# translation of tdecachegrind.po to Serbian # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # Slobodan Simic , 2003. # Chusslove Illich , 2003, 2004, 2005, 2006. msgid "" msgstr "" "Project-Id-Version: tdecachegrind\n" "POT-Creation-Date: 2018-12-31 18:49+0100\n" "PO-Revision-Date: 2006-01-08 15:42+0100\n" "Last-Translator: Chusslove Illich \n" "Language-Team: Serbian \n" "Language: sr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11\n" #: _translatorinfo:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "Slobodan Simić,Časlav Ilić" #: _translatorinfo:2 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "slsimic@verat.net,caslav.ilic@gmx.net" #: cachegrindloader.cpp:141 msgid "Import filter for Cachegrind/Callgrind generated profile data files" msgstr "" "Uvozni filter za fajlove sa profilišućim podacima generisane Cachegrind-om/" "Callgrind-om" #: cachegrindloader.cpp:738 #, c-format msgid "Loading %1" msgstr "Učitavam %1" #: callgraphview.cpp:306 #, c-format msgid "Call(s) from %1" msgstr "Pozivi od %1" #: callgraphview.cpp:307 #, c-format msgid "Call(s) to %1" msgstr "Pozivi za %1" #: callgraphview.cpp:308 msgid "(unknown call)" msgstr "(nepoznat poziv)" #: callgraphview.cpp:1425 msgid "" "Call Graph around active Function

Depending on configuration, this " "view shows the call graph environment of the active function. Note: the " "shown cost is only the cost which is spent while the active function " "was actually running; i.e. the cost shown for main() - if it's visible - " "should be the same as the cost of the active function, as that's the part of " "inclusive cost of main() spent while the active function was running.

For cycles, blue call arrows indicate that this is an artificial call " "added for correct drawing which actually never happened.

If the graph " "is larger than the widget area, an overview panner is shown in one edge. " "There are similar visualization options to the Call Treemap; the selected " "function is highlighted.

" msgstr "" "Grafikon poziva oko aktivne funkcije

U zavisnosti od podešavanja, " "ovaj prikaz pokazuje okruženje grafikona poziva aktivne funkcije. Napomena: " "prikazani trošak je samo trošak nastao dok je aktivna funkcija " "radila; tj. trošak prikazan za main() — ako je vidljiva — bi trebalo da bude " "isti kao trošak aktivne funkcije, pošto je to deo inkluzivnog troška od " "main() dok je aktivna funkcija radila.

Za cikluse, plave strelice " "poziva ukazuju da je to veštački poziv, dodat radi ispravnog iscrtavanja, " "koji se nije stvarno desio.

Ako je grafikon veći od oblasti kontrole, " "u jednom kraju će biti prikazan pomerač pregleda. Postoje opcije " "vizuelizacije slične onima u mapi stabla poziva; izabrana funkcija je " "istaknuta.

" #: callgraphview.cpp:1789 msgid "" "Warning: a long lasting graph layouting is in progress.\n" "Reduce node/edge limits for speedup.\n" msgstr "" "Upozorenje: Raspoređivanje grafikona u toku dugo traje.\n" "Smanjite ograničenja čvorova/ivica radi ubrzanja.\n" #: callgraphview.cpp:1792 msgid "Layouting stopped.\n" msgstr "Raspoređivanje je zaustavljeno.\n" #: callgraphview.cpp:1794 msgid "The call graph has %1 nodes and %2 edges.\n" msgstr "Grafikon poziva ima %1 čvorova i %2 ivica.\n" #: callgraphview.cpp:1827 msgid "No item activated for which to draw the call graph." msgstr "Nema aktivirane stavke za koju bi se iscrtao grafikon poziva." #: callgraphview.cpp:1838 msgid "No call graph can be drawn for the active item." msgstr "Grafikon poziva se ne može iscrtati za aktivnu stavku." #: callgraphview.cpp:1867 msgid "" "No call graph is available because the following\n" "command cannot be run:\n" "'%1'\n" msgstr "" "Grafikon poziva nije dostupan jer se sledeća\n" "naredba ne može pokrenuti:\n" "„%1“\n" #: callgraphview.cpp:1870 callgraphview.cpp:2199 msgid "Please check that 'dot' is installed (package GraphViz)." msgstr "Uverite se da je „dot“ instalirana (paket GraphViz)." #: callgraphview.cpp:2198 msgid "Error running the graph layouting tool.\n" msgstr "Greška pri izvršavanju alata za raspoređivanje grafikona.\n" #: callgraphview.cpp:2206 msgid "" "There is no call graph available for function\n" "\t'%1'\n" "because it has no cost of the selected event type." msgstr "" "Grafikon poziva nije dostupan za funkcijku\n" "\t„%1“\n" "zato što nema trošak izabranog tipa događaja." #: callgraphview.cpp:2396 callgraphview.cpp:2400 callgraphview.cpp:2418 #: callview.cpp:123 callview.cpp:128 coverageview.cpp:166 instrview.cpp:191 #: sourceview.cpp:116 msgid "Go to '%1'" msgstr "Idi do „%1“" #: callgraphview.cpp:2427 msgid "Stop Layouting" msgstr "Zaustavi raspoređivanje" #: callgraphview.cpp:2435 msgid "As PostScript" msgstr "Kao PostScript" #: callgraphview.cpp:2436 msgid "As Image ..." msgstr "Kao slika..." #: callgraphview.cpp:2438 msgid "Export Graph" msgstr "Izvezi grafikon" #: callgraphview.cpp:2443 callgraphview.cpp:2466 msgid "Unlimited" msgstr "Neograničeno" #: callgraphview.cpp:2446 callgraphview.cpp:2469 msgid "None" msgstr "Nijedan" #: callgraphview.cpp:2447 callgraphview.cpp:2470 msgid "max. 2" msgstr "maks. 2" #: callgraphview.cpp:2448 callgraphview.cpp:2471 msgid "max. 5" msgstr "maks. 5" #: callgraphview.cpp:2449 callgraphview.cpp:2472 msgid "max. 10" msgstr "maks. 10" #: callgraphview.cpp:2450 callgraphview.cpp:2473 msgid "max. 15" msgstr "maks. 15" #: callgraphview.cpp:2460 callgraphview.cpp:2483 #, c-format msgid "< %1" msgstr "< %1" #: callgraphview.cpp:2489 msgid "No Minimum" msgstr "Nema minimuma" #: callgraphview.cpp:2493 #, c-format msgid "50 %" msgstr "50 %" #: callgraphview.cpp:2494 #, c-format msgid "20 %" msgstr "20 %" #: callgraphview.cpp:2495 #, c-format msgid "10 %" msgstr "10 %" #: callgraphview.cpp:2496 #, c-format msgid "5 %" msgstr "5 %" #: callgraphview.cpp:2497 #, c-format msgid "3 %" msgstr "3 %" #: callgraphview.cpp:2498 #, c-format msgid "2 %" msgstr "2 %" #: callgraphview.cpp:2499 #, c-format msgid "1.5 %" msgstr "1.5 %" #: callgraphview.cpp:2500 #, c-format msgid "1 %" msgstr "1 %" #: callgraphview.cpp:2516 msgid "Same as Node" msgstr "Isto kao čvor" #: callgraphview.cpp:2517 #, c-format msgid "50 % of Node" msgstr "50% od čvora" #: callgraphview.cpp:2518 #, c-format msgid "20 % of Node" msgstr "20% od čvora" #: callgraphview.cpp:2519 #, c-format msgid "10 % of Node" msgstr "10% od čvora" #: callgraphview.cpp:2529 msgid "Caller Depth" msgstr "Dubina pozivača" #: callgraphview.cpp:2530 msgid "Callee Depth" msgstr "Dubina pozvanog" #: callgraphview.cpp:2531 msgid "Min. Node Cost" msgstr "Min. trošak čvora" #: callgraphview.cpp:2532 msgid "Min. Call Cost" msgstr "Min. trošak poziva" #: callgraphview.cpp:2534 msgid "Arrows for Skipped Calls" msgstr "Strelice za preskočene pozive" #: callgraphview.cpp:2536 msgid "Inner-cycle Calls" msgstr "Pozivi unutrašnjeg ciklusa" #: callgraphview.cpp:2538 msgid "Cluster Groups" msgstr "Zbij grupe" #: callgraphview.cpp:2543 msgid "Compact" msgstr "Kompaktno" #: callgraphview.cpp:2544 msgid "Normal" msgstr "Normalno" #: callgraphview.cpp:2545 msgid "Tall" msgstr "Visoko" #: callgraphview.cpp:2550 msgid "Top to Down" msgstr "Odozgo na dole" #: callgraphview.cpp:2551 msgid "Left to Right" msgstr "S leva na desno" #: callgraphview.cpp:2552 msgid "Circular" msgstr "Kružno" #: callgraphview.cpp:2558 msgid "TopLeft" msgstr "Gore levo" #: callgraphview.cpp:2559 msgid "TopRight" msgstr "Gore desno" #: callgraphview.cpp:2560 msgid "BottomLeft" msgstr "Dole levo" #: callgraphview.cpp:2561 msgid "BottomRight" msgstr "Dole desno" #: callgraphview.cpp:2562 configdlgbase.ui:246 configdlgbase.ui:286 #: configdlgbase.ui:302 #, no-c-format msgid "Automatic" msgstr "Automatsko" #: callgraphview.cpp:2569 msgid "Graph" msgstr "Grafikon" #: callgraphview.cpp:2570 partselection.cpp:320 msgid "Visualization" msgstr "Vizuelizacija" #: callgraphview.cpp:2571 msgid "Birds-eye View" msgstr "Ptičja perspektiva" #: callitem.cpp:82 partlistitem.cpp:152 msgid "(active)" msgstr "(aktivno)" #: callmapview.cpp:59 dumpselectionbase.ui:550 partselection.cpp:58 #, no-c-format msgid "Name" msgstr "Ime" #: callmapview.cpp:60 callview.cpp:44 instrview.cpp:126 partselection.cpp:59 #: sourceview.cpp:51 stackselectionbase.ui:31 #, no-c-format msgid "Cost" msgstr "Trošak" #: callmapview.cpp:61 dumpselectionbase.ui:950 functionselectionbase.ui:147 #, no-c-format msgid "Location" msgstr "Lokacija" #: callmapview.cpp:63 dumpselectionbase.ui:754 stackselectionbase.ui:53 #, no-c-format msgid "Calls" msgstr "Pozivi" #: callmapview.cpp:98 msgid "" "Caller Map

This graph shows the nested hierarchy of all callers of " "the current activated function. Each colored rectangle represents a " "function; its size tries to be proportional to the cost spent therein while " "the active function is running (however, there are drawing constrains).

" msgstr "" "Mapa pozivača

Ovaj grafikon prikazuje ugnježdenu hijerarhiju svih " "pozivača trenutno aktivirane funkcije. Svaki obojeni pravougaonik " "predstavlja funkciju; njegova veličina pokušava da bude proporcionalna " "trošku te funkcije dok se aktivna funkcija izvršava (međutim, postoje " "ograničenja iscrtavanja).

" #: callmapview.cpp:105 msgid "" "Call Map

This graph shows the nested hierarchy of all callees of " "the current activated function. Each colored rectangle represents a " "function; its size tries to be proportional to the cost spent therein while " "the active function is running (however, there are drawing constrains).

" msgstr "" "Mapa poziva

Ovaj grafikon prikazuje ugnježdenu hijerarhiju svih " "pozvanih funkcija iz trenutno aktivirane funkcije. Svaki obojeni " "pravougaonik predstavlja funkciju; njegova veličina pokušava da bude " "proporcionalna trošku te funkcije dok se aktivna funkcija izvršava (međutim, " "postoje ograničenja iscrtavanja).

