# translation of kooka.po to German # Thomas Diehl , 2002. # Stephan Johach , 2003. # Stephan Johach , 2003, 2005. # Stefan Winter , 2004, 2005. # Thomas Reitelbach , 2005. # Übersetzung von kooka.po ins Deutsche # Copyright (C) msgid "" msgstr "" "Project-Id-Version: kooka\n" "POT-Creation-Date: 2021-07-07 18:19+0000\n" "PO-Revision-Date: 2020-03-25 10:28+0000\n" "Last-Translator: Chris \n" "Language-Team: German \n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Generator: Weblate 3.11.3\n" #. Instead of a literal translation, add your name to the end of the list (separated by a comma). msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "Stefan Winter, Chris (TDE)" #. Instead of a literal translation, add your email to the end of the list (separated by a comma). msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "swinter@kde.org" #: img_saver.cpp:63 msgid "Kooka Save Assistant" msgstr "Kooka Ablage-Assistent" #: img_saver.cpp:81 msgid "" "Save Assistant

Select an image format to save the scanned image." msgstr "" "Ablage-AssistentWählen Sie ein Dateiformat zum Speichern des " "eingelesenen Bildes." #: img_saver.cpp:99 msgid "Available image formats:" msgstr "Verfügbare Dateiformate:" #: img_saver.cpp:118 msgid "-No format selected-" msgstr "- Kein Format ausgewählt -" #: img_saver.cpp:125 msgid "Select the image sub-format" msgstr "Wählen Sie das Dateiunterformat aus" #: img_saver.cpp:130 msgid "Don't ask again for the save format if it is defined." msgstr "Nur nachfragen, wenn noch kein Speicherformat eingestellt ist." #: img_saver.cpp:164 msgid "-no hint available-" msgstr "- kein Tipp verfügbar -" #: img_saver.cpp:278 msgid "" "The folder\n" "%1\n" " does not exist and could not be created;\n" "please check the permissions." msgstr "" "Der Ordner\n" "%1\n" "existiert nicht und kann auch nicht erstellt werden.\n" "Bitte überprüfen Sie die Zugriffsrechte." #: img_saver.cpp:285 msgid "" "The directory\n" "%1\n" " is not writeable;\n" "please check the permissions." msgstr "" "In den Ordner\n" "%1\n" "lassen sich keine Daten speichern.\n" "Bitte überprüfen Sie die Zugriffsrechte." #: img_saver.cpp:344 msgid "Filename" msgstr "Dateiname" #: img_saver.cpp:344 msgid "Enter filename:" msgstr "Dateinamen eingeben:" #: img_saver.cpp:488 msgid "palleted color image (16 or 24 bit depth)" msgstr "Bild mit Palettenfarben (16- oder 24-Bit Farbtiefe)" #: img_saver.cpp:491 msgid "palleted gray scale image (16 bit depth)" msgstr "Bild mit Palettenfarben (16-Bit Graustufen)" #: img_saver.cpp:494 msgid "lineart image (black and white, 1 bit depth)" msgstr "Lineart (Schwarzweiß, 1-Bit Tiefe)" #: img_saver.cpp:497 msgid "high (or true-) color image, not palleted" msgstr "64000-Farben- oder Echtfarbenbild, ohne Palette" #: img_saver.cpp:500 msgid "Unknown image type" msgstr "Unbekanntes Bildformat" #: img_saver.cpp:711 msgid " image save OK " msgstr " Speichern des Bildes OK " #: img_saver.cpp:712 msgid " permission error " msgstr " Unzureichende oder falsche Zugriffsrechte " #: img_saver.cpp:713 msgid " bad filename " msgstr " Ungültiger Dateiname " #: img_saver.cpp:714 msgid " no space on device " msgstr " Kein Speicherplatz verfügbar " #: img_saver.cpp:715 msgid " could not write image format " msgstr " Das Bildformat lässt sich nicht anlegen " #: img_saver.cpp:716 msgid " can not write file using that protocol " msgstr " Das Abspeichern der Datei über dieses Protokoll ist nicht möglich " #: img_saver.cpp:717 msgid " user canceled saving " msgstr " Speichervorgang vom Benutzer abgebrochen " #: img_saver.cpp:718 msgid " unknown error " msgstr " Unbekannter Fehler " #: img_saver.cpp:719 msgid " parameter wrong " msgstr " Ungültiger Parameter " #: img_saver.cpp:768 img_saver.cpp:865 msgid "" "The filename you supplied has no file extension.\n" "Should the correct one be added automatically? " msgstr "" "Der von Ihnen angegebene Dateiname hat keine Erweiterung.