# translation of kcmlanbrowser.po to British English # Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. # Malcolm Hunter , 2003, 2004, 2005. # Andrew Coles , 2004, 2005. # msgid "" msgstr "" "Project-Id-Version: kcmlanbrowser\n" "POT-Creation-Date: 2018-12-20 01:34+0100\n" "PO-Revision-Date: 2005-11-06 00:56+0000\n" "Last-Translator: Malcolm Hunter \n" "Language-Team: British English \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.10.2\n" #: _translatorinfo:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "" #: _translatorinfo:2 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "" #: findnic.cpp:107 findnic.cpp:174 msgid "Up" msgstr "Up" #: findnic.cpp:109 findnic.cpp:176 msgid "Down" msgstr "Down" #: findnic.cpp:112 findnic.cpp:280 msgid "Broadcast" msgstr "Broadcast" #: findnic.cpp:114 findnic.cpp:273 msgid "Point to Point" msgstr "Point to Point" #: findnic.cpp:117 findnic.cpp:287 msgid "Multicast" msgstr "Multicast" #: findnic.cpp:120 findnic.cpp:294 msgid "Loopback" msgstr "Loopback" #: findnic.cpp:122 findnic.cpp:134 msgid "Unknown" msgstr "Unknown" #: kcmlisa.cpp:63 msgid "Tell LISa Daemon How to Search for Hosts" msgstr "Tell LISa Daemon How to Search for Hosts" #: kcmlisa.cpp:66 msgid "Send &NetBIOS broadcasts using nmblookup" msgstr "Send &NetBIOS broadcasts using nmblookup" #: kcmlisa.cpp:67 kcmreslisa.cpp:63 msgid "Only hosts running SMB servers will answer" msgstr "Only hosts running SMB servers will answer" #: kcmlisa.cpp:69 msgid "Send &pings (ICMP echo packets)" msgstr "Send &pings (ICMP echo packets)" #: kcmlisa.cpp:70 msgid "All hosts running TCP/IP will answer" msgstr "All hosts running TCP/IP will answer" #: kcmlisa.cpp:77 msgid "To these &IP addresses:" msgstr "To these &IP addresses:" #: kcmlisa.cpp:78 msgid "" "Enter all ranges to scan, using the format " "'192.168.0.1/255.255.255.0;10.0.0.1;255.0.0.0'" msgstr "" "Enter all ranges to scan, using the format " "'192.168.0.1/255.255.255.0;10.0.0.1;255.0.0.0'" #: kcmlisa.cpp:88 msgid "&Broadcast network address:" msgstr "&Broadcast network address:" #: kcmlisa.cpp:89 msgid "Your network address/subnet mask (e.g. 192.168.0.0/255.255.255.0;)" msgstr "Your network address/subnet mask (e.g. 192.168.0.0/255.255.255.0;)" #: kcmlisa.cpp:96 msgid "&Trusted IP addresses:" msgstr "&Trusted IP addresses:" #: kcmlisa.cpp:97 kcmreslisa.cpp:71 msgid "" "Usually your network address/subnet mask (e.g. 192.168.0.0/255.255.255.0;)" msgstr "" "Usually your network address/subnet mask (e.g. 192.168.0.0/255.255.255.0;)" #: kcmlisa.cpp:110 msgid "Setup Wizard..." msgstr "Setup Wizard..." #: kcmlisa.cpp:113 kcmreslisa.cpp:80 msgid "&Suggest Settings" msgstr "&Suggest Settings" #: kcmlisa.cpp:117 msgid "Ad&vanced Settings..." msgstr "Ad&vanced Settings..." #: kcmlisa.cpp:119 msgid "Advanced Settings for LISa" msgstr "Advanced Settings for LISa" #: kcmlisa.cpp:124 msgid "&Additionally Check These Hosts" msgstr "&Additionally Check These Hosts" #: kcmlisa.cpp:126 msgid "The hosts listed here will be pinged" msgstr "The hosts listed here will be pinged" #: kcmlisa.cpp:130 kcmreslisa.cpp:92 msgid "Show &hosts without DNS names" msgstr "Show &hosts without DNS names" #: kcmlisa.cpp:135 kcmreslisa.cpp:97 msgid "Host list update interval:" msgstr "Host list update interval:" #: kcmlisa.cpp:136 kcmlisa.cpp:139 kcmreslisa.cpp:98 kcmreslisa.cpp:101 msgid "Search hosts after this number of seconds" msgstr "Search hosts after this number of seconds" #: kcmlisa.cpp:138 kcmreslisa.cpp:100 setupwizard.cpp:284 msgid " sec" msgstr " sec" #: kcmlisa.cpp:141 kcmreslisa.cpp:103 msgid "Always check twice for hosts when searching" msgstr "Always check twice for hosts when searching" #: kcmlisa.cpp:144 kcmreslisa.cpp:106 msgid "Wait for replies from hosts after first scan:" msgstr "Wait for replies from hosts after first scan:" #: kcmlisa.cpp:145 kcmlisa.cpp:148 kcmlisa.cpp:151 kcmlisa.cpp:154 #: kcmreslisa.cpp:107 kcmreslisa.cpp:110 kcmreslisa.cpp:113 kcmreslisa.cpp:116 msgid "How long to wait for replies to the ICMP echo requests from hosts" msgstr "How long to wait for replies to the ICMP echo requests from hosts" #: kcmlisa.cpp:147 kcmlisa.cpp:153 kcmreslisa.cpp:109 kcmreslisa.cpp:115 #: setupwizard.cpp:315 setupwizard.cpp:333 msgid " ms" msgstr " ms" #: kcmlisa.cpp:150 kcmreslisa.cpp:112 msgid "Wait for replies from hosts after second scan:" msgstr "Wait for replies from hosts after second scan:" #: kcmlisa.cpp:156 kcmreslisa.cpp:118 msgid "Max. number of ping packets to send at once:" msgstr "Max. number of ping packets to send at once:" #: kcmlisa.cpp:301 msgid "Saving the results to %1 failed." msgstr "Saving the results to %1 failed." #: kcmlisa.cpp:310 msgid "No network interface cards found." msgstr "No network interface cards found." #: kcmlisa.cpp:332 kcmreslisa.cpp:232 msgid "" "You have more than one network interface installed.
Please make sure the " "suggested settings are correct.

