# translation of ksysguard.po to British English
# Copyright (C) 2002,2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# Malcolm Hunter <malcolm.hunter@gmx.co.uk>, 2002,2003, 2004, 2005, 2006.
# Andrew Coles <andrew_coles@yahoo.co.uk>, 2004, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: ksysguard\n"
"POT-Creation-Date: 2019-01-13 18:47+0100\n"
"PO-Revision-Date: 2006-03-12 17:23+0000\n"
"Last-Translator: Malcolm Hunter <malcolm.hunter@gmx.co.uk>\n"
"Language-Team: British English <kde-en-gb@kde.me.uk>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.10.2\n"

#: _translatorinfo:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Ken Knight,Dwayne Bailey"

#: _translatorinfo:2
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "anarchist_tomato@herzeleid.net,dwayne@translate.org.za"

#: SystemLoad.sgrd:5
msgid "CPU Load"
msgstr "CPU Load"

#: SystemLoad.sgrd:10
msgid "Load Average (1 min)"
msgstr "Load Average (1 min)"

#: SystemLoad.sgrd:13
msgid "Physical Memory"
msgstr "Physical Memory"

#: SystemLoad.sgrd:21
msgid "Swap Memory"
msgstr "Swap Memory"

#: KSysGuardApplet.xml:5
msgid "CPU"
msgstr "CPU"

#: KSysGuardApplet.xml:10
msgid "Mem"
msgstr "Mem"

#~ msgid "Select Display Type"
#~ msgstr "Select Display Type"

#~ msgid "&Signal Plotter"
#~ msgstr "&Signal Plotter"

#~ msgid "&Multimeter"
#~ msgstr "&Multimeter"

#~ msgid "&Dancing Bars"
#~ msgstr "&Dancing Bars"

#~ msgid ""
#~ "The KSysGuard applet does not support displaying of this type of sensor. "
#~ "Please choose another sensor."
#~ msgstr ""
#~ "The KSysGuard applet does not support displaying of this type of sensor. "
#~ "Please choose another sensor."

#~ msgid "Cannot open the file %1."
#~ msgstr "Cannot open the file %1."

#~ msgid "The file %1 does not contain valid XML."
#~ msgstr "The file %1 does not contain valid XML."

#~ msgid ""
#~ "The file %1 does not contain a valid applet definition, which must have a "
#~ "document type 'KSysGuardApplet'."
#~ msgstr ""
#~ "The file %1 does not contain a valid applet definition, which must have a "
#~ "document type 'KSysGuardApplet'."

#~ msgid "Cannot save file %1"
#~ msgstr "Cannot save file %1"

#~ msgid "Drag sensors from the TDE System Guard into this cell."
#~ msgstr "Drag sensors from the TDE System Guard into this cell."

#~ msgid "Multimeter Settings"
#~ msgstr "Multimeter Settings"

#~ msgid "Name"
#~ msgstr "Name"

#~ msgid "PID"
#~ msgstr "PID"

#~ msgid "PPID"
#~ msgstr "PPID"

#~ msgid "UID"
#~ msgstr "UID"

#~ msgid "GID"
#~ msgstr "GID"

#~ msgid "Status"
#~ msgstr "Status"

#~ msgid "User%"
#~ msgstr "User%"

#~ msgid "System%"
#~ msgstr "System%"

#~ msgid "Nice"
#~ msgstr "Nice"

#~ msgid "VmSize"
#~ msgstr "VmSize"

#~ msgid "VmRss"
#~ msgstr "VmRss"

#~ msgid "Login"
#~ msgstr "Login"

#~ msgid "Command"
#~ msgstr "Command"

#~ msgid "All Processes"
#~ msgstr "All Processes"

#~ msgid "System Processes"
#~ msgstr "System Processes"

#~ msgid "User Processes"
#~ msgstr "User Processes"

#~ msgid "Own Processes"
#~ msgstr "Own Processes"

#~ msgid "&Tree"
#~ msgstr "&Tree"

#~ msgid "&Refresh"
#~ msgstr "&Refresh"

#~ msgid "&Kill"
#~ msgstr "&Kill"

#~ msgid "%1: Running Processes"
#~ msgstr "%1: Running Processes"

#~ msgid "You need to select a process first."
#~ msgstr "You need to select a process first."

#~ msgid ""
#~ "_n: Do you want to kill the selected process?\n"
#~ "Do you want to kill the %n selected processes?"
#~ msgstr ""
#~ "Do you want to kill the selected process?\n"
#~ "Do you want to kill the %n selected processes?"