" #: callmapview.cpp:113 msgid "" "

Appearance options can be found in the in the context menu. To get exact " "size proportions, choose 'Hide incorrect borders'. As this mode can be " "very time consuming, you may want to limit the maximum drawn " "nesting level before. 'Best' determinates the split direction for children " "from the aspect ratio of the parent. 'Always Best' decides on remaining " "space for each sibling. 'Ignore Proportions' takes space for function name " "drawing before drawing children. Note that size proportions can get " "heavily wrong.

This is a TreeMap widget. Keyboard " "navigation is available with the left/right arrow keys for traversing " "siblings, and up/down arrow keys to go a nesting level up/down. Return activates the current item.

" msgstr "" "

Opcije izgleda mogu se naći u kontekstnom meniju. Da biste dobili tačne " "proporcije veličina, izaberite „Sakrij netačne ivice“. Pošto ovaj režim može " "oduzimati dosta vremena, možda ćete želeti da ograničite maksimalni " "nivo ugnježdenog iscrtavanja. „Najbolje“ određuje smer razdvajanja za decu " "od vitkosti roditelja. „Uvek najbolje“ odlučuje o preostalom prostoru za " "svakog srodnika. „Ignoriši proporcije“ zauzima prostor za iscrtavanje imena " "funkcija pre iscrtavanja dece. Imajte u vidu da proporcije veličine " "mogu biti jako pogrešne.

Ovo je kontrola TreeMap. " "Navigacija tastaturom je dostupna preko leve/desne strelice za srodnike, a " "strelica gore/dole za ugnježdene nivoe. Taster Return aktivira " "tekuću stavku.

" #: callmapview.cpp:167 msgid "Go To" msgstr "Idi na" #: callmapview.cpp:184 msgid "Stop at Depth" msgstr "Stani na dubini" #: callmapview.cpp:187 treemap.cpp:3101 msgid "No Depth Limit" msgstr "Nema granice dubine" #: callmapview.cpp:190 msgid "Depth 10" msgstr "Dubina 10" #: callmapview.cpp:192 msgid "Depth 15" msgstr "Dubina 15" #: callmapview.cpp:194 msgid "Depth 20" msgstr "Dubina 20" #: callmapview.cpp:198 treemap.cpp:3107 msgid "Depth of '%1' (%2)" msgstr "Dubina od „%1“ (%2)" #: callmapview.cpp:204 msgid "Decrement Depth (to %1)" msgstr "Umanjenje dubine (do %1)" #: callmapview.cpp:205 msgid "Increment Depth (to %1)" msgstr "Povećanje dubine (do %1)" #: callmapview.cpp:209 msgid "Stop at Function" msgstr "Zaustavi na funkciji" #: callmapview.cpp:210 msgid "No Function Limit" msgstr "Bez ograničenja funkcija" #: callmapview.cpp:240 msgid "Stop at Area" msgstr "Stani na oblasti" #: callmapview.cpp:243 treemap.cpp:3039 msgid "No Area Limit" msgstr "Nema granice oblasti" #: callmapview.cpp:246 msgid "50 Pixels" msgstr "50 piksela" #: callmapview.cpp:248 msgid "100 Pixels" msgstr "100 piksela" #: callmapview.cpp:250 msgid "200 Pixels" msgstr "200 piksela" #: callmapview.cpp:252 msgid "500 Pixels" msgstr "500 piksela" #: callmapview.cpp:258 treemap.cpp:3045 msgid "Area of '%1' (%2)" msgstr "Oblast od „%1“ (%2)" #: callmapview.cpp:264 treemap.cpp:3071 msgid "Double Area Limit (to %1)" msgstr "Udvostruči ograničenje oblasti (na %1)" #: callmapview.cpp:266 msgid "Half Area Limit (to %1)" msgstr "Ograničenje poluoblasti (do %1)" #: callmapview.cpp:273 msgid "Visualisation" msgstr "Vizuelizacija" #: callmapview.cpp:277 msgid "Split Direction" msgstr "Smer razdvajanja" #: callmapview.cpp:279 msgid "Skip Incorrect Borders" msgstr "Preskoči netačne ivice" #: callmapview.cpp:284 msgid "Border Width" msgstr "Širina ivice" #: callmapview.cpp:285 msgid "Border 0" msgstr "Ivica 0" #: callmapview.cpp:288 msgid "Border 1" msgstr "Ivica 1" #: callmapview.cpp:290 msgid "Border 2" msgstr "Ivica 2" #: callmapview.cpp:292 msgid "Border 3" msgstr "Ivica 3" #: callmapview.cpp:297 msgid "Draw Symbol Names" msgstr "Crtaj imena simbola" #: callmapview.cpp:298 msgid "Draw Cost" msgstr "Crtaj troškove" #: callmapview.cpp:299 msgid "Draw Location" msgstr "Crtaj lokaciju" #: callmapview.cpp:300 msgid "Draw Calls" msgstr "Crtaj pozive" #: callmapview.cpp:303 partselection.cpp:342 msgid "Ignore Proportions" msgstr "Ignoriši proporcije" #: callmapview.cpp:304 partselection.cpp:344 treemap.cpp:2887 msgid "Allow Rotation" msgstr "Dozvoli rotaciju" #: callmapview.cpp:321 treemap.cpp:2889 msgid "Shading" msgstr "Namotavanje" #: callmapview.cpp:431 msgid "Call Map: Current is '%1'" msgstr "Mapa poziva: Tekući je „%1“" #: callmapview.cpp:599 msgid "(no function)" msgstr "(nema funkcije)" #: callmapview.cpp:741 callmapview.cpp:858 msgid "(no call)" msgstr "(nema poziva)" #: callview.cpp:45 instrview.cpp:127 sourceview.cpp:52 msgid "Cost 2" msgstr "Trošak 2" #: callview.cpp:47 callview.cpp:51 msgid "Count" msgstr "Broj" #: callview.cpp:48 coverageview.cpp:50 msgid "Caller" msgstr "Pozivač" #: callview.cpp:52 coverageview.cpp:56 msgid "Callee" msgstr "Pozvani" #: callview.cpp:85 msgid "" "List of direct Callers

This list shows all functions calling the " "current selected one directly, together with a call count and the cost spent " "in the current selected function while being called from the function from " "the list.

An icon instead of an inclusive cost specifies that this is " "a call inside of a recursive cycle. An inclusive cost makes no sense here.

Selecting a function makes it the current selected one of this " "information panel. If there are two panels (Split mode), the function of the " "other panel is changed instead.

" msgstr "" "Lista direktnih pozivača

Ova lista prikazuje sve funkcije koje " "direktno pozivaju trenutno izabranu, zajedno sa brojem poziva i troškom " "trenutno izabrane funkcije dok je pozivaju funkcije iz liste.

Ikona " "umesto inkluzivnog troška znači da je taj poziv unutar rekurzivnog ciklusa, " "gde inkluzivni trošak nema smisla.

Ako izaberete funkciju, činite je " "novom trenutno izabranom funkcijom ovog informacionog panela. Ako postoje " "dva panela (režim podele), promeniće se funkcija u drugom panelu.

" #: callview.cpp:98 msgid "" "List of direct Callees

This list shows all functions called by the " "current selected one directly, together with a call count and the cost spent " "in this function while being called from the selected function.

Selecting a function makes it the current selected one of this " "information panel. If there are two panels (Split mode), the function of the " "other panel is changed instead.

" msgstr "" "Lista direktno pozvanih

Ova lista prikazuje sve funkcije direktno " "pozvane iz trenutno izabrane, zajedno sa brojem poziva i troškom načinjenim " "u toj funkciji dok je pozivana iz izabrane funkcije.

Ako izaberete " "funkciju, činite je novom trenutno izabranom funkcijom ovog informacionog " "panela. Ako postoje dva panela (režim podele), promeniće se funkcija u " "drugom panelu.

" #: configdlg.cpp:58 dumpselectionbase.ui:824 #, no-c-format msgid "ELF Objects" msgstr "ELF objekti" #: configdlg.cpp:60 msgid "Source Files" msgstr "Izvorni fajlovi" #: configdlg.cpp:61 msgid "C++ Classes" msgstr "C++ klase" #: configdlg.cpp:62 msgid "Function (no Grouping)" msgstr "Funkcija (bez grupisanja)" #: configdlg.cpp:157 configdlg.cpp:350 configdlg.cpp:371 msgid "(always)" msgstr "(uvek)" #: configdlg.cpp:210 msgid "KCachegrind Configuration" msgstr "Podešavanja KCachegrind-a" #: configdlg.cpp:211 msgid "" "The Maximum Number of List Items should be below 500.The previous set value " "(%1) will still be used." msgstr "" "Maksimalan broj stavki u listi bi trebalo da bude ispod 500. I dalje će se " "koristiti prethodno postavljena vrednost (%1)." #: configdlg.cpp:384 msgid "Choose Source Folder" msgstr "Izaberite izvornu fasciklu" #: configuration.cpp:67 msgid "Instruction Fetch" msgstr "Dohvat instrukcije" #: configuration.cpp:68 msgid "Data Read Access" msgstr "Pristup za čitanje podataka" #: configuration.cpp:69 msgid "Data Write Access" msgstr "Pristup za pisanje podataka" #: configuration.cpp:70 msgid "L1 Instr. Fetch Miss" msgstr "L1 promašaj dohvata instr." #: configuration.cpp:71 msgid "L1 Data Read Miss" msgstr "L1 promašaj čitanja podataka" #: configuration.cpp:72 msgid "L1 Data Write Miss" msgstr "L1 promašaj pisanja podataka" #: configuration.cpp:73 msgid "L2 Instr. Fetch Miss" msgstr "L2 promašaj dohvata instr." #: configuration.cpp:74 msgid "L2 Data Read Miss" msgstr "L2 promašaj čitanja podataka" #: configuration.cpp:75 msgid "L2 Data Write Miss" msgstr "L2 promašaj pisanja podataka" #: configuration.cpp:76 #, fuzzy msgid "LL Instr. Fetch Miss" msgstr "L1 promašaj dohvata instr." #: configuration.cpp:77 #, fuzzy msgid "LL Data Read Miss" msgstr "L1 promašaj čitanja podataka" #: configuration.cpp:78 #, fuzzy msgid "LL Data Write Miss" msgstr "L1 promašaj pisanja podataka" #: configuration.cpp:79 msgid "Samples" msgstr "Uzorci" #: configuration.cpp:80 msgid "System Time" msgstr "Sistemsko vreme" #: configuration.cpp:81 msgid "User Time" msgstr "Korisničko vreme" #: configuration.cpp:82 msgid "L1 Miss Sum" msgstr "L1 suma promašaja" #: configuration.cpp:83 msgid "L2 Miss Sum" msgstr "L2 suma promašaja" #: configuration.cpp:84 #, fuzzy msgid "LL Miss Sum" msgstr "L1 suma promašaja" #: configuration.cpp:85 msgid "Cycle Estimation" msgstr "Procena ciklusa" #: costlistitem.cpp:60 #, c-format msgid "" "_n: (%n item skipped)\n" "(%n items skipped)" msgstr "" "(preskočena je %n stavka)\n" "(preskočene su %n stavke)\n" "(preskočeno je %n stavki)" #: costtypeitem.cpp:56 msgid "Unknown Type" msgstr "Nepoznati tip" #: costtypeview.cpp:42 msgid "Event Type" msgstr "Tip događaja" #: costtypeview.cpp:43 coverageview.cpp:46 dumpselectionbase.ui:917 #: functionselectionbase.ui:103 partview.cpp:47 #, no-c-format msgid "Incl." msgstr "Uklj." #: costtypeview.cpp:44 coverageview.cpp:53 functionselectionbase.ui:62 #: functionselectionbase.ui:114 partview.cpp:48 #, no-c-format msgid "Self" msgstr "Sopstveno" #: costtypeview.cpp:45 msgid "Short" msgstr "Kratak" #: costtypeview.cpp:47 msgid "Formula" msgstr "Formula" #: costtypeview.cpp:81 msgid "" "Cost Types List

This list shows all cost types available and what " "the self/inclusive cost of the current selected function is for that cost " "type.

