# translation of kcmkicker.po to Norwegian Nynorsk # Norwegian (Nynorsk) TDE translation. # Copyright (C) 2000 Gaute Hvoslef Kvalnes. # # Gaute Hvoslef Kvalnes , 1999-2000,2002, 2004, 2005. # Karl Ove Hufthammer , 2004, 2007. msgid "" msgstr "" "Project-Id-Version: kcmkicker\n" "POT-Creation-Date: 2008-07-08 01:18+0200\n" "PO-Revision-Date: 2007-08-15 20:17+0200\n" "Last-Translator: Karl Ove Hufthammer \n" "Language-Team: Norwegian Nynorsk \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" #: _translatorinfo.cpp:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "Gaute Hvoslef Kvalnes" #: _translatorinfo.cpp:3 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "gaute@verdsveven.com" #: advancedDialog.cpp:36 msgid "Advanced Options" msgstr "Avanserte val" #: applettab_impl.cpp:59 msgid "" "Panel applets can be started in two different ways: internally or externally. " "While 'internally' is the preferred way to load applets, this can raise " "stability or security problems when you are using poorly-programmed third-party " "applets. To address these problems, applets can be marked 'trusted'. You might " "want to configure Kicker to treat trusted applets differently to untrusted " "ones; your options are: " "
    " "
  • Load only trusted applets internally: All applets but the ones " "marked 'trusted' will be loaded using an external wrapper application.
  • " "
  • Load startup config applets internally: " "The applets shown on TDE startup will be loaded internally, others will be " "loaded using an external wrapper application.
  • " "
  • Load all applets internally
" msgstr "" "Panelprogram kan startast på to ulike måtar: Internt eller eksternt. Vanlegvis " "bør panelprogramma lastast internt, men det kan gje problem med stabilitet " "eller tryggleik dersom programma er dårleg laga. Difor kan du velja om du vil " "stola på kvar enkelt panelprogram. Dei panelprogramma du stolar på kan Kicker " "handtera på ein annan måte enn dei du ikkje stolar på. Du kan velja: " "
    " "
  • Berre start panelprogram du stolar på internt: " "Alle panelprogramma utanom dei du stolar på vert lasta gjennom eit eksternt " "hjelpeprogram.
  • " "
  • Start panelprogram frå oppstarten internt: " "Dei panelprogramma som vert viste når TDE startar vert lasta internt, og dei " "andre vert lasta gjennom eit eksternt hjelpeprogram.
  • " "
  • Start alle panelprogram internt
" #: applettab_impl.cpp:70 msgid "" "Here you can see a list of applets that are marked 'trusted', i.e. will be " "loaded internally by Kicker in any case. To move an applet from the list of " "available applets to the trusted ones, or vice versa, select it and press the " "left or right buttons." msgstr "" "Her ser du ei liste over dei panelprogramma som du har vald å stola på. Desse " "vert alltid lasta internt av Kicker. Du kan flytta panelprogram mellom listene " "ved å bruka høgre- og venstreknappane." #: applettab_impl.cpp:75 msgid "" "Click here to add the selected applet from the list of available, untrusted " "applets to the list of trusted applets." msgstr "" "Trykk her for å flytta det valde panelprogrammet frå lista over tilgjengelege " "program som du ikkje stolar på til lista over panelprogram du stolar på." #: applettab_impl.cpp:78 msgid "" "Click here to remove the selected applet from the list of trusted applets to " "the list of available, untrusted applets." msgstr "" "Trykk her for å flytta det valde panelprogrammet frå lista program som du " "stolar på til lista over tilgjengelege panelprogram du ikkje stolar på." #: applettab_impl.cpp:81 msgid "" "Here you can see a list of available applets that you currently do not trust. " "This does not mean you cannot use those applets, but rather that the panel's " "policy using them depends on your applet security level. To move an applet from " "the list of available applets to the trusted ones or vice versa, select it and " "press the left or right buttons." msgstr "" "Her ser du ei liste over tilgjengelege panelprogram som du har vald å ikkje " "stola på. Du kan bruka desse panelprogramma dersom du har vald å tillata " "panelprogram som du ikkje stolar på. Du kan flytta panelprogram mellom listene " "ved å bruka venstre- og høgreknappane." #: extensionInfo.cpp:45 msgid "Main Panel" msgstr "Hovudpanel" #. i18n: file hidingtab.ui line 371 #: hidingtab_impl.cpp:216 rc.cpp:197 #, no-c-format msgid "Show left panel-hiding bu&tton" msgstr "Vis venstre panel&gøymeknapp" #: hidingtab_impl.cpp:217 msgid "Show right panel-hiding bu&tton" msgstr "Vis &høgre panelgøymeknapp" #: hidingtab_impl.cpp:221 msgid "Show top panel-hiding bu&tton" msgstr "Vis øv&re panelgøymeknapp" #: hidingtab_impl.cpp:222 msgid "Show bottom panel-hiding bu&tton" msgstr "Vis &nedre panelgøymeknapp" #: lookandfeeltab_impl.cpp:67 msgid "Select Image File" msgstr "Vel ei biletfil" #: lookandfeeltab_impl.cpp:144 msgid "" "Error loading theme image file.\n" "\n" "%1\n" "%2" msgstr "" "Feil ved lasting av temabiletfil.\n" "\n" "%1\n" "%2" #: lookandfeeltab_kcm.cpp:36 main.cpp:346 msgid "kcmkicker" msgstr "kcmkicker" #: lookandfeeltab_kcm.cpp:36 main.cpp:347 msgid "TDE Panel Control Module" msgstr "Kontrollmodul for TDE-panelet" #: lookandfeeltab_kcm.cpp:38 msgid "" "(c) 1999 - 2001 Matthias Elter\n" "(c) 2002 Aaron J. Seigo" msgstr "" "(c) 1999 – 2001 Matthias Elter\n" "(c) 2002 Aaron J. Seigo" #: lookandfeeltab_kcm.cpp:86 main.cpp:333 msgid "" "

Panel

Here you can configure the TDE panel (also referred to as " "'kicker'). This includes options like the position and size of the panel, as " "well as its hiding behavior and its looks." "