The following interfaces were found:" "

" msgstr "" "You have more than one network interface installed.
Please make sure the " "suggested settings are correct.

The following interfaces were found:" "

" #: kcmlisa.cpp:381 msgid "" "The configuration has been saved to /etc/lisarc.\n" "Make sure that the LISa daemon is started,\n" " e.g. using an init script when booting.\n" "You can find examples and documentation at http://lisa-home.sourceforge.net ." msgstr "" "The configuration has been saved to /etc/lisarc.\n" "Make sure that the LISa daemon is started,\n" " e.g. using an init script when booting.\n" "You can find examples and documentation at http://lisa-home.sourceforge.net ." #: kcmreslisa.cpp:59 msgid "Tell ResLISa Daemon How to Search for Hosts" msgstr "Tell ResLISa Daemon How to Search for Hosts" #: kcmreslisa.cpp:62 msgid "Send &NetBIOS broadcasts using &nmblookup" msgstr "Send &NetBIOS broadcasts using &nmblookup" #: kcmreslisa.cpp:65 msgid "A&dditionally Check These Hosts" msgstr "A&dditionally Check These Hosts" #: kcmreslisa.cpp:66 msgid "The hosts listed here will be pinged." msgstr "The hosts listed here will be pinged." #: kcmreslisa.cpp:70 msgid "&Trusted addresses:" msgstr "&Trusted addresses:" #: kcmreslisa.cpp:77 msgid "Use &rlan:/ instead of lan:/ in Konqueror's navigation panel" msgstr "Use &rlan:/ instead of lan:/ in Konqueror's navigation panel" #: kcmreslisa.cpp:84 msgid "Ad&vanced Settings" msgstr "Ad&vanced Settings" #: kcmreslisa.cpp:87 msgid "Advanced Settings for ResLISa" msgstr "Advanced Settings for ResLISa" #: kcmreslisa.cpp:214 msgid "" "It appears you do not have any network interfaces installed on your system." msgstr "" "It appears you do not have any network interfaces installed on your system." #: kcmreslisa.cpp:242 msgid "" "The ResLISa daemon is now configured correctly, hopefully.
Make sure that " "the reslisa binary is installed suid root." msgstr "" "The ResLISa daemon is now configured correctly, hopefully.
Make sure that " "the reslisa binary is installed suid root." #: kcmtdeiolan.cpp:41 msgid "Show Links for Following Services" msgstr "Show Links for Following Services" #: kcmtdeiolan.cpp:43 msgid "FTP (TCP, port 21): " msgstr "FTP (TCP, port 21): " #: kcmtdeiolan.cpp:44 msgid "HTTP (TCP, port 80): " msgstr "HTTP (TCP, port 80): " #: kcmtdeiolan.cpp:45 msgid "NFS (TCP, port 2049): " msgstr "NFS (TCP, port 2049): " #: kcmtdeiolan.cpp:46 msgid "Windows shares (TCP, ports 445 and 139):" msgstr "Windows shares (TCP, ports 445 and 139):" #: kcmtdeiolan.cpp:47 msgid "Secure Shell/Fish (TCP, port 22): " msgstr "Secure Shell/Fish (TCP, port 22): " #: kcmtdeiolan.cpp:48 msgid "Show &short hostnames (without domain suffix)" msgstr "Show &short hostnames (without domain suffix)" #: kcmtdeiolan.cpp:51 msgid "Default LISa server host: " msgstr "Default LISa server host: " #: portsettingsbar.cpp:33 msgid "Check Availability" msgstr "Check Availability" #: portsettingsbar.cpp:34 msgid "Always" msgstr "Always" #: portsettingsbar.cpp:35 msgid "Never" msgstr "Never" #: setupwizard.cpp:63 msgid "LISa Network Neighborhood Setup" msgstr "LISa Network Neighbourhood Setup" #: setupwizard.cpp:71 setupwizard.cpp:512 msgid "Advanced Settings" msgstr "Advanced Settings" #: setupwizard.cpp:126 msgid "" "

