# translation of tdeprint.po to Punjabi # Amanpreet Singh Alam , 2004. # Amanpreet Singh Alam , 2005. # Amanpreet Singh Alam , 2005. # A S Alam , 2007. msgid "" msgstr "" "Project-Id-Version: tdeprint\n" "POT-Creation-Date: 2021-07-07 18:16+0000\n" "PO-Revision-Date: 2007-04-18 08:12+0530\n" "Last-Translator: A S Alam \n" "Language-Team: Punjabi \n" "Language: pa\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #. Instead of a literal translation, add your name to the end of the list (separated by a comma). msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "" #. Instead of a literal translation, add your email to the end of the list (separated by a comma). msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "" #: cups/cupsaddsmb2.cpp:56 cups/cupsaddsmb2.cpp:364 msgid "&Export" msgstr "ਨਿਰਯਾਤ(&E)" #: cups/cupsaddsmb2.cpp:62 msgid "Export Printer Driver to Windows Clients" msgstr "" #: cups/cupsaddsmb2.cpp:73 msgid "&Username:" msgstr "ਉਪਭੋਗਤਾ ਨਾਂ(&U):" #: cups/cupsaddsmb2.cpp:74 msgid "&Samba server:" msgstr "ਸਾਂਬਾ ਸਰਵਰ(&S):" #: cups/cupsaddsmb2.cpp:75 management/kmwpassword.cpp:50 msgid "&Password:" msgstr "ਗੁਪਤ-ਕੋਡ(&P):" #: cups/cupsaddsmb2.cpp:80 msgid "" "

Samba server

Adobe Windows PostScript driver files plus the " "CUPS printer PPD will be exported to the [print$] special share of " "the Samba server (to change the source CUPS server, use the " "Configure Manager -> CUPS server first). The [print" "$] share must exist on the Samba side prior to clicking the Export button below." msgstr "" #: cups/cupsaddsmb2.cpp:89 msgid "" "

Samba username

User needs to have write access to the [print" "$] share on the Samba server. [print$] holds printer drivers " "prepared for download to Windows clients. This dialog does not work for " "Samba servers configured with security = share (but works fine with " "security = user)." msgstr "" #: cups/cupsaddsmb2.cpp:97 msgid "" "

Samba password

The Samba setting encrypt passwords = yes (default) requires prior use of smbpasswd -a [username] " "command, to create an encrypted Samba password and have Samba recognize it." msgstr "" #: cups/cupsaddsmb2.cpp:268 #, c-format msgid "Creating folder %1" msgstr "ਫੋਲਡਰ %1 ਬਣਾਓ" #: cups/cupsaddsmb2.cpp:276 #, c-format msgid "Uploading %1" msgstr "%1 ਅੱਪਲੋਡ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ" #: cups/cupsaddsmb2.cpp:284 #, c-format msgid "Installing driver for %1" msgstr "" #: cups/cupsaddsmb2.cpp:292 #, c-format msgid "Installing printer %1" msgstr "" #: cups/cupsaddsmb2.cpp:334 msgid "Driver successfully exported." msgstr "" #: cups/cupsaddsmb2.cpp:344 msgid "" "Operation failed. Possible reasons are: permission denied or invalid Samba " "configuration (see cupsaddsmb manual page " "for detailed information, you need CUPS " "version 1.1.11 or higher). You may want to try again with another login/" "password." msgstr "" #: cups/cupsaddsmb2.cpp:353 msgid "Operation aborted (process killed)." msgstr "" #: cups/cupsaddsmb2.cpp:359 msgid "

Operation failed.

%1

" msgstr "" #: cups/cupsaddsmb2.cpp:374 msgid "" "You are about to prepare the %1 driver to be shared out to Windows " "clients through Samba. This operation requires the Adobe PostScript Driver, a " "recent version of Samba 2.2.x and a running SMB service on the target " "server. Click Export to start the operation. Read the cupsaddsmb manual page in Konqueror or type man " "cupsaddsmb in a console window to learn more about this functionality." msgstr "" #: cups/cupsaddsmb2.cpp:394 msgid "" "Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you need CUPS version 1.1.11 or higher)." msgstr "" #: cups/cupsaddsmb2.cpp:405 #, c-format msgid "Preparing to upload driver to host %1" msgstr "" #: cups/cupsaddsmb2.cpp:410 management/networkscanner.cpp:149 msgid "&Abort" msgstr "ਅਧੂਰਾ ਛੱਡੋ(&A)" #: cups/cupsaddsmb2.cpp:416 msgid "The driver for printer %1 could not be found." msgstr "" #: cups/cupsaddsmb2.cpp:456 #, c-format msgid "Preparing to install driver on host %1" msgstr "" #: cups/ippreportdlg.cpp:34 msgid "IPP Report" msgstr "IPP ਰਿਪੋਰਟ" #: cups/ippreportdlg.cpp:34 cups/ippreportdlg.cpp:41 kprintdialog.cpp:307 msgid "&Print" msgstr "ਛਾਪੋ(&P)" #: cups/ippreportdlg.cpp:93 msgid "Internal error: unable to generate HTML report." msgstr "" #: cups/ipprequest.cpp:164 msgid "You don't have access to the requested resource." msgstr "" #: cups/ipprequest.cpp:167 msgid "You are not authorized to access the requested resource." msgstr "" #: cups/ipprequest.cpp:170 msgid "The requested operation cannot be completed." msgstr "" #: cups/ipprequest.cpp:173 msgid "The requested service is currently unavailable." msgstr "" #: cups/ipprequest.cpp:176 msgid "The target printer is not accepting print jobs." msgstr "" #: cups/ipprequest.cpp:313 msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running." msgstr "" #: cups/ipprequest.cpp:316 msgid "The IPP request failed for an unknown reason." msgstr "" #: cups/ipprequest.cpp:461 msgid "Attribute" msgstr "ਗੁਣ" #: cups/ipprequest.cpp:462 msgid "Values" msgstr "ਮੁੱਲ" #: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 msgid "True" msgstr "ਸੱਚ" #: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 msgid "False" msgstr "ਝੂਠ" #: cups/kmconfigcups.cpp:32 msgid "CUPS Server" msgstr "" #: cups/kmconfigcups.cpp:33 msgid "CUPS Server Settings" msgstr "" #: cups/kmconfigcupsdir.cpp:34 msgid "Folder" msgstr "ਫੋਲਡਰ" #: cups/kmconfigcupsdir.cpp:35 msgid "CUPS Folder Settings" msgstr "CUPS ਫੋਲਡਰ ਸੈਟਿੰਗ" #: cups/kmconfigcupsdir.cpp:38 msgid "Installation Folder" msgstr "ਇੰਸਟਾਲੇਸ਼ਨ ਫੋਲਡਰ" #: cups/kmconfigcupsdir.cpp:41 msgid "Standard installation (/)" msgstr "" #: cups/kmcupsconfigwidget.cpp:65 msgid "Server Information" msgstr "ਸਰਵਰ ਜਾਣਕਾਰੀ" #: cups/kmcupsconfigwidget.cpp:66 msgid "Account Information" msgstr "ਖਾਤਾ ਜਾਣਕਾਰੀ" #: cups/kmcupsconfigwidget.cpp:67 rlpr/kmproxywidget.cpp:34 msgid "&Host:" msgstr "ਮੇਜ਼ਬਾਨ(&H):" #: cups/kmcupsconfigwidget.cpp:68 management/kmwsocketutil.cpp:53 #: management/networkscanner.cpp:339 rlpr/kmproxywidget.cpp:35 msgid "&Port:" msgstr "ਪੋਰਟ(&P):" #: cups/kmcupsconfigwidget.cpp:75 msgid "&User:" msgstr "ਉਪਭੋਗਤਾ(&U):" #: cups/kmcupsconfigwidget.cpp:76 msgid "Pass&word:" msgstr "ਗੁਪਤ-ਕੋਡ(&w):" #: cups/kmcupsconfigwidget.cpp:79 msgid "&Store password in configuration file" msgstr "" #: cups/kmcupsconfigwidget.cpp:81 msgid "Use &anonymous access" msgstr "" #: cups/kmcupsjobmanager.cpp:349 msgid "Job Report" msgstr "" #: cups/kmcupsjobmanager.cpp:351 cups/kmcupsjobmanager.cpp:456 msgid "Unable to retrieve job information: " msgstr "" #: cups/kmcupsjobmanager.cpp:360 msgid "&Job IPP Report" msgstr "" #: cups/kmcupsjobmanager.cpp:362 msgid "&Increase Priority" msgstr "" #: cups/kmcupsjobmanager.cpp:364 msgid "&Decrease Priority" msgstr "" #: cups/kmcupsjobmanager.cpp:366 msgid "&Edit Attributes..." msgstr "" #: cups/kmcupsjobmanager.cpp:419 msgid "Unable to change job priority: " msgstr "" #: cups/kmcupsjobmanager.cpp:477 #, c-format msgid "Unable to find printer %1." msgstr "" #: cups/kmcupsjobmanager.cpp:494 msgid "Attributes of Job %1@%2 (%3)" msgstr "" #: cups/kmcupsjobmanager.cpp:516 msgid "Unable to set job attributes: " msgstr "" #: cups/kmcupsmanager.cpp:651 lpr/matichandler.cpp:254 lpr/matichandler.cpp:358 msgid "" "Unable to find the executable foomatic-datafile in your PATH. Check that " "Foomatic is correctly installed." msgstr "" #: cups/kmcupsmanager.cpp:683 lpr/matichandler.cpp:286 lpr/matichandler.cpp:405 msgid "" "Unable to create the Foomatic driver [%1,%2]. Either that driver does not " "exist, or you don't have the required permissions to perform that operation." msgstr "" #: cups/kmcupsmanager.cpp:840 msgid "Library cupsdconf not found. Check your installation." msgstr "" #: cups/kmcupsmanager.cpp:846 msgid "Symbol %1 not found in cupsdconf library." msgstr "" #: cups/kmcupsmanager.cpp:941 msgid "&Export Driver..." msgstr "" #: cups/kmcupsmanager.cpp:943 msgid "&Printer IPP Report" msgstr "" #: cups/kmcupsmanager.cpp:994 cups/kmwippprinter.cpp:218 #, c-format msgid "IPP Report for %1" msgstr "" #: cups/kmcupsmanager.cpp:998 msgid "Unable to retrieve printer information. Error received:" msgstr "" #: cups/kmcupsmanager.cpp:1011 msgid "Server" msgstr "ਸਰਵਰ" #: cups/kmcupsmanager.cpp:1051 #, c-format msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running. Error: %1." msgstr "" #: cups/kmcupsmanager.cpp:1052 msgid "the IPP request failed for an unknown reason" msgstr "" #: cups/kmcupsmanager.cpp:1086 msgid "connection refused" msgstr "" #: cups/kmcupsmanager.cpp:1089 msgid "host not found" msgstr "" #: cups/kmcupsmanager.cpp:1093 msgid "read failed (%1)" msgstr "" #: cups/kmcupsmanager.cpp:1097 msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running. Error: %2: %1." msgstr "" #: cups/kmcupsuimanager.cpp:87 msgid "" "

Print queue on remote CUPS server

Use this for a print queue " "installed on a remote machine running a CUPS server. This allows to use " "remote printers when CUPS browsing is turned off.

" msgstr "" #: cups/kmcupsuimanager.cpp:94 msgid "" "

Network IPP printer

Use this for a network-enabled printer " "using the IPP protocol. Modern high-end printers can use this mode. Use this " "mode instead of TCP if your printer can do both.

" msgstr "" #: cups/kmcupsuimanager.cpp:101 msgid "" "

Fax/Modem printer

Use this for a fax/modem printer. This " "requires the installation of the fax4CUPS backend. Documents sent on this printer will be " "faxed to the given target fax number.

" msgstr "" #: cups/kmcupsuimanager.cpp:108 msgid "" "

Other printer

Use this for any printer type. To use this " "option, you must know the URI of the printer you want to install. Refer to " "the CUPS documentation for more information about the printer URI. This " "option is mainly useful for printer types using 3rd party backends not " "covered by the other possibilities.

" msgstr "" #: cups/kmcupsuimanager.cpp:116 msgid "" "

Class of printers

Use this to create a class of printers. When " "sending a document to a class, the document is actually sent to the first " "available (idle) printer in the class. Refer to the CUPS documentation for " "more information about class of printers.

" msgstr "" #: cups/kmcupsuimanager.cpp:129 msgid "Re&mote CUPS server (IPP/HTTP)" msgstr "" #: cups/kmcupsuimanager.cpp:130 msgid "Network printer w/&IPP (IPP/HTTP)" msgstr "" #: cups/kmcupsuimanager.cpp:131 msgid "S&erial Fax/Modem printer" msgstr "" #: cups/kmcupsuimanager.cpp:132 msgid "Other &printer type" msgstr "" #: cups/kmcupsuimanager.cpp:134 msgid "Cl&ass of printers" msgstr "" #: cups/kmcupsuimanager.cpp:190 msgid "An error occurred while retrieving the list of available backends:" msgstr "" #: cups/kmcupsuimanager.cpp:236 msgid "Priority" msgstr "ਦਰਜਾ" #: cups/kmcupsuimanager.cpp:238 msgid "Billing Information" msgstr "" #: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92 msgid "&Starting banner:" msgstr "" #: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93 msgid "&Ending banner:" msgstr "" #: cups/kmpropbanners.cpp:49 kpgeneralpage.cpp:298 msgid "Banners" msgstr "ਬੈਨਰ" #: cups/kmpropbanners.cpp:50 msgid "Banner Settings" msgstr "ਬੈਨਰ ਸੈਟਿੰਗ" #: cups/kmpropquota.cpp:39 cups/kmwquota.cpp:96 msgid "&Period:" msgstr "ਪੀਰੀਅਡ(&P):" #: cups/kmpropquota.cpp:40 cups/kmwquota.cpp:97 msgid "&Size limit (KB):" msgstr "ਆਕਾਰ ਲਿਮਟ(KB)(&S):" #: cups/kmpropquota.cpp:41 cups/kmwquota.cpp:98 msgid "&Page limit:" msgstr "" #: cups/kmpropquota.cpp:57 msgid "Quotas" msgstr "" #: cups/kmpropquota.cpp:58 msgid "Quota Settings" msgstr "" #: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84 msgid "No quota" msgstr "ਕੋਈ ਕੋਟਾ ਨਹੀਂ" #: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87 #: cups/kmwquota.cpp:90 msgid "None" msgstr "ਕੋਈ ਨਹੀਂ" #: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39 msgid "Users" msgstr "ਉਪਭੋਗਤਾ" #: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36 msgid "Users Access Settings" msgstr "ਉਪਭੋਗੀ ਵਰਤੋਂ ਸੈਟਿੰਗ" #: cups/kmpropusers.cpp:55 msgid "Denied users" msgstr "" #: cups/kmpropusers.cpp:62 msgid "Allowed users" msgstr "" #: cups/kmpropusers.cpp:76 msgid "All users allowed" msgstr "" #: cups/kmwbanners.cpp:57 msgid "No Banner" msgstr "ਕੋਈ ਬੈਨਰ ਨਹੀਂ" #: cups/kmwbanners.cpp:58 msgid "Classified" msgstr "ਵਰਗਕ੍ਰਿਤ" #: cups/kmwbanners.cpp:59 msgid "Confidential" msgstr "ਗੁਪਤ" #: cups/kmwbanners.cpp:60 msgid "Secret" msgstr "ਗੁਪਤ" #: cups/kmwbanners.cpp:61 msgid "Standard" msgstr "ਸਟੈਂਡਰਡ" #: cups/kmwbanners.cpp:62 msgid "Top Secret" msgstr "ਬਹੁਤ ਗੁਪਤ" #: cups/kmwbanners.cpp:63 msgid "Unclassified" msgstr "ਨਾ-ਵਰਗੀਕ੍ਰਿਤ" #: cups/kmwbanners.cpp:86 msgid "Banner Selection" msgstr "ਬੈਨਰ ਚੋਣ" #: cups/kmwbanners.cpp:99 msgid "" "

Select the default banners associated with this printer. These banners " "will be inserted before and/or after each print job sent to the printer. If " "you don't want to use banners, select No Banner.

" msgstr "" #: cups/kmwfax.cpp:39 msgid "Fax Serial Device" msgstr "" #: cups/kmwfax.cpp:43 msgid "

Select the device which your serial Fax/Modem is connected to.

" msgstr "" #: cups/kmwfax.cpp:81 msgid "You must select a device." msgstr "" #: cups/kmwipp.cpp:35 msgid "Remote IPP server" msgstr "" #: cups/kmwipp.cpp:39 msgid "" "

Enter the information concerning the remote IPP server owning the " "targeted printer. This wizard will poll the server before continuing.

" msgstr "" #: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 #: rlpr/kmwrlpr.cpp:62 msgid "Host:" msgstr "ਮੇਜ਼ਬਾਨ:" #: cups/kmwipp.cpp:43 msgid "Port:" msgstr "ਪੋਰਟ:" #: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 msgid "Empty server name." msgstr "" #: cups/kmwipp.cpp:59 msgid "Incorrect port number." msgstr "" #: cups/kmwipp.cpp:72 msgid "Unable to connect to %1 on port %2 ." msgstr "" #: cups/kmwippprinter.cpp:45 msgid "IPP Printer Information" msgstr "" #: cups/kmwippprinter.cpp:55 msgid "&Printer URI:" msgstr "" #: cups/kmwippprinter.cpp:64 msgid "" "

Either enter the printer URI directly, or use the network scanning " "facility.

" msgstr "" #: cups/kmwippprinter.cpp:65 msgid "&IPP Report" msgstr "" #: cups/kmwippprinter.cpp:112 msgid "You must enter a printer URI." msgstr "" #: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:117 msgid "No printer found at this address/port." msgstr "" #: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:136 msgid "" "_: Unknown host - 1 is the IP\n" " (%1)" msgstr "" #: cups/kmwippprinter.cpp:173 msgid "Name: %1
" msgstr "" #: cups/kmwippprinter.cpp:174 msgid "Location: %1
" msgstr "" #: cups/kmwippprinter.cpp:175 msgid "Description: %1
" msgstr "" #: cups/kmwippprinter.cpp:182 msgid "Model: %1
" msgstr "" #: cups/kmwippprinter.cpp:187 kmprinter.cpp:139 msgid "Idle" msgstr "ਬੇਕਾਰ" #: cups/kmwippprinter.cpp:188 kmprinter.cpp:141 msgid "Stopped" msgstr "ਰੁਕਿਆ" #: cups/kmwippprinter.cpp:189 kmjob.cpp:111 kmprinter.cpp:140 msgid "Processing..." msgstr "ਕਾਰਵਾਈ ਜਾਰੀ ਹੈ..." #: cups/kmwippprinter.cpp:190 kmjob.cpp:132 kmprinter.cpp:142 msgid "" "_: Unknown State\n" "Unknown" msgstr "" #: cups/kmwippprinter.cpp:192 msgid "State: %1
" msgstr "" #: cups/kmwippprinter.cpp:199 #, c-format msgid "Unable to retrieve printer info. Printer answered:

%1" msgstr "" #: cups/kmwippprinter.cpp:222 msgid "Unable to generate report. IPP request failed with message: %1 (0x%2)." msgstr "" #: cups/kmwippselect.cpp:38 msgid "Remote IPP Printer Selection" msgstr "" #: cups/kmwippselect.cpp:51 msgid "You must select a printer." msgstr "ਤੁਹਾਨੂੰ ਇੱਕ ਪਰਿੰਟਰ ਚੁਣਨਾ ਪਵੇਗਾ।" #: cups/kmwother.cpp:41 msgid "URI Selection" msgstr "" #: cups/kmwother.cpp:46 msgid "" "

Enter the URI corresponding to the printer to be installed. Examples:

  • smb://[login[:passwd]@]server/printer
  • lpd://server/queue
  • parallel:/dev/lp0
" msgstr "" #: cups/kmwother.cpp:51 management/kminfopage.cpp:52 #: management/kmpropbackend.cpp:35 management/kmwlocal.cpp:54 msgid "URI:" msgstr "URI:" #: cups/kmwother.cpp:78 msgid "CUPS Server %1:%2" msgstr "" #: cups/kmwquota.cpp:46 msgid "second(s)" msgstr "" #: cups/kmwquota.cpp:47 msgid "minute(s)" msgstr "ਮਿੰਟ" #: cups/kmwquota.cpp:48 msgid "hour(s)" msgstr "ਘੰਟੇ" #: cups/kmwquota.cpp:49 msgid "day(s)" msgstr "ਦਿਨ" #: cups/kmwquota.cpp:50 msgid "week(s)" msgstr "ਹਫਤਾ" #: cups/kmwquota.cpp:51 msgid "month(s)" msgstr "ਮਹੀਨੇ" #: cups/kmwquota.cpp:79 msgid "Printer Quota Settings" msgstr "" #: cups/kmwquota.cpp:104 msgid "" "

Set here the quota for this printer. Using limits of 0 means that " "no quota will be used. This is equivalent to set quota period to No " "quota (-1). Quota limits are defined on a per-user base and " "applied to all users.

" msgstr "" #: cups/kmwquota.cpp:130 msgid "You must specify at least one quota limit." msgstr "" #: cups/kmwusers.cpp:41 msgid "Allowed Users" msgstr "ਸਵੀਕਾਰ ਉਪਭੋਗਤਾ" #: cups/kmwusers.cpp:42 msgid "Denied Users" msgstr "ਪਾਬੰਦੀਸ਼ੁਦਾ ਉਪਭੋਗੀ" #: cups/kmwusers.cpp:44 msgid "Define here a group of allowed/denied users for this printer." msgstr "" #: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117 msgid "&Type:" msgstr "ਕਿਸਮ(&T):" #: cups/kphpgl2page.cpp:33 msgid "" " Print in Black Only (Blackplot)

The 'blackplot' option " "specifies that all pens should plot in black-only: The default is to use the " "colors defined in the plot file, or the standard pen colors defined in the " "HP-GL/2 reference manual from Hewlett Packard.



" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:

    -o "
"blackplot=true  

" msgstr "" #: cups/kphpgl2page.cpp:48 msgid "" " Scale Print Image to Page Size

The 'fitplot' option " "specifies that the HP-GL image should be scaled to fill exactly the page " "with the (elsewhere selected) media size.

