# Simplified Chinese translation for knetworkconf messages. # Copyright (C) 2006, Zhang Le # This file is distributed under the same license as the tdebase package. # Zhang Le , 2006. # msgid "" msgstr "" "Project-Id-Version: knetworkconf\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2014-11-05 10:17-0600\n" "PO-Revision-Date: 2006-05-04 19:05+0800\n" "Last-Translator: Zhang Le \n" "Language-Team: zh_CN \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: knetworkconf.cpp:66 msgid "Could not load network configuration information." msgstr "无法装入网络配置信息。" #: knetworkconf.cpp:67 msgid "Error Reading Configuration File" msgstr "读取配置文件时出错" #: knetworkconf.cpp:118 knetworkconf.cpp:756 msgid "Enabled" msgstr "已启用" #: knetworkconf.cpp:128 knetworkconf.cpp:770 msgid "Disabled" msgstr "已禁用" #: knetworkconf.cpp:137 knetworkconf.cpp:304 msgid "Manual" msgstr "手动" #: knetworkconf.cpp:158 msgid "" "The new configuration has not been saved.\n" "Do you want to apply changes before quitting?" msgstr "" "新配置尚未保存。\n" "您想在退出前应用更改吗?" #: knetworkconf.cpp:159 knetworkconf.cpp:831 knetworkconf.cpp:850 msgid "New Configuration Not Saved" msgstr "新配置尚未保存" #: knetworkconf.cpp:206 msgid "Edit Server" msgstr "编辑服务器" #: knetworkconf.cpp:233 #, c-format msgid "Configure Device %1" msgstr "配置设备 %1" #: knetworkconf.cpp:442 msgid "Could not open file '/etc/resolv.conf' for reading." msgstr "无法打开文件“/etc/resolv.conf”进行读取。" #: knetworkconf.cpp:443 msgid "Error Loading Config Files" msgstr "装入配置文件时出错" #: knetworkconf.cpp:590 msgid "The default Gateway IP address is invalid." msgstr "默认网关的 IP 地址无效。" #: kadddevicecontainer.cpp:129 kadddevicecontainer.cpp:132 #: kadddevicecontainer.cpp:135 kadddevicecontainer.cpp:138 #: kadddnsserverdlg.ui.h:42 kaddknownhostdlg.ui.h:25 knetworkconf.cpp:590 msgid "Invalid IP Address" msgstr "无效的 IP 地址" #: knetworkconf.cpp:681 msgid "Enabling interface %1" msgstr "启用接口 %1" #: knetworkconf.cpp:683 msgid "Disabling interface %1" msgstr "禁用接口 %1" #: knetworkconf.cpp:717 msgid "" "Could not launch backend to change network device state. You will have to do it " "manually." msgstr "无法启动后端来更改网络设备状态。您需要手动完成。" #: knetworkconf.cpp:738 msgid "" "There was an error changing the device's state. You will have to do it " "manually." msgstr "更改设备状态时出错。您需要手动完成。" #: knetworkconf.cpp:739 msgid "Could Not Change Device State" msgstr "无法更改设备状态" #: knetworkconf.cpp:830 knetworkconf.cpp:849 msgid "" "The new configuration has not been saved.\n" "Apply changes?" msgstr "" "新配置尚未保存。\n" "应用更改吗?" #. i18n: file kaddknownhostdlg.ui line 16 #: knetworkconf.cpp:867 rc.cpp:199 #, no-c-format msgid "Add New Static Host" msgstr "添加新静态主机" #: knetworkconf.cpp:900 msgid "Edit Static Host" msgstr "编辑静态主机" #: knetworkconf.cpp:1038 msgid "Could not load the selected Network Profile." msgstr "无法装入选中的网络配置文件。" #: knetworkconf.cpp:1039 msgid "Error Reading Profile" msgstr "读取配置文件时出错" #: knetworkconf.cpp:1062 msgid "Create New Network Profile" msgstr "创建新网络配置文件" #: knetworkconf.cpp:1063 msgid "Name of new profile:" msgstr "新配置文件名称:" #: knetworkconf.cpp:1092 msgid "There is already another profile with that name." msgstr "已经存在同名的配置文件。" #. i18n: file kadddevicedlg.ui line 44 #: rc.cpp:3 #, no-c-format msgid "Configure Interface" msgstr "配置接口" #. i18n: file kadddevicedlg.ui line 64 #: rc.cpp:6 #, no-c-format msgid "TCP/IP Address" msgstr "TCP/IP 地址" #. i18n: file kadddevicedlg.ui line 93 #: rc.cpp:9 #, no-c-format msgid "dhcp" msgstr "dhcp" #. i18n: file kadddevicedlg.ui line 98 #: rc.cpp:12 #, no-c-format msgid "bootp" msgstr "bootp" #. i18n: file kadddevicedlg.ui line 105 #: rc.cpp:15 rc.cpp:18 #, no-c-format msgid "The boot protocol this network device should use" msgstr "此网络设备应使用的启动协议" #. i18n: file kadddevicedlg.ui line 133 #: rc.cpp:21 #, no-c-format msgid "Manual:" msgstr "手动:" #. i18n: file kadddevicedlg.ui line 136 #: rc.cpp:24 #, no-c-format msgid "Use a static IP address. Use the fields below to enter the values" msgstr "使用静态 IP 地址。使用下面的输入框输入值" #. i18n: file kadddevicedlg.ui line 140 #: rc.cpp:27 #, no-c-format msgid "" "

