# translation of tdefilereplace.po to Chinese Traditional # traditional Chinese translation of tdefilereplace. # # Stanley Wong, 2006. # Frank Weng (a.k.a. Franklin) , 2007. msgid "" msgstr "" "Project-Id-Version: tdefilereplace\n" "POT-Creation-Date: 2022-09-19 18:20+0000\n" "PO-Revision-Date: 2007-03-27 15:07+0800\n" "Last-Translator: Frank Weng (a.k.a. Franklin) \n" "Language-Team: Chinese Traditional \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #. Instead of a literal translation, add your name to the end of the list (separated by a comma). msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "Stanley Wong" #. Instead of a literal translation, add your email to the end of the list (separated by a comma). msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "stanley18fan0k@yahoo.com.hk" #: configurationclasses.cpp:173 msgid " Line:%3,Col:%4 - \"%1\" -> \"%2\"" msgstr " 行：%3，字：%4 - \"%1\" -> \"%2\"" #: knewprojectdlg.cpp:99 msgid "Project Directory" msgstr "專案目錄" #: knewprojectdlg.cpp:119 msgid "You must fill the combo boxes (location and filter) before continuing." msgstr "您需要填上空格(位置及過濾)才可以繼續。" #: knewprojectdlg.cpp:127 msgid "Some edit boxes are empty in the Owner page." msgstr "擁有者的頁面中有一些空格未填上。" #: knewprojectdlg.cpp:137 msgid "The minimum size is greater than the maximum size." msgstr "下限大小比上限大小更大。" #: main.cpp:25 msgid "Batch search and replace tool" msgstr "批次搜尋及取代工具" #: main.cpp:31 msgid "Starting folder" msgstr "開始的目錄" #: main.cpp:37 #, fuzzy msgid "TDEFileReplace" msgstr "KFileReplace" #: main.cpp:38 tdefilereplacepart.cpp:455 #, fuzzy msgid "Part of the TDEUtils module." msgstr "TDEUtils 模組的一部份。" #: main.cpp:41 msgid "Shell author, KPart creator, co-maintainer" msgstr "Shell 作者，KPart 原創者，合作維護人員" #: main.cpp:42 tdefilereplacepart.cpp:460 msgid "Current maintainer, code cleaner and rewriter" msgstr "目前的維護人員" #: main.cpp:44 tdefilereplacepart.cpp:457 #, fuzzy msgid "Original author of the TDEFileReplace tool" msgstr "KFileReplace 工具的原作者" #: report.cpp:41 report.cpp:194 msgid "Cannot open the file %1." msgstr "無法開啟檔案 %1。" #: report.cpp:54 msgid "Replaced Strings" msgstr "被取代的字串" #: report.cpp:55 msgid "Replace with" msgstr "取代為" #: report.cpp:59 msgid "Total number occurrences" msgstr "總共出現次數" #: report.cpp:60 msgid "-" msgstr "-" #: report.cpp:68 #, fuzzy msgid "TDEFileReplace Report" msgstr "KFileReplace 報告" #: report.cpp:73 msgid "Searching/Replacing Strings Table" msgstr "搜尋/取代字串表格" #: report.cpp:76 msgid "Search for" msgstr "搜尋" #: report.cpp:111 msgid "Results Table" msgstr "結果表格" #: knewprojectdlgs.ui:513 knewprojectdlgs.ui:594 report.cpp:114 #: tdefilereplaceviewwdg.ui:58 tdefilereplaceviewwdg.ui:181 #, no-c-format msgid "Name" msgstr "名稱" #: report.cpp:115 tdefilereplaceviewwdg.ui:69 tdefilereplaceviewwdg.ui:192 #, no-c-format msgid "Folder" msgstr "資料夾" #: report.cpp:118 tdefilereplaceviewwdg.ui:203 #, no-c-format msgid "Size" msgstr "大小" #: report.cpp:122 tdefilereplaceviewwdg.ui:80 #, no-c-format msgid "Old Size" msgstr "以往大小" #: report.cpp:123 tdefilereplaceviewwdg.ui:91 #, no-c-format msgid "New Size" msgstr "新大小" #: report.cpp:126 tdefilereplaceviewwdg.ui:113 tdefilereplaceviewwdg.ui:225 #, no-c-format msgid "Owner User" msgstr "擁有者用戶" #: report.cpp:127 tdefilereplaceviewwdg.ui:124 tdefilereplaceviewwdg.ui:236 #, no-c-format msgid "Owner Group" msgstr "擁有者群組" #: report.cpp:201 msgid "Created by" msgstr "建立者" #: report.cpp:203 msgid "date" msgstr "日期" #: report.cpp:205 msgid "Total occurrences" msgstr "總共出現次數" #: tdefilereplace.cpp:49 #, fuzzy msgid "Could not find the TDEFileReplace part." msgstr "找不到 KFileReplace part。" #: tdefilereplacelib.cpp:74 #, c-format msgid "" "_n: 1 byte\n" "%n bytes" msgstr "%n 位元組" #: tdefilereplacelib.cpp:80 msgid "%1 KB" msgstr "%1 KB" #: tdefilereplacelib.cpp:86 msgid "%1 MB" msgstr "%1 MB" #: tdefilereplacelib.cpp:92 msgid "%1 GB" msgstr "%1 GB" #: tdefilereplacepart.cpp:106 msgid "Ready." msgstr "準備好。" #: tdefilereplacepart.cpp:158 msgid "Search completed." msgstr "搜尋完畢。" #: tdefilereplacepart.cpp:171 msgid "" "You have selected %1 as the encoding of the files.
