Error: XPath %1 results in an empty Node Set.\n"
msgstr "Fejl: XPath %1 resulterer i en tomt knudeopsætning.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:175
msgid ""
"Information: Temporarily setting document's encoding to UTF-8. Previously "
"was %1.\n"
msgstr ""
"Information: Sætter midlertidigt dokumentets tegnsætindkodning til UTF-8. "
"Før var det %1.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:229
msgid "Error: Unable to save temporary results to %1.\n"
msgstr "Fejl: Kunne ikke gemme midlertidige resultater til %1.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:251
msgid "NULL string value supplied."
msgstr "NULL strengværdi givet."

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:262
msgid "Unable to convert XPath to string."
msgstr "Kunne ikke konvertere XPath til streng."

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:358
msgid ""
"Warning: Unable to print expression. No stylesheet was properly loaded.\n"
msgstr "Advarsel: Kunne ikke udskrive udtryk. Intet stilark blev indlæst.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:418
msgid " Global %1\n"
msgstr " Global %1\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:421
msgid " Global "
msgstr " Global "

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:424
msgid " Global = %1\n"
msgstr " Global = %1\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:427
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:430
msgid ""
" Global = %1\n"
"%2"
msgstr ""
" Global = %1\n"
"%2"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:430
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:568
msgid "Warning: No value assigned to variable.\n"
msgstr "Advarsel: Ingen værdi tildelt til variabel.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:483
msgid ""
"Error: Debugger has no files loaded or libxslt has not reached a template.\n"
"Try reloading files or taking more steps.\n"
msgstr ""
"Fejl: Fejlsøger har ingen filer indlæst eller libxslt har ikke kunnet finde "
"en skabelon.\n"
"Forsøg at genindlæse filerne eller gør noget andet.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:520
msgid ""
"Error: Libxslt has not initialized variables yet; try stepping to a "
"template.\n"
msgstr ""
"Fejl: Libxslt har ingen variabler initialiseret endnu. Forsøg at gå til en "
"skabelon.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:556
#, c-format
msgid " Local %1"
msgstr " Lokal %1"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:559
msgid " Local "
msgstr " Lokal "

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:562
msgid " Local = %1\n"
msgstr " Lokal = %1\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:565
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:568
msgid ""
" Local = %1\n"
"%2"
msgstr ""
" Lokal = %1\n"
"%2"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:583
msgid ""
"Error: Libxslt has not initialized variables yet; try stepping past the xsl:"
"param elements in the template.\n"
msgstr ""
"Fejl: Libxslt har ikke initialiseret variabler endnu. Forsøg at springe over "
"xsl:param elementerne i skabelonen.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:73
#: kxsldbgpart/libxsldbg/option_cmds.cpp:107
msgid "Error: Unable to parse %1 as an option value.\n"
msgstr "Fejl: Kunne ikke tolke %1 som en tilvalgsværdi.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:110
msgid "Error: Unknown option name %1.\n"
msgstr "Fejl: Ukendt tilvalgsnavn %1.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:146
msgid "Option %1 = %2\n"
msgstr "Tilvalg %1 = %2\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:157
msgid "Option %1 = \"%2\"\n"
msgstr "Tilvalg %1 = \"%2\"\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:159
msgid "Option %1 = \"\"\n"
msgstr "Tilvalg %1 = \"\"\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:230
msgid "\tNo expression watches set.\n"
msgstr "\tIngen udtryksvagt indstillet.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:237
msgid " WatchExpression %1 "
msgstr " WatchExpression %1 "

#: kxsldbgpart/libxsldbg/option_cmds.cpp:263
msgid ""
"Error: Unable to add watch expression \"%1\". It already has been added or "
"it cannot be watched.\n"
msgstr ""
"Fejl: Kunne ikke tilføje udtryksvagt \"%1\". Den er allerede tilføjet eller  "
"kan ikke overvåges.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:287
msgid "Error: Unable to parse %1 as a watchID.\n"
msgstr "Fejl: Kunne ikke tolke %1 som et vagtID.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:292
msgid "Error: Watch expression %1 does not exist.\n"
msgstr "Fejl: Udtryksvagt %1 eksisterer ikke.\n"

#: kxsldbgpart/libxsldbg/options.cpp:296 kxsldbgpart/libxsldbg/options.cpp:326
msgid "Error: Option %1 is not a valid boolean/integer option.\n"
msgstr "Fejl: Tilvalg %1 er ikke et gyldigt boolsk/heltals-tilvalg.\n"

#: kxsldbgpart/libxsldbg/options.cpp:368 kxsldbgpart/libxsldbg/options.cpp:399
msgid "Error: Option %1 is not a valid string xsldbg option.\n"
msgstr "Fejl: Tilvalg %1 er ikke et gyldigt streng xsldbg-tilvalg.\n"

#: kxsldbgpart/libxsldbg/options.cpp:511
msgid " Parameter %1 %2=\"%3\"\n"
msgstr " Parameter %1 %2=\"%3\"\n"

