# translation of tdevelop.po to # Copyright (C) 2002,2003, 2004, 2007 Free Software Foundation, Inc. # # Qi Liang , 2001. # Xiong Jiang , 2002,2003, 2004. # Funda Wang , 2005. # 杜比 , 2007. msgid "" msgstr "" "Project-Id-Version: tdevelop\n" "POT-Creation-Date: 2022-01-26 18:22+0000\n" "PO-Revision-Date: 2007-10-06 21:38+0000\n" "Last-Translator: 杜比 \n" "Language-Team: \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #. Instead of a literal translation, add your name to the end of the list (separated by a comma). msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "Qi Liang, Wang Jian, Lee Song Chen, Xiong Jiang" #. Instead of a literal translation, add your email to the end of the list (separated by a comma). msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "" "cavendish@eyou.com, lark@linux.net.cn, leesongchen@263.net, jxiong@offtopic." "org" #: buildtools/ada/adaproject_part.cpp:56 buildtools/ant/antprojectpart.cpp:55 #: buildtools/autotools/autoprojectpart.cpp:104 #: buildtools/custommakefiles/customprojectpart.cpp:83 #: buildtools/pascal/pascalproject_part.cpp:62 #: buildtools/qmake/trollprojectpart.cpp:103 msgid "&Build Project" msgstr "构建工程(&B)" #: buildtools/ada/adaproject_part.cpp:59 #: buildtools/autotools/autoprojectpart.cpp:216 #: buildtools/custommakefiles/customprojectpart.cpp:140 #: buildtools/pascal/pascalproject_part.cpp:68 #: embedded/visualboyadvance/visualboyadvance_part.cpp:33 #: languages/python/pythonsupportpart.cpp:63 msgid "Execute Program" msgstr "执行程序" #: buildtools/ada/adaproject_part.cpp:341 msgid "" "Could not find ada compiler.\n" "Check if your compiler settings are correct." msgstr "" "无法找到 ada 编译器。\n" "请检查您的编译器设置是否正确。" #: buildtools/ada/adaproject_optionsdlgbase.ui:19 #: buildtools/ada/adaproject_part.cpp:375 #: buildtools/ada/adaproject_part.cpp:406 #, no-c-format msgid "Ada Compiler" msgstr "Ada 编译器" #: buildtools/ada/adaproject_part.cpp:422 #, fuzzy msgid "" "There was an error loading the module %1.\n" "The diagnostics are:\n" "%2" msgstr "" "加载模块 %1 时发生错误。\n" "诊断信息为:\n" "%2" #: buildtools/ant/antprojectpart.cpp:58 #: buildtools/autotools/autoprojectpart.cpp:107 #: buildtools/custommakefiles/customprojectpart.cpp:86 #: buildtools/pascal/pascalproject_part.cpp:65 #: buildtools/qmake/trollprojectpart.cpp:106 #: buildtools/qmake/trollprojectwidget.cpp:124 msgid "Build project" msgstr "构建工程" #: buildtools/ant/antprojectpart.cpp:59 msgid "" "Build project

Executes ant dist command to build the project." msgstr "构建工程

执行 ant dist 命令来构建工程。" #: buildtools/ant/antprojectpart.cpp:61 #: buildtools/custommakefiles/customprojectpart.cpp:147 msgid "Build &Target" msgstr "构建目标(&T)" #: buildtools/ant/antprojectpart.cpp:63 #: buildtools/custommakefiles/customprojectpart.cpp:150 msgid "Build target" msgstr "构建目标" #: buildtools/ant/antprojectpart.cpp:64 msgid "" "Build target

Executes ant target_name command to build the " "specified target." msgstr "构建目标

执行 ant target_name 命令来构建指定的目标。" #: buildtools/ant/antprojectpart.cpp:467 msgid "Ant Options" msgstr "Ant 选项" #: buildtools/ant/antprojectpart.cpp:502 msgid "Classpath" msgstr "Classpath" #: buildtools/ant/antprojectpart.cpp:565 msgid "Remove %1 From Project" msgstr "从工程中删除 %1" #: buildtools/ant/antprojectpart.cpp:567 msgid "Remove from project

Removes current file from the project." msgstr "从工程中删除

从工程中删除当前文件。" #: buildtools/ant/antprojectpart.cpp:571 msgid "Add %1 to Project" msgstr "添加 %1 到工程中" #: buildtools/ant/antprojectpart.cpp:573 msgid "Add to project

Adds current file from the project." msgstr "添加到工程

添加当前文件到工程中。" #: buildtools/autotools/addapplicationdlg.cpp:120 #: buildtools/autotools/addservicedlg.cpp:160 msgid "You have to enter a file name." msgstr "您需要输入一个文件名。" #: buildtools/autotools/addapplicationdlg.cpp:127 msgid "You have to enter the file name of an executable program." msgstr "您需要输入可执行程序的文件名。" #: buildtools/autotools/addapplicationdlg.cpp:134 msgid "You have to enter an application name." msgstr "您需要输入应用程序名。" #: buildtools/autotools/addapplicationdlg.cpp:141 #: buildtools/autotools/addservicedlg.cpp:174 msgid "A file with this name exists already." msgstr "这个名字的文件已经存在。" #: buildtools/autotools/addapplicationdlg.cpp:146 #: buildtools/autotools/addservicedlg.cpp:179 msgid "Could not open file for writing." msgstr "无法打开文件进行写入。" #: buildtools/autotools/addexistingdirectoriesdlg.cpp:60 #, fuzzy msgid "" "Drag one or more directories with an existing Makefile.am from the left view " "and drop it here." msgstr "请从上面拖拉一个或多个已含有 Makefile.am 的目录放到这里!" #: buildtools/autotools/addexistingfilesdlg.cpp:75 #: buildtools/autotools/addfiledlg.cpp:51 #: buildtools/autotools/autodetailsview.cpp:315 #: buildtools/autotools/autodetailsview.cpp:337 #: buildtools/autotools/autodetailsview.cpp:419 #: buildtools/autotools/autodetailsview.cpp:498 #: buildtools/autotools/removefiledlg.cpp:74 #: buildtools/autotools/removetargetdlg.cpp:52 msgid "%1 in %2" msgstr "%2 中的 %1" #: buildtools/autotools/addexistingfilesdlg.cpp:88 #, fuzzy msgid "Drag one or more files from the left view and drop it here." msgstr "请从上面拖放一个或多个文件到这里!" #: buildtools/autotools/addexistingfilesdlg.cpp:203 msgid "" "The following file(s) already exist(s) in the target!\n" "Press Continue to import only the new files.\n" "Press Cancel to abort the complete import." msgstr "" "下列文件已经存在于目标中!\n" "请按继续来只导入新的文件。\n" "请按取消来中止整个导入过程。" #: buildtools/autotools/addexistingfilesdlg.cpp:235 #, c-format msgid "Importing... %p%" msgstr "正在导入…… %p%" #: buildtools/autotools/addexistingfilesdlg.cpp:261 msgid "" "The following file(s) are not in the Subproject directory.\n" "Press Link to add the files by creating symbolic links.\n" "Press Copy to copy the files into the directory." msgstr "" "下列文件不在子工程的目录中。\n" "请按链接来通过创建符号链接来添加文件。\n" "请按拷贝来将文件拷贝到目录中。" #: buildtools/autotools/addexistingfilesdlg.cpp:264 msgid "Link (recommended)" msgstr "链接(推荐)" #: buildtools/autotools/addexistingfilesdlg.cpp:264 msgid "Copy (not recommended)" msgstr "拷贝(不推荐)" #: buildtools/autotools/addfiledlg.cpp:72 #: buildtools/script/scriptnewfiledlg.cpp:80 msgid "Please enter the file name without '/' and so on." msgstr "请不要在文件名里包含“/”这样的字符。" #: buildtools/autotools/addfiledlg.cpp:80 msgid "This file is already in the target." msgstr "这个文件在目标中已经存在。" #: buildtools/autotools/addfiledlg.cpp:91 #: buildtools/autotools/addfiledlg.cpp:103 #, fuzzy msgid "" "A file with this name already exists.

Please use the \"Add " "existing file\" dialog." msgstr "一个同名的文件已经存在!

请使用“添加已有的文件”对话框!" #: buildtools/autotools/addapplicationdlgbase.ui:117 #: buildtools/autotools/addicondlg.cpp:45 #: parts/outputviews/appoutputviewpart.cpp:51 #: parts/valgrind/dialog_widget.ui:24 #, no-c-format msgid "Application" msgstr "应用程序" #: buildtools/autotools/addicondlg.cpp:46 msgid "Action" msgstr "动作" #: buildtools/autotools/addicondlg.cpp:47 msgid "Device" msgstr "设备" #: buildtools/autotools/addicondlg.cpp:48 msgid "File System" msgstr "文件系统" #: buildtools/autotools/addicondlg.cpp:49 msgid "MIME Type" msgstr "MIME 类型" #: buildtools/autotools/addprefixdlg.cpp:27 msgid "Add Prefix" msgstr "添加前缀" #: buildtools/autotools/addapplicationdlgbase.ui:265 #: buildtools/autotools/addicondlgbase.ui:94 #: buildtools/autotools/addprefixdlg.cpp:29 #: buildtools/autotools/addservicedlgbase.ui:175 #: buildtools/lib/widgets/addenvvardlg.cpp:36 #: kdevdesigner/designer/dbconnection.ui:132 languages/ada/addclassdlg.ui:88 #: languages/cpp/cppnewclassdlgbase.ui:181 #: parts/documentation/editbookmarkdlg.ui:32 parts/snippet/snippetdlg.ui:106 #: src/profileengine/editor/addprofilewidget.ui:41 #, no-c-format msgid "&Name:" msgstr "名称(&N):" #: buildtools/autotools/addprefixdlg.cpp:35 msgid "&Path:" msgstr "路径(&P):" #: buildtools/autotools/addservicedlg.cpp:139 #, fuzzy msgid "Enter Value" msgstr "外部的" #: buildtools/autotools/addservicedlg.cpp:139 msgid "Property %1:" msgstr "属性 %1:" #: buildtools/autotools/addservicedlg.cpp:167 msgid "You have to enter a service name." msgstr "您需要输入一个服务名。" #: buildtools/autotools/addsubprojectdlg.cpp:58 msgid "You have to give the subproject a name." msgstr "您需要给子工程指定一个名字。" #: buildtools/autotools/addsubprojectdlg.cpp:65 msgid "A subproject with this name already exists." msgstr "一个同名的子工程已经存在。" #: buildtools/autotools/addsubprojectdlg.cpp:75 msgid "" "There is no config.status in the project root directory. Run 'Configure' " "first" msgstr "工程的根目录中没有config.status 文件,请先运行 configure。" #: buildtools/autotools/addsubprojectdlg.cpp:85 msgid "A file named %1 already exists." msgstr "一个名为 %1 的文件已经存在。" #: buildtools/autotools/addsubprojectdlg.cpp:90 msgid "" "A subdirectory %1 already exists. Do you wish to add it as a subproject?" msgstr "子目录 %1 已经存在。您要把它作为子工程添加吗?" #: buildtools/autotools/addsubprojectdlg.cpp:97 #, c-format msgid "Could not create subdirectory %1." msgstr "无法创建子目录 %1。" #: buildtools/autotools/addsubprojectdlg.cpp:103 #, c-format msgid "Could not access the subdirectory %1." msgstr "无法访问子目录 %1。" #: buildtools/autotools/addsubprojectdlg.cpp:151 #, fuzzy, c-format msgid "Could not create Makefile.am in subdirectory %1." msgstr "无法在子目录 %1 里创建文件 Makefile.am" #: buildtools/autotools/addtargetdlg.cpp:40 #: buildtools/autotools/autoprojectwidget.cpp:61 msgid "Program" msgstr "程序" #: buildtools/autotools/addtargetdlg.cpp:41 #: buildtools/autotools/autoprojectwidget.cpp:63 msgid "Library" msgstr "库" #: buildtools/autotools/addtargetdlg.cpp:42 #: buildtools/autotools/autoprojectwidget.cpp:65 msgid "Libtool Library" msgstr "Libtool 库" #: buildtools/autotools/addtargetdlg.cpp:43 #: buildtools/autotools/autoprojectwidget.cpp:67 msgid "Script" msgstr "脚本" #: buildtools/autotools/addtargetdlg.cpp:44 #: buildtools/autotools/autoprojectwidget.cpp:69 msgid "Header" msgstr "头文件" #: buildtools/autotools/addtargetdlg.cpp:45 msgid "Data File" msgstr "数据文件" #: buildtools/autotools/addtargetdlg.cpp:46 #: buildtools/autotools/autoprojectwidget.cpp:73 msgid "Java" msgstr "Java" #: buildtools/autotools/addtargetdlg.cpp:145 #, fuzzy msgid "You have to give the target a name" msgstr "您需要给目标指定名字!" #: buildtools/autotools/addtargetdlg.cpp:151 #, fuzzy msgid "Libraries must have a lib prefix." msgstr "库必须用 lib 作前缀!" #: buildtools/autotools/addtargetdlg.cpp:156 #, fuzzy msgid "Libtool libraries must have a lib prefix." msgstr "Libtool 库必须用 lib 作前缀!" #: buildtools/autotools/addtargetdlg.cpp:161 #, fuzzy msgid "Libtool libraries must have a .la suffix." msgstr "Libtool 库必须用 .la 作后缀!" #: buildtools/autotools/addtargetdlg.cpp:179 #, fuzzy msgid "A target with this name already exists." msgstr "同名的目标已经存在!" #: buildtools/autotools/addtranslationdlg.cpp:37 msgid "Add Translation" msgstr "添加翻译" #: buildtools/autotools/addtranslationdlg.cpp:42 #: parts/snippet/snippet_widget.cpp:145 parts/snippet/snippet_widget.cpp:256 #: parts/snippet/snippet_widget.cpp:535 msgid "Language:" msgstr "语言:" #: buildtools/autotools/addtranslationdlg.cpp:79 msgid "Your sourcecode is already translated to all supported languages." msgstr "您的源代码已经被翻译为所有支持的语言。" #: buildtools/autotools/addtranslationdlg.cpp:97 msgid "A translation file for the language %1 exists already." msgstr "一个翻译为 %1 语言的文件已经存在。" #: buildtools/autotools/autodetailsview.cpp:179 #: buildtools/autotools/autosubprojectview.cpp:175 msgid "Options..." msgstr "选项..." #: buildtools/autotools/autodetailsview.cpp:182 #, fuzzy msgid "" "Options

Target options dialog that provides settings for linker " "flags and lists of dependencies and external libraries that are used when " "compiling the target." msgstr "" "选项

目标选项对话框可以提供连接器选项、依赖关系和外部库列表等设置。" #: buildtools/autotools/autodetailsview.cpp:189 #: buildtools/autotools/autodetailsview.cpp:190 #: buildtools/qmake/trollprojectwidget.cpp:1563 #: buildtools/qmake/trollprojectwidget.cpp:1578 msgid "Create New File..." msgstr "创建新文件..." #: buildtools/autotools/autodetailsview.cpp:193 msgid "" "Create new file

Creates a new file and adds it to a currently " "selected target." msgstr "创建新文件

创建新文件并把它添加到当前选中的目标中。" #: buildtools/autotools/autodetailsview.cpp:198 #: buildtools/autotools/autodetailsview.cpp:199 #: buildtools/qmake/trollprojectwidget.cpp:1565 #: buildtools/qmake/trollprojectwidget.cpp:1580 msgid "Add Existing Files..." msgstr "添加已有的文件..." #: buildtools/autotools/autodetailsview.cpp:202 msgid "" "Add existing files

Adds existing file to a currently selected " "target. Header files will not be included in SOURCES list of a target. They " "will be added to noinst_HEADERS instead." msgstr "" "添加已有的文件

添加已有的文件到当前选中的目标中。头文件将不被包含在" "目标的 SOURCES 列表中,而是被添加到 noinst_HEADERS。" #: buildtools/autotools/autodetailsview.cpp:210 msgid "Add Icon..." msgstr "添加图标..." #: buildtools/autotools/autodetailsview.cpp:212 #, fuzzy msgid "Add icon

Adds an icon to a KDEICON target." msgstr "添加图标

添加一个图标到 TDEICON 目标。" #: buildtools/autotools/autodetailsview.cpp:214 #, fuzzy msgid "Build Target" msgstr "构建目标(&T)" #: buildtools/autotools/autodetailsview.cpp:215 msgid "Build Target..." msgstr "构建目标..." #: buildtools/autotools/autodetailsview.cpp:218 msgid "" "Build target

Constructs a series of make commands to build the " "selected target. Also builds dependent targets." msgstr "" "构建目标

构造一系列 make 命令构建所选中的目标,并构建依赖目标。" #: buildtools/autotools/autodetailsview.cpp:224 #: buildtools/autotools/autodetailsview.cpp:225 msgid "Execute Target..." msgstr "执行目标..." #: buildtools/autotools/autodetailsview.cpp:228 #, fuzzy msgid "" "Execute target

Executes the target and tries to build in case it is " "not built." msgstr "执行目标

执行应用程序目标。" #: buildtools/autotools/autodetailsview.cpp:233 msgid "Make Target Active" msgstr "激活目标" #: buildtools/autotools/autodetailsview.cpp:236 #, fuzzy msgid "" "Make target active

Marks the currently selected target as 'active'. " "New files and classes by default go to an active target. Using the Build " "Active Target menu command builds it." msgstr "" "激活目标

将当前选中的目标标记为“活动”。新文件和类默认将添加到活动目" "标。编译活动目标菜单命令可以编译它。" #: buildtools/autotools/autodetailsview.cpp:247 msgid "" "Remove

Shows a list of targets dependent on the selected target or " "file and asks for removal. Also asks if the target or file should be removed " "from disk." msgstr "" "删除

显示依赖于当前选中的目标或文件的目标列表,询问是否进行删除,并" "询问是否应该将目标或文件从磁盘上删除。" #: buildtools/autotools/autodetailsview.cpp:285 #: buildtools/autotools/targetoptionsdlg.cpp:40 msgid "Target Options for '%1'" msgstr "“%1”的目标选项" #: buildtools/autotools/autodetailsview.cpp:319 msgid "Add New File to '%1'" msgstr "添加新文件到“%1”" #: buildtools/autotools/autodetailsview.cpp:341 msgid "Add Existing Files to '%1'" msgstr "添加已有的文件到“%1”" #: buildtools/autotools/autodetailsview.cpp:423 msgid "Remove File From '%1'" msgstr "从“%1”中删除文件" #: buildtools/autotools/autodetailsview.cpp:450 msgid "Remove Target From '%1'" msgstr "从“%1”中删除目标" #: buildtools/autotools/autodetailsview.cpp:502 #, c-format msgid "Target: %1" msgstr "目标:%1" #: buildtools/autotools/autodetailsview.cpp:557 #: buildtools/qmake/trollprojectwidget.cpp:1760 #, c-format msgid "File: %1" msgstr "文件:%1" #: buildtools/autotools/autodetailsview.cpp:565 #: buildtools/qmake/trollprojectwidget.cpp:1781 msgid "Subclassing Wizard..." msgstr "子类向导..." #: buildtools/autotools/autodetailsview.cpp:566 #: buildtools/qmake/trollprojectwidget.cpp:1782 msgid "" "Subclass widget

Launches Subclassing wizard. It allows to " "create a subclass from the class defined in .ui file. There is also " "possibility to implement slots and functions defined in the base class." msgstr "" "子类部件

启动子类向导。它允许从 .ui 文件中定义的类创建子类。" "也可以实现基类中定义的信号槽和函数。" #: buildtools/autotools/autodetailsview.cpp:574 #: buildtools/qmake/trollprojectwidget.cpp:1790 msgid "List of Subclasses..." msgstr "子类列表..." #: buildtools/autotools/autodetailsview.cpp:575 #: buildtools/qmake/trollprojectwidget.cpp:1791 msgid "" "List of subclasses

Shows subclasses list editor. There is " "possibility to add or remove subclasses from the list." msgstr "子类列表

显示子类列表编辑器,可以在列表中添加或删除子类。" #: buildtools/autotools/autodetailsview.cpp:580 #: buildtools/qmake/trollprojectwidget.cpp:1775 msgid "Edit ui-Subclass..." msgstr "编辑用户界面子类..." #: buildtools/autotools/autodetailsview.cpp:581 #: buildtools/qmake/trollprojectwidget.cpp:1776 msgid "" "Edit ui-subclass

Launches Subclassing wizard and prompts to " "implement missing in childclass slots and functions." msgstr "" "编辑用户界面子类

启动子类向导,询问尚缺少的子类信号槽和函数实" "现。" #: buildtools/autotools/autodetailsview.cpp:586 #: buildtools/qmake/trollprojectwidget.cpp:1787 msgid "Open ui.h File" msgstr "打开 ui.h 文件" #: buildtools/autotools/autodetailsview.cpp:587 #: buildtools/qmake/trollprojectwidget.cpp:1788 #, fuzzy msgid "" "Open ui.h file

Opens .ui.h file associated with the selected .ui." msgstr "打开 ui.h 文件

打开和所选的 .ui 文件相关联的 ui.h 文件。" #: buildtools/autotools/autolistviewitems.cpp:134 #, fuzzy msgid "Edit Substitution" msgstr "函数" #: buildtools/autotools/autolistviewitems.cpp:134 #, fuzzy msgid "Substitution:" msgstr "描述:" #: buildtools/autotools/autoprojectpart.cpp:83 #: buildtools/autotools/autoprojectpart.cpp:90 #: buildtools/autotools/autosubprojectview.cpp:438 msgid "Automake Manager" msgstr "Automake 管理器" #: buildtools/autotools/autoprojectpart.cpp:84 msgid "" "Automake manager

The project tree consists of two parts. The " "'overview' in the upper half shows the subprojects, each one having a " "Makefile.am. The 'details' view in the lower half shows the targets and " "files for the subproject selected in the overview." msgstr "" "Automake 管理器

工程树包括两部分,上半部分的“概要”显示子工程,每个子" "工程有一个 Makefile.am 文件。下半部分的“细节”视图显示概述列表中选中的子工程的" "目标和文件。" #: buildtools/autotools/autoprojectpart.cpp:90 msgid "Automake manager" msgstr "Automake 管理器" #: buildtools/autotools/autoprojectpart.cpp:93 msgid "Add Translation..." msgstr "添加翻译..." #: buildtools/autotools/autoprojectpart.cpp:96 msgid "Add translation" msgstr "添加翻译" #: buildtools/autotools/autoprojectpart.cpp:97 msgid "Add translation

Creates .po file for the selected language." msgstr "添加翻译

为所选择的语种创建 .po 文件。" #: buildtools/autotools/autoprojectpart.cpp:108 #: buildtools/qmake/trollprojectpart.cpp:107 #: buildtools/qmake/trollprojectwidget.cpp:125 msgid "" "Build project

Runs make from the project directory." "
Environment variables and make arguments can be specified in the project " "settings dialog, Make Options tab." msgstr "" "构建工程

在工程目录中运行 make 命令。
环境变量和编译参数可" "以在工程设置对话框的编译选项页中指定。" #: buildtools/autotools/autoprojectpart.cpp:113 msgid "Build &Active Target" msgstr "构建活动目标(&A)" #: buildtools/autotools/autoprojectpart.cpp:116 msgid "Build active target" msgstr "构建活动目标" #: buildtools/autotools/autoprojectpart.cpp:117 msgid "" "Build active target

Constructs a series of make commands to build " "an active target. Also builds dependent targets.
Environment variables " "and make arguments can be specified in the project settings dialog, Make " "Options tab." msgstr "" "编译活动目标

构造一系列编译命令,编译活动的目标,并编译所依赖的目" "标。
环境变量和编译参数可以在工程设置的编译选项页中指定。" #: buildtools/autotools/autoprojectpart.cpp:123 #: buildtools/custommakefiles/customprojectpart.cpp:99 #: buildtools/qmake/trollprojectpart.cpp:94 msgid "Compile &File" msgstr "编译文件(&F)" #: buildtools/autotools/autoprojectpart.cpp:126 #: buildtools/custommakefiles/customprojectpart.cpp:102 #: buildtools/qmake/trollprojectpart.cpp:97 #: buildtools/qmake/trollprojectwidget.cpp:230 msgid "Compile file" msgstr "编译文件" #: buildtools/autotools/autoprojectpart.cpp:127 #: buildtools/qmake/trollprojectpart.cpp:98 #: buildtools/qmake/trollprojectwidget.cpp:231 msgid "" "Compile file

Runs make filename.o command from the directory " "where 'filename' is the name of currently opened file.
Environment " "variables and make arguments can be specified in the project settings " "dialog, Make Options tab." msgstr "" "编译文件

在当前打开的文件“filename”所在的目录运行 make filename." "o 命令。
环境变量和编译参数可以在工程设置对话框的编译选项页中指" "定。" #: buildtools/autotools/autoprojectpart.cpp:132 msgid "Run Configure" msgstr "运行 Configure" #: buildtools/autotools/autoprojectpart.cpp:135 #: buildtools/autotools/autoprojectpart.cpp:665 msgid "Run configure" msgstr "运行 Configure" #: buildtools/autotools/autoprojectpart.cpp:136 msgid "" "Run configure

Executes configure with flags, arguments and " "environment variables specified in the project settings dialog, Configure " "Options tab." msgstr "" "运行 configure

用工程设置的配置选项页中指定的标志、参数和环境" "变量执行 configure。" #: buildtools/autotools/autoprojectpart.cpp:141 #: buildtools/autotools/autoprojectpart.cpp:144 msgid "Run automake && friends" msgstr "运行 automake 工具集" #: buildtools/autotools/autoprojectpart.cpp:145 msgid "" "Run automake && friends

Executes
make -f Makefile.cvs
./configure
commands from the project directory." msgstr "" "运行 automake 工具集

在工程目录中执行下列命令:
make -f " "Makefile.cvs
./configure" #: buildtools/autotools/autoprojectpart.cpp:148 #: buildtools/autotools/autoprojectpart.cpp:151 #, fuzzy msgid "Update admin module" msgstr "更新索引" #: buildtools/autotools/autoprojectpart.cpp:152 msgid "" "Update admin module

Recreates the project admin directory using the " "version present on the local system." msgstr "" #: buildtools/autotools/autoprojectpart.cpp:155 #: buildtools/autotools/autoprojectpart.cpp:158 #: buildtools/autotools/autosubprojectview.cpp:248 #: buildtools/custommakefiles/customprojectpart.cpp:107 #: buildtools/custommakefiles/customprojectpart.cpp:110 #: buildtools/qmake/trollprojectwidget.cpp:1000 msgid "Install" msgstr "安装" #: buildtools/autotools/autoprojectpart.cpp:159 #: buildtools/custommakefiles/customprojectpart.cpp:111 msgid "" "Install

Runs make install command from the project directory." "
Environment variables and make arguments can be specified in the project " "settings dialog, Make Options tab." msgstr "" "安装

在工程目录中执行 make install 命令。
环境变量和编译参" "数可以在工程设置的编译选项页中指定。" #: buildtools/autotools/autoprojectpart.cpp:164 #: buildtools/autotools/autosubprojectview.cpp:254 #: buildtools/custommakefiles/customprojectpart.cpp:123 msgid "Install (as root user)" msgstr "安装(用 root 身份)" #: buildtools/autotools/autoprojectpart.cpp:167 #: buildtools/custommakefiles/customprojectpart.cpp:126 msgid "Install as root user" msgstr "用 root 身份安装" #: buildtools/autotools/autoprojectpart.cpp:168 #: buildtools/custommakefiles/customprojectpart.cpp:127 msgid "" "Install

Runs make install command from the project directory " "with root privileges.
It is executed via tdesu command.
Environment " "variables and make arguments can be specified in the project settings " "dialog, Make Options tab." msgstr "" "安装

在工程目录中用 root 权限执行 make install 命令。
它是" "通过 tdesu 命令来执行的。
环境变量和编译参数可以在工程设置的编译选项页中指定。" #: buildtools/autotools/autoprojectpart.cpp:174 #: buildtools/custommakefiles/customprojectpart.cpp:132 #: buildtools/qmake/trollprojectpart.cpp:127 msgid "&Clean Project" msgstr "清理工程(&C)" #: buildtools/autotools/autoprojectpart.cpp:177 #: buildtools/custommakefiles/customprojectpart.cpp:135 #: buildtools/qmake/trollprojectpart.cpp:130 msgid "Clean project" msgstr "清理工程" #: buildtools/autotools/autoprojectpart.cpp:178 #: buildtools/qmake/trollprojectpart.cpp:131 msgid "" "Clean project

Runs make clean command from the project " "directory.
Environment variables and make arguments can be specified in " "the project settings dialog, Make Options tab." msgstr "" "清理工程

在工程目录中运行 make clean 命令。
环境变量和编译" "参数可以在工程设置对话框的编译选项页中指定。" #: buildtools/autotools/autoprojectpart.cpp:183 msgid "&Distclean" msgstr "清理为发行版(&D)" #: buildtools/autotools/autoprojectpart.cpp:186 msgid "Distclean" msgstr "清理为发行版" #: buildtools/autotools/autoprojectpart.cpp:187 msgid "" "Distclean

Runs make distclean command from the project " "directory.
Environment variables and make arguments can be specified in " "the project settings dialog, Make Options tab." msgstr "" "清理为发行版

在工程目录中执行 make distclean 命令。
环境变" "量和编译参数可以在工程设置的编译选项页中指定。" #: buildtools/autotools/autoprojectpart.cpp:192 msgid "Make Messages && Merge" msgstr "生成并合并消息" #: buildtools/autotools/autoprojectpart.cpp:195 msgid "Make messages && merge" msgstr "生成并合并消息" #: buildtools/autotools/autoprojectpart.cpp:196 msgid "" "Make messages && merge

Runs make package-messages command " "from the project directory.
Environment variables and make arguments can " "be specified in the project settings dialog, Make Options tab." msgstr "" "生成并合并消息

在工程目录中执行 make package-messages 命令。" "
环境变量和编译参数可以在工程设置的编译选项页中指定。" #: buildtools/autotools/autoprojectpart.cpp:204 msgid "Build Configuration" msgstr "构建配置" #: buildtools/autotools/autoprojectpart.cpp:206 msgid "Build configuration menu" msgstr "构建配置菜单" #: buildtools/autotools/autoprojectpart.cpp:207 msgid "" "Build configuration menu

Allows to switch between project build " "configurations.
Build configuration is a set of build and top source " "directory settings, configure flags and arguments, compiler flags, etc." "
Modify build configurations in project settings dialog, Configure " "Options tab." msgstr "" "编译配置菜单

可以在工程编译配置之间切换。
编译配置是编译和顶层源" "代码目录设置、配置标志和参数、编译选项等的集合。
请在工程设置的配置选项" "页中改变编译配置。" #: buildtools/autotools/autoprojectpart.cpp:219 #: buildtools/custommakefiles/customprojectpart.cpp:143 #: buildtools/pascal/pascalproject_part.cpp:71 #: languages/python/pythonsupportpart.cpp:66 msgid "Execute program" msgstr "执行程序" #: buildtools/autotools/autoprojectpart.cpp:220 #, fuzzy msgid "" "Execute program

Executes the currently active target or the main " "program specified in project settings, Run Options tab." msgstr "执行主程序

执行在工程设置的运行选项页中指定的主程序" #: buildtools/autotools/autoprojectpart.cpp:232 #: buildtools/autotools/configureoptionswidgetbase.ui:16 #, no-c-format msgid "Configure Options" msgstr "配置选项" #: buildtools/autotools/autoprojectpart.cpp:233 #: buildtools/custommakefiles/customprojectpart.cpp:200 #: buildtools/lib/widgets/runoptionswidgetbase.ui:16 #: buildtools/pascal/pascalproject_part.cpp:403 #: buildtools/qmake/trollprojectpart.cpp:273 #: embedded/visualboyadvance/visualboyadvance_part.cpp:71 #, no-c-format msgid "Run Options" msgstr "运行选项" #: buildtools/autotools/autoprojectpart.cpp:234 #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:16 #: buildtools/custommakefiles/customotherconfigwidgetbase.ui:16 #: buildtools/lib/widgets/makeoptionswidgetbase.ui:16 #: buildtools/qmake/trollprojectpart.cpp:276 #, no-c-format msgid "Make Options" msgstr "Make 选项" #: buildtools/autotools/autoprojectpart.cpp:307 msgid "" "No active target specified, running the application will\n" "not work until you make a target active in the Automake Manager\n" "on the right side or use the Main Program options under\n" "Project -> Project Options -> Run Options" msgstr "" #: buildtools/autotools/autoprojectpart.cpp:310 #, fuzzy msgid "No active target specified" msgstr "未发现活动目标" #: buildtools/autotools/autoprojectpart.cpp:415 msgid "" "There is no active target.\n" "Unable to determine the main program." msgstr "" #: buildtools/autotools/autoprojectpart.cpp:416 #: buildtools/autotools/autoprojectpart.cpp:1244 #, fuzzy msgid "No active target found" msgstr "未发现活动目标" #: buildtools/autotools/autoprojectpart.cpp:422 msgid "" "Active target \"%1\" is not binary ( %2 ).\n" "Unable to determine the main program. If you want this\n" "to be the active target, set a main program under\n" "Project -> Project Options -> Run Options" msgstr "" #: buildtools/autotools/autoprojectpart.cpp:425 #: buildtools/autotools/autoprojectpart.cpp:1251 msgid "Active target is not a library" msgstr "" #: buildtools/autotools/autoprojectpart.cpp:553 #, fuzzy msgid "" "The directory you selected is not the active directory.\n" "You should 'activate' the target you're currently working on in Automake " "Manager.\n" "Just right-click a target and choose 'Make Target Active'." msgstr "" "您指定的目录不是活动的目录!\n" "您应该用 Automake 管理器“激活”您当前正在工作的目标。\n" "只需用鼠标右键点击目标,并选择“激活目标”即可。" #: buildtools/autotools/autoprojectpart.cpp:556 msgid "No Active Target Found" msgstr "未发现活动目标" #: buildtools/autotools/autoprojectpart.cpp:652 #, fuzzy msgid "" "%1\n" "There is no Makefile in this directory\n" "and no configure script for this project.\n" "Run automake & friends and configure first?" msgstr "" "这个目录里没有 Makefile,也没有此工程的配置脚本。\n" "要先运行 automake 工具集进行配置吗?" #: buildtools/autotools/autoprojectpart.cpp:654 msgid "Run Them" msgstr "运行" #: buildtools/autotools/autoprojectpart.cpp:654 #: buildtools/autotools/autoprojectpart.cpp:665 #: buildtools/autotools/configureoptionswidget.cpp:239 #: buildtools/qmake/trollprojectwidget.cpp:2186 #, fuzzy msgid "Do Not Run" msgstr "不运行(&N)" #: buildtools/autotools/autoprojectpart.cpp:665 #, fuzzy msgid "" "%1\n" "There is no Makefile in this directory. Run 'configure' first?" msgstr "这个目录里没有 Makefile,要先运行 configure 吗?" #: buildtools/autotools/autoprojectpart.cpp:803 msgid "" "Found a circular dependency in the project, between this target and %1.\n" "Cannot build this project until this is resolved." msgstr "" #: buildtools/autotools/autoprojectpart.cpp:803 msgid "Circular Dependency found" msgstr "" #: buildtools/autotools/autoprojectpart.cpp:903 msgid "Can only compile files in directories which belong to the project." msgstr "只能编译这个目录里属于此工程的文件。" #: buildtools/autotools/autoprojectpart.cpp:1018 msgid "" "There is neither a Makefile.cvs file nor an autogen.sh script in the project " "directory." msgstr "这个工程目录里既没有 Makefile.cvs 或者 autogen.sh 脚本。" #: buildtools/autotools/autoprojectpart.cpp:1198 #: buildtools/qmake/trollprojectwidget.cpp:678 #: buildtools/qmake/trollprojectwidget.cpp:2060 msgid "Your application is currently running. Do you want to restart it?" msgstr "您的应用程序当前正在运行,您要重新开始运行它吗?" #: buildtools/autotools/autoprojectpart.cpp:1198 #: buildtools/qmake/trollprojectwidget.cpp:678 #: buildtools/qmake/trollprojectwidget.cpp:2060 msgid "Application Already Running" msgstr "应用程序已在运行" #: buildtools/autotools/autoprojectpart.cpp:1198 #: buildtools/qmake/trollprojectwidget.cpp:678 #: buildtools/qmake/trollprojectwidget.cpp:2060 msgid "&Restart Application" msgstr "重新启动应用程序(&R)" #: buildtools/autotools/autoprojectpart.cpp:1198 #: buildtools/qmake/trollprojectwidget.cpp:678 #: buildtools/qmake/trollprojectwidget.cpp:2060 msgid "Do &Nothing" msgstr "不运行(&N)" #: buildtools/autotools/autoprojectpart.cpp:1243 msgid "" "There is no active target.\n" "Unable to determine the main program" msgstr "" #: buildtools/autotools/autoprojectpart.cpp:1248 msgid "" "Active target \"%1\" is not binary ( %2 ).\n" "Unable to determine the main program. If you want this\n" "to be the active target, set a main program under\n" "Project -> Project Options -> Run Options" msgstr "" #: buildtools/autotools/autoprojectwidget.cpp:71 msgid "Data" msgstr "数据" #: buildtools/autotools/autoprojectwidget.cpp:633 msgid "Documentation data" msgstr "文档数据" #: buildtools/autotools/autoprojectwidget.cpp:635 msgid "TDE Icon data" msgstr "TDE 图标数据" #: buildtools/autotools/autoprojectwidget.cpp:637 msgid "%1 (%2 in %3)" msgstr "%1 (%3 中的 %2)" #: buildtools/autotools/autosubprojectview.cpp:177 #, fuzzy msgid "" "Options

Shows subproject options dialog that provides settings " "for compiler, include paths, prefixes and build order." msgstr "" "选项

显示子工程选项对话框,它提供编译器设置、头文件路径、前缀和编译" "顺序设置。" #: buildtools/autotools/autosubprojectview.cpp:182 #: buildtools/autotools/autosubprojectview.cpp:183 #, fuzzy msgid "Add new subproject..." msgstr "添加子工程..." #: buildtools/autotools/autosubprojectview.cpp:185 #, fuzzy msgid "" "Add new subproject

Creates a new subproject in currently " "selected subproject." msgstr "添加子工程

在当前选中的子工程中添加新的子工程。" #: buildtools/autotools/autosubprojectview.cpp:189 #: buildtools/qmake/trollprojectwidget.cpp:1031 msgid "Remove Subproject..." msgstr "删除子工程..." #: buildtools/autotools/autosubprojectview.cpp:191 #, fuzzy msgid "" "Remove subproject

Removes the subproject. Asks if the " "subproject should be also removed from disk. Only subprojects which do not " "hold other subprojects can be removed." msgstr "" "删除子工程

删除子工程,并询问是否从磁盘上删除子工程。只有不包含其它" "子工程的子工程才能被删除。" #: buildtools/autotools/autosubprojectview.cpp:194 msgid "Add Existing Subprojects..." msgstr "添加已有的子工程" #: buildtools/autotools/autosubprojectview.cpp:196 #, fuzzy msgid "" "Add existing subprojects

Imports existing subprojects " "containing Makefile.am." msgstr "添加已有的子工程

导入已有的含有 Makefile.am 文件的子工程。" #: buildtools/autotools/autosubprojectview.cpp:199 #: buildtools/autotools/autosubprojectview.cpp:200 msgid "Add Target..." msgstr "添加目标..." #: buildtools/autotools/autosubprojectview.cpp:202 #, fuzzy msgid "" "Add target

Adds a new target to the currently selected " "subproject. Target can be a binary program, library, script, also a " "collection of data or header files." msgstr "" "添加目标

在当前选择的子工程中添加新的目标。目标可以是可执行程序、" "库、脚本,或者一组数据或头文件。" #: buildtools/autotools/autosubprojectview.cpp:208 #: buildtools/autotools/autosubprojectview.cpp:209 msgid "Add Service..." msgstr "添加服务..." #: buildtools/autotools/autosubprojectview.cpp:211 #, fuzzy msgid "" "Add service

Creates a .desktop file describing the service." msgstr "添加服务

创建描述该服务的 .desktop 文件。" #: buildtools/autotools/autosubprojectview.cpp:214 #: buildtools/autotools/autosubprojectview.cpp:215 msgid "Add Application..." msgstr "添加程序..." #: buildtools/autotools/autosubprojectview.cpp:217 #, fuzzy msgid "Add application

Creates an application .desktop file." msgstr "添加应用程序

创建应用程序的 .desktop 文件。" #: buildtools/autotools/autosubprojectview.cpp:220 #: buildtools/autotools/autosubprojectview.cpp:221 #: buildtools/qmake/trollprojectwidget.cpp:996 #: languages/pascal/compiler/dccoptions/optiontabs.cpp:157 #: parts/doxygen/messages.cpp:61 msgid "Build" msgstr "构建" #: buildtools/autotools/autosubprojectview.cpp:223 #, fuzzy msgid "" "Build

Runs make from the directory of the selected " "subproject.
Environment variables and make arguments can be specified in " "the project settings dialog, Make Options tab." msgstr "" "编译

在所选择的子工程目录中运行 make 命令。
环境变量和编译" "参数可以在工程设置对话框的编译选项页中指定。" #: buildtools/autotools/autosubprojectview.cpp:229 msgid "Force Reedit" msgstr "强制重新编辑" #: buildtools/autotools/autosubprojectview.cpp:231 #, fuzzy msgid "" "Force Reedit

Runs make force-reedit from the directory " "of the selected subproject.
This recreates makefile (tip: and solves most " "of .moc related problems)
Environment variables and make arguments can be " "specified in the project settings dialog, Make Options tab." msgstr "" "强制重新编辑

在所选择的子工程目录中运行 make force-reedit 命" "令。
这将重新创建 makefile (提示:并解决一些和 .moc 有关的问题)。
环境" "变量和编译参数可以在工程设置对话框的编译选项页中指定。" #: buildtools/autotools/autosubprojectview.cpp:241 #: buildtools/qmake/trollprojectwidget.cpp:1004 msgid "Clean" msgstr "清理" #: buildtools/autotools/autosubprojectview.cpp:243 #, fuzzy msgid "" "Clean

Runs make clean from the directory of the selected " "subproject.
Environment variables and make arguments can be specified in " "the project settings dialog, Make Options tab." msgstr "" "清理

在所选择的子工程目录中运行 make clean 命令。
环境变量" "和编译参数可以在工程设置对话框的编译选项页中指定。" #: buildtools/autotools/autosubprojectview.cpp:250 #, fuzzy msgid "" "Install

Runs make install from the directory of the " "selected subproject.
Environment variables and make arguments can be " "specified in the project settings dialog, Make Options tab." msgstr "" "安装

在所选择的子工程目录中运行 make install 命令。
环境变" "量和编译参数可以在工程设置对话框的编译选项页中指定。" #: buildtools/autotools/autosubprojectview.cpp:256 #, fuzzy msgid "" "Install as root user

Runs make install command from the " "directory of the selected subproject with root privileges.
It is " "executed via tdesu command.
Environment variables and make arguments can " "be specified in the project settings dialog, Make Options tab." msgstr "" "用 root 身份安装

用 root 身份在所选择的子工程目录中运行 make " "install 命令。
它是通过 tdesu 命令来执行的。
环境变量和编译参数可以" "在工程设置对话框的编译选项页中指定。" #: buildtools/autotools/autosubprojectview.cpp:263 msgid "Expand Subtree" msgstr "展开子树" #: buildtools/autotools/autosubprojectview.cpp:265 msgid "Collapse Subtree" msgstr "折叠子树" #: buildtools/autotools/autosubprojectview.cpp:268 msgid "Manage Custom Commands..." msgstr "管理自定义命令..." #: buildtools/autotools/autosubprojectview.cpp:270 msgid "" "Manage custom commands

Allows to create, edit and delete custom " "build commands which appears in the subproject context menu.
" msgstr "" #: buildtools/autotools/autosubprojectview.cpp:283 #, c-format msgid "Subproject: %1" msgstr "子工程:%1" #: buildtools/autotools/autosubprojectview.cpp:353 msgid "Add New Subproject to '%1'" msgstr "添加新的子工程到“%1”" #: buildtools/autotools/autosubprojectview.cpp:365 msgid "Add Existing Subproject to '%1'" msgstr "添加已有的子工程到“%1”" #: buildtools/autotools/autosubprojectview.cpp:380 msgid "Add New Target to '%1'" msgstr "添加新目标到“%1”" #: buildtools/autotools/autosubprojectview.cpp:395 msgid "Add New Service to '%1'" msgstr "添加新服务到“%1”" #: buildtools/autotools/autosubprojectview.cpp:410 msgid "Add New Application to '%1'" msgstr "添加新应用程序到“%1”" #: buildtools/autotools/autosubprojectview.cpp:438 msgid "This item cannot be removed" msgstr "这个项目无法删除" #: buildtools/autotools/autosubprojectview.cpp:451 msgid "There is no subproject %1 in SUBDIRS" msgstr "在 SUBDIRS 中没有子工程 %1" #: buildtools/autotools/autosubprojectview.cpp:456 #, c-format msgid "Remove Subproject %1" msgstr "删除子工程 %1" #: buildtools/autotools/autosubprojectview.cpp:457 msgid "Do you really want to remove subproject %1 with all targets and files?" msgstr "您真要删除子工程 %1 及所有目标和文件吗?" #: buildtools/autotools/autosubprojectview.cpp:1020 msgid "Manage Custom Commands" msgstr "" #: buildtools/autotools/choosetargetdialog.cpp:62 #: buildtools/autotools/choosetargetdlgbase.ui:22 #, no-c-format msgid "Automake Manager - Choose Target" msgstr "Automake 管理器 - 选择目标" #: buildtools/autotools/choosetargetdialog.cpp:265 #, fuzzy msgid "" "The file %1 already exists in the chosen target.\n" "The file will be created but will not be added to the target.\n" "Rename the file and select 'Add Existing Files' from the Automake Manager." msgstr "" "文件 %1 在所选择的目标中已经存在!\n" "该文件将被创建,但是不添加到目标中。\n" "请重新命名文件,然后从 Automake 管理器中选择“添加已有的文件”。" #: buildtools/autotools/choosetargetdialog.cpp:267 msgid "Error While Adding Files" msgstr "添加文件出错" #: buildtools/autotools/configureoptionswidget.cpp:239 msgid "Re-run configure for %1 now?" msgstr "现在重新运行 %1 的 configure 吗?" #: buildtools/autotools/configureoptionswidget.cpp:239 #, fuzzy msgid "Rerun" msgstr "运行" #: buildtools/autotools/configureoptionswidget.cpp:398 #: buildtools/pascal/pascalproject_part.cpp:450 msgid "" "There was an error loading the module %1.\n" "The diagnostics is:\n" "%2" msgstr "" "加载模块 %1 时发生错误。\n" "诊断信息为:\n" "%2" #: buildtools/autotools/fileselectorwidget.cpp:65 msgid "Short View" msgstr "简短视图" #: buildtools/autotools/fileselectorwidget.cpp:84 msgid "Home directory" msgstr "主目录" #: buildtools/autotools/fileselectorwidget.cpp:87 msgid "Up one level" msgstr "上一级" #: buildtools/autotools/fileselectorwidget.cpp:90 msgid "Previous directory" msgstr "前一个" #: buildtools/autotools/fileselectorwidget.cpp:93 msgid "Next directory" msgstr "下一个目录" #: buildtools/autotools/kimporticonview.cpp:66 msgid "Or just use the buttons." msgstr "" #: buildtools/autotools/managecustomcommand.cpp:46 msgid "" "_: this is a list of items in the combobox\n" "Make target,Make target (as root),Make command,Make command (as root)," "Command,Command (as root)" msgstr "" #: buildtools/autotools/removefiledlg.cpp:65 msgid "" "The file %1 is still used by the following targets:\n" "%2\n" "Remove it from all of them?" msgstr "" "文件 %1 仍在被下列目标使用:\n" "%2\n" "将它从所有目标中去掉吗?" #: buildtools/autotools/removefiledlg.cpp:70 msgid "Do you really want to remove %1?" msgstr "您真的要删除 %1 吗?" #: buildtools/autotools/removetargetdlg.cpp:48 msgid "" "Do you really want to remove %1
with all files that are " "attached to it
and all dependencies?" msgstr "" "您真的要删除 %1 及其
附带的所有文件
所有依赖信息" "吗?" #: buildtools/autotools/removetargetdlg.cpp:111 msgid "" "_: no dependency\n" "" msgstr "<无>" #: buildtools/autotools/removetargetdlg.cpp:117 #, c-format msgid "Removing Target... %p%" msgstr "正在删除目标...%p%" #: buildtools/autotools/subprojectoptionsdlg.cpp:48 msgid "Subproject Options for '%1'" msgstr "“%1”的子工程选项" #: buildtools/autotools/subprojectoptionsdlg.cpp:305 msgid "" "Add Include directory: Choose directory, give -Idirectory or use a variable " "with -I$(FOOBAR)" msgstr "" #: buildtools/autotools/subprojectoptionsdlg.cpp:331 #, fuzzy msgid "Edit Include Directory" msgstr "编辑头文件目录:" #: buildtools/autotools/subprojectoptionsdlg.cpp:331 msgid "Edit include directory:" msgstr "编辑头文件目录:" #: buildtools/autotools/subprojectoptionsdlg.cpp:360 msgid "Edit Prefix" msgstr "编辑前缀" #: buildtools/autotools/targetoptionsdlg.cpp:47 msgid "Link convenience libraries inside project (LDADD)" msgstr "连接工程内的代码库 (LDADD)" #: buildtools/autotools/targetoptionsdlg.cpp:48 msgid "Link libraries outside project (LDADD)" msgstr "连接工程外的代码库 (LDADD)" #: buildtools/autotools/targetoptionsdlg.cpp:295 msgid "" "Add Library: Choose the .a/.so file, give -l or use a variable with " "$(FOOBAR)" msgstr "" #: buildtools/autotools/targetoptionsdlg.cpp:297 #: buildtools/qmake/projectconfigurationdlg.cpp:1465 #, fuzzy msgid "Shared Library (*.so)" msgstr "共享库(&H)" #: buildtools/autotools/targetoptionsdlg.cpp:297 #: buildtools/qmake/projectconfigurationdlg.cpp:1465 #, fuzzy msgid "Static Library (*.a)" msgstr "静态库(&A)" #: buildtools/autotools/targetoptionsdlg.cpp:337 #, fuzzy msgid "Edit External Library" msgstr "编辑外部库:" #: buildtools/autotools/targetoptionsdlg.cpp:337 msgid "Edit external library:" msgstr "编辑外部库:" #: buildtools/custommakefiles/custommanagerwidget.cpp:43 msgid "" "_: blacklisted files and directories are not considered part of the project, " "even if they fit one of the wildcard patterns in the project file list\n" "Blacklisted files/dirs" msgstr "" #: buildtools/custommakefiles/customprojectpart.cpp:79 #: buildtools/custommakefiles/customprojectpart.cpp:80 #, fuzzy msgid "Re-Populate Project" msgstr "重新编译工程(&R)" #: buildtools/custommakefiles/customprojectpart.cpp:81 msgid "" "Re-Populate Project

Re-Populates the project, searching through the " "project directory and adding all files that match one of the wildcards set " "in the custom manager options of the project filelist." msgstr "" #: buildtools/custommakefiles/customprojectpart.cpp:87 msgid "" "Build project

Runs make from the project directory." "
Environment variables and make arguments can be specified in the project " "settings dialog, Build Options tab." msgstr "" "构建工程

在工程目录中运行 make 命令。
环境变量和 make 的参" "数可以在工程设置的构建选项页中指定。" #: buildtools/custommakefiles/customprojectpart.cpp:91 #, fuzzy msgid "&Build Active Directory" msgstr "Make 活动目录" #: buildtools/custommakefiles/customprojectpart.cpp:94 #, fuzzy msgid "Build active directory" msgstr "构建活动目标" #: buildtools/custommakefiles/customprojectpart.cpp:95 #, fuzzy msgid "" "Build active directory

Constructs a series of make commands to " "build the active directory. Environment variables and make arguments can be " "specified in the project settings dialog, Make Options tab." msgstr "" "编译活动目标

构造一系列编译命令,编译活动的目标,并编译所依赖的目" "标。
环境变量和编译参数可以在工程设置的编译选项页中指定。" #: buildtools/custommakefiles/customprojectpart.cpp:103 msgid "" "Compile file

Runs make filename.o command from the directory " "where 'filename' is the name of currently opened file.
Environment " "variables and make arguments can be specified in the project settings " "dialog, Build Options tab." msgstr "" "编译文件

在当前打开的文件“'filename”所在的目录中运行 make " "filename.o 命令。
环境变量和编译参数可以在工程设置的构建选项页" "中指定。" #: buildtools/custommakefiles/customprojectpart.cpp:115 #, fuzzy msgid "Install Active Directory" msgstr "Make 活动目录" #: buildtools/custommakefiles/customprojectpart.cpp:118 #, fuzzy msgid "Install active directory" msgstr "Make 活动目录" #: buildtools/custommakefiles/customprojectpart.cpp:119 #, fuzzy msgid "" "Install active directory

Runs make install command from the " "active directory.
Environment variables and make arguments can be " "specified in the project settings dialog, Make Options tab." msgstr "" "安装

在工程目录中执行 make install 命令。
环境变量和编译参" "数可以在工程设置的编译选项页中指定。" #: buildtools/custommakefiles/customprojectpart.cpp:136 msgid "" "Clean project

Runs make clean command from the project " "directory.
Environment variables and make arguments can be specified in " "the project settings dialog, Build Options tab." msgstr "" "清理工程

在工程目录中运行 make clean 命令。
环境变量和编译" "参数可以在工程设置的构建选项页中指定。" #: buildtools/custommakefiles/customprojectpart.cpp:144 msgid "" "Execute program

Executes the main program specified in project " "settings, Run Options tab. If it is not specified then the active " "target is used to determine the application to run." msgstr "" "执行程序

执行工程设置的运行选项页中指定的主程序。如果未指定," "则使用激活的目标确定要运行的应用程序。" #: buildtools/custommakefiles/customprojectpart.cpp:151 msgid "" "Build target

Runs make targetname from the project directory " "(targetname is the name of the target selected).
Environment variables " "and make arguments can be specified in the project settings dialog, Build " "Options tab." msgstr "" "构建目标

在工程目录中运行 make targetname 命令(targetname 是" "所选择的目标名称)。
环境变量和编译参数可以在工程设置的构建选项页中" "指定。" #: buildtools/custommakefiles/customprojectpart.cpp:158 msgid "Make &Environment" msgstr "Make 环境(&E)" #: buildtools/custommakefiles/customprojectpart.cpp:160 msgid "Make environment" msgstr "Make 环境" #: buildtools/custommakefiles/customprojectpart.cpp:161 msgid "" "Make Environment

Choose the set of environment variables to be " "passed on to make.
Environment variables can be specified in the project " "settings dialog, Build Options tab." msgstr "" "Make 环境

选择传递给 make 的环境变量集合。
环境变量可以在工程设置" "的构建选项页中指定。" #: buildtools/custommakefiles/customprojectpart.cpp:196 #, fuzzy msgid "Custom Manager" msgstr "Automake 管理器" #: buildtools/custommakefiles/customprojectpart.cpp:203 #: buildtools/qmake/projectconfigurationdlgbase.ui:1610 #, no-c-format msgid "Build Options" msgstr "编译选项" #: buildtools/custommakefiles/customprojectpart.cpp:208 msgid "&Build" msgstr "构建(&B)" #: buildtools/custommakefiles/customprojectpart.cpp:212 msgid "&Other" msgstr "其它(&O)" #: buildtools/custommakefiles/customprojectpart.cpp:215 msgid "Ma&ke" msgstr "Make(&K)" #: buildtools/custommakefiles/customprojectpart.cpp:243 msgid "Make Active Directory" msgstr "Make 活动目录" #: buildtools/custommakefiles/customprojectpart.cpp:245 msgid "" "Make active directory

Chooses this directory as the destination for " "new files created using wizards like the New Class wizard." msgstr "" "Make 活动目录

选择此目录作为 新建类 之类的向导创建新文件的目" "录。" #: buildtools/custommakefiles/customprojectpart.cpp:259 #, fuzzy msgid "Remove from blacklist" msgstr "从仓库中删除" #: buildtools/custommakefiles/customprojectpart.cpp:261 msgid "" "Remove from blacklist

Removes the given file or directory from the " "blacklist if it is already in it.
The blacklist contains files and " "directories that should be ignored even if they match a project filetype " "pattern" msgstr "" #: buildtools/custommakefiles/customprojectpart.cpp:269 #, fuzzy msgid "Add to blacklist" msgstr "添加空断点" #: buildtools/custommakefiles/customprojectpart.cpp:271 msgid "" "Add to blacklist

Adds the given file or directory to the blacklist." "
The blacklist contains files and directories that should be ignored even " "if they match a project filetype pattern" msgstr "" #: buildtools/custommakefiles/customprojectpart.cpp:319 #, fuzzy msgid "Add Selected File/Dir(s) to Project" msgstr "将选中文件加入到工程" #: buildtools/custommakefiles/customprojectpart.cpp:321 #, fuzzy msgid "" "Add to project

Adds selected file/dir(s) to the list of files in " "the project. Note that the files should be manually added to the " "corresponding makefile or build.xml." msgstr "" "添加到工程

添加当前文件到工程的文件列表中。注意该文件需要手工添加到" "相应的 makefile 或 build.xml 中。" #: buildtools/custommakefiles/customprojectpart.cpp:325 #, fuzzy msgid "Add Selected Dir(s) to Project (recursive)" msgstr "将选中文件加入到工程" #: buildtools/custommakefiles/customprojectpart.cpp:327 #, fuzzy msgid "" "Add to project

Recursively adds selected dir(s) to the list of " "files in the project. Note that the files should be manually added to the " "corresponding makefile or build.xml." msgstr "" "添加到工程

添加当前文件到工程的文件列表中。注意该文件需要手工添加到" "相应的 makefile 或 build.xml 中。" #: buildtools/custommakefiles/customprojectpart.cpp:334 #, fuzzy msgid "Remove Selected File/Dir(s) From Project" msgstr "从工程中删除选中文件" #: buildtools/custommakefiles/customprojectpart.cpp:336 #, fuzzy msgid "" "Remove from project

Removes selected file/dir(s) from the list of " "files in the project. Note that the files should be manually excluded from " "the corresponding makefile or build.xml." msgstr "" "从工程中删除

从工程的文件列表中删除当前文件。注意该文件需要从相应的 " "makefile 或 build.xml 中手工剔除。" #: buildtools/custommakefiles/customprojectpart.cpp:341 #, fuzzy msgid "Remove Selected Dir(s) From Project (recursive)" msgstr "从工程中删除选中文件" #: buildtools/custommakefiles/customprojectpart.cpp:343 #, fuzzy msgid "" "Remove from project

Recursively removes selected dir(s) from the " "list of files in the project. Note that the files should be manually " "excluded from the corresponding makefile or build.xml." msgstr "" "从工程中删除

从工程的文件列表中删除当前文件。注意该文件需要从相应的 " "makefile 或 build.xml 中手工剔除。" #: buildtools/custommakefiles/customprojectpart.cpp:461 msgid "" "This project does not contain any files yet.\n" "Populate it with all C/C++/Java files below the project directory?" msgstr "" "这个工程还没有任何文件。\n" "要添加工程目录下的所有 C/C++/Java 文件吗?" #: buildtools/custommakefiles/customprojectpart.cpp:463 #, fuzzy msgid "Populate" msgstr "模板" #: buildtools/custommakefiles/customprojectpart.cpp:463 msgid "Do Not Populate" msgstr "" #: buildtools/custommakefiles/customprojectpart.cpp:1161 msgid "Object Files" msgstr "对象文件" #: buildtools/custommakefiles/customprojectpart.cpp:1162 msgid "Other Files" msgstr "其它文件" #: buildtools/custommakefiles/selectnewfilesdialog.cpp:24 #, fuzzy msgid "Add newly created files to project" msgstr "将选中文件加入到工程" #: buildtools/autotools/subprojectoptionsdlgbase.ui:566 #: buildtools/custommakefiles/selectnewfilesdialog.cpp:28 #, no-c-format msgid "Path" msgstr "路径" #: buildtools/lib/widgets/addenvvardlg.cpp:34 msgid "Add Environment Variable" msgstr "添加环境变量" #: buildtools/lib/widgets/addenvvardlg.cpp:42 msgid "&Value:" msgstr "值(&V):" #: buildtools/lib/widgets/addfilesdialog.cpp:35 #: buildtools/lib/widgets/addfilesdialog.cpp:54 msgid "Copy File(s)" msgstr "复制文件" #: buildtools/lib/widgets/addfilesdialog.cpp:36 #: buildtools/lib/widgets/addfilesdialog.cpp:55 msgid "Create Symbolic Link(s)" msgstr "创建符号链接" #: buildtools/lib/widgets/addfilesdialog.cpp:37 #: buildtools/lib/widgets/addfilesdialog.cpp:56 msgid "Add Relative Path(s)" msgstr "添加相对路径" #: buildtools/pascal/pascalproject_part.cpp:66 msgid "" "Build project

Runs the compiler on a main source file of the " "project. The compiler and the main source file can be set in project " "settings, Pascal Compiler tab." msgstr "" "构建工程

对工程的主要源代码文件运行编译器。编译器和主源代码文件可以" "在工程设置的 Pascal 编译器页中指定。" #: buildtools/pascal/pascalproject_part.cpp:72 msgid "" "Execute program

Executes the main program specified in project " "settings, Run options tab. If nothing is set, the binary file with " "the same name as the main source file name is executed." msgstr "" "执行程序

执行工程设置的运行选项页中指定的主程序。如果未指定," "和主源代码文件具有相同名字的执行文件将被执行。" #: buildtools/pascal/pascalproject_part.cpp:341 msgid "" "Could not find pascal compiler.\n" "Check if your compiler settings are correct." msgstr "" "无法找到 Pascal 编译器。\n" "请检查您的编译器设置是否正确。" #: buildtools/pascal/pascalproject_optionsdlgbase.ui:19 #: buildtools/pascal/pascalproject_part.cpp:398 #: buildtools/pascal/pascalproject_part.cpp:434 #, no-c-format msgid "Pascal Compiler" msgstr "Pascal 编译器" #: buildtools/qmake/createscopedlg.cpp:33 msgid "Choose existing .pri file or give a new filename for creation" msgstr "" #: buildtools/qmake/createscopedlg.cpp:91 msgid "" "You did not specify all needed information. The scope will not be created." "
Do you want to abort the scope creation?" msgstr "" #: buildtools/qmake/createscopedlg.cpp:93 #, fuzzy msgid "Missing information" msgstr "定义信息" #: buildtools/qmake/projectconfigurationdlg.cpp:140 #, fuzzy msgid "Save the current subproject's configuration?" msgstr "QMake 子工程设置" #: buildtools/qmake/projectconfigurationdlg.cpp:141 #, fuzzy msgid "Save Configuration?" msgstr "CVS 服务器配置" #: buildtools/qmake/projectconfigurationdlg.cpp:1380 msgid "Add include directory:" msgstr "添加头文件目录:" #: buildtools/qmake/projectconfigurationdlg.cpp:1463 msgid "Add Library: Either choose the .a/.so file or give -l" msgstr "" #: buildtools/qmake/projectconfigurationdlg.cpp:1547 msgid "Add library directory:" msgstr "添加库目录:" #: buildtools/qmake/projectconfigurationdlg.cpp:1575 msgid "Change include directory:" msgstr "改变头文件目录:" #: buildtools/qmake/projectconfigurationdlg.cpp:1604 #, fuzzy msgid "Change Library:" msgstr "选择库" #: buildtools/qmake/projectconfigurationdlg.cpp:1660 msgid "Change library directory:" msgstr "改变库目录:" #: buildtools/qmake/projectconfigurationdlg.cpp:1687 msgid "Add target:" msgstr "添加目标:" #: buildtools/qmake/projectconfigurationdlg.cpp:1708 msgid "Change target:" msgstr "改变目标:" #: buildtools/autotools/subprojectoptionsdlgbase.ui:555 #: buildtools/lib/parsers/autotools/tests/viewerbase.ui:69 #: buildtools/lib/parsers/qmake/tests/viewerbase.ui:146 #: buildtools/lib/widgets/environmentvariableswidgetbase.ui:28 #: buildtools/qmake/projectconfigurationdlg.cpp:1794 #: buildtools/qmake/projectconfigurationdlgbase.ui:1901 #: kdevdesigner/designer/hierarchyview.cpp:190 #: lib/widgets/propeditor/propertyeditor.cpp:172 #: parts/ctags2/ctags2_settingswidgetbase.ui:303 #: parts/fileview/filegroupswidget.cpp:169 #: src/profileengine/editor/profileeditorbase.ui:86 #: src/profileengine/editor/profileeditorbase.ui:436 #: src/profileengine/editor/profileeditorbase.ui:516 #, no-c-format msgid "Name" msgstr "名称" #: buildtools/ant/antoptionswidget.ui:117 #: buildtools/autotools/addservicedlgbase.ui:362 #: buildtools/lib/widgets/environmentdisplaydialogbase.ui:47 #: buildtools/lib/widgets/environmentvariableswidgetbase.ui:39 #: buildtools/qmake/projectconfigurationdlg.cpp:1796 #: buildtools/qmake/projectconfigurationdlgbase.ui:1923 #: kdevdesigner/designer/propertyeditor.cpp:2923 #: languages/cpp/debugger/variablewidget.cpp:223 #: languages/ruby/debugger/variablewidget.cpp:146 #: lib/widgets/propeditor/propertyeditor.cpp:173 #: parts/partexplorer/partexplorerform.cpp:118 #: parts/regexptest/regexptestdlgbase.ui:257 #, no-c-format msgid "Value" msgstr "值" #: buildtools/qmake/qmakescopeitem.cpp:85 #: parts/fileview/filegroupswidget.cpp:42 msgid "Sources" msgstr "源文件" #: buildtools/qmake/qmakescopeitem.cpp:89 msgid "Headers" msgstr "头文件" #: buildtools/qmake/qmakescopeitem.cpp:93 msgid "Forms" msgstr "界面表单" #: buildtools/qmake/qmakescopeitem.cpp:97 msgid "Corba IDLs" msgstr "Corba IDL 文件" #: buildtools/qmake/qmakescopeitem.cpp:101 msgid "Lexsources" msgstr "Lex 源文件" #: buildtools/qmake/qmakescopeitem.cpp:105 msgid "Yaccsources" msgstr "Yacc 源文件" #: buildtools/qmake/qmakescopeitem.cpp:109 msgid "Images" msgstr "图片" #: buildtools/qmake/qmakescopeitem.cpp:113 #, fuzzy msgid "Resources" msgstr "Lex 源文件" #: buildtools/qmake/qmakescopeitem.cpp:117 msgid "Distfiles" msgstr "" #: buildtools/qmake/qmakescopeitem.cpp:121 #: parts/fileview/filegroupswidget.cpp:43 msgid "Translations" msgstr "翻译" #: buildtools/qmake/qmakescopeitem.cpp:125 msgid "Installs" msgstr "安装" #: buildtools/qmake/qmakescopeitem.cpp:129 msgid "Install object" msgstr "安装对象" #: buildtools/qmake/qmakescopeitem.cpp:134 msgid "Source Files" msgstr "源文件" #: buildtools/qmake/scope.cpp:161 #, fuzzy, c-format msgid "Could not parse project file: %1" msgstr "无法读取工程文件:“%1”" #: buildtools/qmake/scope.cpp:162 #, fuzzy msgid "Could not parse project file" msgstr "无法读取工程文件:“%1”" #: buildtools/qmake/scope.cpp:201 #, fuzzy, c-format msgid "Could not write project file: %1" msgstr "无法读取工程文件:“%1”" #: buildtools/qmake/scope.cpp:202 #, fuzzy msgid "Could not write project file" msgstr "无法写入工程文件。" #: buildtools/qmake/trollprojectpart.cpp:82 #: buildtools/qmake/trollprojectpart.cpp:89 #: buildtools/qmake/trollprojectpart.cpp:279 #, fuzzy msgid "TQMake Manager" msgstr "QMake 管理器" #: buildtools/qmake/trollprojectpart.cpp:83 #, fuzzy msgid "" "TQMake manager

The TQMake manager project tree consists of two " "parts. The 'overview' in the upper half shows the subprojects, each one " "having a .pro file. The 'details' view in the lower half shows the list of " "files for the active subproject selected in the overview." msgstr "" "QMake 管理器

QMake 工程树包括两部分,上半部分的“概要”显示子工程,每" "个子工程有一个 Makefile.am 文件。下半部分的“细节”视图显示概述列表中当前选中的" "子工程中的文件列表。" #: buildtools/qmake/trollprojectpart.cpp:89 #, fuzzy msgid "TQMake manager" msgstr "QMake 管理器" #: buildtools/qmake/trollprojectpart.cpp:111 msgid "&Rebuild Project" msgstr "重新编译工程(&R)" #: buildtools/qmake/trollprojectpart.cpp:114 #: buildtools/qmake/trollprojectwidget.cpp:133 msgid "Rebuild project" msgstr "重新编译工程" #: buildtools/qmake/trollprojectpart.cpp:115 #: buildtools/qmake/trollprojectwidget.cpp:134 #: buildtools/qmake/trollprojectwidget.cpp:1014 msgid "" "Rebuild project

Runs make clean and then make from " "the project directory.
Environment variables and make arguments can be " "specified in the project settings dialog, Make Options tab." msgstr "" "重新编译工程

在工程目录中运行 make clean 命令,然后运行 " "make 命令。
环境变量和编译参数可以在工程设置对话框的编译选项" "页中指定。" #: buildtools/qmake/trollprojectpart.cpp:119 #, fuzzy msgid "&Install Project" msgstr "安装对象" #: buildtools/qmake/trollprojectpart.cpp:122 #, fuzzy msgid "Install project" msgstr "安装对象" #: buildtools/qmake/trollprojectpart.cpp:123 #, fuzzy msgid "" "Install project

Runs make install from the project directory." "
Environment variables and make arguments can be specified in the project " "settings dialog, Make Options tab." msgstr "" "安装

在工程目录中执行 make install 命令。
环境变量和编译参" "数可以在工程设置的编译选项页中指定。" #: buildtools/qmake/trollprojectpart.cpp:135 #, fuzzy msgid "&Dist-Clean Project" msgstr "清理工程(&C)" #: buildtools/qmake/trollprojectpart.cpp:138 #, fuzzy msgid "Dist-Clean project" msgstr "清理工程" #: buildtools/qmake/trollprojectpart.cpp:139 #, fuzzy msgid "" "Dist-Clean project

Runs make distclean command from the " "project directory.
Environment variables and make arguments can be " "specified in the project settings dialog, Make Options tab." msgstr "" "清理工程

在工程目录中运行 make clean 命令。
环境变量和编译" "参数可以在工程设置对话框的编译选项页中指定。" #: buildtools/qmake/trollprojectpart.cpp:143 #: languages/csharp/csharpsupportpart.cpp:65 #: languages/perl/perlsupportpart.cpp:65 msgid "Execute Main Program" msgstr "执行主程序" #: buildtools/qmake/trollprojectpart.cpp:146 #: buildtools/qmake/trollprojectwidget.cpp:143 msgid "Execute main program" msgstr "执行主程序" #: buildtools/qmake/trollprojectpart.cpp:147 #, fuzzy msgid "" "Execute program

Executes the currently selected subproject if it is " "an application or the program specified in project settings, Run Options tab." msgstr "执行主程序

执行在工程设置的运行选项页中指定的主程序" #: buildtools/qmake/trollprojectpart.cpp:149 msgid "&Build Subproject" msgstr "构建子工程(&B)" #: buildtools/qmake/trollprojectpart.cpp:152 #: buildtools/qmake/trollprojectwidget.cpp:240 msgid "Build subproject" msgstr "构建子工程" #: buildtools/qmake/trollprojectpart.cpp:153 #: buildtools/qmake/trollprojectwidget.cpp:241 #, fuzzy msgid "" "Build subproject

Runs make from the current subproject " "directory. Current subproject is a subproject selected in TQMake manager 'overview' window.
Environment variables and make arguments can be " "specified in the project settings dialog, Make Options tab." msgstr "" "构建子工程

在当前子工程目录中运行 make 命令。当前子工程是在 " "QMake 管理器的“概要”窗口中选中的子工程。
环境变量和编译参数可以在工" "程设置对话框的编译选项页中指定。" #: buildtools/qmake/trollprojectpart.cpp:158 msgid "&Rebuild Subproject" msgstr "重新构建子工程(&R)" #: buildtools/qmake/trollprojectpart.cpp:161 #: buildtools/qmake/trollprojectwidget.cpp:250 msgid "Rebuild subproject" msgstr "重新构建子工程" #: buildtools/qmake/trollprojectpart.cpp:162 #: buildtools/qmake/trollprojectwidget.cpp:251 #, fuzzy msgid "" "Rebuild subproject

Runs make clean and then make from " "the current subproject directory. Current subproject is a subproject " "selected in TQMake manager 'overview' window.
Environment " "variables and make arguments can be specified in the project settings " "dialog, Make Options tab." msgstr "" "重新构建子工程

在当前子工程目录中运行 make 命令,然后运行 " "make 命令。当前子工程是在 QMake 管理器的“概要”窗口中选中的子工" "程。
环境变量和编译参数可以在工程设置对话框的编译选项页中指定。" #: buildtools/qmake/trollprojectpart.cpp:167 #, fuzzy msgid "&Install Subproject" msgstr "安装对象" #: buildtools/qmake/trollprojectpart.cpp:170 #, fuzzy msgid "Install subproject" msgstr "安装对象" #: buildtools/qmake/trollprojectpart.cpp:171 #, fuzzy msgid "" "Install subproject

Runs make install from the current " "subproject directory. The current subproject is the subproject selected in " "the TQMake manager 'overview' window.
Environment variables and " "make arguments can be specified in the project settings dialog, Make " "Options tab." msgstr "" "构建子工程

在当前子工程目录中运行 make 命令。当前子工程是在 " "QMake 管理器的“概要”窗口中选中的子工程。
环境变量和编译参数可以在工" "程设置对话框的编译选项页中指定。" #: buildtools/qmake/trollprojectpart.cpp:176 msgid "&Clean Subproject" msgstr "清理子工程(&C)" #: buildtools/qmake/trollprojectpart.cpp:179 msgid "Clean subproject" msgstr "清理子工程" #: buildtools/qmake/trollprojectpart.cpp:180 #, fuzzy msgid "" "Clean subproject

Runs make clean from the current subproject " "directory. The current subproject is the subproject selected in the " "TQMake manager 'overview' window.
Environment variables and make " "arguments can be specified in the project settings dialog, Make Options tab." msgstr "" "清理子工程

在当前子工程目录中运行 make clean 命令。当前子工程" "是在 QMake 管理器的“概要”窗口中选中的子工程。
环境变量和编译参数可" "以在工程设置对话框的编译选项页中指定。" #: buildtools/qmake/trollprojectpart.cpp:185 #, fuzzy msgid "&Dist-Clean Subproject" msgstr "清理子工程(&C)" #: buildtools/qmake/trollprojectpart.cpp:188 #, fuzzy msgid "Dist-Clean subproject" msgstr "清理子工程" #: buildtools/qmake/trollprojectpart.cpp:189 #, fuzzy msgid "" "Dist-Clean subproject

Runs make distclean from the current " "subproject directory. The current subproject is the subproject selected in " "the TQMake manager 'overview' window.
Environment variables and " "make arguments can be specified in the project settings dialog, Make " "Options tab." msgstr "" "清理子工程

在当前子工程目录中运行 make clean 命令。当前子工程" "是在 QMake 管理器的“概要”窗口中选中的子工程。
环境变量和编译参数可" "以在工程设置对话框的编译选项页中指定。" #: buildtools/qmake/trollprojectpart.cpp:194 msgid "Execute Subproject" msgstr "执行子工程" #: buildtools/qmake/trollprojectpart.cpp:197 #: buildtools/qmake/trollprojectwidget.cpp:261 msgid "Execute subproject" msgstr "执行子工程" #: buildtools/qmake/trollprojectpart.cpp:198 #: buildtools/qmake/trollprojectwidget.cpp:262 msgid "" "Execute subproject

Executes the target program for the currently " "selected subproject. This action is allowed only if a type of the subproject " "is 'application'. The type of the subproject can be defined in Subproject " "Settings dialog (open it from the subproject context menu)." msgstr "" "执行子工程

运行当前子工程的目标程序。只有当子工程的类型为“应用程" "序”时才允许这个动作。子工程的类型可以在子工程设置对话框中定义,该对话" "框能在子工程环境菜单中打开。" #: buildtools/qmake/trollprojectpart.cpp:291 #, fuzzy msgid "Loading Project..." msgstr "正在工程插件..." #: buildtools/qmake/trollprojectpart.cpp:299 #, fuzzy msgid "Choose TQt3 directory" msgstr "选择工程目录" #: buildtools/qmake/trollprojectpart.cpp:300 msgid "" "Choose the TQt3 directory to use. This directory needs to have an include " "directory containing tqt.h." msgstr "" #: buildtools/qmake/trollprojectpart.cpp:312 msgid "" "The directory you gave is not a proper TQt directory, the project might not " "work properly without one.\n" "Please make sure you give a directory that contains a bin with the qmake " "binary in it and for TQt3 project also contains an include directory with " "tqt.h in it.\n" "Do you want to try setting a TQt directory again?" msgstr "" #: buildtools/qmake/trollprojectpart.cpp:318 #, fuzzy msgid "Wrong TQt directory given" msgstr "去除空目录(&P)" #: buildtools/qmake/trollprojectpart.cpp:333 msgid "" "You did not specify a TQt directory, and the project might not work properly " "without one.\n" "Do you want to try setting a TQt directory again?" msgstr "" #: buildtools/qmake/trollprojectpart.cpp:336 #, fuzzy msgid "No TQt directory given" msgstr "下一个目录" #: buildtools/qmake/trollprojectpart.cpp:351 #, fuzzy msgid "Choose TQMake executable" msgstr "htsearch 可执行文件(&A):" #: buildtools/qmake/trollprojectpart.cpp:352 msgid "" "Choose the TQMake binary to use. TQMake is used to generate Makefiles from " "the project files." msgstr "" #: buildtools/qmake/trollprojectpart.cpp:363 msgid "" "The binary you gave is not executable, the project might not work properly.\n" "Please make sure you give a qmake binary that is executable.\n" "Do you want to try setting the TQMake binary again?" msgstr "" #: buildtools/qmake/trollprojectpart.cpp:367 #, fuzzy msgid "Wrong TQMake binary given" msgstr "去除空目录(&P)" #: buildtools/qmake/trollprojectpart.cpp:382 msgid "" "You did not specify a TQMake binary, and the project might not work properly " "without one.\n" "Do you want to try setting a TQMake binary again?" msgstr "" #: buildtools/qmake/trollprojectpart.cpp:385 #, fuzzy msgid "No TQMake binary given" msgstr "下一个目录" #: buildtools/qmake/trollprojectwidget.cpp:107 msgid "Add subproject" msgstr "添加子工程" #: buildtools/qmake/trollprojectwidget.cpp:108 #: buildtools/qmake/trollprojectwidget.cpp:1026 msgid "" "Add subproject

Creates a new or adds an existing " "subproject to a currently selected subproject. This action is allowed only " "if a type of the subproject is 'subdirectories'. The type of the subproject " "can be defined in Subproject Settings dialog (open it from the " "subproject context menu)." msgstr "" "添加子工程

在当前选择的子工程中创建新的或者添加一个现有的" "子工程。只有当子工程的类型为“子目录”时才允许这个动作。子工程的类型可以在" "子工程设置对话框中定义,该对话框能在子工程环境菜单中打开。" #: buildtools/qmake/trollprojectwidget.cpp:116 msgid "Create scope" msgstr "创建范围" #: buildtools/qmake/trollprojectwidget.cpp:117 #, fuzzy msgid "" "Create scope

Creates TQMake scope in the project file in case the " "subproject is selected or creates nested scope in case the scope is selected." msgstr "" "创建范围

如果选中的是子工程,则在工程文件中创建 QMake 范围,或者如果" "选中的是一个范围,则创建嵌套的范围。" #: buildtools/qmake/trollprojectwidget.cpp:144 msgid "" "Execute main program

Executes the main program specified in project " "settings, Run Options tab." msgstr "执行主程序

执行在工程设置的运行选项页中指定的主程序。" #: buildtools/qmake/trollprojectwidget.cpp:153 msgid "Subproject settings" msgstr "子工程选项" #: buildtools/qmake/trollprojectwidget.cpp:154 #, fuzzy msgid "" "Subproject settings

Opens TQMake Subproject Configuration " "dialog for the currently selected subproject. It provides settings for:" "
subproject type and configuration,
include and library paths," "
lists of dependencies and external libraries,
build order," "
intermediate files locations,
compiler options." msgstr "" "子工程选项

为当前选中的子工程打开 QMake 子工程配置对话框。它" "提供如下设置:
子工程类型和配置;
头文件和库路径;
依赖关系和外部库" "列表;
编译顺序;
中间文件位置;
编译器选项。" #: buildtools/qmake/trollprojectwidget.cpp:204 msgid "Create new file" msgstr "创建新文件" #: buildtools/qmake/trollprojectwidget.cpp:205 #: buildtools/qmake/trollprojectwidget.cpp:1579 msgid "" "Create new file

Creates a new file and adds it to a currently " "selected group." msgstr "创建新文件

创建新文件并将它添加到当前选中的分组中。" #: buildtools/qmake/trollprojectwidget.cpp:212 msgid "Add existing files" msgstr "添加已有的文件" #: buildtools/qmake/trollprojectwidget.cpp:213 #: buildtools/qmake/trollprojectwidget.cpp:1581 msgid "" "Add existing files

Adds existing files to a currently selected " "group. It is possible to copy files to a current subproject directory, " "create symbolic links or add them with the relative path." msgstr "" "添加已有的文件

在当前选中的分组中添加已有的文件。可以复制文件到当前" "子工程目录中、创建符号链接或者通过相对路径添加它们。" #: buildtools/qmake/trollprojectwidget.cpp:222 msgid "Remove file" msgstr "删除文件" #: buildtools/qmake/trollprojectwidget.cpp:223 msgid "" "Remove file

Removes file from a current group. Does not remove file " "from disk." msgstr "删除文件

从当前分组中删除文件。它并不从磁盘上删除它。" #: buildtools/qmake/trollprojectwidget.cpp:276 #, fuzzy msgid "Exclude file" msgstr "排除在此外(&E):" #: buildtools/qmake/trollprojectwidget.cpp:277 msgid "Exclude file

Exclude the selected file from this scope." msgstr "" #: buildtools/qmake/trollprojectwidget.cpp:850 #, fuzzy msgid "Add Subproject" msgstr "添加子工程" #: buildtools/qmake/trollprojectwidget.cpp:850 #, fuzzy msgid "Please enter a name for the subproject: " msgstr "请输入子目录的名称:" #: buildtools/qmake/trollprojectwidget.cpp:877 msgid "" "Failed to create subdirectory. Do you have write permission in the project " "folder?" msgstr "子目录创建失败。您对工程文件夹有写入权限吗?" #: buildtools/qmake/trollprojectwidget.cpp:933 msgid "" "Could not create subproject. This means that either the project you wanted " "to add a subproject to is not parsed correctly, or it is not a subdirs-" "project." msgstr "" #: buildtools/qmake/trollprojectwidget.cpp:935 #, fuzzy msgid "Subproject creation failed" msgstr "子工程信息" #: buildtools/qmake/trollprojectwidget.cpp:952 #, fuzzy msgid "Delete the file/directory of the subproject from disk?" msgstr "选择您的工程所使用的 Qt 版本。" #: buildtools/qmake/trollprojectwidget.cpp:952 #, fuzzy msgid "Delete subdir?" msgstr "删除信号" #: buildtools/qmake/trollprojectwidget.cpp:956 msgid "" "Could not delete subproject.\n" "This is an internal error, please write a bug report to bugs.trinitydesktop." "org and include the output of tdevelop when runfrom a shell." msgstr "" #: buildtools/qmake/trollprojectwidget.cpp:958 #, fuzzy msgid "Subproject Deletion failed" msgstr "子工程选项" #: buildtools/qmake/trollprojectwidget.cpp:977 #, c-format msgid "Subproject %1" msgstr "子工程 %1" #: buildtools/qmake/trollprojectwidget.cpp:997 msgid "" "Build

Runs make from the selected subproject directory." "
Environment variables and make arguments can be specified in the project " "settings dialog, Make Options tab." msgstr "" "构建

在所选中的子工程目录中运行 make 命令。
环境变量和编译" "参数可以在工程设置对话框的编译选项页中指定。" #: buildtools/qmake/trollprojectwidget.cpp:1001 #, fuzzy msgid "" "Install

Runs make install from the selected subproject " "directory.
Environment variables and make arguments can be specified in " "the project settings dialog, Make Options tab." msgstr "" "构建

在所选中的子工程目录中运行 make 命令。
环境变量和编译" "参数可以在工程设置对话框的编译选项页中指定。" #: buildtools/qmake/trollprojectwidget.cpp:1005 #, fuzzy msgid "" "Clean project

Runs make clean command from the project " "directory.
Environment variables and make arguments can be specified in " "the project settings dialog, Make Options tab." msgstr "" "清理工程

在工程目录中运行 make clean 命令。
环境变量和编译" "参数可以在工程设置对话框的编译选项页中指定。" #: buildtools/qmake/trollprojectwidget.cpp:1008 #, fuzzy msgid "Dist-Clean" msgstr "清理为发行版" #: buildtools/qmake/trollprojectwidget.cpp:1009 #, fuzzy msgid "" "Dist-Clean project

Runs make distclean command from the " "project directory.
Environment variables and make arguments can be " "specified in the project settings dialog, Make Options tab." msgstr "" "清理工程

在工程目录中运行 make clean 命令。
环境变量和编译" "参数可以在工程设置对话框的编译选项页中指定。" #: buildtools/qmake/trollprojectwidget.cpp:1013 #, fuzzy msgid "Rebuild" msgstr "构建" #: buildtools/qmake/trollprojectwidget.cpp:1017 #: buildtools/qmake/trollprojectwidget.cpp:2186 msgid "Run qmake" msgstr "运行 qmake" #: buildtools/qmake/trollprojectwidget.cpp:1018 msgid "" "Run qmake

Runs qmake from the selected subproject directory. " "This creates or regenerates Makefile." msgstr "" "运行 qmake

在当前选中的子工程目录中运行 qmake 命令。它将创建" "或者重新创建 Makefile。" #: buildtools/qmake/trollprojectwidget.cpp:1019 #, fuzzy msgid "Run qmake recursively" msgstr "递归(&B)" #: buildtools/qmake/trollprojectwidget.cpp:1020 #, fuzzy msgid "" "Run qmake recursively

Runs qmake from the selected " "subproject directory and recurses into all subproject directories. This " "creates or regenerates Makefile." msgstr "" "运行 qmake

在当前选中的子工程目录中运行 qmake 命令。它将创建" "或者重新创建 Makefile。" #: buildtools/qmake/trollprojectwidget.cpp:1025 #: buildtools/qmake/trollprojectwidget.cpp:1050 msgid "Add Subproject..." msgstr "添加子工程..." #: buildtools/qmake/trollprojectwidget.cpp:1032 msgid "" "Remove subproject

Removes currently selected subproject. Does not " "delete any file from disk. Deleted subproject can be later added by calling " "'Add Subproject' action." msgstr "" "删除子工程

删除当前选中的子工程。它并不删除磁盘上的任何文件。被删除" "的子工程以后还可以用“添加子工程”动作再次添加。" #: buildtools/qmake/trollprojectwidget.cpp:1035 #: buildtools/qmake/trollprojectwidget.cpp:1045 msgid "Create Scope..." msgstr "创建范围..." #: buildtools/qmake/trollprojectwidget.cpp:1036 #, fuzzy msgid "" "Create scope

Creates TQMake scope in the project file of the " "currently selected subproject." msgstr "创建范围

在当前选中的子工程的工程文件中创建 QMake 范围。" #: buildtools/qmake/trollprojectwidget.cpp:1038 msgid "Subproject Settings" msgstr "子工程选项" #: buildtools/qmake/trollprojectwidget.cpp:1039 #, fuzzy msgid "" "Subproject settings

Opens TQMake Subproject Configuration " "dialog. It provides settings for:
subproject type and configuration," "
include and library paths,
lists of dependencies and external " "libraries,
build order,
intermediate files locations,
compiler " "options." msgstr "" "子工程选项

打开 QMake 子工程配置对话框。它提供如下设置:
" "子工程类型和配置;
头文件和库路径;
依赖关系和外部库列表;
编译顺" "序;
中间文件位置;
编译器选项。" #: buildtools/qmake/trollprojectwidget.cpp:1046 #, fuzzy msgid "" "Create Scope

Creates TQMake scope in the currently selected scope." msgstr "创建范围

在当前所选中的范围中创建 QMake 范围。" #: buildtools/qmake/trollprojectwidget.cpp:1047 msgid "Remove Scope" msgstr "删除范围" #: buildtools/qmake/trollprojectwidget.cpp:1048 msgid "Remove Scope

Removes currently selected scope." msgstr "删除范围

删除当前选中的范围。" #: buildtools/qmake/trollprojectwidget.cpp:1051 #, fuzzy msgid "" "Add subproject

Creates a new or adds an existing " "subproject to the currently selected scope. This action is allowed only if " "the type of the subproject is 'subdirectories'. The type of the subproject " "can be defined in the Subproject Settings dialog (open it from the " "subproject context menu)." msgstr "" "添加子工程

在当前选择的子工程中创建新的或者添加一个现有的" "子工程。只有当子工程的类型为“子目录”时才允许这个动作。子工程的类型可以在" "子工程设置对话框中定义,该对话框能在子工程环境菜单中打开。" #: buildtools/qmake/trollprojectwidget.cpp:1056 #, fuzzy msgid "Disable Subproject..." msgstr "添加子工程..." #: buildtools/qmake/trollprojectwidget.cpp:1057 #, fuzzy msgid "" "Disable subproject

Disables the currently selected subproject when " "this scope is active. Does not delete the directory from disk. The deleted " "subproject can be later added by using the 'Add Subproject' action." msgstr "" "删除子工程

删除当前选中的子工程。它并不删除磁盘上的任何文件。被删除" "的子工程以后还可以用“添加子工程”动作再次添加。" #: buildtools/qmake/createscopedlgbase.ui:85 #: buildtools/qmake/trollprojectwidget.cpp:1061 #, fuzzy, no-c-format msgid "Scope Settings" msgstr "片断设置" #: buildtools/qmake/trollprojectwidget.cpp:1062 #, fuzzy msgid "" "Scope settings

Opens TQMake Subproject Configuration dialog. " "It provides settings for:
subproject type and configuration,
include " "and library paths,
lists of dependencies and external libraries,
build " "order,
intermediate files locations,
compiler options." msgstr "" "子工程选项

打开 QMake 子工程配置对话框。它提供如下设置:
" "子工程类型和配置;
头文件和库路径;
依赖关系和外部库列表;
编译顺" "序;
中间文件位置;
编译器选项。" #: buildtools/qmake/trollprojectwidget.cpp:1191 msgid "" "You did not select a subproject to add the file to, or select a subproject " "that has subdirs." msgstr "" #: buildtools/qmake/trollprojectwidget.cpp:1191 #, fuzzy msgid "File adding aborted" msgstr "文件已更改" #: buildtools/qmake/trollprojectwidget.cpp:1262 msgid "All Files" msgstr "所有文件" #: buildtools/qmake/trollprojectwidget.cpp:1376 msgid "Insert New Filepattern" msgstr "插入新文件模板" #: buildtools/qmake/trollprojectwidget.cpp:1377 msgid "" "Please enter a filepattern relative the current subproject (example docs/*." "html):" msgstr "请输入相对于当前子工程的文件模板(例如 docs/*.html):" #: buildtools/qmake/trollprojectwidget.cpp:1392 msgid "Insert New Install Object" msgstr "插入新安装对象" #: buildtools/qmake/trollprojectwidget.cpp:1393 msgid "Please enter a name for the new object:" msgstr "请输入新对象的名称:" #: buildtools/qmake/trollprojectwidget.cpp:1546 msgid "Add Install Object..." msgstr "添加安装对象..." #: buildtools/qmake/trollprojectwidget.cpp:1547 #, fuzzy msgid "" "Add install object

Creates TQMake install object. It is possible to " "define a list of files to install and installation locations for each " "object. Warning! Install objects without path specified will not be saved to " "a project file." msgstr "" "添加安装对象

创建 QMake 安装对象。它可以定义每个安装对象要安装的文件" "列表和安装位置。警告!未指定路径的安装对象将不会被保存在工程文件中。" #: buildtools/qmake/trollprojectwidget.cpp:1553 msgid "Install Path..." msgstr "安装路径..." #: buildtools/qmake/trollprojectwidget.cpp:1554 msgid "" "Install path

Allows to choose the installation path for the current " "install object." msgstr "安装路径

允许选择当前安装对象的安装路径。" #: buildtools/qmake/trollprojectwidget.cpp:1555 msgid "Add Pattern of Files to Install..." msgstr "添加要安装的文件模板..." #: buildtools/qmake/trollprojectwidget.cpp:1556 msgid "" "Add pattern of files to install

Defines the pattern to match files " "which will be installed. It is possible to use wildcards and relative paths " "like docs/*." msgstr "" "添加要安装的文件模板

定义和要安装的文件相匹配的文件模板,可以使用通" "配符和相对路径,比如 docs/*。" #: buildtools/qmake/trollprojectwidget.cpp:1558 #, fuzzy msgid "Remove Install Object" msgstr "添加安装对象" #: buildtools/qmake/trollprojectwidget.cpp:1559 #, fuzzy msgid "" "Remove install object

Removes the install object the current group." msgstr "删除所有断点

删除工程中的所有断点。" #: buildtools/qmake/trollprojectwidget.cpp:1564 msgid "" "Create new file

Creates a new translation file and adds it to a " "currently selected TRANSLATIONS group." msgstr "" "创建新文件

创建新的翻译文件并把它添加到当前选中的 TRANSLATIONS 分组" "中。" #: buildtools/qmake/trollprojectwidget.cpp:1566 msgid "" "Add existing files

Adds existing translation (*.ts) files to a " "currently selected TRANSLATIONS group. It is possible to copy files to a " "current subproject directory, create symbolic links or add them with the " "relative path." msgstr "" "添加已有的文件

添加已有的翻译文件 (*.ts) 到当前选中的 TRANSLATIONS " "分组中。可以复制文件到当前子工程目录中、创建符号链接或者通过相对路径添加它" "们。" #: buildtools/qmake/trollprojectwidget.cpp:1569 msgid "Update Translation Files" msgstr "更新翻译文件" #: buildtools/qmake/trollprojectwidget.cpp:1570 msgid "" "Update Translation Files

Runs lupdate command from the " "current subproject directory. It collects translatable messages and saves " "them into translation files." msgstr "" "更新翻译文件

在当前子工程目录中运行 lupdate 命令。它收集可翻" "译的消息并保存到翻译文件中。" #: buildtools/qmake/trollprojectwidget.cpp:1572 msgid "Release Binary Translations" msgstr "发布翻译结果" #: buildtools/qmake/trollprojectwidget.cpp:1573 msgid "" "Release Binary Translations

Runs lrelease command from the " "current subproject directory. It creates binary translation files that are " "ready to be loaded at program execution." msgstr "" "发布翻译结果

在当前子工程目录中运行 lrelease 命令。它创建二进" "制的翻译文件,可在程序运行时直接加载。" #: buildtools/qmake/trollprojectwidget.cpp:1590 msgid "Choose Install Path" msgstr "选择安装路径" #: buildtools/qmake/trollprojectwidget.cpp:1590 msgid "Enter a path (example /usr/local/share/... ):" msgstr "输入一个路径(例如 /usr/local/share/... ):" #: buildtools/qmake/trollprojectwidget.cpp:1604 msgid "Add Pattern of Files to Install" msgstr "添加要安装的文件模板" #: buildtools/qmake/trollprojectwidget.cpp:1605 #: buildtools/qmake/trollprojectwidget.cpp:1906 msgid "" "Enter a pattern relative to the current subproject (example docs/*.html):" msgstr "输入相对于当前子工程的模板(例如 docs/*.html):" #: buildtools/qmake/trollprojectwidget.cpp:1725 msgid "Add Install Object" msgstr "添加安装对象" #: buildtools/qmake/trollprojectwidget.cpp:1726 msgid "Enter a name for the new object:" msgstr "输入新对象的名称:" #: buildtools/qmake/trollprojectwidget.cpp:1762 #, c-format msgid "Pattern: %1" msgstr "模板:%1" #: buildtools/qmake/trollprojectwidget.cpp:1796 #: buildtools/qmake/trollprojectwidget.cpp:1937 #: parts/distpart/distpart_widget.cpp:595 msgid "Remove File" msgstr "删除文件" #: buildtools/qmake/trollprojectwidget.cpp:1797 #, fuzzy msgid "" "Remove file

Removes file from a current group. For sources, this " "also removes the subclassing information." msgstr "删除文件

从当前分组中删除文件。它并不从磁盘上删除它。" #: buildtools/qmake/trollprojectwidget.cpp:1798 #, fuzzy msgid "Exclude File" msgstr "排除在此外(&E):" #: buildtools/qmake/trollprojectwidget.cpp:1799 msgid "" "Exclude File

Excludes the file from this Scope. Does not touch " "subclassing information" msgstr "" #: buildtools/qmake/trollprojectwidget.cpp:1803 #: buildtools/qmake/trollprojectwidget.cpp:1905 msgid "Edit Pattern" msgstr "编辑模板" #: buildtools/qmake/trollprojectwidget.cpp:1804 msgid "Edit pattern

Allows to edit install files pattern." msgstr "编辑模板

可以编辑安装文件模板。" #: buildtools/qmake/trollprojectwidget.cpp:1805 msgid "Remove Pattern" msgstr "删除模板" #: buildtools/qmake/trollprojectwidget.cpp:1806 msgid "" "Remove pattern

Removes install files pattern from the current " "install object." msgstr "删除模板

从当前安装对象中删除安装文件模板。" #: buildtools/qmake/trollprojectwidget.cpp:1817 #, fuzzy msgid "Build File" msgstr "构建文件(&B):" #: buildtools/qmake/trollprojectwidget.cpp:1818 #, fuzzy msgid "Build File

Builds the object file for this source file." msgstr "重建文件树

重新建立工程文件树。" #: buildtools/qmake/trollprojectwidget.cpp:1934 #, fuzzy msgid "" "Do you want to delete the file %1 from the project and your " "disk?" msgstr "打开一个最近的工程" #: buildtools/qmake/trollprojectwidget.cpp:2052 #, fuzzy msgid "" "Please specify the executable name in the project options dialog or select " "an application subproject in the TQMake Manager." msgstr "请先在工程对话框中指定可执行文件的名称。" #: buildtools/qmake/trollprojectwidget.cpp:2053 #, fuzzy msgid "No Executable Found" msgstr "未指定可执行文件" #: buildtools/qmake/trollprojectwidget.cpp:2186 msgid "There is no Makefile in this directory. Run qmake first?" msgstr "这个目录里没有 Makefile,要先运行 qmake 吗?" #: buildtools/qmake/trollprojectwidget.cpp:2276 msgid "" "Could not delete Function Scope.\n" "This is an internal error, please write a bug report to bugs.trinitydesktop." "org and include the output of tdevelop when run from a shell." msgstr "" #: buildtools/qmake/trollprojectwidget.cpp:2276 #, fuzzy msgid "Function Scope Deletion failed" msgstr "函数" #: buildtools/qmake/trollprojectwidget.cpp:2284 msgid "" "Could not delete Include Scope.\n" "This is an internal error, please write a bug report to bugs.trinitydesktop." "org and include the output of tdevelop when run from a shell." msgstr "" #: buildtools/qmake/trollprojectwidget.cpp:2284 #, fuzzy msgid "Include Scope Deletion failed" msgstr "包含应用程序图标" #: buildtools/qmake/trollprojectwidget.cpp:2296 msgid "" "Could not delete Scope.\n" "This is an internal error, please write a bug report to bugs.trinitydesktop." "org and include the output of tdevelop when run from a shell." msgstr "" #: buildtools/qmake/trollprojectwidget.cpp:2296 msgid "Scope Deletion failed" msgstr "" #: buildtools/qmake/trollprojectwidget.cpp:2462 msgid "" "The project file \"%1\" has changed on disk\n" "(Or you have \"%2\" opened in the editor, which also triggers a reload when " "you change something in the TQMake Manager).\n" "\n" "Do you want to reload it?" msgstr "" #: buildtools/qmake/trollprojectwidget.cpp:2462 #, fuzzy msgid "Project File Changed" msgstr "文件已更改" #: buildtools/qmake/trollprojectwidget.cpp:2462 src/partcontroller.cpp:1009 #: src/partcontroller.cpp:1502 msgid "Do Not Reload" msgstr "不重新装入" #: buildtools/script/scriptnewfiledlg.cpp:36 #: kdevdesigner/designer/mainwindowactions.cpp:659 #: kdevdesigner/designer/newform.ui:41 #, no-c-format msgid "New File" msgstr "新建文件" #: buildtools/autotools/addapplicationdlgbase.ui:247 #: buildtools/autotools/addservicedlgbase.ui:157 #: buildtools/script/scriptnewfiledlg.cpp:38 #: languages/lib/designer_integration/implementationwidgetbase.ui:183 #: languages/php/phpnewclassdlgbase.ui:117 #: parts/filecreate/filecreate_newfile.cpp:46 #, no-c-format msgid "&File name:" msgstr "文件名(&F):" #: buildtools/autotools/addfiledlgbase.ui:173 #: buildtools/script/scriptnewfiledlg.cpp:46 #, no-c-format msgid "&Use file template" msgstr "使用文件模板(&U)" #: buildtools/script/scriptnewfiledlg.cpp:90 msgid "A file with this name already exists." msgstr "这个名字的文件已经存在。" #: buildtools/script/scriptnewfiledlg.cpp:99 msgid "A file template for this extension does not exist." msgstr "这个扩展名的文件模板不存在。" #: buildtools/script/scriptnewfiledlg.cpp:111 msgid "Could not create the new file." msgstr "无法创建新文件。" #: buildtools/script/scriptprojectpart.cpp:53 #: parts/fileselector/fileselector_part.cpp:57 msgid "New File..." msgstr "新建文件..." #: buildtools/script/scriptprojectpart.cpp:56 msgid "New file

Creates a new file." msgstr "新建文件

创建新文件。" #: buildtools/script/scriptprojectpart.cpp:57 #: parts/filecreate/filecreate_part.cpp:83 msgid "Create a new file" msgstr "创建新文件" #: buildtools/script/scriptprojectpart.cpp:59 #, fuzzy msgid "Rescan Project" msgstr "清理工程(&C)" #: buildtools/script/scriptoptionswidgetbase.ui:16 #: buildtools/script/scriptprojectpart.cpp:75 #, no-c-format msgid "Script Project Options" msgstr "脚本工程选项" #: editors/editor-chooser/editorchooser_part.cpp:35 msgid "Editor" msgstr "编辑器" #: kdevdesigner/designer/actiondnd.cpp:349 #: kdevdesigner/designer/actiondnd.cpp:402 msgid "Delete Toolbar" msgstr "删除工具栏" #: kdevdesigner/designer/actiondnd.cpp:352 #: kdevdesigner/designer/actiondnd.cpp:432 msgid "Delete Toolbar '%1'" msgstr "删除工具栏“%1”" #: kdevdesigner/designer/actiondnd.cpp:397 msgid "Delete Separator" msgstr "删除分隔符" #: kdevdesigner/designer/actiondnd.cpp:399 #: kdevdesigner/designer/listboxeditor.ui:153 #: kdevdesigner/designer/listboxeditor.ui:290 #, no-c-format msgid "Delete Item" msgstr "删除项目" #: kdevdesigner/designer/actiondnd.cpp:400 msgid "Insert Separator" msgstr "插入分隔符" #: kdevdesigner/designer/actiondnd.cpp:411 #: kdevdesigner/designer/actiondnd.cpp:466 #: kdevdesigner/designer/actiondnd.cpp:489 msgid "Delete Action '%1' From Toolbar '%2'" msgstr "将动作“%1”从工具栏“%2”删除" #: kdevdesigner/designer/actiondnd.cpp:426 msgid "Add Separator to Toolbar '%1'" msgstr "向工具栏“%1”添加分隔符" #: kdevdesigner/designer/actiondnd.cpp:506 #: kdevdesigner/designer/actiondnd.cpp:573 msgid "Add Action '%1' to Toolbar '%2'" msgstr "将动作“%1”添加到工具栏“%2”" #: kdevdesigner/designer/actiondnd.cpp:566 msgid "Insert/Move Action" msgstr "插入/移动动作" #: kdevdesigner/designer/actiondnd.cpp:567 msgid "" "Action '%1' has already been added to this toolbar.\n" "An Action may only occur once in a given toolbar." msgstr "" #: kdevdesigner/designer/actiondnd.cpp:701 msgid "Add Widget '%1' to Toolbar '%2'" msgstr "将部件“%1”添加到工具栏“%2”" #: kdevdesigner/designer/actioneditorimpl.cpp:52 msgid "Actions" msgstr "动作" #: kdevdesigner/designer/actioneditorimpl.cpp:57 #: kdevdesigner/designer/actionlistview.cpp:90 msgid "New &Action" msgstr "新建动作(&A)" #: kdevdesigner/designer/actioneditorimpl.cpp:58 #: kdevdesigner/designer/actionlistview.cpp:91 msgid "New Action &Group" msgstr "新建动作组(&G)" #: kdevdesigner/designer/actioneditorimpl.cpp:59 #: kdevdesigner/designer/actionlistview.cpp:92 msgid "New &Dropdown Action Group" msgstr "" #: kdevdesigner/designer/actionlistview.cpp:95 msgid "&Connect Action..." msgstr "连接动作(&C)..." #: kdevdesigner/designer/actionlistview.cpp:97 msgid "Delete Action" msgstr "删除动作" #: kdevdesigner/designer/command.cpp:528 kdevdesigner/designer/command.cpp:540 msgid "Set 'name' Property" msgstr "设定“name”属性" #: kdevdesigner/designer/command.cpp:529 msgid "" "The name of a widget must be unique.\n" "'%1' is already used in form '%2',\n" "so the name has been reverted to '%3'." msgstr "" #: kdevdesigner/designer/command.cpp:541 msgid "" "The name of a widget must not be null.\n" "The name has been reverted to '%1'." msgstr "" #: kdevdesigner/designer/connectiondialog.ui.h:209 #, fuzzy msgid "Add Signal/Slot Connection" msgstr "添加连接" #: kdevdesigner/designer/connectiondialog.ui.h:221 #, fuzzy msgid "Remove Signal/Slot Connection" msgstr "删除连接" #: kdevdesigner/designer/connectiondialog.ui.h:228 #, fuzzy msgid "Add Signal/Slot Connections" msgstr "添加连接" #: kdevdesigner/designer/connectiondialog.ui.h:231 #, fuzzy msgid "Remove Signal/Slot Connections" msgstr "删除连接" #: kdevdesigner/designer/connectiondialog.ui.h:237 #, fuzzy msgid "Edit Signal/Slot Connections" msgstr "编辑数据库连接" #: kdevdesigner/designer/connectiontable.cpp:38 msgid "Sender" msgstr "发送器" #: kdevdesigner/designer/connectiontable.cpp:39 #: parts/classview/classtreebase.cpp:77 msgid "Signal" msgstr "信号" #: kdevdesigner/designer/connectiontable.cpp:40 msgid "Receiver" msgstr "接收器" #: kdevdesigner/designer/connectiontable.cpp:41 #: kdevdesigner/designer/customwidgeteditor.ui:706 #: parts/classview/classtreebase.cpp:75 #, no-c-format msgid "Slot" msgstr "槽" #: kdevdesigner/designer/customwidgeteditorimpl.cpp:222 msgid "Adding Custom Widget" msgstr "添加自定义部件" #: kdevdesigner/designer/customwidgeteditorimpl.cpp:223 msgid "" "Custom widget names must be unique.\n" "A custom widget called '%1' already exists, so it is not possible to add " "another widget with this name." msgstr "" #: kdevdesigner/designer/customwidgeteditorimpl.cpp:272 msgid "Removing Custom Widget" msgstr "删除自定义部件" #: kdevdesigner/designer/customwidgeteditorimpl.cpp:273 msgid "The custom widget '%1' is in use, so it cannot be removed." msgstr "自定义部件“%1”正在使用中,所以无法删除。" #: kdevdesigner/designer/customwidgeteditorimpl.cpp:379 msgid "*.h *.h++ *.hxx *.hh|Header Files" msgstr "*.h *.h++ *.hxx *.hh|头文件" #: kdevdesigner/designer/customwidgeteditorimpl.cpp:397 msgid "Renaming Custom Widget" msgstr "重命名自定义部件" #: kdevdesigner/designer/customwidgeteditorimpl.cpp:398 msgid "" "Custom widget names must be unique.\n" "A custom widget called '%1' already exists, so it is not possible to rename " "this widget with this name." msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:780 #: kdevdesigner/designer/customwidgeteditorimpl.cpp:560 #: kdevdesigner/designer/editfunctions.ui:450 #: kdevdesigner/designer/hierarchyview.cpp:760 #: kdevdesigner/designer/hierarchyview.cpp:841 #: kdevdesigner/designer/hierarchyview.cpp:850 #: kdevdesigner/designer/variabledialog.ui:152 #, no-c-format msgid "protected" msgstr "protected" #: kdevdesigner/designer/customwidgeteditorimpl.cpp:684 #: kdevdesigner/designer/customwidgeteditorimpl.cpp:752 msgid "" "*.cw|Custom-Widget Description\n" "*|All Files" msgstr "" "*.cw|自定义部件描述\n" "*|全部文件" #: kdevdesigner/designer/dbconnections.ui:157 #: kdevdesigner/designer/dbconnectionsimpl.cpp:128 #: kdevdesigner/designer/project.cpp:148 #: kdevdesigner/designer/propertyeditor.cpp:2004 #: kdevdesigner/designer/propertyeditor.cpp:2022 #, no-c-format msgid "Connection" msgstr "连接" #: kdevdesigner/designer/editfunctionsimpl.cpp:135 msgid "Add/Remove functions of '%1'" msgstr "添加/删除“%1”的函数" #: kdevdesigner/designer/editfunctionsimpl.cpp:150 #: kdevdesigner/designer/hierarchyview.cpp:1144 msgid "Remove Function" msgstr "删除函数" #: kdevdesigner/designer/editfunctionsimpl.cpp:195 #: kdevdesigner/designer/propertyeditor.cpp:4104 msgid "Add Function" msgstr "添加函数" #: kdevdesigner/designer/editfunctionsimpl.cpp:206 msgid "Change Function Attributes" msgstr "更改函数属性" #: kdevdesigner/designer/editfunctions.ui:41 #: kdevdesigner/designer/editfunctionsimpl.cpp:216 #, no-c-format msgid "Edit Functions" msgstr "编辑函数" #: kdevdesigner/designer/editfunctionsimpl.cpp:217 msgid "" "Some syntactically incorrect functions have been defined.\n" "Remove these functions?" msgstr "" #: kdevdesigner/designer/editfunctionsimpl.cpp:218 #: kdevdesigner/designer/formfile.cpp:330 #: kdevdesigner/designer/formfile.cpp:657 #: kdevdesigner/designer/mainwindow.cpp:2517 #: kdevdesigner/designer/mainwindow.cpp:2847 #: kdevdesigner/designer/mainwindowactions.cpp:1129 #: kdevdesigner/designer/sourcefile.cpp:224 #: kdevdesigner/designer/sourcefile.cpp:269 #: kdevdesigner/designer/variabledialogimpl.cpp:105 #: parts/uimode/uichooser.ui:101 #, no-c-format msgid "&Yes" msgstr "是(&Y)" #: kdevdesigner/designer/editfunctionsimpl.cpp:218 #: kdevdesigner/designer/formfile.cpp:330 #: kdevdesigner/designer/formfile.cpp:657 #: kdevdesigner/designer/mainwindow.cpp:2517 #: kdevdesigner/designer/mainwindow.cpp:2847 #: kdevdesigner/designer/mainwindowactions.cpp:1129 #: kdevdesigner/designer/sourcefile.cpp:224 #: kdevdesigner/designer/sourcefile.cpp:269 #: kdevdesigner/designer/variabledialogimpl.cpp:105 msgid "&No" msgstr "否(&N)" #: kdevdesigner/designer/formfile.cpp:195 #: kdevdesigner/designer/formfile.cpp:218 msgid "The file %1 could not be saved" msgstr "无法保存文件 %1" #: kdevdesigner/designer/formfile.cpp:230 msgid "Failed to save file '%1'." msgstr "保存文件“%1”失败。" #: kdevdesigner/designer/formfile.cpp:236 msgid "'%1' saved." msgstr "“%1”已保存。" #: kdevdesigner/designer/formfile.cpp:264 #: kdevdesigner/designer/formfile.cpp:862 #: kdevdesigner/designer/mainwindowactions.cpp:1212 #, fuzzy msgid "*.ui|TQt User-Interface Files" msgstr "*.ui|Qt 用户界面文件" #: kdevdesigner/designer/formfile.cpp:265 #: kdevdesigner/designer/formfile.cpp:863 #: kdevdesigner/designer/mainwindowactions.cpp:1223 msgid "*|All Files" msgstr "*|所有文件" #: kdevdesigner/designer/formfile.cpp:266 #: kdevdesigner/designer/formfile.cpp:864 msgid "Save Form '%1' As" msgstr "表单“%1”另存为" #: kdevdesigner/designer/formfile.cpp:277 msgid "File Already Exists" msgstr "文件已经存在" #: kdevdesigner/designer/formfile.cpp:278 msgid "The file already exists. Do you wish to overwrite it?" msgstr "文件已经存在。您想要覆盖吗?" #: kdevdesigner/designer/formfile.cpp:297 #: kdevdesigner/designer/hierarchyview.cpp:1105 #: kdevdesigner/designer/hierarchyview.cpp:1109 #: kdevdesigner/designer/hierarchyview.cpp:1221 #: kdevdesigner/designer/sourcefile.cpp:141 #, c-format msgid "Edit %1" msgstr "编辑 %1" #: kdevdesigner/designer/formfile.cpp:328 #: kdevdesigner/designer/formwindow.cpp:1841 msgid "Save Form" msgstr "保存表单" #: kdevdesigner/designer/formfile.cpp:329 msgid "Save changes to form '%1'?" msgstr "将更改保存到表单“%1”吗?" #: kdevdesigner/designer/formfile.cpp:440 #, fuzzy msgid "Using ui.h File" msgstr "打开 ui.h 文件" #: kdevdesigner/designer/formfile.cpp:441 msgid "" "An \"ui.h\" file for this form already exists.\n" "Do you want to use it or create a new one?" msgstr "" #: kdevdesigner/designer/formfile.cpp:443 #, fuzzy msgid "Use Existing" msgstr "插入已有的文件" #: kdevdesigner/designer/formfile.cpp:443 #, fuzzy msgid "Create New" msgstr "创建新文件" #: kdevdesigner/designer/formfile.cpp:450 #, fuzzy msgid "Creating ui.h file" msgstr "打开 ui.h 文件" #: kdevdesigner/designer/formfile.cpp:451 #, fuzzy msgid "Do you want to create an new \"ui.h\" file?" msgstr "无法创建新文件。" #: kdevdesigner/designer/formfile.cpp:654 #: kdevdesigner/designer/sourcefile.cpp:266 #, fuzzy msgid "TQt Designer" msgstr "Qt 设计师" #: kdevdesigner/designer/formfile.cpp:655 #: kdevdesigner/designer/sourcefile.cpp:267 #, fuzzy msgid "" "File '%1' has been changed outside TQt Designer.\n" "Do you want to reload it?" msgstr "" "错误列表已经改变。\n" "您要保存您的修改吗?" #: kdevdesigner/designer/formfile.cpp:855 #: kdevdesigner/designer/sourcefile.cpp:280 #, fuzzy msgid "Invalid Filename" msgstr "文件名" #: kdevdesigner/designer/formfile.cpp:856 msgid "" "The project already contains a form with a\n" "filename of '%1'. Please choose a new filename." msgstr "" #: kdevdesigner/designer/formwindow.cpp:360 msgid "&Horizontal" msgstr "水平(&H)" #: kdevdesigner/designer/formwindow.cpp:361 #: languages/cpp/ccconfigwidgetbase.ui:660 #, no-c-format msgid "&Vertical" msgstr "垂直(&V)" #: kdevdesigner/designer/formwindow.cpp:380 #: kdevdesigner/designer/formwindow.cpp:507 msgid "" "A %1 (custom widget)

Click Edit Custom Widgets... in the " "Tools|Custom menu to add and change custom widgets. You can add " "properties as well as signals and slots to integrate custom widgets into " "TQt Designer, and provide a pixmap which will be used to represent " "the widget on the form.