The default is 'fitplot " "is disabled'. The default will therefore use the absolute distances " "specified in the plot file. (You should be aware that HP-GL files are very " "often CAD drawings intended for large format plotters. On standard office " "printers they will therefore lead to the drawing printout being spread " "across multiple pages.)

Note:This feature depends upon an " "accurate plot size (PS) command in the HP-GL/2 file. If no plot size is " "given in the file the filter converting the HP-GL to PostScript assumes the " "plot is ANSI E size.



Additional hint for power " "users: This TDEPrint GUI element matches with the CUPS commandline job " "option parameter:

     -o fitplot=true   

" msgstr "" #: cups/kphpgl2page.cpp:68 msgid "" " Set Pen Width for HP-GL (if not defined in file).

The pen " "width value can be set here in case the original HP-GL file does not have " "it set. The pen width specifies the value in micrometers. The default value " "of 1000 produces lines that are 1000 micrometers == 1 millimeter in width. " "Specifying a pen width of 0 produces lines that are exactly 1 pixel wide.

Note: The penwidth option set here is ignored if the pen " "widths are set inside the plot file itself..



" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:

    -o "
"penwidth=...   # example: \"2000\" or \"500\"  

" msgstr "" #: cups/kphpgl2page.cpp:85 msgid "" " HP-GL Print Options

All options on this page are only " "applicable if you use TDEPrint to send HP-GL and HP-GL/2 files to one of " "your printers.

HP-GL and HP-GL/2 are page description languages " "developed by Hewlett-Packard to drive Pen Plotting devices.

" "

TDEPrint can (with the help of CUPS) convert the HP-GL file format and " "print it on any installed printer.

Note 1: To print HP-GL " "files, start 'kprinter' and simply load the file into the running kprinter." "

Note 2: The 'fitplot' parameter provided on this dialog does " "also work for printing PDF files (if your CUPS version is more recent than " "1.1.22).



Additional hint for power users: " "These TDEPrint GUI elements match with CUPS commandline job option " "parameters:

     -o blackplot=...  # examples: \"true\" or \"false"
"\"  
-o fitplot=... # examples: \"true\" or \"false\"
-" "o penwidth=... # examples: \"true\" or \"false\"

" msgstr "" #: cups/kphpgl2page.cpp:113 msgid "HP-GL/2 Options" msgstr "" #: cups/kphpgl2page.cpp:115 msgid "&Use only black pen" msgstr "" #: cups/kphpgl2page.cpp:118 msgid "&Fit plot to page" msgstr "" #: cups/kphpgl2page.cpp:122 msgid "&Pen width:" msgstr "" #: cups/kpimagepage.cpp:44 msgid "" "

Brightness: Slider to control the brightness value of all " "colors used.

The brightness value can range from 0 to 200. Values " "greater than 100 will lighten the print. Values less than 100 will darken " "the print.



Additional hint for power users: " "This TDEPrint GUI element matches with the CUPS commandline job option " "parameter:

    -o brightness=...      # use range from \"0\" to "
"\"200\"  

" msgstr "" #: cups/kpimagepage.cpp:58 msgid "" "

Hue (Tint): Slider to control the hue value for color " "rotation.

The hue value is a number from -360 to 360 and represents " "the color hue rotation. The following table summarizes the change you will " "see for the base colors:

" " " " " " " "
Original hue=-45 hue=45
Red Purple Yellow-" "orange
Green Yellow-greenBlue-green
Yellow Orange Green-yellow
BlueSky-blue Purple
Magenta Indigo Crimson
Cyan Blue-green Light-navy-blue


Additional hint for " "power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter:

    -o hue=...     # use range "
"from \"-360\" to \"360\"  

" msgstr "" #: cups/kpimagepage.cpp:83 msgid "" "

Saturation: Slider to control the saturation value for all " "colors used.

The saturation value adjusts the saturation of the " "colors in an image, similar to the color knob on your television. The color " "saturation value.can range from 0 to 200. On inkjet printers, a higher " "saturation value uses more ink. On laserjet printers, a higher saturation " "uses more toner. A color saturation of 0 produces a black-and-white print, " "while a value of 200 will make the colors extremely intense.


" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

    -o saturation=...      # use range from \"0\" to \"200\"  
" msgstr "" #: cups/kpimagepage.cpp:101 msgid "" "

Gamma: Slider to control the gamma value for color " "correction.

The gamma value can range from 1 to 3000. A gamma " "values greater than 1000 lightens the print. A gamma value less than 1000 " "darken the print. The default gamma is 1000.

Note:

the " "gamma value adjustment is not visible in the thumbnail preview.


" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

    -o gamma=...      # use range from \"1\" to \"3000\"  

" "
" msgstr "" #: cups/kpimagepage.cpp:118 msgid "" "

Image Printing Options

All options controlled on " "this page only apply to printing images. Most image file formats are " "supported. To name a few: JPEG, TIFF, PNG, GIF, PNM (PBM/PGM/PNM/PPM), Sun " "Raster, SGI RGB, Windows BMP. Options to influence color output of image " "printouts are:

  • Brightness
  • Hue
  • " "Saturation
  • Gamma

For a more detailed " "explanation about Brightness, Hue, Saturation and Gamma settings, please " "look at the 'WhatsThis' items provided for these controls.

" msgstr "" #: cups/kpimagepage.cpp:136 msgid "" "

Coloration Preview Thumbnail

The coloration preview " "thumbnail indicates change of image coloration by different settings. " "Options to influence output are:

  • Brightness
  • Hue " "(Tint)
  • Saturation
  • Gamma

" "

For a more detailed explanation about Brightness, Hue, Saturation and " "Gamma settings, please look at the 'WhatsThis' items provided for these " "controls.

" msgstr "" #: cups/kpimagepage.cpp:152 msgid "" "

Image Size: Dropdown menu to control the image size on the " "printed paper. Dropdown works in conjunction with slider below. Dropdown " "options are:.

  • Natural Image Size: Image prints in its " "natural image size. If it does not fit onto one sheet, the printout will be " "spread across multiple sheets. Note, that the slider is disabled when " "selecting 'natural image size' in the dropdown menu.
  • " "Resolution (ppi): The resolution value slider covers a number range " "from 1 to 1200. It specifies the resolution of the image in Pixels Per Inch " "(PPI). An image that is 3000x2400 pixels will print 10x8 inches at 300 " "pixels per inch, for example, but 5x4 inches at 600 pixels per inch. If the " "specified resolution makes the image larger than the page, multiple pages " "will be printed. Resolution defaults to 72 ppi.
  • % of Page " "Size: The percent value slider covers numbers from 1 to 800. It " "specifies the size in relation to the page (not the image). A scaling of " "100 percent will fill the page as completely as the image aspect ratio " "allows (doing auto-rotation of the image as needed). A scaling of more than " "100 will print the image across multiple sheets. A scaling of 200 percent " "will print on up to 4 pages.
  • Scaling in % of page size defaults to 100 " "%.
  • % of Natural Image Size: The percent value slider moves from " "1 to 800. It specifies the printout size in relation to the natural image " "size. A scaling of 100 percent will print the image at its natural size, " "while a scaling of 50 percent will print the image at half its natural " "size. If the specified scaling makes the image larger than the page, " "multiple pages will be printed. Scaling in % of natural image size defaults " "to 100 %.


Additional hint for power users: " "This TDEPrint GUI element matches with the CUPS commandline job option " "parameter:

     -o natural-scaling=...     # range in  %  is "
"1....800  
-o scaling=... # range in % is 1....800 " "
-o ppi=... # range in ppi is 1...1200

" "
" msgstr "" #: cups/kpimagepage.cpp:192 msgid "" "

Position Preview Thumbnail

This position preview " "thumbnail indicates the position of the image on the paper sheet.

Click " "on horizontal and vertical radio buttons to move image alignment on paper " "around. Options are:

  • center
  • top
  • " "
  • top-left
  • left
  • bottom-left
  • " "bottom
  • bottom-right
  • right
  • top-" "right

" msgstr "" #: cups/kpimagepage.cpp:210 msgid "" "

Reset to Default Values

Reset all coloration " "settings to default values. Default values are:

  • Brightness: 100 " "
  • Hue (Tint). 0
  • Saturation: 100
  • Gamma: " "1000

" msgstr "" #: cups/kpimagepage.cpp:222 msgid "" "

Image Positioning:

Select a pair of radiobuttons " "to move image to the position you want on the paper printout. Default is " "'center'.



Additional hint for power users: " "This TDEPrint GUI element matches with the CUPS commandline job option " "parameter:

    -o position=...       # examples: \"top-left\" or "
"\"bottom\"  

" msgstr "" #: cups/kpimagepage.cpp:237 msgid "Image" msgstr "ਪ੍ਰਤੀਬਿੰਬ" #: cups/kpimagepage.cpp:239 msgid "Color Settings" msgstr "ਰੰਗ ਸੈਟਿੰਗ" #: cups/kpimagepage.cpp:241 msgid "Image Size" msgstr "ਚਿੱਤਰ ਅਕਾਰ" #: cups/kpimagepage.cpp:243 msgid "Image Position" msgstr "ਚਿੱਤਰ ਥਾਂ" #: cups/kpimagepage.cpp:247 msgid "&Brightness:" msgstr "ਚਮਕੀਲਾਪਨ(&B):" #: cups/kpimagepage.cpp:252 msgid "&Hue (Color rotation):" msgstr "" #: cups/kpimagepage.cpp:257 msgid "&Saturation:" msgstr "" #: cups/kpimagepage.cpp:262 msgid "&Gamma (Color correction):" msgstr "" #: cups/kpimagepage.cpp:283 msgid "&Default Settings" msgstr "" #: cups/kpimagepage.cpp:289 msgid "Natural Image Size" msgstr "" #: cups/kpimagepage.cpp:290 msgid "Resolution (ppi)" msgstr "" #: cups/kpimagepage.cpp:292 #, no-c-format msgid "% of Page" msgstr "" #: cups/kpimagepage.cpp:294 #, no-c-format msgid "% of Natural Image Size" msgstr "" #: cups/kpimagepage.cpp:304 msgid "&Image size type:" msgstr "" #: cups/kpschedulepage.cpp:40 msgid "" "

Print Job Billing and Accounting

Insert a meaningful " "string here to associate the current print job with a certain account. This " "string will appear in the CUPS \"page_log\" to help with the print " "accounting in your organization. (Leave it empty if you do not need it.)

" "It is useful for people who print on behalf of different \"customers\", like " "print service bureaux, letter shops, press and prepress companies, or " "secretaries who serve different bosses, etc.



" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:

    -o "
"job-billing=...         # example: \"Marketing_Department\" or \"Joe_Doe\"  "
"

" msgstr "" #: cups/kpschedulepage.cpp:60 msgid "" "

Scheduled Printing

Scheduled printing lets you " "control the time of the actual printout, while you can still send away your " "job now and have it out of your way.

Especially useful is the " "\"Never (hold indefinitely)\" option. It allows you to park your job until a " "time when you (or a printer administrator) decides to manually release it. " "

This is often required in enterprise environments, where you normally " "are not allowed to directly and immediately access the huge production " "printers in your Central Repro Department. However it is okay to " "send jobs to the queue which is under the control of the operators (who, " "after all, need to make sure that the 10,000 sheets of pink paper which is " "required by the Marketing Department for a particular job are available and " "loaded into the paper trays).



Additional hint for " "power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter:

    -o job-hold-until=...      "
"# example: \"indefinite\" or \"no-hold\"  

" msgstr "" #: cups/kpschedulepage.cpp:87 msgid "" "

Page Labels

Page Labels are printed by CUPS at the " "top and bottom of each page. They appear on the pages surrounded by a little " "frame box.

They contain any string you type into the line edit field.

" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

    -o page-label=\"...\"      # example: \"Company Confidential\"   

" msgstr "" #: cups/kpschedulepage.cpp:102 msgid "" "

Job Priority

Usually CUPS prints all jobs per queue " "according to the \"FIFO\" principle: First In, First Out.

The " "job priority option allows you to re-order the queue according to your " "needs.

It works in both directions: you can increase as well as decrease " "priorities. (Usually you can only control your own jobs).

Since " "the default job priority is \"50\", any job sent with, for example, \"49\" " "will be printed only after all those others have finished. Conversely, a " "\"51\" or higher priority job will go right to the top of a populated queue " "(if no other, higher prioritized one is present).



" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:

    -o "
"job-priority=...   # example: \"10\" or \"66\" or \"99\"  

" msgstr "" #: cups/kpschedulepage.cpp:126 msgid "Advanced Options" msgstr "ਤਕਨੀਕੀ ਚੋਣ" #: cups/kpschedulepage.cpp:137 msgid "Immediately" msgstr "ਤਰੁੰਤ" #: cups/kpschedulepage.cpp:138 msgid "Never (hold indefinitely)" msgstr "ਕਦੇ ਨਹੀਂ (ਰੋਕੀ ਰੱਖੋ)" #: cups/kpschedulepage.cpp:139 msgid "Daytime (6 am - 6 pm)" msgstr "ਦਿਨ ਸਮੇਂ (ਸਵੇਰ 6 - ਸ਼ਾਮ 6)" #: cups/kpschedulepage.cpp:140 msgid "Evening (6 pm - 6 am)" msgstr "ਆਥਣੇ (ਸ਼ਾਮ 6 - ਸਵੇਰ 6)" #: cups/kpschedulepage.cpp:141 msgid "Night (6 pm - 6 am)" msgstr "ਰਾਤ (ਸ਼ਾਮ 6 - ਸਵੇਰ 6)" #: cups/kpschedulepage.cpp:142 msgid "Weekend" msgstr "ਹਫ਼ਤਾ ਅੰਤ" #: cups/kpschedulepage.cpp:143 msgid "Second Shift (4 pm - 12 am)" msgstr "" #: cups/kpschedulepage.cpp:144 msgid "Third Shift (12 am - 8 am)" msgstr "" #: cups/kpschedulepage.cpp:145 msgid "Specified Time" msgstr "ਦਿੱਤੇ ਸਮੇਂ" #: cups/kpschedulepage.cpp:160 msgid "&Scheduled printing:" msgstr "" #: cups/kpschedulepage.cpp:163 msgid "&Billing information:" msgstr "" #: cups/kpschedulepage.cpp:166 msgid "T&op/Bottom page label:" msgstr "ਸਫ਼ਾ ਉੱਤੇ/ਹੇਠਾਂ ਲੇਬਲ(&o):" #: cups/kpschedulepage.cpp:169 msgid "&Job priority:" msgstr "ਕੰਮ ਦਰਜਾ(&J):" #: cups/kpschedulepage.cpp:200 msgid "The time specified is not valid." msgstr "" #: cups/kptagspage.cpp:36 msgid "" "

Additional Tags

You may send additional commands to the " "CUPS server via this editable list. There are 3 purposes for this:
    " "
  • Use any current or future standard CUPS job option not supported by the " "TDEPrint GUI.
  • Control any custom job option you may want to " "support in custom CUPS filters and backends plugged into the CUPS filtering " "chain.
  • Send short messages to the operators of your production " "printers in your Central Repro Department.

Standard " "CUPS job options: A complete list of standard CUPS job options is in " "the CUPS User Manual. " "Mappings of the kprinter user interface widgets to respective CUPS job " "option names are named in the various WhatsThis help items..

" "

Custom CUPS job options: CUPS print servers may be customized with " "additional print filters and backends which understand custom job options. " "You can specify such custom job options here. If in doubt, ask your system " "administrator..

Operator Messages: You may " "send additional messages to the operator(s) of your production printers (e." "g. in your Central Repro Department

) Messages can be read by the " "operator(s) (or yourself) by viewing the \"Job IPP Report\" for the " "job.

Examples:
 A standard CUPS job option:
" "(Name) number-up -- (Value) 9

A job option for custom CUPS filters or " "backends:
(Name) DANKA_watermark -- (Value) " "Company_Confidential

A message to the operator(s):
" "(Name) Deliver_after_completion -- (Value) to_Marketing_Departm." "

Note: the fields must not include spaces, tabs or " "quotes. You may need to double-click on a field to edit it.

Warning: Do not use such standard CUPS option names which also can be used " "through the TDEPrint GUI. Results may be unpredictable if they conflict, " "or if they are sent multiple times. For all options supported by the GUI, " "please do use the GUI. (Each GUI element's 'WhatsThis' names the related " "CUPS option name.)

" msgstr "" #: cups/kptagspage.cpp:77 msgid "Additional Tags" msgstr "ਹੋਰ ਟੈਗ" #: cups/kptagspage.cpp:82 kpfilterpage.cpp:406 management/kmjobviewer.cpp:239 #: management/kmwend.cpp:51 management/kxmlcommanddlg.cpp:141 #: management/kxmlcommanddlg.cpp:545 tdefilelist.cpp:101 msgid "Name" msgstr "ਨਾਂ" #: cups/kptagspage.cpp:83 msgid "Value" msgstr "ਮੁੱਲ" #: cups/kptagspage.cpp:92 msgid "Read-Only" msgstr "ਸਿਰਫ ਪੜਨ ਲਈ" #: cups/kptagspage.cpp:115 msgid "The tag name must not contain any spaces, tabs or quotes: %1." msgstr "" #: cups/kptextpage.cpp:41 msgid "" "

Characters Per Inch

This setting controls the " "horizontal size of characters when printing a text file.

The default " "value is 10, meaning that the font is scaled in a way that 10 characters " "per inch will be printed.


Additional hint for power " "users: This TDEPrint GUI element matches with the CUPS commandline job " "option parameter:

    -o cpi=...          # example: \"8\" or "
"\"12\"  

" msgstr "" #: cups/kptextpage.cpp:55 msgid "" "

Lines Per Inch

This setting controls the vertical " "size of characters when printing a text file.

The default value is " "6, meaning that the font is scaled in a way that 6 lines per inch will be " "printed.


Additional hint for power users: This " "TDEPrint GUI element matches with the CUPS commandline job option parameter:" "

    -o lpi=...         # example \"5\" or \"7\"  

" msgstr "" #: cups/kptextpage.cpp:69 msgid "" "

Columns

This setting controls how many columns of " "text will be printed on each page when. printing text files.

The " "default value is 1, meaning that only one column of text per page will be " "printed.


Additional hint for power users: This " "TDEPrint GUI element matches with the CUPS commandline job option parameter:" "

    -o columns=...     # example: \"2\" or \"4\"  

" msgstr "" #: cups/kptextpage.cpp:84 msgid " Preview icon changes when you turn on or off prettyprint. " msgstr "" #: cups/kptextpage.cpp:87 msgid "" "

Text Formats

These settings control the appearance " "of text on printouts. They are only valid for printing text files or input " "directly through kprinter.

Note: These settings have no " "effect whatsoever for other input formats than text, or for printing from " "applications such as the TDE Advanced Text Editor. (Applications in general " "send PostScript to the print system, and 'kate' in particular has its own " "knobs to control the print output.

.

Additional hint for " "power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter:

     -o cpi=...         # "
"example: \"8\" or \"12\"  
-o lpi=... # example: \"5\" or " "\"7\"
-o columns=... # example: \"2\" or \"4\"

" msgstr "" #: cups/kptextpage.cpp:108 msgid "" "

Margins

These settings control the margins of " "printouts on the paper. They are not valid for jobs originating from " "applications which define their own page layout internally and send " "PostScript to TDEPrint (such as KOffice, OpenOffice or LibreOffice).

" "

When printing from TDE applications, such as KMail and Konqueror, or " "printing an ASCII text file through kprinter, you can choose your preferred " "margin settings here.

Margins may be set individually for each edge " "of the paper. The combo box at the bottom lets you change the units of " "measurement between Pixels, Millimeters, Centimeters, and Inches.

" "

You can even use the mouse to grab one margin and drag it to the intended " "position (see the preview picture on the right side).


" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:

     -o "
"page-top=...      # example: \"72\"  
-o page-bottom=... # " "example: \"24\"
-o page-left=... # example: \"36\"
-" "o page-right=... # example: \"12\"

" msgstr "" #: cups/kptextpage.cpp:134 msgid "" "

Turn Text Printing with Syntax Highlighting (Prettyprint) On!

ASCII text file printouts can be 'prettyfied' by enabling this " "option. If you do so, a header is printed at the top of each page. The " "header contains the page number, job title (usually the filename), and the " "date. In addition, C and C++ keywords are highlighted, and comment lines " "are italicized.

This prettyprint option is handled by CUPS.

" "

If you prefer another 'plaintext-to-prettyprint' converter, look for the " "enscript pre-filter on the Filters tab.



" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:

     -o "
"prettyprint=true.  

" msgstr "" #: cups/kptextpage.cpp:153 msgid "" "

Turn Text Printing with Syntax Highlighting (Prettyprint) Off! " "

ASCII text file printing with this option turned off are " "appearing without a page header and without syntax highlighting. (You can " "still set the page margins, though.)



Additional " "hint for power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter:

    -o prettyprint=false   

" msgstr "" #: cups/kptextpage.cpp:167 msgid "" "

Print Text with Syntax Highlighting (Prettyprint)

" "

ASCII file printouts can be 'prettyfied' by enabling this option. If you " "do so, a header is printed at the top of each page. The header contains " "the page number, job title (usually the filename), and the date. In " "addition, C and C++ keywords are highlighted, and comment lines are " "italicized.

This prettyprint option is handled by CUPS.

If " "you prefer another 'plaintext-to-prettyprint' converter, look for the " "enscript pre-filter on the Filters tab.



" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:

     -o "
"prettyprint=true.  
-o prettyprint=false

" msgstr "" #: cups/kptextpage.cpp:188 msgid "Text" msgstr "ਪਾਠ" #: cups/kptextpage.cpp:191 msgid "Text Format" msgstr "ਪਾਠ ਫਾਰਮਿਟ" #: cups/kptextpage.cpp:193 msgid "Syntax Highlighting" msgstr "ਸੰਟੇਕਸ ਉਭਾਰੋ" #: cups/kptextpage.cpp:195 kpmarginpage.cpp:42 kpmarginpage.cpp:45 msgid "Margins" msgstr "ਹਾਸ਼ੀਆ" #: cups/kptextpage.cpp:200 msgid "&Chars per inch:" msgstr "" #: cups/kptextpage.cpp:204 msgid "&Lines per inch:" msgstr "" #: cups/kptextpage.cpp:208 msgid "C&olumns:" msgstr "ਕਾਲਮ(&o):" #: cups/kptextpage.cpp:216 msgid "&Disabled" msgstr "ਅਯੋਗ(&D)" #: cups/kptextpage.cpp:218 msgid "&Enabled" msgstr "ਯੋਗ(&E)" #: driver.cpp:379 kpgeneralpage.cpp:261 lpd/lpdtools.cpp:307 #: management/kmconfiggeneral.cpp:44 management/kmpropgeneral.cpp:54 #: management/kmwend.cpp:49 msgid "General" msgstr "ਸਧਾਰਨ" #: driver.cpp:387 foomatic2loader.cpp:268 msgid "Adjustments" msgstr "ਅਨੁਕੂਲ" #: driver.cpp:389 msgid "JCL" msgstr "JCL" #: driver.cpp:391 management/kmwlocal.cpp:60 msgid "Others" msgstr "ਹੋਰ" #: driverview.cpp:47 msgid "" " List of Driver Options (from PPD).

The upper pane of this " "dialog page contains all printjob options as laid down in the printer's " "description file (PostScript Printer Description == 'PPD')

Click on " "any item in the list and watch the lower pane of this dialog page display " "the available values.

Set the values as needed. Then use one of the " "pushbuttons below to proceed:

  • 'Save' your settings " "if you want to re-use them in your next job(s) too. 'Save' will " "store your settings permanently until you change them again.
  • . " "
  • Click 'OK' (without a prior click on 'Save', if you " "want to use your selected settings just once, for the next print job. " "'OK' will forget your current settings when kprinter is closed " "again, and will start next time with the previously saved defaults.
  • " "
  • 'Cancel' will not change anything. If you proceed to print " "after clicking 'Cancel', the job will print with the default " "settings of this queue.

Note. The number of available job " "options depends strongly on the actual driver used for your print queue. " "'Raw' queues do not have a driver or a PPD. For raw queues this " "tab page is not loaded by TDEPrint, and thus is not present in the kprinter " "dialog.

" msgstr "" #: driverview.cpp:71 msgid "" " List of Possible Values for given Option (from PPD).

The " "lower pane of this dialog page contains all possible values of the " "printoption highlighted above, as laid down in the printer's description " "file (PostScript Printer Description == 'PPD')

Select the value you " "want and proceed.

Then use one of the pushbuttons below to leave " "this dialog:

  • 'Save' your settings if you want to re-" "use them in your next job(s) too. 'Save' will store your settings " "permanently until you change them again.
  • .
  • Click 'OK' if " "you want to use your selected settings just once, for the next print job. " "'OK' will forget your current settings when kprinter is closed " "again, and will start next time with your previous defaults.
  • " "
  • 'Cancel' will not change anything. If you proceed to print " "after clicking 'Cancel', the job will print with the default " "settings of this queue.

Note. The number of available job " "options depends strongly on the actual driver used for your print queue. " "'Raw' queues do not have a driver or a PPD. For raw queues this " "tab page is not loaded by TDEPrint, and thus is not present in the kprinter " "dialog.

" msgstr "" #: droptionview.cpp:61 msgid "Value:" msgstr "ਮੁੱਲ:" #: droptionview.cpp:167 msgid "String value:" msgstr "" #: droptionview.cpp:306 droptionview.cpp:341 msgid "No Option Selected" msgstr "" #: ext/kextprinterimpl.cpp:47 msgid "Empty print command." msgstr "ਖਾਲੀ ਪਰਿੰਟ ਕਮਾਂਡ।" #: ext/kmextmanager.cpp:41 msgid "PS_printer" msgstr "PS_ਪਰਿੰਟਰ" #: ext/kmextmanager.cpp:43 msgid "PostScript file generator" msgstr "ਪੋਸਟਸਕਰਿਪਟ ਫਾਇਲ ਨਿਰਮਾਤਾ" #: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72 msgid "" "No valid print executable was found in your path. Check your installation." msgstr "" #: foomatic/kmfoomaticmanager.cpp:70 msgid "This is not a Foomatic printer" msgstr "" #: foomatic/kmfoomaticmanager.cpp:75 msgid "Some printer information are missing" msgstr "" #: kmfactory.cpp:221 msgid "There was an error loading %1. The diagnostic is:

%2

" msgstr "" #: kmjob.cpp:114 msgid "Queued" msgstr "ਕਤਾਰ ਵਿੱਚ" #: kmjob.cpp:117 msgid "Held" msgstr "ਫੜਿਆ" #: kmjob.cpp:123 msgid "Canceled" msgstr "ਰੱਦ ਕੀਤਾ" #: kmjob.cpp:126 msgid "Aborted" msgstr "ਅਧੂਰਾ ਛੱਡਿਆ" #: kmjob.cpp:129 msgid "Completed" msgstr "ਮੁਕੰਮਲ" #: kmmanager.cpp:70 msgid "This operation is not implemented." msgstr "" #: kmmanager.cpp:169 msgid "Unable to locate test page." msgstr "" #: kmmanager.cpp:450 msgid "Can't overwrite regular printer with special printer settings." msgstr "" #: kmmanager.cpp:479 #, c-format msgid "Parallel Port #%1" msgstr "" #: kmmanager.cpp:487 kmmanager.cpp:503 kxmlcommand.cpp:661 #, c-format msgid "Unable to load TDE print management library: %1" msgstr "" #: kmmanager.cpp:492 kxmlcommand.cpp:669 msgid "Unable to find wizard object in management library." msgstr "" #: kmmanager.cpp:508 msgid "Unable to find options dialog in management library." msgstr "" #: kmmanager.cpp:535 msgid "No plugin information available" msgstr "ਕੋਈ ਪਲੱਗਇਨ ਜਾਣਕਾਰੀ ਉਪਲੱਬਧ ਨਹੀਂ" #: kmprinter.cpp:144 msgid "(rejecting jobs)" msgstr "" #: kmprinter.cpp:144 msgid "(accepting jobs)" msgstr "" #: kmprinter.cpp:197 kprintdialog.cpp:983 msgid "All Files" msgstr "ਸਭ ਫਾਇਲਾਂ" #: kmspecialmanager.cpp:53 msgid "" "A file share/tdeprint/specials.desktop was found in your local TDE " "directory. This file probably comes from a previous TDE release and should " "be removed in order to manage global pseudo printers." msgstr "" #: kmuimanager.cpp:158 #, c-format msgid "Configuration of %1" msgstr "" #: kmvirtualmanager.cpp:161 msgid "" "You are about to set a pseudo-printer as your personal default. This " "setting is specific to TDE and will not be available outside TDE " "applications. Note that this will only make your personal default printer as " "undefined for non-TDE applications and should not prevent you from printing " "normally. Do you really want to set %1 as your personal default?" msgstr "" #: kmvirtualmanager.cpp:166 management/kminstancepage.cpp:91 msgid "Set as Default" msgstr "ਮੂਲ ਨਿਰਧਾਰਿਤ ਕਰੋ" #: kpcopiespage.cpp:46 msgid "" "

Page Selection

Here you can control if you print a " "certain selection only out of all the pages from the complete document.

" "
" msgstr "" #: kpcopiespage.cpp:51 msgid "" " All Pages: Select \"All\" to print the complete document. Since " "this is the default, it is pre-selected.

" msgstr "" #: kpcopiespage.cpp:55 msgid "" " Current Page: Select \"Current\" if you want to print " "the page currently visible in your TDE application.

Note: this " "field is disabled if you print from non-TDE applications like Firefox, " "PaleMoon, SeaMonkey or OpenOffice and LibreOffice, since here TDEPrint has " "no means to determine which document page you are currently viewing.

" msgstr "" #: kpcopiespage.cpp:61 msgid "" " Page Range: Choose a \"Page Range\" to select a subset of the " "complete document pages to be printed. The format is \"n,m,o-p,q,r,s-t, u" "\".

Example: \"4,6,10-13,17,20,23-25\" will " "print the pages 4, 6, 10, 11, 12, 13, 17, 20, 23, 24, 25 of your document.


Additional hint for power users: This TDEPrint " "GUI element matches with the CUPS commandline job option parameter: " "

    -o page-ranges=...     # example: \"4,6,10-13,17,20,23-25\"  
" "

" msgstr "" #: kpcopiespage.cpp:75 msgid "" " Page Set:

Choose \"All Pages\", \"Even Pages\" or \"Odd Pages\" if you want to print a page selection matching " "one of these terms. The default is \"All Pages\".

Note: If you combine a selection of a \"Page Range\" with a \"Page " "Set\" of \"Odd\" or \"Even\", you will only get the " "odd or even pages from the originally selected page range. This is useful if " "you odd or even pages from the originally selected page range. This is " "useful if you want to print a page range in duplex on a simplex-only " "printer. In this case you can feed the paper to the printer twice; in the " "first pass, select \"Odd\" or \"Even\" (depending on your printer model), in " "second pass select the other option. You may need to \"Reverse\" " "the output in one of the passes (depending on your printer model).

" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

    -o page-set=...        # example: \"odd\" or \"even\"  

" "
" msgstr "" #: kpcopiespage.cpp:98 msgid "" " Output Settings: Here you can determine the number of copies, " "the output order and the collate mode for the pages of your printjob. (Note, " "that the maximum number of copies allowed to print may be restricted by " "your print subsystem.)

The 'Copies' setting defaults to 1.

" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

     -o copies=...            # examples: \"5\" or \"42\"  
-o " "outputorder=... # example: \"reverse\"
-o " "Collate=... # example: \"true\" or \"false\"

.
" msgstr "" #: kpcopiespage.cpp:116 msgid "" " Number of Copies: Determine the number of requested copies here. " "You can increase or decrease the number of printed copies by clicking on the " "up and down arrows. You can also type the figure directly into the box.

" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

     -o copies=...            # examples: \"5\" or \"42\"  

" "
" msgstr "" #: kpcopiespage.cpp:129 msgid "" " Collate Copies

If the \"Collate\" checkbox is " "enabled (default), the output order for multiple copies of a multi-page " "document will be \"1-2-3-..., 1-2-3-..., 1-2-3-...\".

If the " "\"Collate\" checkbox is disabled, the output order for multiple copies " "of a multi-page document will be \"1-1-1-..., 2-2-2-..., 3-3-3-...\".

" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

    -o Collate=...           # example:  \"true\" or \"false\"  
" "

" msgstr "" #: kpcopiespage.cpp:143 msgid "" " Reverse Order

If the \"Reverse\" checkbox is " "enabled, the output order for multiple copies of a multi-page document will " "be \"...-3-2-1, ...-3-2-1, ...-3-2-1\", if you also have enabled " "the \"Collate\" checkbox at the same time (the usual usecase).

" "

If the \"Reverse\" checkbox is enabled, the output order for " "multiple copies of a multi-page document will be " "\"...-3-3-3, ...-2-2-2, ...-1-1-1\", if you have disabled the " "\"Collate\" checkbox at the same time.



" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:

    -o "
"outputorder=...       # example:  \"reverse\"  

" msgstr "" #: kpcopiespage.cpp:164 msgid "C&opies" msgstr "ਨਕਲਾਂ(&o)" #: kpcopiespage.cpp:168 msgid "Page Selection" msgstr "ਸਫ਼ਾ ਚੋਣ" #: kpcopiespage.cpp:170 msgid "&All" msgstr "ਸਭ(&A)" #: kpcopiespage.cpp:172 msgid "Cu&rrent" msgstr "" #: kpcopiespage.cpp:174 msgid "Ran&ge" msgstr "ਸੀਮਾ(&g)" #: kpcopiespage.cpp:179 msgid "" "

Enter pages or group of pages to print separated by commas (1,2-5,8).

" msgstr "" #: kpcopiespage.cpp:183 msgid "Output Settings" msgstr "ਆਉਟਪੁੱਟ ਸੈਟਿੰਗ" #: kpcopiespage.cpp:185 msgid "Co&llate" msgstr "" #: kpcopiespage.cpp:187 msgid "Re&verse" msgstr "ਉਲਟ(&v)" #: kpcopiespage.cpp:192 msgid "Cop&ies:" msgstr "ਨਕਲਾਂ(&i):" #: kpcopiespage.cpp:199 msgid "All Pages" msgstr "ਸਭ ਸਫ਼ੇ" #: kpcopiespage.cpp:200 msgid "Odd Pages" msgstr "ਟਾਂਕ ਸਫ਼ੇ" #: kpcopiespage.cpp:201 msgid "Even Pages" msgstr "ਜਿਸਤ ਸਫ਼ੇ" #: kpcopiespage.cpp:203 msgid "Page &set:" msgstr "ਸਫ਼ਾ ਸੈੱਟ(&s):" #: kpcopiespage.cpp:258 msgid "Pages" msgstr "ਸਫੇ" #: kpdriverpage.cpp:30 management/kmpropdriver.cpp:54 msgid "Driver Settings" msgstr "ਡਰਾਇਵਰ ਸੈਟਿੰਗ" #: kpdriverpage.cpp:48 msgid "" "Some options selected are in conflict. You must resolve these conflicts " "before continuing. See Driver Settings tab for detailed information." msgstr "" #: kpfileselectpage.cpp:33 msgid "&Files" msgstr "ਫਾਇਲਾਂ(&F)" #: kpfilterpage.cpp:42 msgid "" " Add Filter button

This button calls a little dialog to let " "you select a filter here.

Note 1: You can chain different " "filters as long as you make sure that the output of one fits as input of " "the next. (TDEPrint checks your filtering chain and will warn you if you " "fail to do so.

Note 2: The filters you define here are " "applied to your jobfile before it is handed downstream to " "your spooler and print subsystem (e.g. CUPS, LPRng, LPD).

" msgstr "" #: kpfilterpage.cpp:54 msgid "" " Remove Filter button

This button removes the highlighted " "filter from the list of filters. " msgstr "" #: kpfilterpage.cpp:59 msgid "" " Move Filter Up button

This button moves the highlighted " "filter up in the list of filters, towards the front of the filtering chain. " "

" msgstr "" #: kpfilterpage.cpp:64 msgid "" " Move Filter Down button

This button moves the highlighted " "filter down in the list of filters, towards the end of the filtering chain.." "

" msgstr "" #: kpfilterpage.cpp:69 msgid "" " Configure Filter button

This button lets you configure the " "currently highlighted filter. It opens a separate dialog.

" msgstr "" #: kpfilterpage.cpp:75 msgid "" " Filter Info Pane

This field shows some general info about " "the selected filter. Amongst them are:

  • the filter name " "(as displayed in the TDEPrint user interface);
  • the filter " "requirements (that is the external program that needs to present and " "executable on this system);
  • the filter input format (in " "the form of one or several MIME types accepted by the filter);
  • the filter output format (in the form of a MIME type generated by the filter);
  • a more or less verbose text " "describing the filter's operation.

" msgstr "" #: kpfilterpage.cpp:91 msgid "" " Filtering Chain (if enabled, is run before actual job " "submission to print system)

This field shows which filters are currently " "selected to act as 'pre-filters' for TDEPrint. Pre-filters are processing " "the print files before they are send downstream to your real print " "subsystem.

The list shown in this field may be empty (default).

The pre-filters act on the printjob in the order they are listed " "(from top to bottom). This is done by acting as a filtering chain " "where the output of one filter acts as input to the next. By putting the " "filters into the wrong order, you can make the filtering chain fail. For " "example: if your file is ASCII text, and you want the output being " "processed by the 'Multipage per Sheet' filter, the first filter must be one " "that processes ASCII into PostScript.

TDEPrint can utilize any external filtering program which you may find useful through this " "interface.

TDEPrint ships preconfigured with support for a " "selection of common filters. These filters however need to be installed " "independently from TDEPrint. These pre-filters work for all print " "subsystems supported by TDEPrint (such as CUPS, LPRng and LPD), because they " "are not depending on these.

.

Amongst the pre-configured filters " "shipping with TDEPrint are:

  • the Enscript text filter
  • a Multiple Pages per Sheet filter
  • a " "PostScript to PDF converter.
  • a Page Selection/" "Ordering filter.
  • a Poster Printing filter.
  • " "
  • and some more..
To insert a filter into this list, simply " "click on the funnel icon (topmost on the right icon column group) " "and proceed.

Please click on the other elements of this dialog to " "learn more about the TDEPrint pre-filters.

" msgstr "" #: kpfilterpage.cpp:125 msgid "Filters" msgstr "ਫਿਲਟਰ" #: kpfilterpage.cpp:141 msgid "Add filter" msgstr "ਫਿਲਟਰ ਜੋੜੋ" #: kpfilterpage.cpp:146 msgid "Remove filter" msgstr "ਫਿਲਟਰ ਹਟਾਓ" #: kpfilterpage.cpp:151 msgid "Move filter up" msgstr "ਫਿਲਟਰ ਓਪਰ ਭੇਜੋ" #: kpfilterpage.cpp:156 msgid "Move filter down" msgstr "ਫਿਲਟਰ ਹੇਠਾਂ ਭੇਜੋ" #: kpfilterpage.cpp:161 msgid "Configure filter" msgstr "ਸੰਰਚਨਾ ਫਿਲਟਰ" #: kpfilterpage.cpp:279 msgid "Internal error: unable to load filter." msgstr "ਅੰਦਰੂਨੀ ਗਲਤੀ: ਫਿਲਟਰ ਲੋਡ ਕਰਨ ਵਿੱਚ ਅਸਫਲ਼ ਹੈ।" #: kpfilterpage.cpp:394 msgid "" "

The filter chain is wrong. The output format of at least one filter is " "not supported by its follower. See Filters tab for more information." msgstr "" #: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840 msgid "Requirements" msgstr "ਲੋੜ" #: kpfilterpage.cpp:408 msgid "Input" msgstr "ਇੰਪੁੱਟ" #: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217 msgid "Output" msgstr "ਆਉਟਪੁੱਟ" #: kpgeneralpage.cpp:86 msgid "ISO A4" msgstr "ISO A4" #: kpgeneralpage.cpp:87 lpd/lpdtools.cpp:30 util.h:72 msgid "US Letter" msgstr "US ਪੱਤਰ" #: kpgeneralpage.cpp:88 lpd/lpdtools.cpp:29 util.h:71 msgid "US Legal" msgstr "US ਲੀਗਲ" #: kpgeneralpage.cpp:89 lpd/lpdtools.cpp:28 util.h:69 msgid "Ledger" msgstr "ਲੈਡਰ" #: kpgeneralpage.cpp:90 util.h:68 msgid "Folio" msgstr "Folio" #: kpgeneralpage.cpp:91 msgid "US #10 Envelope" msgstr "US #10 ਲਿਫਾਫਾ" #: kpgeneralpage.cpp:92 msgid "ISO DL Envelope" msgstr "ISO DL ਲਿਫਾਫਾ" #: kpgeneralpage.cpp:93 util.h:70 msgid "Tabloid" msgstr "ਸਮਾਚਾਰ ਪੱਤਰ" #: kpgeneralpage.cpp:94 msgid "ISO A3" msgstr "ISO A3" #: kpgeneralpage.cpp:95 msgid "ISO A2" msgstr "ISO A2" #: kpgeneralpage.cpp:96 msgid "ISO A1" msgstr "ISO A1" #: kpgeneralpage.cpp:97 msgid "ISO A0" msgstr "ISO A0" #: kpgeneralpage.cpp:107 msgid "Upper Tray" msgstr "ਉੱਪਰਲੀ ਟਰੇ" #: kpgeneralpage.cpp:108 msgid "Lower Tray" msgstr "ਹੇਠਲੀ ਟਰੇ" #: kpgeneralpage.cpp:109 msgid "Multi-Purpose Tray" msgstr "" #: kpgeneralpage.cpp:110 msgid "Large Capacity Tray" msgstr "ਵੱਡੀ ਟਰੇ" #: kpgeneralpage.cpp:114 msgid "Normal" msgstr "ਸਧਾਰਨ" #: kpgeneralpage.cpp:115 msgid "Transparency" msgstr "ਪਾਰਦਰਸ਼ੀ" #: kpgeneralpage.cpp:124 msgid "" "

\"General\"

This dialog page contains general print job settings. General settings are applicable to most printers, " "most jobs and most job file types.

To get more specific help, enable " "the \"WhatsThis\" cursor and click on any of the text labels or GUI " "elements of this dialog. " msgstr "" #: kpgeneralpage.cpp:132 msgid "" "

Page size: Select paper size to be printed on from the " "drop-down menu.

The exact list of choices depends on the printer " "driver (\"PPD\") you have installed.



Additional " "hint for power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter:

    -o PageSize=...         # "
"examples: \"A4\" or \"Letter\"  

" msgstr "" #: kpgeneralpage.cpp:145 msgid "" "

Paper type: Select paper type to be printed on from the " "drop-down menu.

The exact list of choices depends on the printer " "driver (\"PPD\") you have installed.



Additional " "hint for power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter:

    -o MediaType=...        # "
"example: \"Transparency\"  

" msgstr "" #: kpgeneralpage.cpp:158 msgid "" "

Paper source: Select paper source tray for the paper to be " "printed on from the drop-down menu.

The exact list of choices depends on " "the printer driver (\"PPD\") you have installed.



" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:

    -o "
"InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  
" msgstr "" #: kpgeneralpage.cpp:171 msgid "" "

Image Orientation: Orientation of the printed page image " "on your paper is controlled by the radio buttons. By default, the " "orientation is Portrait

You can select 4 alternatives:

    " "
  • Portrait..Portrait is the default setting.
  • " "Landscape.
  • Reverse Landscape. Reverse Landscape " "prints the images upside down.
  • Reverse Portrait. Reverse " "Portrait prints the image upside down.
The icon changes " "according to your selection.



Additional hint for " "power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter:

    -o orientation-"
"requested=...       # examples: \"landscape\" or \"reverse-portrait\"   

" msgstr "" #: kpgeneralpage.cpp:192 msgid "" "

Duplex Printing: These controls may be grayed out if your " "printer does not support duplex printing (i.e. printing on both " "sides of the sheet). These controls are active if your printer supports " "duplex printing.