Selecting " "the correct encoding is very important as if you have files that have some " "other encoding than the selected one, after a replace you may damage those " "files.

In case you do not know the encoding of your files, select " "utf8 and enable the creation of backup files. This setting " "will autodetect utf8 and utf16 files, but the changed files " "will be converted to utf8." msgstr "" "您已經選擇了 %1 作為檔案的編碼。
選擇正確的編碼是非常重要的。如" "果檔案的編碼與選擇的不相符，那麼在作取代之後很有可能會導致檔案損壞。

" "若您不清楚檔案的編碼，請選擇 utf8 並啟用副本的建立。這個設定會" "自動偵測 utf8 及 utf16 的檔案，但是有更動的檔案會被轉換成 " "utf8。" #: tdefilereplacepart.cpp:171 msgid "File Encoding Warning" msgstr "檔案編碼警告" #: tdefilereplacepart.cpp:180 msgid "Replacing files (simulation)..." msgstr "正在取代檔案(模擬)..." #: tdefilereplacepart.cpp:181 msgid "Replaced strings (simulation)" msgstr "已取代的字串(模擬)" #: tdefilereplacepart.cpp:185 msgid "Replacing files..." msgstr "正在取代檔案..." #: tdefilereplacepart.cpp:186 msgid "Replaced strings" msgstr "已取代的字串" #: tdefilereplacepart.cpp:242 msgid "Stopping..." msgstr "正在停止..." #: tdefilereplacepart.cpp:256 msgid "There are no results to save: the result list is empty." msgstr "沒有結果要被儲存：結果的列表是空的。" #: tdefilereplacepart.cpp:260 msgid "Save Report" msgstr "儲存報告" #: tdefilereplacepart.cpp:270 msgid "A folder or a file named %1 already exists." msgstr "資料夾或檔案 %1 已經存在。" #: tdefilereplacepart.cpp:278 msgid "Cannot create the %1 folder." msgstr "無法建立 %1 目錄。" #: tdefilereplacepart.cpp:451 #, fuzzy msgid "TDEFileReplacePart" msgstr "KFileReplacePart" #: tdefilereplacepart.cpp:453 msgid "Batch search and replace tool." msgstr "批次搜尋及取代工具。" #: tdefilereplacepart.cpp:463 msgid "Co-maintainer, KPart creator" msgstr "合作維護人員，KPart ，原創者" #: tdefilereplacepart.cpp:466 msgid "Original german translator" msgstr "原德文譯者" #: tdefilereplacepart.cpp:476 #, fuzzy msgid "Sorry, currently the TDEFileReplace part works only for local files." msgstr "對不起，目前 KFileReplace part 只能處理本地檔案。" #: tdefilereplacepart.cpp:476 msgid "Non Local File" msgstr "非本地檔案" #: tdefilereplacepart.cpp:512 msgid "Customize Search/Replace Session..." msgstr "自訂搜尋/取代工作階段..." #: tdefilereplacepart.cpp:513 msgid "&Search" msgstr "搜尋(&S)" #: tdefilereplacepart.cpp:514 msgid "S&imulate" msgstr "模擬(&I)" #: tdefilereplacepart.cpp:515 msgid "&Replace" msgstr "取代(&R)" #: tdefilereplacepart.cpp:516 msgid "Sto&p" msgstr "停止(&P)" #: tdefilereplacepart.cpp:517 msgid "Cre&ate Report File..." msgstr "建立報告檔案(&A)..." #: tdefilereplacepart.cpp:518 #, fuzzy #| msgid "&Save Strings List to File..." msgid "&Save Results List to File..." msgstr "儲存字串列表至檔案(&S)..." #: tdefilereplacepart.cpp:519 #, fuzzy #| msgid "&Load Strings List From File..." msgid "&Load Results List From File..." msgstr "從檔案載入字串列表(&L)..." #: tdefilereplacepart.cpp:522 msgid "&Add String..." msgstr "加入字串(&A)..." #: tdefilereplacepart.cpp:523 msgid "&Delete String" msgstr "刪除字串(&D)" #: tdefilereplacepart.cpp:524 msgid "&Empty Strings List" msgstr "空白的字串列表(&E)" #: tdefilereplacepart.cpp:525 msgid "&Save Strings List to File..." msgstr "儲存字串列表至檔案(&S)..." #: tdefilereplacepart.cpp:526 msgid "&Load Strings List From