#~ msgid "Kill Process"
#~ msgstr "Kill Process"

#~ msgid "Kill"
#~ msgstr "Kill"

#~ msgid "Do not ask again"
#~ msgstr "Do not ask again"

#~ msgid "Error while attempting to kill process %1."
#~ msgstr "Error while attempting to kill process %1."

#~ msgid "Insufficient permissions to kill process %1."
#~ msgstr "Insufficient permissions to kill process %1."

#~ msgid "Process %1 has already disappeared."
#~ msgstr "Process %1 has already disappeared."

#~ msgid "Invalid Signal."
#~ msgstr "Invalid Signal."

#~ msgid "Error while attempting to renice process %1."
#~ msgstr "Error while attempting to renice process %1."

#~ msgid "Insufficient permissions to renice process %1."
#~ msgstr "Insufficient permissions to renice process %1."

#~ msgid "Invalid argument."
#~ msgstr "Invalid argument."

#~ msgid "It is impossible to connect to '%1'."
#~ msgstr "It is impossible to connect to '%1'."

#~ msgid "Launch &System Guard"
#~ msgstr "Launch &System Guard"

#~ msgid "&Properties"
#~ msgstr "&Properties"

#~ msgid "&Remove Display"
#~ msgstr "&Remove Display"

#~ msgid "&Setup Update Interval..."
#~ msgstr "&Setup Update Interval..."

#~ msgid "&Continue Update"
#~ msgstr "&Continue Update"

#~ msgid "P&ause Update"
#~ msgstr "P&ause Update"

#~ msgid ""
#~ "<qt><p>This is a sensor display. To customize a sensor display click and "
#~ "hold the right mouse button on either the frame or the display box and "
#~ "select the <i>Properties</i> entry from the popup menu. Select <i>Remove</"
#~ "i> to delete the display from the worksheet.</p>%1</qt>"
#~ msgstr ""
#~ "<qt><p>This is a sensor display. To customise a sensor display click and "
#~ "hold the right mouse button on either the frame or the display box and "
#~ "select the <i>Properties</i> entry from the popup menu. Select <i>Remove</"
#~ "i> to delete the display from the worksheet.</p>%1</qt>"

#~ msgid "Drop Sensor Here"
#~ msgstr "Drop Sensor Here"

#~ msgid ""
#~ "This is an empty space in a worksheet. Drag a sensor from the Sensor "
#~ "Browser and drop it here. A sensor display will appear that allows you to "
#~ "monitor the values of the sensor over time."
#~ msgstr ""
#~ "This is an empty space in a worksheet. Drag a sensor from the Sensor "
#~ "Browser and drop it here. A sensor display will appear that allows you to "
#~ "monitor the values of the sensor over time."

#~ msgid "Sensor Logger Settings"
#~ msgstr "Sensor Logger Settings"

#~ msgid "Logging"
#~ msgstr "Logging"

#~ msgid "Timer Interval"
#~ msgstr "Timer Interval"

#~ msgid "Sensor Name"
#~ msgstr "Sensor Name"

#~ msgid "Host Name"
#~ msgstr "Host Name"

#~ msgid "Log File"
#~ msgstr "Log File"

#~ msgid "Sensor Logger"
#~ msgstr "Sensor Logger"

#~ msgid "&Remove Sensor"
#~ msgstr "&Remove Sensor"

#~ msgid "&Edit Sensor..."
#~ msgstr "&Edit Sensor..."

#~ msgid "St&op Logging"
#~ msgstr "St&op Logging"

#~ msgid "S&tart Logging"
#~ msgstr "S&tart Logging"

#~ msgid ""
#~ "_: process status\n"
#~ "running"
#~ msgstr "running"

#~ msgid ""
#~ "_: process status\n"
#~ "sleeping"
#~ msgstr "sleeping"

#~ msgid ""
#~ "_: process status\n"
#~ "disk sleep"
#~ msgstr "disk sleep"

#~ msgid ""
#~ "_: process status\n"
#~ "zombie"
#~ msgstr "zombie "

#~ msgid ""
#~ "_: process status\n"
#~ "stopped"
#~ msgstr "stopped"

#~ msgid ""
#~ "_: process status\n"
#~ "paging"
#~ msgstr "paging"

#~ msgid ""
#~ "_: process status\n"
#~ "idle"
#~ msgstr "idle"

#~ msgid "Remove Column"
#~ msgstr "Remove Column"

#~ msgid "Add Column"
#~ msgstr "Add Column"

#~ msgid "Help on Column"
#~ msgstr "Help on Column"

#~ msgid "Hide Column"
#~ msgstr "Hide Column"

#~ msgid "Show Column"
#~ msgstr "Show Column"