" msgstr "" #: kdevdesigner/designer/formwindow.cpp:387 #: kdevdesigner/designer/formwindow.cpp:514 msgid "A %1 (custom widget)" msgstr "%1(自定义部件)" #: kdevdesigner/designer/formwindow.cpp:458 #, fuzzy msgid "Reparent Widgets" msgstr "删除方法(&D)" #: kdevdesigner/designer/formwindow.cpp:466 #: kdevdesigner/designer/formwindow.cpp:472 #: kdevdesigner/designer/formwindow.cpp:482 #, c-format msgid "Insert %1" msgstr "插入 %1" #: kdevdesigner/designer/formwindow.cpp:663 msgid "Set buddy for '%1' to..." msgstr "" #: kdevdesigner/designer/formwindow.cpp:665 msgid "Connect '%1' with..." msgstr "将“%1”连接到..." #: kdevdesigner/designer/formwindow.cpp:687 #: kdevdesigner/designer/formwindow.cpp:733 msgid "Change Tab Order" msgstr "更改 Tab 顺序" #: kdevdesigner/designer/formwindow.cpp:840 #: kdevdesigner/designer/formwindow.cpp:1329 #: kdevdesigner/designer/formwindow.cpp:1341 #: kdevdesigner/designer/sizehandle.cpp:216 msgid "%1/%2" msgstr "%1/%2" #: kdevdesigner/designer/formwindow.cpp:874 msgid "Connect '%1' to '%2'" msgstr "" #: kdevdesigner/designer/formwindow.cpp:902 msgid "Set buddy '%1' to '%2'" msgstr "" #: kdevdesigner/designer/formwindow.cpp:905 msgid "Set buddy '%1' to ..." msgstr "" #: kdevdesigner/designer/formwindow.cpp:963 #: kdevdesigner/designer/formwindow.cpp:1068 msgid "Inserting Widget" msgstr "插入部件" #: kdevdesigner/designer/formwindow.cpp:964 #: kdevdesigner/designer/formwindow.cpp:1069 msgid "" "You tried to insert a widget into the layout Container Widget '%1'.\n" "This is not possible. In order to insert the widget, the layout of '%1'\n" "must first be broken.\n" "Break the layout or cancel the operation?" msgstr "" #: kdevdesigner/designer/formwindow.cpp:971 #: kdevdesigner/designer/formwindow.cpp:1076 #: kdevdesigner/designer/kdevdesigner_part.cpp:159 #: kdevdesigner/designer/mainwindowactions.cpp:369 msgid "&Break Layout" msgstr "打乱布局(&B)" #: kdevdesigner/designer/formwindow.cpp:1047 #, c-format msgid "Set Buddy for %1" msgstr "设定的 %1 的好友" #: kdevdesigner/designer/formwindow.cpp:1313 #: kdevdesigner/designer/formwindow.cpp:1351 #, fuzzy msgid "Use Size Hint" msgstr "水平展开(&H)" #: kdevdesigner/designer/formwindow.cpp:1513 #: kdevdesigner/designer/formwindow.cpp:1525 #: kdevdesigner/designer/formwindow.cpp:1533 #: kdevdesigner/designer/mainwindowactions.cpp:326 #, fuzzy msgid "Adjust Size" msgstr "自定义" #: kdevdesigner/designer/formwindow.cpp:1743 msgid "Click widgets to change the tab order..." msgstr "" #: kdevdesigner/designer/formwindow.cpp:1754 msgid "Drag a line to create a connection..." msgstr "" #: kdevdesigner/designer/formwindow.cpp:1756 msgid "Drag a line to set a buddy..." msgstr "" #: kdevdesigner/designer/formwindow.cpp:1762 msgid "Click on the form to insert a %1..." msgstr "" #: kdevdesigner/designer/formwindow.cpp:1834 msgid "" "The following custom widgets are used in '%1',\n" "but are not known to TQt Designer:\n" msgstr "" #: kdevdesigner/designer/formwindow.cpp:1838 msgid "" "If you save this form and generate code for it using uic, \n" "the generated code will not compile.\n" "Do you want to save this form now?" msgstr "" #: kdevdesigner/designer/formwindow.cpp:1877 msgid "Lower" msgstr "小写" #: kdevdesigner/designer/formwindow.cpp:1936 #: kdevdesigner/designer/formwindow.cpp:1953 #: kdevdesigner/designer/mainwindowactions.cpp:185 msgid "Check Accelerators" msgstr "检查快捷键" #: kdevdesigner/designer/formwindow.cpp:1937 msgid "" "_n: Accelerator '%1' is used once.\n" "Accelerator '%1' is used %n times." msgstr "加速键“%1”使用了 %n 次。" #: kdevdesigner/designer/formwindow.cpp:1939 msgid "&Select" msgstr "选择(&S)" #: kdevdesigner/designer/formwindow.cpp:1954 msgid "No accelerator is used more than once." msgstr "没有使用多次的加速键。" #: kdevdesigner/designer/formwindow.cpp:1964 #, fuzzy msgid "Raise" msgstr "发布版本号" #: kdevdesigner/designer/formwindow.cpp:2002 #: kdevdesigner/designer/mainwindowactions.cpp:333 #, fuzzy msgid "Lay Out Horizontally" msgstr "水平展开(&H)" #: kdevdesigner/designer/formwindow.cpp:2012 #: kdevdesigner/designer/mainwindowactions.cpp:340 #, fuzzy msgid "Lay Out Vertically" msgstr "垂直展开(&V)" #: kdevdesigner/designer/formwindow.cpp:2022 #, fuzzy msgid "Lay Out Horizontally (in splitter)" msgstr "水平展开(&H)" #: kdevdesigner/designer/formwindow.cpp:2032 #, fuzzy msgid "Lay Out Vertically (in splitter)" msgstr "垂直展开(&V)" #: kdevdesigner/designer/formwindow.cpp:2045 #: kdevdesigner/designer/mainwindowactions.cpp:347 #, fuzzy msgid "Lay Out in a Grid" msgstr "垂直展开(&V)" #: kdevdesigner/designer/formwindow.cpp:2066 #, fuzzy msgid "Lay Out Children Horizontally" msgstr "水平展开(&H)" #: kdevdesigner/designer/formwindow.cpp:2087 #, fuzzy msgid "Lay Out Children Vertically" msgstr "垂直展开(&V)" #: kdevdesigner/designer/formwindow.cpp:2111 #, fuzzy msgid "Lay Out Children in a Grid" msgstr "垂直展开(&V)" #: kdevdesigner/designer/formwindow.cpp:2143 #: kdevdesigner/designer/formwindow.cpp:2163 #: kdevdesigner/designer/mainwindowactions.cpp:368 #, fuzzy msgid "Break Layout" msgstr "断点(&B)" #: kdevdesigner/designer/formwindow.cpp:2223 msgid "Edit connections..." msgstr "编辑连接..." #: kdevdesigner/designer/hierarchyview.cpp:191 #: languages/cpp/cppnewclassdlgbase.ui:162 parts/classview/classtreebase.cpp:51 #, no-c-format msgid "Class" msgstr "类" #: kdevdesigner/designer/hierarchyview.cpp:376 #: languages/sql/sqloutputwidget.cpp:121 msgid "Database" msgstr "数据库" #: kdevdesigner/designer/hierarchyview.cpp:630 #: kdevdesigner/designer/hierarchyview.cpp:637 #: kdevdesigner/designer/mainwindow.cpp:1805 #: kdevdesigner/designer/mainwindow.cpp:1824 #: kdevdesigner/designer/mainwindow.cpp:1844 #: kdevdesigner/designer/mainwindow.cpp:1884 #: kdevdesigner/designer/mainwindow.cpp:1945 #: kdevdesigner/designer/wizardeditorimpl.cpp:133 #, c-format msgid "Add Page to %1" msgstr "向 %1 添加页面" #: kdevdesigner/designer/hierarchyview.cpp:656 #: kdevdesigner/designer/hierarchyview.cpp:667 #: kdevdesigner/designer/mainwindow.cpp:1813 #: kdevdesigner/designer/mainwindow.cpp:1832 #: kdevdesigner/designer/mainwindow.cpp:1851 #: kdevdesigner/designer/mainwindow.cpp:1894 #: kdevdesigner/designer/mainwindow.cpp:1953 #: kdevdesigner/designer/wizardeditorimpl.cpp:151 msgid "Delete Page %1 of %2" msgstr "" #: kdevdesigner/designer/hierarchyview.cpp:753 msgid "Class Variables" msgstr "类变量" #: kdevdesigner/designer/editfunctions.ui:455 #: kdevdesigner/designer/hierarchyview.cpp:758 #: kdevdesigner/designer/hierarchyview.cpp:839 #: kdevdesigner/designer/hierarchyview.cpp:848 #: kdevdesigner/designer/variabledialog.ui:157 #, no-c-format msgid "private" msgstr "private" #: kdevdesigner/designer/customwidgeteditor.ui:775 #: kdevdesigner/designer/editfunctions.ui:445 #: kdevdesigner/designer/hierarchyview.cpp:762 #: kdevdesigner/designer/hierarchyview.cpp:843 #: kdevdesigner/designer/hierarchyview.cpp:852 #: kdevdesigner/designer/variabledialog.ui:147 #, no-c-format msgid "public" msgstr "public" #: kdevdesigner/designer/hierarchyview.cpp:835 msgid "Functions" msgstr "函数" #: kdevdesigner/designer/hierarchyview.cpp:846 #: kdevdesigner/designer/mainwindowactions.cpp:192 #, fuzzy msgid "Slots" msgstr "槽" #: kdevdesigner/designer/hierarchyview.cpp:1050 #: kdevdesigner/designer/hierarchyview.cpp:1055 #: kdevdesigner/designer/mainwindow.cpp:1680 #: parts/documentation/bookmarkview.cpp:126 #: parts/snippet/snippet_widget.cpp:557 parts/snippet/snippet_widget.cpp:559 msgid "Edit..." msgstr "编辑..." #: kdevdesigner/designer/hierarchyview.cpp:1052 msgid "New..." msgstr "新建..." #: kdevdesigner/designer/hierarchyview.cpp:1061 msgid "Goto Implementation" msgstr "转到实现" #: kdevdesigner/designer/hierarchyview.cpp:1151 msgid "Remove Variable" msgstr "删除变量" #: kdevdesigner/designer/hierarchyview.cpp:1201 #: kdevdesigner/designer/variabledialog.ui:41 #: kdevdesigner/designer/variabledialogimpl.cpp:103 #: kdevdesigner/designer/variabledialogimpl.cpp:122 #, no-c-format msgid "Edit Variables" msgstr "编辑变量" #: kdevdesigner/designer/hierarchyview.cpp:1202 msgid "This variable has already been declared." msgstr "此变量已经声明过。" #: kdevdesigner/designer/hierarchyview.cpp:1230 msgid "Add Variable" msgstr "添加变量" #: kdevdesigner/designer/hierarchyview.cpp:1247 msgid "Objects" msgstr "对象" #: kdevdesigner/designer/hierarchyview.cpp:1248 msgid "" "List of all widgets and objects of the current form in hierarchical order" msgstr "" #: kdevdesigner/designer/hierarchyview.cpp:1249 msgid "Members" msgstr "成员" #: kdevdesigner/designer/hierarchyview.cpp:1250 msgid "List of all members of the current form" msgstr "列出当前表单中的全部成员" #: kdevdesigner/designer/hierarchyview.cpp:1269 msgid "Class Declarations" msgstr "类声明" #: kdevdesigner/designer/hierarchyview.cpp:1270 msgid "List of all classes and its declarations of the current source file" msgstr "" #: buildtools/qmake/newwidgetdlgbase.ui:143 #: kdevdesigner/designer/iconvieweditorimpl.cpp:63 #: kdevdesigner/designer/listboxeditorimpl.cpp:89 #: kdevdesigner/designer/widgetfactory.cpp:740 #: kdevdesigner/designer/widgetfactory.cpp:767 #: kdevdesigner/designer/widgetfactory.cpp:776 #: vcs/subversion/svn_commitdlgbase.ui:36 #, no-c-format msgid "New Item" msgstr "新建项目" #: kdevdesigner/designer/iconvieweditorimpl.cpp:132 #: kdevdesigner/designer/listboxeditorimpl.cpp:164 msgid "Edit the Items of '%1'" msgstr "编辑“%1”的项目" #: kdevdesigner/designer/kdevdesigner_part.cpp:98 src/partcontroller.cpp:137 msgid "Save Al&l" msgstr "全部保存(&L)" #: kdevdesigner/designer/kdevdesigner_part.cpp:100 #: kdevdesigner/designer/mainwindowactions.cpp:740 msgid "Create &Template..." msgstr "创建模板(&T)..." #: kdevdesigner/designer/kdevdesigner_part.cpp:116 #: kdevdesigner/designer/mainwindowactions.cpp:186 msgid "Chec&k Accelerators" msgstr "检查快捷键(&K)" #: kdevdesigner/designer/kdevdesigner_part.cpp:118 #: kdevdesigner/designer/mainwindowactions.cpp:193 msgid "S&lots..." msgstr "槽(&L)..." #: kdevdesigner/designer/kdevdesigner_part.cpp:120 #: kdevdesigner/designer/mainwindowactions.cpp:200 msgid "Co&nnections..." msgstr "连接(&N)..." #: kdevdesigner/designer/kdevdesigner_part.cpp:122 #: kdevdesigner/designer/mainwindowactions.cpp:214 msgid "&Form Settings..." msgstr "表单设置(&F)..." #: kdevdesigner/designer/kdevdesigner_part.cpp:125 #: kdevdesigner/designer/mainwindowactions.cpp:808 msgid "&Add File..." msgstr "添加文件(&A)..." #: kdevdesigner/designer/kdevdesigner_part.cpp:127 #: kdevdesigner/designer/mainwindowactions.cpp:819 msgid "&Image Collection..." msgstr "图像收藏(&I)..." #: kdevdesigner/designer/kdevdesigner_part.cpp:129 #: kdevdesigner/designer/mainwindowactions.cpp:829 msgid "&Database Connections..." msgstr "数据库连接(&D)..." #: kdevdesigner/designer/kdevdesigner_part.cpp:131 msgid "&Designer Project Settings..." msgstr "设计师工程设置(&D)..." #: kdevdesigner/designer/kdevdesigner_part.cpp:135 #: kdevdesigner/designer/mainwindowactions.cpp:432 msgid "&Pointer" msgstr "指针(&P)" #: kdevdesigner/designer/kdevdesigner_part.cpp:138 #: kdevdesigner/designer/mainwindowactions.cpp:440 msgid "&Connect Signal/Slots" msgstr "" #: kdevdesigner/designer/kdevdesigner_part.cpp:140 #: kdevdesigner/designer/mainwindowactions.cpp:448 msgid "Tab &Order" msgstr "Tab 顺序(&O)" #: kdevdesigner/designer/kdevdesigner_part.cpp:142 #: kdevdesigner/designer/mainwindowactions.cpp:455 msgid "Set &Buddy" msgstr "" #: kdevdesigner/designer/kdevdesigner_part.cpp:144 #: kdevdesigner/designer/mainwindowactions.cpp:605 msgid "Configure Toolbox..." msgstr "配置工具箱..." #: kdevdesigner/designer/kdevdesigner_part.cpp:145 #: kdevdesigner/designer/mainwindowactions.cpp:490 msgid "Edit &Custom Widgets..." msgstr "编辑自定义部件(&C)..." #: kdevdesigner/designer/kdevdesigner_part.cpp:147 #: kdevdesigner/designer/mainwindowactions.cpp:327 msgid "Adjust &Size" msgstr "" #: kdevdesigner/designer/kdevdesigner_part.cpp:149 #: kdevdesigner/designer/mainwindowactions.cpp:334 #, fuzzy msgid "Lay Out &Horizontally" msgstr "水平展开(&H)" #: kdevdesigner/designer/kdevdesigner_part.cpp:151 #: kdevdesigner/designer/mainwindowactions.cpp:341 #, fuzzy msgid "Lay Out &Vertically" msgstr "垂直展开(&V)" #: kdevdesigner/designer/kdevdesigner_part.cpp:153 #, fuzzy msgid "Lay Out in &Grid" msgstr "垂直展开(&V)" #: kdevdesigner/designer/kdevdesigner_part.cpp:155 #: kdevdesigner/designer/mainwindowactions.cpp:355 #, fuzzy msgid "Lay Out Horizontally (in S&plitter)" msgstr "水平展开(&H)" #: kdevdesigner/designer/kdevdesigner_part.cpp:157 #: kdevdesigner/designer/mainwindowactions.cpp:362 #, fuzzy msgid "Lay Out Vertically (in Sp&litter)" msgstr "垂直展开(&V)" #: kdevdesigner/designer/kdevdesigner_part.cpp:161 msgid "Add Spacer" msgstr "添加分隔符" #: kdevdesigner/designer/kdevdesigner_part.cpp:164 #: kdevdesigner/designer/mainwindowactions.cpp:857 msgid "Preview &Form" msgstr "预览表单(&F)" #: kdevdesigner/designer/kdevdesigner_part.cpp:166 msgid "Ne&xt Form" msgstr "下一个表单(&X)" #: kdevdesigner/designer/kdevdesigner_part.cpp:168 msgid "Pre&vious Form" msgstr "上一个表单(&V)" #: kdevdesigner/designer/kdevdesigner_part.cpp:172 msgid "Configure &KDevDesigner..." msgstr "配置 &KDevDesigner..." #: kdevdesigner/designer/kdevdesigner_part.cpp:277 msgid "KDevDesignerPart" msgstr "KDevDesignerPart" #: kdevdesigner/designer/listvieweditorimpl.cpp:130 msgid "Edit the Items and Columns of '%1'" msgstr "编辑“%1”的项目和列" #: kdevdesigner/designer/listvieweditorimpl.cpp:287 msgid "New Column" msgstr "新建列" #: kdevdesigner/designer/listvieweditorimpl.cpp:399 msgid "Item" msgstr "项目" #: kdevdesigner/designer/listvieweditorimpl.cpp:417 msgid "Subitem" msgstr "子项目" #: kdevdesigner/designer/listvieweditor.ui:68 #: kdevdesigner/designer/listvieweditorimpl.cpp:631 #, no-c-format msgid "&Items" msgstr "项目(&I)" #: kdevdesigner/designer/mainwindow.cpp:155 #: kdevdesigner/designer/startdialogimpl.cpp:170 #, fuzzy msgid "TQt User-Interface Files (*.ui)" msgstr "主要用户界面模式(&U)" #: kdevdesigner/designer/mainwindow.cpp:205 msgid "" "Ready - This is the non-commercial version of TQt - For commercial " "evaluations, use the help menu to register with Trolltech." msgstr "" #: kdevdesigner/designer/mainwindow.cpp:224 #: kdevdesigner/designer/mainwindowactions.cpp:376 msgid "Layout" msgstr "布局" #: kdevdesigner/designer/mainwindow.cpp:361 #: kdevdesigner/designer/mainwindow.cpp:3747 msgid "Property Editor/Signal Handlers" msgstr "" #: kdevdesigner/designer/mainwindow.cpp:363 msgid "" "The Property Editor

You can change the appearance and behavior of " "the selected widget in the property editor.

You can set properties for " "components and forms at design time and see the immediately see the effects " "of the changes. Each property has its own editor which (depending on the " "property) can be used to enter new values, open a special dialog, or to " "select values from a predefined list. Click F1 to get detailed help " "for the selected property.

You can resize the columns of the editor by " "dragging the separators in the list's header.

Signal Handlers

In the Signal Handlers tab you can define connections between the " "signals emitted by widgets and the slots in the form. (These connections can " "also be made using the connection tool.)" msgstr "" #: kdevdesigner/designer/mainwindow.cpp:390 msgid "Output Window" msgstr "输出窗口" #: kdevdesigner/designer/mainwindow.cpp:404 msgid "Object Explorer" msgstr "对象资源管理器" #: kdevdesigner/designer/mainwindow.cpp:407 msgid "" "The Object Explorer

The Object Explorer provides an overview of the " "relationships between the widgets in a form. You can use the clipboard " "functions using a context menu for each item in the view. It is also useful " "for selecting widgets in forms that have complex layouts.

The columns " "can be resized by dragging the separator in the list's header.

The " "second tab shows all the form's slots, class variables, includes, etc.

" msgstr "" #: kdevdesigner/designer/mainwindow.cpp:424 msgid "Start typing the buffer you want to switch to here (ALT+B)" msgstr "" #: kdevdesigner/designer/mainwindow.cpp:433 msgid "Project Overview" msgstr "工程概览" #: kdevdesigner/designer/mainwindow.cpp:434 msgid "" "The Project Overview Window

The Project Overview Window displays " "all the current project, including forms and source files.

Use the " "search field to rapidly switch between files.

" msgstr "" #: kdevdesigner/designer/mainwindow.cpp:451 msgid "Action Editor" msgstr "动作编辑器" #: kdevdesigner/designer/mainwindow.cpp:452 msgid "" "The Action Editor

The Action Editor is used to add actions and " "action groups to a form, and to connect actions to slots. Actions and action " "groups can be dragged into menus and into toolbars, and may feature keyboard " "shortcuts and tooltips. If actions have pixmaps these are displayed on " "toolbar buttons and besides their names in menus.

" msgstr "" #: kdevdesigner/designer/mainwindow.cpp:472 msgid "Toolbox" msgstr "工具箱" #: kdevdesigner/designer/mainwindow.cpp:1281 msgid "" "The Form Window

Use the various tools to add widgets or to change " "the layout and behavior of the components in the form. Select one or " "multiple widgets to move them or lay them out. If a single widget is chosen " "it can be resized using the resize handles.

Changes in the Property " "Editor are visible at design time, and you can preview the form in " "different styles.

You can change the grid resolution, or turn the grid " "off in the Preferences dialog in the Edit menu.

You can have " "several forms open, and all open forms are listed in the Form List." msgstr "" #: kdevdesigner/designer/mainwindow.cpp:1336 #: parts/appwizard/appwizarddlg.cpp:923 msgid "New Project" msgstr "新建工程" #: kdevdesigner/designer/mainwindow.cpp:1336 msgid "Cannot create an invalid project." msgstr "无法创建无效工程。" #: kdevdesigner/designer/mainwindow.cpp:1487 #, c-format msgid "&Undo: %1" msgstr "撤消(&U):%1" #: kdevdesigner/designer/mainwindow.cpp:1489 #: kdevdesigner/designer/mainwindowactions.cpp:127 msgid "&Undo: Not Available" msgstr "撤消(&U):不可用" #: kdevdesigner/designer/mainwindow.cpp:1491 #, c-format msgid "&Redo: %1" msgstr "重做(&R):%1" #: kdevdesigner/designer/mainwindow.cpp:1493 #: kdevdesigner/designer/mainwindowactions.cpp:133 msgid "&Redo: Not Available" msgstr "重做(&R):不可用" #: kdevdesigner/designer/mainwindow.cpp:1580 msgid "Choose Pixmap..." msgstr "选择像素图..." #: kdevdesigner/designer/mainwindow.cpp:1584 msgid "Edit Text..." msgstr "编辑文本..." #: kdevdesigner/designer/mainwindow.cpp:1588 msgid "Edit Title..." msgstr "编辑标题..." #: kdevdesigner/designer/mainwindow.cpp:1592 #: kdevdesigner/designer/mainwindow.cpp:1702 msgid "Edit Page Title..." msgstr "编辑页面标题..." #: kdevdesigner/designer/mainwindow.cpp:1623 #: kdevdesigner/designer/mainwindow.cpp:1637 #: kdevdesigner/designer/mainwindow.cpp:1646 #: kdevdesigner/designer/mainwindow.cpp:1661 #: kdevdesigner/designer/mainwindow.cpp:1695 #: kdevdesigner/designer/mainwindow.cpp:2469 msgid "Delete Page" msgstr "删除页面" #: kdevdesigner/designer/mainwindow.cpp:1626 #: kdevdesigner/designer/mainwindow.cpp:1640 #: kdevdesigner/designer/mainwindow.cpp:1649 #: kdevdesigner/designer/mainwindow.cpp:1664 #: kdevdesigner/designer/mainwindow.cpp:1699 #: kdevdesigner/designer/mainwindow.cpp:2468 msgid "Add Page" msgstr "添加页面" #: kdevdesigner/designer/mainwindow.cpp:1632 msgid "Previous Page" msgstr "上一页" #: kdevdesigner/designer/mainwindow.cpp:1634 msgid "Next Page" msgstr "下一页" #: kdevdesigner/designer/mainwindow.cpp:1667 msgid "Rename Current Page..." msgstr "重命名当前页..." #: kdevdesigner/designer/mainwindow.cpp:1705 msgid "Edit Pages..." msgstr "编辑页面..." #: kdevdesigner/designer/mainwindow.cpp:1711 msgid "Add Menu Item" msgstr "添加菜单项" #: kdevdesigner/designer/mainwindow.cpp:1713 msgid "Add Toolbar" msgstr "添加工具栏" #: kdevdesigner/designer/mainwindow.cpp:1735 #: kdevdesigner/designer/mainwindow.cpp:2638 #: kdevdesigner/designer/paletteeditoradvanced.ui:202 #, no-c-format msgid "Text" msgstr "文本" #: kdevdesigner/designer/mainwindow.cpp:1735 #: kdevdesigner/designer/mainwindow.cpp:2638 msgid "New text" msgstr "新建文本" #: kdevdesigner/designer/mainwindow.cpp:1740 #: kdevdesigner/designer/mainwindow.cpp:2643 msgid "Set 'wordwrap' of '%1'" msgstr "设定“%1”的“wordwrap”" #: kdevdesigner/designer/mainwindow.cpp:1749 #: kdevdesigner/designer/mainwindow.cpp:2652 msgid "Set the 'text' of '%1'" msgstr "设定“%1”的“text”" #: kdevdesigner/designer/mainwindow.cpp:1759 #: kdevdesigner/designer/mainwindow.cpp:2665 #: parts/documentation/bookmarkview.cpp:118 #: parts/documentation/docconfiglistview.cpp:32 #: parts/documentation/searchview.cpp:74 parts/documentation/searchview.cpp:99 msgid "Title" msgstr "标题" #: kdevdesigner/designer/mainwindow.cpp:1759 #: kdevdesigner/designer/mainwindow.cpp:2665 msgid "New title" msgstr "新建标题" #: kdevdesigner/designer/mainwindow.cpp:1762 #: kdevdesigner/designer/mainwindow.cpp:2667 msgid "Set the 'title' of '%2'" msgstr "设定“%2”的“title”" #: kdevdesigner/designer/mainwindow.cpp:1772 #: kdevdesigner/designer/mainwindow.cpp:1909 #: kdevdesigner/designer/mainwindow.cpp:1968 msgid "Page Title" msgstr "页面标题" #: kdevdesigner/designer/mainwindow.cpp:1772 #: kdevdesigner/designer/mainwindow.cpp:1909 #: kdevdesigner/designer/mainwindow.cpp:1968 msgid "New page title" msgstr "新建页面标题" #: kdevdesigner/designer/mainwindow.cpp:1775 msgid "Set the 'pageTitle' of '%2'" msgstr "设定“%2”的“pageTitle”" #: kdevdesigner/designer/mainwindow.cpp:1788 msgid "Set the 'pixmap' of '%2'" msgstr "设定“%2”的“pixmap”" #: kdevdesigner/designer/mainwindow.cpp:1859 msgid "Raise next page of '%2'" msgstr "" #: kdevdesigner/designer/mainwindow.cpp:1869 msgid "Raise previous page of '%2'" msgstr "" #: kdevdesigner/designer/mainwindow.cpp:1916 msgid "Rename Page %1 to %2" msgstr "将页面 %1 重命名为 %2" #: kdevdesigner/designer/mainwindow.cpp:1971 #: kdevdesigner/designer/wizardeditorimpl.cpp:220 msgid "Rename page %1 of %2" msgstr "" #: kdevdesigner/designer/mainwindow.cpp:1983 msgid "Add Toolbar to '%1'" msgstr "将工具栏添加到“%1”" #: kdevdesigner/designer/mainwindow.cpp:1989 msgid "Add Menu to '%1'" msgstr "将菜单添加到“%1”" #: kdevdesigner/designer/mainwindow.cpp:2515 #: kdevdesigner/designer/mainwindowactions.cpp:1127 msgid "Save Project Settings" msgstr "保存工程设置" #: kdevdesigner/designer/mainwindow.cpp:2516 #: kdevdesigner/designer/mainwindowactions.cpp:1128 #: kdevdesigner/designer/sourcefile.cpp:223 msgid "Save changes to '%1'?" msgstr "将更改保存到“%1”吗?" #: kdevdesigner/designer/mainwindow.cpp:2600 #: kdevdesigner/designer/propertyeditor.cpp:4086 msgid "Add Connection" msgstr "添加连接" #: kdevdesigner/designer/mainwindow.cpp:2613 msgid "Edit %1..." msgstr "编辑 %1..." #: kdevdesigner/designer/mainwindow.cpp:2709 msgid "Insert a %1 (custom widget)" msgstr "插入%1(自定义部件)" #: kdevdesigner/designer/mainwindow.cpp:2710 msgid "" "%1 (custom widget)

Click Edit Custom Widgets... in the " "Tools|Custom menu to add and change custom widgets. You can add " "properties as well as signals and slots to integrate them into TQt Designer, " "and provide a pixmap which will be used to represent the widget on the form." "

" msgstr "" #: kdevdesigner/designer/mainwindow.cpp:2844 msgid "Restoring Last Session" msgstr "恢复上次会话" #: kdevdesigner/designer/mainwindow.cpp:2845 msgid "" "TQt Designer found some temporary saved files, which were\n" "written when TQt Designer crashed last time. Do you want to\n" "load these files?" msgstr "" #: kdevdesigner/designer/mainwindow.cpp:2909 msgid "There is no help available for this dialog at the moment." msgstr "" #: kdevdesigner/designer/mainwindow.cpp:2968 #: kdevdesigner/designer/mainwindowactions.cpp:1762 #: kdevdesigner/designer/mainwindowactions.cpp:1785 msgid "Edit Source" msgstr "编辑源代码" #: kdevdesigner/designer/mainwindow.cpp:2969 #: kdevdesigner/designer/mainwindowactions.cpp:1763 #: kdevdesigner/designer/mainwindowactions.cpp:1786 msgid "" "There is no plugin for editing %1 code installed.\n" "Note: Plugins are not available in static TQt configurations." msgstr "" #: kdevdesigner/designer/mainwindow.cpp:3069 msgid "Open File" msgstr "打开文件" #: kdevdesigner/designer/mainwindow.cpp:3070 #: kdevdesigner/designer/mainwindow.cpp:3086 msgid "Could not open '%1'. File does not exist." msgstr "无法打开“%1”。文件不存在。" #: kdevdesigner/designer/mainwindow.cpp:3085 src/projectmanager.cpp:135 msgid "Open Project" msgstr "打开工程" #: kdevdesigner/designer/mainwindow.cpp:3710 #: kdevdesigner/designer/propertyeditor.cpp:4319 #, fuzzy msgid "Signal Handlers" msgstr "特殊头文件(&H)" #: kdevdesigner/designer/kdevdesigner_part.rc:47 #: kdevdesigner/designer/kdevdesigner_part_sh.rc:55 #: kdevdesigner/designer/mainwindow.cpp:3734 #: kdevdesigner/designer/mainwindowactions.cpp:409 #: kdevdesigner/designer/multilineeditorimpl.cpp:130 #, no-c-format msgid "&Layout" msgstr "布局(&L)" #: kdevdesigner/designer/mainwindow.cpp:3735 #: kdevdesigner/designer/mainwindowactions.cpp:855 msgid "&Preview" msgstr "预览(&P)" #: kdevdesigner/designer/mainwindowactions.cpp:128 msgid "Undoes the last action" msgstr "撤消上次操作" #: kdevdesigner/designer/mainwindowactions.cpp:134 #, fuzzy msgid "Redoes the last undone operation" msgstr "进行 CVS 操作时忽略此文件" #: kdevdesigner/designer/mainwindowactions.cpp:139 msgid "Cu&t" msgstr "剪切(&T)" #: kdevdesigner/designer/mainwindowactions.cpp:140 msgid "Cuts the selected widgets and puts them on the clipboard" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:146 #, fuzzy msgid "Copies the selected widgets to the clipboard" msgstr "去掉所有选中的文件。" #: kdevdesigner/designer/mainwindowactions.cpp:152 msgid "Pastes the clipboard's contents" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:158 msgid "Deletes the selected widgets" msgstr "删除选中的部件" #: kdevdesigner/designer/mainwindowactions.cpp:167 msgid "Select &All" msgstr "全部选中(&A)" #: kdevdesigner/designer/mainwindowactions.cpp:168 msgid "Selects all widgets" msgstr "选择全部部件" #: kdevdesigner/designer/mainwindowactions.cpp:173 msgid "Bring to Front" msgstr "提到最前" #: kdevdesigner/designer/mainwindowactions.cpp:173 msgid "Bring to &Front" msgstr "提到最前(&F)" #: kdevdesigner/designer/mainwindowactions.cpp:174 #: kdevdesigner/designer/mainwindowactions.cpp:175 #, fuzzy msgid "Raises the selected widgets" msgstr "去掉所有选中的文件。" #: kdevdesigner/designer/mainwindowactions.cpp:179 msgid "Send to Back" msgstr "推到最后" #: kdevdesigner/designer/mainwindowactions.cpp:179 msgid "Send to &Back" msgstr "推到最后(&B)" #: kdevdesigner/designer/mainwindowactions.cpp:180 #: kdevdesigner/designer/mainwindowactions.cpp:181 #, fuzzy msgid "Lowers the selected widgets" msgstr "去掉所有选中的文件。" #: kdevdesigner/designer/mainwindowactions.cpp:187 msgid "Checks if the accelerators used in the form are unique" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:194 msgid "Opens a dialog for editing slots" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:199 msgid "Connections" msgstr "连接" #: kdevdesigner/designer/mainwindowactions.cpp:201 msgid "Opens a dialog for editing connections" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:206 #: vcs/subversion/svn_copydlgwidget.ui:178 #, no-c-format msgid "Source" msgstr "源文件" #: kdevdesigner/designer/mainwindowactions.cpp:207 msgid "&Source..." msgstr "源文件(&S)..." #: kdevdesigner/designer/mainwindowactions.cpp:208 msgid "Opens an editor to edit the form's source code" msgstr "" #: kdevdesigner/designer/formsettings.ui:41 #: kdevdesigner/designer/mainwindowactions.cpp:213 #, no-c-format msgid "Form Settings" msgstr "表单设置" #: kdevdesigner/designer/mainwindowactions.cpp:215 msgid "Opens a dialog to change the form's settings" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:220 #: kdevdesigner/designer/preferences.ui:41 #, no-c-format msgid "Preferences" msgstr "首选项" #: kdevdesigner/designer/mainwindowactions.cpp:221 msgid "Preferences..." msgstr "首选项..." #: kdevdesigner/designer/mainwindowactions.cpp:222 #, fuzzy msgid "Opens a dialog to change preferences" msgstr "导入的数据参照" #: kdevdesigner/designer/mainwindowactions.cpp:271 msgid "Find" msgstr "查找" #: kdevdesigner/designer/mainwindowactions.cpp:277 #, fuzzy msgid "Find Incremental" msgstr "文档" #: kdevdesigner/designer/mainwindowactions.cpp:278 #, fuzzy msgid "Find &Incremental" msgstr "文档" #: kdevdesigner/designer/gotolinedialog.ui:46 #: kdevdesigner/designer/mainwindowactions.cpp:289 #, no-c-format msgid "Goto Line" msgstr "转到行" #: kdevdesigner/designer/mainwindowactions.cpp:290 msgid "&Goto Line..." msgstr "转到行(&G)..." #: kdevdesigner/designer/mainwindowactions.cpp:302 msgid "Incremental search (Alt+I)" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:310 #: parts/partexplorer/partexplorerform.cpp:129 msgid "&Search" msgstr "搜索(&S)" #: kdevdesigner/designer/mainwindowactions.cpp:328 #, fuzzy msgid "Adjusts the size of the selected widget" msgstr "删除选中的项目" #: kdevdesigner/designer/mainwindowactions.cpp:335 msgid "Lays out the selected widgets horizontally" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:342 msgid "Lays out the selected widgets vertically" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:348 #, fuzzy msgid "Lay Out in a &Grid" msgstr "垂直展开(&V)" #: kdevdesigner/designer/mainwindowactions.cpp:349 msgid "Lays out the selected widgets in a grid" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:354 #, fuzzy msgid "Lay Out Horizontally (in Splitter)" msgstr "水平展开(&H)" #: kdevdesigner/designer/mainwindowactions.cpp:356 msgid "Lays out the selected widgets horizontally in a splitter" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:361 #, fuzzy msgid "Lay Out Vertically (in Splitter)" msgstr "垂直展开(&V)" #: kdevdesigner/designer/mainwindowactions.cpp:363 msgid "Lays out the selected widgets vertically in a splitter" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:370 #, fuzzy msgid "Breaks the selected layout" msgstr "删除选中的项目" #: kdevdesigner/designer/mainwindowactions.cpp:379 #, c-format msgid "Add %1" msgstr "添加 %1" #: kdevdesigner/designer/mainwindowactions.cpp:382 #: kdevdesigner/designer/mainwindowactions.cpp:555 #, c-format msgid "Insert a %1" msgstr "插入 %1" #: kdevdesigner/designer/mainwindowactions.cpp:383 msgid "" "A %1

%2

Click to insert a single %3,or double click to keep " "the tool selected." msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:395 #, c-format msgid "The Layout toolbar%1" msgstr "布局工具栏%1" #: kdevdesigner/designer/mainwindowactions.cpp:431 msgid "Pointer" msgstr "指针" #: kdevdesigner/designer/mainwindowactions.cpp:435 msgid "Selects the pointer tool" msgstr "选择指针工具" #: kdevdesigner/designer/mainwindowactions.cpp:438 msgid "Connect Signal/Slots" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:444 msgid "Selects the connection tool" msgstr "选择连接工具" #: kdevdesigner/designer/mainwindowactions.cpp:447 msgid "Tab Order" msgstr "Tab 顺序" #: kdevdesigner/designer/mainwindowactions.cpp:451 msgid "Selects the tab order tool" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:454 msgid "Set Buddy" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:458 msgid "Sets a buddy to a label" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:464 #, c-format msgid "The Tools toolbar%1" msgstr "工具工具栏%1" #: kdevdesigner/designer/mainwindowactions.cpp:466 msgid "Tools" msgstr "工具" #: kdevdesigner/designer/mainwindowactions.cpp:488 msgid "Custom Widgets" msgstr "自定义部件" #: kdevdesigner/designer/mainwindowactions.cpp:491 msgid "Opens a dialog to add and change custom widgets" msgstr "打开对话框以添加并更改自定义部件" #: kdevdesigner/designer/mainwindowactions.cpp:508 msgid "The %1%2" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:509 #, c-format msgid "" " Click on a button to insert a single widget, or double click to insert " "multiple %1." msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:512 msgid "The %1 Widgets%2" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:513 msgid "" " Click on a button to insert a single %1 widget, or double click to insert " "multiple widgets." msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:557 msgid "A %1" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:560 msgid "

Double click on this tool to keep it selected.

" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:579 msgid "" "The Custom Widgets toolbar%1

Click Edit Custom Widgets...in " "the Tools|Custom menu to add and change custom widgets

" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:584 msgid "" " Click on the buttons to insert a single widget, or double click to insert " "multiple widgets." msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:586 #: parts/appwizard/appwizarddlg.cpp:575 parts/appwizard/appwizarddlgbase.ui:461 #, no-c-format msgid "Custom" msgstr "自定义" #: kdevdesigner/designer/configtoolboxdialog.ui:41 #: kdevdesigner/designer/mainwindowactions.cpp:605 #, no-c-format msgid "Configure Toolbox" msgstr "配置工具箱" #: kdevdesigner/designer/mainwindowactions.cpp:606 msgid "Opens a dialog to configure the common widgets page of the toolbox" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:620 #, c-format msgid "The File toolbar%1" msgstr "文件工具栏%1" #: buildtools/qmake/projectconfigurationdlgbase.ui:1974 #: kdevdesigner/designer/mainwindowactions.cpp:629 #: kdevdesigner/designer/mainwindowactions.cpp:644 #, no-c-format msgid "New" msgstr "新建" #: kdevdesigner/designer/mainwindowactions.cpp:630 msgid "New dialog or file" msgstr "新建对话框或文件" #: kdevdesigner/designer/mainwindowactions.cpp:631 #: kdevdesigner/designer/mainwindowactions.cpp:645 msgid "&New..." msgstr "新建(&N)..." #: kdevdesigner/designer/mainwindowactions.cpp:634 msgid "Creates a new project, form or source file." msgstr "创建新工程、表单或源文件。" #: kdevdesigner/designer/mainwindowactions.cpp:647 msgid "Creates a new dialog or file" msgstr "创建新对话框或文件" #: kdevdesigner/designer/mainwindowactions.cpp:651 msgid "New Dialog" msgstr "新建对话框" #: kdevdesigner/designer/mainwindowactions.cpp:652 msgid "&Dialog..." msgstr "对话框(&D)..." #: kdevdesigner/designer/mainwindowactions.cpp:655 msgid "Creates a new dialog." msgstr "创建新对话框。" #: kdevdesigner/designer/mainwindowactions.cpp:660 msgid "&File..." msgstr "文件&F)..." #: kdevdesigner/designer/mainwindowactions.cpp:663 msgid "Creates a new file." msgstr "创建新文件。" #: kdevdesigner/designer/mainwindowactions.cpp:678 msgid "Opens an existing project, form or source file " msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:692 msgid "Closes the current project or document" msgstr "关闭当前工程或文档" #: kdevdesigner/designer/mainwindowactions.cpp:707 msgid "Saves the current project or document" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:717 msgid "Save &As..." msgstr "另存为(&A)..." #: kdevdesigner/designer/mainwindowactions.cpp:718 msgid "Saves the current form with a new filename" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:727 msgid "Save All" msgstr "全部保存" #: kdevdesigner/designer/mainwindowactions.cpp:728 msgid "Sa&ve All" msgstr "全部保存(&V)" #: kdevdesigner/designer/mainwindowactions.cpp:729 msgid "Saves all open documents" msgstr "保存全部文档" #: kdevdesigner/designer/createtemplate.ui:41 #: kdevdesigner/designer/mainwindowactions.cpp:739 #: kdevdesigner/designer/mainwindowactions.cpp:1451 #: kdevdesigner/designer/mainwindowactions.cpp:1472 #, no-c-format msgid "Create Template" msgstr "创建模板" #: kdevdesigner/designer/mainwindowactions.cpp:741 msgid "Creates a new template" msgstr "创建新模板" #: kdevdesigner/designer/mainwindowactions.cpp:754 msgid "Recently Opened Files " msgstr "最近打开的文件" #: kdevdesigner/designer/mainwindowactions.cpp:755 msgid "Recently Opened Projects" msgstr "最近打开的工程" #: kdevdesigner/designer/mainwindowactions.cpp:773 msgid "Exit" msgstr "退出" #: kdevdesigner/designer/mainwindowactions.cpp:775 msgid "" "Quits the application and prompts to save any changed forms, source files or " "project settings" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:788 msgid "Pr&oject" msgstr "工程(&O)" #: kdevdesigner/designer/mainwindowactions.cpp:791 #: kdevdesigner/designer/mainwindowactions.cpp:792 msgid "Active Project" msgstr "当前工程" #: kdevdesigner/designer/mainwindowactions.cpp:797 #: kdevdesigner/designer/mainwindowactions.cpp:798 #: kdevdesigner/designer/newformimpl.cpp:364 #: kdevdesigner/designer/startdialogimpl.cpp:67 #: kdevdesigner/designer/workspace.cpp:159 msgid "" msgstr "<无工程>" #: kdevdesigner/designer/mainwindowactions.cpp:808 msgid "Add File" msgstr "添加文件" #: kdevdesigner/designer/mainwindowactions.cpp:810 msgid "Adds a file to the current project" msgstr "将文件添加到当前工程中" #: kdevdesigner/designer/mainwindowactions.cpp:818 msgid "Image Collection..." msgstr "图像库..." #: kdevdesigner/designer/mainwindowactions.cpp:820 msgid "Opens a dialog for editing the current project's image collection" msgstr "打开编辑当前工程图像收藏的对话框" #: kdevdesigner/designer/mainwindowactions.cpp:828 msgid "Database Connections..." msgstr "数据库连接..." #: kdevdesigner/designer/mainwindowactions.cpp:830 msgid "Opens a dialog for editing the current project's database connections" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:839 msgid "Project Settings..." msgstr "工程设置..." #: kdevdesigner/designer/mainwindowactions.cpp:840 msgid "&Project Settings..." msgstr "工程设置(&P)..." #: kdevdesigner/designer/mainwindowactions.cpp:841 msgid "Opens a dialog to change the project's settings" msgstr "打开更改工程设置的对话框" #: kdevdesigner/designer/mainwindowactions.cpp:857 msgid "Preview Form" msgstr "预览表单" #: kdevdesigner/designer/mainwindowactions.cpp:860 msgid "Opens a preview" msgstr "打开预览" #: kdevdesigner/designer/mainwindowactions.cpp:874 msgid "" "The preview will use the Motif look and feel which is used as the default " "style on most UNIX systems." msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:876 msgid "The preview will use the Windows look and feel." msgstr "预览将使用 Windows 观感。" #: kdevdesigner/designer/mainwindowactions.cpp:878 msgid "" "The preview will use the Platinum look and feel which is similar to the " "Macintosh GUI style." msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:880 msgid "" "The preview will use the CDE look and feel which is similar to some versions " "of the Common Desktop Environment." msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:882 msgid "" "The preview will use the Motif look and feel which is used as the default " "style on SGI systems." msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:884 msgid "" "The preview will use the advanced Motif look and feel used by the GIMP " "toolkit (GTK) on Linux." msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:886 msgid "Preview Form in %1 Style" msgstr "以 %1 样式预览表单" #: kdevdesigner/designer/mainwindowactions.cpp:887 msgid "... in %1 Style" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:888 msgid "Opens a preview in %1 style" msgstr "以 %1 样式预览" #: kdevdesigner/designer/mainwindowactions.cpp:889 msgid "" "Open a preview in %1 style.

Use the preview to test the design and " "signal-slot connections of the current form. %2

" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:905 msgid "Tile" msgstr "平铺" #: kdevdesigner/designer/mainwindowactions.cpp:905 msgid "&Tile" msgstr "平铺(&T)" #: kdevdesigner/designer/mainwindowactions.cpp:906 msgid "Tiles the windows so that they are all visible" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:909 msgid "Cascade" msgstr "层叠" #: kdevdesigner/designer/mainwindowactions.cpp:909 msgid "&Cascade" msgstr "层叠(&C)" #: kdevdesigner/designer/mainwindowactions.cpp:910 msgid "Cascades the windows so that all their title bars are visible" msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:914 msgid "Cl&ose" msgstr "关闭(&O)" #: kdevdesigner/designer/mainwindowactions.cpp:915 msgid "Closes the active window" msgstr "关闭当前窗口" #: kdevdesigner/designer/mainwindowactions.cpp:919 src/partcontroller.cpp:152 msgid "Close All" msgstr "全部关闭" #: kdevdesigner/designer/mainwindowactions.cpp:919 msgid "Close Al&l" msgstr "全部关闭(&L)" #: kdevdesigner/designer/mainwindowactions.cpp:920 msgid "Closes all form windows" msgstr "关闭全部表单窗口" #: kdevdesigner/designer/mainwindowactions.cpp:924 msgid "Next" msgstr "下一个" #: kdevdesigner/designer/mainwindowactions.cpp:924 msgid "Ne&xt" msgstr "下一个(&X)" #: kdevdesigner/designer/mainwindowactions.cpp:925 msgid "Activates the next window" msgstr "激活一个窗口" #: kdevdesigner/designer/mainwindowactions.cpp:929 msgid "Previous" msgstr "上一个" #: kdevdesigner/designer/mainwindowactions.cpp:929 msgid "Pre&vious" msgstr "上一个(&V)" #: kdevdesigner/designer/mainwindowactions.cpp:930 msgid "Activates the previous window" msgstr "激活上一个窗口" #: kdevdesigner/designer/kdevdesigner_part.rc:64 #: kdevdesigner/designer/kdevdesigner_part_sh.rc:72 #: kdevdesigner/designer/mainwindowactions.cpp:937 src/kdevassistantui.rc:106 #: src/simplemainwindow.cpp:714 src/tdevelopui.rc:118 #, no-c-format msgid "&Window" msgstr "窗口(&W)" #: kdevdesigner/designer/mainwindowactions.cpp:953 msgid "Vie&ws" msgstr "视图(&W)" #: kdevdesigner/designer/mainwindowactions.cpp:954 msgid "Tool&bars" msgstr "工具栏(&B)" #: kdevdesigner/designer/mainwindowactions.cpp:983 msgid "Opens the online help" msgstr "打开在线帮助" #: kdevdesigner/designer/mainwindowactions.cpp:987 #: parts/documentation/find_documentation.cpp:178 #: parts/documentation/find_documentation_options.cpp:163 msgid "Manual" msgstr "手册" #: kdevdesigner/designer/mainwindowactions.cpp:987 msgid "&Manual" msgstr "手册(&M)" #: kdevdesigner/designer/mainwindowactions.cpp:988 #, fuzzy msgid "Opens the TQt Designer manual" msgstr "打开 Qt 设计师手册" #: kdevdesigner/designer/mainwindowactions.cpp:993 #, fuzzy msgid "Displays information about TQt Designer" msgstr "显示关于 Qt 设计师的信息" #: kdevdesigner/designer/mainwindowactions.cpp:997 #, fuzzy msgid "About TQt" msgstr "关于 Qt" #: kdevdesigner/designer/mainwindowactions.cpp:997 #, fuzzy msgid "About &TQt" msgstr "关于 &Qt" #: kdevdesigner/designer/mainwindowactions.cpp:998 #, fuzzy msgid "Displays information about the TQt Toolkit" msgstr "显示关于 Qt 工具箱的信息" #: kdevdesigner/designer/mainwindowactions.cpp:1004 #, fuzzy msgid "Register TQt" msgstr "注册 Qt" #: kdevdesigner/designer/mainwindowactions.cpp:1004 #, fuzzy msgid "&Register TQt..." msgstr "注册 Qt(&R)..." #: kdevdesigner/designer/mainwindowactions.cpp:1005 msgid "Opens a web browser at the evaluation form on www.trolltech.com" msgstr "打开 Web 浏览器,查阅 www.trolltech.com 上的试用表单" #: kdevdesigner/designer/mainwindowactions.cpp:1006 msgid "Register with Trolltech" msgstr "向 Trolltech 注册" #: kdevdesigner/designer/mainwindowactions.cpp:1010 #: kdevdesigner/designer/mainwindowactions.cpp:1011 msgid "What's This?" msgstr "这是什么?" #: kdevdesigner/designer/mainwindowactions.cpp:1012 msgid "\"What's This?\" context sensitive help" msgstr "“这是什么?”联机帮助" #: kdevdesigner/designer/mainwindowactions.cpp:1041 msgid "Create a new project, form or source file..." msgstr "创建新工程、表单或源文件..." #: kdevdesigner/designer/mainwindowactions.cpp:1075 msgid "Name of File" msgstr "文件名" #: kdevdesigner/designer/mainwindowactions.cpp:1075 msgid "Enter the name of the new source file:" msgstr "输入新源文件的名称:" #: kdevdesigner/designer/mainwindowactions.cpp:1169 msgid "Selected project '%1'" msgstr "选中的工程“%1”" #: kdevdesigner/designer/mainwindowactions.cpp:1199 msgid "Open a file..." msgstr "打开文件..." #: kdevdesigner/designer/mainwindowactions.cpp:1211 msgid "*.ui *.pro|Designer Files" msgstr "*.ui *.pro|设计师文件" #: kdevdesigner/designer/mainwindowactions.cpp:1214 #, fuzzy msgid "*.pro|TQMAKE Project Files" msgstr "*.pro|QMAKE 工程文件" #: kdevdesigner/designer/mainwindowactions.cpp:1275 msgid "No import filter is available to import '%1'" msgstr "没有可导入“%1”的导入过滤器" #: kdevdesigner/designer/mainwindowactions.cpp:1279 msgid "Importing '%1' using import filter ..." msgstr "正在使用导入过滤器导入“%1”..." #: kdevdesigner/designer/mainwindowactions.cpp:1283 msgid "Nothing to load in '%1'" msgstr "“%1”中未装入任何内容" #: kdevdesigner/designer/mainwindowactions.cpp:1322 msgid "Reading file '%1'..." msgstr "正在读取文件“%1”..." #: kdevdesigner/designer/mainwindowactions.cpp:1341 msgid "Loaded file '%1'" msgstr "已装入文件“%1”" #: kdevdesigner/designer/mainwindowactions.cpp:1343 msgid "Failed to load file '%1'" msgstr "装入文件“%1”失败" #: kdevdesigner/designer/mainwindowactions.cpp:1344 msgid "Load File" msgstr "装入文件" #: kdevdesigner/designer/mainwindowactions.cpp:1344 msgid "Could not load file '%1'." msgstr "无法装入文件“%1”。" #: kdevdesigner/designer/mainwindowactions.cpp:1392 msgid "Project '%1' saved." msgstr "工程“%1”已保存。" #: kdevdesigner/designer/mainwindowactions.cpp:1398 msgid "Enter a filename..." msgstr "输入文件名..." #: kdevdesigner/designer/mainwindowactions.cpp:1439 #: kdevdesigner/designer/mainwindowactions.cpp:1494 msgid "NewTemplate" msgstr "新模板" #: kdevdesigner/designer/mainwindowactions.cpp:1451 #: kdevdesigner/designer/mainwindowactions.cpp:1472 msgid "Could not create the template." msgstr "无法创建模板。" #: kdevdesigner/designer/mainwindowactions.cpp:1568 msgid "Paste Error" msgstr "粘贴错误" #: kdevdesigner/designer/mainwindowactions.cpp:1569 msgid "" "Cannot paste widgets. Designer could not find a container\n" "to paste into which does not contain a layout. Break the layout\n" "of the container you want to paste into and select this container\n" "and then paste again." msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:1730 msgid "Edit the current form's slots..." msgstr "" #: kdevdesigner/designer/mainwindowactions.cpp:1741 msgid "Edit the current form's connections..." msgstr "编辑当前表单的连接..." #: kdevdesigner/designer/mainwindowactions.cpp:1841 msgid "Edit the current form's settings..." msgstr "编辑当前表单的设置..." #: kdevdesigner/designer/mainwindowactions.cpp:1870 msgid "Edit preferences..." msgstr "编辑首选项..." #: kdevdesigner/designer/mainwindowactions.cpp:2038 msgid "Edit custom widgets..." msgstr "编辑自定义部件..." #: kdevdesigner/designer/menubareditor.cpp:157 msgid "new menu" msgstr "新建菜单" #: kdevdesigner/designer/menubareditor.cpp:158 #: kdevdesigner/designer/popupmenueditor.cpp:304 msgid "new separator" msgstr "新建分隔符" #: kdevdesigner/designer/menubareditor.cpp:190 #: kdevdesigner/designer/menubareditor.cpp:194 #: kdevdesigner/designer/menubareditor.cpp:1012 msgid "Add Menu" msgstr "添加菜单" #: kdevdesigner/designer/menubareditor.cpp:242 msgid "separator" msgstr "分隔符" #: kdevdesigner/designer/menubareditor.cpp:381 msgid "Cut Menu" msgstr "剪切菜单" #: kdevdesigner/designer/menubareditor.cpp:404 msgid "Paste Menu" msgstr "粘贴菜单" #: kdevdesigner/designer/menubareditor.cpp:496 msgid "Delete Menu" msgstr "删除菜单" #: kdevdesigner/designer/menubareditor.cpp:1009 msgid "Item Dragged" msgstr "" #: kdevdesigner/designer/menubareditor.cpp:1048 msgid "Move Menu Left" msgstr "菜单左移" #: kdevdesigner/designer/menubareditor.cpp:1070 msgid "Move Menu Right" msgstr "菜单右移" #: kdevdesigner/designer/menubareditor.cpp:1101 #: kdevdesigner/designer/menubareditor.cpp:1106 msgid "Rename Menu" msgstr "重命名菜单" #: kdevdesigner/designer/multilineeditorimpl.cpp:99 msgid "&Styles" msgstr "样式(&S)" #: buildtools/qmake/projectconfigurationdlgbase.ui:90 #: kdevdesigner/designer/multilineeditorimpl.cpp:101 #, no-c-format msgid "Basics" msgstr "基本" #: kdevdesigner/designer/multilineeditorimpl.cpp:109 #: kdevdesigner/designer/propertyeditor.cpp:1883 #: kdevdesigner/designer/propertyeditor.cpp:1903 #: kdevdesigner/designer/propertyeditor.cpp:1967 msgid "Bold" msgstr "粗体" #: kdevdesigner/designer/multilineeditorimpl.cpp:115 #: kdevdesigner/designer/propertyeditor.cpp:1887 #: kdevdesigner/designer/propertyeditor.cpp:1907 #: kdevdesigner/designer/propertyeditor.cpp:1971 msgid "Underline" msgstr "下划线" #: kdevdesigner/designer/multilineeditorimpl.cpp:121 msgid "Typewriter" msgstr "" #: kdevdesigner/designer/multilineeditorimpl.cpp:134 #, fuzzy msgid "Break" msgstr "断开(&B)" #: kdevdesigner/designer/multilineeditorimpl.cpp:139 msgid "Paragraph" msgstr "段落" #: kdevdesigner/designer/multilineeditorimpl.cpp:147 msgid "Align left" msgstr "左对齐" #: kdevdesigner/designer/multilineeditorimpl.cpp:153 msgid "Align center" msgstr "居中对齐" #: kdevdesigner/designer/multilineeditorimpl.cpp:159 msgid "Align right" msgstr "右对齐" #: kdevdesigner/designer/multilineeditorimpl.cpp:165 msgid "Blockquote" msgstr "" #: kdevdesigner/designer/multilineeditorimpl.cpp:173 msgid "&Font" msgstr "字体(&F)" #: kdevdesigner/designer/multilineeditorimpl.cpp:185 msgid "Fontsize +1" msgstr "" #: kdevdesigner/designer/multilineeditorimpl.cpp:190 msgid "Fontsize -1" msgstr "" #: kdevdesigner/designer/multilineeditorimpl.cpp:195 #, fuzzy msgid "Headline 1" msgstr "头文件" #: kdevdesigner/designer/multilineeditorimpl.cpp:200 #, fuzzy msgid "Headline 2" msgstr "头文件" #: kdevdesigner/designer/multilineeditorimpl.cpp:205 #, fuzzy msgid "Headline 3" msgstr "头文件" #: kdevdesigner/designer/multilineeditorimpl.cpp:211 msgid "O&ptions" msgstr "选项(&P)" #: kdevdesigner/designer/multilineeditorimpl.cpp:217 msgid "Word Wrapping" msgstr "文本换行" #: kdevdesigner/designer/multilineeditorimpl.cpp:279 msgid "Set the Text of '%1'" msgstr "设定“%1”的文本" #: kdevdesigner/designer/multilineeditorimpl.cpp:285 msgid "Set 'wordWrap' of '%2'" msgstr "设定 %2 的“wordWrap”" #: kdevdesigner/designer/newformimpl.cpp:160 msgid "Load Template" msgstr "装入模板" #: kdevdesigner/designer/newformimpl.cpp:161 msgid "Could not load form description from template '%1'" msgstr "" #: kdevdesigner/designer/newformimpl.cpp:252 msgid "%1 Project" msgstr "%1 工程" #: kdevdesigner/designer/newformimpl.cpp:260 msgid "Dialog" msgstr "对话框" #: kdevdesigner/designer/newformimpl.cpp:267 msgid "Wizard" msgstr "向导" #: kdevdesigner/designer/newformimpl.cpp:272 msgid "Widget" msgstr "部件" #: kdevdesigner/designer/newformimpl.cpp:277 msgid "Main Window" msgstr "主窗口" #: kdevdesigner/designer/outputwindow.cpp:80 msgid "Warnings/Errors" msgstr "警告/错误" #: kdevdesigner/designer/customwidgeteditor.ui:1046 #: kdevdesigner/designer/editfunctions.ui:106 #: kdevdesigner/designer/outputwindow.cpp:83 #: languages/cpp/addattributedialogbase.ui:50 #: languages/cpp/debugger/gdbbreakpointwidget.cpp:218 #: languages/cpp/subclassingdlgbase.ui:139 #: languages/kjssupport/subclassingdlgbase.ui:104 #: languages/ruby/debugger/rdbbreakpointwidget.cpp:230 #: parts/ctags2/ctags2_widgetbase.ui:39 #: parts/partexplorer/partexplorerform.cpp:117 #, no-c-format msgid "Type" msgstr "类型" #: kdevdesigner/designer/outputwindow.cpp:84 #: parts/valgrind/valgrind_widget.cpp:97 msgid "Message" msgstr "消息" #: kdevdesigner/designer/outputwindow.cpp:85 #: languages/ada/problemreporter.cpp:89 languages/cpp/problemreporter.cpp:223 #: languages/java/problemreporter.cpp:93 #: languages/pascal/problemreporter.cpp:83 languages/php/phperrorview.cpp:184 #: vcs/subversion/svn_blamewidget.cpp:35 msgid "Line" msgstr "行" #: kdevdesigner/designer/outputwindow.cpp:86 #: languages/cpp/debugger/gdbbreakpointwidget.cpp:220 #: languages/ruby/debugger/rdbbreakpointwidget.cpp:232 #: parts/fileview/filegroupswidget.cpp:312 msgid "Location" msgstr "位置" #: kdevdesigner/designer/pixmapcollectioneditor.ui.h:115 msgid "Choose Image" msgstr "选择图像" #: kdevdesigner/designer/popupmenueditor.cpp:303 msgid "new item" msgstr "新建项目" #: kdevdesigner/designer/popupmenueditor.cpp:438 msgid "Cut Item" msgstr "剪切项目" #: kdevdesigner/designer/popupmenueditor.cpp:466 msgid "Paste Item" msgstr "粘贴项目" #: kdevdesigner/designer/popupmenueditor.cpp:508 msgid "Set Icon" msgstr "设定图标" #: kdevdesigner/designer/popupmenueditor.cpp:631 msgid "Add Item" msgstr "添加项目" #: kdevdesigner/designer/popupmenueditor.cpp:641 msgid "Remove Item" msgstr "删除项目" #: kdevdesigner/designer/popupmenueditor.cpp:769 #: kdevdesigner/designer/popupmenueditor.cpp:1428 msgid "Rename Item" msgstr "重命名项目" #: kdevdesigner/designer/popupmenueditor.cpp:1233 msgid "Drop Item" msgstr "删除项目" #: kdevdesigner/designer/popupmenueditor.cpp:1287 msgid "Remove Icon" msgstr "删除图标" #: kdevdesigner/designer/popupmenueditor.cpp:1308 msgid "Move Item Up" msgstr "项目上移" #: kdevdesigner/designer/popupmenueditor.cpp:1332 msgid "Move Item Down" msgstr "项目下移" #: kdevdesigner/designer/project.cpp:149 msgid "" "Could not connect to the database.\n" "Press 'OK' to continue or 'Cancel' to specify different\n" "connection information.\n" msgstr "" #: kdevdesigner/designer/projectsettingsimpl.cpp:96 msgid "" "*.db|Database Files\n" "*|All Files" msgstr "" "*.db|数据库文件\n" "*|全部文件" #: kdevdesigner/designer/projectsettingsimpl.cpp:104 msgid "" "*.pro|Project Files\n" "*|All Files" msgstr "" "*.pro|工程文件\n" "*|全部文件" #: kdevdesigner/designer/propertyeditor.cpp:422 msgid "Reset the property to its default value" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:423 msgid "Click this button to reset the property to its default value" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:1090 #: kdevdesigner/designer/propertyeditor.cpp:1151 msgid "False" msgstr "假" #: kdevdesigner/designer/propertyeditor.cpp:1091 #: kdevdesigner/designer/propertyeditor.cpp:1149 msgid "True" msgstr "真" #: kdevdesigner/designer/propertyeditor.cpp:1278 #: kdevdesigner/designer/richtextfontdialog.ui:73 #, no-c-format msgid "default" msgstr "默认" #: kdevdesigner/designer/propertyeditor.cpp:1505 #: kdevdesigner/designer/propertyeditor.cpp:1523 #: kdevdesigner/designer/propertyeditor.cpp:1602 #: kdevdesigner/designer/propertyeditor.cpp:1613 #: lib/widgets/propeditor/propertymachinefactory.cpp:131 #: lib/widgets/propeditor/propertymachinefactory.cpp:138 msgid "x" msgstr "x" #: kdevdesigner/designer/propertyeditor.cpp:1507 #: kdevdesigner/designer/propertyeditor.cpp:1528 #: kdevdesigner/designer/propertyeditor.cpp:1604 #: kdevdesigner/designer/propertyeditor.cpp:1615 #: lib/widgets/propeditor/propertymachinefactory.cpp:132 #: lib/widgets/propeditor/propertymachinefactory.cpp:139 msgid "y" msgstr "y" #: kdevdesigner/designer/propertyeditor.cpp:1511 #: kdevdesigner/designer/propertyeditor.cpp:1533 #: kdevdesigner/designer/propertyeditor.cpp:1606 #: kdevdesigner/designer/propertyeditor.cpp:1620 msgid "width" msgstr "宽度" #: kdevdesigner/designer/propertyeditor.cpp:1513 #: kdevdesigner/designer/propertyeditor.cpp:1538 #: kdevdesigner/designer/propertyeditor.cpp:1608 #: kdevdesigner/designer/propertyeditor.cpp:1622 msgid "height" msgstr "高度" #: kdevdesigner/designer/propertyeditor.cpp:1757 #: kdevdesigner/designer/propertyeditor.cpp:1770 #: kdevdesigner/designer/propertyeditor.cpp:1820 msgid "Red" msgstr "红" #: kdevdesigner/designer/propertyeditor.cpp:1759 #: kdevdesigner/designer/propertyeditor.cpp:1772 #: kdevdesigner/designer/propertyeditor.cpp:1822 msgid "Green" msgstr "绿" #: kdevdesigner/designer/propertyeditor.cpp:1761 #: kdevdesigner/designer/propertyeditor.cpp:1774 #: kdevdesigner/designer/propertyeditor.cpp:1824 msgid "Blue" msgstr "蓝" #: kdevdesigner/designer/propertyeditor.cpp:1879 #: kdevdesigner/designer/propertyeditor.cpp:1898 #: kdevdesigner/designer/propertyeditor.cpp:1963 msgid "Family" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:1881 #: kdevdesigner/designer/propertyeditor.cpp:1901 #: kdevdesigner/designer/propertyeditor.cpp:1965 #, fuzzy msgid "Point Size" msgstr "端口" #: kdevdesigner/designer/propertyeditor.cpp:1889 #: kdevdesigner/designer/propertyeditor.cpp:1909 #: kdevdesigner/designer/propertyeditor.cpp:1973 msgid "Strikeout" msgstr "删除线" #: kdevdesigner/designer/propertyeditor.cpp:2006 #: kdevdesigner/designer/propertyeditor.cpp:2040 msgid "Table" msgstr "表" #: kdevdesigner/designer/propertyeditor.cpp:2009 #: kdevdesigner/designer/propertyeditor.cpp:2063 msgid "Field" msgstr "字段" #: kdevdesigner/designer/propertyeditor.cpp:2171 #: kdevdesigner/designer/propertyeditor.cpp:2189 #: kdevdesigner/designer/propertyeditor.cpp:2239 #: lib/widgets/propeditor/propertymachinefactory.cpp:156 #, fuzzy msgid "hSizeType" msgstr "文件类型" #: kdevdesigner/designer/propertyeditor.cpp:2174 #: kdevdesigner/designer/propertyeditor.cpp:2191 #: kdevdesigner/designer/propertyeditor.cpp:2241 #: lib/widgets/propeditor/propertymachinefactory.cpp:157 #, fuzzy msgid "vSizeType" msgstr "文件类型" #: kdevdesigner/designer/propertyeditor.cpp:2177 #: kdevdesigner/designer/propertyeditor.cpp:2193 #: kdevdesigner/designer/propertyeditor.cpp:2243 msgid "horizontalStretch" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:2179 #: kdevdesigner/designer/propertyeditor.cpp:2195 #: kdevdesigner/designer/propertyeditor.cpp:2245 msgid "verticalStretch" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:2226 msgid "%1/%2/%3/%4" msgstr "%1/%2/%3/%4" #: kdevdesigner/designer/propertyeditor.cpp:2380 #: lib/widgets/propeditor/propertymachinefactory.cpp:165 msgid "Arrow" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:2381 msgid "Up-Arrow" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:2382 #: lib/widgets/propeditor/propertymachinefactory.cpp:167 #, fuzzy msgid "Cross" msgstr "类" #: kdevdesigner/designer/propertyeditor.cpp:2383 #: lib/widgets/propeditor/propertymachinefactory.cpp:168 #, fuzzy msgid "Waiting" msgstr "正在创建" #: kdevdesigner/designer/propertyeditor.cpp:2384 #: lib/widgets/propeditor/propertymachinefactory.cpp:169 #, fuzzy msgid "iBeam" msgstr "文件名" #: kdevdesigner/designer/propertyeditor.cpp:2385 #: lib/widgets/propeditor/propertymachinefactory.cpp:170 #, fuzzy msgid "Size Vertical" msgstr "垂直平铺(&E)" #: kdevdesigner/designer/propertyeditor.cpp:2386 #: lib/widgets/propeditor/propertymachinefactory.cpp:171 #, fuzzy msgid "Size Horizontal" msgstr "水平展开(&H)" #: kdevdesigner/designer/propertyeditor.cpp:2387 #: lib/widgets/propeditor/propertymachinefactory.cpp:172 msgid "Size Slash" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:2388 #: lib/widgets/propeditor/propertymachinefactory.cpp:173 #, fuzzy msgid "Size Backslash" msgstr "结尾的反斜杠转义符错" #: kdevdesigner/designer/propertyeditor.cpp:2389 #: lib/widgets/propeditor/propertymachinefactory.cpp:174 #, fuzzy msgid "Size All" msgstr "全部保存(&A)" #: kdevdesigner/designer/propertyeditor.cpp:2392 #: lib/widgets/propeditor/propertymachinefactory.cpp:175 #, fuzzy msgid "Blank" msgstr "清理" #: kdevdesigner/designer/propertyeditor.cpp:2393 #: lib/widgets/propeditor/propertymachinefactory.cpp:176 #, fuzzy msgid "Split Vertical" msgstr "垂直拆分" #: kdevdesigner/designer/propertyeditor.cpp:2394 #: lib/widgets/propeditor/propertymachinefactory.cpp:177 #, fuzzy msgid "Split Horizontal" msgstr "水平拆分" #: kdevdesigner/designer/propertyeditor.cpp:2395 #: lib/widgets/propeditor/propertymachinefactory.cpp:178 #, fuzzy msgid "Pointing Hand" msgstr "待添加" #: kdevdesigner/designer/propertyeditor.cpp:2396 #: lib/widgets/propeditor/propertymachinefactory.cpp:179 msgid "Forbidden" msgstr "" #: buildtools/ant/antoptionswidget.ui:112 #: buildtools/autotools/addservicedlgbase.ui:351 #: kdevdesigner/designer/customwidgeteditor.ui:1035 #: kdevdesigner/designer/propertyeditor.cpp:2922 #: parts/partexplorer/partexplorerform.cpp:116 #, no-c-format msgid "Property" msgstr "属性" #: kdevdesigner/designer/propertyeditor.cpp:3489 #: kdevdesigner/designer/propertyeditor.cpp:3503 msgid "Set '%1' of '%2'" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:3631 msgid "Sort &Categorized" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:3632 msgid "Sort &Alphabetically" msgstr "按字母顺序排列(&A)" #: kdevdesigner/designer/propertyeditor.cpp:3772 msgid "Reset '%1' of '%2'" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:3879 msgid "" "

TQWidget::%1

There is no documentation available for this " "property.

" msgstr "" #: kdevdesigner/designer/propertyeditor.cpp:4031 #, fuzzy msgid "New Signal Handler" msgstr "信号" #: kdevdesigner/designer/propertyeditor.cpp:4032 #, fuzzy msgid "Delete Signal Handler" msgstr "信号" #: kdevdesigner/designer/propertyeditor.cpp:4053 msgid "Remove Connection" msgstr "删除连接" #: kdevdesigner/designer/propertyeditor.cpp:4145 #: kdevdesigner/designer/propertyeditor.cpp:4184 #: kdevdesigner/designer/propertyeditor.cpp:4310 msgid "Property Editor" msgstr "属性编辑器" #: kdevdesigner/designer/propertyeditor.cpp:4149 msgid "P&roperties" msgstr "属性(&R)" #: kdevdesigner/designer/propertyeditor.cpp:4151 #, fuzzy msgid "Signa&l Handlers" msgstr "特殊头文件(&H)" #: kdevdesigner/designer/propertyeditor.cpp:4193 msgid "Property Editor (%1)" msgstr "属性编辑器(%1)" #: kdevdesigner/designer/resource.cpp:1831 msgid "Loading File" msgstr "装入文件" #: kdevdesigner/designer/resource.cpp:1832 #, fuzzy msgid "" "Error loading %1.\n" "The widget %2 could not be created." msgstr "这个项目无法删除" #: kdevdesigner/designer/sizehandle.cpp:235 msgid "Resize" msgstr "更改大小" #: kdevdesigner/designer/sourcefile.cpp:222 msgid "Save Code" msgstr "保存代码" #: kdevdesigner/designer/sourcefile.cpp:281 msgid "" "The project already contains a source file with \n" "filename '%1'. Please choose a new filename." msgstr "" #: kdevdesigner/designer/startdialogimpl.cpp:169 msgid "Designer Files (*.ui *.pro)" msgstr "设计师文件(*.ui *.pro)" #: kdevdesigner/designer/startdialogimpl.cpp:171 msgid "QMAKE Project Files (*.pro)" msgstr "" #: kdevdesigner/designer/startdialogimpl.cpp:177 msgid "All Files (*)" msgstr "所有文件(*)" #: kdevdesigner/designer/tableeditorimpl.cpp:346 msgid "Edit the Rows and Columns of '%1' " msgstr "" #: kdevdesigner/designer/variabledialogimpl.cpp:104 msgid "" "One variable has been declared twice.\n" "Remove this variable?" msgstr "" #: kdevdesigner/designer/widgetfactory.cpp:277 #, fuzzy msgid "Move Tab Page" msgstr "删除目标" #: kdevdesigner/designer/listeditor.ui:56 #: kdevdesigner/designer/widgetfactory.cpp:775 #: languages/cpp/ccconfigwidgetbase.ui:379 #: vcs/subversion/svn_commitdlgbase.ui:25 #, no-c-format msgid "Column 1" msgstr "列 1" #: kdevdesigner/designer/widgetfactory.cpp:814 #, fuzzy msgid "Tab 1" msgstr "制表符宽度" #: kdevdesigner/designer/widgetfactory.cpp:817 #, fuzzy msgid "Tab 2" msgstr "制表符宽度" #: kdevdesigner/designer/widgetfactory.cpp:960 #, fuzzy msgid "Page 1" msgstr "目标:%1" #: kdevdesigner/designer/widgetfactory.cpp:963 #, fuzzy msgid "Page 2" msgstr "软件包" #: kdevdesigner/designer/wizardeditorimpl.cpp:83 msgid "Edit Wizard Pages" msgstr "编辑向导页面" #: kdevdesigner/designer/wizardeditorimpl.cpp:172 #: kdevdesigner/designer/wizardeditorimpl.cpp:192 msgid "Swap Pages %1 and %2 of %3" msgstr "" #: kdevdesigner/designer/wizardeditorimpl.cpp:251 msgid "Move Page %1 to %2 in %3" msgstr "" #: kdevdesigner/designer/workspace.cpp:598 msgid "&Open Source File" msgstr "打开源文件(&O)" #: kdevdesigner/designer/workspace.cpp:601 msgid "&Remove Source File From Project" msgstr "从工程中删除源文件(&R)" #: kdevdesigner/designer/workspace.cpp:604 msgid "&Open Form" msgstr "打开表单(&O)" #: kdevdesigner/designer/workspace.cpp:607 #: kdevdesigner/designer/workspace.cpp:617 msgid "&Remove Form From Project" msgstr "从工程中删除表单(&R)" #: kdevdesigner/designer/workspace.cpp:610 msgid "&Open Form Source" msgstr "打开表单源代码(&O)" #: kdevdesigner/designer/workspace.cpp:614 msgid "&Remove Source File From Form" msgstr "从表单中删除源文件(&R)" #: kdevdesigner/designer/workspace.cpp:623 msgid "&Open Source" msgstr "打开源文件(&O)" #: languages/ada/adasupportpart.cpp:62 languages/cpp/cppsupportpart.cpp:586 #: languages/java/javasupportpart.cpp:151 #: languages/kjssupport/kjssupport_part.cpp:94 #: languages/pascal/pascalsupport_part.cpp:72 #: languages/php/phpsupportpart.cpp:107 msgid "Problems" msgstr "问题" #: languages/ada/adasupportpart.cpp:62 languages/cpp/cppsupportpart.cpp:586 #: languages/java/javasupportpart.cpp:151 #: languages/kjssupport/kjssupport_part.cpp:94 msgid "Problem reporter" msgstr "问题报告者" #: languages/ada/adasupportpart.cpp:63 #: languages/pascal/pascalsupport_part.cpp:73 msgid "" "Problem reporter

This window shows various \"problems\" in your " "project. It displays errors reported by a language parser." msgstr "" "问题报告

这个窗口显示您项目中的多种\"问题\"。它显示语言预处理器报告" "的错误。" #: languages/ada/adasupportpart.cpp:128 languages/cpp/cppsupportpart.cpp:1465 #: languages/csharp/csharpsupportpart.cpp:264 #: languages/java/javasupportpart.cpp:492 #: languages/perl/perlsupportpart.cpp:264 languages/php/phpsupportpart.cpp:427 msgid "Updating..." msgstr "正在更新..." #: languages/ada/adasupportpart.cpp:155 languages/cpp/cppsupportpart.cpp:1620 #: languages/csharp/csharpsupportpart.cpp:293 #: languages/java/javasupportpart.cpp:591 #: languages/perl/perlsupportpart.cpp:293 languages/php/phpsupportpart.cpp:479 msgid "Done" msgstr "完成" #: languages/ada/problemreporter.cpp:84 msgid "" "Problem reporter

This window shows errors reported by a language " "parser." msgstr "问题报告

这个窗口显示语言预处理器报告的错误。" #: languages/ada/problemreporter.cpp:86 languages/cpp/problemreporter.cpp:109 #: languages/cpp/problemreporter.cpp:110 languages/java/problemreporter.cpp:91 #: languages/pascal/problemreporter.cpp:80 languages/php/phperrorview.cpp:101 #: languages/php/phperrorview.cpp:102 msgid "Level" msgstr "级别" #: languages/ada/problemreporter.cpp:87 languages/cpp/problemreporter.cpp:225 #: languages/java/problemreporter.cpp:95 #: languages/pascal/problemreporter.cpp:81 languages/php/phperrorview.cpp:186 msgid "Problem" msgstr "问题" #: languages/ada/problemreporter.cpp:256 msgid "Ada Parsing" msgstr "Ada 分析" #: languages/bash/bashsupport_part.cpp:46 #: languages/cpp/app_templates/kdevlang/kdevlang_part.cpp:31 #: languages/kjssupport/kjssupport_part.cpp:72 #: languages/php/phpsupportpart.cpp:91 languages/ruby/rubysupport_part.cpp:51 #: languages/sql/sqlsupport_part.cpp:43 msgid "&Run" msgstr "运行(&R)" #: languages/bash/bashsupport_part.cpp:47 #: languages/cpp/debugger/dbgtoolbar.cpp:301 #: languages/php/phpsupportpart.cpp:94 #: languages/ruby/debugger/dbgtoolbar.cpp:300 #: languages/ruby/rubyconfigwidgetbase.ui:181 #: languages/ruby/rubysupport_part.cpp:54 languages/sql/sqlsupport_part.cpp:44 #, no-c-format msgid "Run" msgstr "运行" #: languages/bash/bashsupport_part.cpp:48 #: languages/ruby/rubysupport_part.cpp:55 msgid "Run

Starts an application." msgstr "运行

运行一个应用程序。" #: buildtools/lib/widgets/environmentdisplaydialogbase.ui:36 #: kdevdesigner/designer/variabledialog.ui:56 #: languages/bash/bashsupport_part.cpp:283 #: languages/cpp/debugger/variablewidget.cpp:222 #: languages/kjssupport/kjssupport_part.cpp:384 #: languages/kjssupport/kjssupport_part.cpp:411 #: languages/ruby/debugger/variablewidget.cpp:145 #: parts/classview/classtreebase.cpp:69 #, no-c-format msgid "Variable" msgstr "变量" #: languages/cpp/app_templates/dcopservice/main.cpp:12 #: languages/cpp/app_templates/kdedcop/main.cpp:10 #: languages/cpp/app_templates/khello/main.cpp:10 #: languages/cpp/app_templates/khello2/main.cpp:10 #: languages/cpp/app_templates/kpartapp/main.cpp:9 msgid "A TDE KPart Application" msgstr "一个 TDE KPart 应用程序" #: languages/cpp/app_templates/dcopservice/main.cpp:24 msgid "TDE" msgstr "TDE" #: languages/cpp/app_templates/dcopservice/main.cpp:27 msgid "Developer" msgstr "开发者" #: languages/cpp/app_templates/kapp/app.cpp:102 msgid "Cus&tom Menuitem" msgstr "自定义菜单项(&T)" #: languages/cpp/app_templates/kapp/app.cpp:179 msgid "Open Location" msgstr "打开位置" #: languages/cpp/app_templates/kapp/appview.cpp:62 msgid "Could not find a suitable HTML component" msgstr "无法找到合适的 HTML 组件" #: languages/cpp/app_templates/kapp/main.cpp:11 #: languages/cpp/app_templates/kmake/app.cpp:8 #: languages/cpp/app_templates/kscons_kxt/main.cpp:10 #: languages/cpp/app_templates/kxt/main.cpp:10 #: languages/cpp/app_templates/tdeconfig35/main.cpp:10 msgid "A TDE Application" msgstr "一个 TDE 应用程序" #: languages/cpp/app_templates/kapp/main.cpp:17 #: languages/cpp/app_templates/kmake/app.cpp:14 #: languages/cpp/app_templates/kpartapp/main.cpp:15 #: languages/cpp/app_templates/kscons_kxt/main.cpp:16 #: languages/cpp/app_templates/kscons_tdemdi/main.cpp:18 #: languages/cpp/app_templates/kxt/main.cpp:16 #: languages/cpp/app_templates/tdeconfig35/main.cpp:16 msgid "Document to open" msgstr "要打开的文档" #: languages/cpp/app_templates/kapp/main.cpp:23 #: languages/cpp/app_templates/kateplugin2/plugin_app.h:51 #: languages/cpp/app_templates/kdedcop/main.cpp:22 #: languages/cpp/app_templates/kdevpart/globalconfigbase.ui:16 #: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:61 #: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:62 #: languages/cpp/app_templates/kdevpart/projectconfigbase.ui:16 #: languages/cpp/app_templates/kdevpart2/globalconfigbase.ui:16 #: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:61 #: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:62 #: languages/cpp/app_templates/kdevpart2/projectconfigbase.ui:16 #: languages/cpp/app_templates/khello/main.cpp:22 #: languages/cpp/app_templates/khello2/main.cpp:22 #: languages/cpp/app_templates/kmake/app.cpp:21 #: languages/cpp/app_templates/kofficepart/kopart_aboutdata.h:17 #: languages/cpp/app_templates/kpartapp/main.cpp:21 #: languages/cpp/app_templates/kscons_kxt/main.cpp:22 #: languages/cpp/app_templates/kscons_tdemdi/main.cpp:24 #: languages/cpp/app_templates/kxt/main.cpp:22 #: languages/cpp/app_templates/opieapp/examplebase.ui:20 #: languages/cpp/app_templates/qtopia4app/examplebase.ui:16 #: languages/cpp/app_templates/qtopiaapp/examplebase.ui:20 #: languages/cpp/app_templates/tdeconfig35/main.cpp:22 #: languages/cpp/app_templates/tdescreensaver/tdescreensaver.cpp:18 #, no-c-format msgid "%{APPNAME}" msgstr "%{APPNAME}" #: languages/cpp/app_templates/kapp/pref.cpp:11 msgid "%{APPNAME} Preferences" msgstr "%{APPNAME} 首选项" #: languages/cpp/app_templates/kapp/pref.cpp:18 msgid "First Page" msgstr "第一页" #: languages/cpp/app_templates/kapp/pref.cpp:18 msgid "Page One Options" msgstr "第一页选项" #: languages/cpp/app_templates/kapp/pref.cpp:21 msgid "Second Page" msgstr "第二页" #: languages/cpp/app_templates/kapp/pref.cpp:21 msgid "Page Two Options" msgstr "第二页选项" #: languages/cpp/app_templates/kapp/pref.cpp:31 #: languages/cpp/app_templates/kapp/pref.cpp:40 msgid "Add something here" msgstr "在此添加点东西" #: languages/cpp/app_templates/kateplugin/plugin_app.cpp:57 #: languages/cpp/app_templates/kateplugin2/plugin_app.cpp:61 msgid "Insert Hello World" msgstr "插入 Hello 示例" #: languages/cpp/app_templates/kateplugin2/plugin_app.h:52 msgid "Configure KatePlugin%{APPNAME}" msgstr "" #: languages/cpp/app_templates/kde4app/kapp4.cpp:56 #: languages/cpp/app_templates/kscons_kxt/app.cpp:79 #: languages/cpp/app_templates/kxt/app.cpp:74 #: languages/cpp/app_templates/tdeconfig35/app.cpp:56 msgid "Swi&tch Colors" msgstr "切换颜色(&T)" #: kdevdesigner/designer/preferences.ui:68 #: languages/cpp/app_templates/kde4app/kapp4.cpp:84 #: languages/cpp/app_templates/kscons_kxt/app.cpp:142 #: languages/cpp/app_templates/kscons_tdemdi/apptdemdi.cpp:322 #: languages/cpp/app_templates/kxt/app.cpp:137 #: languages/cpp/app_templates/tdeconfig35/app.cpp:77 #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:580 #: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:50 #: parts/appwizard/appwizarddlgbase.ui:23 src/kdevideextension.cpp:57 #: src/projectmanager.cpp:152 #, no-c-format msgid "General" msgstr "常规" #: languages/cpp/app_templates/kde4app/kapp4view.cpp:39 #: languages/cpp/app_templates/kscons_kxt/appview.cpp:37 #: languages/cpp/app_templates/kxt/appview.cpp:37 #: languages/cpp/app_templates/tdeconfig35/appview.cpp:37 msgid "Settings changed" msgstr "设置已更改" #: languages/cpp/app_templates/kde4app/main.cpp:10 #, fuzzy msgid "A KDE 4 Application" msgstr "一个 TDE 应用程序" #: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:41 #: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:41 msgid "WHAT DOES THIS PART DO?" msgstr "这个模块做些什么?" #: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:94 #: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:94 msgid "&Do Something..." msgstr "做点事(&D)..." #: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:96 #: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:96 msgid "Do something" msgstr "做点事" #: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:97 #: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:97 msgid "Do something