This wizard will ask you a few questions about your network.

" "

Usually you can simply keep the suggested settings.

After you have " "finished the wizard, you will be able to browse and use shared resources on " "your LAN, not only Samba/Windows shares, but also FTP, HTTP and NFS " "resources exactly the same way.

Therefore you need to setup the " "LAN Information Server (LISa) on your machine. Think of the LISa " "server as an FTP or HTTP server; it has to be run by root, it should be " "started during the boot process and only one LISa server can run on one " "machine." msgstr "" "

This wizard will ask you a few questions about your network.

" "

Usually you can simply keep the suggested settings.

After you have " "finished the wizard, you will be able to browse and use shared resources on " "your LAN, not only Samba/Windows shares, but also FTP, HTTP and NFS " "resources exactly the same way.

Therefore you need to setup the " "LAN Information Server (LISa) on your machine. Think of the LISa " "server as an FTP or HTTP server; it has to be run by root, it should be " "started during the boot process and only one LISa server can run on one " "machine." #: setupwizard.cpp:149 msgid "" "

More than one network interface card was found on your system.

Please choose the one to which your LAN is connected.

" msgstr "" "

More than one network interface card was found on your system.

Please choose the one to which your LAN is connected.

" #: setupwizard.cpp:164 msgid "" "

No network interface card was found on your system.

Possible reason: no network card is installed. You probably want to " "cancel now or enter your IP address and network manually

Example: " "192.168.0.1/255.255.255.0.
" msgstr "" "

No network interface card was found on your system.

Possible reason: no network card is installed. You probably want to " "cancel now or enter your IP address and network manually