You can choose from 3 alternatives:

  • " "None. This prints each page of the job on one side of the sheets " "only.
  • Long Side. This prints the job on both sides of the " "paper sheets. It prints the job in a way so that the backside has the same " "orientation as the front side if you turn the paper over the long edge. " "(Some printer drivers name this mode duplex-non-tumbled).
  • " "
  • Short Side. This prints the job on both sides of the paper " "sheets. It prints the job so that the backside has the reverse orientation " "from the front side if you turn the paper over the long edge, but the same " "orientation, if you turn it over the short edge. (Some printer drivers name " "this mode duplex-tumbled).

" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:

    -o "
"duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\"  
" "

" msgstr "" #: kpgeneralpage.cpp:218 msgid "" "

Banner Page(s): Select banner(s) to print one or two " "special sheets of paper just before or after your main job.

Banners " "may contain some pieces of job information, such as user name, time of " "printing, job title and more.

Banner pages are useful to separate " "different jobs more easily, especially in a multi-user environment.

" "

Hint: You can design your own banner pages. To make use " "of them, just put the banner file into the standard CUPS banners " "directory (This is usually \"/usr/share/cups/banner/\" Your custom " "banner(s) must have one of the supported printable formats. Supported " "formats are ASCII text, PostScript, PDF and nearly any image format such as " "PNG, JPEG or GIF. Your added banner pages will appear in the drop down menu " "after a restart of CUPS.

CUPS comes with a selection of banner " "pages.



Additional hint for power users: This " "TDEPrint GUI element matches with the CUPS commandline job option parameter:" "

    -o job-sheets=...       # examples: \"standard\" or "
"\"topsecret\"  

" msgstr "" #: kpgeneralpage.cpp:240 msgid "" "

Pages per Sheet: You can choose to print more than one " "page onto each sheet of paper. This is sometimes useful to save paper.

" "

Note 1: the page images get scaled down accordingly to print 2 or " "4 pages per sheet. The page image does not get scaled if you print 1 page " "per sheet (the default setting.).

Note 2: If you select multiple " "pages per sheet here, the scaling and re-arranging is done by your printing " "system. Be aware, that some printers can by themselves print multiple pages " "per sheet. In this case you find the option in the printer driver settings. " "Be careful: if you enable multiple pages per sheet in both places, your " "printout will not look as you intended.



" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:

    -o "
"number-up=...        # examples: \"2\" or \"4\"  

" msgstr "" #: kpgeneralpage.cpp:264 kpqtpage.cpp:118 msgid "Page s&ize:" msgstr "" #: kpgeneralpage.cpp:268 msgid "Paper t&ype:" msgstr "" #: kpgeneralpage.cpp:272 msgid "Paper so&urce:" msgstr "" #: kpgeneralpage.cpp:292 msgid "Duplex Printing" msgstr "" #: kpgeneralpage.cpp:295 kpqtpage.cpp:143 msgid "Pages per Sheet" msgstr "ਸਫ਼ੇ ਪ੍ਰਤੀ ਸ਼ੀਟ" #: kpgeneralpage.cpp:301 kpqtpage.cpp:125 msgid "&Portrait" msgstr "ਪੋਰਟਰੇਟ(&P)" #: kpgeneralpage.cpp:302 kpqtpage.cpp:128 msgid "&Landscape" msgstr "ਭੂ-ਦਰਿਸ਼(&L)" #: kpgeneralpage.cpp:303 msgid "&Reverse landscape" msgstr "ਉਲਟ ਲੈਡਸਕੇਪ(&R)" #: kpgeneralpage.cpp:304 msgid "R&everse portrait" msgstr "ਉਲਟ ਪੋਰਟਰੇਟ(&e)" #: kpgeneralpage.cpp:309 msgid "" "_: duplex orientation\n" "&None" msgstr "" #: kpgeneralpage.cpp:310 msgid "" "_: duplex orientation\n" "Lon&g side" msgstr "" #: kpgeneralpage.cpp:311 msgid "" "_: duplex orientation\n" "S&hort side" msgstr "" #: kpgeneralpage.cpp:323 msgid "S&tart:" msgstr "" #: kpgeneralpage.cpp:324 msgid "En&d:" msgstr "" #: kpgeneralpage.cpp:416 lpd/lpdtools.cpp:40 management/kmconfiggeneral.cpp:52 msgid "Disabled" msgstr "ਆਯੋਗ" #: kpgeneralpage.cpp:417 lpd/lpdtools.cpp:39 lpr/editentrydialog.cpp:50 msgid "Enabled" msgstr "ਯੋਗ" #: kpposterpage.cpp:42 msgid " 5. " msgstr " 5. " #: kpposterpage.cpp:46 msgid "" " Print Poster (enabled or disabled).

If you enable this " "option, you can print posters of different sizes The printout will happen " "in the form 'tiles' printed on smaller paper sizes, which you can " "stitch together later. If you enable this option here, the 'Poster " "Printing' filter will be auto-loaded in the 'Filters' tab of this " "dialog.

This tab is only visible if the external 'poster' " "utility is discovered by TDEPrint on your system. ['poster' is a " "commandline utility that enables you to convert PostScript files into tiled " "printouts which allow for oversized appearance of the stitched-together " "tiles.]

Note: The standard version of 'poster' will not work. " "Your system must use a patched version of 'poster'. Ask your operating " "system vendor to provide a patched version of 'poster' if he does not " "already.

" msgstr "" #: kpposterpage.cpp:62 msgid "" " Tile Selection widget

This GUI element is not only for " "viewing your selections: it also lets you interactively select the " "tile(s) you want to print.

Hints

  • Click any tile " "to select it for printing.
  • To select multiple tiles to be printed " "at once, 'shift-click' on the tiles ('shift-click' means: hold down " "the [SHIFT]-key on your keyboard and click with the mouse while [SHIFT]-key " "is held.) Be aware that the order of your clicking is also " "significant to the order of printing the different tiles.
" "Note 1: The order of your selection (and the order for printout of " "the tiles) is indicated by the contents of the text field below, labelled " "as 'Tile pages (to be printed):'

Note 2: By default no " "tile is selected. Before you can print (a part of) your poster, you must " "select at least one tile.

" msgstr "" #: kpposterpage.cpp:83 msgid "" " Poster Size

Select the poster size you want from the " "dropdown list.

Available sizes are all standard paper sizes up to " "'A0'. [A0 is the same size as 16 sheets of A4, or '84cm x 118.2cm'.]

" "

Notice, how the little preview window below changes with your " "change of poster size. It indicates to you how many tiles need to be " "printed to make the poster, given the selected paper size.

Hint:" " The little preview window below is not just a passive icon. You can " "click on its individual tiles to select them for printing. To select " "multiple tiles to be printed at once, you need to 'shift-click' on " "the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " "and click with the mouse while [SHIFT]-key is held.) The order of your " "clicking is significant to the order of printing the different tiles. The " "order of your selection (and for the printed tiles) is indicated by the " "contents of the text field labelled as 'Tile pages (to be printed):'

Note: By default no tile is selected. Before you can print (a " "part of) your poster, you must select at least one tile.

" msgstr "" #: kpposterpage.cpp:102 msgid "" " Paper Size

This field indicates the paper size the poster " "tiles will be printed on. To select a different paper size for your poster " "tiles, go to the 'General' tab of this dialog and select one from the " "dropdown list.

Available sizes are most standard paper sizes supported " "by your printer. Your printer's supported paper sizes are read from the " "printer driver info (as laid down in the 'PPD', the printer " "description file). Be aware that the 'Paper Size' selected may not be " "supported by 'poster' (example: 'HalfLetter') while it may well be " "supported by your printer. If you hit that obstacle, simply use " "another, supported Paper Size, like 'A4' or 'Letter'.

Notice, how " "the little preview window below changes with your change of paper size. It " "indicates how many tiles need to be printed to make up the poster, given " "the selected paper and poster size.

Hint: The little preview " "window below is not just a passive icon. You can click on its individual " "tiles to select them for printing. To select multiple tiles to be printed " "at once, you need to 'shift-click' on the tiles ('shift-click' " "means: hold down the [SHIFT]-key on your keyboard and click with the mouse " "while [SHIFT]-key is held.) The order of your clicking is significant to " "the order of printing the different tiles. The order of your selection (and " "for the printed tiles) is indicated by the contents of the text field " "labelled as 'Tile pages (to be printed):'

Note: By " "default no tile is selected. Before you can print (a part of) your poster, " "you must select at least one tile.

" msgstr "" #: kpposterpage.cpp:126 msgid "" " Cut Margin selection

Slider and spinbox let you determine " "a 'cut margin' which will be printed onto each tile of your poster " "to help you cut the pieces as needed.

Notice, how the little " "preview window above changes with your change of cut margins. It indicates " "to you how much space the cut margins will take away from each tile. " "

Be aware, that your cut margins need to be equal to or greater " "than the margins your printer uses. The printer's capabilities are " "described in the 'ImageableArea' keywords of its driver PPD file. " "

" msgstr "" #: kpposterpage.cpp:137 msgid "" " Order and number of tile pages to be printed

This field " "displays and sets the individual tiles to be printed, as well as the order " "for their printout.

You can file the field with 2 different methods: " "
  • Either use the interactive thumbnail preview above and '[SHIFT]-" "click' on the tiles.
  • Or edit this text field accordingly.
  • " "

When editing the field, you can use a '3-7' syntax instead of a " "'3,4,5,6,7' one.

Examples:

    \"2,3,7,9,3\"  "
"
\"1-3,6,8-11\" " msgstr "" #: kpposterpage.cpp:154 msgid "Poster" msgstr "ਪੋਸਟਰ" #: kpposterpage.cpp:156 msgid "&Print poster" msgstr "" #: kpposterpage.cpp:170 msgid "Poste&r size:" msgstr "" #: kpposterpage.cpp:172 msgid "Media size:" msgstr "" #: kpposterpage.cpp:174 msgid "Pri&nt size:" msgstr "ਪਰਿੰਟ ਆਕਾਰ(&n):" #: kpposterpage.cpp:181 #, no-c-format msgid "C&ut margin (% of media):" msgstr "" #: kpposterpage.cpp:185 msgid "&Tile pages (to be printed):" msgstr "" #: kpposterpage.cpp:192 msgid "Link/unlink poster and print size" msgstr "" #: kpposterpage.cpp:257 msgid "Unknown" msgstr "ਅਣਜਾਣ" #: kpqtpage.cpp:70 msgid "" " Selection of color mode: You can choose between 2 options: " "
  • Color and
  • Grayscale
Note: " "This selection field may be grayed out and made inactive. This happens if " "TDEPrint can not retrieve enough information about your print file. In this " "case the embedded color- or grayscale information of your printfile, and " "the default handling of the printer take precedence.
" msgstr "" #: kpqtpage.cpp:79 msgid "" " Selection of page size: Select paper size to be printed on " "from the drop-down menu.

The exact list of choices depends on the " "printer driver (\"PPD\") you have installed. " msgstr "" #: kpqtpage.cpp:84 msgid "" " Selection of pages per sheet: You can choose to print more " "than one page onto each sheet of paper. This is sometimes useful to save " "paper.

Note 1: the page images get scaled down accordingly to " "print 2 or 4 pages per sheet. The page image does not get scaled if you " "print 1 page per sheet (the default setting.).

Note 2: If you " "select multiple pages per sheet here, the scaling and re-arranging is done " "by your printing system.

Note 3, regarding \"Other\": You cannot " "really select Other as the number of pages to print on one sheet." "\"Other\" is checkmarked here for information purposes only.

To select " "8, 9, 16 or other numbers of pages per sheet:

  • go to the tab " "headlined \"Filter\"
  • enable the Multiple Pages per Sheet " "filter
  • and configure it (bottom-most button on the right of the " "\"Filters\" tab).
" msgstr "" #: kpqtpage.cpp:102 msgid "" " Selection of image orientation: Orientation of the printed " "pageimage on your paper is controlled by the radio buttons. By default, the " "orientation is Portrait

You can select 2 alternatives:

    " "
  • Portrait..Portrait is the default setting.
  • " "Landscape.
The icon changes according to your " "selection.
" msgstr "" #: kpqtpage.cpp:113 msgid "Print Format" msgstr "ਛਪਾਈ ਫਾਰਮਿਟ" #: kpqtpage.cpp:123 msgid "Color Mode" msgstr "ਰੰਗ ਢੰਗ" #: kpqtpage.cpp:135 msgid "Colo&r" msgstr "ਰੰਗ(&r)" #: kpqtpage.cpp:138 msgid "&Grayscale" msgstr "ਸਲੇਟੀ(&G)" #: kpqtpage.cpp:151 msgid "Ot&her" msgstr "ਹੋਰ(&h)" #: kprintaction.cpp:117 kprintaction.cpp:122 kprintaction.cpp:127 msgid "&Export..." msgstr "ਨਿਰਯਾਤ(&E)..." #: kprintdialog.cpp:97 msgid "" " Printer Location: The Location may describe where the " "selected printer is located. The Location description is created by the " "administrator of the print system (or may be left empty). " msgstr "" #: kprintdialog.cpp:102 msgid "" " Printer Type: The Type indicates your printer type. " msgstr "" #: kprintdialog.cpp:104 msgid "" " Printer State: The State indicates the state of the " "print queue on the print server (which could be your localhost). The state " "may be 'Idle', 'Processing', 'Stopped', 'Paused' or similar. " msgstr "" #: kprintdialog.cpp:108 msgid "" " Printer Comment: The Comment may describe the selected " "printer. This comment is created by the administrator of the print system " "(or may be left empty). " msgstr "" #: kprintdialog.cpp:112 msgid "" " Printer Selection Menu:

Use this combo box to select the " "printer to which you want to print. Initially (if you run TDEPrint for the " "first time), you may only find the TDE special printers (which " "save jobs to disk [as PostScript- or PDF-files], or deliver jobs via email " "(as a PDF attachment). If you are missing a real printer, you need to... " "

  • ...either create a local printer with the help of the TDE Add " "Printer Wizard. The Wizard is available for the CUPS and RLPR printing " "systems (click button to the left of the 'Properties' button),
  • " "
  • ...or try to connect to an existing remote CUPS print server. You can " "connect by clicking the 'System Options' button below. A new dialog " "opens: click on the 'CUPS server' icon: Fill in the information " "required to use the remote server.

Note: It may " "happen that you successfully connected to a remote CUPS server and still do " "not get a printer list. If this happens: force TDEPrint to re-load its " "configuration files. To reload the configuration files, either start " "kprinter again, or use the switch the print system away from CUPS and back " "again once. The print system switch can be made through a selection in the " "drop-down menu at bottom of this dialog when fully expanded).

" msgstr "" #: kprintdialog.cpp:137 msgid "" " Print Job Properties:

This button opens a dialog where you " "can make decisions regarding all supported print job options. " msgstr "" #: kprintdialog.cpp:141 msgid "" " Selective View on List of Printers:

This button reduces the " "list of visible printers to a shorter, more convenient, pre-defined list.

This is particularly useful in enterprise environments with lots of " "printers. The default is to show all printers.

To create a " "personal 'selective view list', click on the 'System Options' button at the bottom of this dialog. Then, in the new dialog, select " "'Filter' (left column in the TDE Print Configuration " "dialog) and setup your selection..

Warning: Clicking this " "button without prior creation of a personal 'selective view list' " "will make all printers dissappear from the view. (To re-enable all " "printers, just click this button again.)

" msgstr "" #: kprintdialog.cpp:154 msgid "" "TDE Add Printer Wizard

This button starts the TDE Add " "Printer Wizard.

Use the Wizard (with \"CUPS\" or " "\"RLPR\") to add locally defined printers to your system.

" "

Note: The TDE Add Printer Wizard does not work, " "and this button is disabled if you use \"Generic LPD\", \"LPRng" "\", or \"Print Through an External Program\".)

" msgstr "" #: kprintdialog.cpp:163 msgid "" " External Print Command

Here you can enter any command that " "would also print for you in a konsole window.

Example: " "
a2ps -P <printername> --medium=A3
.
" msgstr "" #: kprintdialog.cpp:168 msgid "" " Additional Print Job Options

This button shows or hides " "additional printing options." msgstr "" #: kprintdialog.cpp:170 msgid "" " System Options:

This button starts a new dialog where you " "can adjust various settings of your printing system. Amongst them:

  • " "Should \tDE applications embed all fonts into the PostScript they generate " "for printing?
  • Should TDE use an external PostScript viewer like gv for print page previews?
  • Should TDEPrint use a local or a remote " "CUPS server?,
and many more....
" msgstr "" #: kprintdialog.cpp:182 msgid "" " Help: This button takes you to the complete TDEPrint Manual. " msgstr "" #: kprintdialog.cpp:186 msgid "" " Cancel: This button cancels your print job and quits the " "kprinter dialog. " msgstr "" #: kprintdialog.cpp:190 msgid "" " Print: This button sends the job to the printing process. If you " "are sending non-PostScript files, you may be asked if you want TDE to " "convert the files into PostScript, or if you want your print subsystem (like " "CUPS) to do this. " msgstr "" #: kprintdialog.cpp:196 msgid "" " Keep Printing Dialog Open

If you enable this checkbox, the " "printing dialog stays open after you hit the Print button.

" "This is especially useful, if you need to test various print settings (like " "color matching for an inkjet printer) or if you want to send your job to " "multiple printers (one after the other) to have it finished more quickly. " msgstr "" #: kprintdialog.cpp:206 msgid "" " Output File Name and Path: The \"Output file:\" shows you where " "your file will be saved if you decide to \"Print to File\" your job, using " "one of the TDE Special Printers named \"Print to File " "(PostScript)\" or \"Print to File (PDF)\". Choose a name and location that " "suits your need by using the button and/or editing the line on the right. " msgstr "" #: kprintdialog.cpp:214 msgid "" " Output File Name and Path: Edit this line to create a path and " "filename that suits your needs. (Button and Lineedit field are only " "available if you \"Print to File\") " msgstr "" #: kprintdialog.cpp:219 msgid "" " Browse Directories button: This button calls the \"File Open / " "Browsed Directories\" dialog to let you choose a directory and file name " "where your \"Print-to-File\" job should be saved. " msgstr "" #: kprintdialog.cpp:225 msgid "" " Add File to Job

This button calls the \"File Open / Browse " "Directories\" dialog to allow you to select a file for printing. Note, that " "

  • you can select ASCII or International Text, PDF, PostScript, JPEG, " "TIFF, PNG, GIF and many other graphical formats.
  • you can select various " "files from different paths and send them as one \"multi-file job\" to the " "printing system.
" msgstr "" #: kprintdialog.cpp:237 msgid "" " Print Preview Enable this checkbox if you want to see a preview " "of your printout. A preview lets you check if, for instance, your intended " "\"poster\" or \"pamphlet\" layout looks like you expected, without wasting " "paper first. It also lets you cancel the job if something looks wrong. " "

Note: The preview feature (and therefore this checkbox) is only " "visible for printjobs created from inside TDE applications. If you start " "kprinter from the commandline, or if you use kprinter as a print command " "for non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), " "print preview is not available here. " msgstr "" #: kprintdialog.cpp:250 msgid "" " Set as Default Printer This button sets the current printer as " "the user's default.

Note: (Button is only visible if the checkbox " "for System Options --> General --> Miscellaneous: \"Defaults to the last printer used in the application\" is " "disabled.) " msgstr "" #: kprintdialog.cpp:265 management/kmmainview.cpp:289 management/kmwend.cpp:90 #: management/smbview.cpp:43 msgid "Printer" msgstr "ਪਰਿੰਟਰ" #: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56 #: management/kxmlcommanddlg.cpp:114 msgid "&Name:" msgstr "ਨਾਂ(&N):" #: kprintdialog.cpp:280 management/kminfopage.cpp:50 msgid "" "_: Status\n" "State:" msgstr "ਹਾਲਤ" #: kprintdialog.cpp:282 management/kminfopage.cpp:48 msgid "Type:" msgstr "ਕਿਸਮ:" #: kprintdialog.cpp:284 management/kmwname.cpp:40 msgid "Location:" msgstr "ਟਿਕਾਣਾ:" #: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176 msgid "Comment:" msgstr "ਟਿੱਪਣੀ:" #: kprintdialog.cpp:289 msgid "P&roperties" msgstr "ਵਿਸ਼ੇਸਤਾ(&r)" #: kprintdialog.cpp:291 msgid "System Op&tions" msgstr "ਸਿਸਟਮ ਚੋਣ(&t)" #: kprintdialog.cpp:293 msgid "Set as &Default" msgstr "ਮੂਲ ਨਿਰਧਾਰਿਤ ਕਰੋ(&D)" #: kprintdialog.cpp:300 msgid "Toggle selective view on printer list" msgstr "" #: kprintdialog.cpp:305 msgid "Add printer..." msgstr "ਪਰਿੰਟਰ ਸ਼ਾਮਿਲ..." #: kprintdialog.cpp:313 msgid "Previe&w" msgstr "ਝਲਕ(&w)" #: kprintdialog.cpp:315 msgid "O&utput file:" msgstr "ਆਉਟਪੁੱਟ ਫਾਇਲ(&u):" #: kprintdialog.cpp:321 msgid "Print co&mmand:" msgstr "" #: kprintdialog.cpp:330 msgid "Show/hide advanced options" msgstr "ਤਕਨੀਕੀ ਚੋਣਾਂ ਵੇਖਾਓ/ਓਹਲੇ" #: kprintdialog.cpp:332 msgid "&Keep this dialog open after printing" msgstr "ਛਾਪਣ ਮਗਰੋਂ ਇਹ ਵਾਰਤਾਲਾਪ ਖੁੱਲ੍ਹਾ ਰੱਖੋ(&K)" #: kprintdialog.cpp:551 kprintdialog.cpp:939 msgid "An error occurred while retrieving the printer list:" msgstr "ਪਰਿੰਟਰ ਲਿਸਟ ਲੈਣ ਦੌਰਾਨ ਗਲਤੀ ਆਈ ਹੈ।" #: kprintdialog.cpp:715 msgid "The output filename is empty." msgstr "ਆਉਟਪੁੱਟ ਫਾਇਲ ਨਾਂ ਖਾਲੀ ਹੈ।" #: kprintdialog.cpp:754 msgid "You don't have write permissions to this file." msgstr "" #: kprintdialog.cpp:760 msgid "The output directory does not exist." msgstr "ਆਉਟਪੁੱਟ ਡਾਇਰੈਕਟਰੀ ਮੌਜੂਦ ਨਹੀਂ ਹੈ।" #: kprintdialog.cpp:762 msgid "You don't have write permissions in that directory." msgstr "" #: kprintdialog.cpp:874 msgid "&Options <<" msgstr "ਚੋਣ(&O) <<" #: kprintdialog.cpp:887 msgid "&Options >>" msgstr "ਚੋਣ(&O) >>" #: kprintdialog.cpp:929 msgid "Initializing printing system..." msgstr "ਪਰਿੰਟਰ ਸਿਸਟਮ ਚਾਲੂ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ..." #: kprintdialog.cpp:965 msgid "Print to File" msgstr "ਫਾਇਲ ਛਾਪੋ" #: kprinter.cpp:280 msgid "Initialization..." msgstr "ਚਾਲੂ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ..." #: kprinter.cpp:283 kprinter.cpp:909 #, c-format msgid "Generating print data: page %1" msgstr "" #: kprinter.cpp:429 msgid "Previewing..." msgstr "ਝਲਕ ਤਿਆਰ ਕੀਤੀ ਜਾ ਰਹੀ ਹੈ..." #: kprinter.cpp:690 tdeprintd.cpp:158 #, c-format msgid "" "

A print error occurred. Error message received from system:
%1" msgstr "" #: kprinterimpl.cpp:156 msgid "Cannot copy multiple files into one file." msgstr "" #: kprinterimpl.cpp:165 msgid "Cannot save print file to %1. Check that you have write access to it." msgstr "" #: kprinterimpl.cpp:233 #, c-format msgid "Printing document: %1" msgstr "%1 :ਦਸਤਾਵੇਜ਼ ਛਾਪਿਆ ਜਾ ਰਿਹਾ ਹੈ" #: kprinterimpl.cpp:251 #, c-format msgid "Sending print data to printer: %1" msgstr "" #: kprinterimpl.cpp:279 msgid "Unable to start child print process. " msgstr "" #: kprinterimpl.cpp:281 msgid "" "The TDE print server (tdeprintd) could not be contacted. Check that " "this server is running." msgstr "" #: kprinterimpl.cpp:283 msgid "" "_: 1 is the command that is given to\n" "Check the command syntax:\n" "%1 " msgstr "" #: kprinterimpl.cpp:290 msgid "No valid file was found for printing. Operation aborted." msgstr "" #: kprinterimpl.cpp:325 msgid "" "

Unable to perform the requested page selection. The filter psselect cannot be inserted in the current filter chain. See Filter tab in " "the printer properties dialog for further information.