\n" "Soll die richtige Erweiterung automatisch angefügt werden? " #: img_saver.cpp:769 img_saver.cpp:866 #, c-format msgid "That would result in the new filename: %1" msgstr "Daraus ergibt sich folgender neuer Dateiname: %1" #: img_saver.cpp:771 img_saver.cpp:868 msgid "Extension Missing" msgstr "Erweiterung fehlt" #: img_saver.cpp:772 img_saver.cpp:869 msgid "Add Extension" msgstr "Erweiterung hinzufügen" #: img_saver.cpp:772 img_saver.cpp:869 msgid "Do Not Add" msgstr "Nicht hinzufügen" #: img_saver.cpp:789 img_saver.cpp:883 msgid "Format changes of images are currently not supported." msgstr "Formatänderungen für Bilder werden derzeit nicht unterstützt." #: img_saver.cpp:790 img_saver.cpp:884 msgid "Wrong Extension Found" msgstr "Ungültige Erweiterung gefunden" #: imgprintdialog.cpp:55 msgid "Image Printing" msgstr "Bilddruck" #: imgprintdialog.cpp:60 imgprintdialog.cpp:113 msgid "Image Print Size" msgstr "Abmessungen des Ausdrucks" #: imgprintdialog.cpp:64 msgid "Scale to same size as on screen" msgstr "Auf Bildschirmabmessungen skalieren" #: imgprintdialog.cpp:66 msgid "Screen scaling. That prints according to the screen resolution." msgstr "" "Bildschirmskalierung. Der Ausdruck erfolgt entsprechend der " "Bildschirmauflösung." #: imgprintdialog.cpp:70 msgid "Original size (calculate from scan resolution)" msgstr "Originalgröße (berechnet aus der Scan-Auflösung)" #: imgprintdialog.cpp:73 msgid "" "Calculates the print size from the scan resolution. Enter the scan " "resolution in the dialog field below." msgstr "" "Berechnet die Abmessungen des Ausdrucks aus der Scan-Auflösung. Geben Sie " "die Auflösung in das Eingabefeld unten ein." #: imgprintdialog.cpp:77 msgid "Scale image to custom dimension" msgstr "Bild auf benutzerdefinierte Abmessungen skalieren" #: imgprintdialog.cpp:79 msgid "" "Set the print size yourself in the dialog below. The image is centered on " "the paper." msgstr "" "Bestimmen Sie die Größe des Ausdrucks im Dialog unten. Das Bild wird auf dem " "Papier zentriert." #: imgprintdialog.cpp:83 msgid "Scale image to fit to page" msgstr "Bild an Seitengröße anpassen" #: imgprintdialog.cpp:84 msgid "" "Printout uses maximum space on the selected pager. Aspect ratio is " "maintained." msgstr "" "Der Ausdruck nutzt den maximalen Platz auf dem ausgewählten Papierformat. " "Das Seitenverhältnis bleibt dabei erhalten." #: imgprintdialog.cpp:94 msgid "Resolutions" msgstr "Auflösungen" #: imgprintdialog.cpp:98 msgid "Generate low resolution PostScript (fast draft print)" msgstr "PostScript mit niedriger Auflösung generieren (Entwurfsmodus)" #: imgprintdialog.cpp:105 msgid "Scan resolution (dpi) " msgstr "Scan-Auflösung (dpi) " #: imgprintdialog.cpp:107 msgid " dpi" msgstr " dpi" #: imgprintdialog.cpp:117 msgid "Image width:" msgstr "Bildbreite:" #: imgprintdialog.cpp:118 imgprintdialog.cpp:122 msgid " mm" msgstr " mm" #: imgprintdialog.cpp:121 msgid "Image height:" msgstr "Bildhöhe:" #: imgprintdialog.cpp:125 msgid "Maintain aspect ratio" msgstr "Seitenverhältnis beibehalten" #: imgprintdialog.cpp:170 msgid "Screen resolution: %1 dpi" msgstr "Bildschirmauflösung: %1 dpi" #: imgprintdialog.cpp:214 msgid "Please specify a scan resolution larger than 0" msgstr "Bitte geben Sie eine Scan-Auflösung ein, die größer als 0 ist" #: imgprintdialog.cpp:219 msgid "" "For custom printing, a valid size should be specified.\n" "At least one dimension is zero." msgstr "" "Beim benutzerdefinierten Ausdruck müssen gültige Abmessungen eingeben " "werden.\n" "Zumindest eine Dimension hat den Wert Null." #: kocrbase.cpp:64 kookapref.cpp:77 msgid "Optical Character Recognition" msgstr "Optische Zeichenerkennung (OCR)" #: kocrbase.cpp:66 msgid "Start OCR" msgstr "Zeichenerkennung (OCR) starten" #: kocrbase.cpp:67 msgid "Start the Optical Character Recognition process" msgstr "Optische Zeichenerkennung (OCR) starten" #: kocrbase.cpp:69 msgid "Stop the OCR Process" msgstr "Optische Zeichenerkennung anhalten" #: kocrbase.cpp:121 msgid "Image" msgstr "Bild" #: kocrbase.cpp:122 msgid "Image Information" msgstr "Bild-Information" #: kocrbase.cpp:147 kookapref.cpp:77 msgid "OCR" msgstr "OCR" #: kocrbase.cpp:151 msgid "Starting Optical Character Recognition with %1

" msgstr "Optische Zeichenerkennung (OCR) wird mit %1 gestartet

" #: kocrbase.cpp:178 msgid "Spell-checking" msgstr "Rechtschreibprüfung" #: kocrbase.cpp:181 msgid "OCR Post Processing" msgstr "OCR-Nachbearbeitung" #: kocrbase.cpp:182 msgid "Enable spell-checking for validation of the OCR result" msgstr "Rechtschreibprüfung für Ergebnis der OCR" #: kocrbase.cpp:185 msgid "Spell-Check Options" msgstr "Rechtschreibprüfung-Einstellungen" #: kocrgocr.cpp:76 msgid "GOCR" msgstr "GOCR" #: kocrgocr.cpp:81 msgid "" "GOCR is an Open Source project for optical character recognition.