By choosing a cost type from the list, you change the cost type " "of costs shown all over KCachegrind to be the selected one.

" msgstr "" "Lista tipova troškova

Ova lista prikazuje sve dostupne tipove " "troškova i koji je sopstveni/kumulativni trošak trenutno izabrane funkcije " "za taj tip troška.

Izborom tipa troška iz liste, menjate tip troškova " "prikazanih svuda po KCachegrind-u na izabrani.

" #: costtypeview.cpp:98 msgid "Set Secondary Event Type" msgstr "Postavi sekundarni tip događaja" #: costtypeview.cpp:100 msgid "Remove Secondary Event Type" msgstr "Ukloni sekundarni tip događaja" #: costtypeview.cpp:105 msgid "Edit Long Name" msgstr "Uredi dugo ime" #: costtypeview.cpp:106 msgid "Edit Short Name" msgstr "Uredi skraćeno ime" #: costtypeview.cpp:107 msgid "Edit Formula" msgstr "Uredi formulu" #: costtypeview.cpp:108 msgid "Remove" msgstr "" #: costtypeview.cpp:115 msgid "New Cost Type ..." msgstr "Novi tip troška..." #: costtypeview.cpp:149 costtypeview.cpp:154 #, c-format msgid "New%1" msgstr "Novi%1" #: costtypeview.cpp:155 #, c-format msgid "New Cost Type %1" msgstr "Novi tip troška %1" #: coverageitem.cpp:65 coverageitem.cpp:205 functionitem.cpp:72 #, c-format msgid "" "_n: (%n function skipped)\n" "(%n functions skipped)" msgstr "" "(preskočena je %n funkcija)\n" "(preskočene su %n funkcije)\n" "(preskočeno je %n funkcija)" #: coverageview.cpp:48 coverageview.cpp:54 msgid "Distance" msgstr "Rastojanje" #: coverageview.cpp:49 dumpselectionbase.ui:928 functionselectionbase.ui:125 #: partview.cpp:49 #, no-c-format msgid "Called" msgstr "Pozvan" #: coverageview.cpp:55 msgid "Calling" msgstr "Poziva se" #: coverageview.cpp:90 msgid "" "List of all Callers

This list shows all functions calling the " "current selected one, either directly or with several functions in-between " "on the stack; the number of functions in-between plus one is called the " "Distance (e.g. for function A,B,C there exists a call from A to C " "when A calls B and B calls C, i.e. A => B => C. The distance here is 2).

Absolute cost shown is the cost spent in the selected function while a " "listed function is active; relative cost is the percentage of all cost spent " "in the selected function while the listed one is active. The cost graphic " "shows logarithmic percentage with a different color for each distance.

As there can be many calls from the same function, the distance column " "sometimes shows the range of distances for all calls happening; then, in " "parentheses, there is the medium distance, i.e. the distance where most of " "the call costs happened.

Selecting a function makes it the current " "selected one of this information panel. If there are two panels (Split " "mode), the function of the other panel is changed instead.

" msgstr "" "Lista svih pozivača

Ova lista prikazuje sve funkcije koje pozivaju " "trenutno izabranu, direktno ili uz nekoliko međufunkcija na steku; broj " "međufunkcija uvećan za 1 naziva se rastojanje (npr. ako za funkcije " "A, B, C postoji poziv iz A za C tako što A zove B, pa B zove C, tj. A => B " "=> C, rastojanje je 2).

Prikazani apsolutni trošak je trošak izabrane " "funkcije dok je izlistana funkcija aktivna; relativan trošak je procenat od " "svih troškova u izabranoj funkciji dok je izlistana aktivna. Grafikon " "troškova prikazuje logaritamski procenat, različitom bojom za svako " "rastojanje.

Pošto može biti mnogo poziva iz iste funkcije, kolona " "rastojanja ponekad prikazuje opseg rastojanja za sve pozive koji se " "dešavaju; tada se u zagradama nalazi srednje rastojanje, tj. rastojanje gde " "se najviše trošaka poziva desilo.

Ako izaberete funkciju, činite je " "novom trenutno izabranom funkcijom ovog informacionog panela. Ako postoje " "dva panela (režim podele), promeniće se funkcija u drugom panelu.

" #: coverageview.cpp:120 msgid "" "List of all Callees

This list shows all functions called by the " "current selected one, either directly or with several function in-between on " "the stack; the number of function in-between plus one is called the " "Distance (e.g. for function A,B,C there exists a call from A to C " "when A calls B and B calls C, i.e. A => B => C. The distance here is 2).

Absolute cost shown is the cost spent in the listed function while the " "selected is active; relative cost is the percentage of all cost spent in the " "listed function while the selected one is active. The cost graphic always " "shows logarithmic percentage with a different color for each distance.

As there can be many calls to the same function, the distance column " "sometimes shows the range of distances for all calls happening; then, in " "parentheses, there is the medium distance, i.e. the distance where most of " "the call costs happened.

Selecting a function makes it the current " "selected one of this information panel. If there are two panels (Split " "mode), the function of the other panel is changed instead.

" msgstr "" "Lista svih pozvanih

Ova lista prikazuje sve funkcije koje su " "pozvane iz trenutno izabrane, direktno ili uz nekoliko međufunkcija na " "steku; broj međufunkcija uvećan za 1 naziva se rastojanje (npr. ako " "za funkcije A, B, C postoji poziv iz A za C tako što A zove B, pa B zove C, " "tj. A => B => C, rastojanje je 2).

Prikazani apsolutni trošak je " "trošak izlistane funkcije dok je izabrana aktivna; relativan trošak je " "procenat od svih troškova u izlistanoj funkciji dok je izabrana aktivna. " "Grafikon troškova uvek prikazuje logaritamski procenat, različitom bojom za " "svako rastojanje.

Pošto može biti mnogo poziva iz iste funkcije, " "kolona rastojanja ponekad prikazuje opseg rastojanja za sve pozive koji se " "dešavaju; tada se u zagradama nalazi srednje rastojanje, tj. rastojanje gde " "se najviše trošaka poziva desilo.

Ako izaberete funkciju, " "činite je novom trenutno izabranom funkcijom ovog informacionog panela. Ako " "postoje dva panela (režim podele), promeniće se funkcija u drugom panelu.

" #: functionselection.cpp:52 toplevel.cpp:772 msgid "(No Grouping)" msgstr "(Bez grupisanja)" #: functionselection.cpp:176 #, c-format msgid "Go to %1" msgstr "Idi na %1" #: functionselection.cpp:203 msgid "Show All Items" msgstr "Prikaži sve stavke" #: functionselection.cpp:226 msgid "No Grouping" msgstr "Bez grupisanja" #: functionselection.cpp:243 toplevel.cpp:763 msgid "Grouping" msgstr "Grupisanje" #: instritem.cpp:106 sourceitem.cpp:86 msgid "Active call to '%1'" msgstr "Aktivni poziv za „%1“" #: instritem.cpp:108 sourceitem.cpp:88 msgid "" "_n: %n call to '%1'\n" "%n calls to '%1'" msgstr "" "%n poziv za „%1“\n" "%n poziva za „%1“\n" "%n poziva za „%1“" #: instritem.cpp:137 msgid "Jump %1 of %2 times to 0x%3" msgstr "Skoči %1 od %2 puta na 0x%3" #: instritem.cpp:142 msgid "Jump %1 times to 0x%2" msgstr "Skoči %1 puta na 0x%2" #: instritem.cpp:185 sourceitem.cpp:169 msgid "(cycle)" msgstr "(ciklus)" #: dumpselectionbase.ui:906 instrview.cpp:125 sourceview.cpp:50 #, no-c-format msgid "#" msgstr "#" #: instrview.cpp:129 msgid "Hex" msgstr "Heks" #: instrview.cpp:131 tabview.cpp:313 msgid "Assembler" msgstr "Asembler" #: instrview.cpp:132 msgid "Source Position" msgstr "Položaj u izvoru" #: instrview.cpp:163 msgid "" "Annotated Assembler

The annotated assembler list shows the machine " "code instructions of the current selected function together with (self) cost " "spent while executing an instruction. If this is a call instruction, lines " "with details on the call happening are inserted into the source: the cost " "spent inside of the call, the number of calls happening, and the call " "destination.

The disassembler output shown is generated with the " "'objdump' utility from the 'binutils' package.

Select a line with call " "information to make the destination function of this call current.

" msgstr "" "Asembler sa pribeleškama

Lista asemblera sa pribeleškama prikazuje " "instrukcije mašinskog kôda trenutno izabrane funkcije, zajedno sa " "(sopstvenim) troškom dok se izvršava instrukcija. Ako je ovo instrukcija " "poziva, linije sa detaljima o pozivu koji se dešava ubacuju se u izvor: to " "su trošak unutar poziva, broj poziva koji se dešavaju i odredište poziva.

Asemblerski izlaz dobija se pomoću alata „objdump“ iz paketa „binutils“." "

Izaberite liniju sa informacijom o pozivu da biste učinili odredišnu " "funkciju ovog poziva tekućom.

