path: root/tde-i18n-zh_TW/messages/tdeadmin/kcmlilo.po

# traditional Chinese Translation of kcmlilo
# Copyright (C) 2001-2002 Free Software Foundation, Inc.
# Translator: Jing-Jong Shyue <shyue@sonoma.com.tw>, 2001.
#             Chao-Hsiung Liao <pesder.liao@msa.hinet.net>, 2002.
msgid ""
msgstr ""
"Project-Id-Version: kcmlilo\n"
"POT-Creation-Date: 2020-05-11 04:10+0200\n"
"PO-Revision-Date: 2005-12-08 10:11+0800\n"
"Last-Translator: Chao-Hsiung Liao <pesder.liao@msa.hinet.net>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8-bit\n"

#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Chao-Hsiung Liao"

#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "pesder.liao@msa.hinet.net"

#: kde-qt-common/EditWidget.cpp:43
msgid "Select..."
msgstr "選擇..."

#: kde-qt-common/expert.cpp:41
msgid ""
"You can edit the lilo.conf file directly here. All changes you make here are "
"automatically transferred to the graphical interface."
msgstr "您可以在這邊直接編輯 lilo.conf。所有的變更會自動傳遞到圖形介面中。"

#: kde-qt-common/general.cpp:45
msgid "Install &boot record to drive/partition:"
msgstr "安裝開機紀錄到磁碟/分割區(&B):"

#: kde-qt-common/general.cpp:55
msgid ""
"Select the drive or partition you want to install the LILO boot loader to "
"here. Unless you intend to use other boot managers in addition to LILO, this "
"should be the MBR (master boot record) of your boot drive.<br>In this case, "
"you should probably select <i>/dev/hda</i> if your boot drive is an IDE "
"drive or <i>/dev/sda</i> if your boot drive is SCSI."
msgstr ""
"在此選擇您想要安裝 LILO 啟動載入器的磁碟或分割區。除非您預備使用 LILO 以外的"
"啟動管理器，它應該被安裝在您的開機磁碟的 MBR (主要啟動紀錄) 中。<br>在這種狀"
"況下，如果您使用 IDE 磁碟，您應該會使用 <i>/dev/hda</i>；如果您使用 SCSI 磁"
"碟，使用 <i>/dev/sda</i>。"

#: kde-qt-common/general.cpp:58
msgid "Boot the default kernel/OS &after:"
msgstr "在...後啟動預設核心/作業系統(&A):"

#: kde-qt-common/general.cpp:60
msgid "/10 seconds"
msgstr "/10 秒"

#: kde-qt-common/general.cpp:64
msgid ""
"LILO will wait the amount of time specified here before booting the kernel "
"(or OS) marked as <i>default</i> in the <b>Images</b> tab."
msgstr ""
"LILO 將會等待在這邊指定的時間之後，自動啟動在<b>映像</b>分頁中標記為<i>預設</"
"i>的核心（或作業系統）。"

#: kde-qt-common/general.cpp:67
msgid "Use &linear mode"
msgstr "使用線性模式(&L)"

#: kde-qt-common/general.cpp:69
msgid ""
"Check this box if you want to use the linear mode.<br>Linear mode tells the "
"boot loader the location of kernels in linear addressing rather than sector/"
"head/cylinder.<br>linear mode is required for some SCSI drives, and "
"shouldn't hurt unless you're planning to create a boot disk to be used with "
"a different computer.<br>See the lilo.conf man page for details."
msgstr ""
"如果您要使用線性模式，核取此方塊。<br>線性模式會使啟動載入器以線性位置載入核"
"心而不用 CHS 方式。<br>對有些 SCSI 磁碟而言，線性模式是必須的。除非您要建立在"
"別台電腦上使用的開機磁碟，這也不會造成傷害。<br>詳細資料請參照 lilo.conf 手冊"
"頁。"

#: kde-qt-common/general.cpp:70
msgid "Use &compact mode"
msgstr "使用緊密模式(&C)"