Note that you can also access some of these options directly by clicking on " "the panel, e.g. dragging it with the left mouse button or using the context " "menu on right mouse button click. This context menu also offers you " "manipulation of the panel's buttons and applets." msgstr "" "

Panel

Her kan du setja opp TDE-panelet (òg kjend som «kicker»). Dette " "inkluderer val som posisjon og storleik på panelet, og korleis det ser ut og " "oppfører seg." "

Legg merke til at du òg har tilgang til nokre av desse vala ved å klikka " "direkte på panelet. Du kan t.d. dra det med den venstre museknappen eller bruka " "høgre museknapp til å visa ein meny. Gjennom denne sprettoppmenyen kan du òg " "tilpassa knappane og appletane på panelet." #: main.cpp:349 msgid "" "(c) 1999 - 2001 Matthias Elter\n" "(c) 2002 - 2003 Aaron J. Seigo" msgstr "" "(c) 1999 – 2001 Matthias Elter\n" "(c) 2002 – 2003 Aaron J. Seigo" #: menutab_impl.cpp:99 msgid "Quick Browser" msgstr "Snøgglesar" #: menutab_impl.cpp:177 msgid "" "The TDE menu editor (kmenuedit) could not be launched.\n" "Perhaps it is not installed or not in your path." msgstr "" "Klarte ikkje starta programmet for redigering av TDE-menyen.\n" "Det er kanskje ikkje installert eller i søkjestigen (PATH)." #: menutab_impl.cpp:179 msgid "Application Missing" msgstr "Manglar program" #: positiontab_impl.cpp:77 positiontab_impl.cpp:92 msgid "Top left" msgstr "Øvst til venstre" #: positiontab_impl.cpp:78 positiontab_impl.cpp:93 msgid "Top center" msgstr "Øvst midt på" #: positiontab_impl.cpp:79 positiontab_impl.cpp:94 msgid "Top right" msgstr "Øvst til høgre" #: positiontab_impl.cpp:80 positiontab_impl.cpp:95 msgid "Left top" msgstr "Til venstre oppe" #: positiontab_impl.cpp:81 positiontab_impl.cpp:96 msgid "Left center" msgstr "Til venstre midt på" #: positiontab_impl.cpp:82 positiontab_impl.cpp:97 msgid "Left bottom" msgstr "Til venstre nede" #: positiontab_impl.cpp:83 positiontab_impl.cpp:98 msgid "Bottom left" msgstr "Nedst til venstre" #: positiontab_impl.cpp:84 positiontab_impl.cpp:99 msgid "Bottom center" msgstr "Nedst midt på" #: positiontab_impl.cpp:85 positiontab_impl.cpp:100 msgid "Bottom right" msgstr "Nedst til høgre" #: positiontab_impl.cpp:86 positiontab_impl.cpp:101 msgid "Right top" msgstr "Til høgre oppe" #: positiontab_impl.cpp:87 positiontab_impl.cpp:102 msgid "Right center" msgstr "Til høgre midt på" #: positiontab_impl.cpp:88 positiontab_impl.cpp:103 msgid "Right bottom" msgstr "Til høgre nede" #: positiontab_impl.cpp:116 msgid "All Screens" msgstr "Alle skjermar" #. i18n: file positiontab.ui line 412 #: positiontab_impl.cpp:535 rc.cpp:528 #, no-c-format msgid "Custom" msgstr "Tilpassa" #. i18n: file advancedOptions.ui line 27 #: rc.cpp:3 #, no-c-format msgid "Panel Dimensions" msgstr "Panelstorleik" #. i18n: file advancedOptions.ui line 38 #: rc.cpp:6 #, no-c-format msgid "&Hide button size:" msgstr "Storlei&k på gøymeknappar:" #. i18n: file advancedOptions.ui line 44 #: rc.cpp:9 rc.cpp:15 #, no-c-format msgid "" "This setting defines how large the panel hide buttons will be if they are " "visible." msgstr "" "Denne innstillinga avgjer kor store gøymeknappane på panelet vil vera dersom " "dei er synlege." #. i18n: file advancedOptions.ui line 52 #: rc.cpp:12 rc.cpp:534 #, no-c-format msgid " pixels" msgstr " pikslar" #. i18n: file advancedOptions.ui line 88 #: rc.cpp:18 #, no-c-format msgid "Applet Handles" msgstr "Programhandtak" #. i18n: file advancedOptions.ui line 99 #: rc.cpp:21 #, no-c-format msgid "&Visible" msgstr "S&ynlege" #. i18n: file advancedOptions.ui line 108 #: rc.cpp:24 #, no-c-format msgid "" "\n" "

Select this option to always show the Applet Handles.

\n" "

Applet Handles let you move, remove and configure applets in the panel.

\n" "" msgstr "" "" "

Her kan du velja om handtaka på panelprogramma skal visast.

" "

Med handtaka kan du flytta, fjerna og tilpassa panelprogramma.

" #. i18n: file advancedOptions.ui line 116 #: rc.cpp:30 #, no-c-format msgid "&Fade out" msgstr "&Ton ut" #. i18n: file advancedOptions.ui line 122 #: rc.cpp:33 #, no-c-format msgid "" "\n" "

Select this option to make Applet Handles visible only on mouse hover.

\n" "

Applet Handles let you move, remove and configure applets in the panel.

\n" "
" msgstr "" "" "

Her kan du velja om handtaka på panelprogramma berre skal vera synlege under " "musepeikaren.

" "

Med handtaka kan du flytta, fjerna og tilpassa panelprogramma.

" #. i18n: file advancedOptions.ui line 130 #: rc.cpp:39 #, no-c-format msgid "&Hide" msgstr "&Gøym" #. i18n: file advancedOptions.ui line 135 #: rc.cpp:42 #, no-c-format msgid "" "\n" "

" "

Select this option to always hide the Applet Handles. Beware that this " "option can disable removing, moving or configuring some applets.

\n" "
" msgstr "" "" "

" "

Vel dette alternativet dersom du vil at handtaka på panelprogramma alltid " "skal vera gøymde. Legg merke til at det kan verta umogleg å fjerna, flytta " "eller tilpassa enkelte panelprogram.