#: kxsldbgpart/libxsldbg/options.cpp:546
msgid ""
"\n"
"No parameters present.\n"
msgstr ""
"\n"
"Ingen parametre tilstede.\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:72
msgid "Error: No command processor available for shell command \"%1\".\n"
msgstr "Fejl: Ingen kommandobehandler tilgængelig for skalkommandoen \"%1\".\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:77
msgid "Information: Starting shell command \"%1\".\n"
msgstr "Information: Starter skalkommando \"%1\".\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:92
msgid "Information: Finished shell command.\n"
msgstr "Information: Afsluttede skalkommando.\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:96
msgid "Error: Unable to run command. System error %1.\n"
msgstr "Fejl: Kunne ikke køre kommando. Systemfejl %1.\n"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:48
msgid "Failed to add parameter"
msgstr "Kunne ikke tilføje parameter"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:96
msgid "Failed to delete parameter"
msgstr "Kunne ikke slette parameter"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:112
msgid "Error: Unable to find parameter %1.\n"
msgstr "Fejl: Kunne ikke finde parameter %1.\n"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:146
msgid "Unable to print parameters"
msgstr "Kunne ikke udskrive parametre"

#: kxsldbgpart/libxsldbg/search.cpp:414
msgid ""
"Error: Unable to write search Database to file %1. Try setting the "
"\"searchresultspath\" option to a writable path.\n"
msgstr ""
"Fejl: Kunne ikke skrive søgedatabasen til filen %1. Sæt \"søgeresultatsti\" -"
"indstillingen til en skrivbar sti.\n"

#: kxsldbgpart/libxsldbg/search.cpp:489
msgid "Information: Transformed %1 using %2 and saved to %3.\n"
msgstr "Information: Omdannede %1 vha. %2 og gemte til %3.\n"

#: kxsldbgpart/libxsldbg/search.cpp:730
msgid "Error: XSLT template named \"%1\" was not found.\n"
msgstr "Fejl: XSLT-skabelon ved navn \"%1\" blev ikke fundet.\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:52
msgid "Error: No path to documentation; aborting searching.\n"
msgstr "Fejl: Ingen søgesti til dokumentation. Søgning afslutter.\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:54
msgid "Error: Error in value of USE_DOCS_MACRO; look at Makefile.am.\n"
msgstr "Fejl: Fejl i værdi af USE_DOCS_MACRO. Se i make-filen.\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:56
msgid ""
"Error: Required environment variable %1 not set to the directory of xsldbg "
"documentation.\n"
msgstr ""
"Fejl: Krævet miljøvariabel %1 ikke sat til xslt-dokumentationskatalog.\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:62
msgid "Error: Stylesheet not valid, files not loaded yet?\n"
msgstr "Fejl: Ugyldigt stilark. Filer endnu ikke indlæst?\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:135
msgid " template: \"%1\" mode: \"%2\" in file \"%3\" at line %4\n"
msgstr " skabelon: \"%1\" format: \"%2\" i fil \"%3\" på linje %4\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:184
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:36
msgid "Error: Stylesheet is not valid.\n"
msgstr "Fejl: Stilark ikke gyldigt.\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:226
msgid "\tNo XSLT templates found.\n"
msgstr "\tIngen XSLT-skabeloner fundet.\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:228
#, c-format
msgid ""
"_n: \tTotal of %n XSLT template found\n"
"\tTotal of %n XSLT templates found"
msgstr ""
"\tI alt %n XSLT-skabelon fundet\n"
"\tI alt %n XSLT-skabeloner fundet."

#: kxsldbgpart/libxsldbg/template_cmds.cpp:229
#, c-format
msgid ""
"_n: \tTotal of %n XSLT template printed\n"
"\tTotal of %n XSLT templates printed"
msgstr ""
"\tI alt %n XSLT-skabelon udskrevet\n"
"\tI alt %n XSLT-skabeloner udskrevet."

#: kxsldbgpart/libxsldbg/template_cmds.cpp:261
#: kxsldbgpart/libxsldbg/template_cmds.cpp:290
msgid " Stylesheet %1\n"
msgstr " Stilark %1\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:325
#, c-format
msgid ""
"_n: \tTotal of %n XSLT stylesheet found.\n"
"\tTotal of %n XSLT stylesheets found."
msgstr ""
"\tI alt %n XSLT stilark fundet.\n"
"\tI alt %n XSLT stilark fundet."

#: kxsldbgpart/libxsldbg/template_cmds.cpp:328
msgid "\tNo XSLT stylesheets found.\n"
msgstr "\tIngen XSLT stilark fundet.\n"

#: kxsldbgpart/libxsldbg/trace_cmds.cpp:69
msgid "Warning: Assuming normal speed.\n"
msgstr "Advarsel: Antager normal hastighed.\n"

#: kxsldbgpart/libxsldbg/utils.cpp:111
msgid "Error: Unmatched quotes in input.\n"
msgstr "Fejl: Ikke-matchende citater i inddata.\n"

#: kxsldbgpart/libxsldbg/variable_cmds.cpp:99
msgid ""
"Error: Cannot change a variable that does not use the select attribute.\n"
msgstr ""
"Fejl: Kan ikke ændre en variabel der ikke benytter den valgte attribut.\n"

#: kxsldbgpart/libxsldbg/variable_cmds.cpp:102
msgid "Error: Variable %1 was not found.\n"
msgstr "Fejl: Variablen %1 blev ikke fundet.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:270 kxsldbgpart/libxsldbg/xsldbg.cpp:298
#: kxsldbgpart/libxsldbg/xsldbg.cpp:320
msgid "%1 took %2 ms to complete.\n"
msgstr "%1 tog %2 ms at fuldføre.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:361
#, c-format
msgid "XInclude processing %1."
msgstr "XInclude processerer %1."