File..." msgstr "從檔案載入字串列表(&L)..." #: tdefilereplacepart.cpp:527 msgid "&Invert Current String (search <--> replace)" msgstr "倒轉目前字串狀態的位置 (搜尋 <--> 取代)(&I)" #: tdefilereplacepart.cpp:528 msgid "&Invert All Strings (search <--> replace)" msgstr "倒轉所有字串狀態的位置 (搜尋 <--> 取代)(&I)" #: tdefilereplacepart.cpp:531 msgid "&Include Sub-Folders" msgstr "包括子目錄(&I)" #: tdefilereplacepart.cpp:532 msgid "Create &Backup Files" msgstr "建立備份檔案(&B)" #: tdefilereplacepart.cpp:533 msgid "Case &Sensitive" msgstr "區分大小寫(&S)" #: tdefilereplacepart.cpp:534 msgid "Enable Commands &in Replace String: [$command:option$]" msgstr "取代文字中允許使用命令：[$command:opt&ion$]" #: tdefilereplacepart.cpp:535 msgid "Enable &Regular Expressions" msgstr "啟用正規表示式(&R)" #: tdefilereplacepart.cpp:536 #, fuzzy msgid "Configure &TDEFileReplace..." msgstr "設定 &KFileReplace..." #: tdefilereplacepart.cpp:539 tdefilereplaceview.cpp:799 msgid "&Properties" msgstr "屬性(&P)" #: tdefilereplacepart.cpp:540 tdefilereplaceview.cpp:769 msgid "&Open" msgstr "開啟(&O)" #: tdefilereplacepart.cpp:541 tdefilereplaceview.cpp:773 msgid "Open &With..." msgstr "開啟用(&W)..." #: tdefilereplacepart.cpp:544 tdefilereplaceview.cpp:780 msgid "&Edit in Quanta" msgstr "以 Quanta 編輯" #: tdefilereplacepart.cpp:546 tdefilereplaceview.cpp:786 msgid "Open Parent &Folder" msgstr "開啟母目錄(&F)" #: tdefilereplacepart.cpp:547 tdefilereplaceview.cpp:790 msgid "Remove &Entry" msgstr "" #: tdefilereplacepart.cpp:549 msgid "E&xpand Tree" msgstr "展開樹狀(&X)" #: tdefilereplacepart.cpp:550 msgid "&Reduce Tree" msgstr "摺叠樹狀(&R)" #: tdefilereplacepart.cpp:553 #, fuzzy msgid "&About TDEFileReplace" msgstr "關於 KFileRepl&ace" #: tdefilereplacepart.cpp:554 #, fuzzy msgid "TDEFileReplace &Handbook" msgstr "KFileReplace 手冊(&H)" #: tdefilereplacepart.cpp:555 msgid "&Report Bug" msgstr "報告錯誤(&R)" #: tdefilereplacepart.cpp:930 msgid "" "It seems you have a circular reference in your file system.The search has " "been limited to this sublevel to preventTDEFileReplace from crashing." msgstr "" #: tdefilereplacepart.cpp:933 tdefilereplacepart.cpp:1270 msgid "Circular reference detected" msgstr "" #: tdefilereplacepart.cpp:997 tdefilereplacepart.cpp:1085 #: tdefilereplacepart.cpp:1327 msgid "Cannot open file %1 for reading." msgstr "無法開啟檔案 %1 作讀取。" #: tdefilereplacepart.cpp:1036 tdefilereplacepart.cpp:1114 msgid "Cannot open file %1 for writing." msgstr "無法開啟檔案 %1 作寫入。" #: tdefilereplacepart.cpp:1171 msgid "" "Do you want to replace the string %1 with the string %2?" msgstr "您要把字串 %1 取代為 %2 嗎?" #: tdefilereplacepart.cpp:1172 msgid "Confirm Replace" msgstr "取代確認" #: tdefilereplacepart.cpp:1174 msgid "Do Not Replace" msgstr "不要取代" #: tdefilereplacepart.cpp:1267 msgid "" "It seems you have a circular reference in your file system. The search has " "been limited to this sublevel to prevent TDEFileReplace from crashing." msgstr "" #: tdefilereplacepart.cpp:1398 tdefilereplacepart.cpp:1438 #, fuzzy #| msgid " Line:%2, Col:%3 - \"%1\"" msgid "Line:%2, Col:%3 - \"%1\"" msgstr " 行：%2，字：%3 - \"%1\"" #: tdefilereplacepart.cpp:1537 msgid "There are no strings to search and replace." msgstr "沒有字串要被搜尋及取代。" #: tdefilereplacepart.cpp:1550 msgid "The main folder of the project %1 does not exist." msgstr "專案的主目錄 %1 並不存在。" #: tdefilereplacepart.cpp:1558 msgid "Access denied in the main folder of the project:
%1" msgstr "專案的主目錄存取被拒：
%1" #: tdefilereplaceview.cpp:156 msgid "" "Cannot invert string %1, because the search string would be empty." "" msgstr "" "無法倒轉字串 %1 狀態的位置，因為這樣做的話搜尋字串會變成空白。" #: tdefilereplaceview.cpp:309 msgid "File %1 cannot be opened. Might be a DCOP problem." msgstr "無法開啟檔案 %1。可能是 DCOP 的問題。" #: tdefilereplaceview.cpp:340 msgid "Do you really want to delete %1?" msgstr "您真的要刪除 %1 嗎?" #: tdefilereplaceview.cpp:372 tdefilereplaceview.cpp:481 #, fuzzy msgid "TDEFileReplace Results" msgstr "KFileReplace 報告" #: tdefilereplaceview.cpp:372 tdefilereplaceview.cpp:481 #: tdefilereplaceview.cpp:591 tdefilereplaceview.cpp:674 msgid "All Files" msgstr "所有檔案" #: tdefilereplaceview.cpp:373 #, fuzzy #| msgid "Load Strings From File" msgid "Load Results From File" msgstr "從檔案載入字串" #: tdefilereplaceview.cpp:384 #, fuzzy #| msgid "Cannot open the file %1 and load the string list." msgid "Cannot open the file %1 and load the results list." msgstr "無法開啟檔案 %1 並載入字串列表。" #: tdefilereplaceview.cpp:392 #, fuzzy #| msgid "Cannot open file %1 for reading." msgid "File %1 seems not to be valid." msgstr "無法開啟檔案 %1 作讀取。" #: tdefilereplaceview.cpp:405 msgid "" "Missing search type. Is this a search-and-replace list of results?" msgstr "" #: tdefilereplaceview.cpp:476 #, fuzzy #| msgid "There are no results to save: the result list is empty." msgid "There are no results to save." msgstr "沒有結果要被儲存：結果的列表是空的。" #: tdefilereplaceview.cpp:482 #, fuzzy #| msgid "Save Strings to File" msgid "Save Results to File" msgstr "儲存字串至檔案" #: tdefilereplaceview.cpp:491 tdefilereplaceview.cpp:684 msgid "File %1 cannot be saved." msgstr "無法儲存檔案 %1。" #: tdefilereplaceview.cpp:591 #, fuzzy msgid "TDEFileReplace strings" msgstr "KFileReplace 字串" #: tdefilereplaceview.cpp:592 msgid "Load Strings From File" msgstr "從檔案載入字串" #: tdefilereplaceview.cpp:603 msgid "Cannot open the file %1 and load the string list." msgstr "無法開啟檔案 %1 並載入字串列表。" #: tdefilereplaceview.cpp:611 msgid "File %1 seems not to be written in a valid kfr format." msgstr "" #: tdefilereplaceview.cpp:624 msgid "" "Missing search type. Is this a search-and-replace list of strings?" msgstr "" #: tdefilereplaceview.cpp:669 msgid "No strings to save as the list is empty." msgstr "沒有字串要被儲存，因為列表是空的。" #: tdefilereplaceview.cpp:674 #, fuzzy msgid "TDEFileReplace Strings" msgstr "KFileReplace 字串" #: tdefilereplaceview.cpp:675 msgid "Save Strings to File" msgstr "儲存字串至檔案" #: whatthis.h:29 msgid "" "Shows the statistics of your operations. Note that the columns content " "changes depending on what kind of operation you are performing." msgstr "顯示您操作的統計。注意欄位內容的改變會依據您所執行的動作種類而定。" #: whatthis.h:31 msgid "" "Shows a list of strings to search for (and if you specified it, a list of " "strings to replace with). Use the \"add strings\" dialog to edit your string " "list or double click on a string." msgstr "" "顯示搜尋的字串清單（以及要取代的字串清單，如果您有指定的話）。