The " "author of gocr is Joerg Schulenburg
For more information about " "gocr see http://jocr.sourceforge.net" msgstr "" "GOCR ist ein Open Source Projekt für Optische Zeichenerkennung.

Autor von " "gocr ist Jörg Schulenburg
Weitere Informationen über gocr finden " "Sie unter http://jocr.sourceforge." "net" #: kocrgocr.cpp:110 msgid "" "The path to the gocr binary is not configured yet.\n" "Please go to the Kooka configuration and enter the path manually." msgstr "" "Der Pfad zur ausführbaren Datei von gocr ist noch nicht festgelegt.\n" "Bitte geben Sie den Pfad in den Einstellungen von Kooka ein." #: kocrgocr.cpp:112 kocrocrad.cpp:123 kookapref.cpp:284 msgid "OCR Software Not Found" msgstr "Die OCR-Software wurde nicht gefunden" #: kocrgocr.cpp:117 kocrocrad.cpp:128 msgid "Not found" msgstr "Nicht gefunden" #: kocrgocr.cpp:121 msgid "Using GOCR binary: " msgstr "Diese ausführbare GOCR-Datei verwenden: " #: kocrgocr.cpp:132 msgid "&Gray level" msgstr "&Graustufen" #: kocrgocr.cpp:136 msgid "" "The numeric value gray pixels are \n" "considered to be black.\n" "\n" "Default is 160" msgstr "" "Der Wert, ab dem graue Pixel als\n" "schwarz angesehen werden.\n" "\n" "Standard ist 160" #: kocrgocr.cpp:138 msgid "&Dust size" msgstr "&Staubgröße" #: kocrgocr.cpp:142 msgid "" "Clusters smaller than this value\n" "will be considered to be dust and \n" "removed from the image.\n" "\n" "Default is 10" msgstr "" "Pixelgruppen, die kleiner als dieser Wert\n" "sind, werden als Staub angesehen und aus\n" "dem Bild entfernt.\n" "\n" "Standard ist 10" #: kocrgocr.cpp:144 msgid "&Space width" msgstr "&Zeichenabstand" #: kocrgocr.cpp:147 msgid "" "Spacing between characters.\n" "\n" "Default is 0 what means autodetection" msgstr "" "Zeichenabstand\n" "\n" "Standard ist 0 und bedeutet automatische Erkennung" #: kocrkadmos.cpp:85 msgid "KADMOS OCR/ICR" msgstr "KADMOS-OCR/ICR" #: kocrkadmos.cpp:90 msgid "" "This version of Kooka was linked with the KADMOS OCR/ICR engine, a " "commercial engine for optical character recognition.

Kadmos is a product " "of re Recognition AG
For more information about Kadmos OCR see http://www.rerecognition.com" msgstr "" "Diese Version von Kooka wurde mit dem KADMOS OCR/ICR-Modul gelinkt, " "einem kommerziellen Modul für die optische Zeichenerkennung.

Kadmos ist " "ein Produkt der re Recognition AG
Weitere Informationen über " "KADMOS OCR finden Sie unter http://www." "rerecognition.com" #: kocrkadmos.cpp:110 msgid "European Countries" msgstr "Europäische Länder" #: kocrkadmos.cpp:200 msgid "Czech Republic, Slovakia" msgstr "Tschechische Republik, Slowakei" #: kocrkadmos.cpp:204 msgid "Great Britain, USA" msgstr "Großbritannien, USA" #: kocrkadmos.cpp:247 kocrkadmos.cpp:329 msgid "" "The classifier files for KADMOS could not be found.\n" "OCR with KADMOS will not be possible!\n" "\n" "Change the OCR engine in the preferences dialog." msgstr "" "Die Klassifizierungsdatei für KADMOS kann nicht gefunden werden.\n" "Eine Texterkennung mit KADMOS ist nicht möglich!\n" "\n" "Ändern Sie das OCR-Modul im Dialog Einstellungen." #: kocrkadmos.cpp:250 kocrkadmos.cpp:332 msgid "Installation Error" msgstr "Installationsfehler" #: kocrkadmos.cpp:279 msgid "Please classify the font type and language of the text on the image:" msgstr "Bitte geben Sie den Schrifttyp und die Sprache des Bildtextes an:" #: kocrkadmos.cpp:282 msgid "Font Type Selection" msgstr "Schrifttyp-Auswahl" #: kocrkadmos.cpp:284 msgid "Machine print" msgstr "Machinendruck" #: kocrkadmos.cpp:285 msgid "Hand writing" msgstr "Handschrift" #: kocrkadmos.cpp:286 msgid "Norm font" msgstr "Norm-Zeichensatz" #: kocrkadmos.cpp:288 msgid "Country" msgstr "Land" #: kocrkadmos.cpp:301 msgid "OCR Modifier" msgstr "OCR-Modifizierer" #: kocrkadmos.cpp:304 msgid "Enable automatic noise reduction" msgstr "Automatische Rauschunterdrückung" #: kocrkadmos.cpp:305 msgid "Enable automatic scaling" msgstr "Automatische Skalierung" #: kocrkadmos.cpp:425 msgid "Classifier file %1 does not exist" msgstr "Klassifizierungsdatei %1 existiert nicht" #: kocrkadmos.cpp:432 msgid "Classifier file %1 is not readable" msgstr "Klassifizierungsdatei %1 ist nicht lesbar" #: kocrocrad.cpp:77 msgid "ocrad" msgstr "ocrad" #: kocrocrad.cpp:82 msgid "" "ocrad is a Free Software project for optical character recognition.