" #. i18n: file advancedOptions.ui line 162 #: rc.cpp:47 #, no-c-format msgid "Transparency" msgstr "Gjennomsikt" #. i18n: file advancedOptions.ui line 184 #: rc.cpp:50 rc.cpp:77 #, no-c-format msgid "" "Click on this button to set the color to use when tinting transparent panels." msgstr "" "Bruk denne knappen til å velja fargen som skal brukast til å fargeleggja " "gjennomsiktige panel." #. i18n: file advancedOptions.ui line 209 #: rc.cpp:53 #, no-c-format msgid "Min" msgstr "Min" #. i18n: file advancedOptions.ui line 215 #: rc.cpp:56 rc.cpp:59 rc.cpp:65 rc.cpp:71 #, no-c-format msgid "" "Use this slider to set how much transparent panels should be tinted using the " "tint color." msgstr "" "Med denne glidebrytaren kan du velja kor sterk fargetoning som skal brukast på " "gjennomsiktige panel." #. i18n: file advancedOptions.ui line 251 #: rc.cpp:62 #, no-c-format msgid "Max" msgstr "Maks" #. i18n: file advancedOptions.ui line 265 #: rc.cpp:68 #, no-c-format msgid "Ti&nt amount:" msgstr "To&nestyrke:" #. i18n: file advancedOptions.ui line 279 #: rc.cpp:74 #, no-c-format msgid "Tint c&olor:" msgstr "Tone&farge:" #. i18n: file advancedOptions.ui line 293 #: rc.cpp:80 #, no-c-format msgid "Also apply to panel with menu bar" msgstr "Bruk òg på panel med menylinje" #. i18n: file advancedOptions.ui line 296 #: rc.cpp:83 #, no-c-format msgid "" "Normally if you have the desktop's or current application's menu bar displayed " "in a panel at the top of the screen (MacOS-style), transparency is disabled for " "this panel to avoid the desktop background clashing with the menu bar. Set this " "option to make it transparent anyways." msgstr "" "Vanlegvis vert ikkje menylinja øvst på skjermen gjennomsiktig for å unngå at " "skrivebordsbakgrunnen kjem i vegen. Dette gjeld både skrivebordsmenyen og " "programmenyen dersom du har valt å visa den øvst på skjermen som i Mac OS. Her " "kan du velja om menylinja skal vera gjennomsiktig likevel." #. i18n: file applettab.ui line 24 #: rc.cpp:86 #, no-c-format msgid "Security Level" msgstr "Tryggleiksnivå" #. i18n: file applettab.ui line 35 #: rc.cpp:89 #, no-c-format msgid "Load only trusted applets internal" msgstr "Berre start appletar du stolar på internt" #. i18n: file applettab.ui line 43 #: rc.cpp:92 #, no-c-format msgid "Load startup config applets internal" msgstr "Start panelprogram frå oppstarten internt" #. i18n: file applettab.ui line 51 #: rc.cpp:95 #, no-c-format msgid "Load all applets internal" msgstr "Start alle panelprogram internt" #. i18n: file applettab.ui line 67 #: rc.cpp:98 #, no-c-format msgid "List of Trusted Applets" msgstr "Liste over appletar du stolar på" #. i18n: file applettab.ui line 84 #: rc.cpp:101 #, no-c-format msgid "Available Applets" msgstr "Tilgjengelege appletar" #. i18n: file applettab.ui line 133 #: rc.cpp:104 #, no-c-format msgid ">>" msgstr ">>" #. i18n: file applettab.ui line 172 #: rc.cpp:107 #, no-c-format msgid "<<" msgstr "<<" #. i18n: file applettab.ui line 197 #: rc.cpp:110 #, no-c-format msgid "Trusted Applets" msgstr "Appletar du stolar på" #. i18n: file hidingtab.ui line 44 #: rc.cpp:113 rc.cpp:467 #, no-c-format msgid "S&ettings for:" msgstr "&Innstillingar for:" #. i18n: file hidingtab.ui line 79 #: rc.cpp:116 #, no-c-format msgid "Hide Mode" msgstr "Gøymemodus" #. i18n: file hidingtab.ui line 107 #: rc.cpp:119 #, no-c-format msgid "On&ly hide when a panel-hiding button is clicked" msgstr "Gøym &berre når du trykkjer ein gøymeknapp" #. i18n: file hidingtab.ui line 113 #: rc.cpp:122 #, no-c-format msgid "" "If this option is selected, the only way to hide the panel will be to click on " "the hide buttons that appear on either end of it." msgstr "" "Når dette valet er på, kan du berre gøyma panelet ved å trykkja på ein av " "gøymeknappane i kvar ende." #. i18n: file hidingtab.ui line 138 #: rc.cpp:125 #, no-c-format msgid " sec" msgstr " s" #. i18n: file hidingtab.ui line 141 #: rc.cpp:128 #, no-c-format msgid "Immediately" msgstr "Med ein gong" #. i18n: file hidingtab.ui line 144 #: rc.cpp:131 rc.cpp:137 #, no-c-format msgid "" "Here you can change the delay after which the panel will disappear if not used." msgstr "" "Her kan du velja kor lang tid det skal gå før panelet forsvinn når det ikkje er " "i bruk." #. i18n: file hidingtab.ui line 163 #: rc.cpp:134 #, no-c-format msgid "after the &cursor leaves the panel" msgstr "etter at &peikaren forlet panelet" #. i18n: file hidingtab.ui line 199 #: rc.cpp:140 #, no-c-format msgid "Allow other &windows to cover the panel" msgstr "Lat andre vindauge &dekkja panelet" #. i18n: file hidingtab.ui line 202 #: rc.cpp:143 #, no-c-format msgid "" "If this option is selected, the panel will allow itself to be covered by other " "windows." msgstr "Med denne funksjonen kan du la andre vindauge liggja over panelet." #. i18n: file hidingtab.ui line 213 #: rc.cpp:146 #, no-c-format