#~ msgid "Select All Processes"
#~ msgstr "Select All Processes"

#~ msgid "Unselect All Processes"
#~ msgstr "Unselect All Processes"

#~ msgid "Select All Child Processes"
#~ msgstr "Select All Child Processes"

#~ msgid "Unselect All Child Processes"
#~ msgstr "Unselect All Child Processes"

#~ msgid "SIGABRT"
#~ msgstr "SIGABRT"

#~ msgid "SIGALRM"
#~ msgstr "SIGALRM"

#~ msgid "SIGCHLD"
#~ msgstr "SIGCHLD"

#~ msgid "SIGCONT"
#~ msgstr "SIGCONT"

#~ msgid "SIGFPE"
#~ msgstr "SIGFPE"

#~ msgid "SIGHUP"
#~ msgstr "SIGHUP"

#~ msgid "SIGILL"
#~ msgstr "SIGILL"

#~ msgid "SIGINT"
#~ msgstr "SIGINT"

#~ msgid "SIGKILL"
#~ msgstr "SIGKILL"

#~ msgid "SIGPIPE"
#~ msgstr "SIGPIPE"

#~ msgid "SIGQUIT"
#~ msgstr "SIGQUIT"

#~ msgid "SIGSEGV"
#~ msgstr "SIGSEGV"

#~ msgid "SIGSTOP"
#~ msgstr "SIGSTOP"

#~ msgid "SIGTERM"
#~ msgstr "SIGTERM"

#~ msgid "SIGTSTP"
#~ msgstr "SIGTSTP"

#~ msgid "SIGTTIN"
#~ msgstr "SIGTTIN"

#~ msgid "SIGTTOU"
#~ msgstr "SIGTTOU"

#~ msgid "SIGUSR1"
#~ msgstr "SIGUSR1"

#~ msgid "SIGUSR2"
#~ msgstr "SIGUSR2"

#~ msgid "Send Signal"
#~ msgstr "Send Signal"

#~ msgid "Renice Process..."
#~ msgstr "Renice Process..."

#~ msgid ""
#~ "_n: Do you really want to send signal %1 to the selected process?\n"
#~ "Do you really want to send signal %1 to the %n selected processes?"
#~ msgstr ""
#~ "Do you really want to send signal %1 to the selected process?\n"
#~ "Do you really want to send signal %1 to the %n selected processes?"

#~ msgid "Send"
#~ msgstr "Send"

#~ msgid "Renice Process"
#~ msgstr "Renice Process"

#~ msgid ""
#~ "You are about to change the scheduling priority of\n"
#~ "process %1. Be aware that only the Superuser (root)\n"
#~ "can decrease the nice level of a process. The lower\n"
#~ "the number is the higher the priority.\n"
#~ "\n"
#~ "Please enter the desired nice level:"
#~ msgstr ""
#~ "You are about to change the scheduling priority of\n"
#~ "process %1. Be aware that only the Superuser (root)\n"
#~ "can decrease the nice level of a process. The lower\n"
#~ "the number is the higher the priority.\n"
#~ "\n"
#~ "Please enter the desired nice level:"

#~ msgid "Foreground color:"
#~ msgstr "Foreground colour:"

#~ msgid "Background color:"
#~ msgstr "Background colour:"

#~ msgid "Edit BarGraph Preferences"
#~ msgstr "Edit BarGraph Preferences"

#~ msgid "Range"
#~ msgstr "Range"

#~ msgid "Title"
#~ msgstr "Title"

#~ msgid "Enter the title of the display here."
#~ msgstr "Enter the title of the display here."

#~ msgid "Display Range"
#~ msgstr "Display Range"

#~ msgid "Minimum value:"
#~ msgstr "Minimum value:"

#, fuzzy
#~ msgid ""
#~ "Enter the minimum value for the display here. If both values are 0, "
#~ "automatic range detection is enabled."
#~ msgstr ""
#~ "Enter the minimum value for the display here. If both values are 0 "
#~ "automatic range detection is enabled."

#~ msgid "Maximum value:"
#~ msgstr "Maximum value:"

#, fuzzy
#~ msgid ""
#~ "Enter the maximum value for the display here. If both values are 0, "
#~ "automatic range detection is enabled."
#~ msgstr ""
#~ "Enter the maximum value for the display here. If both values are 0 "
#~ "automatic range detection is enabled."

#~ msgid "Alarms"
#~ msgstr "Alarms"

#~ msgid "Alarm for Minimum Value"
#~ msgstr "Alarm for Minimum Value"

#~ msgid "Enable alarm"
#~ msgstr "Enable alarm"

#~ msgid "Enable the minimum value alarm."
#~ msgstr "Enable the minimum value alarm."