Describe here what does this action do." msgstr "" #: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:180 #: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:180 msgid "This action does nothing." msgstr "" #: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:180 #: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:180 msgid "%{APPNAME} Plugin" msgstr "%{APPNAME} 插件" #: languages/cpp/app_templates/kicker/applet.cpp:33 msgid "This is an about box" msgstr "这是关于对话框" #: languages/cpp/app_templates/kicker/applet.cpp:39 msgid "This is a help box" msgstr "这是帮助对话框" #: languages/cpp/app_templates/kicker/applet.cpp:45 msgid "This is a preferences box" msgstr "这是首选项对话框" #: languages/cpp/app_templates/kmake/mainviewimp.cpp:17 msgid "Hello there." msgstr "" #: languages/cpp/app_templates/kofficepart/kopart_aboutdata.h:12 msgid "%{APPNAME} KOffice Program" msgstr "%{APPNAME} KOffice 程序" #: languages/cpp/app_templates/kofficepart/main.cpp:17 msgid "File to open" msgstr "要打开的文件" #: languages/cpp/app_templates/kpartapp/app.cpp:55 #: languages/cpp/app_templates/kscons_tdemdi/apptdemdiView.cpp:46 #: languages/cpp/app_templates/kscons_tdemdi/apptdemdiView.cpp:53 msgid "Could not find our part." msgstr "无法找到需要的组件。" #: languages/cpp/app_templates/kpartapp/app_part.cpp:185 msgid "%{APPNAME}Part" msgstr "%{APPNAME}Part" #: languages/cpp/app_templates/kpartplugin/plugin_app.cpp:16 msgid "&Plugin Action" msgstr "插件动作(&P)" #: languages/cpp/app_templates/kpartplugin/plugin_app.cpp:32 msgid "Cannot Translate Source" msgstr "无法翻译源代码" #: languages/cpp/app_templates/kpartplugin/plugin_app.cpp:33 msgid "You cannot translate anything except web pages with this plugin." msgstr "用这个插件您不能翻译网页之外的其它东西。" #: languages/cpp/app_templates/kpartplugin/plugin_app.cpp:53 msgid "The URL you entered is not valid, please correct it and try again" msgstr "您输入的 URL 是无效的,请更正后重试" #: languages/cpp/app_templates/kscons_kxt/app.cpp:72 #: languages/cpp/app_templates/kscons_tdemdi/apptdemdi.cpp:130 msgid "This shows useful tips on the use of this application." msgstr "" #: languages/cpp/app_templates/kscons_kxt/appview.cpp:36 #: languages/cpp/app_templates/kxt/appview.cpp:36 #: languages/cpp/app_templates/tdeconfig35/appview.cpp:36 msgid "This project is %1 days old" msgstr "" #: languages/cpp/app_templates/kscons_tdemdi/app_part.cpp:56 msgid "%{APPNAMELC}Part" msgstr "%{APPNAMELC}Part" #: languages/cpp/app_templates/kscons_tdemdi/apptdemdi.cpp:84 msgid "Terminal" msgstr "终端" #: languages/cpp/app_templates/kscons_tdemdi/main.cpp:12 msgid "A simple tdemdi app" msgstr "" #: languages/cpp/app_templates/noatunui/plugin_impl.cpp:50 msgid "Play" msgstr "播放" #: languages/cpp/app_templates/noatunui/plugin_impl.cpp:56 #: lib/widgets/kdevhtmlpart.cpp:64 lib/widgets/kdevhtmlpart.cpp:68 #: src/partcontroller.cpp:171 src/partcontroller.cpp:173 msgid "Forward" msgstr "向前" #: languages/cpp/app_templates/noatunui/plugin_impl.cpp:63 msgid "Playlist" msgstr "播放列表" #: languages/cpp/app_templates/noatunui/plugin_impl.cpp:69 msgid "Change loop style" msgstr "改变循环类型" #: languages/cpp/app_templates/noatunui/plugin_impl.cpp:98 #: languages/cpp/app_templates/noatunui/plugin_impl.cpp:206 msgid "No File Loaded" msgstr "未载入文件" #: languages/cpp/app_templates/noatunui/plugin_impl.cpp:251 msgid "No looping" msgstr "没有循环" #: languages/cpp/app_templates/noatunui/plugin_impl.cpp:255 msgid "Song looping" msgstr "歌曲循环" #: languages/cpp/app_templates/noatunui/plugin_impl.cpp:259 msgid "Playlist looping" msgstr "播放列表循环" #: languages/cpp/app_templates/noatunui/plugin_impl.cpp:263 msgid "Random play" msgstr "随即播放" #: languages/cpp/app_templates/tdecmodule/module.cpp:62 msgid "Helpful information about the %{APPNAMELC} module." msgstr "关于 %{APPNAMELC} 模块的帮助信息。" #: languages/cpp/app_templates/tdefileplugin/tdefile_plugin.cpp:26 msgid "%{APPNAME} Information" msgstr "%{APPNAME} 信息" #: languages/cpp/app_templates/tdefileplugin/tdefile_plugin.cpp:31 msgid "Items" msgstr "项目" #: kdevdesigner/designer/customwidgeteditor.ui:999 #: languages/cpp/app_templates/tdefileplugin/tdefile_plugin.cpp:32 #, no-c-format msgid "Size" msgstr "大小" #: languages/cpp/app_templates/tdeioslave/slave.cpp:51 #: vcs/subversion/svn_tdeio.cpp:300 msgid "Looking for %1..." msgstr "正在查找 %1..." #: languages/cpp/ccconfigwidget.cpp:233 #, fuzzy msgid "Are you sure you want to delete the \"%1\" database?" msgstr "您确定想要删除“%1”数据库吗?" #: languages/cpp/ccconfigwidget.cpp:238 #, fuzzy msgid "Delete Database" msgstr "删除数据库" #: languages/cpp/ccconfigwidget.cpp:574 #, fuzzy msgid "Edit TQt4 Designer Plugin Paths" msgstr "禁用插件" #: languages/cpp/ccconfigwidget.cpp:577 #, fuzzy msgid "Plugin Paths" msgstr "插件路径(&G)" #: languages/cpp/app_templates/kmake/mainview.ui:32 #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:108 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:32 #, no-c-format msgid "Output" msgstr "输出" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:110 msgid "Only check the code for syntax errors, do not produce object code" msgstr "只检查源代码里的语法错误,不产生目标代码" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:112 msgid "Generate extra code to write profile information for gprof" msgstr "为 gprof 生成输出剖析信息的额外代码" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:114 msgid "Do not delete intermediate output like assembler files" msgstr "不删除输出的中间文件,比如汇编代码文件" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:119 #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:288 #: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:59 #: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:60 msgid "Code Generation" msgstr "代码生成" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:123 msgid "Enable exception handling" msgstr "启用异常处理" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:129 msgid "Disable exception handling" msgstr "关闭异常处理" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:136 msgid "" "Return certain struct and union values in memory rather than in registers" msgstr "用内存而不是寄存器返回某些结构和联合" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:138 msgid "Return certain struct and union values in registers when possible" msgstr "尽可能用寄存器返回某些结构和联合" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:140 msgid "For an enum, choose the smallest possible integer type" msgstr "为枚举选用最小的可用整数类型" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:142 msgid "Make 'double' the same as 'float'" msgstr "“double”双精度浮点数当作“float”浮点数处理" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:173 #: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:121 msgid "Optimization Level" msgstr "优化级别" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:176 #: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:124 msgid "No optimization" msgstr "无优化" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:177 #: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:125 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:377 msgid "Level 1" msgstr "级别 1" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:178 #: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:126 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:379 msgid "Level 2" msgstr "级别 2" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:183 msgid "Do not store floating point variables in registers" msgstr "不在寄存器里保存浮点数变量" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:186 msgid "" "Pop the arguments to each function call directly after the function " "returns" msgstr "函数返回时直接弹出传给函数的参数" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:190 msgid "" "Force memory operands to be copied into registers before doing " "arithmetic on them" msgstr "在进行算术运算前强制将内存操作数复制到寄存器" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:194 msgid "" "Force memory address constants to be copied into registers before doing " "arithmetic on them" msgstr "在进行算术运算前强制将内存地址常量复制到寄存器" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:198 msgid "" "Do not keep the frame pointer in a register for functions that do not " "need one" msgstr "如果函数不需要堆栈框架寄存器,则不将它保存在寄存器中" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:202 msgid "Ignore the inline keyword" msgstr "忽略 inline 关键字" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:208 msgid "" "Do not make member functions inline merely because they are defined " "inside the class scope" msgstr "不因为成员函数是在类声明中定义就把它们当作内联函数" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:271 msgid "Dialect" msgstr "方言" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:273 msgid "Interpret source code as Fortran 90 free form" msgstr "按 Fortran 90 自由格式解释源代码" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:276 msgid "Allow certain Fortran 90 constructs" msgstr "允许某些 Fortran 90 构造" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:278 msgid "Allow '$' in symbol names" msgstr "在符号名中允许用“$”" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:280 msgid "Allow '' in character constants to escape special characters" msgstr "在字符常量中允许用 '' 标识特殊转义字符" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:283 msgid "DO loops are executed at least once" msgstr "DO 循环至少被执行一次" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:290 msgid "Treat local variables as if SAVE statement had been specified" msgstr "对局部变量如同指定了 SAVE 语句那样处理" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:292 msgid "Init local variables to zero" msgstr "局部变量初始化为 0" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:294 msgid "Generate run-time checks for array subscripts" msgstr "生成运行时数组下标检查代码" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:326 msgid "Inhibit all warnings" msgstr "禁止所有警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:328 msgid "Inhibit warnings about the use of #import" msgstr "禁止关于 #import 使用的警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:330 msgid "Make all warnings into errors" msgstr "所有的警告都当作是错误" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:332 msgid "Issue all warnings demanded by strict ANSI C or ISO C++" msgstr "按照严格的 ANSI C 或 ISO C++ 的要求给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:334 msgid "Like -pedantic, but errors are produced instead of warnings" msgstr "类似于 -pedantic,但是报告为错误而不是警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:336 msgid "All warnings below, combined (-Wall):" msgstr "所有如下的警告组合 (-Wall):" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:341 msgid "Warn if an array subscript has type char" msgstr "如果数组下标类型为 char 则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:343 msgid "Warn when a comment-start sequence /* appears inside a comment" msgstr "如果注释开始符号 /* 出现在另一注释里则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:345 msgid "" "Check calls to printf(), scanf() etc\n" "to make sure that the arguments supplied have types appropriate\n" "to the format string specified, and that the conversions specified\n" "in the format string make sense" msgstr "" "检查 printf()scanf() 等\n" "函数调用的参数,确保它们和格式字符串中的\n" "格式符匹配,并且格式字符串中指定的类型转换\n" "是合理的" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:350 msgid "" "Enable -Wformat plus format checks not \n" "included in -Wformat. Currently equivalent to \n" "`-Wformat -Wformat-nonliteral -Wformat-security \n" "-Wformat-y2k'." msgstr "" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:355 msgid "Warn when a declaration does not specify a type" msgstr "如果声明未指定类型则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:358 msgid "Issue a warning when a non-declared function is used" msgstr "如果使用了未声明的函数则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:361 msgid "Issue an error when a non-declared function is used" msgstr "如果使用了未声明的函数则报告错误" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:363 msgid "Warn if the type of main() is suspicious" msgstr "如果 main() 函数的返回类型不正确则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:365 msgid "Warn when multicharacter constants are encountered" msgstr "如果遇到多字符常量则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:367 msgid "" "Warn if an aggregate or union initializer is not fully bracketed" msgstr "如果聚合或者联合初始值未完全处于括号中则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:369 #, fuzzy msgid "Warn when parentheses are omitted in certain contexts" msgstr "在某些场合如果小括号被省略则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:371 msgid "" "Warn about code that may have undefined semantics because of\n" "violations of sequence point rules in the C standard" msgstr "" "对代码中出现的因违反标准 C 中的顺序规则而\n" "可能产生的未定义语法给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:374 msgid "Warn when a function without explicit return type is defined" msgstr "如果函数未定义明确的返回类型则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:376 msgid "" "Warn whenever a switch statement has an index of enumeral type\n" "and lacks a case for one or more of the named codes of that " "enumeration" msgstr "" "如果当 switch 语句的索引变量为枚举类型但\n" "缺少一个或多个该枚举常量的 case 语句则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:379 msgid "Warn when trigraphs are encountered" msgstr "遇到“??x”三字母转义字符串时给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:381 msgid "Warn when a variable is declared but not used" msgstr "已声明的变量未被使用则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:383 msgid "Warn when a variable is used without being initialized first" msgstr "未初始化的变量被使用则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:385 msgid "Warn when an unknown #pragma statement is encountered" msgstr "遇到未知的 #pragma 语句则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:387 #, fuzzy msgid "Warn when a division by zero occurs." msgstr "已声明的变量未被使用则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:391 msgid "" "Warn when the order of member initializers is different from\n" "the order in the class declaration" msgstr "成员初始化顺序和类声明时给出的顺序不同时给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:426 msgid "Set options not included in -Wall which are very specific" msgstr "指定在 -Wall 中未包括但比较特殊的选项" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:428 msgid "Warn if floating point values are used in equality comparisons" msgstr "如果相等比较中用到浮点值则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:430 msgid "" "Warn if an undefined identifier is evaluated in an #if directive" msgstr "如果 #if 指令中用到未定义的标识符则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:432 msgid "Warn whenever a local variable shadows another local variable" msgstr "如果一个局部变量掩盖了另一个局部变量则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:434 msgid "" "Warn about anything that depends on the sizeof a\n" "function type or of void" msgstr "" "对任何依赖于函数类型或者 void 类型的 sizeof\n" "操作给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:437 msgid "" "Warn whenever a pointer is cast so as to remove a type\n" "qualifier from the target type" msgstr "如果指针在强制转换时丢失了类型修饰符则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:440 msgid "" "Warn whenever a pointer is cast such that the required\n" "alignment of the target is increased" msgstr "指针类型强制转换时需要增加目标的对齐宽度则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:443 msgid "" "Warn when the address of a string constant is cast\n" "into a non-const char * pointer" msgstr "" "当字符串常量的地址被强制转换为非常量的 char * \n" "指针时给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:446 msgid "" "Warn if a prototype causes a type conversion that is different\n" "from what would happen to the same argument in the absence\n" "of a prototype" msgstr "" "如果函数原型会导致某些参数的类型转换和没有原型时\n" "不相同则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:450 msgid "" "Warn when a comparison between signed and unsigned values\n" "could produce an incorrect result when the signed value\n" "is converted to unsigned" msgstr "" "带符号数和无符号数相比较,在带符号数转换成一个\n" "无符号数时如果会产生一个错误结果,则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:454 msgid "" "Warn about functions which might be candidates for attribute 'noreturn'" msgstr "对有可能需要“noreturn”属性的函数给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:456 msgid "" "Warn if any functions that return structures or unions are\n" "defined or called" msgstr "如果定义或调用了返回结构或联合的函数则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:459 msgid "" "Warn if a global function is defined without a previous declaration" msgstr "如果全局函数定义时没有预先声明则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:462 msgid "" "Do not warn about uses of functions, variables, and types marked as\n" "deprecated by using the 'deprecated' attribute" msgstr "" "不对使用由“deprecated”属性标记的过时函数、变量和\n" "类型给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:465 msgid "" "Warn if a structure is given the packed attribute, but the packed\n" "attribute has no effect on the layout or size of the structure" msgstr "" "如果一个结构具有 packed 属性,但 packed 属性对\n" "结构的布局或者大小没有影响则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:468 msgid "" "Warn if padding is included in a structure, either to align an\n" "element of the structure or to align the whole structure" msgstr "" "如果结构中由于元素对齐或者整个结构对齐需要进行\n" "填充则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:471 msgid "Warn if anything is declared more than once in the same scope" msgstr "如果在同一范围中某声明出现一次以上则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:473 msgid "Warn if the compiler detects that code will never be executed" msgstr "如果编译器检测到有代码将不会被执行则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:475 #, fuzzy msgid "Warn if an inline function cannot be inlined" msgstr "如果一个 inline 函数无法被作为内联处理则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:477 msgid "Warn if the long long type is used" msgstr "如果使用了 long long 类型则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:479 msgid "Warn if a requested optimization pass is disabled" msgstr "如果所要求的优化工序被禁用则给出警告。" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:481 #, fuzzy msgid "Do not warn if there is a division by zero" msgstr "已声明的变量未被使用则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:486 msgid "" "Warn about certain constructs that behave differently\n" "in traditional and ANSI C" msgstr "" "如果某种构造在传统 C 和 ANSI C 中表现不同\n" "则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:489 msgid "Warn whenever a function call is cast to a non-matching type" msgstr "当函数调用被强制转换成不匹配的类型时给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:491 msgid "" "Warn if a function is declared or defined without specifying\n" "the argument types" msgstr "如果函数声明或者定义时未指定参数类型则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:494 msgid "" "Warn if a global function is defined without a previous prototype " "declaration" msgstr "如果全局函数定义时没有预先声明原型则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:496 msgid "" "Warn if an extern declaration is encountered within a function" msgstr "如果在函数内部出现 extern 声明则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:503 msgid "" "Warn when a function declaration hides virtual\n" "functions from a base class" msgstr "当一个函数声明会掩盖基类的虚拟函数时给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:506 msgid "" "Warn when g++'s synthesis behavior does\n" "not match that of cfront" msgstr "" "如果 g++ 的综合行为与 cfront 不匹配\n" "则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:509 msgid "" "Warn when a class seems unusable, because all the constructors or\n" "destructors in a class are private and the class has no friends or\n" "public static member functions" msgstr "" "如果一个类的构造和析构函数都是私有的,而且没有友元\n" "或者公开的静态成员函数,因此实际上是无法使用时给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:513 msgid "" "Warn when a class declares a non-virtual destructor that should\n" "probably be virtual, because it looks like the class will be used\n" "polymorphically" msgstr "" "当一个类声明了非虚拟的析构函数,但该类可能被多态使用,应该需要虚拟析构函" "数时给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:517 msgid "" "Warn when overload resolution chooses a promotion from unsigned or\n" "enumeral type to a signed type over a conversion to an unsigned\n" "type of the same size. Previous versions of G++ would try to\n" "preserve unsignedness, but the standard mandates the current behavior" msgstr "" "如果重载决定选择将无符号或枚举类型提升为有符号的\n" "类型,而不是转换会同样大小的无符号类型,则给出警告。\n" "以前的 G++ 版本会试图保留为无符号类型,但按照标准要求\n" "使用目前的做法" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:522 msgid "" "Warn when G++ generates code that is probably not compatible with\n" "the vendor-neutral C++ ABI" msgstr "" "如果 C++ 生成的代码有可能和独立于制造商的 C++ ABI \n" "不兼容则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:528 #, fuzzy msgid "" "Warn about violations of the following style guidelines from Scott\n" "Meyers' 'Effective C++' book:\n" "* Item 11: Define a copy constructor and an assignment\n" " operator for classes with dynamically allocated memory;\n" "* Item 12: Prefer initialization to assignment in constructors;\n" "* Item 14: Make destructors virtual in base classes;\n" "* Item 15: Have `operator=' return a reference to `*this';\n" "* Item 23: Do not try to return a reference when you must\n" " return an object\n" "\n" "and about violations of the following style guidelines from Scott\n" "Meyers' 'More Effective C++' book:\n" "* Item 6: Distinguish between prefix and postfix forms of\n" " increment and decrement operators;\n" "* Item 7: Never overload '&&', '||', or ','" msgstr "" "如果违反 Scott Meyers 的《Effective C++》一书中\n" "给出的下列指导则给出警告:\n" "* 第11条:对使用动态内存分配的类定义拷贝构造函数和赋\n" "值操作符;* 第12条:在构造函数中优先使用初始化而不是赋值;\n" "* 第14条:基类的析构函数定义为虚拟函数;\n" "* 第15条:让“operator=”操作符函数返回“*this”\n" "的引用;\n" "* 第23条:当必须返回一个对象时不要试图返回引用\n" "\n" "并且如果违反 Scott Meyers 的《More Effective C++》一书\n" "中给出的下列指导则给出警告:\n" "* 第6条:区别递增和递减操作符的前缀和后缀使用方式;\n" "* 第7条:永远不要重载“&&”“||”或“,”" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:544 msgid "Do not warn about usage of deprecated features" msgstr "不对使用过时特性给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:546 msgid "" "Disable warnings when non-templatized friend functions are declared\n" "within a template" msgstr "在模板内声明未模板化的友元函数时不给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:549 msgid "" "Warn if an old-style (C-style) cast to a non-void type is used\n" "within a C++ program" msgstr "" "如果在 C++ 程序中使用了旧式(C 风格)的非空类型\n" "转换则给出警告" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:552 msgid "" "Disable the diagnostic for converting a bound pointer to member\n" "function to a plain pointer" msgstr "禁止对转换成员函数的边界指针为普通指针的诊断" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:583 #: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:251 #: languages/pascal/compiler/dccoptions/optiontabs.cpp:318 msgid "Optimization" msgstr "优化" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:588 msgid "Fortran Specifics" msgstr "Fortran 特定的" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:594 msgid "Warnings (safe)" msgstr "警告 (安全的)" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:597 msgid "Warnings (unsafe)" msgstr "警告 (不安全的)" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:680 msgid "GNU C Compiler Options" msgstr "GNU C 编译器选项" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:682 msgid "GNU C++ Compiler Options" msgstr "GNU C++ 编译器选项" #: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:684 msgid "GNU Fortran 77 Compiler Options" msgstr "GNU Fortran 77 编译器选项" #: languages/cpp/configproblemreporter.ui.h:95 #: languages/java/configproblemreporter.ui.h:49 msgid "delay: %1 msec" msgstr "" #: languages/cpp/cppcodecompletion.cpp:360 #, fuzzy msgid "Jump to %1 %2" msgstr "%1 的类型是 %2" #: languages/cpp/cppcodecompletion.cpp:438 msgid "Jump to declaration of %1(...)" msgstr "" #: languages/cpp/cppcodecompletion.cpp:439 msgid "Jump to definition of %1(...)" msgstr "" #: languages/cpp/cppcodecompletion.cpp:441 #: languages/cpp/cppcodecompletion.cpp:1540 #: languages/cpp/cppcodecompletion.cpp:1572 #, fuzzy, c-format msgid "Jump to %1" msgstr "跳到光标位置" #: languages/cpp/cppcodecompletion.cpp:445 #: languages/cpp/cppcodecompletion.cpp:594 msgid " is unresolved" msgstr "" #: languages/cpp/cppcodecompletion.cpp:447 #: languages/cpp/cppcodecompletion.cpp:596 msgid " (builtin " msgstr "" #: languages/cpp/cppcodecompletion.cpp:540 #, fuzzy msgid "Show %1 %2" msgstr "显示 %1" #: languages/cpp/cppcodecompletion.cpp:587 #, c-format msgid "Show %1" msgstr "显示 %1" #: languages/cpp/cppcodecompletion.cpp:648 msgid "#include \"%1\" ( defines %2 )" msgstr "" #: languages/cpp/cppcodecompletion.cpp:683 #: languages/cpp/cppcodecompletion.cpp:796 #, fuzzy, c-format msgid "Comment on %1" msgstr "注释(&M):" #: languages/cpp/cppcodecompletion.cpp:699 msgid "Specialized from \"%1\"" msgstr "" #: languages/cpp/cppcodecompletion.cpp:708 #, fuzzy msgid "Template-param \"%1\"" msgstr "模板名称" #: languages/cpp/cppcodecompletion.cpp:720 #, fuzzy msgid "Return-type \"%1\"" msgstr "返回类型(&Y):" #: languages/cpp/cppcodecompletion.cpp:728 #, fuzzy msgid "Argument-types" msgstr "参数(&G)" #: languages/cpp/cppcodecompletion.cpp:738 #, fuzzy msgid "Argument \"%1\"" msgstr "参数(&G)" #: languages/cpp/cppcodecompletion.cpp:750 #, fuzzy msgid "Trace" msgstr "真" #: languages/cpp/cppcodecompletion.cpp:757 #, fuzzy msgid "%1 -> %2" msgstr "%2 中的 %1" #: languages/cpp/cppcodecompletion.cpp:764 #: vcs/subversion/svn_logviewwidget.cpp:54 #, fuzzy msgid "Comment" msgstr "注释(&M):" #: languages/cpp/cppcodecompletion.cpp:783 #, fuzzy msgid "Base-class \"%1\"" msgstr "基类:" #: languages/cpp/cppcodecompletion.cpp:789 msgid "Nested in \"%1\"" msgstr "" #: languages/cpp/cppcodecompletion.cpp:958 #, fuzzy msgid "Jump to declaration under cursor" msgstr "跳到光标位置" #: languages/cpp/cppcodecompletion.cpp:962 #, fuzzy msgid "Jump to definition under cursor" msgstr "跳到光标位置" #: languages/cpp/cppcodecompletion.cpp:1536 #: languages/cpp/cppcodecompletion.cpp:1538 msgid "Navigate by Macro \"%1\"" msgstr "" #: languages/cpp/cppcodecompletion.cpp:1542 #, fuzzy msgid "Body" msgstr "粗体" #: languages/cpp/cppcodecompletion.cpp:1568 #: languages/cpp/cppcodecompletion.cpp:1570 #, c-format msgid "Goto Include File: %1" msgstr "转到头文件:%1" #: languages/cpp/cppcodecompletion.cpp:1584 msgid "" "This include-file could not be located regularly, and was selected from the " "project file list." msgstr "" #: languages/cpp/cppcodecompletion.cpp:1589 #: languages/cpp/cppcodecompletion.cpp:1591 #, fuzzy msgid "Not Found: \"%1\"" msgstr "没有源文件:%1" #: languages/cpp/cppcodecompletion.cpp:1613 #: languages/cpp/cppcodecompletion.cpp:1615 msgid "Navigate by \"%1\"" msgstr "" #: languages/cpp/cppcodecompletion.cpp:1617 msgid "" "Navigation

Provides a menu to navigate to positions of items that " "are involved in this expression" msgstr "" #: languages/cpp/cppcodecompletion.cpp:1633 #: languages/cpp/cppcodecompletion.cpp:1635 msgid "Navigate Class-View by \"%1\"" msgstr "" #: languages/cpp/cppcodecompletion.cpp:1637 msgid "" "Navigation

Provides a menu to show involved items in the class-view " msgstr "" #: languages/cpp/cppcodecompletion.cpp:1707 #, fuzzy msgid "Type of \"%1\" is \"%2\"" msgstr "%1 的类型是 %2" #: languages/cpp/cppcodecompletion.cpp:1709 #, fuzzy msgid "Comment on variable \"%1\": \"%2\"" msgstr "注释(&M):" #: languages/cpp/cppcodecompletion.cpp:1712 #, fuzzy msgid "Comment on \"%1\": \"%2\"" msgstr "注释(&M):" #: languages/cpp/cppcodecompletion.cpp:1715 msgid "\"%1\" has no comment" msgstr "" #: languages/cpp/cppcodecompletion.cpp:1720 msgid "Type of \"%1\" is unresolved, name: \"%2\"" msgstr "" #: languages/cpp/cppcodecompletion.cpp:1722 msgid "\"%1\" is of builtin type \"%2\", a %3" msgstr "" #: languages/cpp/cppcodecompletion.cpp:1727 msgid "" "Type of \"%1\" could not be evaluated: tried to evaluate expression as \"%2\"" msgstr "" #: languages/cpp/cppcodecompletion.cpp:4265 #, fuzzy msgid "Type of \"%1\" is \"%2\", %3" msgstr "%1 的类型是 %2" #: languages/cpp/cppcodecompletion.cpp:4431 msgid " (resolved) " msgstr "" #: languages/cpp/cppcodecompletion.cpp:4439 #: languages/cpp/cppcodecompletion.cpp:4448 msgid " (unresolved) " msgstr "" #: languages/cpp/cppcodecompletion.cpp:4443 msgid " (builtin type) " msgstr "" #: languages/cpp/cppimplementationwidget.cpp:76 #: languages/cpp/cppnewclassdlg.cpp:1840 msgid "Cannot write to implementation file" msgstr "无法写入实现文件" #: languages/cpp/cppimplementationwidget.cpp:86 #: languages/cpp/cppnewclassdlg.cpp:2064 msgid "Cannot write to header file" msgstr "无法写入头文件" #: languages/cpp/cppnewclassdlg.cpp:81 msgid "Use as Private" msgstr "私有的" #: languages/cpp/cppnewclassdlg.cpp:83 msgid "Use as Protected" msgstr "受保护的" #: languages/cpp/cppnewclassdlg.cpp:85 msgid "Use as Public" msgstr "公有的" #: languages/cpp/cppnewclassdlg.cpp:88 msgid "Unset" msgstr "无设置" #: languages/cpp/cppnewclassdlg.cpp:92 msgid "Extend Base Class Functionality" msgstr "扩充基类功能" #: languages/cpp/cppnewclassdlg.cpp:94 msgid "Replace Base Class Method" msgstr "替换基类的方法" #: languages/cpp/cppnewclassdlg.cpp:346 msgid "" "Objective C does not support multiple inheritance.\n" "Only the first base class in the list will be taken into account." msgstr "" "Objective C不支持多重继承。\n" "只有列表中的第一个基类有效。" #: languages/cpp/cppnewclassdlg.cpp:386 #, fuzzy msgid "" "Multiple inheritance requires TQObject derivative to be first and unique in " "base class list." msgstr "多重继承需要QObject在基类列表中是第一个和唯一的。" #: languages/cpp/cppnewclassdlg.cpp:851 languages/cpp/cppnewclassdlg.cpp:854 #: languages/cpp/cppnewclassdlg.cpp:1010 languages/cpp/cppnewclassdlg.cpp:1013 #: languages/cpp/cppnewclassdlgbase.ui:803 #, no-c-format msgid "Methods" msgstr "方法" #: languages/cpp/cppnewclassdlg.cpp:852 languages/cpp/cppnewclassdlg.cpp:855 #: languages/cpp/cppnewclassdlg.cpp:1011 languages/cpp/cppnewclassdlg.cpp:1014 #, fuzzy msgid "Slots (TQt-specific)" msgstr "槽(Qt 特定的)" #: languages/cpp/cppnewclassdlg.cpp:856 languages/cpp/cppnewclassdlg.cpp:1015 msgid "Attributes" msgstr "特征" #: languages/cpp/cppnewclassdlg.cpp:958 languages/cpp/cppnewclassdlg.cpp:1214 msgid "replace" msgstr "替换" #: languages/cpp/cppnewclassdlg.cpp:958 languages/cpp/cppnewclassdlg.cpp:1208 #: languages/cpp/cppnewclassdlg.cpp:1529 msgid "extend" msgstr "扩展" #: languages/cpp/cppnewclassdlg.cpp:1327 msgid "You must enter a classname." msgstr "您必须输入类名。" #: languages/cpp/cppnewclassdlg.cpp:1334 msgid "You must enter a name for the header file." msgstr "您必须输入头文件的名字。" #: languages/cpp/cppnewclassdlg.cpp:1340 msgid "You must enter a name for the implementation file." msgstr "您必须输入实现文件的名字。" #: languages/cpp/cppnewclassdlg.cpp:1347 msgid "" "Generated files will always be added to the active directory, so you must " "not give an explicit subdirectory." msgstr "生成的文件将总会放到当前激活的目录里,因此您不能指定子目录。" #: languages/cpp/cppnewclassdlg.cpp:1374 #, fuzzy msgid "" "TDevelop is not able to add classes to existing header or implementation " "files." msgstr "KDevelop 还不能把类添加到已经存在的头文件或者实现文件中。" #: languages/cpp/cppsupportpart.cpp:254 msgid "Switch Header/Implementation" msgstr "切换到声明/实现" #: languages/cpp/cppsupportpart.cpp:257 msgid "Switch between header and implementation files" msgstr "在头文件和实现文件之间切换" #: languages/cpp/cppsupportpart.cpp:258 msgid "" "Switch Header/Implementation

If you are currently looking at a " "header file, this brings you to the corresponding implementation file. If " "you are looking at an implementation file (.cpp etc.), this brings you to " "the corresponding header file." msgstr "" "在头文件和实现文件之间切换

如果您当前在查看头文件,这将让您查看相应" "的实现文件。如果您在查看实现文件(如 cpp),这将让您查看相应的头文件。" #: languages/cpp/cppsupportpart.cpp:267 languages/php/phpsupportpart.cpp:128 msgid "Complete Text" msgstr "补全文本" #: languages/cpp/cppsupportpart.cpp:270 msgid "Complete current expression" msgstr "补全当前表达式" #: languages/cpp/cppsupportpart.cpp:271 #, fuzzy msgid "" "Complete Text

Completes current expression using memory class store " "for the current project and persistent class stores for external libraries." msgstr "" "补全文本

对当前工程使用内存类存储补全当前表达式,对外部库则使用持久" "类存储。" #: languages/cpp/cppsupportpart.cpp:276 msgid "Create Accessor Methods" msgstr "创建访问器方法" #: languages/cpp/cppsupportpart.cpp:280 languages/cpp/cppsupportpart.cpp:690 msgid "Make Member" msgstr "创建成员" #: languages/cpp/cppsupportpart.cpp:283 msgid "Make member" msgstr "创建成员" #: languages/cpp/cppsupportpart.cpp:284 languages/cpp/cppsupportpart.cpp:691 msgid "" "Make member

Creates a class member function in implementation file " "based on the member declaration at the current line." msgstr "创建成员

在实现文件中创建本行中定义的类的成员函数。" #: languages/cpp/cppsupportpart.cpp:288 #, fuzzy msgid "Navigation Menu" msgstr "调用模式" #: languages/cpp/cppsupportpart.cpp:291 msgid "Show the navigation-menu" msgstr "" #: languages/cpp/cppsupportpart.cpp:292 #, fuzzy msgid "" "Navigate

Shows a navigation-menu based on the type-evaluation of " "the item under the cursor." msgstr "切换断点

在变量/察看列表中增加一个表达式。" #: languages/cpp/cppsupportpart.cpp:296 languages/java/javasupportpart.cpp:160 #: parts/classview/classviewwidget.cpp:74 msgid "New Class..." msgstr "新建类..." #: languages/cpp/cppsupportpart.cpp:299 languages/java/javasupportpart.cpp:163 msgid "Generate a new class" msgstr "创建一个新类" #: languages/cpp/cppsupportpart.cpp:300 msgid "New Class

Calls the New Class wizard." msgstr "新建类

调用新类向导。" #: languages/cpp/cppsupportpart.cpp:438 languages/cpp/cppsupportpart.cpp:1966 #: languages/cpp/cppsupportpart.cpp:2268 msgid "C++ Support" msgstr "C++ 支持" #: languages/cpp/cppsupportpart.cpp:446 msgid "C++ Class Generator" msgstr "C++ 类生成器" #: languages/cpp/cppsupportpart.cpp:451 msgid "C++ Parsing" msgstr "C++ 分析" #: languages/cpp/configproblemreporter.ui:24 #: languages/cpp/cppsupportpart.cpp:585 #, no-c-format msgid "Problem Reporter" msgstr "问题报告者" #: languages/cpp/cppsupportpart.cpp:739 parts/classview/classtreebase.cpp:43 msgid "Go to Declaration" msgstr "查看声明" #: languages/cpp/cppsupportpart.cpp:740 msgid "" "Go to declaration

Provides a menu to select available function " "declarations in the current file and in the corresponding header (if the " "current file is an implementation) or source (if the current file is a " "header) file." msgstr "" "跳转到声明

提供一个菜单来选择当前文件和对应的头文件(如果当前文件是实" "现文件)或源文件(如果当前文件是头文件)中的函数声明。" #: languages/cpp/cppsupportpart.cpp:783 parts/classview/classtreebase.cpp:45 msgid "Go to Definition" msgstr "查看定义" #: languages/cpp/cppsupportpart.cpp:784 msgid "" "Go to definition

Provides a menu to select available function " "definitions in the current file and in the corresponding header (if the " "current file is an implementation) or source (if the current file is a " "header) file." msgstr "" "跳转到定义

提供一个菜单来选择在当前文件和对应的头文件(如果当前文件是" "实现文件)或源文件(如果当前文件是头文件)中的函数定义。" #: languages/cpp/cppsupportpart.cpp:824 msgid "Extract Interface..." msgstr "提取接口..." #: languages/cpp/cppsupportpart.cpp:825 msgid "" "Extract interface

Extracts interface from the selected class and " "creates a new class with this interface. No implementation code is extracted " "and no implementation code is created." msgstr "" "提取接口

从选择的类中提取接口并以此创建新的类。不提取和创建实现代" "码。" #: languages/cpp/cppsupportpart.cpp:842 #: languages/python/pythonsupportpart.cpp:102 #: languages/ruby/rubysupport_part.cpp:671 msgid "Create or Select Implementation..." msgstr "创建或选择实现..." #: languages/cpp/cppsupportpart.cpp:843 #: languages/python/pythonsupportpart.cpp:103 #: languages/ruby/rubysupport_part.cpp:672 msgid "" "Create or select implementation

Creates or selects a subclass of " "selected form for use with integrated KDevDesigner." msgstr "" #: languages/cpp/cppsupportpart.cpp:1415 languages/cpp/cppsupportpart.cpp:1427 msgid "Please select a class." msgstr "请选择一个类。" #: languages/cpp/cppsupportpart.cpp:1966 languages/java/javasupportpart.cpp:713 #, fuzzy msgid "" "Persistent class store will be disabled: you have a wrong version of pcs " "installed.\n" "Remove old pcs files?" msgstr "" "持久类存储将被禁用:您安装的 pcs 版本不正确。\n" "要删除旧的 pcs 文件吗?" #: languages/cpp/cppsupportpart.cpp:2267 msgid "File %1 already exists" msgstr "文件 %1 已经存在" #: languages/cpp/debugger/breakpoint.cpp:265 #: languages/ruby/debugger/breakpoint.cpp:122 msgid "Disabled" msgstr "禁用的" #: languages/cpp/debugger/breakpoint.cpp:270 #: languages/ruby/debugger/breakpoint.cpp:127 msgid "Pending (add)" msgstr "待添加" #: languages/cpp/debugger/breakpoint.cpp:272 #: languages/ruby/debugger/breakpoint.cpp:129 msgid "Pending (clear)" msgstr "待清除" #: languages/cpp/debugger/breakpoint.cpp:274 #: languages/ruby/debugger/breakpoint.cpp:131 msgid "Pending (modify)" msgstr "待修改" #: languages/cpp/debugger/breakpoint.cpp:278 #: languages/ruby/debugger/breakpoint.cpp:135 msgid "Active" msgstr "激活" #: languages/cpp/debugger/breakpoint.cpp:421 #: languages/cpp/debugger/gdbbreakpointwidget.cpp:227 #, fuzzy msgid "" "_: Code breakpoint\n" "Code" msgstr "切换断点" #: languages/cpp/debugger/breakpoint.h:133 #: languages/ruby/debugger/breakpoint.h:89 msgid "Invalid" msgstr "无效" #: languages/cpp/debugger/breakpoint.h:285 #: languages/ruby/debugger/breakpoint.h:155 #: languages/ruby/debugger/rdbbreakpointwidget.cpp:210 msgid "Watchpoint" msgstr "观察点" #: languages/cpp/debugger/breakpoint.h:309 #, fuzzy msgid "Read Watchpoint" msgstr "观察点" #: languages/cpp/debugger/dbgpsdlg.cpp:59 #: languages/cpp/debugger/debuggerpart.cpp:306 #: languages/ruby/debugger/dbgpsdlg.cpp:61 msgid "Attach to Process" msgstr "粘连到进程" #: languages/cpp/debugger/dbgpsdlg.cpp:173 msgid "" "Could not parse output from the ps command.

The following " "line could not be parsed:%1" msgstr "" #: languages/cpp/debugger/dbgpsdlg.cpp:176 #: languages/cpp/debugger/gdbcontroller.cpp:298 #: languages/cpp/debugger/variablewidget.cpp:766 #, fuzzy msgid "Internal error" msgstr "内部错误" #: languages/cpp/debugger/dbgtoolbar.cpp:112 #: languages/cpp/debugger/dbgtoolbar.cpp:245 #: languages/ruby/debugger/dbgtoolbar.cpp:118 #: languages/ruby/debugger/dbgtoolbar.cpp:244 msgid "Debug Toolbar" msgstr "调试工具栏" #: languages/cpp/debugger/dbgtoolbar.cpp:113 #: languages/ruby/debugger/dbgtoolbar.cpp:119 msgid "Dock to Panel" msgstr "停靠到面板" #: languages/cpp/debugger/dbgtoolbar.cpp:115 #: languages/ruby/debugger/dbgtoolbar.cpp:121 #, fuzzy msgid "Dock to Panel && Iconify TDevelop" msgstr "停靠到面板上并且将 KDevelop 缩为图标" #: languages/cpp/debugger/dbgtoolbar.cpp:225 #, fuzzy msgid "TDevelop debugger: Click to execute one line of code (\"step\")" msgstr "KDevelop 调试器:点击可执行一行代码(“单步”)" #: languages/cpp/debugger/dbgtoolbar.cpp:246 #: languages/ruby/debugger/dbgtoolbar.cpp:245 msgid "Activate" msgstr "激活" #: languages/cpp/debugger/dbgtoolbar.cpp:247 #: languages/ruby/debugger/dbgtoolbar.cpp:246 #, fuzzy msgid "Activate (TDevelop gets focus)" msgstr "激活(KDevelop 获得焦点)" #: languages/cpp/debugger/dbgtoolbar.cpp:302 #: languages/cpp/debugger/debuggerpart.cpp:216 #: languages/ruby/debugger/dbgtoolbar.cpp:301 #: languages/ruby/debugger/debuggerpart.cpp:179 msgid "Interrupt" msgstr "中断" #: languages/cpp/debugger/dbgtoolbar.cpp:307 #: languages/ruby/debugger/dbgtoolbar.cpp:304 msgid "Step Out" msgstr "跳出函数" #: languages/cpp/debugger/dbgtoolbar.cpp:308 #: languages/ruby/debugger/dbgtoolbar.cpp:305 msgid "Run to Cursor" msgstr "运行到光标处" #: languages/cpp/debugger/dbgtoolbar.cpp:309 #: languages/cpp/debugger/debuggerpart.cpp:283 msgid "Viewers" msgstr "调试器视图" #: languages/cpp/debugger/dbgtoolbar.cpp:325 #: languages/ruby/debugger/dbgtoolbar.cpp:318 msgid "Continue with application execution, may start the application" msgstr "继续执行应用程序,或者启动这个应用程序" #: languages/cpp/debugger/dbgtoolbar.cpp:326 #: languages/ruby/debugger/dbgtoolbar.cpp:319 msgid "Interrupt the application execution" msgstr "中断应用程序的运行" #: languages/cpp/debugger/dbgtoolbar.cpp:327 msgid "Execute one line of code, but run through functions" msgstr "执行一行代码,但不进入函数调用" #: languages/cpp/debugger/dbgtoolbar.cpp:328 msgid "Execute one assembler instruction, but run through functions" msgstr "执行一行汇编指令,但不进入函数调用" #: languages/cpp/debugger/dbgtoolbar.cpp:329 msgid "Execute one line of code, stepping into functions if appropriate" msgstr "执行一行代码,如果遇到函数调用则进入函数" #: languages/cpp/debugger/dbgtoolbar.cpp:330 msgid "" "Execute one assembler instruction, stepping into functions if appropriate" msgstr "执行一行汇编指令,如果遇到函数调用则进入函数" #: languages/cpp/debugger/dbgtoolbar.cpp:331 #: languages/ruby/debugger/dbgtoolbar.cpp:322 msgid "Execute to end of current stack frame" msgstr "执行到当前堆栈结构结束为止" #: languages/cpp/debugger/dbgtoolbar.cpp:332 #: languages/cpp/debugger/dbgtoolbar.cpp:344 #: languages/ruby/debugger/dbgtoolbar.cpp:323 #: languages/ruby/debugger/dbgtoolbar.cpp:334 msgid "Continues execution until the cursor position is reached." msgstr "继续运行程序到光标所在的行。" #: languages/cpp/debugger/dbgtoolbar.cpp:333 msgid "Memory, dissemble, registers, library viewers" msgstr "内存、反汇编、寄存器、库查看器" #: languages/cpp/debugger/dbgtoolbar.cpp:334 #: languages/ruby/debugger/dbgtoolbar.cpp:324 #, fuzzy msgid "Set focus on TDevelop" msgstr "把焦点放到 KDevelop 上" #: languages/cpp/debugger/dbgtoolbar.cpp:335 #: languages/ruby/debugger/dbgtoolbar.cpp:325 #, fuzzy msgid "Set focus on window that had focus when TDevelop got focus" msgstr "把焦点放到 KDeveop 获得焦点前拥有焦点的窗口" #: languages/cpp/debugger/dbgtoolbar.cpp:337 #: languages/ruby/debugger/dbgtoolbar.cpp:327 msgid "Continue with application execution. May start the application." msgstr "继续执行应用程序,或者启动这个应用程序。" #: languages/cpp/debugger/dbgtoolbar.cpp:338 #: languages/ruby/debugger/dbgtoolbar.cpp:328 msgid "Interrupt the application execution." msgstr "中断应用程序的运行。" #: languages/cpp/debugger/dbgtoolbar.cpp:339 msgid "Execute one line of code, but run through functions." msgstr "执行一行代码,但不进入函数调用。" #: languages/cpp/debugger/dbgtoolbar.cpp:340 msgid "Execute one assembler instruction, but run through functions." msgstr "执行一行汇编指令,但不进入函数调用。" #: languages/cpp/debugger/dbgtoolbar.cpp:341 msgid "Execute one line of code, stepping into functions if appropriate." msgstr "执行一行代码,如果可能则进入函数。" #: languages/cpp/debugger/dbgtoolbar.cpp:342 msgid "" "Execute one assembler instruction, stepping into functions if appropriate." msgstr "执行一行汇编指令,如果可能则进入函数。" #: languages/cpp/debugger/dbgtoolbar.cpp:343 #: languages/ruby/debugger/dbgtoolbar.cpp:333 msgid "Execute to end of current stack frame." msgstr "执行到当前堆栈结构结束为止。" #: languages/cpp/debugger/dbgtoolbar.cpp:345 msgid "Memory, dissemble, registers, library viewers." msgstr "内存、反汇编、寄存器、库视图。" #: languages/cpp/debugger/dbgtoolbar.cpp:346 #: languages/ruby/debugger/dbgtoolbar.cpp:335 #, fuzzy msgid "Set focus on TDevelop." msgstr "把焦点放到 KDevelop 上。" #: languages/cpp/debugger/dbgtoolbar.cpp:347 #: languages/ruby/debugger/dbgtoolbar.cpp:336 #, fuzzy msgid "Set focus on window that had focus when TDevelop got focus." msgstr "把焦点放到 KDeveop 获得焦点前拥有焦点的窗口" #: languages/cpp/debugger/debuggerpart.cpp:106 #: languages/ruby/debugger/debuggerpart.cpp:110 msgid "Breakpoint List" msgstr "断点列表" #: languages/cpp/debugger/debuggerpart.cpp:108 #: languages/ruby/debugger/debuggerpart.cpp:112 msgid "" "Breakpoint list

Displays a list of breakpoints with their current " "status. Clicking on a breakpoint item allows you to change the breakpoint " "and will take you to the source in the editor window." msgstr "" "断点列表

显示断点列表和它们的当前状态。用鼠标右键点击断点项目,就会" "弹出一个菜单,这样您就可以对这个断点进行操作。双击断点将会把您带到编辑窗口中" "的源文件处。" #: languages/cpp/debugger/debuggerpart.cpp:115 #: languages/ruby/debugger/debuggerpart.cpp:119 msgid "Breakpoints" msgstr "断点" #: languages/cpp/debugger/debuggerpart.cpp:115 #: languages/ruby/debugger/debuggerpart.cpp:119 msgid "Debugger breakpoints" msgstr "调试器断点" #: languages/cpp/debugger/debuggerpart.cpp:120 #: languages/ruby/debugger/debuggerpart.cpp:105 #: parts/snippet/snippetsettingsbase.ui:71 #, no-c-format msgid "Variables" msgstr "变量" #: languages/cpp/debugger/debuggerpart.cpp:121 #: languages/ruby/debugger/debuggerpart.cpp:105 msgid "Debugger variable-view" msgstr "调试器变量视图" #: languages/cpp/debugger/debuggerpart.cpp:126 #: languages/cpp/debugger/debuggerpart.cpp:137 #: languages/ruby/debugger/debuggerpart.cpp:123 #: languages/ruby/debugger/debuggerpart.cpp:134 msgid "Frame Stack" msgstr "堆栈框架" #: languages/cpp/debugger/debuggerpart.cpp:128 msgid "" "Frame stack

Often referred to as the \"call stack\", this is a list " "showing what function is currently active and who called each function to " "get to this point in your program. By clicking on an item you can see the " "values in any of the previous calling functions." msgstr "" "堆栈框架

通常又叫做“调用堆栈”,它是一个列表,显示当前运行的是哪个函" "数以及在您的程序中谁调用了每一个函数从而到达当前位置。点击一个项目您可以看到" "在前面调用的函数的参变量值。" #: languages/cpp/debugger/debuggerpart.cpp:137 msgid "Debugger function call stack" msgstr "调试器函数调用堆栈" #: languages/cpp/debugger/debuggerpart.cpp:142 msgid "Machine Code Display" msgstr "机器码显示" #: languages/cpp/debugger/debuggerpart.cpp:144 msgid "" "Machine code display

A machine code view into your running " "executable with the current instruction highlighted. You can step " "instruction by instruction using the debuggers toolbar buttons of \"step over" "\" instruction and \"step into\" instruction." msgstr "" "机器码显示

显示机器代码的视图,里面显示您当前运行的程序中的指令并且" "当前指令被加亮。您可以使用调试器工具栏中的“单步指令”和“单步跟进指令”按钮来逐" "条执行指令。" #: languages/cpp/debugger/debuggerpart.cpp:152 msgid "Disassemble" msgstr "反汇编" #: languages/cpp/debugger/debuggerpart.cpp:153 msgid "Debugger disassemble view" msgstr "调试器反汇编视图" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:278 #: languages/cpp/debugger/debuggerpart.cpp:159 #, fuzzy, no-c-format msgid "GDB Output" msgstr "GDB 输出" #: languages/cpp/debugger/debuggerpart.cpp:161 msgid "" "GDB output

Shows all gdb commands being executed. You can also " "issue any other gdb command while debugging." msgstr "" "GDB输出

显示所有被执行的 gdb 命令。您也可以在进行调试的时候使用其它 " "gdb 命令。" #: languages/cpp/debugger/debuggerpart.cpp:164 msgid "GDB" msgstr "GDB" #: languages/cpp/debugger/debuggerpart.cpp:165 msgid "GDB output" msgstr "GDB 输出" #: languages/cpp/debugger/debuggerpart.cpp:179 #, fuzzy msgid "Debug views" msgstr "调试器视图" #: languages/cpp/debugger/debuggerpart.cpp:180 #, fuzzy msgid "Special debugger views" msgstr "调试器视图" #: languages/cpp/debugger/debuggerpart.cpp:192 #: languages/ruby/debugger/debuggerpart.cpp:165 msgid "Start in debugger" msgstr "在调试器中运行" #: languages/cpp/debugger/debuggerpart.cpp:193 #: languages/ruby/debugger/debuggerpart.cpp:166 msgid "" "Start in debugger

Starts the debugger with the project's main " "executable. You may set some breakpoints before this, or you can interrupt " "the program while it is running, in order to get information about " "variables, frame stack, and so on." msgstr "" "在调试器中运行

在调试器里运行此工程的主要执行程序。开始前您可以先设" "置一些断点,或者您也可以在程序运行的时候中断它,查看变量、堆栈框架等信息。" #: languages/cpp/debugger/debuggerpart.cpp:200 msgid "&Restart" msgstr "重新启动(&R)" #: languages/cpp/debugger/debuggerpart.cpp:203 msgid "Restart program" msgstr "重新执行程序" #: languages/cpp/debugger/debuggerpart.cpp:204 msgid "Restarts application

Restarts applications from the beginning." msgstr "重新启动应用程序

从头开始运行应用程序。" #: languages/cpp/debugger/debuggerpart.cpp:210 #: languages/ruby/debugger/debuggerpart.cpp:173 msgid "Sto&p" msgstr "停止(&P)" #: languages/cpp/debugger/debuggerpart.cpp:213 #: languages/ruby/debugger/debuggerpart.cpp:176 msgid "Stop debugger" msgstr "停止调试" #: languages/cpp/debugger/debuggerpart.cpp:214 #: languages/ruby/debugger/debuggerpart.cpp:177 msgid "Stop debugger

Kills the executable and exits the debugger." msgstr "停止调试

杀死执行程序并且退出调试器。" #: languages/cpp/debugger/debuggerpart.cpp:219 #: languages/ruby/debugger/debuggerpart.cpp:182 msgid "Interrupt application" msgstr "中断程序的运行" #: languages/cpp/debugger/debuggerpart.cpp:220 msgid "" "Interrupt application

Interrupts the debugged process or current " "GDB command." msgstr "中断应用程序

中断被调试的进程或当前的 gdb 命令。" #: languages/cpp/debugger/debuggerpart.cpp:222 #: languages/cpp/debugger/debuggerpart.cpp:499 #: languages/ruby/debugger/debuggerpart.cpp:185 msgid "Run to &Cursor" msgstr "运行到光标行(&C)" #: languages/cpp/debugger/debuggerpart.cpp:225 #: languages/ruby/debugger/debuggerpart.cpp:188 msgid "Run to cursor" msgstr "运行到光标位置" #: languages/cpp/debugger/debuggerpart.cpp:226 #: languages/ruby/debugger/debuggerpart.cpp:189 msgid "" "Run to cursor

Continues execution until the cursor position is " "reached." msgstr "运行到光标位置

继续运行程序到光标所在的行。" #: languages/cpp/debugger/debuggerpart.cpp:229 msgid "Set E&xecution Position to Cursor" msgstr "将执行位置设定为光标处(&X)" #: languages/cpp/debugger/debuggerpart.cpp:232 msgid "Jump to cursor" msgstr "跳到光标位置" #: languages/cpp/debugger/debuggerpart.cpp:233 #, fuzzy msgid "" "Set Execution Position

Set the execution pointer to the current " "cursor position." msgstr "运行到光标位置

继续运行程序到光标所在的行。" #: languages/cpp/debugger/debuggerpart.cpp:236 #: languages/ruby/debugger/debuggerpart.cpp:192 msgid "Step &Over" msgstr "单步(&O)" #: languages/cpp/debugger/debuggerpart.cpp:239 #: languages/ruby/debugger/debuggerpart.cpp:195 msgid "Step over the next line" msgstr "单步执行到下一行" #: languages/cpp/debugger/debuggerpart.cpp:240 msgid "" "Step over

Executes one line of source in the current source file. " "If the source line is a call to a function the whole function is executed " "and the app will stop at the line following the function call." msgstr "" "单步

执行当前源文件中的一行源代码。如果这行源代码是一个函数调用,则" "执行完整个函数并且停在函数返回后的那行代码处。" #: languages/cpp/debugger/debuggerpart.cpp:247 msgid "Step over Ins&truction" msgstr "单步指令(&T)" #: languages/cpp/debugger/debuggerpart.cpp:250 msgid "Step over instruction" msgstr "单步指令" #: languages/cpp/debugger/debuggerpart.cpp:251 msgid "" "Step over instruction

Steps over the next assembly instruction." msgstr "单步指令

单步执行完下一条汇编指令。" #: languages/cpp/debugger/debuggerpart.cpp:254 #: languages/ruby/debugger/debuggerpart.cpp:203 msgid "Step &Into" msgstr "单步跟进(&I)" #: languages/cpp/debugger/debuggerpart.cpp:257 #: languages/ruby/debugger/debuggerpart.cpp:206 msgid "Step into the next statement" msgstr "单步跟进执行到下一条语句" #: languages/cpp/debugger/debuggerpart.cpp:258 msgid "" "Step into

Executes exactly one line of source. If the source line " "is a call to a function then execution will stop after the function has been " "entered." msgstr "" "单步跟进

仅执行一行源代码。如果这行源代码是一个函数调用,则进入函数" "后马上停在函数开始处。" #: languages/cpp/debugger/debuggerpart.cpp:264 msgid "Step into I&nstruction" msgstr "单步跟进指令(&N)" #: languages/cpp/debugger/debuggerpart.cpp:267 msgid "Step into instruction" msgstr "单步跟进指令" #: languages/cpp/debugger/debuggerpart.cpp:268 msgid "" "Step into instruction

Steps into the next assembly instruction." msgstr "单步跟进指令

单步跟进执行到下一条汇编指令。" #: languages/cpp/debugger/debuggerpart.cpp:271 #: languages/ruby/debugger/debuggerpart.cpp:214 msgid "Step O&ut" msgstr "跳出函数(&U)" #: languages/cpp/debugger/debuggerpart.cpp:274 msgid "Steps out of the current function" msgstr "执行到当前函数返回处" #: languages/cpp/debugger/debuggerpart.cpp:275 msgid "" "Step out

Executes the application until the currently executing " "function is completed. The debugger will then display the line after the " "original call to that function. If program execution is in the outermost " "frame (i.e. in main()) then this operation has no effect." msgstr "" "跳出函数

执行应用程序直到当前函数执行完毕。调试器将会显示原来调用该" "函数的地方之后的源代码。如果程序在最外层的框架执行(比如在 main() 中),这个操" "作将没有效果。" #: languages/cpp/debugger/debuggerpart.cpp:286 msgid "Debugger viewers" msgstr "调试器视图" #: languages/cpp/debugger/debuggerpart.cpp:287 msgid "" "Debugger viewers

Various information about application being " "executed. There are 4 views available:
Memory
Disassemble
Registers
Libraries" msgstr "" "调试器视图

关于被执行程序的多种信息。共有四个视图:
内存
反汇编
寄存器
" #: languages/cpp/debugger/debuggerpart.cpp:294 msgid "Examine Core File..." msgstr "检查溃核文件..." #: languages/cpp/debugger/debuggerpart.cpp:297 msgid "Examine core file" msgstr "检查溃核文件" #: languages/cpp/debugger/debuggerpart.cpp:298 msgid "" "Examine core file

This loads a core file, which is typically " "created after the application has crashed, e.g. with a segmentation fault. " "The core file contains an image of the program memory at the time it " "crashed, allowing you to do a post-mortem analysis." msgstr "" "检查溃核文件

加载 core 溃核文件。它通常在程序崩溃后产生,比如段错误" "等。溃核文件包含程序崩溃时的内存映像,能让您进行后期崩溃分析。" #: languages/cpp/debugger/debuggerpart.cpp:309 msgid "Attach to process" msgstr "粘连到进程" #: languages/cpp/debugger/debuggerpart.cpp:310 msgid "Attach to process

Attaches the debugger to a running process." msgstr "粘连到进程

将调试器粘连到正在运行的进程。" #: languages/cpp/debugger/debuggerpart.cpp:312 #: languages/cpp/debugger/debuggerpart.cpp:509 #: languages/ruby/debugger/debuggerpart.cpp:226 #: languages/ruby/debugger/debuggerpart.cpp:314 msgid "Toggle Breakpoint" msgstr "切换断点" #: languages/cpp/debugger/debuggerpart.cpp:315 #: languages/ruby/debugger/debuggerpart.cpp:229 msgid "Toggle breakpoint" msgstr "切换断点" #: languages/cpp/debugger/debuggerpart.cpp:316 #: languages/ruby/debugger/debuggerpart.cpp:230 msgid "" "Toggle breakpoint

Toggles the breakpoint at the current line in " "editor." msgstr "切换断点

在编辑器中切换当前断点。" #: languages/cpp/debugger/debuggerpart.cpp:399 #, fuzzy msgid "Debug in &TDevelop" msgstr "在 KDevelop 中调试(&K)" #: languages/cpp/debugger/debuggerpart.cpp:513 #: languages/ruby/debugger/debuggerpart.cpp:315 msgid "Toggle breakpoint

Toggles breakpoint at the current line." msgstr "切换断点

在当前行切换断点。" #: languages/cpp/debugger/debuggerpart.cpp:518 #, c-format msgid "Evaluate: %1" msgstr "计算:%1" #: languages/cpp/debugger/debuggerpart.cpp:522 #, fuzzy msgid "" "Evaluate expression

Shows the value of the expression under the " "cursor." msgstr "切换断点

在变量/察看列表中增加一个表达式。" #: languages/cpp/debugger/debuggerpart.cpp:523 #: languages/ruby/debugger/debuggerpart.cpp:320 #, c-format msgid "Watch: %1" msgstr "观察:%1" #: languages/cpp/debugger/debuggerpart.cpp:527 #, fuzzy msgid "" "Watch expression

Adds an expression under the cursor to the " "Variables/Watch list." msgstr "切换断点

在变量/察看列表中增加一个表达式。" #: languages/cpp/debugger/debuggerpart.cpp:563 msgid "Debugger" msgstr "调试器" #: languages/cpp/debugger/debuggerpart.cpp:662 #: languages/ruby/debugger/debuggerpart.cpp:481 msgid "Could not locate the debugging shell '%1'." msgstr "无法找到调试外壳程序“%1”。" #: languages/cpp/debugger/debuggerpart.cpp:663 #: languages/ruby/debugger/debuggerpart.cpp:482 msgid "Debugging Shell Not Found" msgstr "调试外壳程序没有找到" #: languages/cpp/debugger/debuggerpart.cpp:676 #: languages/cpp/debugger/debuggerpart.cpp:916 #: languages/ruby/debugger/debuggerpart.cpp:492 #: languages/ruby/debugger/debuggerpart.cpp:603 msgid "&Continue" msgstr "继续(&C)" #: languages/cpp/debugger/debuggerpart.cpp:679 #: languages/cpp/debugger/debuggerpart.cpp:917 #: languages/ruby/debugger/debuggerpart.cpp:494 #: languages/ruby/debugger/debuggerpart.cpp:604 msgid "Continues the application execution" msgstr "继续运行程序" #: languages/cpp/debugger/debuggerpart.cpp:681 #: languages/cpp/debugger/debuggerpart.cpp:918 #: languages/ruby/debugger/debuggerpart.cpp:495 #: languages/ruby/debugger/debuggerpart.cpp:605 msgid "" "Continue application execution\n" "\n" "Continues the execution of your application in the debugger. This only takes " "effect when the application has been halted by the debugger (i.e. a " "breakpoint has been activated or the interrupt was pressed)." msgstr "" "继续运行程序\n" "\n" "在调试器中继续执行您的应用程序。只有在您的应用程序被调试器暂停(比如断点被激活" "或者您按了中断)的时候,继续执行程序才有效。" #: languages/cpp/debugger/debuggerpart.cpp:743 #: languages/ruby/debugger/debuggerpart.cpp:572 msgid "Runs the program in the debugger" msgstr "在调试器里运行此程序" #: languages/cpp/debugger/debuggerpart.cpp:744 #: languages/ruby/debugger/debuggerpart.cpp:573 msgid "" "Start in debugger\n" "\n" "Starts the debugger with the project's main executable. You may set some " "breakpoints before this, or you can interrupt the program while it is " "running, in order to get information about variables, frame stack, and so on." msgstr "" "在调试器里运行\n" "\n" "在调试器里运行此工程的主要执行程序。开始前您可以先设置一些断点,或者您也可以" "在程序运行的时候中断它,查看变量、堆栈框架等信息。" #: languages/cpp/debugger/debuggerpart.cpp:771 msgid "" "GDB exited abnormally

This is likely a bug in GDB. Examine the gdb " "output window and then stop the debugger" msgstr "" #: languages/cpp/debugger/debuggerpart.cpp:774 msgid "GDB exited abnormally" msgstr "GDB 异常退出" #: languages/cpp/debugger/debuggerpart.cpp:834 #: languages/cpp/debugger/debuggerpart.cpp:836 #, fuzzy msgid "Rebuild the project?" msgstr "重新编译工程" #: languages/cpp/debugger/debuggerpart.cpp:835 msgid "

The project is out of date. Rebuild it?" msgstr "" #: languages/cpp/debugger/debuggerpart.cpp:888 #: languages/ruby/debugger/debuggerpart.cpp:611 msgid "Continuing program" msgstr "正在继续运行程序" #: languages/cpp/debugger/debuggerpart.cpp:902 #: languages/ruby/debugger/debuggerpart.cpp:597 msgid "Debugging program" msgstr "正在调试程序" #: languages/cpp/debugger/debuggerpart.cpp:924 msgid "Running program" msgstr "正在运行程序" #: languages/cpp/debugger/debuggerpart.cpp:951 msgid "Choose a core file to examine..." msgstr "选择要检查的溃核文件..." #: languages/cpp/debugger/debuggerpart.cpp:958 #, c-format msgid "Examining core file %1" msgstr "正在检查溃核文件 %1" #: languages/cpp/debugger/debuggerpart.cpp:967 msgid "Choose a process to attach to..." msgstr "选择要粘联的进程..." #: languages/cpp/debugger/debuggerpart.cpp:979 #, c-format msgid "Attaching to process %1" msgstr "正在粘联到进程 %1" #: languages/cpp/debugger/debuggerpart.cpp:1139 msgid "" "_: To start something\n" "Start" msgstr "启动" #: languages/cpp/debugger/debuggerpart.cpp:1140 #: languages/ruby/debugger/debuggerpart.cpp:707 msgid "Restart the program in the debugger" msgstr "在调试器里重新运行此程序" #: languages/cpp/debugger/debuggerpart.cpp:1141 #: languages/ruby/debugger/debuggerpart.cpp:708 msgid "" "Restart in debugger\n" "\n" "Restarts the program in the debugger" msgstr "" "在调试器里重新开始\n" "\n" "在调试器里重新开始运行此程序" #: languages/cpp/debugger/framestackwidget.cpp:561 #, fuzzy, c-format msgid "Thread %1" msgstr "线程" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:180 #: languages/ruby/debugger/rdbbreakpointwidget.cpp:158 msgid " temporary" msgstr " 临时" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:182 msgid " hw" msgstr " 硬件" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:219 #: languages/ruby/debugger/rdbbreakpointwidget.cpp:231 msgid "Status" msgstr "状态" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:221 msgid "Condition" msgstr "条件" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:222 msgid "Ignore Count" msgstr "忽略次数" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:223 msgid "Hits" msgstr "次数" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:224 msgid "Tracing" msgstr "跟踪" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:229 msgid "" "_: Data breakpoint\n" "Data write" msgstr "" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:231 msgid "" "_: Data read breakpoint\n" "Data read" msgstr "" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:236 #, fuzzy msgid "" "_: New breakpoint\n" "New" msgstr "添加空断点" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:238 #, fuzzy msgid "Show text" msgstr "新建文本" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:242 #: languages/cpp/debugger/gdbbreakpointwidget.cpp:724 #: languages/ruby/debugger/rdbbreakpointwidget.cpp:239 #: languages/ruby/debugger/rdbbreakpointwidget.cpp:663 msgid "Disable" msgstr "禁用" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:248 #, fuzzy msgid "Disable all" msgstr "禁用" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:249 #, fuzzy msgid "Enable all" msgstr "启用" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:250 #, fuzzy msgid "Delete all" msgstr "删除信号" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:375 msgid "" "Data write breakpoint
Expression: %1
Address: 0x%2
Old " "value: %3
New value: %4" msgstr "" #: languages/cpp/debugger/gdbbreakpointwidget.cpp:728 #: languages/ruby/debugger/rdbbreakpointwidget.cpp:667 msgid "Enable" msgstr "启用" #: languages/cpp/debugger/gdbcontroller.cpp:296 #, c-format msgid "" "Gdb command sent when debugger is not running
The command was:
" "%1" msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:391 msgid "Invalid debugger command
" msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:393 msgid "Invalid debugger command" msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:484 msgid "" "Invalid gdb reply

The 'stopped' packet does not include the " "'reason' field'." msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:486 msgid "The gdb reply is: bla-bla-bla" msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:487 #: languages/cpp/debugger/gdbcontroller.cpp:722 msgid "Invalid gdb reply" msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:502 #, fuzzy, c-format msgid "Exited on signal %1" msgstr "添加新信号" #: languages/cpp/debugger/gdbcontroller.cpp:556 msgid "Program received signal %1 (%2)" msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:558 #, fuzzy msgid "Received signal" msgstr "删除信号" #: languages/cpp/debugger/gdbcontroller.cpp:649 msgid "gdb message:\n" msgstr "gdb 消息:\n" #: languages/cpp/debugger/gdbcontroller.cpp:691 msgid "No such file or directory." msgstr "没有这个文件或目录。" #: languages/cpp/debugger/gdbcontroller.cpp:715 msgid "" "Invalid gdb reply\n" "Command was: %1\n" "Response is: %2\n" "Invalid response kind: \"%3\"" msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:846 msgid "" "Could not start debugger.

Could not run '%1'. Make sure that the " "path name is specified correctly." msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:850 msgid "Could not start debugger" msgstr "无法启动调试器" #: languages/cpp/debugger/gdbcontroller.cpp:1046 #: languages/ruby/debugger/rdbcontroller.cpp:836 msgid "Debugger stopped" msgstr "调试器已停止" #: languages/cpp/debugger/gdbcontroller.cpp:1111 msgid "" "GDB cannot use the tty* or pty* devices.\n" "Check the settings on /dev/tty* and /dev/pty*\n" "As root you may need to \"chmod ug+rw\" tty* and pty* devices and/or add the " "user to the tty group using \"usermod -G tty username\"." msgstr "" "gdb 无法使用tty* 或 pty* 设备。\n" "请检查 /dev/tty* 和 /dev/pty* 的设置\n" "\n" "您也许需要作为超级用户对 tty* 和 pty* 设备使用“chmod ug+rw”命令并且/或者使" "用“usermod -G tty username”命令将用户添加到 tty 组中。" #: languages/cpp/debugger/gdbcontroller.cpp:1157 msgid "" "Application does not exist

The application you are trying to debug," "
%1\n" "
does not exist. Check that you have specified the right application in " "the debugger configuration." msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:1163 #, fuzzy msgid "Application does not exist" msgstr "这个扩展名的文件模板不存在。" #: languages/cpp/debugger/gdbcontroller.cpp:1175 msgid "" "Could not run application '%1'.

The application does not have the " "executable bit set. Try rebuilding the project, or change permissions " "manually." msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:1180 msgid "Could not run application" msgstr "无法运行应用程序" #: languages/cpp/debugger/gdbcontroller.cpp:1355 #: languages/cpp/debugger/gdbcontroller.cpp:1725 #: languages/ruby/debugger/rdbcontroller.cpp:1286 msgid "Process exited" msgstr "进程已退出" #: languages/cpp/debugger/gdbcontroller.cpp:1362 msgid "Debugger error

Debugger reported the following error:

" msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:1365 #: languages/cpp/debugger/variablewidget.cpp:901 #, fuzzy msgid "Debugger error" msgstr "调试器视图" #: languages/cpp/debugger/gdbcontroller.cpp:1590 msgid "" "_: Internal debugger error\n" "

The debugger component encountered an internal error while processing a " "reply from gdb. Please submit a bug report." msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:1592 msgid "" "The exception is: %1\n" "The MI response is: %2" msgstr "" #: languages/cpp/debugger/gdbcontroller.cpp:1594 #, fuzzy msgid "Internal debugger error" msgstr "内部错误" #: languages/cpp/debugger/gdboutputwidget.cpp:57 msgid "&GDB cmd:" msgstr "GDB 命令(&G):" #: languages/cpp/debugger/gdboutputwidget.cpp:73 msgid "Pause execution of the app to enter gdb commands" msgstr "暂停程序运行来输入 gdb 命令" #: languages/cpp/debugger/gdboutputwidget.cpp:326 msgid "Show Internal Commands" msgstr "" #: languages/cpp/debugger/gdboutputwidget.cpp:334 msgid "" "Controls if commands issued internally by KDevelop will be shown or not." "
This option will affect only future commands, it will not add or remove " "already issued commands from the view." msgstr "" #: languages/cpp/debugger/gdboutputwidget.cpp:339 #, fuzzy msgid "Copy All" msgstr "全部关闭" #: languages/cpp/debugger/memviewdlg.cpp:94 #, fuzzy msgid "Start" msgstr "起始地址(&S):" #: languages/cpp/debugger/memviewdlg.cpp:100 #, fuzzy msgid "Amount" msgstr "自动" #: languages/cpp/debugger/memviewdlg.cpp:139 #, fuzzy msgid "Memory view" msgstr "内存查看:" #: languages/cpp/debugger/memviewdlg.cpp:346 #, fuzzy msgid "Change memory range" msgstr "改变属性名称" #: languages/cpp/debugger/memviewdlg.cpp:355 #, fuzzy msgid "Close this view" msgstr "关闭其它文件" #: languages/cpp/debugger/stty.cpp:332 languages/ruby/debugger/stty.cpp:316 msgid "tdevelop: Debug application console" msgstr "tdevelop:调试程序控制台" #: languages/cpp/debugger/variablewidget.cpp:84 #: languages/ruby/debugger/debuggerpart.cpp:95 msgid "Variable Tree" msgstr "变量树" #: languages/cpp/debugger/variablewidget.cpp:95 msgid "&Evaluate" msgstr "计算(&E)" #: languages/cpp/debugger/variablewidget.cpp:98 msgid "&Watch" msgstr "观察(&W)" #: languages/cpp/debugger/variablewidget.cpp:120 msgid "" "Variable tree

The variable tree allows you to see the values of " "local variables and arbitrary expressions.

Local variables are displayed " "automatically and are updated as you step through your program. For each " "expression you enter, you can either evaluate it once, or \"watch\" it (make " "it auto-updated). Expressions that are not auto-updated can be updated " "manually from the context menu. Expressions can be renamed to more " "descriptive names by clicking on the name column.

To change the value of a " "variable or an expression, click on the value." msgstr "" #: languages/cpp/debugger/variablewidget.cpp:134 msgid "Expression entry

Type in expression to evaluate." msgstr "" #: languages/cpp/debugger/variablewidget.cpp:138 msgid "Evaluate the expression." msgstr "计算表达式。" #: languages/cpp/debugger/variablewidget.cpp:141 msgid "Evaluate the expression and auto-update the value when stepping." msgstr "" #: languages/cpp/debugger/variablewidget.cpp:272 #, fuzzy msgid "Natural" msgstr "手册" #: languages/cpp/debugger/variablewidget.cpp:275 msgid "Hexadecimal" msgstr "十六进制" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:249 #: languages/cpp/debugger/variablewidget.cpp:278 #, no-c-format msgid "Decimal" msgstr "十进制" #: languages/cpp/debugger/variablewidget.cpp:281 #, fuzzy msgid "Character" msgstr "字符编码" #: languages/cpp/debugger/variablewidget.cpp:284 #, fuzzy msgid "Binary" msgstr "GBA 执行文件:" #: languages/cpp/debugger/variablewidget.cpp:291 #, fuzzy msgid "Format" msgstr "格式化" #: languages/cpp/debugger/variablewidget.cpp:301 msgid "Remember Value" msgstr "记住值" #: languages/cpp/debugger/variablewidget.cpp:307 msgid "Remove Watch Variable" msgstr "删除观察变量" #: languages/cpp/debugger/variablewidget.cpp:311 msgid "Watch Variable" msgstr "观察变量" #: languages/cpp/debugger/variablewidget.cpp:316 msgid "Reevaluate Expression" msgstr "重新计算表达式" #: languages/cpp/debugger/variablewidget.cpp:319 msgid "Remove Expression" msgstr "删除表达式" #: languages/cpp/debugger/variablewidget.cpp:325 #, fuzzy msgid "Data write breakpoint" msgstr "删除选中的断点" #: languages/cpp/debugger/variablewidget.cpp:330 #, fuzzy msgid "Copy Value" msgstr "值" #: languages/cpp/debugger/variablewidget.cpp:397 msgid "Recent Expressions" msgstr "最近的表达式" #: languages/cpp/debugger/variablewidget.cpp:399 msgid "Remove All" msgstr "全部删除" #: languages/cpp/debugger/variablewidget.cpp:401 msgid "Reevaluate All" msgstr "全部重新计算" #: languages/cpp/debugger/variablewidget.cpp:660 #, fuzzy msgid "Locals" msgstr "局部" #: languages/cpp/debugger/variablewidget.cpp:900 msgid "Debugger error
" msgstr "" #: languages/cpp/debugger/variablewidget.cpp:1984 #: languages/ruby/debugger/variablewidget.cpp:909 msgid "Watch" msgstr "观察" #: languages/cpp/includepathresolver.cpp:251 msgid "" "tried include-path-resolution while another resolution-process was still " "running" msgstr "" #: languages/cpp/includepathresolver.cpp:260 msgid "Makefile is missing in folder \"%1\"" msgstr "" #: languages/cpp/includepathresolver.cpp:260 #, fuzzy, c-format msgid "problem while trying to resolve include-paths for %1" msgstr "自动打开组" #: languages/cpp/includepathresolver.cpp:277 #, fuzzy msgid "Cached: " msgstr "KCachegrind" #: languages/cpp/includepathresolver.cpp:301 msgid "Filename %1 seems to be malformed" msgstr "" #: languages/cpp/includepathresolver.cpp:385 #, fuzzy msgid "Could not start the make-process" msgstr "无法写入工程文件。" #: languages/cpp/includepathresolver.cpp:390 #, fuzzy msgid "make-process finished with nonzero exit-status" msgstr "进程出错结束" #: languages/cpp/includepathresolver.cpp:390 #: languages/cpp/includepathresolver.cpp:395 #, fuzzy, c-format msgid "output: %1" msgstr "输出" #: languages/cpp/includepathresolver.cpp:395 #, fuzzy msgid "make-process failed" msgstr "进程已退出" #: languages/cpp/includepathresolver.cpp:474 #: languages/cpp/includepathresolver.cpp:477 #, fuzzy msgid "Recursive make-call failed" msgstr "递归 relocate" #: languages/cpp/includepathresolver.cpp:474 msgid "The parameter-string \"%1\" does not seem to be valid. Output was: %2" msgstr "" #: languages/cpp/includepathresolver.cpp:477 msgid "The directory \"%1\" does not exist. Output was: %2" msgstr "" #: languages/cpp/includepathresolver.cpp:481 #, fuzzy msgid "Recursive make-call malformed" msgstr "递归合并" #: languages/cpp/includepathresolver.cpp:481 #, fuzzy, c-format msgid "Output was: %2" msgstr "输出路径" #: languages/cpp/includepathresolver.cpp:491 msgid "Output seems not to be a valid gcc or g++ call" msgstr "" #: languages/cpp/includepathresolver.cpp:491 msgid "Folder: \"%1\" Command: \"%2\" Output: \"%3\"" msgstr "" #: languages/cpp/kdevdriver.cpp:178 #, fuzzy msgid "%1. Message: %2" msgstr "消息(&M):" #: languages/cpp/pcsimporter/customimporter/settingsdialog.cpp:44 msgid "Directories to Parse" msgstr "要分析的目录" #: languages/cpp/pcsimporter/qt4importer/settingsdialog.cpp:107 msgid "" "This does not appear to be a valid TQt4 include directory.\n" "Please select a different directory." msgstr "" #: languages/cpp/pcsimporter/qt4importer/settingsdialog.cpp:107 #: languages/cpp/pcsimporter/qtimporter/settingsdialog.cpp:115 #: languages/cpp/pcsimporter/tdelibsimporter/settingsdialog.cpp:92 #, fuzzy msgid "Invalid Directory" msgstr "本地目录" #: languages/cpp/pcsimporter/qtimporter/settingsdialog.cpp:115 msgid "" "This does not appear to be a valid TQt3 include directory.\n" "Please select a different directory." msgstr "" #: languages/cpp/pcsimporter/tdelibsimporter/settingsdialog.cpp:92 msgid "" "This does not appear to be a valid TDE include directory.\n" "Please select a different directory." msgstr "" #: languages/cpp/problemreporter.cpp:91 languages/java/problemreporter.cpp:84 #: languages/php/phperrorview.cpp:86 msgid "" "Problem reporter

This window shows various \"problems\" in your " "project. It displays TODO entries, FIXME's and errors reported by a language " "parser. To add a TODO or FIXME entry, just type
//@todo my todo
//TODO: my todo
//FIXME fix this" msgstr "" "问题报告

这个窗口显示您项目中的多种“问题”。它显示 TODO、FIXME 项目和" "语言分析器报告的错误。要添加 TODO 或者 FIXME 项目,只需要输入
//@todo " "my todo
//TODO: my todo
//FIXME fix this" #: languages/cpp/problemreporter.cpp:130 languages/php/phperrorview.cpp:120 msgid "Current" msgstr "当前" #: languages/cpp/problemreporter.cpp:131 languages/php/phperrorview.cpp:121 msgid "Errors" msgstr "错误" #: languages/cpp/problemreporter.cpp:132 #, fuzzy msgid "Warnings" msgstr "警告/错误" #: languages/cpp/problemreporter.cpp:133 languages/cpp/problemreporter.cpp:191 #: languages/cpp/problemreporter.cpp:323 languages/cpp/problemreporter.cpp:421 #: languages/php/phperrorview.cpp:122 languages/php/phperrorview.cpp:160 #: languages/php/phperrorview.cpp:274 languages/php/phperrorview.cpp:390 #, fuzzy msgid "Fixme" msgstr "字段" #: languages/cpp/problemreporter.cpp:134 languages/cpp/problemreporter.cpp:192 #: languages/cpp/problemreporter.cpp:324 languages/cpp/problemreporter.cpp:419 #: languages/php/phperrorview.cpp:123 languages/php/phperrorview.cpp:161 #: languages/php/phperrorview.cpp:275 languages/php/phperrorview.cpp:387 msgid "Todo" msgstr "待做" #: languages/cpp/problemreporter.cpp:135 languages/php/phperrorview.cpp:124 msgid "Filtered" msgstr "已过滤" #: languages/cpp/problemreporter.cpp:141 languages/php/phperrorview.cpp:132 #: parts/ctags2/ctags2_widgetbase.ui:85 #, no-c-format msgid "Lookup:" msgstr "查阅:" #: languages/cpp/problemreporter.cpp:178 languages/php/phperrorview.cpp:154 #, c-format msgid "Filtered: %1" msgstr "已过滤:%1" #: languages/cpp/problemreporter.cpp:224 languages/java/problemreporter.cpp:94 #: languages/php/phperrorview.cpp:185 msgid "Column" msgstr "列" #: languages/cpp/simpletype.cpp:24 #, fuzzy msgid "typeless" msgstr "样式(&S)" #: languages/cpp/simpletype.cpp:25 msgid "boolean value, 1 byte, ( \"true\" or \"false\" )" msgstr "" #: languages/cpp/simpletype.cpp:26 msgid "signed/unsigned character, 1 byte" msgstr "" #: languages/cpp/simpletype.cpp:27 msgid "signed character, 1 byte, ranged -128 to 127" msgstr "" #: languages/cpp/simpletype.cpp:28 msgid "unsigned character, 1 byte, ranged 0 to 255" msgstr "" #: languages/cpp/simpletype.cpp:29 msgid "wide character, 2 bytes, ranged 0 to 65.535" msgstr "" #: languages/cpp/simpletype.cpp:30 msgid "signed integer, 4 bytes, ranged -2.147.483.648 to 2.147.483.647" msgstr "" #: languages/cpp/simpletype.cpp:31 msgid "unsigned integer, 4 bytes, ranged 0 to 4.294.967.295" msgstr "" #: languages/cpp/simpletype.cpp:32 msgid "short integer, 2 bytes, ranged -32.768 to 32.768" msgstr "" #: languages/cpp/simpletype.cpp:33 msgid "unsigned short integer, 2 bytes, ranged 0 to 65.535" msgstr "" #: languages/cpp/simpletype.cpp:34 msgid "floating point value, 4 bytes, ranged ca. -3,4E+38 to 3,4E+38" msgstr "" #: languages/cpp/simpletype.cpp:35 msgid "double floating point value, 8 bytes, ranged ca. -1,8E+308 to 1,8E+308" msgstr "" #: languages/cpp/simpletype.cpp:36 msgid "" "double long floating point value, 10 bytes, ranged ca. -3,4E+4932 to 3,4E" "+4932" msgstr "" #: languages/cpp/simpletype.cpp:37 msgid "unsigned integer, byte-count dependent on operating-system" msgstr "" #: languages/cpp/subclassingdlg.cpp:190 #: languages/kjssupport/subclassingdlg.cpp:187 msgid "Create Subclass of " msgstr "创建子类,其父类为" #: languages/csharp/csharpdoc.cpp:46 languages/perl/perldoc.cpp:46 msgid "The only existing directories are functions and faq." msgstr "只存在 funtions 和 faq 目录。" #: languages/csharp/csharpdoc.cpp:91 #, fuzzy msgid "Error in csharpdoc" msgstr "pydoc 报告错误" #: languages/csharp/csharpsupportpart.cpp:68 #, fuzzy msgid "Runs the CSharp program" msgstr "运行 Perl 程序" #: languages/csharp/csharpsupportpart.cpp:70 #: languages/perl/perlsupportpart.cpp:70 #: languages/python/pythonsupportpart.cpp:69 msgid "Execute String..." msgstr "执行字符串..." #: languages/csharp/csharpsupportpart.cpp:73 #, fuzzy msgid "Executes a string as CSharp code" msgstr "把字符串当作 Perl 代码执行" #: languages/csharp/csharpsupportpart.cpp:75 #, fuzzy msgid "Start CSharp Interpreter" msgstr "启动 Perl 解释器" #: languages/csharp/csharpsupportpart.cpp:78 #, fuzzy msgid "Starts the CSharp interpreter without a program" msgstr "启动 Perl 解释器但不加载程序" #: languages/csharp/csharpsupportpart.cpp:80 #, fuzzy msgid "Find CSharp Function Documentation..." msgstr "查找 Perl 函数文档..." #: languages/csharp/csharpsupportpart.cpp:83 #, fuzzy msgid "Show the documentation page of a CSharp function" msgstr "显示 Perl 函数的文档页" #: languages/csharp/csharpsupportpart.cpp:85 #, fuzzy msgid "Find CSharp FAQ Entry..." msgstr "查找 Perl 常见问题项目..." #: languages/csharp/csharpsupportpart.cpp:88 #: languages/perl/perlsupportpart.cpp:88 msgid "Show the FAQ entry for a keyword" msgstr "显示某关键字的 Perl 常见问题项目" #: languages/csharp/csharpsupportpart.cpp:218 #: languages/perl/perlsupportpart.cpp:218 #: languages/python/pythonsupportpart.cpp:352 msgid "String to Execute" msgstr "要执行的字符串" #: languages/csharp/csharpsupportpart.cpp:218 #: languages/perl/perlsupportpart.cpp:218 #: languages/python/pythonsupportpart.cpp:352 msgid "String to execute:" msgstr "要执行的字符串:" #: languages/csharp/csharpsupportpart.cpp:230 #, fuzzy msgid "Show CSharp Documentation" msgstr "显示 Perl 文档" #: languages/csharp/csharpsupportpart.cpp:230 #, fuzzy msgid "Show CSharp documentation for function:" msgstr "显示此 Perl 函数的文档:" #: languages/csharp/csharpsupportpart.cpp:242 #: languages/perl/perlsupportpart.cpp:242 msgid "Show FAQ Entry" msgstr "显示常见问题项目" #: languages/csharp/csharpsupportpart.cpp:242 #: languages/perl/perlsupportpart.cpp:242 msgid "Show FAQ entry for keyword:" msgstr "显示此关键字的常见问题项目:" #: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:243 msgid "PGHPF Compiler Options" msgstr "PGHPF 编译器选项" #: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:243 msgid "PGF77 Compiler Options" msgstr "PGF77 编译器选项" #: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:255 msgid "HPF" msgstr "HPF" #: languages/fortran/fortransupportpart.cpp:67 msgid "&Ftnchek" msgstr "&Ftnchek" #: languages/fortran/fortransupportpart.cpp:70 msgid "Run ftnchek" msgstr "运行 Ftnchek" #: languages/fortran/fortransupportpart.cpp:71 msgid "" "Run ftnchek

Runs ftnchek to check fortran programs for " "semantic errors. Configure ftnchek options in project settings dialog, " "Ftnchek tab." msgstr "" "运行 ftnchek

运行 ftnchek来检查fortran程序的语义错误。在项目" "设置对话框Ftnchek标签配置ftnchek选项。" #: languages/fortran/fortransupportpart.cpp:85 msgid "There is currently a job running." msgstr "当前已经有一个进程在运行。" #: languages/fortran/fortransupportpart.cpp:160 msgid "Ftnchek" msgstr "Ftnchek" #: languages/fortran/ftnchekconfigwidget.cpp:93 msgid "Warn about inconsistent use of arguments that use arrays" msgstr "对使用数组的不一致的参数给出警告" #: languages/fortran/ftnchekconfigwidget.cpp:94 msgid "" "Warn about dummy arguments of a data type different from the actual arguments" msgstr "对形参和实参的数据类型不同给出警告" #: languages/fortran/ftnchekconfigwidget.cpp:96 msgid "" "Warn if the invocation assumes a different data type for the return type, " "different from the actual return type" msgstr "如果调用子程序时期待的返回数据类型和函数的实际返回类型不同则给出警告" #: languages/fortran/ftnchekconfigwidget.cpp:98 msgid "Warn about invoking a subprogram with an incorrect number of arguments" msgstr "如果调用子程序的参数个数不正确则给出警告" #: languages/fortran/ftnchekconfigwidget.cpp:104 msgid "" "Corresponding arrays in each declaration of a block must agree in size and " "number of dimensions" msgstr "每个声明块相对应的数组的尺寸和维数必须是一致的" #: languages/fortran/ftnchekconfigwidget.cpp:106 msgid "The comparison of two blocks is done variable-by-variable" msgstr "逐个变量比较两个声明块" #: languages/fortran/ftnchekconfigwidget.cpp:107 msgid "" "Warn if different declarations of the same block are not equal in total " "length" msgstr "如果同一个块的不同声明的总长度不同则给出警告" #: languages/fortran/ftnchekconfigwidget.cpp:108 msgid "" "In each declaration of a block, corresponding memory locations must agree in " "data type" msgstr "在块的每个声明里,相应的内存位置必须和数据类型一致" #: languages/fortran/ftnchekconfigwidget.cpp:115 msgid "Use of the result of integer division as an exponent" msgstr "把整数除法的结果用作指数" #: languages/fortran/ftnchekconfigwidget.cpp:116 msgid "Conversion of an expression involving an integer division to real" msgstr "将涉及到整数除法的表达式转换为实数运算" #: languages/fortran/ftnchekconfigwidget.cpp:117 msgid "Division in an integer constant expression that yields a result of zero" msgstr "结果为零的整数常量表达式里的除法" #: languages/fortran/ftnchekconfigwidget.cpp:123 msgid "" "A scalar dummy argument is actually the same as another and is (or may be) " "modified" msgstr "一个标量形参实际上和另一个是一样的,而且可能已被修改" #: languages/fortran/ftnchekconfigwidget.cpp:125 msgid "" "A dummy argument which is an array or array element is the same array as " "another and is modified" msgstr "一个数组或者数组元素形参和另一个是一样的,而且已被修改" #: languages/fortran/ftnchekconfigwidget.cpp:127 msgid "" "A scalar dummy argument is the same as a common variable in the subprogram, " "and either is modified" msgstr "一个标量形参和子程序里的一个公用变量是一样的,而且有一个已被修改" #: languages/fortran/ftnchekconfigwidget.cpp:134 msgid "ACCEPT and TYPE I/O statements" msgstr "ACCEPT 和 TYPE I/O 语句" #: languages/fortran/ftnchekconfigwidget.cpp:135 msgid "" "Expressions defining array bounds that contain array elements or function " "references" msgstr "定义数组范围、且包含数组元素或函数引用的表达式" #: languages/fortran/ftnchekconfigwidget.cpp:137 msgid "Assignment statements involving arrays" msgstr "涉及数组的赋值语句" #: languages/fortran/ftnchekconfigwidget.cpp:143 msgid "Backslash characters in strings" msgstr "字符串里的反斜线字符" #: languages/fortran/ftnchekconfigwidget.cpp:144 msgid "COMMON block variables not in descending order of storage sizes" msgstr "COMMON 公用块里的变量没有按存储尺寸递减的顺序声明" #: languages/fortran/ftnchekconfigwidget.cpp:145 msgid "Hollerith constants" msgstr "Hollerith 常数" #: languages/java/javasupportpart.cpp:164 msgid "New ClassGenerates a new class.

" msgstr "新建类

创建一个新类。" #: languages/java/javasupportpart.cpp:713 msgid "Java Support" msgstr "Java 支持" #: languages/java/javasupportpart.cpp:713 msgid "Keep Them" msgstr "保留" #: languages/java/problemreporter.cpp:238 msgid "Java Parsing" msgstr "Java 分析" #: languages/kjssupport/kjssupport_part.cpp:73 msgid "Test the active script." msgstr "" #: languages/kjssupport/kjssupport_part.cpp:90 #, fuzzy msgid "KJS Console" msgstr "Konsole" #: languages/kjssupport/kjssupport_part.cpp:90 #, fuzzy msgid "KJS Embed Console" msgstr "内嵌终端窗口" #: languages/kjssupport/kjssupport_part.cpp:429 #: languages/kjssupport/subclassingdlgbase.ui:16 #, no-c-format msgid "Implement Slots" msgstr "实现槽" #: languages/lib/debugger/debugger.cpp:198 msgid "Breakpoint" msgstr "断点" #: languages/lib/designer_integration/implementationwidget.cpp:80 #, c-format msgid "Create or Select Implementation Class for: %1" msgstr "" #: languages/lib/designer_integration/implementationwidget.cpp:82 msgid "Namespaces && Classes" msgstr "命名空间和类" #: languages/lib/designer_integration/implementationwidget.cpp:126 msgid "Class was created but not found in class store." msgstr "" #: languages/lib/designer_integration/tqtdesignerintegration.cpp:63 #, fuzzy, c-format msgid "Cannot find implementation class for form: %1" msgstr "无法写入工程文件。" #: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:46 msgid "Delphi Compiler Options" msgstr "Delphi 编译器选项" #: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:53 #: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:51 msgid "Locations I" msgstr "位置 1" #: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:56 #: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:54 msgid "Locations II" msgstr "位置 2" #: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:62 #: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:57 msgid "Debug && Optimization" msgstr "调试和优化" #: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:65 #: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:66 msgid "Linker" msgstr "连接器" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:32 msgid "Map File" msgstr "映射文件" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:36 msgid "Segments" msgstr "段信息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:38 msgid "Publics" msgstr "公开符号" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:40 msgid "Detailed" msgstr "详细信息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:45 msgid "Default dynamic loader:" msgstr "默认动态装载器:" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:50 msgid "Reserved address space:" msgstr "保留的地址空间:" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:87 msgid "Include search path (delimited by \":\"):" msgstr "头文件查找路径(用“:”分隔):" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:89 msgid "Resource search path (delimited by \":\"):" msgstr "资源文件查找路径(用“:”分隔):" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:91 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:105 msgid "Unit search path (delimited by \":\"):" msgstr "单元搜索路径(以“:”分隔):" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:93 msgid "Object search path (delimited by \":\"):" msgstr "OBJ 文件查找路径(用“:”分隔):" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:122 msgid "Executable output directory:" msgstr "执行文件输出目录:" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:124 msgid "Unit output directory:" msgstr "单元输出目录:" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:126 msgid "Package directory:" msgstr "打包目录:" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:128 msgid "Package source code directory:" msgstr "打包源代码目录:" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:159 msgid "Build all units" msgstr "构建全部单元" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:161 msgid "Make modified units" msgstr "编译修改过的单元" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:163 msgid "Quiet compile" msgstr "安静编译" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:165 msgid "Disable implicit package compilation" msgstr "禁用隐含的打包编译" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:170 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:484 msgid "Conditional defines (delimited by \":\"):" msgstr "条件定义(用“:”分隔):" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:173 msgid "Unit aliases in form unit=alias (delimited by \":\"):" msgstr "单元别名,形式为 unit=alias (用“:”分隔):" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:178 #: parts/doxygen/messages.cpp:92 parts/outputviews/makeviewpart.cpp:52 msgid "Messages" msgstr "消息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:180 msgid "Output hint messages" msgstr "输出提示消息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:182 msgid "Output warning messages" msgstr "输出警告消息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:186 msgid "Packages" msgstr "软件包" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:187 msgid "Build with packages (delimited by \":\"):" msgstr "构建用软件包(用“:”分隔):" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:223 msgid "Code Alignment && Stack Frames" msgstr "代码对齐和堆栈框架" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:224 msgid "Default (-$A8)" msgstr "默认 (-$A8)" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:227 msgid "Never align" msgstr "不对齐" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:229 msgid "On word boundaries" msgstr "整字边界" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:231 msgid "On double word boundaries" msgstr "双字边界" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:233 msgid "On quad word boundaries" msgstr "四字边界" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:235 msgid "Generate stack frames" msgstr "生成堆栈框架" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:239 msgid "Enumeration Size" msgstr "枚举大小" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:240 msgid "Default (-$Z1)" msgstr "默认 (-$Z1)" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:243 msgid "Unsigned byte (256 values)" msgstr "无符号字节(256 个值)" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:245 msgid "Unsigned word (64K values)" msgstr "无符号整字(64k 个值)" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:247 msgid "Unsigned double word (4096M values)" msgstr "无符号双字(4096M 个值)" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:251 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:464 msgid "Compile Time Checks" msgstr "编译时检查" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:253 msgid "Assertions" msgstr "断言" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:255 msgid "Complete boolean evaluation" msgstr "计算完整的布尔值" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:257 msgid "Extended syntax" msgstr "扩展语法" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:259 msgid "Long strings" msgstr "长字符串" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:261 msgid "Open string parameters" msgstr "不封闭的字符串参数" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:263 msgid "Type-checked pointers" msgstr "指针类型检查" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:265 msgid "Var-string checking" msgstr "变长字符串检查" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:267 msgid "Writable typed constants" msgstr "可写的类型常量" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:271 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:472 msgid "Run Time Checks" msgstr "运行时检查" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:273 msgid "Runtime type information" msgstr "运行时类型信息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:275 msgid "Imported data references" msgstr "导入的数据参照" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:277 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:478 msgid "Input/Output checking" msgstr "输入/输出检查" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:279 msgid "Overflow checking" msgstr "溢出检查" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:281 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:474 msgid "Range checking" msgstr "范围检查" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:320 msgid "Enable optimizations" msgstr "启用优化" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:327 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:338 msgid "Debugging" msgstr "调试" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:329 msgid "Debug information" msgstr "调试信息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:331 msgid "Local symbol information" msgstr "局部符号信息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:333 msgid "Debug information for GDB" msgstr "GDB 调试信息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:335 msgid "Namespace debug info" msgstr "名字空间调试信息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:337 msgid "Write symbol info in an .rsm file" msgstr "输出符号信息到 .rsm 文件" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:341 msgid "Symbol Reference Information" msgstr "符号参照信息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:342 msgid "Default (-$YD)" msgstr "默认 (-$YD)" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:345 msgid "No information" msgstr "无信息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:347 msgid "Definition information" msgstr "定义信息" #: languages/pascal/compiler/dccoptions/optiontabs.cpp:349 msgid "Full reference information" msgstr "完整的参照信息" #: buildtools/qmake/projectconfigurationdlgbase.ui:402 #: languages/pascal/compiler/dccoptions/optiontabs.cpp:355 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:409 #, no-c-format msgid "Release" msgstr "发布版本号" #: buildtools/ant/antoptionswidget.ui:32 #: buildtools/qmake/projectconfigurationdlgbase.ui:391 #: languages/pascal/compiler/dccoptions/optiontabs.cpp:356 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:410 #, no-c-format msgid "Debug" msgstr "调试" #: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:44 msgid "Free Pascal Compiler Options" msgstr "Pascal 编译器选项" #: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:48 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:213 msgid "Language" msgstr "语言" #: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:63 msgid "Assembler" msgstr "汇编器" #: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:69 msgid "Feedback" msgstr "反馈" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:34 msgid "Format errors like GCC does" msgstr "象 GCC 那样格式化错误" #: buildtools/ant/antoptionswidget.ui:27 #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:38 #, no-c-format msgid "Verbose" msgstr "详细" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:40 msgid "Write all possible info" msgstr "输出所有可能的信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:42 msgid "Write no messages" msgstr "不输出消息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:44 msgid "Show only errors" msgstr "只显示错误" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:46 msgid "Show some general information" msgstr "显示常规信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:48 msgid "Issue warnings" msgstr "给出警告" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:50 msgid "Issue notes" msgstr "给出备注" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:52 msgid "Issue hints" msgstr "给出提示" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:54 msgid "Write other debugging info" msgstr "输出其它调试信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:59 msgid "Other Information" msgstr "其它信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:61 msgid "Show line numbers when processing files" msgstr "处理文件时显示行号" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:63 msgid "Print information on loaded units" msgstr "显示已载入单元的信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:65 msgid "Print the names of loaded files" msgstr "显示已载入文件的名称" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:67 msgid "Write which macros are defined" msgstr "输出被定义的宏" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:69 msgid "Warn when processing a conditional" msgstr "处理条件时给出警告" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:71 msgid "Print the names of procedures and functions" msgstr "显示过程和函数的名称" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:73 msgid "Show all procedure declarations if an overloaded function error occurs" msgstr "当一个函数重载发生错误时显示所有的过程定义" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:107 msgid "Include file search path (delimited by \":\"):" msgstr "包含文件搜索路径(以“:”分隔):" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:109 msgid "Object file search path (delimited by \":\"):" msgstr "目标文件搜索路径(以“:”分隔):" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:111 msgid "Library search path (delimited by \":\"):" msgstr "库搜索文件(以“:”分隔):" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:142 msgid "Write executables and units in:" msgstr "输出执行程序和单元到:" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:144 msgid "Write units in:" msgstr "输出单元到:" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:146 msgid "Executable name:" msgstr "可执行文件名:" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:151 msgid "Location of as and ld programs:" msgstr "a s和 ld 程序的位置:" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:153 msgid "Dynamic linker executable:" msgstr "动态连接器执行文件:" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:158 msgid "Compiler messages file:" msgstr "编译器消息文件:" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:160 msgid "Write compiler messages to file:" msgstr "输出编译器消息到文件:" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:191 msgid "Pascal Compatibility" msgstr "Pascal 兼容性" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:193 msgid "Switch on Delphi 2 extensions" msgstr "启用 Delphi 2 的扩展" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:195 msgid "Strict Delphi compatibility mode" msgstr "严格的 Delphi 兼容模式" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:197 msgid "Borland TP 7.0 compatibility mode" msgstr "Borland TP 7.0 兼容模式" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:199 msgid "GNU Pascal compatibility mode" msgstr "GNU Pascal 兼容模式" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:203 msgid "C/C++ Compatibility" msgstr "C/C++ 兼容性" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:205 msgid "Support C style operators *=, +=, /=, -=" msgstr "支持 C 风格的操作符 *=、+=、/=、-=" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:207 msgid "Support C++ style INLINE" msgstr "支持 C++ 风格的内联" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:209 msgid "Support C style macros" msgstr "支持 C 风格的宏" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:215 msgid "Support the label and goto commands" msgstr "支持标号和跳转语句" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:217 msgid "Use ansistrings by default for strings" msgstr "strings 类默认使用 ansistrings" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:219 msgid "" "Require the name of constructors to be init\n" " and the name of destructors to be done" msgstr "需要初始化的构造函数名和结束处理的析构函数名" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:221 msgid "Allow the static keyword in objects" msgstr "在工程中允许静态关键字" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:251 msgid "Assembler Info" msgstr "汇编器信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:253 msgid "Do not delete assembler files" msgstr "不删除输出的汇编码中间文件" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:255 msgid "List source" msgstr "列出源代码" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:257 msgid "List register allocation and release info" msgstr "列出寄存器分配和释放信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:259 msgid "List temporary allocations and deallocations" msgstr "列出临时空间分配和释放" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:264 msgid "Assembler Reader" msgstr "汇编码阅读器" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:265 msgid "Use default reader" msgstr "使用默认阅读器" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:268 msgid "AT&T style assembler" msgstr "AT&T 风格的汇编码" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:270 msgid "Intel style assembler" msgstr "Intel 风格的汇编码" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:272 msgid "Direct assembler" msgstr "直接汇编器" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:278 msgid "Assembler Output" msgstr "汇编器输出" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:280 msgid "Use pipes instead of files when assembling" msgstr "汇编时使用管道而不是文件" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:281 msgid "Use default output" msgstr "使用默认输出" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:284 msgid "Use GNU as" msgstr "使用 GNU as" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:286 msgid "Use GNU asaout" msgstr "使用 GNU asaout" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:288 msgid "Use NASM coff" msgstr "使用 NASM coff" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:290 msgid "Use NASM elf" msgstr "使用 NASM coff" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:292 msgid "Use NASM obj" msgstr "使用 NASM obj" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:294 msgid "Use MASM" msgstr "使用 MASM" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:296 msgid "Use TASM" msgstr "使用 TASM" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:298 msgid "Use coff" msgstr "使用 coff" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:300 msgid "Use pecoff" msgstr "使用 pecoff" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:340 msgid "Generate information for GDB" msgstr "为 GDB 生成调试信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:342 msgid "Generate information for DBX" msgstr "为 DBX 生成调试信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:344 msgid "Use lineinfo unit" msgstr "使用 lineinfo 单元" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:346 msgid "Use heaptrc unit" msgstr "使用 heaptrc 单元" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:348 msgid "Generate checks for pointers" msgstr "生成运行时指针检查代码" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:353 msgid "Profiling" msgstr "剖析" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:355 msgid "Generate profiler code for gprof" msgstr "为 gprof 生成附加代码" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:362 msgid "General Optimization" msgstr "常规优化" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:366 msgid "Generate smaller code" msgstr "生成更小的代码" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:368 msgid "Generate faster code" msgstr "生成更快的代码" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:373 msgid "Optimization Levels" msgstr "优化级别" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:381 msgid "Level 3" msgstr "级别 3" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:388 msgid "Architecture" msgstr "体系结构" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:392 msgid "386/486" msgstr "386/486" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:394 msgid "Pentium/PentiumMMX" msgstr "奔腾/奔腾 MMX" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:396 msgid "PentiumPro/PII/Cyrix 6x86/K6" msgstr "奔腾 Pro/PII/Cyrix 6x86/K6" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:400 msgid "Another Optimization" msgstr "其它优化" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:402 msgid "Use register variables" msgstr "使用寄存器变量" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:404 msgid "Uncertain optimizations" msgstr "不确定的优化" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:466 msgid "Include assert statements in compiled code" msgstr "在编译生成的代码中插入断言语句" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:468 msgid "Do not check the unit name for being the same as the file name" msgstr "不检查单元名称和文件名是否相同" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:476 msgid "Stack checking" msgstr "堆栈检查" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:480 msgid "Integer overflow checking" msgstr "整数溢出检查" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:487 msgid "Undefine conditional defines (delimited by \":\"):" msgstr "不定义条件定义(用“:”分隔):" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:492 msgid "Stack size:" msgstr "栈大小:" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:494 msgid "Heap size:" msgstr "堆大小:" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:526 msgid "Linking Stage" msgstr "连接阶段" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:528 msgid "Create dynamic library" msgstr "创建动态库" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:530 msgid "Create smartlinked units" msgstr "创建智能连接单元" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:532 msgid "Generate release units" msgstr "生成发行单元" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:534 msgid "Omit the linking stage" msgstr "忽略连接阶段" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:536 msgid "Create assembling and linking script" msgstr "创建汇编和连接脚本" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:540 msgid "Executable Generation" msgstr "可执行文件生成" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:542 msgid "Strip the symbols from the executable" msgstr "剔除可执行文件中的符号信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:544 msgid "Link with static units" msgstr "用静态单元连接" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:546 msgid "Link with smartlinked units" msgstr "用智能连接单元连接" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:548 msgid "Link with dynamic libraries" msgstr "用动态库连接" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:550 msgid "Link with the C library" msgstr "用 C 代码库连接" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:555 msgid "Options passed to the linker (delimited by \":\"):" msgstr "传递给连接器的选项(用“:”分隔):" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:590 msgid "Recompile all used units" msgstr "重新编译所有用到的单元" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:592 msgid "Do not read default configuration file" msgstr "不读取默认配置文件" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:594 msgid "Compiler configuration file:" msgstr "编译器配置文件:" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:596 msgid "Stop after the error:" msgstr "发生如此多错误后停止:" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:600 msgid "Browser Info" msgstr "浏览器信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:601 msgid "No browser info" msgstr "无浏览器信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:604 msgid "Global browser info" msgstr "全局浏览器信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:606 msgid "Global and local browser info" msgstr "全局和局部浏览器信息" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:610 msgid "Target OS" msgstr "目标 OS" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:614 msgid "DOS and version 1 of the DJ DELORIE extender" msgstr "DOS 和 DJ DELORIE 扩展器版本 1" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:616 msgid "DOS and version 2 of the DJ DELORIE extender" msgstr "DOS 和 DJ DELORIE 扩展器版本 2" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:618 msgid "Linux" msgstr "Linux" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:620 msgid "OS/2 (2.x) using the EMX extender" msgstr "OS/2 (2.x) (使用 EMX 扩展器)" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:622 msgid "WINDOWS 32 bit" msgstr "WINDOWS 32位" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:624 msgid "SunOS/Solaris" msgstr "SunOS/Solaris" #: languages/pascal/compiler/fpcoptions/optiontabs.cpp:626 msgid "BeOS" msgstr "BeOS" #: languages/pascal/pascalsupport_part.cpp:72 msgid "problem reporter" msgstr "问题报告者" #: languages/pascal/pascalsupport_part.cpp:182 #, c-format msgid "" "_n: Found 1 problem\n" "Found %n problems" msgstr "发现 %n 个问题" #: languages/pascal/pascalsupport_part.cpp:194 #, c-format msgid "Parsing file: %1" msgstr "正在分析文件:%1" #: languages/perl/perldoc.cpp:91 msgid "Error in perldoc" msgstr "perldoc 报告错误" #: languages/perl/perlsupportpart.cpp:68 msgid "Runs the Perl program" msgstr "运行 Perl 程序" #: languages/perl/perlsupportpart.cpp:73 msgid "Executes a string as Perl code" msgstr "把字符串当作 Perl 代码执行" #: languages/perl/perlsupportpart.cpp:75 msgid "Start Perl Interpreter" msgstr "启动 Perl 解释器" #: languages/perl/perlsupportpart.cpp:78 msgid "Starts the Perl interpreter without a program" msgstr "启动 Perl 解释器但不加载程序" #: languages/perl/perlsupportpart.cpp:80 msgid "Find Perl Function Documentation..." msgstr "查找 Perl 函数文档..." #: languages/perl/perlsupportpart.cpp:83 msgid "Show the documentation page of a Perl function" msgstr "显示 Perl 函数的文档页" #: languages/perl/perlsupportpart.cpp:85 msgid "Find Perl FAQ Entry..." msgstr "查找 Perl 常见问题项目..." #: languages/perl/perlsupportpart.cpp:230 msgid "Show Perl Documentation" msgstr "显示 Perl 文档" #: languages/perl/perlsupportpart.cpp:230 msgid "Show Perl documentation for function:" msgstr "显示此 Perl 函数的文档:" #: languages/php/phpcodecompletion.cpp:709 msgid "Type of %1 is %2" msgstr "%1 的类型是 %2" #: languages/php/phperrorview.cpp:375 msgid "Undefined function" msgstr "未定义的函数" #: languages/php/phperrorview.cpp:378 msgid "Parse Error" msgstr "分析错误" #: languages/php/phpsupportpart.cpp:95 msgid "Run

Executes script on a terminal or a webserver." msgstr "运行

在终端或web服务器上运行脚本。" #: languages/php/phpsupportpart.cpp:97 msgid "&New Class..." msgstr "新建类(&N)..." #: languages/php/phpsupportpart.cpp:100 msgid "New class" msgstr "新建类" #: languages/php/phpsupportpart.cpp:101 msgid "New class

Runs New Class wizard." msgstr "新建类

运行新建类的向导。" #: languages/php/phpsupportpart.cpp:106 msgid "" "PHP problems

This view shows PHP parser warnings, errors, and fatal " "errors." msgstr "PHP错误

本视图显示PHP预处理警告,错误和严重错误。" #: languages/php/phpsupportpart.cpp:118 languages/php/phpsupportpart.cpp:333 msgid "PHP" msgstr "PHP" #: languages/php/phpsupportpart.cpp:211 msgid "PHP Specific" msgstr "PHP 特定设置" #: languages/php/phpsupportpart.cpp:211 languages/php/phpsupportpart.cpp:243 msgid "PHP Settings" msgstr "PHP 设置" #: languages/php/phpsupportpart.cpp:238 msgid "" "There is no configuration for executing a PHP file.\n" "Please set the correct values in the next dialog." msgstr "" "没有执行 PHP 文件需要的配置。\n" "请在下一个对话框里设置正确的值。" #: languages/php/phpsupportpart.cpp:239 msgid "Customize PHP Mode" msgstr "自定义 PHP 模式" #: languages/python/pydoc.cpp:71 msgid "Error in pydoc" msgstr "pydoc 报告错误" #: languages/python/pythonimplementationwidget.cpp:65 #: languages/ruby/rubyimplementationwidget.cpp:58 msgid "Cannot write to file" msgstr "无法写入文件" #: languages/python/pythonsupportpart.cpp:67 msgid "Execute program

Runs the Python program." msgstr "执行程序

运行 Python 程序。" #: languages/python/pythonsupportpart.cpp:72 msgid "Execute string" msgstr "执行字符串" #: languages/python/pythonsupportpart.cpp:73 msgid "Execute String

Executes a string as Python code." msgstr "执行字符串

把字符串作为 Python 代码执行。" #: languages/python/pythonsupportpart.cpp:75 msgid "Start Python Interpreter" msgstr "启动 Python 解释器" #: languages/python/pythonsupportpart.cpp:78 msgid "Start Python interpreter" msgstr "启动 Python 解释器" #: languages/python/pythonsupportpart.cpp:79 msgid "" "Start python interpreter

Starts the Python interpreter without a " "program" msgstr "启动 Python 解释器

启动 Python 解释器但不加载程序。" #: languages/python/pythonsupportpart.cpp:81 msgid "Python Documentation..." msgstr "Python 文档..." #: languages/python/pythonsupportpart.cpp:84 msgid "Python documentation" msgstr "Python 文档" #: languages/python/pythonsupportpart.cpp:85 msgid "Python documentation

Shows a Python documentation page." msgstr "Python 文档

显示 Python 文档页。" #: languages/python/pythonconfigwidgetbase.ui:16 #: languages/python/pythonsupportpart.cpp:111 #, no-c-format msgid "Python" msgstr "Python" #: languages/python/pythonsupportpart.cpp:364 msgid "Show Python Documentation" msgstr "显示 Python 文档" #: languages/python/pythonsupportpart.cpp:364 msgid "Show Python documentation on keyword:" msgstr "显示此关键字的 Python 文档:" #: languages/ruby/debugger/breakpoint.h:129 #: languages/ruby/debugger/rdbbreakpointwidget.cpp:209 msgid "File:line" msgstr "文件:行" #: languages/ruby/debugger/breakpoint.h:178 #: languages/ruby/debugger/rdbbreakpointwidget.cpp:211 #, fuzzy msgid "Catchpoint" msgstr "观察点" #: languages/ruby/debugger/breakpoint.h:201 #: languages/ruby/debugger/rdbbreakpointwidget.cpp:212 msgid "Method()" msgstr "方法" #: languages/ruby/debugger/dbgtoolbar.cpp:224 #, fuzzy msgid "TDevelop ruby debugger: Click to execute one line of code (\"step\")" msgstr "KDevelop 调试器:点击可执行一行代码(“单步”)" #: languages/ruby/debugger/dbgtoolbar.cpp:302 msgid "Step Over" msgstr "单步" #: languages/ruby/debugger/dbgtoolbar.cpp:303 msgid "Step Into" msgstr "单步跟进" #: languages/ruby/debugger/dbgtoolbar.cpp:320 #, fuzzy msgid "Execute one line of code, but run through methods" msgstr "执行一行代码,但不进入函数调用" #: languages/ruby/debugger/dbgtoolbar.cpp:321 #, fuzzy msgid "Execute one line of code, stepping into methods if appropriate" msgstr "执行一行代码,如果遇到函数调用则进入函数" #: languages/ruby/debugger/dbgtoolbar.cpp:329 #, fuzzy msgid "Execute one line of code, but run through methods." msgstr "执行一行代码,但不进入函数调用。" #: languages/ruby/debugger/dbgtoolbar.cpp:331 #, fuzzy msgid "Execute one line of code, stepping into methods if appropriate." msgstr "执行一行代码,如果可能则进入函数。" #: languages/ruby/debugger/debuggerpart.cpp:97 #, fuzzy msgid "" "Variable tree

The variable tree allows you to see the variable " "values as you step through your program using the internal debugger. Click " "the right mouse button on items in this view to get a popup menu.\n" "To speed up stepping through your code leave the tree items closed.\n" msgstr "" "变量树

变量树可以让您在使用内部调试器单步调试自己的应用程序时,看到" "变量的值。用鼠标右键点击视图中的项目会出现一个弹出式菜单。\n" "如果要加快单步执行代码的速度,请把树状视图中的项目关闭并且把变量加入到观察视" "图。\n" "如果您要在正在运行的程序中修改变量的值请使用观察区的变量 (例如 a=5)。" #: languages/ruby/debugger/debuggerpart.cpp:125 #, fuzzy msgid "" "Frame stack

Often referred to as the \"call stack\", this is a list " "showing what method is currently active and who called each method to get to " "this point in your program. By clicking on an item you can see the values in " "any of the previous calling methods." msgstr "" "堆栈框架

通常又叫做“调用堆栈”,它是一个列表,显示当前运行的是哪个函" "数以及在您的程序中谁调用了每一个函数从而到达当前位置。点击一个项目您可以看到" "在前面调用的函数的参变量值。" #: languages/ruby/debugger/debuggerpart.cpp:134 #, fuzzy msgid "Debugger method call stack" msgstr "调试器函数调用堆栈" #: languages/ruby/debugger/debuggerpart.cpp:141 msgid "RDB Output" msgstr "RDB 输出" #: languages/ruby/debugger/debuggerpart.cpp:143 #, fuzzy msgid "" "RDB output

Shows all rdb commands being executed. You can also " "issue any other rdb command while debugging." msgstr "" "GDB输出

显示所有被执行的 gdb 命令。您也可以在进行调试的时候使用其它 " "gdb 命令。" #: languages/ruby/debugger/debuggerpart.cpp:146 msgid "RDB" msgstr "RDB" #: languages/ruby/debugger/debuggerpart.cpp:147 msgid "RDB output" msgstr "RDB 输出" #: languages/ruby/debugger/debuggerpart.cpp:183 #, fuzzy msgid "" "Interrupt application

Interrupts the debugged process or current " "RDB command." msgstr "中断应用程序

中断被调试的进程或当前的 gdb 命令。" #: languages/ruby/debugger/debuggerpart.cpp:196 #, fuzzy msgid "" "Step over

Executes one line of source in the current source file. " "If the source line is a call to a method the whole method is executed and " "the app will stop at the line following the method call." msgstr "" "单步

执行当前源文件中的一行源代码。如果这行源代码是一个函数调用,则" "执行完整个函数并且停在函数返回后的那行代码处。" #: languages/ruby/debugger/debuggerpart.cpp:207 #, fuzzy msgid "" "Step into

Executes exactly one line of source. If the source line " "is a call to a method then execution will stop after the method has been " "entered." msgstr "" "单步跟进

仅执行一行源代码。如果这行源代码是一个函数调用,则进入函数" "后马上停在函数开始处。" #: languages/ruby/debugger/debuggerpart.cpp:217 #, fuzzy msgid "Steps out of the current method" msgstr "执行到当前函数返回处" #: languages/ruby/debugger/debuggerpart.cpp:218 #, fuzzy msgid "" "Step out

Executes the application until the currently executing " "method is completed. The debugger will then display the line after the " "original call to that method. If program execution is in the outermost frame " "(i.e. in the topleveltoggleWatchpoint) then this operation has no effect." msgstr "" "跳出函数

执行应用程序直到当前函数执行完毕。调试器将会显示原来调用该" "函数的地方之后的源代码。如果程序在最外层的框架执行(比如在 main() 中),这个操" "作将没有效果。" #: languages/ruby/debugger/debuggerpart.cpp:321 #, fuzzy msgid "" "Watch