#: kde-qt-common/general.cpp:72
msgid ""
"Check this box if you want to use the compact mode.<br>The compact mode "
"tries to merge read requests for adjacent sectors into a single read "
"request. This reduces load time and keeps the boot map smaller, but will not "
"work on all systems."
msgstr ""
"如果您要使用緊密模式，核取此方塊。<br>緊密模式嘗試將多個磁區的讀取合併成一次"
"讀取。這可以減少載入的時間並保持較小的啟動對應檔，但不是所有系統都能使用。"

#: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85
msgid "&Record boot command lines for defaults"
msgstr "預設紀錄開機指令行(&R)"

#: kde-qt-common/general.cpp:78
msgid ""
"Checking this box enables automatic recording of boot command lines as the "
"defaults for the following boots. This way, lilo \"locks\" on a choice until "
"it is manually overridden.\n"
"This sets the <b>lock</b> option in lilo.conf."
msgstr ""
"核取這個方塊以自動紀錄開機命令成為往後開機的預設值。這種方式會讓 LILO “鎖"
"定”這個選擇直到手動變更。\n"
"這會設定 lilo.conf 中的 <b>lock</b> 選項。"

#: kde-qt-common/general.cpp:79 kde/Details.cpp:84 qt/Details.cpp:87
msgid "R&estrict parameters"
msgstr "限制參數(&E)"

#: kde-qt-common/general.cpp:82
msgid ""
"If this box is checked, a password (entered below) is required only if any "
"parameters are changed (i.e. the user can boot <i>linux</i>, but not "
"<i>linux single</i> or <i>linux init=/bin/sh</i>).\n"
"This sets the <b>restricted</b> option in lilo.conf.<br>This sets a default "
"for all Linux kernels you want to boot. If you need a per-kernel setting, go "
"to the <i>Operating systems</i> tab and select <i>Details</i>."
msgstr ""
"如果核取這個方塊，要變更任何參數時，在下面輸入的密碼是必須的。也就是使用者可"
"以啟動 <i>linux</i> 但不能使用 <i>linux single</i> 或 <i>linux init=/bin/sh</"
"i>。\n"
"這會設定 lilo.conf 中的 <b>restricted</b> 選項。這個會影響所有的核心。如果您"
"希望在每個核心有不同的設定，請到 <i>作業系統</i> 分頁並選擇 <i>詳細資料</i>。"

#: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93
msgid "Require &password:"
msgstr "需要密碼(&P):"

#: kde-qt-common/general.cpp:93
msgid ""
"Enter the password required for bootup (if any) here. If <i>restricted</i> "
"above is checked, the password is required for additional parameters only."
"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
"You'll want to make sure nobody untrusted can read this file. Also, you "
"probably don't want to use your normal/root password here.<br>This sets a "
"default for all Linux kernels you want to boot. If you need a per-kernel "
"setting, go to the <i>Operating systems</i> tab and select <i>Details</i>."
msgstr ""
"在這邊輸入開機時需要的密碼。如果使用了上面的 <i>限制參數</i> 功能，必須要使用"
"這個密碼才能變更參數。<br><b>警告：</b> 這個密碼是以未編碼的方式存在 /etc/"
"lilo.conf 中。您必須確定未授權的人不能讀取這個檔案。同時，建議不要使用您的一"
"般/管理者密碼。<br>這個會影響所有的核心，如果您希望在每個核心有不同的設定，請"
"到 <i>作業系統</i> 分頁並使用 <i>詳細資料</i>。"

#: kde-qt-common/general.cpp:97
msgid "&Default graphics mode on text console:"
msgstr "在文字終端機上的預設圖形模式(&D):"

#: kde-qt-common/general.cpp:100
msgid ""
"You can select the default graphics mode here.<br>If you intend to use a VGA "
"graphics mode, you must compile the kernel with support for framebuffer "
"devices. The <i>ask</i> setting brings up a prompt at boot time.<br>This "
"sets a default for all Linux kernels you want to boot. If you need a per-"
"kernel setting, go to the <i>Operating systems</i> tab and select "
"<i>Details</i>."
msgstr ""
"您可以在這邊選擇預設的圖形模式。<br>如果您希望使用 VGA 圖形模式，您必須在編譯"
"核心時加入 framebuffer 的支援。選擇 <i>詢問</i> 將會在開機時詢問您。<p>這個會"
"影響所有的核心，如果您希望在每個核心有不同的設定，請到 <i>作業系統</i> 分頁並"
"使用 <i>詳細資料</i>。"