The " "author of ocrad is Antonio Diaz
For more information about ocrad " "see http://www.gnu." "org/software/ocrad/ocrad.html

Images should be scanned in black/white " "mode for ocrad.
Best results are achieved if the characters are at least " "20 pixels high.

Problems arise, as usual, with very bold or very light or " "broken characters, the same with merged character groups." msgstr "" "ocrad ist ein freies Softwareprojekt zur optischen Zeichenerkennung.

Der " "Autor von ocrad ist Antonio Diaz
Weitere Informationen über ocrad " "finden Sie unter http://www.gnu.org/software/ocrad/ocrad.html

Mit ocrad sollten " "Bilder im Schwarz/Weiß-Modus gescannt werden.
Die besten Ergebnisse " "erzielen Sie, wenn die Zeichenhöhe mindestens 20 Pixel beträgt.

Probleme " "gibt es wie üblich bei sehr breiten, sehr schmalen oder unterbrochenen " "Zeichen und mit zusammenhängenden Zeichen." #: kocrocrad.cpp:121 msgid "" "The path to the ocrad binary is not configured yet.\n" "Please go to the Kooka configuration and enter the path manually." msgstr "" "Der Pfad zur ausführbaren Datei ocrad ist noch nicht eingestellt.\n" "Bitte rufen Sie die Einstellungen von Kooka auf und setzen Sie den Pfad " "manuell." #: kocrocrad.cpp:140 msgid "OCRAD layout analysis mode: " msgstr "OCRAD Layout Analysemodus: " #: kocrocrad.cpp:142 msgid "No Layout Detection" msgstr "Keine Layouterkennung" #: kocrocrad.cpp:143 msgid "Column Detection" msgstr "Spaltenerkennung" #: kocrocrad.cpp:144 msgid "Full Layout Detection" msgstr "Erkennung des gesamten Layouts" #: kocrocrad.cpp:152 msgid "Using ocrad binary: " msgstr "Pfad zur ausführbaren Datei ocrad: " #: kocrocrad.cpp:239 msgid "Version: " msgstr "Version: " #: kooka.cpp:97 msgid "TDE Scanning" msgstr "TDE-Scannen" #: kooka.cpp:140 msgid "&OCR Image..." msgstr "&Zeichenerkennung (OCR) für das Bild ..." #: kooka.cpp:144 msgid "O&CR on Selection..." msgstr "Z&eichenerkennung (OCR) für die Auswahl ..." #: kooka.cpp:149 msgid "Scale to W&idth" msgstr "An &Breite anpassen" #: kooka.cpp:154 msgid "Scale to &Height" msgstr "An &Höhe anpassen" #: kooka.cpp:159 msgid "Original &Size" msgstr "&Originalgröße" #: kooka.cpp:169 kooka.cpp:172 msgid "Keep &Zoom Setting" msgstr "&Vergrößerungsfaktor merken" #: kooka.cpp:182 msgid "Set Zoom..." msgstr "Vergrößerung einstellen ..." #: kooka.cpp:187 msgid "Create From Selectio&n" msgstr "Aus Auswahl er&zeugen" #: kooka.cpp:191 msgid "Mirror Image &Vertically" msgstr "Bild &vertikal spiegeln" #: kooka.cpp:195 msgid "&Mirror Image Horizontally" msgstr "Bild horizontal &spiegeln" #: kooka.cpp:199 msgid "Mirror Image &Both Directions" msgstr "Bild in beide &Richtungen spiegeln" #: kooka.cpp:203 msgid "Open Image in &Graphic Application..." msgstr "Bild in &Grafikprogramm öffnen ..." #: kooka.cpp:207 msgid "&Rotate Image Clockwise" msgstr "&Drehen im Uhrzeigersinn" #: kooka.cpp:212 msgid "Rotate Image Counter-Clock&wise" msgstr "D&rehen gegen den Uhrzeigersinn" #: kooka.cpp:217 msgid "Rotate Image 180 &Degrees" msgstr "Dr&ehen um 180 Grad" #: kooka.cpp:223 msgid "&Create Folder..." msgstr "&Ordner erstellen ..." #: kooka.cpp:228 msgid "&Save Image..." msgstr "Bild &speichern ..." #: kooka.cpp:233 msgid "&Import Image..." msgstr "&Bild importieren ..." #: kooka.cpp:238 msgid "&Delete Image" msgstr "Bild &löschen" #: kooka.cpp:243 msgid "&Unload Image" msgstr "Bild s&chließen" #: kooka.cpp:250 msgid "&Load Scan Parameters" msgstr "&Scan-Parameter laden" #: kooka.cpp:254 msgid "Save &Scan Parameters" msgstr "Scan-&Parameter speichern" #: kooka.cpp:259 msgid "Select Scan Device" msgstr "Einlesegerät auswählen" #: kooka.cpp:263 msgid "Enable All Warnings && Messages" msgstr "Alle Warnungen && Meldungen einschalten" #: kooka.cpp:268 msgid "Save OCR Res&ult Text" msgstr "&Ergebnis der OCR als Text abspeichern" #: kooka.cpp:460 msgid "All messages and warnings will now be shown." msgstr "Alle Nachrichten und Warnungen werden ab jetzt angezeigt." #: kookapref.cpp:59 msgid "Preferences" msgstr "Einstellungen" #: kookapref.cpp:89 msgid "OCR Engine to Use" msgstr "Verwendetes OCR-Modul" #: kookapref.cpp:90 msgid "GOCR engine" msgstr "GOCR-Modul" #: kookapref.cpp:91 msgid "KADMOS engine" msgstr "KADMOS-Modul" #: kookapref.cpp:92 msgid "OCRAD engine" msgstr "OCRAD-Modul" #: kookapref.cpp:101 msgid "GOCR OCR" msgstr "GOCR OCR" #: kookapref.cpp:120 msgid "OCRAD OCR" msgstr "OCRAD OCR" #: kookapref.cpp:139 msgid "KADMOS OCR" msgstr "KADMOS OCR" #: kookapref.cpp:142 msgid "The KADMOS OCR engine is available" msgstr "Das KADMOS OCR-Modul ist verfügbar" #: kookapref.cpp:147 msgid "The KADMOS OCR engine is not available in this version of Kooka" msgstr "Das KADMOS OCR-Modul ist in dieser Version von Kooka nicht verfügbar" #: kookapref.cpp:183 msgid "Select the %1 binary to use:" msgstr "Wählen Sie die ausführbare Datei für %1:" #: kookapref.cpp:188 msgid "" "Enter the path to %1, the optical-character-recognition command line tool." msgstr "Geben Sie den Pfad zu %1 ein, dem Programm für die Schrifterkennung." #: kookapref.cpp:282 msgid "" "The path does not lead to a valid binary.\n" "Please check your installation and/or install the program." msgstr "" "Der Pfad führt nicht zu einer gültigen ausführbaren Datei.\n" "Bitte überprüfen Sie Ihre Installation und/oder\n" "installieren Sie das entsprechende Programm." #: kookapref.cpp:293 msgid "" "The program exists, but is not executable.\n" "Please check your installation and/or install the binary properly." msgstr "" "Die gefundene Programmdatei ist nicht ausführbar.\n" "Bitte überprüfen Sie Ihre Installation und/oder\n" "installieren Sie die ausführbare Datei korrekt." #: kookapref.cpp:295 msgid "OCR Software Not Executable" msgstr "Die OCR-Software ist nicht ausführbar" #: kookapref.cpp:311 msgid "Startup" msgstr "Programmstart" #: kookapref.cpp:311 msgid "Kooka Startup Preferences" msgstr "Start-Einstellungen" #: kookapref.cpp:315 msgid "Note that changing these options will affect Kooka's next start!" msgstr "" "Bitte beachten Sie, dass diese Einstellungen erst beim nächsten Start von " "Kooka aktiv werden." #: kookapref.cpp:318 msgid "Query network for available scanners" msgstr "Im Netzwerk nach verfügbaren Einlesegeräten suchen" #: kookapref.cpp:321 msgid "" "Check this if you want a network query for available scanners.\n" "Note that this does not mean a query over the entire network but only the " "stations configured for SANE!" msgstr "" "Wählen Sie diese Option aus, wenn Sie im Netzwerk nach Einlesegeräten suchen " "möchten.\n" "Bitte beachten Sie, dass dabei nur Rechner abgefragt werden, die für die " "Verwendung von SANE eingerichtet sind!" #: kookapref.cpp:326 msgid "Show the scanner selection box on next startup" msgstr "Beim nächsten Start das Auswahlfeld für Einlesegeräte anzeigen" #: kookapref.cpp:329 msgid "" "Check this if you once checked 'do not show the scanner selection on " "startup',\n" "but you want to see it again." msgstr "" "Markieren Sie diese Einstellung, wenn Sie zuvor \"Beim Start kein " "Einlesegerät auswählen\" eingestellt hatten,\n" "aber dieses Auswahlmöglichkeit jetzt wieder einschalten möchten." #: kookapref.cpp:334 msgid "Load the last image into the viewer on startup" msgstr "Zuletzt geöffnetes Bild beim Programmstart laden" #: kookapref.cpp:337 msgid "" "Check this if you want Kooka to load the last selected image into the viewer " "on startup.\n" "If your images are large, that might slow down Kooka's start." msgstr "" "Wählen Sie diese Option aus, wenn beim Programmstart das zuletzt bearbeitete " "Bild geladen werden soll.