" msgstr "" #: kprinterimpl.cpp:355 msgid "

Could not load filter description for %1.

" msgstr "" #: kprinterimpl.cpp:371 msgid "" "

Error while reading filter description for %1. Empty command line " "received.

" msgstr "" #: kprinterimpl.cpp:385 msgid "" "The MIME type %1 is not supported as input of the filter chain (this may " "happen with non-CUPS spoolers when performing page selection on a non-" "PostScript file). Do you want TDE to convert the file to a supported format?" "

" msgstr "" #: kprinterimpl.cpp:389 kprinterimpl.cpp:509 msgid "Convert" msgstr "ਤਬਦੀਲ" #: kprinterimpl.cpp:399 msgid "Select MIME Type" msgstr "" #: kprinterimpl.cpp:400 msgid "Select the target format for the conversion:" msgstr "" #: kprinterimpl.cpp:404 kprinterimpl.cpp:430 msgid "Operation aborted." msgstr "ਕਾਰਵਾਈ ਅਧੂਰੀ ਛੱਡੀ ਗਈ।" #: kprinterimpl.cpp:410 msgid "No appropriate filter found. Select another target format." msgstr "" #: kprinterimpl.cpp:423 msgid "" "Operation failed with message:
%1
Select another target format." msgstr "" #: kprinterimpl.cpp:441 msgid "Filtering print data" msgstr "" #: kprinterimpl.cpp:445 msgid "Error while filtering. Command was: %1." msgstr "" #: kprinterimpl.cpp:487 msgid "The print file is empty and will be ignored:

%1

" msgstr "" #: kprinterimpl.cpp:497 msgid "" "The file format %1 is not directly supported by the current " "print system. You now have 3 options:
  • TDE can attempt to convert " "this file automatically to a supported format. (Select Convert)
  • You can try to send the file to the printer without any conversion. " "(Select Keep)
  • You can cancel the printjob. (Select " "Cancel)
Do you want TDE to attempt and convert this file " "to %2?
" msgstr "" #: kprinterimpl.cpp:510 management/kmwname.cpp:62 msgid "Keep" msgstr "ਰੱਖੋ" #: kprinterimpl.cpp:518 msgid "" "No appropriate filter was found to convert the file format %1 into %2." "
  • Go to System Options -> Commands to look through the list " "of possible filters. Each filter executes an external program.
  • See " "if the required external program is available.on your system.
" msgstr "" #: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138 msgid "Printer Configuration" msgstr "ਪਰਿੰਟਰ ਸੰਰਚਨਾ" #: kprinterpropertydialog.cpp:138 msgid "No configurable options for that printer." msgstr "" #: kprintpreview.cpp:140 msgid "Do you want to continue printing anyway?" msgstr "ਕੀ ਤੁਸੀਂ ਕਿਸੇ ਵੀ ਤਰ੍ਹਾਂ ਛਾਪਣਾ ਚਾਹੁੰਦੇ ਹੋ?" #: kprintpreview.cpp:148 kprintpreview.cpp:227 msgid "Print Preview" msgstr "ਛਾਪ ਦਾ ਨਮੂਨਾ" #: kprintpreview.cpp:278 msgid "" "The preview program %1 cannot be found. Check that the program is correctly " "installed and located in a directory included in your PATH environment " "variable." msgstr "" #: kprintpreview.cpp:303 msgid "" "Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor " "any other external PostScript viewer could be found." msgstr "" #: kprintpreview.cpp:307 #, c-format msgid "" "Preview failed: TDE could not find any application to preview files of type " "%1." msgstr "" #: kprintpreview.cpp:317 #, c-format msgid "Preview failed: unable to start program %1." msgstr "" #: kprintpreview.cpp:322 msgid "Do you want to continue printing?" msgstr "" #: kprintprocess.cpp:75 msgid "File transfer failed." msgstr "" #: kprintprocess.cpp:81 msgid "Abnormal process termination (%1)." msgstr "" #: kprintprocess.cpp:83 msgid "%1: execution failed with message:

%2

" msgstr "" #: kxmlcommand.cpp:789 msgid "One of the command object's requirements is not met." msgstr "ਕਮਾਂਡ ਇਕਾਈ ਦੀ ਇੱਕ ਲੋੜ ਪੂਰੀ ਨਹੀ ਹੋਈ ਹੈ।" #: kxmlcommand.cpp:797 kxmlcommand.cpp:802 #, c-format msgid "The command does not contain the required tag %1." msgstr "ਕਮਾਂਡ ਵਿੱਚ ਲੋੜੀਦਾ ਟੈਗ %1 ਨਹੀਂ ਹੈ।" #: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53 msgid "" "The %1 executable could not be found in your path. Check your " "installation." msgstr "" "%1 ਚੱਲਣਯੋਗ ਹਾਲਤ 'ਚ ਤੁਹਾਡੇ ਮਾਰਗ 'ਚ ਨਹੀਂ ਲੱਭਿਆ ਜਾ ਸਕਿਆ। ਆਪਣੀ ਇੰਸਟਾਲੇਸ਼ਨ ਦੀ ਜਾਂਚ " "ਕਰੋ।" #: lpd/kmlpdmanager.cpp:87 msgid "Local printer queue (%1)" msgstr "ਲੋਕਲ ਪਰਿੰਟਰ ਕਤਾਰ (%1)" #: lpd/kmlpdmanager.cpp:87 msgid "" "_: Unknown type of local printer queue\n" "Unknown" msgstr "ਅਣਜਾਣ" #: lpd/kmlpdmanager.cpp:88 msgid "" msgstr "<ਉਪਲੱਬਧ ਨਹੀਂ>" #: lpd/kmlpdmanager.cpp:89 msgid "" "_: Unknown Driver\n" "Unknown" msgstr "ਅਣਜਾਣ" #: lpd/kmlpdmanager.cpp:95 msgid "Remote LPD queue %1@%2" msgstr "ਰਿਮੋਟ LPD ਕਤਾਰ %1@%2" #: lpd/kmlpdmanager.cpp:158 msgid "Unable to create spool directory %1 for printer %2." msgstr "ਪਰਿੰਟਰ %2 ਲਈ ਸਪੂਲ ਡਾਇਰੈਕਟਰੀ %1 ਬਣਾਉਣ ਲਈ ਅਸਫ਼ਲ ਹੈ।" #: lpd/kmlpdmanager.cpp:165 msgid "Unable to save information for printer %1." msgstr "ਪਰਿੰਟਰ %1 ਲਈ ਜਾਣਕਾਰੀ ਸੰਭਾਲਣ ਲਈ ਅਸਫ਼ਲ ਹੈ।" #: lpd/kmlpdmanager.cpp:193 msgid "" "Unable to set correct permissions on spool directory %1 for printer %2." msgstr "ਪਰਿੰਟਰ %2 ਲਈ ਸਪੂਲ ਡਾਇਰੈਕਟਰੀ %1 ਲਈ ਠੀਕ ਅਧਿਕਾਰ ਦੇਣ ਕਰਨ ਲਈ ਅਸਫ਼ਲ ਹੈ।" #: lpd/kmlpdmanager.cpp:237 msgid "Permission denied: you must be root." msgstr "ਅਧਿਕਾਰ ਪਾਬੰਦੀ: ਤੁਹਾਨੂੰ root ਹੋਣਾ ਚਾਹੀਦਾ ਹੈ।" #: lpd/kmlpdmanager.cpp:244 msgid "Unable to execute command \"%1\"." msgstr "\"%1\" ਕਮਾਂਡ ਚਲਾਉਣ ਲਈ ਅਸਫ਼ਲ ਹੈ।" #: lpd/kmlpdmanager.cpp:317 msgid "Unable to write printcap file." msgstr "printcap ਫਾਇਲ ਲਿਖਣ ਲਈ ਅਸਫ਼ਲ ਹੈ।" #: lpd/kmlpdmanager.cpp:372 msgid "Couldn't find driver %1 in printtool database." msgstr "printcap ਡਾਟਾਬੇਸ ਵਿੱਚ %1 ਡਰਾਇਵਰ ਲੱਭਿਆ ਗਿਆ ਹੈ।" #: lpd/kmlpdmanager.cpp:411 msgid "Couldn't find printer %1 in printcap file." msgstr "printcap ਫਾਇਲ ਵਿੱਚ ਪਰਿੰਟਰ %1 ਖੋਜਿਆ ਨਹੀਂ ਜਾ ਸਕਿਆ ਹੈ।" #: lpd/kmlpdmanager.cpp:440 msgid "No driver found (raw printer)" msgstr "ਕੋਈ ਡਰਾਇਵਰ ਨਹੀਂ ਲੱਭਿਆ (ਕੱਚਾ(raw) ਪਰਿੰਟਰ)" #: lpd/kmlpdmanager.cpp:442 msgid "Printer type not recognized." msgstr "ਪਰਿੰਟਰ ਅਣਜਾਣ ਹੈ।" #: lpd/kmlpdmanager.cpp:452 msgid "" "The driver device %1 is not compiled in your GhostScript " "distribution. Check your installation or use another driver." msgstr "" #: lpd/kmlpdmanager.cpp:560 msgid "Unable to write driver associated files in spool directory." msgstr "ਸਪੂਲ ਡਰਾਇਵਰ ਵਿੱਚ ਫਾਇਲਾਂ ਨਾਲ ਸਬੰਧਤ ਡਰਾਇਵਰ ਲਿਖਣ ਵਿੱਚ ਅਸਫ਼ਲ ਹੈ।" #: lpd/kmlpduimanager.cpp:44 msgid "Local printer (parallel, serial, USB)" msgstr "ਲੋਕਲ ਪਰਿੰਟਰ (ਪੈਰਲੱਲ, ਸੀਰੀਅਲ, USB)" #: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68 #: rlpr/kmwrlpr.cpp:116 msgid "Remote LPD queue" msgstr "ਰਿਮੋਟ LPD ਕਤਾਰ" #: lpd/kmlpduimanager.cpp:46 msgid "SMB shared printer (Windows)" msgstr "SMB ਸਾਂਝਾ ਪਰਿੰਟਰ (Windows)" #: lpd/kmlpduimanager.cpp:47 msgid "Network printer (TCP)" msgstr "ਨੈੱਟਵਰਕ ਪਰਿੰਟਰ (TCP)" #: lpd/kmlpduimanager.cpp:48 msgid "File printer (print to file)" msgstr "ਫਾਇਲ ਪਰਿੰਟਰ (ਫਾਇਲ ਵਿੱਚ ਛਾਪੋ)" #: lpd/lpdtools.cpp:31 msgid "A4" msgstr "A4" #: lpd/lpdtools.cpp:32 msgid "A3" msgstr "A3" #: lpd/lpdtools.cpp:33 msgid "B4" msgstr "B4" #: lpd/lpdtools.cpp:34 msgid "B5" msgstr "B5" #: lpd/lpdtools.cpp:233 msgid "GhostScript settings" msgstr "ਗੋਸਟਸਕਰਿਪਟ ਸਥਾਪਨ" #: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53 #: management/kmwend.cpp:104 msgid "Driver" msgstr "ਡਰਾਇਵਰ" #: lpd/lpdtools.cpp:254 msgid "Resolution" msgstr "ਰੈਜ਼ੋਲੇਸ਼ਨ" #: lpd/lpdtools.cpp:277 msgid "Color depth" msgstr "ਰੰਗ ਗਹਿਰਾਈ" #: lpd/lpdtools.cpp:301 msgid "Additional GS options" msgstr "ਹੋਰ GS ਚੋਣ" #: lpd/lpdtools.cpp:313 msgid "Page size" msgstr "ਸਫਾ ਆਕਾਰ" #: lpd/lpdtools.cpp:329 msgid "Pages per sheet" msgstr "ਪ੍ਰਤੀ ਸ਼ੀਟ ਸਫ਼ੇ" #: lpd/lpdtools.cpp:345 msgid "Left/right margin (1/72 in)" msgstr "ਖੱਬੇ/ਸੱਜੇ ਹਾਸ਼ੀਆ (1/72 ਇੰਚ)" #: lpd/lpdtools.cpp:350 msgid "Top/bottom margin (1/72 in)" msgstr "ਉੱਤੇ/ਹੇਠਾਂ ਹਾਸ਼ੀਆ (1/72 ਇੰਚ)" #: lpd/lpdtools.cpp:356 msgid "Text options" msgstr "ਪਾਠ ਚੋਣ" #: lpd/lpdtools.cpp:362 msgid "Send EOF after job to eject page" msgstr "ਕੰਮ ਵਲੋਂ ਸਫ਼ਾ ਬਾਹਰ ਕੱਢਣ ਤੇ EOF ਭੇਜੋ" #: lpd/lpdtools.cpp:370 msgid "Fix stair-stepping text" msgstr "" #: lpd/lpdtools.cpp:382 msgid "Fast text printing (non-PS printers only)" msgstr "ਤੇਜ਼ ਪਾਠ ਛਪਾਈ (ਨਾ-PS ਪਰਿੰਟਰ ਹੀ)" #: lpdunix/kmlpdunixmanager.cpp:210 msgid "Description unavailable" msgstr "ਵੇਰਵਾ ਉਪਲੱਬਧ ਨਹੀਂ ਹੈ" #: lpdunix/kmlpdunixmanager.cpp:220 lpdunix/kmlpdunixmanager.cpp:271 #: lpdunix/kmlpdunixmanager.cpp:318 lpdunix/kmlpdunixmanager.cpp:380 #, c-format msgid "Remote printer queue on %1" msgstr "" #: lpdunix/kmlpdunixmanager.cpp:222 lpdunix/kmlpdunixmanager.cpp:274 #: lpdunix/kmlpdunixmanager.cpp:320 lpdunix/kmlpdunixmanager.cpp:342 #: lpdunix/kmlpdunixmanager.cpp:382 management/kminfopage.cpp:118 msgid "Local printer" msgstr "" #: lpr/apshandler.cpp:68 msgid "APS Driver (%1)" msgstr "APS ਡਰਾਇਵਰ (%1)" #: lpr/apshandler.cpp:112 lpr/lprhandler.cpp:74 lpr/lprngtoolhandler.cpp:72 msgid "Network printer (%1)" msgstr "ਨੈੱਟਵਰਕ ਪਰਿੰਟਰ (%1)" #: lpr/apshandler.cpp:215 lpr/lprhandler.cpp:127 lpr/lprngtoolhandler.cpp:276 #: lpr/matichandler.cpp:421 #, c-format msgid "Unsupported backend: %1." msgstr "ਨਾ-ਸਹਾਇਕ ਪਿੱਠਵਰਤੀ: %1" #: lpr/apshandler.cpp:221 #, c-format msgid "Unable to create directory %1." msgstr "ਡਾਇਰੈਕਟਰੀ %1 ਬਣਾਉਣ ਲਈ ਅਸਫ਼ਲ ਹੈ।" #: lpr/apshandler.cpp:241 #, c-format msgid "Missing element: %1." msgstr "ਗੁੰਮ ਇਕਾਈ: %1" #: lpr/apshandler.cpp:258 lpr/apshandler.cpp:289 lpr/lprngtoolhandler.cpp:323 #, c-format msgid "Invalid printer backend specification: %1" msgstr "ਗਲਤ ਡਰਾਇਵਰ ਬੈਕਐਂਡ ਨਿਰਧਾਰਨ: %1" #: lpr/apshandler.cpp:264 lpr/apshandler.cpp:295 lpr/apshandler.cpp:367 #, c-format msgid "Unable to create the file %1." msgstr "ਫਾਇਲ %1 ਬਣਾਉਣ ਲਈ ਅਸਫ਼ਲ ਹੈ।" #: lpr/apshandler.cpp:322 msgid "The APS driver is not defined." msgstr "APS ਡਰਾਇਵਰ ਪਰਭਾਸ਼ਿਤ ਨਹੀਂ ਹੈ।" #: lpr/apshandler.cpp:380 #, c-format msgid "Unable to remove directory %1." msgstr "ਡਾਇਰੈਕਟਰੀ %1 ਹਟਾਉਣ ਲਈ ਅਸਫ਼ਲ ਹੈ।" #: lpr/editentrydialog.cpp:40 msgid "Aliases:" msgstr "ਉਪ-ਨਾਂ:" #: lpr/editentrydialog.cpp:46 management/kxmlcommanddlg.cpp:107 msgid "String" msgstr "ਸਤਰ" #: lpr/editentrydialog.cpp:47 msgid "Number" msgstr "ਅੰਕ" #: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111 msgid "Boolean" msgstr "ਬੁਲੀਅਨ" #: lpr/editentrydialog.cpp:72 #, c-format msgid "Printcap Entry: %1" msgstr "" #: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37 msgid "Spooler" msgstr "ਸਪੂਲਰ" #: lpr/kmconfiglpr.cpp:34 msgid "Spooler Settings" msgstr "ਸਪੂਲਰ ਸੈਟਿੰਗ" #: lpr/kmlprjobmanager.cpp:83 msgid "Unsupported operation." msgstr "ਨਾ-ਸਹਾਇਕ ਕਾਰਵਾਈ ਹੈ।" #: lpr/kmlprmanager.cpp:289 msgid "The printcap file is a remote file (NIS). It cannot be written." msgstr "printcap ਫਾਇਲ ਇੱਕ ਰਿਮੋਟ ਫਾਇਲ (NIS) ਹੈ। ਇਸ ਨੂੰ ਲਿਖਿਆ ਨਹੀਂ ਜਾ ਸਕਿਆ ਹੈ।" #: lpr/kmlprmanager.cpp:305 msgid "" "Unable to save printcap file. Check that you have write permissions for that " "file." msgstr "" #: lpr/kmlprmanager.cpp:330 msgid "Internal error: no handler defined." msgstr "ਅੰਦਰੂਨੀ ਗਲਤੀ: ਕੋਈ ਹੈਂਡਲਰ ਨਹੀਂ ਹੈ।" #: lpr/kmlprmanager.cpp:344 msgid "Couldn't determine spool directory. See options dialog." msgstr "ਸਪੂਲ ਡਾਇਰੈਕਟਰੀ ਖੋਜੀ ਨਹੀਂ ਜਾ ਸਕੀ ਹੈ। ਚੋਣ ਵਾਰਤਾਲਾਪ ਵੇਖੋ।" #: lpr/kmlprmanager.cpp:350 msgid "" "Unable to create the spool directory %1. Check that you have the required " "permissions for that operation." msgstr "" "ਸਪੂਲ ਡਾਇਰੈਕਟਰੀ %1 ਬਣਾਈ ਨਹੀਂ ਜਾ ਸਕੀ ਹੈ। ਇਹ ਕਾਰਵਾਈ ਕਰਨ ਲਈ ਆਪਣੇ ਅਧਿਕਾਰਾਂ ਦੀ ਜਾਂਚ ਕਰੋ।" #: lpr/kmlprmanager.cpp:382 #, c-format msgid "" "The printer has been created but the print daemon could not be restarted. %1" msgstr "" #: lpr/kmlprmanager.cpp:410 msgid "" "Unable to remove spool directory %1. Check that you have write permissions " "for that directory." msgstr "" #: lpr/kmlprmanager.cpp:458 msgid "&Edit printcap Entry..." msgstr "" #: lpr/kmlprmanager.cpp:473 msgid "" "Editing a printcap entry manually should only be done by confirmed system " "administrator. This may prevent your printer from working. Do you want to " "continue?" msgstr "" #: lpr/kmlprmanager.cpp:489 #, c-format msgid "Spooler type: %1" msgstr "ਸਪੂਲਰ ਕਿਸਮ: %1" #: lpr/lpchelper.cpp:235 lpr/lpchelper.cpp:273 lpr/lpchelper.cpp:291 #: lpr/lpchelper.cpp:314 msgid "The executable %1 couldn't be found in your PATH." msgstr "" #: lpr/lpchelper.cpp:256 lpr/lpchelper.cpp:280 lpr/lpchelper.cpp:298 msgid "Permission denied." msgstr "ਅਧਿਕਾਰ ਪਾਬੰਦੀ ਹੈ।" #: lpr/lpchelper.cpp:259 msgid "Printer %1 does not exist." msgstr "ਪਰਿੰਟਰ %1 ਮੌਜੂਦ ਨਹੀਂ ਹੈ।" #: lpr/lpchelper.cpp:263 #, c-format msgid "Unknown error: %1" msgstr "ਅਣਜਾਣੀ ਗਲਤੀ: %1" #: lpr/lpchelper.cpp:282 #, c-format msgid "Execution of lprm failed: %1" msgstr "" #: lpr/lprhandler.cpp:59 lpr/lprhandler.cpp:97 msgid "Unknown (unrecognized entry)" msgstr "ਅਣਜਾਣ (ਨਾ-ਪਛਾਣਨਯੋਗ ਇੰਦਰਾਜ਼)" #: lpr/lprhandler.cpp:67 lpr/lprhandler.cpp:91 msgid "Remote queue (%1) on %2" msgstr "%2 ਉੱਤੇ ਰਿਮੋਟ ਕਤਾਰ (%1)" #: lpr/lprhandler.cpp:81 lpr/matichandler.cpp:86 #, c-format msgid "Local printer on %1" msgstr "%1 ਉੱਤੇ ਲੋਕਲ ਪਰਿੰਟਰ" #: lpr/lprhandler.cpp:104 lpr/lprhandler.cpp:110 lpr/lprhandler.cpp:116 msgid "Unrecognized entry." msgstr "ਬੇਪਛਾਣ ਇੰਦਰਾਜ਼ ਹੈ।" #: lpr/lprngtoolhandler.cpp:99 msgid "IFHP Driver (%1)" msgstr "IFHP ਡਰਾਇਵਰ (%1)" #: lpr/lprngtoolhandler.cpp:99 lpr/lprngtoolhandler.cpp:170 msgid "unknown" msgstr "ਅਣਜਾਣ" #: lpr/lprngtoolhandler.cpp:162 msgid "No driver defined for that printer. It might be a raw printer." msgstr "ਉਸ ਪਰਿੰਟਰ ਲਈ ਕੋਈ ਡਰਾਇਵਰ ਨਹੀਂ ਮਿਲਿਆ ਹੈ। ਇਹ ਕੱਚਾ (raw) ਪਰਿੰਟਰ ਹੋਣਾ ਚਾਹੀਦਾ ਹੈ।" #: lpr/lprngtoolhandler.cpp:170 msgid "LPRngTool Common Driver (%1)" msgstr "LPRngTool ਆਮ ਡਰਾਇਵਰ (%1)" #: lpr/matichandler.cpp:82 msgid "Network printer" msgstr "ਨੈੱਟਵਰਕ ਪਰਿੰਟਰ" #: lpr/matichandler.cpp:245 msgid "Internal error." msgstr "ਅੰਦਰੂਨੀ ਗਲਤੀ ਹੈ।" #: lpr/matichandler.cpp:339 msgid "" "You probably don't have the required permissions to perform that operation." msgstr "" #: lpr/matichandler.cpp:426 msgid "" "Unable to find executable lpdomatic. Check that Foomatic is correctly " "installed and that lpdomatic is installed in a standard location." msgstr "" #: lpr/matichandler.cpp:457 #, c-format msgid "Unable to remove driver file %1." msgstr "" #: management/kaddprinterwizard.cpp:10 msgid "Configure TDE Print" msgstr "" #: management/kaddprinterwizard.cpp:11 msgid "Configure print server" msgstr "" #: management/kaddprinterwizard.cpp:18 msgid "Start the add printer wizard" msgstr "" #: management/kmconfigcommand.cpp:33 msgid "Commands" msgstr "ਕਮਾਂਡਾਂ" #: management/kmconfigcommand.cpp:34 msgid "Command Settings" msgstr "" #: management/kmconfigcommand.cpp:37 msgid "Edit/Create Commands" msgstr "" #: management/kmconfigcommand.cpp:39 msgid "" "