#: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48
msgid "default"
msgstr "預設"

#: kde-qt-common/general.cpp:102 kde/Details.cpp:49 qt/Details.cpp:49
msgid "ask"
msgstr "詢問"

#: kde-qt-common/general.cpp:103 kde/Details.cpp:50 qt/Details.cpp:50
msgid "text 80x25 (0)"
msgstr "文字 80x25 (0)"

#: kde-qt-common/general.cpp:104 kde/Details.cpp:51 qt/Details.cpp:51
msgid "text 80x50 (1)"
msgstr "文字 80x50 (1)"

#: kde-qt-common/general.cpp:105 kde/Details.cpp:52 qt/Details.cpp:52
msgid "text 80x43 (2)"
msgstr "文字 80x43 (2)"

#: kde-qt-common/general.cpp:106 kde/Details.cpp:53 qt/Details.cpp:53
msgid "text 80x28 (3)"
msgstr "文字 80x28 (3)"

#: kde-qt-common/general.cpp:107 kde/Details.cpp:54 qt/Details.cpp:54
msgid "text 80x30 (4)"
msgstr "文字 80x30 (4)"

#: kde-qt-common/general.cpp:108 kde/Details.cpp:55 qt/Details.cpp:55
msgid "text 80x34 (5)"
msgstr "文字 80x34 (5)"

#: kde-qt-common/general.cpp:109 kde/Details.cpp:56 qt/Details.cpp:56
msgid "text 80x60 (6)"
msgstr "文字 80x60 (6)"

#: kde-qt-common/general.cpp:110 kde/Details.cpp:57 qt/Details.cpp:57
msgid "text 40x25 (7)"
msgstr "文字 40x25 (7)"

#: kde-qt-common/general.cpp:111 kde/Details.cpp:58 qt/Details.cpp:58
msgid "VGA 640x480, 256 colors (769)"
msgstr "VGA 640x480, 256 色 (769)"

#: kde-qt-common/general.cpp:112 kde/Details.cpp:59 qt/Details.cpp:59
msgid "VGA 640x480, 32767 colors (784)"
msgstr "VGA 640x480, 32767 色 (784)"

#: kde-qt-common/general.cpp:113 kde/Details.cpp:60 qt/Details.cpp:60
msgid "VGA 640x480, 65536 colors (785)"
msgstr "VGA 640x480, 65536 色 (785)"

#: kde-qt-common/general.cpp:114 kde/Details.cpp:61 qt/Details.cpp:61
msgid "VGA 640x480, 16.7M colors (786)"
msgstr "VGA 640x480, 16.7M 色 (786)"

#: kde-qt-common/general.cpp:115 kde/Details.cpp:62 qt/Details.cpp:62
msgid "VGA 800x600, 256 colors (771)"
msgstr "VGA 800x600, 256 色 (771)"

#: kde-qt-common/general.cpp:116 kde/Details.cpp:63 qt/Details.cpp:63
msgid "VGA 800x600, 32767 colors (787)"
msgstr "VGA 800x600, 32767 色 (787)"

#: kde-qt-common/general.cpp:117 kde/Details.cpp:64 qt/Details.cpp:64
msgid "VGA 800x600, 65536 colors (788)"
msgstr "VGA 800x600, 65536 色 (788)"

#: kde-qt-common/general.cpp:118 kde/Details.cpp:65 qt/Details.cpp:65
msgid "VGA 800x600, 16.7M colors (789)"
msgstr "VGA 800x600, 16.7M 色 (789)"

#: kde-qt-common/general.cpp:119 kde/Details.cpp:66 qt/Details.cpp:66
msgid "VGA 1024x768, 256 colors (773)"
msgstr "VGA 1024x768, 256 色 (773)"

#: kde-qt-common/general.cpp:120 kde/Details.cpp:67 qt/Details.cpp:67
msgid "VGA 1024x768, 32767 colors (790)"
msgstr "VGA 1024x768, 32767 色 (790)"