#~ msgid "Lower limit:"
#~ msgstr "Lower limit:"

#~ msgid "Alarm for Maximum Value"
#~ msgstr "Alarm for Maximum Value"

#~ msgid "Enable the maximum value alarm."
#~ msgstr "Enable the maximum value alarm."

#~ msgid "Upper limit:"
#~ msgstr "Upper limit:"

#~ msgid "Look"
#~ msgstr "Look"

#~ msgid "Normal bar color:"
#~ msgstr "Normal bar colour:"

#~ msgid "Out-of-range color:"
#~ msgstr "Out-of-range colour:"

#~ msgid "Font size:"
#~ msgstr "Font size:"

#~ msgid ""
#~ "This determines the size of the font used to print a label underneath the "
#~ "bars. Bars are automatically suppressed if text becomes too large, so it "
#~ "is advisable to use a small font size here."
#~ msgstr ""
#~ "This determines the size of the font used to print a label underneath the "
#~ "bars. Bars are automatically suppressed if text becomes too large, so it "
#~ "is advisable to use a small font size here."

#~ msgid "Sensors"
#~ msgstr "Sensors"

#~ msgid "Host"
#~ msgstr "Host"

#~ msgid "Sensor"
#~ msgstr "Sensor"

#~ msgid "Label"
#~ msgstr "Label"

#~ msgid "Unit"
#~ msgstr "Unit"

#~ msgid "Edit..."
#~ msgstr "Edit..."

#~ msgid "Push this button to configure the label."
#~ msgstr "Push this button to configure the label."

#~ msgid "Push this button to delete the sensor."
#~ msgstr "Push this button to delete the sensor."

#~ msgid "Label of Bar Graph"
#~ msgstr "Label of Bar Graph"

#~ msgid "Enter new label:"
#~ msgstr "Enter new label:"

#~ msgid "Signal Plotter Settings"
#~ msgstr "Signal Plotter Settings"

#~ msgid "Style"
#~ msgstr "Style"

#~ msgid "Title:"
#~ msgstr "Title:"

#~ msgid "Graph Drawing Style"
#~ msgstr "Graph Drawing Style"

#~ msgid "Basic polygons"
#~ msgstr "Basic polygons"

#~ msgid "Original - single line per data point"
#~ msgstr "Original - single line per data point"

#~ msgid "Scales"
#~ msgstr "Scales"

#~ msgid "Vertical Scale"
#~ msgstr "Vertical Scale"

#~ msgid "Automatic range detection"
#~ msgstr "Automatic range detection"

#~ msgid ""
#~ "Check this box if you want the display range to adapt dynamically to the "
#~ "currently displayed values; if you do not check this, you have to specify "
#~ "the range you want in the fields below."
#~ msgstr ""
#~ "Tick this box if you want the display range to adapt dynamically to the "
#~ "currently displayed values; if you do not tick this, you have to specify "
#~ "the range you want in the fields below."

#~ msgid "Horizontal Scale"
#~ msgstr "Horizontal Scale"

#~ msgid "pixel(s) per time period"
#~ msgstr "pixel(s) per time period"

#~ msgid "Grid"
#~ msgstr "Grid"

#~ msgid "Lines"
#~ msgstr "Lines"

#~ msgid "Vertical lines"
#~ msgstr "Vertical lines"

#~ msgid ""
#~ "Check this to activate the vertical lines if display is large enough."
#~ msgstr ""
#~ "Tick this to activate the vertical lines if display is large enough."

#~ msgid "Distance:"
#~ msgstr "Distance:"

#~ msgid "Enter the distance between two vertical lines here."
#~ msgstr "Enter the distance between two vertical lines here."

#~ msgid "Vertical lines scroll"
#~ msgstr "Vertical lines scroll"

#~ msgid "Horizontal lines"
#~ msgstr "Horizontal lines"

#~ msgid "Check this to enable horizontal lines if display is large enough."
#~ msgstr "Tick this to enable horizontal lines if display is large enough."

#~ msgid "Count:"
#~ msgstr "Count:"

#~ msgid "Enter the number of horizontal lines here."
#~ msgstr "Enter the number of horizontal lines here."

#~ msgid "Text"
#~ msgstr "Text"

#~ msgid "Labels"
#~ msgstr "Labels"

#~ msgid ""
#~ "Check this box if horizontal lines should be decorated with the values "
#~ "they mark."
#~ msgstr ""
#~ "Tick this box if horizontal lines should be decorated with the values "
#~ "they mark."