用「加入字串」" "對話框，或是在字串上雙擊來編輯您的字串清單。" #: whatthis.h:34 msgid "" "Base folder for operations of search/replace. Insert path string here by " "hand or use the search button." msgstr "" "搜尋/取代時的基底資料夾。您可以手動在此插入路徑的字串，或是使用搜尋按鍵。" #: whatthis.h:36 msgid "Shell-like wildcards. Example: \"*.html;*.txt;*.xml\"." msgstr "類似 shell 中的萬用字元。如 *.html，*.txt，*.xml 等。" #: whatthis.h:38 msgid "" "Insert the minimum file size you want to search, or leave it unchecked if " "you don't want minimum size limit." msgstr "" "在此插入您要搜尋的最小檔案大小。若您不打算限制最小檔案大小，則不要勾選。" #: whatthis.h:40 msgid "" "Insert the maximum file size you want to search, or leave it unchecked if " "you don't want maximum size limit." msgstr "" "在此插入您要搜尋的最大檔案大小。若您不打算限制最大檔案大小，則不要勾選。" #: whatthis.h:42 #, fuzzy msgid "" "Insert the maximum depth sublevel you want to search, or leave it unchecked " "if you don't want to limit the search. A level of 0 searches only the " "current level." msgstr "" "在此插入您要搜尋的最大檔案大小。若您不打算限制最大檔案大小，則不要勾選。" #: whatthis.h:44 msgid "" "Insert the minimum value for file access date that you want to search, or " "leave it unchecked if you don't a minimum limit." msgstr "" "在此插入您要搜尋的最小檔案存取日期。若您不打算限制最小檔案存取日期，則不要勾" "選。" #: whatthis.h:46 msgid "" "Insert the maximum value for file access date that you want to search, or " "leave it unchecked if you don't a maximum limit." msgstr "" "在此插入您要搜尋的最大檔案存取日期。若您不打算限制最大檔案存取日期，則不要勾" "選。" #: whatthis.h:48 msgid "" "Select \"writing\" if you want to use the date of the last modification, " "or \"reading\" to use the the date of the last access." msgstr "" "選擇「寫入」使用檔案的最近變更日期，或是「讀取」使用檔案的最近存取日期。" #: whatthis.h:50 msgid "Minimum value for access date." msgstr "存取日期的最小值。" #: whatthis.h:52 msgid "Maximum value for access date." msgstr "存取日期的最大值。" #: whatthis.h:54 msgid "Insert here the string to search for." msgstr "在此插入要搜尋的字串。" #: whatthis.h:56 msgid "Insert here the string to replace with." msgstr "在此插入要取代的字串。" #: whatthis.h:59 msgid "Enable this option if your search is case sensitive." msgstr "如果搜尋要區分大小寫，則開啟此選項。" #: whatthis.h:61 msgid "Enable this option to search in sub folders too." msgstr "如果要同時搜尋子資料夾，則開啟此選項。" #: whatthis.h:63 msgid "" "Enable this option when you are searching for a string and you are only " "interested to know if the string is present or not in the current file." msgstr "如果您只要知道您搜尋的字串是否有出現在目前檔案中，則開啟此選項。" #: whatthis.h:67 msgid "" "If tdefilereplace encounters a symbolic link treats it like a normal folder " "or file." msgstr "如果 tdefilereplace 遇到符號連結，則當成一般正常的資料夾或檔案。" #: whatthis.h:69 msgid "Enable this option to ignore hidden files or folders." msgstr "開啟此選項以忽略隱藏的檔案及資料夾。" #: whatthis.h:71 msgid "" "If this option is enabled, KFR will show even the names of the files in " "which no string has been found or replaced." msgstr "" "開啟此選項的話，即使沒有在檔案中找到或取代字串，tdefilereplace 也會顯示其名" "稱。" #: whatthis.h:73 msgid "" "Allows you to apply TQt-like regular expressions on the search string. Note " "that a complex regular expression could affect speed performance" msgstr "" "讓您可以使用 QT 式的正規表示式來表示搜尋字串。