" #: instrview.cpp:195 #, c-format msgid "Go to Address %1" msgstr "Idi na adresu %1" #: instrview.cpp:207 msgid "Hex Code" msgstr "Heks. kôd" #: instrview.cpp:426 msgid "There is no instruction info in the profile data file." msgstr "" "Unutar fajla sa profilišućim podacima nema informacija o instrukcijama." #: instrview.cpp:428 msgid "For the Valgrind Calltree Skin, rerun with option" msgstr "Da biste doblili Valgrind Calltree Skin, pokrenite ponovo sa opcijom" #: instrview.cpp:429 msgid " --dump-instr=yes" msgstr " --dump-instr=yes" #: instrview.cpp:430 msgid "To see (conditional) jumps, additionally specify" msgstr "Da biste videli (uslovne) skokove, dodatno navedite" #: instrview.cpp:431 msgid " --trace-jump=yes" msgstr " --trace-jump=yes" #: instrview.cpp:629 msgid "There is an error trying to execute the command" msgstr "Greška prilikom izvršavanja naredbe" #: instrview.cpp:634 instrview.cpp:900 msgid "Check that you have installed 'objdump'." msgstr "Proverite da li je instaliran „objdump“." #: instrview.cpp:636 instrview.cpp:902 msgid "This utility can be found in the 'binutils' package." msgstr "Ovaj alat se može naći u paketu „binutils“." #: instrview.cpp:739 msgid "(No Assembler)" msgstr "(Nema asemblera)" #: instrview.cpp:875 #, c-format msgid "" "_n: There is %n cost line without assembler code.\n" "There are %n cost lines without assembler code." msgstr "" "Postoji %n troškovna linija bez asemblerskog kôda.\n" "Postoji %n troškovne linije bez asemblerskog kôda.\n" "Postoji %n troškovnih linija bez asemblerskog kôda." #: instrview.cpp:877 msgid "This happens because the code of" msgstr "Ovo se dešava zato što kôd od" #: instrview.cpp:880 msgid "does not seem to match the profile data file." msgstr "izgleda ne odgovara fajlu sa profilišućim podacima." #: instrview.cpp:883 msgid "Are you using an old profile data file or is the above mentioned" msgstr "" "Da li koristite stari fajl sa profilišućim podacima ili je gore pomenuti" #: instrview.cpp:885 msgid "ELF object from an updated installation/another machine?" msgstr "ELF objekat iz ažurirane instalacije/sa druge mašine?" #: instrview.cpp:893 msgid "There seems to be an error trying to execute the command" msgstr "Izgleda da dolazi do greške pri pokušaju da se izvrši naredba" #: instrview.cpp:898 msgid "Check that the ELF object used in the command exists." msgstr "Proverite da li ELF objekat koji se koristi u naredbi zaista postoji." #: main.cpp:38 msgid "Run under cachegrind" msgstr "Pokreni pod Cachegrind-om" #: main.cpp:39 msgid "Show information of this trace" msgstr "Prikaži informacije za ovaj trag" #: main.cpp:46 msgid "KCachegrind" msgstr "KCachegrind" #: main.cpp:48 msgid "TDE Frontend for Cachegrind" msgstr "TDE-ov interfejs za Cachegrind" #: main.cpp:50 msgid "(C) 2002, 2003, 2004" msgstr "© 2002, 2003, 2004" #: main.cpp:53 msgid "Author/Maintainer" msgstr "Autor/Održavalac" #: partgraph.cpp:167 #, c-format msgid "Profile Part %1" msgstr "Deo profila %1" #: partgraph.cpp:226 msgid "(no trace)" msgstr "(nema traga)" #: partgraph.cpp:229 msgid "(no part)" msgstr "(nema dela)" #: partgraph.cpp:423 tracedata.cpp:249 tracedata.cpp:254 tracedata.cpp:2824 #: tracedata.cpp:3241 tracedata.cpp:3327 tracedata.cpp:4165 tracedata.cpp:4173 #: tracedata.cpp:4238 msgid "(unknown)" msgstr "(nepoznato)" #: partlistitem.cpp:49 msgid " (Thread %1)" msgstr " (Nit %1)" #: partlistitem.cpp:56 msgid "(none)" msgstr "(nijedno)" #: partselection.cpp:151 msgid "Profile Part Overview: Current is '%1'" msgstr "Pregled delova profila: Tekući je „%1“" #: partselection.cpp:287 msgid "Deselect" msgstr "Poništi izbor" #: partselection.cpp:287 partselection.cpp:311 msgid "Select" msgstr "Izaberi" #: partselection.cpp:292 msgid "Select All Parts" msgstr "Izaberi sve delove" #: partselection.cpp:294 msgid "Visible Parts" msgstr "Vidljivi delovi" #: partselection.cpp:296 msgid "Hide Selected Parts" msgstr "Sakrij izabrane delove" #: partselection.cpp:297 msgid "Unhide Hidden Parts" msgstr "Prikaži skrivene delove" #: partselection.cpp:302 toplevel.cpp:1687 msgid "Go Back" msgstr "Idi nazad" #: partselection.cpp:322 msgid "Partitioning Mode" msgstr "Režim particionisanja" #: partselection.cpp:323 msgid "Diagram Mode" msgstr "Režim dijagrama" #: partselection.cpp:324 msgid "Zoom Function" msgstr "Funkcija uveličanja" #: partselection.cpp:325 msgid "Show Direct Calls" msgstr "Prikaži direktne pozive" #: partselection.cpp:326 msgid "Increment Shown Call Levels" msgstr "Uvećaj prikazane nivoe poziva" #: partselection.cpp:340 msgid "Draw Names" msgstr "Crtaj imena" #: partselection.cpp:341 msgid "Draw Costs" msgstr "Crtaj troškove" #: partselection.cpp:343 msgid "Draw Frames" msgstr "Crtaj okvire" #: partselection.cpp:359 msgid "Hide Info" msgstr "Sakrij info" #: partselection.cpp:361 msgid "Show Info" msgstr "Prikaži info" #: partselection.cpp:541 msgid "(no trace loaded)" msgstr "(nema učitanog traga)" #: partview.cpp:46 tracedata.cpp:179 msgid "Profile Part" msgstr "Deo profila" #: partview.cpp:51 msgid "Comment" msgstr "Komentar" #: partview.cpp:73 msgid "" "Trace Part List

This list shows all trace parts of the loaded " "trace. For each part, the self/inclusive cost of the current selected " "function, spent in the part, is shown; percentage costs are always relative " "to the total cost of the part (not to the whole trace as in the " "Trace Part Overview). Also shown are the calls happening to/from the current " "function inside of the trace part.

By choosing one or more trace parts " "from the list, the costs shown all over KCachegrind will only be the ones " "spent in the selected part(s). If no list selection is shown, in fact all " "trace parts are selected implicitly.

This is a multi-selection list. " "You can select ranges by dragging the mouse or use SHIFT/CTRL modifiers. " "Selection/Deselection of trace parts can also be done by using the Trace " "Part Overview Dockable. This one also supports multiple selection.

Note that the list is hidden if only one trace part is loaded.

" msgstr "" "Lista delova traga

Ova lista prikazuje sve delove učitanog traga. " "Za svaki deo, prikazan je sopstveni/inkluzivni trošak trenutno izabrane " "funkcije, načinjen u svakom delu; procentualni troškovi su uvek relativni " "ukupnom trošku dela (ne celog traga, kao u pregledu delova traga). " "Takođe su prikazani pozivi koji se dešavaju ka/iz trenutno izabrane funkcije " "unutar dela traga.

Izborom jednog ili više delova traga iz liste, " "troškovi prikazani svuda po KCachegrind-u biće samo oni načinjeni u " "izabranim delovima. Ako nema izbora, implicitno se podrazumeva da su " "izabrani svi delovi.

Ovo je višeizborna lista. Možete birati opsege " "prevlačenjem miša ili upotrebom modifikatora SHIFT/CTRL. Izbor/poništavanje " "izbora delova traga može se obaviti i korišćenjem prozora za pregled delova " "traga (i u njemu je moguć višestruki izbor).

Primetite da je ova lista " "skrivena ako je učitan samo jedan deo traga.

" #: partview.cpp:106 msgid "Select '%1'" msgstr "Izaberi „%1“" #: partview.cpp:107 msgid "Hide '%1'" msgstr "Sakrij „%1“" #: partview.cpp:111 msgid "Hide Selected" msgstr "Sakrij izabrano" #: partview.cpp:112 msgid "Show All" msgstr "Prikaži sve" #: sourceitem.cpp:125 msgid "Jump %1 of %2 times to %3" msgstr "Skoči %1 od %2 puta na %3" #: sourceitem.cpp:130 msgid "Jump %1 times to %2" msgstr "Skoči %1 puta na %2" #: sourceview.cpp:54 sourceview.cpp:554 msgid "Source (unknown)" msgstr "Izvor (nepoznat)" #: sourceview.cpp:89 msgid "" "Annotated Source

The annotated source list shows the source lines " "of the current selected function together with (self) cost spent while " "executing the code of this source line. If there was a call in a source " "line, lines with details on the call happening are inserted into the source: " "the cost spent inside of the call, the number of calls happening, and the " "call destination.

Select a inserted call information line to make the " "destination function current.

" msgstr "" "Izvor sa pribeleškama

Lista izvora sa pribeleškama prikazuje " "izvorne linije trenutno izabrane funkcije, zajedno sa (sopstvenim) troškom " "izvršavanja kôda u datoj izvornoj liniji. Ako je u izvornoj liniji bio " "poziv, linije sa detaljima poziva koji se dešava ubacuju se u kôd: to su " "trošak unutar poziva, broj poziva koji se dešavaju i odredište poziva.

Izaberite ubačenu informacionu liniju poziva da biste učinili odredišnu " "funkciju tekućom.

" #: sourceview.cpp:120 #, c-format msgid "Go to Line %1" msgstr "Idi na liniju %1" #: sourceview.cpp:293 msgid "(No Source)" msgstr "(Nema izvora)" #: sourceview.cpp:512 msgid "There is no cost of current selected type associated" msgstr "Nema troška trenutno izabranog tipa pridruženog" #: sourceview.cpp:514 msgid "with any source line of this function in file" msgstr "bilo kojoj izvornoj liniji ove funkcije u fajlu" #: sourceview.cpp:518 msgid "Thus, no annotated source can be shown." msgstr "Zato, kôd sa pribeleškama ne može da se prikaže." #: sourceview.cpp:553 msgid "Source ('%1')" msgstr "Izvor („%1“)" #: sourceview.cpp:559 msgid "--- Inlined from '%1' ---" msgstr "--- U liniji iz „%1“ ---" #: sourceview.cpp:560 msgid "--- Inlined from unknown source ---" msgstr "--- U liniji iz nepoznatog izvora ---" #: sourceview.cpp:565 msgid "There is no source available for the following function:" msgstr "Izvor nije dostupan za sledeću funkciju:" #: sourceview.cpp:570 msgid "This is because no debug information is present." msgstr "Ovo je zato što nisu prisutne informacije za ispravljanje grešaka." #: sourceview.cpp:572 msgid "Recompile source and redo the profile run." msgstr "Ponovo prevedite izvor i ponovite profilisanje." #: sourceview.cpp:575 msgid "The function is located in this ELF object:" msgstr "Funkcija se nalazi unutar ovog ELF objekta:" #: sourceview.cpp:583 msgid "This is because its source file cannot be found:" msgstr "Ovo je zato što njen izvorni fajl ne može da se nađe:" #: sourceview.cpp:587 msgid "Add the folder of this file to the source folder list." msgstr "Dodaj fasciklu ovog fajla u listu izvornih fascikli." #: sourceview.cpp:589 msgid "The list can be found in the configuration dialog." msgstr "Lista se može naći u dijalogu za podešavanje." #: tabview.cpp:64 msgid "Move to Top" msgstr "Pomeri na vrh" #: tabview.cpp:65 tabview.cpp:91 #, fuzzy msgid "Top" msgstr "Gore levo" #: tabview.cpp:68 msgid "Move to Right" msgstr "Pomeri na desno" #: tabview.cpp:69 tabview.cpp:92 #, fuzzy msgid "Right" msgstr "Gore desno" #: tabview.cpp:72 msgid "Move to Bottom" msgstr "Pomeri na dno" #: tabview.cpp:73 tabview.cpp:93 #, fuzzy msgid "Bottom" msgstr "Dole levo" #: tabview.cpp:76 msgid "Move to Bottom Left" msgstr "Pomeri dole levo" #: tabview.cpp:77 tabview.cpp:94 treemap.cpp:2908 msgid "Bottom Left" msgstr "Dole levo" #: tabview.cpp:79 msgid "Move Area To" msgstr "Pomeri oblast" #: tabview.cpp:81 msgid "Hide This Tab" msgstr "Sakrij ovaj jezičak" #: tabview.cpp:82 msgid "Hide Area" msgstr "Sakrij oblast" #: tabview.cpp:95 msgid "Show Hidden On" msgstr "Prikaži skrivene uključeno" #: tabview.cpp:242 msgid "(No profile data file loaded)" msgstr "(Nije učitan nijedan fajl sa profilišućim podacima)" #: tabview.cpp:281 msgid "Types" msgstr "Tipovi" #: tabview.cpp:284 msgid "Callers" msgstr "Pozivači" #: tabview.cpp:287 msgid "All Callers" msgstr "Svi pozivači" #: tabview.cpp:290 msgid "Caller Map" msgstr "Mapa pozivača" #: tabview.cpp:293 msgid "Source" msgstr "Izvor" #: tabview.cpp:297 msgid "Parts" msgstr "Delovi" #: tabview.cpp:300 msgid "Call Graph" msgstr "Grafikon poziva" #: tabview.cpp:303 msgid "Callees" msgstr "Pozvani" #: tabview.cpp:306 msgid "All Callees" msgstr "Svi pozvani" #: tabview.cpp:310 msgid "Callee Map" msgstr "Mapa pozvanih" #: tabview.cpp:553 msgid "" "Information Tabs

This widget shows information for the current " "selected function in different tabs:

  • The Costs tab shows a list of " "available event types and the inclusive and self costs regarding to these " "types.
  • The Parts tab shows a list of trace parts if the trace " "consists of more than one part (otherwise, this tab is hided). The cost of " "the selected function spent in the different parts together with the calls " "happening is shown.
  • The Call Lists tab shows direct callers and " "callees of the function in more detail.
  • The Coverage tab shows the " "same is the Call Lists tab, but not only direct callers and callees but also " "indirect ones.
  • The Call Graph tab shows a graphical visualization of " "the calls done by this function.
  • The Source tab presents annotated " "source code if debugging information and the source file is available.
  • The Assembler tab presents annotated assembler code if trace " "information on instruction level is available.
For more " "information, see the What's This? help of the corresponding tab " "widget

" msgstr "" "Informacioni jezičci

Ove kontrole prikazuju informacije o trenutno " "izabranoj funkciji na različitim jezičcima:

  • Jezičak „Troškovi“ " "prikazuje listu dostupnih tipova događaja i inkluzivne i sopstvene troškove " "prema tipu.
  • Jezičak „Delovi“ prikazuje listu delova traga ako se " "trag sastoji od više od jednog dela (u suprotnom, ovaj jezičak je skriven). " "Prikazan je trošak izabrane funkcije u svim delovima zajedno sa pozivima " "koji se dešavaju.
  • Jezičak „Lista poziva“ prikazuje direktne pozivače " "i pozvane funkcija sa više detalja.
  • Jezičak „Pokrivenost“ prikazuje " "isto što i jezičak „Lista poziva“, ali ne samo direktne pozivače i pozvane, " "već i indirektne.
  • Jezičak „Grafikon poziva“ prikazuje grafičku " "vizuelizaciju poziva koje pravi ova funkcija.
  • Jezičak „Izvor“ " "predstavlja izvorni kôd sa pribeleškama, ako su informacije za ispravljanje " "grešaka i izvorni fajl dostupni.
  • Jezičak „Asembler“ predstavlja " "označen asemblerski kôd, ako je dostupna informacija o tragu na nivou " "instrukcije.
Za više informacija, pogledajte pomoć Šta je ovo? odgovarajućeg jezička.

" #: tabview.cpp:630 msgid "(No Data loaded)" msgstr "(Nema učitanih podataka)" #: tabview.cpp:631 msgid "(No function selected)" msgstr "(Nema izabranih funkcija)" #: partselectionbase.ui:16 toplevel.cpp:276 toplevel.cpp:576 #, no-c-format msgid "Parts Overview" msgstr "Pregled delova" #: toplevel.cpp:283 msgid "" "The Parts Overview

A trace consists of multiple trace parts when " "there are several profile data files from one profile run. The Trace Part " "Overview dockable shows these, horizontally ordered in execution time; the " "rectangle sizes are proportional to the total cost spent in the parts. You " "can select one or several parts to constrain all costs shown to these parts " "only.

The parts are further subdivided: there is a partitioning and an " "callee split mode:

  • Partitioning: You see the partitioning into " "groups for a trace part, according to the group type selected. E.g. if ELF " "object groups are selected, you see colored rectangles for each used ELF " "object (shared library or executable), sized according to the cost spent " "therein.
  • Callee: A rectangle showing the inclusive cost of the " "current selected function in the trace part is shown. This is split up into " "smaller rectangles to show the costs of its callees.

" msgstr "" "Pregled delova

Trag se sastoji od više delova kada postoji više " "profilnih fajlova iz jednog profilisanja. Prozor za pregled delova traga " "prikazuje te delove, vodoravno uređene po vremenu izvršavanja; veličine " "pravougaonika su proporcionalne ukupnom trošku u delovima. Možete izabrati " "jedan ili više delova da biste ograničili sve prikazane troškove samo na te " "delove.

Delovi su dalje podeljeni: postoje particioni i prema " "pozvanima režimi podele:

  • Particioni: Vidite podelu po grupama za deo " "traga, prema izabranom tipu grupe. Npr. ako su izabrane grupe ELF objekata, " "videćete obojene pravougaonike za svaki korišćeni ELF objekat (deljena " "biblioteka ili izvršni fajl), veličine proporcionalne trošku.
  • Prema " "pozvanima: Prikazuje se pravougaonik koji pokazuje kumulativan trošak " "trenutno izabrane funkcije u delu traga. Ovo se još deli da bi se pokazali " "kumulativni troškovi svih iz nje pozvanih funkcija.

" #: toplevel.cpp:313 msgid "Top Cost Call Stack" msgstr "Stek poziva najvećeg troška" #: toplevel.cpp:315 msgid "" "The Top Cost Call Stack

This is a purely fictional 'most probable' " "call stack. It is built up by starting with the current selected function " "and adds the callers/callees with highest cost at the top and to bottom.

The Cost and Calls columns show the cost used for all " "calls from the function in the line above.

" msgstr "" "Stek poziva najvećeg troška

Ovo je čisto zamišljeni, " "„najverovatniji“ stek poziva. On se gradi pokretanjem trenutno izabrane " "funkcije i dodavanjem pozivača/pozvanih sa najvećim troškom na vrh i na dno." "

Kolone Trošak i Pozivi prikazuju trošak za sve pozive " "iz funkcije u gornjoj liniji.

" #: toplevel.cpp:328 msgid "Flat Profile" msgstr "Ravan profil" #: toplevel.cpp:338 msgid "" "The Flat Profile

The flat profile contains a group and a function " "selection list. The group list contains all groups where costs are spent in, " "depending on the chosen group type. The group list is hidden when group type " "'Function' is selected.

The function list contains the functions of the " "selected group (or all for 'Function' group type), ordered by the costs " "spent therein. Functions with costs less than 1% are hidden on default.

" msgstr "" "Ravan profil

Ravan profil sadrži liste za izbor grupe i funkcije. " "Lista grupa sadrži sve grupe u kojima dolazi do troškova, u zavisnosti od " "izabranog tipa grupe. Lista grupa je sakrivena kada je kao tip grupe " "izabrano „Funkcija“

Lista funkcija sadrži funkcije izabrane grupe (ili " "sve funkcije ako je tip grupe „Funkcija“), poređane po troškovima. Funkcije " "sa troškom manjim od 1% su podrazumevano sakrivene.

" #: dumpselectionbase.ui:16 toplevel.cpp:352 toplevel.cpp:604 #, no-c-format msgid "Profile Dumps" msgstr "Izbačaji profila" #: toplevel.cpp:362 msgid "" "Profile Dumps

This dockable shows in the top part the list of " "loadable profile dumps in all subdirectories of:

  • current working " "directory of KCachegrind, i.e. where it was started from, and
  • the " "default profile dump directory given in the configuration.
The list is " "sorted according the the target command profiled in the corresponding dump.

On selecting a profile dump, information for it is shown in the bottom " "area of the dockable:

  • Options allows you to view the profiled " "command and profile options of this dump. By changing any item, a new (yet " "unexisting) profile template is created. Press Run Profile to start " "aprofile run with these options in the background.
  • Info gives " "detailed info on the selected dump like event cost summary and properties of " "the simulated cache.
  • State is only available for current " "happening profiles runs. Press Update to see different counters of " "the run, and a stack trace of the current position in the program profiled. " "Check the Every option to let KCachegrind regularly poll these data. " "Check the Sync option to let the dockable activate the top function " "in the current loaded dump.

" msgstr "" "Izbačaji profila

Ovaj prozor prikazuje u gornjem delu listu " "izbačaja profila koji se mogu učitati u svim poddirektorijumima: " "

  • tekućeg radnog direktorijuma KCachegrind-a, tj. onog u kome je " "pokrenut, i
  • podrazumevanog direktorijuma za izbačaje profila, koji je " "dat u podešavanjima.
Lista je sortirana prema ciljnoj naredbi koja je " "profilisana u odgovarajućem izbačaju.

Kada izaberete izbačaj profila, " "informacije o njemu biće prikazane u donjem delu prozora:

  • Opcije vam omogućavaju da vidite profilisanu komandu i opcije profila ovog " "izbačaja. Promenom neke od stavki, pravi se novi (još uvek nepostojeći) " "šablon profila. Pritisnite Pokreni profil da biste u pozadini " "započeli izvršavanje profila sa ovim opcijama.
  • Info vam daje " "detaljne informacije o izabranom izbačaju, kao što su zbir troškova događaja " "i svojstva simuliranog keša.
  • Stanje je dostupno samo za profil " "koji se trenutno izvršava. Pritisnite Ažuriraj da biste videli razne " "brojače izvršavanja, i trag steka trenutne pozicije u programu koji se " "profiliše. Uključite opciju Svakih da bi KCachegrind regularno " "proveravao ove podatke. Uključite opciju Sinh. da bi prozor mogao da " "aktivira najvišu funkciju u trenutno učitanom izbačaju.

" #: toplevel.cpp:450 msgid "&Duplicate" msgstr "&Dupliraj" #: toplevel.cpp:454 msgid "" "Duplicate Current Layout

Make a copy of the current layout.

" msgstr "Dupliraj tekući raspored

Pravi kopiju tekućeg rasporeda.

" #: toplevel.cpp:458 msgid "&Remove" msgstr "" #: toplevel.cpp:461 msgid "" "Remove Current Layout

Delete current layout and make the previous " "active.

" msgstr "" "Ukloni tekući raspored

Briše tekući raspored i postavlja prethodni " "kao aktivan.

" #: toplevel.cpp:465 msgid "&Go to Next" msgstr "&Idi na sledeći" #: toplevel.cpp:469 msgid "Go to Next Layout" msgstr "Idi na sledeći raspored" #: toplevel.cpp:472 msgid "&Go to Previous" msgstr "&Idi na prethodni" #: toplevel.cpp:476 msgid "Go to Previous Layout" msgstr "Idi na prethodni raspored" #: toplevel.cpp:479 msgid "&Restore to Default" msgstr "&Vrati na podrazumevano" #: toplevel.cpp:482 msgid "Restore Layouts to Default" msgstr "Vrati rasporede na podrazumevano" #: toplevel.cpp:485 msgid "&Save as Default" msgstr "&Snimi kao podrazumevano" #: toplevel.cpp:488 msgid "Save Layouts as Default" msgstr "Snimi rasporede kao podrazumevane" #: toplevel.cpp:499 msgid "New

Open new empty KCachegrind window.

" msgstr "Novi

Otvara novi prazan prozor KCachegrind-a.

" #: toplevel.cpp:502 msgid "&Add..." msgstr "&Dodaj..." #: toplevel.cpp:505 msgid "" "Add Profile Data

This opens an additional profile data file in the " "current window.

" msgstr "" "Dodaj profilišuće podatke

Ovo otvara dodatni fajl sa profilišućim " "podacima u tekućem prozoru.

" #: toplevel.cpp:509 msgid "&Reload" msgstr "" #: toplevel.cpp:517 msgid "Reload Profile Data

This loads any new created parts, too.

" msgstr "" "Ponovo učitaj profilišuće podatke

Ovim se takođe učitavaju i svi " "novonapravljeni delovi.

" #: toplevel.cpp:521 msgid "&Export Graph" msgstr "Izv&ezi grafikon" #: toplevel.cpp:525 msgid "" "Export Call Graph

Generates a file with extension .dot for the " "tools of the GraphViz package.

" msgstr "" "Izvezi grafikon poziva

Generiše se fajl sa nastvakom .dot za alate " "paketa GraphViz.

" #: toplevel.cpp:531 msgid "&Force Dump" msgstr "&Prisili izbačaj" #: toplevel.cpp:540 msgid "" "Force Dump

This forces a dump for a Callgrind profile run in the " "current directory. This action is checked while KCachegrind looks for the " "dump. If the dump is finished, it automatically reloads the current trace. " "If this is the one from the running Callgrind, the new created trace part " "will be loaded, too.