#: kde-qt-common/general.cpp:121 kde/Details.cpp:68 qt/Details.cpp:68
msgid "VGA 1024x768, 65536 colors (791)"
msgstr "VGA 1024x768, 65536 色 (791)"

#: kde-qt-common/general.cpp:122 kde/Details.cpp:69 qt/Details.cpp:69
msgid "VGA 1024x768, 16.7M colors (792)"
msgstr "VGA 1024x768, 16.7M 色 (792)"

#: kde-qt-common/general.cpp:123 kde/Details.cpp:70 qt/Details.cpp:70
msgid "VGA 1280x1024, 256 colors (775)"
msgstr "VGA 1280x1024, 256 色 (775)"

#: kde-qt-common/general.cpp:124 kde/Details.cpp:71 qt/Details.cpp:71
msgid "VGA 1280x1024, 32767 colors (793)"
msgstr "VGA 1280x1024, 32767 色 (793)"

#: kde-qt-common/general.cpp:125 kde/Details.cpp:72 qt/Details.cpp:72
msgid "VGA 1280x1024, 65536 colors (794)"
msgstr "VGA 1280x1024, 65536 色 (794)"

#: kde-qt-common/general.cpp:126 kde/Details.cpp:73 qt/Details.cpp:73
msgid "VGA 1280x1024, 16.7M colors (795)"
msgstr "VGA 1280x1024, 16.7M 色 (795)"

#: kde-qt-common/general.cpp:130
msgid "Enter LILO &prompt automatically"
msgstr "自動進入 LILO 提示(&P)"

#: kde-qt-common/general.cpp:131
msgid ""
"If this box is checked, LILO goes to the LILO prompt whether or not a key is "
"pressed. If it is turned off, LILO boots the default operating system unless "
"shift is pressed (in that case, it goes to the LILO prompt).<br>This sets "
"the <i>prompt</i> option in lilo.conf."
msgstr ""
"如果核取這個方塊，不論是否有按下按鍵都會出現 LILO 提示。如果關閉， LILO 將會"
"啟動預設的作業系統，除非您按下“shift”（這樣就會進入 LILO 提示）。<br>這個會設"
"定 lilo.conf 中的 <i>prompt</i> 選項。"

#: kde-qt-common/images.cpp:53
msgid ""
"This is the list of kernels and operating systems you can currently boot. "
"Select which one you want to edit here."
msgstr "這是目前您可以啟動的核心與作業系統清單。請選擇您所要編輯的作業系統。"

#: kde-qt-common/images.cpp:59 kde-qt-common/images.cpp:281
msgid "&Kernel:"
msgstr "核心(&K):"

#: kde-qt-common/images.cpp:60 kde-qt-common/images.cpp:187
msgid "Enter the filename of the kernel you want to boot here."
msgstr "請在這邊輸入您要開機的核心檔案名稱。"

#: kde-qt-common/images.cpp:62 kde-qt-common/images.cpp:188
#: kde-qt-common/images.cpp:216
msgid "&Label:"
msgstr "標籤(&L):"

#: kde-qt-common/images.cpp:63 kde-qt-common/images.cpp:188
msgid "Enter the label (name) of the kernel you want to boot here."
msgstr "請在這邊輸入您要開機的核心的標籤（名稱）。"

#: kde-qt-common/images.cpp:65 kde-qt-common/images.cpp:189
msgid "&Root filesystem:"
msgstr "根檔案系統(&R):"

#: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189
msgid ""
"Enter the root filesystem (i.e. the partition that will be mounted as / at "
"boot time) for the kernel you want to boot here."
msgstr "請在這邊輸入您核心所需的根檔案系統（在開機時被掛載於 / 的分割區）。"

#: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190
msgid "&Initial ramdisk:"
msgstr "初始化記憶體磁碟(&I):"

#: kde-qt-common/images.cpp:69 kde-qt-common/images.cpp:190
msgid ""
"If you want to use an initial ramdisk (initrd) for this kernel, enter its "
"filename here. Leave this field blank if you don't intend to use an initial "
"ramdisk for this kernel."
msgstr ""
"如果您希望在這個核心上使用初始化記憶體磁碟(initrd)，請在這邊輸入檔案名稱。否"
"則請留下空白。"