#: kxsldbgpart/libxsldbg/xsldbg.cpp:399 kxsldbgpart/libxsldbg/xsldbg.cpp:446
msgid "Error: Unable to write temporary results to %1.\n"
msgstr "Fejl: Kunne ikke skrive midlertidige resultater til %1.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:409
#, c-format
msgid ""
"_n: Applying stylesheet %n time\n"
"Applying stylesheet %n times"
msgstr ""
"Anvender stilark %n gang\n"
"Anvender stilark %n gange"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:412
msgid "Applying stylesheet"
msgstr "Anvender stilark"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:473 kxsldbgpart/libxsldbg/xsldbg.cpp:491
msgid "Saving result"
msgstr "Gemmer resultat"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:476
msgid "Warning: Generating non-standard output XHTML.\n"
msgstr "Advarsel: Opretter ikke-standard uddata XHTML.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:493
msgid "Warning: Unsupported, non-standard output method %1.\n"
msgstr "Advarsel: Ikke understøttet, ikke-standard uddata metode %1.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:509
msgid "Running stylesheet and saving result"
msgstr "Kører stilark og gemmer resultat"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:516
msgid "Error: Unable to save results of transformation to file %1.\n"
msgstr "Fejl: Kunne ikke resultater af transformation til filen %1.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:558 kxsldbgpart/libxsldbg/xsldbg.cpp:887
#: kxsldbgpart/libxsldbg/xsldbg.cpp:919 kxsldbgpart/libxsldbg/xsldbg.cpp:997
msgid "Fatal error: Aborting debugger due to an unrecoverable error.\n"
msgstr ""
"Fatal fejl: Afslutter fejlsøger pga. en fejl der ikke kan genoprettes.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:683
msgid ""
"Warning: Too many libxslt parameters provided via the command line option --"
"param.\n"
msgstr ""
"Advarsel: For mange libxslt-parametre givet gennem kommandolinjentilvalget --"
"param.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:692
msgid ""
"Error: Argument \"%1\" to --param is not in the format <name>:<value>.\n"
msgstr "Fejl: Argument \"%1\"til --param er ikke i formatet <navn>:<værdi>.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:744
msgid ""
"\n"
"Starting stylesheet\n"
"\n"
msgstr ""
"\n"
"Starter stilark\n"
"\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:755
msgid "Error: No XSLT source file supplied.\n"
msgstr "Fejl: Ingen XSLT-kildefile givet.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:758
msgid "Error: No XML data file supplied.\n"
msgstr "Fejl: Ingen XML-datafil givet.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:795
msgid ""
"\n"
"Debugger never received control.\n"
msgstr ""
"\n"
"Fejlsøger modtog aldrig kontrol.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:800
msgid ""
"\n"
"Finished stylesheet\n"
"\n"
msgstr ""
"\n"
"Afsluttede stilark\n"
"\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:857
msgid ""
"Going to the command shell; not all xsldbg commands will work as not all "
"needed have been loaded.\n"
msgstr ""
"Går til kommandoskal. Ikke alle xsldbg-kommandoer fungerer, idet ikke alle "
"nødvendige blev indlæst.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:914
#, c-format
msgid "Parsing stylesheet %1"
msgstr "Tolker stilark %1"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:916
msgid "Error: Cannot parse file %1.\n"
msgstr "Fejl: Kan ikke tolke fil %1.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:995 kxsldbgpart/libxsldbg/xsldbg.cpp:1043
msgid "Error: Unable to parse file %1.\n"
msgstr "Fejl: Kunne ikke tolke filen %1.\n"

#: kxsldbgpart/xsldbgbreakpointlistitem.cpp:38
#: kxsldbgpart/xsldbgbreakpoints.ui:81
#, no-c-format
msgid "Enabled"
msgstr "Aktiveret"

#: kxsldbgpart/xsldbgbreakpointlistitem.cpp:40
msgid "Disabled"
msgstr "Deaktiveret"

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:83
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:92
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:115
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:120
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:143
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:148 kxsldbgpart/xsldbgdebugger.cpp:297
#: kxsldbgpart/xsldbgdebugger.cpp:317 kxsldbgpart/xsldbgdebugger.cpp:335
#: kxsldbgpart/xsldbgdebugger.cpp:355 kxsldbgpart/xsldbgdebugger.cpp:375
#: kxsldbgpart/xsldbgdebugger.cpp:394
msgid "Operation Failed"
msgstr "Operation mislykkedes"

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:84
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:116
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:144
msgid "A line number was provided without a file name."
msgstr "Et linjetal blev angivet uden et filnavn."

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:93
msgid "No details provided or an invalid line number was supplied."
msgstr "Ingen detaljer givet eller et ugyldigt tal angivet."