\n" "Beachten Sie, dass dies den Programmstart von Kooka verzögern kann." #: kookapref.cpp:353 msgid "Image Saving" msgstr "Bildspeicherung" #: kookapref.cpp:353 msgid "Configure Image Save Assistant" msgstr "Einstellungen für den Bildablage-Assistent" #: kookapref.cpp:358 msgid "Always display image save assistant" msgstr "Ablage-Assistent immer anzeigen" #: kookapref.cpp:361 msgid "" "Check this if you want to see the image save assistant even if there is a " "default format for the image type." msgstr "" "Markieren Sie diese Einstellung, wenn der Ablage-Assistenten auch bei " "bereits eingestelltem Standard-Speicherformat angezeigt werden soll." #: kookapref.cpp:364 msgid "Ask for filename when saving file" msgstr "Beim Speichern nach Dateinamen fragen" #: kookapref.cpp:367 msgid "" "Check this if you want to enter a filename when an image has been scanned." msgstr "" "Ist diese Einstellung aktiviert, können Sie nach dem Einlesen eines Bildes " "einen Dateinamen eingeben." #: kookapref.cpp:379 msgid "Thumbnail View" msgstr "Minibild-Ansicht" #: kookapref.cpp:379 msgid "Thumbnail Gallery View" msgstr "Minibild-Galerieansicht" #: kookapref.cpp:383 msgid "" "Here you can configure the appearance of the thumbnail view of your scan " "picture gallery." msgstr "" "Hier können Sie das Erscheinungsbild der Minibild-Ansicht in Ihrem Galerie-" "Ordner einstellen." #: kookapref.cpp:392 msgid "Thumbview Background" msgstr "Hintergrund für Minibild-Ansicht" #: kookapref.cpp:393 msgid "Select background image:" msgstr "Hintergrundbild auswählen:" #: kookapref.cpp:400 msgid "Thumbnail Size" msgstr "Minibild-Größe" #: kookapref.cpp:401 msgid "Thumbnail Frame" msgstr "Minibild-Rahmen" #: kookapref.cpp:408 msgid "Thumbnail maximum &width:" msgstr "Maximale Minibild-&Breite:" #: kookapref.cpp:414 msgid "Thumbnail maximum &height:" msgstr "Maximale Minibild-&Höhe:" #: kookapref.cpp:426 msgid "Thumbnail &frame width:" msgstr "&Rahmenbreite des Minibildes:" #: kookapref.cpp:431 msgid "Frame color &1: " msgstr "Rahmenfarbe &1: " #: kookapref.cpp:435 msgid "Frame color &2: " msgstr "Rahmenfarbe &2: " #: kookapref.cpp:504 msgid "" "The OCR engine settings were changed.\n" "Note that Kooka needs to be restarted to change the OCR engine." msgstr "" "Die Einstellungen für das OCR-Modul wurden geändert.\n" "Beachten Sie, dass Kooka nach einem Wechsel des OCR-Moduls neu gestartet " "werden muss." #: kookapref.cpp:506 msgid "OCR Engine Change" msgstr "OCR-Modulwechsel" #: kookaview.cpp:105 msgid "Image Viewer" msgstr "Bildbetrachter" #: kookaview.cpp:120 msgid "Image View" msgstr "Bildbetrachter" #: kookaview.cpp:126 msgid "Thumbnails" msgstr "Minibilder" #: kookaview.cpp:141 scanpackager.cpp:130 msgid "Gallery" msgstr "Galerie" #: kookaview.cpp:160 msgid "Gallery Folders" msgstr "Galerie-Ordner" #: kookaview.cpp:166 msgid "Gallery:" msgstr "Galerie:" #: kookaview.cpp:189 msgid "Scan Parameter" msgstr "Scan-Parameter" #: kookaview.cpp:208 msgid "Scan Preview" msgstr "Vorschau" #: kookaview.cpp:227 msgid "OCR Result Text" msgstr "OCR-Ergebnistext" #: kookaview.cpp:475 #, c-format msgid "Print %1" msgstr "%1 drucken" #: kookaview.cpp:532 msgid "Starting OCR on selection" msgstr "Zeichenerkennung (OCR) für die Auswahl gestartet" #: kookaview.cpp:546 msgid "Starting OCR on the entire image" msgstr "Zeichenerkennung (OCR) für das gesamte Bild gestartet" #: kookaview.cpp:595 msgid "" "Could not start OCR-Process.\n" "Probably there is already one running." msgstr "" "Die Zeichenerkennung lässt sich nicht starten.\n" "Wahrscheinlich läuft bereits ein Zeichenerkennungsprozess." #: kookaview.cpp:690 msgid "Create new image from selection" msgstr "Neues Bild aus Auswahl erzeugen" #: kookaview.cpp:716 msgid "Rotate image 90 degrees" msgstr "Bild um 90 Grad drehen" #: kookaview.cpp:720 msgid "Rotate image 180 degrees" msgstr "Bild um 180 Grad drehen" #: kookaview.cpp:725 msgid "Rotate image -90 degrees" msgstr "Bild um -90 Grad drehen" #: kookaview.cpp:761 msgid "Mirroring image vertically" msgstr "Bild wird senkrecht gespiegelt" #: kookaview.cpp:765 msgid "Mirroring image horizontally" msgstr "Bild wird waagerecht gespiegelt" #: kookaview.cpp:769 msgid "Mirroring image in both directions" msgstr "Bild wird in beide Richtungen