msgid "Hide a&utomatically" msgstr "Gøym a&utomatisk" #. i18n: file hidingtab.ui line 216 #: rc.cpp:149 #, no-c-format msgid "" "If this option is selected, the panel will automatically hide after a period of " "time and reappear when you move the mouse to the screen edge where the panel is " "hidden. This is particularly useful for small screen resolutions, such as on " "laptops." msgstr "" "Gøymer automatisk panelet etter ei viss tid og viser det att når du flyttar " "musepeikaren til den skjermkanten der panelet er gøymd. Dette er spesielt " "nyttig om du har lita skjermoppløysing, til dømes på ei bærbar maskin." #. i18n: file hidingtab.ui line 235 #: rc.cpp:152 #, no-c-format msgid "&Raise when the pointer touches the screen's:" msgstr "&Hev når peikaren er i posisjon:" #. i18n: file hidingtab.ui line 238 #: rc.cpp:155 #, no-c-format msgid "" "When this option is selected, moving the pointer to the specified edge of the " "screen will cause the panel to appear on top of any windows that may be " "covering it." msgstr "" "Når denne funksjonen er på, vil panelet leggja seg over dei andre vindauga på " "skjermen når musepeikaren ligg ved ein skjermkant." #. i18n: file hidingtab.ui line 244 #: rc.cpp:158 #, no-c-format msgid "Top Left Corner" msgstr "Oppe til venstre" #. i18n: file hidingtab.ui line 249 #: rc.cpp:161 #, no-c-format msgid "Top Edge" msgstr "Oppe" #. i18n: file hidingtab.ui line 254 #: rc.cpp:164 #, no-c-format msgid "Top Right Corner" msgstr "Oppe til høgre" #. i18n: file hidingtab.ui line 259 #: rc.cpp:167 #, no-c-format msgid "Right Edge" msgstr "Høgre" #. i18n: file hidingtab.ui line 264 #: rc.cpp:170 #, no-c-format msgid "Bottom Right Corner" msgstr "Nede til høgre" #. i18n: file hidingtab.ui line 269 #: rc.cpp:173 #, no-c-format msgid "Bottom Edge" msgstr "Nede" #. i18n: file hidingtab.ui line 274 #: rc.cpp:176 #, no-c-format msgid "Bottom Left Corner" msgstr "Nede til venstre" #. i18n: file hidingtab.ui line 279 #: rc.cpp:179 #, no-c-format msgid "Left Edge" msgstr "Venstre" #. i18n: file hidingtab.ui line 289 #: rc.cpp:182 #, no-c-format msgid "" "Here you can set the location on the screen's edge that will bring the panel to " "the front." msgstr "Her kan du velja kvar på skjermkanten panelet skal leggjast fremst." #. i18n: file hidingtab.ui line 319 #: rc.cpp:185 #, no-c-format msgid "Show panel when switching &desktops" msgstr "Vis pa&nelet ved byting av skrivebord" #. i18n: file hidingtab.ui line 322 #: rc.cpp:188 #, no-c-format msgid "" "If this option is enabled, the panel will automatically show itself for a brief " "period of time when the desktop is switched so you can see which desktop you " "are on." msgstr "" "Dersom dette valet er aktivert, vert panelet automatisk vist ei kort tid når du " "byter skrivebord, slik at du kan sjå kva for skrivebord du er på." #. i18n: file hidingtab.ui line 357 #: rc.cpp:191 #, no-c-format msgid "Panel-Hiding Buttons" msgstr "Gøymeknappar" #. i18n: file hidingtab.ui line 360 #: rc.cpp:194 #, no-c-format msgid "" "This option controls the panel-hiding buttons, which are buttons with a small " "triangle found at the ends of the panel. You can place a button at either end " "of the panel, or both. Clicking on one of these buttons will hide the panel." msgstr "" "Dette valet styrer panelgøymeknappane, som er knappar med ein liten trekant i " "kvar ende av panelet. Du kan velja om det skal vera knappar i kvar ende, eller " "berre i den eine enden. Når du trykkjer på ein av desse knappane, vert panelet " "gøymt." #. i18n: file hidingtab.ui line 377 #: rc.cpp:200 #, no-c-format msgid "" "When this option is selected, a panel-hiding button appears on the left end of " "the panel." msgstr "" "Her kan du velja om du vil ha ein panelgøymeknapp til venstre på panelet." #. i18n: file hidingtab.ui line 385 #: rc.cpp:203 #, no-c-format msgid "Show right panel-hiding &button" msgstr "Vis &høgre panelgøymeknapp" #. i18n: file hidingtab.ui line 391 #: rc.cpp:206 #, no-c-format msgid "" "When this option is selected, a panel-hiding button appears on the right end of " "the panel." msgstr "" "Her kan du velja om du vil ha ein panelgøymeknapp til høgre på panelet." #. i18n: file hidingtab.ui line 426 #: rc.cpp:209 #, no-c-format msgid "Panel Animation" msgstr "Panelanimasjon" #. i18n: file hidingtab.ui line 454 #: rc.cpp:212 #, no-c-format msgid "A&nimate panel hiding" msgstr "A&nimer panelgøyming" #. i18n: file hidingtab.ui line 457 #: rc.cpp:215 #, no-c-format msgid "" "When this option is selected the panel will \"slide\" off the screen when " "hiding. The speed of the animation is controlled by the slider directly below." msgstr "" "Når denne funksjonen er på, vil panelet «skli» av skjermen når du gøymer det. " "Du kan velja farten på effekten med glidebrytaren nedanfor." #. i18n: file hidingtab.ui line 522 #: rc.cpp:218 #, no-c-format