Sets this interface to use static IP settings.

\n" "

In this case, please use the fields below to enter the desired values " "manually.

" msgstr "" "

将此设备设定为使用静态 IP 设置。

\n" "

在这种情况下,请使用下面的输入框来手动输入您想要的值。

" #. i18n: file kadddevicedlg.ui line 148 #: rc.cpp:31 #, no-c-format msgid "Automatic:" msgstr "自动:" #. i18n: file kadddevicedlg.ui line 151 #: rc.cpp:34 #, no-c-format msgid "Use a dynamic IP address" msgstr "使用动态 IP 地址" #. i18n: file kadddevicedlg.ui line 156 #: rc.cpp:37 #, no-c-format msgid "" "

Using an dynamic IP address causes this device to get a free IP address " "automatically.

\n" "

The interface will try to contact an DHCP- or BOOTP-Server during the boot " "process.

\n" "

Rendevouz is not supported yet.

" msgstr "" "

使用动态 IP 地址将使得此设备自动获得一个空闲的 IP 地址。

\n" "

接口在启动过程中会尝试连接一个 DHCP 或者 BOOTP 服务器。

\n" "

暂不支持 Rendevouz。

" #. i18n: file kadddevicedlg.ui line 184 #: rc.cpp:42 #, no-c-format msgid "Activate when the computer starts" msgstr "当计算机启动时激活" #. i18n: file kadddevicedlg.ui line 187 #: rc.cpp:45 #, no-c-format msgid "Ensures that this interface gets activated during boot time" msgstr "保证此接口在启动时被激活" #. i18n: file kadddevicedlg.ui line 191 #: rc.cpp:48 #, no-c-format msgid "" "

Ensures that this interface gets activated during boot time.

\n" "

Otherwise, you will have to active the interface manually after you have " "logged in after the boot process.

" msgstr "" "

保证此接口在启动时被激活。

\n" "