Force dump creates a file 'callgrind.cmd', and " "checks every second for its existence. A running Callgrind will detect this " "file, dump a trace part, and delete 'callgrind.cmd'. The deletion is " "detected by KCachegrind, and it does a Reload. If there's no " "Callgrind running, press 'Force Dump' again to cancel the dump request. This " "deletes 'callgrind.cmd' itself and stops polling for a new dump.

Note: " "A Callgrind run only detects existence of 'callgrind.cmd' when " "actively running a few milliseconds, i.e. not sleeping. Tip: For a " "profiled GUI program, you can awake Callgrind e.g. by resizing a window of " "the program.

" msgstr "" "Prisili izbačaj

Ovim se prisiljava izbačaj trenutnog profila u " "uzvršavanju Callgrind-a u tekući direktorijum. Ova akcija se proverava dok " "KCachegrind traži izbačaj. Ako je izbačaj završen, on će automatski ponovo " "učitati tekući trag. Ako je taj trag iz Callgrind-a koji se izvršava, takođe " "će biti učitan i novonapravljeni deo traga.

Prisilom izbačaja se pravi " "fajl po imenu „callgrind.cmd“ i svake sekunde se proverava njegovo " "postojanje. Callgrind koji se izvršava će primetiti ovaj fajl, izbaciti deo " "traga i izbrisati fajl. To brisanje KCachegrind detektuje i ponovo učitava. " "Ako se Callgrind ne izvršava, pritisnite ponovo „Prisili izbačaj“ " "da biste otkazali zahtev za izbačaj. Ovim se briše fajl „callgrind.cmd“ i " "zaustavlja provera za novim izbačajem.

Napomena: Callgrind koji se " "izvršava detektuje prisustvo fajla „callgrind.cmd“ samo kada " "aktivno radi nekoliko milisekundi, tj. ne i kada spava. Savet: Ako " "profilišete program sa grafičkim interfejsom, možete probuditi Callgrind " "npr. promenom veličine prozora.

" #: toplevel.cpp:565 msgid "" "Open Profile Data

This opens a profile data file, with possible " "multiple parts

" msgstr "" "Otvori profilišuće podatke

Ovim se otvara fajl profilišućih " "podataka, sa mogućim višestrukim delovima

" #: toplevel.cpp:581 msgid "Show/Hide the Parts Overview Dockable" msgstr "Prikaži/sakrij prozor pregleda delova" #: toplevel.cpp:585 msgid "Call Stack" msgstr "Stek poziva" #: toplevel.cpp:590 msgid "Show/Hide the Call Stack Dockable" msgstr "Prikaži/sakrij prozor steka poziva" #: functionselectionbase.ui:16 toplevel.cpp:594 #, no-c-format msgid "Function Profile" msgstr "Profil funkcije" #: toplevel.cpp:599 msgid "Show/Hide the Function Profile Dockable" msgstr "Prikaži/sakrij prozor profila funkcije" #: toplevel.cpp:609 msgid "Show/Hide the Profile Dumps Dockable" msgstr "Prikaži/sakrij prozor izbačaja profila" #: toplevel.cpp:614 msgid "Show Relative Costs" msgstr "Prikaži relativne troškove" #: toplevel.cpp:621 msgid "Show Absolute Costs" msgstr "Prikaži apsolutne troškove" #: toplevel.cpp:624 msgid "Show relative instead of absolute costs" msgstr "Prikaži relativne umesto apsolutnih troškova" #: toplevel.cpp:628 msgid "Percentage Relative to Parent" msgstr "Procenat relativno prema roditelju" #: toplevel.cpp:634 msgid "Show percentage costs relative to parent" msgstr "Prikaži procentualne troškove relativne prema roditelju" #: toplevel.cpp:638 msgid "" "Show percentage costs relative to parent

If this is switched off, " "percentage costs are always shown relative to the total cost of the profile " "part(s) that are currently browsed. By turning on this option, percentage " "cost of shown cost items will be relative to the parent cost item." "

    Cost TypeParent Cost
    Function CumulativeTotal
    Function SelfFunction Group (*) / Total
    CallFunction " "Cumulative
    Source LineFunction Cumulative

    (*) Only if function grouping is switched on (e.g. ELF object " "grouping)." msgstr "" "Prikaži procentualne troškove relativne prema roditelju

    Ako je ovo " "isključeno, procentualni troškovi su uvek prikazani relativno prema ukupnom " "trošku delova profila koji se trenutno pregledaju. Uključivanjem ove opcije, " "procentualni trošak prikazanih troškovnih stavki će biti relativan prema " "roditeljskoj troškovnoj stavki.

      (*) Samo ako je uključeno grupisanje funkcija (npr. grupisanje ELF " "objekata)." #: toplevel.cpp:653 msgid "Do Cycle Detection" msgstr "Radi detekciju ciklusa" #: toplevel.cpp:659 msgid "Skip Cycle Detection" msgstr "Preskoči detekciju ciklusa" #: toplevel.cpp:662 msgid "" "Detect recursive cycles

      If this is switched off, the treemap " "drawing will show black areas when a recursive call is made instead of " "drawing the recursion ad infinitum. Note that the size of black areas often " "will be wrong, as inside recursive cycles the cost of calls cannot be " "determined; the error is small, however, for false cycles (see " "documentation).

      The correct handling for cycles is to detect them and " "collapse all functions of a cycle into a virtual function, which is done " "when this option is selected. Unfortunately, with GUI applications, this " "often will lead to huge false cycles, making the analysis impossible; " "therefore, there is the option to switch this off." msgstr "" "Detektuj rekurzivne cikluse

      Ako je ovo isključeno, crtež mape " "stabla će prikazivati crne oblasti kada se napravi rekurzivni poziv umesto " "crtanja rekurzije do beskonačnosti. Primetite da će veličina crnih oblasti " "često biti pogrešna, pošto se unutar rekurzivnih poziva ne može odrediti " "trošak poziva. Međutim, greška je mala za lažne cikluse (pogledati " "dokumentaciju).

      Ispravno rukovanje za cikluse je da se detektuju, a zatim " "se sve funkcije ciklusa sažmu u virtuelnu funkciju. Ovo se i radi kada je " "ova opcija uključena. Nažalost, kod programa sa grafičkim interfejsom, ovo " "obično vodi do ogromnih lažnih ciklusa, čineći analizu nemogućom. Zato je i " "data mogućnost da se isključi." #: toplevel.cpp:684 toplevel.cpp:724 msgid "Go back in function selection history" msgstr "Vrati se nazad u istoriji izbora funkcija" #: toplevel.cpp:690 toplevel.cpp:736 msgid "Go forward in function selection history" msgstr "Idi napred u istoriji izbora funkcija" #: toplevel.cpp:696 toplevel.cpp:710 msgid "" "Go Up

      Go to last selected caller of current function. If no caller " "was visited, use that with highest cost.

      " msgstr "" "Idi gore

      Ide se na poslednje izabrani pozivač tekuće funkcije. Ako " "nije posećen nijedan pozivač, koristi se onaj sa najvećim troškom.