#: kde-qt-common/images.cpp:71
msgid "E&xtra parameters:"
msgstr "額外參數(&X):"

#: kde-qt-common/images.cpp:72
msgid ""
"Enter any extra parameters you wish to pass to the kernel here. Usually, "
"this can be left blank.<br>This sets the <i>append</i> option in lilo.conf."
msgstr ""
"在這邊輸入任何您希望傳遞給核心的額外參數。通常您可以保留空白。<br>這會設定 "
"lilo.conf 中的<i>append</i>選項。"

#: kde-qt-common/images.cpp:79
msgid "Set &Default"
msgstr "設為預設值(&D)"

#: kde-qt-common/images.cpp:80
msgid "Boot this kernel/OS if the user doesn't make a different choice"
msgstr "如果使用者沒有另外指定，啟動這個核心/作業系統。"

#: kde-qt-common/images.cpp:82
msgid "De&tails"
msgstr "詳細資料(&T)"

#: kde-qt-common/images.cpp:83
msgid ""
"This button brings up a dialog box with further, less commonly used, options."
msgstr "這個按鈕開啟一些進階但較少使用的參數對話窗。"

#: kde-qt-common/images.cpp:85
msgid "&Probe"
msgstr "偵測(&P)"

#: kde-qt-common/images.cpp:87
msgid ""
"Automatically generate a (hopefully) reasonable lilo.conf for your system"
msgstr "自動產生一個適當的（希望如此） lilo.conf 給您的系統"

#: kde-qt-common/images.cpp:88
msgid "&Check Configuration"
msgstr "檢查組態設定(&C):"

#: kde-qt-common/images.cpp:90
msgid "Run LILO in test mode to see if the configuration is ok"
msgstr "以測試模式執行 LILO 以確定組態檔是正確的"

#: kde-qt-common/images.cpp:91
msgid "Add &Kernel..."
msgstr "增加核心(&K)..."

#: kde-qt-common/images.cpp:93
msgid "Add a new Linux kernel to the boot menu"
msgstr "增加新的 Linux 核心到開機選單"

#: kde-qt-common/images.cpp:94
msgid "Add Other &OS..."
msgstr "增加其他作業系統(&O)..."

#: kde-qt-common/images.cpp:96
msgid "Add a non-Linux OS to the boot menu"
msgstr "增加一個非 Linux 作業系統到開機選單"

#: kde-qt-common/images.cpp:97
msgid "&Remove Entry"
msgstr "移除項目(&R)"

#: kde-qt-common/images.cpp:99
msgid "Remove entry from the boot menu"
msgstr "從開機選單移除項目"

#: kde-qt-common/images.cpp:177
msgid "Configuration ok. LILO said:\n"
msgstr "組態正確。 LILO 說：\n"

#: kde-qt-common/images.cpp:178
msgid "Configuration OK"
msgstr "組態設定正確"

#: kde-qt-common/images.cpp:180
msgid "Configuration NOT ok. LILO said:\n"
msgstr "組態不正確。 LILO 說：\n"

#: kde-qt-common/images.cpp:181
msgid "Configuration NOT ok"
msgstr "組態設定不正確"

#: kde-qt-common/images.cpp:187
msgid "&Kernel filename:"
msgstr "核心檔案名稱(&K):"

#: kde-qt-common/images.cpp:215
msgid "Boot from dis&k:"
msgstr "從磁碟開機(&K):"

#: kde-qt-common/images.cpp:215
msgid ""
"Enter the partition containing the operating system you'd like to boot here."
msgstr "在這邊輸入包含您希望啟動之作業系統的分割區。"

#: kde-qt-common/images.cpp:216
msgid "Enter the label (name) of the operating system here."
msgstr "在這邊輸入作業系統的標籤（名稱）。"

#: kde-qt-common/images.cpp:297
msgid "Dis&k:"
msgstr "磁碟(&K):"