gespiegelt" #: kookaview.cpp:916 #, c-format msgid "Loading %1" msgstr "Laden von %1" #: kookaview.cpp:930 msgid "Storing image changes" msgstr "Speichern der Änderungen" #: kookaview.cpp:936 msgid "Can not save image, it is write protected!" msgstr "" "Das Bild kann nicht gespeichert werden. Die Datei ist schreibgeschützt!" #: kookaview.cpp:1052 msgid "Tool Views" msgstr "Werkzeugansicht" #: kookaview.cpp:1054 msgid "Show Image Viewer" msgstr "Bildbetrachter anzeigen" #: kookaview.cpp:1058 msgid "Show Preview" msgstr "Vorschau anzeigen" #: kookaview.cpp:1062 msgid "Show Recent Gallery Folders" msgstr "zuletzt geöffnete Galerie-Ordner anzeigen" #: kookaview.cpp:1065 msgid "Show Gallery" msgstr "Galerie anzeigen" #: kookaview.cpp:1069 msgid "Show Thumbnail Window" msgstr "Minibild-Fenster anzeigen" #: kookaview.cpp:1073 msgid "Show Scan Parameters" msgstr "Scan-Parameter anzeigen" #: kookaview.cpp:1077 msgid "Show OCR Results" msgstr "OCR-Ergebnis anzeigen" #: ksaneocr.cpp:207 msgid "" "This version of Kooka was not compiled with KADMOS support.\n" "Please select another OCR engine in Kooka's options dialog." msgstr "" "Diese Version von Kooka wurde ohne KADMOS-Unterstützung kompiliert.\n" "Bitte wählen Sie im Dialog \"Einstellungen\" ein anderes OCR-Modul." #: ksaneocr.cpp:281 msgid "Kooka OCR Dictionary Check" msgstr "Kooka OCR-Wörterbuch-Prüfung" #: ksaneocr.cpp:362 msgid "The OCR-process was stopped." msgstr "Der OCR-Vorgang wurde angehalten." #: ksaneocr.cpp:457 msgid "Parsing of the OCR Result File failed:" msgstr "Das Einlesen der Ausgabedatei der Texterkennung ist fehlgeschlagen:" #: ksaneocr.cpp:458 msgid "Parse Problem" msgstr "Problem beim Einlesen" #: ksaneocr.cpp:594 msgid "" "The classifier file necessary for OCR cannot be loaded: %1;\n" "OCR with the KADMOS engine is not possible." msgstr "" "Die für die OCR erforderliche Klassifizierungsdatei kann nicht geladen " "werden: %1\n" "Die Texterkennung mit dem KADMOS-Modul ist nicht möglich." #: ksaneocr.cpp:596 msgid "KADMOS Installation Problem" msgstr "KADMOS Installationsproblem" #: ksaneocr.cpp:607 msgid "The KADMOS OCR system could not be started:\n" msgstr "Das KADMOS OCR-System kann nicht gestartet werden:\n" #: ksaneocr.cpp:609 msgid "" "\n" "Please check the configuration." msgstr "" "\n" "Bitte überprüfen Sie die Einrichtung." #: ksaneocr.cpp:610 msgid "KADMOS Failure" msgstr "KADMOS Fehler" #: ksaneocr.cpp:817 msgid "The orf %1 does not exist." msgstr "Der Orf %1 existiert nicht." #: ksaneocr.cpp:821 #, c-format msgid "Permission denied on file %1." msgstr "Der Zugriff auf die Datei %1 wurde verweigert." #: ksaneocr.cpp:1386 msgid "" "Spell-checking cannot be started on this system.\n" "Please check the configuration" msgstr "" "Die Rechtschreibprüfung kann auf diesem System nicht gestartet werden.\n" "Bitte übeprüfen Sie die Einrichtung." #: ksaneocr.cpp:1388 msgid "Spell-Check" msgstr "Rechtschreibprüfung" #: main.cpp:47 msgid "" "Kooka is a TDE application which provides access to scanner hardware\n" "using the SANE library.\n" "\n" "Kooka helps you scan, save your image in the correct image format\n" "and perform Optical Character Recognition on it, using gocr, Joerg\n" "Schulenburg's and friends' Open Source ocr program." msgstr "" #: main.cpp:54 msgid "" "This program is distributed under the terms of the GPL v2 as publishec by\n" "the Free Software Foundation\n" "\n" "As a special exception, permission is given to link this program\n" "with any version of the KADMOS ocr/icr engine of reRecognition GmbH,\n" "Kreuzlingen and distribute the resulting executable without\n" "including the source code for KADMOS in the source distribution.\n" "\n" "As a special exception, permission is given to link this program\n" "with any edition of TQt, and distribute the resulting executable,\n" "without including the source code for TQt in the source distribution.