Command objects perform a conversion from input to output.
They are " "used as the basis to build both print filters and special printers. They are " "described by a command string, a set of options, a set of requirements and " "associated mime types. Here you can create new command objects and edit " "existing ones. All changes will only be effective for you." msgstr "" #: management/kmconfigdialog.cpp:38 msgid "TDE Print Configuration" msgstr "" #: management/kmconfigfilter.cpp:40 msgid "Filter" msgstr "ਫਿਲਟਰ" #: management/kmconfigfilter.cpp:41 msgid "Printer Filtering Settings" msgstr "ਪਰਿੰਟਰ ਫਿਲਟਰ ਸੈਟਿੰਗ" #: management/kmconfigfilter.cpp:44 msgid "Printer Filter" msgstr "ਪਰਿੰਟਰ ਫਿਲਟਰ" #: management/kmconfigfilter.cpp:56 msgid "" "The printer filtering allows you to view only a specific set of printers " "instead of all of them. This may be useful when there are a lot of printers " "available but you only use a few ones. Select the printers you want to see " "from the list on the left or enter a Location filter (ex: Group_1*). " "Both are cumulative and ignored if empty." msgstr "" #: management/kmconfigfilter.cpp:62 msgid "Location filter:" msgstr "ਟਿਕਾਣਾ ਫਿਲਟਰ:" #: management/kmconfigfonts.cpp:43 msgid "Font Settings" msgstr "ਫੋਂਟ ਸਥਾਪਨ" #: management/kmconfigfonts.cpp:46 msgid "Fonts Embedding" msgstr "" #: management/kmconfigfonts.cpp:47 msgid "Fonts Path" msgstr "ਫੋਂਟ ਮਾਰਗ" #: management/kmconfigfonts.cpp:49 msgid "&Embed fonts in PostScript data when printing" msgstr "" #: management/kmconfigfonts.cpp:57 msgid "&Up" msgstr "ਉੱਪਰ(&U)" #: management/kmconfigfonts.cpp:58 msgid "&Down" msgstr "ਹੇਠਾਂ(&D)" #: management/kmconfigfonts.cpp:59 msgid "&Add" msgstr "ਸ਼ਾਮਿਲ(&A)" #: management/kmconfigfonts.cpp:61 msgid "Additional director&y:" msgstr "" #: management/kmconfigfonts.cpp:85 msgid "" "These options will automatically put fonts in the PostScript file which are " "not present on the printer. Font embedding usually produces better print " "results (closer to what you see on the screen), but larger print data as " "well." msgstr "" #: management/kmconfigfonts.cpp:89 msgid "" "When using font embedding you can select additional directories where TDE " "should search for embeddable font files. By default, the X server font path " "is used, so adding those directories is not needed. The default search path " "should be sufficient in most cases." msgstr "" #: management/kmconfiggeneral.cpp:45 management/kmpropgeneral.cpp:55 msgid "General Settings" msgstr "ਸਧਾਰਨ ਸਥਾਪਨ" #: management/kmconfiggeneral.cpp:48 msgid "Refresh Interval" msgstr "" #: management/kmconfiggeneral.cpp:51 msgid " sec" msgstr " ਸਕਿੰਟ" #: management/kmconfiggeneral.cpp:53 msgid "" "This time setting controls the refresh rate of various TDE Print " "components like the print manager and the job viewer." msgstr "" #: management/kmconfiggeneral.cpp:57 msgid "Test Page" msgstr "" #: management/kmconfiggeneral.cpp:58 msgid "&Specify personal test page" msgstr "" #: management/kmconfiggeneral.cpp:60 msgid "Preview..." msgstr "ਝਲਕ..." #: management/kmconfiggeneral.cpp:70 msgid "Sho&w printing status message box" msgstr "" #: management/kmconfiggeneral.cpp:71 msgid "De&faults to the last printer used in the application" msgstr "" #: management/kmconfiggeneral.cpp:127 msgid "" "The selected test page is not a PostScript file. You may not be able to test " "your printer anymore." msgstr "" #: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60 msgid "Empty file name." msgstr "ਫਾਇਲ ਨਾਂ ਖਾਲੀ ਹੈ।" #: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59 msgid "Jobs" msgstr "ਕੰਮ" #: management/kmconfigjobs.cpp:34 management/kmjobviewer.cpp:718 msgid "Print Job Settings" msgstr "" #: management/kmconfigjobs.cpp:37 msgid "Jobs Shown" msgstr "" #: management/kmconfigjobs.cpp:41 management/kmjobviewer.cpp:172 #: management/kmjobviewer.cpp:343 msgid "Unlimited" msgstr "ਬੇਅੰਤ " #: management/kmconfigjobs.cpp:42 msgid "Maximum number of jobs shown:" msgstr "" #: management/kmconfigpreview.cpp:35 msgid "Preview" msgstr "ਨਮੂਨਾ" #: management/kmconfigpreview.cpp:36 msgid "Preview Settings" msgstr "ਝਲਕ ਸੈਟਿੰਗ" #: management/kmconfigpreview.cpp:39 msgid "Preview Program" msgstr "ਝਲਕ ਪਰੋਗਰਾਮ" #: management/kmconfigpreview.cpp:41 msgid "&Use external preview program" msgstr "" #: management/kmconfigpreview.cpp:44 msgid "" "You can use an external preview program (PS viewer) instead of the TDE built-" "in preview system. Note that if the TDE default PS viewer (KGhostView) " "cannot be found, TDE tries automatically to find another external PostScript " "viewer" msgstr "" #: management/kmdbcreator.cpp:92 msgid "" "No executable defined for the creation of the driver database. This " "operation is not implemented." msgstr "" #: management/kmdbcreator.cpp:95 msgid "" "The executable %1 could not be found in your PATH. Check that this program " "exists and is accessible in your PATH variable." msgstr "" #: management/kmdbcreator.cpp:99 msgid "" "Unable to start the creation of the driver database. The execution of %1 " "failed." msgstr "" #: management/kmdbcreator.cpp:113 msgid "Please wait while TDE rebuilds a driver database." msgstr "" #: management/kmdbcreator.cpp:114 msgid "Driver Database" msgstr "" #: management/kmdbcreator.cpp:171 msgid "" "Error while creating driver database: abnormal child-process termination." msgstr "" #: management/kmdriverdbwidget.cpp:51 msgid "&PostScript printer" msgstr "" #: management/kmdriverdbwidget.cpp:52 msgid "&Raw printer (no driver needed)" msgstr "" #: management/kmdriverdbwidget.cpp:55 msgid "&Other..." msgstr "ਹੋਰ(&O)..." #: management/kmdriverdbwidget.cpp:56 msgid "&Manufacturer:" msgstr "ਨਿਰਮਾਤਾ(&M):" #: management/kmdriverdbwidget.cpp:57 msgid "Mo&del:" msgstr "ਮਾਡਲ(&d):" #: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166 msgid "Loading..." msgstr "ਲੋਡ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ..." #: management/kmdriverdbwidget.cpp:217 msgid "Unable to find the PostScript driver." msgstr "" #: management/kmdriverdbwidget.cpp:230 msgid "Select Driver" msgstr "ਡਰਾਇਵਰ ਚੁਣੋ" #: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249 msgid "" msgstr "" #: management/kmdriverdbwidget.cpp:252 msgid "Database" msgstr "ਡਾਟਾਬੇਸ " #: management/kmdriverdbwidget.cpp:259 msgid "Wrong driver format." msgstr "ਗਲਤ ਡਰਾਇਵਰ ਫਾਰਮੈਟ ਹੈ।" #: management/kmdriverdbwidget.cpp:268 msgid "Other" msgstr "ਹੋਰ" #: management/kmdriverdialog.cpp:48 msgid "" "Some options are in conflict. You must resolve those conflicts before " "continuing." msgstr "" #: management/kminfopage.cpp:44 management/kmpropgeneral.cpp:38 msgid "" "_: Physical Location\n" "Location:" msgstr "" #: management/kminfopage.cpp:46 management/kmpropgeneral.cpp:39 #: management/kmwname.cpp:41 msgid "Description:" msgstr "ਵੇਰਵਾ:" #: management/kminfopage.cpp:54 management/kminfopage.cpp:93 #: tools/escputil/escpwidget.cpp:101 msgid "Device:" msgstr "ਜੰਤਰ:" #: management/kminfopage.cpp:56 msgid "Model:" msgstr "ਮਾਡਲ:" #: management/kminfopage.cpp:92 msgid "Members:" msgstr "" #: management/kminfopage.cpp:112 msgid "Implicit class" msgstr "" #: management/kminfopage.cpp:114 msgid "Remote class" msgstr "" #: management/kminfopage.cpp:115 msgid "Local class" msgstr "" #: management/kminfopage.cpp:117 msgid "Remote printer" msgstr "" #: management/kminfopage.cpp:120 msgid "Special (pseudo) printer" msgstr "" #: management/kminfopage.cpp:121 msgid "" "_: Unknown class of printer\n" "Unknown" msgstr "" #: management/kminstancepage.cpp:61 msgid "" "Define/Edit here instances for the current selected printer. An instance is " "a combination of a real (physical) printer and a set of predefined options. " "For a single InkJet printer, you could define different print formats like " "DraftQuality, PhotoQuality or TwoSided. Those instances " "appear as normal printers in the print dialog and allow you to quickly " "select the print format you want." msgstr "" #: management/kminstancepage.cpp:87 msgid "New..." msgstr "ਨਵਾਂ..." #: management/kminstancepage.cpp:88 msgid "Copy..." msgstr "ਨਕਲ..." #: management/kminstancepage.cpp:92 msgid "Settings" msgstr "ਸਥਾਪਨ" #: management/kminstancepage.cpp:94 msgid "Test..." msgstr "ਟੈਸਟ..." #: management/kminstancepage.cpp:113 management/kminstancepage.cpp:126 #: management/kminstancepage.cpp:138 management/kminstancepage.cpp:145 #: management/kminstancepage.cpp:161 management/kminstancepage.cpp:164 #: management/kminstancepage.cpp:183 management/kminstancepage.cpp:190 #: management/kminstancepage.cpp:192 management/kminstancepage.cpp:210 #: management/kminstancepage.cpp:244 management/kminstancepage.cpp:260 msgid "(Default)" msgstr "(ਮੂਲ)" #: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182 msgid "Instance Name" msgstr "" #: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182 msgid "Enter name for new instance (leave untouched for default):" msgstr "" #: management/kminstancepage.cpp:142 management/kminstancepage.cpp:187 msgid "Instance name must not contain any spaces or slashes." msgstr "" #: management/kminstancepage.cpp:161 msgid "Do you really want to remove instance %1?" msgstr "" #: management/kminstancepage.cpp:161 msgid "" "You can't remove the default instance. However all settings of %1 will be " "discarded. Continue?" msgstr "" #: management/kminstancepage.cpp:213 #, c-format msgid "Unable to find instance %1." msgstr "" #: management/kminstancepage.cpp:215 #, c-format msgid "" "Unable to retrieve printer information. Message from printing system: %1." msgstr "" #: management/kminstancepage.cpp:232 msgid "The instance name is empty. Please select an instance." msgstr "" #: management/kminstancepage.cpp:264 msgid "Internal error: printer not found." msgstr "" #: management/kminstancepage.cpp:265 management/kmmainview.cpp:629 msgid "You are about to print a test page on %1. Do you want to continue?" msgstr "" #: management/kminstancepage.cpp:265 management/kmmainview.cpp:629 msgid "Print Test Page" msgstr "" #: management/kminstancepage.cpp:268 #, c-format msgid "Unable to send test page to %1." msgstr "" #: management/kminstancepage.cpp:270 management/kmmainview.cpp:632 #, c-format msgid "Test page successfully sent to printer %1." msgstr "" #: management/kmjobviewer.cpp:101 management/kmjobviewer.cpp:160 msgid "No Printer" msgstr "" #: management/kmjobviewer.cpp:140 management/kmjobviewer.cpp:179 #: management/kmjobviewer.cpp:196 management/kmjobviewer.cpp:212 #: management/kmjobviewer.cpp:363 management/kmjobviewer.cpp:562 msgid "All Printers" msgstr "ਸਭ ਪਰਿੰਟਰ" #: management/kmjobviewer.cpp:153 #, c-format msgid "Print Jobs for %1" msgstr "" #: management/kmjobviewer.cpp:172 management/kmjobviewer.cpp:174 #: management/kmjobviewer.cpp:343 #, c-format msgid "Max.: %1" msgstr "" #: management/kmjobviewer.cpp:237 msgid "Job ID" msgstr "" #: management/kmjobviewer.cpp:238 msgid "Owner" msgstr "ਮਾਲਕ" #: management/kmjobviewer.cpp:240 msgid "" "_: Status\n" "State" msgstr "" #: management/kmjobviewer.cpp:241 msgid "Size (KB)" msgstr "" #: management/kmjobviewer.cpp:242 msgid "Page(s)" msgstr "ਸਫ਼ਾ" #: management/kmjobviewer.cpp:264 msgid "&Hold" msgstr "" #: management/kmjobviewer.cpp:265 msgid "&Resume" msgstr "ਮੁੜ-ਵਿਚਾਰ(&R)" #: management/kmjobviewer.cpp:266 msgid "Remo&ve" msgstr "ਹਟਾਓ(&v)" #: management/kmjobviewer.cpp:267 msgid "Res&tart" msgstr "" #: management/kmjobviewer.cpp:268 msgid "&Move to Printer" msgstr "" #: management/kmjobviewer.cpp:274 msgid "&Toggle Completed Jobs" msgstr "" #: management/kmjobviewer.cpp:277 msgid "Show Only User Jobs" msgstr "" #: management/kmjobviewer.cpp:278 msgid "Hide Only User Jobs" msgstr "" #: management/kmjobviewer.cpp:286 msgid "User Name" msgstr "ਉਪਭੋਗਤਾ ਨਾਂ" #: management/kmjobviewer.cpp:303 msgid "&Select Printer" msgstr "" #: management/kmjobviewer.cpp:332 msgid "Refresh" msgstr "ਤਾਜ਼ਾ" #: management/kmjobviewer.cpp:336 msgid "Keep window permanent" msgstr "" #: management/kmjobviewer.cpp:493 msgid "" "Unable to perform action \"%1\" on selected jobs. Error received from " "manager:" msgstr "" #: management/kmjobviewer.cpp:505 msgid "Hold" msgstr "ਹੋਲਡ" #: management/kmjobviewer.cpp:510 msgid "Resume" msgstr "ਮੁੜ-ਵਿਚਾਰ" #: management/kmjobviewer.cpp:520 msgid "Restart" msgstr "ਮੁੜ ਚਾਲੂ ਕਰੋ" #: management/kmjobviewer.cpp:528 #, c-format msgid "Move to %1" msgstr "" #: management/kmjobviewer.cpp:693 msgid "Operation failed." msgstr "" #: management/kmlistview.cpp:125 msgid "Print System" msgstr "ਛਾਪਾਈ ਸਿਸਟਮ" #: management/kmlistview.cpp:128 msgid "Classes" msgstr "ਵਰਗ" #: management/kmlistview.cpp:131 msgid "Printers" msgstr "ਪਰਿੰਟਰ" #: management/kmlistview.cpp:134 msgid "Specials" msgstr "ਖਾਸ" #: management/kmmainview.cpp:72 msgid "" "The printer %1 already exists. Continuing will overwrite existing printer. " "Do you want to continue?" msgstr "" #: management/kmmainview.cpp:133 management/kmmainview.cpp:783 #: management/kmmainview.cpp:859 management/kmmainview.cpp:883 msgid "Initializing manager..." msgstr "ਪ੍ਰਬੰਧਕ ਸ਼ੁਰੂ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ..." #: management/kmmainview.cpp:180 msgid "&Icons,&List,&Tree" msgstr "" #: management/kmmainview.cpp:184 msgid "Start/Stop Printer" msgstr "ਪਰਿੰਟਰ ਚਾਲੂ/ਸ਼ੁਰੂ" #: management/kmmainview.cpp:186 msgid "&Start Printer" msgstr "ਪਰਿੰਟਰ ਚਾਲੂ(&S)" #: management/kmmainview.cpp:187 msgid "Sto&p Printer" msgstr "ਪਰਿੰਟਰ ਰੋਕੋ(&p)" #: management/kmmainview.cpp:189 msgid "Enable/Disable Job Spooling" msgstr "" #: management/kmmainview.cpp:191 msgid "&Enable Job Spooling" msgstr "" #: management/kmmainview.cpp:192 msgid "&Disable Job Spooling" msgstr "" #: management/kmmainview.cpp:195 msgid "&Configure..." msgstr "ਸੰਰਚਨਾ(&C)..." #: management/kmmainview.cpp:196 msgid "Add &Printer/Class..." msgstr "" #: management/kmmainview.cpp:197 msgid "Add &Special (pseudo) Printer..." msgstr "" #: management/kmmainview.cpp:198 msgid "Set as &Local Default" msgstr "" #: management/kmmainview.cpp:199 msgid "Set as &User Default" msgstr "" #: management/kmmainview.cpp:200 msgid "&Test Printer..." msgstr "ਪਰਿੰਟਰ ਜਾਂਚ(&T)..." #: management/kmmainview.cpp:201 msgid "Configure &Manager..." msgstr "ਪ੍ਰਬੰਧਕ ਸੰਰਚਨਾ(&M)..." #: management/kmmainview.cpp:202 msgid "Initialize Manager/&View" msgstr "" #: management/kmmainview.cpp:204 msgid "&Orientation" msgstr "ਸਥਿਤੀ(&O)" #: management/kmmainview.cpp:207 msgid "&Vertical,&Horizontal" msgstr "" #: management/kmmainview.cpp:211 msgid "R&estart Server" msgstr "" #: management/kmmainview.cpp:212 msgid "Configure &Server..." msgstr "ਸਰਵਰ ਸੰਰਚਨਾ(&S)..." #: management/kmmainview.cpp:213 #, fuzzy msgid "Configure Server Access..." msgstr "ਸਰਵਰ ਸੰਰਚਨਾ(&S)..." #: management/kmmainview.cpp:216 msgid "Hide &Toolbar" msgstr "" #: management/kmmainview.cpp:218 msgid "Show Me&nu Toolbar" msgstr "ਮੇਨੂ ਸੰਦ-ਪੱਟੀ ਵੇਖਾਓ(&n)" #: management/kmmainview.cpp:219 msgid "Hide Me&nu Toolbar" msgstr "" #: management/kmmainview.cpp:221 msgid "Show Pr&inter Details" msgstr "" #: management/kmmainview.cpp:222 msgid "Hide Pr&inter Details" msgstr "" #: management/kmmainview.cpp:226 msgid "Toggle Printer &Filtering" msgstr "" #: management/kmmainview.cpp:230 msgid "Pri&nter Tools" msgstr "ਪਰਿੰਟ ਸੰਦ(&n)" #: management/kmmainview.cpp:295 msgid "Print Server" msgstr "ਪਰਿੰਟਰ ਸਰਵਰ" #: management/kmmainview.cpp:301 msgid "Print Manager" msgstr "ਪਰਿੰਟਰ ਪ੍ਰੰਬਧਕ" #: management/kmmainview.cpp:334 msgid "An error occurred while retrieving the printer list." msgstr "" #: management/kmmainview.cpp:511 #, c-format msgid "Unable to modify the state of printer %1." msgstr "" #: management/kmmainview.cpp:522 msgid "Do you really want to remove %1?" msgstr "" #: management/kmmainview.cpp:526 #, c-format msgid "Unable to remove special printer %1." msgstr "" #: management/kmmainview.cpp:529 #, c-format msgid "Unable to remove printer %1." msgstr "" #: management/kmmainview.cpp:559 #, c-format msgid "Configure %1" msgstr "ਸੰਰਚਨਾ %1" #: management/kmmainview.cpp:566 #, c-format msgid "Unable to modify settings of printer %1." msgstr "" #: management/kmmainview.cpp:570 #, c-format msgid "Unable to load a valid driver for printer %1." msgstr "" #: management/kmmainview.cpp:582 msgid "Unable to create printer." msgstr "" #: management/kmmainview.cpp:594 msgid "Unable to define printer %1 as default." msgstr "" #: management/kmmainview.cpp:634 #, c-format msgid "Unable to test printer %1." msgstr "" #: management/kmmainview.cpp:647 msgid "Error message received from manager:

%1

" msgstr "" #: management/kmmainview.cpp:649 msgid "Internal error (no error message)." msgstr "" #: management/kmmainview.cpp:667 msgid "Unable to restart print server." msgstr "" #: management/kmmainview.cpp:672 msgid "Restarting server..." msgstr "" #: management/kmmainview.cpp:682 msgid "Unable to configure print server." msgstr "" #: management/kmmainview.cpp:687 msgid "Configuring server..." msgstr "" #: management/kmmainview.cpp:842 msgid "" "Unable to start printer tool. Possible reasons are: no printer selected, the " "selected printer doesn't have any local device defined (printer port), or " "the tool library could not be found." msgstr "" #: management/kmmainview.cpp:866 msgid "Unable to retrieve the printer list." msgstr "" #: management/kmpages.cpp:69 msgid "Instances" msgstr "" #: management/kmpropbackend.cpp:34 msgid "Printer type:" msgstr "" #: management/kmpropbackend.cpp:48 msgid "Interface" msgstr "ਇੰਟਰਫੇਸ" #: management/kmpropbackend.cpp:49 msgid "Interface Settings" msgstr "ਇੰਟਰਫੇਸ ਸਥਾਪਨ" #: management/kmpropbackend.cpp:62 msgid "IPP Printer" msgstr "" #: management/kmpropbackend.cpp:63 msgid "Local USB Printer" msgstr "" #: management/kmpropbackend.cpp:64 msgid "Local Parallel Printer" msgstr "" #: management/kmpropbackend.cpp:65 msgid "Local Serial Printer" msgstr "" #: management/kmpropbackend.cpp:66 msgid "Network Printer (socket)" msgstr "" #: management/kmpropbackend.cpp:67 msgid "SMB printers (Windows)" msgstr "" #: management/kmpropbackend.cpp:69 msgid "File printer" msgstr "" #: management/kmpropbackend.cpp:70 msgid "Serial Fax/Modem printer" msgstr "" #: management/kmpropbackend.cpp:71 msgid "" "_: Unknown Protocol\n" "Unknown" msgstr "" #: management/kmpropcontainer.cpp:35 msgid "Change..." msgstr "ਤਬਦੀਲ..." #: management/kmpropdriver.cpp:36 msgid "Manufacturer:" msgstr "ਨਿਰਮਾਤਾ:" #: management/kmpropdriver.cpp:37 msgid "Printer model:" msgstr "ਪਰਿੰਟਰ ਮਾਡਲ:" #: management/kmpropdriver.cpp:38 msgid "Driver info:" msgstr "ਡਰਾਇਵਰ ਜਾਣਕਾਰੀ:" #: management/kmpropgeneral.cpp:37 msgid "Printer name:" msgstr "" #: management/kmpropmembers.cpp:39 management/kmwend.cpp:59 msgid "Members" msgstr "ਮੈਂਬਰ" #: management/kmpropmembers.cpp:40 msgid "Class Members" msgstr "ਕਲਾਸ ਮੈਂਬਰ" #: management/kmpropwidget.cpp:50 msgid "" "Unable to change printer properties. Error received from manager:

%1" msgstr "" #: management/kmspecialprinterdlg.cpp:46 msgid "Add Special Printer" msgstr "ਖਾਸ ਪਰਿੰਟਰ ਸ਼ਾਮਿਲ" #: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115 #: management/kxmlcommanddlg.cpp:866 msgid "&Description:" msgstr "ਵੇਰਵਾ(&D):" #: management/kmspecialprinterdlg.cpp:58 msgid "&Location:" msgstr "ਸਥਿਤੀ(&L):" #: management/kmspecialprinterdlg.cpp:66 msgid "Command &Settings" msgstr "ਕਮਾਂਡ ਸੈਟਿੰਗ(&S)" #: management/kmspecialprinterdlg.cpp:69 msgid "Outp&ut File" msgstr "ਆਉਟਪੁੱਟ ਫਾਇਲ(&u)" #: management/kmspecialprinterdlg.cpp:71 msgid "&Enable output file" msgstr "" #: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116 msgid "&Format:" msgstr "ਫਾਰਮਿਟ(&F):" #: management/kmspecialprinterdlg.cpp:88 msgid "Filename e&xtension:" msgstr "" #: management/kmspecialprinterdlg.cpp:105 msgid "" "

The command will use an output file. If checked, make sure the command " "contains an output tag.

" msgstr "" #: management/kmspecialprinterdlg.cpp:108 #, c-format msgid "" "

The command to execute when printing on this special printer. Either " "enter the command to execute directly, or associate/create a command object " "with/for this special printer. The command object is the preferred method as " "it provides support for advanced settings like mime type checking, " "configurable options and requirement list (the plain command is only " "provided for backward compatibility). When using a plain command, the " "following tags are recognized:

  • %in: the input file " "(required).
  • %out: the output file (required if using an " "output file).
  • %psl: the paper size in lower case.
  • " "%psu: the paper size with the first letter in upper case.
" msgstr "" #: management/kmspecialprinterdlg.cpp:118 msgid "" "

The default mimetype for the output file (e.g. application/postscript)." msgstr "" #: management/kmspecialprinterdlg.cpp:121 msgid "

The default extension for the output file (e.g. ps, pdf, ps.gz).

" msgstr "" #: management/kmspecialprinterdlg.cpp:170 msgid "You must provide a non-empty name." msgstr "" #: management/kmspecialprinterdlg.cpp:178 #, c-format msgid "Invalid settings. %1." msgstr "ਗਲਤ ਸੈਟਿੰਗ ਹੈ। %1" #: management/kmspecialprinterdlg.cpp:197 #, c-format msgid "Configuring %1" msgstr "%1 ਸੰਰਚਨਾ" #: management/kmwbackend.cpp:54 msgid "Backend Selection" msgstr "ਬੈਕ-ਐਂਡ ਚੋਣ" #: management/kmwbackend.cpp:68 msgid "You must select a backend." msgstr "" #: management/kmwbackend.cpp:115 msgid "&Local printer (parallel, serial, USB)" msgstr "" #: management/kmwbackend.cpp:116 msgid "" "

Locally-connected printer

Use this for a printer connected to " "the computer via a parallel, serial or USB port.

" msgstr "" #: management/kmwbackend.cpp:122 msgid "&SMB shared printer (Windows)" msgstr "" #: management/kmwbackend.cpp:123 msgid "" "

Shared Windows printer

Use this for a printer installed on a " "Windows server and shared on the network using the SMB protocol (samba)." msgstr "" #: management/kmwbackend.cpp:130 msgid "&Remote LPD queue" msgstr "" #: management/kmwbackend.cpp:131 msgid "" "

Print queue on a remote LPD server

Use this for a print queue " "existing on a remote machine running a LPD print server.

" msgstr "" #: management/kmwbackend.cpp:137 msgid "Ne&twork printer (TCP)" msgstr "" #: management/kmwbackend.cpp:138 msgid "" "

Network TCP printer

Use this for a network-enabled printer " "using TCP (usually on port 9100) as communication protocol. Most network " "printers can use this mode.

" msgstr "" #: management/kmwclass.cpp:37 msgid "Class Composition" msgstr "" #: management/kmwclass.cpp:52 msgid "Available printers:" msgstr "" #: management/kmwclass.cpp:53 msgid "Class printers:" msgstr "" #: management/kmwclass.cpp:79 msgid "You must select at least one printer." msgstr "" #: management/kmwdriver.cpp:33 msgid "Printer Model Selection" msgstr "" #: management/kmwdriver.cpp:80 management/kmwend.cpp:106 #: management/kmwname.cpp:83 msgid "Raw printer" msgstr "" #: management/kmwdriver.cpp:113 msgid "Internal error: unable to locate the driver." msgstr "" #: management/kmwdriverselect.cpp:37 msgid "Driver Selection" msgstr "ਡਰਾਇਵਰ ਚੋਣ" #: management/kmwdriverselect.cpp:43 msgid "" "

Several drivers have been detected for this model. Select the driver you " "want to use. You will have the opportunity to test it as well as to change " "it if necessary.

" msgstr "" #: management/kmwdriverselect.cpp:46 msgid "Driver Information" msgstr "ਡਰਾਇਵਰ ਜਾਣਕਾਰੀ" #: management/kmwdriverselect.cpp:62 msgid "You must select a driver." msgstr "" #: management/kmwdriverselect.cpp:82 msgid " [recommended]" msgstr "" #: management/kmwdriverselect.cpp:113 msgid "No information about the selected driver." msgstr "" #: management/kmwdrivertest.cpp:41 msgid "Printer Test" msgstr "ਪਰਿੰਟਰ ਟੈਸਟ" #: management/kmwdrivertest.cpp:51 msgid "Manufacturer:" msgstr "ਨਿਰਮਾਤਾ:" #: management/kmwdrivertest.cpp:52 msgid "Model:" msgstr "" #: management/kmwdrivertest.cpp:53 msgid "Description:" msgstr "ਵੇਰਵਾ:" #: management/kmwdrivertest.cpp:55 msgid "&Test" msgstr "ਜਾਂਚ(&T)" #: management/kmwdrivertest.cpp:59 msgid "" "

Now you can test the printer before finishing installation. Use the " "Settings button to configure the printer driver and the Test " "button to test your configuration. Use the Back button to change the " "driver (your current configuration will be discarded).

" msgstr "" #: management/kmwdrivertest.cpp:117 msgid "Unable to load the requested driver:

%1

" msgstr "" #: management/kmwdrivertest.cpp:146 msgid "" "Test page successfully sent to printer. Wait until printing is complete, " "then click the OK button." msgstr "" #: management/kmwdrivertest.cpp:148 msgid "Unable to test printer: " msgstr "" #: management/kmwdrivertest.cpp:150 msgid "Unable to remove temporary printer." msgstr "" #: management/kmwdrivertest.cpp:153 msgid "Unable to create temporary printer." msgstr "" #: management/kmwend.cpp:33 msgid "Confirmation" msgstr "ਪੁਸ਼ਟੀ" #: management/kmwend.cpp:50 management/kmwend.cpp:106 management/kmwend.cpp:109 #: tdefilelist.cpp:102 msgid "Type" msgstr "ਕਿਸਮ" #: management/kmwend.cpp:52 msgid "Location" msgstr "ਸਥਿਤੀ" #: management/kmwend.cpp:53 management/kmwend.cpp:112 #: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545 msgid "Description" msgstr "ਵੇਰਵਾ" #: management/kmwend.cpp:69 msgid "Backend" msgstr "ਬੈਕ-ਐਂਡ" #: management/kmwend.cpp:74 msgid "Device" msgstr "ਜੰਤਰ" #: management/kmwend.cpp:77 msgid "Printer IP" msgstr "" #: management/kmwend.cpp:78 management/kmwend.cpp:89 msgid "Port" msgstr "ਪੋਰਟ" #: management/kmwend.cpp:81 management/kmwend.cpp:88 msgid "Host" msgstr "ਮੇਜ਼ਬਾਨ" #: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48 msgid "Queue" msgstr "ਕਤਾਰ" #: management/kmwend.cpp:91 msgid "Account" msgstr "ਖਾਤਾ" #: management/kmwend.cpp:96 msgid "URI" msgstr "URI" #: management/kmwend.cpp:109 msgid "DB driver" msgstr "DB ਡਰਾਇਵਰ" #: management/kmwend.cpp:109 msgid "External driver" msgstr "ਬਾਹਰੀ ਡਰਾਇਵਰ" #: management/kmwend.cpp:110 msgid "Manufacturer" msgstr "ਨਿਰਮਾਤਾ" #: management/kmwend.cpp:111 msgid "Model" msgstr "ਮਾਡਲ" #: management/kmwfile.cpp:35 msgid "File Selection" msgstr "ਫਾਇਲ ਚੋਣ" #: management/kmwfile.cpp:41 msgid "" "

The printing will be redirected to a file. Enter here the path of the " "file you want to use for redirection. Use an absolute path or the browse " "button for graphical selection.

" msgstr "" #: management/kmwfile.cpp:44 msgid "Print to file:" msgstr "ਛਾਪਣ ਲਈ ਫਾਈਲ:" #: management/kmwfile.cpp:66 msgid "Directory does not exist." msgstr "ਡਾਇਰੈਕਟਰੀ ਮੌਜੂਦ ਨਹੀਂ ਹੈ।" #: management/kmwinfopage.cpp:32 msgid "Introduction" msgstr "ਜਾਣ ਪਛਾਣ" #: management/kmwinfopage.cpp:37 msgid "" "

Welcome,


This wizard will help to install a new printer on your " "computer. It will guide you through the various steps of the process of " "installing and configuring a printer for your printing system. At each step, " "you can always go back using the Back button.


We hope you " "enjoy this tool!


" msgstr "" #: management/kmwizard.cpp:64 management/kmwizard.cpp:209 msgid "&Next >" msgstr "ਅੱਗੇ(&N) >" #: management/kmwizard.cpp:66 msgid "< &Back" msgstr "< ਪਿੱਛੇ(&B)" #: management/kmwizard.cpp:131 management/kmwizard.cpp:166 #: management/kmwizard.cpp:191 msgid "Add Printer Wizard" msgstr "" #: management/kmwizard.cpp:166 msgid "Modify Printer" msgstr "" #: management/kmwizard.cpp:191 msgid "Unable to find the requested page." msgstr "" #: management/kmwizard.cpp:207 management/kmwizard.cpp:234 msgid "&Finish" msgstr "ਸਮਾਪਤ(&F)" #: management/kmwlocal.cpp:38 msgid "Local Port Selection" msgstr "" #: management/kmwlocal.cpp:50 msgid "Local System" msgstr "" #: management/kmwlocal.cpp:57 msgid "Parallel" msgstr "ਸਮਾਂਤਰ" #: management/kmwlocal.cpp:58 msgid "Serial" msgstr "ਸੀਰੀਅਲ" #: management/kmwlocal.cpp:59 msgid "USB" msgstr "USB" #: management/kmwlocal.cpp:63 msgid "" "

Select a valid detected port, or enter directly the corresponding URI in " "the bottom edit field.

" msgstr "" #: management/kmwlocal.cpp:78 msgid "" "_: The URI is empty\n" "Empty URI." msgstr "" #: management/kmwlocal.cpp:83 msgid "The local URI doesn't correspond to a detected port. Continue?" msgstr "" #: management/kmwlocal.cpp:85 msgid "Select a valid port." msgstr "" #: management/kmwlocal.cpp:166 msgid "Unable to detect local ports." msgstr "" #: management/kmwlpd.cpp:41 msgid "LPD Queue Information" msgstr "" #: management/kmwlpd.cpp:44 msgid "" "

Enter the information concerning the remote LPD queue; this wizard will " "check it before continuing.

" msgstr "" #: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63 msgid "Queue:" msgstr "" #: management/kmwlpd.cpp:54 msgid "Some information is missing." msgstr "ਕੁਝ ਜਾਣਕਾਰੀ ਨਹੀਂ ਹੈ।" #: management/kmwlpd.cpp:61 msgid "Cannot find queue %1 on server %2; do you want to continue anyway?" msgstr "" #: management/kmwname.cpp:34 msgid "General Information" msgstr "ਸਧਾਰਨ ਜਾਣਕਾਰੀ" #: management/kmwname.cpp:37 msgid "" "

Enter the information concerning your printer or class. Name is " "mandatory, Location and Description are not (they may even not " "be used on some systems).

" msgstr "" #: management/kmwname.cpp:39 msgid "Name:" msgstr "ਨਾਂ:" #: management/kmwname.cpp:48 msgid "You must supply at least a name." msgstr "" #: management/kmwname.cpp:56 msgid "" "It is usually not a good idea to include spaces in printer name: it may " "prevent your printer from working correctly. The wizard can strip all spaces " "from the string you entered, resulting in %1; what do you want to do?" msgstr "" #: management/kmwname.cpp:62 msgid "Strip" msgstr "ਸਟਿਰਪ" #: management/kmwpassword.cpp:37 msgid "User Identification" msgstr "" #: management/kmwpassword.cpp:43 msgid "" "

This backend may require a login/password to work properly. Select the " "type of access to use and fill in the login and password entries if needed." msgstr "" #: management/kmwpassword.cpp:49 msgid "&Login:" msgstr "ਲਾਗਆਨ(&L):" #: management/kmwpassword.cpp:53 msgid "&Anonymous (no login/password)" msgstr "" #: management/kmwpassword.cpp:54 msgid "&Guest account (login=\"guest\")" msgstr "" #: management/kmwpassword.cpp:55 msgid "Nor&mal account" msgstr "" #: management/kmwpassword.cpp:88 msgid "Select one option" msgstr "" #: management/kmwpassword.cpp:90 msgid "User name is empty." msgstr "" #: management/kmwsmb.cpp:35 msgid "SMB Printer Settings" msgstr "SMB ਪਰਿੰਟਰ ਸਥਾਪਨ" #: management/kmwsmb.cpp:41 msgid "Scan" msgstr "ਜਾਂਚ" #: management/kmwsmb.cpp:42 msgid "Abort" msgstr "ਛੱਡੋ" #: management/kmwsmb.cpp:44 msgid "Workgroup:" msgstr "ਵਰਕਸਮੂਹ:" #: management/kmwsmb.cpp:45 msgid "Server:" msgstr "ਸਰਵਰ:" #: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99 msgid "Printer:" msgstr "ਪਰਿੰਟਰ:" #: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45 msgid "Empty printer name." msgstr "ਖਾਲੀ ਪਰਿੰਟਰ ਨਾਂ ਹੈ।" #: management/kmwsmb.cpp:99 #, c-format msgid "Login: %1" msgstr "ਲਾਗਇਨ: %1" #: management/kmwsmb.cpp:99 msgid "" msgstr "" #: management/kmwsocket.cpp:38 msgid "Network Printer Information" msgstr "" #: management/kmwsocket.cpp:48 msgid "&Printer address:" msgstr "" #: management/kmwsocket.cpp:49 msgid "P&ort:" msgstr "ਪੋਰਟ(&o):" #: management/kmwsocket.cpp:99 msgid "You must enter a printer address." msgstr "" #: management/kmwsocket.cpp:110 msgid "Wrong port number." msgstr "" #: management/kmwsocketutil.cpp:52 management/networkscanner.cpp:338 msgid "&Subnetwork:" msgstr "" #: management/kmwsocketutil.cpp:54 management/networkscanner.cpp:340 msgid "&Timeout (ms):" msgstr "" #: management/kmwsocketutil.cpp:92 management/networkscanner.cpp:378 msgid "Scan Configuration" msgstr "" #: management/kmwsocketutil.cpp:104 management/kmwsocketutil.cpp:110 #: management/networkscanner.cpp:390 management/networkscanner.cpp:396 msgid "Wrong subnetwork specification." msgstr "" #: management/kmwsocketutil.cpp:118 management/networkscanner.cpp:404 msgid "Wrong timeout specification." msgstr "" #: management/kmwsocketutil.cpp:121 management/networkscanner.cpp:407 msgid "Wrong port specification." msgstr "" #: management/kxmlcommanddlg.cpp:108 msgid "Integer" msgstr "ਪੂਰਨ ਅੰਕ" #: management/kxmlcommanddlg.cpp:109 msgid "Float" msgstr "ਤੈਰਦਾ" #: management/kxmlcommanddlg.cpp:110 msgid "List" msgstr "ਸੂਚੀ" #: management/kxmlcommanddlg.cpp:118 msgid "Default &value:" msgstr "" #: management/kxmlcommanddlg.cpp:119 msgid "Co&mmand:" msgstr "ਕਮਾਂਡ(&m):" #: management/kxmlcommanddlg.cpp:126 msgid "&Persistent option" msgstr "" #: management/kxmlcommanddlg.cpp:128 msgid "Va&lues" msgstr "ਮੁੱਲ(&l)" #: management/kxmlcommanddlg.cpp:136 msgid "Minimum v&alue:" msgstr "" #: management/kxmlcommanddlg.cpp:137 msgid "Ma&ximum value:" msgstr "" #: management/kxmlcommanddlg.cpp:150 msgid "Add value" msgstr "ਮੁੱਲ ਸ਼ਾਮਿਲ" #: management/kxmlcommanddlg.cpp:151 msgid "Delete value" msgstr "ਮੁੱਲ ਹਟਾਓ" #: management/kxmlcommanddlg.cpp:153 msgid "Apply changes" msgstr "ਤਬਦੀਲੀਆਂ ਲਾਗੂ" #: management/kxmlcommanddlg.cpp:154 msgid "Add group" msgstr "ਗਰੁੱਪ ਸ਼ਾਮਿਲ" #: management/kxmlcommanddlg.cpp:155 msgid "Add option" msgstr "ਚੋਣ ਸ਼ਾਮਿਲ" #: management/kxmlcommanddlg.cpp:156 msgid "Delete item" msgstr "ਇਕਾਈ ਹਟਾਓ" #: management/kxmlcommanddlg.cpp:157 tdefilelist.cpp:135 msgid "Move up" msgstr "ਉੱਪਰ ਭੇਜੋ" #: management/kxmlcommanddlg.cpp:158 tdefilelist.cpp:142 msgid "Move down" msgstr "ਹੇਠਾਂ ਭੇਜੋ" #: management/kxmlcommanddlg.cpp:162 msgid "&Input From" msgstr "" #: management/kxmlcommanddlg.cpp:163 msgid "O&utput To" msgstr "" #: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166 msgid "File:" msgstr "ਫਾਇਲ:" #: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167 msgid "Pipe:" msgstr "ਪਾਈਪ:" #: management/kxmlcommanddlg.cpp:285 msgid "" "An identification string. Use only alphanumeric characters except spaces. " "The string __root__ is reserved for internal use." msgstr "" #: management/kxmlcommanddlg.cpp:289 msgid "" "A description string. This string is shown in the interface, and should be " "explicit enough about the role of the corresponding option." msgstr "" #: management/kxmlcommanddlg.cpp:293 msgid "" "The type of the option. This determines how the option is presented " "graphically to the user." msgstr "" #: management/kxmlcommanddlg.cpp:297 msgid "" "The format of the option. This determines how the option is formatted for " "inclusion in the global command line. The tag %value can be used to " "represent the user selection. This tag will be replaced at run-time by a " "string representation of the option value." msgstr "" #: management/kxmlcommanddlg.cpp:303 msgid "" "The default value of the option. For non persistent options, nothing is " "added to the command line if the option has that default value. If this " "value does not correspond to the actual default value of the underlying " "utility, make the option persistent to avoid unwanted effects." msgstr "" #: management/kxmlcommanddlg.cpp:309 msgid "" "Make the option persistent. A persistent option is always written to the " "command line, whatever its value. This is useful when the chosen default " "value does not match with the actual default value of the underlying utility." msgstr "" #: management/kxmlcommanddlg.cpp:313 #, c-format msgid "" "The full command line to execute the associated underlying utility. This " "command line is based on a mechanism of tags that are replaced at run-time. " "The supported tags are:

  • %filterargs: command options
  • %filterinput: input specification
  • %filteroutput: output specification
  • %psu: the page size in upper case
  • %psl: the page size in lower case
" msgstr "" #: management/kxmlcommanddlg.cpp:323 #, c-format msgid "" "Input specification when the underlying utility reads input data from a " "file. Use the tag %in to represent the input filename." msgstr "" #: management/kxmlcommanddlg.cpp:327 #, c-format msgid "" "Output specification when the underlying utility writes output data to a " "file. Use the tag %out to represent the output filename." msgstr "" #: management/kxmlcommanddlg.cpp:331 msgid "" "Input specification when the underlying utility reads input data from its " "standard input." msgstr "" #: management/kxmlcommanddlg.cpp:335 msgid "" "Output specification when the underlying utility writes output data to its " "standard output." msgstr "" #: management/kxmlcommanddlg.cpp:339 msgid "" "A comment about the underlying utility, which can be viewed by the user from " "the interface. This comment string supports basic HTML tags like <a>, " "<b> or <i>." msgstr "" #: management/kxmlcommanddlg.cpp:568 msgid "" "Invalid identification name. Empty strings and \"__root__\" are not allowed." msgstr "" #: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652 msgid "New Group" msgstr "ਨਵਾਂ ਗਰੁੱਪ" #: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671 msgid "New Option" msgstr "ਨਵੀਂ ਚੋਣ" #: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939 #, c-format msgid "Command Edit for %1" msgstr "%1 ਲਈ ਕਮਾਂਡ ਸੋਧ" #: management/kxmlcommanddlg.cpp:833 msgid "&Mime Type Settings" msgstr "" #: management/kxmlcommanddlg.cpp:839 msgid "Supported &Input Formats" msgstr "" #: management/kxmlcommanddlg.cpp:851 msgid "&Edit Command..." msgstr "" #: management/kxmlcommanddlg.cpp:868 msgid "Output &format:" msgstr "ਆਉਟਪੁੱਟ ਫਾਰਮੈਟ(&f):" #: management/kxmlcommanddlg.cpp:870 msgid "ID name:" msgstr "ID ਨਾਂ:" #: management/kxmlcommanddlg.cpp:1033 msgid "exec:/" msgstr "exec:/" #: management/kxmlcommandselector.cpp:54 msgid "New command" msgstr "ਨਵੀਂ ਕਮਾਂਡ" #: management/kxmlcommandselector.cpp:55 msgid "Edit command" msgstr "ਕਮਾਂਡ ਸੋਧ" #: management/kxmlcommandselector.cpp:72 msgid "&Browse..." msgstr "ਝਲਕ(&B)..." #: management/kxmlcommandselector.cpp:73 msgid "Use co&mmand:" msgstr "" #: management/kxmlcommandselector.cpp:174 msgid "Command Name" msgstr "ਕਮਾਂਡ ਨਾਂ" #: management/kxmlcommandselector.cpp:174 msgid "Enter an identification name for the new command:" msgstr "" #: management/kxmlcommandselector.cpp:183 msgid "" "A command named %1 already exists. Do you want to continue and edit the " "existing one?" msgstr "" #: management/kxmlcommandselector.cpp:220 msgid "Internal error. The XML driver for the command %1 could not be found." msgstr "" #: management/kxmlcommandselector.cpp:238 msgid "output" msgstr "ਆਉਟਪੁੱਟ" #: management/kxmlcommandselector.cpp:242 msgid "undefined" msgstr "" #: management/kxmlcommandselector.cpp:247 msgid "not allowed" msgstr "ਮਨਜ਼ੂਰ ਨਹੀਂ" #: management/kxmlcommandselector.cpp:253 msgid "(Unavailable: requirements not satisfied)" msgstr "" #: management/networkscanner.cpp:104 management/networkscanner.cpp:184 msgid "Sc&an" msgstr "" #: management/networkscanner.cpp:111 msgid "Network scan:" msgstr "" #: management/networkscanner.cpp:112 management/networkscanner.cpp:299 #: management/networkscanner.cpp:310 #, c-format msgid "Subnet: %1" msgstr "" #: management/networkscanner.cpp:161 msgid "" "You are about to scan a subnet (%1.*) that does not correspond to the " "current subnet of this computer (%2.*). Do you want to scan the specified " "subnet anyway?" msgstr "" #: management/networkscanner.cpp:164 msgid "&Scan" msgstr "ਜਾਂਚ(&S)" #: management/smbview.cpp:44 msgid "Comment" msgstr "ਟਿੱਪਣੀ" #: management/tdeprint_management_module.cpp:48 msgid "Select Command" msgstr "" #: marginpreview.cpp:135 msgid "No preview available" msgstr "ਕੋਈ ਝਲਕ ਨਹੀਂ ਹੈ" #: marginwidget.cpp:37 msgid "" "

Top Margin

.

This spinbox/text edit field lets you " "control the top margin of your printout if the printing application does " "not define its margins internally.

The setting works for instance " "for ASCII text file printing, or for printing from KMail and and " "Konqueror..

Note:

This margin setting is not intended for " "KOffice or OpenOffice.org printing, because these applications (or rather " "their users) are expected to do it by themselves. It also does not work for " "PostScript or PDF file, which in most cases have their margins hardcoded " "internally.



Additional hint for power users: " "This TDEPrint GUI element matches with the CUPS commandline job option " "parameter:

    -o page-top=...      # use values from \"0\" or "
"higher. \"72\" is equal to 1 inch.  

" msgstr "" #: marginwidget.cpp:57 msgid "" "

Bottom Margin

.

This spinbox/text edit field lets " "you control the bottom margin of your printout if the printing application " "does not define its margins internally.

The setting works for " "instance for ASCII text file printing, or for printing from KMail and and " "Konqueror.

Note:

This margin setting is not intended for " "KOffice or OpenOffice.org printing, because these applications (or rather " "their users) are expected to do it by themselves. It also does not work for " "PostScript or PDF file, which in most cases have their margins hardcoded " "internally.



Additional hint for power users: " "This TDEPrint GUI element matches with the CUPS commandline job option " "parameter:

    -o page-bottom=...      # use values from \"0\" or "
"higher. \"72\" is equal to 1 inch.  
" msgstr "" #: marginwidget.cpp:76 msgid "" "

Left Margin

.

This spinbox/text edit field lets you " "control the left margin of your printout if the printing application does " "not define its margins internally.

The setting works for instance " "for ASCII text file printing, or for printing from KMail and and Konqueror. " "

Note:

This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript " "or PDF file, which in most cases have their margins hardcoded internally.

Additional hint for power users: This TDEPrint " "GUI element matches with the CUPS commandline job option parameter: " "

    -o page-left=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.  
" msgstr "" #: marginwidget.cpp:95 msgid "" "

Right Margin

.

This spinbox/text edit field lets you " "control the right margin of your printout if the printing application does " "not define its margins internally.

The setting works for instance " "for ASCII text file printing, or for printing from KMail and and Konqueror. " "

Note:

This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript " "or PDF file, which in most cases have their margins hardcoded internally.

Additional hint for power users: This TDEPrint " "GUI element matches with the CUPS commandline job option parameter: " "

    -o page-right=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.  
" msgstr "" #: marginwidget.cpp:114 msgid "" "

Change Measurement Unit

.

You can change the units of " "measurement for the page margins here. Select from Millimeter, Centimeter, " "Inch or Pixels (1 pixel == 1/72 inch).

" msgstr "" #: marginwidget.cpp:121 msgid "" "

Custom Margins Checkbox

.

Enable this checkbox if " "you want to modify the margins of your printouts

You can change margin " "settings in 4 ways:

  • Edit the text fields.
  • Click " "spinbox arrows.
  • Scroll wheel of wheelmouses.
  • Drag " "margins in preview frame with mouse.
Note: The margin " "setting does not work if you load such files directly into kprinter, which " "have their print margins hardcoded internally, like as most PDF or " "PostScript files. It works for all ASCII text files however. It also may " "not work with non-TDE applications which fail to fully utilize the " "TDEPrint framework, such as OpenOffice.org.

" msgstr "" #: marginwidget.cpp:138 msgid "" "

\"Drag-your-Margins\"

.

Use your mouse to drag and set " "each margin on this little preview window.

" msgstr "" #: marginwidget.cpp:148 msgid "&Use custom margins" msgstr "" #: marginwidget.cpp:158 msgid "&Top:" msgstr "ਉੱਪਰ(&T):" #: marginwidget.cpp:159 msgid "&Bottom:" msgstr "ਹੇਠਾਂ(&B):" #: marginwidget.cpp:160 msgid "Le&ft:" msgstr "ਖੱਬਾ(&f):" #: marginwidget.cpp:161 msgid "&Right:" msgstr "ਸੱਜਾ(&R):" #: marginwidget.cpp:164 msgid "Pixels (1/72nd in)" msgstr "ਪਿਕਸਲ (1/72 ਇੰਚ)" #: marginwidget.cpp:167 msgid "Inches (in)" msgstr "ਇੰਚ (in)" #: marginwidget.cpp:168 msgid "Centimeters (cm)" msgstr "ਸੈਂਟੀਮੀਟਰ (cm)" #: marginwidget.cpp:169 msgid "Millimeters (mm)" msgstr "ਮਿਲੀਮੀਟਰ (mm)" #: plugincombobox.cpp:33 msgid "" " Print Subsystem Selection

This combo box shows (and lets you " "select) a print subsystem to be used by TDEPrint. (This print subsystem " "must, of course, be installed inside your Operating System.) TDEPrint " "usually auto-detects the correct print subsystem by itself upon first " "startup. Most Linux distributions have \"CUPS\", the Common UNIX " "Printing System. " msgstr "" #: plugincombobox.cpp:45 msgid "Print s&ystem currently used:" msgstr "ਇਸ ਵੇਲੇ ਪਰਿੰਟ ਸਿਸਟਮ ਵਰਤਦਾ ਹੈ(&y):" #: plugincombobox.cpp:91 msgid "" " Current Connection

This line shows which CUPS server your PC " "is currently connected to for printing and retrieving printer info. To " "switch to a different CUPS server, click \"System Options\", then select " "\"Cups server\" and fill in the required info. " msgstr "" #: posterpreview.cpp:115 msgid "" "Poster preview not available. Either the poster executable is not " "properly installed, or you don't have the required version" msgstr "" #: ppdloader.cpp:232 msgid "(line %1): " msgstr "" #: rlpr/kmconfigproxy.cpp:29 msgid "Proxy" msgstr "ਪਰਾਕਸੀ" #: rlpr/kmconfigproxy.cpp:30 msgid "RLPR Proxy Server Settings" msgstr "" #: rlpr/kmproprlpr.cpp:49 rlpr/kmwrlpr.cpp:50 msgid "Remote LPD Queue Settings" msgstr "" #: rlpr/kmproxywidget.cpp:32 msgid "Proxy Settings" msgstr "ਪਰਾਕਸੀ ਸਥਾਪਨ" #: rlpr/kmproxywidget.cpp:36 msgid "&Use proxy server" msgstr "ਪਰਾਕਸੀ ਸਰਵਰ ਵਰਤੋਂ(&U)" #: rlpr/kmrlprmanager.cpp:47 rlpr/kmwrlpr.cpp:85 msgid "Empty host name." msgstr "" #: rlpr/kmrlprmanager.cpp:49 rlpr/kmwrlpr.cpp:87 msgid "Empty queue name." msgstr "" #: rlpr/kmrlprmanager.cpp:63 msgid "Printer not found." msgstr "ਪਰਿੰਟਰ ਨਹੀਂ ਲੱਭਾ ਹੈ।" #: rlpr/kmrlprmanager.cpp:75 msgid "Not implemented yet." msgstr "ਹਾਲੇ ਸਥਾਪਤ ਨਹੀਂ ਹੈ।" #: rlpr/kmwrlpr.cpp:124 msgid "Remote queue %1 on %2" msgstr "%2 ਤੇ ਰਿਮੋਟ ਕਤਾਰ %1" #: rlpr/kmwrlpr.cpp:199 msgid "No Predefined Printers" msgstr "" #: rlpr/krlprprinterimpl.cpp:73 msgid "The printer is incompletely defined. Try to reinstall it." msgstr "" #: tdefilelist.cpp:42 msgid "" " Add File button

This button calls the 'File Open' " "dialog to let you select a file for printing. Note, that

  • you can " "select ASCII or International Text, PDF, PostScript, JPEG, TIFF, PNG, GIF " "and many other graphic formats.
  • you can select various files from " "different paths and send them as one \"multi-file job\" to the printing " "system.
" msgstr "" #: tdefilelist.cpp:54 msgid "" " Remove File button

This button removes the highlighted file " "from the list of to-be-printed files. " msgstr "" #: tdefilelist.cpp:59 msgid "" " Move File Up button

This button moves the highlighted file " "up in the list of files to be printed.

In effect, this changes the " "order of the files' printout.

" msgstr "" #: tdefilelist.cpp:66 msgid "" " Move File Down button

This button moves the highlighted file " "down in the list of files to be printed.

In effect, this changes the " "order of the files' printout.

" msgstr "" #: tdefilelist.cpp:73 msgid "" " File Open button

This button tries to open the highlighted " "file, so you can view or edit it before you send it to the printing system.

If you open files, TDEPrint will use the application matching the MIME " "type of the file.

" msgstr "" #: tdefilelist.cpp:82 msgid "" " File List view

This list displays all the files you selected " "for printing. You can see the file name(s), file path(s) and the file (MIME) " "type(s) as determined by TDEPrint. You may re-arrange the initial order of " "the list with the help of the arrow buttons on the right.

The files " "will be printed as a single job, in the same order as displayed in the list." "

Note: You can select multiple files. The files may be in " "multiple locations. The files may be of multiple MIME types. The buttons on " "the right side let you add more files, remove already selected files from " "the list, re-order the list (by moving files up or down), and open files. " "If you open files, TDEPrint will use the application matching the MIME type " "of the file.

" msgstr "" #: tdefilelist.cpp:103 msgid "Path" msgstr "ਰਸਤਾ" #: tdefilelist.cpp:115 msgid "Add file" msgstr "ਫਾਇਲ ਸ਼ਾਮਿਲ" #: tdefilelist.cpp:121 msgid "Remove file" msgstr "ਫਾਇਲ ਹਟਾਓ" #: tdefilelist.cpp:128 msgid "Open file" msgstr "ਫਾਇਲ ਖੋਲ੍ਹੋ" #: tdefilelist.cpp:149 msgid "" "Drag file(s) here or use the button to open a file dialog. Leave empty for " "<STDIN>." msgstr "" #: tdeprintd.cpp:176 msgid "" "Some of the files to print are not readable by the TDE print daemon. This " "may happen if you are trying to print as a different user to the one " "currently logged in. To continue printing, you need to provide root's " "password." msgstr "" #: tdeprintd.cpp:181 msgid "Provide root's Password" msgstr "" #: tdeprintd.cpp:200 tdeprintd.cpp:202 #, c-format msgid "Printing Status - %1" msgstr "" #: tdeprintd.cpp:263 msgid "Printing system" msgstr "" #: tdeprintd.cpp:266 msgid "Authentication failed (user name=%1)" msgstr "" #: tools/escputil/escpwidget.cpp:45 msgid "EPSON InkJet Printer Utilities" msgstr "" #: tools/escputil/escpwidget.cpp:91 msgid "&Use direct connection (might need root permissions)" msgstr "" #: tools/escputil/escpwidget.cpp:103 msgid "Clea&n print head" msgstr "" #: tools/escputil/escpwidget.cpp:104 msgid "&Print a nozzle test pattern" msgstr "" #: tools/escputil/escpwidget.cpp:105 msgid "&Align print head" msgstr "" #: tools/escputil/escpwidget.cpp:106 msgid "&Ink level" msgstr "ਸਿਆਹੀ ਪੱਧਰ(&I)" #: tools/escputil/escpwidget.cpp:107 msgid "P&rinter identification" msgstr "ਪਰਿੰਟਰ ਪਛਾਣ(&r)" #: tools/escputil/escpwidget.cpp:153 msgid "Internal error: no device set." msgstr "ਅੰਦਰੂਨੀ ਗਲਤੀ: ਕੋਈ ਜੰਤਰ ਨਿਰਧਾਰਿਤ ਨਹੀਂ ਹੈ।" #: tools/escputil/escpwidget.cpp:164 #, c-format msgid "Unsupported connection type: %1" msgstr "ਨਾ ਸਹਾਇਕ ਕੁਨੈਕਸ਼ਨ ਕਿਸਮ: %1" #: tools/escputil/escpwidget.cpp:171 msgid "" "An escputil process is still running. You must wait until its completion " "before continuing." msgstr "" #: tools/escputil/escpwidget.cpp:179 msgid "" "The executable escputil cannot be found in your PATH environment variable. " "Make sure gimp-print is installed and that escputil is in your PATH." msgstr "" #: tools/escputil/escpwidget.cpp:204 msgid "Internal error: unable to start escputil process." msgstr "" #: tools/escputil/escpwidget.cpp:214 msgid "Operation terminated with errors." msgstr "ਗਲਤੀਆਂ ਨਾਲ ਕਾਰਵਾਈ ਬੰਦ ਹੋਈ।" #: util.h:64 #, fuzzy msgid "Envelope C5" msgstr "US #10 ਲਿਫਾਫਾ" #: util.h:65 #, fuzzy msgid "Envelope DL" msgstr "US #10 ਲਿਫਾਫਾ" #: util.h:66 msgid "Envelope US #10" msgstr "" #: util.h:67 msgid "Executive" msgstr "" #: kprintpreviewui.rc:13 #, no-c-format msgid "&PageMarks" msgstr "" #, fuzzy #~ msgid "Orientation" #~ msgstr "ਸਥਿਤੀ(&O)" #, fuzzy #~ msgid "Print" #~ msgstr "ਛਾਪੋ(&P)" #, fuzzy #~ msgid "Cancel" #~ msgstr "ਰੱਦ ਕੀਤਾ" #, fuzzy #~ msgid "Fonts" #~ msgstr "ਫੋਂਟ ਮਾਰਗ" #, fuzzy #~ msgid "&Remove" #~ msgstr "ਹਟਾਓ(&v)" #, fuzzy #~ msgid "Configure" #~ msgstr "ਸੰਰਚਨਾ %1" #, fuzzy #~ msgid "Remove" #~ msgstr "ਹਟਾਓ(&v)" #, fuzzy #~ msgid "Show &Toolbar" #~ msgstr "ਮੇਨੂ ਸੰਦ-ਪੱਟੀ ਵੇਖਾਓ(&n)" #, fuzzy #~ msgid "Add" #~ msgstr "ਸ਼ਾਮਿਲ(&A)" #, fuzzy #~ msgid "Information" #~ msgstr "ਪੁਸ਼ਟੀ" #, fuzzy #~ msgid "Properties" #~ msgstr "ਵਿਸ਼ੇਸਤਾ(&r)" #, fuzzy #~ msgid "&Settings" #~ msgstr "ਸਥਾਪਨ" #, fuzzy #~ msgid "File" #~ msgstr "ਫਾਇਲ:" #, fuzzy #~ msgid "&File" #~ msgstr "ਫਾਇਲਾਂ(&F)" #~ msgid "%1 &Handbook" #~ msgstr "%1 ਹੱਥਲੀ(&H)" #~ msgid "%1 &Web Site" #~ msgstr "%1 ਵੈੱਬ ਸਾਇਟ(&W)" #~ msgid "Documentation" #~ msgstr "ਦਸਤਾਵੇਜ਼"