Example: " "192.168.0.1/255.255.255.0.
" #: setupwizard.cpp:185 msgid "There are two ways LISa can search hosts on your network." msgstr "There are two ways LISa can search hosts on your network." #: setupwizard.cpp:187 msgid "Send pings" msgstr "Send pings" #: setupwizard.cpp:188 msgid "" "All hosts with TCP/IP will respond,
whether or not they are samba servers." "
Don't use it if your network is very large, i.e. more than 1000 hosts." "
" msgstr "" "All hosts with TCP/IP will respond,
whether or not they are samba servers." "
Don't use it if your network is very large, i.e. more than 1000 hosts." "
" #: setupwizard.cpp:191 msgid "Send NetBIOS broadcasts" msgstr "Send NetBIOS broadcasts" #: setupwizard.cpp:192 msgid "" "You need to have the samba package (nmblookup) installed.
Only samba/" "windows servers will respond.
This method is not very reliable.
You " "should enable it if you are part of a large network." msgstr "" "You need to have the Samba package (nmblookup) installed.
Only Samba/" "Windows servers will respond.
This method is not very reliable.
You " "should enable it if you are part of a large network." #: setupwizard.cpp:201 setupwizard.cpp:227 setupwizard.cpp:249 #: setupwizard.cpp:269 setupwizard.cpp:295 setupwizard.cpp:340 msgid "If unsure, keep it as is." msgstr "If unsure, keep it as is." #: setupwizard.cpp:210 msgid "" "All IP addresses included in the specified range will be pinged.
If you " "are part of a small network, e.g. with network mask 255.255.255.0
use " "your IP address/network mask.
" msgstr "" "All IP addresses included in the specified range will be pinged.
If you " "are part of a small network, e.g. with network mask 255.255.255.0
use " "your IP address/network mask.
" #: setupwizard.cpp:215 msgid "" "
There are four ways to specify address ranges:
1. IP address/network " "mask, like 192.168.0.0/255.255.255.0;
2. single IP " "addresses, like 10.0.0.23;
3. continuous ranges, like " "10.0.1.0-10.0.1.200;
4. ranges for each part of the address, " "like 10-10.1-5.1-25.1-3;
You can also enter combinations of " "1 to 4, separated by \";\", " "like
192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;
" msgstr "" "
There are four ways to specify address ranges:
1. IP address/network " "mask, like 192.168.0.0/255.255.255.0;
2. single IP " "addresses, like 10.0.0.23;
3. continuous ranges, like " "10.0.1.0-10.0.1.200;
4. ranges for each part of the address, " "like 10-10.1-5.1-25.1-3;
You can also enter combinations of " "1 to 4, separated by \";\", " "like
192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;
" #: setupwizard.cpp:236 msgid "" "This is a security related setting.
It provides a simple IP address based " "way to specify \"trusted\" hosts.
Only hosts which fit into the addresses " "given here are accepted by LISa as clients. The list of hosts published by " "LISa will also only contain hosts which fit into this scheme.
Usually you " "enter your IP address/network mask here." msgstr "" "This is a security related setting.
It provides a simple IP address based " "way to specify \"trusted\" hosts.
Only hosts which fit into the addresses " "given here are accepted by LISa as clients. The list of hosts published by " "LISa will also only contain hosts which fit into this scheme.
Usually you " "enter your IP address/network mask here." #: setupwizard.cpp:258 msgid "" "
Enter your IP address and network mask here, like " "192.168.0.1/255.255.255.0" msgstr "" "
Enter your IP address and network mask here, like " "192.168.0.1/255.255.255.0" #: setupwizard.cpp:261 msgid "" "
To reduce the network load, the LISa servers in one network
cooperate " "with each other. Therefore you have to enter the broadcast
address here. " "If you are connected to more than one network, choose
one of the " "broadcast addresses." msgstr "" "
To reduce the network load, the LISa servers in one network
cooperate " "with each other. Therefore you have to enter the broadcast
address here. " "If you are connected to more than one network, choose
one of the " "broadcast addresses." #: setupwizard.cpp:280 msgid "" "
Enter the interval after which LISa, if busy, will update its host list." msgstr "" "
Enter the interval after which LISa, if busy, will update its host list." #: setupwizard.cpp:286 msgid "" "
Please note that the update interval will grow automatically by up to 16 " "times the value you enter here, if nobody accesses the LISa server. So if " "you enter 300 sec = 5 min here, this does not mean that LISa will ping your " "whole network every 5 minutes. The interval will increase up to 16 x 5 min = " "80 min." msgstr "" "
Please note that the update interval will grow automatically by up to 16 " "times the value you enter here, if nobody accesses the LISa server. So if " "you enter 300 sec = 5 min here, this does not mean that LISa will ping your " "whole network every 5 minutes. The interval will increase up to 16 x 5 min = " "80 min." #: setupwizard.cpp:305 msgid "" "This page contains several settings you usually only
need if LISa doesn't " "find all hosts in your network." msgstr "" "This page contains several settings you usually only
need if LISa doesn't " "find all hosts in your network." #: setupwizard.cpp:308 msgid "Re&port unnamed hosts" msgstr "Re&port unnamed hosts" #: setupwizard.cpp:309 msgid "" "Should hosts for which LISa can't resolve the name be included in the host " "list?
" msgstr "" "Should hosts for which LISa can't resolve the name be included in the host " "list?
" #: setupwizard.cpp:313 msgid "Wait for replies after first scan" msgstr "Wait for replies after first scan" #: setupwizard.cpp:316 msgid "" "How long should LISa wait for answers to pings?
If LISa doesn't find all " "hosts, try to increase this value.
" msgstr "" "How long should LISa wait for answers to pings?
If LISa doesn't find all " "hosts, try to increase this value.
" #: setupwizard.cpp:320 msgid "Max. number of pings to send at once" msgstr "Max. number of pings to send at once" #: setupwizard.cpp:323 msgid "" "How many ping packets should LISa send at once?
If LISa doesn't find all " "hosts you could try to decrease this value.
" msgstr "" "How many ping packets should LISa send at once?
If LISa doesn't find all " "hosts you could try to decrease this value.
" #: setupwizard.cpp:326 msgid "Al&ways scan twice" msgstr "Al&ways scan twice" #: setupwizard.cpp:330 msgid "Wait for replies after second scan" msgstr "Wait for replies after second scan" #: setupwizard.cpp:334 msgid "If LISa doesn't find all hosts, enable this option." msgstr "If LISa doesn't find all hosts, enable this option." #: setupwizard.cpp:350 msgid "" "
Your LAN browsing has been successfully set up.

