# translation of katepart.po to Chinese Traditional # traditional Chinese Translation of katepart. # Copyright (C) 2002, 2006 Free Software Foundation, Inc. # # Translator: AceLan , 2001. # Kenduest Lee , 2002. # Chao-Hsiung Liao , 2002. # Frank Weng (a.k.a. Franklin) , 2006. msgid "" msgstr "" "Project-Id-Version: katepart\n" "POT-Creation-Date: 2018-12-10 03:22+0100\n" "PO-Revision-Date: 2006-12-18 13:07+0800\n" "Last-Translator: Frank Weng (a.k.a. Franklin) \n" "Language-Team: Chinese Traditional \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #: _translatorinfo:1 part/katefactory.cpp:115 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "AceLan,Kenduest Lee,Chao-Hsiung Liao" #: _translatorinfo:2 part/katefactory.cpp:115 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "" "acelan@kde.linux.org.tw,kenduest@i18n.linux.org.tw,pesder.liao@msa.hinet.net" #: part/kateautoindent.cpp:97 part/katehighlight.cpp:3170 #: part/kateschema.cpp:1058 msgid "Normal" msgstr "一般" #: part/kateautoindent.cpp:99 msgid "C Style" msgstr "C 風格" #: part/kateautoindent.cpp:101 msgid "Python Style" msgstr "Python 風格" #: part/kateautoindent.cpp:103 msgid "XML Style" msgstr "XML 風格" #: part/kateautoindent.cpp:105 msgid "S&S C Style" msgstr "S&S C 風格" #: part/kateautoindent.cpp:107 msgid "Variable Based Indenter" msgstr "變數基礎指示器" #: part/kateautoindent.cpp:111 part/katefiletype.cpp:522 #: part/katehighlight.cpp:1192 msgid "None" msgstr "無" #: part/katebookmarks.cpp:77 msgid "Set &Bookmark" msgstr "設定書籤(&B)" #: part/katebookmarks.cpp:80 msgid "If a line has no bookmark then add one, otherwise remove it." msgstr "如果某行沒有書籤就增加一個，否則就移除它。" #: part/katebookmarks.cpp:81 msgid "Clear &Bookmark" msgstr "清除書籤(&B)" #: part/katebookmarks.cpp:84 msgid "Clear &All Bookmarks" msgstr "清除所有的書籤(&A)" #: part/katebookmarks.cpp:87 msgid "Remove all bookmarks of the current document." msgstr "移除目前文件的所有書籤。" #: part/katebookmarks.cpp:90 part/katebookmarks.cpp:242 msgid "Next Bookmark" msgstr "下個書籤" #: part/katebookmarks.cpp:93 msgid "Go to the next bookmark." msgstr "移至下一個書籤。" #: part/katebookmarks.cpp:96 part/katebookmarks.cpp:244 msgid "Previous Bookmark" msgstr "上個書籤" #: part/katebookmarks.cpp:99 msgid "Go to the previous bookmark." msgstr "移至上一個書籤。" #: part/katebookmarks.cpp:101 #, fuzzy msgid "&Bookmarks" msgstr "書籤" #: part/katebookmarks.cpp:203 msgid "&Next: %1 - \"%2\"" msgstr "下一個(&N): %1 - 「%2」" #: part/katebookmarks.cpp:210 msgid "&Previous: %1 - \"%2\"" msgstr "上一個(&P): %1 - 「%2」" #: part/katecmds.cpp:98 part/katejscript.cpp:275 part/katejscript.cpp:741 #: part/katejscript.cpp:944 msgid "Could not access view" msgstr "無法存取檢視" #: part/katecmds.cpp:151 msgid "Mode must be at least 0." msgstr "模式必須最少為 0。" #: part/katecmds.cpp:169 msgid "No such highlight '%1'" msgstr "沒有這樣的突顯「%1」" #: part/katecmds.cpp:180 msgid "Missing argument. Usage: %1 " msgstr "漏掉引數。用法：%1 " #: part/katecmds.cpp:184 msgid "Failed to convert argument '%1' to integer." msgstr "轉換引數「%1」為整數失敗。" #: part/katecmds.cpp:190 part/katecmds.cpp:196 msgid "Width must be at least 1." msgstr "寬度必須最少為 1。" #: part/katecmds.cpp:202 msgid "Column must be at least 1." msgstr "欄必須最少為 1。" #: part/katecmds.cpp:208 msgid "Line must be at least 1" msgstr "行必須最少為 1。" #: part/katecmds.cpp:210 msgid "There is not that many lines in this document" msgstr "此文件中沒有那麼多行" #: part/katecmds.cpp:232 msgid "Usage: %1 on|off|1|0|true|false" msgstr "用法：%1 on|off|1|0|true|false" #: part/katecmds.cpp:274 msgid "Bad argument '%1'. Usage: %2 on|off|1|0|true|false" msgstr "錯誤的引數「%1」。用法：%2 on|off|1|0|true|false" #: part/katecmds.cpp:279 msgid "Unknown command '%1'" msgstr "未知的指令「%1」" #: part/katecmds.cpp:498 msgid "Sorry, but Kate is not able to replace newlines, yet" msgstr "抱歉，Kate 尚無法取代 newline。" #: part/katecmds.cpp:540 #, c-format msgid "" "_n: 1 replacement done\n" "%n replacements done" msgstr "完成 %n 次取代" #: part/katedialogs.cpp:152 msgid "Automatic Indentation" msgstr "自動縮排" #: part/katedialogs.cpp:156 msgid "&Indentation mode:" msgstr "縮排模式(&I):" #: part/katedialogs.cpp:160 part/katedialogs.cpp:1131 msgid "Configure..." msgstr "設定..." #: part/katedialogs.cpp:162 msgid "Insert leading Doxygen \"*\" when typing" msgstr "輸入時開頭插入 Doxygen \"*\"" #: part/katedialogs.cpp:163 msgid "Adjust indentation of code pasted from the clipboard" msgstr "從剪貼簿中貼上源碼時調整縮排" #: part/katedialogs.cpp:165 msgid "Indentation with Spaces" msgstr "以空白縮排" #: part/katedialogs.cpp:167 msgid "Use &spaces instead of tabs to indent" msgstr "以空白鍵縮排代替 tabs(&S)" #: part/katedialogs.cpp:168 msgid "Emacs style mixed mode" msgstr "Emacs 風格混合模式" #: part/katedialogs.cpp:172 msgid "Number of spaces:" msgstr "空白數量：" #: part/katedialogs.cpp:174 msgid "Keep indent &profile" msgstr "保留縮排設定(&P)" #: part/katedialogs.cpp:175 msgid "&Keep extra spaces" msgstr "保留額外的空白(&K)" #: part/katedialogs.cpp:177 msgid "Keys to Use" msgstr "要使用的按鍵" #: part/katedialogs.cpp:178 msgid "&Tab key indents" msgstr "以跳格鍵縮排(&T)" #: part/katedialogs.cpp:179 msgid "&Backspace key indents" msgstr "以 &Backspace 鍵縮排" #: part/katedialogs.cpp:182 msgid "Tab Key Mode if Nothing Selected" msgstr "若沒有選擇就使用 Tab 按鍵模式" #: part/katedialogs.cpp:184 msgid "Insert indent &characters" msgstr "插入縮排與字元(&C)" #: part/katedialogs.cpp:185 msgid "I&nsert tab character" msgstr "插入 tab 字元(&I)" #: part/katedialogs.cpp:186 msgid "Indent current &line" msgstr "縮排目前的行(&L)" #: part/katedialogs.cpp:208 msgid "Check this if you want to indent with spaces rather than tabs." msgstr "假如你想要用空白取代 tab 的話，核取這個選項。" #: part/katedialogs.cpp:210 msgid "" "Indentations of more than the selected number of spaces will not be " "shortened." msgstr "超過所選取的空白部份的縮排將無法縮減。" #: part/katedialogs.cpp:213 msgid "" "This allows the Tab key to be used to increase the indentation level." msgstr "此選項可以讓您使用 Tab 鍵增加縮排的層級。" #: part/katedialogs.cpp:216 msgid "" "This allows the Backspace key to be used to decrease the indentation " "level." msgstr "此選項可以讓您使用 Backspace 鍵減少縮排的層級。" #: part/katedialogs.cpp:219 msgid "" "Automatically inserts a leading \"*\" while typing within a Doxygen style " "comment." msgstr "在輸入 Doxygen 風格註解時自動插入 \"*\" 開頭。" #: part/katedialogs.cpp:222 msgid "Use a mix of tab and space characters for indentation." msgstr "縮排時使用 tab 與空白字元混合。" #: part/katedialogs.cpp:224 msgid "" "If this option is selected, pasted code from the clipboard is indented. " "Triggering the undo-action removes the indentation." msgstr "" "選取此選項的話，從剪貼簿中貼上程式源碼時，會做縮排。只要復原就可以取消" "縮排動作。" #: part/katedialogs.cpp:226 msgid "The number of spaces to indent with." msgstr "用來縮排的空白鍵數量。" #: part/katedialogs.cpp:229 msgid "" "If this button is enabled, additional indenter specific options are " "available and can be configured in an extra dialog." msgstr "" "如果啟用這個按鈕，就可以使用額外的縮排指定選項並且可以在特別對話盒中設定。" #: part/katedialogs.cpp:281 msgid "Configure Indenter" msgstr "設定縮排" #: part/katedialogs.cpp:356 msgid "Text Cursor Movement" msgstr "文字游標的移動" #: part/katedialogs.cpp:358 msgid "Smart ho&me and smart end" msgstr "智慧的 home 與 end 按鍵(&M)" #: part/katedialogs.cpp:362 msgid "Wrap c&ursor" msgstr "游標自動折行(&U)" #: part/katedialogs.cpp:366 msgid "&PageUp/PageDown moves cursor" msgstr "&PageUp/PageDown 移動游標" #: part/katedialogs.cpp:372 msgid "Autocenter cursor (lines):" msgstr "自動置中游標（行）：" #: part/katedialogs.cpp:379 msgid "Selection Mode" msgstr "選擇區模式" #: part/katedialogs.cpp:383 msgid "&Normal" msgstr "一般(&N)" #: part/katedialogs.cpp:384 msgid "&Persistent" msgstr "固定式(&P)" #: part/katedialogs.cpp:389 msgid "" "Selections will be overwritten by typed text and will be lost on cursor " "movement." msgstr "選擇區會被輸入的文字所覆蓋並且會因為游標的移動而遺失。" #: part/katedialogs.cpp:392 msgid "Selections will stay even after cursor movement and typing." msgstr "即使在游標移動與輸入後選擇區仍然能夠存在。" #: part/katedialogs.cpp:395 msgid "" "Sets the number of lines to maintain visible above and below the cursor when " "possible." msgstr "設定在可能的情況下保持在游標上下方可見的行數。" #: part/katedialogs.cpp:399 msgid "" "When selected, pressing the home key will cause the cursor to skip " "whitespace and go to the start of a line's text. The same applies for the " "end key." msgstr "" "當選擇時，按下 home 按鍵會造成游標忽略空白並移動到文字行的開頭。end 按鍵也有" "類似的行為，除了是移到文字行的結尾之外。" #: part/katedialogs.cpp:404 msgid "" "When on, moving the insertion cursor using the Left and Right " "keys will go on to previous/next line at beginning/end of the line, similar " "to most editors.

When off, the insertion cursor cannot be moved left of " "the line start, but it can be moved off the line end, which can be very " "handy for programmers." msgstr "" "當開啟的時候，使用Left與Right鍵移動插入模式游標會移至上/下一行" "的行開頭/結尾，如同多數的編輯器一般。

當關閉的時候，插入模式游標不能左移至" "行的開頭，但是它可以移至行的結尾，這對程式設計師而言是很方便的。" #: part/katedialogs.cpp:410 msgid "" "Selects whether the PageUp and PageDown keys should alter the vertical " "position of the cursor relative to the top of the view." msgstr "選擇 PageUp 與 PageDown 按鍵是否應該根據檢視的頂端替換游標的垂直位置。" #: part/katedialogs.cpp:472 msgid "Tabulators" msgstr "定位點" #: part/katedialogs.cpp:474 msgid "&Insert spaces instead of tabulators" msgstr "插入空白代替定位點(&I)" #: part/katedialogs.cpp:478 msgid "&Show tabulators" msgstr "顯示定位點(&S)" #: part/katedialogs.cpp:484 msgid "Tab width:" msgstr "Tab 寬度:" #: part/katedialogs.cpp:489 msgid "Static Word Wrap" msgstr "靜態文字折行" #: part/katedialogs.cpp:491 msgid "Enable static &word wrap" msgstr "啟用靜態文字折行(&W)" #: part/katedialogs.cpp:495 msgid "&Show static word wrap marker (if applicable)" msgstr "顯示靜態文字折行標記（如果可以）(&S)" #: part/katedialogs.cpp:501 msgid "Wrap words at:" msgstr "在第..字元自動折行:" #: part/katedialogs.cpp:506 msgid "Remove &trailing spaces" msgstr "刪除多餘的空白(&T)" #: part/katedialogs.cpp:511 msgid "Auto &brackets" msgstr "自動補上右括弧(&B)" #: part/katedialogs.cpp:518 msgid "Unlimited" msgstr "無限制" #: part/katedialogs.cpp:519 msgid "Maximum undo steps:" msgstr "復原次數最大值:" #: part/katedialogs.cpp:524 msgid "Smart search t&ext from:" msgstr "智慧搜尋文字(&E):" #: part/katedialogs.cpp:527 msgid "Nowhere" msgstr "完全沒有" #: part/katedialogs.cpp:528 msgid "Selection Only" msgstr "只有選擇區" #: part/katedialogs.cpp:529 msgid "Selection, then Current Word" msgstr "選擇區，接著目前的文字" #: part/katedialogs.cpp:530 msgid "Current Word Only" msgstr "只有目前的文字" #: part/katedialogs.cpp:531 msgid "Current Word, then Selection" msgstr "目前的文字，接著選擇區" #: part/katedialogs.cpp:541 msgid "" "Automatically start a new line of text when the current line exceeds the " "length specified by the Wrap words at: option.

This option does not " "wrap existing lines of text - use the Apply Static Word Wrap option " "in the Tools menu for that purpose.

If you want lines to be " "visually wrapped instead, according to the width of the view, enable " "Dynamic Word Wrap in the View Defaults config page." msgstr "" "當目前的行超過了由 文字折行於: 選項指定的長度時自動開始以新的文字行。" "

這個選項不會影響文字中已存在的行 - 使用 工具 選單中的 套用靜態文" "字折行 選項可以達到這個目的。

如果您想要各行以 虛擬折行 取代，根" "據檢視的寬度，啟用 檢視預設值 設定頁面中的 動態文字折行。" #: part/katedialogs.cpp:549 msgid "" "If the Word Wrap option is selected this entry determines the length (in " "characters) at which the editor will automatically start a new line." msgstr "" "自動折行將會計算編輯器上的字元數， 若是到達指定的長度則會從下一行開始。" #: part/katedialogs.cpp:552 msgid "" "When the user types a left bracket ([,(, or {) KateView automatically enters " "the right bracket (}, ), or ]) to the right of the cursor." msgstr "" "當使用者輸入左括號([,(, 或 {)， KateView將會在游標的右邊自動補上右括號(},), " "或 ])。" #: part/katedialogs.cpp:555 msgid "" "The editor will display a symbol to indicate the presence of a tab in the " "text." msgstr "編輯器將會在文件中顯示一個符號來代表 tab 鍵" #: part/katedialogs.cpp:559 msgid "" "Sets the number of undo/redo steps to record. More steps uses more memory." msgstr "設定要記錄 復原/重作 的次數。次數越多記憶體使用量也就越多。" #: part/katedialogs.cpp:562 msgid "" "This determines where KateView will get the search text from (this will be " "automatically entered into the Find Text dialog):

  • Nowhere: Don't guess the search text.
  • Selection Only: Use the " "current text selection, if available.
  • Selection, then Current " "Word: Use the current selection if available, otherwise use the current " "word.
  • Current Word Only: Use the word that the cursor is " "currently resting on, if available.
  • Current Word, then Selection:" " Use the current word if available, otherwise use the current selection." "
Note that, in all the above modes, if a search string has not been " "or cannot be determined, then the Find Text Dialog will fall back to the " "last search text." msgstr "" "這裡決定 KateView 要從哪裏開始搜尋文字（這會被自動輸入到搜尋文字對話盒）：" "
  • 完全沒有： 不猜測搜尋的文字。
  • 只有選擇區： " "如果可以，使用目前的文字選擇區。
  • 選擇區，接著目前的文字： 如果" "可以就使用目前的選擇區，否則使用目前的文字。
  • 只有目前的文字： " "如果可以，是用游標目前所處的文字。
  • 目前的文字，接著選擇區： 如" "果可以使用目前的文字，否則使用目前的選擇區。
請注意，在上面所有的模" "式中，如果搜尋字串尚未或無法決定，尋找文字對話盒將會退回到上次搜尋的文字。" #: part/katedialogs.cpp:587 msgid "" "If this is enabled, the editor will calculate the number of spaces up to the " "next tab position as defined by the tab width, and insert that number of " "spaces instead of a TAB character." msgstr "" "如果啟用此項，編輯器將會計算達到定義的 tab 寬度前的空格數目，並插入相對數量的" "空格以代替 TAB 字元。" #: part/katedialogs.cpp:591 msgid "" "If this is enabled, the editor will remove any trailing whitespace on lines " "when they are left by the insertion cursor." msgstr "如果啟用此項，編輯器將會移除行中由插入游標所遺留的空白。" #: part/katedialogs.cpp:594 msgid "" "

If this option is checked, a vertical line will be drawn at the word wrap " "column as defined in the Editing properties.