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:121
msgid "No details provided or an invalid line or ID was supplied."
msgstr "Ingen detaljer givet eller en ugyldig linje eller ID angivet."

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:149
msgid "No details provided."
msgstr "Ingen detaljer givet."

#: kxsldbgpart/xsldbgconfigimpl.cpp:191
msgid "\t\"XSL source\" \n"
msgstr "\t\"XSL-kilde\" \n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:193
msgid "\t\"XML data\" \n"
msgstr "\t\"XML-data\" \n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:195
msgid "\t\"Output file\" \n"
msgstr "\t\"Uddata-fil\" \n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:197
msgid "Missing values for \n"
msgstr "Manglende værdier for \n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:201
msgid "Output file is the same as either XSL Source or XML Data file\n"
msgstr "Uddata-filen er den samme som enten XSL-kilde eller XML-datafil\n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:220
msgid ""
"The following libxslt parameters are empty\n"
"\t"
msgstr ""
"Følgende libxslt-parametre er tomme\n"
"\t"

#: kxsldbgpart/xsldbgconfigimpl.cpp:370
msgid "Choose XSL Source to Debug"
msgstr "Vælg XSL-kilde at fejlsøge"

#: kxsldbgpart/xsldbgconfigimpl.cpp:382
msgid "Choose XML Data to Debug"
msgstr "Vælg XML-data at fejlsøge"

#: kxsldbgpart/xsldbgconfigimpl.cpp:393
msgid "Choose Output File for XSL Transformation"
msgstr "Vælg uddatafil for XSL-transformation"

#: kxsldbgpart/xsldbgconfigimpl.cpp:484
msgid "Suspect Configuration"
msgstr "Mistænk konfiguration"

#: kxsldbgpart/xsldbgconfigimpl.cpp:488
msgid "Incomplete or Invalid Configuration"
msgstr "Ufuldstændig eller ugyldig konfiguration"

#: kxsldbgpart/xsldbgdebugger.cpp:298 kxsldbgpart/xsldbgdebugger.cpp:318
#: kxsldbgpart/xsldbgdebugger.cpp:336 kxsldbgpart/xsldbgdebugger.cpp:356
#: kxsldbgpart/xsldbgdebugger.cpp:376 kxsldbgpart/xsldbgdebugger.cpp:395
msgid "Cannot set/edit breakpoints on the output file."
msgstr "Kan ikke sætte/redigere stoppunkter i uddatafilen."

#: kxsldbgpart/xsldbginspector.cpp:68
msgid "Xsldbg Inspector"
msgstr "Xsldbg-Inspektør"

#: kxsldbgpart/xsldbginspector.cpp:77
msgid "Breakpoints"
msgstr "Stoppunkter"

#: kxsldbgpart/xsldbginspector.cpp:83
msgid "Variables"
msgstr "Variabler"

#: kxsldbgpart/xsldbginspector.cpp:89
msgid "CallStack"
msgstr "Kaldestak"

#: kxsldbgpart/xsldbginspector.cpp:95
msgid "Templates"
msgstr "Skabeloner"

#: kxsldbgpart/xsldbginspector.cpp:101
msgid "Sources"
msgstr "Kilder"

#: kxsldbgpart/xsldbginspector.cpp:107
msgid "Entities"
msgstr "Entiteter"

#: kxsldbgpart/xsldbginspector.cpp:126
msgid "Apply changes to xsldbg after restarting execution"
msgstr "Anvend ændringer på xsldbg efter genstart af udførslen"

#: kxsldbgpart/xsldbginspector.cpp:133
msgid "&Refresh"
msgstr "&Genopfrisk"

#: kxsldbgpart/xsldbginspector.cpp:134
msgid "Refresh values in inspectors from xsldbg"
msgstr "Genopfrisk værdier i inspektører fra xsldbg"

#: kxsldbgpart/xsldbglocallistitem.cpp:32
#: kxsldbgpart/xsldbglocalvariablesimpl.cpp:71
msgid "Local"
msgstr "Lokal"

#: kxsldbgpart/xsldbglocallistitem.cpp:34
#: kxsldbgpart/xsldbglocalvariablesimpl.cpp:73
msgid "Global"
msgstr "Global"

#: kxsldbgpart/xsldbgoutputview.cpp:61
msgid "xsldbg Output"
msgstr "xsldbg-uddata"

#: kxsldbgpart/xsldbgoutputview.cpp:62
msgid ""
"\t\txsldbg output capture ready\n"
"\n"
msgstr ""
"\t\txsldbg uddata-indfangning parat\n"
"\n"

#: kxsldbgpart/xsldbgoutputview.cpp:76
msgid "Result of evaluation"
msgstr "Resultat af evaluering"

#: kxsldbgpart/xsldbgoutputview.cpp:93
msgid "Request Failed "
msgstr "Forespørgsel mislykkedes"

#: main.cpp:9
msgid "A TDE KPart Application for xsldbg, an XSLT debugger"
msgstr "Et TDE KPart-progran for xsldbg, en XSLT-fejlretter"

#: main.cpp:14 xsldbgmain.cpp:96
msgid "XSL script to run"
msgstr "XSL-script at køre"