#~ msgid "Top bar"
#~ msgstr "Top bar"

#~ msgid ""
#~ "Check this to active the display title bar. This is probably only useful "
#~ "for applet displays. The bar is only visible if the display is large "
#~ "enough."
#~ msgstr ""
#~ "Tick this to active the display title bar. This is probably only useful "
#~ "for applet displays. The bar is only visible if the display is large "
#~ "enough."

#~ msgid "Colors"
#~ msgstr "Colours"

#~ msgid "Vertical lines:"
#~ msgstr "Vertical lines:"

#~ msgid "Horizontal lines:"
#~ msgstr "Horizontal lines:"

#~ msgid "Background:"
#~ msgstr "Background:"

#~ msgid "Set Color..."
#~ msgstr "Set Colour..."

#~ msgid ""
#~ "Push this button to configure the color of the sensor in the diagram."
#~ msgstr ""
#~ "Push this button to configure the colour of the sensor in the diagram."

#~ msgid "Move Up"
#~ msgstr "Move Up"

#~ msgid "Move Down"
#~ msgstr "Move Down"

#~ msgid "List View Settings"
#~ msgstr "List View Settings"

#, fuzzy
#~ msgid "System Guard Settings"
#~ msgstr "KSysGuard Applet Settings"

#~ msgid "Number of displays:"
#~ msgstr "Number of displays:"

#~ msgid "Size ratio:"
#~ msgstr "Size ratio:"

#~ msgid "%"
#~ msgstr "%"

#~ msgid "Update interval:"
#~ msgstr "Update interval:"

#~ msgid " sec"
#~ msgstr " sec"

#~ msgid ""
#~ "The file %1 does not contain a valid worksheet definition, which must "
#~ "have a document type 'KSysGuardWorkSheet'."
#~ msgstr ""
#~ "The file %1 does not contain a valid worksheet definition, which must "
#~ "have a document type 'KSysGuardWorkSheet'."

#~ msgid "The file %1 has an invalid worksheet size."
#~ msgstr "The file %1 has an invalid worksheet size."

#~ msgid "The clipboard does not contain a valid display description."
#~ msgstr "The clipboard does not contain a valid display description."

#~ msgid "&BarGraph"
#~ msgstr "&BarGraph"

#~ msgid "S&ensorLogger"
#~ msgstr "S&ensorLogger"

#~ msgid "Log File Settings"
#~ msgstr "Log File Settings"

#~ msgid "Select Font..."
#~ msgstr "Select Font..."

#~ msgid "Filter"
#~ msgstr "Filter"

#~ msgid "&Add"
#~ msgstr "&Add"

#~ msgid "&Change"
#~ msgstr "&Change"

#~ msgid "Text color:"
#~ msgstr "Text colour:"

#~ msgid "Alarm color:"
#~ msgstr "Alarm colour:"

#~ msgid "&Show unit"
#~ msgstr "&Show unit"

#~ msgid "Enable this to append the unit to the title of the display."
#~ msgstr "Enable this to append the unit to the title of the display."

#~ msgid "E&nable alarm"
#~ msgstr "E&nable alarm"

#~ msgid "&Enable alarm"
#~ msgstr "&Enable alarm"

#~ msgid "Normal digit color:"
#~ msgstr "Normal digit colour:"

#~ msgid "Alarm digit color:"
#~ msgstr "Alarm digit colour:"

#~ msgid "Grid color:"
#~ msgstr "Grid colour:"

#~ msgid "Idle Load"
#~ msgstr "Idle Load"

#~ msgid "System Load"
#~ msgstr "System Load"

#~ msgid "Nice Load"
#~ msgstr "Nice Load"

#~ msgid "User Load"
#~ msgstr "User Load"

#~ msgid "Memory"
#~ msgstr "Memory"

#~ msgid "Cached Memory"
#~ msgstr "Cached Memory"

#~ msgid "Buffered Memory"
#~ msgstr "Buffered Memory"

#~ msgid "Used Memory"
#~ msgstr "Used Memory"

#~ msgid "Application Memory"
#~ msgstr "Application Memory"

#~ msgid "Free Memory"
#~ msgstr "Free Memory"

#~ msgid "Process Count"
#~ msgstr "Process Count"

#~ msgid "Process Controller"
#~ msgstr "Process Controller"

#~ msgid "Disk Throughput"
#~ msgstr "Disk Throughput"

#~ msgid ""
#~ "_: CPU Load\n"
#~ "Load"
#~ msgstr "Load"

#~ msgid "Total Accesses"
#~ msgstr "Total Accesses"

#~ msgid "Read Accesses"
#~ msgstr "Read Accesses"

#~ msgid "Write Accesses"
#~ msgstr "Write Accesses"