注意，如果正規表示式太過複雜，" "會影響效率與速度。" #: whatthis.h:75 msgid "" "Enable \"commands\". For example: if search string is \"user\" and replace " "string is the command \"[$user:uid$]\", KFR will substitute \"user\" with " "the uid of the user." msgstr "" "開啟「指令」模式。例如，如果搜尋字串是「user」，並且取代字串設為 \"[$user:uid" "$]\"，tdefilereplace 會將 \"user\" 置換為該使用者的使用者代碼（uid）。" #: whatthis.h:77 msgid "Enable this option if you want leave original files untouched." msgstr "開啟此選項以保留原始檔案不要做修改。" #: whatthis.h:79 msgid "" "Enable this option if you want to be asked for single string replacement " "confirmation." msgstr "如果您在每個取代前都要確認，則開啟此選項" #: whatthis.h:82 msgid "" "Enable this option to perform replacing as a simulation, i.e. without make " "any changes in files." msgstr "開啟此選項以模擬取代，也就是實際上不做任何變動。" #: whatthis.h:95 msgid "Select search-only mode." msgstr "選擇只搜尋模式。" #: whatthis.h:97 msgid "Select search-and-replace mode." msgstr "選擇搜尋與取代模式。" #: whatthis.h:99 msgid "Insert here a string you want search for." msgstr "在此插入您要搜尋的字串。" #: whatthis.h:101 msgid "Insert here the string that KFR will use to replace the search string." msgstr "在此插入要用以取代搜尋字串的字串。" #: kaddstringdlgs.ui:16 #, no-c-format msgid "Insert Searching/Replacing Strings" msgstr "插入搜尋/取代的字串" #: kaddstringdlgs.ui:38 #, no-c-format msgid "Choose String Adding Mode" msgstr "選擇字串加入的模式" #: kaddstringdlgs.ui:52 #, no-c-format msgid "Search and replace mode" msgstr "搜尋 + 取代模式" #: kaddstringdlgs.ui:60 #, no-c-format msgid "Search only mode" msgstr "僅搜尋模式" #: kaddstringdlgs.ui:103 #, no-c-format msgid "Search for:" msgstr "尋找：" #: kaddstringdlgs.ui:132 #, no-c-format msgid "Replace with:" msgstr "取代為：" #: kaddstringdlgs.ui:267 kaddstringdlgs.ui:308 tdefilereplaceviewwdg.ui:306 #: tdefilereplaceviewwdg.ui:361 #, no-c-format msgid "Search For" msgstr "尋找" #: kaddstringdlgs.ui:319 tdefilereplaceviewwdg.ui:317 #, no-c-format msgid "Replace With" msgstr "取代為" #: knewprojectdlgs.ui:16 #, no-c-format msgid "Search & Replace in Files" msgstr "於檔案搜尋 & 取代" #: knewprojectdlgs.ui:89 #, no-c-format msgid "Search Now" msgstr "立即搜尋" #: knewprojectdlgs.ui:100 #, no-c-format msgid "Search Later" msgstr "稍後搜尋" #: knewprojectdlgs.ui:136 #, no-c-format msgid "&General" msgstr "一般(&G)" #: knewprojectdlgs.ui:147 #, no-c-format msgid "Startup Folder Options" msgstr "啟動目錄選項" #: knewprojectdlgs.ui:158 #, no-c-format msgid "Filter:" msgstr "過濾器：" #: knewprojectdlgs.ui:169 #, no-c-format msgid "Location:" msgstr "位置：" #: knewprojectdlgs.ui:206 #, no-c-format msgid "Insert a search path here. You can use the search path button." msgstr "請在這裏輸入搜尋路徑。您可以使用搜尋路徑的按鈕。" #: knewprojectdlgs.ui:254 #, no-c-format msgid "&Include subfolders" msgstr "包括子目錄(&I)" #: knewprojectdlgs.ui:265 #, no-c-format msgid "&Max depth" msgstr "" #: knewprojectdlgs.ui:307 #, no-c-format msgid "Search/Replace Strings" msgstr "搜尋/取代字串" #: knewprojectdlgs.ui:341 knewprojectdlgs.ui:372 #, fuzzy, no-c-format msgid "Insert a search string here." msgstr "在此插入要搜尋的字串。" #: knewprojectdlgs.ui:380 #, no-c-format msgid "Search:" msgstr "搜尋：" #: knewprojectdlgs.ui:388 #, no-c-format msgid "Replace:" msgstr "取代：" #: knewprojectdlgs.ui:398 koptionsdlgs.ui:45 #, no-c-format msgid "General Options" msgstr "一般選項" #: knewprojectdlgs.ui:412 #, no-c-format msgid "Enable ®ular expressions" msgstr "啟用正規表示式(&R)" #: knewprojectdlgs.ui:420 #, no-c-format msgid "Do &backup copy instead of overwrite" msgstr "建立一份副本而非覆寫(&B)" #: knewprojectdlgs.ui:428 #, no-c-format msgid "&Case sensitive" msgstr "區分大小寫(&C)" #: knewprojectdlgs.ui:436 #, no-c-format msgid "Enable co&mmands in the replace string" msgstr "在取代字串中允許使用命令(&M)" #: knewprojectdlgs.ui:444 koptionsdlgs.ui:64 #, no-c-format msgid "Backup copy suffix:" msgstr "副本前置文字：" #: knewprojectdlgs.ui:473 koptionsdlgs.ui:123 #, no-c-format msgid "Encoding of the files:" msgstr "檔案的編碼：" #: knewprojectdlgs.ui:485 koptionsdlgs.ui:148 #, no-c-format msgid "&Advanced" msgstr "進階(&A)" #: knewprojectdlgs.ui:496 #, no-c-format msgid "Ownership Filtering" msgstr "檔案擁有權過濾" #: knewprojectdlgs.ui:507 #, no-c-format msgid "User: " msgstr "使用者：" #: knewprojectdlgs.ui:518 knewprojectdlgs.ui:599 #, no-c-format msgid "ID (Number)" msgstr "ID (數字)" #: knewprojectdlgs.ui:540 knewprojectdlgs.ui:567 #, no-c-format msgid "Equals To" msgstr "等於" #: knewprojectdlgs.ui:545 knewprojectdlgs.ui:572 #, no-c-format msgid "Is Not" msgstr "並非" #: knewprojectdlgs.ui:623 #, no-c-format msgid "Group:" msgstr "群組：" #: knewprojectdlgs.ui:649 #, no-c-format msgid "Access Date Filtering" msgstr "存取日期過濾" #: knewprojectdlgs.ui:676 #, no-c-format msgid "Dates valid for:" msgstr "對於這些日期是有效的：" #: knewprojectdlgs.ui:684 #, no-c-format msgid "Accessed after:" msgstr "在這之前存取過：" #: knewprojectdlgs.ui:692 #, no-c-format msgid "Accessed before: " msgstr "在這之後存取過：" #: knewprojectdlgs.ui:708 #, no-c-format msgid "Last Writing Access" msgstr "上一次寫入" #: knewprojectdlgs.ui:713 #, no-c-format msgid "Last Reading Access" msgstr "上一次讀取" #: knewprojectdlgs.ui:821 #, no-c-format msgid "Size Filtering" msgstr "大小過濾" #: knewprojectdlgs.ui:848 #, no-c-format msgid "Minimum si&ze:" msgstr "下限大小(&Z)：" #: knewprojectdlgs.ui:856 #, no-c-format msgid "Maximum size:" msgstr "上限大小：" #: knewprojectdlgs.ui:906 knewprojectdlgs.ui:914 #, no-c-format msgid "KB" msgstr "KB" #: koptionsdlgs.ui:34 #, no-c-format msgid "General" msgstr "一般" #: koptionsdlgs.ui:56 #, no-c-format msgid "Enable commands in replace strings" msgstr "取代字串中允許使用命令" #: koptionsdlgs.ui:80 #, no-c-format msgid "Notif&y on errors" msgstr "有錯誤時提示(&Y)" #: koptionsdlgs.ui:88 #, no-c-format msgid "Case sensitive" msgstr "區分大小寫" #: koptionsdlgs.ui:96 #, no-c-format msgid "Recursive (search/replace in all sub folders)" msgstr "遞迴 (在所有子目錄中搜尋/取代)" #: koptionsdlgs.ui:107 #, no-c-format msgid "Enable regular e&xpressions" msgstr "啟用正規表示式(&X)" #: koptionsdlgs.ui:115 #, no-c-format msgid "Do &backup copy" msgstr "建立副本" #: koptionsdlgs.ui:159 #, no-c-format msgid "Advanced Options" msgstr "進階選項" #: koptionsdlgs.ui:170 #, no-c-format msgid "Ignore hidden files and folders" msgstr "忽略隱藏的檔案及資料夾" #: koptionsdlgs.ui:178 #, no-c-format msgid "Follow s&ymbolic links" msgstr "跟隨符號連結(&Y)" #: koptionsdlgs.ui:186 #, no-c-format msgid "When searching, stop on first string found (faster but no details)" msgstr "搜尋時，找到第一次符合的字串就停止(會快一些，但沒有詳細資料)" #: koptionsdlgs.ui:197 #, no-c-format msgid "Do not show file if no strings are found or replaced" msgstr "找不到/沒有取代到字串的話，不要顯示該檔案" #: koptionsdlgs.ui:233 #, no-c-format msgid "Show confirmation dialog" msgstr "顯示確認對話盒" #: koptionsdlgs.ui:246 #, no-c-format msgid "Confirm before replace each string" msgstr "取代字串之前先確認一下" #: koptionsdlgs.ui:287 #, no-c-format msgid "&Default Values" msgstr "預設值(&D)" #: tdefilereplacepartui.rc:4 tdefilereplaceui.rc:7 #, no-c-format msgid "Search/&Replace" msgstr "搜尋/取代(&R)" #: tdefilereplacepartui.rc:11 #, no-c-format msgid "&Strings" msgstr "字串(&S)" #: tdefilereplacepartui.rc:22 #, no-c-format msgid "&Results" msgstr "結果(&R)" #: tdefilereplacepartui.rc:57 #, fuzzy, no-c-format msgid "TDEFileReplace Main Toolbar" msgstr "KFileReplace 主工具列" #: tdefilereplaceviewwdg.ui:102 tdefilereplaceviewwdg.ui:214 #, no-c-format msgid "Matches" msgstr "" #: tdefilereplaceviewwdg.ui:427 #, no-c-format msgid "Green means ready" msgstr "綠色代表準備好" #: tdefilereplaceviewwdg.ui:430 #, no-c-format msgid "Ready" msgstr "準備好" #: tdefilereplaceviewwdg.ui:454 #, no-c-format msgid "Yellow means wait while sorting list" msgstr "黃色表示正在進行列表排序" #: tdefilereplaceviewwdg.ui:457 #, no-c-format msgid "Please wait while sorting list" msgstr "正在進行列表排序，請稍候" #: tdefilereplaceviewwdg.ui:478 #, no-c-format msgid "Red means scanning files" msgstr "紅色代表掃描檔案中" #: tdefilereplaceviewwdg.ui:513 #, fuzzy, no-c-format msgid "Scanned folders:" msgstr "已掃描的檔案：" #: tdefilereplaceviewwdg.ui:544 #, fuzzy, no-c-format msgid "Files:" msgstr "所有檔案" #~ msgid "" #~ "Cannot open the file %1 and load the string list. This file " #~ "seems not to be a valid old kfr file or it is broken." #~ msgstr "" #~ "無法開啟檔案 %1 並載入字串列表。這個檔案似乎不是一個有效的舊 " #~ "kfr 檔案或它已損壞。" #~ msgid "Cannot read data." #~ msgstr "無法讀取檔案。" #~ msgid "Out of memory." #~ msgstr "記憶體不足。" #~ msgid "Cannot open folders." #~ msgstr "無法開啟資料夾。" #~ msgid "Edit Selected String..." #~ msgstr "編輯選擇的字串..." #~ msgid "&Load Recent Strings Files" #~ msgstr "載入最近的字串檔案(&L)" #~ msgid "" #~ "File %1 seems not to be written in new kfr format. Remember " #~ "that the old kfr format will be soon abandoned. You can convert your old " #~ "rules files by simply saving them with tdefilereplace." #~ msgstr "" #~ "檔案 %1 似乎不是以新的 kfr 格式寫成。請注意舊 kfr 格式很快就會" #~ "被廢棄。您可以把它於 KFileReplace 內儲存一次，來達到轉換的效果。" #~ msgid "" #~ "The format of kfr files has been changed; attempting to load %1. Please see the KFilereplace manual for details. Do you want to load a " #~ "search-and-replace list of strings?" #~ msgstr "" #~ "kfr 檔案的格式已經改變；正在嘗試載入 %1。請參閱 KFilereplace 手" #~ "冊取得更多資訊。您要載入一個搜尋-取代字串的列表嗎?" #~ msgid "Load" #~ msgstr "載入" #~ msgid "Do Not Load" #~ msgstr "不要載入" #~ msgid "Found Strings" #~ msgstr "找到字串" #, fuzzy #~ msgid "Files" #~ msgstr "所有檔案" #, fuzzy #~ msgid "&Delete" #~ msgstr "刪除字串(&D)" #, fuzzy #~ msgid "Replace" #~ msgstr "取代：" #, fuzzy #~ msgid "&Cancel" #~ msgstr "進階(&A)" #, fuzzy #~ msgid "Options" #~ msgstr "一般選項" #, fuzzy #~ msgid "&Options" #~ msgstr "一般選項" #, fuzzy #~ msgid "&Settings" #~ msgstr "字串(&S)"