#: main.cpp:15 xsldbgmain.cpp:97
msgid "XML data to be transformed"
msgstr "XML-data at omdanne"

#: main.cpp:16
msgid "File to save results to"
msgstr "Fil at gemme resultater i"

#: main.cpp:22
msgid "KXSLDbg"
msgstr "KXSLDbg"

#: xsldbgmain.cpp:50
msgid "A TDE console application for xsldbg, an XSLT debugger"
msgstr "Et TDE konsolprogram til xsltdbg. En XSLT-fejlsøger"

#: xsldbgmain.cpp:56
msgid "Start a shell"
msgstr "Start en skal"

#: xsldbgmain.cpp:57
msgid "Path to change into before loading files"
msgstr "Søgesti der skal ændres, før indlæsning af filer"

#: xsldbgmain.cpp:58
msgid "Add a parameter named <name> and value <value> to XSL environment"
msgstr "Tilføj en parameter ved navn <navn> og <værdi> til XSL-miljø"

#: xsldbgmain.cpp:59
msgid "Use ISO 639 language code specified; for example en_US"
msgstr "Brug den angivne ISO 639 sprogkode. F.eks. da_DK"

#: xsldbgmain.cpp:59
msgid "Save to a given file. See output command documentation"
msgstr "Gem til en given fil. Se dokumentation for uddatakommando"

#: xsldbgmain.cpp:60
msgid "Show the version of libxml and libxslt used"
msgstr "Vis libxml-version og den benyttede libxslt."

#: xsldbgmain.cpp:61
msgid "Show logs of what is happening"
msgstr "Vis logfiler af hvad der sker"

#: xsldbgmain.cpp:62
msgid "Display the time used"
msgstr "Vis forbrugt tid"

#: xsldbgmain.cpp:63
msgid "Run the transformation 20 times"
msgstr "Kør omdannelsen 20 gange"

#: xsldbgmain.cpp:65
msgid "Dump the tree of the result instead"
msgstr "Drop resultattræet i stedet"

#: xsldbgmain.cpp:67
msgid "Disable the DTD loading phase"
msgstr "Deaktivér DTD-indlæsningsfasen"

#: xsldbgmain.cpp:68
msgid "Disable the output of the result"
msgstr "Deaktivér udskrift af resultattræet"

#: xsldbgmain.cpp:69
msgid "Increase the maximum depth"
msgstr "Forøg den maksimale dybde"

#: xsldbgmain.cpp:72
msgid "The input document is(are) an HTML file(s)"
msgstr "Inddatadokumentet er en eller flere HTML-filer"

#: xsldbgmain.cpp:76
msgid "The input document is SGML docbook"
msgstr "Inddatadokumentet er en SGML docbook-fil"

#: xsldbgmain.cpp:79
msgid "Disable the fetching DTDs or entities over network"
msgstr "Deaktivér hentning af DTD'er eller objekter over netværket"

#: xsldbgmain.cpp:82
msgid "Use the catalogs from $SGML_CATALOG_FILES"
msgstr "Benyt kataloger fra $SGML_CATALOGS_FILES"

#: xsldbgmain.cpp:86
msgid "Disable XInclude processing on document input"
msgstr "Deaktivér XIncludebehandling på dokumentinddata"

#: xsldbgmain.cpp:89
msgid "Print profiling informations"
msgstr "Udskriv profilinformation"

#: xsldbgmain.cpp:90
msgid "Do not run gdb compatability mode and print less information"
msgstr "Kør ikke i gdb-kompatibilitetstilstand og udskriv mindre information"

#: xsldbgmain.cpp:91
msgid "Detect and use encodings in the stylesheet"
msgstr "Genkend og benyt tegnsætindkodning i stilark"

#: xsldbgmain.cpp:92
msgid "Treat command line input as encoded in UTF-8"
msgstr "Betragt kommandolinjeinddata som UTF-8 tegnsætindkodet"

#: xsldbgmain.cpp:93
msgid "Use HTML output when generating search reports"
msgstr "Brug HTML-uddata når der oprettes søgerapporter"

#: xsldbgmain.cpp:94
msgid ""
"Print all error messages to stdout, normally error messages go to stderr"
msgstr ""
"Udskriv alle fejlmeddelelser til stdout. Normalt går fejlmeddelelser til "
"stderr"

#: xsldbgmain.cpp:95
msgid ""
"Disable the automatic restarting of execution when current processing pass "
"is complete"
msgstr ""
"Deaktivér automatisk genstart af kørselen når nuværende behandlingsforløb er "
"fuldført."