Note that " "the word wrap marker is only drawn if you use a fixed pitch font." msgstr "" "

如果核取此選項，一條垂直線會出現在文字折行處（於 編輯 屬" "性中定義）。

注意文字折行標記只會在您使用固定字型時出現。" #: part/katedialogs.cpp:650 msgid "Word Wrap" msgstr "自動折行" #: part/katedialogs.cpp:652 msgid "&Dynamic word wrap" msgstr "動態文字折行(&D)" #: part/katedialogs.cpp:655 msgid "Dynamic word wrap indicators (if applicable):" msgstr "顯示動態文字折行指示器（如果可以）:" #: part/katedialogs.cpp:657 #, fuzzy msgid "Off" msgstr "關閉(&O)" #: part/katedialogs.cpp:658 msgid "Follow Line Numbers" msgstr "跟隨行號" #: part/katedialogs.cpp:659 msgid "Always On" msgstr "永遠開啟" #: part/katedialogs.cpp:663 msgid "Vertically align dynamically wrapped lines to indentation depth:" msgstr "垂直對齊動態折行至縮排深度：" #: part/katedialogs.cpp:666 #, no-c-format msgid "% of View Width" msgstr "% 的檢視寬度" #: part/katedialogs.cpp:667 msgid "Disabled" msgstr "已停用" #: part/katedialogs.cpp:671 msgid "Code Folding" msgstr "程式碼摺疊" #: part/katedialogs.cpp:673 msgid "Show &folding markers (if available)" msgstr "顯示摺疊記號（如果可以）(&F)" #: part/katedialogs.cpp:674 msgid "Collapse toplevel folding nodes" msgstr "摺疊最上層的節點" #: part/katedialogs.cpp:679 msgid "Borders" msgstr "框線" #: part/katedialogs.cpp:681 msgid "Show &icon border" msgstr "顯示圖示邊框(&I)" #: part/katedialogs.cpp:682 msgid "Show &line numbers" msgstr "顯示行號(&L)" #: part/katedialogs.cpp:683 msgid "Show &scrollbar marks" msgstr "顯示捲動軸標記(&S)" #: part/katedialogs.cpp:687 msgid "Sort Bookmarks Menu" msgstr "排序書籤選單" #: part/katedialogs.cpp:689 msgid "By &position" msgstr "依位置(&P)" #: part/katedialogs.cpp:690 msgid "By c&reation" msgstr "依建立日期(&R)" #: part/katedialogs.cpp:694 msgid "Show indentation lines" msgstr "顯示縮排行" #: part/katedialogs.cpp:701 part/kateview.cpp:365 msgid "" "If this option is checked, the text lines will be wrapped at the view border " "on the screen." msgstr "如果核取此選項，文字會根據螢幕上視窗寬度來折行。" #: part/katedialogs.cpp:703 part/kateview.cpp:368 msgid "Choose when the Dynamic Word Wrap Indicators should be displayed" msgstr "選擇何時要顯示動態文字折行指示器" #: part/katedialogs.cpp:708 msgid "" "

Enables the start of dynamically wrapped lines to be aligned vertically " "to the indentation level of the first line. This can help to make code and " "markup more readable.

Additionally, this allows you to set a maximum " "width of the screen, as a percentage, after which dynamically wrapped lines " "will no longer be vertically aligned. For example, at 50%, lines whose " "indentation levels are deeper than 50% of the width of the screen will not " "have vertical alignment applied to subsequent wrapped lines.

" msgstr "" "

啟用要與縮排層級的第一行垂直對齊動態文字折行。這樣可以協助讓程式碼與標記更" "加容易閱讀。

另外，這也可以讓您使用百分比設定螢幕的最大寬度，這樣一來動" "態文字折行就不會再進行垂直對齊。例如，在 50% 時，縮排層級深度大於螢幕寬度的 " "50% 的行進行文字折行時將不會有垂直對齊。

" #: part/katedialogs.cpp:717 msgid "" "If this option is checked, every new view will display line numbers on the " "left hand side." msgstr "如果核取此選項，每個新的檢視會在左手邊顯示行的編號。" #: part/katedialogs.cpp:720 msgid "" "If this option is checked, every new view will display an icon border on the " "left hand side.

The icon border shows bookmark signs, for instance." msgstr "" "如果核取此選項，每個新的檢視會在左手邊顯示圖示邊框。

例如，圖示邊框顯" "示書籤記號。" #: part/katedialogs.cpp:724 msgid "" "If this option is checked, every new view will show marks on the vertical " "scrollbar.

These marks will, for instance, show bookmarks." msgstr "" "如果核取此選項，每個新的檢視會在垂直捲動軸顯示標記。

這些標記會，例" "如，顯示書籤記號。" #: part/katedialogs.cpp:728 msgid "" "If this option is checked, every new view will display marks for code " "folding, if code folding is available." msgstr "" "如果核取此選項，而程式碼摺疊也可以使用時。每個新的檢視會在左手邊顯示程式碼摺" "疊標記。" #: part/katedialogs.cpp:731 msgid "" "Choose how the bookmarks should be ordered in the Bookmarks menu." msgstr "選擇在書籤選單中的書籤要如何排序。" #: part/katedialogs.cpp:733 msgid "The bookmarks will be ordered by the line numbers they are placed at." msgstr "書籤會根據它們設置的行數來排序。" #: part/katedialogs.cpp:735 msgid "" "Each new bookmark will be added to the bottom, independently from where it " "is placed in the document." msgstr "每個新的書籤會新增至底部，跟它在文件中的位置無關。" #: part/katedialogs.cpp:738 msgid "" "If this is enabled, the editor will display vertical lines to help identify " "indent lines." msgstr "如果啟用此項，編輯器將會顯示垂直線以協助辨識縮排的行。" #: part/katedialogs.cpp:854 msgid "File Format" msgstr "檔案格式" #: part/katedialogs.cpp:858 msgid "&Encoding:" msgstr "編碼(&E):" #: part/katedialogs.cpp:863 msgid "End &of line:" msgstr "行的結尾(&O):" #: part/katedialogs.cpp:867 msgid "&Automatic end of line detection" msgstr "自動偵測行尾(&A)" #: part/katedialogs.cpp:869 msgid "UNIX" msgstr "UNIX" #: part/katedialogs.cpp:870 msgid "DOS/Windows" msgstr "DOS/Windows" #: part/katedialogs.cpp:871 msgid "Macintosh" msgstr "Macintosh" #: part/katedialogs.cpp:873 msgid "Memory Usage" msgstr "記憶體用量" #: part/katedialogs.cpp:878 msgid "Maximum loaded &blocks per file:" msgstr "每個檔案最大載入區塊(&B):" #: part/katedialogs.cpp:884 msgid "Automatic Cleanups on Load/Save" msgstr "載入/儲存時自動清除" #: part/katedialogs.cpp:887 msgid "Re&move trailing spaces" msgstr "刪除多餘的空白(&M)" #: part/katedialogs.cpp:890 msgid "Folder Config File" msgstr "資料夾設定檔" #: part/katedialogs.cpp:895 msgid "Do not use config file" msgstr "不要使用設定檔案" #: part/katedialogs.cpp:896 msgid "Se&arch depth for config file:" msgstr "資料檔案搜尋深度(&A):" #: part/katedialogs.cpp:898 msgid "Backup on Save" msgstr "儲存時備份" #: part/katedialogs.cpp:900 msgid "&Local files" msgstr "本地端檔案(&L)" #: part/katedialogs.cpp:901 msgid "&Remote files" msgstr "遠端檔案(&R)" #: part/katedialogs.cpp:904 msgid "&Prefix:" msgstr "前綴(&P):" #: part/katedialogs.cpp:909 msgid "&Suffix:" msgstr "後綴(&S):" #: part/katedialogs.cpp:916 msgid "" "The editor will automatically eliminate extra spaces at the ends of lines of " "text while loading/saving the file." msgstr "當載入/儲存檔案時，編輯器會自動刪除行尾多餘的空白。" #: part/katedialogs.cpp:919 msgid "" "

Backing up on save will cause Kate to copy the disk file to '<" "prefix><filename><suffix>' before saving changes.

The " "suffix defaults to ~ and prefix is empty by default" msgstr "" "

儲存時備份會使 Kate 在儲存變更之前將磁碟檔案複製為 '<prefix><" "filename><suffix>' 。

預設前綴為 ~ 而預設後綴為空" "白" #: part/katedialogs.cpp:923 msgid "" "Check this if you want the editor to autodetect the end of line type.The " "first found end of line type will be used for the whole file." msgstr "" "如果您希望編輯器自動偵測行尾類型請核取此項。第一個找到的行尾類型將被用在整個" "檔案。" #: part/katedialogs.cpp:926 msgid "Check this if you want backups of local files when saving" msgstr "如果您希望在儲存時備份本地檔案請核取此項" #: part/katedialogs.cpp:928 msgid "Check this if you want backups of remote files when saving" msgstr "如果您希望在儲存時備份遠端檔案請核取此項" #: part/katedialogs.cpp:930 msgid "Enter the prefix to prepend to the backup file names" msgstr "輸入準備給備份檔案名稱使用的前綴" #: part/katedialogs.cpp:932 msgid "Enter the suffix to add to the backup file names" msgstr "輸入準備加入備份檔案名稱的後綴" #: part/katedialogs.cpp:934 msgid "" "The editor will search the given number of folder levels upwards for ." "kateconfig file and load the settings line from it." msgstr "編輯器將向上搜尋所給資料夾層級數的 .kateconfig 檔案並從其載入設定行。" #: part/katedialogs.cpp:937 msgid "" "The editor will load given number of blocks (of around 2048 lines) of text " "into memory; if the filesize is bigger than this the other blocks are " "swapped to disk and loaded transparently as-needed.
This can cause " "little delays while navigating in the document; a larger block count " "increases the editing speed at the cost of memory.
For normal usage, " "just choose the highest possible block count: limit it only if you have " "problems with the memory usage." msgstr "" "編輯器將從文字中載入所給數目的區塊（約 2048 行）到記憶體中；如果檔案大小超過" "這個大小其他的區塊會暫存於磁碟中並依需要載入。
這會造成在文件中閱覽時有些" "許延遲；載入較多的區塊會增加編輯的速度並花費更多記憶體。
在一般的用途，只" "要選擇最大可能區塊：只有在您有記憶體使用量上的問題時才限制它。" #: part/katedialogs.cpp:976 msgid "" "You did not provide a backup suffix or prefix. Using default suffix: '~'" msgstr "你沒有提供備份的後綴或前綴。使用預設後綴：'~'" #: part/katedialogs.cpp:977 msgid "No Backup Suffix or Prefix" msgstr "沒有備份後綴和前綴" #: part/katedialogs.cpp:1013 msgid "TDE Default" msgstr "TDE 預設值" #: part/katedialogs.cpp:1115 part/katedialogs.cpp:1446 msgid "Name" msgstr "名稱" #: part/katedialogs.cpp:1116 part/katehighlight.cpp:3178 msgid "Comment" msgstr "註解" #: part/katedialogs.cpp:1212 #, c-format msgid "Configure %1" msgstr "設定 %1" #: part/katedialogs.cpp:1266 part/kateschema.cpp:689 msgid "H&ighlight:" msgstr "突顯(&I):" #: part/katedialogs.cpp:1279 #, fuzzy msgid "Information" msgstr "縮排" #: part/katedialogs.cpp:1284 msgid "Author:" msgstr "作者:" #: part/katedialogs.cpp:1290 msgid "License:" msgstr "授權:" #: part/katedialogs.cpp:1293 part/katefiletype.cpp:285 #: part/katefiletype.cpp:485 #, fuzzy msgid "Properties" msgstr "方塊屬性" #: part/katedialogs.cpp:1298 part/katefiletype.cpp:304 msgid "File e&xtensions:" msgstr "延伸檔名(&X):" #: part/katedialogs.cpp:1303 part/katefiletype.cpp:308 #: plugins/autobookmarker/autobookmarker.cpp:323 msgid "MIME &types:" msgstr "MIME 類型(&T):" #: part/katedialogs.cpp:1308 part/katefiletype.cpp:317 msgid "Prio&rity:" msgstr "優先權(&R):" #: part/katedialogs.cpp:1323 msgid "Do&wnload..." msgstr "下載(&W)..." #: part/katedialogs.cpp:1331 msgid "" "Choose a Syntax Highlight mode from this list to view its " "properties below." msgstr "從這個清單選擇語法突顯模式以檢視它的屬性。" #: part/katedialogs.cpp:1334 msgid "" "The list of file extensions used to determine which files to highlight using " "the current syntax highlight mode." msgstr "延伸檔名清單是用來決定哪些檔案要使用目前的語法突顯模式來突顯。" #: part/katedialogs.cpp:1337 msgid "" "The list of Mime Types used to determine which files to highlight using the " "current highlight mode.

Click the wizard button on the left of the entry " "field to display the MimeType selection dialog." msgstr "" "MIME 類型清單是用來決定哪些檔案要使用目前的語法突顯模式來突顯。

按下項目欄" "位左方的精靈按鈕以顯示 MIME 類型選擇對話盒。" #: part/katedialogs.cpp:1341 msgid "" "Display a dialog with a list of all available mime types to choose from." "

The File Extensions entry will automatically be edited " "as well." msgstr "" "顯示含有所有可用 MIME 類型清單以供選擇的對話盒。