Adds an expression under the cursor to the Variables/Watch " "list." msgstr "切换断点

在变量/察看列表中增加一个表达式。" #: languages/ruby/debugger/debuggerpart.cpp:323 #, fuzzy, c-format msgid "Inspect: %1" msgstr "子工程:%1" #: languages/ruby/debugger/debuggerpart.cpp:324 #, fuzzy msgid "Inspect

Evaluates an expression under the cursor." msgstr "切换断点

在变量/察看列表中增加一个表达式。" #: languages/ruby/debugger/debuggerpart.cpp:705 msgid "Restart" msgstr "重新开始" #: languages/ruby/debugger/rdbbreakpointwidget.cpp:182 msgid "Add empty breakpoint" msgstr "添加空断点" #: languages/ruby/debugger/rdbbreakpointwidget.cpp:182 msgid " " msgstr " " #: languages/ruby/debugger/rdbbreakpointwidget.cpp:183 #, fuzzy msgid "" "Add empty breakpoint

Shows a popup menu that allows you to choose " "the type of breakpoint, then adds a breakpoint of the selected type to the " "breakpoints list." msgstr "" "添加空断点

显示一个弹出菜单来选择断点类型。然后在断点列表中增加一个" "选定类型的断点。" #: languages/ruby/debugger/rdbbreakpointwidget.cpp:188 msgid "Delete selected breakpoint" msgstr "删除选中的断点" #: languages/ruby/debugger/rdbbreakpointwidget.cpp:188 msgid " " msgstr " <删除>" #: languages/ruby/debugger/rdbbreakpointwidget.cpp:189 msgid "" "Delete selected breakpoint

Deletes the selected breakpoint in the " "breakpoints list." msgstr "删除选择的断点

从断点列表中删除选择的断点。" #: languages/ruby/debugger/rdbbreakpointwidget.cpp:193 msgid "Edit selected breakpoint" msgstr "编辑选择的断点" #: languages/ruby/debugger/rdbbreakpointwidget.cpp:193 msgid " " msgstr " <返回>" #: languages/ruby/debugger/rdbbreakpointwidget.cpp:194 msgid "" "Edit selected breakpoint

Allows to edit location, condition and " "ignore count properties of the selected breakpoint in the breakpoints list." msgstr "" "编辑选择的断点

修改在断点列表中选择的断点的位置,条件和忽略计数属" "性。" #: languages/ruby/debugger/rdbbreakpointwidget.cpp:198 msgid "Remove all breakpoints" msgstr "删除所有断点" #: languages/ruby/debugger/rdbbreakpointwidget.cpp:199 msgid "Remove all breakpoints

Removes all breakpoints in the project." msgstr "删除所有断点

删除工程中的所有断点。" #: languages/ruby/debugger/rdbbreakpointwidget.cpp:237 msgid "Show" msgstr "显示" #: languages/ruby/debugger/rdbcontroller.cpp:349 #, fuzzy msgid "rdb message:\n" msgstr "gdb 消息:\n" #: languages/ruby/debugger/rdbcontroller.cpp:397 #: languages/ruby/debugger/rdbcontroller.cpp:399 #: languages/ruby/debugger/rdbcontroller.cpp:461 #: languages/ruby/debugger/rdbcontroller.cpp:508 #, c-format msgid "No source: %1" msgstr "没有源文件:%1" #: languages/ruby/debugger/rdbcontroller.cpp:706 #, fuzzy msgid "" "The ruby debugger cannot use the tty* or pty* devices.\n" "Check the settings on /dev/tty* and /dev/pty*\n" "As root you may need to \"chmod ug+rw\" tty* and pty* devices and/or add the " "user to the tty group using \"usermod -G tty username\"." msgstr "" "gdb 无法使用tty* 或 pty* 设备。\n" "请检查 /dev/tty* 和 /dev/pty* 的设置\n" "\n" "您也许需要作为超级用户对 tty* 和 pty* 设备使用“chmod ug+rw”命令并且/或者使" "用“usermod -G tty username”命令将用户添加到 tty 组中。" #: languages/ruby/debugger/rdboutputwidget.cpp:60 msgid "&RDB cmd:" msgstr "RDB 命令(&R):" #: languages/ruby/debugger/rdboutputwidget.cpp:76 #, fuzzy msgid "Pause execution of the app to enter rdb commands" msgstr "暂停程序运行来输入 gdb 命令" #: languages/ruby/debugger/variablewidget.cpp:56 msgid "E&xpression to watch:" msgstr "要观察的表达式(&X):" #: buildtools/autotools/configureoptionswidgetbase.ui:96 #: buildtools/autotools/managecustomcommandsbase.ui:30 #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:275 #: buildtools/custommakefiles/customotherconfigwidgetbase.ui:188 #: buildtools/pascal/pascalproject_optionsdlgbase.ui:90 #: kdevdesigner/designer/configtoolboxdialog.ui:109 #: kdevdesigner/designer/listeditor.ui:80 #: kdevdesigner/designer/variabledialog.ui:171 languages/ada/addclassdlg.ui:345 #: languages/cpp/cppnewclassdlgbase.ui:252 #: languages/cpp/pcsimporter/qt4importer/settingsdialogbase.ui:41 #: languages/cpp/pcsimporter/qtimporter/settingsdialogbase.ui:91 #: languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui:81 #: languages/java/configproblemreporter.ui:169 #: languages/ruby/debugger/variablewidget.cpp:62 #: lib/widgets/propeditor/qeditlistbox.cpp:121 parts/snippet/snippetdlg.ui:52 #, no-c-format msgid "&Add" msgstr "添加(&A)" #: languages/ruby/debugger/variablewidget.cpp:195 #, fuzzy msgid "Remove Watch Expression" msgstr "删除观察变量" #: languages/ruby/debugger/variablewidget.cpp:198 msgid "Copy to Clipboard" msgstr "复制到剪切板" #: kdevdesigner/designer/customwidgeteditor.ui:315 #: languages/cpp/cppnewclassdlgbase.ui:458 #: languages/ruby/debugger/variablewidget.cpp:834 #: parts/classview/classtreebase.cpp:154 #: src/profileengine/editor/profileeditor.cpp:139 #, no-c-format msgid "Global" msgstr "全局" #: languages/ruby/rubysupport_part.cpp:58 #: languages/ruby/rubysupport_part.cpp:61 #, fuzzy msgid "Run Test Under Cursor" msgstr "运行到光标处" #: languages/ruby/rubysupport_part.cpp:62 #, fuzzy msgid "" "Run Test Under Cursor

Runs the function under the cursor as test." msgstr "运行到光标位置

继续运行程序到光标所在的行。" #: languages/ruby/rubysupport_part.cpp:64 #: languages/ruby/rubysupport_part.cpp:65 #, fuzzy msgid "Launch Browser" msgstr "源代码浏览器" #: languages/ruby/rubysupport_part.cpp:66 msgid "" "Launch Browser

Opens a web browser pointing to the Ruby Rails server" msgstr "" #: languages/ruby/rubysupport_part.cpp:68 #, fuzzy msgid "Switch To Controller" msgstr "切换颜色(&T)" #: languages/ruby/rubysupport_part.cpp:69 #, fuzzy msgid "Switch To Model" msgstr "切换到" #: languages/ruby/rubysupport_part.cpp:70 #, fuzzy msgid "Switch To View" msgstr "切换到" #: languages/ruby/rubysupport_part.cpp:71 #, fuzzy msgid "Switch To Test" msgstr "切换到" #: languages/ruby/rubysupport_part.cpp:77 #: languages/ruby/rubysupport_part.cpp:78 msgid "Ruby Shell" msgstr "Ruby 脚本" #: languages/ruby/rubysupport_part.cpp:102 msgid "Ruby" msgstr "Ruby" #: languages/sql/sqlactions.cpp:81 msgid "" msgstr "<无数据库服务器>" #: languages/sql/sqlactions.cpp:89 msgid "" msgstr "<错误-没有连接 %1>" #: languages/sql/sqlconfigwidget.ui.h:181 msgid "Connection successful" msgstr "连接成功" #: languages/sql/sqlconfigwidget.ui.h:184 #, fuzzy msgid "Unable to connect to database server" msgstr "<无数据库服务器>" #: languages/sql/sqloutputwidget.cpp:81 #, c-format msgid "No such connection: %1" msgstr "无此连接:%1" #: languages/sql/sqloutputwidget.cpp:104 #, c-format msgid "Query successful, number of rows affected: %1" msgstr "查询成功,影响行数:%1" #: languages/sql/sqloutputwidget.cpp:111 languages/sql/sqloutputwidget.cpp:118 msgid "An error occurred:" msgstr "遇到错误:" #: languages/sql/sqloutputwidget.cpp:119 msgid "Driver" msgstr "驱动程序" #: languages/sql/sqlsupport_part.cpp:45 msgid "Run

Executes a SQL script." msgstr "运行

运行SQL脚本。" #: languages/sql/sqlsupport_part.cpp:47 msgid "&Database Connections" msgstr "数据库连接(&D)" #: buildtools/qmake/projectconfigurationdlgbase.ui:664 #: languages/sql/sqlsupport_part.cpp:59 #, no-c-format msgid "SQL" msgstr "SQL" #: languages/sql/sqlsupport_part.cpp:59 msgid "Output of SQL commands" msgstr "SQL 命令的输出" #: languages/sql/sqlsupport_part.cpp:60 msgid "" "Output of SQL commands

This window shows the output of SQL commands " "being executed. It can display results of SQL \"select\" commands in a table." msgstr "" "SQL命令输出

该窗口显示被执行的SQL命令。它能在一个表中显示\"select" "\"命令的结果。" #: languages/sql/sqlsupport_part.cpp:135 msgid "Specify Your Database Connections" msgstr "指定您的数据库连接" #: languages/sql/sqlsupport_part.cpp:167 msgid "Please select a valid database connection." msgstr "请选择一个有效的数据库连接。" #: lib/cppparser/driver.cpp:386 #, fuzzy, c-format msgid "Could not find include file %1" msgstr "无法找到插件" #: lib/cppparser/errors.cpp:23 msgid "Internal Error" msgstr "内部错误" #: lib/cppparser/errors.cpp:24 msgid "Syntax Error before '%1'" msgstr "在“%1”之前语法错误" #: lib/cppparser/errors.cpp:25 msgid "Parse Error before '%1'" msgstr "在“%1”之前发生分析错误" #: lib/cppparser/parser.cpp:140 msgid "" msgstr "<文件结尾>" #: lib/cppparser/parser.cpp:321 lib/cppparser/parser.cpp:2699 #: lib/cppparser/parser.cpp:2923 lib/cppparser/parser.cpp:2929 msgid "expression expected" msgstr "此处需要表达式" #: lib/cppparser/parser.cpp:583 msgid "Declaration syntax error" msgstr "声明语法错误" #: lib/cppparser/parser.cpp:630 lib/cppparser/parser.cpp:2817 #: lib/cppparser/parser.cpp:3290 msgid "} expected" msgstr "此处需要 }" #: lib/cppparser/parser.cpp:671 msgid "namespace expected" msgstr "此处需要 namespace" #: lib/cppparser/parser.cpp:675 msgid "{ expected" msgstr "此处需要 {" #: lib/cppparser/parser.cpp:748 lib/cppparser/parser.cpp:3010 msgid "Namespace name expected" msgstr "此处需要 namespace 名称" #: lib/cppparser/parser.cpp:852 msgid "Need a type specifier to declare" msgstr "声明中需要指定类型" #: lib/cppparser/parser.cpp:934 msgid "expected a declaration" msgstr "此处需要一个声明" #: lib/cppparser/parser.cpp:1208 lib/cppparser/parser.cpp:2190 msgid "Constant expression expected" msgstr "此处需要常量表达式" #: lib/cppparser/parser.cpp:1277 lib/cppparser/parser.cpp:1374 msgid "')' expected" msgstr "此处需要“)”" #: lib/cppparser/parser.cpp:1436 lib/cppparser/parser.cpp:1966 #: lib/cppparser/parser.cpp:2398 msgid "} missing" msgstr "缺少 }" #: lib/cppparser/parser.cpp:2088 msgid "Member initializers expected" msgstr "此处需要成员初始值" #: lib/cppparser/parser.cpp:2249 msgid "Base class specifier expected" msgstr "此处需要指定基类" #: lib/cppparser/parser.cpp:2272 msgid "Initializer clause expected" msgstr "此处需要初始化语句" #: lib/cppparser/parser.cpp:2313 msgid "Identifier expected" msgstr "此处需要标识符" #: lib/cppparser/parser.cpp:2343 msgid "Type id expected" msgstr "此处需要类型标识" #: lib/cppparser/parser.cpp:2380 msgid "Class name expected" msgstr "此处需要类名" #: lib/cppparser/parser.cpp:2662 lib/cppparser/parser.cpp:2842 #: lib/cppparser/parser.cpp:2880 lib/cppparser/parser.cpp:3352 msgid "condition expected" msgstr "此处需要条件" #: lib/cppparser/parser.cpp:2669 lib/cppparser/parser.cpp:2690 #: lib/cppparser/parser.cpp:2849 lib/cppparser/parser.cpp:2859 msgid "statement expected" msgstr "此处需要语句" #: lib/cppparser/parser.cpp:2725 msgid "for initialization expected" msgstr "此处需要 for 循环初始化" #: lib/cppparser/parser.cpp:3341 msgid "catch expected" msgstr "此处需要 catch" #: lib/util/execcommand.cpp:52 msgid "Could not invoke \"%1\". Please make sure it is installed correctly" msgstr "无法调用“%1”。请确保它已经正确安装。" #: lib/util/execcommand.cpp:53 msgid "Error Invoking Command" msgstr "执行命令时发生错误" #: lib/util/execcommand.cpp:59 msgid "Command running..." msgstr "命令正在运行..." #: lib/util/execcommand.cpp:60 msgid "Please wait until the \"%1\" command finishes." msgstr "请等待直到“%1”命令结束运行。" #: lib/util/tdescriptactionmanager.cpp:98 msgid "Unable to get KScript Runner for type \"%1\"." msgstr "" #: lib/util/tdescriptactionmanager.cpp:98 #, fuzzy msgid "KScript Error" msgstr "脚本" #: lib/widgets/flagboxes.cpp:98 msgid "Flags" msgstr "标志" #: lib/widgets/kdevhtmlpart.cpp:37 msgid "Reload

Reloads the current document." msgstr "重新载入

重新载入当前文档。" #: lib/widgets/kdevhtmlpart.cpp:40 msgid "Stop

Stops the loading of current document." msgstr "停止

停止载入当前文档。" #: lib/widgets/kdevhtmlpart.cpp:41 msgid "Duplicate Tab" msgstr "复制标签" #: lib/widgets/kdevhtmlpart.cpp:43 msgid "Duplicate window

Opens current document in a new window." msgstr "复制窗口

在新的窗口中打开当前文档。" #: lib/widgets/kdevhtmlpart.cpp:57 msgid "" "Back

Moves backwards one step in the documentation browsing " "history." msgstr "后退

文档浏览历史中往回退一步。" #: lib/widgets/kdevhtmlpart.cpp:69 msgid "" "Forward

Moves forward one step in the documentation browsing " "history." msgstr "前进

文档浏览历史中往前进一步。" #: lib/widgets/kdevhtmlpart.cpp:99 parts/documentation/docutils.cpp:81 msgid "Open in New Tab" msgstr "在新标签中打开" #: lib/widgets/kdevhtmlpart.cpp:100 msgid "Open in new window

Opens current link in a new window." msgstr "在新窗口中打开

在新窗口中打开当前链接。" #: lib/widgets/kdevtabwidget.cpp:38 msgid "Close &Others" msgstr "关闭其它的(&O)" #: lib/widgets/ksavealldialog.cpp:53 lib/widgets/ksavealldialog.cpp:144 msgid "Save Modified Files?" msgstr "保存已修改的文件吗?" #: lib/widgets/ksavealldialog.cpp:58 lib/widgets/ksavealldialog.cpp:151 msgid "The following files have been modified. Save them?" msgstr "下列文件已被修改,要保存它们吗?" #: lib/widgets/ksavealldialog.cpp:65 msgid "Save &Selected" msgstr "保存所选(&S)" #: lib/widgets/ksavealldialog.cpp:65 msgid "Saves all selected files" msgstr "保存所选中的全部文件" #: lib/widgets/ksavealldialog.cpp:66 lib/widgets/ksavealldialog.cpp:157 msgid "Save &None" msgstr "不保存(&N)" #: lib/widgets/ksavealldialog.cpp:68 lib/widgets/ksavealldialog.cpp:159 msgid "Lose all modifications" msgstr "放弃所有修改" #: lib/widgets/ksavealldialog.cpp:69 lib/widgets/ksavealldialog.cpp:160 msgid "Cancels the action" msgstr "取消操作" #: lib/widgets/ksavealldialog.cpp:156 msgid "Save &All" msgstr "全部保存(&A)" #: lib/widgets/ksavealldialog.cpp:156 msgid "Saves all modified files" msgstr "保存所有修改过的文件" #: lib/widgets/processwidget.cpp:230 parts/outputviews/makeitem.cpp:127 msgid "*** Exited with status: %1 ***" msgstr "*** 退出状态:%1 ***" #: lib/widgets/processwidget.cpp:233 msgid "*** Exited normally ***" msgstr "*** 正常退出 ***" #: lib/widgets/processwidget.cpp:239 #, fuzzy msgid "*** Process aborted. Segmentation fault ***" msgstr "*** 进程中止 ***" #: lib/widgets/processwidget.cpp:243 msgid "*** Process aborted ***" msgstr "*** 进程中止 ***" #: lib/widgets/propeditor/pcheckbox.cpp:69 msgid "true" msgstr "true" #: lib/widgets/propeditor/pcheckbox.cpp:69 msgid "false" msgstr "false" #: buildtools/ada/adaproject_optionsdlgbase.ui:154 #: buildtools/autotools/configureoptionswidgetbase.ui:249 #: buildtools/autotools/configureoptionswidgetbase.ui:286 #: buildtools/autotools/configureoptionswidgetbase.ui:526 #: buildtools/autotools/configureoptionswidgetbase.ui:693 #: buildtools/autotools/configureoptionswidgetbase.ui:827 #: buildtools/autotools/subprojectoptionsdlgbase.ui:95 #: buildtools/autotools/subprojectoptionsdlgbase.ui:170 #: buildtools/autotools/subprojectoptionsdlgbase.ui:245 #: buildtools/pascal/pascalproject_optionsdlgbase.ui:139 #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:135 #: kdevdesigner/designer/customwidgeteditor.ui:256 #: kdevdesigner/designer/customwidgeteditor.ui:303 #: kdevdesigner/designer/iconvieweditor.ui:262 #: kdevdesigner/designer/listboxeditor.ui:229 #: kdevdesigner/designer/listvieweditor.ui:236 #: kdevdesigner/designer/listvieweditor.ui:459 #: kdevdesigner/designer/projectsettings.ui:98 #: kdevdesigner/designer/projectsettings.ui:149 #: kdevdesigner/designer/tableeditor.ui:347 #: kdevdesigner/designer/tableeditor.ui:614 languages/ada/addclassdlg.ui:189 #: languages/cpp/addmethoddialogbase.ui:277 #: languages/php/phpconfigwidgetbase.ui:379 #: languages/php/phpconfigwidgetbase.ui:439 #: languages/php/phpconfigwidgetbase.ui:485 #: languages/php/phpnewclassdlgbase.ui:131 #: lib/widgets/propeditor/pfontbutton.cpp:43 #: lib/widgets/propeditor/ppixmapedit.cpp:54 #, no-c-format msgid "..." msgstr "..." #: lib/widgets/propeditor/pfontbutton.cpp:62 msgid " Bold" msgstr "粗体" #: lib/widgets/propeditor/pfontbutton.cpp:63 msgid " Italic" msgstr "斜体" #: kdevdesigner/designer/customwidgeteditor.ui:401 #: kdevdesigner/designer/customwidgeteditor.ui:482 #: lib/widgets/propeditor/propertymachinefactory.cpp:147 #, no-c-format msgid "Fixed" msgstr "固定" #: kdevdesigner/designer/customwidgeteditor.ui:406 #: kdevdesigner/designer/customwidgeteditor.ui:487 #: lib/widgets/propeditor/propertymachinefactory.cpp:148 #, no-c-format msgid "Minimum" msgstr "最小" #: kdevdesigner/designer/customwidgeteditor.ui:411 #: kdevdesigner/designer/customwidgeteditor.ui:492 #: lib/widgets/propeditor/propertymachinefactory.cpp:149 #, no-c-format msgid "Maximum" msgstr "最大" #: kdevdesigner/designer/customwidgeteditor.ui:416 #: kdevdesigner/designer/customwidgeteditor.ui:497 #: lib/widgets/propeditor/propertymachinefactory.cpp:150 #, no-c-format msgid "Preferred" msgstr "首选" #: kdevdesigner/designer/customwidgeteditor.ui:426 #: kdevdesigner/designer/customwidgeteditor.ui:507 #: lib/widgets/propeditor/propertymachinefactory.cpp:151 #, no-c-format msgid "Expanding" msgstr "展开" #: lib/widgets/propeditor/propertymachinefactory.cpp:152 #, fuzzy msgid "Minimum Expanding" msgstr "展开目录" #: lib/widgets/propeditor/propertymachinefactory.cpp:153 #, fuzzy msgid "Ignored" msgstr "忽略次数" #: lib/widgets/propeditor/propertymachinefactory.cpp:156 msgid "Horizontal Size Type" msgstr "" #: lib/widgets/propeditor/propertymachinefactory.cpp:157 #, fuzzy msgid "Vertical Size Type" msgstr "服务类型(&T)" #: lib/widgets/propeditor/propertymachinefactory.cpp:158 msgid "hStretch" msgstr "" #: lib/widgets/propeditor/propertymachinefactory.cpp:158 msgid "Horizontal Stretch" msgstr "" #: lib/widgets/propeditor/propertymachinefactory.cpp:159 msgid "vStretch" msgstr "" #: lib/widgets/propeditor/propertymachinefactory.cpp:159 msgid "Vertical Stretch" msgstr "" #: lib/widgets/propeditor/propertymachinefactory.cpp:166 msgid "Up Arrow" msgstr "" #: lib/widgets/propeditor/propertymachinefactory.cpp:180 #, fuzzy msgid "What's this" msgstr "这是什么?" #: lib/widgets/propeditor/pstringlistedit.cpp:85 msgid "Ok" msgstr "确定" #: buildtools/autotools/subprojectoptionsdlgbase.ui:340 #: buildtools/autotools/subprojectoptionsdlgbase.ui:717 #: buildtools/autotools/targetoptionsdlgbase.ui:333 #: languages/cpp/cppnewclassdlgbase.ui:302 #: languages/java/configproblemreporter.ui:158 #: lib/widgets/propeditor/qeditlistbox.cpp:137 #: parts/documentation/find_documentation_optionsbase.ui:74 #: parts/filecreate/fcconfigwidgetbase.ui:155 #: parts/fileview/filegroupsconfigwidgetbase.ui:153 #, no-c-format msgid "Move &Up" msgstr "上移(&U)" #: buildtools/autotools/subprojectoptionsdlgbase.ui:348 #: buildtools/autotools/subprojectoptionsdlgbase.ui:725 #: buildtools/autotools/targetoptionsdlgbase.ui:341 #: languages/cpp/cppnewclassdlgbase.ui:330 #: languages/java/configproblemreporter.ui:147 #: lib/widgets/propeditor/qeditlistbox.cpp:141 #: parts/documentation/find_documentation_optionsbase.ui:82 #: parts/filecreate/fcconfigwidgetbase.ui:163 #: parts/fileview/filegroupsconfigwidgetbase.ui:161 #, no-c-format msgid "Move &Down" msgstr "下移(&D)" #: lib/widgets/resizablecombo.cpp:63 msgid "Drag this to resize the combobox." msgstr "拖动此处改变组合框的大小。" #: parts/abbrev/abbrevpart.cpp:80 msgid "Expand Text" msgstr "展开文本" #: parts/abbrev/abbrevpart.cpp:83 msgid "Expand current word" msgstr "展开当前单词" #: parts/abbrev/abbrevpart.cpp:84 msgid "" "Expand current word

Current word can be completed using the list of " "similar words in source files." msgstr "" "展开当前单词

当前单词可以用源代码文件中的相似单词列表进行补全。" #: parts/abbrev/abbrevpart.cpp:86 msgid "Expand Abbreviation" msgstr "展开缩写" #: parts/abbrev/abbrevpart.cpp:89 msgid "Expand abbreviation" msgstr "展开缩写" #: parts/abbrev/abbrevpart.cpp:90 #, fuzzy msgid "" "Expand abbreviation

Enable and configure abbreviations in " "TDevelop Settings, Abbreviations tab." msgstr "" "展开缩写

启用和配置KDevelop 设置缩写页中的缩写项目。" #: parts/abbrev/abbrevpart.cpp:244 msgid "Abbreviations" msgstr "缩写" #: parts/appwizard/appwizarddlg.cpp:108 msgid "&Add to Favorites" msgstr "添加到收藏夹(&A)" #: parts/appwizard/appwizarddlg.cpp:111 msgid "&Remove Favorite" msgstr "删除收藏夹(&R)" #: parts/appwizard/appwizarddlg.cpp:288 msgid "Choose projects directory" msgstr "选择工程目录" #: parts/appwizard/appwizarddlg.cpp:338 msgid "" "_: no version control system\n" "None" msgstr "无" #: parts/appwizard/appwizarddlg.cpp:387 msgid "Version Control System" msgstr "版本控制系统" #: parts/appwizard/appwizarddlg.cpp:458 msgid "" "The directory you have chosen as the location for the project already exists." msgstr "您为工程指定的目录已经存在。" #: parts/appwizard/appwizarddlg.cpp:467 #, fuzzy msgid "" "The directory you have chosen as the location for the project is not " "writeable." msgstr "您为工程指定的目录已经存在。" #: parts/appwizard/appwizarddlg.cpp:489 #, fuzzy msgid "The template %1 cannot be opened." msgstr "这个项目无法删除" #: parts/appwizard/appwizarddlg.cpp:648 #, fuzzy msgid "The directory %1 cannot be created." msgstr "这个项目无法删除" #: parts/appwizard/appwizarddlg.cpp:667 #, fuzzy msgid "The archive %1 cannot be opened." msgstr "这个项目无法删除" #: parts/appwizard/appwizarddlg.cpp:685 parts/appwizard/appwizarddlg.cpp:827 #, fuzzy msgid "The file %1 cannot be created." msgstr "这个项目无法删除" #: parts/appwizard/appwizarddlg.cpp:693 msgid "" "The directory above the chosen location does not exist and cannot be created." msgstr "指定位置的目录不存在,而且无法创建。" #: parts/appwizard/appwizarddlg.cpp:896 msgid "Template for .%1 Files" msgstr "%1 文件的模板" #: parts/appwizard/appwizarddlg.cpp:922 #, fuzzy msgid "Set default project location to: %1?" msgstr "默认工程目录设置为:" #: parts/appwizard/appwizarddlg.cpp:923 #, fuzzy msgid "Set" msgstr "set" #: parts/appwizard/appwizarddlg.cpp:923 #, fuzzy msgid "Do Not Set" msgstr "简洁的编译器输出" #: parts/appwizard/appwizarddlg.cpp:949 msgid "" "_: invalid location\n" " (invalid)" msgstr " (无效)" #: parts/appwizard/appwizarddlg.cpp:951 #, fuzzy msgid " (dir/file already exists)" msgstr " (目录/文件已经存在)" #: parts/appwizard/appwizarddlg.cpp:1016 parts/appwizard/importdlg.cpp:152 #: src/projectmanager.cpp:375 msgid "" "This is not a valid project file.\n" "XML error in line %1, column %2:\n" "%3" msgstr "" "这不是一个有效的工程文件。\n" "%1 行 %2 列 XML 格式错误:\n" "%3" #: parts/appwizard/appwizardpart.cpp:45 msgid "&New Project..." msgstr "新建工程(&N)..." #: parts/appwizard/appwizardpart.cpp:48 msgid "Generate a new project from a template" msgstr "从模板生成新的工程" #: parts/appwizard/appwizardpart.cpp:49 msgid "" "New project

This starts KDevelop's application wizard. It helps you " "to generate a skeleton for your application from a set of templates." msgstr "" "新建工程

它启动 KDevelop 的应用程序向导。它能帮助您从模板为您的应用" "程序建立一个基本框架。" #: parts/appwizard/appwizardpart.cpp:54 msgid "&Import Existing Project..." msgstr "导入已有的工程(&I)..." #: parts/appwizard/appwizardpart.cpp:57 msgid "Import existing project" msgstr "导入已有的工程" #: parts/appwizard/appwizardpart.cpp:58 msgid "" "Import existing project

Creates a project file for a given " "directory." msgstr "导入已有的工程给

为给定的目录创建一个工程文件。" #: parts/appwizard/filepropspage.cpp:69 msgid "Header/Implementation file:" msgstr "头文件/实现文件:" #: parts/appwizard/importdlg.cpp:61 msgid "Choose directory to import" msgstr "选择要导入的目录" #: parts/appwizard/importdlg.cpp:111 msgid "You have to choose a directory." msgstr "您必须指定一个目录。" #: parts/appwizard/importdlg.cpp:117 msgid "You have to choose a project name." msgstr "您必须指定一个工程名称。" #: parts/appwizard/importdlg.cpp:123 msgid "Your application name should only contain letters and numbers." msgstr "您的应用程序名只能包含字母和数字。" #: parts/appwizard/importdlg.cpp:139 msgid "Cannot open project template." msgstr "无法打开工程模板。" #: parts/appwizard/importdlg.cpp:193 msgid "Cannot write the project file." msgstr "无法写入工程文件。" #: parts/appwizard/importdlg.cpp:553 msgid "Generate build system infrastrucure" msgstr "" #: parts/appwizard/importdlg.cpp:567 msgid "" "Project infrastrucure already exists in target directory.\n" "Generate new project infrastructure and overwrite old?" msgstr "" #: parts/appwizard/importdlg.cpp:567 #, fuzzy msgid "Generate" msgstr "生成(&G)" #: parts/appwizard/importdlg.cpp:567 #, fuzzy msgid "Do Not Generate" msgstr "生成(&G)" #: parts/astyle/astyle_part.cpp:53 msgid "&Reformat Source" msgstr "重新排版源代码(&R)" #: parts/astyle/astyle_part.cpp:55 msgid "Reformat source" msgstr "重新排版源代码" #: parts/astyle/astyle_part.cpp:56 msgid "" "Reformat source

Source reformatting functionality using astyle library. Also available in New Class and Subclassing " "wizards." msgstr "" "重新排版源代码

重新排版源代码功能使用astyle代码库,它也存在于" "新建类子类划分向导中。" #: parts/astyle/astyle_part.cpp:59 parts/astyle/astyle_part.cpp:61 #: parts/astyle/astyle_part.cpp:410 #, fuzzy msgid "Format files" msgstr "脚注文件" #: parts/astyle/astyle_part.cpp:62 #, fuzzy msgid "" "Fomat files

Formatting functionality using astyle library. " "Also available in New Class and Subclassing wizards." msgstr "" "重新排版源代码

重新排版源代码功能使用astyle代码库,它也存在于" "新建类子类划分向导中。" #: parts/astyle/astyle_part.cpp:67 parts/astyle/astyle_part.cpp:68 msgid "Formatting" msgstr "格式化" #: parts/astyle/astyle_part.cpp:402 #, fuzzy msgid "Format selection" msgstr "格式化" #: parts/astyle/astyle_part.cpp:403 msgid "Format

Formats the current selection, if possible" msgstr "" #: parts/astyle/astyle_part.cpp:411 #, fuzzy msgid "Format files

Formats selected files if possible" msgstr "提交文件

将修改过的文件提交到仓库。" #: parts/astyle/astyle_part.cpp:523 #, c-format msgid "Not able to write %1" msgstr "" #: parts/astyle/astyle_part.cpp:528 #, c-format msgid "Not able to read %1" msgstr "" #: parts/astyle/astyle_part.cpp:534 #, fuzzy msgid "Processed %1 files ending with extensions %2" msgstr "新文件名(和扩展名)(&N):" #: parts/bookmarks/bookmarks_part.cpp:59 msgid "" "Bookmarks

The bookmark viewer shows all the source bookmarks in the " "project." msgstr "书签

书签浏览器显示工程中的所有源代码书签。" #: parts/bookmarks/bookmarks_part.cpp:62 msgid "Source bookmarks" msgstr "源代码书签" #: parts/bookmarks/bookmarks_part.cpp:558 #, fuzzy msgid "Could not find file" msgstr "无法找到插件" #: parts/bookmarks/bookmarks_widget.cpp:270 msgid ", line " msgstr ", 行 " #: parts/bookmarks/bookmarks_widget.cpp:273 msgid "Remove This Bookmark" msgstr "删除这个书签" #: parts/bookmarks/bookmarks_widget.cpp:277 msgid ", All" msgstr ", 所有的" #: parts/bookmarks/bookmarks_widget.cpp:278 msgid "Remove These Bookmarks" msgstr "删除这些书签" #: parts/bookmarks/bookmarks_widget.cpp:283 #, fuzzy msgid "Collapse All" msgstr "折叠所有项目" #: parts/bookmarks/bookmarks_widget.cpp:284 #, fuzzy msgid "Expand All" msgstr "展开所有项目" #: parts/classview/classtooldlg.cpp:45 msgid "Show parents" msgstr "显示父类" #: parts/classview/classtooldlg.cpp:51 msgid "Show children" msgstr "显示子类" #: parts/classview/classtooldlg.cpp:57 msgid "Show clients" msgstr "显示客户" #: parts/classview/classtooldlg.cpp:63 msgid "Show suppliers" msgstr "显示提供者" #: parts/classview/classtooldlg.cpp:69 msgid "Show methods" msgstr "显示方法" #: parts/classview/classtooldlg.cpp:75 msgid "Show attributes" msgstr "显示属性" #: parts/classview/classtooldlg.cpp:80 parts/classview/classtooldlg.cpp:223 msgid "" "_: member access\n" "All" msgstr "所有" #: parts/classview/classtooldlg.cpp:81 parts/classview/classtooldlg.cpp:225 msgid "" "_: member access\n" "Public" msgstr "公共" #: parts/classview/classtooldlg.cpp:82 parts/classview/classtooldlg.cpp:227 msgid "" "_: member access\n" "Protected" msgstr "保护" #: parts/classview/classtooldlg.cpp:83 parts/classview/classtooldlg.cpp:229 msgid "" "_: member access\n" "Private" msgstr "私有" #: parts/classview/classtooldlg.cpp:84 parts/classview/classtooldlg.cpp:231 msgid "" "_: member access\n" "Package" msgstr "软件包" #: parts/classview/classtooldlg.cpp:287 msgid "Parents" msgstr "父类" #: parts/classview/classtooldlg.cpp:291 msgid "Children" msgstr "子类" #: parts/classview/classtooldlg.cpp:295 msgid "Clients" msgstr "客户" #: parts/classview/classtooldlg.cpp:299 msgid "Suppliers" msgstr "提供者" #: parts/classview/classtooldlg.cpp:303 msgid "%1 Methods" msgstr "%1 方法" #: parts/classview/classtooldlg.cpp:307 msgid "%1 Attributes" msgstr "%1 属性" #: parts/classview/classtooldlg.cpp:311 msgid "Class Tool Dialog" msgstr "类工具" #: parts/classview/classtooldlg.cpp:324 msgid "%1 of Class %2" msgstr "类 %2 的 %1" #: parts/classview/classtoolwidget.cpp:37 msgid "Class Tool" msgstr "类工具" #: parts/classview/classtreebase.cpp:55 parts/classview/classviewwidget.cpp:81 msgid "Add Method..." msgstr "添加方法..." #: parts/classview/classtreebase.cpp:57 parts/classview/classviewwidget.cpp:84 msgid "Add Attribute..." msgstr "添加属性..." #: parts/classview/classtreebase.cpp:59 msgid "Parent Classes..." msgstr "父类..." #: parts/classview/classtreebase.cpp:60 msgid "Child Classes..." msgstr "子类..." #: parts/classview/classtreebase.cpp:61 msgid "Class Tool..." msgstr "类工具..." #: parts/classview/classtreebase.cpp:65 msgid "Struct" msgstr "结构" #: parts/classview/classtreebase.cpp:71 msgid "Attribute" msgstr "属性" #: kdevdesigner/designer/editfunctions.ui:62 #: parts/classview/classtreebase.cpp:79 #, no-c-format msgid "Function" msgstr "函数" #: languages/cpp/subclassingdlgbase.ui:95 #: languages/kjssupport/subclassingdlgbase.ui:60 #: parts/classview/classtreebase.cpp:81 #, no-c-format msgid "Method" msgstr "方法" #: parts/classview/classviewpart.cpp:159 msgid "Class Browser" msgstr "类浏览器" #: parts/classview/classviewpart.cpp:160 msgid "Classes" msgstr "类" #: parts/classview/classviewpart.cpp:160 msgid "Class browser" msgstr "类浏览器" #: parts/classview/classviewpart.cpp:161 msgid "" "Class browser

The class browser shows all namespaces, classes and " "namespace and class members in a project." msgstr "" "类浏览器

类浏览器显示所有的名字空间、类、和工程中的名字空间和类成" "员。" #: parts/classview/classviewpart.cpp:198 #, fuzzy msgid "Functions Navigation" msgstr "查看函数声明" #: parts/classview/classviewpart.cpp:203 #, fuzzy msgid "Functions in file" msgstr "函数" #: parts/classview/classviewpart.cpp:204 msgid "" "Function navigator

Navigates over functions contained in the file." msgstr "" #: parts/classview/classviewpart.cpp:208 #, fuzzy msgid "Focus Navigator" msgstr "查看函数声明" #: parts/classview/classviewpart.cpp:212 #, fuzzy msgid "Class Inheritance Diagram" msgstr "继承图谱" #: parts/classview/classviewpart.cpp:213 #, fuzzy msgid "Class inheritance diagram" msgstr "继承图谱" #: parts/classview/classviewpart.cpp:214 #, fuzzy msgid "" "Class inheritance diagram

Displays inheritance relationship between " "classes in project. Note, it does not display classes outside inheritance " "hierarchy." msgstr "" "继承图谱

显示工程中的类之间的继承关系。注意,它不显示继承体系之外的" "类。" #: parts/classview/classviewwidget.cpp:69 msgid "Group by Directories" msgstr "按目录分组" #: parts/classview/classviewwidget.cpp:69 msgid "Plain List" msgstr "简单列表" #: parts/classview/classviewwidget.cpp:69 msgid "Java Like Mode" msgstr "类 Java 方式" #: parts/classview/classviewwidget.cpp:70 msgid "View Mode" msgstr "查看模式" #: parts/classview/classviewwidget.cpp:72 msgid "" "View mode

Class browser items can be grouped by directories, listed " "in a plain or java like view." msgstr "" "查看模式

类浏览器显示的项目可以按目录分组、简单列表或者显示为类似 " "Java 的视图。" #: parts/classview/classviewwidget.cpp:76 msgid "New class

Calls the New Class wizard." msgstr "新建类

启动新建类向导。" #: parts/classview/classviewwidget.cpp:78 #, fuzzy msgid "Create get/set Methods" msgstr "创建主方法 &main" #: parts/classview/classviewwidget.cpp:83 msgid "Add method

Calls the New Method wizard." msgstr "添加方法

启动新建方法向导。" #: parts/classview/classviewwidget.cpp:86 msgid "Add attribute

Calls the New Attribute wizard." msgstr "添加属性

启动新建属性向导。" #: parts/classview/classviewwidget.cpp:88 msgid "Open Declaration" msgstr "打开声明" #: parts/classview/classviewwidget.cpp:90 msgid "" "Open declaration

Opens a file where the selected item is declared " "and jumps to the declaration line." msgstr "打开声明

打开声明所选择的项目的文件,并转至声明所在的行。" #: parts/classview/classviewwidget.cpp:91 msgid "Open Implementation" msgstr "打开实现" #: parts/classview/classviewwidget.cpp:93 msgid "" "Open implementation

Opens a file where the selected item is defined " "(implemented) and jumps to the definition line." msgstr "" "打开实现

打开定义(实现)所选择的项目的文件,并转至定义所在的行。" #: parts/classview/classviewwidget.cpp:95 #, fuzzy msgid "Follow Editor" msgstr "显示编辑器(&S)" #: parts/classview/digraphview.cpp:228 #, fuzzy msgid "" "You do not have 'dot' installed.\n" "It can be downloaded from www.graphviz.org." msgstr "" "您没有安装“dot”。\n" "它能在 www.graphviz.org 下载。" #: parts/classview/hierarchydlg.cpp:52 #, fuzzy msgid "Refresh" msgstr "Lex 源文件" #: parts/classview/navigator.cpp:113 msgid "Sync ClassView" msgstr "" #: parts/classview/navigator.cpp:116 #, fuzzy msgid "Jump to next function" msgstr "跳至下一个匹配的项目" #: parts/classview/navigator.cpp:120 msgid "Jump to previous function" msgstr "" #: parts/classview/viewcombos.cpp:121 msgid "(Global Namespace)" msgstr "(全局名字空间)" #: parts/classview/viewcombos.h:32 #, fuzzy msgid "(Classes)" msgstr "(类)" #: parts/classview/viewcombos.h:33 msgid "(Functions)" msgstr "(函数)" #: parts/ctags2/ctags2_part.cpp:80 msgid "" "CTags

Result view for a tag lookup. Click a line to go to the " "corresponding place in the code." msgstr "" #: parts/ctags2/ctags2_part.cpp:81 #, fuzzy msgid "CTags Lookup" msgstr "分组:%1" #: parts/ctags2/ctags2_part.cpp:82 parts/ctags2/ctags2_part.cpp:87 msgid "CTags" msgstr "CTags" #: parts/ctags2/ctags2_part.cpp:82 #, fuzzy msgid "CTags lookup results" msgstr "分组:%1" #: parts/ctags2/ctags2_part.cpp:91 #, fuzzy msgid "Lookup Current Text" msgstr "此处需要一个声明" #: parts/ctags2/ctags2_part.cpp:92 #, fuzzy msgid "Lookup Current Text as Declaration" msgstr "此处需要一个声明" #: parts/ctags2/ctags2_part.cpp:93 #, fuzzy msgid "Lookup Current Text as Definition" msgstr "此处需要一个声明" #: parts/ctags2/ctags2_part.cpp:94 #, fuzzy msgid "Jump to Next Match" msgstr "跳至下一个匹配的项目" #: parts/ctags2/ctags2_part.cpp:95 msgid "Open Lookup Dialog" msgstr "" #: parts/ctags2/ctags2_part.cpp:197 #, fuzzy, c-format msgid "CTags - Go to Declaration: %1" msgstr "转至 ctags 声明:%1" #: parts/ctags2/ctags2_part.cpp:200 #, fuzzy, c-format msgid "CTags - Go to Definition: %1" msgstr "转至 ctags 定义:%1" #: parts/ctags2/ctags2_part.cpp:203 #, fuzzy, c-format msgid "CTags - Lookup: %1" msgstr "分组:%1" #: parts/ctags2/ctags2_widget.cpp:107 #, fuzzy, c-format msgid "Hits: %1" msgstr "次数" #: parts/ctags2/ctags2_widget.cpp:155 #, fuzzy msgid "No CTags database found" msgstr "没有找到标记" #: parts/ctags2/ctagskinds.cpp:29 msgid "define" msgstr "定义" #: parts/ctags2/ctagskinds.cpp:30 parts/ctags2/ctagskinds.cpp:98 msgid "label" msgstr "标号" #: parts/ctags2/ctagskinds.cpp:31 parts/ctags2/ctagskinds.cpp:60 #: parts/ctags2/ctagskinds.cpp:127 msgid "macro" msgstr "宏" #: kdevdesigner/designer/editfunctions.ui:498 parts/ctags2/ctagskinds.cpp:37 #: parts/ctags2/ctagskinds.cpp:44 parts/ctags2/ctagskinds.cpp:62 #: parts/ctags2/ctagskinds.cpp:95 parts/ctags2/ctagskinds.cpp:121 #: parts/ctags2/ctagskinds.cpp:133 parts/ctags2/ctagskinds.cpp:147 #: parts/ctags2/ctagskinds.cpp:154 parts/ctags2/ctagskinds.cpp:167 #: parts/ctags2/ctagskinds.cpp:174 parts/ctags2/ctagskinds.cpp:181 #: parts/ctags2/ctagskinds.cpp:187 parts/ctags2/ctagskinds.cpp:200 #, no-c-format msgid "function" msgstr "function" #: parts/ctags2/ctagskinds.cpp:38 parts/ctags2/ctagskinds.cpp:103 #: parts/ctags2/ctagskinds.cpp:140 parts/ctags2/ctagskinds.cpp:160 msgid "subroutine" msgstr "过程" #: parts/ctags2/ctagskinds.cpp:50 msgid "fragment definition" msgstr "片段定义" #: parts/ctags2/ctagskinds.cpp:51 msgid "any pattern" msgstr "任何模板" #: kdevdesigner/designer/editfunctions.ui:493 parts/ctags2/ctagskinds.cpp:52 #, no-c-format msgid "slot" msgstr "slot" #: parts/ctags2/ctagskinds.cpp:53 msgid "pattern" msgstr "模板" #: parts/ctags2/ctagskinds.cpp:59 parts/ctags2/ctagskinds.cpp:84 #: parts/ctags2/ctagskinds.cpp:111 parts/ctags2/ctagskinds.cpp:146 #: parts/ctags2/ctagskinds.cpp:153 parts/ctags2/ctagskinds.cpp:166 msgid "class" msgstr "类" #: parts/ctags2/ctagskinds.cpp:61 msgid "enumerator" msgstr "枚举算子" #: parts/ctags2/ctagskinds.cpp:63 msgid "enumeration" msgstr "枚举" #: parts/ctags2/ctagskinds.cpp:64 #, fuzzy msgid "local variable" msgstr "变量" #: parts/ctags2/ctagskinds.cpp:65 msgid "member" msgstr "成员" #: parts/ctags2/ctagskinds.cpp:66 parts/ctags2/ctagskinds.cpp:188 msgid "namespace" msgstr "名字空间" #: parts/ctags2/ctagskinds.cpp:67 msgid "prototype" msgstr "函数原型" #: parts/ctags2/ctagskinds.cpp:68 msgid "struct" msgstr "结构" #: parts/ctags2/ctagskinds.cpp:69 msgid "typedef" msgstr "类型定义" #: parts/ctags2/ctagskinds.cpp:70 msgid "union" msgstr "联合" #: parts/ctags2/ctagskinds.cpp:71 parts/ctags2/ctagskinds.cpp:105 msgid "variable" msgstr "变量" #: parts/ctags2/ctagskinds.cpp:72 msgid "external variable" msgstr "外部变量" #: parts/ctags2/ctagskinds.cpp:78 msgid "paragraph" msgstr "段落" #: parts/ctags2/ctagskinds.cpp:85 msgid "feature" msgstr "功能" #: parts/ctags2/ctagskinds.cpp:86 msgid "local entity" msgstr "局部实体" #: parts/ctags2/ctagskinds.cpp:92 msgid "block" msgstr "程序块" #: parts/ctags2/ctagskinds.cpp:93 msgid "common" msgstr "公用区" #: parts/ctags2/ctagskinds.cpp:94 msgid "entry" msgstr "项目" #: parts/ctags2/ctagskinds.cpp:96 parts/ctags2/ctagskinds.cpp:113 msgid "interface" msgstr "接口" #: parts/ctags2/ctagskinds.cpp:97 msgid "type component" msgstr "类型组件" #: parts/ctags2/ctagskinds.cpp:99 msgid "local" msgstr "本地" #: parts/ctags2/ctagskinds.cpp:100 msgid "module" msgstr "模块" #: parts/ctags2/ctagskinds.cpp:101 msgid "namelist" msgstr "名字列表" #: parts/ctags2/ctagskinds.cpp:102 msgid "program" msgstr "程序" #: parts/ctags2/ctagskinds.cpp:104 msgid "type" msgstr "类型" #: parts/ctags2/ctagskinds.cpp:112 msgid "field" msgstr "字段" #: parts/ctags2/ctagskinds.cpp:114 msgid "method" msgstr "方法" #: parts/ctags2/ctagskinds.cpp:115 msgid "package" msgstr "程序包" #: parts/ctags2/ctagskinds.cpp:134 parts/ctags2/ctagskinds.cpp:194 msgid "procedure" msgstr "过程" #: parts/ctags2/ctagskinds.cpp:168 msgid "mixin" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1383 parts/ctags2/ctagskinds.cpp:175 #, no-c-format msgid "set" msgstr "set" #: parts/diff/diffdlg.cpp:20 msgid "Difference Viewer" msgstr "差异查看器" #: parts/diff/diffpart.cpp:52 vcs/clearcase/clearcasepart.cpp:105 msgid "Diff" msgstr "比较" #: parts/diff/diffpart.cpp:53 #, fuzzy msgid "Diff Output" msgstr "GDB 输出" #: parts/diff/diffpart.cpp:54 #, fuzzy msgid "" "Difference viewer

Shows output of the diff format. Can utilize " "every installed component that is able to show diff output. For example if " "you have Kompare installed, Difference Viewer can use its graphical diff " "view." msgstr "" "差异查看器

按格式显示输出的差别。它能使用任何显示差别输出的组件。例" "如,如果您安装了 Kompare,差异查看器能用它显示图形化的差异视图。" #: parts/diff/diffpart.cpp:57 msgid "Output of the diff command" msgstr "比较命令的输出" #: parts/diff/diffpart.cpp:60 msgid "Difference Viewer..." msgstr "差异查看器..." #: parts/diff/diffpart.cpp:63 msgid "Difference viewer" msgstr "差异查看器" #: parts/diff/diffpart.cpp:64 msgid "Difference viewer

Shows the contents of a patch file." msgstr "差异查看器

显示补丁文件的内容。" #: parts/diff/diffpart.cpp:123 #, fuzzy msgid "Difference to Disk File" msgstr "和保存的文件的差异" #: parts/diff/diffpart.cpp:125 #, fuzzy msgid "" "Difference to disk file

Shows the difference between the file " "contents in this editor and the file contents on disk." msgstr "" "和保存的文件的差异

显示编辑器里的文件内容和磁盘上保存的文件内容之间" "的差异。" #: parts/diff/diffpart.cpp:168 msgid "Could not invoke the \"diff\" command." msgstr "无法运行“diff”命令。" #: parts/diff/diffpart.cpp:181 msgid "DiffPart: No differences found." msgstr "比较组件:未发现差异。" #: parts/diff/diffpart.cpp:185 msgid "Diff command failed (%1):\n" msgstr "比较命令失败(%1):\n" #: parts/diff/diffpart.cpp:240 msgid "Please Select Patch File" msgstr "请选择补丁文件" #: parts/diff/diffwidget.cpp:76 vcs/cvsservice/diffwidget.cpp:73 #, c-format msgid "Show in %1" msgstr "在 %1 中显示" #: parts/diff/diffwidget.cpp:83 vcs/cvsservice/diffwidget.cpp:80 msgid "&Save As..." msgstr "另存为(&S)..." #: parts/diff/diffwidget.cpp:88 vcs/cvsservice/diffwidget.cpp:85 msgid "Highlight Syntax" msgstr "加亮文法" #: parts/diff/diffwidget.cpp:93 parts/diff/diffwidget.cpp:326 #: parts/outputviews/appoutputwidget.cpp:271 #, fuzzy msgid "Hide view" msgstr "新建视图" #: parts/diff/diffwidget.cpp:112 vcs/cvsservice/diffwidget.cpp:106 msgid "Unable to open file." msgstr "无法打开文件。" #: parts/diff/diffwidget.cpp:112 vcs/cvsservice/diffwidget.cpp:106 msgid "Diff Frontend" msgstr "比较前端" #: parts/diff/diffwidget.cpp:324 vcs/cvsservice/diffwidget.cpp:315 msgid "Display &Raw Output" msgstr "显示原始输出(&R)" #: parts/distpart/distpart_part.cpp:48 msgid "Distribution && Publishing" msgstr "分发和发布" #: parts/distpart/distpart_part.cpp:52 msgid "Make source and binary distribution" msgstr "制做源代码和执行码发行版" #: parts/distpart/distpart_part.cpp:53 msgid "" "Project distribution & publishing

Helps users package and publish " "their software." msgstr "工程分发和发行

协助用户打包和发行他们的软件。" #: parts/distpart/distpart_part.cpp:56 msgid "Distribution & Publishing" msgstr "分发和发布" #: parts/distpart/distpart_widget.cpp:134 msgid "Building Package" msgstr "构建包" #: parts/distpart/distpart_widget.cpp:145 #, c-format msgid "Adding file: %1" msgstr "添加文件:%1" #: parts/distpart/distpart_widget.cpp:152 #, c-format msgid "Archive made at: %1" msgstr "" #: parts/distpart/distpart_widget.cpp:152 msgid "Archive Done" msgstr "存档完成" #: parts/distpart/distpart_widget.cpp:595 #, fuzzy, c-format msgid "Remove %1" msgstr "删除(&M)" #: parts/distpart/specsupport.cpp:78 parts/distpart/specsupport.cpp:177 msgid "You need to create a source archive first." msgstr "您需要先创建一个源代码压缩文件。" #: parts/documentation/bookmarkview.cpp:49 #: parts/documentation/docglobalconfigwidgetbase.ui:16 #: parts/documentation/documentation_part.cpp:88 #: parts/documentation/documentation_part.cpp:98 #: parts/documentation/documentation_part.cpp:106 #: parts/documentation/docutils.cpp:79 #, no-c-format msgid "Documentation" msgstr "文档" #: parts/documentation/bookmarkview.cpp:198 msgid "Edit Bookmark" msgstr "编辑书签" #: parts/documentation/bookmarkview.cpp:222 msgid "Current Document" msgstr "当前文档" #: parts/documentation/bookmarkview.cpp:223 msgid "Custom..." msgstr "自定义..." #: parts/documentation/bookmarkview.cpp:241 msgid "Add Bookmark" msgstr "添加书签" #: parts/documentation/docconfiglistview.cpp:29 msgid "TOC" msgstr "目录" #: parts/documentation/docconfiglistview.cpp:30 #: parts/documentation/documentation_widget.cpp:56 #: parts/documentation/find_documentation_options.cpp:173 #: parts/doxygen/messages.cpp:135 msgid "Index" msgstr "索引" #: parts/documentation/docconfiglistview.cpp:31 #: parts/documentation/documentation_widget.cpp:62 #: parts/documentation/docutils.cpp:90 #: parts/documentation/find_documentationbase.ui:44 #: parts/doxygen/messages.cpp:276 #, no-c-format msgid "Search" msgstr "搜索" #: parts/documentation/docglobalconfigwidget.cpp:267 msgid "" "This will restore the default settings for the following documentation " "plugins: chm, devhelp, doxygen, kdevtoc, qt.\n" "Any change made to documentation catalogs belonging to those plugins will be " "lost. Changes made to documentation catalogs belonging to the custom plugin " "will be preserved.\n" "Do you wish to continue?" msgstr "" #: parts/documentation/docglobalconfigwidget.cpp:275 #: parts/documentation/documentation_part.cpp:790 #, fuzzy msgid "Rescan documentation" msgstr "清除 API 文档" #: parts/documentation/documentation_part.cpp:89 msgid "Project Documentation" msgstr "工程文档" #: parts/documentation/documentation_part.cpp:100 #, fuzzy msgid "" "Documentation browser

The documentation browser gives access to " "various documentation sources (TQt DCF, Doxygen, KDoc, TDevelopTOC and " "DevHelp documentation) and the TDevelop manuals. It also provides " "documentation index and full text search capabilities." msgstr "" "文档树

文档树使您能够访问各种文档来源 (Qt DCF、Doxygen、KDoc、" "KDevelopTOC 和 DevHelp 文档),它也可以提供文档索引。" #: parts/documentation/documentation_part.cpp:107 msgid "Documentation browser" msgstr "文档浏览器" #: parts/documentation/documentation_part.cpp:194 msgid "Documentation Settings" msgstr "文档设置" #: parts/documentation/documentation_part.cpp:213 msgid "&Search in Documentation..." msgstr "在文档中搜索(&S)..." #: parts/documentation/documentation_part.cpp:216 msgid "Full text search in the documentation" msgstr "在文档里进行全文搜索" #: parts/documentation/documentation_part.cpp:217 #, fuzzy msgid "" "Search in documentation

Opens the Search in documentation tab. It " "allows a search term to be entered which will be searched for in the " "documentation. For this to work, a full text index must be created first, " "which can be done in the configuration dialog of the documentation plugin." msgstr "" "全文搜索

在文档对话框中打开搜索,您可以输入术语在文档里进行查找。要" "使它正常工作,您必须先在文档树的配置对话框里创建全文索引。" #: parts/documentation/documentation_part.cpp:224 #, fuzzy msgid "&Look in Documentation Index..." msgstr "文档索引" #: parts/documentation/documentation_part.cpp:227 #, fuzzy msgid "Look in the documentation index" msgstr "文档索引" #: parts/documentation/documentation_part.cpp:228 #: parts/documentation/documentation_part.cpp:480 msgid "" "Look in documentation index

Opens the documentation index tab. It " "allows a term to be entered which will be looked for in the documentation " "index." msgstr "" #: parts/documentation/documentation_part.cpp:233 msgid "Man Page..." msgstr "手册页..." #: parts/documentation/documentation_part.cpp:236 msgid "Show a manpage" msgstr "显示手册页..." #: parts/documentation/documentation_part.cpp:237 msgid "Show a manpage

Opens a man page using embedded viewer." msgstr "显示手册页

用内嵌的浏览器打开手册页。" #: parts/documentation/documentation_part.cpp:239 msgid "Info Page..." msgstr "信息页..." #: parts/documentation/documentation_part.cpp:242 #, fuzzy msgid "Show an infopage" msgstr "显示手册页..." #: parts/documentation/documentation_part.cpp:243 #, fuzzy msgid "Show an infopage

Opens an info page using embedded viewer." msgstr "显示手册页

用内嵌的浏览器打开手册页。" #: parts/documentation/documentation_part.cpp:245 #, fuzzy msgid "Find Documentation..." msgstr "查找文档" #: parts/documentation/documentation_part.cpp:248 #: parts/documentation/find_documentationbase.ui:25 #, no-c-format msgid "Find Documentation" msgstr "查找文档" #: parts/documentation/documentation_part.cpp:249 #: parts/documentation/documentation_part.cpp:471 msgid "" "Find documentation

Opens the documentation finder tab and searches " "all possible sources of documentation like table of contents, index, man and " "info databases, Google, etc." msgstr "" #: parts/documentation/documentation_part.cpp:319 #, fuzzy msgid "Show Manual Page" msgstr "显示手册页..." #: parts/documentation/documentation_part.cpp:319 msgid "Show manpage on:" msgstr "显示手册页:" #: parts/documentation/documentation_part.cpp:343 #, fuzzy msgid "Show Info Page" msgstr "显示手册页..." #: parts/documentation/documentation_part.cpp:343 #, fuzzy msgid "Show infopage on:" msgstr "显示手册页:" #: parts/documentation/documentation_part.cpp:469 #, fuzzy, c-format msgid "Find Documentation: %1" msgstr "在文档中搜索:%1" #: parts/documentation/documentation_part.cpp:478 #, fuzzy, c-format msgid "Look in Documentation Index: %1" msgstr "文档索引" #: parts/documentation/documentation_part.cpp:486 #, c-format msgid "Search in Documentation: %1" msgstr "在文档中搜索:%1" #: parts/documentation/documentation_part.cpp:488 #, fuzzy msgid "" "Search in documentation

Searches for a term under the cursor in the " "documentation. For this to work, a full text index must be created first, " "which can be done in the configuration dialog of the documentation plugin." msgstr "" "在文档中搜索

在文档中搜索当前光标下的术语。要使它正常工作,您必须先" "在文档树的配置对话框里创建全文索引。" #: parts/documentation/documentation_part.cpp:495 #, c-format msgid "Goto Manpage: %1" msgstr "转至手册页:%1" #: parts/documentation/documentation_part.cpp:497 msgid "" "Goto manpage

Tries to open a man page for the term under the cursor." msgstr "转至手册页

它将试图打开当前光标下的术语的手册页。" #: parts/documentation/documentation_part.cpp:500 #, fuzzy, c-format msgid "Goto Infopage: %1" msgstr "转至手册页:%1" #: parts/documentation/documentation_part.cpp:502 #, fuzzy msgid "" "Goto infopage

Tries to open an info page for the term under the " "cursor." msgstr "转至手册页

它将试图打开当前光标下的术语的手册页。" #: parts/documentation/documentation_widget.cpp:59 msgid "Finder" msgstr "Finder" #: parts/documentation/docutils.cpp:80 msgid "Open in Current Tab" msgstr "" #: parts/documentation/docutils.cpp:85 msgid "Bookmark This Location" msgstr "" #: parts/documentation/find_documentation_options.cpp:168 msgid "Info" msgstr "" #: parts/documentation/find_documentation_options.cpp:178 msgid "Google" msgstr "Google" #: parts/documentation/indexview.cpp:48 msgid "&Look for:" msgstr "查找(&L):" #: parts/documentation/docprojectconfigwidgetbase.ui:41 #: parts/documentation/interfaces/kdevdocumentationplugin.cpp:720 #, no-c-format msgid "Project API Documentation" msgstr "工程 API 文档" #: parts/documentation/docprojectconfigwidgetbase.ui:103 #: parts/documentation/interfaces/kdevdocumentationplugin.cpp:721 #, no-c-format msgid "Project User Manual" msgstr "工程用户手册" #: parts/documentation/plugins/chm/docchmplugin.cpp:74 #, fuzzy msgid "CHM Documentation Collection" msgstr "Qt 文档集" #: parts/documentation/plugins/custom/doccustomplugin.cpp:55 #, fuzzy msgid "Custom Documentation Collection" msgstr "Qt 文档集" #: parts/documentation/plugins/devhelp/docdevhelpplugin.cpp:120 #, fuzzy msgid "Devhelp Documentation Collection" msgstr "DevHelp 文档集" #: parts/documentation/plugins/djvu/docdjvuplugin.cpp:30 #, fuzzy msgid "Djvu documentation plugin" msgstr "Qt 文档集" #: parts/documentation/plugins/djvu/docdjvuplugin.cpp:52 #, fuzzy msgid "Djvu Documentation Collection" msgstr "KDoc 文档集" #: parts/documentation/plugins/doxygen/docdoxygenplugin.cpp:126 msgid "Doxygen Documentation Collection" msgstr "Doxygen 文档集" #: parts/documentation/plugins/doxygen/docdoxygenplugin.cpp:461 msgid "%1 Class Reference" msgstr "" #: parts/documentation/plugins/doxygen/docdoxygenplugin.cpp:478 msgid "%1::%2%3 Member Reference" msgstr "" #: parts/documentation/plugins/kdevtoc/dockdevtocplugin.cpp:80 #, fuzzy msgid "TDevelopTOC Documentation Collection" msgstr "KDevelopTOC 文档集" #: parts/documentation/plugins/pdb/docpdbplugin.cpp:30 #, fuzzy msgid "PalmDoc documentation plugin" msgstr "Qt 文档集" #: parts/documentation/plugins/pdb/docpdbplugin.cpp:52 #, fuzzy msgid "PalmDoc Documentation Collection" msgstr "KDoc 文档集" #: parts/documentation/plugins/pdf/docpdfplugin.cpp:30 #, fuzzy msgid "PDF documentation plugin" msgstr "Qt 文档集" #: parts/documentation/plugins/pdf/docpdfplugin.cpp:52 #, fuzzy msgid "PDF Documentation Collection" msgstr "KDoc 文档集" #: parts/documentation/plugins/qt/docqtplugin.cpp:205 #, fuzzy msgid "TQt Documentation Collection" msgstr "Qt 文档集" #: parts/documentation/protocols/chm/kchmpart.cpp:62 msgid "KChm" msgstr "KChm" #: parts/documentation/searchview.cpp:58 msgid "Wor&ds to search:" msgstr "要搜索的词(&D):" #: parts/documentation/searchview.cpp:63 msgid "Se&arch" msgstr "搜索(&A)" #: parts/documentation/searchview.cpp:69 msgid "and" msgstr "和" #: parts/documentation/searchview.cpp:70 msgid "or" msgstr "或" #: parts/documentation/searchview.cpp:71 msgid "&Method:" msgstr "方法(&M):" #: parts/documentation/searchview.cpp:73 msgid "Score" msgstr "评分" #: parts/documentation/searchview.cpp:75 vcs/cvsservice/editorsdialog.cpp:88 #: vcs/cvsservice/editorsdialog.cpp:101 vcs/subversion/svn_blamewidget.cpp:37 #: vcs/subversion/svn_logviewwidget.cpp:52 msgid "Date" msgstr "日期" #: parts/documentation/searchview.cpp:76 msgid "S&ort by:" msgstr "排序依据(&O):" #: parts/documentation/searchview.cpp:84 msgid "Search &results:" msgstr "搜索结果(&R):" #: parts/documentation/searchview.cpp:89 msgid "Update Config" msgstr "更新配置" #: parts/documentation/searchview.cpp:90 msgid "Update Index" msgstr "更新索引" #: parts/documentation/searchview.cpp:98 #, fuzzy msgid "Relevance" msgstr "发布版本号" #: parts/documentation/searchview.cpp:148 msgid "Full text search has to be set up before usage." msgstr "" #: parts/documentation/searchview.cpp:151 msgid "" "Now the full text search database will be created.\n" "Wait for database creation to finish and then repeat search." msgstr "" #: parts/documentation/searchview.cpp:158 msgid "" "Cannot find the htsearch executable.\n" "It is part of the ht://Dig package that is used by TDevelop to perform full " "text search. Please install ht://Dig and use Documentation page in Configure " "TDevelop dialog to set the htsearch location." msgstr "" #: parts/documentation/searchview.cpp:174 #, fuzzy msgid "Cannot find the htdig configuration file." msgstr "不读取默认配置文件" #: parts/documentation/searchview.cpp:207 #, fuzzy msgid "Cannot start the htsearch executable." msgstr "无法运行 htsearch 可执行文件!" #: parts/documentation/tools/htdig/htdigindex.cpp:43 msgid "Generating Search Index" msgstr "生成搜索索引" #: parts/documentation/tools/htdig/htdigindex.cpp:63 msgid "Scanning for files" msgstr "正在扫描文件" #: parts/documentation/tools/htdig/htdigindex.cpp:73 msgid "Extracting search terms" msgstr "正在提取搜索项目" #: parts/documentation/tools/htdig/htdigindex.cpp:82 msgid "Generating index..." msgstr "正在生成索引..." #: parts/documentation/tools/htdig/htdigindex.cpp:125 #, c-format msgid "Files processed: %1" msgstr "已处理的文件:%1" #: parts/documentation/tools/htdig/htdigindex.cpp:350 msgid "Running htdig failed" msgstr "运行 htdig 失败" #: parts/documentation/tools/htdig/htdigindex.cpp:411 msgid "Running htmerge failed" msgstr "运行 htmerge 失败" #: parts/documentation/tools/htdig/htdigindex.cpp:448 #, fuzzy msgid "Update user's htdig configuration file only" msgstr "编译器配置文件:" #: parts/documentation/tools/htdig/htdigindex.cpp:449 #, fuzzy msgid "-c and generate index" msgstr "正在生成索引..." #: parts/documentation/tools/htdig/htdigindex.cpp:453 msgid "TDevelop ht://Dig Indexer" msgstr "" #: parts/documentation/tools/htdig/htdigindex.cpp:454 #, fuzzy msgid "TDE Index generator for documentation files." msgstr "TDE 帮助文件索引生成器" #: parts/documentation/tools/htdig/htdigindex.cpp:470 #, fuzzy msgid "Configuration file updated." msgstr "编译器配置文件:" #: parts/documentation/tools/htdig/htdigindex.cpp:472 #, fuzzy msgid "Configuration file update failed." msgstr "编译器配置文件:" #: parts/doxygen/doxygenconfigwidget.cpp:258 parts/doxygen/doxygenpart.cpp:205 msgid "Cannot write Doxyfile." msgstr "无法写入 Doxyfile。" #: parts/doxygen/doxygenpart.cpp:61 msgid "Build API Documentation" msgstr "构建 API 文档" #: parts/doxygen/doxygenpart.cpp:64 msgid "Build API documentation" msgstr "构建 API 文档" #: parts/doxygen/doxygenpart.cpp:65 msgid "" "Build API documentation

Runs doxygen on a project Doxyfile to " "generate API documentation. If the search engine is enabled in Doxyfile, " "this also runs doxytag to create it." msgstr "" "构建 API 文档

用工程的 Doxyfile 文件运行 doxygen,生成 API 文档。如" "果 Doxyfile 文件启用搜索引擎,则将运行 doxytag 创建它。" #: parts/doxygen/doxygenpart.cpp:68 msgid "Clean API Documentation" msgstr "清除 API 文档" #: parts/doxygen/doxygenpart.cpp:71 msgid "Clean API documentation" msgstr "清除 API 文档" #: parts/doxygen/doxygenpart.cpp:72 msgid "" "Clean API documentation

Removes all generated by doxygen files." msgstr "清除 API 文档

删除所有doxygen 生成的文件。" #: parts/doxygen/doxygenpart.cpp:77 msgid "Doxygen" msgstr "Doxygen" #: parts/doxygen/doxygenpart.cpp:81 msgid "Document Current Function" msgstr "给当前函数编文档" #: parts/doxygen/doxygenpart.cpp:82 #, fuzzy msgid "Create a documentation template above a function" msgstr "显示 Perl 函数的文档页" #: parts/doxygen/doxygenpart.cpp:83 msgid "" "Document Current Function

Creates a documentation template " "according to a function's signature above a function definition/declaration." msgstr "" #: parts/doxygen/doxygenpart.cpp:87 msgid "Preview Doxygen Output" msgstr "" #: parts/doxygen/doxygenpart.cpp:88 msgid "Show a preview of the Doxygen output of this file" msgstr "" #: parts/doxygen/doxygenpart.cpp:89 msgid "" "Preview Doxygen output

Runs Doxygen over the current file and shows " "the created index.html." msgstr "" #: parts/doxygen/doxygenpart.cpp:370 msgid "Another process is still running. Please wait until it's finished." msgstr "" #: parts/doxygen/doxygenpart.cpp:451 #, fuzzy msgid "Cannot create temporary file '%1'" msgstr "无法创建标记文件" #: parts/doxygen/input.cpp:223 parts/doxygen/input.cpp:366 msgid "Browse to a file" msgstr "浏览一个文件" #: parts/doxygen/input.cpp:223 parts/doxygen/input.cpp:372 msgid "Browse to a folder" msgstr "浏览一个文件夹" #: parts/doxygen/input.cpp:341 msgid "Add item" msgstr "添加项目" #: parts/doxygen/input.cpp:346 msgid "Delete selected item" msgstr "删除选中的项目" #: parts/doxygen/input.cpp:351 msgid "Update selected item" msgstr "更新选中的项目" #: parts/doxygen/messages.cpp:29 src/profileengine/editor/profileeditor.cpp:141 msgid "Project" msgstr "工程" #: parts/doxygen/messages.cpp:30 msgid "Project name" msgstr "工程名称" #: parts/doxygen/messages.cpp:31 msgid "Project version" msgstr "工程版本" #: parts/doxygen/messages.cpp:32 msgid "Output path" msgstr "输出路径" #: parts/doxygen/messages.cpp:33 msgid "Distribute the generated docs in 10 subdirectories" msgstr "" #: parts/doxygen/messages.cpp:34 msgid "Output language" msgstr "输出语言" #: parts/doxygen/messages.cpp:35 msgid "Use MS Windows(tm) font encoding" msgstr "使用微软视窗(tm)字体编码" #: parts/doxygen/messages.cpp:36 msgid "Include brief member descriptions" msgstr "包含简短的成员描述" #: parts/doxygen/messages.cpp:37 msgid "Repeat brief member descriptions" msgstr "重复简短的成员描述" #: parts/doxygen/messages.cpp:38 #, fuzzy msgid "Strip words in brief description" msgstr "使用 JavaDoc 风格的简短描述" #: parts/doxygen/messages.cpp:39 msgid "Always include detailed section" msgstr "总是包含详细的章节" #: parts/doxygen/messages.cpp:40 msgid "Inline inherited members" msgstr "内联继承的成员" #: parts/doxygen/messages.cpp:41 msgid "Always use full path names" msgstr "总是使用完整路径名" #: parts/doxygen/messages.cpp:42 msgid "Prefix to strip from path names" msgstr "要从路径名中剥去的前缀" #: parts/doxygen/messages.cpp:43 #, fuzzy msgid "Strip from include path" msgstr "包含文件目录" #: parts/doxygen/messages.cpp:44 msgid "Generate short file names" msgstr "生成短文件名" #: parts/doxygen/messages.cpp:45 msgid "Use JavaDoc-style brief descriptions" msgstr "使用 JavaDoc 风格的简短描述" #: parts/doxygen/messages.cpp:46 msgid "Multiline cpp is brief" msgstr "" #: parts/doxygen/messages.cpp:47 msgid "Details at top" msgstr "细节置于顶部" #: parts/doxygen/messages.cpp:48 msgid "Inherit documentation" msgstr "继承文档" #: parts/doxygen/messages.cpp:49 msgid "Produce a new page for each member" msgstr "" #: parts/doxygen/messages.cpp:50 msgid "Tab size" msgstr "制表符宽度" #: parts/doxygen/messages.cpp:51 msgid "Aliases" msgstr "别名" #: parts/doxygen/messages.cpp:52 msgid "Optimize output for C" msgstr "为 C 优化输出" #: parts/doxygen/messages.cpp:53 msgid "Optimize output for Java" msgstr "为 Java 优化输出" #: parts/doxygen/messages.cpp:54 msgid "Use built-in STL classes support" msgstr "" #: parts/doxygen/messages.cpp:55 msgid "Use group documentation on undocumented members" msgstr "没有文档的成员使用组文档" #: parts/doxygen/messages.cpp:56 msgid "Class members type subgrouping" msgstr "类成员类型分组" #: parts/doxygen/messages.cpp:62 msgid "Extract undocumented entities" msgstr "提取没有文档的实体" #: parts/doxygen/messages.cpp:63 msgid "Extract private entities" msgstr "提取私有实体" #: parts/doxygen/messages.cpp:64 #, fuzzy msgid "Extract static entities" msgstr "提取静态实体" #: parts/doxygen/messages.cpp:65 msgid "Extract local classes" msgstr "提取局部类" #: parts/doxygen/messages.cpp:66 #, fuzzy msgid "Extract local methods" msgstr "提取局部类" #: parts/doxygen/messages.cpp:67 msgid "Hide undocumented members" msgstr "隐藏没有文档的成员" #: parts/doxygen/messages.cpp:68 msgid "Hide undocumented classes" msgstr "隐藏没有文档的类" #: parts/doxygen/messages.cpp:69 msgid "Hide friend compounds" msgstr "隐藏友元组合" #: parts/doxygen/messages.cpp:70 msgid "Hide in body docs" msgstr "隐藏在文档主体" #: parts/doxygen/messages.cpp:71 msgid "Document internal entities" msgstr "为内部实体提供文档" #: parts/doxygen/messages.cpp:72 msgid "Use case-sensitive file names" msgstr "使用区分大小写的文件名" #: parts/doxygen/messages.cpp:73 msgid "Hide name scopes" msgstr "隐藏名字作用域" #: parts/doxygen/messages.cpp:74 msgid "Show included files" msgstr "显示包含的文件" #: parts/doxygen/messages.cpp:75 msgid "Make inline functions" msgstr "制作内联函数" #: parts/doxygen/messages.cpp:76 msgid "Sort member documentation alphabetically" msgstr "将成员文档案字母顺序排列" #: parts/doxygen/messages.cpp:77 msgid "Sort the class list by fully-qualified names" msgstr "" #: parts/doxygen/messages.cpp:78 #, fuzzy msgid "Sort brief documentation alphabetically" msgstr "将成员文档案字母顺序排列" #: parts/doxygen/messages.cpp:79 msgid "Enable conditional sections" msgstr "启用条件章节" #: parts/doxygen/messages.cpp:80 msgid "Generate TODO-list" msgstr "生成 TODO 列表" #: parts/doxygen/messages.cpp:81 msgid "Generate Test-list" msgstr "生成测试列表" #: parts/doxygen/messages.cpp:82 msgid "Generate Bug-list" msgstr "生成错误列表" #: parts/doxygen/messages.cpp:83 msgid "Generate Deprecated-list" msgstr "生成过时用法列表" #: parts/doxygen/messages.cpp:84 msgid "Maximum lines shown for initializers" msgstr "初始化值的最大行数" #: parts/doxygen/messages.cpp:85 msgid "Show used files" msgstr "显示使用的文件" #: parts/doxygen/messages.cpp:86 msgid "Show the directory hierarchy" msgstr "" #: parts/doxygen/messages.cpp:87 msgid "Script to invoke to get the current version for each file" msgstr "" #: parts/doxygen/messages.cpp:93 msgid "Suppress output" msgstr "抑制输出" #: parts/doxygen/messages.cpp:94 msgid "Show warnings" msgstr "显示警告" #: parts/doxygen/messages.cpp:95 #, fuzzy msgid "Warn about undocumented entities" msgstr "对没有文档的实体给出警告" #: parts/doxygen/messages.cpp:96 msgid "Warn if error in documents" msgstr "对文档中的错误给出警告" #: parts/doxygen/messages.cpp:97 #, fuzzy msgid "Warn if function parameters are not documented" msgstr "对文档中的错误给出警告" #: parts/doxygen/messages.cpp:98 msgid "Warnings format" msgstr "警告格式" #: parts/doxygen/messages.cpp:99 msgid "Write warnings to" msgstr "警告写入到" #: parts/doxygen/messages.cpp:104 msgid "Input" msgstr "输入" #: parts/doxygen/messages.cpp:105 msgid "Input files and directories" msgstr "输入文件和目录" #: parts/doxygen/messages.cpp:106 msgid "Input patterns" msgstr "输入模板" #: parts/doxygen/messages.cpp:107 msgid "Recurse into subdirectories" msgstr "递归查找子目录" #: parts/doxygen/messages.cpp:108 msgid "Exclude from input" msgstr "排除在输入之外" #: parts/doxygen/messages.cpp:109 msgid "Exclude symlinks" msgstr "排除符号链接" #: parts/doxygen/messages.cpp:110 msgid "Exclude patterns" msgstr "排除模板" #: parts/doxygen/messages.cpp:111 msgid "Path to examples" msgstr "到例子的路径" #: parts/doxygen/messages.cpp:112 msgid "Example patterns" msgstr "示例模板" #: parts/doxygen/messages.cpp:113 msgid "Example recursive" msgstr "示例递归" #: parts/doxygen/messages.cpp:114 msgid "Path to images" msgstr "到图片的路径" #: parts/doxygen/messages.cpp:115 msgid "Input filter" msgstr "输入过滤器" #: parts/doxygen/messages.cpp:116 msgid "Filter input files" msgstr "过滤输入文件" #: parts/doxygen/messages.cpp:117 #, fuzzy msgid "Apply filters on file patterns" msgstr "包含文件模板" #: parts/doxygen/messages.cpp:122 msgid "Source Browser" msgstr "源代码浏览器" #: parts/doxygen/messages.cpp:123 msgid "Cross-reference with source files" msgstr "和源文件进行交叉索引" #: parts/doxygen/messages.cpp:124 #, fuzzy msgid "References will link to source code" msgstr "和源文件进行交叉索引" #: parts/doxygen/messages.cpp:125 msgid "Use links to HTAGS" msgstr "" #: parts/doxygen/messages.cpp:126 msgid "Inline sources" msgstr "内嵌源代码" #: parts/doxygen/messages.cpp:127 msgid "Hide special comment blocks" msgstr "隐藏特殊的注释块" #: parts/doxygen/messages.cpp:128 #, fuzzy msgid "Referenced by relation" msgstr "被关系所引用" #: parts/doxygen/messages.cpp:129 #, fuzzy msgid "References relation" msgstr "参照关系" #: parts/doxygen/messages.cpp:130 msgid "Include headers verbatim" msgstr "包括详细的文件头" #: parts/doxygen/messages.cpp:136 msgid "Generate alphabetical index" msgstr "生成字母顺序索引" #: parts/doxygen/messages.cpp:137 msgid "Columns in index" msgstr "索引的列数" #: parts/doxygen/messages.cpp:138 msgid "Prefix to ignore" msgstr "要忽略的前缀" #: parts/doxygen/messages.cpp:143 msgid "HTML" msgstr "HTML" #: parts/doxygen/messages.cpp:144 msgid "Generate HTML" msgstr "生成 HTML 格式" #: parts/doxygen/messages.cpp:145 msgid "HTML output directory" msgstr "HTML 输出目录" #: parts/doxygen/messages.cpp:146 msgid "HTML file extension" msgstr "HTML 文件扩展" #: parts/doxygen/messages.cpp:147 msgid "Header file" msgstr "HTML 头文件" #: parts/doxygen/messages.cpp:148 msgid "Footer file" msgstr "脚注文件" #: parts/doxygen/messages.cpp:149 parts/doxygen/messages.cpp:187 msgid "Stylesheet" msgstr "样式表单" #: parts/doxygen/messages.cpp:150 msgid "Align members" msgstr "对齐成员" #: parts/doxygen/messages.cpp:151 msgid "Generate HTML-help" msgstr "生成 HTML 帮助" #: parts/doxygen/messages.cpp:152 msgid "CHM file" msgstr "CHM 头文件" #: parts/doxygen/messages.cpp:153 msgid "HHC location" msgstr "HHC 位置" #: parts/doxygen/messages.cpp:154 msgid "Generate .chi file" msgstr "生成 .chi 文件" #: parts/doxygen/messages.cpp:155 msgid "Generate binary TOC" msgstr "生成双列目录" #: parts/doxygen/messages.cpp:156 msgid "Expand TOC" msgstr "展开目录" #: parts/doxygen/messages.cpp:157 msgid "Disable index" msgstr "禁用索引" #: parts/doxygen/messages.cpp:158 msgid "Number of enum values per line" msgstr "每行的枚举数目" #: parts/doxygen/messages.cpp:159 msgid "Generate treeview" msgstr "生成树状格式" #: parts/doxygen/messages.cpp:160 msgid "Treeview width" msgstr "树状宽度" #: parts/doxygen/messages.cpp:165 msgid "LaTeX" msgstr "LaTeX" #: parts/doxygen/messages.cpp:166 msgid "Generate LaTeX" msgstr "生成 LaTeX 格式" #: parts/doxygen/messages.cpp:167 msgid "LaTeX output directory" msgstr "LaTeX 输出目录" #: parts/doxygen/messages.cpp:168 msgid "LaTeX command name" msgstr "LaTeX 命令名称" #: parts/doxygen/messages.cpp:169 msgid "MakeIndex command name" msgstr "MakeIndex 命令名称" #: parts/doxygen/messages.cpp:170 parts/doxygen/messages.cpp:185 msgid "Generate compact output" msgstr "生成紧缩的输出" #: parts/doxygen/messages.cpp:171 msgid "Paper type" msgstr "纸张类型" #: parts/doxygen/messages.cpp:172 msgid "Include extra packages" msgstr "包含额外的程序包" #: parts/doxygen/messages.cpp:173 msgid "LaTeX Header file" msgstr "LaTeX 头文件" #: parts/doxygen/messages.cpp:174 msgid "Generate PDF hyperlinks" msgstr "生成 PDF 超文本链接" #: parts/doxygen/messages.cpp:175 msgid "Use pdflatex" msgstr "使用 pdflatex" #: parts/doxygen/messages.cpp:176 msgid "Use batch mode" msgstr "使用批处理模式" #: parts/doxygen/messages.cpp:177 msgid "Do not include index chapters" msgstr "不包含索引章节" #: parts/doxygen/messages.cpp:182 msgid "RTF" msgstr "RTF" #: parts/doxygen/messages.cpp:183 msgid "Generate RTF" msgstr "生成 RTF 格式" #: parts/doxygen/messages.cpp:184 msgid "RTF output directory" msgstr "RTF 输出目录" #: parts/doxygen/messages.cpp:186 msgid "Generate hyperlinks" msgstr "生成超文本链接" #: parts/doxygen/messages.cpp:188 msgid "Extensions file" msgstr "扩展文件" #: parts/doxygen/messages.cpp:193 msgid "Man" msgstr "手册" #: parts/doxygen/messages.cpp:194 msgid "Generate man pages" msgstr "生成手册页" #: parts/doxygen/messages.cpp:195 msgid "Man output directory" msgstr "手册输出目录" #: parts/doxygen/messages.cpp:196 msgid "Man extension" msgstr "手册扩展" #: parts/doxygen/messages.cpp:197 msgid "Generate links" msgstr "生成链接" #: buildtools/qmake/projectconfigurationdlgbase.ui:621 #: parts/doxygen/messages.cpp:202 #, no-c-format msgid "XML" msgstr "XML" #: parts/doxygen/messages.cpp:203 msgid "Generate XML" msgstr "生成 HTML" #: parts/doxygen/messages.cpp:204 msgid "XML output directory" msgstr "XML 输出目录" #: parts/doxygen/messages.cpp:205 msgid "XML schema" msgstr "XML 方案" #: parts/doxygen/messages.cpp:206 msgid "XML DTD file" msgstr "XML DTD 文件" #: parts/doxygen/messages.cpp:207 msgid "Dump program listings to the XML output" msgstr "" #: parts/doxygen/messages.cpp:212 msgid "DEF" msgstr "DEF" #: parts/doxygen/messages.cpp:213 msgid "Generate Autogen DEF" msgstr "生成 Autogen DEF" #: languages/perl/perlconfigwidgetbase.ui:16 parts/doxygen/messages.cpp:218 #, no-c-format msgid "Perl" msgstr "Perl" #: parts/doxygen/messages.cpp:219 msgid "Generate Perl module" msgstr "生成 Perl 模块" #: parts/doxygen/messages.cpp:220 msgid "Generate PDF and DVI using LaTeX" msgstr "用 LaTeX 生成 PDF 和 DVI 文件" #: parts/doxygen/messages.cpp:221 msgid "Make the Perl module output human readable" msgstr "生成易读的 Perl 模块输出" #: parts/doxygen/messages.cpp:222 msgid "Perl module variable prefix in the makefiles" msgstr "makefiles 中的 Perl 模块变量前缀" #: parts/doxygen/messages.cpp:227 msgid "Preprocessor" msgstr "预处理器" #: parts/doxygen/messages.cpp:228 msgid "Enable preprocessing" msgstr "启用预处理" #: parts/doxygen/messages.cpp:229 msgid "Expand macros" msgstr "展开宏" #: parts/doxygen/messages.cpp:230 msgid "Expand only predefined macros" msgstr "只展开预定义的宏" #: parts/doxygen/messages.cpp:231 msgid "Search for includes" msgstr "搜索包含文件" #: parts/doxygen/messages.cpp:232 msgid "Include path" msgstr "包含文件目录" #: parts/doxygen/messages.cpp:233 msgid "Include file patterns" msgstr "包含文件模板" #: parts/doxygen/messages.cpp:234 msgid "Predefined macros" msgstr "预定义的宏" #: parts/doxygen/messages.cpp:235 msgid "Expand as defined" msgstr "按照定义展开" #: parts/doxygen/messages.cpp:236 msgid "Skip function macros" msgstr "略过函数宏" #: parts/doxygen/messages.cpp:241 msgid "External" msgstr "外部的" #: parts/doxygen/messages.cpp:242 msgid "Tagfiles" msgstr "标记文件" #: parts/doxygen/messages.cpp:243 msgid "Generate tagfile" msgstr "生成标记文件" #: parts/doxygen/messages.cpp:244 msgid "List all externals" msgstr "列出所有外部引用" #: parts/doxygen/messages.cpp:245 msgid "External groups" msgstr "外部分组" #: parts/doxygen/messages.cpp:246 msgid "Path to Perl" msgstr "到 Perl 的路径" #: parts/doxygen/messages.cpp:251 msgid "Dot" msgstr "Dot" #: parts/doxygen/messages.cpp:252 msgid "Generate class diagrams" msgstr "生成类框图" #: parts/doxygen/messages.cpp:253 msgid "Hide undocumented relations" msgstr "隐藏没有文档的关系" #: parts/doxygen/messages.cpp:254 msgid "Use dot" msgstr "使用 dot" #: parts/doxygen/messages.cpp:255 #, fuzzy msgid "Generate a caller dependency graph" msgstr "生成被包含图形" #: parts/doxygen/messages.cpp:256 msgid "Generate class graphs" msgstr "生成类图形" #: parts/doxygen/messages.cpp:257 msgid "Generate collaboration graphs" msgstr "生成关联图形" #: parts/doxygen/messages.cpp:258 msgid "Generate a graph showing the direct groups dependencies" msgstr "" #: parts/doxygen/messages.cpp:259 msgid "Generate UML looking inheritance and colloboration diagrams" msgstr "生成类似 UML 的继承和协作图谱" #: parts/doxygen/messages.cpp:260 msgid "Show relations between templates and their instances" msgstr "显示模板和它们的实例之间的关系" #: parts/doxygen/messages.cpp:261 msgid "Generate include graphs" msgstr "生成包含图形" #: parts/doxygen/messages.cpp:262 msgid "Generate included-by graphs" msgstr "生成被包含图形" #: parts/doxygen/messages.cpp:263 msgid "" "Generate a call dependency graph for every global function or class method" msgstr "为每个全局函数或类方法生成调用依赖关系图" #: parts/doxygen/messages.cpp:264 msgid "Generate graphical hierarchy" msgstr "生成图形层次结构" #: parts/doxygen/messages.cpp:265 msgid "Show the dependencies a directory has on other directories" msgstr "" #: parts/doxygen/messages.cpp:266 msgid "Dot image format" msgstr "Dot 图片格式" #: parts/doxygen/messages.cpp:267 msgid "Path to dot" msgstr "到 dot 的路径" #: parts/doxygen/messages.cpp:268 msgid "Directories with extra dot files" msgstr "含有附加 dot 文件的目录" #: parts/doxygen/messages.cpp:269 msgid "Maximum graph width" msgstr "最大图形宽度" #: parts/doxygen/messages.cpp:270 msgid "Maximum graph height" msgstr "最大图形高度" #: parts/doxygen/messages.cpp:271 msgid "Maximum graph depth" msgstr "最大图形深度" #: parts/doxygen/messages.cpp:272 msgid "Generate images with a transparent background" msgstr "" #: parts/doxygen/messages.cpp:273 msgid "Generate multiple output files in one run" msgstr "" #: parts/doxygen/messages.cpp:274 msgid "Generate legend" msgstr "生成图例" #: parts/doxygen/messages.cpp:275 msgid "Remove intermediate files" msgstr "删除中间文件" #: parts/doxygen/messages.cpp:281 msgid "Search engine" msgstr "搜索引擎" #: parts/doxygen/messages.cpp:282 msgid "CGI name" msgstr "CGI 名称" #: parts/doxygen/messages.cpp:283 msgid "CGI URL" msgstr "CGI URL" #: parts/doxygen/messages.cpp:284 msgid "Documentation URL" msgstr "文档 URL" #: parts/doxygen/messages.cpp:285 msgid "Absolute path to documentation" msgstr "到文档的绝对路径" #: parts/doxygen/messages.cpp:286 msgid "Absolute path to doxysearch binary" msgstr "到 doxysearch 执行文件的绝对路径" #: parts/doxygen/messages.cpp:287 msgid "Paths to external documentation" msgstr "到外部文档的路径" #: parts/filecreate/addglobaldlg.cpp:59 #: parts/filecreate/fcconfigwidgetbase.ui:75 #: parts/filecreate/fcconfigwidgetbase.ui:224 #, no-c-format msgid "Type Extension" msgstr "类型扩展" #: parts/filecreate/addglobaldlg.cpp:60 #: parts/filecreate/fcconfigwidgetbase.ui:86 #: parts/filecreate/fcconfigwidgetbase.ui:235 #, no-c-format msgid "Type Name" msgstr "类型名称" #: parts/filecreate/addglobaldlg.cpp:61 msgid "Template Location" msgstr "模板位置" #: parts/filecreate/addglobaldlg.cpp:62 #: parts/filecreate/fcconfigwidgetbase.ui:97 #: parts/filecreate/fcconfigwidgetbase.ui:246 #, no-c-format msgid "Icon" msgstr "图标" #: parts/abbrev/abbrevconfigwidgetbase.ui:76 #: parts/filecreate/addglobaldlg.cpp:63 #: parts/filecreate/fcconfigwidgetbase.ui:108 #: parts/filecreate/fcconfigwidgetbase.ui:257 src/languageselectwidget.cpp:83 #: src/profileengine/editor/profileeditorbase.ui:97 #, no-c-format msgid "Description" msgstr "描述" #: parts/filecreate/addglobaldlg.cpp:92 msgid "Select Global File Types" msgstr "选择全局文件类型" #: parts/filecreate/addglobaldlg.cpp:94 msgid "F1" msgstr "F1" #: parts/filecreate/addglobaldlg.cpp:99 msgid "Type extension:" msgstr "类型扩展:" #: parts/filecreate/addglobaldlg.cpp:100 msgid "Type name:" msgstr "类型名称:" #: parts/filecreate/addglobaldlg.cpp:101 msgid "Template location:" msgstr "模板位置:" #: parts/filecreate/addglobaldlg.cpp:102 msgid "Icon:" msgstr "图标:" #: parts/appwizard/filepropspagebase.ui:97 #: parts/filecreate/addglobaldlg.cpp:103 src/generalinfowidgetbase.ui:59 #: src/pluginselectdialogbase.ui:74 #, no-c-format msgid "Description:" msgstr "描述:" #: parts/filecreate/fcconfigwidget.cpp:51 msgid "Global Types" msgstr "全局类型" #: parts/filecreate/fcconfigwidget.cpp:62 msgid "Project templates in " msgstr "工程模板位于" #: parts/filecreate/fcconfigwidget.cpp:652 msgid "" "Requested template does not exist yet.\n" "It will be opened immediately after accepting the configuration dialog." msgstr "" "所请求的模板尚不存在。\n" "它将在配置对话框被接受后立即打开。" #: parts/filecreate/fcconfigwidget.cpp:677 #: parts/filecreate/fcconfigwidget.cpp:700 msgid "" "Template for the selected file type does not exist yet.\n" "It will be opened immediately after accepting the configuration dialog." msgstr "" "所选择的文件类型的模板尚不存在。\n" "它将在配置对话框被接受后立即打开。" #: parts/filecreate/fcconfigwidget.cpp:679 #: parts/filecreate/fcconfigwidget.cpp:702 msgid "" "Template for the selected file type has been changed.\n" "It will be opened immediately after accepting the configuration dialog." msgstr "" "所选择的文件类型的模板已被改变。\n" "它将在配置对话框被接受后立即打开。" #: parts/filecreate/filecreate_newfile.cpp:33 msgid "" "_: New file dialog (title)\n" "New File" msgstr "新建文件" #: parts/filecreate/filecreate_newfile.cpp:38 #, fuzzy msgid "New File Creation" msgstr "新文件创建" #: languages/php/phpnewclassdlgbase.ui:106 parts/appwizard/importdlgbase.ui:27 #: parts/filecreate/filecreate_newfile.cpp:41 parts/grepview/grepdlg.cpp:132 #, no-c-format msgid "&Directory:" msgstr "目录(&D):" #: parts/filecreate/filecreate_newfile.cpp:56 msgid "" "_: Add to project (on checkbox)\n" "&Add to project" msgstr "添加到工程中(&A)" #: parts/filecreate/filecreate_newfile.cpp:155 #, fuzzy msgid "A file with this name already exists" msgstr "这个名字的文件已经存在。" #: parts/filecreate/filecreate_newfile.cpp:155 msgid "File Exists" msgstr "文件已存在" #: parts/filecreate/filecreate_part.cpp:75 #: parts/filecreate/filecreate_part.cpp:76 msgid "File Templates" msgstr "文件模板" #: kdevdesigner/designer/connectiondialog.ui:58 #: parts/filecreate/filecreate_part.cpp:81 #, no-c-format msgid "&New" msgstr "新建(&N)" #: parts/filecreate/filecreate_part.cpp:82 msgid "" "New file

Creates a new file. Also adds it the project if the Add " "to project checkbox is turned on." msgstr "" "新建文件

创建新的文件,如果添加到工程选项被选中,则将它添加到" "工程中。" #: parts/filecreate/filecreate_part.cpp:184 #: parts/fileselector/fileselector_part.cpp:99 msgid "Cannot create file. Check whether the directory and filename are valid." msgstr "" #: parts/filecreate/filecreate_widget2.cpp:48 msgid "Use this to create new files within your project." msgstr "可用它在您的工程里创建新文件。" #: parts/filecreate/filecreate_widget3.cpp:36 msgid "File Create" msgstr "文件创建" #: parts/filecreate/filecreate_widget3.cpp:44 #, fuzzy msgid "" "New file

This part makes the creation of new files easier. Select a " "type in the list to create a file. The list of project file types can be " "configured in project settings dialog, New File Wizard tab. Globally " "available file types are listed and can be configured in TDevelop settings " "dialog, New File Wizard tab." msgstr "" "新建文件

它使创建新文件更加容易。请从列表中选择要创建的文件类型。工" "程文件类型列表可以在工程设置对话框的新建文件向导中进行配置。全局可用的" "文件类型在 KDevelop 设置对话框的新建文件向导中列出,并可进行配置。" #: parts/filelist/filelist_widget.cpp:95 #, fuzzy msgid "This file has unsaved changes." msgstr "这个文件在目标中已经存在。" #: parts/filelist/filelist_widget.cpp:98 msgid "This file has changed on disk since it was last saved." msgstr "" #: parts/filelist/filelist_widget.cpp:101 #, fuzzy msgid "Conflict: this file has changed on disk and has unsaved changes." msgstr "这个文件在目标中已经存在。" #: parts/filelist/filelist_widget.cpp:228 #: parts/filelist/projectviewconfigbase.ui:16 #: parts/filelist/projectviewpart.cpp:79 parts/filelist/projectviewpart.cpp:80 #: parts/filelist/projectviewpart.cpp:251 #: parts/filelist/projectviewpart.cpp:265 #: parts/filelist/projectviewpart.cpp:270 #, no-c-format msgid "File List" msgstr "文件列表" #: parts/filelist/filelist_widget.cpp:229 msgid "Close Selected" msgstr "关闭选中文件" #: parts/filelist/filelist_widget.cpp:230 msgid "Save Selected" msgstr "保存选中文件" #: parts/filelist/filelist_widget.cpp:231 msgid "Reload Selected" msgstr "刷新选中文件" #: parts/filelist/projectviewpart.cpp:260 msgid "" "View Session Toolbar

This allows to create and work with view " "sessions. A view session is a set of open documents.

" msgstr "" #: parts/filelist/projectviewpart.cpp:266 #, fuzzy msgid "File List

This is the list of opened files.

" msgstr "全部关闭

关闭所有文件。" #: parts/filelist/projectviewpart.cpp:270 msgid "Open files" msgstr "打开文件" #: parts/filelist/projectviewpart.cpp:278 #, fuzzy msgid "Open Session..." msgstr "打开方式..." #: parts/filelist/projectviewpart.cpp:282 #, fuzzy msgid "Open Session" msgstr "会话" #: parts/filelist/projectviewpart.cpp:284 #, fuzzy msgid "Save Session" msgstr "会话" #: parts/filelist/projectviewpart.cpp:286 #, fuzzy msgid "New Session..." msgstr "新建类..." #: parts/filelist/projectviewpart.cpp:288 #: parts/filelist/projectviewpart.cpp:292 #: parts/filelist/projectviewpart.cpp:294 #: parts/filelist/projectviewpart.cpp:296 #, fuzzy msgid "Delete Session" msgstr "删除动作" #: parts/filelist/projectviewpart.cpp:487 #, fuzzy msgid "Save View Session As" msgstr "子工程选项" #: parts/filelist/projectviewpart.cpp:487 #, fuzzy msgid "Enter the name of the session:" msgstr "在这里输入项目名。" #: parts/filelist/projectviewpart.cpp:494 #, fuzzy msgid "" "A view session named %1 already exists.
Do you want to " "overwrite it?
" msgstr "子目录 %1 已经存在。您要把它作为子工程添加吗?" #: parts/filelist/projectviewpart.cpp:494 src/partcontroller.cpp:1124 msgid "Overwrite" msgstr "覆盖" #: parts/fileselector/fileselector_part.cpp:50 #: parts/fileselector/fileselector_part.cpp:52 #: parts/fileselector/fileselector_part.cpp:85 msgid "File Selector" msgstr "文件选择器" #: parts/fileselector/fileselector_part.cpp:52 msgid "File selector" msgstr "文件选择器" #: parts/fileselector/fileselector_part.cpp:53 msgid "" "File selector

This file selector lists directory contents and " "provides some file management functions." msgstr "文件选择器

文件选择器列出目录内容并提供一些文件管理功能。" #: parts/fileselector/fileselector_widget.cpp:188 msgid "Current Document Directory" msgstr "当前文档目录" #: parts/fileselector/fileselector_widget.cpp:217 msgid "" "

Here you can enter a path for a directory to display.

To go to a " "directory previously entered, press the arrow on the right and choose one. " "

The entry has directory completion. Right-click to choose how completion " "should behave." msgstr "" "

在此您可以输入要显示的目录路径。

点击右侧的箭头,可以选择以前输入的目" "录。

此输入具有目录补全功能,右键单击可以选择如何进行补全。" #: parts/fileselector/fileselector_widget.cpp:223 msgid "" "

Here you can enter a name filter to limit which files are displayed.

To " "clear the filter, toggle off the filter button to the left.

To reapply the " "last filter used, toggle on the filter button." msgstr "" "

在此您可以输入名字过滤器,限制要显示的文件。

关闭左侧的过滤器按钮可以清" "除过滤器。

启用过滤器按钮可以再次应用上次的过滤器。" #: parts/fileselector/fileselector_widget.cpp:228 #: parts/fileview/partwidget.cpp:75 msgid "" "

This button clears the name filter when toggled off, or reapplies the " "last filter used when toggled on." msgstr "

关闭这个按钮可以清除名字过滤器,启用它可以再次应用上次的过滤器。" #: parts/fileselector/fileselector_widget.cpp:355 #: parts/fileview/partwidget.cpp:104 msgid "Apply last filter (\"%1\")" msgstr "应用上次的过滤器(“%1”)" #: parts/fileselector/fileselector_widget.cpp:366 #: parts/fileview/partwidget.cpp:109 parts/outputviews/appoutputwidget.cpp:265 msgid "Clear filter" msgstr "清除过滤器" #: parts/fileselector/fileselector_widget.cpp:588 msgid "Toolbar" msgstr "工具栏" #: parts/fileselector/fileselector_widget.cpp:590 msgid "A&vailable actions:" msgstr "可用的动作(&V):" #: parts/fileselector/fileselector_widget.cpp:591 msgid "S&elected actions:" msgstr "所选择的动作(&E):" #: parts/fileselector/fileselector_widget.cpp:599 msgid "Auto Synchronization" msgstr "自动同步" #: parts/fileselector/fileselector_widget.cpp:600 msgid "When a docu&ment becomes active" msgstr "当文档激活时(&M)" #: parts/fileselector/fileselector_widget.cpp:601 msgid "When a document is o&pened" msgstr "当文档打开时(&P)" #: parts/fileselector/fileselector_widget.cpp:602 msgid "When the file selector becomes visible" msgstr "当文件选择器出现时" #: parts/fileselector/fileselector_widget.cpp:610 msgid "Remember &locations:" msgstr "记住位置(&L):" #: parts/fileselector/fileselector_widget.cpp:617 msgid "Remember &filters:" msgstr "记住过滤器(&L):" #: parts/fileselector/fileselector_widget.cpp:624 msgid "Session" msgstr "会话" #: parts/fileselector/fileselector_widget.cpp:625 msgid "Restore loca&tion" msgstr "恢复位置(&T)" #: parts/fileselector/fileselector_widget.cpp:626 msgid "Restore last f&ilter" msgstr "恢复上次的过滤器(&I)" #: parts/fileselector/fileselector_widget.cpp:646 msgid "" "

Decides how many locations to keep in the history of the location combo " "box" msgstr "

确定在位置组合框历史中保留多少位置项目" #: parts/fileselector/fileselector_widget.cpp:653 msgid "" "

Decides how many filters to keep in the history of the filter combo box" msgstr "

确定在过滤器组合框历史中保留多少过滤器" #: parts/fileselector/fileselector_widget.cpp:660 msgid "" "

These options allow you to have the File Selector automatically change " "location to the directory of the active document on certain events.

Auto " "synchronization is lazy, meaning it will not take effect until the " "file selector is visible.

None of these are enabled by default, but you " "can always sync the location by pressing the sync button in the toolbar." msgstr "" "

这些选项能在特定事件发生时将文件选择器自动改变到激活的文档所在的目录。

" "自动同步具有惰性,就是说它只有在文件选择器成为可见时才会起作用。

" "这些功能默认都未被启用,但您随时可以点击工具栏上的同步按钮进行同步。" #: parts/fileselector/fileselector_widget.cpp:671 msgid "" "

If this option is enabled (default), the location will be restored when " "you start KDev.

Note that if the session is handled by " "the TDE session manager, the location is always restored." msgstr "" "

如果启用此选项(默认),当您启动 KDevelop 时目录位置将自动恢复。

" "注意如果会话时由 TDE 会话管理器处理的,目录位置将总是被恢复。" #: parts/fileselector/fileselector_widget.cpp:676 msgid "" "

If this option is enabled (default), the current filter will be restored " "when you start KDev.

Note that if the session is handled " "by the TDE session manager, the filter is always restored.

Note that some of the autosync settings may override the restored " "location if on." msgstr "" "

如果启用此选项(默认),当您启动 KDevelop 时当前过滤器将自动恢复。" "

注意如果会话时由 TDE 会话管理器处理的,当前过滤器将总是被" "恢复。

Note有些自动同步设置如果启用的话会取代恢复的目录位" "置。" #: parts/fileselector/tdeactionselector.cpp:70 msgid "&Available:" msgstr "可用的(&A):" #: parts/fileselector/tdeactionselector.cpp:85 msgid "&Selected:" msgstr "所选择的(&S):" #: parts/documentation/addcatalogdlgbase.ui:87 #: parts/documentation/editcatalogdlgbase.ui:141 #: parts/fileview/addfilegroupdlg.cpp:26 #, no-c-format msgid "&Title:" msgstr "标题(&T):" #: parts/fileview/addfilegroupdlg.cpp:32 parts/grepview/grepdlg.cpp:95 msgid "&Pattern:" msgstr "模板(&P):" #: parts/fileview/filegroupsconfigwidget.cpp:75 msgid "Add File Group" msgstr "添加文件分组" #: parts/fileview/filegroupsconfigwidget.cpp:88 msgid "Edit File Group" msgstr "编辑文件分组" #: parts/fileview/filegroupsconfigwidgetbase.ui:16 #: parts/fileview/filegroupspart.cpp:46 #, no-c-format msgid "File Group View" msgstr "文件分组视图" #: parts/fileview/filegroupspart.cpp:48 msgid "" "File group view

The file group viewer shows all files of the " "project, in groups which can be configured in project settings dialog, " "File Groups tab." msgstr "" "文件分组视图

文件分组视图按照工程设置对话框的文件分组页所配置" "的分组方式显示工程的所有文件。" #: parts/fileview/filegroupspart.cpp:51 parts/fileview/filegroupspart.cpp:54 #: parts/fileview/filegroupswidget.cpp:228 #: parts/fileview/filegroupswidget.cpp:262 msgid "File Groups" msgstr "文件分组" #: parts/fileview/filegroupspart.cpp:51 msgid "File groups in the project directory" msgstr "工程目录的文件分组" #: parts/fileview/filegroupswidget.cpp:44 parts/uimode/uichooser_part.cpp:27 msgid "User Interface" msgstr "用户界面" #: parts/fileview/filegroupswidget.cpp:45 msgid "Others" msgstr "其它" #: parts/fileview/filegroupswidget.cpp:181 #: parts/fileview/filetreeviewwidgetimpl.cpp:40 msgid "Show Non Project Files" msgstr "显示非工程文件" #: parts/fileview/filegroupswidget.cpp:183 #: parts/fileview/filetreeviewwidgetimpl.cpp:42 msgid "Hide Non Project Files" msgstr "显示非工程文件" #: parts/fileview/filegroupswidget.cpp:184 #: parts/fileview/filetreeviewwidgetimpl.cpp:43 msgid "" "Show non project files

Shows files that do not belong to a project " "in a file tree." msgstr "显示非工程文件

在文件树中显示不属于工程内的文件。" #: parts/fileview/filegroupswidget.cpp:186 msgid "Display Location Column" msgstr "显示位置列" #: parts/fileview/filegroupswidget.cpp:188 msgid "" "Display the Location Column

Displays a column with the location of " "the files." msgstr "" #: parts/fileview/filegroupswidget.cpp:230 msgid "Customize..." msgstr "自定义..." #: parts/fileview/filegroupswidget.cpp:231 msgid "" "Customize

Opens Customize File Groups dialog where the " "groups can be managed." msgstr "自定义

打开自定义文件分组对话框,可以管理分组。" #: parts/fileview/filegroupswidget.cpp:259 msgid "Customize File Groups" msgstr "自定义文件分组" #: parts/fileview/filetreeviewwidgetimpl.cpp:99 msgid "Reload Tree" msgstr "重建文件树" #: parts/fileview/filetreeviewwidgetimpl.cpp:100 msgid "Reload tree

Reloads the project files tree." msgstr "重建文件树

重新建立工程文件树。" #: parts/fileview/filetreewidget.cpp:207 parts/fileview/fileviewpart.cpp:68 #: parts/fileview/fileviewpart.cpp:81 parts/fileview/partwidget.cpp:48 #: parts/fileview/partwidget.cpp:49 msgid "File Tree" msgstr "文件树" #: parts/fileview/fileviewpart.cpp:81 msgid "File tree view in the project directory" msgstr "工程目录的文件树视图" #: parts/fileview/partwidget.cpp:51 msgid "" "File tree

The file viewer shows all files of the project in a tree " "layout." msgstr "文件树

文件视图按照树状布局显示工程中的所有文件。" #: parts/fileview/partwidget.cpp:70 msgid "" "

Here you can enter a name filter to limit which files are not " "displayed.