      " #: toplevel.cpp:702 msgid "&Up" msgstr "&Gore" #: toplevel.cpp:741 toplevel.cpp:1646 msgid "Primary Event Type" msgstr "Primarni tip događaja" #: toplevel.cpp:743 msgid "Select primary event type of costs" msgstr "Izaberite primarni tip događaja za troškove" #: toplevel.cpp:753 toplevel.cpp:1649 msgid "Secondary Event Type" msgstr "Sekundarni tip događaja" #: toplevel.cpp:755 msgid "Select secondary event type for cost e.g. shown in annotations" msgstr "" "Izaberite sekundarni tip događaja za troškove npr. prikazan u pribeleškama" #: toplevel.cpp:766 msgid "Select how functions are grouped into higher level cost items" msgstr "Izaberite kako se funkcije grupišu u troškovne stavke višeg nivoa" #: toplevel.cpp:782 msgid "Split" msgstr "Razdvoji" #: toplevel.cpp:786 msgid "Show two information panels" msgstr "Prikaži dva informaciona panela" #: toplevel.cpp:790 #, fuzzy msgid "Split Horizontal" msgstr "Razdvoji horizontalno" #: toplevel.cpp:795 #, fuzzy msgid "Change Split Orientation when main window is split." msgstr "Promeni orijentaciju podele kada se podeli glavni prozor." #: toplevel.cpp:803 msgid "Tip of the &Day..." msgstr "Savet &dana..." #: toplevel.cpp:804 msgid "Show \"Tip of the Day\"" msgstr "Prikaži „Savet dana“" #: toplevel.cpp:1007 toplevel.cpp:1056 msgid "" "cachegrind.out* callgrind.out*|Callgrind Profile Data\n" "*|All Files" msgstr "" "cachegrind.out* callgrind.out*|Profilišući podaci Callgrind-a\n" "*|Svi fajlovi" #: toplevel.cpp:1009 msgid "Select Callgrind Profile Data" msgstr "Izaberite profilišuće podatke Callgrind-a" #: toplevel.cpp:1058 msgid "Add Callgrind Profile Data" msgstr "Dodaj profilišuće podatke Callgrind-a" #: toplevel.cpp:1216 toplevel.cpp:1569 msgid "(Hidden)" msgstr "(Skriven)" #: toplevel.cpp:1621 msgid "Hide" msgstr "Sakrij" #: toplevel.cpp:1654 msgid "Show Absolute Cost" msgstr "Prikaži apsolutan trošak" #: toplevel.cpp:1657 msgid "Show Relative Cost" msgstr "Prikaži relativan trošak" #: toplevel.cpp:1688 msgid "Go Forward" msgstr "Idi napred" #: toplevel.cpp:1689 msgid "Go Up" msgstr "Idi gore" #: toplevel.cpp:1921 #, c-format msgid "Layout Count: %1" msgstr "Broj rasporeda: %1" #: toplevel.cpp:1928 msgid "No profile data file loaded." msgstr "Nije učitan nijedan fajl sa profilišućim podacima." #: toplevel.cpp:1937 msgid "Total %1 Cost: %2" msgstr "Ukupno %1 Trošak: %2" #: toplevel.cpp:1949 msgid "No event type selected" msgstr "Nije izabran tip događaja" #: toplevel.cpp:2194 toplevel.cpp:2230 toplevel.cpp:2266 msgid "(No Stack)" msgstr "(Nema steka)" #: toplevel.cpp:2200 msgid "(No next function)" msgstr "(Nema sledeće funkcije)" #: toplevel.cpp:2236 msgid "(No previous function)" msgstr "(Nema prethodne funkcije)" #: toplevel.cpp:2271 msgid "(No Function Up)" msgstr "(Nema funkcije gore)" #: tracedata.cpp:153 msgid "Abstract Item" msgstr "Apstraktna stavka" #: tracedata.cpp:154 msgid "Cost Item" msgstr "Troškovna stavka" #: tracedata.cpp:155 msgid "Part Source Line" msgstr "Deo izvornih linija" #: tracedata.cpp:156 msgid "Source Line" msgstr "Izvorna linija" #: tracedata.cpp:157 msgid "Part Line Call" msgstr "Deo linijskih poziva" #: tracedata.cpp:158 msgid "Line Call" msgstr "Linijski poziv" #: tracedata.cpp:159 msgid "Part Jump" msgstr "Deo skokova" #: tracedata.cpp:160 msgid "Jump" msgstr "Skok" #: tracedata.cpp:161 msgid "Part Instruction" msgstr "Deo instrukcija" #: tracedata.cpp:162 msgid "Instruction" msgstr "Instrukcija" #: tracedata.cpp:163 msgid "Part Instruction Jump" msgstr "Deo skokova instrukcija" #: tracedata.cpp:164 msgid "Instruction Jump" msgstr "Skok instrukcije" #: tracedata.cpp:165 msgid "Part Instruction Call" msgstr "Deo poziva instrukcija" #: tracedata.cpp:166 msgid "Instruction Call" msgstr "Poziv instrukcije" #: tracedata.cpp:167 msgid "Part Call" msgstr "Deo poziva" #: tracedata.cpp:168 msgid "Call" msgstr "Poziv" #: tracedata.cpp:169 msgid "Part Function" msgstr "Deo funkcija" #: tracedata.cpp:170 msgid "Function Source File" msgstr "Izvorni fajl funkcije" #: dumpselectionbase.ui:300 dumpselectionbase.ui:939 #: functionselectionbase.ui:136 stackselectionbase.ui:64 tracedata.cpp:171 #, no-c-format msgid "Function" msgstr "Funkcija" #: tracedata.cpp:172 msgid "Function Cycle" msgstr "Ciklus funkcije" #: tracedata.cpp:173 msgid "Part Class" msgstr "Deo klasa" #: tracedata.cpp:174 msgid "Class" msgstr "Klasa" #: tracedata.cpp:175 msgid "Part Source File" msgstr "Deo izvornih fajlova" #: tracedata.cpp:176 msgid "Source File" msgstr "Izvorni fajl" #: tracedata.cpp:177 msgid "Part ELF Object" msgstr "Deo ELF objekata" #: tracedata.cpp:178 msgid "ELF Object" msgstr "ELF objekat" #: tracedata.cpp:180 msgid "Program Trace" msgstr "Trag programa" #: tracedata.cpp:241 msgid "%1 from %2" msgstr "%1 od %2" #: tracedata.cpp:2583 msgid "(no caller)" msgstr "(nema pozivača)" #: tracedata.cpp:2590 tracedata.cpp:2609 msgid "%1 via %2" msgstr "%1 preko %2" #: tracedata.cpp:2599 msgid "(no callee)" msgstr "(nema pozvanog)" #: tracedata.cpp:4467 msgid "(not found)" msgstr "(nije nađeno)" #: tracedata.cpp:5017 msgid "Recalculating Function Cycles..." msgstr "Ponovo računam cikluse funkcija..." #: traceitemview.cpp:53 msgid "No description available" msgstr "Opis nije dostupan" #: treemap.cpp:1281 #, c-format msgid "Text %1" msgstr "Tekst %1" #: treemap.cpp:2809 msgid "Recursive Bisection" msgstr "Rekurzivna bisekcija" #: treemap.cpp:2810 msgid "Columns" msgstr "Kolone" #: treemap.cpp:2811 msgid "Rows" msgstr "Vrste" #: treemap.cpp:2812 msgid "Always Best" msgstr "Uvek najbolje" #: treemap.cpp:2813 msgid "Best" msgstr "Najbolje" #: treemap.cpp:2814 msgid "Alternate (V)" msgstr "Alternativno (U)" #: treemap.cpp:2815 msgid "Alternate (H)" msgstr "Alternativno (V)" #: treemap.cpp:2816 #, fuzzy msgid "Horizontal" msgstr "Razdvoji horizontalno" #: treemap.cpp:2817 msgid "Vertical" msgstr "" #: treemap.cpp:2872 msgid "Nesting" msgstr "Gnežđenje" #: treemap.cpp:2874 #, fuzzy msgid "Border" msgstr "Ivica 0" #: treemap.cpp:2875 msgid "Correct Borders Only" msgstr "Samo ispravne ivice" #: treemap.cpp:2877 treemap.cpp:2878 treemap.cpp:2879 treemap.cpp:2880 #, c-format msgid "Width %1" msgstr "Širina %1" #: treemap.cpp:2902 msgid "Visible" msgstr "Vidljivo" #: treemap.cpp:2903 msgid "Take Space From Children" msgstr "Uzmi prostor od dece" #: treemap.cpp:2905 msgid "Top Left" msgstr "Gore levo" #: treemap.cpp:2906 msgid "Top Center" msgstr "Gore u sredini" #: treemap.cpp:2907 msgid "Top Right" msgstr "Gore desno" #: treemap.cpp:2909 msgid "Bottom Center" msgstr "Dole u sredini" #: treemap.cpp:2910 msgid "Bottom Right" msgstr "Dole desno" #: treemap.cpp:2987 msgid "No %1 Limit" msgstr "Nema ograničenja %1" #: treemap.cpp:3056 treemap.cpp:3067 #, c-format msgid "" "_n: 1 Pixel\n" "%n Pixels" msgstr "" "%n piksel\n" "%n piksela\n" "%n piksela" #: treemap.cpp:3073 msgid "Halve Area Limit (to %1)" msgstr "Prepolovi ograničenje oblasti (na %1)" #: treemap.cpp:3118 #, c-format msgid "Depth %1" msgstr "Dubina %1" #: treemap.cpp:3122 msgid "Decrement (to %1)" msgstr "Opadanje (do %1)" #: treemap.cpp:3124 msgid "Increment (to %1)" msgstr "Rast (do %1)" #: configdlgbase.ui:16 #, fuzzy, no-c-format msgid "Configuration" msgstr "Podešavanja KCachegrind-a" #: configdlgbase.ui:37 #, no-c-format msgid "General" msgstr "Opšte" #: configdlgbase.ui:69 #, no-c-format msgid "Truncated when more/longer than:" msgstr "Skraćeno ako je više/duže od:" #: configdlgbase.ui:77 #, no-c-format msgid "Precision of percentage values:" msgstr "Preciznost procentualnih vrednosti:" #: configdlgbase.ui:85 #, no-c-format msgid "Symbols in tooltips and context menus" msgstr "Simboli u oblačićima i kontekstnim menijima" #: configdlgbase.ui:141 #, no-c-format msgid "Maximum number of items in lists:" msgstr "Najveći broj stavki u listama:" #: configdlgbase.ui:162 #, no-c-format msgid "Cost Item Colors" msgstr "Boje troškovnih stavki" #: configdlgbase.ui:254 #, no-c-format msgid "Object:" msgstr "Objekat:" #: configdlgbase.ui:262 #, no-c-format msgid "Class:" msgstr "Klasa:" #: configdlgbase.ui:310 #, no-c-format msgid "File:" msgstr "Fajl:" #: configdlgbase.ui:376 #, no-c-format msgid "Annotations" msgstr "Pribeleške" #: configdlgbase.ui:395 #, no-c-format msgid "Context lines in annotations:" msgstr "Kontekstne linije u pribeleškama:" #: configdlgbase.ui:423 #, no-c-format msgid "Source Folders" msgstr "Izvorne fascikle" #: configdlgbase.ui:454 #, no-c-format msgid "Object / Related Source Base" msgstr "Objekat / odgovarajuća izvorna baza" #: configdlgbase.ui:483 #, no-c-format msgid "Add..." msgstr "Dodaj..." #: configdlgbase.ui:508 #, no-c-format msgid "Delete" msgstr "" #: configdlgbase.ui:585 #, no-c-format msgid "&OK" msgstr "" #: configdlgbase.ui:596 #, no-c-format msgid "&Cancel" msgstr "" #: dumpselectionbase.ui:32 #, no-c-format msgid "Target" msgstr "Cilj" #: dumpselectionbase.ui:54 #, no-c-format msgid "Time" msgstr "Vreme" #: dumpselectionbase.ui:65 #, no-c-format msgid "Path" msgstr "Putanja" #: dumpselectionbase.ui:87 #, fuzzy, no-c-format msgid "Options" msgstr "Opcija" #: dumpselectionbase.ui:106 #, no-c-format msgid "Target command:" msgstr "Ciljna naredba:" #: dumpselectionbase.ui:119 #, no-c-format msgid "Profiler options:" msgstr "Opcije profilisanja:" #: dumpselectionbase.ui:125 #, no-c-format msgid "Option" msgstr "Opcija" #: dumpselectionbase.ui:136 dumpselectionbase.ui:688 #, no-c-format msgid "Value" msgstr "Vrednost" #: dumpselectionbase.ui:147 #, no-c-format msgid "Trace" msgstr "Trag" #: dumpselectionbase.ui:160 dumpselectionbase.ui:768 #, no-c-format msgid "Jumps" msgstr "Skokovi" #: dumpselectionbase.ui:174 #, no-c-format msgid "Instructions" msgstr "Instrukcije" #: dumpselectionbase.ui:189 dumpselectionbase.ui:783 #, no-c-format msgid "Events" msgstr "Događaji" #: dumpselectionbase.ui:202 #, no-c-format msgid "Full Cache" msgstr "Pun keš" #: dumpselectionbase.ui:216 #, no-c-format msgid "Custom" msgstr "Proizvoljno" #: dumpselectionbase.ui:231 #, no-c-format msgid "Collect" msgstr "Sakupi" #: dumpselectionbase.ui:244 #, no-c-format msgid "At Startup" msgstr "Pri pokretanju" #: dumpselectionbase.ui:258 #, no-c-format msgid "While In" msgstr "Dok je u" #: dumpselectionbase.ui:273 #, no-c-format msgid "Skip" msgstr "Preskoči" #: dumpselectionbase.ui:286 #, no-c-format msgid "PLT" msgstr "PLT" #: dumpselectionbase.ui:315 #, no-c-format msgid "Dump Profile" msgstr "Izbaci profil" #: dumpselectionbase.ui:328 #, no-c-format msgid "Every BBs" msgstr "Svakih BBs" #: dumpselectionbase.ui:342 dumpselectionbase.ui:384 #, no-c-format msgid "On Entering" msgstr "Pri ulasku" #: dumpselectionbase.ui:356 #, no-c-format msgid "On Leaving" msgstr "Pri izlasku" #: dumpselectionbase.ui:371 #, no-c-format msgid "Zero Events" msgstr "Nulti događaji" #: dumpselectionbase.ui:399 #, no-c-format msgid "Separate" msgstr "Razdvojeni" #: dumpselectionbase.ui:412 #, no-c-format msgid "Threads" msgstr "Niti" #: dumpselectionbase.ui:426 #, no-c-format msgid "Recursions" msgstr "Rekurzije" #: dumpselectionbase.ui:440 #, no-c-format msgid "Call Chain" msgstr "Lanac poziva" #: dumpselectionbase.ui:470 #, no-c-format msgid "Custom profiler options:" msgstr "Posebne opcije profilisanja:" #: dumpselectionbase.ui:508 #, no-c-format msgid "Run New Profile" msgstr "Pokreni novi profil" #: dumpselectionbase.ui:520 #, no-c-format msgid "Info" msgstr "Info" #: dumpselectionbase.ui:531 #, no-c-format msgid "Dump reason:" msgstr "Razlog izbačaja:" #: dumpselectionbase.ui:544 #, no-c-format msgid "Event summary:" msgstr "Sažetak događaja:" #: dumpselectionbase.ui:561 #, no-c-format msgid "Sum" msgstr "Zbir" #: dumpselectionbase.ui:579 #, no-c-format msgid "Miscellaneous:" msgstr "Razno:" #: dumpselectionbase.ui:617 #, no-c-format msgid "Show" msgstr "Prikaži" #: dumpselectionbase.ui:625 #, no-c-format msgid "Compare" msgstr "Uporedi" #: dumpselectionbase.ui:637 #, no-c-format msgid "State" msgstr "Stanje" #: dumpselectionbase.ui:656 #, no-c-format msgid "Update" msgstr "Ažuriraj" #: dumpselectionbase.ui:664 #, no-c-format msgid "Every [s]:" msgstr "Svakih [s]:" #: dumpselectionbase.ui:677 #, no-c-format msgid "Counter" msgstr "Brojač" #: dumpselectionbase.ui:699 #, no-c-format msgid "Dumps Done" msgstr "Izbačaji su gotovi" #: dumpselectionbase.ui:713 #, no-c-format msgid "Is Collecting" msgstr "Sakuplja" #: dumpselectionbase.ui:727 #, no-c-format msgid "Executed" msgstr "Izvršeno" #: dumpselectionbase.ui:740 #, no-c-format msgid "Basic Blocks" msgstr "Osnovni blokovi" #: dumpselectionbase.ui:796 #, no-c-format msgid "Ir" msgstr "Ir" #: dumpselectionbase.ui:811 #, no-c-format msgid "Distinct" msgstr "Posebno" #: dumpselectionbase.ui:838 #, no-c-format msgid "Functions" msgstr "Funkcije" #: dumpselectionbase.ui:852 #, no-c-format msgid "Contexts" msgstr "Konteksti" #: dumpselectionbase.ui:890 #, no-c-format msgid "Stack trace:" msgstr "Trag steka:" #: dumpselectionbase.ui:898 #, no-c-format msgid "Sync." msgstr "Sinh." #: dumpselectionbase.ui:976 #, no-c-format msgid "Start" msgstr "Pokreni" #: dumpselectionbase.ui:1001 #, no-c-format msgid "Zero" msgstr "Nula" #: dumpselectionbase.ui:1009 #, no-c-format msgid "Dump" msgstr "Izbaci" #: dumpselectionbase.ui:1021 #, no-c-format msgid "Messages" msgstr "Poruke" #: dumpselectionbase.ui:1045 #, no-c-format msgid "Kill Run" msgstr "Obustavi rad" #: dumpselectionbase.ui:1070 #, no-c-format msgid "Clear" msgstr "" #: functionselectionbase.ui:41 #, no-c-format msgid "&Search:" msgstr "&Traži:" #: functionselectionbase.ui:73 #, no-c-format msgid "Group" msgstr "Grupa" #: partselectionbase.ui:60 #, no-c-format msgid "(no trace parts)" msgstr "(nema delova traga)" #: stackselectionbase.ui:16 #, no-c-format msgid "Stack Selection" msgstr "Izbor steka" #: stackselectionbase.ui:42 #, no-c-format msgid "Cost2" msgstr "Trošak2" #: tdecachegrindui.rc:4 #, fuzzy, no-c-format msgid "&File" msgstr "Fajl:" #: tdecachegrindui.rc:10 #, no-c-format msgid "&View" msgstr "" #: tdecachegrindui.rc:15 #, no-c-format msgid "&Layout" msgstr "&Raspored" #: tdecachegrindui.rc:32 #, no-c-format msgid "Sidebars" msgstr "Bočne trake" #: tdecachegrindui.rc:41 #, fuzzy, no-c-format msgid "Main Toolbar" msgstr "Traka stanja" #: tdecachegrindui.rc:54 #, no-c-format msgid "State Toolbar" msgstr "Traka stanja" #: tips:3 msgid "" "