延伸檔名" "項目也會自動被編輯。" #: part/katedialogs.cpp:1345 msgid "" "Click this button to download new or updated syntax highlight descriptions " "from the Kate website." msgstr "按下這個按鈕以自 Kate 網站下載新的或更新過的語法突顯描述。" #: part/katedialogs.cpp:1423 msgid "" "Select the MimeTypes you want highlighted using the '%1' syntax highlight " "rules.\n" "Please note that this will automatically edit the associated file extensions " "as well." msgstr "" "選擇您想要使用「%1」語法突顯規則來突顯的 MIME 類型。\n" "請注意這樣也會自動編輯關連的延伸檔名。" #: part/katedialogs.cpp:1425 part/katefiletype.cpp:506 #: plugins/autobookmarker/autobookmarker.cpp:366 msgid "Select Mime Types" msgstr "選擇 MIME 類型" #: part/katedialogs.cpp:1438 msgid "Highlight Download" msgstr "突顯下載" #: part/katedialogs.cpp:1438 msgid "&Install" msgstr "安裝(&I)" #: part/katedialogs.cpp:1443 msgid "Select the syntax highlighting files you want to update:" msgstr "選擇你想要更新的語法突顯檔案：" #: part/katedialogs.cpp:1447 msgid "Installed" msgstr "已安裝" #: part/katedialogs.cpp:1448 msgid "Latest" msgstr "最新" #: part/katedialogs.cpp:1452 msgid "Note: New versions are selected automatically." msgstr "注意：新的版本會自動被選擇。" #: part/katedialogs.cpp:1547 msgid "Go to Line" msgstr "移至某行" #: part/katedialogs.cpp:1557 msgid "&Go to line:" msgstr "移至某行(&G):" #: part/katedialogs.cpp:1583 msgid "File Was Deleted on Disk" msgstr "磁碟上的檔案已刪除" #: part/katedialogs.cpp:1584 msgid "&Save File As..." msgstr "儲存檔案為(&S)..." #: part/katedialogs.cpp:1585 msgid "Lets you select a location and save the file again." msgstr "讓您選擇一個位置並再次儲存檔案。" #: part/katedialogs.cpp:1587 msgid "File Changed on Disk" msgstr "磁碟上的檔案已改變" #: part/katedialogs.cpp:1588 part/katedocument.cpp:4403 msgid "&Reload File" msgstr "重新載入檔案(&R)" #: part/katedialogs.cpp:1589 msgid "" "Reload the file from disk. If you have unsaved changes, they will be lost." msgstr "自磁碟重新載入檔案。如果您有未儲存的變更，它們將會遺失。" #: part/katedialogs.cpp:1594 msgid "&Ignore" msgstr "忽略(&I)" #: part/katedialogs.cpp:1597 msgid "Ignore the changes. You will not be prompted again." msgstr "忽略這些變更。您將不會再次被提示。" #: part/katedialogs.cpp:1598 msgid "" "Do nothing. Next time you focus the file, or try to save it or close it, you " "will be prompted again." msgstr "" "不做任何事。下一次您將焦點移到這個檔案，或嘗試儲存它、關閉它時，您將會被再次" "提示。" #: part/katedialogs.cpp:1610 part/katedocument.cpp:4402 msgid "What do you want to do?" msgstr "您想要做什麼？" #: part/katedialogs.cpp:1616 msgid "&View Difference" msgstr "檢視不同之處(&V)" #: part/katedialogs.cpp:1621 msgid "" "Calculates the difference between the editor contents and the disk file " "using diff(1) and opens the diff file with the default application for that." msgstr "" "使用 diff(1) 計算編輯器內容與磁碟檔案之間的差異，並以預設的應用程式開啟 diff " "檔案。" #: part/katedialogs.cpp:1625 msgid "Overwrite" msgstr "覆寫" #: part/katedialogs.cpp:1626 msgid "Overwrite the disk file with the editor content." msgstr "以編輯器內容覆蓋磁碟檔案" #: part/katedialogs.cpp:1694 msgid "" "The diff command failed. Please make sure that diff(1) is installed and in " "your PATH." msgstr "diff 指令失敗。請確定 diff(1) 已安裝於您的 PATH。" #: part/katedialogs.cpp:1696 msgid "Error Creating Diff" msgstr "建立 Diff 發生錯誤" #: part/katedialogs.cpp:1711 msgid "" "Ignoring means that you will not be warned again (unless the disk file " "changes once more): if you save the document, you will overwrite the file on " "disk; if you do not save then the disk file (if present) is what you have." msgstr "" "忽略代表您將不會再次被警告（除非磁碟檔案再次變更）：如果您儲存該文件，您將會" "覆蓋磁碟上的檔案；如果您不儲存那麼磁碟檔案（如果還在）就會保持原樣。" #: part/katedialogs.cpp:1715 msgid "You Are on Your Own" msgstr "靠您自己" #: part/katedocument.cpp:431 part/katedocument.cpp:472 msgid "Appearance" msgstr "" #: part/katedocument.cpp:434 msgid "Fonts & Colors" msgstr "字型 & 顏色" #: part/katedocument.cpp:437 msgid "Cursor & Selection" msgstr "游標 & 選擇區" #: part/katedocument.cpp:440 msgid "Editing" msgstr "編輯" #: part/katedocument.cpp:443 msgid "Indentation" msgstr "縮排" #: part/katedocument.cpp:446 msgid "Open/Save" msgstr "開啟/儲存" #: part/katedocument.cpp:449 msgid "Highlighting" msgstr "突顯" #: part/katedocument.cpp:452 msgid "Filetypes" msgstr "檔案類型" #: part/katedocument.cpp:455 msgid "Shortcuts" msgstr "快速鍵" #: part/katedocument.cpp:458 msgid "Plugins" msgstr "外掛程式" #: part/katedocument.cpp:475 msgid "Font & Color Schemas" msgstr "字型 & 色彩基模" #: part/katedocument.cpp:478 msgid "Cursor & Selection Behavior" msgstr "游標 & 選取行為" #: part/katedocument.cpp:481 msgid "Editing Options" msgstr "編輯選項" #: part/katedocument.cpp:484 msgid "Indentation Rules" msgstr "縮排規則" #: part/katedocument.cpp:487 msgid "File Opening & Saving" msgstr "檔案的開啟 & 儲存" #: part/katedocument.cpp:490 msgid "Highlighting Rules" msgstr "突顯的規則" #: part/katedocument.cpp:493 msgid "Filetype Specific Settings" msgstr "指定檔案類型設定值" #: part/katedocument.cpp:496 msgid "Shortcuts Configuration" msgstr "快速鍵組態" #: part/katedocument.cpp:499 msgid "Plugin Manager" msgstr "外掛程式管理員" #: part/katedocument.cpp:1984 #, fuzzy msgid "Configure" msgstr "設定..." #: part/katedocument.cpp:2483 msgid "" "The file %1 could not be loaded completely, as there is not enough temporary " "disk storage for it." msgstr "無法完整的載入檔案 %1 ，因為已經沒有可供它使用的暫存磁碟空間。" #: part/katedocument.cpp:2485 msgid "" "The file %1 could not be loaded, as it was not possible to read from it.\n" "\n" "Check if you have read access to this file." msgstr "" "無法載入檔案 %1 ，因為它是無法被您讀取的。\n" "\n" "請檢查您是否有這個檔案的讀取權限。" #: part/katedocument.cpp:2495 part/katedocument.cpp:2561 msgid "The file %1 is a binary, saving it will result in a corrupt file." msgstr "檔案 %1 是二元檔，儲存它可能會產生破損的檔案。" #: part/katedocument.cpp:2496 msgid "Binary File Opened" msgstr "開啟了二進位檔案" #: part/katedocument.cpp:2554 msgid "" "This file could not be loaded correctly due to lack of temporary disk space. " "Saving it could cause data loss.\n" "\n" "Do you really want to save it?" msgstr "" "由於缺乏暫存磁碟空間故無法正確的載入這個檔案。儲存它會造成資料流失。\n" "\n" "您確定要儲存它？" #: part/katedocument.cpp:2554 part/katedocument.cpp:2581 #: part/katedocument.cpp:2592 part/katedocument.cpp:2757 msgid "Possible Data Loss" msgstr "可能會遺失資料" #: part/katedocument.cpp:2554 part/katedocument.cpp:2563 #: part/katedocument.cpp:2575 part/katedocument.cpp:2581 #: part/katedocument.cpp:2592 msgid "Save Nevertheless" msgstr "儲存" #: part/katedocument.cpp:2562 msgid "Trying to Save Binary File" msgstr "嘗試儲存二元檔" #: part/katedocument.cpp:2575 msgid "" "Do you really want to save this unmodified file? You could overwrite changed " "data in the file on disk." msgstr "您確定要儲存這個未修改的檔案？您可能會覆蓋磁碟上檔案裡已變更的資料。" #: part/katedocument.cpp:2575 msgid "Trying to Save Unmodified File" msgstr "嘗試儲存未更改檔案" #: part/katedocument.cpp:2581 msgid "" "Do you really want to save this file? Both your open file and the file on " "disk were changed. There could be some data lost." msgstr "" "您確定要儲存這個檔案？您所開啟的檔案與磁碟上的檔案都已變更。可能會有某些資料" "遺失。" #: part/katedocument.cpp:2592 msgid "" "The selected encoding cannot encode every unicode character in this " "document. Do you really want to save it? There could be some data lost." msgstr "" "所選的編碼無法轉換這個文件中的每一個 unicode 字元。您確定要儲存它？可能會有某" "些資料遺失。" #: part/katedocument.cpp:2643 msgid "" "The document could not be saved, as it was not possible to write to %1.\n" "\n" "Check that you have write access to this file or that enough disk space is " "available." msgstr "" "無法儲存該文件，因為無法寫入 %1 。\n" "\n" "請檢查您是否有此檔案的寫入權限或具有足夠的磁碟空間。" #: part/katedocument.cpp:2756 msgid "Do you really want to continue to close this file? Data loss may occur." msgstr "您確定要繼續關閉這個檔案？可能發生資料的遺失。" #: part/katedocument.cpp:2757 msgid "Close Nevertheless" msgstr "關閉" #: part/katedocument.cpp:4300 msgid "Untitled" msgstr "" #: part/katedocument.cpp:4331 part/katedocument.cpp:5073 part/kateview.cpp:868 msgid "Save File" msgstr "儲存檔案" #: part/katedocument.cpp:4340 msgid "Save failed" msgstr "儲存失敗" #: part/katedocument.cpp:4403 msgid "File Was Changed on Disk" msgstr "磁碟上的檔案改變" #: part/katedocument.cpp:4403 msgid "&Ignore Changes" msgstr "忽略改變(&I)" #: part/katedocument.cpp:4981 msgid "The file '%1' was modified by another program." msgstr "檔案「%1」已被另一個程式修改了。" #: part/katedocument.cpp:4984 msgid "The file '%1' was created by another program." msgstr "檔案「%1」已被另一個程式建立了。" #: part/katedocument.cpp:4987 msgid "The file '%1' was deleted by another program." msgstr "檔案「%1」已被另一個程式刪除了。" #: part/katedocument.cpp:5101 part/kateview.cpp:895 msgid "" "A file named \"%1\" already exists. Are you sure you want to overwrite it?" msgstr "已存在以「%1」為名的檔案。您確定要覆寫它嗎？" #: part/katedocument.cpp:5103 part/kateview.cpp:896 msgid "Overwrite File?" msgstr "覆寫檔案？" #: part/katedocument.cpp:5104 part/kateview.cpp:897 msgid "&Overwrite" msgstr "覆寫(&O)" #: part/katefactory.cpp:70 msgid "Kate Part" msgstr "Kate Part" #: part/katefactory.cpp:71 msgid "Embeddable editor component" msgstr "可嵌入編輯器元件" #: part/katefactory.cpp:72 msgid "(c) 2000-2004 The Kate Authors" msgstr "(c) 2000-2004 Kate 作者群" #: part/katefactory.cpp:83 msgid "Maintainer" msgstr "維護者" #: part/katefactory.cpp:84 part/katefactory.cpp:85 part/katefactory.cpp:86 #: part/katefactory.cpp:91 msgid "Core Developer" msgstr "核心發展者" #: part/katefactory.cpp:87 msgid "The cool buffersystem" msgstr "很棒的緩衝區系統" #: part/katefactory.cpp:88 msgid "The Editing Commands" msgstr "編輯命令" #: part/katefactory.cpp:89 msgid "Testing, ..." msgstr "測試中，..." #: part/katefactory.cpp:90 msgid "Former Core Developer" msgstr "早期核心發展者" #: part/katefactory.cpp:92 msgid "KWrite Author" msgstr "KWrite 作者" #: part/katefactory.cpp:93 msgid "KWrite port to KParts" msgstr "KWrite 移植到 KParts" #: part/katefactory.cpp:96 msgid "KWrite Undo History, Kspell integration" msgstr "KWrite 復原的歷史紀錄，Kspell 整合" #: part/katefactory.cpp:97 msgid "KWrite XML Syntax highlighting support" msgstr "KWrite XML 語法突顯支援" #: part/katefactory.cpp:98 msgid "Patches and more" msgstr "修正檔以及其他" #: part/katefactory.cpp:99 msgid "Developer & Highlight wizard" msgstr "開發者 & 突顯功能精靈" #: part/katefactory.cpp:101 msgid "Highlighting for RPM Spec-Files, Perl, Diff and more" msgstr "RPM Spec-Files，Perl，Diff 和其他語法的突顯支援" #: part/katefactory.cpp:102 msgid "Highlighting for VHDL" msgstr "VHDL 突顯支援" #: part/katefactory.cpp:103 msgid "Highlighting for SQL" msgstr "SQL 突顯支援" #: part/katefactory.cpp:104 msgid "Highlighting for Ferite" msgstr "Ferite 突顯支援" #: part/katefactory.cpp:105 msgid "Highlighting for ILERPG" msgstr "ILERPG 突顯支援" #: part/katefactory.cpp:106 msgid "Highlighting for LaTeX" msgstr "Latex 突顯支援" #: part/katefactory.cpp:107 msgid "Highlighting for Makefiles, Python" msgstr "Makefile 與 Python 顏色醒目設定" #: part/katefactory.cpp:108 msgid "Highlighting for Python" msgstr "Python 突顯支援" #: part/katefactory.cpp:110 msgid "Highlighting for Scheme" msgstr "Scheme 突顯支援" #: part/katefactory.cpp:111 msgid "PHP Keyword/Datatype list" msgstr "PHP 關鍵字/資料類型 清單" #: part/katefactory.cpp:112 msgid "Very nice help" msgstr "很棒的說明" #: part/katefactory.cpp:113 msgid "All people who have contributed and I have forgotten to mention" msgstr "所有曾經貢獻而我忘了提到的人們" #: part/katefiletype.cpp:273 msgid "&Filetype:" msgstr "檔案類型(&F):" #: part/katefiletype.cpp:279 msgid "&New" msgstr "新增(&N)" #: part/katefiletype.cpp:282 part/kateschema.cpp:843 #: plugins/autobookmarker/autobookmarker.cpp:410 #, fuzzy msgid "&Delete" msgstr "刪除行" #: part/katefiletype.cpp:289 msgid "N&ame:" msgstr "名稱(&A):" #: part/katefiletype.cpp:294 msgid "&Section:" msgstr "節區(&S):" #: part/katefiletype.cpp:299 msgid "&Variables:" msgstr "變數(&V):" #: part/katefiletype.cpp:332 msgid "Create a new file type." msgstr "建立新的檔案類型。" #: part/katefiletype.cpp:333 msgid "Delete the current file type." msgstr "刪除目前的檔案類型。" #: part/katefiletype.cpp:335 msgid "" "The name of the filetype will be the text of the corresponding menu item." msgstr "檔案類型的名稱會成為對應選單項目的文字。" #: part/katefiletype.cpp:337 msgid "The section name is used to organize the file types in menus." msgstr "此區名稱是用以組織選單中的檔案類型。" #: part/katefiletype.cpp:339 msgid "" "

This string allows you to configure Kate's settings for the files " "selected by this mimetype using Kate variables. You can set almost any " "configuration option, such as highlight, indent-mode, encoding, etc.

For a full list of known variables, see the manual.

" msgstr "" "

此字串讓您可以使用 Kate 變數來設定 Kate 於此檔案類型所選定的檔案設定值。您" "幾乎可以設定任何組態選項，像是突顯文字、行內模式、編碼等等。

需要可用變" "數的完整清單，請查閱手冊。

" #: part/katefiletype.cpp:344 msgid "" "The wildcards mask allows you to select files by filename. A typical mask " "uses an asterisk and the file extension, for example *.txt; *.text. The string is a semicolon-separated list of masks." msgstr "" "萬用字元遮罩允許您以檔案名稱選擇檔案。典型的遮罩使用星號與檔案的延伸檔名，例" "如 *.txt; *.text。此字串是以分號隔開的遮罩清單。" #: part/katefiletype.cpp:349 msgid "" "The mime type mask allows you to select files by mimetype. The string is a " "semicolon-separated list of mimetypes, for example text/plain; text/" "english." msgstr "" "MIME 類型遮罩允許您以 MIME 類型選擇檔案。此字串為以分號隔開的 MIME 類型清單，" "例如 text/plain; text/english。" #: part/katefiletype.cpp:353 msgid "Displays a wizard that helps you easily select mimetypes." msgstr "顯示能協助您簡單的選擇 MIME 類型的精靈。" #: part/katefiletype.cpp:355 msgid "" "Sets a priority for this file type. If more than one file type selects the " "same file, the one with the highest priority will be used." msgstr "" "設定這個檔案類型的優先權。如果超過一個以上的檔案類型選擇同樣的檔案，具有最高" "優先權的將會被使用。" #: part/katefiletype.cpp:427 msgid "New Filetype" msgstr "新增檔案類型" #: part/katefiletype.cpp:471 #, c-format msgid "Properties of %1" msgstr "%1 屬性" #: part/katefiletype.cpp:504 msgid "" "Select the MimeTypes you want for this file type.\n" "Please note that this will automatically edit the associated file extensions " "as well." msgstr "" "選擇您想要用於這個檔案類型的 MIME 類型。\n" "請注意這樣也會自動編輯關連的延伸檔名。" #: part/katehighlight.cpp:1823 msgid "Normal Text" msgstr "純文字檔" #: part/katehighlight.cpp:1971 msgid "" "%1: Deprecated syntax. Attribute (%2) not addressed by symbolic " "name
" msgstr "%1：不建議的語法。屬性 (%2) 未依連結名稱排列
" #: part/katehighlight.cpp:2338 msgid "%1: Deprecated syntax. Context %2 has no symbolic name
" msgstr "%1：不建議的語法。上下文 (%2) 沒有連結名稱
" #: part/katehighlight.cpp:2385 msgid "" "%1:Deprecated syntax. Context %2 not addressed by a symbolic name" msgstr "%1：不建議的語法。上下文 (%2) 未依連結名稱排列" #: part/katehighlight.cpp:2505 msgid "" "There were warning(s) and/or error(s) while parsing the syntax highlighting " "configuration." msgstr "當分析語法突顯組態時發生警告和/或錯誤。" #: part/katehighlight.cpp:2507 msgid "Kate Syntax Highlighting Parser" msgstr "Kate 語法突顯解析器" #: part/katehighlight.cpp:2658 msgid "" "Since there has been an error parsing the highlighting description, this " "highlighting will be disabled" msgstr "因為在解析突顯描述時發生錯誤，這個突顯將會停用" #: part/katehighlight.cpp:2860 msgid "" "%1: Specified multiline comment region (%2) could not be resolved
" msgstr "%1：無法解析指定的多行註解區域 (%2)
" #: part/katehighlight.cpp:3171 msgid "Keyword" msgstr "關鍵字" #: part/katehighlight.cpp:3172 msgid "Data Type" msgstr "資料類型" #: part/katehighlight.cpp:3173 msgid "Decimal/Value" msgstr "十進制/數值" #: part/katehighlight.cpp:3174 msgid "Base-N Integer" msgstr "N進制整數" #: part/katehighlight.cpp:3175 msgid "Floating Point" msgstr "浮點數" #: part/katehighlight.cpp:3176 msgid "Character" msgstr "字元" #: part/katehighlight.cpp:3177 msgid "String" msgstr "字串" #: part/katehighlight.cpp:3179 msgid "Others" msgstr "其他" #: part/katehighlight.cpp:3180 msgid "Alert" msgstr "警示" #: part/katehighlight.cpp:3181 msgid "Function" msgstr "功能" #: part/katehighlight.cpp:3183 msgid "Region Marker" msgstr "區域標記" #: part/katehighlight.cpp:3185 part/kateschema.cpp:310 #, fuzzy msgid "Error" msgstr "錯誤：" #: part/katejscript.cpp:304 part/katejscript.cpp:928 msgid "Exception, line %1: %2" msgstr "發生例外，行 %1：%2" #: part/katejscript.cpp:754 msgid "Command not found" msgstr "找不到指令" #: part/katejscript.cpp:762 part/katejscript.cpp:897 msgid "JavaScript file not found" msgstr "找不到 JavaScript 檔案" #: part/katejscript.cpp:1058 part/katejscript.cpp:1076 #: part/kateluaindentscript.cpp:413 part/kateluaindentscript.cpp:431 msgid "(Unknown)" msgstr "(未知)" #: part/kateluaindentscript.cpp:86 msgid "indenter.register requires 2 parameters (event id, function to call)" msgstr "indenter.register 需要兩個參數（事件代碼,呼叫的函式）" #: part/kateluaindentscript.cpp:94 msgid "" "indenter.register requires 2 parameters (event id (number), function to call " "(function))" msgstr "" "indenter.register 需要兩個參數（事件代碼,呼叫的函式）型態為（數值，函式）" #: part/kateluaindentscript.cpp:108 msgid "indenter.register:invalid event id" msgstr "indenter.register：不合法的事件代碼" #: part/kateluaindentscript.cpp:113 msgid "indenter.register:there is already a function set for given" msgstr "indenter.register：已經是一個函式了" #: part/kateluaindentscript.cpp:126 msgid "document.textLine:One parameter (line number) required" msgstr "document.textLine：需要一個參數（行號）" #: part/kateluaindentscript.cpp:130 msgid "document.textLine:One parameter (line number) required (number)" msgstr "document.textLine：需要一個參數（行號）型態為數值" #: part/kateluaindentscript.cpp:139 msgid "" "document.removeText:Four parameters needed (start line, start col,end line, " "end col)" msgstr "document.removeText：需要四個參數（啟始行,啟始列,結束行,結束列）" #: part/kateluaindentscript.cpp:143 msgid "" "document.removeText:Four parameters needed (start line, start col,end line, " "end col) (4x number)" msgstr "" "document.removeText：需要四個參數（啟始行,啟始列,結束行,結束列），四個參數都" "為數值" #: part/kateluaindentscript.cpp:152 msgid "document.insertText:Three parameters needed (line,col,text)" msgstr "document.inserText：需要三個參數(行,列,文字)" #: part/kateluaindentscript.cpp:156 msgid "" "document.removeText:Three parameters needed (line,col,text) (number,number," "string)" msgstr "" "document.removeText：需要三個參數(行,列,文字) 型態分別為 (數值,數值,字串)" #: part/kateluaindentscript.cpp:253 msgid "LUA interpreter could not be initialized" msgstr "無法初始化 LUA 直譯器" #: part/kateluaindentscript.cpp:293 part/kateluaindentscript.cpp:316 #: part/kateluaindentscript.cpp:344 #, c-format msgid "Lua indenting script had errors: %1" msgstr "LUA 縮排文稿有錯誤：%1" #: part/kateprinter.cpp:72 #, c-format msgid "Print %1" msgstr "列印 %1" #: part/kateprinter.cpp:202 msgid "(Selection of) " msgstr "(選取區於)" #: part/kateprinter.cpp:309 part/kateprinter.cpp:528 #, c-format msgid "Typographical Conventions for %1" msgstr "印刷慣例轉換於 %1" #: part/kateprinter.cpp:639 msgid "Te&xt Settings" msgstr "文字設定(&X)" #: part/kateprinter.cpp:644 msgid "Print &selected text only" msgstr "只列印選取的文字(&S)" #: part/kateprinter.cpp:647 msgid "Print &line numbers" msgstr "列印行號(&L)" #: part/kateprinter.cpp:650 msgid "Print syntax &guide" msgstr "列印語法指南(&G)" #: part/kateprinter.cpp:659 msgid "" "

This option is only available if some text is selected in the document.