To clear the filter, toggle off the filter button to the " "left.

To reapply the last filter used, toggle on the filter button." msgstr "" "

此处您可以输入名字过滤器来选择哪些文件不被显示

切换左侧的过滤器" "按钮可以清除过滤器。

启用过滤器按钮可以再次应用上次的过滤器。" #: parts/fileview/vcsfiletreewidgetimpl.cpp:206 msgid "Show VCS Fields" msgstr "显示版本控制字段" #: parts/fileview/vcsfiletreewidgetimpl.cpp:208 msgid "Hide VCS Fields" msgstr "隐藏版本控制字段" #: parts/fileview/vcsfiletreewidgetimpl.cpp:209 msgid "" "Show VCS fields

Shows Revision and Timestamp for each " "file contained in VCS repository." msgstr "" "显示版本控制字段

对每个处于版本控制仓库的文件显示版本时" "间。" #: parts/fileview/vcsfiletreewidgetimpl.cpp:213 msgid "Sync with Repository" msgstr "与仓库同步" #: parts/fileview/vcsfiletreewidgetimpl.cpp:215 msgid "" "Sync with repository

Synchronize file status with remote repository." msgstr "与仓库同步

与远程仓库同步文件状态。" #: parts/filter/filterpart.cpp:40 msgid "Execute Command..." msgstr "执行命令..." #: parts/filter/filterpart.cpp:43 msgid "Execute shell command" msgstr "执行 shell 命令" #: parts/filter/filterpart.cpp:44 #, fuzzy msgid "" "Execute shell command

Executes a shell command and outputs its " "result into the current document." msgstr "" "执行 shell 命令

执行一条 shell 命令,将它的结果输出到当前文档中。" #: parts/filter/filterpart.cpp:46 msgid "Filter Selection Through Command..." msgstr "用命令过滤选择区..." #: parts/filter/filterpart.cpp:49 #, fuzzy msgid "Filter selection through a shell command" msgstr "用 shell 命令过滤选择区" #: parts/filter/filterpart.cpp:50 #, fuzzy msgid "" "Filter selection through shell command

Filters selection through a " "shell command and outputs its result into the current document." msgstr "" "用 shell 命令过滤选择区

将选择区内容使用一条 shell 命令进行过滤,结" "果输出到当前文档中。" #: parts/filter/filterpart.cpp:96 msgid "Execute Command" msgstr "执行命令" #: parts/filter/filterpart.cpp:142 msgid "Filter Selection Through Command" msgstr "用命令过滤选择区" #: parts/filter/shellfilterdlg.cpp:122 parts/filter/shellinsertdlg.cpp:119 #, c-format msgid "Process exited with status %1" msgstr "进程退出,状态 %1" #: parts/grepview/grepdlg.cpp:86 parts/grepview/grepviewpart.cpp:61 #: parts/grepview/grepviewwidget.cpp:447 msgid "Find in Files" msgstr "在文件中查找" #: parts/abbrev/addtemplatedlgbase.ui:85 parts/grepview/grepdlg.cpp:105 #, no-c-format msgid "&Template:" msgstr "模板(&T):" #: parts/grepview/grepdlg.cpp:123 #, fuzzy msgid "&Regular Expression" msgstr "正则表达式(&R):" #: parts/grepview/grepdlg.cpp:127 parts/outputviews/filterdlg.ui:127 #: parts/replace/replacedlg.ui:52 #, no-c-format msgid "C&ase sensitive" msgstr "区分大小写(&A)" #: parts/grepview/grepdlg.cpp:157 #, fuzzy msgid "Set directory to that of the current file (Alt+Y)" msgstr "执行到当前函数返回处" #: parts/grepview/grepdlg.cpp:163 #, fuzzy msgid "Rec&ursive" msgstr "递归(&R)" #: parts/grepview/grepdlg.cpp:167 #, fuzzy msgid "Limit search to &project files" msgstr "工程类型(&P):" #: parts/grepview/grepdlg.cpp:172 msgid "&Files:" msgstr "文件(&F):" #: parts/grepview/grepdlg.cpp:180 #, fuzzy msgid "&Exclude:" msgstr "排除在此外(&E):" #: parts/grepview/grepdlg.cpp:199 msgid "New view" msgstr "新建视图" #: parts/grepview/grepdlg.cpp:203 msgid "&Suppress find errors" msgstr "" #: parts/grepview/grepdlg.cpp:210 #, fuzzy msgid "Sea&rch" msgstr "搜索" #: parts/grepview/grepdlg.cpp:220 msgid "" "Enter the regular expression you want to search for here.

Possible " "meta characters are:

  • . - Matches any character
  • ^ - " "Matches the beginning of a line
  • $ - Matches the end of a " "line
  • \\< - Matches the beginning of a word
  • \\> - " "Matches the end of a word
The following repetition operators exist:" "
  • ? - The preceding item is matched at most once
  • * - " "The preceding item is matched zero or more times
  • + - The preceding " "item is matched one or more times
  • {n} - The preceding item " "is matched exactly n times
  • {n,} - The preceding item " "is matched n or more times
  • {,n} - The preceding item " "is matched at most n times
  • {n,m} - The " "preceding item is matched at least n, but at most m times.Furthermore, backreferences to bracketed subexpressions are available via " "the notation \\n." msgstr "" "请在这里输入您要查找的正则表达式。

    可用的元字符有:

    • . - " "匹配任何字符
    • ^ - 匹配行首
    • $ - 匹配行尾
    • \\< " "- 匹配字首
    • \\> - 匹配字尾
    可以有以下重复操作符:
    • ?" " - 前面的项至少匹配一次
    • * - 前面的项匹配零或多次
    • + - " "前面的项匹配一或多次
    • {n} - 前面的项精确匹配n次" "
    • {n,} - 前面的项匹配n或更多次
    • {,n} " "- 前面的项至多匹配n
    • {n,m} - 前面的项至少匹配" "n次,至多匹配m次。
    此外,可以使用记号\\n对用括号括起" "来的子表达式进行向后引用。" #: parts/grepview/grepdlg.cpp:244 msgid "" "Enter the file name pattern of the files to search here. You may give " "several patterns separated by commas" msgstr "在这里输入要查找的文件名模板,多个模板可以用逗号分隔。" #: parts/grepview/grepdlg.cpp:247 #, c-format msgid "" "You can choose a template for the pattern from the combo box and edit it " "here. The string %s in the template is replaced by the pattern input field, " "resulting in the regular expression to search for." msgstr "" "您可以从组合框中选择一个模板样板并编辑它。样板中的字符串 %s 将被模板域中的输" "入所代替,从而生成要查找的正则表达式。" #: parts/grepview/grepdlg.cpp:317 msgid "Please enter a search pattern" msgstr "请输入一个搜索模板" #: parts/grepview/grepviewpart.cpp:53 msgid "Grep Output" msgstr "Grep 输出" #: parts/grepview/grepviewpart.cpp:54 #, fuzzy msgid "" "Find in files

    This window contains the output of a grep command. " "Clicking on an item in the list will automatically open the corresponding " "source file and set the cursor to the line with the match." msgstr "" "Grep

    这个窗口显示 grep 命令的输出。点击列表中的项目将自动打开相应的" "源文件并把光标置于相匹配的行。" #: parts/grepview/grepviewpart.cpp:61 msgid "Output of the grep command" msgstr "grep 命令的输出" #: parts/grepview/grepviewpart.cpp:65 msgid "Find in Fi&les..." msgstr "在文件中查找(&L)..." #: parts/grepview/grepviewpart.cpp:68 msgid "Search for expressions over several files" msgstr "在多个文件中查找表达式" #: parts/grepview/grepviewpart.cpp:69 #, fuzzy msgid "" "Find in files

    Opens the 'Find in files' dialog. There you can enter " "a regular expression which is then searched for within all files in the " "directories you specify. Matches will be displayed, you can switch to a " "match directly." msgstr "" "在文件中查找

    打开文件对话框里的查找功能,那里您可以输入一个正则表达" "式,在您指定目录里的所有文件中查找它,匹配的将被显示出来,而且您可以直接跳转" "到匹配的文件。" #: parts/grepview/grepviewpart.cpp:119 #, c-format msgid "Grep: %1" msgstr "查找:%1" #: parts/grepview/grepviewpart.cpp:121 #, fuzzy msgid "" "Grep

    Opens the find in files dialog and sets the pattern to the " "text under the cursor." msgstr "" "Grep

    在文件对话框里打开查找功能,并将光标下的文本作为查找模板。" #: parts/grepview/grepviewwidget.cpp:137 parts/grepview/grepviewwidget.cpp:460 msgid "Search Results" msgstr "搜索结果" #: parts/grepview/grepviewwidget.cpp:302 #, fuzzy msgid "Unable to create a temporary file for search." msgstr "无法创建标记文件" #: parts/grepview/grepviewwidget.cpp:523 #, c-format msgid "" "_n: *** %n match found. ***\n" "*** %n matches found. ***" msgstr "*** 找到 %n 个匹配项。***" #: parts/konsole/konsoleviewpart.cpp:38 msgid "" "Konsole

    This window contains an embedded konsole window. It will " "try to follow you when you navigate in the source directories" msgstr "" "Konsole

    这个窗口包含一个内嵌的 konsole 终端窗口,您浏览源文件目录时" "它将跟随您的目录。" #: parts/konsole/konsoleviewpart.cpp:44 parts/konsole/konsoleviewpart.cpp:49 msgid "Konsole" msgstr "Konsole" #: parts/konsole/konsoleviewpart.cpp:49 msgid "Embedded console window" msgstr "内嵌终端窗口" #: parts/openwith/openwithpart.cpp:48 msgid "Open as UTF-8" msgstr "按 UTF-8 编码打开" #: parts/openwith/openwithpart.cpp:52 #, fuzzy msgid "Open As" msgstr "打开文件" #: parts/openwith/openwithpart.cpp:53 #, fuzzy msgid "" "Open As

    Lists all encodings that can be used to open the selected " "file." msgstr "打开方式

    列出能用来打开所选择文件的所有应用程序。" #: parts/openwith/openwithpart.cpp:82 msgid "Open With" msgstr "打开方式" #: parts/openwith/openwithpart.cpp:83 msgid "" "Open With

    Lists all applications that can be used to open the " "selected file." msgstr "打开方式

    列出能用来打开所选择文件的所有应用程序。" #: parts/openwith/openwithpart.cpp:88 msgid "Open With..." msgstr "打开方式..." #: parts/openwith/openwithpart.cpp:89 msgid "" "Open With...

    Provides a dialog to choose the application to open " "the selected file." msgstr "" "打开方式......

    提供一个对话框选择用来打开所选择文件的应用程序。" #: parts/outputviews/appoutputviewpart.cpp:45 msgid "Application Output" msgstr "应用程序输出" #: parts/outputviews/appoutputviewpart.cpp:46 msgid "" "Application output

    The stdout/stderr output window is a replacement " "for terminal-based application communication. Running terminal applications " "use this instead of a terminal window." msgstr "" "应用程序输出

    标准/错误输出窗口是基于终端的应用程序通信的替代品。在这" "里而不是终端窗口运行终端应用程序。" #: parts/outputviews/appoutputviewpart.cpp:51 msgid "Output of the executed user program" msgstr "所执行的用户程序的输出" #: parts/outputviews/appoutputviewpart.cpp:108 msgid "Press Enter to continue!" msgstr "按回车继续!" #: parts/outputviews/appoutputwidget.cpp:82 #, c-format msgid "Assertion failed: %1" msgstr "断言失败:%1" #: parts/outputviews/appoutputwidget.cpp:254 #, fuzzy msgid "Clear output" msgstr "编译器输出(&C):" #: parts/outputviews/appoutputwidget.cpp:257 #, fuzzy msgid "Copy selected lines" msgstr "更新选中的项目" #: parts/outputviews/appoutputwidget.cpp:260 #, fuzzy msgid "Save unfiltered" msgstr "保存选中文件" #: parts/outputviews/appoutputwidget.cpp:261 #, fuzzy msgid "Save filtered output" msgstr "编译输出(&C)" #: parts/outputviews/appoutputwidget.cpp:268 #, fuzzy msgid "Edit filter" msgstr "编辑文件(&E)" #: parts/outputviews/makeactionfilter.cpp:75 #: parts/outputviews/makeactionfilter.cpp:76 #: parts/outputviews/makeactionfilter.cpp:77 #: parts/outputviews/makeactionfilter.cpp:96 #: parts/outputviews/makeactionfilter.cpp:211 msgid "compiling" msgstr "正在编译" #: parts/outputviews/makeactionfilter.cpp:79 #, fuzzy msgid "built" msgstr "构建" #: parts/outputviews/makeactionfilter.cpp:80 #: parts/outputviews/makeactionfilter.cpp:83 #: parts/outputviews/makeactionfilter.cpp:84 #: parts/outputviews/makeactionfilter.cpp:95 msgid "generating" msgstr "正在生成" #: parts/outputviews/makeactionfilter.cpp:86 #: parts/outputviews/makeactionfilter.cpp:88 #: parts/outputviews/makeactionfilter.cpp:89 #: parts/outputviews/makeactionfilter.cpp:90 #: parts/outputviews/makeactionfilter.cpp:91 msgid "linking" msgstr "正在连接" #: parts/outputviews/makeactionfilter.cpp:93 msgid "creating" msgstr "正在创建" #: parts/outputviews/makeactionfilter.cpp:94 #: parts/outputviews/makeactionfilter.cpp:97 msgid "installing" msgstr "正在安装" #: parts/outputviews/makeitem.cpp:124 msgid "*** Compilation aborted ***" msgstr "*** 编译中止 ***" #: parts/outputviews/makeitem.cpp:129 msgid "*** Success ***" msgstr "*** 成功 ***" #: parts/outputviews/makeitem.cpp:142 #, c-format msgid "Entering directory %1" msgstr "进入目录 %1" #: parts/outputviews/makeitem.cpp:149 #, c-format msgid "Leaving directory %1" msgstr "退出目录 %1" #: parts/outputviews/makeviewpart.cpp:44 #: parts/outputviews/outputviewsfactory.cpp:14 msgid "Messages Output" msgstr "消息输出" #: parts/outputviews/makeviewpart.cpp:45 msgid "" "Messages output

    The messages window shows the output of the " "compiler and used build tools like make, ant, uic, dcopidl etc. For compiler " "error messages, click on the error message. This will automatically open the " "source file and set the cursor to the line that caused the compiler error/" "warning." msgstr "" "消息输出

    消息窗口显示编译器和其它运行过的工具程序的输出,比如 make、" "ant、uic、dcopidl 等等。对编译器的错误消息,可以点击该消息,自动打开源文件," "并将光标置于引起编译错误或警告的行。" #: parts/outputviews/makeviewpart.cpp:52 msgid "Compiler output messages" msgstr "编译器的输出消息" #: parts/outputviews/makeviewpart.cpp:55 msgid "&Next Error" msgstr "下一个错误(&N)" #: parts/outputviews/makeviewpart.cpp:57 msgid "Go to the next error" msgstr "转至下一个错误点" #: parts/outputviews/makeviewpart.cpp:58 msgid "" "Next error

    Switches to the file and line where the next error was " "reported from." msgstr "下一个错误

    切换到引起下一个错误的文件和行。" #: parts/outputviews/makeviewpart.cpp:59 msgid "&Previous Error" msgstr "上一个错误(&P)" #: parts/outputviews/makeviewpart.cpp:61 msgid "Go to the previous error" msgstr "转至上一个错误点" #: parts/outputviews/makeviewpart.cpp:62 msgid "" "Previous error

    Switches to the file and line where the previous " "error was reported from." msgstr "上一个错误

    切换到引起上一个错误的文件和行。" #: parts/outputviews/makewidget.cpp:569 msgid "The process has finished with errors" msgstr "进程出错结束" #: parts/outputviews/makewidget.cpp:574 msgid "The process has finished successfully" msgstr "进程成功结束" #: parts/outputviews/makewidget.cpp:701 msgid "Line Wrapping" msgstr "文本换行" #: parts/outputviews/makewidget.cpp:703 msgid "" "Line wrapping

    Enables or disables wrapping of command lines " "displayed." msgstr "文本换行

    启用或禁用命令行显示的文本换行。" #: parts/outputviews/makewidget.cpp:706 msgid "Very Short Compiler Output" msgstr "非常简洁的编译器输出" #: parts/outputviews/makewidget.cpp:707 msgid "" "Very short compiler output

    Displays only warnings, errors and the " "file names which are compiled." msgstr "非常简洁的编译器输出

    只显示警告、错误和编译的文件名。" #: parts/outputviews/makewidget.cpp:709 msgid "Short Compiler Output" msgstr "简洁的编译器输出" #: parts/outputviews/makewidget.cpp:710 msgid "" "Short compiler output

    Suppresses all the compiler flags and formats " "to something readable." msgstr "" "简洁的编译器输出

    不显示所有的编译器选项,并使用容易阅读的格式。" #: parts/outputviews/makewidget.cpp:712 msgid "Full Compiler Output" msgstr "完整的编译器输出" #: parts/outputviews/makewidget.cpp:713 msgid "Full compiler output

    Displays unmodified compiler output." msgstr "完整的编译器输出

    显示未经修改的完整编译器输出。" #: parts/outputviews/makewidget.cpp:717 msgid "Show Directory Navigation Messages" msgstr "显示目录切换消息" #: parts/outputviews/makewidget.cpp:718 msgid "" "Show directory navigation messages

    Shows cd commands that " "are executed while building." msgstr "显示目录切换消息

    显示编译时执行的 cd 命令。" #: parts/partexplorer/partexplorer_plugin.cpp:43 msgid "&Part Explorer" msgstr "组件浏览器(&P)" #: parts/partexplorer/partexplorer_plugin.cpp:45 msgid "TDETrader query execution" msgstr "TDETrader 查询执行" #: parts/partexplorer/partexplorer_plugin.cpp:46 msgid "" "Part explorer

    Shows a dialog for TDETrader query execution. Search " "your TDE documentation for more information about TDE services and TDETrader." msgstr "" "组件浏览器

    显示一个执行 TDETrader 查询的对话框。关于 TDE 服务和 " "TDETrader 的更多信息请您在 TDE 文档中查找。" #: parts/partexplorer/partexplorerform.cpp:49 msgid "Name: %1 | Type: %2 | Value: %3" msgstr "名称:%1 | 类型:%2 | 值:%3" #: parts/partexplorer/partexplorerform.cpp:112 msgid "Part Explorer - A Services Lister" msgstr "组件浏览器 - 服务列表" #: parts/partexplorer/partexplorerform.cpp:122 msgid "" "Matching services

    Results (if any) are shown grouped by matching " "service name." msgstr "匹配服务

    输出结果(若存在)按匹配的服务名称分组显示。" #: parts/partexplorer/partexplorerform.cpp:181 msgid "Unknown error." msgstr "未知错误。" #: parts/partexplorer/partexplorerform.cpp:194 #, fuzzy msgid "No service found matching the criteria." msgstr "未找到和规则相匹配的服务!" #: parts/quickopen/quickopen_part.cpp:58 msgid "Quick Open File..." msgstr "快速打开文件..." #: parts/quickopen/quickopen_part.cpp:61 msgid "Quick open file in project" msgstr "快速打开工程中的文件" #: parts/quickopen/quickopen_part.cpp:62 msgid "" "Quick open

    Provides a file name input form with completion listbox " "to quickly open file in a project." msgstr "" "快速打开

    提供一个具有补全功能的文件名输入表格,以便快速打开工程中的" "文件。" #: parts/quickopen/quickopen_part.cpp:64 msgid "Quick Open Class..." msgstr "快速打开类..." #: parts/quickopen/quickopen_part.cpp:67 msgid "Find class in project" msgstr "在工程中查找类" #: parts/quickopen/quickopen_part.cpp:68 msgid "" "Find class

    Provides a class name input form with completion listbox " "to quickly open a file where the class is defined." msgstr "" "类查找

    提供一个具有补全功能的类名输入表格,以便快速打开定义该类的文" "件。" #: parts/quickopen/quickopen_part.cpp:70 msgid "Quick Open Method..." msgstr "快速打开方法..." #: parts/quickopen/quickopen_part.cpp:71 msgid "Quick open function in project" msgstr "快速打开工程中的函数" #: parts/quickopen/quickopen_part.cpp:73 msgid "Switch To..." msgstr "切换到..." #: parts/quickopen/quickopen_part.cpp:74 msgid "Switch to" msgstr "切换到" #: parts/quickopen/quickopen_part.cpp:75 msgid "" "Switch to

    Prompts to enter the name of previously opened file to " "switch to." msgstr "切换到

    询问并切换到以前打开的文件。" #: kdevdesigner/designer/formsettings.ui:199 #: languages/php/phpnewclassdlgbase.ui:27 #: parts/quickopen/quickopenclassdialog.cpp:41 #, no-c-format msgid "Class &name:" msgstr "类名(&N):" #: parts/quickopen/quickopenclassdialog.cpp:42 msgid "Class &list:" msgstr "类列表(&L):" #: parts/quickopen/quickopenclassdialog.cpp:81 #, fuzzy, c-format msgid "Select The Location of Class %1" msgstr "选择连接工具" #: buildtools/qmake/newwidgetdlgbase.ui:110 #: parts/appwizard/filepropspagebase.ui:35 #: parts/quickopen/quickopenclassdialog.cpp:82 #, no-c-format msgid "Class name:" msgstr "类名:" #: buildtools/autotools/addtargetdlgbase.ui:91 #: parts/quickopen/quickopenfiledialog.cpp:41 #: parts/quickopen/quickopenfiledialog.cpp:56 #, no-c-format msgid "File &name:" msgstr "文件名(&N):" #: parts/distpart/distpart_ui.ui:296 parts/quickopen/quickopenfiledialog.cpp:42 #: parts/quickopen/quickopenfiledialog.cpp:57 #, no-c-format msgid "File &list:" msgstr "文件列表(&L):" #: parts/quickopen/quickopenfunctionchooseform.cpp:34 #, c-format msgid "Select One Argument or File of Function %1" msgstr "" #: parts/quickopen/quickopenfunctiondialog.cpp:45 msgid "Function &name:" msgstr "函数名称(&N):" #: parts/quickopen/quickopenfunctiondialog.cpp:46 msgid "Function &list:" msgstr "函数列表(&L):" #: parts/quickopen/quickopenfunctiondialog.cpp:136 msgid "Error: cannot find matching name function." msgstr "" #: parts/regexptest/regexptestdlg.cpp:85 parts/regexptest/regexptestdlg.cpp:103 #: parts/regexptest/regexptestdlg.cpp:179 msgid "No match" msgstr "无匹配" #: parts/regexptest/regexptestdlg.cpp:88 parts/regexptest/regexptestdlg.cpp:106 #: parts/regexptest/regexptestdlg.cpp:183 msgid "Successfully matched" msgstr "匹配成功" #: parts/regexptest/regexptestdlg.cpp:99 msgid "Compile error, your regexp is invalid" msgstr "编译错误。您的正则表达式是无效的" #: parts/regexptest/regexptestdlg.cpp:126 msgid "Repetition operators must not appear as first character" msgstr "重复操作符不能作为第一个字符" #: parts/regexptest/regexptestdlg.cpp:129 msgid "Invalid use of back reference operator" msgstr "无效的后向引用操作符" #: parts/regexptest/regexptestdlg.cpp:132 msgid "Unmatched brace interval operators" msgstr "不匹配的大括号区间操作符" #: parts/regexptest/regexptestdlg.cpp:135 msgid "Unmatched bracket list operators" msgstr "不匹配的方括号列表操作符" #: parts/regexptest/regexptestdlg.cpp:138 msgid "Invalid use of range operator" msgstr "无效的范围操作符" #: parts/regexptest/regexptestdlg.cpp:141 msgid "Unknown character class" msgstr "未知的字符类别" #: parts/regexptest/regexptestdlg.cpp:144 msgid "Invalid collating element" msgstr "无效的并列字元" #: parts/regexptest/regexptestdlg.cpp:147 msgid "Unmatched parenthesis group operators" msgstr "不匹配的小括号分组操作符" #: parts/regexptest/regexptestdlg.cpp:150 msgid "Invalid back reference to subexpression" msgstr "无效的子表达式后向引用" #: parts/regexptest/regexptestdlg.cpp:153 msgid "Trailing backslash" msgstr "结尾的反斜杠转义符错" #: parts/regexptest/regexptestdlg.cpp:156 msgid "Invalid use of pattern operators" msgstr "无效的模板操作符" #: parts/regexptest/regexptestdlg.cpp:160 msgid "Regular expression too large" msgstr "正则表达式太长" #: parts/regexptest/regexptestdlg.cpp:164 msgid "Unknown error" msgstr "未知错误" #: parts/regexptest/regexptestpart.cpp:35 msgid "Debug Regular Expression..." msgstr "调试正则表达式..." #: parts/regexptest/regexptestpart.cpp:38 msgid "Debug regular expression" msgstr "调试正则表达式" #: parts/regexptest/regexptestpart.cpp:39 #, fuzzy msgid "" "Debug regular expression

    Allows to enter a regular expression and " "validate it. It is possible to check syntax of basic POSIX, extended POSIX " "regular expressions and also syntax allowed by TQRegExp and KRegExp classes." msgstr "" "调试正则表达式

    允许输入一个正则表达式并校验它。它可以检查基本 " "POSIX、扩展 POSIX 正则表达式、和 QRegExp、KRegExp 使用的语法。" #: parts/replace/replace_part.cpp:43 msgid "" "Replace

    This window shows a preview of a string replace operation. " "Uncheck a line to exclude that replacement. Uncheck a file to exclude the " "whole file from the operation. Clicking on a line in the list will " "automatically open the corresponding source file and set the cursor to the " "line with the match." msgstr "" "替换

    此窗口显示字符串替换操作的预览。不选中某行可以不执行该替换。不" "选中某文件可以对整个文件都不作替换。点击某行将自动打开相应的源代码文件,并将" "光标置于匹配的行上。" #: parts/replace/replace_part.cpp:52 parts/replace/replace_part.cpp:57 msgid "Project wide string replacement" msgstr "工程范围的字符串替换" #: parts/replace/replace_part.cpp:55 msgid "Find-Select-Replace..." msgstr "查找-选择-替换..." #: parts/replace/replace_part.cpp:58 msgid "" "Find-Select-Replace

    Opens the project wide string replacement " "dialog. There you can enter a string or a regular expression which is then " "searched for within all files in the locations you specify. Matches will be " "displayed in the Replace window, you can replace them with the " "specified string, exclude them from replace operation or cancel the whole " "replace." msgstr "" "查找-选择-替换打开工程范围字符串替换对话框。您可以输入字符串或者正则表" "达式,然后在您指定位置的所有文件中进行查找。匹配结果将在替换窗口中显" "示,您可以用指定的字符串替换它们,不进行某些替换操作,或者完全取消替换操作。" #: parts/replace/replace_part.cpp:102 #, fuzzy, c-format msgid "Replace Project Wide: %1" msgstr "相对于工程文件" #: parts/replace/replace_part.cpp:104 #, fuzzy msgid "" "Replace Project Wide

    Opens the find in files dialog and sets the " "pattern to the text under the cursor." msgstr "" "Grep

    在文件对话框里打开查找功能,并将光标下的文本作为查找模板。" #: parts/scripting/scriptingglobalconfigbase.ui:16 #: parts/scripting/scriptingpart.cpp:57 #, no-c-format msgid "Scripting" msgstr "脚本" #: parts/snippet/snippet_part.cpp:47 parts/snippet/snippet_part.cpp:52 #: parts/snippet/snippet_part.cpp:100 parts/snippet/snippet_widget.cpp:564 msgid "Code Snippets" msgstr "代码片断" #: parts/snippet/snippet_part.cpp:50 msgid "Code Snippet

    This is a list of available snippets." msgstr "" #: parts/snippet/snippet_part.cpp:52 msgid "Insert a code snippet" msgstr "插入代码片断" #: parts/snippet/snippet_part.cpp:76 #, fuzzy msgid "Show Snippet Tree" msgstr "代码片断" #: parts/snippet/snippet_part.cpp:84 msgid "SnippetPart" msgstr "SnippetPart" #: parts/snippet/snippet_part.cpp:85 #, fuzzy msgid "SnippetPart for TDevelop" msgstr "SnippetPart for KDevelop" #: parts/snippet/snippet_part.cpp:87 msgid "(c) 2003" msgstr "(c) 2003" #: languages/python/app_templates/pyqt/documentdetails.ui:46 #: parts/snippet/snippet_part.cpp:88 vcs/subversion/svn_blamewidget.cpp:38 #: vcs/subversion/svn_logviewwidget.cpp:53 #, no-c-format msgid "Author" msgstr "作者" #: parts/snippet/snippet_widget.cpp:141 msgid "Add Group" msgstr "添加组" #: languages/fortran/ftnchekconfigwidgetbase.ui:108 #: languages/fortran/ftnchekconfigwidgetbase.ui:164 #: languages/fortran/ftnchekconfigwidgetbase.ui:289 #: languages/fortran/ftnchekconfigwidgetbase.ui:308 #: languages/fortran/ftnchekconfigwidgetbase.ui:417 #: languages/fortran/ftnchekconfigwidgetbase.ui:535 #: parts/snippet/snippet_widget.cpp:142 parts/snippet/snippet_widget.cpp:144 #: parts/snippet/snippet_widget.cpp:253 parts/snippet/snippet_widget.cpp:447 #: parts/snippet/snippet_widget.cpp:454 parts/snippet/snippet_widget.cpp:961 #: parts/snippet/snippetitem.h:54 #, no-c-format msgid "All" msgstr "全部" #: parts/snippet/snippet_widget.cpp:168 #, fuzzy msgid "Do you really want to remove this group and all its snippets?" msgstr "您真要将文件 %1 返转并丢失您所有的改变吗?" #: parts/snippet/snippet_widget.cpp:206 #, fuzzy msgid "Edit Snippet" msgstr "添加项目" #: parts/snippet/snippet_widget.cpp:252 msgid "Edit Group" msgstr "编辑组" #: parts/snippet/snippet_widget.cpp:554 msgid "Add Item..." msgstr "添加项目..." #: parts/snippet/snippet_widget.cpp:555 parts/snippet/snippet_widget.cpp:566 msgid "Add Group..." msgstr "添加组..." #: parts/snippet/snippet_widget.cpp:600 #, fuzzy msgid "Please enter the value for %1:" msgstr "请输入 P4 用户。" #: parts/snippet/snippet_widget.cpp:672 parts/snippet/snippet_widget.cpp:801 #, fuzzy msgid "Enter Values for Variables" msgstr "外部变量" #: parts/snippet/snippet_widget.cpp:686 #, fuzzy msgid "Enter the replacement values for these variables:" msgstr "输入新文件的名称:" #: parts/snippet/snippet_widget.cpp:712 parts/snippet/snippet_widget.cpp:830 msgid "" "Enable this to save the value entered to the right as the default value for " "this variable" msgstr "" #: parts/snippet/snippet_widget.cpp:713 parts/snippet/snippet_widget.cpp:831 msgid "" "If you enable this option, the value entered to the right will be saved. If " "you use the same variable later, even in another snippet, the value entered " "to the right will be the default value for that variable." msgstr "" #: parts/snippet/snippet_widget.cpp:814 #, fuzzy msgid "Enter the replacement values for %1:" msgstr "输入新文件的名称:" #: parts/snippet/snippet_widget.cpp:820 msgid "Make value &default" msgstr "置为默认值(&D)" #: parts/snippet/snippetdlg.ui.h:20 msgid "" "To use variables in a snippet, you just have to enclose the variablename " "with $-characters. When you use the snippet, you will then be asked for a " "value for this variable. \n" "Example snippet: This is a $VAR$\n" "When you use this snippet you will be prompted for a value for the variable " "$VAR$. Any occurrences of $VAR$ will then be replaced with whatever you have " "entered.\n" "If you need a single $-character in a snippet, which is not used to enclose " "a variable, type $$ (two dollar characters) instead. They will automatically " "be replaced with a single $-character when you use the snippet.\n" "If you want to change the default delimiter to anything different, please " "use the settings dialog to do so." msgstr "" #: parts/snippet/snippetdlg.ui.h:20 #, fuzzy msgid "Snippet help" msgstr "片断(&S):" #: parts/texttools/texttoolspart.cpp:61 parts/texttools/texttoolspart.cpp:64 #: parts/texttools/texttoolswidget.cpp:157 msgid "Text Structure" msgstr "文本结构" #: parts/texttools/texttoolspart.cpp:62 msgid "Text Structure

    This browser shows the structure of the text." msgstr "文本结构

    这个浏览器显示您的文本的结构。" #: parts/texttools/texttoolspart.cpp:64 msgid "Text structure" msgstr "文本结构" #: parts/tools/kapplicationtree.cpp:137 msgid "Known Applications" msgstr "已知应用程序" #: parts/tools/tools_part.cpp:50 msgid "Tools Menu" msgstr "工具菜单" #: parts/tools/tools_part.cpp:51 parts/tools/toolsconfigwidgetbase.ui:16 #, no-c-format msgid "External Tools" msgstr "外部工具" #: parts/tools/toolsconfig.cpp:40 msgid "&Applications:" msgstr "应用程序(&A):" #: parts/tools/toolsconfig.cpp:63 msgid "&Tools menu:" msgstr "工具菜单(&T):" #: parts/tools/toolsconfigwidget.cpp:130 msgid "An entry with this title exists already." msgstr "这个标题的项目已经存在。" #: parts/tools/toolsconfigwidget.cpp:170 msgid "Add to Tools Menu" msgstr "添加到工具菜单" #: parts/tools/toolsconfigwidget.cpp:197 msgid "Add to File Context Menus" msgstr "添加到文件环境菜单" #: parts/tools/toolsconfigwidget.cpp:225 msgid "Add to Directory Context Menus" msgstr "添加到目录环境菜单" #: parts/valgrind/valgrind_dialog.cpp:20 msgid "Valgrind Memory Check" msgstr "Valgrind 内存检查" #: parts/valgrind/valgrind_dialog.cpp:80 parts/valgrind/valgrind_dialog.cpp:140 msgid "" "Could not find valgrind in your $PATH. Please make sure it is installed " "properly." msgstr "在您的 $PATH 中无法找到 valgrind,请确保它已经正确安装。" #: parts/valgrind/valgrind_dialog.cpp:82 parts/valgrind/valgrind_dialog.cpp:142 msgid "Valgrind Not Found" msgstr "未找到 Valgrind" #: parts/valgrind/valgrind_dialog.cpp:185 #, fuzzy msgid "" "Could not find tdecachegrind in your $PATH. Please make sure it is installed " "properly." msgstr "在您的 $PATH 中无法找到 valgrind,请确保它已经正确安装。" #: parts/valgrind/valgrind_dialog.cpp:187 #, fuzzy msgid "KCachegrind Not Found" msgstr "未找到 Valgrind" #: parts/valgrind/valgrind_part.cpp:49 #, fuzzy msgid "Valgrind Output" msgstr "打开 Valgrind 输出" #: parts/valgrind/valgrind_part.cpp:51 #, fuzzy msgid "" "Valgrind

    Shows the output of the valgrind. Valgrind detects
    use " "of uninitialized memory
    reading/writing memory after it has been " "free'd
    reading/writing off the end of malloc'd blocks
    reading/writing " "inappropriate areas on the stack
    memory leaks -- where pointers to " "malloc'd blocks are lost forever
    passing of uninitialised and/or " "unaddressable memory to system calls
    mismatched use of malloc/new/new [] " "vs free/delete/delete []
    some abuses of the POSIX pthread API." msgstr "" "Valgrind

    显示 Valgrind 的输出。Valgrind 能检测
    使用未初始化的内存" "
    在内存释放后进行读/写
    读写超越 malloc 分配的内存块
    读写堆栈中不适当" "的区域
    内存泄露 - malloc 分配的指针永远丢失的问题
    传递未初始化和/或不可" "访问的内存给系统调用
    对 malloc/new/new [] 和 free/delete/delete [] 的使用" "不配对
    一些对 POSIX pthread API 的不当使用。" #: parts/valgrind/valgrind_part.cpp:61 msgid "&Valgrind Memory Leak Check" msgstr "Valgrind 内存泄露检查(&V)" #: parts/valgrind/valgrind_part.cpp:63 parts/valgrind/valgrind_part.cpp:71 msgid "Valgrind memory leak check" msgstr "Valgrind 内存泄露检查" #: parts/valgrind/valgrind_part.cpp:64 msgid "" "Valgrind memory leak check

    Runs Valgrind - a tool to help you find " "memory-management problems in your programs." msgstr "" "Valgrind 内存泄露检查

    运行 Valgrind - 一个帮助您发现程序中内存管理问" "题的工具。" #: parts/valgrind/valgrind_part.cpp:66 #, fuzzy msgid "P&rofile with KCachegrind" msgstr "要打开的配置文件" #: parts/valgrind/valgrind_part.cpp:68 #, fuzzy msgid "Profile with KCachegrind" msgstr "要打开的配置文件" #: parts/valgrind/valgrind_part.cpp:69 msgid "" "Profile with KCachegrind

    Runs your program in calltree and then " "displays profiler information in KCachegrind." msgstr "" #: parts/valgrind/valgrind_part.cpp:90 msgid "Open Valgrind Output" msgstr "打开 Valgrind 输出" #: parts/valgrind/valgrind_part.cpp:96 #, c-format msgid "Could not open valgrind output: %1" msgstr "无法打开 Valgrind 输出:%1" #: parts/valgrind/valgrind_part.cpp:217 msgid "There is already an instance of valgrind running." msgstr "当前已经有一个 valgrind 进程在运行。" #: parts/valgrind/valgrind_widget.cpp:95 msgid "No." msgstr "编号" #: buildtools/qmake/projectconfigurationdlgbase.ui:499 #: parts/valgrind/valgrind_widget.cpp:96 #, no-c-format msgid "Thread" msgstr "线程" #: parts/valgrind/valgrind_widget.cpp:104 msgid "&Open Valgrind Output..." msgstr "打开 Valgrind 输出(&O)..." #: parts/valgrind/valgrind_widget.cpp:106 msgid "Expand All Items" msgstr "展开所有项目" #: parts/valgrind/valgrind_widget.cpp:107 msgid "Collapse All Items" msgstr "折叠所有项目" #: parts/vcsmanager/vcsmanagerpart.cpp:60 msgid "Version Control" msgstr "版本控制" #: parts/vcsmanager/vcsmanagerprojectconfig.cpp:49 msgid "" "_: No Version Control System\n" "None" msgstr "无" #: src/editorproxy.cpp:48 msgid "Show Context Menu" msgstr "显示环境菜单" #: src/generalinfowidget.cpp:58 #, fuzzy msgid "Use global editor settings" msgstr "配置编辑器设置" #: src/generalinfowidget.cpp:95 #, fuzzy msgid "Could not open %1 for reading." msgstr "无法打开文件进行写入。" #: src/generalinfowidget.cpp:155 #, fuzzy msgid "Could not open %1 for writing." msgstr "无法打开文件进行写入。" #: src/generalinfowidget.cpp:186 msgid "" "Could not find configure.in.in, configure.in or configure.ac to update the " "project version." msgstr "" #: src/generalinfowidget.cpp:215 msgid "Please enter a path." msgstr "请输入一个路径。" #: src/generalinfowidget.cpp:220 msgid "'%1' is not an absolute path." msgstr "“%1”不是一个绝对路径。" #: src/generalinfowidget.cpp:226 msgid "'%1' is not a relative path." msgstr "“%1”不是一个相对路径。" #: src/generalinfowidget.cpp:234 msgid "'%1' does not exist." msgstr "“%1”不存在。" #: src/generalinfowidget.cpp:238 msgid "'%1' is not a directory." msgstr "“%1”不是一个目录。" #: src/generalinfowidget.cpp:264 src/generalinfowidget.cpp:267 msgid "'%1' is a valid project directory." msgstr "“%1”不是一个有效的工程目录。" #: src/languageselectwidget.cpp:65 msgid "Additional Language Support" msgstr "额外语言支持" #: src/languageselectwidget.cpp:115 msgid "" "Primary language is '%1'. Please select additional languages the project " "might contain." msgstr "主要语言是“%1”,请选择工程可能含有的其它语言。" #: src/main.cpp:25 src/main_assistant.cpp:25 msgid "Profile to load" msgstr "要打开的配置文件" #: src/main.cpp:26 msgid "Files to load" msgstr "要载入的文件" #: src/main.cpp:32 #, fuzzy msgid "The TDevelop Integrated Development Environment" msgstr "KDevelop 集成开发环境" #: src/main.cpp:33 #, fuzzy msgid "TDevelop" msgstr "KDevelop" #: src/main.cpp:35 src/main_assistant.cpp:35 #, fuzzy msgid "(c) 1999-2007, The KDevelop developers" msgstr "(C) 1999-2005,KDevelop 开发者" #: src/main.cpp:36 src/main_assistant.cpp:36 msgid "" "Release coordinator, Overall improvements, Pascal support, C++ support, New " "File and Documentation parts" msgstr "版本发布管理、整体改进、Pascal 支持、C++ 支持、新建文件和文档部件" #: src/main.cpp:37 src/main_assistant.cpp:37 msgid "Release coordinator, API documentation, Doxygen and autoproject patches" msgstr "版本发布管理、API 文档、Doxygen 和 autoproject 补丁" #: src/main.cpp:38 msgid "Advanced C++ code completion, C++ support, overall improvements" msgstr "" #: src/main.cpp:39 src/main_assistant.cpp:38 msgid "Initial idea, basic architecture, much initial source code" msgstr "初始构思,基本结构,很多初始源代码" #: src/main.cpp:40 src/main_assistant.cpp:39 msgid "KTabBar, bugfixes" msgstr "KTabBar、错误修正" #: src/main.cpp:41 src/main_assistant.cpp:40 msgid "Java & Objective C support" msgstr "Java 和 Objective C 支持" #: src/main.cpp:42 src/main.cpp:43 src/main_assistant.cpp:41 msgid "Debugger frontend" msgstr "调试器前端" #: src/main.cpp:44 src/main_assistant.cpp:42 msgid "PHP support, context menu stuff" msgstr "PHP 的支持,环境菜单等" #: src/main.cpp:45 src/main_assistant.cpp:43 msgid "TDE application templates" msgstr "TDE 应用程序模板" #: src/main.cpp:46 src/main_assistant.cpp:44 msgid "Dist part, bash support, application templates" msgstr "Dist 部分、bash 支持、应用程序模板" #: src/main.cpp:47 src/main_assistant.cpp:45 msgid "Several components, htdig indexing" msgstr "一些组件,htdig 索引" #: src/main.cpp:48 src/main_assistant.cpp:46 #, fuzzy msgid "Help with Automake manager and persistent class store" msgstr "协助 Automake 管理器和持久类存储" #: src/main.cpp:49 msgid "" "Automake manager patches, Astyle plugin update, plugin patches and " "improvements" msgstr "" #: src/main.cpp:50 src/main_assistant.cpp:47 #, fuzzy msgid "Ported to TQt 3, patches, valgrind, diff and perforce support" msgstr "移植到 Qt 3、修补、valgrind、diff 和 perforce 支持" #: src/main.cpp:51 src/main_assistant.cpp:48 #, fuzzy msgid "" "TQEditor component, code completion, Abbrev component, C++ support, Java " "support" msgstr "QEditor 组件、代码补全、Abbrev 组件、C++ 支持、Java 支持" #: src/main.cpp:52 src/main_assistant.cpp:49 msgid "Help with KParts infrastructure" msgstr "协助 KParts 基础结构" #: src/main.cpp:53 src/main_assistant.cpp:50 msgid "Ada support" msgstr "Ada 支持" #: src/main.cpp:54 #, fuzzy msgid "TQMake projectmanager, TQt4 Support" msgstr "QMake 工程管理器" #: src/main.cpp:55 src/main_assistant.cpp:51 #, fuzzy msgid "TQMake projectmanager" msgstr "QMake 工程管理器" #: src/main.cpp:56 src/main_assistant.cpp:52 #, fuzzy msgid "MDI modes, TQEditor, bugfixes" msgstr "MDI 模式、QEditor、问题修补" #: src/main.cpp:57 src/main_assistant.cpp:53 msgid "PartExplorer, redesign of CvsPart, patches, bugs(fixes)" msgstr "PartExplorer、重新设计 CvsPart、补丁、问题修补" #: src/main.cpp:58 src/main_assistant.cpp:54 msgid "" "Replace, Bookmarks, FileList and CTags2 plugins. Overall improvements and " "patches" msgstr "" #: src/main.cpp:59 src/main_assistant.cpp:55 msgid "Filecreate part and other bits and patches" msgstr "Filecreate 组件和其它,以及补丁" #: src/main.cpp:60 src/main_assistant.cpp:56 msgid "ClearCase support" msgstr "ClearCase 支持" #: src/main.cpp:61 src/main_assistant.cpp:57 msgid "Ruby support" msgstr "Ruby 支持" #: src/main.cpp:63 src/main_assistant.cpp:59 msgid "Kate editor component" msgstr "Kate 编辑器组件" #: src/main.cpp:64 src/main_assistant.cpp:60 msgid "HTML documentation component" msgstr "HTML 文档组件" #: src/main.cpp:65 src/main_assistant.cpp:61 msgid "Fortran documentation" msgstr "Fortran 文档" #: src/main.cpp:66 src/main_assistant.cpp:62 msgid "Python documentation utility" msgstr "Python 文档工具" #: src/main.cpp:67 src/main_assistant.cpp:63 msgid "Doxygen wizard" msgstr "Doxygen 向导" #: src/main.cpp:68 src/main.cpp:69 src/main_assistant.cpp:64 #: src/main_assistant.cpp:65 msgid "Fileselector component" msgstr "文件选择器组件" #: src/main.cpp:70 src/main_assistant.cpp:66 msgid "Designer code" msgstr "Designer 代码" #: src/main.cpp:71 src/main_assistant.cpp:67 #, fuzzy msgid "C++ code completion, persistent class store" msgstr "C++ 代码补全,持久类存储" #: src/main.cpp:72 src/main.cpp:73 src/main.cpp:76 src/main_assistant.cpp:68 #: src/main_assistant.cpp:69 src/main_assistant.cpp:72 msgid "Patches" msgstr "修补" #: src/main.cpp:74 src/main_assistant.cpp:70 msgid "Help with Perl support" msgstr "协助 Perl 支持" #: src/main.cpp:75 src/main_assistant.cpp:71 msgid "Documentation index view" msgstr "文档索引视图" #: src/main.cpp:77 src/main_assistant.cpp:73 msgid "" "Documentation Finder, qmake projectmanager patches, usability improvements, " "bugfixes ... " msgstr "" #: src/main.cpp:78 src/main_assistant.cpp:74 #, fuzzy msgid "TQMake project manager patches" msgstr "QMake 工程管理器补丁" #: src/main.cpp:79 src/main_assistant.cpp:75 msgid "Cleanup and bugfixes for qEditor, AutoMake and much other stuff" msgstr "" #: src/main.cpp:80 msgid "SnippetPart, debugger and usability patches" msgstr "" #: src/main.cpp:81 msgid "Artwork for the Ruby language" msgstr "" #: src/main.cpp:102 src/main_assistant.cpp:100 msgid "Loading Settings" msgstr "正在载入设置" #: src/main.cpp:113 src/main_assistant.cpp:105 msgid "Starting GUI" msgstr "正在启动界面" #: src/main_assistant.cpp:32 #, fuzzy msgid "" "The TDevelop Integrated Development Environment:\n" "assistant and documentation viewer" msgstr "KDevelop 集成开发环境。" #: src/main_assistant.cpp:33 #, fuzzy msgid "TDevelop Assistant" msgstr "KDevelop 助手" #: src/mainwindowshare.cpp:112 msgid "&Stop" msgstr "停止(&S)" #: src/mainwindowshare.cpp:116 msgid "" "Stop

    Stops all running processes (like building process, grep " "command, etc.). When placed onto a toolbar provides a popup menu to choose a " "process to stop." msgstr "" "停止

    停止所有运行的进程(比如编译进程、grep 命令等)。如果放在工具栏" "上,它提供一个弹出菜单选择要停止的进程。" #: src/mainwindowshare.cpp:130 msgid "Lets you switch the menubar on/off." msgstr "让您显示和隐藏菜单栏。" #: src/mainwindowshare.cpp:136 msgid "Lets you configure shortcut keys." msgstr "让您配置快捷键。" #: src/mainwindowshare.cpp:142 msgid "Lets you configure toolbars." msgstr "让您配置工具栏。" #: src/mainwindowshare.cpp:148 msgid "Lets you configure system notifications." msgstr "让您配置系统通知。" #: src/mainwindowshare.cpp:152 src/mainwindowshare.cpp:153 #: src/mainwindowshare.cpp:298 #, fuzzy msgid "Configure TDevelop" msgstr "配置 KDevelop" #: src/mainwindowshare.cpp:153 #, fuzzy msgid "Lets you customize TDevelop." msgstr "让您自定义 KDevelop。" #: src/mainwindowshare.cpp:157 msgid "Show statusbar" msgstr "显示状态栏" #: src/mainwindowshare.cpp:158 msgid "Show statusbar

    Hides or shows the statusbar." msgstr "显示状态栏

    隐藏或显示状态栏。" #: src/mainwindowshare.cpp:160 msgid "&Next Window" msgstr "下一个窗口(&N)" #: src/mainwindowshare.cpp:161 msgid "Next window" msgstr "下一个窗口" #: src/mainwindowshare.cpp:162 msgid "Next window

    Switches to the next window." msgstr "下一个窗口

    切换到下一个窗口。" #: src/mainwindowshare.cpp:164 msgid "&Previous Window" msgstr "上一个窗口(&P)" #: src/mainwindowshare.cpp:165 msgid "Previous window" msgstr "上一个窗口" #: src/mainwindowshare.cpp:166 msgid "Previous window

    Switches to the previous window." msgstr "上一个窗口

    切换到上一个窗口。" #: src/mainwindowshare.cpp:168 msgid "&Last Accessed Window" msgstr "上次访问的窗口(&L)" #: src/mainwindowshare.cpp:169 msgid "Last accessed window" msgstr "上次访问的窗口" #: src/mainwindowshare.cpp:170 msgid "" "Last accessed window

    Switches to the last viewed window (Hold the " "Alt key pressed and walk on by repeating the Up key)." msgstr "" "上次访问的窗口

    切换到上次查看的窗口(按住 Alt 键,用上箭头轮流切换)。" #: src/mainwindowshare.cpp:172 msgid "&First Accessed Window" msgstr "首次访问的窗口(&F)" #: src/mainwindowshare.cpp:173 msgid "First accessed window" msgstr "首次访问的窗口" #: src/mainwindowshare.cpp:174 msgid "" "First accessed window

    Switches to the first accessed window (Hold " "the Alt key pressed and walk on by repeating the Down key)." msgstr "" "首次访问的窗口

    切换到首次访问的窗口(按住 Alt 键,用下箭头轮流切换)。" #: src/mainwindowshare.cpp:176 #, fuzzy msgid "Configure Plugins..." msgstr "核心插件" #: src/mainwindowshare.cpp:178 msgid "Configure &Editor..." msgstr "配置编辑器(&E)..." #: src/mainwindowshare.cpp:179 msgid "Configure editor settings" msgstr "配置编辑器设置" #: src/mainwindowshare.cpp:180 msgid "Configure editor

    Opens editor configuration dialog." msgstr "配置编辑器

    打开编辑器配置对话框。" #: src/mainwindowshare.cpp:442 msgid "Show menubar

    Lets you switch the menubar on/off." msgstr "显示菜单栏

    让您显示和隐藏菜单栏。" #: src/newui/button.cpp:58 #, fuzzy msgid "Assign Accelerator..." msgstr "检查快捷键" #: src/newui/button.cpp:60 #, fuzzy msgid "Clear Accelerator" msgstr "检查快捷键" #: src/newui/button.cpp:318 #, fuzzy msgid "Change Button Number" msgstr "更改函数名称" #: src/newui/button.cpp:318 msgid "New accelerator number:" msgstr "" #: src/newui/ddockwindow.cpp:88 #, fuzzy msgid "Move to left dock" msgstr "左移" #: src/newui/ddockwindow.cpp:89 #, fuzzy msgid "Move to right dock" msgstr "右移" #: src/newui/ddockwindow.cpp:90 msgid "Move to bottom dock" msgstr "" #: src/partcontroller.cpp:130 msgid "Open file" msgstr "打开文件" #: src/partcontroller.cpp:131 msgid "" "Open file

    Opens an existing file without adding it to the project." msgstr "打开文件

    添加一个现有的文件到当前选中的工程中。

    " #: src/partcontroller.cpp:134 msgid "Opens recently opened file." msgstr "打开最近使用的文件" #: src/partcontroller.cpp:138 msgid "Save all modified files" msgstr "保存所有修改的文件" #: src/partcontroller.cpp:139 msgid "Save all

    Saves all modified files." msgstr "全部保存

    保存所有修改的文件。" #: src/partcontroller.cpp:142 msgid "Rever&t All" msgstr "全部返转(&T)" #: src/partcontroller.cpp:143 msgid "Revert all changes" msgstr "返转所有修改" #: src/partcontroller.cpp:144 #, fuzzy msgid "" "Revert all

    Reverts all changes in opened files. Prompts to save " "changes so the reversion can be canceled for each modified file." msgstr "" "全部返转

    返转打开的文件中的所有改动。将对每个改动的文件单独询问是否" "要保存改动,从而能不进行返转。" #: src/partcontroller.cpp:148 msgid "Close current file" msgstr "关闭当前文件" #: src/partcontroller.cpp:149 msgid "Closes current file." msgstr "关闭当前的文件。" #: src/partcontroller.cpp:153 msgid "Close all files" msgstr "关闭所有文件" #: src/partcontroller.cpp:154 msgid "Close all

    Close all opened files." msgstr "全部关闭

    关闭所有文件。" #: src/partcontroller.cpp:157 src/simplemainwindow.cpp:622 msgid "Close All Others" msgstr "关闭其它文件" #: src/partcontroller.cpp:158 msgid "Close other files" msgstr "关闭其它文件" #: src/partcontroller.cpp:159 msgid "Close all others

    Close all opened files except current." msgstr "关闭其它文件

    关闭当前文件外的所有其它文件。" #: src/partcontroller.cpp:167 #, fuzzy msgid "Back

    Moves backwards one step in the navigation history." msgstr "后退

    在浏览历史中向后退一步。" #: src/partcontroller.cpp:174 #, fuzzy msgid "Forward

    Moves forward one step in the navigation history." msgstr "前进

    在浏览历史中向前进一步。" #: src/partcontroller.cpp:178 src/partcontroller.cpp:180 msgid "Goto Last Edit Position" msgstr "" #: src/partcontroller.cpp:181 msgid "" "Goto Last Edit Position

    Open the last edited file and position " "cursor at the point of edit" msgstr "" #: src/partcontroller.cpp:1008 msgid "" "The file \"%1\" is modified in memory. Are you sure you want to reload it? " "(Local changes will be lost.)" msgstr "" #: src/partcontroller.cpp:1009 msgid "File is Modified" msgstr "文件已修改" #: src/partcontroller.cpp:1123 msgid "" "The file \"%1\" is modified on disk.\n" "\n" "Are you sure you want to overwrite it? (External changes will be lost.)" msgstr "" #: src/partcontroller.cpp:1124 msgid "File Externally Modified" msgstr "文件在外部修改" #: src/partcontroller.cpp:1124 msgid "Do Not Overwrite" msgstr "不覆盖" #: src/partcontroller.cpp:1483 msgid "" "Conflict: The file \"%1\" has changed on disk while being modified in " "memory.\n" "\n" "You should investigate before saving to make sure you are not losing data." msgstr "" #: src/partcontroller.cpp:1485 msgid "Conflict" msgstr "冲突" #: src/partcontroller.cpp:1492 msgid "" "Warning: The file \"%1\" has been deleted on disk.\n" "\n" "If this was not your intention, make sure to save this file now." msgstr "" #: src/partcontroller.cpp:1494 msgid "File Deleted" msgstr "文件已删除" #: src/partcontroller.cpp:1501 #, fuzzy msgid "" "The file \"%1\" has changed on disk.\n" "\n" "Do you want to reload it?" msgstr "" "错误列表已经改变。\n" "您要保存您的修改吗?" #: src/partcontroller.cpp:1502 msgid "File Changed" msgstr "文件已更改" #: src/partcontroller.cpp:1801 src/partcontroller.cpp:1822 #, fuzzy msgid "unnamed" msgstr "用户名" #: src/plugincontroller.cpp:150 #, c-format msgid "Loading: %1" msgstr "装入:%1" #: src/plugincontroller.cpp:219 msgid "" "Could not load plugin
    Plugin %1 could not be loaded
    Library " "loader error: %2" msgstr "" #: src/plugincontroller.cpp:223 #, fuzzy msgid "Could not load plugin" msgstr "无法找到插件" #: src/profileengine/editor/main.cpp:33 #, fuzzy msgid "TDevelop Profile Editor" msgstr "KDevelop 配置文件编辑器" #: src/profileengine/editor/main.cpp:34 msgid "(c) 2004, The KDevelop Developers" msgstr "(C) 2004,KDevelop 开发者" #: buildtools/qmake/projectconfigurationdlgbase.ui:637 #: src/profileengine/editor/profileeditor.cpp:137 #, no-c-format msgid "Core" msgstr "核心" #: src/profileengine/editor/profileeditor.cpp:201 msgid "Core Plugins" msgstr "核心插件" #: src/profileengine/editor/profileeditor.cpp:203 msgid "Global Plugins" msgstr "全局插件" #: src/profileengine/editor/profileeditor.cpp:205 msgid "Project Plugins" msgstr "工程插件" #: src/profileengine/editor/addprofilewidget.ui:16 #: src/profileengine/editor/profileeditor.cpp:237 #: src/profileengine/editor/profileeditorbase.ui:63 #, no-c-format msgid "Add Profile" msgstr "添加配置文件" #: src/profileengine/editor/profileeditor.cpp:254 msgid "Remove selected profile and all its subprofiles?" msgstr "" #: src/profileengine/editor/profileeditor.cpp:255 #: src/profileengine/editor/profileeditor.cpp:267 #: src/profileengine/editor/profileeditorbase.ui:132 #, no-c-format msgid "Remove Profile" msgstr "删除配置文件" #: src/profileengine/editor/profileeditor.cpp:267 msgid "" "Cannot remove this profile because it is not a local (user-created) profile." msgstr "" #: src/profileengine/editor/profileeditor.cpp:329 msgid "This plugin is already contained in the list of disabled plugins." msgstr "" #: src/profileengine/editor/profileeditor.cpp:330 msgid "Enable Plugin" msgstr "启用插件" #: src/profileengine/editor/profileeditor.cpp:375 msgid "This plugin is already contained in the list of enabled plugins." msgstr "" #: src/profileengine/editor/profileeditor.cpp:376 msgid "Disable Plugin" msgstr "禁用插件" #: src/projectmanager.cpp:96 msgid "&Open Project..." msgstr "打开工程(&O)..." #: src/projectmanager.cpp:99 msgid "Open project" msgstr "打开工程" #: src/projectmanager.cpp:100 msgid "Open project

    Opens a KDevelop3 or KDevelop2 project." msgstr "打开工程

    打开一个 KDevelop3 或者 KDevelop2 工程。" #: src/projectmanager.cpp:103 msgid "Open &Recent Project" msgstr "打开最近的工程(&R)" #: src/projectmanager.cpp:106 msgid "Open recent project" msgstr "打开一个最近的工程" #: src/projectmanager.cpp:107 msgid "Open recent project

    Opens recently opened project." msgstr "打开最近的工程

    打开最近使用过的工程。" #: src/projectmanager.cpp:111 msgid "C&lose Project" msgstr "关闭工程(&L)" #: src/projectmanager.cpp:115 msgid "Close project" msgstr "关闭工程" #: src/projectmanager.cpp:116 msgid "Close project

    Closes the current project." msgstr "关闭工程

    关闭当前工程。" #: src/projectmanager.cpp:118 msgid "Project &Options" msgstr "工程选项(&O)" #: src/projectmanager.cpp:121 msgid "Project options" msgstr "工程选项" #: src/projectmanager.cpp:122 msgid "Project options

    Lets you customize project options." msgstr "工程选项

    您可以自定义工程的选项。" #: src/projectmanager.cpp:133 #, fuzzy msgid "" "*.kdevelop|KDevelop 3 Project Files\n" "*.kdevprj|KDevelop 2 Project Files" msgstr "" "*.tdevelop|KDevelop 3 工程文件\n" "*.kdevprj|KDevelop 2 工程文件" #: parts/appwizard/appwizarddlgbase.ui:321 src/projectmanager.cpp:148 #, no-c-format msgid "Project Options" msgstr "工程选项" #: src/projectmanager.cpp:224 #, fuzzy msgid "Are you sure you want to reopen the current project?" msgstr "打开一个最近的工程" #: src/projectmanager.cpp:224 msgid "Reopen" msgstr "重新打开" #: src/projectmanager.cpp:224 msgid "Do Not Reopen" msgstr "不重新打开" #: src/projectmanager.cpp:278 msgid "Changing plugin profile..." msgstr "正在更该插件配置文件..." #: src/projectmanager.cpp:281 msgid "Loading project plugins..." msgstr "正在工程插件..." #: src/projectmanager.cpp:290 #, fuzzy msgid "error during restoring of the TDevelop session !" msgstr "恢复 KDevelop 会话时发生错误!" #: src/projectmanager.cpp:306 msgid "Project loaded." msgstr "工程已装入。" #: src/projectmanager.cpp:358 src/projectmanager.cpp:366 #, c-format msgid "Could not read project file: %1" msgstr "无法读取工程文件:“%1”" #: src/projectmanager.cpp:385 msgid "This is not a valid project file." msgstr "这不是一个有效的工程文件。" #: src/projectmanager.cpp:406 src/projectmanager.cpp:417 msgid "Could not write the project file." msgstr "无法写入工程文件。" #: src/projectmanager.cpp:488 msgid "No project management plugin %1 found." msgstr "未找到工程管理插件 %1。" #: src/projectmanager.cpp:498 #, c-format msgid "Could not create project management plugin %1." msgstr "无法创建工程管理插件 %1。" #: src/projectmanager.cpp:544 msgid "No language plugin for %1 found." msgstr "未找到 %1 的语言插件。" #: src/projectmanager.cpp:558 #, c-format msgid "Could not create language plugin for %1." msgstr "无法创建 %1 的语言插件。" #: src/projectmanager.cpp:617 msgid "Invalid URL." msgstr "无效的 URL" #: src/projectmanager.cpp:623 #, fuzzy msgid "You do not have 'kdevprj2kdevelop' installed." msgstr "您没有安装“kdevprj2tdevelop”。" #: src/projectsession.cpp:81 msgid "" "The file %1 does not contain valid XML.\n" "The loading of the session failed." msgstr "" "文件 %1 中不包含有效的XML。\n" "会话载入失败。" #: src/projectsession.cpp:94 #, fuzzy msgid "" "The file %1 does not contain a valid TDevelop project session " "('KDevPrjSession').\n" msgstr "文件 %1中不包含有效的 KDevelop 工程会话(“KDevPrjSession”)。\n" #: src/projectsession.cpp:95 msgid "The document type seems to be: '%1'." msgstr "这个文档类型似乎是:“%1”。" #: src/simplemainwindow.cpp:99 msgid "TDevelop &Programming Handbook" msgstr "" #: src/simplemainwindow.cpp:109 #, fuzzy msgid "" "Unable to find plugins, TDevelop will not work properly.\n" "Please make sure that TDevelop is installed in your TDE directory; " "otherwise, you have to add TDevelop's installation path to the environment " "variable TDEDIRS and run tdebuildsycoca. Restart TDevelop afterwards.\n" "Example for BASH users:\n" "export TDEDIRS=/path/to/tdevelop:$TDEDIRS && tdebuildsycoca" msgstr "" "无法找到插件,KDevelop 将不能正常工作!\n" "请确保 KDevelop 安装在您的 TDE 目录下,不然您需要把 KDevelop 的安装路径添加到" "环境变量 TDEDIRS 里,并运行 tdebuildsycoca,然后重新运行 KDevelop。\n" "例如 Bash 用户需要运行:\n" "export TDEDIRS=/path/to/tdevelop:$TDEDIRS && tdebuildsycoca" #: src/simplemainwindow.cpp:116 msgid "Could Not Find Plugins" msgstr "无法找到插件" #: src/simplemainwindow.cpp:422 msgid "Raise &Editor" msgstr "升起编辑器(&E)" #: src/simplemainwindow.cpp:424 msgid "Raise editor" msgstr "升起编辑器" #: src/simplemainwindow.cpp:425 msgid "Raise editor

    Focuses the editor." msgstr "升起编辑器

    将焦点移至编辑器。" #: src/simplemainwindow.cpp:427 #, fuzzy msgid "Lower All Docks" msgstr "工具停靠区(&D)" #: src/simplemainwindow.cpp:430 msgid "Switch to next TabWidget" msgstr "" #: src/simplemainwindow.cpp:433 src/simplemainwindow.cpp:441 msgid "Split &Horizontal" msgstr "水平拆分(&H)" #: src/simplemainwindow.cpp:437 src/simplemainwindow.cpp:445 msgid "Split &Vertical" msgstr "垂直拆分(&V)" #: src/simplemainwindow.cpp:449 #, fuzzy msgid "Split &Horizontal and Open" msgstr "水平拆分(&H)" #: src/simplemainwindow.cpp:453 #, fuzzy msgid "Split &Vertical and Open" msgstr "垂直拆分(&V)" #: src/simplemainwindow.cpp:457 msgid "Switch Left Dock" msgstr "切换左边停靠区" #: src/simplemainwindow.cpp:460 msgid "Switch Right Dock" msgstr "切换右边停靠区" #: src/simplemainwindow.cpp:463 msgid "Switch Bottom Dock" msgstr "切换底部停靠区" #: src/simplemainwindow.cpp:632 msgid "Duplicate" msgstr "复制" #: src/splashscreen.cpp:77 #, c-format msgid "Version %1" msgstr "版本 %1" #: src/statusbar.cpp:101 msgid " Line: %1 Col: %2 " msgstr " 行:%1 列:%2 " #: vcs/clearcase/clearcasepart.cpp:89 vcs/perforce/perforcepart.cpp:97 #, c-format msgid "Actions for %1" msgstr "对 %1 的动作" #: vcs/clearcase/clearcasepart.cpp:90 msgid "Checkin" msgstr "提交" #: vcs/clearcase/clearcasepart.cpp:92 msgid "Checkout" msgstr "提取" #: vcs/clearcase/clearcasepart.cpp:94 msgid "Uncheckout" msgstr "反提取" #: vcs/clearcase/clearcasepart.cpp:97 msgid "Create Element" msgstr "创建元素" #: vcs/clearcase/clearcasepart.cpp:99 msgid "Remove Element" msgstr "删除元素" #: vcs/clearcase/clearcasepart.cpp:102 #, fuzzy msgid "History" msgstr "目录" #: vcs/clearcase/clearcasepart.cpp:109 #, fuzzy msgid "List Checkouts" msgstr "提取" #: vcs/clearcase/clearcasepart.cpp:112 msgid "Clearcase" msgstr "Clearcase" #: vcs/clearcase/clearcasepart.cpp:320 #, fuzzy msgid "Clearcase output errors during diff." msgstr "Clearcase 在比较时输出错误。" #: vcs/clearcase/clearcasepart.cpp:320 vcs/clearcase/clearcasepart.cpp:326 #: vcs/cvsservice/cvspartimpl.cpp:941 vcs/cvsservice/cvspartimpl.cpp:949 #: vcs/perforce/perforcepart.cpp:258 vcs/perforce/perforcepart.cpp:264 msgid "Errors During Diff" msgstr "比较时出错" #: vcs/clearcase/clearcasepart.cpp:325 msgid "Clearcase outputted errors during diff. Do you still want to continue?" msgstr "Clearcase 在比较时输出错误。您仍然要继续吗?" #: vcs/clearcase/clearcasepart.cpp:332 vcs/cvsservice/cvspartimpl.cpp:957 #: vcs/perforce/perforcepart.cpp:270 msgid "There is no difference to the repository." msgstr "和仓库没有任何差别。" #: vcs/clearcase/clearcasepart.cpp:332 vcs/cvsservice/cvspartimpl.cpp:958 msgid "No Difference Found" msgstr "未发现差别" #: vcs/clearcase/commentdlg.cpp:26 msgid "Clearcase Comment" msgstr "Clearcase 注解" #: vcs/clearcase/commentdlg.cpp:30 msgid "Enter log message:" msgstr "输入日志信息:" #: vcs/clearcase/commentdlg.cpp:41 #, fuzzy msgid "Reserve" msgstr "远程 pserver" #: vcs/cvsservice/annotatedialog.cpp:27 msgid "CVS Annotate Dialog" msgstr "CVS 批注对话框" #: vcs/cvsservice/annotatedialog.cpp:33 vcs/cvsservice/annotatedialog.cpp:60 msgid "Annotate" msgstr "批注" #: vcs/cvsservice/annotatepage.cpp:109 #, fuzzy, c-format msgid "Annotate failed with exitStatus == %1" msgstr "日志失败,状态 %1" #: vcs/cvsservice/annotatepage.cpp:109 #, fuzzy msgid "Annotate Failed" msgstr "日志失败" #: vcs/cvsservice/annotatepage.cpp:211 #, fuzzy msgid "The selected revision does not exist." msgstr "这个扩展名的文件模板不存在。" #: vcs/cvsservice/checkoutdialog.cpp:73 msgid "CVS Checkout" msgstr "CVS 提取" #: vcs/cvsservice/checkoutdialog.cpp:263 #, fuzzy msgid "Please, choose a valid working directory" msgstr "请选择一个工程目录" #: vcs/cvsservice/checkoutdialog.cpp:265 msgid "Please, choose a CVS server." msgstr "" #: vcs/cvsservice/checkoutdialog.cpp:267 msgid "Please, fill the CVS module field." msgstr "" #: vcs/cvsservice/commitdlg.cpp:67 msgid "" "You are committing your changes without any comment. This is not a good " "practice. Continue anyway?" msgstr "您提交变更时没有给出任何注解。这不是一个好做法。您仍然要继续吗?" #: vcs/cvsservice/commitdlg.cpp:68 msgid "CVS Commit Warning" msgstr "CVS 提交警告" #: vcs/cvsservice/commitdlg.cpp:70 msgid "askWhenCommittingEmptyLogs" msgstr "无注解提交时询问" #: vcs/cvsservice/cvsdiffpage.cpp:68 msgid "Error: passed revisions are empty!" msgstr "错误:给出的版本号为空!" #: vcs/cvsservice/cvsdiffpage.cpp:68 vcs/cvsservice/cvsdiffpage.cpp:101 #: vcs/cvsservice/cvspartimpl.cpp:654 msgid "Error During Diff" msgstr "比较时出错" #: vcs/cvsservice/cvsdiffpage.cpp:101 #, fuzzy msgid "An error occurred during diffing." msgstr "作比较时发生错误。" #: vcs/cvsservice/cvslogdialog.cpp:36 msgid "CVS Log & Diff Dialog" msgstr "CVS 日志和差别对话框" #: vcs/cvsservice/cvslogdialog.cpp:42 msgid "Log From CVS" msgstr "从 CVS 提取日志" #: vcs/cvsservice/cvslogdialog.cpp:82 msgid "Diff between %1 and %2" msgstr "%1 和 %2 的差别" #: vcs/cvsservice/cvslogpage.cpp:116 vcs/cvsservice/editorsdialog.cpp:64 #, c-format msgid "Log failed with exitStatus == %1" msgstr "日志失败,状态 %1" #: vcs/cvsservice/cvslogpage.cpp:116 vcs/cvsservice/editorsdialog.cpp:64 msgid "Log Failed" msgstr "日志失败" #: vcs/cvsservice/cvslogpage.cpp:180 #, fuzzy msgid "invalid link clicked" msgstr " (无效)" #: vcs/cvsservice/cvsoptions.cpp:286 msgid "Error while guessing repository location." msgstr "" #: vcs/cvsservice/cvspart.cpp:133 msgid "" "CVS

    Concurrent Versions System operations window. Shows output of " "Cervisia CVS Service." msgstr "CVS

    并行版本控制系统操作窗口,显示 Cervisia CVS 服务的输出。" #: vcs/cvsservice/cvspart.cpp:134 #, fuzzy msgid "CvsService Output" msgstr "CVS 服务" #: vcs/cvsservice/cvspart.cpp:135 vcs/cvsservice/cvspart.cpp:279 #: vcs/cvsservice/cvspart.cpp:365 msgid "CvsService" msgstr "CVS 服务" #: vcs/cvsservice/cvspart.cpp:135 msgid "cvs output" msgstr "CVS 输出" #: vcs/cvsservice/cvspart.cpp:146 msgid "&Commit to Repository" msgstr "提交到仓库(&C)" #: vcs/cvsservice/cvspart.cpp:148 vcs/subversion/subversion_part.cpp:102 msgid "Commit file(s)" msgstr "提交文件" #: vcs/cvsservice/cvspart.cpp:149 vcs/cvsservice/cvspart.cpp:324 #: vcs/subversion/subversion_part.cpp:103 #: vcs/subversion/subversion_part.cpp:223 msgid "Commit file(s)

    Commits file to repository if modified." msgstr "提交文件

    将修改过的文件提交到仓库。" #: vcs/cvsservice/cvspart.cpp:151 msgid "&Difference Between Revisions" msgstr "不同版本间的差异(&D)" #: vcs/cvsservice/cvspart.cpp:153 msgid "Build difference" msgstr "构建差异" #: vcs/cvsservice/cvspart.cpp:154 vcs/cvsservice/cvspart.cpp:329 msgid "Build difference

    Builds difference between releases." msgstr "构建差异

    构建不同版本之间的差异。" #: vcs/cvsservice/cvspart.cpp:156 msgid "Generate &Log" msgstr "生成日志(&L)" #: vcs/cvsservice/cvspart.cpp:158 msgid "Generate log" msgstr "生成日志" #: vcs/cvsservice/cvspart.cpp:159 vcs/cvsservice/cvspart.cpp:331 msgid "Generate log

    Produces log for this file." msgstr "生成日志

    生成此文件的日志。" #: vcs/cvsservice/cvspart.cpp:161 msgid "&Annotate" msgstr "批注(&A)" #: vcs/cvsservice/cvspart.cpp:163 msgid "Generate annotations" msgstr "生成批注" #: vcs/cvsservice/cvspart.cpp:164 #, fuzzy msgid "Annotate

    Produces annotations for this file." msgstr "生成日志

    生成此文件的日志。" #: vcs/cvsservice/cvspart.cpp:166 vcs/subversion/subversion_part.cpp:110 msgid "&Add to Repository" msgstr "添加到仓库(&A)" #: vcs/cvsservice/cvspart.cpp:168 vcs/subversion/subversion_part.cpp:111 msgid "Add file to repository" msgstr "将文件添加到仓库" #: vcs/cvsservice/cvspart.cpp:169 vcs/cvsservice/cvspart.cpp:342 msgid "Add to repository

    Adds file to repository." msgstr "添加到仓库中

    添加文件到仓库中。" #: vcs/cvsservice/cvspart.cpp:171 msgid "&Edit Files" msgstr "编辑文件(&E)" #: vcs/cvsservice/cvspart.cpp:173 msgid "Mark as being edited" msgstr "" #: vcs/cvsservice/cvspart.cpp:174 msgid "Mark as being edited

    Mark the files as being edited." msgstr "" #: vcs/cvsservice/cvspart.cpp:176 #, fuzzy msgid "&Unedit Files" msgstr "UI 文件(&U):" #: vcs/cvsservice/cvspart.cpp:178 #, fuzzy msgid "Remove editing mark from files" msgstr "正在为文件删除标签/分支..." #: vcs/cvsservice/cvspart.cpp:179 vcs/cvsservice/cvspart.cpp:340 #, fuzzy msgid "Remove editing mark

    Remove the editing mark from the files." msgstr "删除粘滞标志

    删除文件上的粘滞标志。" #: vcs/cvsservice/cvspart.cpp:181 msgid "&Show Editors" msgstr "显示编辑器(&S)" #: vcs/cvsservice/cvspart.cpp:183 #, fuzzy msgid "Show editors" msgstr "显示方法" #: vcs/cvsservice/cvspart.cpp:184 vcs/cvsservice/cvspart.cpp:336 #, fuzzy msgid "Show editors

    Shows the list of users who are editing files." msgstr "全部关闭

    关闭所有文件。" #: vcs/cvsservice/cvspart.cpp:186 msgid "Add to Repository as &Binary" msgstr "作为二进制文件添加到仓库中(&B)" #: vcs/cvsservice/cvspart.cpp:188 msgid "Add file to repository as binary" msgstr "作为二进制文件添加到仓库中" #: vcs/cvsservice/cvspart.cpp:189 vcs/cvsservice/cvspart.cpp:344 msgid "" "Add to repository as binary

    Adds file to repository as binary (-kb " "option)." msgstr "" "作为二进制文件添加到仓库中

    作为二进制文件添加到仓库中(-kb 选项)。" #: vcs/cvsservice/cvspart.cpp:191 vcs/subversion/subversion_part.cpp:117 msgid "&Remove From Repository" msgstr "从仓库中删除(&R)" #: vcs/cvsservice/cvspart.cpp:193 vcs/perforce/perforcepart.cpp:83 #: vcs/subversion/subversion_part.cpp:118 msgid "Remove from repository" msgstr "从仓库中删除" #: vcs/cvsservice/cvspart.cpp:194 vcs/cvsservice/cvspart.cpp:346 #: vcs/subversion/subversion_part.cpp:119 #: vcs/subversion/subversion_part.cpp:227 msgid "Remove from repository

    Removes file(s) from repository." msgstr "从仓库中删除

    从仓库中删除文件。" #: vcs/cvsservice/cvspart.cpp:196 msgid "&Update/Revert to Another Release" msgstr "更新/返转为另一个版本(&U)" #: vcs/cvsservice/cvspart.cpp:198 msgid "Update/revert" msgstr "更新/返转" #: vcs/cvsservice/cvspart.cpp:199 vcs/cvsservice/cvspart.cpp:354 msgid "" "Update/revert to another release

    Updates/reverts file(s) to another " "release." msgstr "更新/返转为另一个版本

    将文件更新/返转为另一个版本。" #: vcs/cvsservice/cvspart.cpp:201 msgid "R&emove Sticky Flag" msgstr "删除粘滞标志(&E)" #: vcs/cvsservice/cvspart.cpp:203 msgid "Remove sticky flag" msgstr "删除粘滞标志" #: vcs/cvsservice/cvspart.cpp:204 vcs/cvsservice/cvspart.cpp:356 msgid "Remove sticky flag

    Removes sticky flag from file(s)." msgstr "删除粘滞标志

    删除文件上的粘滞标志。" #: vcs/cvsservice/cvspart.cpp:206 msgid "Make &Tag/Branch" msgstr "制作标签/分支(&T)" #: vcs/cvsservice/cvspart.cpp:208 msgid "Make tag/branch" msgstr "加标签/分支" #: vcs/cvsservice/cvspart.cpp:209 vcs/cvsservice/cvspart.cpp:350 msgid "Make tag/branch

    Tags/branches selected file(s)." msgstr "加标签/分支

    对所选择的文件加标签/分支。" #: vcs/cvsservice/cvspart.cpp:211 #, fuzzy msgid "&Delete Tag" msgstr "删除页面" #: vcs/cvsservice/cvspart.cpp:213 #, fuzzy msgid "Delete tag" msgstr "删除页面" #: vcs/cvsservice/cvspart.cpp:214 vcs/cvsservice/cvspart.cpp:352 #, fuzzy msgid "Delete tag

    Delete tag from selected file(s)." msgstr "删除标签/分支

    对所选择的文件删除标签/分支。" #: vcs/cvsservice/cvspart.cpp:216 msgid "&Ignore in CVS Operations" msgstr "在 CVS 操作中忽略(&I)" #: vcs/cvsservice/cvspart.cpp:218 msgid "Ignore in CVS operations" msgstr "在 CVS 操作中忽略" #: vcs/cvsservice/cvspart.cpp:219 vcs/cvsservice/cvspart.cpp:360 msgid "" "Ignore in CVS operations

    Ignore file(s) by adding it to .cvsignore " "file." msgstr "" "在 CVS 操作中忽略

    将文件名放入 .cvsignore 文件,CVS 操作将忽略它们。" #: vcs/cvsservice/cvspart.cpp:221 msgid "Do &Not Ignore in CVS Operations" msgstr "不在 CVS 操作中忽略(&N)" #: vcs/cvsservice/cvspart.cpp:223 msgid "Do not ignore in CVS operations" msgstr "不在 CVS 操作中忽略" #: vcs/cvsservice/cvspart.cpp:224 vcs/cvsservice/cvspart.cpp:362 msgid "" "Do not ignore in CVS operations

    Do not ignore file(s) by removing\n" "it from .cvsignore file." msgstr "" "不在 CVS 操作中忽略

    将文件名从 .cvsignore 文件中删除,CVS 操作将不再" "忽略它们。" #: vcs/cvsservice/cvspart.cpp:226 msgid "&Log to Server" msgstr "登录到服务器(&L)" #: vcs/cvsservice/cvspart.cpp:228 msgid "Login to server" msgstr "登录到服务器" #: vcs/cvsservice/cvspart.cpp:229 msgid "Login to server

    Logs in to the CVS server." msgstr "登录到服务器

    登录到 CVS 服务器。" #: vcs/cvsservice/cvspart.cpp:231 msgid "L&ogout From Server" msgstr "退出服务器(&O)" #: vcs/cvsservice/cvspart.cpp:233 msgid "Logout from server" msgstr "退出服务器" #: vcs/cvsservice/cvspart.cpp:234 msgid "Logout from server

    Logs out from the CVS server." msgstr "退出服务器

    从 CVS 服务器退出。" #: vcs/cvsservice/cvspart.cpp:333 #, fuzzy msgid "Generate Annotate

    Produces annotation output for this file." msgstr "生成日志

    生成此文件的日志。" #: vcs/cvsservice/cvspart.cpp:338 msgid "Mark as beeing edited

    Mark the files as beeing edited." msgstr "" #: vcs/cvsservice/cvspartimpl.cpp:127 msgid "" "Open a project first.\n" "Operation will be aborted." msgstr "" "请先打开一个工程。\n" "操作将中止。" #: vcs/cvsservice/cvspartimpl.cpp:134 msgid "" "Another CVS operation is executing: do you want to cancel it \n" "and start this new one?" msgstr "另一个 CVS 操作正在进行:您是否要取消它,开始新的操作?" #: vcs/cvsservice/cvspartimpl.cpp:136 #, fuzzy msgid "CVS: Operation Already Pending " msgstr "CVS:操作已在进行 " #: vcs/cvsservice/cvspartimpl.cpp:151 #, fuzzy msgid "None of the file(s) you selected seem to be valid for repository." msgstr "您选择的文件没有哪个在仓库中是有效的。" #: vcs/cvsservice/cvspartimpl.cpp:370 msgid "Unable to checkout" msgstr "无法提取文件" #: vcs/cvsservice/cvspartimpl.cpp:519 #, fuzzy msgid "Do you really want to unedit the selected files?" msgstr "您真要删除子工程 %1 及所有目标和文件吗?" #: vcs/cvsservice/cvspartimpl.cpp:520 #, fuzzy msgid "CVS - Unedit Files" msgstr "UI 文件(&U):" #: vcs/cvsservice/cvspartimpl.cpp:521 #, fuzzy msgid "Unedit" msgstr "无设置" #: vcs/cvsservice/cvspartimpl.cpp:522 msgid "Do Not Unedit" msgstr "" #: vcs/cvsservice/cvspartimpl.cpp:653 #, fuzzy msgid "Sorry, cannot diff." msgstr "抱歉,无法比较差别!" #: vcs/cvsservice/cvspartimpl.cpp:674 msgid "Creating Tag/Branch for files ..." msgstr "正在为文件创建标签/分支..." #: vcs/cvsservice/cvspartimpl.cpp:698 #, fuzzy msgid "Removing Tag from files ..." msgstr "正在为文件删除标签/分支..." #: vcs/cvsservice/cvspartimpl.cpp:791 #: vcs/cvsservice/integrator/integratordlg.cpp:101 msgid "" "Unable to find the Cervisia KPart. \n" "Cervisia Integration will not be available. Please check your\n" "Cervisia installation and re-try. Reason was:\n" msgstr "" "无法找到 Cervisia KPart 组件。\n" "Cervisia 集成功能将无法使用,请检查您的 Cervisia 安装,\n" "然后重试。原因是:\n" #: vcs/cvsservice/cvspartimpl.cpp:839 #, fuzzy msgid "Do you want the files to be added to CVS repository too?" msgstr "您是否要将它们添加到 CVS 仓库中?" #: vcs/cvsservice/cvspartimpl.cpp:840 msgid "CVS - New Files Added to Project" msgstr "CVS - 新文件已添加到工程中" #: vcs/cvsservice/cvspartimpl.cpp:842 msgid "Do Not Add" msgstr "不添加" #: vcs/cvsservice/cvspartimpl.cpp:843 msgid "askWhenAddingNewFiles" msgstr "添加新文件时询问" #: vcs/cvsservice/cvspartimpl.cpp:865 #, fuzzy msgid "" "Do you want them to be removed from CVS repository too?\n" "Warning: They will be removed from disk too." msgstr "" "您想要将它们从 CVS 仓库中删除吗?\n" "警告:它们也将从硬盘上删除!" #: vcs/cvsservice/cvspartimpl.cpp:866 msgid "CVS - Files Removed From Project" msgstr "CVS - 文件已从工程中删除" #: vcs/cvsservice/cvspartimpl.cpp:868 msgid "askWhenRemovingFiles" msgstr "删除文件时询问" #: vcs/cvsservice/cvspartimpl.cpp:934 msgid "Operation aborted (process killed)." msgstr "操作已中止(进程被杀死)。" #: vcs/cvsservice/cvspartimpl.cpp:935 msgid "CVS Diff" msgstr "CVS 比较" #: vcs/cvsservice/cvspartimpl.cpp:940 msgid "CVS outputted errors during diff." msgstr "CVS 在比较时输出错误。" #: vcs/cvsservice/cvspartimpl.cpp:948 #, fuzzy msgid "CVS output errors during diff. Do you still want to continue?" msgstr "CVS 在比较时输出错误。您仍然要继续吗?" #: vcs/cvsservice/cvsprocesswidget.cpp:145 #, fuzzy, c-format msgid "Started job: %1" msgstr "已开始的任务:" #: vcs/cvsservice/cvsprocesswidget.cpp:167 msgid "*** Job canceled by user request ***" msgstr "*** 任务已按用户请求取消 ***" #: vcs/cvsservice/cvsprocesswidget.cpp:189 #, c-format msgid "Job finished with exitCode == %1" msgstr "任务完成,状态为 %1" #: vcs/cvsservice/cvsprocesswidget.cpp:193 msgid "Done CVS command ..." msgstr "CVS 命令完成..." #: vcs/cvsservice/editorsdialog.cpp:87 vcs/cvsservice/editorsdialog.cpp:100 msgid "User" msgstr "用户" #: vcs/cvsservice/editorsdialog.cpp:109 msgid "No files from your query are marked as being edited." msgstr "" #: vcs/cvsservice/integrator/integratordlg.cpp:62 #: vcs/cvsservice/integrator/integratordlg.cpp:82 #: vcs/cvsservice/integrator/integratordlg.cpp:84 #: vcs/cvsservice/integrator/integratordlg.cpp:129 #: vcs/cvsservice/integrator/integratordlg.cpp:131 #, fuzzy msgid "Init CVS Repository" msgstr "CVS 仓库(&R):" #: vcs/cvsservice/integrator/integratordlg.cpp:82 msgid "" "cvs init did not exit normally. Please check if cvs is installed and works " "correctly." msgstr "" #: vcs/cvsservice/integrator/integratordlg.cpp:84 msgid "" "cvs init exited with status %1. Please check if the cvs location is correct." msgstr "" #: vcs/cvsservice/integrator/integratordlg.cpp:129 msgid "" "cvs import did not exit normally. Please check if cvs is installed and works " "correctly." msgstr "" #: vcs/cvsservice/integrator/integratordlg.cpp:131 msgid "" "cvs import exited with status %1. Please check if the cvs location is " "correct." msgstr "" #: vcs/perforce/commitdlg.cpp:32 msgid "Perforce Submit" msgstr "Perforce 提交" #: vcs/perforce/commitdlg.cpp:42 msgid "&Enter description:" msgstr "输入描述(&E):" #: vcs/perforce/commitdlg.cpp:54 msgid "C&lient:" msgstr "客户(&L):" #: vcs/perforce/commitdlg.cpp:58 msgid "&User:" msgstr "用户(&U):" #: vcs/perforce/commitdlg.cpp:62 msgid "&File(s):" msgstr "文件(&F):" #: vcs/perforce/commitdlg.cpp:147 msgid "Please enter the P4 client name." msgstr "请输入 P4 客户名。" #: vcs/perforce/commitdlg.cpp:151 msgid "Please enter the P4 user." msgstr "请输入 P4 用户。" #: vcs/perforce/commitdlg.cpp:155 #, fuzzy msgid "The changelist does not contain any files." msgstr "变更列表未包括任何文件。" #: vcs/perforce/perforcepart.cpp:60 vcs/perforce/perforcepart.cpp:101 msgid "Edit

    Opens file(s) in a client workspace for edit." msgstr "编辑

    在客户工作区打开文件进行编辑。" #: vcs/perforce/perforcepart.cpp:61 vcs/perforce/perforcepart.cpp:63 #: vcs/perforce/perforcepart.cpp:102 vcs/perforce/perforcepart.cpp:156 #: vcs/subversion/subversion_part.cpp:135 msgid "Revert" msgstr "返转" #: vcs/perforce/perforcepart.cpp:64 vcs/perforce/perforcepart.cpp:104 msgid "Revert

    Discards changes made to open files." msgstr "返转

    放弃对打开的文件所作的修改。" #: vcs/perforce/perforcepart.cpp:65 vcs/perforce/perforcepart.cpp:67 #: vcs/perforce/perforcepart.cpp:105 msgid "Submit" msgstr "提交" #: vcs/perforce/perforcepart.cpp:68 vcs/perforce/perforcepart.cpp:107 msgid "Submit

    Sends changes made to open files to the depot." msgstr "提交

    将打开的文件所作的修改发送给仓库。" #: vcs/perforce/perforcepart.cpp:69 vcs/perforce/perforcepart.cpp:71 #: vcs/perforce/perforcepart.cpp:108 msgid "Sync" msgstr "同步" #: vcs/perforce/perforcepart.cpp:72 vcs/perforce/perforcepart.cpp:110 msgid "Sync

    Copies files from the depot into the workspace." msgstr "同步

    从仓库复制文件到工作区。" #: vcs/perforce/perforcepart.cpp:73 vcs/perforce/perforcepart.cpp:112 msgid "Diff Against Repository" msgstr "和仓库作比较" #: vcs/perforce/perforcepart.cpp:75 msgid "Diff against repository" msgstr "和仓库作比较" #: vcs/perforce/perforcepart.cpp:76 vcs/perforce/perforcepart.cpp:114 msgid "" "Diff against repository

    Compares a client workspace file to a " "revision in the depot." msgstr "和仓库作比较

    对客户工作区的文件和仓库里的某一版本作比较。" #: vcs/perforce/perforcepart.cpp:77 vcs/perforce/perforcepart.cpp:115 msgid "Add to Repository" msgstr "添加到仓库" #: vcs/perforce/perforcepart.cpp:79 msgid "Add to repository" msgstr "添加到仓库" #: vcs/perforce/perforcepart.cpp:80 vcs/perforce/perforcepart.cpp:117 msgid "" "Add to repository

    Open file(s) in a client workspace for addition " "to the depot." msgstr "添加到仓库

    在客户工作区打开文件,添加到仓库。" #: vcs/perforce/perforcepart.cpp:81 vcs/perforce/perforcepart.cpp:118 msgid "Remove From Repository" msgstr "从仓库中删除" #: vcs/perforce/perforcepart.cpp:84 vcs/perforce/perforcepart.cpp:120 msgid "" "Remove from repository

    Open file(s) in a client workspace for " "deletion from the depot." msgstr "从仓库中删除

    在客户工作区打开文件,从仓库中删除。" #: vcs/perforce/perforcepart.cpp:121 msgid "Perforce" msgstr "Perforce" #: vcs/perforce/perforcepart.cpp:132 msgid "Cannot handle directories, please select single files" msgstr "无法处理目录,请选择单个文件" #: vcs/perforce/perforcepart.cpp:155 msgid "Do you really want to revert the file %1 and lose all your changes?" msgstr "您真要将文件 %1 返转并丢失您所有的改变吗?" #: vcs/perforce/perforcepart.cpp:156 #, fuzzy msgid "Do Not Revert" msgstr "返转" #: vcs/perforce/perforcepart.cpp:168 msgid "Submitting of subdirectories is not supported" msgstr "不支持提交子目录。" #: vcs/perforce/perforcepart.cpp:258 #, fuzzy msgid "P4 output errors during diff." msgstr "P4 在作比较时输出错误。" #: vcs/perforce/perforcepart.cpp:263 #, fuzzy msgid "P4 output errors during diff. Do you still want to continue?" msgstr "P4 在作比较时输出错误。您仍然要继续吗?" #: vcs/perforce/perforcepart.cpp:270 msgid "No Differences Found" msgstr "未发现差别" #: vcs/perforce/perforcepart.h:33 #, fuzzy msgid "Perforce is a version control system" msgstr "版本控制系统(&V):" #: vcs/subversion/integrator/svnintegratordlg.cpp:73 #, fuzzy msgid "Unable to create project directories on repository" msgstr "工程目录的文件树视图" #: vcs/subversion/integrator/svnintegratordlg.cpp:84 #, fuzzy msgid "Unable to import into repository." msgstr "提交到仓库" #: vcs/subversion/integrator/svnintegratordlg.cpp:106 #, fuzzy msgid "Unable to checkout from repository." msgstr "从仓库中删除" #: vcs/subversion/kdevsvnd.cpp:52 #, fuzzy msgid "Enter Commit Log Message:" msgstr "输入日志信息:" #: vcs/subversion/kdevsvnd.cpp:74 #, fuzzy msgid "Open SSL certificate file" msgstr "打开源文件(&O)" #: vcs/subversion/kdevsvnd_widgets.cpp:27 msgid "Accept Permanently" msgstr "" #: vcs/subversion/kdevsvnd_widgets.cpp:28 #, fuzzy msgid "Accept Temporarily" msgstr " 临时" #: vcs/subversion/kdevsvnd_widgets.cpp:29 #, fuzzy msgid "Reject" msgstr "矩形" #: vcs/subversion/kdevsvnd_widgets.cpp:40 #, fuzzy msgid "Hostname" msgstr "主机名(&H):" #: vcs/subversion/kdevsvnd_widgets.cpp:41 msgid "FingerPrint" msgstr "" #: vcs/subversion/kdevsvnd_widgets.cpp:42 msgid "Valid From" msgstr "" #: vcs/subversion/kdevsvnd_widgets.cpp:43 msgid "Valid Until" msgstr "" #: vcs/subversion/kdevsvnd_widgets.cpp:44 #, fuzzy msgid "Issuer" msgstr "用户" #: vcs/subversion/kdevsvnd_widgets.cpp:45 #, fuzzy msgid "Cert" msgstr "返转" #: vcs/subversion/subversion_core.cpp:146 #, fuzzy msgid "Subversion Update" msgstr "Subversion 消息" #: vcs/subversion/subversion_core.cpp:222 msgid "the local disk checked out copy." msgstr "" #: vcs/subversion/subversion_core.cpp:224 #, fuzzy msgid "the current svn HEAD version." msgstr "补全当前表达式" #: vcs/subversion/subversion_core.cpp:226 #, fuzzy, c-format msgid "No differences between the file and %1" msgstr "%1 和 %2 的差别" #: vcs/subversion/subversion_core.cpp:226 #, fuzzy msgid "No difference" msgstr "构建差异" #: vcs/subversion/subversion_core.cpp:266 #: vcs/subversion/subversion_core.cpp:268 #, fuzzy msgid "Commit to remote repository" msgstr "提交到仓库" #: vcs/subversion/subversion_core.cpp:268 msgid "From working copy" msgstr "" #: vcs/subversion/subversion_core.cpp:300 #: vcs/subversion/svn_logviewoptiondlgbase.ui:16 #, fuzzy, no-c-format msgid "Subversion Log View" msgstr "Subversion" #: vcs/subversion/subversion_core.cpp:320 #, fuzzy msgid "Subversion Blame" msgstr "Subversion 消息" #: vcs/subversion/subversion_core.cpp:509 #: vcs/subversion/subversion_core.cpp:538 #: vcs/subversion/subversion_core.cpp:598 #: vcs/subversion/subversion_core.cpp:668 msgid "" "If you have just have installed a new version of TDevelop, and the error " "message was 'unknown protocol kdevsvn+*', try restarting TDE." msgstr "" #: vcs/subversion/subversion_core.cpp:703 msgid "" "You do not have kompare installed. We recommend you install kompare to view " "differences graphically." msgstr "" #: vcs/subversion/subversion_core.cpp:715 #, fuzzy msgid "No subversion differences" msgstr "构建差异" #: vcs/subversion/subversion_fileinfo.cpp:160 msgid "Subversion File/Directory Status" msgstr "" #: vcs/subversion/subversion_part.cpp:86 msgid "Subversion Output" msgstr "Subversion 输出" #: vcs/subversion/subversion_part.cpp:87 vcs/subversion/subversion_part.cpp:261 msgid "Subversion" msgstr "Subversion" #: vcs/subversion/subversion_part.cpp:87 msgid "Subversion messages" msgstr "Subversion 消息" #: vcs/subversion/subversion_part.cpp:88 msgid "Subversion

    Subversion operations window." msgstr "Subversion

    Subversion 操作窗口。" #: vcs/subversion/subversion_part.cpp:101 #, fuzzy msgid "&Commit to Repository..." msgstr "提交到仓库(&C)" #: vcs/subversion/subversion_part.cpp:112 #: vcs/subversion/subversion_part.cpp:225 msgid "Add file to repository

    Adds file to repository." msgstr "添加文件到仓库

    向仓库中添加文件。" #: vcs/subversion/subversion_part.cpp:114 #, fuzzy msgid "Show logs..." msgstr "槽(&L)..." #: vcs/subversion/subversion_part.cpp:115 #, fuzzy msgid "Blame..." msgstr "文件&F)..." #: vcs/subversion/subversion_part.cpp:122 msgid "Update" msgstr "更新" #: vcs/subversion/subversion_part.cpp:123 #: vcs/subversion/subversion_part.cpp:241 msgid "Update

    Updates file(s) from repository." msgstr "更新

    从仓库中更新文件。" #: vcs/subversion/subversion_part.cpp:125 #, fuzzy msgid "&Diff to BASE" msgstr "和保存的文件的差异" #: vcs/subversion/subversion_part.cpp:126 #, fuzzy msgid "Diff to BASE" msgstr "和保存的文件的差异" #: vcs/subversion/subversion_part.cpp:127 msgid "Diff to disk

    Diff current file to the BASE checked out copy." msgstr "" #: vcs/subversion/subversion_part.cpp:129 msgid "&Diff to HEAD" msgstr "" #: vcs/subversion/subversion_part.cpp:130 msgid "Diff to HEAD" msgstr "" #: vcs/subversion/subversion_part.cpp:131 msgid "Diff HEAD

    Diff the current file to HEAD in svn." msgstr "" #: vcs/subversion/subversion_part.cpp:134 #, fuzzy msgid "&Revert" msgstr "返转" #: vcs/subversion/subversion_part.cpp:136 #: vcs/subversion/subversion_part.cpp:243 #, fuzzy msgid "Revert

    Undo local changes." msgstr "返转所有修改" #: vcs/subversion/subversion_part.cpp:149 #, fuzzy msgid "Re&solve Conflicting State" msgstr "删除范围

    删除当前选中的范围。" #: vcs/subversion/subversion_part.cpp:151 msgid "Resolve the conflicting state of a file after a merge" msgstr "" #: vcs/subversion/subversion_part.cpp:152 msgid "" "Resolve the conflicting state

    Remove the conflict state that can be " "set on a file after a merge failed." msgstr "" #: vcs/subversion/subversion_part.cpp:153 msgid "Switch this working copy to URL.." msgstr "" #: vcs/subversion/subversion_part.cpp:156 msgid "Copy this working copy to URL.." msgstr "" #: vcs/subversion/subversion_part.cpp:158 #, fuzzy msgid "Merge difference to working copy" msgstr "和仓库没有任何差别。" #: vcs/subversion/subversion_part.cpp:229 msgid "Show logs..