      ...that the What's This? help for every GUI widget\n" "in KCachegrind contains detailed usage information for this widget?\n" "It is highly recommended to read at least these help texts on first\n" "use. Request What's This? help by pressing\n" "Shift+F1 and clicking on the widget.

      \n" msgstr "" "

      ...da pomoć Šta je ovo? za svaku kontrolu GUI-ja\n" "u KCachegrind-u sadrži detaljne informacije o upotrebi?\n" "Preporučljivo je da pročitate barem ove tekstove pomoći pri prvoj\n" "upotrebi. Pomoć Šta je ovo? zahtevate pritiskom na\n" "Shift-F1 i klikom na kontrolu.

      \n" #: tips:13 msgid "" "

      ...that you can get profile information at instruction level\n" "with Calltree when you provide the option --dump-instr=yes?\n" "Use the Assembler View for the instruction annotations.\n" "

      \n" msgstr "" "

      ...da možete dobiti profilišuće informacije na nivou instrukcije\n" "pomoću Calltree-ja kada zadate opciju --dump-instr=yes?\n" "Koristite asemblerski prikaz za instrukcije sa pribeleškama.\n" "

      \n" #: tips:22 msgid "" "

      ...that you can use Alt-Left/Right keys of your keyboard to go\n" "back/forward in the active object history ?

      \n" msgstr "" "

      ...da možete koristiti strelice levo/desno na tastaturi da biste\n" "išli nazad/napred u istoriji aktivnih objekata?

      \n" #: tips:29 msgid "" "

      ...that you can navigate in the Callee/Caller Map View using\n" "arrow keys? Use Left/Right to change to siblings of the current\n" "item; use Up/Down to go one nesting level up/down. To select\n" "the current item, press Space, and to activate it, press Return.\n" "

      \n" msgstr "" "

      ...da se možete kretati u prikazu mape pozvanih/pozivača\n" "koristeći strelice na tastaturi? Koristite levo/desno da biste\n" "menjali između srodnika tekuće stavke, a gore/dole da biste išli\n" "jedan nivo ugnježdenja gore/dole. Da biste izabrali tekuću stavku,\n" "pritisnite Space, a da biste je aktivirali, Return.\n" "

      \n" #: tips:39 msgid "" "

      ...that you can navigate in the Call Graph View using\n" "arrow keys? Use Up/Down to go one calling level up/down, alternating\n" "between calls and functions. Use Left/Right to change to siblings of a " "current\n" "selected call. To activate the current item, press Return.\n" "

      \n" msgstr "" "

      ...da možete da se krećete kroz prikaz grafikona poziva\n" "koristeći strelice na tastaturi? Koristite gore/dole da biste išli\n" "jedan nivo poziva gore/dole, izmenjujući između poziva i funkcija.\n" "Koristite levo/desno da biste promenili na srodnike trenutno\n" "izabranog poziva. Da biste aktivirali tekuću stavku, pritisnite\n" "Return.

      \n" #: tips:49 msgid "" "

      ...that you can rapidly locate a function by entering part of its\n" "name (case-insensitive) into the edit line of the toolbar\n" "and hit return?

      \n" msgstr "" "

      ...da možete brzo locirati funkciju unosom dela njenog imena (ne\n" "razlikuju se velika i mala slova) u liniju za uređivanje na traci sa\n" "alatima i pritiskom na Return?

      \n" #: tips:57 msgid "" "

      ...that you can assign custom colors to \n" "ELF objects/C++ Classes/Source Files for graph coloring\n" "in Settings->Configure KCachegrind...?

      \n" msgstr "" "

      ...da možete dodeliti posebne boje \n" "ELF objektima/C++ klasama/izvornim fajlovima za bojenje\n" "grafikona u Postavke->Podesi KCachegrind...?

      \n" #: tips:65 msgid "" "

      ...that you can see if debug info is available for a selected \n" "function by looking at the location label in the Info tab or\n" "the source listing header in the source tab?

      \n" "

      There must be the name of the source file (with extension).\n" "If KCachegrind still doesn't show the source, make sure that you\n" "have added the directory of the source file to the\n" "Source Directories list in the configuration.\n" msgstr "" "

      ...da možete videti da li su informacije za ispravljanje grešaka \n" "dostupne za izabranu funkciju ako pogledate oznaku lokacije na \n" "jezičku informacija, ili zaglavlje listinga izvora na jezičku izvora?

      \n" "

      Tamo mora postojati ime izvornog fajla (sa nastavkom). \n" "Ako KCachegrind i dalje ne prikazuje izvor, uverite se da ste dodali \n" "direktorijum izvornog fajla u listu Izvorni direktorijumi u \n" "podešavanjima.\n" #: tips:77 msgid "" "

      ...that you can configure whether KCachgrind should\n" "show absolute event counts or relative ones (percentage display)?

      \n" msgstr "" "

      ...da možete da podesite da li će KCachgrind prikazivati apsolutne \n" "ili relativne brojeve događaja (procentualni prikaz)?

      \n" #: tips:84 msgid "" "

      ...that you can configure the maximum number of items\n" "for all function lists in KCachegrind? Limiting the number\n" "of items is done to get a fast reacting GUI. The last item in\n" "the list will show you the number of skipped functions, together\n" "with a cost condition for these skipped functions.

      \n" "

      To activate a function with small costs, search for it and select\n" "it in the flat profile. Selecting functions with small cost will\n" "temporarily add them to the flat profile list.

      \n" msgstr "" "

      ...da možete da podesite maksimalan broj stavki za sve liste\n" "funkcija u KCachegrind-u? Ovo ograničavanje se radi da bi GUI\n" "brže reagovao. Poslednja stavka u listi će vam prikazati broj\n" "preskočenih funkcija, zajedno sa troškovnim uslovom za te preskočene\n" "funkcije.

      \n" "

      Da biste aktivirali funkciju sa malim troškom, potražite je i\n" "izaberite u ravnom profilu. Izborom funkcije sa malim troškom,\n" "privremeno ćete je dodati u listu ravnog profila.

      \n" #: tips:97 msgid "" "

      ...that the Coverage tab - in contrast to the Call Lists tab -\n" "shows all functions that are calling the selected function\n" "(upper part) / are called by the selected function (bottom part),\n" "no matter how many function are between them on the stack?

      \n" "

      Examples:

      \n" "

      An entry in the upper list for function foo1() with a value of 50%\n" "with function bar() selected means that 50% of all the cost of function\n" "bar() happened while called from function foo1().

      \n" "

      An entry in the bottom list for function foo2() with a value of 50%\n" "with function bar() selected means that 50% of all the cost of function\n" "bar() happened while calling foo2() from bar().

      \n" msgstr "" "

      ...da jezičak „Pokrivenost“ — suprotno jezičku „Liste poziva“ —\n" "prikazuje sve funkcije koje pozivaju izabranu funkciju\n" "(gornji deo) ili su pozvane iz izabrane funkcije (donji deo), bez\n" "obzira koliko je funkcija između njih na steku?

      \n" "

      Primeri:

      \n" "

      Unos u gornjoj listi za funkciju foo1() sa vrednošću 50% sa\n" "izabranom funkcijom bar() znači da je 50% svih troškova funkcije\n" "bar() načinjeno dok je pozivana iz funkcije foo1().

      \n" "

      Unos u donjoj listi za funkciju foo2() sa vrednošću 50% sa\n" "izabranom funkcijom bar() znači da je 50% svih troškova funkcije\n" "bar() načinjeno kada se iz nje pozivala funkcija foo2().

      \n" #: tips:113 msgid "" "

      ...that waiting for the tool tip inside of a tree map\n" "shows the list of names of the nested rectangles the mouse\n" "pointer is over?

      \n" "

      Items from this list can be selected by pressing the right\n" "mouse button.

      \n" msgstr "" "

      ...da čekanjem oblačića unutar mape stabla dobijate listu\n" "imena ugnježdenih pravougaonika iznad kojih je strelica miša?

      \n" "

      Stavke u ovoj listi mogu biti izabrane pritiskom na desno\n" "dugme miša.

      \n" #: tips:123 msgid "" "

      ...that you can constrain the cost counts shown to only a\n" "few parts of the whole trace by selecting these parts in the\n" "\"Trace Selection\" Dockable?

      \n" "

      To generate multiple parts in a profiling run with\n" "cachegrind, use e.g. option --cachedumps=xxx for parts\n" "of a length of xxx basic blocks (A basic block is a run\n" "of not-branching assembler statements inside of your program\n" "code).

      \n" msgstr "" "

      ...da možete ograničiti prikaz troškova samo na nekoliko\n" "delova celog traga izborom tih delova u prozoru „Izbor traga“?

      \n" "

      Da biste generisali višestruke delove u jednom profilišućem\n" "prolazu cachegrind-om, upotrebite npr. opciju --cachedumps=xxx za\n" "delove dužine xxx osnovnih blokova (osnovni blok je prolaz negranajućih\n" "asemblerskih naredbi unutar vašeg programa).

      \n"
      Tip troškaRoditeljski trošak
      Kumulativno za funkcijuUkupno
      Sopstveno za funkcijuGrupa funkcija " "(*) / ukupno
      PozivKumulativno za funkciju
      Izvorna linijaKumulativno za funkciju