If available and enabled, only the selected text is printed.

" msgstr "" "

這個選項只有在文件中有某些文字被選取時才能使用。

如果可以使用並啟用" "它，就只會列印選擇的文字。

" #: part/kateprinter.cpp:662 msgid "" "

If enabled, line numbers will be printed on the left side of the page(s)." "

" msgstr "

如果啟用，行的編號會印在紙張的左邊。

" #: part/kateprinter.cpp:664 msgid "" "

Print a box displaying typographical conventions for the document type, " "as defined by the syntax highlighting being used." msgstr "

列印一個方塊來顯示所用語法突顯定義的文件類型的印刷協定。

" #: part/kateprinter.cpp:700 msgid "Hea&der && Footer" msgstr "頁首 && 頁尾(&D)" #: part/kateprinter.cpp:708 msgid "Pr&int header" msgstr "列印頁首(&I)" #: part/kateprinter.cpp:710 msgid "Pri&nt footer" msgstr "列印頁尾(&N)" #: part/kateprinter.cpp:715 msgid "Header/footer font:" msgstr "頁首/頁尾字型:" #: part/kateprinter.cpp:720 msgid "Choo&se Font..." msgstr "選擇字型(&S)..." #: part/kateprinter.cpp:724 msgid "Header Properties" msgstr "頁首屬性" #: part/kateprinter.cpp:727 msgid "&Format:" msgstr "格式(&F):" #: part/kateprinter.cpp:734 part/kateprinter.cpp:755 msgid "Colors:" msgstr "顏色:" #: part/kateprinter.cpp:737 part/kateprinter.cpp:758 msgid "Foreground:" msgstr "前景:" #: part/kateprinter.cpp:740 msgid "Bac&kground" msgstr "背景(&K)" #: part/kateprinter.cpp:743 msgid "Footer Properties" msgstr "頁尾屬性" #: part/kateprinter.cpp:747 msgid "For&mat:" msgstr "格式(&M):" #: part/kateprinter.cpp:761 msgid "&Background" msgstr "背景(&B):" #: part/kateprinter.cpp:788 msgid "

Format of the page header. The following tags are supported:

" msgstr "

頁首的格式。下面是支援的標籤：

" #: part/kateprinter.cpp:790 msgid "" "
  • %u: current user name
  • %d: complete date/" "time in short format
  • %D: complete date/time in long format
  • %h: current time
  • %y: current date in short " "format
  • %Y: current date in long format
  • %f: " "file name
  • %U: full URL of the document
  • %p: " "page number

Note: Do not use the '|' (vertical " "bar) character." msgstr "" "
  • %u： 目前的使用者名稱
  • %d： 短格式的完整日" "期/時刻
  • %D： 長格式的完整日期/時刻
  • %h： 目" "前的時刻
  • %y： 短格式的目前日期
  • %Y： 長格式" "的目前日期
  • %f： 檔案名稱
  • %U： 文件的完整網" "址
  • %p： 頁碼

注意： 請 勿 使用" "「|」(垂直條) 字元。" #: part/kateprinter.cpp:804 msgid "

Format of the page footer. The following tags are supported:

" msgstr "

頁尾的格式。下面是支援的標籤：

" #: part/kateprinter.cpp:908 msgid "L&ayout" msgstr "佈局(&A)" #: part/kateprinter.cpp:915 part/kateschema.cpp:834 msgid "&Schema:" msgstr "基模(&S):" #: part/kateprinter.cpp:919 msgid "Draw bac&kground color" msgstr "繪出背景顏色(&K)" #: part/kateprinter.cpp:922 msgid "Draw &boxes" msgstr "繪出方塊(&B)" #: part/kateprinter.cpp:925 msgid "Box Properties" msgstr "方塊屬性" #: part/kateprinter.cpp:928 msgid "W&idth:" msgstr "寬度(&I):" #: part/kateprinter.cpp:932 msgid "&Margin:" msgstr "邊界(&M):" #: part/kateprinter.cpp:936 msgid "Co&lor:" msgstr "顏色(&L):" #: part/kateprinter.cpp:954 msgid "" "

If enabled, the background color of the editor will be used.

This " "may be useful if your color scheme is designed for a dark background.

" msgstr "" "

如果啟用，會使用編輯器的背景顏色。

這在您的配色設定是設計為暗色背景" "時可能很有用。

" #: part/kateprinter.cpp:957 msgid "" "

If enabled, a box as defined in the properties below will be drawn around " "the contents of each page. The Header and Footer will be separated from the " "contents with a line as well.

" msgstr "" "

如果啟用，在下面的屬性中定義的方塊會畫在每一頁內容的周圍。頁首與頁尾也會以" "線絛來與內容隔開。

" #: part/kateprinter.cpp:961 msgid "The width of the box outline" msgstr "方塊輪廓的寬度" #: part/kateprinter.cpp:963 msgid "The margin inside boxes, in pixels" msgstr "方塊內部的邊界，以像素為單位" #: part/kateprinter.cpp:965 msgid "The line color to use for boxes" msgstr "用於方塊的線條顏色" #: part/kateschema.cpp:279 msgid "Text Area Background" msgstr "文字區域背景" #: part/kateschema.cpp:283 msgid "Normal text:" msgstr "普通文字：" #: part/kateschema.cpp:289 msgid "Selected text:" msgstr "選擇的文字：" #: part/kateschema.cpp:295 msgid "Current line:" msgstr "目前的行：" #: part/kateschema.cpp:304 part/kateviewhelpers.cpp:704 msgid "Bookmark" msgstr "書籤" #: part/kateschema.cpp:305 msgid "Active Breakpoint" msgstr "使用中斷點" #: part/kateschema.cpp:306 msgid "Reached Breakpoint" msgstr "達到中斷點" #: part/kateschema.cpp:307 msgid "Disabled Breakpoint" msgstr "停用中斷點" #: part/kateschema.cpp:308 msgid "Execution" msgstr "執行" #: part/kateschema.cpp:309 msgid "Warning" msgstr "" #: part/kateschema.cpp:317 msgid "Additional Elements" msgstr "額外的元件" #: part/kateschema.cpp:321 msgid "Left border background:" msgstr "左框線背景:" #: part/kateschema.cpp:327 msgid "Line numbers:" msgstr "行號:" #: part/kateschema.cpp:333 msgid "Bracket highlight:" msgstr "突顯括號:" #: part/kateschema.cpp:339 msgid "Word wrap markers:" msgstr "文字折行標記:" #: part/kateschema.cpp:345 msgid "Tab markers:" msgstr "Tab 標記:" #: part/kateschema.cpp:357 msgid "

Sets the background color of the editing area.

" msgstr "

設定編輯區的背景顏色。

" #: part/kateschema.cpp:358 msgid "" "

Sets the background color of the selection.

To set the text color " "for selected text, use the \"Configure Highlighting\" dialog.

" msgstr "" "

設定選擇區的背景顏色。

要設定選取文字的文字顏色，請使用「設定突顯" "」對話盒。

" #: part/kateschema.cpp:361 msgid "" "

Sets the background color of the selected marker type.

Note: " "The marker color is displayed lightly because of transparency.

" msgstr "" "

設定選取標記類型的背景顏色。

注意：標記的顏色因為透明度的關係" "看起來會比較淡。

" #: part/kateschema.cpp:364 msgid "

Select the marker type you want to change.

" msgstr "

選擇你想要改變的標記類型。

" #: part/kateschema.cpp:365 msgid "" "

Sets the background color of the currently active line, which means the " "line where your cursor is positioned.

" msgstr "

設定目前作用中的行的背景顏色，亦即您的游標所在的行。

" #: part/kateschema.cpp:368 msgid "" "

This color will be used to draw the line numbers (if enabled) and the " "lines in the code-folding pane.

" msgstr "

這個色彩會用來繪製行號（如果啟用）與程式碼折疊窗格中的直線。

" #: part/kateschema.cpp:370 msgid "" "

Sets the bracket matching color. This means, if you place the cursor e.g. " "at a (, the matching ) will be highlighted with this color.

" msgstr "" "

設定對應括號顏色。這表示，如果您將游標置於像(的位置時，對應的)就會以這個顏色來突顯。

" #: part/kateschema.cpp:374 msgid "" "

Sets the color of Word Wrap-related markers:

Static Word Wrap
A vertical line which shows the column where text is going to be " "wrapped
Dynamic Word Wrap
An arrow shown to the left of " "visually-wrapped lines
" msgstr "" "

設定文字折行相關標記的色彩：

靜態文字折行
一條用來顯示" "文字要在何處折行的垂直直線
動態文字折行
一個用來顯示虛擬折行" "左方的箭頭
" #: part/kateschema.cpp:380 msgid "

Sets the color of the tabulator marks:

" msgstr "

設定定位點標記的顏色：

" #: part/kateschema.cpp:605 msgid "" "This list displays the default styles for the current schema and offers the " "means to edit them. The style name reflects the current style settings.

To " "edit the colors, click the colored squares, or select the color to edit from " "the popup menu.

You can unset the Background and Selected Background " "colors from the popup menu when appropriate." msgstr "" "這個清單顯示目前基模的預設風格，並且提供工具來編輯它們。風格名稱反應目前的風" "格設定值。

要編輯顏色，單擊顏色方塊，或從彈出選單選擇要編輯的顏色。

您可" "以在適當的時候從彈出式選單中取消設定背景與選擇的背景顏色。" #: part/kateschema.cpp:711 msgid "" "This list displays the contexts of the current syntax highlight mode and " "offers the means to edit them. The context name reflects the current style " "settings.

To edit using the keyboard, press <SPACE> " "and choose a property from the popup menu.

To edit the colors, click the " "colored squares, or select the color to edit from the popup menu.

You can " "unset the Background and Selected Background colors from the context menu " "when appropriate." msgstr "" "這個清單顯示目前的語法突顯模式的背景，並且提供工具來編輯它們。背景名稱反應目" "前的風格設定值。

要使用鍵盤編輯，按<空白鍵>並從彈出" "選單選擇屬性。

要編輯顏色，單擊顏色方塊，或從彈出選單選擇要編輯的顏色。

" "您可以在適當的時候從快顯選單中取消設定背景與選擇的背景顏色。" #: part/kateschema.cpp:840 plugins/autobookmarker/autobookmarker.cpp:405 msgid "&New..." msgstr "新的(&N)..." #: part/kateschema.cpp:853 msgid "Colors" msgstr "顏色" #: part/kateschema.cpp:856 msgid "Font" msgstr "" #: part/kateschema.cpp:859 msgid "Normal Text Styles" msgstr "普通文字風格" #: part/kateschema.cpp:863 msgid "Highlighting Text Styles" msgstr "突顯文字風格" #: part/kateschema.cpp:868 msgid "&Default schema for %1:" msgstr "%1 的預設基模(&D):" #: part/kateschema.cpp:966 msgid "Name for New Schema" msgstr "新基模名稱" #: part/kateschema.cpp:966 msgid "Name:" msgstr "名稱:" #: part/kateschema.cpp:966 msgid "New Schema" msgstr "新基模" #: part/kateschema.cpp:1053 msgid "Context" msgstr "內容" #: part/kateschema.cpp:1059 msgid "Selected" msgstr "已選取" #: part/kateschema.cpp:1060 msgid "Background" msgstr "背景" #: part/kateschema.cpp:1061 msgid "Background Selected" msgstr "背景選擇" #: part/kateschema.cpp:1063 msgid "Use Default Style" msgstr "使用預設風格" #: part/kateschema.cpp:1097 msgid "&Bold" msgstr "粗體(&B)" #: part/kateschema.cpp:1099 msgid "&Italic" msgstr "斜體(&I)" #: part/kateschema.cpp:1101 msgid "&Underline" msgstr "加底線(&U)" #: part/kateschema.cpp:1103 msgid "S&trikeout" msgstr "刪除線(&T)" #: part/kateschema.cpp:1108 msgid "Normal &Color..." msgstr "一般色彩(&C)..." #: part/kateschema.cpp:1109 msgid "&Selected Color..." msgstr "已選取的顏色(&S)..." #: part/kateschema.cpp:1110 msgid "&Background Color..." msgstr "背景顏色(&B)..." #: part/kateschema.cpp:1111 msgid "S&elected Background Color..." msgstr "選擇背景顏色(&E)..." #: part/kateschema.cpp:1122 msgid "Unset Background Color" msgstr "取消設定背景顏色" #: part/kateschema.cpp:1124 msgid "Unset Selected Background Color" msgstr "取消設定選定的背景色彩" #: part/kateschema.cpp:1129 msgid "Use &Default Style" msgstr "使用預設風格(&D)" #: part/kateschema.cpp:1352 msgid "" "\"Use Default Style\" will be automatically unset when you change any style " "properties." msgstr "當您改變任何風格的屬性時，「使用預設風格」會自動取消。" #: part/kateschema.cpp:1353 msgid "Kate Styles" msgstr "Kate 風格" #: part/katesearch.cpp:72 msgid "Look up the first occurrence of a piece of text or regular expression." msgstr "尋找第一次出現的文字或正規表示式中的一部份。" #: part/katesearch.cpp:74 msgid "Look up the next occurrence of the search phrase." msgstr "尋找下一個出現的搜尋語詞。" #: part/katesearch.cpp:76 msgid "Look up the previous occurrence of the search phrase." msgstr "尋找上一個出現的搜尋語詞。" #: part/katesearch.cpp:78 msgid "" "Look up a piece of text or regular expression and replace the result with " "some given text." msgstr "尋找文字或正規表示式中的一部份並以所給的文字來取代搜尋結果。" #: part/katesearch.cpp:331 msgid "Search string '%1' not found!" msgstr "找不到搜尋的字串「%1」！" #: part/katesearch.cpp:333 part/katesearch.cpp:510 msgid "Find" msgstr "尋找" #: part/katesearch.cpp:353 part/katesearch.cpp:371 part/katesearch.cpp:487 #, c-format msgid "" "_n: %n replacement made.\n" "%n replacements made." msgstr "完成 %n 次取代。" #: part/katesearch.cpp:354 part/katesearch.cpp:372 part/katesearch.cpp:510 #, fuzzy msgid "Replace" msgstr "取代(&R)" #: part/katesearch.cpp:491 msgid "End of document reached." msgstr "已到達文件的結尾。" #: part/katesearch.cpp:492 msgid "Beginning of document reached." msgstr "已到達文件的開頭。" #: part/katesearch.cpp:497 msgid "End of selection reached." msgstr "已到達選擇區的結尾。" #: part/katesearch.cpp:498 msgid "Beginning of selection reached." msgstr "已到達選擇區的開頭。" #: part/katesearch.cpp:502 msgid "Continue from the beginning?" msgstr "從開頭處繼續？" #: part/katesearch.cpp:503 msgid "Continue from the end?" msgstr "從結尾處繼續？" #: part/katesearch.cpp:511 msgid "&Stop" msgstr "停止(&S)" #: part/katesearch.cpp:765 msgid "Replace Confirmation" msgstr "確認取代" #: part/katesearch.cpp:767 msgid "Replace &All" msgstr "全部取代(&A)" #: part/katesearch.cpp:767 msgid "Re&place && Close" msgstr "取代 && 關閉(&P)" #: part/katesearch.cpp:767 msgid "&Replace" msgstr "取代(&R)" #: part/katesearch.cpp:769 msgid "&Find Next" msgstr "尋找下一個(&F)" #: part/katesearch.cpp:774 msgid "Found an occurrence of your search term. What do you want to do?" msgstr "發現符合您搜尋條件的項目。您想要怎麼做？" #: part/katesearch.cpp:826 msgid "Usage: find[:[bcersw]] PATTERN" msgstr "用法：find[:[bcersw]] PATTERN" #: part/katesearch.cpp:838 msgid "Usage: ifind[:[bcrs]] PATTERN" msgstr "用法： ifind[:[bcrs]] PATTERN" #: part/katesearch.cpp:892 msgid "Usage: replace[:[bceprsw]] PATTERN [REPLACEMENT]" msgstr "用法： replace[:[bceprsw]] PATTERN [REPLACEMENT]" #: part/katesearch.cpp:926 msgid "

Usage: find[:bcersw] PATTERN

" msgstr "

用法： find[:bcersw] PATTERN

" #: part/katesearch.cpp:929 msgid "" "

Usage: ifind:[:bcrs] PATTERN
ifind does incremental or " "'as-you-type' search

" msgstr "" "

用法： ifind:[:bcrs] PATTERN
ifind 進行的是增加式或「如同" "您輸入」的搜尋

" #: part/katesearch.cpp:933 msgid "

Usage: replace[:bceprsw] PATTERN REPLACEMENT

" msgstr "

用法： replace[:bceprsw] PATTERN REPLACEMENT

" #: part/katesearch.cpp:936 msgid "" "

Options

b - Search backward
c - Search " "from cursor
r - Pattern is a regular expression
s - Case " "sensitive search" msgstr "" "

選項

b - 向後搜尋
c - 自游標處搜尋" "
r - Pattern 為正規表示式
s - 區分大小寫的搜尋" #: part/katesearch.cpp:945 msgid "" "
e - Search in selected text only
w - Search whole words " "only" msgstr "
e - 只在選取的文字中搜尋
w - 只搜尋整個文字" #: part/katesearch.cpp:951 msgid "" "
p - Prompt for replace

If REPLACEMENT is not present, an " "empty string is used.