#~ msgid "Read Data"
#~ msgstr "Read Data"

#~ msgid "Write Data"
#~ msgstr "Write Data"

#~ msgid "Pages In"
#~ msgstr "Pages In"

#~ msgid "Pages Out"
#~ msgstr "Pages Out"

#~ msgid "Context Switches"
#~ msgstr "Context Switches"

#~ msgid "Network"
#~ msgstr "Network"

#~ msgid "Interfaces"
#~ msgstr "Interfaces"

#~ msgid "Receiver"
#~ msgstr "Receiver"

#~ msgid "Transmitter"
#~ msgstr "Transmitter"

#~ msgid "Data"
#~ msgstr "Data"

#~ msgid "Compressed Packets"
#~ msgstr "Compressed Packets"

#~ msgid "Dropped Packets"
#~ msgstr "Dropped Packets"

#~ msgid "Errors"
#~ msgstr "Errors"

#~ msgid "FIFO Overruns"
#~ msgstr "FIFO Overruns"

#~ msgid "Frame Errors"
#~ msgstr "Frame Errors"

#~ msgid "Multicast"
#~ msgstr "Multicast"

#~ msgid "Packets"
#~ msgstr "Packets"

#~ msgid "Carrier"
#~ msgstr "Carrier"

#~ msgid "Collisions"
#~ msgstr "Collisions"

#~ msgid "Sockets"
#~ msgstr "Sockets"

#~ msgid "Total Number"
#~ msgstr "Total Number"

#~ msgid "Table"
#~ msgstr "Table"

#~ msgid "Advanced Power Management"
#~ msgstr "Advanced Power Management"

#~ msgid "ACPI"
#~ msgstr "ACPI"

#~ msgid "Thermal Zone"
#~ msgstr "Thermal Zone"

#~ msgid "Temperature"
#~ msgstr "Temperature"

#~ msgid "Fan"
#~ msgstr "Fan"

#~ msgid "State"
#~ msgstr "State"

#~ msgid "Battery"
#~ msgstr "Battery"

#~ msgid "Battery Charge"
#~ msgstr "Battery Charge"

#~ msgid "Battery Usage"
#~ msgstr "Battery Usage"

#~ msgid "Remaining Time"
#~ msgstr "Remaining Time"

#~ msgid "Interrupts"
#~ msgstr "Interrupts"

#~ msgid "Load Average (5 min)"
#~ msgstr "Load Average (5 min)"

#~ msgid "Load Average (15 min)"
#~ msgstr "Load Average (15 min)"

#~ msgid "Clock Frequency"
#~ msgstr "Clock Frequency"

#~ msgid "Hardware Sensors"
#~ msgstr "Hardware Sensors"

#~ msgid "Partition Usage"
#~ msgstr "Partition Usage"

#~ msgid "Used Space"
#~ msgstr "Used Space"

#~ msgid "Free Space"
#~ msgstr "Free Space"

#~ msgid "Fill Level"
#~ msgstr "Fill Level"

#~ msgid "CPU%1"
#~ msgstr "CPU%1"

#~ msgid "Disk%1"
#~ msgstr "Disk%1"

#~ msgid "Fan%1"
#~ msgstr "Fan%1"

#~ msgid "Temperature%1"
#~ msgstr "Temperature%1"

#~ msgid "Total"
#~ msgstr "Total"

#~ msgid "Int%1"
#~ msgstr "Int%1"

#~ msgid ""
#~ "_: the unit 1 per second\n"
#~ "1/s"
#~ msgstr "1/s"

#~ msgid "kBytes"
#~ msgstr "KB"

#~ msgid ""
#~ "_: the unit minutes\n"
#~ "min"
#~ msgstr "min"

#~ msgid ""
#~ "_: the frequency unit\n"
#~ "MHz"
#~ msgstr "MHz"

#~ msgid "Integer Value"
#~ msgstr "Integer Value"

#~ msgid "Floating Point Value"
#~ msgstr "Floating Point Value"

#~ msgid "Connection to %1 has been lost."
#~ msgstr "Connection to %1 has been lost."

#~ msgid "Global Style Settings"
#~ msgstr "Global Style Settings"

#~ msgid "Display Style"
#~ msgstr "Display Style"

#~ msgid "First foreground color:"
#~ msgstr "First foreground colour:"

#~ msgid "Second foreground color:"
#~ msgstr "Second foreground colour:"

#~ msgid "Sensor Colors"
#~ msgstr "Sensor Colours"

#~ msgid "Change Color..."
#~ msgstr "Change Colour..."