    View Logs" msgstr "" #: vcs/subversion/subversion_part.cpp:231 msgid "Blame 0:HEAD

    Show Annotate" msgstr "" #: vcs/subversion/subversion_part.cpp:235 msgid "Diff

    Diff file to local disk." msgstr "" #: vcs/subversion/subversion_part.cpp:238 #, fuzzy msgid "Diff

    Diff file to repository." msgstr "添加到仓库中

    添加文件到仓库中。" #: vcs/subversion/subversion_part.cpp:245 #, fuzzy msgid "Resolve

    Resolve conflicting state." msgstr "删除范围

    删除当前选中的范围。" #: vcs/subversion/subversion_part.cpp:247 msgid "Switch

    Switch working tree." msgstr "" #: vcs/subversion/subversion_part.cpp:249 msgid "Copy

    Copy from/between path/URLs" msgstr "" #: vcs/subversion/subversion_part.cpp:251 msgid "Merge

    Merge difference to working copy" msgstr "" #: vcs/subversion/subversion_part.cpp:304 #: vcs/subversion/subversion_part.cpp:345 msgid "Please select only one item for subversion switch" msgstr "" #: vcs/subversion/subversion_part.cpp:327 #, fuzzy msgid "The destination URL is invalid" msgstr "表达式无效。" #: vcs/subversion/subversion_part.cpp:337 msgid "Fail to conduct subversion switch. No action was selected" msgstr "" #: vcs/subversion/subversion_part.cpp:380 msgid "Please select only one item for subversion merge" msgstr "" #: vcs/subversion/subversion_part.cpp:462 msgid "Please select only one item for subversion log" msgstr "" #: vcs/subversion/subversion_part.cpp:481 msgid "Please select only one item to see annotate" msgstr "" #: vcs/subversion/subversion_part.cpp:486 #, fuzzy msgid "Select file to see blame" msgstr "选择子工程" #: vcs/subversion/subversion_part.cpp:504 #: vcs/subversion/subversion_part.cpp:514 #, fuzzy msgid "Select file or directory to see diff" msgstr "选择子工程" #: vcs/subversion/subversion_widget.cpp:38 #, fuzzy msgid "Notification" msgstr "无优化" #: vcs/subversion/subversion_widget.cpp:63 #, fuzzy msgid "Log History" msgstr "目录" #: vcs/subversion/subversion_widget.cpp:72 #, fuzzy msgid "Blame" msgstr "文件&F)..." #: vcs/subversion/subversion_widget.cpp:121 #, fuzzy msgid "Subversion Job Progress" msgstr "Subversion 消息" #: vcs/subversion/svn_blamewidget.cpp:36 #: vcs/subversion/svn_logviewwidget.cpp:51 #, fuzzy msgid "Rev" msgstr "红" #: vcs/subversion/svn_blamewidget.cpp:39 #, fuzzy msgid "Content" msgstr "连接" #: vcs/subversion/svn_blamewidget.cpp:91 #, fuzzy msgid "Select one file to view annotation" msgstr "选择子工程" #: vcs/subversion/svn_blamewidget.cpp:95 #, fuzzy msgid "files" msgstr "打开文件" #: vcs/subversion/svn_blamewidget.cpp:129 msgid "Select file from list to view annotation" msgstr "" #: vcs/subversion/svn_fileselectdlg_commit.cpp:41 #, fuzzy msgid "Select Files to Commit" msgstr "要载入的文件" #: vcs/subversion/svn_fileselectdlg_commit.cpp:43 #, fuzzy msgid "select" msgstr "选择(&S)" #: vcs/subversion/svn_fileselectdlg_commit.cpp:44 #, fuzzy msgid "status" msgstr "状态" #: vcs/subversion/svn_fileselectdlg_commit.cpp:45 msgid "URL to commit" msgstr "" #: vcs/subversion/svn_fileselectdlg_commit.cpp:119 msgid "No added/modified/deleted file(s) to commit" msgstr "" #: vcs/subversion/svn_logviewwidget.cpp:131 #, fuzzy msgid "Blame this revision" msgstr "版本" #: vcs/subversion/svn_logviewwidget.cpp:132 #, fuzzy msgid "Difference to previous revision" msgstr "不同版本间的差异(&D)" #: vcs/subversion/svn_logviewwidget.cpp:138 #: vcs/subversion/svn_logviewwidget.cpp:181 msgid "No revision was clicked" msgstr "" #: vcs/subversion/svn_logviewwidget.cpp:138 #: vcs/subversion/svn_logviewwidget.cpp:181 #, fuzzy msgid "error" msgstr "错误" #: vcs/subversion/svn_tdeio.cpp:277 #, c-format msgid "Username and Password for %1." msgstr "" #: vcs/subversion/svn_tdeio.cpp:1436 #, fuzzy msgid "Nothing to commit." msgstr "“%1”中未装入任何内容" #: vcs/subversion/svn_tdeio.cpp:1438 #, fuzzy, c-format msgid "Committed revision %1." msgstr "注释(&M):" #: vcs/subversion/svn_tdeio.cpp:1638 #, fuzzy, c-format msgid "Copied Revision %1" msgstr "注释(&M):" #: vcs/subversion/svn_tdeio.cpp:1641 #, fuzzy msgid "Copied" msgstr "编译器(&M)" #: vcs/subversion/svn_tdeio.cpp:1749 msgid "" "The certificate from the server could not be trusted automatically. Do you " "want to trust this certificate? " msgstr "" #: vcs/subversion/svn_tdeio.cpp:1954 #, fuzzy, c-format msgid "A (bin) %1" msgstr "在 %1 中显示" #: vcs/subversion/svn_tdeio.cpp:1956 vcs/subversion/svn_tdeio.cpp:1989 #, fuzzy, c-format msgid "A %1" msgstr "添加 %1" #: vcs/subversion/svn_tdeio.cpp:1959 msgid "Copied %1 " msgstr "" #: vcs/subversion/svn_tdeio.cpp:1963 vcs/subversion/svn_tdeio.cpp:1985 #, fuzzy, c-format msgid "D %1" msgstr "硬件 %1" #: vcs/subversion/svn_tdeio.cpp:1966 #, fuzzy, c-format msgid "Restored %1." msgstr "恢复(&R)" #: vcs/subversion/svn_tdeio.cpp:1969 #, fuzzy, c-format msgid "Reverted %1." msgstr "删除(&M)" #: vcs/subversion/svn_tdeio.cpp:1972 msgid "" "Failed to revert %1.\n" "Try updating instead." msgstr "" #: vcs/subversion/svn_tdeio.cpp:1975 #, fuzzy, c-format msgid "Resolved conflicted state of %1." msgstr "删除范围

    删除当前选中的范围。" #: vcs/subversion/svn_tdeio.cpp:1979 #, c-format msgid "Skipped missing target %1." msgstr "" #: vcs/subversion/svn_tdeio.cpp:1981 #, c-format msgid "Skipped %1." msgstr "" #: vcs/subversion/svn_tdeio.cpp:2034 #, c-format msgid "Exported external at revision %1." msgstr "" #: vcs/subversion/svn_tdeio.cpp:2036 #, fuzzy, c-format msgid "Exported revision %1." msgstr "展开缩写" #: vcs/subversion/svn_tdeio.cpp:2039 #, c-format msgid "Checked out external at revision %1." msgstr "" #: vcs/subversion/svn_tdeio.cpp:2041 #, c-format msgid "Checked out revision %1." msgstr "" #: vcs/subversion/svn_tdeio.cpp:2045 #, c-format msgid "Updated external to revision %1." msgstr "" #: vcs/subversion/svn_tdeio.cpp:2047 #, c-format msgid "Updated to revision %1." msgstr "" #: vcs/subversion/svn_tdeio.cpp:2050 #, fuzzy, c-format msgid "External at revision %1." msgstr "外部库" #: vcs/subversion/svn_tdeio.cpp:2052 #, fuzzy, c-format msgid "At revision %1." msgstr "版本 %1" #: vcs/subversion/svn_tdeio.cpp:2058 #, fuzzy msgid "External export complete." msgstr "外部工具" #: vcs/subversion/svn_tdeio.cpp:2060 msgid "Export complete." msgstr "" #: vcs/subversion/svn_tdeio.cpp:2063 #, fuzzy msgid "External checkout complete." msgstr "启用代码补全(&E)" #: vcs/subversion/svn_tdeio.cpp:2065 #, fuzzy msgid "Checkout complete." msgstr "提取来源(&F):" #: vcs/subversion/svn_tdeio.cpp:2068 #, fuzzy msgid "External update complete." msgstr "启用代码补全(&E)" #: vcs/subversion/svn_tdeio.cpp:2070 #, fuzzy msgid "Update complete." msgstr "更新选中的项目" #: vcs/subversion/svn_tdeio.cpp:2080 #, fuzzy, c-format msgid "Fetching external item into %1." msgstr "在外部终端里启动" #: vcs/subversion/svn_tdeio.cpp:2084 #, c-format msgid "Status against revision: %1." msgstr "" #: vcs/subversion/svn_tdeio.cpp:2087 #, c-format msgid "Performing status on external item at %1." msgstr "" #: vcs/subversion/svn_tdeio.cpp:2090 #, fuzzy, c-format msgid "Sending %1" msgstr "装入:%1" #: vcs/subversion/svn_tdeio.cpp:2094 #, fuzzy, c-format msgid "Adding (bin) %1." msgstr "添加文件:%1" #: vcs/subversion/svn_tdeio.cpp:2096 #, fuzzy, c-format msgid "Adding %1." msgstr "添加 %1" #: vcs/subversion/svn_tdeio.cpp:2100 #, c-format msgid "Deleting %1." msgstr "" #: vcs/subversion/svn_tdeio.cpp:2103 #, fuzzy, c-format msgid "Replacing %1." msgstr "正在读取文件“%1”..." #: vcs/subversion/svn_tdeio.cpp:2108 msgid "Transmitting file data " msgstr "" #: vcs/subversion/svn_tdeio.cpp:2116 #, c-format msgid "Blame %1." msgstr "" #: buildtools/ada/adaproject_optionsdlgbase.ui:64 #, no-c-format msgid "Configuration:" msgstr "配置:" #: buildtools/ada/adaproject_optionsdlgbase.ui:170 #, no-c-format msgid "Compiler &options:" msgstr "编译器选项(&O):" #: buildtools/ada/adaproject_optionsdlgbase.ui:189 #, no-c-format msgid "Ada &compiler:" msgstr "Ada 编译器(&C):" #: buildtools/ada/adaproject_optionsdlgbase.ui:223 #: buildtools/pascal/pascalproject_optionsdlgbase.ui:208 #, no-c-format msgid "Compiler co&mmand:" msgstr "编译器命令(&M):" #: buildtools/ada/adaproject_optionsdlgbase.ui:304 #: buildtools/pascal/pascalproject_optionsdlgbase.ui:331 #, no-c-format msgid "Main &source file:" msgstr "主源文件(&S):" #: buildtools/ada/adaproject_optionsdlgbase.ui:349 #, no-c-format msgid "Load Default Compiler Options" msgstr "载入默认的编译器选项" #: buildtools/ant/antoptionswidget.ui:22 #, no-c-format msgid "Quiet" msgstr "安静" #: buildtools/ant/antoptionswidget.ui:78 #, no-c-format msgid "&Build file:" msgstr "构建文件(&B):" #: buildtools/ant/antoptionswidget.ui:89 #, no-c-format msgid "&Verbosity:" msgstr "详细程度(&V):" #: buildtools/ant/antoptionswidget.ui:100 #: buildtools/autotools/addservicedlgbase.ui:406 #, no-c-format msgid "&Properties:" msgstr "属性(&P):" #: buildtools/ant/classpathwidget.ui:24 #, no-c-format msgid "Class&path" msgstr "Class&path" #: buildtools/autotools/addapplicationdlgbase.ui:16 #, no-c-format msgid "Add New Application .desktop File" msgstr "添加新应用程序 .desktop 文件" #: buildtools/autotools/addapplicationdlgbase.ui:30 #, no-c-format msgid "&Application File" msgstr "应用程序文件(&A)" #: buildtools/autotools/addapplicationdlgbase.ui:41 #, no-c-format msgid "Start in t&erminal" msgstr "在终端里启动(&E)" #: buildtools/autotools/addapplicationdlgbase.ui:122 #, no-c-format msgid "Games" msgstr "游戏" #: buildtools/autotools/addapplicationdlgbase.ui:127 #, no-c-format msgid "Development" msgstr "开发" #: buildtools/autotools/addapplicationdlgbase.ui:132 #: vcs/cvsservice/editorsdialogbase.ui:16 #, no-c-format msgid "Editors" msgstr "编辑器" #: buildtools/autotools/addapplicationdlgbase.ui:137 #, no-c-format msgid "Graphics" msgstr "图形" #: buildtools/autotools/addapplicationdlgbase.ui:142 #, no-c-format msgid "Internet" msgstr "Internet" #: buildtools/autotools/addapplicationdlgbase.ui:147 #, no-c-format msgid "Multimedia" msgstr "多媒体" #: buildtools/autotools/addapplicationdlgbase.ui:152 #, no-c-format msgid "Office" msgstr "办公" #: buildtools/autotools/addapplicationdlgbase.ui:157 #: kdevdesigner/designer/formsettings.ui:149 #: languages/cpp/ccconfigwidgetbase.ui:1339 #, no-c-format msgid "Settings" msgstr "设置" #: buildtools/autotools/addapplicationdlgbase.ui:162 #, no-c-format msgid "System" msgstr "系统" #: buildtools/autotools/addapplicationdlgbase.ui:167 #, no-c-format msgid "Toys" msgstr "玩具" #: buildtools/autotools/addapplicationdlgbase.ui:172 #, no-c-format msgid "Utilities" msgstr "实用工具" #: buildtools/autotools/addapplicationdlgbase.ui:177 #, no-c-format msgid "WordProcessing" msgstr "文字处理" #: buildtools/autotools/addapplicationdlgbase.ui:193 #: parts/valgrind/dialog_widget.ui:187 parts/valgrind/dialog_widget.ui:261 #, no-c-format msgid "E&xecutable:" msgstr "可执行文件(&X):" #: buildtools/autotools/addapplicationdlgbase.ui:211 #: buildtools/autotools/addservicedlgbase.ui:55 #, no-c-format msgid "&Icon:" msgstr "图标(&I):" #: buildtools/autotools/addapplicationdlgbase.ui:229 #, no-c-format msgid "&Section:" msgstr "节(&S):" #: buildtools/autotools/addapplicationdlgbase.ui:283 #: buildtools/autotools/addservicedlgbase.ui:193 #: kdevdesigner/designer/formsettings.ui:210 #: vcs/cvsservice/integrator/integratordlgbase.ui:220 #, no-c-format msgid "Co&mment:" msgstr "注释(&M):" #: buildtools/autotools/addapplicationdlgbase.ui:316 #, no-c-format msgid "Mime &Types" msgstr "MIME 类型(&T)" #: buildtools/autotools/addapplicationdlgbase.ui:385 #: buildtools/autotools/addservicedlgbase.ui:289 #: src/profileengine/editor/profileeditorbase.ui:349 #: src/profileengine/editor/profileeditorbase.ui:391 #, no-c-format msgid "<-" msgstr "<-" #: buildtools/autotools/addapplicationdlgbase.ui:393 #: buildtools/autotools/addservicedlgbase.ui:297 #: src/profileengine/editor/profileeditorbase.ui:489 #: src/profileengine/editor/profileeditorbase.ui:497 #, no-c-format msgid "->" msgstr "->" #: buildtools/autotools/addexistingdlgbase.ui:24 #, no-c-format msgid "ImportExistingDlgBase" msgstr "ImportExistingDlgBase" #: buildtools/autotools/addexistingdlgbase.ui:109 #: buildtools/autotools/addfiledlgbase.ui:53 #: buildtools/autotools/removefiledlgbase.ui:140 #: buildtools/autotools/removetargetdlgbase.ui:27 #, no-c-format msgid "Subproject Information" msgstr "子工程信息" #: buildtools/autotools/addexistingdlgbase.ui:143 #: buildtools/autotools/addfiledlgbase.ui:103 #: buildtools/autotools/removefiledlgbase.ui:179 #: buildtools/autotools/removetargetdlgbase.ui:74 #, no-c-format msgid "Directory:" msgstr "目录:" #: buildtools/autotools/addexistingdlgbase.ui:163 #: buildtools/autotools/addfiledlgbase.ui:123 #: buildtools/autotools/choosetargetdlgbase.ui:114 #: buildtools/autotools/removefiledlgbase.ui:199 #: buildtools/autotools/removetargetdlgbase.ui:94 #, no-c-format msgid "Target:" msgstr "目标:" #: buildtools/autotools/addexistingdlgbase.ui:192 #, no-c-format msgid "[DIRECTORY]" msgstr "[目录]" #: buildtools/autotools/addexistingdlgbase.ui:200 #: buildtools/autotools/choosetargetdlgbase.ui:130 #, no-c-format msgid "[TARGET]" msgstr "[目标]" #: buildtools/autotools/addexistingdlgbase.ui:260 #, no-c-format msgid "A&dd All" msgstr "全部添加(&D)" #: buildtools/autotools/addexistingdlgbase.ui:263 #, no-c-format msgid "Import by creating symbolic links (recommended)" msgstr "通过创建符号链接来导入(推荐)" #: buildtools/autotools/addexistingdlgbase.ui:271 #, no-c-format msgid "&Add Selected" msgstr "添加所选(&A)" #: buildtools/autotools/addexistingdlgbase.ui:274 #, no-c-format msgid "Import by copying (not recommended)" msgstr "通过复制来导入(不推荐)" #: buildtools/autotools/addexistingdlgbase.ui:313 #, no-c-format msgid "&Source Directory" msgstr "源代码目录(&S)" #: buildtools/autotools/addexistingdlgbase.ui:364 #, no-c-format msgid "R&emove All" msgstr "全部移除(&E)" #: buildtools/autotools/addexistingdlgbase.ui:367 #, no-c-format msgid "Removes all added files." msgstr "移除添加的所有文件。" #: buildtools/autotools/addexistingdlgbase.ui:375 #, no-c-format msgid "&Remove Selected" msgstr "移除所选(&R)" #: buildtools/autotools/addexistingdlgbase.ui:378 #, no-c-format msgid "Removes the selected files." msgstr "移除所有选中的文件。" #: buildtools/autotools/addexistingdlgbase.ui:417 #, no-c-format msgid "Add &Following" msgstr "添加下列(&F)" #: buildtools/autotools/addfiledlgbase.ui:36 #, no-c-format msgid "Add New Created File to Target" msgstr "将新建的文件加入到目标" #: buildtools/autotools/addfiledlgbase.ui:75 #: buildtools/autotools/removetargetdlgbase.ui:46 #, no-c-format msgid "[TARGET DIRECTORY]" msgstr "[目标目录]" #: buildtools/autotools/addfiledlgbase.ui:83 #: buildtools/autotools/removefiledlgbase.ui:159 #: buildtools/autotools/removetargetdlgbase.ui:54 #, no-c-format msgid "[TARGET NAME]" msgstr "[目标名称]" #: buildtools/autotools/addfiledlgbase.ui:135 #, no-c-format msgid "File Information" msgstr "文件信息" #: buildtools/autotools/addfiledlgbase.ui:202 #, no-c-format msgid "New file &name (with extension):" msgstr "新文件名(和扩展名)(&N):" #: buildtools/autotools/addicondlgbase.ui:16 #, no-c-format msgid "Add New Icon" msgstr "添加新图标" #: buildtools/autotools/addicondlgbase.ui:35 #: kdevdesigner/designer/editfunctions.ui:481 #, no-c-format msgid "&Type:" msgstr "类型(&T):" #: buildtools/autotools/addicondlgbase.ui:53 #, no-c-format msgid "&Size:" msgstr "大小(&S):" #: buildtools/autotools/addicondlgbase.ui:76 #: parts/quickopen/quickopenfunctionchooseformbase.ui:86 #, no-c-format msgid "File name:" msgstr "文件名:" #: buildtools/autotools/addicondlgbase.ui:178 #, no-c-format msgid "unknown" msgstr "未知" #: buildtools/autotools/addservicedlgbase.ui:16 #, no-c-format msgid "Add New Service" msgstr "添加新服务" #: buildtools/autotools/addservicedlgbase.ui:31 #, no-c-format msgid "&Service File" msgstr "服务文件(&S)" #: buildtools/autotools/addservicedlgbase.ui:139 #, no-c-format msgid "&Library:" msgstr "库(&L):" #: buildtools/autotools/addservicedlgbase.ui:209 #, no-c-format msgid "Service &Types" msgstr "服务类型(&T)" #: buildtools/autotools/addsubprojectdlgbase.ui:36 #, no-c-format msgid "Add New Subproject" msgstr "添加新的子工程" #: buildtools/autotools/addsubprojectdlgbase.ui:47 #, no-c-format msgid "Subproject" msgstr "子工程" #: buildtools/autotools/addsubprojectdlgbase.ui:87 #, no-c-format msgid "Subproject &name:" msgstr "子工程名称(&N):" #: buildtools/autotools/addtargetdlgbase.ui:16 #, no-c-format msgid "Add New Target" msgstr "添加新目标" #: buildtools/autotools/addtargetdlgbase.ui:30 #, no-c-format msgid "&Target" msgstr "目标(&T)" #: buildtools/autotools/addtargetdlgbase.ui:45 #, no-c-format msgid "&Primary:" msgstr "主体(&P):" #: buildtools/autotools/addtargetdlgbase.ui:68 #, no-c-format msgid "Pre&fix:" msgstr "前缀(&F):" #: buildtools/autotools/addtargetdlgbase.ui:127 #, no-c-format msgid "[CANONICALIZED NAME]" msgstr "[规范化名称]" #: buildtools/autotools/addtargetdlgbase.ui:170 #, no-c-format msgid "Linker Flags (&LDFLAGS)" msgstr "连接标志 (&LDFLAGS)" #: buildtools/autotools/addtargetdlgbase.ui:181 #, no-c-format msgid "Do not link against shared libraries (-all-static)" msgstr "不连接共享库 (-all-static)" #: buildtools/autotools/addtargetdlgbase.ui:189 #, no-c-format msgid "Do not assign version numbers to libraries (-avoid-version)" msgstr "不给库指定版本号码 (-avoid-version)" #: buildtools/autotools/addtargetdlgbase.ui:197 #, no-c-format msgid "Create a library that can be dynamically loaded (-module)" msgstr "创建可被动态载入的库 (-module)" #: buildtools/autotools/addtargetdlgbase.ui:205 #, no-c-format msgid "Library does not depend on external symbols (-no-undefined)" msgstr "不依赖外部符号的库 (-no-undefined)" #: buildtools/autotools/addtargetdlgbase.ui:228 #, no-c-format msgid "Ot&her:" msgstr "其它(&H):" #: buildtools/autotools/choosetargetdlgbase.ui:59 #, no-c-format msgid "Add new files to m&y active target" msgstr "将新文件添加到我当前的目标(&Y)" #: buildtools/autotools/choosetargetdlgbase.ui:70 #, no-c-format msgid "Choose &another target" msgstr "选择另一个目标(&A)" #: buildtools/autotools/choosetargetdlgbase.ui:83 #, no-c-format msgid "Choose &Target" msgstr "选择目标(&T)" #: buildtools/autotools/choosetargetdlgbase.ui:140 #, no-c-format msgid "&New Files" msgstr "新建文件(&N)" #: buildtools/autotools/choosetargetdlgbase.ui:159 #, no-c-format msgid "" "Note: If you cancel, your files will be created but will not be added to the project." msgstr "" "注意:如果您取消的话,您的文件将被创建,但是不会被添加到工程" "中。" #: buildtools/autotools/choosetargetdlgbase.ui:172 #, no-c-format msgid "Do ¬ ask me again and use always my active target" msgstr "以后不再询问,总是使用我的活动目标(&N)" #: buildtools/autotools/configureoptionswidgetbase.ui:46 #, fuzzy, no-c-format msgid "&Configuration:" msgstr "配置:" #: buildtools/autotools/configureoptionswidgetbase.ui:68 #, fuzzy, no-c-format msgid "Different build profiles" msgstr "和保存的文件的差异" #: buildtools/autotools/configureoptionswidgetbase.ui:71 #, fuzzy, no-c-format msgid "profiles" msgstr "打开文件" #: buildtools/autotools/configureoptionswidgetbase.ui:141 #: parts/astyle/astyleconfig.ui:47 #, no-c-format msgid "&General" msgstr "常规(&G)" #: buildtools/autotools/configureoptionswidgetbase.ui:152 #: buildtools/autotools/configureoptionswidgetbase.ui:155 #, no-c-format msgid "Options to pass to configure, e.g. --prefix=" msgstr "" #: buildtools/autotools/configureoptionswidgetbase.ui:163 #, no-c-format msgid "&Build directory (must be different for every different configuration):" msgstr "构建目录(所有的配置中不能重复)(&B):" #: buildtools/autotools/configureoptionswidgetbase.ui:191 #, fuzzy, no-c-format msgid "Top source &directory:" msgstr "顶层源代码目录(&T):" #: buildtools/autotools/configureoptionswidgetbase.ui:202 #: buildtools/autotools/configureoptionswidgetbase.ui:217 #, no-c-format msgid "" "The build process will place the object\n" "files and binary in this directory. \n" "\n" "If the name does not have a leading /\n" "then it is relative to the project directory.\n" "(in the General page)\n" "\n" "The build process also checks here for \n" "a Makefile and a configure script.\n" "\n" "If you have imported a project and you were \n" "building in the project directory, you \n" "probably want this to be blank." msgstr "" #: buildtools/autotools/configureoptionswidgetbase.ui:294 #: buildtools/autotools/configureoptionswidgetbase.ui:300 #, no-c-format msgid "" "Where to start looking for the src files.\n" "If the name does not have a leading /\n" "then it is relative to the project directory.\n" "(in the General page)" msgstr "" #: buildtools/autotools/configureoptionswidgetbase.ui:328 #: buildtools/autotools/targetoptionsdlgbase.ui:49 #, no-c-format msgid "Li&nker flags (LDFLAGS):" msgstr "连接器选项 (LDFLAGS)(&N):" #: buildtools/autotools/configureoptionswidgetbase.ui:334 #: buildtools/autotools/configureoptionswidgetbase.ui:360 #: buildtools/autotools/configureoptionswidgetbase.ui:364 #, no-c-format msgid "" "Linker flags, e.g. -L if you have libraries in a\n" "nonstandard directory " msgstr "" "连接开关,例如 -L<库目录> 如果使用非标准\n" "库目录中的库 <库目录>" #: buildtools/autotools/configureoptionswidgetbase.ui:373 #: buildtools/autotools/configureoptionswidgetbase.ui:377 #: buildtools/autotools/configureoptionswidgetbase.ui:409 #, no-c-format msgid "" "C/C++ preprocessor flags, e.g. -I if you have\n" "headers in a nonstandard directory " msgstr "" "C/C++预处理开关,例如 -I<头文件目录> 如果您使用非标准\n" "头文件目录中的头文件 <头文件目录>" #: buildtools/autotools/configureoptionswidgetbase.ui:403 #, no-c-format msgid "C/C++ &preprocessor flags (CPPFLAGS):" msgstr "C/C++ 预处理器标志(CPPFLAGS)(&P):" #: buildtools/autotools/configureoptionswidgetbase.ui:418 #, no-c-format msgid "Configure argu&ments:" msgstr "配置参数(&M):" #: buildtools/autotools/configureoptionswidgetbase.ui:437 #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:318 #: buildtools/custommakefiles/customotherconfigwidgetbase.ui:231 #: buildtools/lib/widgets/makeoptionswidgetbase.ui:43 #: buildtools/lib/widgets/runoptionswidgetbase.ui:209 #, no-c-format msgid "Environment &Variables" msgstr "环境变量(&V)" #: buildtools/autotools/configureoptionswidgetbase.ui:452 #, no-c-format msgid "C" msgstr "C" #: buildtools/autotools/configureoptionswidgetbase.ui:463 #, no-c-format msgid "C com&piler:" msgstr "C 编译器(&P):" #: buildtools/autotools/configureoptionswidgetbase.ui:496 #, no-c-format msgid "Compiler f&lags (CFLAGS):" msgstr "编译器标志(CFLAGS)(&L):" #: buildtools/autotools/configureoptionswidgetbase.ui:551 #, no-c-format msgid "Compiler co&mmand (CC):" msgstr "编译器命令(CC)(&M):" #: buildtools/autotools/configureoptionswidgetbase.ui:586 #, no-c-format msgid "C++" msgstr "C++" #: buildtools/autotools/configureoptionswidgetbase.ui:597 #, no-c-format msgid "C++ com&piler:" msgstr "C++ 编译器(&P):" #: buildtools/autotools/configureoptionswidgetbase.ui:630 #, no-c-format msgid "Compiler co&mmand (CXX):" msgstr "编译器命令(CXX)(&M):" #: buildtools/autotools/configureoptionswidgetbase.ui:663 #, fuzzy, no-c-format msgid "Compiler flags (C&XXFLAGS):" msgstr "编译器标志(CXXFLAGS)(&L):" #: buildtools/autotools/configureoptionswidgetbase.ui:720 #, fuzzy, no-c-format msgid "F&ortran" msgstr "Fortran" #: buildtools/autotools/configureoptionswidgetbase.ui:731 #, fuzzy, no-c-format msgid "Fortra&n compiler:" msgstr "Fortran 编译器(&P):" #: buildtools/autotools/configureoptionswidgetbase.ui:764 #, no-c-format msgid "Compiler co&mmand (F77):" msgstr "编译器命令(F77)(&M):" #: buildtools/autotools/configureoptionswidgetbase.ui:797 #, no-c-format msgid "Compiler f&lags (FFLAGS):" msgstr "编译器标志(FFLAGS)(&L):" #: buildtools/autotools/managecustomcommandsbase.ui:44 #, no-c-format msgid "Menu Text" msgstr "菜单文本" #: buildtools/autotools/managecustomcommandsbase.ui:52 #, no-c-format msgid "Command" msgstr "命令" #: buildtools/autotools/managecustomcommandsbase.ui:60 #, no-c-format msgid "Command Type" msgstr "命令类型" #: buildtools/autotools/removefiledlgbase.ui:16 #, no-c-format msgid "Remove File From This Target" msgstr "从此目标中删除文件" #: buildtools/autotools/removefiledlgbase.ui:79 #, no-c-format msgid "&File Information" msgstr "文件信息(&F)" #: buildtools/autotools/removefiledlgbase.ui:98 #: buildtools/autotools/removetargetdlgbase.ui:127 #: buildtools/lib/widgets/removesubprojectdlgbase.ui:53 #, no-c-format msgid "[REMOVE QUESTION]" msgstr "[删除的问题]" #: buildtools/autotools/removefiledlgbase.ui:106 #: buildtools/autotools/removetargetdlgbase.ui:135 #: buildtools/lib/widgets/removesubprojectdlgbase.ui:61 #, no-c-format msgid "Also &remove it from disk" msgstr "同时也从磁盘上删除文件(&R)" #: buildtools/autotools/removefiledlgbase.ui:120 #, no-c-format msgid "Note: You will not be able to undelete the file." msgstr "注意:您将无法再恢复这个文件。" #: buildtools/autotools/removefiledlgbase.ui:215 #, no-c-format msgid "[DIRECTORY NAME]" msgstr "[目录名]" #: buildtools/autotools/removetargetdlgbase.ui:16 #, no-c-format msgid "Remove Target From [SUBPROJECT]" msgstr "从 [子工程] 删除目标" #: buildtools/autotools/removetargetdlgbase.ui:116 #, no-c-format msgid "&Target Information" msgstr "目标信息(&T)" #: buildtools/autotools/removetargetdlgbase.ui:149 #, no-c-format msgid "" "Note: You will not be able to undo this operation. Please check your " "Makefile.am afterwards." msgstr "注意:您将无法再撤消此操作。并且随后请检查您的 Makefile.am。" #: buildtools/autotools/removetargetdlgbase.ui:159 #, no-c-format msgid "&Dependencies to Other Subprojects" msgstr "对其它子工程的依赖性(&D)" #: buildtools/autotools/subprojectoptionsdlgbase.ui:16 #, no-c-format msgid "Subproject Options" msgstr "子工程选项" #: buildtools/autotools/subprojectoptionsdlgbase.ui:31 #, no-c-format msgid "Co&mpiler" msgstr "编译器(&M)" #: buildtools/autotools/subprojectoptionsdlgbase.ui:46 #, no-c-format msgid "Compiler flags for C compiler (CFLA&GS):" msgstr "C 编译器的编译标志(CFLAGS)(&G):" #: buildtools/autotools/subprojectoptionsdlgbase.ui:129 #, no-c-format msgid "Compiler flags for C++ compiler (C&XXFLAGS):" msgstr "C++ 编译器的编译标志 (C&XXFLAGS):" #: buildtools/autotools/subprojectoptionsdlgbase.ui:204 #, no-c-format msgid "Compiler flags for Fortran compiler (&FFLAGS):" msgstr "Fortran 编译器的编译标志 (&FFLAGS):" #: buildtools/autotools/subprojectoptionsdlgbase.ui:277 #, no-c-format msgid "&Includes" msgstr "包含(&I)" #: buildtools/autotools/subprojectoptionsdlgbase.ui:296 #, no-c-format msgid "Automatically &generate metasources" msgstr "自动生成 metasources(&G)" #: buildtools/autotools/subprojectoptionsdlgbase.ui:379 #, no-c-format msgid "Directories in&side project:" msgstr "工程内的目录(&S):" #: buildtools/autotools/subprojectoptionsdlgbase.ui:447 #: buildtools/autotools/subprojectoptionsdlgbase.ui:633 #: buildtools/autotools/targetoptionsdlgbase.ui:415 #: kdevdesigner/designer/pixmapcollectioneditor.ui:83 #: languages/cpp/ccconfigwidgetbase.ui:428 #: parts/abbrev/abbrevconfigwidgetbase.ui:111 #: parts/ctags2/ctags2_settingswidgetbase.ui:270 #: parts/documentation/docglobalconfigwidgetbase.ui:74 #: parts/tools/toolsconfigwidgetbase.ui:81 #: parts/tools/toolsconfigwidgetbase.ui:185 #: parts/tools/toolsconfigwidgetbase.ui:289 #, no-c-format msgid "&Add..." msgstr "添加(&A)..." #: buildtools/autotools/subprojectoptionsdlgbase.ui:455 #: buildtools/autotools/subprojectoptionsdlgbase.ui:641 #: buildtools/autotools/targetoptionsdlgbase.ui:423 #: parts/documentation/docglobalconfigwidgetbase.ui:82 #: parts/regexptest/regexptestdlgbase.ui:221 #, no-c-format msgid "&Edit..." msgstr "编辑(&E)..." #: buildtools/autotools/subprojectoptionsdlgbase.ui:471 #, no-c-format msgid "Move U&p" msgstr "上移(&P)" #: buildtools/autotools/subprojectoptionsdlgbase.ui:479 #: buildtools/autotools/targetoptionsdlgbase.ui:447 #, no-c-format msgid "Move Dow&n" msgstr "下移(&N)" #: buildtools/autotools/subprojectoptionsdlgbase.ui:510 #, no-c-format msgid "Directories ou&tside project:" msgstr "工程外的目录(&T):" #: buildtools/autotools/subprojectoptionsdlgbase.ui:546 #, no-c-format msgid "&Prefixes" msgstr "前缀(&P)" #: buildtools/autotools/subprojectoptionsdlgbase.ui:594 #, no-c-format msgid "C&ustom prefixes:" msgstr "自定义前缀(&U):" #: buildtools/autotools/subprojectoptionsdlgbase.ui:678 #, no-c-format msgid "&Build Order" msgstr "构建顺序(&B)" #: buildtools/autotools/subprojectoptionsdlgbase.ui:775 #, no-c-format msgid "O&rder in which sub projects are built:" msgstr "编译子工程的顺序(&R):" #: buildtools/autotools/targetoptionsdlgbase.ui:16 #, no-c-format msgid "Target Options" msgstr "目标选项" #: buildtools/autotools/targetoptionsdlgbase.ui:34 #, fuzzy, no-c-format msgid "Fl&ags" msgstr "标志" #: buildtools/autotools/targetoptionsdlgbase.ui:71 #, fuzzy, no-c-format msgid "&Do not link against shared libraries (-all-static)" msgstr "不连接共享库 (-all-static)" #: buildtools/autotools/targetoptionsdlgbase.ui:79 #, fuzzy, no-c-format msgid "Do not &assign version numbers to libraries (-avoid-version)" msgstr "不给库指定版本号码 (-avoid-version)" #: buildtools/autotools/targetoptionsdlgbase.ui:87 #, fuzzy, no-c-format msgid "Create a library that can &be dynamically loaded (-module)" msgstr "创建可被动态载入的库 (-module)" #: buildtools/autotools/targetoptionsdlgbase.ui:95 #, fuzzy, no-c-format msgid "Library does not depend on external symbols (-no-&undefined)" msgstr "不依赖外部符号的库 (-no-undefined)" #: buildtools/autotools/targetoptionsdlgbase.ui:118 #, no-c-format msgid "O&ther:" msgstr "其它(&T):" #: buildtools/autotools/targetoptionsdlgbase.ui:181 #, fuzzy, no-c-format msgid "E&xplicit dependencies (DEPENDENCIES):" msgstr "明确的依赖关系(DEPENDENCIES)(&E):" #: buildtools/autotools/targetoptionsdlgbase.ui:228 #, fuzzy, no-c-format msgid "Li&braries" msgstr "库" #: buildtools/autotools/targetoptionsdlgbase.ui:243 #, fuzzy, no-c-format msgid "Lin&k convenience libraries inside project (LIBADD):" msgstr "连接工程之内的库 (LIBADD)(&S):" #: buildtools/autotools/targetoptionsdlgbase.ui:294 #, no-c-format msgid "Link libraries ou&tside project (LIBADD):" msgstr "连接工程之外的库 (LIBADD)(&T):" #: buildtools/autotools/targetoptionsdlgbase.ui:439 #, fuzzy, no-c-format msgid "Mo&ve Up" msgstr "上移(&U)" #: buildtools/autotools/targetoptionsdlgbase.ui:476 #, no-c-format msgid "Ar&guments" msgstr "参数(&G)" #: buildtools/autotools/targetoptionsdlgbase.ui:487 #, fuzzy, no-c-format msgid "Program Arguments (only valid for executable targets)" msgstr "运行参数(只对运行的平台有效)(&R):" #: buildtools/autotools/targetoptionsdlgbase.ui:507 #, fuzzy, no-c-format msgid "&Run arguments:" msgstr "参数(&G):" #: buildtools/autotools/targetoptionsdlgbase.ui:523 #: buildtools/qmake/projectconfigurationdlgbase.ui:321 #: languages/ruby/rubyconfigwidgetbase.ui:141 #, fuzzy, no-c-format msgid "Working Directory:" msgstr "目录:" #: buildtools/autotools/targetoptionsdlgbase.ui:535 #, fuzzy, no-c-format msgid "&Debug arguments:" msgstr "调试版标志(&D):" #: buildtools/custommakefiles/custombuildoptionswidgetbase.ui:16 #, no-c-format msgid "Custom Build Options" msgstr "自定义构建选项" #: buildtools/custommakefiles/custombuildoptionswidgetbase.ui:27 #, no-c-format msgid "Build Tool" msgstr "构建工具" #: buildtools/custommakefiles/custombuildoptionswidgetbase.ui:38 #, no-c-format msgid "&Make" msgstr "&Make" #: buildtools/custommakefiles/custombuildoptionswidgetbase.ui:49 #, fuzzy, no-c-format msgid "A&nt" msgstr "&Ant" #: buildtools/custommakefiles/custombuildoptionswidgetbase.ui:57 #, fuzzy, no-c-format msgid "Other" msgstr "其它" #: buildtools/custommakefiles/custombuildoptionswidgetbase.ui:63 #, no-c-format msgid "other custom build tool, e.g. script" msgstr "" #: buildtools/custommakefiles/custombuildoptionswidgetbase.ui:66 #, no-c-format msgid "" "There are myriads of buildtools out there that are not ant or make. If you " "use one of them (or have your own scripts), select this option." msgstr "" #: buildtools/custommakefiles/custombuildoptionswidgetbase.ui:93 #, fuzzy, no-c-format msgid "Run &the build tool in the following directory:" msgstr "在如下目录里运行编译工具(&D):" #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:27 #, no-c-format msgid "A&bort on first error" msgstr "遇到第一个错误时中止(&A)" #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:35 #, no-c-format msgid "Only di&splay commands without actually executing them" msgstr "只显示要执行的命令但并不实际执行(&S)" #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:61 #, no-c-format msgid "A&dditional make options:" msgstr "附加 make 选项(&D):" #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:77 #, no-c-format msgid "Name of make e&xecutable:" msgstr "make 执行文件的名称(&X):" #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:88 #, no-c-format msgid "Default make &target:" msgstr "默认 make 目标(&T):" #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:109 #, no-c-format msgid "Run multiple jobs" msgstr "" #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:120 #, no-c-format msgid "Number of simultaneous &jobs:" msgstr "同时执行的任务个数(&J):" #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:180 #, no-c-format msgid "Make &priority:" msgstr "Make 优先级(&P):" #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:248 #: buildtools/custommakefiles/customotherconfigwidgetbase.ui:161 #, no-c-format msgid "E&nvironment:" msgstr "环境变量(&N):" #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:286 #, no-c-format msgid "Co&py" msgstr "复制(&P)" #: buildtools/custommakefiles/custommakeconfigwidgetbase.ui:297 #: buildtools/custommakefiles/customotherconfigwidgetbase.ui:210 #, no-c-format msgid "Re&move" msgstr "删除(&M)" #: buildtools/custommakefiles/custommanagerwidgetbase.ui:16 #, fuzzy, no-c-format msgid "Custom Manager Options" msgstr "自定义选项" #: buildtools/custommakefiles/custommanagerwidgetbase.ui:35 #, fuzzy, no-c-format msgid "Filetypes used in Project" msgstr "工程中的目标文件" #: buildtools/custommakefiles/custommanagerwidgetbase.ui:41 #, no-c-format msgid "" "Add filetypes to be used in Projects, can be full filenames or shell " "wildcards" msgstr "" #: buildtools/custommakefiles/custommanagerwidgetbase.ui:44 #, no-c-format msgid "" "Each entry contains a filetype used in the project in the form of a filename " "or a filename wildcard (using shell wildcards). \n" "This will be used when adding/removing files in directories and re-" "populating the project" msgstr "" #: buildtools/custommakefiles/customotherconfigwidgetbase.ui:45 #, fuzzy, no-c-format msgid "Add&itional options:" msgstr "附加选项" #: buildtools/custommakefiles/customotherconfigwidgetbase.ui:61 #, fuzzy, no-c-format msgid "Name of build &script" msgstr "文件名" #: buildtools/custommakefiles/customotherconfigwidgetbase.ui:72 #, fuzzy, no-c-format msgid "Default &target:" msgstr "默认 make 目标(&T):" #: buildtools/custommakefiles/customotherconfigwidgetbase.ui:93 #, fuzzy, no-c-format msgid "Run with priority:" msgstr "与仓库同步" #: buildtools/custommakefiles/selectnewfilesdialogbase.ui:24 #, fuzzy, no-c-format msgid "Files to add to the Project:" msgstr "为此工程加载的插件" #: buildtools/custommakefiles/selectnewfilesdialogbase.ui:38 #, fuzzy, no-c-format msgid "Select the files to add to the project" msgstr "将选中文件加入到工程" #: buildtools/custommakefiles/selectnewfilesdialogbase.ui:41 #, no-c-format msgid "" "Select the files and directories that should be added to the list of project " "files. All other files and directories will be put into the blacklist." msgstr "" #: buildtools/lib/parsers/autotools/tests/viewerbase.ui:16 #: buildtools/lib/parsers/qmake/tests/viewerbase.ui:16 #, no-c-format msgid "Viewer" msgstr "查看器" #: buildtools/lib/parsers/autotools/tests/viewerbase.ui:60 #: buildtools/lib/parsers/qmake/tests/viewerbase.ui:137 #, no-c-format msgid "Parse Tree" msgstr "分析树" #: buildtools/lib/parsers/autotools/tests/viewerbase.ui:80 #: buildtools/lib/parsers/qmake/tests/viewerbase.ui:157 #, no-c-format msgid "Value 1" msgstr "值 1" #: buildtools/lib/parsers/autotools/tests/viewerbase.ui:91 #: buildtools/lib/parsers/qmake/tests/viewerbase.ui:168 #, no-c-format msgid "Value 2" msgstr "值 2" #: buildtools/lib/parsers/autotools/tests/viewerbase.ui:111 #: buildtools/lib/parsers/qmake/tests/viewerbase.ui:199 #, no-c-format msgid "Source to Be Written Back" msgstr "" #: buildtools/lib/parsers/autotools/tests/viewerbase.ui:149 #: buildtools/lib/parsers/qmake/tests/viewerbase.ui:59 #, no-c-format msgid "Add All From Directory" msgstr "从目录添加全部" #: buildtools/lib/parsers/autotools/tests/viewerbase.ui:163 #: buildtools/lib/parsers/qmake/tests/viewerbase.ui:73 #, no-c-format msgid "Choose File to Add..." msgstr "选择要添加的文件..." #: buildtools/lib/parsers/qmake/tests/viewerbase.ui:179 #, no-c-format msgid "Value 3" msgstr "值 3" #: buildtools/lib/widgets/environmentdisplaydialogbase.ui:16 #, fuzzy, no-c-format msgid "Environment" msgstr "环境变量(&N):" #: buildtools/lib/widgets/environmentdisplaydialogbase.ui:27 #, fuzzy, no-c-format msgid "Current Environment" msgstr "当前文档" #: buildtools/lib/widgets/environmentvariableswidgetbase.ui:16 #, no-c-format msgid "Environment Variables" msgstr "环境变量" #: buildtools/lib/widgets/environmentvariableswidgetbase.ui:111 #, no-c-format msgid "A&dd / Copy" msgstr "添加/复制(&D)" #: buildtools/lib/widgets/environmentvariableswidgetbase.ui:136 #, fuzzy, no-c-format msgid "E&nvironment" msgstr "环境变量(&N):" #: buildtools/lib/widgets/makeoptionswidgetbase.ui:27 #, no-c-format msgid "&Abort on first error" msgstr "遇到第一个错误就中止(&A)" #: buildtools/lib/widgets/makeoptionswidgetbase.ui:35 #, no-c-format msgid "Onl&y display commands without actually executing them" msgstr "只显示要执行的命令但并不实际执行(&Y)" #: buildtools/lib/widgets/makeoptionswidgetbase.ui:51 #, no-c-format msgid "&Name of make executable:" msgstr "make 执行文件的名称(&N):" #: buildtools/lib/widgets/makeoptionswidgetbase.ui:92 #, no-c-format msgid "Num&ber of jobs to run simultaneously:" msgstr "同时执行的任务个数(&B):" #: buildtools/lib/widgets/makeoptionswidgetbase.ui:137 #, no-c-format msgid "Run more than one &job at a time" msgstr "同时运行多个任务(&J)" #: buildtools/lib/widgets/makeoptionswidgetbase.ui:145 #, no-c-format msgid "Make priority:" msgstr "Make 优先级:" #: buildtools/lib/widgets/removesubprojectdlgbase.ui:16 #, no-c-format msgid "[REMOVE SUBPROJECT]" msgstr "[删除子工程]" #: buildtools/lib/widgets/removesubprojectdlgbase.ui:42 #, no-c-format msgid "&Information" msgstr "信息(&I)" #: buildtools/lib/widgets/removesubprojectdlgbase.ui:75 #, no-c-format msgid "Note: You will not be able to undo this operation." msgstr "注意:您将不能撤消此操作。" #: buildtools/lib/widgets/runoptionswidgetbase.ui:35 #, fuzzy, no-c-format msgid "Main Program" msgstr "主程序(&O)" #: buildtools/lib/widgets/runoptionswidgetbase.ui:52 #, no-c-format msgid "Note: These options override target specific settings." msgstr "" #: buildtools/lib/widgets/runoptionswidgetbase.ui:58 #, no-c-format msgid "" "For Automake and QMake type projects, the proper way to set these options " "are per target in the Automake Manager and QMake Manager, " "respectively." msgstr "" #: buildtools/lib/widgets/runoptionswidgetbase.ui:66 #, fuzzy, no-c-format msgid "The command line arguments passed to the main program when run" msgstr "主程序的命令行参数" #: buildtools/lib/widgets/runoptionswidgetbase.ui:74 #, fuzzy, no-c-format msgid "Run Arg&uments:" msgstr "参数(&G):" #: buildtools/lib/widgets/runoptionswidgetbase.ui:85 #, fuzzy, no-c-format msgid "Executa&ble:" msgstr "可执行文件:" #: buildtools/lib/widgets/runoptionswidgetbase.ui:96 #, fuzzy, no-c-format msgid "Full path to the executable" msgstr "剔除可执行文件中的符号信息" #: buildtools/lib/widgets/runoptionswidgetbase.ui:104 #, fuzzy, no-c-format msgid "Debug Ar&guments:" msgstr "参数(&G):" #: buildtools/lib/widgets/runoptionswidgetbase.ui:115 #, fuzzy, no-c-format msgid "The command line arguments passed to the main program when debugged" msgstr "主程序的命令行参数" #: buildtools/lib/widgets/runoptionswidgetbase.ui:123 #, fuzzy, no-c-format msgid "Working &Directory:" msgstr "目录(&D):" #: buildtools/lib/widgets/runoptionswidgetbase.ui:134 #, no-c-format msgid "Sets the current working directory for the launched process" msgstr "" #: buildtools/lib/widgets/runoptionswidgetbase.ui:163 #, fuzzy, no-c-format msgid "Automaticall&y compile before execution" msgstr "执行之前自动进行编译(&P)" #: buildtools/lib/widgets/runoptionswidgetbase.ui:166 #, fuzzy, no-c-format msgid "" "If the program is not up-to-date with the source code, compile it before " "starting its execution" msgstr "如果程序与源代码不同步,在运行前先编译它" #: buildtools/lib/widgets/runoptionswidgetbase.ui:174 #, fuzzy, no-c-format msgid "&Automatically install before execution" msgstr "执行之前自动进行编译(&P)" #: buildtools/lib/widgets/runoptionswidgetbase.ui:185 #, no-c-format msgid "Use &tdesu when installing" msgstr "" #: buildtools/lib/widgets/runoptionswidgetbase.ui:196 #, fuzzy, no-c-format msgid "Start in e&xternal terminal" msgstr "在外部终端里启动" #: buildtools/lib/widgets/runoptionswidgetbase.ui:199 #, fuzzy, no-c-format msgid "Start the main program in an external terminal" msgstr "在外部终端里(如 konsole)启动主程序。" #: buildtools/lib/widgets/subclassesdlgbase.ui:16 #, no-c-format msgid "Related Subclasses" msgstr "相关子类" #: buildtools/lib/widgets/subclassesdlgbase.ui:30 #, no-c-format msgid "&Add Relation" msgstr "添加关系(&A)" #: buildtools/lib/widgets/subclassesdlgbase.ui:41 #, no-c-format msgid "&Remove Relation" msgstr "删除关系(&R)" #: buildtools/lib/widgets/subclassesdlgbase.ui:96 #, no-c-format msgid "Related subclass &location:" msgstr "相关子类位置(&L):" #: buildtools/pascal/pascalproject_optionsdlgbase.ui:46 #, no-c-format msgid "Con&figuration:" msgstr "配置(&F):" #: buildtools/pascal/pascalproject_optionsdlgbase.ui:155 #, no-c-format msgid "Compiler op&tions:" msgstr "编译器选项(&T):" #: buildtools/pascal/pascalproject_optionsdlgbase.ui:174 #, no-c-format msgid "&Pascal compiler:" msgstr "Pascal 编译器(&P):" #: buildtools/pascal/pascalproject_optionsdlgbase.ui:301 #, no-c-format msgid "Load &Default Compiler Options" msgstr "载入默认编译器选项(&D)" #: buildtools/qmake/choosesubprojectdlgbase.ui:16 #, no-c-format msgid "Select Subproject" msgstr "选择子工程" #: buildtools/qmake/choosesubprojectdlgbase.ui:92 #: buildtools/qmake/disablesubprojectdlgbase.ui:25 #, no-c-format msgid "Subprojects" msgstr "子工程" #: buildtools/qmake/createscopedlgbase.ui:16 #, no-c-format msgid "Create Scope" msgstr "创建范围" #: buildtools/qmake/createscopedlgbase.ui:35 #, fuzzy, no-c-format msgid "Scopetype:" msgstr "纸张类型" #: buildtools/qmake/createscopedlgbase.ui:41 #, fuzzy, no-c-format msgid "Simple Scope" msgstr "删除范围" #: buildtools/qmake/createscopedlgbase.ui:46 #, fuzzy, no-c-format msgid "Function Scope" msgstr "函数" #: buildtools/qmake/createscopedlgbase.ui:51 #, fuzzy, no-c-format msgid "Include File" msgstr "转到头文件:%1" #: buildtools/qmake/createscopedlgbase.ui:58 #, no-c-format msgid "Choose between the different types of new scopes" msgstr "" #: buildtools/qmake/createscopedlgbase.ui:111 #, no-c-format msgid "Specify the new scope name" msgstr "" #: buildtools/qmake/createscopedlgbase.ui:119 #, fuzzy, no-c-format msgid "Scopename:" msgstr "类型名称:" #: buildtools/qmake/createscopedlgbase.ui:148 #, fuzzy, no-c-format msgid "Function:" msgstr "函数(&U):" #: buildtools/qmake/createscopedlgbase.ui:154 #, fuzzy, no-c-format msgid "Specify the function name" msgstr "更改函数名称" #: buildtools/qmake/createscopedlgbase.ui:162 #, fuzzy, no-c-format msgid "Arguments:" msgstr "参数(&G):" #: buildtools/qmake/createscopedlgbase.ui:168 #, no-c-format msgid "Specify the list of function arguments, delimited by a comma" msgstr "" #: buildtools/qmake/createscopedlgbase.ui:197 #, no-c-format msgid "*.pri" msgstr "" #: buildtools/qmake/createscopedlgbase.ui:203 #, fuzzy, no-c-format msgid "Choose the .pri file to include" msgstr "选择要检查的溃核文件..." #: buildtools/qmake/createscopedlgbase.ui:211 #, fuzzy, no-c-format msgid "Include File:" msgstr "转到头文件:%1" #: buildtools/qmake/createscopedlgbase.ui:222 #, no-c-format msgid "&use !include instead of include" msgstr "" #: buildtools/qmake/createscopedlgbase.ui:225 #, no-c-format msgid "Use !include instead of include for the function scope" msgstr "" #: buildtools/qmake/createscopedlgbase.ui:263 #: buildtools/qmake/disablesubprojectdlgbase.ui:77 #: parts/ctags2/ctags2_selecttagfilebase.ui:78 #: src/pluginselectdialogbase.ui:137 vcs/subversion/svn_commitdlgbase.ui:90 #, no-c-format msgid "O&K" msgstr "" #: buildtools/qmake/createscopedlgbase.ui:277 #: vcs/subversion/commitdlgbase.ui:81 #, no-c-format msgid "Ca&ncel" msgstr "" #: buildtools/qmake/disablesubprojectdlgbase.ui:16 #, fuzzy, no-c-format msgid "Select Subprojects to disable" msgstr "选择子工程" #: buildtools/qmake/newwidgetdlgbase.ui:24 #, no-c-format msgid "New Widget" msgstr "新建部件" #: buildtools/qmake/newwidgetdlgbase.ui:43 #, no-c-format msgid "Widget Properties" msgstr "部件属性" #: buildtools/qmake/newwidgetdlgbase.ui:54 #, no-c-format msgid "Subclassing" msgstr "子类" #: buildtools/qmake/newwidgetdlgbase.ui:73 #, no-c-format msgid "Caption:" msgstr "标题:" #: buildtools/qmake/newwidgetdlgbase.ui:86 #, no-c-format msgid "Subclass name:" msgstr "子类名:" #: buildtools/qmake/projectconfigurationdlgbase.ui:25 #, no-c-format msgid "QMake Subproject Configuration" msgstr "QMake 子工程设置" #: buildtools/qmake/projectconfigurationdlgbase.ui:101 #: parts/abbrev/abbrevconfigwidgetbase.ui:65 #, no-c-format msgid "Template" msgstr "模板" #: buildtools/qmake/projectconfigurationdlgbase.ui:112 #, no-c-format msgid "Librar&y" msgstr "库(&Y)" #: buildtools/qmake/projectconfigurationdlgbase.ui:115 #, no-c-format msgid "Create a library" msgstr "创建一个库" #: buildtools/qmake/projectconfigurationdlgbase.ui:123 #, fuzzy, no-c-format msgid "&Subdirectories" msgstr "子目录(&U)" #: buildtools/qmake/projectconfigurationdlgbase.ui:126 #, no-c-format msgid "This project holds subdirectories" msgstr "这个工程含有子目录" #: buildtools/qmake/projectconfigurationdlgbase.ui:137 #, fuzzy, no-c-format msgid "Ordered" msgstr "首选" #: buildtools/qmake/projectconfigurationdlgbase.ui:140 #, no-c-format msgid "Build the subprojects in the order they are listed in the .pro file" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:168 #, fuzzy, no-c-format msgid "A&pplication" msgstr "应用程序" #: buildtools/qmake/projectconfigurationdlgbase.ui:171 #, no-c-format msgid "Create an application" msgstr "创建一个应用程序" #: buildtools/qmake/projectconfigurationdlgbase.ui:181 #, no-c-format msgid "Target" msgstr "目标" #: buildtools/qmake/projectconfigurationdlgbase.ui:192 #, fuzzy, no-c-format msgid "Path:" msgstr "路径(&P):" #: buildtools/qmake/projectconfigurationdlgbase.ui:203 #, fuzzy, no-c-format msgid "Output file:" msgstr "输出文件(&F):" #: buildtools/qmake/projectconfigurationdlgbase.ui:226 #, no-c-format msgid "Target Installation" msgstr "目标安装" #: buildtools/qmake/projectconfigurationdlgbase.ui:242 #, no-c-format msgid "I&nstall" msgstr "安装(&N)" #: buildtools/qmake/projectconfigurationdlgbase.ui:250 #, fuzzy, no-c-format msgid "Installation path:" msgstr "安装路径(&I):" #: buildtools/qmake/projectconfigurationdlgbase.ui:263 #, fuzzy, no-c-format msgid "Makefile" msgstr "&Makefile" #: buildtools/qmake/projectconfigurationdlgbase.ui:284 #, fuzzy, no-c-format msgid "Arguments" msgstr "参数(&G)" #: buildtools/qmake/projectconfigurationdlgbase.ui:295 #, fuzzy, no-c-format msgid "Run arguments:" msgstr "参数(&G):" #: buildtools/qmake/projectconfigurationdlgbase.ui:313 #, fuzzy, no-c-format msgid "Debug Arguments:" msgstr "参数(&G):" #: buildtools/qmake/projectconfigurationdlgbase.ui:366 #, no-c-format msgid "Build Mode" msgstr "构建方式" #: buildtools/qmake/projectconfigurationdlgbase.ui:372 #: buildtools/qmake/projectconfigurationdlgbase.ui:405 #, no-c-format msgid "Set project to be built in release mode" msgstr "设置工程编译为发行版本" #: buildtools/qmake/projectconfigurationdlgbase.ui:394 #, no-c-format msgid "Set project to be built in debug mode" msgstr "设置工程编译为调试版本" #: buildtools/qmake/projectconfigurationdlgbase.ui:416 #, fuzzy, no-c-format msgid "Debug && Release" msgstr "发行版(&R)" #: buildtools/qmake/projectconfigurationdlgbase.ui:422 #, fuzzy, no-c-format msgid "Set project to be built in debug_and_release mode" msgstr "设置工程编译为发行版本" #: buildtools/qmake/projectconfigurationdlgbase.ui:440 #, fuzzy, no-c-format msgid "Enable warnings" msgstr "打开警告(&W)" #: buildtools/qmake/projectconfigurationdlgbase.ui:443 #, no-c-format msgid "Show compiler warnings" msgstr "显示编译器警告" #: buildtools/qmake/projectconfigurationdlgbase.ui:454 #, no-c-format msgid "Build All" msgstr "全部构建" #: buildtools/qmake/projectconfigurationdlgbase.ui:457 #, no-c-format msgid "Builds Debug and Release version if Debug&Release is configured" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:469 #, no-c-format msgid "Requirements" msgstr "需要" #: buildtools/qmake/projectconfigurationdlgbase.ui:480 #: buildtools/qmake/projectconfigurationdlgbase.ui:648 #, fuzzy, no-c-format msgid "OpenGL" msgstr "Open&GL" #: buildtools/qmake/projectconfigurationdlgbase.ui:483 #, no-c-format msgid "Requires the OpenGL (or Mesa) headers/libraries" msgstr "需要 OpenGL(或 Mesa)头文件和库" #: buildtools/qmake/projectconfigurationdlgbase.ui:491 #, fuzzy, no-c-format msgid "STL" msgstr "&STL" #: buildtools/qmake/projectconfigurationdlgbase.ui:502 #, no-c-format msgid "Requires support for multi-threaded application or library." msgstr "需要对多线程程序的支持或库。" #: buildtools/qmake/projectconfigurationdlgbase.ui:510 #, fuzzy, no-c-format msgid "Qt" msgstr "&Qt" #: buildtools/qmake/projectconfigurationdlgbase.ui:513 #, no-c-format msgid "Requires the Qt header files/library" msgstr "需要 Qt 头文件和库" #: buildtools/qmake/projectconfigurationdlgbase.ui:521 #, fuzzy, no-c-format msgid "X11" msgstr "X&11" #: buildtools/qmake/projectconfigurationdlgbase.ui:524 #: buildtools/qmake/projectconfigurationdlgbase.ui:804 #, no-c-format msgid "Support required for X11 application or library" msgstr "需要对 X11 程序的支持或库" #: buildtools/qmake/projectconfigurationdlgbase.ui:532 #, no-c-format msgid "Precompiled headers" msgstr "预编译头文件" #: buildtools/qmake/projectconfigurationdlgbase.ui:540 #, fuzzy, no-c-format msgid "RTTI" msgstr "RTT&I" #: buildtools/qmake/projectconfigurationdlgbase.ui:548 #, fuzzy, no-c-format msgid "Windows" msgstr "窗口" #: buildtools/qmake/projectconfigurationdlgbase.ui:556 #, fuzzy, no-c-format msgid "Custom Configuration" msgstr "构建配置" #: buildtools/qmake/projectconfigurationdlgbase.ui:564 #, fuzzy, no-c-format msgid "Exceptions " msgstr "例外(&X)" #: buildtools/qmake/projectconfigurationdlgbase.ui:580 #, no-c-format msgid "Console" msgstr "控制台" #: buildtools/qmake/projectconfigurationdlgbase.ui:586 #, no-c-format msgid "Check to build a win32 console app" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:599 #, fuzzy, no-c-format msgid "Qt4 Libraries" msgstr "库" #: buildtools/qmake/projectconfigurationdlgbase.ui:610 #, no-c-format msgid "Gui" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:629 #, fuzzy, no-c-format msgid "Network" msgstr "新建" #: buildtools/qmake/projectconfigurationdlgbase.ui:656 #, fuzzy, no-c-format msgid "QtUiTools" msgstr "工具" #: buildtools/qmake/projectconfigurationdlgbase.ui:672 #, no-c-format msgid "SVG" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:680 #, fuzzy, no-c-format msgid "QtTest" msgstr "测试(&T)" #: buildtools/qmake/projectconfigurationdlgbase.ui:688 #, fuzzy, no-c-format msgid "Qt3 Support" msgstr "C++ 支持" #: buildtools/qmake/projectconfigurationdlgbase.ui:696 #, no-c-format msgid "QDBus (Qt4.2)" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:704 #, fuzzy, no-c-format msgid "QtAssistant" msgstr "KDevelop 助手" #: buildtools/qmake/projectconfigurationdlgbase.ui:712 #, no-c-format msgid "QtScript (Qt4.3)" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:720 #, no-c-format msgid "QtWebKit (Qt4.4)" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:728 #, no-c-format msgid "QtXmlPatterns (Qt4.4)" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:736 #, no-c-format msgid "Phonon (Qt4.4)" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:744 #, no-c-format msgid "QtHelp (Qt4.4)" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:754 #, no-c-format msgid "Library Options" msgstr "库选项" #: buildtools/qmake/projectconfigurationdlgbase.ui:776 #, fuzzy, no-c-format msgid "Build as static library" msgstr "静态库(&A)" #: buildtools/qmake/projectconfigurationdlgbase.ui:790 #: languages/sql/sqlconfigwidget.ui:22 #, no-c-format msgid "Plugin" msgstr "插件" #: buildtools/qmake/projectconfigurationdlgbase.ui:801 #, fuzzy, no-c-format msgid "Make libtool archive" msgstr "制作 libtool 存档(&K)" #: buildtools/qmake/projectconfigurationdlgbase.ui:839 #, fuzzy, no-c-format msgid "Build as shared library" msgstr "共享库(&H)" #: buildtools/qmake/projectconfigurationdlgbase.ui:850 #, fuzzy, no-c-format msgid "Designer Plugin" msgstr "禁用插件" #: buildtools/qmake/projectconfigurationdlgbase.ui:869 #, fuzzy, no-c-format msgid "Library version:" msgstr "库版本(&Y):" #: buildtools/qmake/projectconfigurationdlgbase.ui:910 #, fuzzy, no-c-format msgid "Includes" msgstr "包含(&I)" #: buildtools/qmake/projectconfigurationdlgbase.ui:932 #: buildtools/qmake/projectconfigurationdlgbase.ui:1037 #: buildtools/qmake/projectconfigurationdlgbase.ui:1144 #: buildtools/qmake/projectconfigurationdlgbase.ui:1240 #: buildtools/qmake/projectconfigurationdlgbase.ui:1312 #: buildtools/qmake/projectconfigurationdlgbase.ui:1400 #: buildtools/qmake/projectconfigurationdlgbase.ui:1496 #: buildtools/qmake/projectconfigurationdlgbase.ui:1571 #: buildtools/qmake/projectconfigurationdlgbase.ui:1990 #, fuzzy, no-c-format msgid "Move Up" msgstr "上移(&U)" #: buildtools/qmake/projectconfigurationdlgbase.ui:940 #: buildtools/qmake/projectconfigurationdlgbase.ui:1045 #: buildtools/qmake/projectconfigurationdlgbase.ui:1152 #: buildtools/qmake/projectconfigurationdlgbase.ui:1248 #: buildtools/qmake/projectconfigurationdlgbase.ui:1320 #: buildtools/qmake/projectconfigurationdlgbase.ui:1408 #: buildtools/qmake/projectconfigurationdlgbase.ui:1504 #: buildtools/qmake/projectconfigurationdlgbase.ui:1579 #: buildtools/qmake/projectconfigurationdlgbase.ui:1998 #, fuzzy, no-c-format msgid "Move Down" msgstr "下移(&N)" #: buildtools/qmake/projectconfigurationdlgbase.ui:965 #, no-c-format msgid "Directories Outside Project" msgstr "工程外的目录" #: buildtools/qmake/projectconfigurationdlgbase.ui:984 #, no-c-format msgid "Directories Inside Project" msgstr "工程内的目录" #: buildtools/qmake/projectconfigurationdlgbase.ui:1013 #: buildtools/qmake/projectconfigurationdlgbase.ui:1120 #: buildtools/qmake/projectconfigurationdlgbase.ui:1216 #: buildtools/qmake/projectconfigurationdlgbase.ui:1472 #, fuzzy, no-c-format msgid "Add..." msgstr "添加(&A)..." #: buildtools/qmake/projectconfigurationdlgbase.ui:1074 #, no-c-format msgid "Libraries" msgstr "库" #: buildtools/qmake/projectconfigurationdlgbase.ui:1091 #, fuzzy, no-c-format msgid "External Library Dirs" msgstr "外部库" #: buildtools/qmake/projectconfigurationdlgbase.ui:1187 #, no-c-format msgid "External Libraries" msgstr "外部库" #: buildtools/qmake/projectconfigurationdlgbase.ui:1283 #, no-c-format msgid "Link Convenience Libraries Inside Project" msgstr "连接工程之内的库" #: buildtools/qmake/projectconfigurationdlgbase.ui:1351 #, fuzzy, no-c-format msgid "Dependencies" msgstr "依赖关系(&D)" #: buildtools/qmake/projectconfigurationdlgbase.ui:1368 #, no-c-format msgid "Targets in Project" msgstr "工程内的目标" #: buildtools/qmake/projectconfigurationdlgbase.ui:1443 #, no-c-format msgid "Miscellaneous Targets" msgstr "杂项目标" #: buildtools/qmake/projectconfigurationdlgbase.ui:1539 #, no-c-format msgid "Order in Which Sub Projects Are Built" msgstr "构建子工程的顺序" #: buildtools/qmake/projectconfigurationdlgbase.ui:1629 #, no-c-format msgid "Compiler Options" msgstr "编译器选项" #: buildtools/qmake/projectconfigurationdlgbase.ui:1656 #, fuzzy, no-c-format msgid "Debug flags:" msgstr "调试版标志(&D):" #: buildtools/qmake/projectconfigurationdlgbase.ui:1667 #, fuzzy, no-c-format msgid "Release flags:" msgstr "发行版编译选项(&R):" #: buildtools/qmake/projectconfigurationdlgbase.ui:1678 #, no-c-format msgid "Defines:" msgstr "定义:" #: buildtools/qmake/projectconfigurationdlgbase.ui:1717 #, no-c-format msgid "Intermediate File Directories" msgstr "中间文件目录" #: buildtools/qmake/projectconfigurationdlgbase.ui:1736 #, fuzzy, no-c-format msgid "MOC files:" msgstr "MOC 文件(&M):" #: buildtools/qmake/projectconfigurationdlgbase.ui:1747 #, fuzzy, no-c-format msgid "UI files:" msgstr "UI 文件(&U):" #: buildtools/qmake/projectconfigurationdlgbase.ui:1758 #, fuzzy, no-c-format msgid "Object files:" msgstr "目标文件(&J):" #: buildtools/qmake/projectconfigurationdlgbase.ui:1772 #, fuzzy, no-c-format msgid "RCC files:" msgstr "MOC 文件(&M):" #: buildtools/qmake/projectconfigurationdlgbase.ui:1817 #, no-c-format msgid "Corba" msgstr "Corba" #: buildtools/qmake/projectconfigurationdlgbase.ui:1831 #, fuzzy, no-c-format msgid "Compiler options:" msgstr "编译器选项(&T):" #: buildtools/qmake/projectconfigurationdlgbase.ui:1852 #, fuzzy, no-c-format msgid "IDL compiler:" msgstr "IDL 编译器(&I):" #: buildtools/qmake/projectconfigurationdlgbase.ui:1884 #, fuzzy, no-c-format msgid "Custom Variables" msgstr "自定义变量(&V)" #: buildtools/qmake/projectconfigurationdlgbase.ui:1912 #: buildtools/qmake/projectconfigurationdlgbase.ui:2076 #, fuzzy, no-c-format msgid "Operator" msgstr "操作" #: buildtools/qmake/projectconfigurationdlgbase.ui:2045 #: languages/python/app_templates/pyqt/documentdetails.ui:57 #: parts/ctags2/ctags2_createtagfilebase.ui:27 #: parts/ctags2/ctags2_selecttagfilebase.ui:27 #, no-c-format msgid "Name:" msgstr "名称:" #: buildtools/qmake/projectconfigurationdlgbase.ui:2082 #, fuzzy, no-c-format msgid "+=" msgstr "+" #: buildtools/qmake/projectconfigurationdlgbase.ui:2087 #, fuzzy, no-c-format msgid "-=" msgstr "-" #: buildtools/qmake/projectconfigurationdlgbase.ui:2092 #, no-c-format msgid "=" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:2097 #, no-c-format msgid "*=" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:2102 #, no-c-format msgid "~=" msgstr "" #: buildtools/qmake/projectconfigurationdlgbase.ui:2163 #, no-c-format msgid "Value:" msgstr "值:" #: buildtools/qmake/qmakeoptionswidgetbase.ui:16 #, fuzzy, no-c-format msgid "QMake Manager Options" msgstr "QMake 管理器" #: buildtools/qmake/qmakeoptionswidgetbase.ui:27 #, no-c-format msgid "" "- Also look into C++/Qt to define the QMake, Qt and Designer paths.\n" "- Environment variables that should be resolved during parsing can be set on " "the Make Options page.\n" "- For changes on this page to take effect the project needs to be reloaded." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:45 #, fuzzy, no-c-format msgid "QMake Project File:" msgstr "工程文件(&P):" #: buildtools/qmake/qmakeoptionswidgetbase.ui:56 #, no-c-format msgid "" "This is the top level qmake project file, from which the project manager " "will be populated.\n" "Leave this empty to automatically search for a .pro file in the project " "directory." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:70 #, no-c-format msgid "Behaviour on Subproject Change" msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:81 #, no-c-format msgid "" "The following settings determine what the project configuration dialog " "should do when another subproject is selected while the dialog is still open." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:92 #, fuzzy, no-c-format msgid "&Always Save" msgstr "总是(&A)" #: buildtools/qmake/qmakeoptionswidgetbase.ui:95 #, no-c-format msgid "Always save the configuration when changing the project." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:98 #, no-c-format msgid "" "Always save the project configuration when selecting a another sub project." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:106 #, no-c-format msgid "&Never Save (Warning: This can lead to loss of setting changes)" msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:109 #, no-c-format msgid "Never save the configuration when changing the project." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:112 #, no-c-format msgid "" "Never save the project configuration when selecting a another sub project." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:120 #, no-c-format msgid "As&k" msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:126 #, no-c-format msgid "" "Ask whether the configuration should be saved when switching the project." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:129 #, no-c-format msgid "" "Always ask whether the configuration should be saved when selecting another " "subproject." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:147 #, no-c-format msgid "Repla&ce File Paths with matching Variables when adding files" msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:153 #, no-c-format msgid "" "This replaces the relative paths of added files with existing custom " "variables if the value assigned to it is the same as the path." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:161 #, no-c-format msgid "Show variables in filenames in the QMake projectmanager view." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:169 #, no-c-format msgid "" "Display only filenames in the QMake Manager (Project reload is needed after " "changing this setting)" msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:177 #, no-c-format msgid "" "Do not use the QMake Default Options\n" "This disables the reading of any .qmake.cache files or mkspecs." msgstr "" #: buildtools/qmake/qmakeoptionswidgetbase.ui:186 #, no-c-format msgid "Show parse error in message box" msgstr "" #: buildtools/script/scriptoptionswidgetbase.ui:27 #, no-c-format msgid "&Include files into the project with the following patterns:" msgstr "将如下样式的文件名包含到工程中(&I):" #: buildtools/script/scriptoptionswidgetbase.ui:90 #, no-c-format msgid "&Exclude the following patterns:" msgstr "排除如下样式的文件名(&E):" #: editors/editor-chooser/editchooser.ui:24 #, no-c-format msgid "&Embedded Editor" msgstr "内嵌编辑器(&E)" #: editors/editor-chooser/editchooser.ui:40 #, no-c-format msgid "" "Note: Changing the preferred editor will not affect\n" "already open files." msgstr "注意: 改变首选的编辑器将不会影响已经打开的文件。" #: editors/editor-chooser/editchooser.ui:51 #, no-c-format msgid "On External Changes" msgstr "外部更改时" #: editors/editor-chooser/editchooser.ui:54 #, no-c-format msgid "" "

    Action to take when an open file is changed on disk

    \n" "

    Do nothing - The file will be marked as externally changed and the " "user will be asked to verify any attempt to overwrite it

    \n" "

    Alert the user - A dialog will alert the user that a file has " "changed and offer the user to reload the file

    \n" "

    Automatically reload - Any files that are not modified in memory " "are reloaded, and an alert is shown for any conflicts

    " msgstr "" #: editors/editor-chooser/editchooser.ui:68 #, fuzzy, no-c-format msgid "&Do nothing" msgstr "不运行" #: editors/editor-chooser/editchooser.ui:82 #, fuzzy, no-c-format msgid "&Alert the user" msgstr "更换用户" #: editors/editor-chooser/editchooser.ui:90 #, no-c-format msgid "Automatically reload the file &if safe, alert the user if not" msgstr "" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:38 #, no-c-format msgid "Graphic Filter" msgstr "图形过滤器" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:50 #, no-c-format msgid "Normal mode" msgstr "普通模式" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:58 #, no-c-format msgid "TV mode" msgstr "TV 模式" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:66 #, no-c-format msgid "2xSaI" msgstr "" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:74 #, no-c-format msgid "Super 2xSal" msgstr "" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:82 #, no-c-format msgid "Super Eagle" msgstr "" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:92 #, no-c-format msgid "GBA binary:" msgstr "GBA 执行文件:" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:105 #, no-c-format msgid "Additional parameters:" msgstr "其它参数:" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:113 #, no-c-format msgid "VisualBoy Advance (emulator):" msgstr "VisualBoy Advance (仿真器):" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:157 #, no-c-format msgid "Scaling" msgstr "放大" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:169 #, no-c-format msgid "1x" msgstr "1x" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:177 #, no-c-format msgid "2x" msgstr "2x" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:185 #, no-c-format msgid "3x" msgstr "3x" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:193 #, no-c-format msgid "4x" msgstr "4x" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:203 #, no-c-format msgid "Full screen" msgstr "全屏" #: embedded/visualboyadvance/vbaconfigwidgetbase.ui:211 #, no-c-format msgid "Start in external terminal" msgstr "在外部终端里启动" #: kdevdesigner/designer/about.ui:41 #, no-c-format msgid "Qt Designer" msgstr "Qt 设计师" #: kdevdesigner/designer/about.ui:80 #, no-c-format msgid "Version 3.2" msgstr "版本 3.2" #: kdevdesigner/designer/about.ui:93 #, no-c-format msgid "Copyright (C) 2000-2003 Trolltech AS. All Rights Reserved." msgstr "" #: kdevdesigner/designer/about.ui:114 #, no-c-format msgid "" "

    Qt Commercial Edition license holders: This program is licensed to you " "under the terms of the Qt Commercial License Agreement. For details, see the " "file LICENSE that came with this software distribution.

    Qt Free " "Edition users: This program is licensed to you under the terms of the GNU " "General Public License Version 2. For details, see the file LICENSE.GPL that " "came with this software distribution.

    The program is provided AS IS " "with NO WARRANTY OF ANY KIND, INCLUDING THE WARRANTY OF DESIGN, " "MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

    " msgstr "" #: kdevdesigner/designer/actioneditor.ui:41 #, no-c-format msgid "Edit Actions" msgstr "编辑动作" #: kdevdesigner/designer/actioneditor.ui:83 #, no-c-format msgid "Create new Action" msgstr "创建新动作" #: kdevdesigner/designer/actioneditor.ui:100 #, no-c-format msgid "Delete current Action" msgstr "删除当前动作" #: kdevdesigner/designer/actioneditor.ui:117 #, no-c-format msgid "Connect current Action" msgstr "连接当前动作" #: kdevdesigner/designer/configtoolboxdialog.ui:132 #, no-c-format msgid "Available Tools" msgstr "可用工具" #: kdevdesigner/designer/configtoolboxdialog.ui:175 #, no-c-format msgid "Common Widgets Page" msgstr "公共部件页面" #: kdevdesigner/designer/connectiondialog.ui:41 #, no-c-format msgid "View & Edit Connections" msgstr "查看并编辑连接" #: kdevdesigner/designer/connectiondialog.ui:74 #, no-c-format msgid "&Connections:" msgstr "连接(&C):" #: kdevdesigner/designer/connectiondialog.ui:129 #, no-c-format msgid "&Edit Slots..." msgstr "编辑槽(&E)..." #: kdevdesigner/designer/createtemplate.ui:61 #: parts/filecreate/fctemplateeditbase.ui:41 #, no-c-format msgid "Template &name:" msgstr "模板名称(&N):" #: kdevdesigner/designer/createtemplate.ui:72 #, no-c-format msgid "Name of the new template" msgstr "新模板的名称" #: kdevdesigner/designer/createtemplate.ui:75 #, no-c-format msgid "Enter the name of the new template" msgstr "输入新模板的名称" #: kdevdesigner/designer/createtemplate.ui:83 #, no-c-format msgid "Class of the new template" msgstr "新模板的类" #: kdevdesigner/designer/createtemplate.ui:86 #, no-c-format msgid "" "Enter the name of the class which should be used as the template's base class" msgstr "" #: kdevdesigner/designer/createtemplate.ui:125 #: languages/cpp/subclassingdlgbase.ui:183 #: languages/kjssupport/subclassingdlgbase.ui:183 #, no-c-format msgid "C&reate" msgstr "创建(&R)" #: kdevdesigner/designer/createtemplate.ui:131 #, no-c-format msgid "Creates the new template" msgstr "创建新模板" #: kdevdesigner/designer/createtemplate.ui:142 #, no-c-format msgid "Closes the Dialog" msgstr "关闭对话框" #: kdevdesigner/designer/createtemplate.ui:152 #, no-c-format msgid "&Baseclass for template:" msgstr "模板的基类(&B):" #: kdevdesigner/designer/customwidgeteditor.ui:41 #, no-c-format msgid "Edit Custom Widgets" msgstr "编辑自定义部件" #: kdevdesigner/designer/customwidgeteditor.ui:47 #, no-c-format msgid "" "Edit Custom Widgets

    Add or delete custom widgets from Qt " "Designer's database, and edit the properties of existing widgets.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:64 #, no-c-format msgid "The list of all custom widgets known to Qt Designer." msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:72 #, no-c-format msgid "&New Widget" msgstr "新建部件(&N)" #: kdevdesigner/designer/customwidgeteditor.ui:75 #, no-c-format msgid "Add new custom widget." msgstr "添加新的自定义部件。" #: kdevdesigner/designer/customwidgeteditor.ui:78 #, no-c-format msgid "" "Create an empty custom widget and add it to the list.

    New custom " "widgets have a default name and header file, which must both be changed to " "appropriate values.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:86 #, no-c-format msgid "&Delete Widget" msgstr "删除部件(&D)" #: kdevdesigner/designer/customwidgeteditor.ui:89 #, no-c-format msgid "Delete custom widget" msgstr "删除自定义部件" #: kdevdesigner/designer/customwidgeteditor.ui:92 #, no-c-format msgid "" "Delete the selected custom widget.

    You can only delete widgets that " "are not used in any open form.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:148 #, no-c-format msgid "Closes the Dialog." msgstr "关闭对话框。" #: kdevdesigner/designer/customwidgeteditor.ui:175 #, no-c-format msgid "&Load Descriptions..." msgstr "装入描述(&L)..." #: kdevdesigner/designer/customwidgeteditor.ui:178 #, no-c-format msgid "Loads widget description file" msgstr "装入部件描述文件" #: kdevdesigner/designer/customwidgeteditor.ui:181 #, no-c-format msgid "" "Load Descriptions

    Loads a file which contains descriptions of " "custom widgets, so that these custom widgets can be used in the Qt Designer." "

    \n" "

    Since it is a lot of work to type in all the information for custom " "widgets, you should consider using the tqtcreatecw tool which is in $TQTDIR/" "tools/designer/tools/tqtcreatecw. Using tqtcreatecw you can create custom " "widget description files for your custom widgets without the need to type in " "all the information manually. For more information about the README file in " "the tqtcreatecw directory

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:190 #, no-c-format msgid "&Save Descriptions..." msgstr "保存描述(&S)..." #: kdevdesigner/designer/customwidgeteditor.ui:193 #, no-c-format msgid "Saves widget description file" msgstr "保存部件描述文件" #: kdevdesigner/designer/customwidgeteditor.ui:196 #, no-c-format msgid "" "Save Descriptions

    Saves all the descriptions of the shown custom " "widgets to a file which can then be used to import the custom widgets " "elsewhere." msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:204 #, no-c-format msgid "Change the properties of the selected custom widget." msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:211 #, no-c-format msgid "De&finition" msgstr "定义(&F)" #: kdevdesigner/designer/customwidgeteditor.ui:259 #: kdevdesigner/designer/iconvieweditor.ui:265 #: kdevdesigner/designer/listboxeditor.ui:232 #: kdevdesigner/designer/listvieweditor.ui:239 #: kdevdesigner/designer/listvieweditor.ui:462 #: kdevdesigner/designer/tableeditor.ui:350 #: kdevdesigner/designer/tableeditor.ui:617 #, no-c-format msgid "Select a Pixmap" msgstr "选择像素图" #: kdevdesigner/designer/customwidgeteditor.ui:262 #, no-c-format msgid "" "Select a pixmap file.

    The pixmap will be used to represent the " "widget in forms.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:286 #, no-c-format msgid "Enter filename" msgstr "输入文件名" #: kdevdesigner/designer/customwidgeteditor.ui:289 #, no-c-format msgid "" "Change the header file's name for the selected custom widget.

    The " "header file will be included by forms using the widget.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:306 #, no-c-format msgid "Choose headerfile" msgstr "选择头文件" #: kdevdesigner/designer/customwidgeteditor.ui:309 #, no-c-format msgid "Look for the header file using a file dialog." msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:320 #: languages/cpp/cppnewclassdlgbase.ui:463 #, no-c-format msgid "Local" msgstr "局部" #: kdevdesigner/designer/customwidgeteditor.ui:327 #, no-c-format msgid "Select access" msgstr "选择访问" #: kdevdesigner/designer/customwidgeteditor.ui:330 #, no-c-format msgid "" "Change how the include file will be included.

    Global include files " "will be included using <>-brackets, while local files will included " "using quotation marks.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:340 #, no-c-format msgid "Change classname" msgstr "更改类名" #: kdevdesigner/designer/customwidgeteditor.ui:343 #, no-c-format msgid "" "Enter the classname for the selected custom widget.

    A class of that " "name must be defined in the header file.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:351 #, no-c-format msgid "Heade&rfile:" msgstr "头文件(&R):" #: kdevdesigner/designer/customwidgeteditor.ui:362 #, no-c-format msgid "Cl&ass:" msgstr "类(&A):" #: kdevdesigner/designer/customwidgeteditor.ui:373 #: kdevdesigner/designer/tableeditor.ui:374 #: kdevdesigner/designer/tableeditor.ui:552 #, no-c-format msgid "Pixmap:" msgstr "像素图:" #: kdevdesigner/designer/customwidgeteditor.ui:381 #, no-c-format msgid "Si&ze hint:" msgstr "大小提示(&Z):" #: kdevdesigner/designer/customwidgeteditor.ui:392 #, no-c-format msgid "Size p&olicy:" msgstr "大小策略(&O):" #: kdevdesigner/designer/customwidgeteditor.ui:421 #: kdevdesigner/designer/customwidgeteditor.ui:502 #, fuzzy, no-c-format msgid "MinimumExpanding" msgstr "展开目录" #: kdevdesigner/designer/customwidgeteditor.ui:433 #, fuzzy, no-c-format msgid "Vertical Sizepolicy" msgstr "服务类型(&T)" #: kdevdesigner/designer/customwidgeteditor.ui:436 #, fuzzy, no-c-format msgid "Choose the Vertical size policy" msgstr "服务类型(&T)" #: kdevdesigner/designer/customwidgeteditor.ui:453 #, no-c-format msgid "Size hint width" msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:456 #: kdevdesigner/designer/customwidgeteditor.ui:476 #, no-c-format msgid "" "Set the size hint for the selected widget.

    The size hint provides " "the recommended size for the widget. Enter a sizehint of -1/-1 if no size is " "recommended.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:473 #, no-c-format msgid "Size hint height" msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:514 #, no-c-format msgid "Horizontal Sizepolicy" msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:517 #, no-c-format msgid "Choose the horizontal size policy for the widget" msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:542 #, no-c-format msgid "Con&tainer widget" msgstr "容器部件(&T)" #: kdevdesigner/designer/customwidgeteditor.ui:545 #, no-c-format msgid "Container Widget" msgstr "容器部件" #: kdevdesigner/designer/customwidgeteditor.ui:548 #, no-c-format msgid "" "

    Container Widget

    \n" "

    If this custom widget is able to contain other widgets (children), check " "this checkbox.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:559 #, no-c-format msgid "Si&gnals" msgstr "信号(&N)" #: kdevdesigner/designer/customwidgeteditor.ui:576 #, no-c-format msgid "The list of all the Q_SIGNALS that the selected widget can emit." msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:615 #, no-c-format msgid "N&ew Signal" msgstr "新建信号(&E)" #: kdevdesigner/designer/customwidgeteditor.ui:621 #, no-c-format msgid "Add new signal" msgstr "添加新信号" #: kdevdesigner/designer/customwidgeteditor.ui:624 #, no-c-format msgid "" "Add a new signal for the current custom widget.

    An argument list " "should be provided in the signal's name, and the name must be unique.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:632 #, no-c-format msgid "Dele&te Signal" msgstr "删除信号(&T)" #: kdevdesigner/designer/customwidgeteditor.ui:638 #, no-c-format msgid "Delete signal" msgstr "删除信号" #: kdevdesigner/designer/customwidgeteditor.ui:641 #, no-c-format msgid "" "Delete the signal.

    All connections using this signal will also be " "deleted.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:665 #, no-c-format msgid "S&ignal:" msgstr "信号(&I):" #: kdevdesigner/designer/customwidgeteditor.ui:676 #, no-c-format msgid "Change signal name" msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:679 #: kdevdesigner/designer/customwidgeteditor.ui:758 #, no-c-format msgid "" "Change the name of the selected slot.

    An argument list should be " "provided in the signal's name, and the name must be unique.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:691 #, no-c-format msgid "S&lots" msgstr "槽(&L)" #: kdevdesigner/designer/customwidgeteditor.ui:717 #: kdevdesigner/designer/editfunctions.ui:95 #: kdevdesigner/designer/variabledialog.ui:67 #: languages/cpp/addattributedialogbase.ui:28 #: languages/cpp/addmethoddialogbase.ui:39 #: languages/cpp/subclassingdlgbase.ui:106 #: languages/kjssupport/subclassingdlgbase.ui:71 #, no-c-format msgid "Access" msgstr "访问" #: kdevdesigner/designer/customwidgeteditor.ui:736 #, no-c-format msgid "The list of all the custom widget's slots." msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:744 #, no-c-format msgid "Sl&ot:" msgstr "槽(&O):" #: kdevdesigner/designer/customwidgeteditor.ui:755 #, no-c-format msgid "Change slot name" msgstr "更改槽名称" #: kdevdesigner/designer/customwidgeteditor.ui:766 #: kdevdesigner/designer/editfunctions.ui:433 #, no-c-format msgid "&Access:" msgstr "访问(&A):" #: kdevdesigner/designer/customwidgeteditor.ui:787 #, no-c-format msgid "Change slot access" msgstr "更改槽访问" #: kdevdesigner/designer/customwidgeteditor.ui:790 #, no-c-format msgid "" "Change the slot's access policy.

    You can only connect to the " "widget's public Q_SLOTS.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:829 #, no-c-format msgid "N&ew Slot" msgstr "新建槽(&E)" #: kdevdesigner/designer/customwidgeteditor.ui:835 #, no-c-format msgid "Add new slot" msgstr "添加新槽" #: kdevdesigner/designer/customwidgeteditor.ui:838 #, no-c-format msgid "" "Add a new slot to the current custom widget.

    An argument list " "should be provided in the signal's name, and the name must be unique.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:846 #, no-c-format msgid "Dele&te Slot" msgstr "删除槽(&T)" #: kdevdesigner/designer/customwidgeteditor.ui:852 #, no-c-format msgid "Delete slot" msgstr "删除槽" #: kdevdesigner/designer/customwidgeteditor.ui:855 #, no-c-format msgid "" "Delete the slot.

    All connections using this slot will also be " "deleted.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:867 #, no-c-format msgid "&Properties" msgstr "属性(&P)" #: kdevdesigner/designer/customwidgeteditor.ui:915 #, no-c-format msgid "N&ew Property" msgstr "新建属性(&E)" #: kdevdesigner/designer/customwidgeteditor.ui:921 #, no-c-format msgid "Add new property" msgstr "添加新属性" #: kdevdesigner/designer/customwidgeteditor.ui:924 #, no-c-format msgid "" "Add a new property to the current custom widget.

    The properties " "must be implemented in the class using Qt's property system.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:932 #, no-c-format msgid "Dele&te Property" msgstr "删除属性(&T)" #: kdevdesigner/designer/customwidgeteditor.ui:938 #, no-c-format msgid "Delete property" msgstr "删除属性" #: kdevdesigner/designer/customwidgeteditor.ui:941 #, no-c-format msgid "Deletes the selected property." msgstr "删除选中属性。" #: kdevdesigner/designer/customwidgeteditor.ui:949 #, no-c-format msgid "String" msgstr "String" #: kdevdesigner/designer/customwidgeteditor.ui:954 #, no-c-format msgid "CString" msgstr "CString" #: kdevdesigner/designer/customwidgeteditor.ui:959 #, no-c-format msgid "StringList" msgstr "StringList" #: kdevdesigner/designer/customwidgeteditor.ui:964 #, no-c-format msgid "Bool" msgstr "Bool" #: kdevdesigner/designer/customwidgeteditor.ui:969 #, no-c-format msgid "Int" msgstr "Int" #: kdevdesigner/designer/customwidgeteditor.ui:974 #, no-c-format msgid "UInt" msgstr "UInt" #: kdevdesigner/designer/customwidgeteditor.ui:984 #, no-c-format msgid "Color" msgstr "颜色" #: kdevdesigner/designer/customwidgeteditor.ui:989 #, no-c-format msgid "Rect" msgstr "矩形" #: kdevdesigner/designer/customwidgeteditor.ui:994 #, no-c-format msgid "Point" msgstr "点" #: kdevdesigner/designer/customwidgeteditor.ui:1004 #, no-c-format msgid "Pixmap" msgstr "像素图" #: kdevdesigner/designer/customwidgeteditor.ui:1009 #, no-c-format msgid "Palette" msgstr "调色板" #: kdevdesigner/designer/customwidgeteditor.ui:1014 #, no-c-format msgid "Cursor" msgstr "光标" #: kdevdesigner/designer/customwidgeteditor.ui:1019 #, no-c-format msgid "SizePolicy" msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:1026 #, no-c-format msgid "Select property type" msgstr "选择属性类型" #: kdevdesigner/designer/customwidgeteditor.ui:1029 #, no-c-format msgid "" "Select the type of the property.

    The property must be implemented " "in the class using Qt's property system.

    You can use integer types to " "support enumeration properties in the property editor.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:1065 #, no-c-format msgid "" "The list of the current widget's properties.

    The properties of the " "custom widget can be changed in the property editor.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:1073 #, no-c-format msgid "Change property name" msgstr "改变属性名称" #: kdevdesigner/designer/customwidgeteditor.ui:1076 #, no-c-format msgid "" "Enter a name for the property.

    The properties must be implemented " "in the class using Qt's property system.

    " msgstr "" #: kdevdesigner/designer/customwidgeteditor.ui:1084 #, no-c-format msgid "P&roperty name:" msgstr "属性名(&R):" #: kdevdesigner/designer/customwidgeteditor.ui:1095 #: languages/cpp/addattributedialogbase.ui:147 #, no-c-format msgid "T&ype:" msgstr "类型(&Y):" #: kdevdesigner/designer/dbconnection.ui:41 #, no-c-format msgid "Edit Database Connection" msgstr "编辑数据库连接" #: kdevdesigner/designer/dbconnection.ui:58 #, no-c-format msgid "&Database name:" msgstr "数据库名称(&D):" #: kdevdesigner/designer/dbconnection.ui:69 #, no-c-format msgid "&Username:" msgstr "用户名(&U):" #: kdevdesigner/designer/dbconnection.ui:80 #, no-c-format msgid "&Password:" msgstr "密码(&P):" #: kdevdesigner/designer/dbconnection.ui:91 #, no-c-format msgid "D&river:" msgstr "驱动程序(&R):" #: kdevdesigner/designer/dbconnection.ui:110 #, no-c-format msgid "&Hostname:" msgstr "主机名(&H):" #: kdevdesigner/designer/dbconnection.ui:151 #, no-c-format msgid "P&ort:" msgstr "端口(&O):" #: kdevdesigner/designer/dbconnectioneditor.ui:41 #, no-c-format msgid "Connect" msgstr "连接" #: kdevdesigner/designer/dbconnectioneditor.ui:94 #, no-c-format msgid "Connection Details" msgstr "连接细节" #: kdevdesigner/designer/dbconnections.ui:41 #, no-c-format msgid "Edit Database Connections" msgstr "编辑数据库连接" #: kdevdesigner/designer/dbconnections.ui:61 #, no-c-format msgid "&New Connection" msgstr "新建连接(&N)" #: kdevdesigner/designer/dbconnections.ui:74 #, no-c-format msgid "&Delete Connection" msgstr "删除连接(&D)" #: kdevdesigner/designer/dbconnections.ui:130 #: kdevdesigner/designer/editfunctions.ui:604 #: kdevdesigner/designer/formsettings.ui:477 #: kdevdesigner/designer/iconvieweditor.ui:361 #: kdevdesigner/designer/listboxeditor.ui:143 #: kdevdesigner/designer/listvieweditor.ui:694 #: kdevdesigner/designer/paletteeditor.ui:381 #: kdevdesigner/designer/paletteeditoradvanced.ui:603 #: kdevdesigner/designer/preferences.ui:560 #: kdevdesigner/designer/projectsettings.ui:244 #: kdevdesigner/designer/tableeditor.ui:154 #: kdevdesigner/designer/wizardeditor.ui:253 #, no-c-format msgid "Close the dialog and discard any changes." msgstr "关闭对话框并丢弃全部更改。" #: kdevdesigner/designer/dbconnections.ui:227 #, no-c-format msgid "Connec&t" msgstr "连接(&T)" #: kdevdesigner/designer/editfunctions.ui:47 #, no-c-format msgid "" "Edit Functions

    Add, edit or delete the current form's slots or " "functions.

    Click the Add Function-button to create a new " "function; enter a name, choose an access mode and specify if it should be a " "slot or normal function.

    Select an entry from the list and click the " "Delete Function-button to remove a function; in case of a slot all " "connections using this slot will also be removed.

    " msgstr "" #: kdevdesigner/designer/editfunctions.ui:73 #: languages/cpp/addmethoddialogbase.ui:61 #: languages/cpp/subclassingdlgbase.ui:128 #: languages/kjssupport/subclassingdlgbase.ui:93 #, no-c-format msgid "Return Type" msgstr "返回类型" #: kdevdesigner/designer/editfunctions.ui:84 #: languages/cpp/subclassingdlgbase.ui:117 #: languages/kjssupport/subclassingdlgbase.ui:82 #, no-c-format msgid "Specifier" msgstr "修饰符" #: kdevdesigner/designer/editfunctions.ui:117 #, no-c-format msgid "In Use" msgstr "使用中" #: kdevdesigner/designer/editfunctions.ui:150 #, fuzzy, no-c-format msgid "" "This form's functions.

    Select the function you want to change or " "delete.

    " msgstr "函数选择器

    选择一个函数,转至它的定义或者声明位置。" #: kdevdesigner/designer/editfunctions.ui:172 #, fuzzy, no-c-format msgid "Only d&isplay slots" msgstr "只显示槽(&L)" #: kdevdesigner/designer/editfunctions.ui:175 #, fuzzy, no-c-format msgid "Change displaying mode for functions" msgstr "制作内联函数" #: kdevdesigner/designer/editfunctions.ui:178 #, no-c-format msgid "" "Check this button if only the slots should be displayed

    Otherwise " "all functions, i.e. normal C++ functions and slots are displayed.

    \n" msgstr "" #: kdevdesigner/designer/editfunctions.ui:204 #, no-c-format msgid "&New Function" msgstr "新建函数(&N)" #: kdevdesigner/designer/editfunctions.ui:207 #, no-c-format msgid "Add new function" msgstr "添加新函数" #: kdevdesigner/designer/editfunctions.ui:210 #, no-c-format msgid "" "Add a new function.

    New functions have a default name and public " "access.

    " msgstr "" #: kdevdesigner/designer/editfunctions.ui:218 #, no-c-format msgid "&Delete Function" msgstr "删除函数(&D):" #: kdevdesigner/designer/editfunctions.ui:221 #, no-c-format msgid "Delete function" msgstr "删除函数" #: kdevdesigner/designer/editfunctions.ui:224 #, no-c-format msgid "" "Delete the selected function.

    All connections using this function " "are also removed.

    " msgstr "" #: kdevdesigner/designer/editfunctions.ui:242 #, no-c-format msgid "Function Properties" msgstr "函数属性" #: kdevdesigner/designer/editfunctions.ui:284 #, fuzzy, no-c-format msgid "&Function:" msgstr "函数(&U):" #: kdevdesigner/designer/editfunctions.ui:306 #, no-c-format msgid "Change function name" msgstr "更改函数名称" #: kdevdesigner/designer/editfunctions.ui:309 #, no-c-format msgid "" "Change the name of the selected function.

    The name should include " "the argument list and must be syntactically correct.

    " msgstr "" #: kdevdesigner/designer/editfunctions.ui:317 #, no-c-format msgid "&Return type:" msgstr "返回类型(&R):" #: kdevdesigner/designer/editfunctions.ui:339 #, no-c-format msgid "Change the return type of the function" msgstr "更改函数的返回类型" #: kdevdesigner/designer/editfunctions.ui:342 #, no-c-format msgid "" "Change the return type of the selected function.

    Specifiy here the " "datatype which should be returned by the function.

    " msgstr "" #: kdevdesigner/designer/editfunctions.ui:380 #, no-c-format msgid "S&pecifier:" msgstr "修饰符(&P):" #: kdevdesigner/designer/editfunctions.ui:392 #, fuzzy, no-c-format msgid "non virtual" msgstr "虚" #: kdevdesigner/designer/editfunctions.ui:397 #, fuzzy, no-c-format msgid "virtual" msgstr "虚" #: kdevdesigner/designer/editfunctions.ui:402 #, fuzzy, no-c-format msgid "pure virtual" msgstr "虚" #: kdevdesigner/designer/editfunctions.ui:407 #, fuzzy, no-c-format msgid "static" msgstr "开始" #: kdevdesigner/designer/editfunctions.ui:422 #: kdevdesigner/designer/editfunctions.ui:470 #, no-c-format msgid "Change function access" msgstr "更该函数访问" #: kdevdesigner/designer/editfunctions.ui:425 #: kdevdesigner/designer/editfunctions.ui:473 #, no-c-format msgid "" "Change the access policy of the function

    All functions are created " "virtual and should be reimplemented in subclasses.

    " msgstr "" #: kdevdesigner/designer/editfunctions.ui:505 #, no-c-format msgid "Change function type" msgstr "更改函数类型" #: kdevdesigner/designer/editfunctions.ui:508 #, no-c-format msgid "" "Change the type of the function.

    The type specifies if the function " "is either a slot or a normal C++ function.

    " msgstr "" #: kdevdesigner/designer/editfunctions.ui:590 #: kdevdesigner/designer/formsettings.ui:463 #: kdevdesigner/designer/iconvieweditor.ui:333 #: kdevdesigner/designer/listboxeditor.ui:115 #: kdevdesigner/designer/listvieweditor.ui:666 #: kdevdesigner/designer/paletteeditor.ui:367 #: kdevdesigner/designer/paletteeditoradvanced.ui:589 #: kdevdesigner/designer/preferences.ui:543 #: kdevdesigner/designer/projectsettings.ui:230 #: kdevdesigner/designer/tableeditor.ui:126 #: kdevdesigner/designer/wizardeditor.ui:225 #, no-c-format msgid "Close the dialog and apply all the changes." msgstr "关闭对话框并应用全部更改。" #: kdevdesigner/designer/finddialog.ui:41 #, no-c-format msgid "Find Text" msgstr "查找文本" #: kdevdesigner/designer/finddialog.ui:72 #, no-c-format msgid "F&ind:" msgstr "查找(&I):" #: kdevdesigner/designer/finddialog.ui:132 #, no-c-format msgid "&Find" msgstr "查找(&F)" #: kdevdesigner/designer/finddialog.ui:153 #: kdevdesigner/designer/replacedialog.ui:231 #, no-c-format msgid "Direction" msgstr "方向" #: kdevdesigner/designer/finddialog.ui:170 #: kdevdesigner/designer/replacedialog.ui:248 #, no-c-format msgid "Forwar&d" msgstr "向下(&D)" #: kdevdesigner/designer/finddialog.ui:181 #: kdevdesigner/designer/replacedialog.ui:259 #, no-c-format msgid "Bac&kward" msgstr "向上(&K)" #: kdevdesigner/designer/finddialog.ui:208 #: kdevdesigner/designer/replacedialog.ui:205 #, no-c-format msgid "&Whole words only" msgstr "整词匹配(&W)" #: kdevdesigner/designer/finddialog.ui:216 #: kdevdesigner/designer/replacedialog.ui:213 #, no-c-format msgid "Case &sensitive" msgstr "区分大小写(&S)" #: kdevdesigner/designer/finddialog.ui:224 #: kdevdesigner/designer/replacedialog.ui:221 #, no-c-format msgid "Start at &beginning" msgstr "从头开始(&B)" #: kdevdesigner/designer/formsettings.ui:47 #, no-c-format msgid "" "Form Settings

    Change settings for the form. Settings like " "Comment and Author are for your own use and are not required." msgstr "" #: kdevdesigner/designer/formsettings.ui:64 #, no-c-format msgid "Pixmaps" msgstr "" #: kdevdesigner/designer/formsettings.ui:81 #, no-c-format msgid "Save in&line" msgstr "嵌入保存(&L)" #: kdevdesigner/designer/formsettings.ui:87 #, no-c-format msgid "Save pixmaps in the .ui files" msgstr "" #: kdevdesigner/designer/formsettings.ui:90 #, no-c-format msgid "" "Save Inline

    Saves the pixmaps as binary data in the .ui files. " "Pixmaps saved like this are not shared between forms. We recommend using " "Project image files instead." msgstr "" #: kdevdesigner/designer/formsettings.ui:98 #, no-c-format msgid "Project &image file" msgstr "工程图像文件(&I)" #: kdevdesigner/designer/formsettings.ui:101 #, no-c-format msgid "Use the Project's Image file for pixmaps" msgstr "" #: kdevdesigner/designer/formsettings.ui:104 #, no-c-format msgid "" "Use the Project's Image file for pixmaps\n" "

    Each project may have a collection of pixmaps. If you use a project, we " "recommend that you use this option since it shares the images and is the " "fastest and most efficient way to use pixmaps in your forms.

    " msgstr "" #: kdevdesigner/designer/formsettings.ui:116 #, no-c-format msgid "" "Specify Pixmap-Loader function (only the function's name, no parentheses.)" msgstr "" #: kdevdesigner/designer/formsettings.ui:119 #, no-c-format msgid "" "Specify Pixmap-Loader function

    Specify the function which should be " "used for loading a pixmap in the generated code. Only enter the " "function's name, without parentheses." msgstr "" #: kdevdesigner/designer/formsettings.ui:127 #, no-c-format msgid "Use &function:" msgstr "使用函数(&F):" #: kdevdesigner/designer/formsettings.ui:130 #, no-c-format msgid "Use the given function for pixmaps" msgstr "" #: kdevdesigner/designer/formsettings.ui:133 #, no-c-format msgid "" "Use a given function for pixmaps

    If you choose this option you must " "define a function in the line edit at the right which will be used in the " "generated code for loading pixmaps. When choosing a pixmap in Qt " "Designer you will be asked to specify the arguments which will be passed " "to the function in the generated code.

    This approach makes it possible to " "use your own icon-loader function for loading pixmaps. Qt Designer " "cannot preview the correct image if you use your own function." msgstr "" #: kdevdesigner/designer/formsettings.ui:166 #, no-c-format msgid "Change class name" msgstr "更改类名" #: kdevdesigner/designer/formsettings.ui:169 #, no-c-format msgid "" "Enter the name of the class that will be created.

    classname.h and classname.cpp will be generated as C++ output when it is " "compiled by uic.

    " msgstr "" #: kdevdesigner/designer/formsettings.ui:177 #, no-c-format msgid "A&uthor:" msgstr "作者(&U):" #: kdevdesigner/designer/formsettings.ui:188 #, no-c-format msgid "Enter your name" msgstr "输入您的姓名" #: kdevdesigner/designer/formsettings.ui:191 #, no-c-format msgid "Enter your name." msgstr "输入您的姓名。" #: kdevdesigner/designer/formsettings.ui:221 #, no-c-format msgid "Enter a comment about the form." msgstr "" #: kdevdesigner/designer/formsettings.ui:242 #, no-c-format msgid "La&youts" msgstr "布局(&Y)" #: kdevdesigner/designer/formsettings.ui:278 #, no-c-format msgid "D&efault spacing:" msgstr "默认间距(&E):" #: kdevdesigner/designer/formsettings.ui:289 #, no-c-format msgid "Use func&tions:" msgstr "使用函数(&T):" #: kdevdesigner/designer/formsettings.ui:292 #, no-c-format msgid "Use functions to get the margin and spacing" msgstr "" #: kdevdesigner/designer/formsettings.ui:295 #, no-c-format msgid "" "Use a given function for margin and/or spacing

    If you choose this " "option you must define functions in the line edit below which will be used " "in the generated code for getting the margin and spacing value. Qt " "Designer cannot preview the correct margin or spacing if you use your " "own function. Instead, the default values will be used for preview." msgstr "" #: kdevdesigner/designer/formsettings.ui:322 #, no-c-format msgid "Default mar&gin:" msgstr "默认边距(&G):" #: kdevdesigner/designer/formsettings.ui:336 #, no-c-format msgid "S&pacing:" msgstr "间距(&P):" #: kdevdesigner/designer/formsettings.ui:358 #, no-c-format msgid "Ma&rgin:" msgstr "边距(&R):" #: kdevdesigner/designer/formsettings.ui:383 #, no-c-format msgid "Specify spacing function (only the function's name, no parentheses.)" msgstr "" #: kdevdesigner/designer/formsettings.ui:386 #, no-c-format msgid "" "Specify spacing function

    Specify the function which should be used " "for getting the spacing in the generated code. Only enter the function's " "name, without parentheses." msgstr "" #: kdevdesigner/designer/formsettings.ui:405 #, no-c-format msgid "Specify margin function (only the function's name, no parentheses.)" msgstr "" #: kdevdesigner/designer/formsettings.ui:408 #, no-c-format msgid "" "Specify margin function

    Specify the function which should be used " "for getting the margin in the generated code. Only enter the function's " "name, without parentheses." msgstr "" #: kdevdesigner/designer/gotolinedialog.ui:63 #, no-c-format msgid "&Line:" msgstr "行(&L):" #: kdevdesigner/designer/gotolinedialog.ui:116 #, no-c-format msgid "&Goto" msgstr "转到(&G)" #: kdevdesigner/designer/iconvieweditor.ui:41 #, no-c-format msgid "Edit Iconview" msgstr "编辑图标视图" #: kdevdesigner/designer/iconvieweditor.ui:47 #, no-c-format msgid "" "Edit Iconview

    Add, edit or delete items in the icon view.

    Click the New Item-button to create a new item, then enter text " "and choose a pixmap.

    Select an item from the view and click the " "Delete Item-button to remove the item from the iconview.