#: xsldbgmain.cpp:123
msgid "Using libxml %1, libxslt %2 and libexslt %3\n"
msgstr "Bruger libxml %1, libxslt %2 og libexslt %3\n"

#: xsldbgmain.cpp:124
msgid "xsldbg was compiled against libxml %1, libxslt %2 and libexslt %3\n"
msgstr "xsldbg blev oversat mod libxml %1, libxslt %2 og libexslt %3\n"

#: xsldbgmain.cpp:125
msgid "libxslt %1 was compiled against libxml %2\n"
msgstr "libxslt %1 blev oversat mod libxml %2\n"

#: xsldbgmain.cpp:126
msgid "libexslt %1 was compiled against libxml %2\n"
msgstr "libexslt %1 blev oversat mod libxml %2\n"

#: xsldbgmain.cpp:129
msgid "Xsldbg"
msgstr "Xsldbg"

#: kxsldbg_shell.rc:9 kxsldbgpart/kxsldbg_part.rc:4
#, no-c-format
msgid "Debug"
msgstr "Fejlret"

#: kxsldbgpart/xsldbgbreakpoints.ui:17
#, no-c-format
msgid "Xsldbg Breakpoints"
msgstr "Xsldbg-stoppunkter"

#: kxsldbgpart/xsldbgbreakpoints.ui:26
#, no-c-format
msgid "ID"
msgstr "ID"

#: kxsldbgpart/xsldbgbreakpoints.ui:37 kxsldbgpart/xsldbgglobalvariables.ui:40
#: kxsldbgpart/xsldbglocalvariables.ui:150 kxsldbgpart/xsldbgtemplates.ui:32
#, no-c-format
msgid "Name"
msgstr "Navn"

#: kxsldbgpart/xsldbgbreakpoints.ui:48 kxsldbgpart/xsldbgtemplates.ui:43
#, no-c-format
msgid "Mode"
msgstr "Tilstand"

#: kxsldbgpart/xsldbgbreakpoints.ui:59
#, no-c-format
msgid "File Name"
msgstr "Filnavn"

#: kxsldbgpart/xsldbgbreakpoints.ui:70 kxsldbgpart/xsldbgcallstack.ui:54
#: kxsldbgpart/xsldbgtemplates.ui:65
#, no-c-format
msgid "Line Number"
msgstr "Linjenummer"

#: kxsldbgpart/xsldbgbreakpoints.ui:102
#, no-c-format
msgid "Click breakpoint in list to modify or delete it"
msgstr "Klik på et stoppunkt i listen for at ændre eller slette det"

#: kxsldbgpart/xsldbgbreakpoints.ui:138
#, no-c-format
msgid "ID:"
msgstr "ID:"

#: kxsldbgpart/xsldbgbreakpoints.ui:146
#, no-c-format
msgid "Line number:"
msgstr "Linjenummer:"

#: kxsldbgpart/xsldbgbreakpoints.ui:154
#, no-c-format
msgid "You don't need to specify directory for file name"
msgstr "Du behøver ikke at angive mappe for filnavne"

#: kxsldbgpart/xsldbgbreakpoints.ui:162
#, no-c-format
msgid "Template name or match name to look for"
msgstr "Skabelonnavn eller tilpasningsnavn der skal kigges efter"

#: kxsldbgpart/xsldbgbreakpoints.ui:198 kxsldbgpart/xsldbgbreakpoints.ui:253
#, no-c-format
msgid "Must be positive"
msgstr "Skal være positiv"

#: kxsldbgpart/xsldbgbreakpoints.ui:285
#, no-c-format
msgid "Mode:"
msgstr "Tilstand:"

#: kxsldbgpart/xsldbgbreakpoints.ui:293
#, no-c-format
msgid "Name:"
msgstr "Navn:"

#: kxsldbgpart/xsldbgbreakpoints.ui:301
#, no-c-format
msgid "File name:"
msgstr "Filnavn:"

#: kxsldbgpart/xsldbgbreakpoints.ui:375
#, no-c-format
msgid "Delete breakpoint using ID"
msgstr "Slet stoppunkt vha. ID"

#: kxsldbgpart/xsldbgbreakpoints.ui:386
#, no-c-format
msgid "Clear entered text"
msgstr "Ryd indtastet tekst"

#: kxsldbgpart/xsldbgbreakpoints.ui:394
#, no-c-format
msgid "Add All"
msgstr "Tilføj alle"

#: kxsldbgpart/xsldbgbreakpoints.ui:397
#, no-c-format
msgid "Add breakpoint on all templates found"
msgstr "Tilføj stoppunkt på alle de fundne skabeloner"

#: kxsldbgpart/xsldbgbreakpoints.ui:408
#, no-c-format
msgid "Delete all breakpoints"
msgstr "Slet alle stoppunkter"

#: kxsldbgpart/xsldbgbreakpoints.ui:416
#, no-c-format
msgid "Enable"
msgstr "Aktivér"

#: kxsldbgpart/xsldbgbreakpoints.ui:419
#, no-c-format
msgid "Enable breakpoint using ID"
msgstr "Aktivér stoppunkt vha. ID"

#: kxsldbgpart/xsldbgbreakpoints.ui:430
#, no-c-format
msgid "Add breakpoint using file name with line number or a template name"
msgstr ""
"Tilføj stoppunkt ved brug af filnavn med linjenummer eller et skabelonnavn"

#: kxsldbgpart/xsldbgbreakpoints.ui:488 kxsldbgpart/xsldbgcallstack.ui:114
#: kxsldbgpart/xsldbgentities.ui:125 kxsldbgpart/xsldbgglobalvariables.ui:229
#: kxsldbgpart/xsldbglocalvariables.ui:324 kxsldbgpart/xsldbgsources.ui:111
#, no-c-format
msgid "Refresh"
msgstr "Genopfrisk"