If you want to have whitespace in your PATTERN, " "you need to quote both PATTERN and REPLACEMENT with either single or double " "quotes. To have the quote characters in the strings, prepend them with a " "backslash." msgstr "" "
p - 取代時先提示

若 REPLACEMENT 未出現，則使用空字串。

如果您想要在 PATTERN 中加入空白，您需要將 PATTERN 與 REPLACEMENT 兩者都" "以單或雙引號標示。要在字串中使用引號字元，請在引號前加上反斜線。" #: part/katespell.cpp:57 msgid "Spelling (from cursor)..." msgstr "拼字檢查（從游標處）..." #: part/katespell.cpp:58 msgid "Check the document's spelling from the cursor and forward" msgstr "從游標處向前檢查文件的拼字" #: part/katespell.cpp:60 msgid "Spellcheck Selection..." msgstr "拼字檢查選擇區..." #: part/katespell.cpp:61 msgid "Check spelling of the selected text" msgstr "檢查選擇文字的拼字" #: part/katespell.cpp:125 msgid "Spellcheck" msgstr "拼字檢查" #: part/katespell.cpp:205 msgid "" "The spelling program could not be started. Please make sure you have set the " "correct spelling program and that it is properly configured and in your PATH." msgstr "" "無法啟動拼字檢查程式。請檢查您已設定了正確的拼字檢查程式並且它已經設定完成且" "位於您的 PATH 中。" #: part/katespell.cpp:210 msgid "The spelling program seems to have crashed." msgstr "拼字檢查程式似乎已經當掉。" #: part/katesyntaxdocument.cpp:76 msgid "" "The error %4
has been detected in the file %1 at %2/%3" msgstr "在檔案 %1 中的 %2/%3 偵測到
錯誤 %4" #: part/katesyntaxdocument.cpp:84 #, c-format msgid "Unable to open %1" msgstr "無法開啟 %1" #: part/katesyntaxdocument.cpp:457 msgid "Errors!" msgstr "錯誤！" #: part/katesyntaxdocument.cpp:462 #, c-format msgid "Error: %1" msgstr "錯誤： %1" #: part/kateview.cpp:216 msgid "Cut the selected text and move it to the clipboard" msgstr "剪下選擇的文字並將它移至剪貼簿" #: part/kateview.cpp:219 msgid "Paste previously copied or cut clipboard contents" msgstr "貼上先前複製或剪下的剪貼簿" #: part/kateview.cpp:222 msgid "" "Use this command to copy the currently selected text to the system clipboard." msgstr "使用這個指令來將目前選擇的文字複製到系統剪貼簿。" #: part/kateview.cpp:224 msgid "Copy as &HTML" msgstr "複製為 &HTML" #: part/kateview.cpp:225 msgid "" "Use this command to copy the currently selected text as HTML to the system " "clipboard." msgstr "使用這個指令來將目前選擇的文字以 HTML 形式複製到系統剪貼簿。" #: part/kateview.cpp:230 msgid "Save the current document" msgstr "儲存目前文件" #: part/kateview.cpp:233 msgid "Revert the most recent editing actions" msgstr "回復最接近的編輯動作" #: part/kateview.cpp:236 msgid "Revert the most recent undo operation" msgstr "回復最接近的復原操作" #: part/kateview.cpp:238 msgid "&Word Wrap Document" msgstr "文件自動折行(&W)" #: part/kateview.cpp:239 msgid "" "Use this command to wrap all lines of the current document which are longer " "than the width of the current view, to fit into this view.

This is a " "static word wrap, meaning it is not updated when the view is resized." msgstr "" "使用這個指令讓目前文件中所有比目前視窗寬度更長的行折為多行。

這是靜態" "的文字折行，亦即當視窗改變大小後並不會隨之更新。" #: part/kateview.cpp:244 msgid "&Indent" msgstr "縮排(&I)" #: part/kateview.cpp:245 msgid "" "Use this to indent a selected block of text.

You can configure " "whether tabs should be honored and used or replaced with spaces, in the " "configuration dialog." msgstr "" "使用這個來將選擇的文字區塊縮排。

您可以在組態對話盒中設定要優先使用跳" "格(Tab)或以空格代替。" #: part/kateview.cpp:247 msgid "&Unindent" msgstr "取消縮排(&U)" #: part/kateview.cpp:248 msgid "Use this to unindent a selected block of text." msgstr "使用這個來取消所選文字區塊的縮排。" #: part/kateview.cpp:250 msgid "&Clean Indentation" msgstr "清除縮排(&C)" #: part/kateview.cpp:251 msgid "" "Use this to clean the indentation of a selected block of text (only tabs/" "only spaces)

You can configure whether tabs should be honored and " "used or replaced with spaces, in the configuration dialog." msgstr "" "使用這個來清除所選文字區塊的縮排(只有跳格/只有空白)

您可以在組態對話盒" "中設定要優先使用跳格(Tab)或以空格代替。" #: part/kateview.cpp:254 msgid "&Align" msgstr "對齊(&A)" #: part/kateview.cpp:255 msgid "" "Use this to align the current line or block of text to its proper indent " "level." msgstr "使用這個將目前的行或文字的區塊對齊它的縮排層級。" #: part/kateview.cpp:257 msgid "C&omment" msgstr "註解(&O)" #: part/kateview.cpp:259 msgid "" "This command comments out the current line or a selected block of text." "

The characters for single/multiple line comments are defined within " "the language's highlighting." msgstr "" "這個指令為目前的行或選擇的文字區塊加上註解。

單行/多行的註解字元都在語" "言的突顯中定義。" #: part/kateview.cpp:262 msgid "Unco&mment" msgstr "取消註解(&M)" #: part/kateview.cpp:264 msgid "" "This command removes comments from the current line or a selected block of " "text.

The characters for single/multiple line comments are defined " "within the language's highlighting." msgstr "" "這個指令會移除目前的行或選擇的文字區塊的註解。

單行/多行的註解字元都在" "語言的突顯中定義。" #: part/kateview.cpp:267 msgid "&Read Only Mode" msgstr "唯讀模式(&R)" #: part/kateview.cpp:270 msgid "Lock/unlock the document for writing" msgstr "鎖定/取消鎖定此文件的寫入" #: part/kateview.cpp:272 msgid "Uppercase" msgstr "大寫" #: part/kateview.cpp:274 msgid "" "Convert the selection to uppercase, or the character to the right of the " "cursor if no text is selected." msgstr "將選擇區轉換為大寫，如果沒有選擇文字則使用游標右方的字元。" #: part/kateview.cpp:277 msgid "Lowercase" msgstr "小寫" #: part/kateview.cpp:279 msgid "" "Convert the selection to lowercase, or the character to the right of the " "cursor if no text is selected." msgstr "將選擇區轉換為小寫，如果沒有選擇文字則使用游標右方的字元。" #: part/kateview.cpp:282 msgid "Capitalize" msgstr "保持大寫字" #: part/kateview.cpp:284 msgid "" "Capitalize the selection, or the word under the cursor if no text is " "selected." msgstr "將選擇區轉換為大寫，如果沒有選擇文字則使用游標下方的文字。" #: part/kateview.cpp:287 part/kateview.cpp:589 msgid "Delete Line" msgstr "刪除行" #: part/kateview.cpp:289 #, fuzzy msgid "Use this to delete the current line." msgstr "按下這個按鈕來刪除目前選擇的項目。" #: part/kateview.cpp:291 msgid "Join Lines" msgstr "連接線段" #: part/kateview.cpp:293 msgid "Use this to join lines together." msgstr "" #: part/kateview.cpp:304 msgid "Print the current document." msgstr "列印目前的文件。" #: part/kateview.cpp:306 msgid "Reloa&d" msgstr "重新載入(&D)" #: part/kateview.cpp:307 msgid "Reload the current document from disk." msgstr "由磁碟重新載入目前的文件。" #: part/kateview.cpp:310 msgid "Save the current document to disk, with a name of your choice." msgstr "儲存目前檔案到磁碟內，請指定檔案名稱。" #: part/kateview.cpp:313 msgid "" "This command opens a dialog and lets you choose a line that you want the " "cursor to move to." msgstr "這個指令開啟對話盒並讓您選擇您想要游標移動到哪一行。" #: part/kateview.cpp:315 msgid "&Configure Editor..." msgstr "編輯器設定(&C)..." #: part/kateview.cpp:316 msgid "Configure various aspects of this editor." msgstr "設定這個編輯器的各方面選項。" #: part/kateview.cpp:318 msgid "&Highlighting" msgstr "突顯(&H)" #: part/kateview.cpp:319 msgid "Here you can choose how the current document should be highlighted." msgstr "您可以在這裡選擇目前的文件該如何突顯。" #: part/kateview.cpp:322 msgid "&Filetype" msgstr "檔案類型(&F)" #: part/kateview.cpp:325 msgid "&Schema" msgstr "基模(&S)" #: part/kateview.cpp:329 msgid "&Indentation" msgstr "縮排(&I)" #: part/kateview.cpp:332 msgid "E&xport as HTML..." msgstr "匯出為 HTML(&X)" #: part/kateview.cpp:333 msgid "" "This command allows you to export the current document with all highlighting " "information into a HTML document." msgstr "這個指令允許您將目前的文件與突顯的資訊匯出成 HTML 文件。" #: part/kateview.cpp:337 msgid "Select the entire text of the current document." msgstr "選擇目前文件的所有文字。" #: part/kateview.cpp:340 msgid "" "If you have selected something within the current document, this will no " "longer be selected." msgstr "如果您在目前的文件中已經選擇某些東西，將無法選擇此項。" #: part/kateview.cpp:342 msgid "Enlarge Font" msgstr "加大字型" #: part/kateview.cpp:343 msgid "This increases the display font size." msgstr "這會增加顯示字型的大小。" #: part/kateview.cpp:345 msgid "Shrink Font" msgstr "收縮字型" #: part/kateview.cpp:346 msgid "This decreases the display font size." msgstr "這會減少顯示字型的大小。" #: part/kateview.cpp:349 msgid "Bl&ock Selection Mode" msgstr "區塊選擇模式(&O)" #: part/kateview.cpp:352 msgid "" "This command allows switching between the normal (line based) selection mode " "and the block selection mode." msgstr "這個指令允許在一般（以行為基礎）選擇模式與區塊選擇模式之間切換。" #: part/kateview.cpp:355 msgid "Overwr&ite Mode" msgstr "覆寫模式(&I)" #: part/kateview.cpp:358 msgid "" "Choose whether you want the text you type to be inserted or to overwrite " "existing text." msgstr "選擇您希望您輸入的文字插入或覆蓋既存的文字。" #: part/kateview.cpp:362 msgid "&Dynamic Word Wrap" msgstr "動態折行(&D)" #: part/kateview.cpp:367 msgid "Dynamic Word Wrap Indicators" msgstr "動態文字折行指示器" #: part/kateview.cpp:372 msgid "&Off" msgstr "關閉(&O)" #: part/kateview.cpp:373 msgid "Follow &Line Numbers" msgstr "跟隨行號(&L)" #: part/kateview.cpp:374 msgid "&Always On" msgstr "永遠開啟(&A)" #: part/kateview.cpp:378 msgid "Show Folding &Markers" msgstr "顯示摺疊記號" #: part/kateview.cpp:381 msgid "" "You can choose if the codefolding marks should be shown, if codefolding is " "possible." msgstr "如果能使用摺疊，您可以選擇是否要顯示摺疊記號。" #: part/kateview.cpp:382 msgid "Hide Folding &Markers" msgstr "隱藏摺疊記號(&M)" #: part/kateview.cpp:385 msgid "Show &Icon Border" msgstr "顯示圖示邊框(&I)" #: part/kateview.cpp:389 msgid "" "Show/hide the icon border.

The icon border shows bookmark symbols, " "for instance." msgstr "顯示/隱藏圖示邊框。

例如，圖示邊框顯示書籤標記。" #: part/kateview.cpp:390 msgid "Hide &Icon Border" msgstr "隱藏圖示邊框(&I)" #: part/kateview.cpp:393 msgid "Show &Line Numbers" msgstr "顯示行號(&L)" #: part/kateview.cpp:396 msgid "Show/hide the line numbers on the left hand side of the view." msgstr "顯示/隱藏在檢視左手邊的行編號。" #: part/kateview.cpp:397 msgid "Hide &Line Numbers" msgstr "隱藏行號(&L)" #: part/kateview.cpp:400 msgid "Show Scroll&bar Marks" msgstr "顯示捲動軸標記(&B)" #: part/kateview.cpp:403 msgid "" "Show/hide the marks on the vertical scrollbar.

The marks, for " "instance, show bookmarks." msgstr "顯示/隱藏垂直捲動軸標記。

例如，顯示書籤標記。" #: part/kateview.cpp:404 msgid "Hide Scroll&bar Marks" msgstr "隱藏捲動軸標記(&B)" #: part/kateview.cpp:407 msgid "Show Static &Word Wrap Marker" msgstr "顯示靜態文字折行標記(&W)" #: part/kateview.cpp:411 msgid "" "Show/hide the Word Wrap Marker, a vertical line drawn at the word wrap " "column as defined in the editing properties" msgstr "顯示/隱藏文字折行標記，一條在編輯屬性中定義繪製於文字折行處的垂直線" #: part/kateview.cpp:413 msgid "Hide Static &Word Wrap Marker" msgstr "隱藏靜態文字折行標記(&W)" #: part/kateview.cpp:416 msgid "Switch to Command Line" msgstr "切換至命令列" #: part/kateview.cpp:419 msgid "Show/hide the command line on the bottom of the view." msgstr "顯示/隱藏在檢視底部的命令列。" #: part/kateview.cpp:421 msgid "&End of Line" msgstr "行的結尾(&E)" #: part/kateview.cpp:422 msgid "Choose which line endings should be used, when you save the document" msgstr "選擇當您儲存文件時應使用何種行結尾" #: part/kateview.cpp:432 msgid "E&ncoding" msgstr "編碼(&N)" #: part/kateview.cpp:449 msgid "Move Word Left" msgstr "左移文字" #: part/kateview.cpp:453 msgid "Select Character Left" msgstr "選擇左方字元" #: part/kateview.cpp:457 msgid "Select Word Left" msgstr "選擇左方文字" #: part/kateview.cpp:462 msgid "Move Word Right" msgstr "右移文字" #: part/kateview.cpp:466 msgid "Select Character Right" msgstr "選擇右方字元" #: part/kateview.cpp:470 msgid "Select Word Right" msgstr "選擇右方文字" #: part/kateview.cpp:475 msgid "Move to Beginning of Line" msgstr "移至行的開頭" #: part/kateview.cpp:479 msgid "Move to Beginning of Document" msgstr "移至文件的開頭" #: part/kateview.cpp:483 msgid "Select to Beginning of Line" msgstr "選擇至行的開頭" #: part/kateview.cpp:487 msgid "Select to Beginning of Document" msgstr "選擇至文件的開頭" #: part/kateview.cpp:492 msgid "Move to End of Line" msgstr "移至行的結尾" #: part/kateview.cpp:496 msgid "Move to End of Document" msgstr "移至文件的結尾" #: part/kateview.cpp:500 msgid "Select to End of Line" msgstr "選擇至行的開頭" #: part/kateview.cpp:504 msgid "Select to End of Document" msgstr "選擇至文件的開頭" #: part/kateview.cpp:509 msgid "Select to Previous Line" msgstr "選擇至上一行" #: part/kateview.cpp:513 msgid "Scroll Line Up" msgstr "向上捲動一行" #: part/kateview.cpp:517 msgid "Move to Next Line" msgstr "移至下一行" #: part/kateview.cpp:520 msgid "Move to Previous Line" msgstr "移至上一行" #: part/kateview.cpp:523 msgid "Move Character Right" msgstr "右移字元" #: part/kateview.cpp:526 msgid "Move Character Left" msgstr "左移字元" #: part/kateview.cpp:530 msgid "Select to Next Line" msgstr "選擇至下一行" #: part/kateview.cpp:534 msgid "Scroll Line Down" msgstr "向下捲動一行" #: part/kateview.cpp:539 msgid "Scroll Page Up" msgstr "向上捲動一頁" #: part/kateview.cpp:543 msgid "Select Page Up" msgstr "向上選擇一頁" #: part/kateview.cpp:547 msgid "Move to Top of View" msgstr "移至檢視頂端" #: part/kateview.cpp:551 msgid "Select to Top of View" msgstr "選擇至檢視頂端" #: part/kateview.cpp:556 msgid "Scroll Page Down" msgstr "向下捲動一頁" #: part/kateview.cpp:560 msgid "Select Page Down" msgstr "向下選擇一頁" #: part/kateview.cpp:564 msgid "Move to Bottom of View" msgstr "移至檢視底部" #: part/kateview.cpp:568 msgid "Select to Bottom of View" msgstr "選擇至檢視底部" #: part/kateview.cpp:572 msgid "Move to Matching Bracket" msgstr "移至對應括號" #: part/kateview.cpp:576 msgid "Select to Matching Bracket" msgstr "選擇至對應括號" #: part/kateview.cpp:584 msgid "Transpose Characters" msgstr "調換字元" #: part/kateview.cpp:594 msgid "Delete Word Left" msgstr "刪除左方文字" #: part/kateview.cpp:599 msgid "Delete Word Right" msgstr "刪除右方文字" #: part/kateview.cpp:603 msgid "Delete Next Character" msgstr "刪除下個字元" #: part/kateview.cpp:607 msgid "Backspace" msgstr "Backspace" #: part/kateview.cpp:633 msgid "Collapse Toplevel" msgstr "收起頂端層級" #: part/kateview.cpp:635 msgid "Expand Toplevel" msgstr "展開頂端層級" #: part/kateview.cpp:637 msgid "Collapse One Local Level" msgstr "收起一個層級" #: part/kateview.cpp:639 msgid "Expand One Local Level" msgstr "展開一個層級" #: part/kateview.cpp:644 msgid "Show the code folding region tree" msgstr "顯示程式碼摺疊樹" #: part/kateview.cpp:645 msgid "Basic template code test" msgstr "基本樣板程式碼測試" #: part/kateview.cpp:707 msgid " OVR " msgstr "複寫" #: part/kateview.cpp:709 msgid " INS " msgstr "插入" #: part/kateview.cpp:712 msgid " R/O " msgstr "唯讀" #: part/kateview.cpp:717 #, c-format msgid " Line: %1" msgstr "行: %1" #: part/kateview.cpp:718 #, c-format msgid " Col: %1" msgstr "欄: %1" #: part/kateview.cpp:721 msgid " BLK " msgstr "區塊" #: part/kateview.cpp:721 msgid " NORM " msgstr " 一般 " #: part/kateview.cpp:897 msgid "Overwrite the file" msgstr "覆寫檔案" #: part/kateview.cpp:1799 msgid "Export File as HTML" msgstr "匯出檔案為 HTML" #: part/kateviewhelpers.cpp:237 msgid "Available Commands" msgstr "可用的指令" #: part/kateviewhelpers.cpp:239 msgid "" "