否则,您需要在启动过程后登录再手工激活此接口。

" #. i18n: file kadddevicedlg.ui line 197 #: rc.cpp:52 #, no-c-format msgid "255.255.255.0" msgstr "255.255.255.0" #. i18n: file kadddevicedlg.ui line 202 #: rc.cpp:55 #, no-c-format msgid "255.255.0.0" msgstr "255.255.0.0" #. i18n: file kadddevicedlg.ui line 207 #: rc.cpp:58 #, no-c-format msgid "255.0.0.0" msgstr "255.0.0.0" #. i18n: file kadddevicedlg.ui line 212 #: rc.cpp:61 #, no-c-format msgid "255.255.255.128" msgstr "255.255.255.128" #. i18n: file kadddevicedlg.ui line 217 #: rc.cpp:64 #, no-c-format msgid "255.255.255.192" msgstr "255.255.255.192" #. i18n: file kadddevicedlg.ui line 222 #: rc.cpp:67 #, no-c-format msgid "255.255.255.240" msgstr "255.255.255.240" #. i18n: file kadddevicedlg.ui line 227 #: rc.cpp:70 #, no-c-format msgid "255.255.255.248" msgstr "255.255.255.248" #. i18n: file kadddevicedlg.ui line 237 #: rc.cpp:73 #, no-c-format msgid "Subnetmask of the network device" msgstr "此网络设备的子网掩码" #. i18n: file kadddevicedlg.ui line 242 #: rc.cpp:76 #, no-c-format msgid "" "

Please enter the desired subnetmask for the interface here.

\n" "

For small private networks, 255.255.255.0 will most often be a reasonable " "default value.

\n" "

This field will change from a popup box to a combo box as soon as you enable " "the advanced settings below.

" msgstr "" "

请在此输入接口所需要的子网掩码。

\n" "

对于小的私有网络,绝大多数情况下取 255.255.255.0 作为默认值即可。

\n" "

如果您启用了下面的高级设置,此字段将会从一个下拉框变成一个组合框。

" #. i18n: file kadddevicedlg.ui line 284 #: rc.cpp:81 #, no-c-format msgid "Netmask:" msgstr "网络掩码:" #. i18n: file kadddevicedlg.ui line 287 #: rc.cpp:84 rc.cpp:87 #, no-c-format msgid "" "The netmask defines a range of IP numbers which will build a subnet inside the " "network." msgstr "网络掩码定义了一段 IP 地址,这些 IP 地址将构成网络里的一个子网。" #. i18n: file kadddevicedlg.ui line 301 #: rc.cpp:90 #, no-c-format msgid "IP address for the network device" msgstr "网络设备的 IP 地址" #. i18n: file kadddevicedlg.ui line 311 #: rc.cpp:93 #, no-c-format msgid "" "

Here you should enter the IP address for the network interface.

\n" "

Please note: If your network is connected to the internet, you should only " "enter IP addresses you have been given by your provider.

\n" "

Otherwise, you should enter one of the IP addresses which are explicitly " "reserved for private use.

\n" "

Most small private networks use class C networks, which allow up to 255 " "computers in your network. So simply use addresses like 192.168.1.1, " "192.168.1.2, 192.168.1.171 and so on for your computers.

\n" "

Cass C networks: 192.168.0.0 to 192.168.255.25, for example 192.168.0.13.

" "\n" "

Class B networks: 172.16.0.0 to 172.31.255.255, for example 172.28.2.5

\n" "

Class A networks: 10.0.0.0 to 10.255.255.255, for example 10.5.12.14

\n" "

Please ensure that all IP addresses you give to your computers are unique; " "you will have many problems if the same address is assigned to more than one " "network device.

" msgstr "" "

您应在此输入网卡接口的 IP 地址。

\n" "

请注意:如果您的网络是连到 Internet 的,您应该只输入网络供应商所提供的 IP 地址。

\n" "

否则,您应该在此输入一个私有网络 IP 地址。

\n" "

大多数私有网络使用 C 类网络,可以容纳多至 255 台主机。所以您的计算机使用像 " "192.168.1.1、192.168.1.2、192.168.1.171 这样的地址就行了。

\n" "

C 类网络:192.168.0.0 到 192.168.255.255,比如 192.168.0.13

\n" "

B 类网络:172.16.0.0 到 172.31.255.255,比如 172.28.2.5

\n" "

A 类网络:10.0.0.0 到 10.255.255.255,比如 10.5.12.14

\n" "