#: kxsldbgpart/xsldbgcallstack.ui:17
#, no-c-format
msgid "Xsldbg Callstack"
msgstr "Xsldbg-kaldestak"

#: kxsldbgpart/xsldbgcallstack.ui:32
#, no-c-format
msgid "Frame# Template Name"
msgstr "Ramme# skabelonnavn"

#: kxsldbgpart/xsldbgcallstack.ui:43 kxsldbgpart/xsldbgtemplates.ui:54
#, no-c-format
msgid "Source File Name"
msgstr "Kildefilens navn"

#: kxsldbgpart/xsldbgcallstack.ui:75
#, no-c-format
msgid "Oldest Frame # is 0, Frame # has been added to the first column"
msgstr "Ældste ramme # er 0. Ramme # er blevet tilføjet til første kolonne"

#: kxsldbgpart/xsldbgconfig.ui:31
#, no-c-format
msgid "KXsldbg Configuration"
msgstr "KXsldbg-indstilling"

#: kxsldbgpart/xsldbgconfig.ui:75
#, no-c-format
msgid "LibXSLT Parameters"
msgstr "LibXSLT-parametre"

#: kxsldbgpart/xsldbgconfig.ui:108
#, no-c-format
msgid "Parameter value:"
msgstr "Parameterens værdi:"

#: kxsldbgpart/xsldbgconfig.ui:148
#, no-c-format
msgid "Parameter name:"
msgstr "Parameterens navn:"

#: kxsldbgpart/xsldbgconfig.ui:229
#, no-c-format
msgid "Prev"
msgstr "Forrige"

#: kxsldbgpart/xsldbgconfig.ui:464
#, no-c-format
msgid "Output file:"
msgstr "Uddata-fil:"

#: kxsldbgpart/xsldbgconfig.ui:488 kxsldbgpart/xsldbgconfig.ui:536
#: kxsldbgpart/xsldbgconfig.ui:584
#, no-c-format
msgid "..."
msgstr "..."

#: kxsldbgpart/xsldbgconfig.ui:512
#, no-c-format
msgid "XML data:"
msgstr "XML data:"

#: kxsldbgpart/xsldbgconfig.ui:560
#, no-c-format
msgid "XSL source:"
msgstr "XSL-kilde:"

#: kxsldbgpart/xsldbgconfig.ui:621
#, no-c-format
msgid "catalogs"
msgstr "kataloger"

#: kxsldbgpart/xsldbgconfig.ui:624
#, no-c-format
msgid "use catalogs from $SGML_CATALOGS_FILES"
msgstr "brug kataloger fra $SGML_CATALOGS_FILES"

#: kxsldbgpart/xsldbgconfig.ui:632
#, no-c-format
msgid "novalid"
msgstr "ugyldig"

#: kxsldbgpart/xsldbgconfig.ui:635
#, no-c-format
msgid "skip the DTD loading phase"
msgstr "spring DTD-indlæsningsfasen over"

#: kxsldbgpart/xsldbgconfig.ui:643
#, no-c-format
msgid "html"
msgstr "html"

#: kxsldbgpart/xsldbgconfig.ui:646
#, no-c-format
msgid "the input document is(are) an HTML file(s)"
msgstr "inddatadokumentet er en (eller flere) HTML-fil"

#: kxsldbgpart/xsldbgconfig.ui:654
#, no-c-format
msgid "docbook"
msgstr "docbook"

#: kxsldbgpart/xsldbgconfig.ui:657
#, no-c-format
msgid "the input document is SGML docbook"
msgstr "inddatadokumentet er en SGML docbook-fil"

#: kxsldbgpart/xsldbgconfig.ui:665
#, no-c-format
msgid "debug"
msgstr "fejlret"

#: kxsldbgpart/xsldbgconfig.ui:668
#, no-c-format
msgid "dump the tree of the result instead"
msgstr "dump resultattræet i stedet for"

#: kxsldbgpart/xsldbgconfig.ui:676
#, no-c-format
msgid "noout"
msgstr "ingen uddata"

#: kxsldbgpart/xsldbgconfig.ui:679
#, no-c-format
msgid "do not dump the result"
msgstr "dump ikke resultatet"

#: kxsldbgpart/xsldbgconfig.ui:687
#, no-c-format
msgid "profile"
msgstr "profil"

#: kxsldbgpart/xsldbgconfig.ui:690
#, no-c-format
msgid "print profiling information"
msgstr "skriv profilinformation"

#: kxsldbgpart/xsldbgconfig.ui:698
#, no-c-format
msgid "timing"
msgstr "tidtagning"

#: kxsldbgpart/xsldbgconfig.ui:701
#, no-c-format
msgid "display the time used"
msgstr "vis hvor lang tid det tog"

#: kxsldbgpart/xsldbgconfig.ui:709
#, no-c-format
msgid "nonet"
msgstr "intet net"

#: kxsldbgpart/xsldbgconfig.ui:712
#, no-c-format
msgid "refuse to fetch DTDs or entities over network"
msgstr "afvis at hente DTD'er eller objekter over netværket"