\n" msgstr "" #: main.cpp:67 msgid "The SANE compatible device specification (e.g. umax:/dev/sg0)" msgstr "SANE-kompatible Bezeichnung für das Gerät (z. B. umax:/dev/sg0)" #: main.cpp:68 msgid "Gallery mode - do not connect to scanner" msgstr "Galeriemodus - nicht mit dem Einlesegerät verbinden" #: main.cpp:76 msgid "Kooka" msgstr "Kooka" #: main.cpp:79 msgid "developer" msgstr "Entwickler" #: main.cpp:80 msgid "graphics, web" msgstr "Grafiken, Internet" #: ocrresedit.cpp:135 msgid "Save OCR Result Text" msgstr "Ausgabetext der OCR speichern" #: scanpackager.cpp:79 msgid "Image Name" msgstr "Bildname" #: scanpackager.cpp:82 msgid "Size" msgstr "Größe" #: scanpackager.cpp:86 msgid "Format" msgstr "Format" #: scanpackager.cpp:151 msgid "Kooka Gallery" msgstr "Kooka-Galerie" #: scanpackager.cpp:197 #, c-format msgid "" "_n: one item\n" "%n items" msgstr "" "Ein Eintrag\n" "%n Einträge" #: scanpackager.cpp:248 msgid "%1 x %2" msgstr "%1 x %2" #: scanpackager.cpp:399 msgid "" "You entered a file extension that differs from the existing one. That is not " "yet possible. Converting 'on the fly' is planned for a future release.\n" "Kooka corrects the extension." msgstr "" "Sie haben eine Dateierweiterung angegeben, die mit der existierenden nicht " "übereinstimmt. Das ist momentan noch nicht möglich. Eine Konvertierung zur " "Laufzeit ist für eine spätere Programmversion geplant.\n" "Die Dateierweiterung wird zurückgesetzt." #: scanpackager.cpp:401 msgid "On the Fly Conversion" msgstr "Konvertierung zur Laufzeit" #: scanpackager.cpp:603 #, c-format msgid "Sub-image %1" msgstr "Unter-Bild %1" #: scanpackager.cpp:752 scanpackager.cpp:822 msgid "" "Cannot write this image format.\n" "Image will not be saved!" msgstr "" "Dieses Dateiformat kann nicht verarbeitet werden.\n" "Das Bild wird nicht gespeichert." #: scanpackager.cpp:753 scanpackager.cpp:758 scanpackager.cpp:765 #: scanpackager.cpp:823 scanpackager.cpp:828 msgid "Save Error" msgstr "Fehler beim Speichern" #: scanpackager.cpp:757 scanpackager.cpp:827 msgid "" "Image file is write protected.\n" "Image will not be saved!" msgstr "" "Die Bilddatei ist schreibgeschützt.\n" "Die Speicherung des Bildes ist nicht möglich." #: scanpackager.cpp:763 msgid "" "Cannot save the image, because the file is local.\n" "Kooka will support other protocols later." msgstr "" "Das Bild kann nicht gespeichert werden, da es sich um eine lokale\n" "Datei handelt. Kooka wird andere Protokolle erst in einer zukünftigen " "Version unterstützen." #: scanpackager.cpp:802 msgid "Incoming/" msgstr "Eingang/" #: scanpackager.cpp:864 msgid "%1 images" msgstr "%1 Bilder" #: scanpackager.cpp:983 msgid "All Files" msgstr "Alle Dateien" #: scanpackager.cpp:1020 msgid "Import Image File to Gallery" msgstr "Bilddatei in Galerie importieren" #: scanpackager.cpp:1061 msgid "Canceled by user" msgstr "Abbruch durch Benutzer" #: scanpackager.cpp:1136 msgid "" "Do you really want to delete this image?\n" "It cannot be restored!" msgstr "" "Möchten Sie dieses Bild wirklich löschen?\n" "Die Datei lässt sich nicht wiederherstellen." #: scanpackager.cpp:1139 msgid "" "Do you really want to delete the folder %1\n" "and all the images inside?" msgstr "" "Möchten Sie den Ordner %1\n" "und alle darin enthaltenen Bilder wirklich löschen?" #: scanpackager.cpp:1141 msgid "Delete Collection Item" msgstr "Objekt aus der Sammlung löschen" #: scanpackager.cpp:1170 msgid "New Folder" msgstr "Neuer Ordner" #: scanpackager.cpp:1171 msgid "Please enter a name for the new folder:" msgstr "Bitte geben Sie einen Namen für den neuen Ordner ein:" #: scanpackager.cpp:1217 #, c-format msgid "image %1" msgstr "Bild %1" #: kookaui.rc:12 #, no-c-format msgid "&Image" msgstr "&Bild" #: kookaui.rc:43 #, no-c-format msgid "Image Viewer Toolbar" msgstr "Werkzeugleiste für Bildbetrachter" #~ msgid "http://kooka.kde.org" #~ msgstr "http://kooka.kde.org" #, fuzzy #~ msgid "&File" #~ msgstr "Dateiname" #~ msgid "%1 MB" #~ msgstr "%1 MB" #~ msgid "%1 kB" #~ msgstr "%1 KB"