请确保您为您的计算机设定的IP地址都是唯一的;如果将同一个地址指派给了多个网络设备的话,您会有很多麻烦。

" #. i18n: file kadddevicedlg.ui line 336 #: rc.cpp:103 rc.cpp:184 rc.cpp:202 rc.cpp:286 #, no-c-format msgid "IP address:" msgstr "IP 地址:" #. i18n: file kadddevicedlg.ui line 339 #: rc.cpp:106 rc.cpp:109 rc.cpp:142 rc.cpp:145 #, no-c-format msgid "" "An IP address is an unique identifier of a networking device in an TCP/IP " "network" msgstr "IP 地址是 TCP/IP 网络中网络设备的唯一标识符" #. i18n: file kadddevicedlgextension.ui line 16 #: rc.cpp:112 #, no-c-format msgid "Advanced Options" msgstr "高级选项" #. i18n: file kadddevicedlgextension.ui line 27 #: rc.cpp:115 #, no-c-format msgid "Advanced Device Information" msgstr "高级设备信息" #. i18n: file kadddevicedlgextension.ui line 30 #: rc.cpp:118 #, no-c-format msgid "Set advanced setting for the network device" msgstr "设置网络设备的高级设置" #. i18n: file kadddevicedlgextension.ui line 41 #: rc.cpp:121 #, no-c-format msgid "Description:" msgstr "描述:" #. i18n: file kadddevicedlgextension.ui line 44 #: rc.cpp:124 rc.cpp:133 #, no-c-format msgid "IP address of the network device" msgstr "网络设备的 IP 地址" #. i18n: file kadddevicedlgextension.ui line 55 #: rc.cpp:127 rc.cpp:130 #, no-c-format msgid "Simply enter a short human-readable description for this device" msgstr "为此设备输入一段简短的描述" #. i18n: file kadddevicedlgextension.ui line 72 #: rc.cpp:136 #, no-c-format msgid "" "The Broadcast is a special address. All devices of a network respond if " "packages are sent to this address." msgstr "广播地址是一个特殊的地址。如果有数据包发到此地址,网络中的全部设备都会响应。" #. i18n: file kadddevicedlgextension.ui line 80 #: rc.cpp:139 #, no-c-format msgid "Gateway:" msgstr "网关:" #. i18n: file kadddevicedlgextension.ui line 100 #: rc.cpp:148 #, no-c-format msgid "Default gateway for the network device" msgstr "网络设备的默认网关" #. i18n: file kadddevicedlgextension.ui line 103 #: rc.cpp:151 #, no-c-format msgid "" "

Here you should enter the default gateway for the network device.

" msgstr "