For help on individual commands, do 'help <command>'" msgstr "

需要個別指令的協助，請使用 'help <command>'

" #: part/kateviewhelpers.cpp:250 msgid "No help for '%1'" msgstr "沒有「%1」的說明" #: part/kateviewhelpers.cpp:253 msgid "No such command %1" msgstr "沒有這樣的指令 %1" #: part/kateviewhelpers.cpp:258 msgid "" "

This is the Katepart command line.
Syntax: command " "[ arguments ]
For a list of available commands, enter " "help list
For help for individual commands, enter " "help <command>

" msgstr "" "

這是 Katepart 命令列。
語法： command [ arguments ]
需要可以用指令的清單，輸入 help list
需要" "個別制定的說明，輸入 help <command>

" #: part/kateviewhelpers.cpp:345 msgid "Success: " msgstr "成功：" #: part/kateviewhelpers.cpp:347 msgid "Success" msgstr "成功" #: part/kateviewhelpers.cpp:352 msgid "Error: " msgstr "錯誤：" #: part/kateviewhelpers.cpp:354 msgid "Command \"%1\" failed." msgstr "指令「%1」失敗。" #: part/kateviewhelpers.cpp:360 msgid "No such command: \"%1\"" msgstr "沒有這樣的指令：「%1」" #: part/kateviewhelpers.cpp:1127 part/kateviewhelpers.cpp:1128 #, c-format msgid "Mark Type %1" msgstr "標記類型 %1" #: part/kateviewhelpers.cpp:1144 msgid "Set Default Mark Type" msgstr "設定預設遮罩類型" #: plugins/autobookmarker/autobookmarker.cpp:90 msgid "AutoBookmarks" msgstr "自動書籤" #: plugins/autobookmarker/autobookmarker.cpp:101 msgid "Configure AutoBookmarks" msgstr "設定自動書籤" #: plugins/autobookmarker/autobookmarker.cpp:279 msgid "Edit Entry" msgstr "編輯項目" #: plugins/autobookmarker/autobookmarker.cpp:287 msgid "&Pattern:" msgstr "樣式(&P):" #: plugins/autobookmarker/autobookmarker.cpp:293 msgid "

A regular expression. Matching lines will be bookmarked.

" msgstr "

一個正規表示式。符合的行將會被標上書籤。

" #: plugins/autobookmarker/autobookmarker.cpp:297 msgid "Case &sensitive" msgstr "區分大小寫(&S)" #: plugins/autobookmarker/autobookmarker.cpp:301 msgid "" "

If enabled, the pattern matching will be case sensitive, otherwise not." msgstr "

如果啟用，樣式的比對將會是區分大小寫的，相反則無。

" #: plugins/autobookmarker/autobookmarker.cpp:304 msgid "&Minimal matching" msgstr "最小符合(&M)" #: plugins/autobookmarker/autobookmarker.cpp:308 msgid "" "

If enabled, the pattern matching will use minimal matching; if you do not " "know what that is, please read the appendix on regular expressions in the " "kate manual.

" msgstr "" "

如果啟用，樣式的比對會使用最小符合；如果您不知道那代表什麼，請閱讀 kate 手" "冊中正規表示式的附錄。

" #: plugins/autobookmarker/autobookmarker.cpp:312 msgid "&File mask:" msgstr "檔案遮罩(&F):" #: plugins/autobookmarker/autobookmarker.cpp:318 msgid "" "

A list of filename masks, separated by semicolons. This can be used to " "limit the usage of this entity to files with matching names.

Use the " "wizard button to the right of the mimetype entry below to easily fill out " "both lists.

" msgstr "" "

檔案名稱遮罩的清單，以分號隔開。這可以用來限制符合此名稱的檔案數目。

使用 MIME 類型項目右邊的精靈按鈕可以很輕鬆的填好兩邊的清單。

" #: plugins/autobookmarker/autobookmarker.cpp:329 msgid "" "

A list of mime types, separated by semicolon. This can be used to limit " "the usage of this entity to files with matching mime types.

Use the " "wizard button on the right to get a list of existing file types to choose " "from, using it will fill in the file masks as well.

" msgstr "" "

MIME 類型的清單，以分號隔開。這可以用來限制符合此 MIME 類型的檔案項目。

使用右邊的精靈按鈕可以取得既存檔案類型的清單以供選擇，也可以使用它來填入" "檔案遮罩。

" #: plugins/autobookmarker/autobookmarker.cpp:339 msgid "" "

Click this button to display a checkable list of mimetypes available on " "your system. When used, the file masks entry above will be filled in with " "the corresponding masks.

" msgstr "" "

按下這個按鈕以顯示在你系統中可用的 MIME 類型核取清單。在使用時，上方的檔案" "遮罩項目將填入相對的遮罩。

" #: plugins/autobookmarker/autobookmarker.cpp:364 msgid "" "Select the MimeTypes for this pattern.\n" "Please note that this will automatically edit the associated file extensions " "as well." msgstr "" "選擇這個樣式的 MIME 類型。\n" "請注意這樣也會自動編輯關連的延伸檔名。" #: plugins/autobookmarker/autobookmarker.cpp:384 msgid "&Patterns" msgstr "樣式(&P)" #: plugins/autobookmarker/autobookmarker.cpp:387 msgid "Pattern" msgstr "樣式" #: plugins/autobookmarker/autobookmarker.cpp:388 msgid "Mime Types" msgstr "Mime 類型" #: plugins/autobookmarker/autobookmarker.cpp:389 msgid "File Masks" msgstr "檔案遮罩" #: plugins/autobookmarker/autobookmarker.cpp:393 msgid "" "

This list shows your configured autobookmark entities. When a document is " "opened, each entity is used in the following way:

  1. The entity is " "dismissed, if a mime and/or filename mask is defined, and neither matches " "the document.
  2. Otherwise each line of the document is tried against " "the pattern, and a bookmark is set on matching lines.

    3. Use the " "buttons below to manage your collection of entities.

    " msgstr "" "

    這個清單顯示您設定的自動書籤項目。當開啟一份文件時，每個項目都會以下列方式" "來使用：

    1. 此項目無效，如果 MIME 和/或檔案名稱遮罩已定義，卻無相符的文" "件。
    2. 除非本文件的每一行都比對過，而書籤也設定於符合的行中。

      3. 使用下列按鈕來管理您自己收集的項目。

      " #: plugins/autobookmarker/autobookmarker.cpp:408 msgid "Press this button to create a new autobookmark entity." msgstr "按下這個按鈕以建立新的自動書籤項目。" #: plugins/autobookmarker/autobookmarker.cpp:413 msgid "Press this button to delete the currently selected entity." msgstr "按下這個按鈕來刪除目前選擇的項目。" #: plugins/autobookmarker/autobookmarker.cpp:415 msgid "&Edit..." msgstr "編輯(&E)..." #: plugins/autobookmarker/autobookmarker.cpp:418 msgid "Press this button to edit the currently selected entity." msgstr "按下這個按鈕來編緝目前選擇的項目。" #: plugins/insertfile/insertfileplugin.cpp:79 msgid "Insert File..." msgstr "插入檔案..." #: plugins/insertfile/insertfileplugin.cpp:88 msgid "Choose File to Insert" msgstr "選擇要插入的檔案" #: plugins/insertfile/insertfileplugin.cpp:89 #, fuzzy msgid "&Insert" msgstr "安裝(&I)" #: plugins/insertfile/insertfileplugin.cpp:116 msgid "" "Failed to load file:\n" "\n" msgstr "" "載入檔案失敗：\n" "\n" #: plugins/insertfile/insertfileplugin.cpp:116 #: plugins/insertfile/insertfileplugin.cpp:137 #: plugins/insertfile/insertfileplugin.cpp:159 msgid "Insert File Error" msgstr "插入檔案時發生錯誤" #: plugins/insertfile/insertfileplugin.cpp:130 msgid "" "

      The file %1 does not exist or is not readable, aborting." msgstr "

      檔案 %1 不存在或無法讀取，放棄中。" #: plugins/insertfile/insertfileplugin.cpp:134 msgid "

      Unable to open file %1, aborting." msgstr "

      無法開啟檔案 %1，放棄中。" #: plugins/insertfile/insertfileplugin.cpp:157 msgid "

      File %1 had no contents." msgstr "