msgid "Determines how quickly the panel hides if hiding animation is enabled." msgstr "Vel kor fort panelet skal gøymast dersom gøymeanimasjonen er slått på." #. i18n: file hidingtab.ui line 558 #: rc.cpp:221 #, no-c-format msgid "Fast" msgstr "Rask" #. i18n: file hidingtab.ui line 599 #: rc.cpp:224 #, no-c-format msgid "Medium" msgstr "Middels" #. i18n: file hidingtab.ui line 623 #: rc.cpp:227 #, no-c-format msgid "Slow" msgstr "Sakte" #. i18n: file lookandfeeltab.ui line 16 #: rc.cpp:230 #, no-c-format msgid "" "If this option is selected, informational tooltips will appear when the mouse " "cursor moves over the icons, buttons and applets in the panel." msgstr "" "Med denne funksjonen kan du få nyttige verktøytips når du flyttar musepeikaren " "over ikona, knappane og appletane på panelet." #. i18n: file lookandfeeltab.ui line 30 #: rc.cpp:233 #, no-c-format msgid "General" msgstr "Generelt" #. i18n: file lookandfeeltab.ui line 41 #: rc.cpp:236 #, no-c-format msgid "Enable icon &mouseover effects" msgstr "Vis &ikoneffektar under musepeikaren" #. i18n: file lookandfeeltab.ui line 44 #: rc.cpp:239 #, no-c-format msgid "" "When this option is selected a mouseover effect appears when the mouse cursor " "is moved over panel buttons" msgstr "" "Her vel du om ein effekt skal visast når musepeikaren ligg over panelknappane." #. i18n: file lookandfeeltab.ui line 52 #: rc.cpp:242 #, no-c-format msgid "Show too<ips" msgstr "&Vis verktøytips" #. i18n: file lookandfeeltab.ui line 55 #: rc.cpp:245 #, no-c-format msgid "" "When this option is selected informational tooltips will appear when the mouse " "cursor moves over the icons, buttons and applets in the panel." msgstr "" "Med denne funksjonen kan du få nyttige verktøytips når du flyttar musepeikaren " "over ikona, knappane og appletane på panelet." #. i18n: file lookandfeeltab.ui line 65 #: rc.cpp:248 #, no-c-format msgid "Button Backgrounds" msgstr "Knappebakgrunn" #. i18n: file lookandfeeltab.ui line 76 #: rc.cpp:251 #, no-c-format msgid "&TDE menu:" msgstr "&K-meny:" #. i18n: file lookandfeeltab.ui line 82 #: rc.cpp:254 rc.cpp:278 #, no-c-format msgid "Choose a tile image for the TDE menu." msgstr "Vel eit bakgrunnsbilete for K-menyknappen." #. i18n: file lookandfeeltab.ui line 90 #: rc.cpp:257 #, no-c-format msgid "&QuickBrowser menus:" msgstr "&Lesarmenyar:" #. i18n: file lookandfeeltab.ui line 96 #: rc.cpp:260 rc.cpp:269 #, no-c-format msgid "Choose a tile image for Quick Browser buttons." msgstr "Vel eit bakgrunnsbilete for snøgglesarknappar." #. i18n: file lookandfeeltab.ui line 107 #: rc.cpp:266 rc.cpp:275 rc.cpp:290 rc.cpp:308 rc.cpp:335 #, no-c-format msgid "Custom Color" msgstr "Tilpassa farge" #. i18n: file lookandfeeltab.ui line 165 #: rc.cpp:281 #, no-c-format msgid "" "When the Custom Color option is selected, use this button to pick a color for " "quick browser tile backgrounds" msgstr "" "Når du har valt ein tilpassa farge, kan du velja bakgrunnsfargen på " "snøgglesarknappane her." #. i18n: file lookandfeeltab.ui line 176 #: rc.cpp:284 #, no-c-format msgid "" "When the Custom Color option is selected, use this button to pick a color for " "the TDE menu tile background" msgstr "" "Når du har valt ein tilpassa farge, kan du velja bakgrunnsfargen på " "K-menyknappen her." #. i18n: file lookandfeeltab.ui line 205 #: rc.cpp:293 rc.cpp:302 #, no-c-format msgid "Choose a tile image for window list buttons." msgstr "Vel eit bakgrunnsbilete for vindaugslista." #. i18n: file lookandfeeltab.ui line 216 #: rc.cpp:296 #, no-c-format msgid "" "When the Custom Color option is selected, use this button to pick a color for " "window list tile backgrounds" msgstr "" "Når du har valt ein tilpassa farge, kan du velja bakgrunnsfargen på " "vindaugslisteknappane her." #. i18n: file lookandfeeltab.ui line 224 #: rc.cpp:299 #, no-c-format msgid "&Window list:" msgstr "&Vindaugsliste:" #. i18n: file lookandfeeltab.ui line 259 #: rc.cpp:311 rc.cpp:320 #, no-c-format msgid "Choose a tile image for desktop access buttons." msgstr "Vel eit bakgrunnsbilete for knappar for skrivebordstilgang." #. i18n: file lookandfeeltab.ui line 270 #: rc.cpp:314 #, no-c-format msgid "" "When the Custom Color option is selected, use this button to pick a color for " "the desktop tile background" msgstr "" "Når du har valt ein tilpassa farge, kan du velja bakgrunnsfargen på " "skrivebordsknappen her." #. i18n: file lookandfeeltab.ui line 278 #: rc.cpp:317 #, no-c-format msgid "De&sktop access:" msgstr "&Skrivebordstilgang:" #. i18n: file lookandfeeltab.ui line 295 #: rc.cpp:323 #, no-c-format msgid "" "When the Custom Color option is selected, use this button to pick a color for " "application tile backgrounds" msgstr "" "Når du har valt ein tilpassa farge, kan du velja bakgrunnsfargen på " "programknappane her." #. i18n: file lookandfeeltab.ui line 303 #: rc.cpp:326 #, no-c-format msgid "Applicatio&ns:" msgstr "&Program:" #. i18n: file lookandfeeltab.ui line 309 #: rc.cpp:329 rc.cpp:338 #, no-c-format msgid "Choose a tile image for buttons that launch applications." msgstr "Vel eit bakgrunnsbilete for knappar som startar program." #. i18n: file lookandfeeltab.ui line 365 #: rc.cpp:341 #, no-c-format msgid "Panel Background" msgstr "Panelbakgrunn" #. i18n: file lookandfeeltab.ui line 396 #: rc.cpp:344 #, no-c-format msgid "Colorize to &match the desktop color scheme" msgstr "Bruk fargar som &passar til fargane på skrivebordet" #. i18n: file lookandfeeltab.ui line 402 #: rc.cpp:347 #, no-c-format msgid "" "If this option is selected, the panel background image will be colored to match " "the default colors. To change the default colors, go to the 'Colors' control " "module." msgstr "" "Her kan du velja om bakgrunnsbiletet på panelet skal fargeleggjast slik at det " "passar til standardfargane. Du kan endra standardfargane i kontrollmodulen " "«Fargar»." #. i18n: file lookandfeeltab.ui line 449 #: rc.cpp:350 #, no-c-format msgid "This is a preview for the selected background image." msgstr "Dette er ei førehandsvising av det valte bakgrunnsbiletet." #. i18n: file lookandfeeltab.ui line 469 #: rc.cpp:353 #, no-c-format msgid "" "Here you can choose a theme to be displayed by the panel. Press the 'Browse' " "button to choose a theme using the file dialog.\n" "This option is only active if 'Enable background image' is selected." msgstr "" "Her kan du velja eit tema for vising av panelet. Trykk knappen «Bla gjennom» " "for å velja eit tema frå fildialogen.Dette valet er berre aktivt dersom «Vis " "bakgrunnsbilete» er valt." #. i18n: file lookandfeeltab.ui line 477 #: rc.cpp:357 #, no-c-format msgid "Enable &background image" msgstr "Vis bakgrunnsbi&lete" #. i18n: file lookandfeeltab.ui line 485 #: rc.cpp:360 #, no-c-format msgid "Enable &transparency" msgstr "Slå på gjennomsik&t" #. i18n: file lookandfeeltab.ui line 503 #: rc.cpp:363 #, no-c-format msgid "Advanc&ed Options" msgstr "Avans&erte val" #. i18n: file lookandfeeltab.ui line 506 #: rc.cpp:366 #, no-c-format msgid "" "Click here to open the Advanced Options dialog. You can configure the applet " "handles look and feel, the tint transparency color and more." msgstr "" "Trykk her for å opna eit dialogvindauge med avanserte innstillingar. Der kan du " "tilpassa handtaka på panelprogramma, velja gjennomsiktfargen og anna." #. i18n: file menutab.ui line 27 #: rc.cpp:369 #, no-c-format msgid "TDE Menu" msgstr "K-meny" #. i18n: file menutab.ui line 49 #: rc.cpp:372 #, no-c-format msgid "Menu item format:" msgstr "Format for menyelement:" #. i18n: file menutab.ui line 55 #: rc.cpp:375 #, no-c-format msgid "Here you can choose how menu entries are shown." msgstr "Her kan du velja korleis menyval skal visast." #. i18n: file menutab.ui line 66 #: rc.cpp:378 #, no-c-format msgid "&Name only" msgstr "Berre &namn" #. i18n: file menutab.ui line 69 #: rc.cpp:381 #, no-c-format msgid "" "When this option is selected, items in the TDE Menu will appear with the " "application's name next to the icon." msgstr "" "Med dette valet, vil elementa i K-menyen ha programnamnet ved sida av ikonet." #. i18n: file menutab.ui line 77 #: rc.cpp:384 #, no-c-format msgid "Name - &Description" msgstr "Namn – &skildring" #. i18n: file menutab.ui line 83 #: rc.cpp:387 #, no-c-format msgid "" "When this option is selected, items in the TDE Menu will appear with the " "application's name and a brief description next to the icon." msgstr "" "Med dette valet vil elementa i K-menyen ha programnamnet og ei kort skildring " "ved sida av ikonet." #. i18n: file menutab.ui line 91 #: rc.cpp:390 #, no-c-format msgid "D&escription only" msgstr "Berre &skildring" #. i18n: file menutab.ui line 94 #: rc.cpp:393 #, no-c-format msgid "" "When this option is selected, items in the TDE Menu will appear with the " "application's brief description next to the icon." msgstr "" "Med dette valet vil elementa i K-menyen ha programskildringa ved sida av " "ikonet." #. i18n: file menutab.ui line 105 #: rc.cpp:396 #, no-c-format msgid "Des&cription (Name)" msgstr "&Skildring (Namn)" #. i18n: file menutab.ui line 108 #: rc.cpp:399 #, no-c-format msgid "" "When this option is selected, items in the TDE Menu will appear with a brief " "description and the application's name in brackets next to the icon." msgstr "" "Med dette valet, vil elementa i K-menyen ha ei kort skildring og programnamnet " "i parentes ved sida av ikonet." #. i18n: file menutab.ui line 118 #: rc.cpp:402 #, no-c-format msgid "Show side ima&ge" msgstr "Vis &sidebilete" #. i18n: file menutab.ui line 126 #: rc.cpp:405 #, no-c-format msgid "" "When this option is selected an image will appear down the left-hand side " "of the TDE Menu. The image will be tinted according to your color settings.\n" " \n" " " "

