summaryrefslogtreecommitdiffstats
path: root/kdm/config.def
diff options
context:
space:
mode:
Diffstat (limited to 'kdm/config.def')
-rw-r--r--kdm/config.def72
1 files changed, 36 insertions, 36 deletions
diff --git a/kdm/config.def b/kdm/config.def
index 64a6429ac..1dfb26ba6 100644
--- a/kdm/config.def
+++ b/kdm/config.def
@@ -182,7 +182,7 @@
</kdmrc>
# The contents of this section are copied into kdmrc-ref.docbook.
-# The macro %REF% is tqreplaced with the accumulated Description:s from the key
+# The macro %REF% is replaced with the accumulated Description:s from the key
# definitions below.
<docu>
<chapter id="kdm-files">
@@ -205,7 +205,7 @@ issue non-fatal error messages.</para>
are ignored as well.</para>
<para>Sections are denoted by
-<literal>[</literal><tqreplaceable>Name of Section</tqreplaceable><literal>]</literal>.
+<literal>[</literal><replaceable>Name of Section</replaceable><literal>]</literal>.
</para>
<para>You can configure every X-display individually.</para>
@@ -216,16 +216,16 @@ Additionally, a display belongs to a
display class (which can be ignored in most cases).</para>
<para>Sections with display-specific settings have the formal syntax
-<literal>[X-</literal>&nbsp;<tqreplaceable>host</tqreplaceable>&nbsp;[&nbsp;<literal>:</literal>&nbsp;<tqreplaceable>number</tqreplaceable>&nbsp;[&nbsp;<literal>_</literal>&nbsp;<tqreplaceable>class</tqreplaceable>&nbsp;]&nbsp;]&nbsp;<literal>-</literal>&nbsp;<tqreplaceable>sub-section</tqreplaceable>&nbsp;<literal>]</literal>
+<literal>[X-</literal>&nbsp;<replaceable>host</replaceable>&nbsp;[&nbsp;<literal>:</literal>&nbsp;<replaceable>number</replaceable>&nbsp;[&nbsp;<literal>_</literal>&nbsp;<replaceable>class</replaceable>&nbsp;]&nbsp;]&nbsp;<literal>-</literal>&nbsp;<replaceable>sub-section</replaceable>&nbsp;<literal>]</literal>
</para>
-<para>All sections with the same <tqreplaceable>sub-section</tqreplaceable>
+<para>All sections with the same <replaceable>sub-section</replaceable>
make up a section class.</para>
<para>You can use the wildcard <literal>*</literal> (match any) for
-<tqreplaceable>host</tqreplaceable>, <tqreplaceable>number</tqreplaceable>,
-and <tqreplaceable>class</tqreplaceable>. You may omit trailing components;
+<replaceable>host</replaceable>, <replaceable>number</replaceable>,
+and <replaceable>class</replaceable>. You may omit trailing components;
they are assumed to be <literal>*</literal> then. The host part may be a
-domain specification like <tqreplaceable>.inf.tu-dresden.de</tqreplaceable>
+domain specification like <replaceable>.inf.tu-dresden.de</replaceable>
or the wildcard <literal>+</literal> (match non-empty).</para>
<para>From which section a setting is actually taken is determined by
@@ -289,7 +289,7 @@ Example: display name <quote>myhost.foo:0</quote>, class <quote>dpy</quote>
and [X-:0] (the first local display).</para>
<para>The format for all keys is
-<userinput><option><tqreplaceable>key</tqreplaceable></option>&nbsp;<literal>=</literal>&nbsp;<parameter>value</parameter></userinput>.
+<userinput><option><replaceable>key</replaceable></option>&nbsp;<literal>=</literal>&nbsp;<parameter>value</parameter></userinput>.
Keys are only valid in the section class they are defined for.
Some keys do not apply to particular displays, in which case they are ignored.