      檔案 %1 沒有內容。" #: plugins/isearch/ISearchPlugin.cpp:68 plugins/isearch/ISearchPlugin.cpp:371 msgid "Search Incrementally" msgstr "遞增搜尋" #: plugins/isearch/ISearchPlugin.cpp:72 plugins/isearch/ISearchPlugin.cpp:372 msgid "Search Incrementally Backwards" msgstr "向後遞增搜尋" #: plugins/isearch/ISearchPlugin.cpp:76 plugins/isearch/ISearchPlugin.cpp:79 msgid "I-Search:" msgstr "遞增搜尋:" #: plugins/isearch/ISearchPlugin.cpp:95 msgid "Search" msgstr "搜尋:" #: plugins/isearch/ISearchPlugin.cpp:101 msgid "Search Options" msgstr "搜尋選項" #: plugins/isearch/ISearchPlugin.cpp:106 plugins/isearch/ISearchPlugin.cpp:412 msgid "Case Sensitive" msgstr "區分大小寫" #: plugins/isearch/ISearchPlugin.cpp:115 plugins/isearch/ISearchPlugin.cpp:414 msgid "From Beginning" msgstr "從頭開始" #: plugins/isearch/ISearchPlugin.cpp:124 plugins/isearch/ISearchPlugin.cpp:416 msgid "Regular Expression" msgstr "正規表示式" #: plugins/isearch/ISearchPlugin.cpp:244 msgid "" "_: Incremental Search\n" "I-Search:" msgstr "遞增搜尋:" #: plugins/isearch/ISearchPlugin.cpp:247 msgid "" "_: Incremental Search found no match\n" "Failing I-Search:" msgstr "遞增搜尋失敗:" #: plugins/isearch/ISearchPlugin.cpp:250 msgid "" "_: Incremental Search in the reverse direction\n" "I-Search Backward:" msgstr "向後遞增搜尋:" #: plugins/isearch/ISearchPlugin.cpp:253 msgid "Failing I-Search Backward:" msgstr "向後遞增搜尋失敗:" #: plugins/isearch/ISearchPlugin.cpp:256 msgid "" "_: Incremental Search has passed the end of the document\n" "Wrapped I-Search:" msgstr "折返遞增搜尋:" #: plugins/isearch/ISearchPlugin.cpp:259 msgid "Failing Wrapped I-Search:" msgstr "折返遞增搜尋失敗:" #: plugins/isearch/ISearchPlugin.cpp:262 msgid "Wrapped I-Search Backward:" msgstr "向後折返遞增搜尋:" #: plugins/isearch/ISearchPlugin.cpp:265 msgid "Failing Wrapped I-Search Backward:" msgstr "向後折返遞增搜尋失敗:" #: plugins/isearch/ISearchPlugin.cpp:269 msgid "" "_: Incremental Search has passed both the end of the document and the " "original starting position\n" "Overwrapped I-Search:" msgstr "重覆折返遞增搜尋:" #: plugins/isearch/ISearchPlugin.cpp:272 msgid "Failing Overwrapped I-Search:" msgstr "重覆折返遞增搜尋失敗:" #: plugins/isearch/ISearchPlugin.cpp:275 msgid "Overwrapped I-Search Backwards:" msgstr "向後重覆折返遞增搜尋:" #: plugins/isearch/ISearchPlugin.cpp:278 msgid "Failing Overwrapped I-Search Backward:" msgstr "向後重覆折返遞增搜尋失敗:" #: plugins/isearch/ISearchPlugin.cpp:280 msgid "Error: unknown i-search state!" msgstr "錯誤：未知的 i-search 狀態！" #: plugins/isearch/ISearchPlugin.cpp:341 msgid "Next Incremental Search Match" msgstr "下一個符合遞增搜尋的" #: plugins/isearch/ISearchPlugin.cpp:342 msgid "Previous Incremental Search Match" msgstr "上一個符合遞增搜尋的" #: plugins/kdatatool/kate_kdatatool.cpp:78 msgid "Data Tools" msgstr "資料工具" #: plugins/kdatatool/kate_kdatatool.cpp:153 #: plugins/kdatatool/kate_kdatatool.cpp:175 msgid "(not available)" msgstr "（不可使用）" #: plugins/kdatatool/kate_kdatatool.cpp:183 msgid "" "Data tools are only available when text is selected, or when the right mouse " "button is clicked over a word. If no data tools are offered even when text " "is selected, you need to install them. Some data tools are part of the " "KOffice package." msgstr "" "資料工具只有在文字被選擇或在文字上方按下滑鼠右鍵時才可以使用。如果即使選擇了" "文字仍然沒有提供資料工具，您需要安裝它們。有些資料工具是 KOffice 套件的一部" "份。" #: plugins/wordcompletion/docwordcompletion.cpp:109 msgid "Word Completion Plugin" msgstr "自動補齊外掛程式" #: plugins/wordcompletion/docwordcompletion.cpp:114 msgid "Configure the Word Completion Plugin" msgstr "設定文字補齊外掛程式" #: plugins/wordcompletion/docwordcompletion.cpp:148 msgid "Reuse Word Above" msgstr "重新使用上個字" #: plugins/wordcompletion/docwordcompletion.cpp:150 msgid "Reuse Word Below" msgstr "重新使用下個字" #: plugins/wordcompletion/docwordcompletion.cpp:152 msgid "Pop Up Completion List" msgstr "彈出補齊清單" #: plugins/wordcompletion/docwordcompletion.cpp:154 msgid "Shell Completion" msgstr "Shell 補齊" #: plugins/wordcompletion/docwordcompletion.cpp:156 msgid "Automatic Completion Popup" msgstr "自動補齊彈出" #: plugins/wordcompletion/docwordcompletion.cpp:498 msgid "Automatically &show completion list" msgstr "自動顯示補齊清單(&S)" #: plugins/wordcompletion/docwordcompletion.cpp:511 msgid "" "_: Translators: This is the first part of two strings wich will comprise the " "sentence 'Show completions when a word is at least N characters'. The first " "part is on the right side of the N, which is represented by a spinbox " "widget, followed by the second part: 'characters long'. Characters is a " "ingeger number between and including 1 and 30. Feel free to leave the second " "part of the sentence blank if it suits your language better. \n" "Show completions &when a word is at least" msgstr "顯示補齊當文字最少為(&W)" #: plugins/wordcompletion/docwordcompletion.cpp:517 msgid "" "_: This is the second part of two strings that will comprise teh sentence " "'Show completions when a word is at least N characters'\n" "characters long." msgstr "字元長度." #: plugins/wordcompletion/docwordcompletion.cpp:520 msgid "" "Enable the automatic completion list popup as default. The popup can be " "disabled on a view basis from the 'Tools' menu." msgstr "預設啟用彈出自動補齊清單。此彈出項目可以在「工具」選單中停用。" #: plugins/wordcompletion/docwordcompletion.cpp:523 msgid "" "Define the length a word should have before the completion list is displayed." msgstr "定義在補齊清單中要顯示的文字長度。" #: data/katepartreadonlyui.rc:4 data/katepartui.rc:4 #, fuzzy, no-c-format msgid "&File" msgstr "檔案類型(&F)" #: data/katepartreadonlyui.rc:11 data/katepartui.rc:13 #: plugins/isearch/tdetexteditor_isearchui.rc:4 #, fuzzy, no-c-format msgid "&Edit" msgstr "編輯(&E)..." #: data/katepartreadonlyui.rc:25 data/katepartui.rc:36 #, no-c-format msgid "&View" msgstr "" #: data/katepartreadonlyui.rc:39 data/katepartui.rc:50 #, no-c-format msgid "&Code Folding" msgstr "程式碼摺疊(&C)" #: data/katepartreadonlyui.rc:49 data/katepartui.rc:61 #: plugins/insertfile/tdetexteditor_insertfileui.rc:4 #: plugins/wordcompletion/docwordcompletionui.rc:4 #, fuzzy, no-c-format msgid "&Tools" msgstr "資料工具" #: data/katepartreadonlyui.rc:76 data/katepartui.rc:91 #, fuzzy, no-c-format msgid "&Settings" msgstr "文字設定(&X)" #: data/katepartreadonlyui.rc:93 data/katepartui.rc:111 #, no-c-format msgid "Main Toolbar" msgstr "" #: plugins/isearch/tdetexteditor_isearchui.rc:9 #, fuzzy, no-c-format msgid "Search Toolbar" msgstr "搜尋:" #: plugins/wordcompletion/docwordcompletionui.rc:6 #, fuzzy, no-c-format msgid "Word Completion" msgstr "自動補齊外掛程式" #: data/4dos.xml:9 data/ahk.xml:3 data/ample.xml:3 data/awk.xml:3 #: data/bash.xml:11 data/dosbat.xml:11 data/erlang.xml:39 data/euphoria.xml:32 #: data/ferite.xml:3 data/gnuplot.xml:3 data/html-php.xml:13 #: data/idconsole.xml:3 data/j.xml:27 data/javascript.xml:6 data/ld.xml:4 #: data/lsl.xml:14 data/lua.xml:38 data/mason.xml:3 data/mel.xml:23 #: data/perl.xml:42 data/php.xml:67 data/pig.xml:4 data/pike.xml:4 #: data/praat.xml:24 data/python.xml:16 data/q.xml:3 data/qml.xml:4 #: data/r.xml:10 data/rexx.xml:3 data/ruby.xml:33 data/scheme.xml:43 #: data/sed.xml:3 data/sieve.xml:4 data/taskjuggler.xml:14 data/tcl.xml:31 #: data/tcsh.xml:11 data/uscript.xml:3 data/velocity.xml:3 #: data/xonotic-console.xml:3 data/zsh.xml:11 msgid "" "_: Language Section\n" "Scripts" msgstr "命令稿" #: data/abap.xml:3 data/actionscript.xml:3 data/ansic89.xml:27 #: data/bitbake.xml:11 data/c.xml:3 data/cg.xml:23 data/cgis.xml:3 #: data/clipper.xml:3 data/clojure.xml:25 data/commonlisp.xml:26 #: data/component-pascal.xml:13 data/cpp.xml:9 data/crk.xml:2 data/cs.xml:2 #: data/d.xml:104 data/e.xml:3 data/eiffel.xml:13 data/fortran.xml:3 #: data/freebasic.xml:3 data/fsharp.xml:12 data/glsl.xml:3 data/go.xml:29 #: data/grammar.xml:6 data/groovy.xml:6 data/haskell.xml:3 data/haxe.xml:15 #: data/idl.xml:3 data/ilerpg.xml:48 data/inform.xml:5 data/java.xml:3 #: data/julia.xml:32 data/kbasic.xml:3 data/lex.xml:21 #: data/literate-haskell.xml:3 data/logtalk.xml:4 data/lpc.xml:19 #: data/m4.xml:41 data/modelica.xml:19 data/modula-2.xml:3 #: data/monobasic.xml:13 data/nemerle.xml:4 data/nesc.xml:3 data/noweb.xml:3 #: data/objectivec.xml:3 data/objectivecpp.xml:3 data/oors.xml:3 #: data/opal.xml:3 data/opencl.xml:3 data/prolog.xml:107 data/protobuf.xml:3 #: data/purebasic.xml:2 data/rapidq.xml:3 data/rsiidl.xml:3 data/rust.xml:37 #: data/sather.xml:3 data/scala.xml:3 data/sml.xml:3 data/stata.xml:3 #: data/tads3.xml:5 data/xharbour.xml:3 data/yacc.xml:28 data/zonnon.xml:3 msgid "" "_: Language Section\n" "Sources" msgstr "來源" #: data/abc.xml:5 data/alert.xml:29 data/alert_indent.xml:29 #: data/changelog.xml:3 data/css-php.xml:32 data/cue.xml:3 #: data/debianchangelog.xml:3 data/debiancontrol.xml:3 data/diff.xml:18 #: data/dockerfile.xml:4 data/email.xml:6 data/gdb.xml:10 data/git-rebase.xml:3 #: data/hunspell-aff.xml:3 data/hunspell-dat.xml:3 data/hunspell-dic.xml:3 #: data/jam.xml:24 data/javascript-php.xml:12 data/lilypond.xml:23 #: data/m3u.xml:17 data/makefile.xml:10 data/meson.xml:3 data/mup.xml:3 #: data/povray.xml:9 data/qmake.xml:3 data/rib.xml:8 data/rpmspec.xml:11 #: data/valgrind-suppression.xml:3 msgid "" "_: Language Section\n" "Other" msgstr "其他" #: data/ahdl.xml:3 data/spice.xml:4 data/systemc.xml:10 #: data/systemverilog.xml:42 data/vera.xml:42 data/verilog.xml:3 #: data/vhdl.xml:14 msgid "" "_: Language Section\n" "Hardware" msgstr "硬體" #: data/ansys.xml:3 data/bmethod.xml:3 data/dot.xml:4 data/gap.xml:17 #: data/gdl.xml:3 data/magma.xml:3 data/mathematica.xml:3 data/matlab.xml:60 #: data/maxima.xml:24 data/octave.xml:18 data/replicode.xml:14 data/sci.xml:3 #: data/tibasic.xml:3 data/yacas.xml:3 msgid "" "_: Language Section\n" "Scientific" msgstr "科學" #: data/apache.xml:15 data/asterisk.xml:19 data/cisco.xml:3 data/fstab.xml:4 #: data/git-ignore.xml:3 data/gitolite.xml:3 data/ini.xml:3 #: data/mergetagtext.xml:28 data/nagios.xml:3 data/varnish.xml:3 #: data/varnishtest.xml:3 data/winehq.xml:3 data/xorg.xml:3 msgid "" "_: Language Section\n" "Configuration" msgstr "組態" #: data/asm-avr.xml:36 data/asm-dsp56k.xml:4 data/asm-m68k.xml:4 #: data/asm6502.xml:3 data/fasm.xml:16 data/gnuassembler.xml:46 data/mips.xml:3 #: data/nasm.xml:43 data/picsrc.xml:11 msgid "" "_: Language Section\n" "Assembler" msgstr "組合語言" #: data/asn1.xml:12 data/asp.xml:3 data/bibtex.xml:9 data/ccss.xml:9 #: data/coldfusion.xml:3 data/context.xml:3 data/css.xml:26 data/ddoc.xml:52 #: data/djangotemplate.xml:7 data/doxygenlua.xml:30 data/dtd.xml:6 #: data/ftl.xml:3 data/gettext.xml:26 data/glosstex.xml:3 data/haml.xml:3 #: data/hamlet.xml:8 data/html.xml:7 data/javadoc.xml:3 data/json.xml:15 #: data/jsp.xml:3 data/latex.xml:3 data/less.xml:3 data/mab.xml:3 #: data/mako.xml:7 data/mandoc.xml:3 data/mediawiki.xml:7 data/metafont.xml:9 #: data/pango.xml:3 data/postscript.xml:3 data/ppd.xml:12 #: data/relaxngcompact.xml:3 data/rest.xml:14 data/restructuredtext.xml:3 #: data/rhtml.xml:47 data/roff.xml:10 data/rtf.xml:3 data/scss.xml:28 #: data/sgml.xml:3 data/sisu.xml:3 data/texinfo.xml:3 data/textile.xml:18 #: data/txt2tags.xml:6 data/vcard.xml:5 data/wml.xml:57 data/xml.xml:9 #: data/xmldebug.xml:3 data/xslt.xml:55 data/xul.xml:7 data/yaml.xml:4 msgid "" "_: Language Section\n" "Markup" msgstr "標記" #: data/fgl-4gl.xml:3 data/fgl-per.xml:3 data/ldif.xml:3 data/progress.xml:3 #: data/sql-mysql.xml:8 data/sql-oracle.xml:4 data/sql-postgresql.xml:4 #: data/sql.xml:6 msgid "" "_: Language Section\n" "Database" msgstr "資料庫" #: data/vrml.xml:3 #, fuzzy msgid "" "_: Language Section\n" "3D" msgstr "其他" #: data/4dos.xml:9 #, fuzzy msgid "" "_: Language\n" "4DOS BatchToMemory" msgstr "Sather" #: data/abap.xml:3 #, fuzzy msgid "" "_: Language\n" "ABAP" msgstr "ABC" #: data/abc.xml:5 msgid "" "_: Language\n" "ABC" msgstr "ABC" #: data/actionscript.xml:3 msgid "" "_: Language\n" "ActionScript 2.0" msgstr "ActionScript 2.0" #: data/ada.xml:3 msgid "" "_: Language\n" "Ada" msgstr "Ada" #: data/ahdl.xml:3 msgid "" "_: Language\n" "AHDL" msgstr "AHDL" #: data/ahk.xml:3 #, fuzzy msgid "" "_: Language\n" "AutoHotKey" msgstr "AWK" #: data/alert.xml:29 msgid "" "_: Language\n" "Alerts" msgstr "警示" #: data/alert_indent.xml:29 #, fuzzy msgid "" "_: Language\n" "Alerts_indent" msgstr "警示" #: data/ample.xml:3 #, fuzzy msgid "" "_: Language\n" "AMPLE" msgstr "ASP" #: data/ansic89.xml:27 msgid "" "_: Language\n" "ANSI C89" msgstr "ANSI C89" #: data/ansys.xml:3 #, fuzzy msgid "" "_: Language\n" "Ansys" msgstr "yacas" #: data/apache.xml:15 msgid "" "_: Language\n" "Apache Configuration" msgstr "Apache 組態" #: data/asm-avr.xml:36 msgid "" "_: Language\n" "AVR Assembler" msgstr "AVR Assembler" #: data/asm-dsp56k.xml:4 #, fuzzy msgid "" "_: Language\n" "Motorola DSP56k" msgstr "Matlab" #: data/asm-m68k.xml:4 #, fuzzy msgid "" "_: Language\n" "Motorola 68k (VASM/Devpac)" msgstr "Intel x86 (NASM)" #: data/asm6502.xml:3 msgid "" "_: Language\n" "Asm6502" msgstr "Asm6502" #: data/asn1.xml:12 #, fuzzy msgid "" "_: Language\n" "ASN.1" msgstr "ASP" #: data/asp.xml:3 msgid "" "_: Language\n" "ASP" msgstr "ASP" #: data/asterisk.xml:19 #, fuzzy msgid "" "_: Language\n" "Asterisk" msgstr "警示" #: data/awk.xml:3 msgid "" "_: Language\n" "AWK" msgstr "AWK" #: data/bash.xml:11 msgid "" "_: Language\n" "Bash" msgstr "Bash" #: data/bibtex.xml:9 msgid "" "_: Language\n" "BibTeX" msgstr "BibTeX" #: data/bitbake.xml:11 #, fuzzy msgid "" "_: Language\n" "Bitbake" msgstr "BibTeX" #: data/bmethod.xml:3 #, fuzzy msgid "" "_: Language\n" "B-Method" msgstr "Python" #: data/c.xml:3 msgid "" "_: Language\n" "C" msgstr "C" #: data/ccss.xml:9 #, fuzzy msgid "" "_: Language\n" "CleanCSS" msgstr "CSS" #: data/cg.xml:23 msgid "" "_: Language\n" "Cg" msgstr "Cg" #: data/cgis.xml:3 msgid "" "_: Language\n" "CGiS" msgstr "CGiS" #: data/changelog.xml:3 msgid "" "_: Language\n" "ChangeLog" msgstr "ChangeLog" #: data/cisco.xml:3 msgid "" "_: Language\n" "Cisco" msgstr "Cisco" #: data/clipper.xml:3 msgid "" "_: Language\n" "Clipper" msgstr "剪輯" #: data/clojure.xml:25 #, fuzzy msgid "" "_: Language\n" "Clojure" msgstr "C" #: data/coffee.xml:4 #, fuzzy msgid "" "_: Language\n" "CoffeeScript" msgstr "PostScript" #: data/coldfusion.xml:3 msgid "" "_: Language\n" "ColdFusion" msgstr "ColdFusion" #: data/commonlisp.xml:26 msgid "" "_: Language\n" "Common Lisp" msgstr "Common Lisp" #: data/component-pascal.xml:13 msgid "" "_: Language\n" "Component-Pascal" msgstr "Component-Pascal" #: data/context.xml:3 #, fuzzy msgid "" "_: Language\n" "ConTeXt" msgstr "LaTeX" #: data/cpp.xml:9 msgid "" "_: Language\n" "C++" msgstr "C++" #: data/crk.xml:2 #, fuzzy msgid "" "_: Language\n" "Crack" msgstr "CMake" #: data/cs.xml:2 msgid "" "_: Language\n" "C#" msgstr "C#" #: data/css-php.xml:32 #, fuzzy msgid "" "_: Language\n" "CSS/PHP" msgstr "CSS" #: data/css.xml:26 msgid "" "_: Language\n" "CSS" msgstr "CSS" #: data/cue.xml:3 msgid "" "_: Language\n" "CUE Sheet" msgstr "CUE 工作表" #: data/curry.xml:33 #, fuzzy msgid "" "_: Language\n" "Curry" msgstr "C" #: data/d.xml:104 msgid "" "_: Language\n" "D" msgstr "D" #: data/ddoc.xml:52 #, fuzzy msgid "" "_: Language\n" "Ddoc" msgstr "D" #: data/debianchangelog.xml:3 msgid "" "_: Language\n" "Debian Changelog" msgstr "Debian Changelog" #: data/debiancontrol.xml:3 msgid "" "_: Language\n" "Debian Control" msgstr "Debian Control" #: data/desktop.xml:3 msgid "" "_: Language\n" ".desktop" msgstr ".desktop" #: data/diff.xml:18 msgid "" "_: Language\n" "Diff" msgstr "Diff" #: data/djangotemplate.xml:7 #, fuzzy msgid "" "_: Language\n" "Django HTML Template" msgstr "HTML" #: data/dockerfile.xml:4 #, fuzzy msgid "" "_: Language\n" "Dockerfile" msgstr "Makefile" #: data/dosbat.xml:11 #, fuzzy msgid "" "_: Language\n" "MS-DOS Batch" msgstr "MAB-DB" #: data/dot.xml:4 #, fuzzy msgid "" "_: Language\n" "dot" msgstr "Ada" #: data/doxygen.xml:31 msgid "" "_: Language\n" "Doxygen" msgstr "Doxygen" #: data/doxygenlua.xml:30 #, fuzzy msgid "" "_: Language\n" "DoxygenLua" msgstr "Doxygen" #: data/dtd.xml:6 #, fuzzy msgid "" "_: Language\n" "DTD" msgstr "D" #: data/e.xml:3 msgid "" "_: Language\n" "E Language" msgstr "E 語言" #: data/eiffel.xml:13 msgid "" "_: Language\n" "Eiffel" msgstr "Eiffel" #: data/email.xml:6 msgid "" "_: Language\n" "Email" msgstr "Email" #: data/erlang.xml:39 #, fuzzy msgid "" "_: Language\n" "Erlang" msgstr "Prolog" #: data/euphoria.xml:32 msgid "" "_: Language\n" "Euphoria" msgstr "Euphoria" #: data/fasm.xml:16 #, fuzzy msgid "" "_: Language\n" "Intel x86 (FASM)" msgstr "Intel x86 (NASM)" #: data/ferite.xml:3 msgid "" "_: Language\n" "ferite" msgstr "ferite" #: data/fgl-4gl.xml:3 msgid "" "_: Language\n" "4GL" msgstr "4GL" #: data/fgl-per.xml:3 msgid "" "_: Language\n" "4GL-PER" msgstr "4GL-PER" #: data/fortran.xml:3 msgid "" "_: Language\n" "Fortran" msgstr "Fortran" #: data/freebasic.xml:3 #, fuzzy msgid "" "_: Language\n" "FreeBASIC" msgstr "ANSI C89" #: data/fsharp.xml:12 #, fuzzy msgid "" "_: Language\n" "FSharp" msgstr "Sather" #: data/fstab.xml:4 msgid "" "_: Language\n" "fstab" msgstr "fstab" #: data/ftl.xml:3 #, fuzzy msgid "" "_: Language\n" "FTL" msgstr "HTML" #: data/gap.xml:17 #, fuzzy msgid "" "_: Language\n" "GAP" msgstr "ASP" #: data/gcode.xml:28 #, fuzzy msgid "" "_: Language\n" "G-Code" msgstr "GDL" #: data/gdb.xml:10 #, fuzzy msgid "" "_: Language\n" "GDB Backtrace" msgstr "Octave" #: data/gdl.xml:3 msgid "" "_: Language\n" "GDL" msgstr "GDL" #: data/gettext.xml:26 msgid "" "_: Language\n" "GNU Gettext" msgstr "GNU Gettext" #: data/git-ignore.xml:3 #, fuzzy msgid "" "_: Language\n" "Git Ignore" msgstr "Inform" #: data/git-rebase.xml:3 #, fuzzy msgid "" "_: Language\n" "Git Rebase" msgstr "Sieve" #: data/gitolite.xml:3 #, fuzzy msgid "" "_: Language\n" "Gitolite" msgstr "ferite" #: data/glosstex.xml:3 #, fuzzy msgid "" "_: Language\n" "GlossTex" msgstr "LaTeX" #: data/glsl.xml:3 msgid "" "_: Language\n" "GLSL" msgstr "GLSL" #: data/gnuassembler.xml:46 msgid "" "_: Language\n" "GNU Assembler" msgstr "GNU 組合語言" #: data/gnuplot.xml:3 #, fuzzy msgid "" "_: Language\n" "Gnuplot" msgstr "xslt" #: data/go.xml:29 #, fuzzy msgid "" "_: Language\n" "Go" msgstr "GDL" #: data/grammar.xml:6 #, fuzzy msgid "" "_: Language\n" "KDev-PG[-Qt] Grammar" msgstr "Stata" #: data/groovy.xml:6 #, fuzzy msgid "" "_: Language\n" "Groovy" msgstr "GDL" #: data/haml.xml:3 #, fuzzy msgid "" "_: Language\n" "Haml" msgstr "Haskell" #: data/hamlet.xml:8 #, fuzzy msgid "" "_: Language\n" "Hamlet" msgstr "Haskell" #: data/haskell.xml:3 msgid "" "_: Language\n" "Haskell" msgstr "Haskell" #: data/haxe.xml:15 #, fuzzy msgid "" "_: Language\n" "Haxe" msgstr "Haskell" #: data/html-php.xml:13 #, fuzzy msgid "" "_: Language\n" "PHP (HTML)" msgstr "HTML" #: data/html.xml:7 msgid "" "_: Language\n" "HTML" msgstr "HTML" #: data/hunspell-aff.xml:3 #, fuzzy msgid "" "_: Language\n" "Hunspell Affix File" msgstr "Haskell" #: data/hunspell-dat.xml:3 #, fuzzy msgid "" "_: Language\n" "Hunspell Thesaurus File" msgstr "Haskell" #: data/hunspell-dic.xml:3 #, fuzzy msgid "" "_: Language\n" "Hunspell Dictionary File" msgstr "硬體" #: data/idconsole.xml:3 msgid "" "_: Language\n" "Quake Script" msgstr "Quake Script" #: data/idl.xml:3 msgid "" "_: Language\n" "IDL" msgstr "IDL" #: data/ilerpg.xml:48 msgid "" "_: Language\n" "ILERPG" msgstr "ILERPG" #: data/inform.xml:5 msgid "" "_: Language\n" "Inform" msgstr "Inform" #: data/ini.xml:3 msgid "" "_: Language\n" "INI Files" msgstr "INI 檔" #: data/j.xml:27 #, fuzzy msgid "" "_: Language\n" "J" msgstr "JSP" #: data/jam.xml:24 #, fuzzy msgid "" "_: Language\n" "Jam" msgstr "Java" #: data/java.xml:3 msgid "" "_: Language\n" "Java" msgstr "Java" #: data/javadoc.xml:3 msgid "" "_: Language\n" "Javadoc" msgstr "Javadoc" #: data/javascript-php.xml:12 #, fuzzy msgid "" "_: Language\n" "JavaScript/PHP" msgstr "JavaScript" #: data/javascript.xml:6 msgid "" "_: Language\n" "JavaScript" msgstr "JavaScript" #: data/json.xml:15 #, fuzzy msgid "" "_: Language\n" "JSON" msgstr "JSP" #: data/jsp.xml:3 msgid "" "_: Language\n" "JSP" msgstr "JSP" #: data/julia.xml:32 #, fuzzy msgid "" "_: Language\n" "Julia" msgstr "Lua" #: data/kbasic.xml:3 msgid "" "_: Language\n" "KBasic" msgstr "KBasic" #: data/latex.xml:3 msgid "" "_: Language\n" "LaTeX" msgstr "LaTeX" #: data/ld.xml:4 #, fuzzy msgid "" "_: Language\n" "GNU Linker Script" msgstr "Quake Script" #: data/ldif.xml:3 msgid "" "_: Language\n" "LDIF" msgstr "LDIF" #: data/less.xml:3 #, fuzzy msgid "" "_: Language\n" "LESSCSS" msgstr "CSS" #: data/lex.xml:21 msgid "" "_: Language\n" "Lex/Flex" msgstr "Lex/Flex" #: data/lilypond.xml:23 msgid "" "_: Language\n" "LilyPond" msgstr "LilyPond" #: data/literate-curry.xml:3 #, fuzzy msgid "" "_: Language\n" "Literate Curry" msgstr "Literate Haskell" #: data/literate-haskell.xml:3 msgid "" "_: Language\n" "Literate Haskell" msgstr "Literate Haskell" #: data/logtalk.xml:4 msgid "" "_: Language\n" "Logtalk" msgstr "Logtalk" #: data/lpc.xml:19 msgid "" "_: Language\n" "LPC" msgstr "LPC" #: data/lsl.xml:14 #, fuzzy msgid "" "_: Language\n" "LSL" msgstr "GLSL" #: data/lua.xml:38 msgid "" "_: Language\n" "Lua" msgstr "Lua" #: data/m3u.xml:17 msgid "" "_: Language\n" "M3U" msgstr "M3U" #: data/m4.xml:41 #, fuzzy msgid "" "_: Language\n" "GNU M4" msgstr "SGML" #: data/mab.xml:3 msgid "" "_: Language\n" "MAB-DB" msgstr "MAB-DB" #: data/magma.xml:3 #, fuzzy msgid "" "_: Language\n" "Magma" msgstr "Matlab" #: data/makefile.xml:10 msgid "" "_: Language\n" "Makefile" msgstr "Makefile" #: data/mako.xml:7 #, fuzzy msgid "" "_: Language\n" "Mako" msgstr "Mason" #: data/mandoc.xml:3 #, fuzzy msgid "" "_: Language\n" "Troff Mandoc" msgstr "Javadoc" #: data/mason.xml:3 msgid "" "_: Language\n" "Mason" msgstr "Mason" #: data/mathematica.xml:3 #, fuzzy msgid "" "_: Language\n" "Mathematica" msgstr "Stata" #: data/matlab.xml:60 msgid "" "_: Language\n" "Matlab" msgstr "Matlab" #: data/maxima.xml:24 #, fuzzy msgid "" "_: Language\n" "Maxima" msgstr "Matlab" #: data/mediawiki.xml:7 msgid "" "_: Language\n" "MediaWiki" msgstr "MediaWiki" #: data/mel.xml:23 #, fuzzy msgid "" "_: Language\n" "MEL" msgstr "SML" #: data/mergetagtext.xml:28 #, fuzzy msgid "" "_: Language\n" "mergetag text" msgstr "GNU Gettext" #: data/meson.xml:3 #, fuzzy msgid "" "_: Language\n" "Meson" msgstr "Mason" #: data/metafont.xml:9 #, fuzzy msgid "" "_: Language\n" "Metapost/Metafont" msgstr "Mason" #: data/mips.xml:3 msgid "" "_: Language\n" "MIPS Assembler" msgstr "MIPS 組合語言" #: data/modelica.xml:19 #, fuzzy msgid "" "_: Language\n" "Modelica" msgstr "Modula-2" #: data/modelines.xml:10 #, fuzzy msgid "" "_: Language\n" "Modelines" msgstr "Mason" #: data/modula-2.xml:3 msgid "" "_: Language\n" "Modula-2" msgstr "Modula-2" #: data/monobasic.xml:13 #, fuzzy msgid "" "_: Language\n" "MonoBasic" msgstr "KBasic" #: data/mup.xml:3 msgid "" "_: Language\n" "Music Publisher" msgstr "Music Publisher" #: data/nagios.xml:3 #, fuzzy msgid "" "_: Language\n" "Nagios" msgstr "Bash" #: data/nasm.xml:43 msgid "" "_: Language\n" "Intel x86 (NASM)" msgstr "Intel x86 (NASM)" #: data/nemerle.xml:4 #, fuzzy msgid "" "_: Language\n" "Nemerle" msgstr "Perl" #: data/nesc.xml:3 #, fuzzy msgid "" "_: Language\n" "nesC" msgstr "C" #: data/noweb.xml:3 #, fuzzy msgid "" "_: Language\n" "noweb" msgstr "C" #: data/objectivec.xml:3 msgid "" "_: Language\n" "Objective-C" msgstr "Objective-C" #: data/objectivecpp.xml:3 #, fuzzy msgid "" "_: Language\n" "Objective-C++" msgstr "Objective-C" #: data/ocaml.xml:16 msgid "" "_: Language\n" "Objective Caml" msgstr "Objective Caml" #: data/ocamllex.xml:10 #, fuzzy msgid "" "_: Language\n" "Objective Caml Ocamllex" msgstr "Objective Caml" #: data/ocamlyacc.xml:13 #, fuzzy msgid "" "_: Language\n" "Objective Caml Ocamlyacc" msgstr "Objective Caml" #: data/octave.xml:18 msgid "" "_: Language\n" "Octave" msgstr "Octave" #: data/oors.xml:3 #, fuzzy msgid "" "_: Language\n" "OORS" msgstr "ASP" #: data/opal.xml:3 #, fuzzy msgid "" "_: Language\n" "OPAL" msgstr "AHDL" #: data/opencl.xml:3 #, fuzzy msgid "" "_: Language\n" "OpenCL" msgstr "C" #: data/pango.xml:3 #, fuzzy msgid "" "_: Language\n" "Pango" msgstr "ChangeLog" #: data/pascal.xml:3 msgid "" "_: Language\n" "Pascal" msgstr "Pascal" #: data/perl.xml:42 msgid "" "_: Language\n" "Perl" msgstr "Perl" #: data/php.xml:67 msgid "" "_: Language\n" "PHP/PHP" msgstr "PHP/PHP" #: data/picsrc.xml:11 msgid "" "_: Language\n" "PicAsm" msgstr "PicAsm" #: data/pig.xml:4 #, fuzzy msgid "" "_: Language\n" "Pig" msgstr "Pike" #: data/pike.xml:4 msgid "" "_: Language\n" "Pike" msgstr "Pike" #: data/postscript.xml:3 msgid "" "_: Language\n" "PostScript" msgstr "PostScript" #: data/povray.xml:9 msgid "" "_: Language\n" "POV-Ray" msgstr "POV-Ray" #: data/ppd.xml:12 #, fuzzy msgid "" "_: Language\n" "PostScript Printer Description" msgstr "PostScript" #: data/praat.xml:24 #, fuzzy msgid "" "_: Language\n" "Praat" msgstr "Pascal" #: data/progress.xml:3 msgid "" "_: Language\n" "progress" msgstr "progress" #: data/prolog.xml:107 msgid "" "_: Language\n" "Prolog" msgstr "Prolog" #: data/protobuf.xml:3 #, fuzzy msgid "" "_: Language\n" "Protobuf" msgstr "Prolog" #: data/purebasic.xml:2 msgid "" "_: Language\n" "PureBasic" msgstr "PureBasic" #: data/python.xml:16 msgid "" "_: Language\n" "Python" msgstr "Python" #: data/q.xml:3 #, fuzzy msgid "" "_: Language\n" "q" msgstr "C" #: data/qmake.xml:3 #, fuzzy msgid "" "_: Language\n" "QMake" msgstr "CMake" #: data/qml.xml:4 #, fuzzy msgid "" "_: Language\n" "QML" msgstr "SML" #: data/r.xml:10 msgid "" "_: Language\n" "R Script" msgstr "R Script" #: data/rapidq.xml:3 #, fuzzy msgid "" "_: Language\n" "RapidQ" msgstr "Email" #: data/relaxngcompact.xml:3 #, fuzzy msgid "" "_: Language\n" "RelaxNG-Compact" msgstr "Velocity" #: data/replicode.xml:14 #, fuzzy msgid "" "_: Language\n" "Replicode" msgstr "Spice" #: data/rest.xml:14 #, fuzzy msgid "" "_: Language\n" "reStructuredText" msgstr "GNU Gettext" #: data/restructuredtext.xml:3 #, fuzzy msgid "" "_: Language\n" "Restructured Text" msgstr "GNU Gettext" #: data/rexx.xml:3 msgid "" "_: Language\n" "REXX" msgstr "REXX" #: data/rhtml.xml:47 msgid "" "_: Language\n" "Ruby/Rails/RHTML" msgstr "Ruby/Rails/RHTML" #: data/rib.xml:8 msgid "" "_: Language\n" "RenderMan RIB" msgstr "RenderMan RIB" #: data/roff.xml:10 #, fuzzy msgid "" "_: Language\n" "Roff" msgstr "Diff" #: data/rpmspec.xml:11 msgid "" "_: Language\n" "RPM Spec" msgstr "RPM Spec" #: data/rsiidl.xml:3 msgid "" "_: Language\n" "RSI IDL" msgstr "RSI IDL" #: data/rtf.xml:3 #, fuzzy msgid "" "_: Language\n" "Rich Text Format" msgstr "Scheme" #: data/ruby.xml:33 msgid "" "_: Language\n" "Ruby" msgstr "Ruby" #: data/rust.xml:37 #, fuzzy msgid "" "_: Language\n" "Rust" msgstr "Ruby" #: data/sather.xml:3 msgid "" "_: Language\n" "Sather" msgstr "Sather" #: data/scala.xml:3 #, fuzzy msgid "" "_: Language\n" "Scala" msgstr "Stata" #: data/scheme.xml:43 msgid "" "_: Language\n" "Scheme" msgstr "Scheme" #: data/sci.xml:3 msgid "" "_: Language\n" "scilab" msgstr "scilab" #: data/scss.xml:28 #, fuzzy msgid "" "_: Language\n" "SCSS" msgstr "CSS" #: data/sed.xml:3 #, fuzzy msgid "" "_: Language\n" "sed" msgstr "Ada" #: data/sgml.xml:3 msgid "" "_: Language\n" "SGML" msgstr "SGML" #: data/sieve.xml:4 msgid "" "_: Language\n" "Sieve" msgstr "Sieve" #: data/sisu.xml:3 #, fuzzy msgid "" "_: Language\n" "SiSU" msgstr "CSS" #: data/sml.xml:3 msgid "" "_: Language\n" "SML" msgstr "SML" #: data/spice.xml:4 msgid "" "_: Language\n" "Spice" msgstr "Spice" #: data/sql-mysql.xml:8 msgid "" "_: Language\n" "SQL (MySQL)" msgstr "SQL (MySQL)" #: data/sql-oracle.xml:4 #, fuzzy msgid "" "_: Language\n" "SQL (Oracle)" msgstr "SQL (PostgreSQL)" #: data/sql-postgresql.xml:4 msgid "" "_: Language\n" "SQL (PostgreSQL)" msgstr "SQL (PostgreSQL)" #: data/sql.xml:6 msgid "" "_: Language\n" "SQL" msgstr "SQL" #: data/stata.xml:3 msgid "" "_: Language\n" "Stata" msgstr "Stata" #: data/systemc.xml:10 #, fuzzy msgid "" "_: Language\n" "SystemC" msgstr "C" #: data/systemverilog.xml:42 #, fuzzy msgid "" "_: Language\n" "SystemVerilog" msgstr "Verilog" #: data/tads3.xml:5 #, fuzzy msgid "" "_: Language\n" "TADS 3" msgstr "ASP" #: data/taskjuggler.xml:14 #, fuzzy msgid "" "_: Language\n" "TaskJuggler" msgstr "Haskell" #: data/tcl.xml:31 msgid "" "_: Language\n" "Tcl/Tk" msgstr "Tcl/Tk" #: data/tcsh.xml:11 #, fuzzy msgid "" "_: Language\n" "Tcsh" msgstr "Bash" #: data/texinfo.xml:3 #, fuzzy msgid "" "_: Language\n" "Texinfo" msgstr "Inform" #: data/textile.xml:18 #, fuzzy msgid "" "_: Language\n" "Textile" msgstr "Lex/Flex" #: data/tibasic.xml:3 msgid "" "_: Language\n" "TI Basic" msgstr "TI Basic" #: data/txt2tags.xml:6 msgid "" "_: Language\n" "txt2tags" msgstr "txt2tags" #: data/uscript.xml:3 msgid "" "_: Language\n" "UnrealScript" msgstr "UnrealScript" #: data/valgrind-suppression.xml:3 #, fuzzy msgid "" "_: Language\n" "Valgrind Suppression" msgstr "ColdFusion" #: data/varnish.xml:3 #, fuzzy msgid "" "_: Language\n" "Varnish Configuration Language" msgstr "Apache 組態" #: data/varnishtest.xml:3 #, fuzzy msgid "" "_: Language\n" "Varnish Test Case language" msgstr "E 語言" #: data/vcard.xml:5 msgid "" "_: Language\n" "vCard, vCalendar, iCalendar" msgstr "" #: data/velocity.xml:3 msgid "" "_: Language\n" "Velocity" msgstr "Velocity" #: data/vera.xml:42 #, fuzzy msgid "" "_: Language\n" "Vera" msgstr "Perl" #: data/verilog.xml:3 msgid "" "_: Language\n" "Verilog" msgstr "Verilog" #: data/vhdl.xml:14 msgid "" "_: Language\n" "VHDL" msgstr "VHDL" #: data/vrml.xml:3 msgid "" "_: Language\n" "VRML" msgstr "VRML" #: data/winehq.xml:3 msgid "" "_: Language\n" "WINE Config" msgstr "WINE 設定" #: data/wml.xml:57 #, fuzzy msgid "" "_: Language\n" "Wesnoth Markup Language" msgstr "E 語言" #: data/xharbour.xml:3 msgid "" "_: Language\n" "xHarbour" msgstr "xHarbour" #: data/xml.xml:9 msgid "" "_: Language\n" "XML" msgstr "XML" #: data/xmldebug.xml:3 msgid "" "_: Language\n" "XML (Debug)" msgstr "XML (除錯)" #: data/xonotic-console.xml:3 #, fuzzy msgid "" "_: Language\n" "Xonotic Script" msgstr "PostScript" #: data/xorg.xml:3 #, fuzzy msgid "" "_: Language\n" "x.org Configuration" msgstr "Apache 組態" #: data/xslt.xml:55 msgid "" "_: Language\n" "xslt" msgstr "xslt" #: data/xul.xml:7 #, fuzzy msgid "" "_: Language\n" "XUL" msgstr "XML" #: data/yacas.xml:3 msgid "" "_: Language\n" "yacas" msgstr "yacas" #: data/yacc.xml:28 msgid "" "_: Language\n" "Yacc/Bison" msgstr "Yacc/Bison" #: data/yaml.xml:4 #, fuzzy msgid "" "_: Language\n" "YAML" msgstr "SML" #: data/zonnon.xml:3 #, fuzzy msgid "" "_: Language\n" "Zonnon" msgstr "Mason" #: data/zsh.xml:11 #, fuzzy msgid "" "_: Language\n" "Zsh" msgstr "Bash"