#: kde-qt-common/mainwidget.cpp:43
msgid "&General Options"
msgstr "一般選項(&G)"

#: kde-qt-common/mainwidget.cpp:44
msgid "&Operating Systems"
msgstr "作業系統(&O)"

#: kde-qt-common/mainwidget.cpp:45 kde-qt-common/mainwidget.cpp:65
#: kde-qt-common/mainwidget.cpp:94 kde-qt-common/mainwidget.cpp:100
msgid "&Expert"
msgstr "專家模式(&E)"

#: kde-qt-common/mainwidget.cpp:96 kde-qt-common/mainwidget.cpp:104
msgid "&General options"
msgstr "一般選項(&G)"

#: kde-qt-common/mainwidget.cpp:98 kde-qt-common/mainwidget.cpp:102
msgid "&Operating systems"
msgstr "作業系統(&O)"

#: kde/Details.cpp:44 qt/Details.cpp:44
msgid "&Graphics mode on text console:"
msgstr "在文字終端機上使用圖形模式(&G):"

#: kde/Details.cpp:47 qt/Details.cpp:47
msgid ""
"You can select the graphics mode for this kernel here.<br>If you intend to "
"use a VGA graphics mode, you must compile the kernel with support for "
"framebuffer devices. The <i>ask</i> setting brings up a prompt at boot time."
msgstr ""
"您可以在這邊選擇核心所使用的圖形模式。<br>如果您要使用 VGA 圖形模式，您必須在"
"編譯核心時加入 framebuffer 的支援。選擇 <i>詢問</i> 將會在開機時詢問您。"

#: kde/Details.cpp:75 qt/Details.cpp:76
msgid "Mount root filesystem &read-only"
msgstr "以唯讀方式掛載根檔案系統(&R)"

#: kde/Details.cpp:76 qt/Details.cpp:77
msgid ""
"Mount the root filesystem for this kernel read-only. Since the init scripts "
"normally take care of remounting the root filesystem in read-write mode "
"after running some checks, this should always be turned on.<br>Don't turn "
"this off unless you know what you're doing."
msgstr ""
"啟動這個核心時要以唯讀方式掛載的檔案系統。一般而言， init 命令稿會在一些檢查"
"之後，將根檔案系統重新掛載為讀寫模式，這應該要被開啟。<br>不要關閉這個功能除"
"非您非常確定。"

#: kde/Details.cpp:78 qt/Details.cpp:80
msgid "Do not check &partition table"
msgstr "不要檢查分割表(&P)"

#: kde/Details.cpp:79
msgid ""
"This turns off some sanity checks while writing the configuration. This "
"should not be used under \"normal\" circumstances, but it can be useful, for "
"example, by providing the capability of booting from a floppy disk, without "
"having a floppy in the drive every time you run lilo.<br>This sets the "
"<i>unsafe</i> keyword in lilo.conf."
msgstr ""
"這個功能關閉一些寫入設定檔時的檢查。在“一般”的情形下，這不應該被使用，但是這"
"仍是有用的，例如提供自軟碟開機的功能而不需要在每次執行 lilo 時放入軟碟片。"
"<br>這會設定 lilo.conf 中的 <i>unsafe</i> 關鍵字。"

#: kde/Details.cpp:83 qt/Details.cpp:86
msgid ""
"Checking this box enables automatic recording of boot command lines as the "
"default for the following bootups. This way, lilo \"locks\" on a choice "
"until it is manually overridden.<br>This sets the <b>lock</b> option in lilo."
"conf"
msgstr ""
"啟動這個功能以啟動自動紀錄開機指令的功能，並將之作為往後開機的預設值。這種方"
"式會讓 LILO “鎖定”這個選擇直到手動變更。<br>這會設定 lilo.conf 中的 <b>lock</"
"b> 選項。"

#: kde/Details.cpp:86 qt/Details.cpp:89
msgid ""
"If this box is checked, a password (entered below) is required only if any "
"parameters are changed (i.e. the user can boot <i>linux</i>, but not "
"<i>linux single</i> or <i>linux init=/bin/sh</i>).\n"
"This sets the <b>restricted</b> option in lilo.conf."
msgstr ""
"如果核取這個方塊，要變更任何參數時，在下面輸入的密碼是必須的。也就是使用者可"
"以啟動 <i>linux</i> 但不能使用 <i>linux single</i> 或 <i>linux init=/bin/sh</"
"i>。\n"
"這會設定 lilo.conf 中的 <b>restricted</b> 選項。"