</para>
@@ -329,12 +329,12 @@ local machine or rather remotely.</para>
<para>The formal syntax of a specification is
<screen>
-<userinput><tqreplaceable>display&nbsp;name</tqreplaceable>&nbsp;[<literal>_</literal><tqreplaceable>display&nbsp;class</tqreplaceable>]</userinput>
+<userinput><replaceable>display&nbsp;name</replaceable>&nbsp;[<literal>_</literal><replaceable>display&nbsp;class</replaceable>]</userinput>
</screen>
for all &X-Server;s. <quote>Foreign</quote> displays differ in having
a host name in the display name, may it be <literal>localhost</literal>.</para>
-<para>The <tqreplaceable>display name</tqreplaceable> must be something that can
+<para>The <replaceable>display name</replaceable> must be something that can
be passed in the <option>-display</option> option to an X program. This string
is used to generate the display-specific section names, so be careful to match
the names.
@@ -344,7 +344,7 @@ reverse host name resolution. For configuration purposes, the
<emphasis>not</emphasis> stripped to make them distinguishable from local
&X-Server;s started by &kdm;.</para>
-<para>The <tqreplaceable>display class</tqreplaceable> portion is also used in the
+<para>The <replaceable>display class</replaceable> portion is also used in the
display-specific sections. This is useful if you have a large collection of
similar displays (such as a corral of X terminals) and would like to set
options for groups of them.
@@ -364,7 +364,7 @@ reserve displays available, the menu item will be disabled.</para>
<para>When &kdm; starts a session, it sets up authorization data for the
&X-Server;. For local servers, &kdm; passes
-<command><option>-auth</option>&nbsp;<filename><tqreplaceable>filename</tqreplaceable></filename></command>
+<command><option>-auth</option>&nbsp;<filename><replaceable>filename</replaceable></filename></command>
on the &X-Server;'s command line to point it at its authorization data.
For &XDMCP; displays, &kdm; passes the authorization data to the &X-Server;
via the <quote>Accept</quote> &XDMCP; message.</para>
@@ -377,7 +377,7 @@ via the <quote>Accept</quote> &XDMCP; message.</para>
<para>The file specified by the <option>AccessFile</option> option provides
information which &kdm; uses to control access from displays requesting service
via &XDMCP;.
-The file tqcontains four types of entries: entries which control the response
+The file contains four types of entries: entries which control the response
to <quote>Direct</quote> and <quote>Broadcast</quote> queries, entries which
control the response to <quote>Indirect</quote> queries, macro definitions for
<quote>Indirect</quote> entries, and entries which control on which network
@@ -409,7 +409,7 @@ it can be followed by the optional <literal>NOBROADCAST</literal> keyword.
This can be used to prevent a &kdm; server from appearing on menus based on
<quote>Broadcast</quote> queries.</para>
-<para>An <quote>Indirect</quote> entry also tqcontains a host name or pattern,
+<para>An <quote>Indirect</quote> entry also contains a host name or pattern,
but follows it with a list of host names or macros to which the queries
should be forwarded. <quote>Indirect</quote> entries can be excluding as well,
in which case a (valid) dummy host name must be supplied to make the entry
@@ -422,7 +422,7 @@ character and hop count. If no hop count is specified, the multicast hop count
defaults to 1, keeping the packet on the local network. For IPv4 multicasting,
the hop count is used as the TTL.
-->
-If the indirect host list tqcontains the keyword <literal>CHOOSER</literal>,
+If the indirect host list contains the keyword <literal>CHOOSER</literal>,
<quote>Indirect</quote> queries are not forwarded, but instead a host chooser
dialog is displayed by &kdm;. The chooser will send a <quote>Direct</quote>
query to each of the remaining host names in the list and offer a menu of
@@ -437,27 +437,27 @@ in turn and the first matching entry determines the response.