#~ msgid "Color %1"
#~ msgstr "Colour %1"

#~ msgid "Connection to %1 refused"
#~ msgstr "Connection to %1 refused"

#~ msgid "Host %1 not found"
#~ msgstr "Host %1 not found"

#~ msgid "Timeout at host %1"
#~ msgstr "Timeout at host %1"

#~ msgid "Network failure host %1"
#~ msgstr "Network failure host %1"

#~ msgid "Timer Settings"
#~ msgstr "Timer Settings"

#~ msgid "Use update interval of worksheet"
#~ msgstr "Use update interval of worksheet"

#~ msgid "All displays of the sheet are updated at the rate specified here."
#~ msgstr "All displays of the sheet are updated at the rate specified here."

#~ msgid "Connect Host"
#~ msgstr "Connect Host"

#~ msgid "Host:"
#~ msgstr "Host:"

#~ msgid "Enter the name of the host you want to connect to."
#~ msgstr "Enter the name of the host you want to connect to."

#~ msgid "Connection Type"
#~ msgstr "Connection Type"

#~ msgid "ssh"
#~ msgstr "ssh"

#~ msgid "Select this to use the secure shell to login to the remote host."
#~ msgstr "Select this to use the secure shell to login to the remote host."

#~ msgid "rsh"
#~ msgstr "rsh"

#~ msgid "Select this to use the remote shell to login to the remote host."
#~ msgstr "Select this to use the remote shell to login to the remote host."

#~ msgid "Daemon"
#~ msgstr "Daemon"

#~ msgid ""
#~ "Select this if you want to connect to a ksysguard daemon that is running "
#~ "on the machine you want to connect to, and is listening for client "
#~ "requests."
#~ msgstr ""
#~ "Select this if you want to connect to a ksysguard daemon that is running "
#~ "on the machine you want to connect to, and is listening for client "
#~ "requests."

#~ msgid "Custom command"
#~ msgstr "Custom command"

#~ msgid ""
#~ "Select this to use the command you entered below to start ksysguardd on "
#~ "the remote host."
#~ msgstr ""
#~ "Select this to use the command you entered below to start ksysguardd on "
#~ "the remote host."

#~ msgid "Port:"
#~ msgstr "Port:"

#~ msgid ""
#~ "Enter the port number on which the ksysguard daemon is listening for "
#~ "connections."
#~ msgstr ""
#~ "Enter the port number on which the ksysguard daemon is listening for "
#~ "connections."

#~ msgid "e.g.  3112"
#~ msgstr "e.g. 3112"

#~ msgid "Command:"
#~ msgstr "Command:"

#~ msgid ""
#~ "Enter the command that runs ksysguardd on the host you want to monitor."
#~ msgstr ""
#~ "Enter the command that runs ksysguardd on the host you want to monitor."

#~ msgid "e.g. ssh -l root remote.host.org ksysguardd"
#~ msgstr "e.g. ssh -l root remote.host.org ksysguardd"

#~ msgid ""
#~ "Message from %1:\n"
#~ "%2"
#~ msgstr ""
#~ "Message from %1:\n"
#~ "%2"

#~ msgid "Sensor Browser"
#~ msgstr "Sensor Browser"

#~ msgid "Sensor Type"
#~ msgstr "Sensor Type"

#~ msgid "Drag sensors to empty cells of a worksheet or the panel applet."
#~ msgstr "Drag sensors to empty cells of a worksheet or the panel applet."

#~ msgid ""
#~ "The sensor browser lists the connected hosts and the sensors that they "
#~ "provide. Click and drag sensors into drop zones of a worksheet or the "
#~ "panel applet. A display will appear that visualizes the values provided "
#~ "by the sensor. Some sensor displays can display values of multiple "
#~ "sensors. Simply drag other sensors on to the display to add more sensors."
#~ msgstr ""
#~ "The sensor browser lists the connected hosts and the sensors that they "
#~ "provide. Click and drag sensors into drop zones of a worksheet or the "
#~ "panel applet. A display will appear that visualises the values provided "
#~ "by the sensor. Some sensor displays can display values of multiple "
#~ "sensors. Simply drag other sensors on to the display to add more sensors."

#~ msgid "Drag sensors to empty fields in a worksheet."
#~ msgstr "Drag sensors to empty fields in a worksheet."

#~ msgid "Worksheet Properties"
#~ msgstr "Worksheet Properties"

#~ msgid "Rows:"
#~ msgstr "Rows:"

#~ msgid "Columns:"
#~ msgstr "Columns:"

#~ msgid "Enter the number of rows the sheet should have."
#~ msgstr "Enter the number of rows the sheet should have."