#: kxsldbgpart/xsldbgentities.ui:25
#, no-c-format
msgid "Xsldbg Entities"
msgstr "Xsldbg-entiteter"

#: kxsldbgpart/xsldbgentities.ui:40
#, no-c-format
msgid "PublicID"
msgstr "PublicID"

#: kxsldbgpart/xsldbgentities.ui:51
#, no-c-format
msgid "SystemID"
msgstr "SystemID"

#: kxsldbgpart/xsldbgglobalvariables.ui:25
#, no-c-format
msgid "Xsldbg Global Variables"
msgstr "Xsldbg globale variabler"

#: kxsldbgpart/xsldbgglobalvariables.ui:51
#: kxsldbgpart/xsldbglocalvariables.ui:183 kxsldbgpart/xsldbgsources.ui:32
#, no-c-format
msgid "Source File"
msgstr "Kildefil"

#: kxsldbgpart/xsldbgglobalvariables.ui:62
#: kxsldbgpart/xsldbglocalvariables.ui:194
#, no-c-format
msgid "Source Line Number"
msgstr "Kilde linjenumre"

#: kxsldbgpart/xsldbgglobalvariables.ui:150
#: kxsldbgpart/xsldbglocalvariables.ui:87
#, no-c-format
msgid "Expression:"
msgstr "Udtryk:"

#: kxsldbgpart/xsldbgglobalvariables.ui:158
#: kxsldbgpart/xsldbglocalvariables.ui:95
#, no-c-format
msgid "Enter a valid XPath expression"
msgstr "Indtast et gyldigt XPath-udtryk"

#: kxsldbgpart/xsldbgglobalvariables.ui:188
#: kxsldbgpart/xsldbglocalvariables.ui:125
#, no-c-format
msgid "Result of evaluation will appear in message window"
msgstr "Resultatet af evalueringen vises i meddelelsesvinduet"

#: kxsldbgpart/xsldbglocalvariables.ui:25
#, no-c-format
msgid "Xsldbg Local Variables"
msgstr "Xsldbg lokal-variabler"

#: kxsldbgpart/xsldbglocalvariables.ui:161
#, no-c-format
msgid "Template Context"
msgstr "Skabeloners sammenhæng"

#: kxsldbgpart/xsldbglocalvariables.ui:172
#, no-c-format
msgid "Type"
msgstr "Type"

#: kxsldbgpart/xsldbglocalvariables.ui:228
#, no-c-format
msgid "Variable expression:"
msgstr "Variabeludtryk:"

#: kxsldbgpart/xsldbglocalvariables.ui:249
#, no-c-format
msgid "Variable type:"
msgstr "Variabeltype:"

#: kxsldbgpart/xsldbglocalvariables.ui:270
#, no-c-format
msgid "Set Expression"
msgstr "Sæt udtryk"

#: kxsldbgpart/xsldbglocalvariables.ui:273
#, no-c-format
msgid "Set the selection for variable "
msgstr "Sæt udvalget for variabel"

#: kxsldbgpart/xsldbglocalvariables.ui:283
#, no-c-format
msgid "Variable name:"
msgstr "Variabelnavn:"

#: kxsldbgpart/xsldbgmsgdialog.ui:26
#, no-c-format
msgid "qxsldbg Message"
msgstr "qxsldbg-meddelelse"

#: kxsldbgpart/xsldbgmsgdialog.ui:71
#, no-c-format
msgid "TextLabel1"
msgstr "Tekstetikette 1"

#: kxsldbgpart/xsldbgsources.ui:17
#, no-c-format
msgid "Xsldbg Source Files"
msgstr "Xsldbg kildefiler"

#: kxsldbgpart/xsldbgsources.ui:43
#, no-c-format
msgid "Parent File"
msgstr "Overordnet fil"

#: kxsldbgpart/xsldbgsources.ui:54
#, no-c-format
msgid "Parent Line Number"
msgstr "Overordnet linjenummer"

#: kxsldbgpart/xsldbgtemplates.ui:17
#, no-c-format
msgid "Xsldbg Templates"
msgstr "Xsldbg-skabeloner"

#: kxsldbgpart/xsldbgwalkspeed.ui:17
#, no-c-format
msgid "Configure xsldbg's Walk Speed"
msgstr "Indstil xsldbg's gå-hastighed"

#: kxsldbgpart/xsldbgwalkspeed.ui:51
#, no-c-format
msgid ""
"Change the speed at which xsldbg walks through execution of the stylesheet."
msgstr "Ændr den hastighed xsldbg skifter ved udførelse af stilarket."

#: kxsldbgpart/xsldbgwalkspeed.ui:95
#, no-c-format
msgid "Slow"
msgstr "Langsom"

#: kxsldbgpart/xsldbgwalkspeed.ui:117
#, no-c-format
msgid "Fast"
msgstr "Hurtig"

#~ msgid "Warning: The %1 command is disbled\n"
#~ msgstr "Advarsel: %1 -kommandoen er deaktiveret\n"

#~ msgid "XSL script to run."
#~ msgstr "XSL-script at køre."

#~ msgid "XML data to be transformed."
#~ msgstr "XML-data at omdanne."