在此输入网络设备的默认网关。

" #. i18n: file kadddevicedlgextension.ui line 111 #: rc.cpp:154 #, no-c-format msgid "Broadcast:" msgstr "广播:" #. i18n: file kadddevicewifiext.ui line 18 #: rc.cpp:157 rc.cpp:160 #, no-c-format msgid "Wireless Settings" msgstr "无线设置" #. i18n: file kadddevicewifiext.ui line 43 #: rc.cpp:163 #, no-c-format msgid "WEP key:" msgstr "WEP 密钥:" #. i18n: file kadddevicewifiext.ui line 61 #: rc.cpp:166 #, no-c-format msgid "ESSID:" msgstr "ESSID:" #. i18n: file kadddevicewifiext.ui line 69 #: rc.cpp:169 #, no-c-format msgid "Key type:" msgstr "密钥类型:" #. i18n: file kadddevicewifiext.ui line 75 #: rc.cpp:172 #, no-c-format msgid "ASCII" msgstr "ASCII" #. i18n: file kadddevicewifiext.ui line 80 #: rc.cpp:175 #, no-c-format msgid "Hexadecimal" msgstr "十六进制" #. i18n: file kadddnsserverdlg.ui line 28 #: rc.cpp:178 #, no-c-format msgid "Add New DNS Server" msgstr "添加新 DNS 服务器" #. i18n: file kadddnsserverdlg.ui line 59 #: rc.cpp:181 #, no-c-format msgid "IP address of the new DNS server" msgstr "新 DNS 服务器的 IP 地址" #. i18n: file kadddnsserverdlg.ui line 92 #: rc.cpp:187 #, no-c-format msgid "&Add" msgstr "添加(&A)" #. i18n: file kadddnsserverdlg.ui line 95 #: rc.cpp:190 #, no-c-format msgid "Add the server to the list" msgstr "将服务器添加到列表" #. i18n: file kadddnsserverdlg.ui line 106 #: rc.cpp:196 #, no-c-format msgid "Forget it" msgstr "放弃" #. i18n: file kaddknownhostdlg.ui line 154 #: rc.cpp:211 rc.cpp:325 #, no-c-format msgid "Aliases" msgstr "别名" #. i18n: file kaddknownhostdlg.ui line 184 #: rc.cpp:214 rc.cpp:310 rc.cpp:328 #, no-c-format msgid "&Add..." msgstr "添加(&A)..." #. i18n: file kaddknownhostdlg.ui line 201 #: rc.cpp:217 rc.cpp:313 rc.cpp:331 #, no-c-format msgid "&Edit..." msgstr "编辑(&E)..." #. i18n: file kdetectdistrodlg.ui line 16 #: rc.cpp:223 #, no-c-format msgid "Detecting Your Current Platform" msgstr "检测您目前的平台" #. i18n: file kdetectdistrodlg.ui line 60 #: rc.cpp:226 #, no-c-format msgid "Please wait while detecting your current platform..." msgstr "请稍候,正在检测您目前的平台..." #. i18n: file kinterfaceupdowndlg.ui line 16 #: rc.cpp:229 #, no-c-format msgid "Changing Interface State" msgstr "更改接口状态" #. i18n: file kinterfaceupdowndlg.ui line 64 #: rc.cpp:232 #, no-c-format msgid "Bringing up interface eth0..." msgstr "正在启用接口 eth0..." #. i18n: file knetworkconfdlg.ui line 36 #: rc.cpp:235 #, no-c-format msgid "Network Settings" msgstr "网络设置" #. i18n: file knetworkconfdlg.ui line 42 #: rc.cpp:238 #, no-c-format msgid "Configure your TCP/IP settings" msgstr "配置您的 TCP/IP 设置" #. i18n: file knetworkconfdlg.ui line 45 #: rc.cpp:241 #, no-c-format msgid "Change TCP/IP settings" msgstr "更改 TCP/IP 设置" #. i18n: file knetworkconfdlg.ui line 66 #: rc.cpp:244 #, no-c-format msgid "Network Interfaces" msgstr "网络接口" #. i18n: file knetworkconfdlg.ui line 85 #: rc.cpp:247 #, no-c-format msgid "Available Network Interfaces" msgstr "可用的网络接口" #. i18n: file knetworkconfdlg.ui line 110 #: rc.cpp:250 #, no-c-format msgid "Interface" msgstr "接口" #. i18n: file knetworkconfdlg.ui line 121 #: rc.cpp:253 rc.cpp:322 #, no-c-format msgid "IP Address" msgstr "IP 地址" #. i18n: file knetworkconfdlg.ui line 132 #: rc.cpp:256 #, no-c-format msgid "Protocol" msgstr "协议" #. i18n: file knetworkconfdlg.ui line 143 #: rc.cpp:259 #, no-c-format msgid "State" msgstr "状态" #. i18n: file knetworkconfdlg.ui line 154 #: rc.cpp:262 #, no-c-format msgid "Comment" msgstr "注释" #. i18n: file knetworkconfdlg.ui line 175 #: rc.cpp:265 #, no-c-format msgid "List of configured network devices" msgstr "已配置的网络设备列表" #. i18n: file knetworkconfdlg.ui line 194 #: rc.cpp:268 #, no-c-format msgid "Configure Interface..." msgstr "配置接口..." #. i18n: file knetworkconfdlg.ui line 197 #: rc.cpp:271 #, no-c-format msgid "Change the settings of the selected device" msgstr "更改选中设备的设置" #. i18n: file knetworkconfdlg.ui line 208 #: rc.cpp:274 #, no-c-format msgid "Enable Interface" msgstr "启用接口" #. i18n: file knetworkconfdlg.ui line 219 #: rc.cpp:277 #, no-c-format msgid "Disable Interface" msgstr "禁用接口" #. i18n: file knetworkconfdlg.ui line 248 #: rc.cpp:280 #, no-c-format msgid "Routes" msgstr "路由" #. i18n: file knetworkconfdlg.ui line 265 #: rc.cpp:283 #, no-c-format msgid "Default Gateway" msgstr "默认网关" #. i18n: file knetworkconfdlg.ui line 348 #: rc.cpp:289 #, no-c-format msgid "Default Gateway IP address" msgstr "默认网关 IP 地址" #. i18n: file knetworkconfdlg.ui line 373 #: rc.cpp:292 #, no-c-format msgid "Device:" msgstr "设备:" #. i18n: file knetworkconfdlg.ui line 401 #: rc.cpp:295 #, no-c-format msgid "Network device where to send packets" msgstr "数据包发送目的网络设备" #. i18n: file knetworkconfdlg.ui line 432 #: rc.cpp:298 #, no-c-format msgid "Domain Name System" msgstr "域名系统" #. i18n: file knetworkconfdlg.ui line 443 #: rc.cpp:301 #, no-c-format msgid "Domain Name Servers" msgstr "域名服务器" #. i18n: file knetworkconfdlg.ui line 499 #: rc.cpp:304 #, no-c-format msgid "Move up the selected server on the list (higher priority)" msgstr "将列表中选中的服务器上移(高优先级)" #. i18n: file knetworkconfdlg.ui line 513 #: rc.cpp:307 #, no-c-format msgid "Move down the selected server on the list (less priority)" msgstr "将列表中选中的服务器下移(低优先级)" #. i18n: file knetworkconfdlg.ui line 637 #: rc.cpp:319 #, no-c-format msgid "Static Hosts" msgstr "静态主机" #. i18n: file knetworkconfdlg.ui line 738 #: rc.cpp:337 #, no-c-format msgid "Host name:" msgstr "主机名:" #. i18n: file knetworkconfdlg.ui line 762 #: rc.cpp:340 #, no-c-format msgid "Domain name:" msgstr "域名:" #. i18n: file knetworkconfdlg.ui line 772 #: rc.cpp:343 #, no-c-format msgid "Network Profiles" msgstr "网络配置文件" #. i18n: file knetworkconfdlg.ui line 783 #: rc.cpp:346 #, no-c-format msgid "Available Network Profiles" msgstr "可用的网络配置文件" #. i18n: file knetworkconfdlg.ui line 792 #: rc.cpp:349 #, no-c-format msgid "Name" msgstr "名称" #. i18n: file knetworkconfdlg.ui line 821 #: rc.cpp:352 #, no-c-format msgid "&Load Selected" msgstr "装入选中(&L)" #. i18n: file knetworkconfdlg.ui line 829 #: rc.cpp:355 #, no-c-format msgid "&Save Selected" msgstr "保存选中(&S)" #. i18n: file knetworkconfdlg.ui line 837 #: rc.cpp:358 #, no-c-format msgid "&Create New..." msgstr "创建(&C)..." #. i18n: file knetworkconfdlg.ui line 845 #: rc.cpp:361 #, no-c-format msgid "&Delete Selected" msgstr "删除选中(&D)" #. i18n: file kreloadnetworkdlg.ui line 28 #: knetworkconfigparser.cpp:303 rc.cpp:364 #, no-c-format msgid "Reloading Network" msgstr "重新装入网络" #. i18n: file kreloadnetworkdlg.ui line 112 #: rc.cpp:370 #, no-c-format msgid "" "Please wait while the network is reloaded so\n" "the changes can take effect." msgstr "请稍候,正在重新装入网络,以便让更改生效。" #. i18n: file tdeselectdistrodlg.ui line 16 #: rc.cpp:374 #, no-c-format msgid "Unsupported Platform" msgstr "不支持的平台" #. i18n: file tdeselectdistrodlg.ui line 69 #: rc.cpp:383 #, no-c-format msgid "Do not ask again" msgstr "不要再次询问" #. i18n: file tdeselectdistrodlg.ui line 94 #: rc.cpp:386 #, no-c-format msgid "" "