#~ msgid "Enter the number of columns the sheet should have."
#~ msgstr "Enter the number of columns the sheet should have."

#~ msgid "Enter the title of the worksheet here."
#~ msgstr "Enter the title of the worksheet here."

#~ msgid "TDE system guard"
#~ msgstr "TDE system guard"

#~ msgid "TDE System Guard"
#~ msgstr "TDE System Guard"

#~ msgid "88888 Processes"
#~ msgstr "88888 Processes"

#~ msgid "Memory: 88888888888 kB used, 88888888888 kB free"
#~ msgstr "Memory: 88888888888 kB used, 88888888888 kB free"

#~ msgid "Swap: 888888888 kB used, 888888888 kB free"
#~ msgstr "Swap: 888888888 kB used, 888888888 kB free"

#~ msgid "&New Worksheet..."
#~ msgstr "&New Worksheet..."

#~ msgid "Import Worksheet..."
#~ msgstr "Import Worksheet..."

#~ msgid "&Import Recent Worksheet"
#~ msgstr "&Import Recent Worksheet"

#~ msgid "&Remove Worksheet"
#~ msgstr "&Remove Worksheet"

#~ msgid "&Export Worksheet..."
#~ msgstr "&Export Worksheet..."

#~ msgid "C&onnect Host..."
#~ msgstr "C&onnect Host..."

#~ msgid "D&isconnect Host"
#~ msgstr "D&isconnect Host"

#~ msgid "&Worksheet Properties"
#~ msgstr "&Worksheet Properties"

#~ msgid "Load Standard Sheets"
#~ msgstr "Load Standard Sheets"

#~ msgid "Configure &Style..."
#~ msgstr "Configure &Style..."

#~ msgid "Do you really want to restore the default worksheets?"
#~ msgstr "Do you really want to restore the default worksheets?"

#~ msgid "Reset All Worksheets"
#~ msgstr "Reset All Worksheets"

#~ msgid "Reset"
#~ msgstr "Reset"

#~ msgid "Process Table"
#~ msgstr "Process Table"

#~ msgid ""
#~ "_n: 1 Process\n"
#~ "%n Processes"
#~ msgstr ""
#~ "1 Process\n"
#~ "%n Processes"

#~ msgid "Memory: %1 %2 used, %3 %4 free"
#~ msgstr "Memory: %1 %2 used, %3 %4 free"

#~ msgid "No swap space available"
#~ msgstr "No swap space available"

#~ msgid "Swap: %1 %2 used, %3 %4 free"
#~ msgstr "Swap: %1 %2 used, %3 %4 free"

#~ msgid "Show only process list of local host"
#~ msgstr "Show only process list of local host"

#~ msgid "Optional worksheet files to load"
#~ msgstr "Optional worksheet files to load"

#~ msgid "(c) 1996-2002 The KSysGuard Developers"
#~ msgstr "(c) 1996-2002 The KSysGuard Developers"

#~ msgid ""
#~ "Solaris Support\n"
#~ "Parts derived (by permission) from the sunos5\n"
#~ "module of William LeFebvre's \"top\" utility."
#~ msgstr ""
#~ "Solaris Support\n"
#~ "Parts derived (by permission) from the sunos5\n"
#~ "module of William LeFebvre's \"top\" utility."

#~ msgid ""
#~ "This is your work space. It holds your worksheets. You need to create a "
#~ "new worksheet (Menu File->New) before you can drag sensors here."
#~ msgstr ""
#~ "This is your work space. It holds your worksheets. You need to create a "
#~ "new worksheet (Menu File->New) before you can drag sensors here."

#~ msgid "Sheet %1"
#~ msgstr "Sheet %1"

#~ msgid ""
#~ "The worksheet '%1' contains unsaved data.\n"
#~ "Do you want to save the worksheet?"
#~ msgstr ""
#~ "The worksheet '%1' contains unsaved data.\n"
#~ "Do you want to save the worksheet?"

#~ msgid "*.sgrd|Sensor Files"
#~ msgstr "*.sgrd|Sensor Files"

#~ msgid "Select Worksheet to Load"
#~ msgstr "Select Worksheet to Load"

#~ msgid "You do not have a worksheet that could be saved."
#~ msgstr "You do not have a worksheet that could be saved."

#~ msgid "Save Current Worksheet As"
#~ msgstr "Save Current Worksheet As"

#~ msgid "There are no worksheets that could be deleted."
#~ msgstr "There are no worksheets that could be deleted."

#~ msgid "Cannot find file ProcessTable.sgrd."
#~ msgstr "Cannot find file ProcessTable.sgrd."

#~ msgid "#"
#~ msgstr "No."