Tip: You can customize the image that appears in the TDE Menu by " "putting an image file called kside.png and a tileable image file called " "kside_tile.png in $TDEHOME/share/apps/kicker/pics." msgstr "" "Ved bruk av denne funksjonen vert eit bilete vist langs høgre sida av " "K-menyen. Biletet får fargetone i samsvar med fargeinnstillingane. " "

Tips: Du kan velja ditt eige bilete ved å leggja ei biletfil med " "namnet «kside.png» og bakgrunnsmønster «kside_tile.png» i katalogen " "$TDEHOME/share/apps/kicker/pics." #. i18n: file menutab.ui line 151 #: rc.cpp:410 #, no-c-format msgid "Edit &TDE Menu" msgstr "Rediger &K-meny" #. i18n: file menutab.ui line 154 #: rc.cpp:413 #, no-c-format msgid "" "Start the editor for the TDE menu. Here you can add, edit, remove and hide " "applications." msgstr "" "Start redigering av K-menyen. Her kan du leggja til, endra, fjerna og gøyma " "program." #. i18n: file menutab.ui line 162 #: rc.cpp:416 #, no-c-format msgid "Optional Menus" msgstr "Valfrie menyar" #. i18n: file menutab.ui line 192 #: rc.cpp:419 #, no-c-format msgid "" "This is a list of the dynamic menus that can be displayed in the TDE menu in " "addition to the normal applications. Use the checkboxes to add or remove menus." msgstr "" "Liste over tilgjengelege dynamiske menyar som kan pluggast inn i K-menyen. Bruk " "avkryssingsboksane for å leggja til eller fjerna element." #. i18n: file menutab.ui line 202 #: rc.cpp:422 #, no-c-format msgid "QuickBrowser Menus" msgstr "Snøgglesarmeny" #. i18n: file menutab.ui line 221 #: rc.cpp:425 #, no-c-format msgid "Ma&ximum number of entries:" msgstr "&Høgste tal på oppføringar:" #. i18n: file menutab.ui line 227 #: rc.cpp:428 rc.cpp:431 #, no-c-format msgid "" "When browsing directories that contain a lot of files, the QuickBrowser can " "sometimes hide your whole desktop. Here you can limit the number of entries " "shown at a time in the QuickBrowser. This is particularly useful for low screen " "resolutions." msgstr "" "Ved lesing av katalogar med mange filer kan snøgglesaren nokre gonger fylla " "heile skrivebordet. Her kan du avgrensa talet på oppføringar som vert viste på " "ein gong i snøgglesaren. Dette er spesielt nyttig ved låge skjermoppløysningar." #. i18n: file menutab.ui line 254 #: rc.cpp:434 #, no-c-format msgid "Show hidden fi&les" msgstr "Vis &gøymde filer" #. i18n: file menutab.ui line 260 #: rc.cpp:437 #, no-c-format msgid "" "If this option is enabled, hidden files (i.e. files beginning with a dot) will " "be shown in the QuickBrowser menus." msgstr "" "Dersom dette er valt, vert skjulte filer (altså filnamn som startar med eit " "punktum) viste i snøgglesaren." #. i18n: file menutab.ui line 287 #: rc.cpp:440 #, no-c-format msgid "QuickStart Menu Items" msgstr "«Snøggstart»-element" #. i18n: file menutab.ui line 306 #: rc.cpp:443 #, no-c-format msgid "Maxim&um number of entries:" msgstr "&Høgste tal på oppføringar:" #. i18n: file menutab.ui line 312 #: rc.cpp:446 #, no-c-format msgid "" "This option allows you to define the maximum number of applications that should " "be displayed in the QuickStart menu area." msgstr "" "Med denne funksjonen kan du velja det høgste talet på program som skal visast i " "snøggstartmenyen." #. i18n: file menutab.ui line 329 #: rc.cpp:449 #, no-c-format msgid "" "This option allows you to define how many applications should be displayed at " "most in the QuickStart menu area." msgstr "" "Med denne funksjonen kan du velja det høgste talet på program som skal visast i " "snøggstartmenyen." #. i18n: file menutab.ui line 339 #: rc.cpp:452 #, no-c-format msgid "Show the &applications most recently used" msgstr "&Vis nyleg bruka program" #. i18n: file menutab.ui line 345 #: rc.cpp:455 #, no-c-format msgid "" "When this option is selected the QuickStart menu area will be filled with the " "applications you have used most recently." msgstr "" "Ved bruk av denne funksjonen vil snøggstartmenyen innehalda dei programma du " "nyleg har bruka." #. i18n: file menutab.ui line 353 #: rc.cpp:458 #, no-c-format msgid "Show the applications most fre&quently used" msgstr "Vis &programma som vert bruka oftast" #. i18n: file menutab.ui line 356 #: rc.cpp:461 #, no-c-format msgid "" "When this option is selected the QuickStart menu area will be filled with the " "applications you use most frequently." msgstr "" "Ved bruk av denne funksjonen vil snøggstartmenyen innehalda dei programma du " "brukar oftast." #. i18n: file positiontab.ui line 17 #: rc.cpp:464 #, no-c-format msgid "" "This is a list of all the panels currently active on your desktop. Select one " "to configure." msgstr "" "Dette er ei liste over alle panela på skrivebordet. Vel panelet du vil setja " "opp." #. i18n: file positiontab.ui line 83 #: rc.cpp:470 #, no-c-format msgid "Screen" msgstr "Skjerm" #. i18n: file positiontab.ui line 139 #: rc.cpp:473 #, no-c-format msgid "" "This preview image shows how the panel will appear on your screen with the " "settings you have chosen. Clicking the buttons around the image will move the " "position of the panel, while moving the length slider and choosing different " "sizes will change the dimensions of the panel." msgstr "" "Dette biletet viser korleis panelet kjem til å sjå ut på skjermen med dei " "innstillingane du har valt. Trykk på knappane rundt biletet for å flytta " "panelet. Du kan òg endra lengda og panelstorleiken." #. i18n: file positiontab.ui line 191 #: rc.cpp:476 #, no-c-format msgid "Identify" msgstr "Identifiser" #. i18n: file positiontab.ui line 194 #: rc.cpp:479 #, no-c-format msgid "This button displays each monitor's identifying number" msgstr "Denne knappen viser identifikasjonsnummeret for kvar skjerm" #. i18n: file positiontab.ui line 212 #: rc.cpp:482 #, no-c-format msgid "&Xinerama screen:" msgstr "&Xinerama-skjerm:" #. i18n: file positiontab.ui line 223 #: rc.cpp:485 #, no-c-format msgid "" "This menu selects which screen the Panel will be displayed on in a " "multiple-monitor system" msgstr "" "Denne menyen vel kva for skjerm panelet skal visast på dersom du har fleire " "skjermar." #. i18n: file positiontab.ui line 260 #: rc.cpp:488 #, no-c-format msgid "Len>h" msgstr "L&engd" #. i18n: file positiontab.ui line 264 #: rc.cpp:491 #, no-c-format msgid "" "This group of settings determines how the panel is aligned, including\n" "how it is positioned on the screen and how much of the screen it should use." msgstr "" "Desse innstillingane avgjer kvar panelet skal liggja på skjermen og kor mykje " "av skjermen som skal brukast." #. i18n: file positiontab.ui line 312 #: rc.cpp:495 #, no-c-format msgid "" "This slider defines how much of the screen's edge will be occupied by the " "panel." msgstr "" "Med denne glidebrytaren kan du velja kor mykje av skjermkanten panelet skal " "dekkja." #. i18n: file positiontab.ui line 329 #: rc.cpp:498 #, no-c-format msgid "%" msgstr "%" #. i18n: file positiontab.ui line 332 #: rc.cpp:501 #, no-c-format msgid "" "This spinbox defines how much of the screen's edge will be occupied by the " "panel." msgstr "" "Med denne glidebrytaren kan du velja kor mykje av skjermkanten panelet skal " "dekkja." #. i18n: file positiontab.ui line 342 #: rc.cpp:504 #, no-c-format msgid "&Expand as required to fit contents" msgstr "&Utvid til å passa innhaldet" #. i18n: file positiontab.ui line 345 #: rc.cpp:507 #, no-c-format msgid "" "When this option is selected, the panel will grow as necessary to accommodate " "the buttons and applets on it." msgstr "" "Med denne funksjonen vert panelet utvida slik at det vert plass til knappar og " "miniprogram." #. i18n: file positiontab.ui line 380 #: rc.cpp:510 #, no-c-format msgid "Si&ze" msgstr "&Storleik" #. i18n: file positiontab.ui line 383 #: rc.cpp:513 #, no-c-format msgid "This sets the size of the panel." msgstr "Vel storleiken på panelet." #. i18n: file positiontab.ui line 392 #: rc.cpp:516 #, no-c-format msgid "Tiny" msgstr "Svært lite" #. i18n: file positiontab.ui line 397 #: rc.cpp:519 #, no-c-format msgid "Small" msgstr "Lite" #. i18n: file positiontab.ui line 402 #: rc.cpp:522 #, no-c-format msgid "Normal" msgstr "Normalt" #. i18n: file positiontab.ui line 407 #: rc.cpp:525 #, no-c-format msgid "Large" msgstr "Stort" #. i18n: file positiontab.ui line 484 #: rc.cpp:531 #, no-c-format msgid "This slider defines the panel size when the Custom option is selected." msgstr "Bruk denne glidebrytaren for å velja panelstorleiken fritt." #. i18n: file positiontab.ui line 507 #: rc.cpp:537 #, no-c-format msgid "This spinbox defines the panel size when the Custom option is selected." msgstr "Bruk denne rulleboksen for å velja panelstorleiken fritt." #. i18n: file positiontab.ui line 519 #: rc.cpp:540 #, no-c-format msgid "Position" msgstr "Posisjon" #. i18n: file positiontab.ui line 525 #: rc.cpp:543 #, no-c-format msgid "" "Here you can set the position of the panel highlighted on the left side. You " "can put any panel on top or bottom of the screen and on the left or right side " "of the screen. There you can put it into the center or into either corner of " "the screen." msgstr "" "Her kan du velja plasseringa av det panelet som er vist til venstre. Du kan " "leggja panela øvst eller nedst på skjermen, og til høgre eller venstre. Du kan " "òg velja om panelet skal liggja på midten eller inntil eit hjørne av skjermen." #. i18n: file positiontab.ui line 609 #: rc.cpp:546 #, no-c-format msgid "Alt+1" msgstr "Alt + 1" #. i18n: file positiontab.ui line 643 #: rc.cpp:549 #, no-c-format msgid "Alt+2" msgstr "Alt + 2" #. i18n: file positiontab.ui line 677 #: rc.cpp:552 #, no-c-format msgid "Alt+3" msgstr "Alt + 3" #. i18n: file positiontab.ui line 721 #: rc.cpp:555 #, no-c-format msgid "Alt+=" msgstr "Alt + =" #. i18n: file positiontab.ui line 755 #: rc.cpp:558 #, no-c-format msgid "Alt+-" msgstr "Alt + -" #. i18n: file positiontab.ui line 789 #: rc.cpp:561 #, no-c-format msgid "Alt+0" msgstr "Alt + 0" #. i18n: file positiontab.ui line 833 #: rc.cpp:564 #, no-c-format msgid "Alt+9" msgstr "Alt + 9" #. i18n: file positiontab.ui line 867 #: rc.cpp:567 #, no-c-format msgid "Alt+8" msgstr "Alt + 8" #. i18n: file positiontab.ui line 901 #: rc.cpp:570 #, no-c-format msgid "Alt+7" msgstr "Alt + 7" #. i18n: file positiontab.ui line 945 #: rc.cpp:573 #, no-c-format msgid "Alt+4" msgstr "Alt + 4" #. i18n: file positiontab.ui line 979 #: rc.cpp:576 #, no-c-format msgid "Alt+5" msgstr "Alt + 5" #. i18n: file positiontab.ui line 1013 #: rc.cpp:579 #, no-c-format msgid "Alt+6" msgstr "Alt + 6" #: rc.cpp:580 msgid "TDE Button" msgstr "TDE-knapp" #: rc.cpp:581 msgid "Blue Wood" msgstr "Blått treverk" #: rc.cpp:582 msgid "Green Wood" msgstr "Grønt treverk" #: rc.cpp:583 msgid "Light Gray" msgstr "Lys grått" #: rc.cpp:584 msgid "Light Green" msgstr "Lys grønt" #: rc.cpp:585 msgid "Light Pastel" msgstr "Lys pastell" #: rc.cpp:586 msgid "Light Purple" msgstr "Lys lilla" #: rc.cpp:587 msgid "Nuts And Bolts" msgstr "Mutrar og skruer" #: rc.cpp:588 msgid "Red Wood" msgstr "Raudt treverk" #: rc.cpp:589 msgid "Solid Blue" msgstr "Einsfarga blått" #: rc.cpp:590 msgid "Solid Gray" msgstr "Einsfarga grått" #: rc.cpp:591 msgid "Solid Green" msgstr "Einsfarga grønt" #: rc.cpp:592 msgid "Solid Orange" msgstr "Einsfarga oransje" #: rc.cpp:593 msgid "Solid Pastel" msgstr "Einsfarga pastell" #: rc.cpp:594 msgid "Solid Purple" msgstr "Einsfarga lilla" #: rc.cpp:595 msgid "Solid Red" msgstr "Einsfarga raudt" #: rc.cpp:596 msgid "Solid Tigereye" msgstr "Einsfarga tigerauge"