<quote>Direct</quote> and <quote>Broadcast</quote> entries are ignored when
scanning for an <quote>Indirect</quote> entry and vice-versa.</para>
-<para>A macro definition tqcontains a macro name and a list of host names and
+<para>A macro definition contains a macro name and a list of host names and
other macros that the macro expands to. To distinguish macros from hostnames,
macro names start with a <literal>%</literal> character.</para>
<para>The last entry type is the <literal>LISTEN</literal> directive.
The formal syntax is
<screen>
-<userinput>&nbsp;<literal>LISTEN</literal>&nbsp;[<tqreplaceable>interface</tqreplaceable>&nbsp;[<tqreplaceable>multicast&nbsp;list</tqreplaceable>]]</userinput>
+<userinput>&nbsp;<literal>LISTEN</literal>&nbsp;[<replaceable>interface</replaceable>&nbsp;[<replaceable>multicast&nbsp;list</replaceable>]]</userinput>
</screen>
If one or more <literal>LISTEN</literal> lines are specified, &kdm; listens
for &XDMCP; requests only on the specified interfaces.
-<tqreplaceable>interface</tqreplaceable> may be a hostname or IP address
+<replaceable>interface</replaceable> may be a hostname or IP address
representing a network interface on this machine, or the wildcard
<literal>*</literal> to represent all available network interfaces.
If multicast group addresses are listed on a <literal>LISTEN</literal> line,
&kdm; joins the multicast groups on the given interface. For IPv6 multicasts,
-the IANA has assigned ff0<tqreplaceable>X</tqreplaceable>:0:0:0:0:0:0:12b as the
+the IANA has assigned ff0<replaceable>X</replaceable>:0:0:0:0:0:0:12b as the
permanently assigned range of multicast addresses for &XDMCP;. The
-<tqreplaceable>X</tqreplaceable> in the prefix may be tqreplaced by any valid scope
+<replaceable>X</replaceable> in the prefix may be replaced by any valid scope
identifier, such as 1 for Node-Local, 2 for Link-Local, 5 for Site-Local, and
-so on (see IETF RFC 2373 or its tqreplacement for further details and scope
+so on (see IETF RFC 2373 or its replacement for further details and scope
definitions). &kdm; defaults to listening on the Link-Local scope address
ff02:0:0:0:0:0:0:12b to most closely match the IPv4 subnet broadcast behavior.
If no <literal>LISTEN</literal> lines are given, &kdm; listens on all
@@ -770,7 +770,7 @@ or unmounting directories from file servers.</para>
# The contents are automatically enclosed in <para></para>.
# If "-" is given to Description, no comment is generated at all.
# If "!" is given, enums are not treated specially; otherwise, the macro
-# %ENUM% is tqreplaced with a list of the defined element/description pairs,
+# %ENUM% is replaced with a list of the defined element/description pairs,
# or - if the macro is not present - the list is appended to the
# description.
# Finally, a sentence with the Default (or CDefault, if given) is appended,
@@ -782,7 +782,7 @@ or unmounting directories from file servers.</para>
Section: General
Description:
- This section tqcontains global options that do not fit into any specific section.
+ This section contains global options that do not fit into any specific section.
Key: ConfigVersion
Type: string
@@ -1064,7 +1064,7 @@ Description:
Section: Xdmcp
If: defined(XDMCP)
Description:
- This section tqcontains options that control &kdm;'s handling of
+ This section contains options that control &kdm;'s handling of
&XDMCP; requests.
# See <xref linkend="xdmcp-with-kdm"/> to find out what &XDMCP; is.
@@ -1118,7 +1118,7 @@ Comment:
&XDMCP; access control file in the usual XDM-Xaccess format.
Description:
To prevent unauthorized &XDMCP; service and to allow forwarding of &XDMCP;
- IndirectQuery requests, this file tqcontains a database of hostnames which
+ IndirectQuery requests, this file contains a database of hostnames which
are either allowed direct access to this machine, or have a list of hosts
to which queries should be forwarded to. The format of this file is
described in <xref linkend="kdmrc-xaccess"/>.