Your Platform is Not Supported

" "
" msgstr "" "

您的平台暂不支持" #. i18n: file tdeselectdistrodlg.ui line 102 #: rc.cpp:389 #, no-c-format msgid "" "You may choose one of the following supported platforms if you are sure " "your platform behaves the same as the chosen one. Please be sure, because your " "current network configuration could be damaged." msgstr "您可以选择以下被支持的平台,如果您确定您的平台和所选择平台表现一致的话。请务必确认这一点,因为您现在的网络配置可能因此被破坏。" #: kadddevicecontainer.cpp:53 msgid "&Advanced Settings" msgstr "高级设置(&A)" #: kadddevicecontainer.cpp:54 kadddevicecontainer.cpp:55 msgid "Toggle between advanced and basic settings" msgstr "切换高级和基此设置" #: kadddevicecontainer.cpp:57 msgid "Apply changes" msgstr "应用更改" #: kadddevicecontainer.cpp:59 msgid "Forget changes" msgstr "放弃更改" #: kadddevicecontainer.cpp:129 kadddnsserverdlg.ui.h:42 #: kaddknownhostdlg.ui.h:25 msgid "The format of the specified IP address is not valid." msgstr "指定 IP 地址的格式无效。" #: kadddevicecontainer.cpp:132 msgid "The format of the specified netmask is not valid." msgstr "指定的网络掩码的格式无效。" #: kadddevicecontainer.cpp:135 msgid "The format of the specified broadcast is not valid." msgstr "指定的广播地址的格式无效。" #: kadddevicecontainer.cpp:138 msgid "The format of the specified Gateway is not valid." msgstr "指定的网关的格式无效。" #: kadddevicecontainer.cpp:174 msgid "Basic Settings" msgstr "基此设置" #: kadddevicecontainer.cpp:179 msgid "Advanced Settings" msgstr "高级设置" #: kprofileslistviewtooltip.h:84 msgid "Network Configuration of this Profile:" msgstr "此配置文件的网络配置:" #: kprofileslistviewtooltip.h:94 #, c-format msgid "

Interface: %1" msgstr "

接口: %1" #: kprofileslistviewtooltip.h:95 #, c-format msgid "
Type: %1" msgstr "
类型: %1" #: kprofileslistviewtooltip.h:101 #, c-format msgid "
Boot Protocol: %1" msgstr "
启动协议: %1" #: kprofileslistviewtooltip.h:104 #, c-format msgid "
IP Address: %1" msgstr "
IP 地址: %1" #: kprofileslistviewtooltip.h:105 #, c-format msgid "
Broadcast Address: %1" msgstr "
广播地址: %1" #: kprofileslistviewtooltip.h:107 #, c-format msgid "
On Boot: %1" msgstr "
启动时: %1" #: kprofileslistviewtooltip.h:111 #, c-format msgid "

Default Gateway: %1" msgstr "