    " msgstr "" #: kdevdesigner/designer/iconvieweditor.ui:78 #, no-c-format msgid "All items in the iconview." msgstr "图标视图中的全部项目。" #: kdevdesigner/designer/iconvieweditor.ui:100 #: kdevdesigner/designer/listboxeditor.ui:273 #: kdevdesigner/designer/listvieweditor.ui:254 #, no-c-format msgid "&New Item" msgstr "新建项目(&N)" #: kdevdesigner/designer/iconvieweditor.ui:103 #: kdevdesigner/designer/listboxeditor.ui:276 #: kdevdesigner/designer/listvieweditor.ui:257 #, no-c-format msgid "Add an item" msgstr "添加项目" #: kdevdesigner/designer/iconvieweditor.ui:106 #, no-c-format msgid "Create a new item for the iconview." msgstr "在图标视图中创建新项目。" #: kdevdesigner/designer/iconvieweditor.ui:114 #: kdevdesigner/designer/listboxeditor.ui:287 #: kdevdesigner/designer/listvieweditor.ui:85 #, no-c-format msgid "&Delete Item" msgstr "删除项目(&D)" #: kdevdesigner/designer/iconvieweditor.ui:117 #: kdevdesigner/designer/listvieweditor.ui:88 #, no-c-format msgid "Delete item" msgstr "删除项目" #: kdevdesigner/designer/iconvieweditor.ui:120 #, no-c-format msgid "Delete the selected item." msgstr "删除选中的项目。" #: kdevdesigner/designer/iconvieweditor.ui:155 #: kdevdesigner/designer/listboxeditor.ui:164 #, no-c-format msgid "&Item Properties" msgstr "项目属性(&I)" #: kdevdesigner/designer/iconvieweditor.ui:172 #: kdevdesigner/designer/listboxeditor.ui:243 #: kdevdesigner/designer/listvieweditor.ui:135 #: kdevdesigner/designer/listvieweditor.ui:473 #, no-c-format msgid "&Text:" msgstr "文本(&T):" #: kdevdesigner/designer/iconvieweditor.ui:189 #: kdevdesigner/designer/listboxeditor.ui:260 #: kdevdesigner/designer/listvieweditor.ui:152 #, no-c-format msgid "Change text" msgstr "更改文本" #: kdevdesigner/designer/iconvieweditor.ui:192 #, no-c-format msgid "Change the text for the selected item." msgstr "更改选中项目的文本。" #: kdevdesigner/designer/iconvieweditor.ui:200 #: kdevdesigner/designer/listboxeditor.ui:181 #: kdevdesigner/designer/listvieweditor.ui:411 #, no-c-format msgid "&Pixmap:" msgstr "像素图(&P):" #: kdevdesigner/designer/iconvieweditor.ui:225 #: kdevdesigner/designer/listboxeditor.ui:192 #: kdevdesigner/designer/listvieweditor.ui:199 #: kdevdesigner/designer/listvieweditor.ui:422 #: kdevdesigner/designer/tableeditor.ui:310 #: kdevdesigner/designer/tableeditor.ui:577 #, no-c-format msgid "Label4" msgstr "Label4" #: kdevdesigner/designer/iconvieweditor.ui:245 #: kdevdesigner/designer/listboxeditor.ui:212 #: kdevdesigner/designer/listvieweditor.ui:219 #: kdevdesigner/designer/listvieweditor.ui:442 #: kdevdesigner/designer/tableeditor.ui:330 #: kdevdesigner/designer/tableeditor.ui:597 #, no-c-format msgid "Delete Pixmap" msgstr "删除像素图" #: kdevdesigner/designer/iconvieweditor.ui:248 #: kdevdesigner/designer/listboxeditor.ui:215 #, no-c-format msgid "Delete the selected item's pixmap." msgstr "删除选中项目的像素图。" #: kdevdesigner/designer/iconvieweditor.ui:268 #, no-c-format msgid "Select a pixmap file for the current item." msgstr "为当前项目选择像素图。" #: kdevdesigner/designer/iconvieweditor.ui:347 #: kdevdesigner/designer/listboxeditor.ui:129 #: kdevdesigner/designer/listvieweditor.ui:680 #: kdevdesigner/designer/tableeditor.ui:140 #: kdevdesigner/designer/wizardeditor.ui:239 #, no-c-format msgid "Apply all changes." msgstr "应用全部更改。" #: kdevdesigner/designer/kdevdesigner_part.rc:29 #: kdevdesigner/designer/kdevdesigner_part_sh.rc:36 #: parts/distpart/kdevpart_distpart.rc:4 src/kdevassistantui.rc:55 #: src/tdevelopui.rc:58 #, no-c-format msgid "&Project" msgstr "工程(&P)" #: kdevdesigner/designer/kdevdesigner_part.rc:73 #: kdevdesigner/designer/kdevdesigner_part_sh.rc:81 #, no-c-format msgid "File Toolbar" msgstr "文件工具栏" #: kdevdesigner/designer/kdevdesigner_part.rc:79 #: kdevdesigner/designer/kdevdesigner_part_sh.rc:87 #, no-c-format msgid "Edit Toolbar" msgstr "编辑工具栏" #: kdevdesigner/designer/kdevdesigner_part.rc:101 #: kdevdesigner/designer/kdevdesigner_part_sh.rc:96 #, no-c-format msgid "Layout Toolbar" msgstr "布局工具栏" #: kdevdesigner/designer/kdevdesigner_part.rc:114 #: kdevdesigner/designer/kdevdesigner_part_sh.rc:109 #: parts/tools/kdevpart_tools.rc:11 #, no-c-format msgid "Tools Toolbar" msgstr "工具工具栏" #: kdevdesigner/designer/listboxeditor.ui:41 #, no-c-format msgid "Edit Listbox" msgstr "编辑列表框" #: kdevdesigner/designer/listboxeditor.ui:47 #, no-c-format msgid "" "Edit Listbox

    Add, edit or delete items in the listbox.

    Click " "the New Item-button to create a new listbox entry, then enter text " "and choose a pixmap.

    Select an item from the list and click the " "Delete Item-button to remove the item from the list.

    " msgstr "" #: kdevdesigner/designer/listboxeditor.ui:156 #: kdevdesigner/designer/listvieweditor.ui:268 #, no-c-format msgid "The list of items." msgstr "项目列表。" #: kdevdesigner/designer/listboxeditor.ui:235 #, no-c-format msgid "Choose a pixmap file for the selected item." msgstr "为选中的项目选择像素图文件。" #: kdevdesigner/designer/listboxeditor.ui:263 #, no-c-format msgid "Change the selected item's text." msgstr "更改选中项目的文本。" #: kdevdesigner/designer/listboxeditor.ui:279 #, no-c-format msgid "Add a new item.

    New items are appended to the list.

    " msgstr "" #: kdevdesigner/designer/listboxeditor.ui:293 #, no-c-format msgid "Delete the selected item" msgstr "删除选中的项目" #: kdevdesigner/designer/listboxeditor.ui:324 #: kdevdesigner/designer/listvieweditor.ui:313 #: kdevdesigner/designer/listvieweditor.ui:576 #: kdevdesigner/designer/tableeditor.ui:230 #: kdevdesigner/designer/tableeditor.ui:461 #, no-c-format msgid "Move up" msgstr "上移" #: kdevdesigner/designer/listboxeditor.ui:327 #, fuzzy, no-c-format msgid "Moves the selected item up." msgstr "去掉所有选中的文件。" #: kdevdesigner/designer/listboxeditor.ui:341 #: kdevdesigner/designer/listvieweditor.ui:330 #: kdevdesigner/designer/listvieweditor.ui:545 #: kdevdesigner/designer/tableeditor.ui:247 #: kdevdesigner/designer/tableeditor.ui:483 #, no-c-format msgid "Move down" msgstr "下移" #: kdevdesigner/designer/listboxeditor.ui:344 #, fuzzy, no-c-format msgid "Move the selected item down." msgstr "去掉所有选中的文件。" #: kdevdesigner/designer/listeditor.ui:96 #, no-c-format msgid "Re&name" msgstr "重命名(&N)" #: kdevdesigner/designer/listvieweditor.ui:41 #, no-c-format msgid "Edit Listview" msgstr "编辑列表视图" #: kdevdesigner/designer/listvieweditor.ui:47 #, no-c-format msgid "" "Edit Listview

    Use the controls on the Items-tab to add, edit " "or delete items in the listview. Change the column configuration of the " "listview using the controls on the Columns-tab.

    Click the New " "Item-button to create a new item, then enter text and add a pixmap.

    Select an item from the list and click the Delete Item-button to " "remove the item from the list.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:91 #, no-c-format msgid "Deletes the selected item.

    Any sub-items are also deleted.

    " msgstr "删除选中项目。

    任何子项目也将被删除。

    " #: kdevdesigner/designer/listvieweditor.ui:107 #, no-c-format msgid "Item Properties" msgstr "项目属性" #: kdevdesigner/designer/listvieweditor.ui:124 #, no-c-format msgid "Pi&xmap:" msgstr "像素图(&X):" #: kdevdesigner/designer/listvieweditor.ui:155 #, no-c-format msgid "" "Change the text of the item.

    The text will be changed in the " "current column of the selected item.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:163 #, no-c-format msgid "Change column" msgstr "更改列" #: kdevdesigner/designer/listvieweditor.ui:166 #, no-c-format msgid "" "Select the current column.

    The item's text and pixmap will be " "changed for the current column

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:174 #, no-c-format msgid "Colu&mn:" msgstr "列(&M):" #: kdevdesigner/designer/listvieweditor.ui:222 #: kdevdesigner/designer/tableeditor.ui:333 #: kdevdesigner/designer/tableeditor.ui:600 #, no-c-format msgid "" "Delete the selected item's pixmap.

    The pixmap in the current column " "of the selected item will be deleted.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:242 #: kdevdesigner/designer/tableeditor.ui:353 #: kdevdesigner/designer/tableeditor.ui:620 #, no-c-format msgid "" "Select a pixmap file for the item.

    The pixmap will be changed in " "the current column of the selected item.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:260 #, no-c-format msgid "" "Adds a new item to the list.

    The item will be inserted at the top " "of the list and can be moved using the up- and down-buttons.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:276 #, no-c-format msgid "New &Subitem" msgstr "新建子项目(&S)" #: kdevdesigner/designer/listvieweditor.ui:279 #, no-c-format msgid "Add a subitem" msgstr "添加子项目" #: kdevdesigner/designer/listvieweditor.ui:282 #, no-c-format msgid "" "Create a new sub-item for the selected item.

    New sub-items are " "inserted at the top of the list of sub-items, and new levels are created " "automatically.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:316 #, no-c-format msgid "" "Move the selected item up.

    The item will be moved within its level " "in the hierarchy.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:333 #, no-c-format msgid "" "Move the selected item down.

    The item will be moved within its " "level in the hierarchy.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:347 #, no-c-format msgid "Move left" msgstr "左移" #: kdevdesigner/designer/listvieweditor.ui:350 #, no-c-format msgid "" "Move the selected item one level up.

    This will also change the " "level of the item's sub-items.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:364 #, no-c-format msgid "Move right" msgstr "右移" #: kdevdesigner/designer/listvieweditor.ui:367 #, no-c-format msgid "" "Move the selected item one level down.

    This will also change the " "level of the item's sub-items.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:377 #: kdevdesigner/designer/tableeditor.ui:168 #, no-c-format msgid "Co&lumns" msgstr "列(&L)" #: kdevdesigner/designer/listvieweditor.ui:394 #, no-c-format msgid "Column Properties" msgstr "列属性" #: kdevdesigner/designer/listvieweditor.ui:445 #, no-c-format msgid "Delete the pixmap of the selected column." msgstr "删除选中列的像素图。" #: kdevdesigner/designer/listvieweditor.ui:465 #, no-c-format msgid "" "Select a pixmap file for the selected column.

    The pixmap will be " "displayed in the header of the listview.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:490 #, no-c-format msgid "Enter column text" msgstr "输入列文本" #: kdevdesigner/designer/listvieweditor.ui:493 #, no-c-format msgid "" "Enter the text for the selected column.

    The text will be displayed " "in the header of the listview.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:501 #, no-c-format msgid "Clicka&ble" msgstr "可单击(&B)" #: kdevdesigner/designer/listvieweditor.ui:504 #, no-c-format msgid "" "If this option is checked, the selected column will react to mouse clicks on " "the header." msgstr "" #: kdevdesigner/designer/listvieweditor.ui:512 #, no-c-format msgid "Re&sizable" msgstr "可更改大小(&S)" #: kdevdesigner/designer/listvieweditor.ui:515 #, no-c-format msgid "The column's width will be resizable if this option is checked." msgstr "" #: kdevdesigner/designer/listvieweditor.ui:525 #: kdevdesigner/designer/tableeditor.ui:258 #, no-c-format msgid "&Delete Column" msgstr "删除列(&D)" #: kdevdesigner/designer/listvieweditor.ui:528 #, no-c-format msgid "Delete column" msgstr "删除列" #: kdevdesigner/designer/listvieweditor.ui:531 #, no-c-format msgid "Deletes the selected Column." msgstr "删除选中列。" #: kdevdesigner/designer/listvieweditor.ui:548 #, no-c-format msgid "" "Move the selected item down.

    The top-most column will be the first " "column in the list.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:556 #: kdevdesigner/designer/tableeditor.ui:266 #, no-c-format msgid "&New Column" msgstr "新建列(&N)" #: kdevdesigner/designer/listvieweditor.ui:559 #, no-c-format msgid "Add a Column" msgstr "添加列" #: kdevdesigner/designer/listvieweditor.ui:562 #, no-c-format msgid "" "Create a new column.

    New columns are appended at the end of (right " "of) the list and may be moved using the up- and down-buttons.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:579 #, no-c-format msgid "" "Move the selected item up.

    The top-most column will be the first " "column in the list.

    " msgstr "" #: kdevdesigner/designer/listvieweditor.ui:587 #, no-c-format msgid "The list of columns." msgstr "列列表。" #: kdevdesigner/designer/multilineeditor.ui:41 #, no-c-format msgid "Edit Text" msgstr "编辑文本" #: kdevdesigner/designer/multilineeditor.ui:44 #, no-c-format msgid "" "Multiline Edit

    This is a simple richtext editor. To improve its " "usability it provides toolbar items for the most common html tags: by " "clicking on a toolbar item, the corresponding tag will be written to the " "editor, where you can insert your text. If you have already written some " "text and want to format it, hilight it and click on the desired button. To " "improve visualization this editor also supports a simple html-syntax-" "highlighting scheme." msgstr "" #: kdevdesigner/designer/newform.ui:47 #, no-c-format msgid "" "New Form

    Select a template for the new form and click the OK-" "button to create it.

    " msgstr "" #: kdevdesigner/designer/newform.ui:115 #, no-c-format msgid "Create a new form using the selected template." msgstr "使用选中模板创建新表单。" #: kdevdesigner/designer/newform.ui:129 #, no-c-format msgid "Close the dialog without creating a new form." msgstr "关闭对话框而不创建新表单。" #: kdevdesigner/designer/newform.ui:151 #, no-c-format msgid "Displays a list of the available templates." msgstr "显示可用的模板列表。" #: kdevdesigner/designer/newform.ui:159 #, no-c-format msgid "&Insert into:" msgstr "插入到(&I):" #: kdevdesigner/designer/paletteeditor.ui:47 #, no-c-format msgid "Edit Palette" msgstr "编辑调色板" #: kdevdesigner/designer/paletteeditor.ui:70 #, no-c-format msgid "Build Palette" msgstr "构建调色板" #: kdevdesigner/designer/paletteeditor.ui:111 #, no-c-format msgid "&3-D effects:" msgstr "立体效果(&3):" #: kdevdesigner/designer/paletteeditor.ui:137 #: kdevdesigner/designer/paletteeditor.ui:195 #: kdevdesigner/designer/paletteeditoradvanced.ui:356 #: kdevdesigner/designer/paletteeditoradvanced.ui:523 #: kdevdesigner/designer/preferences.ui:417 #, no-c-format msgid "Choose a color" msgstr "选择颜色" #: kdevdesigner/designer/paletteeditor.ui:140 #, no-c-format msgid "Choose the effect-color for the generated palette." msgstr "" #: kdevdesigner/designer/paletteeditor.ui:169 #, no-c-format msgid "Back&ground:" msgstr "背景(&G):" #: kdevdesigner/designer/paletteeditor.ui:198 #, no-c-format msgid "Choose the background color for the generated palette." msgstr "" #: kdevdesigner/designer/paletteeditor.ui:223 #, no-c-format msgid "&Tune Palette..." msgstr "" #: kdevdesigner/designer/paletteeditor.ui:239 #, no-c-format msgid "Preview" msgstr "预览" #: kdevdesigner/designer/paletteeditor.ui:270 #: kdevdesigner/designer/paletteeditoradvanced.ui:87 #, no-c-format msgid "Select &palette:" msgstr "选择调色板(&P):" #: kdevdesigner/designer/paletteeditor.ui:279 #: kdevdesigner/designer/paletteeditoradvanced.ui:96 #, no-c-format msgid "Active Palette" msgstr "激活的调色板" #: kdevdesigner/designer/paletteeditor.ui:284 #: kdevdesigner/designer/paletteeditoradvanced.ui:101 #, no-c-format msgid "Inactive Palette" msgstr "非激活调色板" #: kdevdesigner/designer/paletteeditor.ui:289 #: kdevdesigner/designer/paletteeditoradvanced.ui:106 #, no-c-format msgid "Disabled Palette" msgstr "禁用的调色板" #: kdevdesigner/designer/paletteeditoradvanced.ui:44 #, no-c-format msgid "Tune Palette" msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:50 #, no-c-format msgid "" "Edit Palette

    Change the current widget or form's palette.

    Use " "a generated palette or select colors for each color group and each color " "role.

    The palette can be tested with different widget layouts in the " "preview section.

    " msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:126 #, no-c-format msgid "Auto" msgstr "自动" #: kdevdesigner/designer/paletteeditoradvanced.ui:143 #, no-c-format msgid "Build the &inactive palette from the active palette" msgstr "从活动调色板构建非活动调色板(&I)" #: kdevdesigner/designer/paletteeditoradvanced.ui:154 #, no-c-format msgid "Build the &disabled palette from the active palette" msgstr "从活动调色板构建禁用的调色板(&D)" #: kdevdesigner/designer/paletteeditoradvanced.ui:167 #, no-c-format msgid "Central Color Roles" msgstr "中心颜色角色" #: kdevdesigner/designer/paletteeditoradvanced.ui:182 #, no-c-format msgid "Background" msgstr "背景" #: kdevdesigner/designer/paletteeditoradvanced.ui:187 #, no-c-format msgid "Foreground" msgstr "前景" #: kdevdesigner/designer/paletteeditoradvanced.ui:192 #, no-c-format msgid "Button" msgstr "按钮" #: kdevdesigner/designer/paletteeditoradvanced.ui:197 #, no-c-format msgid "Base" msgstr "基色" #: kdevdesigner/designer/paletteeditoradvanced.ui:207 #, no-c-format msgid "BrightText" msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:212 #, no-c-format msgid "ButtonText" msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:217 #, no-c-format msgid "Highlight" msgstr "加亮" #: kdevdesigner/designer/paletteeditoradvanced.ui:222 #, no-c-format msgid "HighlightText" msgstr "加亮文本" #: kdevdesigner/designer/paletteeditoradvanced.ui:227 #, no-c-format msgid "Link" msgstr "链接" #: kdevdesigner/designer/paletteeditoradvanced.ui:232 #, no-c-format msgid "LinkVisited" msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:239 #, no-c-format msgid "Choose the central color role" msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:242 #, no-c-format msgid "" "Select a color role.

    Available central color roles are:

      " "
    • Background - general background color.
    • Foreground - general " "foreground color.
    • Base - used as the background color for example, " "for text entry widgets; it is usually white or another light color.
    • " "
    • Text - the forground color used with Base. Usually this is the same as " "the Foreground, in which case it must provide good contrast both with the " "Background and with the Base.
    • Button - general button background " "color; useful where buttons need a background different from Background, as " "in the Macintosh style.
    • ButtonText - a foreground color used with " "the Button color.
    • Highlight - a color used to indicate a selected " "or highlighted item.
    • HighlightedText - a text color that contrasts " "to Highlight.
    • BrightText - a text color that is very different " "from Foreground and contrasts well with, for example, black.

    " msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:287 #, no-c-format msgid "Choose pi&xmap:" msgstr "选择像素图(&X):" #: kdevdesigner/designer/paletteeditoradvanced.ui:310 #: kdevdesigner/designer/preferences.ui:476 #, no-c-format msgid "Select a pixmap" msgstr "选择像素图" #: kdevdesigner/designer/paletteeditoradvanced.ui:313 #, no-c-format msgid "Choose a pixmap file for the selected central color role." msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:333 #, no-c-format msgid "&Select color:" msgstr "选择颜色(&S):" #: kdevdesigner/designer/paletteeditoradvanced.ui:359 #, no-c-format msgid "Choose a color for the selected central color role." msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:371 #, no-c-format msgid "3-D Shadow Effects" msgstr "立体阴影效果" #: kdevdesigner/designer/paletteeditoradvanced.ui:402 #, no-c-format msgid "Build &from button color:" msgstr "从按钮颜色生成(&F):" #: kdevdesigner/designer/paletteeditoradvanced.ui:408 #, no-c-format msgid "Generate shadings" msgstr "生成阴影" #: kdevdesigner/designer/paletteeditoradvanced.ui:411 #, no-c-format msgid "Check to let 3D-effect colors be calculated from the button-color." msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:417 #, no-c-format msgid "Light" msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:422 #, no-c-format msgid "Midlight" msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:427 #, no-c-format msgid "Mid" msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:432 #, no-c-format msgid "Dark" msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:437 #, no-c-format msgid "Shadow" msgstr "阴影" #: kdevdesigner/designer/paletteeditoradvanced.ui:444 #, no-c-format msgid "Choose 3D-effect color role" msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:447 #, no-c-format msgid "" "Select a color effect role.

    Available effect roles are:

      " "
    • Light - lighter than Button color.
    • Midlight - between Button " "and Light.
    • Mid - between Button and Dark.
    • Dark - darker " "than Button.
    • Shadow - a very dark color.
    " msgstr "" #: kdevdesigner/designer/paletteeditoradvanced.ui:500 #, no-c-format msgid "Select co&lor:" msgstr "选择颜色(&L):" #: kdevdesigner/designer/paletteeditoradvanced.ui:526 #, no-c-format msgid "Choose a color for the selected effect color role." msgstr "" #: kdevdesigner/designer/pixmapcollectioneditor.ui:41 #, no-c-format msgid "Manage Image Collection" msgstr "管理图像收藏" #: kdevdesigner/designer/pixmapcollectioneditor.ui:135 #, no-c-format msgid "C&lose" msgstr "关闭(&L)" #: kdevdesigner/designer/pixmapfunction.ui:41 #, no-c-format msgid "Choose Pixmap" msgstr "选择像素图" #: kdevdesigner/designer/pixmapfunction.ui:61 #, no-c-format msgid "&Enter arguments for loading the pixmap:" msgstr "输入装入像素图的参数(&E):" #: kdevdesigner/designer/pixmapfunction.ui:349 #, no-c-format msgid "QPixmap(" msgstr "" #: kdevdesigner/designer/pixmapfunction.ui:865 #, no-c-format msgid ")" msgstr ")" #: kdevdesigner/designer/preferences.ui:47 #, no-c-format msgid "" "Preferences

    Change the preferences of Qt Designer. There is always " "one tab with general preferences. There may be additional tabs, depending on " "which plugins are installed.

    " msgstr "" "首选项

    更改 Qt 设计师的首选项。常规首选项标签是必有的,而其它额外的" "标签取决于安装了何种插件。

    " #: kdevdesigner/designer/preferences.ui:79 #, no-c-format msgid "File Saving" msgstr "文件保存" #: kdevdesigner/designer/preferences.ui:90 #, no-c-format msgid "Enable auto sa&ve" msgstr "启用自动保存(&V)" #: kdevdesigner/designer/preferences.ui:109 #, no-c-format msgid "Auto save &interval:" msgstr "自动保存间隔(&I):" #: kdevdesigner/designer/preferences.ui:136 #, no-c-format msgid "Plu&gin Paths" msgstr "插件路径(&G)" #: kdevdesigner/designer/preferences.ui:166 #: kdevdesigner/designer/preferences.ui:217 #, no-c-format msgid "" "A splash screen is displayed when starting Qt Designer if this option is " "checked." msgstr "" #: kdevdesigner/designer/preferences.ui:174 #: parts/ctags2/ctags2_settingswidgetbase.ui:28 #, no-c-format msgid "Ge&neral" msgstr "常规(&N)" #: kdevdesigner/designer/preferences.ui:191 #, no-c-format msgid "Restore last &workspace on startup" msgstr "启动时恢复上次的工作区(&W)" #: kdevdesigner/designer/preferences.ui:197 #, no-c-format msgid "Restore last workspace" msgstr "恢复上次的工作区" #: kdevdesigner/designer/preferences.ui:200 #, no-c-format msgid "" "The current workspace settings will be restored the next time you start Qt " "Designer if this option is checked." msgstr "" #: kdevdesigner/designer/preferences.ui:208 #, no-c-format msgid "Show &splash screen on startup" msgstr "启动时显示飞溅屏幕(&S)" #: kdevdesigner/designer/preferences.ui:214 #, no-c-format msgid "Show Splashscreen" msgstr "显示飞溅屏幕" #: kdevdesigner/designer/preferences.ui:225 #, no-c-format msgid "Show start &dialog" msgstr "显示启动对话框(&D)" #: kdevdesigner/designer/preferences.ui:236 #, no-c-format msgid "Disable data&base auto-edit in preview" msgstr "禁用预览中的数据库自动编辑(&B)" #: kdevdesigner/designer/preferences.ui:247 #, no-c-format msgid "Show toolbutton lab&els" msgstr "显示工具按钮标签(&E)" #: kdevdesigner/designer/preferences.ui:250 #, no-c-format msgid "Text Labels" msgstr "文本标签" #: kdevdesigner/designer/preferences.ui:253 #, no-c-format msgid "Text labels will be used in the toolbars if this is checked." msgstr "" #: kdevdesigner/designer/preferences.ui:263 #, no-c-format msgid "G&rid" msgstr "网格(&R)" #: kdevdesigner/designer/preferences.ui:286 #, no-c-format msgid "Sn&ap to grid" msgstr "吸附到网格(&A)" #: kdevdesigner/designer/preferences.ui:292 #, no-c-format msgid "Snap to the grid" msgstr "吸附到网格" #: kdevdesigner/designer/preferences.ui:295 #, no-c-format msgid "" "Customize the grid-settings for all forms.

    When Snap to Grid " "is checked, the widgets snap to the grid using the the X/Y resolution.

    " msgstr "" #: kdevdesigner/designer/preferences.ui:326 #: kdevdesigner/designer/preferences.ui:346 #, no-c-format msgid "Grid resolution" msgstr "网格分辨率" #: kdevdesigner/designer/preferences.ui:329 #: kdevdesigner/designer/preferences.ui:349 #, no-c-format msgid "" "Customize the grid-settings for all forms.

    When Show Grid is " "checked, a grid is shown on all forms using the X/Y resolution.

    " msgstr "" #: kdevdesigner/designer/preferences.ui:357 #, no-c-format msgid "Grid-&X:" msgstr "横向(&X):" #: kdevdesigner/designer/preferences.ui:368 #, no-c-format msgid "Grid-&Y:" msgstr "纵向(&Y):" #: kdevdesigner/designer/preferences.ui:383 #, no-c-format msgid "Backgro&und" msgstr "背景(&U)" #: kdevdesigner/designer/preferences.ui:420 #, no-c-format msgid "Select a color in the color dialog." msgstr "在颜色对话框中选择一种颜色。" #: kdevdesigner/designer/preferences.ui:431 #, no-c-format msgid "Co&lor" msgstr "颜色(&L)" #: kdevdesigner/designer/preferences.ui:434 #, no-c-format msgid "Use a background color" msgstr "使用背景色" #: kdevdesigner/designer/preferences.ui:437 #, no-c-format msgid "Use a background color." msgstr "使用背景色。" #: kdevdesigner/designer/preferences.ui:445 #, no-c-format msgid "&Pixmap" msgstr "像素图(&P)" #: kdevdesigner/designer/preferences.ui:451 #, no-c-format msgid "Use a background pixmap" msgstr "使用后台像素图" #: kdevdesigner/designer/preferences.ui:454 #, no-c-format msgid "Use a background pixmap." msgstr "使用后台像素图。" #: kdevdesigner/designer/preferences.ui:479 #, no-c-format msgid "Choose a pixmap file." msgstr "选择像素图文件。" #: kdevdesigner/designer/previewwidget.ui:47 #, no-c-format msgid "Preview Window" msgstr "上一个窗口" #: kdevdesigner/designer/previewwidget.ui:92 #, no-c-format msgid "ButtonGroup" msgstr "按钮组" #: kdevdesigner/designer/previewwidget.ui:109 #, no-c-format msgid "RadioButton1" msgstr "" #: kdevdesigner/designer/previewwidget.ui:120 #, no-c-format msgid "RadioButton2" msgstr "" #: kdevdesigner/designer/previewwidget.ui:128 #, no-c-format msgid "RadioButton3" msgstr "" #: kdevdesigner/designer/previewwidget.ui:138 #, fuzzy, no-c-format msgid "ButtonGroup2" msgstr "编译分组" #: kdevdesigner/designer/previewwidget.ui:155 #, no-c-format msgid "CheckBox1" msgstr "复选框1" #: kdevdesigner/designer/previewwidget.ui:166 #, no-c-format msgid "CheckBox2" msgstr "复选框2" #: kdevdesigner/designer/previewwidget.ui:200 #, no-c-format msgid "LineEdit" msgstr "行编辑" #: kdevdesigner/designer/previewwidget.ui:206 #, no-c-format msgid "ComboBox" msgstr "复选框" #: kdevdesigner/designer/previewwidget.ui:237 #, no-c-format msgid "PushButton" msgstr "按钮" #: kdevdesigner/designer/previewwidget.ui:269 #, no-c-format msgid "" "

    \n" "http://www.trolltech.com\n" "

    \n" "

    \n" "http://www.kde.org\n" "

    " msgstr "" "

    \n" "http://www.trolltech.com\n" "

    \n" "

    \n" "http://www.kde.org\n" "

    " #: kdevdesigner/designer/projectsettings.ui:41 #, no-c-format msgid "Project Settings" msgstr "工程设置" #: kdevdesigner/designer/projectsettings.ui:76 #, no-c-format msgid "&Project file:" msgstr "工程文件(&P):" #: kdevdesigner/designer/projectsettings.ui:87 #, no-c-format msgid "&Language:" msgstr "语言(&L):" #: kdevdesigner/designer/projectsettings.ui:111 #, no-c-format msgid "&Database file:" msgstr "数据库文件(&D):" #: kdevdesigner/designer/replacedialog.ui:41 #, no-c-format msgid "Replace Text" msgstr "替换文本" #: kdevdesigner/designer/replacedialog.ui:72 #, no-c-format msgid "R&eplace:" msgstr "替换(&E):" #: kdevdesigner/designer/replacedialog.ui:83 #, no-c-format msgid "&Find:" msgstr "查找(&F):" #: kdevdesigner/designer/replacedialog.ui:159 #, no-c-format msgid "&Replace" msgstr "替换(&R)" #: kdevdesigner/designer/replacedialog.ui:170 #, no-c-format msgid "Replace &All" msgstr "全部替换(&A)" #: kdevdesigner/designer/richtextfontdialog.ui:41 #, no-c-format msgid "Font Properties" msgstr "字体属性" #: kdevdesigner/designer/richtextfontdialog.ui:85 #, no-c-format msgid "&Font:" msgstr "字体(&F):" #: kdevdesigner/designer/richtextfontdialog.ui:96 #, no-c-format msgid "Rel. &size:" msgstr "相对大小(&S):" #: kdevdesigner/designer/richtextfontdialog.ui:124 #, no-c-format msgid "C&olor:" msgstr "颜色(&O):" #: kdevdesigner/designer/richtextfontdialog.ui:133 #, no-c-format msgid "0" msgstr "0" #: kdevdesigner/designer/richtextfontdialog.ui:138 #, no-c-format msgid "-4" msgstr "-4" #: kdevdesigner/designer/richtextfontdialog.ui:143 #, no-c-format msgid "-3" msgstr "-3" #: kdevdesigner/designer/richtextfontdialog.ui:148 #, no-c-format msgid "-2" msgstr "-2" #: kdevdesigner/designer/richtextfontdialog.ui:153 #, no-c-format msgid "-1" msgstr "-1" #: kdevdesigner/designer/richtextfontdialog.ui:158 #, no-c-format msgid "+1" msgstr "+1" #: kdevdesigner/designer/richtextfontdialog.ui:163 #, no-c-format msgid "+2" msgstr "+2" #: kdevdesigner/designer/richtextfontdialog.ui:168 #, no-c-format msgid "+3" msgstr "+3" #: kdevdesigner/designer/richtextfontdialog.ui:173 #, no-c-format msgid "+4" msgstr "+4" #: kdevdesigner/designer/startdialog.ui:49 #, no-c-format msgid "Qt Designer - New/Open" msgstr "Qt 设计师 - 新建/打开" #: kdevdesigner/designer/startdialog.ui:73 #, no-c-format msgid "&New File/Project" msgstr "新建文件/工程(&N)" #: kdevdesigner/designer/startdialog.ui:106 #, no-c-format msgid "&Open File/Project" msgstr "打开文件/工程(&O)" #: kdevdesigner/designer/startdialog.ui:125 #, no-c-format msgid "&Recently Opened" msgstr "最近打开的文件(&R)" #: kdevdesigner/designer/startdialog.ui:178 #, no-c-format msgid "&Do not show this dialog in the future" msgstr "以后不再显示此对话框(&D)" #: kdevdesigner/designer/tableeditor.ui:41 #, no-c-format msgid "Edit Table" msgstr "编辑表" #: kdevdesigner/designer/tableeditor.ui:233 #: kdevdesigner/designer/tableeditor.ui:464 #, no-c-format msgid "" "Move the selected item up.

    The top-most column will be the first " "column of the list.

    " msgstr "" #: kdevdesigner/designer/tableeditor.ui:250 #: kdevdesigner/designer/tableeditor.ui:486 #, no-c-format msgid "" "Move the selected item down.

    The top-most column will be the first " "column of the list.

    " msgstr "" #: kdevdesigner/designer/tableeditor.ui:288 #, no-c-format msgid "Table:" msgstr "表:" #: kdevdesigner/designer/tableeditor.ui:363 #: kdevdesigner/designer/tableeditor.ui:541 #, no-c-format msgid "&Label:" msgstr "标签(&L):" #: kdevdesigner/designer/tableeditor.ui:385 #, no-c-format msgid "&Field:" msgstr "字段(&F):" #: kdevdesigner/designer/tableeditor.ui:409 #, no-c-format msgid "" msgstr "<无表>" #: kdevdesigner/designer/tableeditor.ui:421 #, no-c-format msgid "&Rows" msgstr "行(&R)" #: kdevdesigner/designer/tableeditor.ui:511 #, no-c-format msgid "&New Row" msgstr "新建行(&N)" #: kdevdesigner/designer/tableeditor.ui:519 #, no-c-format msgid "&Delete Row" msgstr "删除行(&D)" #: kdevdesigner/designer/variabledialog.ui:105 #, no-c-format msgid "Variable Properties" msgstr "变量属性" #: kdevdesigner/designer/variabledialog.ui:122 #, no-c-format msgid "Acc&ess:" msgstr "访问(&E):" #: kdevdesigner/designer/variabledialog.ui:133 #, no-c-format msgid "&Variable:" msgstr "变量(&V):" #: kdevdesigner/designer/wizardeditor.ui:41 #, no-c-format msgid "Wizard Page Editor" msgstr "向导页面编辑器" #: kdevdesigner/designer/wizardeditor.ui:86 #, no-c-format msgid "Wizard pages:" msgstr "向导页面:" #: kdevdesigner/designer/wizardeditor.ui:115 #, no-c-format msgid "A&dd" msgstr "添加(&D)" #: languages/ada/addclassdlg.ui:16 #, no-c-format msgid "Add Class" msgstr "添加类" #: languages/ada/addclassdlg.ui:30 #, no-c-format msgid "&Implements" msgstr "实现(&I)" #: languages/ada/addclassdlg.ui:38 #, no-c-format msgid "&Class" msgstr "类(&C)" #: languages/ada/addclassdlg.ui:72 #, no-c-format msgid "&Abstract" msgstr "抽象(&A)" #: languages/ada/addclassdlg.ui:80 #, no-c-format msgid "&Interface" msgstr "接口(&I)" #: languages/ada/addclassdlg.ui:117 #, no-c-format msgid "&Public" msgstr "公有(&P)" #: languages/ada/addclassdlg.ui:128 #, no-c-format msgid "P&rotected" msgstr "保护(&R)" #: languages/ada/addclassdlg.ui:136 #, no-c-format msgid "Pri&vate" msgstr "私有(&V)" #: languages/ada/addclassdlg.ui:146 #, no-c-format msgid "&Final" msgstr "最终(&F)" #: languages/ada/addclassdlg.ui:170 #, no-c-format msgid "&Extends:" msgstr "扩展(&E):" #: languages/ada/addclassdlg.ui:202 #, no-c-format msgid "&Source path:" msgstr "源代码路径(&S):" #: languages/ada/addclassdlg.ui:227 #, no-c-format msgid "&Create default constructor" msgstr "创建默认的构造函数(&C)" #: languages/ada/addclassdlg.ui:238 #, no-c-format msgid "Create &main method" msgstr "创建主方法 &main" #: languages/ada/addclassdlg.ui:248 #, no-c-format msgid "&Documentation" msgstr "文档(&D)" #: languages/ada/addclassdlg.ui:260 parts/distpart/distpart_ui.ui:424 #, no-c-format msgid "&License:" msgstr "许可协议(&L):" #: languages/ada/addclassdlg.ui:269 #, no-c-format msgid "LGPL" msgstr "LGPL" #: languages/ada/addclassdlg.ui:274 #, no-c-format msgid "GPL" msgstr "GPL" #: languages/ada/addclassdlg.ui:279 #, no-c-format msgid "QPL" msgstr "QPL" #: languages/ada/configproblemreporter.ui:24 #: languages/java/configproblemreporter.ui:46 #: languages/pascal/configproblemreporter.ui:24 #, no-c-format msgid "&Enable background parsing" msgstr "启用后台分析(&E)" #: languages/cpp/addattributedialogbase.ui:16 #, no-c-format msgid "Add Attribute" msgstr "添加属性" #: languages/cpp/addattributedialogbase.ui:39 #: languages/cpp/addmethoddialogbase.ui:50 #, no-c-format msgid "Storage" msgstr "存储" #: languages/cpp/addattributedialogbase.ui:61 #: languages/cpp/addmethoddialogbase.ui:72 #, no-c-format msgid "Declarator" msgstr "声明" #: languages/cpp/addattributedialogbase.ui:110 #, no-c-format msgid "&Add Attribute" msgstr "添加属性(&A)" #: languages/cpp/addattributedialogbase.ui:118 #, no-c-format msgid "&Delete Attribute" msgstr "删除属性(&D)" #: languages/cpp/addattributedialogbase.ui:128 #, no-c-format msgid "Attribute Properties" msgstr "属性特性" #: languages/cpp/addattributedialogbase.ui:171 #: languages/cpp/addmethoddialogbase.ui:182 #, no-c-format msgid "D&eclarator:" msgstr "声明(&E):" #: languages/cpp/addattributedialogbase.ui:197 #: languages/cpp/addmethoddialogbase.ui:208 #, no-c-format msgid "S&torage:" msgstr "存储(&T):" #: languages/cpp/addattributedialogbase.ui:208 #: languages/cpp/addmethoddialogbase.ui:227 #, no-c-format msgid "Acce&ss:" msgstr "访问(&S):" #: languages/cpp/addmethoddialogbase.ui:16 #, no-c-format msgid "Add Method" msgstr "添加方法" #: languages/cpp/addmethoddialogbase.ui:28 #, no-c-format msgid "Inline" msgstr "内联" #: languages/cpp/addmethoddialogbase.ui:121 #, no-c-format msgid "&Add Method" msgstr "添加方法(&A)" #: languages/cpp/addmethoddialogbase.ui:129 #, no-c-format msgid "&Delete Method" msgstr "删除方法(&D)" #: languages/cpp/addmethoddialogbase.ui:139 #, no-c-format msgid "Method Properties" msgstr "方法属性" #: languages/cpp/addmethoddialogbase.ui:158 #, no-c-format msgid "Return t&ype:" msgstr "返回类型(&Y):" #: languages/cpp/addmethoddialogbase.ui:219 #, no-c-format msgid "&Inline" msgstr "内联(&I)" #: languages/cpp/addmethoddialogbase.ui:247 #, no-c-format msgid "I&mplementation File" msgstr "实现文件(&M)" #: languages/cpp/app_templates/kapp/appui.rc:4 #: languages/cpp/app_templates/khello/appui.rc:4 #: languages/cpp/app_templates/khello2/appui.rc:4 #: languages/java/app_templates/kappjava/appui.rc:4 #: languages/ruby/app_templates/kapp/appui.rc:4 #, no-c-format msgid "C&ustom" msgstr "自定义(&U)" #: languages/cpp/app_templates/kde4app/kapp4.kcfg:9 #: languages/cpp/app_templates/kscons_kxt/app.kcfg:9 #: languages/cpp/app_templates/kxt/app.kcfg:9 #: languages/cpp/app_templates/tdeconfig35/app.kcfg:9 #: languages/ruby/app_templates/kxt/app.kcfg:9 #, no-c-format msgid "color of the background" msgstr "" #: languages/cpp/app_templates/kde4app/kapp4.kcfg:13 #: languages/cpp/app_templates/kscons_kxt/app.kcfg:13 #: languages/cpp/app_templates/kxt/app.kcfg:13 #: languages/cpp/app_templates/tdeconfig35/app.kcfg:13 #: languages/ruby/app_templates/kxt/app.kcfg:13 #, no-c-format msgid "color of the foreground" msgstr "" #: languages/cpp/app_templates/kde4app/kapp4.kcfg:17 #: languages/cpp/app_templates/kscons_kxt/app.kcfg:17 #: languages/cpp/app_templates/kxt/app.kcfg:17 #: languages/cpp/app_templates/tdeconfig35/app.kcfg:17 #: languages/ruby/app_templates/kxt/app.kcfg:17 #, no-c-format msgid "size of a ball" msgstr "" #: languages/cpp/app_templates/kde4app/kapp4view_base.ui:13 #: languages/cpp/app_templates/kxt/appview_base.ui:16 #: languages/cpp/app_templates/tdeconfig35/appview_base.ui:16 #, no-c-format msgid "%{APPNAMELC}_base" msgstr "%{APPNAMELC}_base" #: languages/cpp/app_templates/kde4app/kapp4view_base.ui:194 #: languages/cpp/app_templates/kscons_kxt/appview_base.ui:29 #: languages/cpp/app_templates/kxt/appview_base.ui:27 #: languages/cpp/app_templates/tdeconfig35/appview_base.ui:27 #: languages/ruby/app_templates/kxt/appview_base.ui:27 #, no-c-format msgid "hello, world" msgstr "hello, world" #: languages/cpp/app_templates/kde4app/kde4appui.rc:4 #: languages/cpp/app_templates/kscons_kxt/appui.rc:4 #: languages/cpp/app_templates/kxt/appui.rc:4 #: languages/cpp/app_templates/tdeconfig35/appui.rc:4 #: languages/ruby/app_templates/kxt/appui.rc:4 #, no-c-format msgid "&Move" msgstr "移动(&M)" #: languages/cpp/app_templates/kde4app/prefs_base.ui:16 #: languages/cpp/app_templates/kscons_kxt/prefs-base.ui:26 #: languages/cpp/app_templates/kxt/prefs-base.ui:24 #: languages/cpp/app_templates/tdeconfig35/prefs-base.ui:24 #: languages/ruby/app_templates/kxt/prefs-base.ui:24 #, no-c-format msgid "Background color:" msgstr "背景色:" #: languages/cpp/app_templates/kde4app/prefs_base.ui:26 #, fuzzy, no-c-format msgid "Choose a new background color" msgstr "使用背景色" #: languages/cpp/app_templates/kde4app/prefs_base.ui:29 #, no-c-format msgid "" "\n" "

    Change the background color by clicking here and choose the " "new color in the color dialog.

    " msgstr "" #: languages/cpp/app_templates/kde4app/prefs_base.ui:42 #: languages/cpp/app_templates/kscons_kxt/prefs-base.ui:42 #: languages/cpp/app_templates/kxt/prefs-base.ui:40 #: languages/cpp/app_templates/tdeconfig35/prefs-base.ui:40 #: languages/ruby/app_templates/kxt/prefs-base.ui:40 #, no-c-format msgid "Project age:" msgstr "工程年龄:" #: languages/cpp/app_templates/kde4app/prefs_base.ui:52 #: languages/cpp/app_templates/kscons_kxt/prefs-base.ui:50 #: languages/cpp/app_templates/kxt/prefs-base.ui:48 #: languages/cpp/app_templates/tdeconfig35/prefs-base.ui:48 #: languages/ruby/app_templates/kxt/prefs-base.ui:48 #, no-c-format msgid "Foreground color:" msgstr "前景色:" #: languages/cpp/app_templates/kde4app/prefs_base.ui:62 #, fuzzy, no-c-format msgid "Choose a new foreground color" msgstr "使用背景色" #: languages/cpp/app_templates/kde4app/prefs_base.ui:65 #, no-c-format msgid "" "\n" "

    Change the foreground color by clicking here and choose the " "new color in the color dialog.

    " msgstr "" #: languages/cpp/app_templates/kde4app/prefs_base.ui:110 #, no-c-format msgid "Set the project age (in days)" msgstr "" #: languages/cpp/app_templates/kde4app/prefs_base.ui:113 #, no-c-format msgid "Change the project age (in days) by choosing a new number of days." msgstr "" #: languages/cpp/app_templates/khello2/widgetbase.ui:27 #, no-c-format msgid "Click Me!" msgstr "Click Me!" #: languages/cpp/app_templates/kmake/mainview.ui:59 #, no-c-format msgid "Hello" msgstr "Hello" #: languages/cpp/app_templates/kscons_kxt/appview_base.ui:18 #, no-c-format msgid "%{APPNAME}_base" msgstr "%{APPNAME}_base" #: languages/cpp/app_templates/kscons_tdemdi/prefs.ui:24 #, no-c-format msgid "Show close buttons on the right of tabs" msgstr "在标签右侧显示关闭按钮" #: languages/cpp/app_templates/opieapp/examplebase.ui:32 #: languages/cpp/app_templates/qtopiaapp/examplebase.ui:32 #, no-c-format msgid "" "

    This is just an %{APPNAMELC}; it does not do anything interesting " "at all." msgstr "

    这仅仅是 %{APPNAMELC};它不做任何事情。" #: languages/cpp/app_templates/qtopia4app/examplebase.ui:28 #, fuzzy, no-c-format msgid "This is just an %{APPNAME}. It doesn't do anything interesting at all." msgstr "

    这仅仅是 %{APPNAMELC};它不做任何事情。" #: languages/cpp/app_templates/tdescreensaver/tdescreensaverui.ui:18 #, no-c-format msgid "Screen Saver Config" msgstr "屏幕保护配置" #: languages/cpp/app_templates/tdescreensaver/tdescreensaverui.ui:41 #, no-c-format msgid "Set some setting" msgstr "设置一些选项" #: languages/cpp/ccconfigwidgetbase.ui:16 #, no-c-format msgid "C++ Options" msgstr "C++ 选项" #: languages/cpp/ccconfigwidgetbase.ui:31 #, no-c-format msgid "&Code Completion" msgstr "代码补全(&C)" #: languages/cpp/ccconfigwidgetbase.ui:50 #, no-c-format msgid "Code Completion Options" msgstr "代码补全选项" #: languages/cpp/ccconfigwidgetbase.ui:69 #, no-c-format msgid "A&utomatic code completion:" msgstr "自动代码补全(&U):" #: languages/cpp/ccconfigwidgetbase.ui:75 #, no-c-format msgid "Offer options to complete what you are typing." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:116 #, no-c-format msgid "How long after a key press to offer suggestions" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:132 #: languages/cpp/ccconfigwidgetbase.ui:279 #: languages/cpp/configproblemreporter.ui:92 #: languages/java/configproblemreporter.ui:62 #, no-c-format msgid "msec" msgstr "毫秒" #: languages/cpp/ccconfigwidgetbase.ui:142 #, fuzzy, no-c-format msgid "" "List &global items when\n" "performing automatic completion" msgstr "代码自动补全时显示全局对象成员列表(&G)" #: languages/cpp/ccconfigwidgetbase.ui:146 #: languages/cpp/ccconfigwidgetbase.ui:155 #, no-c-format msgid "" "When this is checked, members of all \n" "higher namespaces will be included in \n" "the completion-list while performing \n" "automatic completion. \n" "\n" "This may bloat the completion-list \n" "and create a significant delay." msgstr "" "选中此项,当执行代码自动补全时\n" "所有较高(全局)名称空间的成员将\n" "包含在补全列表中\n" "\n" "这导致补全列表变得臃肿并造成延时" #: languages/cpp/ccconfigwidgetbase.ui:169 #, fuzzy, no-c-format msgid "&Do complete member-type-evaluation" msgstr "计算完整的布尔值" #: languages/cpp/ccconfigwidgetbase.ui:172 #: languages/cpp/ccconfigwidgetbase.ui:179 #, no-c-format msgid "" "Completely evaluate member-types of \n" "template-classes (this includes types \n" "of member-variables and return-types \n" "of member-functions) in the \n" "completion-box." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:191 #, fuzzy, no-c-format msgid "Do complete argument-type-e&valuation" msgstr "计算完整的布尔值" #: languages/cpp/ccconfigwidgetbase.ui:194 #: languages/cpp/ccconfigwidgetbase.ui:199 #, no-c-format msgid "" "Completely evaluate the function-argument-types \n" "of template-class member-functions in the \n" "completion-box." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:211 #, no-c-format msgid "Argument Hint Options" msgstr "参数提示选项" #: languages/cpp/ccconfigwidgetbase.ui:222 #, no-c-format msgid "Auto&matic arguments hint:" msgstr "自动提示参数(&M):" #: languages/cpp/ccconfigwidgetbase.ui:289 #, fuzzy, no-c-format msgid "" "Show comment with\n" "argument hint" msgstr "显示提示参数的注释" #: languages/cpp/ccconfigwidgetbase.ui:313 #, no-c-format msgid "Incremental Parsing" msgstr "代码分析附加选项" #: languages/cpp/ccconfigwidgetbase.ui:324 #, no-c-format msgid "Do not process included headers" msgstr "不处理包含的的头文件" #: languages/cpp/ccconfigwidgetbase.ui:335 #, no-c-format msgid "" "Preprocess and parse included \n" "headers into a database(experimental)" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:339 #, no-c-format msgid "" "Parse preprocessed headers that are not part of this project \n" "into a special completion-database. To reparse the headers delete\n" "the database and reopen the project." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:349 #, no-c-format msgid "" "Preprocess included headers\n" "(collect macros and visibility-information)" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:353 #, no-c-format msgid "" "Try to locate all included files and preprocess them. \n" "This makes macros and imported namespaces work correctly, and allows " "TDevelop\n" "to know what code-items are visible from within which file.\n" "Note: Parsing may become very slow when this is enabled\n" "(It will become faster after some time)." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:367 #, no-c-format msgid "Code Completion Databases" msgstr "代码补全数据库" #: languages/cpp/ccconfigwidgetbase.ui:370 #, no-c-format msgid "" "Code Completion Databases are used to store the parsed headers for " "external libraries, to allow code completion for non-project classes and " "methods." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:431 #, no-c-format msgid "Click to start the Code Completion database creation wizard." msgstr "单击可访问代码补全数据库创建向导。" #: languages/cpp/ccconfigwidgetbase.ui:470 #, no-c-format msgid "Misc" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:489 #, no-c-format msgid "Advanced include-path resolution using make(e&xperimental)" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:492 #, no-c-format msgid "" "Try to resolve the include-path by getting the command that would be used \n" "for compiling the file and parsing the gcc-options. The build-system needs " "to be working, \n" "test for problems by running \"make -n -W myfile.cpp myfile.o\" in the " "directory. \n" "This also works with cmake, and maybe some other build-systems that build on " "make. \n" "The project needs to be compiled or at least configured before this system " "may work." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:504 #, fuzzy, no-c-format msgid "Show t&ype evaluation in status bar" msgstr "在标签栏上显示关闭按钮" #: languages/cpp/ccconfigwidgetbase.ui:512 #, fuzzy, no-c-format msgid "src;" msgstr "结构" #: languages/cpp/ccconfigwidgetbase.ui:515 #, no-c-format msgid "" "A semicolon-separated list of include-paths to be used while searching for " "headers. \n" "Paths not starting with '/' will be interpreted as relative to the project-" "folder." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:524 #, no-c-format msgid "std=_GLIBCXX_STD" msgstr "std=_GLIBCXX_STD" #: languages/cpp/ccconfigwidgetbase.ui:527 #, no-c-format msgid "" "This line may contain a semicolon-separated list of namespace-aliases and " "namespace-imports. \n" "example: \"std<<_GLIBCXX_STD;NewNamespaceName=OldNamespaceName; << " "SomeGloballyImportedNamespace\" (without paratheses). \n" "\"<<\" means that the right namespace is imported into the left, while \"=\" " "means that both namespaces are treated as\n" "if they were one(\"a=b\" is equivalent to \"a<Switch Header/Implementation \n" "feature attempt to match the function under the \n" "cursor with the matching declaration/definition.\n" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:740 #, fuzzy, no-c-format msgid "Show Go To &Declaration/Definition submenus" msgstr "显示转到定义/定义子菜单" #: languages/cpp/ccconfigwidgetbase.ui:743 #: languages/cpp/ccconfigwidgetbase.ui:750 #, no-c-format msgid "" "Check to show two additional submenus \n" "in the editor context menu containing \n" "all the declarations and definitions \n" "for the current file and its matching \n" "header/implementation file." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:762 #, fuzzy, no-c-format msgid "Show type evaluation &based navigation menus" msgstr "显示转到定义/定义子菜单" #: languages/cpp/ccconfigwidgetbase.ui:765 #: languages/cpp/ccconfigwidgetbase.ui:770 #, no-c-format msgid "" "Menus appear on the right mouse click context menu, \n" "hows menu items to navigate. Needs the \"Class View\"\n" "plugin enabled to have use all options." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:784 #, no-c-format msgid "Class Wi&zard" msgstr "类向导(&Z)" #: languages/cpp/ccconfigwidgetbase.ui:803 #, fuzzy, no-c-format msgid "Filename options" msgstr "过滤选项" #: languages/cpp/ccconfigwidgetbase.ui:806 #, no-c-format msgid "" "These are the suffixes used by the Class Wizard when creating new classes." "
    Should be in the format: \".suffix\"" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:827 #, no-c-format msgid "&Interface suffix:" msgstr "接口后缀(&I):" #: languages/cpp/ccconfigwidgetbase.ui:838 #, no-c-format msgid "I&mplementation suffix:" msgstr "实现后缀(&M):" #: languages/cpp/ccconfigwidgetbase.ui:870 #, no-c-format msgid "&Qt Options" msgstr "Qt 选项(&Q)" #: languages/cpp/ccconfigwidgetbase.ui:881 #, no-c-format msgid "Enable Qt opt&ions" msgstr "启用 Qt 选项(&I)" #: languages/cpp/ccconfigwidgetbase.ui:892 #, no-c-format msgid "Qt Version, Directory and QMake Binary" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:898 #, no-c-format msgid "" "Select which Qt version your project is using and where that Qt version is " "installed to.\n" "\n" "This option only applies to QMake projects." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:919 #, no-c-format msgid "Qt 3" msgstr "Qt 3.x" #: languages/cpp/ccconfigwidgetbase.ui:925 #, no-c-format msgid "" "Use Qt version 3 (When this is changed the project needs to be closed and re-" "opened.)" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:928 #, no-c-format msgid "" "Select this if your project is using Qt version 3.x.
    When this is changed " "the project needs to be closed and re-opened." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:936 #, no-c-format msgid "Qt 4" msgstr "Qt 4.x" #: languages/cpp/ccconfigwidgetbase.ui:939 #, no-c-format msgid "" "Use Qt version 4 (When this is changed the project needs to be closed and re-" "opened.)" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:942 #, no-c-format msgid "" "Select this if your project is using Qt version 4.x.
    When this is changed " "the project needs to be closed and re-opened." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:950 #, no-c-format msgid "(After changing the project needs to be re-opened)" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:988 #, no-c-format msgid "Qt3 Directory:" msgstr "Qt3 目录:" #: languages/cpp/ccconfigwidgetbase.ui:991 #, no-c-format msgid "" "This setting is only needed for Qt3 programs, for Qt4 just make sure the " "QMake Binary is set properly" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:999 #, no-c-format msgid "" "The Qt directory, will be red if it is not a valid Qt directory. This " "setting is only needed for Qt3 programs." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1002 #, no-c-format msgid "" "Choose the directory that Qt was installed to. If this is shown in red the " "directory is not a valid Qt directory." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1020 #, fuzzy, no-c-format msgid "QMake Binary:" msgstr "QMake 管理器" #: languages/cpp/ccconfigwidgetbase.ui:1028 #, no-c-format msgid "The full path to the QMake executable to be used" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1043 #, fuzzy, no-c-format msgid "Qt include syntax" msgstr "扩展语法" #: languages/cpp/ccconfigwidgetbase.ui:1049 #, fuzzy, no-c-format msgid "Select which include style your project is using." msgstr "选择您的工程所使用的 Qt 版本。" #: languages/cpp/ccconfigwidgetbase.ui:1060 #, no-c-format msgid "Qt &3 style (#include )" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1063 #, fuzzy, no-c-format msgid "Alt+3" msgstr "Alt+1" #: languages/cpp/ccconfigwidgetbase.ui:1069 #, fuzzy, no-c-format msgid "" "Select this if your project is using include style as known from Qt version " "3.x." msgstr "如果您的工程正使用 Qt 3.x,请选择此项。" #: languages/cpp/ccconfigwidgetbase.ui:1077 #, no-c-format msgid "Qt &4 style (#include )" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1080 #, fuzzy, no-c-format msgid "Alt+4" msgstr "Alt+1" #: languages/cpp/ccconfigwidgetbase.ui:1083 #, fuzzy, no-c-format msgid "" "Select this if your project is using include style as known from Qt version " "4.x." msgstr "如果您的工程正使用 Qt 4.x,请选择此项。" #: languages/cpp/ccconfigwidgetbase.ui:1096 #, fuzzy, no-c-format msgid "UI Designer Integration" msgstr "

    UI 设计师集成

    " #: languages/cpp/ccconfigwidgetbase.ui:1113 src/settingswidget.ui:396 #, fuzzy, no-c-format msgid "&Use TDevelop's embedded designer" msgstr "使用嵌入的 KDevelop 设计师(&U)" #: languages/cpp/ccconfigwidgetbase.ui:1116 #, fuzzy, no-c-format msgid "Start TDevelop's own designer embedded within TDevelop" msgstr "在 KDevelop 中启动 KDevelop 自带的设计师" #: languages/cpp/ccconfigwidgetbase.ui:1119 src/settingswidget.ui:402 #, no-c-format msgid "" "TDevelop comes with its own UI designer that can either be embedded or be " "run as a separate program. Check this button if you wish to integrate the UI " "designer into TDevelop." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1127 #, fuzzy, no-c-format msgid "Run &TDevelop's designer as a separate application" msgstr "将 KDevelop 的设计器运行为单独的应用程序(&D)" #: languages/cpp/ccconfigwidgetbase.ui:1130 #, fuzzy, no-c-format msgid "Start TDevelop's own designer externally" msgstr "在外部启动 KDevelop 自带的设计师" #: languages/cpp/ccconfigwidgetbase.ui:1133 src/settingswidget.ui:416 #, no-c-format msgid "" "TDevelop comes with its own UI designer that can either be embedded or be " "run as a separate program. Check this button if you wish to run TDevelop's " "UI designer as a separate program." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1141 #, fuzzy, no-c-format msgid "Run Qt &Designer" msgstr "运行 Qt 设计师(&G)" #: languages/cpp/ccconfigwidgetbase.ui:1144 src/settingswidget.ui:427 #, no-c-format msgid "Use Qt Designer externally" msgstr "使用外部的 Qt 设计师" #: languages/cpp/ccconfigwidgetbase.ui:1147 src/settingswidget.ui:430 #, no-c-format msgid "" "Check this button if you wish to use Qt Designer rather than TDevelop's " "integrated designer." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1163 #, fuzzy, no-c-format msgid "Designer Binary:" msgstr "KDevDesignerPart" #: languages/cpp/ccconfigwidgetbase.ui:1174 #, no-c-format msgid "The full path to the Designer executable to be used" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1192 #, no-c-format msgid "Extra Plugin Paths for Qt4 Designer:" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1203 #, no-c-format msgid "Change Plugin Paths" msgstr "改变 Plugin 路径" #: languages/cpp/ccconfigwidgetbase.ui:1234 #, fuzzy, no-c-format msgid "&Accessors" msgstr "访问(&S):" #: languages/cpp/ccconfigwidgetbase.ui:1245 #, no-c-format msgid "E&xample for Member Variable of Type String" msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1264 #, no-c-format msgid "Variable name:" msgstr "变量名:" #: languages/cpp/ccconfigwidgetbase.ui:1272 #, no-c-format msgid "m_x" msgstr "m_x" #: languages/cpp/ccconfigwidgetbase.ui:1299 #, no-c-format msgid "int x() const;" msgstr "int x() const;" #: languages/cpp/ccconfigwidgetbase.ui:1310 #, no-c-format msgid "void setX(const string& theValue);" msgstr "void setX(const string& theValue);" #: languages/cpp/ccconfigwidgetbase.ui:1321 #, no-c-format msgid "Get method:" msgstr "Get 方法:" #: languages/cpp/ccconfigwidgetbase.ui:1329 #, no-c-format msgid "Set method:" msgstr "Set 方法:" #: languages/cpp/ccconfigwidgetbase.ui:1342 #: languages/cpp/ccconfigwidgetbase.ui:1347 #: languages/cpp/ccconfigwidgetbase.ui:1360 #: languages/cpp/ccconfigwidgetbase.ui:1365 #: languages/cpp/ccconfigwidgetbase.ui:1386 #: languages/cpp/ccconfigwidgetbase.ui:1391 #, no-c-format msgid "" "Will show as \"Create Accessor Methods\" in the\n" "right mouse button context menu only when \n" "you right click on a variable in a header file." msgstr "" #: languages/cpp/ccconfigwidgetbase.ui:1375 #, no-c-format msgid "Prefix for get methods:" msgstr "get 方法的前缀:" #: languages/cpp/ccconfigwidgetbase.ui:1401 #, no-c-format msgid "Prefix for set methods:" msgstr "set 方法的前缀:" #: languages/cpp/ccconfigwidgetbase.ui:1409 #, no-c-format msgid "m_" msgstr "m_" #: languages/cpp/ccconfigwidgetbase.ui:1417 #, no-c-format msgid "Member variable prefix to remove:" msgstr "要删除的成员变量前缀:" #: languages/cpp/ccconfigwidgetbase.ui:1425 #, no-c-format msgid "theValue" msgstr "theValue" #: languages/cpp/ccconfigwidgetbase.ui:1450 #, no-c-format msgid "Parametername in set method:" msgstr "set 方法中的 Parametername:" #: languages/cpp/classgeneratorconfigbase.ui:27 #, no-c-format msgid "Class &Templates" msgstr "类模板(&T)" #: languages/cpp/classgeneratorconfigbase.ui:36 #, no-c-format msgid "Cpp Header" msgstr "Cpp 头文件" #: languages/cpp/classgeneratorconfigbase.ui:41 #, no-c-format msgid "Cpp Source" msgstr "Cpp 源文件" #: languages/cpp/classgeneratorconfigbase.ui:46 #, no-c-format msgid "Objective-C Header" msgstr "Objective-C 头文件" #: languages/cpp/classgeneratorconfigbase.ui:51 #, no-c-format msgid "Objective-C Source" msgstr "Objective-C 源文件" #: languages/cpp/classgeneratorconfigbase.ui:56 #, no-c-format msgid "GTK C Header" msgstr "GTK C 头文件" #: languages/cpp/classgeneratorconfigbase.ui:61 #, no-c-format msgid "GTK C Source" msgstr "GTK C 源文件" #: languages/cpp/classgeneratorconfigbase.ui:88 #, no-c-format msgid "Names" msgstr "名称" #: languages/cpp/classgeneratorconfigbase.ui:99 #, no-c-format msgid "#ifndef - #&define names:" msgstr "#ifndef - #&define names:" #: languages/cpp/classgeneratorconfigbase.ui:110 #, no-c-format msgid "&File names:" msgstr "文件名(&F):" #: languages/cpp/classgeneratorconfigbase.ui:119 #: languages/cpp/classgeneratorconfigbase.ui:139 #: languages/cpp/classgeneratorconfigbase.ui:167 #, no-c-format msgid "Lowercase" msgstr "小写" #: languages/cpp/classgeneratorconfigbase.ui:124 #: languages/cpp/classgeneratorconfigbase.ui:144 #: languages/cpp/classgeneratorconfigbase.ui:172 #, no-c-format msgid "Uppercase" msgstr "大写" #: languages/cpp/classgeneratorconfigbase.ui:129 #: languages/cpp/classgeneratorconfigbase.ui:149 #: languages/cpp/classgeneratorconfigbase.ui:177 #, no-c-format msgid "Same as Class Names" msgstr "和类名相同" #: languages/cpp/classgeneratorconfigbase.ui:154 #, no-c-format msgid "Same as File Names" msgstr "和文件名相同" #: languages/cpp/classgeneratorconfigbase.ui:189 #, no-c-format msgid "&Superclass file names:" msgstr "超类文件名(&S):" #: languages/cpp/classgeneratorconfigbase.ui:202 #, no-c-format msgid "Class Documentation" msgstr "类文档" #: languages/cpp/classgeneratorconfigbase.ui:213 #, no-c-format msgid "Include &author name in class documentation" msgstr "在类文档中包含作者姓名(&A)" #: languages/cpp/classgeneratorconfigbase.ui:221 #, no-c-format msgid "Generate &empty documentation strings" msgstr "生成空的文档字串(&E)" #: languages/cpp/classgeneratorconfigbase.ui:231 #, no-c-format msgid "&Reformat source before creating files" msgstr "生成文件之前重新排版源代码(&R)" #: languages/cpp/configproblemreporter.ui:27 #, no-c-format msgid "" "If enabled, the C++ parser will report any syntax errors it detects. \n" "They will be displayed in the 'Problems' output view and as markers in the " "editor." msgstr "" #: languages/cpp/configproblemreporter.ui:39 #, fuzzy, no-c-format msgid "&Use Problem Reporter" msgstr "问题报告者" #: languages/cpp/configproblemreporter.ui:52 #, no-c-format msgid "Parsing" msgstr "分析" #: languages/cpp/configproblemreporter.ui:55 #, no-c-format msgid "" "If enabled, the C++ parser will run on the active file after the stated " "timeout, after there has been any changes to the text.\n" "\n" "If disabled, the parser will typically only run when the file is saved." msgstr "" #: languages/cpp/configproblemreporter.ui:76 #, fuzzy, no-c-format msgid "Enable &background parsing" msgstr "启用后台分析(&E)" #: languages/cpp/configproblemreporter.ui:133 #, no-c-format msgid "Special &Headers" msgstr "特殊头文件(&H)" #: languages/cpp/configproblemreporter.ui:136 #, no-c-format msgid "" "Often a macro that the C++ parser must understand in order to correctly " "parse a piece of code is defined somewhere in a non-standard header file " "that the parser does not look at. This textbox can be used to define those " "macros locally so that the C++ parser can understand them." msgstr "" #: languages/cpp/cppnewclassdlgbase.ui:16 #: languages/php/phpnewclassdlgbase.ui:16 #, no-c-format msgid "New Class" msgstr "新建类" #: languages/cpp/cppnewclassdlgbase.ui:34 #, no-c-format msgid "Class &Information" msgstr "类信息(&I)" #: languages/cpp/cppnewclassdlgbase.ui:73 #, no-c-format msgid "Docu&mentation:" msgstr "文档(&M):" #: languages/cpp/cppnewclassdlgbase.ui:84 #, no-c-format msgid "" "Insert a short description for your new class\n" "here for documentation purposes. This can be used\n" "to create API documentation in HTML format with\n" "doxygen or similar tools." msgstr "" "为建立文档考虑,请在这里为您的新类插入一段\n" "简短的说明,以后可以用 doxygen 或其它类似工具\n" "建立 HTML 格式的 API 文档。" #: languages/cpp/cppnewclassdlgbase.ui:97 #, no-c-format msgid "File Names" msgstr "文件名" #: languages/cpp/cppnewclassdlgbase.ui:108 #, no-c-format msgid "&Header:" msgstr "头文件(&H):" #: languages/cpp/cppnewclassdlgbase.ui:119 #, no-c-format msgid "" "Insert your header file name here.\n" "It is automatically inserted while\n" "you select the classname, but you can\n" "still edit it afterwards." msgstr "" "在这儿输入您的头文件名。\n" "在您选择类名时,它会自动\n" "被插入,但以后您仍然可以\n" "编辑它。" #: languages/cpp/cppnewclassdlgbase.ui:130 #, no-c-format msgid "Im&plementation:" msgstr "实现(&P):" #: languages/cpp/cppnewclassdlgbase.ui:141 #, no-c-format msgid "" "Insert your implementation filename here.\n" "It is automatically inserted while\n" "you select the classname, but you can\n" "still edit it afterwards." msgstr "" "在此插入您的实现文件名。\n" "在您选择类名时,它会自动\n" "被插入,但以后您仍然可以\n" "编辑它。" #: languages/cpp/cppnewclassdlgbase.ui:152 #, fuzzy, no-c-format msgid "Create only header" msgstr "创建元素" #: languages/cpp/cppnewclassdlgbase.ui:192 #, no-c-format msgid "" "Insert your new classname here.\n" "You can also define template classes by specifying\n" "template classname" msgstr "" "在这里插入您的新类名。\n" "您也可以使用template <参数> 类名\n" "来定义模板类。" #: languages/cpp/cppnewclassdlgbase.ui:210 #, no-c-format msgid "Name&space:" msgstr "命名空间(&S):" #: languages/cpp/cppnewclassdlgbase.ui:221 #, no-c-format msgid "" "Insert a name of the namespace here.\n" "You can define nested namespaces by specifying\n" "Namespace1::Namespace2::...::NamespaceN" msgstr "" "在这里插入命名空间的名字。\n" "您可以使用Namespace1::Namespace2::...::NamespaceN\n" "来定义嵌套的命名空间。" #: languages/cpp/cppnewclassdlgbase.ui:233 #, no-c-format msgid "Inheritance" msgstr "继承" #: languages/cpp/cppnewclassdlgbase.ui:349 #: languages/php/phpnewclassdlgbase.ui:84 #, no-c-format msgid "&Base class:" msgstr "基类(&B):" #: languages/cpp/cppnewclassdlgbase.ui:358 #, no-c-format msgid "Baseclass Name" msgstr "基类名称" #: languages/cpp/cppnewclassdlgbase.ui:369 #, no-c-format msgid "Inheritance Type" msgstr "继承类型" #: languages/cpp/cppnewclassdlgbase.ui:416 #, no-c-format msgid "" "Insert the base class which your new class will be derived from. If you have " "checked 'Generate QWidget child class' the new class will be derived from " "QWidget. If no base class is named, the new class will not have a parent " "class. You can also use template classes here (like BaseClass)" msgstr "" "指明您的新类要从那一个基类派生。如果您选择了“生成 QWidget 的子类”,新类就从 " "QWidge t派生。如果没有指定基类,则新类就没有父类。在此您也可以使用模板类(比" "如 BaseClass)。" #: languages/cpp/cppnewclassdlgbase.ui:489 #, no-c-format msgid "Virtual" msgstr "虚" #: languages/cpp/cppnewclassdlgbase.ui:500 #, no-c-format msgid "Public" msgstr "公有" #: languages/cpp/cppnewclassdlgbase.ui:514 #, no-c-format msgid "Protected" msgstr "保护" #: languages/cpp/cppnewclassdlgbase.ui:525 #, no-c-format msgid "Private" msgstr "私有" #: languages/cpp/cppnewclassdlgbase.ui:548 #, no-c-format msgid "Use file t&emplates" msgstr "使用文件模板(&E)" #: languages/cpp/cppnewclassdlgbase.ui:559 #, no-c-format msgid "Generate QOb&ject child class" msgstr "生成 QObject 的子类(&J)" #: languages/cpp/cppnewclassdlgbase.ui:567 #, no-c-format msgid "Generate Q&Widget child class" msgstr "生成 QWidget 的子类(&W)" #: languages/cpp/cppnewclassdlgbase.ui:575 #, no-c-format msgid "Generate G&TK+ class" msgstr "生成 GTK+ 类(&T)" #: languages/cpp/cppnewclassdlgbase.ui:583 #, no-c-format msgid "Use Objective-C" msgstr "使用面向对象的 Objective-C" #: languages/cpp/cppnewclassdlgbase.ui:595 #, no-c-format msgid "Ad&vanced Information" msgstr "高级信息(&V)" #: languages/cpp/cppnewclassdlgbase.ui:610 #, no-c-format msgid "Constr&uctors" msgstr "构造函数(&U)" #: languages/cpp/cppnewclassdlgbase.ui:619 #, no-c-format msgid "Base Class Constructors" msgstr "基类构造函数" #: languages/cpp/cppnewclassdlgbase.ui:668 #, no-c-format msgid "C&reate Constructor >>" msgstr "创建构造函数(&R) >>" #: languages/cpp/cppnewclassdlgbase.ui:690 #, no-c-format msgid "C&lear Selection" msgstr "清除选择(&L)" #: languages/cpp/cppnewclassdlgbase.ui:721 #, no-c-format msgid "&Header" msgstr "头文件(&H)" #: languages/cpp/cppnewclassdlgbase.ui:756 #, no-c-format msgid "&Source" msgstr "源文件(&S)" #: languages/cpp/cppnewclassdlgbase.ui:794 #, no-c-format msgid "Methods Ov&erriding" msgstr "方法重载(&E)" #: languages/cpp/cppnewclassdlgbase.ui:814 #, no-c-format msgid "Extend Functionality" msgstr "扩展功能" #: languages/cpp/cppnewclassdlgbase.ui:849 #, no-c-format msgid "&Access Control" msgstr "访问控制(&A)" #: languages/cpp/cppnewclassdlgbase.ui:858 #, no-c-format msgid "Methods & Attributes" msgstr "方法和属性" #: languages/cpp/cppnewclassdlgbase.ui:869 #, no-c-format msgid "Implied Modifier" msgstr "隐式修饰符" #: languages/cpp/cppnewclassdlgbase.ui:880 #, no-c-format msgid "New Modifier" msgstr "新建修饰符" #: languages/cpp/cppnewclassdlgbase.ui:923 #, no-c-format msgid "&Generation Options" msgstr "代码生成选项(&G)" #: languages/cpp/creategettersetter.ui:44 #, no-c-format msgid "&inline" msgstr "内联(&I)" #: languages/cpp/creategettersetter.ui:50 #, no-c-format msgid "create an inline get method" msgstr "创建内联 get 方法" #: languages/cpp/creategettersetter.ui:53 #, no-c-format msgid "" "If this is checked the get method will be created inline; otherwise, it will " "not." msgstr "" #: languages/cpp/creategettersetter.ui:61 #, no-c-format msgid "&get method" msgstr "get 方法(&G)" #: languages/cpp/creategettersetter.ui:67 #, no-c-format msgid "create get method" msgstr "创建 get 方法" #: languages/cpp/creategettersetter.ui:70 #, no-c-format msgid "If this is checked a getter method will be created." msgstr "" #: languages/cpp/creategettersetter.ui:78 #, no-c-format msgid "&set method" msgstr "set 方法(&S)" #: languages/cpp/creategettersetter.ui:84 #, no-c-format msgid "create set method" msgstr "创建 set 方法" #: languages/cpp/creategettersetter.ui:87 #, no-c-format msgid "If this is checked a set method will be created" msgstr "" #: languages/cpp/creategettersetter.ui:95 #, no-c-format msgid "name of the get method" msgstr "get 方法的名称" #: languages/cpp/creategettersetter.ui:98 #, no-c-format msgid "The name of the created get method" msgstr "所创建的 get 方法的名称" #: languages/cpp/creategettersetter.ui:106 #, no-c-format msgid "name of the set method" msgstr "set 方法的名称" #: languages/cpp/creategettersetter.ui:109 #, no-c-format msgid "The name of the created set method" msgstr "所创建的 set 方法的名称" #: languages/cpp/creategettersetter.ui:117 #, no-c-format msgid "i&nline" msgstr "内联(&N)" #: languages/cpp/creategettersetter.ui:123 #, no-c-format msgid "create an inline set method" msgstr "创建内联的 set 方法" #: languages/cpp/creategettersetter.ui:126 #, no-c-format msgid "" "If this is checked the set method will be created inline; otherwise, it will " "not." msgstr "" #: languages/cpp/createpcsdialogbase.ui:16 #, no-c-format msgid "New Persistant Class Store" msgstr "新建持久类存储" #: languages/cpp/createpcsdialogbase.ui:23 #, fuzzy, no-c-format msgid "Select importer" msgstr "选择目录" #: languages/cpp/createpcsdialogbase.ui:55 #, fuzzy, no-c-format msgid "Select directory" msgstr "选择目录" #: languages/cpp/createpcsdialogbase.ui:63 #, fuzzy, no-c-format msgid "Describe database contents" msgstr "可写的类型常量" #: languages/cpp/createpcsdialogbase.ui:74 #, fuzzy, no-c-format msgid "Filename:" msgstr "文件名:" #: languages/cpp/createpcsdialogbase.ui:106 #, no-c-format msgid "Creating..." msgstr "正在创建..." #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:16 #, no-c-format msgid "Debugger Configuration" msgstr "调试器配置" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:33 #, no-c-format msgid "" "Debug arguments can be set on the Run Options page\n" " or directly in the project manager" msgstr "" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:50 #, no-c-format msgid "Debugger executable:" msgstr "调试器程序:" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:61 #, fuzzy, no-c-format msgid "Gdb executable" msgstr "htdig 可执行文件(&G):" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:64 #, no-c-format msgid "" "To run \"gdb\" binary from $PATH, leave this field empty. To run custom gdb, " "for example, for a different architecture, enter the executable name here. " "You can either run gdb from $PATH, but with a different name (say, \"arm-gdb" "\"), by typing the name here, or specify full path to the gdb executable." msgstr "" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:80 #, no-c-format msgid "Debugging &shell:" msgstr "调试器外壳(&S):" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:86 #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:97 #, fuzzy, no-c-format msgid "Run gdb in a special shell (mainly for automake projects)" msgstr "在特殊的 shell 中运行 gdb" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:89 #, no-c-format msgid "" "If you want gdb to be executed by a special shell or tool insert it here. " "The main use-case is for Automake based projects where the application is " "actually only a script and libtool is needed to get it to run inside gdb." msgstr "" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:100 #, no-c-format msgid "" "If you want gdb to be executed by a special shell or tool insert it here. " "The main use-case is for Automake based projects where the application is " "actually only a script and libtool is needed to get it to run inside " "gdb." msgstr "" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:127 #, no-c-format msgid "Display &demangled names" msgstr "显示解码后的方法名(&D)" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:130 #, no-c-format msgid "" "When displaying the disassembled code you\n" "can select to see the methods' mangled names.\n" "However, non-mangled names are easier to read." msgstr "" "当显示反汇编代码时,您可以选择显示编码后的方法名。\n" "然而未编码的方法名要容易阅读得多。" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:140 #, no-c-format msgid "Try settings &breakpoints on library loading" msgstr "尝试当载入库的时候设置断点(&B)" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:143 #, fuzzy, no-c-format msgid "" "If GDB has not seen a library that will be loaded via\n" "\"dlopen\" then it will refuse to set a breakpoint in that code.\n" "We can get GDB to stop on a library load and hence\n" "try to set the pending breakpoints. See the documentation\n" "for more details relating to this behavior.\n" "\n" "If you are not \"dlopen\"ing libs then leave this unchecked." msgstr "" "当一个库通过“dlopen”加载的时候,如果 GDB 没\n" "有用到过它,那么它将拒绝在那里的代码中设置断点。\n" "我们可以在载入库的时候让 GDB 停下来,这样我们\n" "就可以尝试设置待定断点。请在相关文档中查看与这\n" "种行为相关的更多细节。\n" "\n" "如果您不是用“dlopen”加载库,请不要选择这项。" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:157 #, no-c-format msgid "Enable separate terminal for application &IO" msgstr "为应用程序输入输出启用单独的终端(&I)" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:160 #, fuzzy, no-c-format msgid "Alt+I" msgstr "Alt+1" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:163 #, no-c-format msgid "" "This allows you to enter terminal input when your\n" "application contains terminal input code (e.g. cin, fgets, etc.).\n" "If you use terminal input in your application then check this option.\n" "Otherwise leave it unchecked." msgstr "" "如果您的应用程序含有终端输入代码(比如 cin、fgets 等等)\n" "这让您可以在终端里进行输入。如果您在程序里用到终端输入\n" "请选中此选项,反之请不要选中它。" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:174 #, no-c-format msgid "E&nable floating toolbar" msgstr "启用浮动工具栏(&N)" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:177 #: src/settingswidget.ui:443 #, fuzzy, no-c-format msgid "Alt+N" msgstr "Alt+1" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:180 #, fuzzy, no-c-format msgid "" "Use the floating toolbar. This toolbar always stays\n" "on top of all windows so that if the app covers TDevelop\n" "you have control of the app through the small toolbar. It\n" "can also be docked into the panel.\n" "\n" "This toolbar is in addition to the toolbar in TDevelop." msgstr "" "使用可以浮动的工具栏。这种工具栏通常呆在\n" "所有的窗口的顶部,因此如果一个应用程序覆盖\n" "了 KDevelop,您可以通过这个小工具栏来控制\n" "应用程序,这个工具栏也可以停靠在面板上。\n" "\n" "这个工具栏是 KDevelop 工具栏之外的一个补充。" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:193 #, no-c-format msgid "Display static &members" msgstr "显示静态成员(&M)" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:196 #, fuzzy, no-c-format msgid "Alt+M" msgstr "Alt+1" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:199 #, fuzzy, no-c-format msgid "" "Displaying static members makes GDB slower in\n" "producing data within TDE and TQt.\n" "It may change the \"signature\" of the data\n" "which TQString and friends rely on,\n" "but if you need to debug into these values then\n" "check this option." msgstr "" "显示静态成员将会使 gdb 在 TDE\n" "和 Qt 中生成数据的速度变慢。\n" "它可能改变那些 QString 和友元\n" "函数所依赖的数据的“签名”。\n" "但是如果您需要调试这些变量的话,\n" "请选中这个选项。" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:222 #, no-c-format msgid "Global Output Radix" msgstr "全局输出数制" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:233 #, no-c-format msgid "Oct&al" msgstr "八进制(&A)" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:241 #, no-c-format msgid "He&xadecimal" msgstr "十六进制(&X)" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:259 #, fuzzy, no-c-format msgid "Start Debugger With" msgstr "在调试器中运行" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:270 #, fuzzy, no-c-format msgid "Framestack" msgstr "堆栈框架" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:292 #, no-c-format msgid "Remote Debugging" msgstr "远程调试" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:295 #, no-c-format msgid "" "This script is intended for the actual commands needed to connect to a " "remotely running executable.\n" "\tshell sleep 5\twait for remote program to start\n" "\ttarget remote ...\tconnect to the remote debugger\n" "\tcontinue\t[optional] run debugging to the first breakpoint." msgstr "" "这个脚本是连接到远程运行的执行程序所需要的实际命令。\n" "\tshell sleep 5\t等待远程程序启动\n" "\ttarget remote ...\t连接到远程调试器\n" "\tcontinue\t[optional] 调试运行到第一个断点。" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:317 #, no-c-format msgid "R&un shell script:" msgstr "运行 shell 脚本(&U):" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:332 #, no-c-format msgid "Script to connect with remote application" msgstr "连接远程应用程序的脚本" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:335 #, fuzzy, no-c-format msgid "" "This script is sourced by gdb after the two preceding scripts have been " "executed.\n" "This script is intended for the actual commands needed to connect to a " "remotely running executable.\n" "\tshell sleep 5\twait for remote program to start\n" "\ttarget remote ...\tconnect to the remote debugger\n" "\tcontinue\t[optional] run debugging to the first breakpoint." msgstr "" "这个脚本是连接到远程运行的执行程序所需要的实际命令。\n" "\tshell sleep 5\t等待远程程序启动\n" "\ttarget remote ...\t连接到远程调试器\n" "\tcontinue\t[optional] 调试运行到第一个断点。" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:347 #, no-c-format msgid "Script to start remote application" msgstr "启动远程应用程序的脚本" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:350 #, fuzzy, no-c-format msgid "" "This shell script is run after the Config gdb script has been sourced by " "gdb.\n" "When debugging remotely this script is intended to actually start the remote " "process.\n" "[It is expected that the debug executable can be reached on the target, " "maybe by downloading it as a final build step]\n" "1) Find a way to execute a command remotely - rsh, ssh, telnet, ...\n" "2a) Execute \"gdbserver ... application\" on target.\n" "or if your executable contains the gdb stub\n" "2b) Execute \"application\" on target." msgstr "" "这个脚本用于远程调试时启动远程进程。\n" "[这个脚本希望可以连接调试的进程,或者在编译的最后可以下载到本地。]\n" "1)选择执行远程命令的方式-rsh,ssh,telnet,...\n" "2a)在目标平台上运行\"gdbserver ... 应用程序\"。\n" "或者您的应用程序中已经包含gdb启动程序\n" "2b)在目标平台上运行\"应用程序\"。" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:364 #, no-c-format msgid "Run &gdb script:" msgstr "运行 gdb 脚本(&G):" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:376 #, no-c-format msgid "&Config gdb script:" msgstr "配置 gdb 脚本(&C):" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:387 #, no-c-format msgid "Gdb configure script" msgstr "Gdb 配置脚本" #: languages/cpp/debugger/debuggerconfigwidgetbase.ui:390 #, no-c-format msgid "This script is sourced by gdb when the debugging starts." msgstr "" #: languages/cpp/debugger/debuggertracingdialogbase.ui:16 #, no-c-format msgid "Tracing Configuration" msgstr "跟踪配置" #: languages/cpp/debugger/debuggertracingdialogbase.ui:27 #, no-c-format msgid "Enable tracing" msgstr "启用跟踪" #: languages/cpp/debugger/debuggertracingdialogbase.ui:30 #, no-c-format msgid "" "Enable tracing\n" "

    Tracing is a mechanism to automatically print values of the choosed " "expressions and continue execution when breakpoint is hit. You can think of " "it as printf debugging that does not require modifying the source.

    " msgstr "" #: languages/cpp/debugger/debuggertracingdialogbase.ui:50 #, no-c-format msgid "Custom format string" msgstr "自定义格式字符串" #: languages/cpp/debugger/debuggertracingdialogbase.ui:89 #, no-c-format msgid "" "Custom format string\n" "

    Specify a C-style format string that will be used when printing the " "choosen expression. For example:\n" "

    Tracepoint 1: g = %d

    \n" "If custom format string is not enabled, names and values of all expressions " "will be printed, using \"%d\" as format specifier for all expressions." msgstr "" #: languages/cpp/debugger/debuggertracingdialogbase.ui:114 #, no-c-format msgid "Expressions to print:" msgstr "要打印的表达式:" #: languages/cpp/debugger/kdevdebugger.rc:5 #: languages/ruby/debugger/kdevrbdebugger.rc:5 #: parts/valgrind/kdevpart_valgrind.rc:4 src/tdevelopui.rc:79 #, no-c-format msgid "&Debug" msgstr "调试(&D)" #: languages/cpp/debugger/kdevdebugger.rc:29 #: languages/ruby/debugger/kdevrbdebugger.rc:21 src/tdevelopui.rc:182 #, no-c-format msgid "Debugger Toolbar" msgstr "调试工具栏" #: languages/cpp/pcsimporter/customimporter/settingsdialogbase.ui:32 #, no-c-format msgid "*.h;*.H;*.hh;*.hxx;*.hpp;*.tlh" msgstr "*.h;*.H;*.hh;*.hxx;*.hpp;*.tlh" #: languages/cpp/pcsimporter/customimporter/settingsdialogbase.ui:40 #, fuzzy, no-c-format msgid "Filename pattern:" msgstr "示例模板" #: languages/cpp/pcsimporter/customimporter/settingsdialogbase.ui:48 #, no-c-format msgid "&Recursive" msgstr "递归(&R)" #: languages/cpp/pcsimporter/qt4importer/settingsdialogbase.ui:24 #, no-c-format msgid "" "Qt4 include directories:\n" "Only the selected entry will be used" msgstr "" #: languages/cpp/pcsimporter/qtimporter/settingsdialogbase.ui:57 #: languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui:54 #, fuzzy, no-c-format msgid "Scope:" msgstr "评分" #: languages/cpp/pcsimporter/qtimporter/settingsdialogbase.ui:73 #, no-c-format msgid "" "Select the Qt configuration for which to create a Code Completion database. " "If you do not know what this option does, accept the default." msgstr "" #: languages/cpp/pcsimporter/qtimporter/settingsdialogbase.ui:104 #, no-c-format msgid "" "Qt3 include directories:\n" "Only the selected entry will be used" msgstr "" #: languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui:24 #, no-c-format msgid "" "TDE include directories:\n" "Only the selected entry will be used" msgstr "" #: languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui:31 #, no-c-format msgid "TDE Libs Headers" msgstr "TDE 库头文件" #: languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui:36 #, no-c-format msgid "All TDE Headers" msgstr "所有 TDE 头文件" #: languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui:46 #, no-c-format msgid "" "Decide if you want to restrict the Code Completion database to only the base " "tdelibs API or the entire TDE include structure" msgstr "" #: languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui:65 #, no-c-format msgid "" "If none of the directories TDevelop found is what you want,you can enter a " "directory of your choice here" msgstr "" #: languages/cpp/subclassingdlgbase.ui:16 #, no-c-format msgid "Create Subclass" msgstr "创建子类" #: languages/cpp/subclassingdlgbase.ui:27 #, no-c-format msgid "Subclass Properties" msgstr "子类属性" #: languages/cpp/subclassingdlgbase.ui:38 #: languages/kjssupport/subclassingdlgbase.ui:122 #, no-c-format msgid "&Specialize following slots:" msgstr "专用下列槽(&S):" #: languages/cpp/subclassingdlgbase.ui:62 #: languages/kjssupport/subclassingdlgbase.ui:165 #: languages/lib/designer_integration/implementationwidgetbase.ui:149 #, no-c-format msgid "C&lass name:" msgstr "类名(&L):" #: languages/cpp/subclassingdlgbase.ui:81 #: languages/kjssupport/subclassingdlgbase.ui:146 #, no-c-format msgid "F&ile name:" msgstr "文件名(&I):" #: languages/cpp/subclassingdlgbase.ui:157 #: languages/kjssupport/subclassingdlgbase.ui:38 #, no-c-format msgid "Re&format source" msgstr "重新排版源代码(&F)" #: languages/cpp/subclassingdlgbase.ui:173 #: languages/kjssupport/subclassingdlgbase.ui:54 #, no-c-format msgid "Reformat source by &default" msgstr "默认重新排版源代码(&D)" #: languages/csharp/csharpconfigwidgetbase.ui:16 #, no-c-format msgid "CSharp" msgstr "" #: languages/csharp/csharpconfigwidgetbase.ui:28 #, fuzzy, no-c-format msgid "CSharp &interpreter:" msgstr "Perl 解释器(&I):" #: languages/csharp/csharpconfigwidgetbase.ui:80 #: languages/perl/perlconfigwidgetbase.ui:80 #: languages/python/pythonconfigwidgetbase.ui:91 #, no-c-format msgid "&Execute programs in a terminal" msgstr "在终端里执行程序(&E)" #: languages/fortran/ftnchekconfigwidgetbase.ui:16 #, no-c-format msgid "Ftnchek Options" msgstr "Ftnchek 选项" #: languages/fortran/ftnchekconfigwidgetbase.ui:37 #, no-c-format msgid "&1" msgstr "&1" #: languages/fortran/ftnchekconfigwidgetbase.ui:48 #, no-c-format msgid "&External subprograms without definition" msgstr "未定义的外部子程序(&E)" #: languages/fortran/ftnchekconfigwidgetbase.ui:56 #, no-c-format msgid "&Divisions" msgstr "" #: languages/fortran/ftnchekconfigwidgetbase.ui:64 #, no-c-format msgid "&Identifiers without explicit type" msgstr "未明确说明类型的标识符(&I)" #: languages/fortran/ftnchekconfigwidgetbase.ui:72 #, no-c-format msgid "&Assume functions have no side effects" msgstr "假定函数没有副作用(&A)" #: languages/fortran/ftnchekconfigwidgetbase.ui:97 #, no-c-format msgid "Ar&guments:" msgstr "参数(&G):" #: languages/fortran/ftnchekconfigwidgetbase.ui:119 #: languages/fortran/ftnchekconfigwidgetbase.ui:172 #: languages/fortran/ftnchekconfigwidgetbase.ui:267 #: languages/fortran/ftnchekconfigwidgetbase.ui:346 #: languages/fortran/ftnchekconfigwidgetbase.ui:425 #: languages/fortran/ftnchekconfigwidgetbase.ui:543 #, no-c-format msgid "Only the following:" msgstr "只有下列:" #: languages/fortran/ftnchekconfigwidgetbase.ui:243 #, no-c-format msgid "Common &blocks:" msgstr "共用块(&B):" #: languages/fortran/ftnchekconfigwidgetbase.ui:256 #, no-c-format msgid "&2" msgstr "&2" #: languages/fortran/ftnchekconfigwidgetbase.ui:278 #, no-c-format msgid "&Truncation and roundoff errors:" msgstr "截断和舍入误差(&T):" #: languages/fortran/ftnchekconfigwidgetbase.ui:297 #, no-c-format msgid "&Use of variables:" msgstr "变量的使用(&U):" #: languages/fortran/ftnchekconfigwidgetbase.ui:406 #, no-c-format msgid "&3" msgstr "&3" #: languages/fortran/ftnchekconfigwidgetbase.ui:513 #, no-c-format msgid "Fortran 77 language &extensions:" msgstr "Fortran 77 语言扩展(&E):" #: languages/fortran/ftnchekconfigwidgetbase.ui:524 #, no-c-format msgid "Other &portability warnings:" msgstr "其它可移植性方面的警告(&P):" #: languages/java/configproblemreporter.ui:27 #, no-c-format msgid "&Parsing" msgstr "分析(&P)" #: languages/java/configproblemreporter.ui:100 #, no-c-format msgid "&Special Headers" msgstr "特殊头文件(&S)" #: languages/lib/designer_integration/implementationwidgetbase.ui:16 #, no-c-format msgid "Create or Select Implementation Class" msgstr "创建或选择实现类" #: languages/lib/designer_integration/implementationwidgetbase.ui:100 #, no-c-format msgid "Create &new class" msgstr "创建新类(&N)" #: languages/lib/designer_integration/implementationwidgetbase.ui:109 #, no-c-format msgid "Class Name" msgstr "类名" #: languages/lib/designer_integration/implementationwidgetbase.ui:167 #, no-c-format msgid "Use &existing class" msgstr "使用已有类(&E)" #: languages/perl/perlconfigwidgetbase.ui:28 #, no-c-format msgid "Perl &interpreter:" msgstr "Perl 解释器(&I):" #: languages/php/phpconfigwidgetbase.ui:16 #, no-c-format msgid "PHP Options" msgstr "PHP 选项" #: languages/php/phpconfigwidgetbase.ui:31 #, no-c-format msgid "Genera&l" msgstr "常规(&L)" #: languages/php/phpconfigwidgetbase.ui:42 #, no-c-format msgid "&Startup" msgstr "启动(&S)" #: languages/php/phpconfigwidgetbase.ui:53 #, no-c-format msgid "Use current file in editor" msgstr "使用编辑器里的当前文件" #: languages/php/phpconfigwidgetbase.ui:67 #, no-c-format msgid "Use &this file as default:" msgstr "默认使用这个文件(&T):" #: languages/php/phpconfigwidgetbase.ui:85 #, no-c-format msgid "Code Help" msgstr "编码帮助" #: languages/php/phpconfigwidgetbase.ui:96 #, no-c-format msgid "&Enable code completion" msgstr "启用代码补全(&E)" #: languages/php/phpconfigwidgetbase.ui:104 #, no-c-format msgid "Enable code &hinting" msgstr "启用代码提示(&H)" #: languages/php/phpconfigwidgetbase.ui:114 #, no-c-format msgid "Parser" msgstr "分析器" #: languages/php/phpconfigwidgetbase.ui:125 #, no-c-format msgid "PHP &include path:" msgstr "PHP 包含路径(&I):" #: languages/php/phpconfigwidgetbase.ui:141 #, no-c-format msgid "Ena&ble realtime parser" msgstr "启用实时分析器(&B)" #: languages/php/phpconfigwidgetbase.ui:189 #, no-c-format msgid "In&vocation" msgstr "调用(&V)" #: languages/php/phpconfigwidgetbase.ui:200 #, fuzzy, no-c-format msgid "Please select how TDevelop should execute your scripts." msgstr "请选择 KDevelop 应该如何执行您的脚本。" #: languages/php/phpconfigwidgetbase.ui:208 #, no-c-format msgid "Invocation Mode" msgstr "调用模式" #: languages/php/phpconfigwidgetbase.ui:222 #, no-c-format msgid "Ca&lling the PHP interpreter directly" msgstr "直接调用 PHP 解释器(&L)" #: languages/php/phpconfigwidgetbase.ui:230 #, no-c-format msgid "" "The php executable is called directly. Ideal for " "developers who want to develop terminal or graphical applications in PHP. \n" "You need a correctly installed php cgi version." msgstr "" "直接调用 PHP 可执行程序,这对用 PHP 开发终端或图形程序的开" "发者最为理想。\n" "您需要一个安装正确的 PHP CGI 版本。" #: languages/php/phpconfigwidgetbase.ui:246 #, no-c-format msgid "Using an &existing webserver (local or remote)" msgstr "使用已有的 Web 服务器(本地或远程)(&E)" #: languages/php/phpconfigwidgetbase.ui:254 #, no-c-format msgid "" "Uses an existing webserver. The pages are previewed in \n" "the internal web browser. Please make sure that the webserver was compiled " "with PHP support." msgstr "" "使用一个外部的 Web 服务器。输出的网页将用内部的 Web 浏览器" "显示。请确保该 Web 服务器编译的时候加入了 PHP 支持。" #: languages/php/phpconfigwidgetbase.ui:289 #, no-c-format msgid "&Webserver" msgstr "Web 服务器(&W)" #: languages/php/phpconfigwidgetbase.ui:300 #, no-c-format msgid "Pro&ject root URL on webserver:" msgstr "工程在 Web 服务器上的根 URL(&J):" #: languages/php/phpconfigwidgetbase.ui:335 #, no-c-format msgid "&Shell" msgstr "Shell(&S)" #: languages/php/phpconfigwidgetbase.ui:346 #, no-c-format msgid "PHP &executable:" msgstr "PHP 可执行文件(&E):" #: languages/php/phpconfigwidgetbase.ui:400 #, no-c-format msgid "PHP &Ini File:" msgstr "PHP Ini 文件(&I):" #: languages/php/phpconfigwidgetbase.ui:449 #, no-c-format msgid "Load &Zend extension:" msgstr "加载 Zend 扩展(&Z):" #: languages/php/phpinfodlg.ui:16 #, no-c-format msgid "PHP Information" msgstr "PHP 信息" #: languages/php/phpnewclassdlgbase.ui:95 #, no-c-format msgid "Class &template:" msgstr "类模板(&T):" #: languages/php/phpnewclassdlgbase.ui:149 #, no-c-format msgid "" "" msgstr "" "" #: languages/python/app_templates/pyqt/documentdetails.ui:16 #, no-c-format msgid "Document Details" msgstr "文档细节" #: languages/python/app_templates/pyqt/documentdetails.ui:35 #, no-c-format msgid "Enter details about this document below." msgstr "在下面输入关于此文档的细节。" #: languages/python/app_templates/pyqt/documentdetails.ui:72 #, no-c-format msgid "Company" msgstr "公司" #: languages/python/pythonconfigwidgetbase.ui:27 #, no-c-format msgid "Python &interpreter:" msgstr "Python 解释器(&I):" #: languages/ruby/app_templates/kxt/appview_base.ui:16 #, no-c-format msgid "%{APPNAMESC}_base" msgstr "%{APPNAMESC}_base" #: languages/ruby/rubyconfigwidgetbase.ui:50 #, no-c-format msgid "Ru&by shell:" msgstr "Ru&by 脚本:" #: languages/ruby/rubyconfigwidgetbase.ui:56 #, no-c-format msgid "" "This is the path (or just name, if in $PATH) to the Ruby shell. Defaults to " "\"irb\". Add this line to your .irbrc file:\n" "def cd(dir) Dir.chdir dir end" msgstr "" #: languages/ruby/rubyconfigwidgetbase.ui:78 #, no-c-format msgid "Program &arguments:" msgstr "程序参数(&A):" #: languages/ruby/rubyconfigwidgetbase.ui:84 #, fuzzy, no-c-format msgid "These are the arguments passed to the Ruby interpreter" msgstr "主程序的命令行参数" #: languages/ruby/rubyconfigwidgetbase.ui:100 #, no-c-format msgid "&Ruby interpreter:" msgstr "Ruby 解释器(&R):" #: languages/ruby/rubyconfigwidgetbase.ui:106 #, no-c-format msgid "" "This is the path (or just name, if in $PATH) to the Ruby interpreter. " "Defaults to \"ruby\"" msgstr "" #: languages/ruby/rubyconfigwidgetbase.ui:122 #, no-c-format msgid "&Main program:" msgstr "主程序(&M):" #: languages/ruby/rubyconfigwidgetbase.ui:128 #, no-c-format msgid "This is the name of the main program source file" msgstr "这是主程序源文件的名称" #: languages/ruby/rubyconfigwidgetbase.ui:192 #, no-c-format msgid "Main pr&ogram" msgstr "主程序(&O)" #: languages/ruby/rubyconfigwidgetbase.ui:200 #, fuzzy, no-c-format msgid "Selected wi&ndow" msgstr "选中窗口(&S)" #: languages/ruby/rubyconfigwidgetbase.ui:210 #, fuzzy, no-c-format msgid "R&un applications in terminal" msgstr "在终端中运行应用程序(&T)" #: languages/ruby/rubyconfigwidgetbase.ui:213 #, no-c-format msgid "" "Check this if you want your applications to be opened in terminal window." msgstr "" #: languages/ruby/rubyconfigwidgetbase.ui:221 #, fuzzy, no-c-format msgid "Enable &debugger floating toolbar" msgstr "允许调试器工具栏浮动(&F)" #: languages/ruby/rubyconfigwidgetbase.ui:224 #, no-c-format msgid "Check this if you want to control the debugger via a floating toolbar." msgstr "" #: languages/ruby/rubyconfigwidgetbase.ui:232 #, no-c-format msgid "Show &constants in the debugger" msgstr "在调试器中显示常量(&C)" #: languages/ruby/rubyconfigwidgetbase.ui:235 #, no-c-format msgid "" "Check this if you want the debugger to show constants (with many constants " "this may be slow)." msgstr "" #: languages/ruby/rubyconfigwidgetbase.ui:243 #, no-c-format msgid "Trace &into Ruby libraries" msgstr "跟踪到 Ruby 库(&I)" #: languages/ruby/rubyconfigwidgetbase.ui:246 #, no-c-format msgid "Trace through the Ruby code installed under sitedir in the debugger" msgstr "" #: languages/ruby/rubyconfigwidgetbase.ui:262 #, no-c-format msgid "Character Coding" msgstr "字符编码" #: languages/ruby/rubyconfigwidgetbase.ui:273 #, no-c-format msgid "ASCII" msgstr "ASCII" #: languages/ruby/rubyconfigwidgetbase.ui:284 #, no-c-format msgid "EUC" msgstr "EUC" #: languages/ruby/rubyconfigwidgetbase.ui:295 #, no-c-format msgid "S&JIS" msgstr "S&JIS" #: languages/ruby/rubyconfigwidgetbase.ui:306 #, no-c-format msgid "UTF-&8" msgstr "UTF-&8" #: languages/sql/sqlconfigwidget.ui:30 #, no-c-format msgid "Database Name" msgstr "数据库名称" #: languages/sql/sqlconfigwidget.ui:38 #, no-c-format msgid "Host" msgstr "主机" #: languages/sql/sqlconfigwidget.ui:46 #, no-c-format msgid "Port" msgstr "端口" #: languages/sql/sqlconfigwidget.ui:54 #, no-c-format msgid "Username" msgstr "用户名" #: languages/sql/sqlconfigwidget.ui:62 #, no-c-format msgid "Password" msgstr "密码" #: languages/sql/sqlconfigwidget.ui:86 #, no-c-format msgid "Warning: password will be saved with weak encryption." msgstr "警告:密码将以简单加密保存。" #: languages/sql/sqlconfigwidget.ui:127 #, no-c-format msgid "&Test" msgstr "测试(&T)" #: parts/abbrev/abbrevconfigwidgetbase.ui:16 #, no-c-format msgid "Code Templates" msgstr "代码模板" #: parts/abbrev/abbrevconfigwidgetbase.ui:27 #, no-c-format msgid "Co&de:" msgstr "代码(&D):" #: parts/abbrev/abbrevconfigwidgetbase.ui:43 #, no-c-format msgid "&Enable automatic word completion" msgstr "启用自动单词补全(&E)" #: parts/abbrev/abbrevconfigwidgetbase.ui:87 #, no-c-format msgid "Suffixes" msgstr "后缀" #: parts/abbrev/abbrevconfigwidgetbase.ui:119 #, no-c-format msgid "&Templates:" msgstr "模板(&T):" #: parts/abbrev/addtemplatedlgbase.ui:16 #, no-c-format msgid "Add Code Template" msgstr "添加代码模板" #: parts/abbrev/addtemplatedlgbase.ui:96 parts/distpart/distpart_ui.ui:732 #: src/profileengine/editor/addprofilewidget.ui:105 #, no-c-format msgid "&Description:" msgstr "描述(&D):" #: parts/abbrev/addtemplatedlgbase.ui:139 #, no-c-format msgid "&Suffixes:" msgstr "后缀(&S):" #: parts/appwizard/appwizarddlgbase.ui:16 #, no-c-format msgid "Create New Project" msgstr "创建新工程" #: parts/appwizard/appwizarddlgbase.ui:38 #, no-c-format msgid "&All Projects" msgstr "全部工程(&A)" #: parts/appwizard/appwizarddlgbase.ui:94 #, no-c-format msgid "&Show all project templates" msgstr "显示全部工程模板(&S)" #: parts/appwizard/appwizarddlgbase.ui:107 #, no-c-format msgid "&Favorites" msgstr "收藏夹(&F)" #: parts/appwizard/appwizarddlgbase.ui:193 #, no-c-format msgid "Application &name:" msgstr "应用程序名称(&N):" #: parts/appwizard/appwizarddlgbase.ui:204 #: parts/documentation/docprojectconfigwidgetbase.ui:114 #: parts/documentation/editbookmarkdlg.ui:43 #: parts/documentation/editcatalogdlgbase.ui:122 #, no-c-format msgid "&Location:" msgstr "位置(&L):" #: parts/appwizard/appwizarddlgbase.ui:215 #, no-c-format msgid "Final location:" msgstr "最终位置:" #: parts/appwizard/appwizarddlgbase.ui:267 #, no-c-format msgid "TextLabel4" msgstr "TextLabel4" #: parts/appwizard/appwizarddlgbase.ui:340 #, no-c-format msgid "General Options" msgstr "生成选项" #: parts/appwizard/appwizarddlgbase.ui:359 src/generalinfowidgetbase.ui:75 #, no-c-format msgid "Author:" msgstr "作者:" #: parts/appwizard/appwizarddlgbase.ui:370 src/generalinfowidgetbase.ui:83 #, no-c-format msgid "Email:" msgstr "电子邮件:" #: parts/appwizard/appwizarddlgbase.ui:381 src/generalinfowidgetbase.ui:91 #, no-c-format msgid "Version:" msgstr "版本:" #: parts/appwizard/appwizarddlgbase.ui:444 #, no-c-format msgid "0.1" msgstr "0.1" #: parts/appwizard/appwizarddlgbase.ui:452 #, no-c-format msgid "License:" msgstr "许可协议:" #: parts/appwizard/appwizarddlgbase.ui:501 #, no-c-format msgid "Custom Options" msgstr "自定义选项" #: parts/appwizard/filepropspagebase.ui:24 #, no-c-format msgid "Customize" msgstr "自定义" #: parts/appwizard/filepropspagebase.ui:48 #, no-c-format msgid "Base class:" msgstr "基类:" #: parts/appwizard/filepropspagebase.ui:66 #, no-c-format msgid "Implementation file:" msgstr "实现文件:" #: parts/appwizard/filepropspagebase.ui:74 #, no-c-format msgid "Header file:" msgstr "头文件:" #: parts/appwizard/filepropspagebase.ui:89 #, no-c-format msgid "Classes:" msgstr "类:" #: parts/appwizard/importdlgbase.ui:16 #, no-c-format msgid "Import Existing Project" msgstr "导入已有的工程" #: parts/appwizard/importdlgbase.ui:65 #, no-c-format msgid "Fetch &Module" msgstr "获取模块(&M)" #: parts/appwizard/importdlgbase.ui:79 #, no-c-format msgid "&Fetch from:" msgstr "获取来源(&F):" #: parts/appwizard/importdlgbase.ui:90 #, no-c-format msgid "Project &name:" msgstr "工程名称(&N):" #: parts/appwizard/importdlgbase.ui:176 #, no-c-format msgid "&Project type:" msgstr "工程类型(&P):" #: parts/appwizard/importdlgbase.ui:223 #, no-c-format msgid "&Email:" msgstr "电子邮件(&E):" #: parts/appwizard/importdlgbase.ui:242 parts/appwizard/importdlgbase.ui:262 #, no-c-format msgid "" "If there exists a file AUTHOR in the\n" "directory, and it has email addresses\n" "formated as XXXX <.....> the XXXX\n" "will be the author, everything between \n" "<....> is the email address." msgstr "" #: parts/appwizard/importdlgbase.ui:291 #, no-c-format msgid "&Author:" msgstr "作者(&A):" #: parts/appwizard/importdlgbase.ui:305 #, no-c-format msgid "Generate build system infrastructure" msgstr "生成构建系统架构" #: parts/appwizard/vcs_form.ui:16 #, no-c-format msgid "Vcs Form" msgstr "版本控制表" #: parts/appwizard/vcs_form.ui:40 #, no-c-format msgid "&Version control system:" msgstr "版本控制系统(&V):" #: parts/astyle/astyleconfig.ui:24 #, no-c-format msgid "Artistic Style Configuration" msgstr "艺术风格配置" #: parts/astyle/astyleconfig.ui:78 #, no-c-format msgid "&Style" msgstr "风格(&S)" #: parts/astyle/astyleconfig.ui:89 #, no-c-format msgid "&User defined" msgstr "用户定义的(&U)" #: parts/astyle/astyleconfig.ui:98 #, no-c-format msgid "Select options from other tabs." msgstr "" #: parts/astyle/astyleconfig.ui:106 #, no-c-format msgid "&ANSI" msgstr "&ANSI 标准" #: parts/astyle/astyleconfig.ui:112 #, no-c-format msgid "" "ANSI style formatting/indenting.\n" "Brackets Break\n" "Use 4 spaces\n" "Indent Bracket=false\n" "Indent Class=false\n" "Indent Switch=false\n" "Indent NameSpace=false" msgstr "" #: parts/astyle/astyleconfig.ui:126 #, no-c-format msgid "&Kernighan && Ritchie" msgstr "&Kernighan 和 Ritchie" #: parts/astyle/astyleconfig.ui:132 #, no-c-format msgid "" "Kernighan & Ritchie style formatting/indenting.\n" "Brackets Attach\n" "Use 4 spaces\n" "Indent Class=false\n" "Indent Switch=false\n" "Indent Namespaces=false\n" msgstr "" #: parts/astyle/astyleconfig.ui:146 #, fuzzy, no-c-format msgid "Linu&x" msgstr "Linux" #: parts/astyle/astyleconfig.ui:152 #, no-c-format msgid "" "Linux mode (8 spaces per indent, break definition-block brackets but attach " "command-block brackets).\n" "Brackets Linux\n" "Use 8 spaces\n" "Indent Bracket=false\n" "Indent Class=false\n" "Indent Switch=false\n" "Indent NameSpace=false" msgstr "" #: parts/astyle/astyleconfig.ui:166 #, no-c-format msgid "G&NU" msgstr "G&NU" #: parts/astyle/astyleconfig.ui:172 #, no-c-format msgid "" "GNU style formatting/indenting.\n" "Brackets Break\n" "Use 2 spaces\n" "Indent Block=true\n" "Indent Bracket=false\n" "Indent Class=false\n" "Indent Switch=false\n" "Indent NameSpace=false" msgstr "" #: parts/astyle/astyleconfig.ui:187 #, no-c-format msgid "&JAVA" msgstr "&JAVA" #: parts/astyle/astyleconfig.ui:193 #, no-c-format msgid "" "Java mode, with standard java style formatting/indenting.\n" "Java Style\n" "Use 4 spaces\n" "Brackets Attach\n" "Indent Bracket=false\n" "Indent Switch=false" msgstr "" #: parts/astyle/astyleconfig.ui:206 #, fuzzy, no-c-format msgid "Use Global &Options" msgstr "Haskell 选项" #: parts/astyle/astyleconfig.ui:212 #, no-c-format msgid "" "Use the global defaults. See the menu:\n" "Settings/Configure TDevelop/Formatting." msgstr "" #: parts/astyle/astyleconfig.ui:231 #, fuzzy, no-c-format msgid "Files to format" msgstr "要载入的文件" #: parts/astyle/astyleconfig.ui:250 #, no-c-format msgid "" "*.c *.h\n" "*.cpp *.hpp \n" "*.C *.H \n" "*.cxx *.hxx \n" "*.cc *.hh \n" "*.c++ *.h++\n" "*.inl *.tlh\n" "*.moc *.xpm\n" "*.diff *.patch\n" "*.java" msgstr "" #: parts/astyle/astyleconfig.ui:265 parts/astyle/astyleconfig.ui:271 #, no-c-format msgid "" "Set the extensions of files that the\n" "formatter will try to reformat. Use a\n" "space separated list, e.g. *.cpp *.hpp.\n" "Can use * on its own for any file." msgstr "" #: parts/astyle/astyleconfig.ui:286 #, fuzzy, no-c-format msgid "Tab && Bra&ckets" msgstr "方括号" #: parts/astyle/astyleconfig.ui:303 #, no-c-format msgid "&Filling" msgstr "填充(&F)" #: parts/astyle/astyleconfig.ui:317 #, fuzzy, no-c-format msgid "Fill empt&y lines" msgstr "文件模板" #: parts/astyle/astyleconfig.ui:320 #, no-c-format msgid "Fill empty lines with the white space of their previous lines." msgstr "" #: parts/astyle/astyleconfig.ui:336 #, fuzzy, no-c-format msgid "U&se tabs" msgstr "用制表符(&T)" #: parts/astyle/astyleconfig.ui:356 #, fuzzy, no-c-format msgid "Number of spaces to use per indent." msgstr "每行的枚举数目" #: parts/astyle/astyleconfig.ui:367 #, no-c-format msgid "Con&vert tabs" msgstr "" #: parts/astyle/astyleconfig.ui:370 #, no-c-format msgid "Convert tabs to spaces." msgstr "" #: parts/astyle/astyleconfig.ui:398 #, fuzzy, no-c-format msgid "&Use spaces:" msgstr "用空格填充(&P):" #: parts/astyle/astyleconfig.ui:415 #, no-c-format msgid "" "Number of spaces that will be converted to a tab.\n" "The number of spaces per tab is controled by the editor." msgstr "" #: parts/astyle/astyleconfig.ui:427 #, fuzzy, no-c-format msgid "F&orce tabs" msgstr "强制重新编辑" #: parts/astyle/astyleconfig.ui:430 #, no-c-format msgid "Force tabs to be used in areas Astyle would prefer to use spaces." msgstr "" #: parts/astyle/astyleconfig.ui:465 #, no-c-format msgid "Brackets" msgstr "方括号" #: parts/astyle/astyleconfig.ui:487 #, fuzzy, no-c-format msgid "&No Change" msgstr "文件已更改" #: parts/astyle/astyleconfig.ui:493 #, fuzzy, no-c-format msgid "The brackets will not be changed." msgstr "这个项目无法删除" #: parts/astyle/astyleconfig.ui:501 #, no-c-format msgid "&Break" msgstr "断开(&B)" #: parts/astyle/astyleconfig.ui:507 #, no-c-format msgid "Break brackets from pre-block code (i.e. ANSI C/C++ style)." msgstr "" #: parts/astyle/astyleconfig.ui:515 #, no-c-format msgid "&Attach" msgstr "粘连(&A)" #: parts/astyle/astyleconfig.ui:518 #, no-c-format msgid "" "Attach brackets to pre-block code (i.e. Java/K&R style).\n" "See also Formatting/Blocks/Break if-else" msgstr "" #: parts/astyle/astyleconfig.ui:527 #, fuzzy, no-c-format msgid "Linu&x style" msgstr "Linux 风格(&N)" #: parts/astyle/astyleconfig.ui:530 #, no-c-format msgid "" "Break brackets from class/function declarations, \n" "but attach brackets to pre-block command statements." msgstr "" #: parts/astyle/astyleconfig.ui:544 #, fuzzy, no-c-format msgid "Brea&k closing headers" msgstr "预编译头文件" #: parts/astyle/astyleconfig.ui:547 #, no-c-format msgid "" "Break brackets before closing headers (e.g. 'else', 'catch', ...)\n" "from their immediately preceding closing brackets." msgstr "" #: parts/astyle/astyleconfig.ui:560 #, no-c-format msgid "&Indentation" msgstr "缩进(&I)" #: parts/astyle/astyleconfig.ui:577 #, no-c-format msgid "Contin&uation" msgstr "连续(&U)" #: parts/astyle/astyleconfig.ui:591 parts/astyle/astyleconfig.ui:603 #, no-c-format msgid "" "Indent a maximal # spaces in a continuous statement,\n" "relative to the previous line." msgstr "" #: parts/astyle/astyleconfig.ui:600 #, no-c-format msgid "Maximum in statement:" msgstr "语句里最多使用个数:" #: parts/astyle/astyleconfig.ui:612 #, no-c-format msgid "Minimum in conditional:" msgstr "条件里至少使用个数" #: parts/astyle/astyleconfig.ui:615 parts/astyle/astyleconfig.ui:633 #, no-c-format msgid "" "Indent a minimal # spaces in a continuous conditional\n" "belonging to a conditional header." msgstr "" #: parts/astyle/astyleconfig.ui:624 #, no-c-format msgid "Twice current" msgstr "双倍于当前" #: parts/astyle/astyleconfig.ui:650 #, no-c-format msgid "Indented &Entities" msgstr "缩进的实体(&E)" #: parts/astyle/astyleconfig.ui:661 #, fuzzy, no-c-format msgid "&Switches" msgstr "切换到" #: parts/astyle/astyleconfig.ui:664 #, no-c-format msgid "" "Indent 'switch' blocks, so that the inner 'case XXX:'\n" "headers are indented in relation to the switch block." msgstr "" #: parts/astyle/astyleconfig.ui:673 #, fuzzy, no-c-format msgid "&Case statements" msgstr "创建元素" #: parts/astyle/astyleconfig.ui:676 #, no-c-format msgid "" "Indent case blocks from the 'case XXX:' headers.\n" "Case statements not enclosed in blocks are NOT indented." msgstr "" #: parts/astyle/astyleconfig.ui:685 #, fuzzy, no-c-format msgid "Cla&sses" msgstr "类" #: parts/astyle/astyleconfig.ui:688 #, no-c-format msgid "" "Indent 'class' blocks, so that the inner 'public:',\n" "'protected:' and 'private: headers are indented in\n" "relation to the class block." msgstr "" #: parts/astyle/astyleconfig.ui:698 #, fuzzy, no-c-format msgid "&Brackets" msgstr "方括号" #: parts/astyle/astyleconfig.ui:701 #, no-c-format msgid "Add extra indentation to '{' and '}' block brackets." msgstr "" #: parts/astyle/astyleconfig.ui:709 #, fuzzy, no-c-format msgid "&Namespaces" msgstr "命名空间(&S):" #: parts/astyle/astyleconfig.ui:712 #, no-c-format msgid "Indent the contents of namespace blocks." msgstr "" #: parts/astyle/astyleconfig.ui:720 #, fuzzy, no-c-format msgid "L&abels" msgstr "Label4" #: parts/astyle/astyleconfig.ui:726 #, no-c-format msgid "" "Indent labels so that they appear one indent less than\n" "the current indentation level, rather than being\n" "flushed completely to the left (which is the default)." msgstr "" #: parts/astyle/astyleconfig.ui:736 #, fuzzy, no-c-format msgid "Bloc&ks" msgstr "程序块" #: parts/astyle/astyleconfig.ui:739 #, no-c-format msgid "Add extra indentation entire blocks (including brackets)." msgstr "" #: parts/astyle/astyleconfig.ui:750 #, fuzzy, no-c-format msgid "#Prepr&ocessors" msgstr "预处理器" #: parts/astyle/astyleconfig.ui:753 #, no-c-format msgid "Indent multi-line #define statements." msgstr "" #: parts/astyle/astyleconfig.ui:765 #, fuzzy, no-c-format msgid "For&matting" msgstr "格式化" #: parts/astyle/astyleconfig.ui:782 #, fuzzy, no-c-format msgid "Blocks" msgstr "程序块" #: parts/astyle/astyleconfig.ui:793 #, fuzzy, no-c-format msgid "&Break blocks" msgstr "断点(&B)" #: parts/astyle/astyleconfig.ui:796 #, no-c-format msgid "" "Insert empty lines around unrelated blocks, labels, classes,...\n" "Known problems:\n" "\n" "1. If a statement is NOT part of a block, \n" "the following statements are all double spaced. \n" "Statements enclosed in a block are formatted \n" "correctly.\n" "\n" "2. Comments are broken from the block.\n" msgstr "" #: parts/astyle/astyleconfig.ui:813 #, no-c-format msgid "Break bl&ocks all" msgstr "" #: parts/astyle/astyleconfig.ui:816 #, no-c-format msgid "" "Like --break-blocks, except also insert empty lines \n" "around closing headers (e.g. 'else', 'catch', ...).\n" "\n" "Known problems:\n" "\n" "1. If a statement is NOT part of a block, \n" "the following statements are all double spaced. \n" "Statements enclosed in a block are formatted \n" "correctly.\n" "\n" "2. Comments are broken from the block.\n" msgstr "" #: parts/astyle/astyleconfig.ui:835 #, no-c-format msgid "Break i&f-else" msgstr "" #: parts/astyle/astyleconfig.ui:838 #, no-c-format msgid "Break 'else if()' statements into two different lines." msgstr "" #: parts/astyle/astyleconfig.ui:854 #, no-c-format msgid "Padding" msgstr "填充" #: parts/astyle/astyleconfig.ui:865 #, fuzzy, no-c-format msgid "Add spa&ces inside parentheses" msgstr "在括号两边加空格(&P)" #: parts/astyle/astyleconfig.ui:868 #, no-c-format msgid "Insert space padding around parenthesis on the inside only." msgstr "" #: parts/astyle/astyleconfig.ui:876 #, fuzzy, no-c-format msgid "A&dd spaces outside parentheses" msgstr "在括号两边加空格(&P)" #: parts/astyle/astyleconfig.ui:879 #, no-c-format msgid "Insert space padding around parenthesis on the outside only." msgstr "" #: parts/astyle/astyleconfig.ui:887 #, fuzzy, no-c-format msgid "Remove &unnecessary spaces around parentheses" msgstr "在括号两边加空格(&P)" #: parts/astyle/astyleconfig.ui:890 #, no-c-format msgid "Remove unnecessary space padding around parenthesis." msgstr "" #: parts/astyle/astyleconfig.ui:898 #, fuzzy, no-c-format msgid "&Add spaces around operators" msgstr "在运算符两边加空格(&R)" #: parts/astyle/astyleconfig.ui:901 #, no-c-format msgid "" "Insert space padding around operators.\n" "Once padded, operators stay padded.\n" "There is no unpad operator option." msgstr "" #: parts/astyle/astyleconfig.ui:919 #, no-c-format msgid "One Liners" msgstr "单行语句" #: parts/astyle/astyleconfig.ui:930 #, fuzzy, no-c-format msgid "&Keep one-line statements" msgstr "保留单行语句(&S)" #: parts/astyle/astyleconfig.ui:933 #, no-c-format msgid "" "Do not break lines containing multiple statements into\n" "multiple single-statement lines." msgstr "" #: parts/astyle/astyleconfig.ui:942 #, fuzzy, no-c-format msgid "Keep o&ne-line blocks" msgstr "保留单行块(&L)" #: parts/astyle/astyleconfig.ui:945 #, no-c-format msgid "Do not break blocks residing completely on one line." msgstr "" #: parts/astyle/astyleconfig.ui:966 #, no-c-format msgid "Example" msgstr "例子" #: parts/astyle/kdevpart_astyle.rc:12 #, fuzzy, no-c-format msgid "Astyle Toolbar" msgstr "文件工具栏" #: parts/bookmarks/bookmarks_settings_base.ui:24 #, no-c-format msgid "Code Tooltip" msgstr "代码提示" #: parts/bookmarks/bookmarks_settings_base.ui:27 #, no-c-format msgid "" "If checked, a tooltip will be shown when the mouse is over the bookmark, " "containing the text in the area surrounding it.