@@ -1193,7 +1193,7 @@ Description:
Section: Shutdown
Description:
- This section tqcontains global options concerning system shutdown.
+ This section contains global options concerning system shutdown.
Key: HaltCmd
Type: string
@@ -1264,7 +1264,7 @@ Description:
Section: -Core
Description:
- This section class tqcontains options concerning the configuration
+ This section class contains options concerning the configuration
of the &kdm; backend (core).
Key: OpenDelay
@@ -1946,7 +1946,7 @@ Instance: */".xsession-errors-%s"
Instance: :0/".xsession-errors"
Comment:
The file (relative to $HOME) to redirect the session output to. This is
- a printf format string; one %s will be tqreplaced with the display name.
+ a printf format string; one %s will be replaced with the display name.
Description:
The file (relative to the user's home directory) to redirect the session
output to. One occurrence of <parameter>%s</parameter> in this string will be
@@ -1970,7 +1970,7 @@ Description:
Section: -Greeter
Description:
- This section class tqcontains options concerning the configuration
+ This section class contains options concerning the configuration
of the &kdm; frontend (greeter).
Key: GUIStyle
@@ -2066,7 +2066,7 @@ Default: "Welcome to Trinity at %n"
User: greeter
Instance: #*/"Welcome to Trinity at %n"
Comment:
- The headline in the greeter. The following character pairs are tqreplaced:
+ The headline in the greeter. The following character pairs are replaced:
- %d -> current display
- %h -> host name, possibly with domain name
- %n -> node name, most probably the host name without domain name
@@ -2077,7 +2077,7 @@ Comment:
Description:
The headline in the greeter. An empty greeting means none at all.
</para><para>
- The following character pairs are tqreplaced by their value:
+ The following character pairs are replaced by their value:
<variablelist>
<varlistentry>
<term><parameter>%d</parameter></term>
@@ -2157,7 +2157,7 @@ Type: enum
On: turn on
Keep: do not change the state
Default: Keep
-User: greeter(numLocktqStatus)
+User: greeter(numLockStatus)
Instance: #*/Off
Comment: &
Description:
@@ -2206,7 +2206,7 @@ Description: !
This option controls which users will be shown in the user view
(<option>UserList</option>) and/or offered for autocompletion
(<option>UserCompletion</option>).
- If it is <literal>Selected</literal>, <option>SelectedUsers</option> tqcontains
+ If it is <literal>Selected</literal>, <option>SelectedUsers</option> contains
the final list of users.
If it is <literal>NotHidden</literal>, the initial user list are all users
found on the system. Users contained in <option>HiddenUsers</option> are
@@ -2399,7 +2399,7 @@ Comment:
The configuration file to be used by krootimage.
Description:
The configuration file to be used by <command>krootimage</command>.
- It tqcontains a section named <literal>[Desktop0]</literal> like
+ It contains a section named <literal>[Desktop0]</literal> like
<filename>kdesktoprc</filename> does. Its options are not described
herein; guess their meanings or use the control center.
@@ -2552,7 +2552,7 @@ Description:
Specify conversation plugins for the login dialog; the first in the list
is selected initially.
Each plugin can be specified as a base name (which expands to
- <filename>$<envar>kde_modulesdir</envar>/kgreet_<tqreplaceable>base</tqreplaceable></filename>)
+ <filename>$<envar>kde_modulesdir</envar>/kgreet_<replaceable>base</replaceable></filename>)
or as a full pathname.
</para><para>
Conversation plugins are modules for the greeter which obtain authentication
@@ -2578,7 +2578,7 @@ Comment:
these settings; it is up to them what possible keys are.
Description:
A list of options of the form
- <tqreplaceable>Key</tqreplaceable><literal>=</literal><tqreplaceable>Value</tqreplaceable>.
+ <replaceable>Key</replaceable><literal>=</literal><replaceable>Value</replaceable>.
The conversation plugins can query these settings; it is up to them what
possible keys are.