默认网关: %1" #: kprofileslistviewtooltip.h:113 #, c-format msgid "
Domain Name: %1" msgstr "
域名: %1" #: kprofileslistviewtooltip.h:114 #, c-format msgid "
Machine Name: %1" msgstr "
机器名: %1" #: kprofileslistviewtooltip.h:118 #, c-format msgid "
DNS Name Server: %1" msgstr "
DNS 服务器: %1" #: kaddknownhostdlg.ui.h:29 msgid "You must add at least one alias for the specified IP address." msgstr "您必须为指定的 IP 地址至少添加一个别名。" #: kaddknownhostdlg.ui.h:29 msgid "Insufficient Aliases" msgstr "别名不足" #: kaddknownhostdlg.ui.h:63 msgid "Edit Alias" msgstr "编辑别名" #: kaddknownhostdlg.ui.h:64 kaddknownhostdlg.ui.h:92 msgid "Alias:" msgstr "别名:" #: kaddknownhostdlg.ui.h:91 msgid "Add New Alias" msgstr "添加新别名" #: _translatorinfo.cpp:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "Zhang Le" #: _translatorinfo.cpp:3 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "robert@thizgroup.com" #: version.h:5 msgid "" "KNetworkConf - A Trinity Control Center module to configure TCP/IP settings." msgstr "KNetworkConf - 允许您配置 TCP/IP 设置的 TDE 控制中心模块。" #: knetworkconfmodule.cpp:94 msgid "KNetworkConf" msgstr "KNetworkConf" #: knetworkconfmodule.cpp:97 msgid "Lead Developer" msgstr "首席开发者" #: knetworkconfmodule.cpp:99 msgid "Provided the Network backend which KNetworkConf relies on." msgstr "提供了 KNetworkConf 所依赖的网络后端。" #: knetworkconfmodule.cpp:101 msgid "Conectiva Linux Support" msgstr "Conectiva Linux 支持" #: knetworkconfmodule.cpp:103 msgid "Documentation maintainer, and German translator" msgstr "文档维护者和德语翻译" #: knetworkconfmodule.cpp:105 msgid "Various bugfixes and features" msgstr "各种错误修正和特性" #: knetworkconfmodule.cpp:107 msgid "Various bugfixes and Brazilian Portuguese translator" msgstr "各种错误修正和巴西葡萄牙语翻译" #: knetworkconfmodule.cpp:113 msgid "" "%1Network configuration%2This module allows you to configure your TCP/IP " "settings.%3" msgstr "%1网络配置%2此模块允许您配置您的 TCP/IP 设置。%3" #: kadddnsserverdlg.ui.h:54 msgid "You have to type an alias first." msgstr "您必须先输入一个别名。" #: kadddnsserverdlg.ui.h:54 msgid "Invalid Text" msgstr "无效文字" #: knetworkconfigparser.cpp:41 #, fuzzy msgid "" "Could not find the backend script for the network configuration detection. " "Something is wrong with your installation.\n" " Please check that \n" "{TDE_PATH}/%1 \n" "file is present." msgstr "" "无法找到后端脚本此来进行网络配置检测。您的安装可能存在问题。\n" "请检查 \n" "{TDE_PATH}/%1 \n" "文件是否存在。" #: knetworkconfigparser.cpp:42 msgid "Could Not Find Network Configuration Backend Script" msgstr "找不到网络配置后端脚本" #: knetworkconfigparser.cpp:65 knetworkconfigparser.cpp:95 #: knetworkconfigparser.cpp:320 knetworkconfigparser.cpp:1016 msgid "" "Could not execute backend script for the network configuration detection. " "Something is wrong with your installation." msgstr "无法执行后端脚本进行网络配置检测。您的安装可能存在问题。" #: knetworkconfigparser.cpp:66 knetworkconfigparser.cpp:96 #: knetworkconfigparser.cpp:321 knetworkconfigparser.cpp:1017 msgid "Could Not Launch Network Configuration Backend Script" msgstr "无法执行网络配置后端脚本" #: knetworkconfigparser.cpp:113 knetworkconfigparser.cpp:837 msgid "Could not parse the XML output from the network configuration backend." msgstr "无法分析网络配置后端的 XML 输出。" #: knetworkconfigparser.cpp:114 msgid "Error While Listing Network Interfaces" msgstr "列出网络接口时出错" #: knetworkconfigparser.cpp:191 msgid "Could not open file /proc/net/route." msgstr "无法打开文件 /proc/net/route。" #: knetworkconfigparser.cpp:192 msgid "Could Not Open File" msgstr "无法打开文件" #: knetworkconfigparser.cpp:304 msgid "%1Please wait while saving the network settings...%2" msgstr "%1请稍候,正在保存网络设置...%2" #: knetworkconfigparser.cpp:762 msgid "Ethernet Network Device" msgstr "以太网设备" #: knetworkconfigparser.cpp:764 msgid "Wireless Network Device" msgstr "无线网络设备" #: knetworkconfigparser.cpp:838 msgid "Error Loading The Network Configuration" msgstr "装入网络配置时出错" #: knetworkconfigparser.cpp:1030 msgid "" "Could not parse the list of supported platforms from the network configuration " "backend." msgstr "无法分析网络配置后端的支持平台列表。" #: knetworkconfigparser.cpp:1031 msgid "Error Obtaining Supported Platforms List" msgstr "获取支持平台列表时出错"