    How many surrounding " "lines to include is decided by the value in the context box." msgstr "" #: parts/bookmarks/bookmarks_settings_base.ui:38 #, no-c-format msgid "Show code &tooltip" msgstr "显示代码提示(&T)" #: parts/bookmarks/bookmarks_settings_base.ui:63 #, no-c-format msgid "&Lines of context:" msgstr "上下文所在行(&L):" #: parts/bookmarks/bookmarks_settings_base.ui:115 #, no-c-format msgid "Show Bookmarked Codeline in Bookmark Panel" msgstr "在书签面板显示做过书签的代码行" #: parts/bookmarks/bookmarks_settings_base.ui:118 #, no-c-format msgid "" "This decides if the bookmark panel should show the content of the bookmarked " "line in addition to the line number.

    This can be made optional depending " "on the start of the line, typically used for only showing lines containing a " "comment." msgstr "" #: parts/bookmarks/bookmarks_settings_base.ui:129 #, no-c-format msgid "&Never" msgstr "从不(&N)" #: parts/bookmarks/bookmarks_settings_base.ui:151 #, no-c-format msgid "&Only lines beginning with the following string:" msgstr "仅以以下字符串开头的行(&O):" #: parts/bookmarks/bookmarks_settings_base.ui:189 #, no-c-format msgid "&Always" msgstr "总是(&A)" #: parts/bookmarks/bookmarks_settings_base.ui:192 #, no-c-format msgid "Always show the bookmarked line in addition to the line number" msgstr "始终显示除行号外的标记过的行" #: parts/classview/kdevclassview.rc:14 src/kdevassistantui.rc:150 #: src/tdevelopui.rc:165 #, no-c-format msgid "Browser Toolbar" msgstr "浏览器工具栏" #: parts/ctags2/ctags2_createtagfilebase.ui:16 #, fuzzy, no-c-format msgid "Create new tags file" msgstr "创建新文件" #: parts/ctags2/ctags2_createtagfilebase.ui:40 #, no-c-format msgid "Target tags file path:" msgstr "" #: parts/ctags2/ctags2_createtagfilebase.ui:53 #, fuzzy, no-c-format msgid "Directory to tag:" msgstr "目录:" #: parts/ctags2/ctags2_createtagfilebase.ui:91 #, fuzzy, no-c-format msgid "&Create" msgstr "创建(&R)" #: parts/ctags2/ctags2_createtagfilebase.ui:99 #: vcs/subversion/svn_commitdlgbase.ui:98 #: vcs/subversion/svn_logviewoptiondlgbase.ui:88 #, fuzzy, no-c-format msgid "C&ancel" msgstr "变更日志(&H):" #: parts/ctags2/ctags2_selecttagfilebase.ui:16 #, fuzzy, no-c-format msgid "Add tags file" msgstr "添加已有的文件" #: parts/ctags2/ctags2_selecttagfilebase.ui:40 #, fuzzy, no-c-format msgid "Tags file:" msgstr "标记文件" #: parts/ctags2/ctags2_settingswidgetbase.ui:47 #, no-c-format msgid "Editor Context Menu" msgstr "编辑器环境菜单" #: parts/ctags2/ctags2_settingswidgetbase.ui:58 #, fuzzy, no-c-format msgid "Show \"&Go To Declaration\"" msgstr "显示“转到声明”" #: parts/ctags2/ctags2_settingswidgetbase.ui:61 #, no-c-format msgid "" "If checked, an option to go directly to the matching tag declaration will be " "shown. If more than one match, all matches will be shown in the main ctags " "result view." msgstr "" #: parts/ctags2/ctags2_settingswidgetbase.ui:69 #, fuzzy, no-c-format msgid "Show \"Go To &Definition\"" msgstr "显示“转到定义”" #: parts/ctags2/ctags2_settingswidgetbase.ui:72 #, no-c-format msgid "" "If checked, an option to go directly to the matching tag definition will be " "shown. If more than one match, all matches will be shown in the main ctags " "result view." msgstr "" #: parts/ctags2/ctags2_settingswidgetbase.ui:80 #, fuzzy, no-c-format msgid "Show \"CT&ags Lookup\"" msgstr "显示“CTags 查阅”" #: parts/ctags2/ctags2_settingswidgetbase.ui:83 #, no-c-format msgid "" "If checked, an option to do a full lookup of all macthing tags is shown in " "the context menu. The results will be shown in the main ctags results view." msgstr "" #: parts/ctags2/ctags2_settingswidgetbase.ui:112 #, no-c-format msgid "When more than one hit, go directl&y to the first" msgstr "" #: parts/ctags2/ctags2_settingswidgetbase.ui:115 #, no-c-format msgid "" "If more than one hit was produced from an attempt to find an exact match, go " "to the first match in the list. Note: the Go To Next Match shortcut " "can be used to step between the matches." msgstr "" #: parts/ctags2/ctags2_settingswidgetbase.ui:123 #, no-c-format msgid "&Use custom tagfile generation arguments" msgstr "" #: parts/ctags2/ctags2_settingswidgetbase.ui:126 #, no-c-format msgid "" "The default arguments should be fine, but if needed a custom generation " "arguments string can be used." msgstr "" #: parts/ctags2/ctags2_settingswidgetbase.ui:140 #, no-c-format msgid "" "Enter custom arguments to ctags database creation here. Note: do not set a " "custom tags file filename here, do that below instead." msgstr "" #: parts/ctags2/ctags2_settingswidgetbase.ui:158 #, no-c-format msgid "Paths" msgstr "路径" #: parts/ctags2/ctags2_settingswidgetbase.ui:161 #: parts/ctags2/ctags2_settingswidgetbase.ui:180 #, no-c-format msgid "" "Enter the path to the exuberant ctags binary. If empty, ctags will be " "executed via $PATH. Note that it is sometimes installed as exuberant-" "ctags." msgstr "" #: parts/ctags2/ctags2_settingswidgetbase.ui:172 #, no-c-format msgid "Path to ctags binary:" msgstr "ctags 二进制路径:" #: parts/ctags2/ctags2_settingswidgetbase.ui:209 #, fuzzy, no-c-format msgid "Mana&ge tag files" msgstr "生成标记文件" #: parts/ctags2/ctags2_settingswidgetbase.ui:228 #, fuzzy, no-c-format msgid "Path to project tag file:" msgstr "工程类型(&P):" #: parts/ctags2/ctags2_settingswidgetbase.ui:236 #, no-c-format msgid "" "Enter the full path of the project tagfile. If empty, the file will be " "called tags and reside in the root of the project." msgstr "" #: parts/ctags2/ctags2_settingswidgetbase.ui:246 #, fuzzy, no-c-format msgid "Other tag files:" msgstr "其它文件" #: parts/ctags2/ctags2_settingswidgetbase.ui:262 #, fuzzy, no-c-format msgid "&Create..." msgstr "正在创建..." #: parts/ctags2/ctags2_settingswidgetbase.ui:278 #, fuzzy, no-c-format msgid "Remo&ve" msgstr "删除(&M)" #: parts/ctags2/ctags2_settingswidgetbase.ui:314 #, fuzzy, no-c-format msgid "Tags file" msgstr "标记文件" #: parts/ctags2/ctags2_widgetbase.ui:28 #, no-c-format msgid "Tag" msgstr "标记" #: parts/ctags2/ctags2_widgetbase.ui:69 #, no-c-format msgid "" "Result view for a tag lookup. Click a line to go to the corresponding place " "in the code." msgstr "" #: parts/ctags2/ctags2_widgetbase.ui:93 #, no-c-format msgid "" "Type the identifier you want to lookup.

    The identifier will populate and " "display a reducing list as you type." msgstr "" #: parts/ctags2/ctags2_widgetbase.ui:101 #, no-c-format msgid "Hits:" msgstr "次数:" #: parts/ctags2/ctags2_widgetbase.ui:126 #, no-c-format msgid "Date:" msgstr "日期:" #: parts/ctags2/ctags2_widgetbase.ui:137 #, no-c-format msgid "Regenerate" msgstr "重新生成" #: parts/ctags2/ctags2_widgetbase.ui:140 #, no-c-format msgid "" "Press to regenerate CTags database.

    This will take some time on a large " "project." msgstr "" #: parts/distpart/distpart_ui.ui:37 #, no-c-format msgid "Prepare for Release" msgstr "准备发布版本" #: parts/distpart/distpart_ui.ui:79 #, no-c-format msgid "

    Project Packaging & Publishing

    " msgstr "

    工程打包和发布

    " #: parts/distpart/distpart_ui.ui:135 #, fuzzy, no-c-format msgid "Source &Distribution" msgstr "源代码发布(&S)" #: parts/distpart/distpart_ui.ui:151 #, no-c-format msgid "&Use custom options" msgstr "使用自定义选项(&U)" #: parts/distpart/distpart_ui.ui:154 #, no-c-format msgid "Default is: %n-%v.tar.gz" msgstr "" #: parts/distpart/distpart_ui.ui:173 #, no-c-format msgid "Source Options" msgstr "源代码选项" #: parts/distpart/distpart_ui.ui:184 #, no-c-format msgid "Use &bzip2 instead of gzip" msgstr "使用 bzip2 代替 gzip(&B)" #: parts/distpart/distpart_ui.ui:203 #, no-c-format msgid "" "Archive name format:
    %n - File name
    %v - File version
    " "%d - Date of archive" msgstr "" "归档文件名格式:
    %n - 文件名
    %v - 文件版本
    %d - 归档日期" #: parts/distpart/distpart_ui.ui:214 #, no-c-format msgid "%n-%v" msgstr "%n-%v" #: parts/distpart/distpart_ui.ui:217 #, fuzzy, no-c-format msgid "Enter the filename using the format options. " msgstr "输入仓库名" #: parts/distpart/distpart_ui.ui:254 #, fuzzy, no-c-format msgid "&Add Files" msgstr "添加文件" #: parts/distpart/distpart_ui.ui:270 #, fuzzy, no-c-format msgid "&Create Source Archive" msgstr "创建源代码归档(&A)" #: parts/distpart/distpart_ui.ui:286 parts/distpart/distpart_ui.ui:919 #, no-c-format msgid "R&eset" msgstr "重置(&E)" #: parts/distpart/distpart_ui.ui:309 #, fuzzy, no-c-format msgid "Package &Information" msgstr "打包信息(&P)" #: parts/distpart/distpart_ui.ui:349 #, no-c-format msgid "Ve&ndor:" msgstr "制作者(&N):" #: parts/distpart/distpart_ui.ui:381 #, fuzzy, no-c-format msgid "Application name" msgstr "应用程序名称(&N):" #: parts/distpart/distpart_ui.ui:402 #, no-c-format msgid "&Application name:" msgstr "应用程序名称(&A):" #: parts/distpart/distpart_ui.ui:413 #, no-c-format msgid "S&ummary:" msgstr "摘要(&U):" #: parts/distpart/distpart_ui.ui:435 #, no-c-format msgid "R&elease:" msgstr "发布版本号(&E):" #: parts/distpart/distpart_ui.ui:446 #, no-c-format msgid "&Version:" msgstr "版本(&V):" #: parts/distpart/distpart_ui.ui:491 #, no-c-format msgid "" "Version of the file package.\n" "Menu item: Project/Project Options/General/Version\n" "changes project compiled version number" msgstr "" #: parts/distpart/distpart_ui.ui:501 #, no-c-format msgid "&Group:" msgstr "组(&G):" #: parts/distpart/distpart_ui.ui:512 #, no-c-format msgid "Pac&kager:" msgstr "打包者(&K):" #: parts/distpart/distpart_ui.ui:538 #, no-c-format msgid "Advanced Package Op&tions" msgstr "高级打包选项(&T)" #: parts/distpart/distpart_ui.ui:549 #, fuzzy, no-c-format msgid "&Create development package" msgstr "创建开发包" #: parts/distpart/distpart_ui.ui:557 #, no-c-format msgid "Create documentation package" msgstr "创建文档包" #: parts/distpart/distpart_ui.ui:565 #, no-c-format msgid "Include application icon" msgstr "包含应用程序图标" #: parts/distpart/distpart_ui.ui:573 #, no-c-format msgid "" "Architecture target:
    (Note: You must have a compiler that supports " "this target)" msgstr "目标平台:
    (注意:您必须有一个支持此目标平台的编译器。)" #: parts/distpart/distpart_ui.ui:579 #, no-c-format msgid "i386" msgstr "i386" #: parts/distpart/distpart_ui.ui:584 #, no-c-format msgid "i586" msgstr "i586" #: parts/distpart/distpart_ui.ui:589 #, no-c-format msgid "i686" msgstr "i686" #: parts/distpart/distpart_ui.ui:594 #, no-c-format msgid "AMD K6" msgstr "AMD K6" #: parts/distpart/distpart_ui.ui:599 #, no-c-format msgid "AMD K7" msgstr "AMD K7" #: parts/distpart/distpart_ui.ui:604 #, no-c-format msgid "PPC" msgstr "PowerPC" #: parts/distpart/distpart_ui.ui:609 #, no-c-format msgid "PPC G3" msgstr "PowerPC G3" #: parts/distpart/distpart_ui.ui:614 #, no-c-format msgid "PPC Altevec" msgstr "PowerPC Altevec" #: parts/distpart/distpart_ui.ui:619 #, no-c-format msgid "Dec Alpha (AXP)" msgstr "Dec Alpha (AXP)" #: parts/distpart/distpart_ui.ui:624 #, no-c-format msgid "Sparc" msgstr "Sparc" #: parts/distpart/distpart_ui.ui:668 #, fuzzy, no-c-format msgid "" "&Build Source \n" "Package" msgstr "构建源代码包" #: parts/distpart/distpart_ui.ui:677 #, fuzzy, no-c-format msgid "" "Build Binar&y \n" "Package" msgstr "构建二进制包" #: parts/distpart/distpart_ui.ui:686 #, fuzzy, no-c-format msgid "" "E&xport \n" "Build Files" msgstr "导出构建文件" #: parts/distpart/distpart_ui.ui:695 #, fuzzy, no-c-format msgid "" "I&mport \n" "Build Files" msgstr "导入构建文件" #: parts/distpart/distpart_ui.ui:777 #, no-c-format msgid "C&hangelog:" msgstr "变更日志(&H):" #: parts/distpart/distpart_ui.ui:807 #, fuzzy, no-c-format msgid "Pr&oject Publishing" msgstr "工程发布(&R)" #: parts/distpart/distpart_ui.ui:826 #, no-c-format msgid "Local Options" msgstr "本地选项" #: parts/distpart/distpart_ui.ui:848 #, fuzzy, no-c-format msgid "Ge&nerate HTML information page" msgstr "生成 HTML 信息页面(&H)" #: parts/distpart/distpart_ui.ui:856 #, no-c-format msgid "&User information generated by RPM" msgstr "使用 RPM 生成的信息(&U)" #: parts/distpart/distpart_ui.ui:911 #, no-c-format msgid "&Generate" msgstr "生成(&G)" #: parts/distpart/distpart_ui.ui:939 #, no-c-format msgid "Re&mote Options" msgstr "远程选项(&M)" #: parts/distpart/distpart_ui.ui:980 #, no-c-format msgid "File su&bmission list:" msgstr "文件提交列表(&B):" #: parts/distpart/distpart_ui.ui:1016 #, no-c-format msgid "+" msgstr "+" #: parts/distpart/distpart_ui.ui:1032 #, no-c-format msgid "-" msgstr "-" #: parts/distpart/distpart_ui.ui:1053 #, fuzzy, no-c-format msgid "Upload to &custom FTP site" msgstr "上传到自定义 FTP 站点" #: parts/distpart/distpart_ui.ui:1061 #, fuzzy, no-c-format msgid "Upload files to ftp.&kde.org" msgstr "将文件上传到 ftp.kde.org" #: parts/distpart/distpart_ui.ui:1086 #, fuzzy, no-c-format msgid "Sub&mit" msgstr "提交" #: parts/distpart/distpart_ui.ui:1094 #, no-c-format msgid "ftp://username:password@ftp.server.com/path/" msgstr "ftp://username:password@ftp.server.com/path/" #: parts/distpart/distpart_ui.ui:1102 #, no-c-format msgid "Reset" msgstr "重置" #: parts/distpart/distpart_ui.ui:1110 #, fuzzy, no-c-format msgid "Upload to &apps.kde.com" msgstr "上传到 apps.kde.com" #: parts/documentation/addcatalogdlgbase.ui:16 #: parts/documentation/editcatalogdlgbase.ui:19 #, no-c-format msgid "Documentation Catalog Properties" msgstr "文档编目属性" #: parts/documentation/addcatalogdlgbase.ui:43 #, no-c-format msgid "Type:" msgstr "类型:" #: parts/documentation/addcatalogdlgbase.ui:73 #, no-c-format msgid "Locatio&n:" msgstr "位置(&N):" #: parts/documentation/docglobalconfigwidgetbase.ui:34 #, no-c-format msgid "&Documentation Collections" msgstr "文档收藏(&D)" #: parts/documentation/docglobalconfigwidgetbase.ui:98 #, fuzzy, no-c-format msgid "&Rescan" msgstr "重新启动(&R)" #: parts/documentation/docglobalconfigwidgetbase.ui:127 #, no-c-format msgid "Full Text &Search" msgstr "全文本搜索(&S)" #: parts/documentation/docglobalconfigwidgetbase.ui:163 #, no-c-format msgid "htse&arch executable:" msgstr "htsearch 可执行文件(&A):" #: parts/documentation/docglobalconfigwidgetbase.ui:215 #, no-c-format msgid "htdi&g executable:" msgstr "htdig 可执行文件(&G):" #: parts/documentation/docglobalconfigwidgetbase.ui:234 #, no-c-format msgid "Database di&rectory:" msgstr "数据库目录(&R):" #: parts/documentation/docglobalconfigwidgetbase.ui:245 #, no-c-format msgid "ht&merge executable:" msgstr "htmerge 可执行文件(&M):" #: parts/documentation/docglobalconfigwidgetbase.ui:260 #, no-c-format msgid "O&ther" msgstr "其它(&T)" #: parts/documentation/docglobalconfigwidgetbase.ui:288 #, no-c-format msgid "Editor Context Menu Items" msgstr "编辑器环境菜单项" #: parts/documentation/docglobalconfigwidgetbase.ui:299 #, no-c-format msgid "&Find in documentation" msgstr "在文档中查找(&F)" #: parts/documentation/docglobalconfigwidgetbase.ui:307 #, no-c-format msgid "&Look in documentation index" msgstr "在文档索引中查找(&L)" #: parts/documentation/docglobalconfigwidgetbase.ui:315 #, no-c-format msgid "S&earch in documentation" msgstr "在文档中搜索(&E)" #: parts/documentation/docglobalconfigwidgetbase.ui:323 #, no-c-format msgid "Goto &infopage" msgstr "转至信息页(&I)" #: parts/documentation/docglobalconfigwidgetbase.ui:331 #, no-c-format msgid "Goto &manpage" msgstr "转至手册页(&M)" #: parts/documentation/docglobalconfigwidgetbase.ui:341 #, fuzzy, no-c-format msgid "Use TDevelop &Assistant to browse documentation" msgstr "使用 KDevelop 助手浏览文档(&A)" #: parts/documentation/docglobalconfigwidgetbase.ui:349 #, no-c-format msgid "Fonts && Sizes" msgstr "字体和大小" #: parts/documentation/docglobalconfigwidgetbase.ui:368 #, no-c-format msgid "Sta&ndard font:" msgstr "标准字体(&N):" #: parts/documentation/docglobalconfigwidgetbase.ui:397 #, no-c-format msgid "Fi&xed font:" msgstr "等宽字体(&X):" #: parts/documentation/docglobalconfigwidgetbase.ui:416 #, no-c-format msgid "&Zoom factor:" msgstr "缩放因子(&Z):" #: parts/documentation/docglobalconfigwidgetbase.ui:425 #, no-c-format msgid "20" msgstr "20" #: parts/documentation/docglobalconfigwidgetbase.ui:430 #, no-c-format msgid "40" msgstr "40" #: parts/documentation/docglobalconfigwidgetbase.ui:435 #, no-c-format msgid "60" msgstr "60" #: parts/documentation/docglobalconfigwidgetbase.ui:440 #, no-c-format msgid "80" msgstr "80" #: parts/documentation/docglobalconfigwidgetbase.ui:445 #, no-c-format msgid "90" msgstr "90" #: parts/documentation/docglobalconfigwidgetbase.ui:450 #, no-c-format msgid "95" msgstr "95" #: parts/documentation/docglobalconfigwidgetbase.ui:455 #, no-c-format msgid "100" msgstr "100" #: parts/documentation/docglobalconfigwidgetbase.ui:460 #, no-c-format msgid "105" msgstr "105" #: parts/documentation/docglobalconfigwidgetbase.ui:465 #, no-c-format msgid "110" msgstr "110" #: parts/documentation/docglobalconfigwidgetbase.ui:470 #, no-c-format msgid "120" msgstr "120" #: parts/documentation/docglobalconfigwidgetbase.ui:475 #, no-c-format msgid "140" msgstr "140" #: parts/documentation/docglobalconfigwidgetbase.ui:480 #, no-c-format msgid "160" msgstr "160" #: parts/documentation/docglobalconfigwidgetbase.ui:485 #, no-c-format msgid "180" msgstr "180" #: parts/documentation/docglobalconfigwidgetbase.ui:490 #, no-c-format msgid "200" msgstr "200" #: parts/documentation/docglobalconfigwidgetbase.ui:495 #, no-c-format msgid "250" msgstr "250" #: parts/documentation/docglobalconfigwidgetbase.ui:500 #, no-c-format msgid "300" msgstr "300" #: parts/documentation/docprojectconfigwidgetbase.ui:60 #, no-c-format msgid "Ca&talog location:" msgstr "编目位置(&T):" #: parts/documentation/docprojectconfigwidgetbase.ui:85 #, no-c-format msgid "C&ollection type:" msgstr "集合类型(&O):" #: parts/documentation/find_documentation_optionsbase.ui:16 #, no-c-format msgid "Find Documentation Options" msgstr "查找文档选项" #: parts/documentation/find_documentation_optionsbase.ui:109 #, no-c-format msgid "Go to first match" msgstr "转到第一个匹配" #: parts/documentation/find_documentation_optionsbase.ui:181 #, no-c-format msgid "" "You can enable and disable search\n" "sources and change their priority here." msgstr "" #: parts/documentation/find_documentationbase.ui:36 #, no-c-format msgid "Search term:" msgstr "搜索项:" #: parts/documentation/selecttopicbase.ui:16 #, no-c-format msgid "Choose Topic" msgstr "选择主题" #: parts/documentation/selecttopicbase.ui:94 #, no-c-format msgid "Choose a topic for %1:" msgstr "选择 %1 的主题:" #: parts/filecreate/fcconfigwidgetbase.ui:16 #, no-c-format msgid "New File Wizard Options" msgstr "新建文件向导选项" #: parts/filecreate/fcconfigwidgetbase.ui:34 #, fuzzy, no-c-format msgid "Pro&ject Types" msgstr "工程类型(&P)" #: parts/filecreate/fcconfigwidgetbase.ui:45 #, no-c-format msgid "Re&move Type" msgstr "删除类型(&M)" #: parts/filecreate/fcconfigwidgetbase.ui:53 #, fuzzy, no-c-format msgid "Edit T&ype..." msgstr "编辑类型(&E)..." #: parts/filecreate/fcconfigwidgetbase.ui:61 #, no-c-format msgid "New &Subtype..." msgstr "新建子类型(&S)..." #: parts/filecreate/fcconfigwidgetbase.ui:69 #, no-c-format msgid "&New Type..." msgstr "新建类型(&N)..." #: parts/filecreate/fcconfigwidgetbase.ui:205 #, fuzzy, no-c-format msgid "Ed&it Template" msgstr "编辑模板(&L)" #: parts/filecreate/fcconfigwidgetbase.ui:215 #, no-c-format msgid "Used &Global Types" msgstr "已使用的全局类型(&G)" #: parts/filecreate/fcconfigwidgetbase.ui:301 #, no-c-format msgid "Copy to Pro&ject Types" msgstr "复制到工程类型(&J)" #: parts/filecreate/fcconfigwidgetbase.ui:311 #, fuzzy, no-c-format msgid "Proje&ct Templates" msgstr "工程模板(&T)" #: parts/filecreate/fcconfigwidgetbase.ui:320 #, no-c-format msgid "Template Name" msgstr "模板名称" #: parts/filecreate/fcconfigwidgetbase.ui:347 #, no-c-format msgid "C&hange Content..." msgstr "更改内容(&H)..." #: parts/filecreate/fcconfigwidgetbase.ui:355 #, no-c-format msgid "&New Template..." msgstr "新建模板(&N)..." #: parts/filecreate/fcconfigwidgetbase.ui:371 #, no-c-format msgid "Re&move Template" msgstr "删除模板(&M)" #: parts/filecreate/fcconfigwidgetbase.ui:396 #, no-c-format msgid "&Edit Template" msgstr "编辑模板(&E)" #: parts/filecreate/fctemplateeditbase.ui:16 #, no-c-format msgid "File Template" msgstr "文件模板" #: parts/filecreate/fctemplateeditbase.ui:78 #: parts/filecreate/fctypeeditbase.ui:162 #, no-c-format msgid "Set template content from &file:" msgstr "根据文件设定模板内容(&F):" #: parts/filecreate/fctypeeditbase.ui:16 #, no-c-format msgid "File Type" msgstr "文件类型" #: parts/filecreate/fctypeeditbase.ui:44 #, no-c-format msgid "Type &extension:" msgstr "类型扩展(&E):" #: parts/filecreate/fctypeeditbase.ui:76 #, no-c-format msgid "Type &name:" msgstr "类型名称(&N):" #: parts/filecreate/fctypeeditbase.ui:108 #, no-c-format msgid "Type &description:" msgstr "类型描述(&D):" #: parts/filelist/kdevfilelist.rc:8 #, no-c-format msgid "View Sessions" msgstr "查看会话" #: parts/filelist/kdevfilelist.rc:18 src/tdevelopui.rc:187 #, fuzzy, no-c-format msgid "View Sessions Toolbar" msgstr "文件工具栏" #: parts/filelist/projectviewconfigbase.ui:27 #, fuzzy, no-c-format msgid "Display toolbar in toolview (note: change needs a restart)" msgstr "在工具视图中显示工具栏(注意:更改需要重新启动)(&Y)" #: parts/filelist/projectviewconfigbase.ui:33 #: parts/filelist/projectviewconfigbase.ui:36 #, no-c-format msgid "" "Uncheck this if you want the toolbar together with all other toolbars. You " "can disable it then" msgstr "" #: parts/filelist/projectviewconfigbase.ui:44 #, fuzzy, no-c-format msgid "Only save project files in a session" msgstr "只在视图中保存工程文件" #: parts/filelist/projectviewconfigbase.ui:50 #: parts/filelist/projectviewconfigbase.ui:53 #, no-c-format msgid "Check this if you want to ignore files that are not part of the project" msgstr "" #: parts/filelist/projectviewconfigbase.ui:61 #, no-c-format msgid "Close all open files before opening a session" msgstr "" #: parts/filelist/projectviewconfigbase.ui:67 #: parts/filelist/projectviewconfigbase.ui:70 #, no-c-format msgid "" "Check this if you want the currently open files closed before opening a " "session" msgstr "" #: parts/filelist/projectviewprojectconfigbase.ui:16 #, no-c-format msgid "Projectviews" msgstr "工程视图" #: parts/filelist/projectviewprojectconfigbase.ui:35 #, fuzzy, no-c-format msgid "Open this session after project load:" msgstr "工程装入后打开此视图:" #: parts/filelist/projectviewprojectconfigbase.ui:51 #, fuzzy, no-c-format msgid "select a session" msgstr "选择访问" #: parts/fileview/filegroupsconfigwidgetbase.ui:38 #, no-c-format msgid "&Groups in the file view and their corresponding patterns:" msgstr "文件视图里的分组和它们相应的模板(&G):" #: parts/fileview/filegroupsconfigwidgetbase.ui:47 #: parts/regexptest/regexptestdlgbase.ui:246 #, no-c-format msgid "Group" msgstr "组" #: parts/fileview/filegroupsconfigwidgetbase.ui:58 #, no-c-format msgid "Pattern" msgstr "模板" #: parts/fileview/filegroupsconfigwidgetbase.ui:112 #, no-c-format msgid "&Add Group..." msgstr "添加组(&A)..." #: parts/fileview/filegroupsconfigwidgetbase.ui:120 #, no-c-format msgid "&Edit Group..." msgstr "编辑组(&E)..." #: parts/fileview/filegroupsconfigwidgetbase.ui:128 #, no-c-format msgid "De&lete Group" msgstr "删除组(&L)" #: parts/fileview/vcscolorsconfigwidgetbase.ui:16 #, no-c-format msgid "Colors for VCS Visual Feedback" msgstr "版本控制可视化反馈信息的颜色" #: parts/fileview/vcscolorsconfigwidgetbase.ui:27 #, no-c-format msgid "Colors to Use for Version Control Feedback" msgstr "用于显示版本控制返回的颜色" #: parts/fileview/vcscolorsconfigwidgetbase.ui:46 #, no-c-format msgid "&Updated:" msgstr "已更新(&U):" #: parts/fileview/vcscolorsconfigwidgetbase.ui:65 #, no-c-format msgid "&Modified:" msgstr "已改变(&M):" #: parts/fileview/vcscolorsconfigwidgetbase.ui:84 #, no-c-format msgid "Co&nflict:" msgstr "冲突(&N):" #: parts/fileview/vcscolorsconfigwidgetbase.ui:103 #, no-c-format msgid "&Added:" msgstr "已添加(&A):" #: parts/fileview/vcscolorsconfigwidgetbase.ui:122 #, no-c-format msgid "&Sticky:" msgstr "粘滞标签(&S):" #: parts/fileview/vcscolorsconfigwidgetbase.ui:141 #, no-c-format msgid "&Needs checkout:" msgstr "需要提取(&N):" #: parts/fileview/vcscolorsconfigwidgetbase.ui:160 #, no-c-format msgid "&Needs patch:" msgstr "需要补丁(&N):" #: parts/fileview/vcscolorsconfigwidgetbase.ui:179 #, no-c-format msgid "Un&known:" msgstr "未知(&K):" #: parts/fileview/vcscolorsconfigwidgetbase.ui:198 #, no-c-format msgid "&Default:" msgstr "默认(&D):" #: parts/outputviews/filterdlg.ui:16 #, no-c-format msgid "Output Filter Settings" msgstr "输出过滤设置" #: parts/outputviews/filterdlg.ui:94 #, fuzzy, no-c-format msgid "Filter" msgstr "已过滤" #: parts/outputviews/filterdlg.ui:111 #, no-c-format msgid "Only show lines matching:" msgstr "" #: parts/outputviews/filterdlg.ui:135 #, fuzzy, no-c-format msgid "Re&gular expression" msgstr "正则表达式(&X):" #: parts/partexplorer/partexplorerformbase.ui:24 #, no-c-format msgid "PartExplorer" msgstr "PartExplorer" #: parts/partexplorer/partexplorerformbase.ui:27 #, no-c-format msgid "" "This is a front-end to TDE's TDETrader: search your TDE documentation for " "more information about TDE services and TDETrader" msgstr "这是TDE的TDETrader的前端:在TDE文档中搜索有关TDE服务和TDETrader的信息" #: parts/partexplorer/partexplorerformbase.ui:46 #, no-c-format msgid "TDE service &type:" msgstr "TDE 服务类型(&T):" #: parts/partexplorer/partexplorerformbase.ui:79 #, no-c-format msgid "&Additional constraints:" msgstr "附加限制(&A):" #: parts/partexplorer/partexplorerformbase.ui:104 #, fuzzy, no-c-format msgid "" "ConstraintsRefine your query by writing additional constraints such " "as ([X-TDevelop-Scope]='Global'))." msgstr "" "限制通过加入新的限制条件重新定义您的查询,例如([X-KDevelop-Scope]" "='Global'))。" #: parts/partexplorer/partexplorerformbase.ui:120 #, no-c-format msgid "&Results" msgstr "结果(&R)" #: parts/quickopen/quickopenbase.ui:16 #, no-c-format msgid "Quick Open" msgstr "快速打开" #: parts/quickopen/quickopenbase.ui:30 #, no-c-format msgid "[NAME]" msgstr "[名称]" #: parts/quickopen/quickopenbase.ui:41 #, no-c-format msgid "[ITEM LIST]" msgstr "[项目列表]" #: parts/quickopen/quickopenfunctionchooseformbase.ui:142 #, no-c-format msgid "Function arguments list:" msgstr "函数参数列表:" #: parts/regexptest/regexptestdlgbase.ui:16 #, no-c-format msgid "Test Regular Expression" msgstr "测试正则表达式" #: parts/regexptest/regexptestdlgbase.ui:30 #, no-c-format msgid "&Regular expression:" msgstr "正则表达式(&R):" #: parts/regexptest/regexptestdlgbase.ui:41 #, no-c-format msgid "&Test string:" msgstr "测试字符串(&T):" #: parts/regexptest/regexptestdlgbase.ui:52 #, no-c-format msgid "Enter a string which will be matched against the regular expression" msgstr "输入要和正则表达式匹配的字符串" #: parts/regexptest/regexptestdlgbase.ui:87 #, no-c-format msgid "&Insert Quoted" msgstr "加引号插入(&I)" #: parts/regexptest/regexptestdlgbase.ui:93 #, no-c-format msgid "" "Inserts the regular expression into the currently opened source code file. " "Escapes any special characters like backslash." msgstr "" "在当前打开的源代码文件中插入正则表达式。任何比如反斜杠这样的特殊字符都使用换" "码序列。" #: parts/regexptest/regexptestdlgbase.ui:124 #, no-c-format msgid "Closes the dialog" msgstr "关闭对话框" #: parts/regexptest/regexptestdlgbase.ui:134 #, no-c-format msgid "" "enter a regular expression, for example KD.*, which matches all " "strings beginning with \"KD\"" msgstr "输入一个正则表达式。例如 KD.*,它能匹配所有以“KD”开头的字符串" #: parts/regexptest/regexptestdlgbase.ui:150 #, no-c-format msgid "Regular Expression T&ype" msgstr "正则表达式类型(&Y)" #: parts/regexptest/regexptestdlgbase.ui:161 #, no-c-format msgid "&Basic POSIX syntax (used by grep)" msgstr "基本的 POSIX 语法(grep 使用它)(&B)" #: parts/regexptest/regexptestdlgbase.ui:167 #: parts/regexptest/regexptestdlgbase.ui:178 #, no-c-format msgid "A description of this syntax can be found in the grep manpage" msgstr "这个语法的说明可以在 grep 的手册中找到。" #: parts/regexptest/regexptestdlgbase.ui:175 #, no-c-format msgid "E&xtended POSIX syntax (used by egrep)" msgstr "扩展的 POSIX 语法(egrep 使用它)(&X)" #: parts/regexptest/regexptestdlgbase.ui:186 #, no-c-format msgid "&QRegExp syntax" msgstr "&QRegExp 语法" #: parts/regexptest/regexptestdlgbase.ui:189 #, no-c-format msgid "" "A description of this syntax can be found in the documentation of the " "QRegExp class" msgstr "这个语法的说明可以在 QRegExp 类的文档中找到。" #: parts/regexptest/regexptestdlgbase.ui:197 #, no-c-format msgid "QRegExp syntax (&minimal)" msgstr "QRegExp 语法(最小匹配)(&M)" #: parts/regexptest/regexptestdlgbase.ui:200 #, no-c-format msgid "" "Matches a QRegExp non-greedy. Please read the QRegExp::setMinimal " "documentation for more details." msgstr "" "用非贪婪方式匹配一个 QRegExp 正则表达式。详细信息请阅读 QRegExp::setMinimal " "的文档。" #: parts/regexptest/regexptestdlgbase.ui:208 #, no-c-format msgid "&KRegExp syntax" msgstr "&KRegExp 语法" #: parts/regexptest/regexptestdlgbase.ui:211 #, no-c-format msgid "A description of this syntax can be found in the TDE API documentation." msgstr "这个语法的说明可以在 TDE API 文档中找到。" #: parts/regexptest/regexptestdlgbase.ui:240 #, no-c-format msgid "Matched subgroups:" msgstr "匹配的子字符串组:" #: parts/regexptest/regexptestdlgbase.ui:284 #, fuzzy, no-c-format msgid "" "Shows which groups were matched. See the corresponding documentation for how " "groups are matched." msgstr "显示哪些分组被匹配。关于如何匹配分组请参见相应的文档。" #: parts/replace/replacedlg.ui:30 #, no-c-format msgid "Project Wide String Replacement" msgstr "对整个项目进行字符串替换" #: parts/replace/replacedlg.ui:80 #, no-c-format msgid "All s&ubstrings" msgstr "所有子串(&U)" #: parts/replace/replacedlg.ui:91 #, fuzzy, no-c-format msgid "Whole words onl&y" msgstr "整词匹配(&W)" #: parts/replace/replacedlg.ui:107 #, no-c-format msgid "Regular e&xpression:" msgstr "正则表达式(&X):" #: parts/replace/replacedlg.ui:110 #, no-c-format msgid "Use regexp to specify target" msgstr "用正则表达式指定目标" #: parts/replace/replacedlg.ui:121 #, fuzzy, no-c-format msgid "E&dit" msgstr "编辑器" #: parts/replace/replacedlg.ui:124 #, no-c-format msgid "Opens the regexp editor. Only enabled if installed." msgstr "打开正则表达式编辑器。只有安装后才能启用。" #: parts/replace/replacedlg.ui:139 #, no-c-format msgid "Enter the regexp here" msgstr "在此输入正则表达式" #: parts/replace/replacedlg.ui:149 #, no-c-format msgid "Target Files in Project" msgstr "工程中的目标文件" #: parts/replace/replacedlg.ui:160 #, no-c-format msgid "A&ll files" msgstr "所有文件(&L)" #: parts/replace/replacedlg.ui:166 #, no-c-format msgid "All files in the project will be considered." msgstr "将考虑工程中的所有文件。" #: parts/replace/replacedlg.ui:174 #, no-c-format msgid "&Open files only" msgstr "只有打开的文件(&O)" #: parts/replace/replacedlg.ui:177 #, no-c-format msgid "Only open project files will be considered." msgstr "只考虑已打开的工程文件。" #: parts/replace/replacedlg.ui:185 #, no-c-format msgid "Files under &path:" msgstr "如下路径中的文件(&P):" #: parts/replace/replacedlg.ui:188 #, no-c-format msgid "Only project files in this dir and its subdirs will be considered." msgstr "只考虑此目录及其子目录下的文件。" #: parts/replace/replacedlg.ui:219 #, no-c-format msgid "Expression is invalid." msgstr "表达式无效。" #: parts/replace/replacedlg.ui:244 #, fuzzy, no-c-format msgid "Fi&nd" msgstr "查找" #: parts/replace/replacedlg.ui:250 #, no-c-format msgid "Start looking for possible replacement targets." msgstr "开始查找可能替换的目标" #: parts/replace/replacedlg.ui:268 #, no-c-format msgid "Strings" msgstr "字符串" #: parts/replace/replacedlg.ui:279 #, no-c-format msgid "&Text to find:" msgstr "要查找的文本(&T):" #: parts/replace/replacedlg.ui:290 #, no-c-format msgid "Target string" msgstr "目标字符串" #: parts/replace/replacedlg.ui:298 #, no-c-format msgid "&Replacement text:" msgstr "替换文本(&R):" #: parts/replace/replacedlg.ui:309 #, no-c-format msgid "The replacement string" msgstr "替换字符串" #: parts/scripting/kdevscripting.rc:4 #, no-c-format msgid "S&cripts" msgstr "脚本(&C)" #: parts/scripting/scriptingglobalconfigbase.ui:27 #, no-c-format msgid "Search Custom Directories for Scripts" msgstr "搜索自定义目录中的脚本" #: parts/scripting/scriptingglobalconfigbase.ui:41 #, no-c-format msgid "" "NOTE These are directories to search in that are found in your TDE " "resource directories. So if you add the string \"kate/scripts\" to the list " "then KScript will look in \"$TDEDIRS/data/kate/scripts\" for scripts. This " "will allow you to get scripts in your home directory as well as system wide " "ones." msgstr "" #: parts/snippet/snippetdlg.ui:16 #, no-c-format msgid "Add Snippet" msgstr "添加片断" #: parts/snippet/snippetdlg.ui:117 #, no-c-format msgid "&Snippet:" msgstr "片断(&S):" #: parts/snippet/snippetdlg.ui:131 #, no-c-format msgid "Group:" msgstr "组:" #: parts/snippet/snippetdlg.ui:145 #, no-c-format msgid "Click here to get to know how to use variables in a snippet" msgstr "单击此处可获得如何在片断中使用变量的指示" #: parts/snippet/snippetsettingsbase.ui:16 #, no-c-format msgid "Snippet Settings" msgstr "片断设置" #: parts/snippet/snippetsettingsbase.ui:27 #, no-c-format msgid "Tooltips" msgstr "工具提示" #: parts/snippet/snippetsettingsbase.ui:38 #, no-c-format msgid "Show snippet's text in &tooltip" msgstr "在工具提示中显示片断的文本(&T)" #: parts/snippet/snippetsettingsbase.ui:44 #, no-c-format msgid "" "Decides if a tooltip should be shown containing text from the bookmarked line" msgstr "决定工具提示是否包含标记行的文本" #: parts/snippet/snippetsettingsbase.ui:82 #, no-c-format msgid "Input Method for Variables" msgstr "变量的输入方法" #: parts/snippet/snippetsettingsbase.ui:93 #, no-c-format msgid "Single dialog for each variable within a snippet" msgstr "" #: parts/snippet/snippetsettingsbase.ui:102 #, no-c-format msgid "An input dialog will be displayed for every variable within a snippet" msgstr "" #: parts/snippet/snippetsettingsbase.ui:110 #, no-c-format msgid "One dialog for all variables within a snippet" msgstr "" #: parts/snippet/snippetsettingsbase.ui:119 #, no-c-format msgid "" "A single dialog will be displayed where you can enter the values for all " "variables within a snippet" msgstr "" #: parts/snippet/snippetsettingsbase.ui:137 #, no-c-format msgid "Delimiter:" msgstr "分隔符:" #: parts/snippet/snippetsettingsbase.ui:183 #, no-c-format msgid "Automatically Open Groups" msgstr "自动打开组" #: parts/snippet/snippetsettingsbase.ui:194 #, no-c-format msgid "The group's language is the project's primary language" msgstr "" #: parts/snippet/snippetsettingsbase.ui:200 #, no-c-format msgid "" "If the group's language is the same as the project's primary language, " "the group will be automatically opened." msgstr "" #: parts/snippet/snippetsettingsbase.ui:208 #, no-c-format msgid "The group's language is supported by the project" msgstr "" #: parts/snippet/snippetsettingsbase.ui:217 #, no-c-format msgid "" "Groups having a language which is supported by the current project will " "be opened automatically.
    Even if the group's language is not the same as " "the project's primary language.
    " msgstr "" #: parts/tools/addtooldlg.ui:16 #, no-c-format msgid "Add Tool" msgstr "添加工具" #: parts/tools/addtooldlg.ui:27 parts/valgrind/dialog_widget.ui:40 #, no-c-format msgid "&Parameters:" msgstr "参数(&P):" #: parts/tools/addtooldlg.ui:38 #, no-c-format msgid "C&apture output" msgstr "捕获输出(&A)" #: parts/tools/addtooldlg.ui:41 #, no-c-format msgid "" "If this is checked, the output of the application will be shown in the " "application output view; otherwise, all output will be ignored." msgstr "" #: parts/tools/addtooldlg.ui:49 parts/valgrind/dialog_widget.ui:51 #, no-c-format msgid "&Executable:" msgstr "可执行文件(&E):" #: parts/tools/addtooldlg.ui:74 #, no-c-format msgid "&Menu text:" msgstr "菜单文本(&M):" #: parts/tools/addtooldlg.ui:85 #, no-c-format msgid "" "

    The following placeholders can be used:

    \n" "

    \n" "%D - The project directory
    \n" "%S - The current filename
    \n" "%T - The current selection
    \n" "%W - The current word under the cursor
    \n" "

    \n" "

    If any of the used placeholders cannot be evaluated (for example\n" "if you use %T but there is no current selection), the tool will not be\n" "executed.

    " msgstr "" #: parts/tools/addtooldlg.ui:102 #, no-c-format msgid "The text that appears in the Tools-Menu" msgstr "出现在工具菜单中的文本" #: parts/tools/addtooldlg.ui:159 #, no-c-format msgid "The path and name of the application to execute" msgstr "要执行的应用程序路径和名称" #: parts/tools/toolsconfigwidgetbase.ui:37 #, no-c-format msgid "&Tools Menu" msgstr "工具菜单(&T)" #: parts/tools/toolsconfigwidgetbase.ui:141 #, no-c-format msgid "&File Context Menu" msgstr "文件环境菜单(&F)" #: parts/tools/toolsconfigwidgetbase.ui:245 #, no-c-format msgid "&Directory Context Menu" msgstr "目录环境菜单(&D)" #: parts/uimode/uichooser.ui:16 #, fuzzy, no-c-format msgid "UIChooser" msgstr "用户" #: parts/uimode/uichooser.ui:38 #, no-c-format msgid "Use Tabs" msgstr "使用制表符" #: parts/uimode/uichooser.ui:41 #, no-c-format msgid "" "Some prefer not to have a tab bar and switch between documents using other " "means. Kate is one example of this." msgstr "" #: parts/uimode/uichooser.ui:52 #, fuzzy, no-c-format msgid "Al&ways" msgstr "总是" #: parts/uimode/uichooser.ui:63 #, fuzzy, no-c-format msgid "Ne&ver" msgstr "从不" #: parts/uimode/uichooser.ui:76 #, no-c-format msgid "Use Close on Hover" msgstr "" #: parts/uimode/uichooser.ui:79 #, no-c-format msgid "" "The document tab can optionally be used to close the document, by clicking " "on the tab icon." msgstr "" #: parts/uimode/uichooser.ui:121 #, no-c-format msgid "Toolview Tab Layout" msgstr "" #: parts/uimode/uichooser.ui:124 #, no-c-format msgid "" "Three different modes for the IDEAl toolview tabs. \"Text and icons\" is the " "most informative, but takes a lot of space. Those with a smaller screen will " "typically want \"Icons\"." msgstr "" #: parts/uimode/uichooser.ui:135 #, no-c-format msgid "Icons" msgstr "图标" #: parts/uimode/uichooser.ui:143 #, fuzzy, no-c-format msgid "Te&xt" msgstr "文本" #: parts/uimode/uichooser.ui:154 #, no-c-format msgid "Text and icons" msgstr "文本和图标" #: parts/uimode/uichooser.ui:164 #, no-c-format msgid "Tabbed Browsing" msgstr "标签式浏览" #: parts/uimode/uichooser.ui:167 #, no-c-format msgid "Some extra options for the document tabbar." msgstr "" #: parts/uimode/uichooser.ui:178 #, no-c-format msgid "Open &new tab after current tab" msgstr "在当前标签后打开新标签(&N)" #: parts/uimode/uichooser.ui:186 #, fuzzy, no-c-format msgid "&Show icons on document tabs" msgstr "在文档标签上显示图标" #: parts/uimode/uichooser.ui:194 #, fuzzy, no-c-format msgid "Show close &button in tab bar" msgstr "在标签栏上显示关闭按钮" #: parts/uimode/uichooser.ui:214 #, fuzzy, no-c-format msgid "Note: Changes will take effect after TDevelop is restarted" msgstr "注意:更改将会在 KDevelop 重新启动后生效" #: parts/valgrind/dialog_widget.ui:87 parts/valgrind/dialog_widget.ui:218 #, no-c-format msgid "Valgrind" msgstr "Valgrind" #: parts/valgrind/dialog_widget.ui:98 #, no-c-format msgid "Memory &leak check" msgstr "内存泄露检查(&L)" #: parts/valgrind/dialog_widget.ui:137 #, no-c-format msgid "&Show still reachable blocks" msgstr "显示仍然可用的内存块(&S)" #: parts/valgrind/dialog_widget.ui:147 parts/valgrind/dialog_widget.ui:274 #, no-c-format msgid "&Trace children" msgstr "跟踪子类(&T)" #: parts/valgrind/dialog_widget.ui:166 parts/valgrind/dialog_widget.ui:240 #, no-c-format msgid "Additional p&arameters:" msgstr "其它参数(&A):" #: parts/valgrind/dialog_widget.ui:284 #, no-c-format msgid "KCachegrind" msgstr "KCachegrind" #: parts/valgrind/dialog_widget.ui:300 #, fuzzy, no-c-format msgid "Exe&cutable:" msgstr "可执行文件:" #: parts/vcsmanager/vcsmanagerprojectconfigbase.ui:27 #, no-c-format msgid "Version control system to use for this project:" msgstr "此工程所使用的版本控制系统:" #: src/generalinfowidgetbase.ui:16 #, no-c-format msgid "General Settings" msgstr "常规设置" #: src/generalinfowidgetbase.ui:25 #, no-c-format msgid "Absolute Path" msgstr "绝对路径" #: src/generalinfowidgetbase.ui:30 #, no-c-format msgid "Relative to Project File" msgstr "相对于工程文件" #: src/generalinfowidgetbase.ui:67 #, no-c-format msgid "Project directory:" msgstr "工程目录:" #: src/generalinfowidgetbase.ui:113 #, no-c-format msgid "" "Project Version\n" "You may need to run automake & friends to update\n" "the version in all files after changing this." msgstr "" #: src/generalinfowidgetbase.ui:123 #, no-c-format msgid "" "Used in templates as $EMAIL$\n" "Placed in the AUTHORS file" msgstr "" #: src/generalinfowidgetbase.ui:132 #, no-c-format msgid "" "Used in templates as $AUTHOR$\n" "Placed in the AUTHORS file" msgstr "" #: src/generalinfowidgetbase.ui:177 #, no-c-format msgid "Where the project starts." msgstr "" #: src/generalinfowidgetbase.ui:189 #, no-c-format msgid "Please select a project directory" msgstr "请选择一个工程目录" #: src/generalinfowidgetbase.ui:197 #, no-c-format msgid "Default encoding:" msgstr "默认编码:" #: src/generalinfowidgetbase.ui:205 #, no-c-format msgid "Default encoding used when opening text files" msgstr "默认编码用于打开文本文件" #: src/generalinfowidgetbase.ui:213 #, fuzzy, no-c-format msgid "Text that stays in the project file." msgstr "无法写入工程文件。" #: src/kdevassistantui.rc:68 src/tdevelopui.rc:73 #, no-c-format msgid "Bu&ild" msgstr "构建(&I)" #: src/kdevassistantui.rc:143 src/tdevelopui.rc:157 #, no-c-format msgid "Build Toolbar" msgstr "构建工具栏" #: src/kdevassistantui.rc:159 src/tdevelopui.rc:172 #, no-c-format msgid "Extra Toolbar" msgstr "额外工具栏" #: src/mimewarningdialog.ui:24 #, no-c-format msgid "Could Not Open File" msgstr "无法打开文件" #: src/mimewarningdialog.ui:43 #, fuzzy, no-c-format msgid "TDevelop could not open" msgstr "KDevelop 无法打开" #: src/mimewarningdialog.ui:59 #, no-c-format msgid "Some URL" msgstr "" #: src/mimewarningdialog.ui:75 #, no-c-format msgid "No suitable viewer was found for the %1 mimetype." msgstr "" #: src/mimewarningdialog.ui:100 #, no-c-format msgid "What Do You Want to Do?" msgstr "" #: src/mimewarningdialog.ui:111 #, no-c-format msgid "Let TDE find a suitable program" msgstr "让 TDE 找到合适的程序" #: src/mimewarningdialog.ui:122 #, fuzzy, no-c-format msgid "Open it in TDevelop as plain text" msgstr "总是在 KDevelop 中打开为纯文本" #: src/mimewarningdialog.ui:158 #, no-c-format msgid "Always open this mimetype as text" msgstr "总是将此 MIME 类型打开为文本" #: src/pluginselectdialogbase.ui:16 #, fuzzy, no-c-format msgid "Plugin Selection" msgstr "插件动作(&P)" #: src/pluginselectdialogbase.ui:27 #, fuzzy, no-c-format msgid "Plugins:" msgstr "插件" #: src/pluginselectdialogbase.ui:51 #, no-c-format msgid "Make this the default for this profile:" msgstr "" #: src/pluginselectdialogbase.ui:59 #, fuzzy, no-c-format msgid "Save &as Default" msgstr "设为默认" #: src/profileengine/editor/addprofilewidget.ui:73 #, no-c-format msgid "&Generic name:" msgstr "通用名称(&G):" #: src/profileengine/editor/profileeditorbase.ui:16 #, fuzzy, no-c-format msgid "Profile Editor for The TDevelop Platform" msgstr "KDevelop 平台配置文件编辑器" #: src/profileengine/editor/profileeditorbase.ui:212 #, no-c-format msgid "Derived properties:" msgstr "派生属性:" #: src/profileengine/editor/profileeditorbase.ui:241 #, no-c-format msgid "Own properties:" msgstr "自有属性:" #: src/profileengine/editor/profileeditorbase.ui:258 #, no-c-format msgid "Lists of Explicitly Enabled && Disabled Plugins" msgstr "" #: src/profileengine/editor/profileeditorbase.ui:283 #, no-c-format msgid "Enabled:" msgstr "已启用:" #: src/profileengine/editor/profileeditorbase.ui:289 #: src/profileengine/editor/profileeditorbase.ui:329 #, no-c-format msgid "Plugin Name" msgstr "插件名称" #: src/profileengine/editor/profileeditorbase.ui:323 #, no-c-format msgid "Disabled:" msgstr "已禁用:" #: src/profileengine/editor/profileeditorbase.ui:430 #, no-c-format msgid "Available plugins:" msgstr "可用的插件:" #: src/profileengine/editor/profileeditorbase.ui:447 #: src/profileengine/editor/profileeditorbase.ui:527 #, no-c-format msgid "Generic Name" msgstr "通用名" #: src/profileengine/editor/profileeditorbase.ui:507 #, no-c-format msgid "List of Plugins to Be Loaded" msgstr "列出已装入的插件" #: src/settingswidget.ui:16 #, fuzzy, no-c-format msgid "Form2" msgstr "界面表单" #: src/settingswidget.ui:30 #, no-c-format msgid "Lo&ad last project on startup" msgstr "启动时载入上次的工程(&A)" #: src/settingswidget.ui:33 #, no-c-format msgid "" "Check this if you want TDevelop to load the last opened project on startup" msgstr "" #: src/settingswidget.ui:36 #, no-c-format msgid "" "Mark this checkbox if you want to continue to work with the last project you " "worked on. This will cause TDevelop to automatically load this project on " "start-up. It will usually be shown in the state you left work so you can " "readily proceed." msgstr "" #: src/settingswidget.ui:44 #, no-c-format msgid "

    Project Settings

    " msgstr "

    工程设置

    " #: src/settingswidget.ui:55 #, fuzzy, no-c-format msgid "Line wrappin&g" msgstr "自动换行(&W)" #: src/settingswidget.ui:58 #, no-c-format msgid "" "By default, TDevelop will wrap long lines around in the Messages Output View " "window" msgstr "" #: src/settingswidget.ui:61 #, no-c-format msgid "" "By default, TDevelop will wrap long lines around in the Messages Output View " "window so that valuable information will not be easily overlooked. In some " "cases this will clutter long message lists. Remove the checkbox mark if you " "do not want the lines wrap around." msgstr "" #: src/settingswidget.ui:77 #, no-c-format msgid "&Compiler output:" msgstr "编译器输出(&C):" #: src/settingswidget.ui:86 #, no-c-format msgid "Very Short" msgstr "很短" #: src/settingswidget.ui:91 #, no-c-format msgid "Short" msgstr "短" #: src/settingswidget.ui:96 #, no-c-format msgid "Long" msgstr "长" #: src/settingswidget.ui:111 #, no-c-format msgid "Choose what sort of output you want from the build process" msgstr "" #: src/settingswidget.ui:114 #, no-c-format msgid "" "TDevelop preprocesses the messages the Messages Output View window receives " "during the build processes in order to filter superfluous information. You " "can control the level of detail TDevelop will display using the dropdown box " "in this field. \n" "Very Short Displays only warnings, errors, and the filenames which " "are compiled. \n" "Short Suppresses all compiler flags and formats the output to be " "more readable. \n" "Full Displays all output messages unmodified." msgstr "" #: src/settingswidget.ui:127 #, no-c-format msgid "

    Output View Settings

    " msgstr "

    输出视图设置

    " #: src/settingswidget.ui:149 #, no-c-format msgid "Default pro&jects directory:" msgstr "默认工程目录(&J):" #: src/settingswidget.ui:163 #, fuzzy, no-c-format msgid "Set the directory where you want your projects in." msgstr "选择您的工程所使用的 Qt 版本。" #: src/settingswidget.ui:166 #, no-c-format msgid "" "By default, TDevelop uses a common parent directory for all new projects. " "Enter the absolute path of this common directory in the box or select it " "from your directory structure. TDevelop will place the any new project here " "as a subdirectory." msgstr "" #: src/settingswidget.ui:209 #, no-c-format msgid "Window &font:" msgstr "窗口字体(&F):" #: src/settingswidget.ui:261 #, no-c-format msgid "Use &TDE setting" msgstr "使用 TDE 设置(&K)" #: src/settingswidget.ui:267 #, no-c-format msgid "Use the terminal as set in KControl" msgstr "使用 KControl 中设定的终端" #: src/settingswidget.ui:270 #, no-c-format msgid "" "If checked, TDevelop will use the default terminal as set in KControl in TDE " "components, Component Chooser." msgstr "" #: src/settingswidget.ui:294 #, no-c-format msgid "&Other:" msgstr "其它(&O):" #: src/settingswidget.ui:297 #, no-c-format msgid "Set a different terminal than the TDE default one" msgstr "" #: src/settingswidget.ui:300 #, no-c-format msgid "Choose some other terminal different from the default one." msgstr "" #: src/settingswidget.ui:320 #, no-c-format msgid "

    Terminal Emulation

    " msgstr "

    终端模拟器

    " #: src/settingswidget.ui:365 #, no-c-format msgid "" "

    UI Designer Integration

    This will only be used when no project " "is opened. For the project specific setting see Project Options/C++ Specific " "and open the Qt tab.
    " msgstr "" #: src/settingswidget.ui:399 #, fuzzy, no-c-format msgid "Start TDevelop own designer embedded within TDevelop" msgstr "在 KDevelop 中启动 KDevelop 自带的设计师" #: src/settingswidget.ui:410 #, fuzzy, no-c-format msgid "Run TDevelop's &designer as a separate application" msgstr "将 KDevelop 的设计器运行为单独的应用程序(&D)" #: src/settingswidget.ui:413 #, fuzzy, no-c-format msgid "Start TDevelop own designer externally" msgstr "在外部启动 KDevelop 自带的设计师" #: src/settingswidget.ui:424 #, fuzzy, no-c-format msgid "Run &Qt Designer" msgstr "运行 Qt 设计师(&G)" #: src/settingswidget.ui:440 #, no-c-format msgid "Directory &navigation messages" msgstr "目录导航消息(&N)" #: src/settingswidget.ui:446 #, no-c-format msgid "Check this if you want to know what directory make is in" msgstr "" #: src/settingswidget.ui:449 #, no-c-format msgid "" "The make tool usually will display messages like “Entering directory”, or " "“Leaving directory” when it switches the directories it currently works in. " "As this clutters the messages list in the Messages Output View window, " "TDevelop suppresses those messages by default. Mark the checkbox if you want " "to protocol which directories make worked in." msgstr "" #: src/settingswidget.ui:497 #, fuzzy, no-c-format msgid "Force English compiler output" msgstr "完整的编译器输出" #: src/settingswidget.ui:505 #, no-c-format msgid "Use TDE language and disable \"jump-to-source\" functionality" msgstr "" #: vcs/clearcase/integrator/ccintegratordlgbase.ui:24 #: vcs/perforce/integrator/pfintegratordlgbase.ui:24 #, no-c-format msgid "No options available for this VCS." msgstr "此 CVS 无此选项。" #: vcs/cvsservice/checkoutdialogbase.ui:24 #, no-c-format msgid "CVS Server Configuration" msgstr "CVS 服务器配置" #: vcs/cvsservice/checkoutdialogbase.ui:46 #, no-c-format msgid "&Local destination directory:" msgstr "本地目标目录(&L):" #: vcs/cvsservice/checkoutdialogbase.ui:86 #, no-c-format msgid "&Server path (e.g. :pserver:slavekb@cvs.trinitydesktop.org:/home/tde):" msgstr "" "服务器路径(例如 :pserver:slavekb@cvs.trinitydesktop.org:/home/tde)(&S):" #: vcs/cvsservice/checkoutdialogbase.ui:101 #, no-c-format msgid "Select Module" msgstr "选择模块" #: vcs/cvsservice/checkoutdialogbase.ui:137 vcs/cvsservice/cvsformbase.ui:79 #: vcs/cvsservice/integrator/fetcherdlgbase.ui:113 #, no-c-format msgid "&Module:" msgstr "模块(&M):" #: vcs/cvsservice/checkoutdialogbase.ui:156 #, no-c-format msgid "&Tag/branch:" msgstr "标签/分支(&T):" #: vcs/cvsservice/checkoutdialogbase.ui:195 #, no-c-format msgid "&Prune directories" msgstr "剪除子目录(&P)" #: vcs/cvsservice/checkoutdialogbase.ui:201 #, no-c-format msgid "Creates subdirs if needed" msgstr "若有必要则建立子目录" #: vcs/cvsservice/checkoutdialogbase.ui:207 #, no-c-format msgid "Module" msgstr "模块" #: vcs/cvsservice/checkoutdialogbase.ui:218 #, no-c-format msgid "Real Path" msgstr "真实路径" #: vcs/cvsservice/checkoutdialogbase.ui:277 #, no-c-format msgid "&Fetch Modules List" msgstr "获取模块列表(&F)" #: vcs/cvsservice/checkoutdialogbase.ui:283 #, no-c-format msgid "Fetch modules list from server" msgstr "从服务器获取模块列表" #: vcs/cvsservice/checkoutdialogbase.ui:286 #, no-c-format msgid "Click to fetch modules list from server you specified" msgstr "单击从服务器获取您指定的模块列表" #: vcs/cvsservice/commitdialogbase.ui:16 #, no-c-format msgid "Commit to Repository" msgstr "提交到仓库" #: vcs/cvsservice/commitdialogbase.ui:30 #, no-c-format msgid "&Message" msgstr "消息(&M)" #: vcs/cvsservice/commitdialogbase.ui:56 #, no-c-format msgid "&Add to changelog:" msgstr "添加到变更日志(&A):" #: vcs/cvsservice/commitdialogbase.ui:67 #, fuzzy, no-c-format msgid "Change log filename path (relative to project directory)" msgstr "改变日志文件路径(相对于工程目录)" #: vcs/cvsservice/commitdialogbase.ui:70 #, fuzzy, no-c-format msgid "" "Changelog filename path
    Insert here the Changelog filename you " "wish to use so that the message is appended" msgstr "" "Changelog文件名路径
    在这里输入您希望插入消息的Changelog文件名" #: vcs/cvsservice/cvsformbase.ui:17 #, no-c-format msgid "This form allows you to create a CVS repository for your new project" msgstr "此表格让您能为新的工程创建一个 CVS 仓库" #: vcs/cvsservice/cvsformbase.ui:34 #, no-c-format msgid "Release &tag:" msgstr "发行版标签(&T):" #: vcs/cvsservice/cvsformbase.ui:45 #, no-c-format msgid "Enter the name of the repository" msgstr "输入仓库名" #: vcs/cvsservice/cvsformbase.ui:48 #, no-c-format msgid "" "CVS Repository name goes here.\n" "Most of the thime you'll just reuse the project name" msgstr "" "这里填写 CVS 仓库名。\n" "通常您只需直接使用工程名称" #: vcs/cvsservice/cvsformbase.ui:57 #: vcs/cvsservice/integrator/integratordlgbase.ui:46 #, no-c-format msgid "vendor" msgstr "制作者" #: vcs/cvsservice/cvsformbase.ui:60 #, no-c-format msgid "Enter the vendor name" msgstr "输入制作者名称" #: vcs/cvsservice/cvsformbase.ui:68 #, no-c-format msgid "&Message:" msgstr "消息(&M):" #: vcs/cvsservice/cvsformbase.ui:90 #: vcs/cvsservice/integrator/integratordlgbase.ui:176 #, no-c-format msgid "&Vendor tag:" msgstr "制作者标签(&V):" #: vcs/cvsservice/cvsformbase.ui:101 #, no-c-format msgid "new project" msgstr "新建工程" #: vcs/cvsservice/cvsformbase.ui:104 #, no-c-format msgid "Repository creation message" msgstr "仓库创建消息" #: vcs/cvsservice/cvsformbase.ui:112 #: vcs/cvsservice/integrator/integratordlgbase.ui:267 #, no-c-format msgid "start" msgstr "开始" #: vcs/cvsservice/cvsformbase.ui:115 #, no-c-format msgid "Tag that will be associated with initial state" msgstr "和初始状态相关联的标签" #: vcs/cvsservice/cvsformbase.ui:129 #, no-c-format msgid "&Server path:" msgstr "服务器路径(&S):" #: vcs/cvsservice/cvsformbase.ui:140 #, no-c-format msgid "Enter your CVS Root location" msgstr "输入您的 CVS 根路径" #: vcs/cvsservice/cvsformbase.ui:143 #, no-c-format msgid "" "CVS Root location goes here, for example:
      \n" "
    • /home/cvsroot or
    • :pserver:me@localhost:/home/cvs
    " msgstr "" "这里填写 CVS 根路径。\n" "例如 /home/cvsroot 或者 :pserver:me@localhost:/home/cvs" #: vcs/cvsservice/cvsformbase.ui:158 #, no-c-format msgid "CVS_&RSH:" msgstr "CVS_&RSH:" #: vcs/cvsservice/cvsformbase.ui:172 #, no-c-format msgid "ssh" msgstr "ssh" #: vcs/cvsservice/cvsformbase.ui:184 #, no-c-format msgid "Init &root" msgstr "初始化根路径(&R)" #: vcs/cvsservice/cvsformbase.ui:187 #, no-c-format msgid "Check if you defined a new CVS Root" msgstr "如果您指定了新的 CVS 根路径请选中此项" #: vcs/cvsservice/cvsoptionswidgetbase.ui:16 #, no-c-format msgid "CVS Options" msgstr "CVS 选项" #: vcs/cvsservice/cvsoptionswidgetbase.ui:27 #, no-c-format msgid "Common Settings" msgstr "公用选项" #: vcs/cvsservice/cvsoptionswidgetbase.ui:46 #, no-c-format msgid "&Remote shell (CVS_RSH environment variable):" msgstr "远程 shell (CVS_RSH 环境变量)(&R):" #: vcs/cvsservice/cvsoptionswidgetbase.ui:57 #, no-c-format msgid "sets the CVS_RSH variable" msgstr "设置 CVS_RSH 变量" #: vcs/cvsservice/cvsoptionswidgetbase.ui:60 #, fuzzy, no-c-format msgid "" "Set this option to \"ssh\" to use ssh as remote shell for CVS. Note that you " "need password-less login (see the ssh documentation for how to generate a " "public/private key pair) otherwise CVS will just hang forever." msgstr "" "将这个选项设为“ssh”可以使用 ssh 作为 CVS 的远程 shell。注意您需要设置无需输入" "口令的登录方式(关于如何生成公用/私有密钥对,请参见 ssh HOWTO 文档),不然 CVS " "将无法进行。" #: vcs/cvsservice/cvsoptionswidgetbase.ui:68 #, no-c-format msgid "CVS server &location:" msgstr "CVS 服务器位置(&L):" #: vcs/cvsservice/cvsoptionswidgetbase.ui:86 #, no-c-format msgid "When Updating" msgstr "更新时" #: vcs/cvsservice/cvsoptionswidgetbase.ui:97 #, no-c-format msgid "Create &new directories (if any)" msgstr "创建新的子目录(如果存在)(&N)" #: vcs/cvsservice/cvsoptionswidgetbase.ui:105 #, no-c-format msgid "&Prune empty directories" msgstr "去除空目录(&P)" #: vcs/cvsservice/cvsoptionswidgetbase.ui:113 #, no-c-format msgid "&Update subdirectories too" msgstr "更新子目录(&U)" #: vcs/cvsservice/cvsoptionswidgetbase.ui:123 #, no-c-format msgid "When Committing/Removing" msgstr "提交/删除时" #: vcs/cvsservice/cvsoptionswidgetbase.ui:134 #, no-c-format msgid "&Be recursive" msgstr "递归(&B)" #: vcs/cvsservice/cvsoptionswidgetbase.ui:144 #, no-c-format msgid "When Creating Diffs" msgstr "创建差异文件时" #: vcs/cvsservice/cvsoptionswidgetbase.ui:176 #, no-c-format msgid "Use these e&xtra options:" msgstr "使用额外选项(&X):" #: vcs/cvsservice/cvsoptionswidgetbase.ui:209 #, no-c-format msgid "Con&text lines:" msgstr "上下文行数(&T):" #: vcs/cvsservice/diffdialogbase.ui:16 #, no-c-format msgid "Choose Revisions to Diff" msgstr "选择要比较的版本" #: vcs/cvsservice/diffdialogbase.ui:30 #, no-c-format msgid "Build Difference Between" msgstr "构建如下版本间的差异" #: vcs/cvsservice/diffdialogbase.ui:49 #, no-c-format msgid "Local copy and an arbitrary &revision:" msgstr "本地文件和任一版本(&R):" #: vcs/cvsservice/diffdialogbase.ui:67 #, no-c-format msgid "&Two arbitrary revisions/tags:" msgstr "两个任意的版本/标签(&T):" #: vcs/cvsservice/diffdialogbase.ui:91 #, no-c-format msgid "Revision A:" msgstr "版本 A:" #: vcs/cvsservice/diffdialogbase.ui:105 #, no-c-format msgid "Second revision to compare (leave empty to diff against HEAD)" msgstr "要比较的第二个修订(与HEAD比较保持为空)" #: vcs/cvsservice/diffdialogbase.ui:116 #, no-c-format msgid "First revision to compare" msgstr "要比较的第一个修订" #: vcs/cvsservice/diffdialogbase.ui:132 #, no-c-format msgid "Revision B:" msgstr "版本 B:" #: vcs/cvsservice/diffdialogbase.ui:142 #, no-c-format msgid "Local cop&y and HEAD" msgstr "本地副本和 HEAD(&Y)" #: vcs/cvsservice/diffdialogbase.ui:150 #, no-c-format msgid "Local copy a&nd BASE" msgstr "本地副本和 BASE(&N)" #: vcs/cvsservice/integrator/fetcherdlgbase.ui:51 #, no-c-format msgid "&Branch tag:" msgstr "分支标签(&B):" #: vcs/cvsservice/integrator/fetcherdlgbase.ui:70 #: vcs/cvsservice/integrator/integratordlgbase.ui:242 #, no-c-format msgid "&Repository:" msgstr "仓库(&R):" #: vcs/cvsservice/integrator/fetcherdlgbase.ui:97 #, no-c-format msgid "Fetch &List" msgstr "获取列表(&L)" #: vcs/cvsservice/integrator/initdlg.ui:16 #, no-c-format msgid "Choose Repository Location" msgstr "选择仓库位置" #: vcs/cvsservice/integrator/initdlg.ui:35 #, no-c-format msgid "&Repository location:" msgstr "仓库位置(&R):" #: vcs/cvsservice/integrator/integratordlgbase.ui:27 #, no-c-format msgid "Create module in the repository" msgstr "在仓库中创建模块" #: vcs/cvsservice/integrator/integratordlgbase.ui:57 #, no-c-format msgid "&Init Local Repository..." msgstr "初始化本地仓库(&I)..." #: vcs/cvsservice/integrator/integratordlgbase.ui:90 #, no-c-format msgid "Login to &Repository..." msgstr "登录仓库(&R)..." #: vcs/cvsservice/integrator/integratordlgbase.ui:154 #, no-c-format msgid "Mo&dule:" msgstr "模块(&D):" #: vcs/cvsservice/integrator/integratordlgbase.ui:198 #, no-c-format msgid "Re&lease tag:" msgstr "发行版标签(&L):" #: vcs/cvsservice/integrator/integratordlgbase.ui:256 #, no-c-format msgid "First Import" msgstr "首次导入" #: vcs/cvsservice/kdevcvsservicepart.rc:6 vcs/perforce/kdevperforcepart.rc:6 #: vcs/subversion/kdevpart_subversion.rc:5 #, no-c-format msgid "&Version Control" msgstr "版本控制(&V)" #: vcs/cvsservice/kdevcvsservicepart.rc:9 #, no-c-format msgid "&CVS Service" msgstr "CVS 服务(&C)" #: vcs/cvsservice/releaseinputdialogbase.ui:16 #, no-c-format msgid "Update/Revert to Release/Branch/Date" msgstr "更新/返转到发行版/分支/日期" #: vcs/cvsservice/releaseinputdialogbase.ui:38 #, no-c-format msgid "Revision" msgstr "版本" #: vcs/cvsservice/releaseinputdialogbase.ui:52 #, no-c-format msgid "&Most recent from current branch" msgstr "当前分支的最新版本(&M)" #: vcs/cvsservice/releaseinputdialogbase.ui:71 #, no-c-format msgid "An arbitrary &revision/tag/branch:" msgstr "任意的版本/标签/分支(&R):" #: vcs/cvsservice/releaseinputdialogbase.ui:85 #, no-c-format msgid "Type your release name here (leave empty for HEAD)" msgstr "在这里输入您的发布名称(使用 HEAD 则留空)" #: vcs/cvsservice/releaseinputdialogbase.ui:88 #, fuzzy, no-c-format msgid "" "Fill the field with the release or branch name (e.g. make_it_cool, " "tdevelop_alpha5, ...)" msgstr "输入发布名称(例如 make_it_cool,tdevelop_alpha5,...)" #: vcs/cvsservice/releaseinputdialogbase.ui:106 #, no-c-format msgid "An arbitrary &date:" msgstr "任意的日期(&D):" #: vcs/cvsservice/releaseinputdialogbase.ui:117 #, no-c-format msgid "FIll the field with a date (e.g. 20030204)" msgstr "输入日期(例如 20030204)" #: vcs/cvsservice/releaseinputdialogbase.ui:129 #, no-c-format msgid "Additional Options" msgstr "附加选项" #: vcs/cvsservice/releaseinputdialogbase.ui:140 #, no-c-format msgid "&Enforce even if the file has been locally modified (revert)" msgstr "强迫文件一致如果在本地被修改(恢复)(&E)" #: vcs/cvsservice/tagdialogbase.ui:16 #, no-c-format msgid "Tag Files on CVS Repository" msgstr "对 CVS 仓库中的文件加标签" #: vcs/cvsservice/tagdialogbase.ui:38 #, no-c-format msgid "Tag/Branch &name:" msgstr "标签/分支名称(&N):" #: vcs/cvsservice/tagdialogbase.ui:56 #, no-c-format msgid "Tag as &branch" msgstr "标记为分支(&B)" #: vcs/cvsservice/tagdialogbase.ui:64 #, no-c-format msgid "&Force" msgstr "强制(&F)" #: vcs/perforce/kdevperforcepart.rc:9 #, no-c-format msgid "&Perforce" msgstr "&Perforce" #: vcs/subversion/commitdlgbase.ui:16 #, no-c-format msgid "Log Message" msgstr "日志消息" #: vcs/subversion/integrator/svnintegratordlgbase.ui:55 #, fuzzy, no-c-format msgid "&Do not do anything" msgstr "什么也不做" #: vcs/subversion/integrator/svnintegratordlgbase.ui:61 #: vcs/subversion/integrator/svnintegratordlgbase.ui:68 #, no-c-format msgid "" "Adds subversion menus to project.\n" "\n" "NOTE: Unless you import the project\n" "out of tdevelop, you will not be able\n" "to perform any subversion operations." msgstr "" #: vcs/subversion/integrator/svnintegratordlgbase.ui:80 #, no-c-format msgid "" "&Create a project tree and import new project into trunk, then checkout from " "the repository" msgstr "" #: vcs/subversion/integrator/svnintegratordlgbase.ui:83 #: vcs/subversion/integrator/svnintegratordlgbase.ui:90 #, no-c-format msgid "" "Creates project, imports it into the subversion\n" "repository and checks it out as a working copy.\n" "\n" "NOTE: The repository has to exist.\n" "e.g. has been created with 'svnadmin'" msgstr "" #: vcs/subversion/integrator/svnintegratordlgbase.ui:102 #, no-c-format msgid "" "Example for the url (if /home/user/subversion is the subversion " "repository):\n" "file:///home/user/subversion/mynewproject" msgstr "" #: vcs/subversion/integrator/svnintegratordlgbase.ui:122 #, no-c-format msgid "Repository:" msgstr "仓库:" #: vcs/subversion/integrator/svnintegratordlgbase.ui:133 #, no-c-format msgid "" "Subversion repository location.\n" "The repository has to exist -\n" "e.g. has been created with 'svnadmin'" msgstr "" #: vcs/subversion/integrator/svnintegratordlgbase.ui:138 #, no-c-format msgid "" "Subversion repository location. This should include the subdirectory for the " "project in the repository. The project subdirectory and further " "subdirectories will be created. \n" "\n" "So for example if you give http://localhost/svn/projectname the following " "directories will be created and the project imported into the trunk " "subdirectory:\n" "http://localhost/svn/projectname\n" "http://localhost/svn/projectname/tags\n" "http://localhost/svn/projectname/branches\n" "http://localhost/svn/projectname/trunk" msgstr "" #: vcs/subversion/kdevpart_subversion.rc:8 #, no-c-format msgid "&Subversion" msgstr "&Subversion" #: vcs/subversion/subversiondiff.ui:16 #, fuzzy, no-c-format msgid "Subversion Diff" msgstr "Subversion" #: vcs/subversion/subversionprojectwidget.ui:16 #, no-c-format msgid "New Subversion Project" msgstr "新 Subversion 工程" #: vcs/subversion/subversionprojectwidget.ui:35 #, no-c-format msgid "&Import address:" msgstr "导入地址(&I):" #: vcs/subversion/subversionprojectwidget.ui:53 #, no-c-format msgid "Create &Standard Directories (tags/trunk/branches/)?" msgstr "要创建标准目录(标签/主体/分支)吗(&S)?" #: vcs/subversion/svn_co.ui:24 #, no-c-format msgid "Subversion Module Checkout" msgstr "Subversion 模块提取" #: vcs/subversion/svn_co.ui:43 #, no-c-format msgid "Server Settings" msgstr "服务器设置" #: vcs/subversion/svn_co.ui:62 #, no-c-format msgid "Checkout &from:" msgstr "提取来源(&F):" #: vcs/subversion/svn_co.ui:96 #, no-c-format msgid "&Revision:" msgstr "版本(&R):" #: vcs/subversion/svn_co.ui:107 vcs/subversion/svn_copydlgwidget.ui:143 #: vcs/subversion/svn_mergeoptiondlgbase.ui:97 #: vcs/subversion/svn_mergeoptiondlgbase.ui:202 #, no-c-format msgid "HEAD" msgstr "头" #: vcs/subversion/svn_co.ui:131 #, no-c-format msgid "This Project has Standard &Trunk/Branches/Tags/Directories" msgstr "此工程含有标准主体/分支/标签/目录(&T)" #: vcs/subversion/svn_co.ui:186 #, no-c-format msgid "Local Directory" msgstr "本地目录" #: vcs/subversion/svn_co.ui:205 #, no-c-format msgid "C&heckout in:" msgstr "提取位置(&H):" #: vcs/subversion/svn_co.ui:239 #, no-c-format msgid "&Name of the newly created directory:" msgstr "新创建的目录名称(&N):" #: vcs/subversion/svn_commitdlgbase.ui:71 #, no-c-format msgid "Keep Locks" msgstr "" #: vcs/subversion/svn_commitdlgbase.ui:108 #, fuzzy, no-c-format msgid "Recursive" msgstr "递归(&R)" #: vcs/subversion/svn_copydlgwidget.ui:16 #, fuzzy, no-c-format msgid "Subversion Copy" msgstr "Subversion" #: vcs/subversion/svn_copydlgwidget.ui:68 #: vcs/subversion/svn_mergeoptiondlgbase.ui:27 #, fuzzy, no-c-format msgid "Destination" msgstr "描述" #: vcs/subversion/svn_copydlgwidget.ui:84 #, no-c-format msgid "Specify either the full repository URL or local working path" msgstr "" #: vcs/subversion/svn_copydlgwidget.ui:94 #, fuzzy, no-c-format msgid "Requested Local Path" msgstr "真实路径" #: vcs/subversion/svn_copydlgwidget.ui:102 #, fuzzy, no-c-format msgid "Source Revision" msgstr "版本" #: vcs/subversion/svn_copydlgwidget.ui:129 #, fuzzy, no-c-format msgid "Specify by number:" msgstr "修饰符(&P):" #: vcs/subversion/svn_copydlgwidget.ui:137 #, fuzzy, no-c-format msgid "Specify by keyword:" msgstr "修饰符(&P):" #: vcs/subversion/svn_copydlgwidget.ui:148 #: vcs/subversion/svn_mergeoptiondlgbase.ui:102 #: vcs/subversion/svn_mergeoptiondlgbase.ui:207 #, no-c-format msgid "BASE" msgstr "" #: vcs/subversion/svn_copydlgwidget.ui:153 #, no-c-format msgid "WORKING" msgstr "" #: vcs/subversion/svn_copydlgwidget.ui:197 #, no-c-format msgid "Specify by the repository URL of this item" msgstr "" #: vcs/subversion/svn_copydlgwidget.ui:205 #, no-c-format msgid "Specify by local path of this item" msgstr "" #: vcs/subversion/svn_logviewoptiondlgbase.ui:35 #, no-c-format msgid "Do not show logs before branching point" msgstr "" #: vcs/subversion/svn_logviewoptiondlgbase.ui:46 #, fuzzy, no-c-format msgid "End Revision" msgstr "版本" #: vcs/subversion/svn_logviewoptiondlgbase.ui:57 #: vcs/subversion/svn_logviewoptiondlgbase.ui:120 #, fuzzy, no-c-format msgid "&By Revision Number" msgstr "版本(&R):" #: vcs/subversion/svn_logviewoptiondlgbase.ui:65 #: vcs/subversion/svn_logviewoptiondlgbase.ui:128 #, no-c-format msgid "B&y Revision Specifier" msgstr "" #: vcs/subversion/svn_logviewoptiondlgbase.ui:96 #, fuzzy, no-c-format msgid "Start Revision" msgstr "版本" #: vcs/subversion/svn_mergeoptiondlgbase.ui:16 #, fuzzy, no-c-format msgid "Subversion Merge" msgstr "Subversion 消息" #: vcs/subversion/svn_mergeoptiondlgbase.ui:38 #, fuzzy, no-c-format msgid "Destination working path" msgstr "描述" #: vcs/subversion/svn_mergeoptiondlgbase.ui:53 #, fuzzy, no-c-format msgid "Source 1" msgstr "源文件" #: vcs/subversion/svn_mergeoptiondlgbase.ui:80 #: vcs/subversion/svn_mergeoptiondlgbase.ui:172 #, fuzzy, no-c-format msgid "Number:" msgstr "名称:" #: vcs/subversion/svn_mergeoptiondlgbase.ui:91 #: vcs/subversion/svn_mergeoptiondlgbase.ui:180 #, no-c-format msgid "Keyword:" msgstr "" #: vcs/subversion/svn_mergeoptiondlgbase.ui:107 #: vcs/subversion/svn_mergeoptiondlgbase.ui:212 #, no-c-format msgid "COMMITTED" msgstr "" #: vcs/subversion/svn_mergeoptiondlgbase.ui:112 #: vcs/subversion/svn_mergeoptiondlgbase.ui:217 #, no-c-format msgid "PREV" msgstr "" #: vcs/subversion/svn_mergeoptiondlgbase.ui:143 #: vcs/subversion/svn_mergeoptiondlgbase.ui:259 #, fuzzy, no-c-format msgid "Source URL or working path:" msgstr "源代码路径(&S):" #: vcs/subversion/svn_mergeoptiondlgbase.ui:151 #: vcs/subversion/svn_mergeoptiondlgbase.ui:196 #, fuzzy, no-c-format msgid "Specify revision as" msgstr "更改函数名称" #: vcs/subversion/svn_mergeoptiondlgbase.ui:161 #, fuzzy, no-c-format msgid "Source 2" msgstr "源文件" #: vcs/subversion/svn_mergeoptiondlgbase.ui:302 #, fuzzy, no-c-format msgid "--force (Force to delete locally modified or unversioned items.)" msgstr "强制删除(删除本地已修改/没有版本的文件)" #: vcs/subversion/svn_mergeoptiondlgbase.ui:310 #, fuzzy, no-c-format msgid "--non-recursive" msgstr "递归(&R)" #: vcs/subversion/svn_mergeoptiondlgbase.ui:318 #, no-c-format msgid "--ignore-ancestry" msgstr "" #: vcs/subversion/svn_mergeoptiondlgbase.ui:334 #, no-c-format msgid "" "--dry-run (Only receive full result notification\n" " without actually modifying working copy)" msgstr "" #: vcs/subversion/svn_switchdlgbase.ui:16 #, fuzzy, no-c-format msgid "Subversion Switch" msgstr "Subversion" #: vcs/subversion/svn_switchdlgbase.ui:27 #, no-c-format msgid "Non-recursive. (Switch its immediate children only)" msgstr "" #: vcs/subversion/svn_switchdlgbase.ui:108 #, fuzzy, no-c-format msgid "Current Repository URL" msgstr "CVS 仓库(&R):" #: vcs/subversion/svn_switchdlgbase.ui:124 #, fuzzy, no-c-format msgid "Working copy to switch" msgstr "目录:" #: vcs/subversion/svn_switchdlgbase.ui:140 #, fuzzy, no-c-format msgid "Working Mode" msgstr "目录:" #: vcs/subversion/svn_switchdlgbase.ui:151 #, fuzzy, no-c-format msgid "svn switch" msgstr "递归开关" #: vcs/subversion/svn_switchdlgbase.ui:159 #, fuzzy, no-c-format msgid "svn switch --relocation" msgstr "恢复位置(&T)" #: vcs/subversion/svn_switchdlgbase.ui:169 #, fuzzy, no-c-format msgid "New destination URL" msgstr "目的:" #: vcs/subversion/svnssltrustpromptbase.ui:16 #, no-c-format msgid "SSL Certificate Trust" msgstr "" #, fuzzy #~ msgid "Continue" #~ msgstr "继续(&C)" #, fuzzy #~ msgid "Warning" #~ msgstr "警告/错误" #, fuzzy #~ msgid "Remove" #~ msgstr "删除(&M)" #, fuzzy #~ msgid "Reload" #~ msgstr "重建文件树" #, fuzzy #~ msgid "Yes" #~ msgstr "是(&Y)" #, fuzzy #~ msgid "No" #~ msgstr "编号" #, fuzzy #~ msgid "Save" #~ msgstr "全部保存" #, fuzzy #~ msgid "&Cancel" #~ msgstr "变更日志(&H):" #, fuzzy #~ msgid "Cancel" #~ msgstr "变更日志(&H):" #, fuzzy #~ msgid "Move" #~ msgstr "移动(&M)" #, fuzzy #~ msgid "Delete" #~ msgstr " <删除>" #, fuzzy #~ msgid "Properties" #~ msgstr "属性(&P)" #, fuzzy #~ msgid "&Delete" #~ msgstr "删除行(&D)" #, fuzzy #~ msgid "&Undo" #~ msgstr "撤消(&U):%1" #, fuzzy #~ msgid "&Redo" #~ msgstr "重做(&R):%1" #, fuzzy #~ msgid "Help" #~ msgstr "编码帮助" #, fuzzy #~ msgid "&Tools" #~ msgstr "工具" #, fuzzy #~ msgid "Undo" #~ msgstr "撤消(&U):%1" #, fuzzy #~ msgid "Redo" #~ msgstr "重做(&R):%1" #, fuzzy #~ msgid "Cut" #~ msgstr "剪切(&T)" #, fuzzy #~ msgid "Copy" #~ msgstr "全部关闭" #, fuzzy #~ msgid "&Copy" #~ msgstr "添加/复制(&D)" #, fuzzy #~ msgid "Paste" #~ msgstr "粘贴菜单" #, fuzzy #~ msgid "&Paste" #~ msgstr "粘贴菜单" #, fuzzy #~ msgid "Select All" #~ msgstr "全部选中(&A)" #, fuzzy #~ msgid "&Edit" #~ msgstr "编辑(&E)..." #, fuzzy #~ msgid "&Find..." #~ msgstr "查找(&F)" #, fuzzy #~ msgid "Replace" #~ msgstr "替换(&R)" #, fuzzy #~ msgid "&Replace..." #~ msgstr "替换(&R)" #, fuzzy #~ msgid "File" #~ msgstr "文件(&F):" #, fuzzy #~ msgid "&File" #~ msgstr "文件(&F):" #, fuzzy #~ msgid "Open" #~ msgstr "Open&GL" #, fuzzy #~ msgid "&Open..." #~ msgstr "打开方式..." #, fuzzy #~ msgid "Close" #~ msgstr "关闭(&L)" #, fuzzy #~ msgid "&Close" #~ msgstr "关闭(&L)" #, fuzzy #~ msgid "&Save" #~ msgstr "另存为(&S)..." #, fuzzy #~ msgid "Save As" #~ msgstr "全部保存" #, fuzzy #~ msgid "Contents" #~ msgstr "连接" #, fuzzy #~ msgid "&Contents" #~ msgstr "连接" #, fuzzy #~ msgid "About" #~ msgstr "关于 Qt" #, fuzzy #~ msgid "&About" #~ msgstr "关于 Qt" #, fuzzy #~ msgid "Add" #~ msgstr "添加(&A)" #, fuzzy #~ msgid "Italic" #~ msgstr "斜体" #, fuzzy #~ msgid "Font" #~ msgstr "字体(&F)" #, fuzzy #~ msgid "Page" #~ msgstr "目标:%1" #, fuzzy #~ msgid "Files" #~ msgstr "文件(&F):" #, fuzzy #~ msgid "Stop" #~ msgstr "停止(&S)" #, fuzzy #~ msgid "Default" #~ msgstr "默认(&D):" #, fuzzy #~ msgid "Error" #~ msgstr "错误" #, fuzzy #~ msgid "&Start" #~ msgstr "起始地址(&S):" #, fuzzy #~ msgid "Edit" #~ msgstr "编辑器" #, fuzzy #~ msgid "Off" #~ msgstr "办公" #, fuzzy #~ msgid "Miscellaneous" #~ msgstr "杂项目标" #, fuzzy #~ msgid "Width" #~ msgstr "宽度" #, fuzzy #~ msgid "Height" #~ msgstr "高度" #, fuzzy #~ msgid "&Remove" #~ msgstr "删除(&M)" #, fuzzy #~ msgid "Bookmarks" #~ msgstr "添加书签" #, fuzzy #~ msgid "Show &Statusbar" #~ msgstr "显示状态栏" #, fuzzy #~ msgid "Show &Menubar" #~ msgstr "显示状态栏" #, fuzzy #~ msgid "&Update" #~ msgstr "更新" #, fuzzy #~ msgid "Options" #~ msgstr "选项(&P)" #, fuzzy #~ msgid "Configuration" #~ msgstr "配置:" #, fuzzy #~ msgid "&Settings" #~ msgstr "设置" #, fuzzy #~ msgid "Main Toolbar" #~ msgstr "文件工具栏" #, fuzzy #~ msgid "&Options" #~ msgstr "选项(&P)" #, fuzzy #~ msgid "&View" #~ msgstr "查看器" #, fuzzy #~ msgid "View" #~ msgstr "查看器" #~ msgid "Error compiling the regular expression." #~ msgstr "正则表达式编译错误。" #, fuzzy #~ msgid "Alt+C" #~ msgstr "Alt+1" #, fuzzy #~ msgid "Log Type" #~ msgstr "类型" #, fuzzy #~ msgid "Wor&king Copy History" #~ msgstr "目录:" #, fuzzy #~ msgid "&Repository History" #~ msgstr "仓库(&R):" #, fuzzy #~ msgid "Add New Files To Project" #~ msgstr "将选中文件加入到工程" #, fuzzy #~ msgid "" #~ "Add New Files To Project

    Adds files created outside of tdevelop " #~ "to the project." #~ msgstr "添加到工程

    添加当前文件到工程中。"