#: kde/Details.cpp:94 qt/Details.cpp:98
msgid ""
"Enter the password required for bootup (if any) here. If <i>restricted</i> "
"above is checked, the password is required for additional parameters only."
"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
"You'll want to make sure nobody untrusted can read this file. Also, you "
"probably don't want to use your normal/root password here."
msgstr ""
"在這邊輸入開機時需要的密碼（如果有的話）。如果使用了上面的 <i>限制參數</i> 功"
"能，必須要使用這個密碼才能變更參數。<br><b>警告：</b> 這個密碼是以未編碼的方"
"式存在 /etc/lilo.conf 中。您必須確定未授權的人不能讀取這個檔案。同時，建議不"
"要使用您的一般/管理者密碼。"

#: kde/kcontrol.cpp:48
msgid "kcmlilo"
msgstr "kcmlilo"

#: kde/kcontrol.cpp:48
msgid "LILO Configuration"
msgstr "LILO 組態"

#: kde/kcontrol.cpp:50
msgid "(c) 2000, Bernhard Rosenkraenzer"
msgstr "(c) 2000, Bernhard Rosenkraenzer"

#: qt/Details.cpp:81
msgid ""
"This turns off some sanity checks while writing the configuration. This "
"shouldn't be used under \"normal\" circumstances, but it's useful, for "
"example, for installing the possibility to boot from a floppy disk without "
"having a floppy in the drive every time you run lilo.<br>This sets the "
"<i>unsafe</i> keyword in lilo.conf."
msgstr ""
"這個功能關閉一些寫入設定檔時的檢查，在“一般”的情形下，這不應該被使用。但是這"
"仍是有用的，例如提供自軟碟開機的功能而不需要在每次執行 lilo 時放入軟碟片。"
"<br>這會設定 lilo.conf 中的 <i>unsafe</i> 關鍵字。"

#: qt/standalone.cpp:41
msgid "&What's This?"
msgstr "這是什麼？(&W)"

#: qt/standalone.cpp:43
msgid ""
"The <i>What's This?</i> button is part of this program's help system. Click "
"on the What's This? button then on any widget in the window to get "
"information (like this) on it."
msgstr ""
"<i>這是什麼？</i> 按鈕是這個程式說明系統的一部份。按下這個按鈕以及任何程式元"
"件以取得像這樣的說明視窗。"

#: qt/standalone.cpp:47
msgid ""
"This button calls up the program's online help system. If it does nothing, "
"no help file has been written (yet); in that case, use the <i>What's This</"
"i> button on the left."
msgstr ""
"這個按鈕呼叫程式的線上說明系統。如果它沒有作用，是因為目前沒有說明檔案；此"
"時，請使用右邊的 <i>這是什麼？</i> 按鈕。"

#: qt/standalone.cpp:49
msgid "&Default"
msgstr "預設(&D)"

#: qt/standalone.cpp:50
msgid ""
"This button resets all parameters to some (hopefully sane) default values."
msgstr "這個按鈕重設所有的參數回預設值。"

#: qt/standalone.cpp:52
msgid "&Reset"
msgstr "重設(&R)"

#: qt/standalone.cpp:53
msgid ""
"This button resets all parameters to what they were before you started the "
"program."
msgstr "這個按鈕重設所有的參數回到您啟動此應用程式前的狀況。"

#: qt/standalone.cpp:56
msgid "This button saves all your changes without exiting."
msgstr "這個按鈕儲存您的設定但不關閉程式。"

#: qt/standalone.cpp:59
msgid "This button saves all your changes and exits the program."
msgstr "這個按鈕儲存您的設定並關閉程式。"

#: qt/standalone.cpp:62
msgid "This button exits the program without saving your changes."
msgstr "這個按鈕關閉程式而不儲存您的設定。"