Make sure that " "the LISa server is started during the boot process. How this is done depends " "on your distribution and OS. Usually you have to insert it somewhere in a " "boot script under /etc.
Start the LISa server as root and " "without any command line options.
The config file will now be saved to " "/etc/lisarc.
To test the server, try lan:/ in " "Konqueror.

If you have problems or suggestions, visit http://lisa-" "home.sourceforge.net." msgstr "" "
Your LAN browsing has been successfully set up.

Make sure that " "the LISa server is started during the boot process. How this is done depends " "on your distribution and OS. Usually you have to insert it somewhere in a " "boot script under /etc.
Start the LISa server as root and " "without any command line options.
The config file will now be saved to " "/etc/lisarc.
To test the server, try lan:/ in " "Konqueror.

If you have problems or suggestions, visit http://lisa-" "home.sourceforge.net." #: setupwizard.cpp:437 msgid "Congratulations!" msgstr "Congratulations!" #: setupwizard.cpp:462 msgid "You can use the same syntax as on the previous page.
" msgstr "You can use the same syntax as on the previous page.
" #: setupwizard.cpp:464 msgid "" "There are three ways to specify IP addresses:
1. IP address/network mask, " "like 192.168.0.0/255.255.255.0;
2. continuous ranges, " "like 10.0.1.0-10.0.1.200;
3. single IP addresses, like " "10.0.0.23;
You can also enter combinations of 1 to 3, separated by " "\";\",
like 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;" "
" msgstr "" "There are three ways to specify IP addresses:
1. IP address/network mask, " "like 192.168.0.0/255.255.255.0;
2. continuous ranges, " "like 10.0.1.0-10.0.1.200;
3. single IP addresses, like " "10.0.0.23;
You can also enter combinations of 1 to 3, separated by " "\";\",
like 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;" "
" #: setupwizard.cpp:490 msgid "Multiple Network Interfaces Found" msgstr "Multiple Network Interfaces Found" #: setupwizard.cpp:493 msgid "No Network Interface Found" msgstr "No Network Interface Found" #: setupwizard.cpp:498 msgid "Specify Search Method" msgstr "Specify Search Method" #: setupwizard.cpp:501 msgid "Specify Address Range LISa Will Ping" msgstr "Specify Address Range LISa Will Ping" #: setupwizard.cpp:504 msgid "\"Trusted\" Hosts" msgstr "\"Trusted\" Hosts" #: setupwizard.cpp:507 msgid "Your Broadcast Address" msgstr "Your Broadcast Address" #: setupwizard.cpp:510 msgid "LISa Update Interval" msgstr "LISa Update Interval"