diff options
Diffstat (limited to 'konsole/doc/More/iowa_vt100_news.txt')
| -rw-r--r-- | konsole/doc/More/iowa_vt100_news.txt | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/konsole/doc/More/iowa_vt100_news.txt b/konsole/doc/More/iowa_vt100_news.txt new file mode 100644 index 000000000..94a62b69a --- /dev/null +++ b/konsole/doc/More/iowa_vt100_news.txt @@ -0,0 +1,255 @@ +iowa_vt100.news + +\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ + +Newsgroups: comp.terminals +Path: utkcs2!emory!swrinde!cs.utexas.edu!wupost!gumby!destroyer + !news.iastate.edu!emann +From: emann@iastate.edu (The Emann) +Subject: A vt100 ctrl seq list +Message-ID: <1992Mar13.072004.12444@news.iastate.edu> +Date: 13 Mar 92 07:20:04 GMT +Sender: news@news.iastate.edu (USENET News System) +Lines: 205 + + + Without benefit of a vt100 programmer's reference, we've been trying +to locate as complete a list of control sequences for vt52/100/102's. +This list here was compiled from the lists we could find. Most notably +Rob Elliott's 'Selected ANSI Escape codes'; the Villanova list; and the +ANSI_X3.64-tables-from-BYTE list. We'd much rather have a reference manual, +but if anyone can tell us what's missing or incorrect in this list, it +would be greatly appreciated. + +start of list +---------------------------------------------- +Control Characters +------------------ + +Char +Name Dec Hex Action Taken +------------------------------------------------------------------ +NUL 0 0x00 ignored; Null +SOH 1 0x01 ignored; Start of heading +STX 2 0x02 ignored; Start of text +ETX 3 0x03 ignored; End of text +EOT 4 0x04 ignored; End of transmission +ENQ 5 0x05 Transmit answerback message +ACK 6 0x06 ignored; Acknowledge +BEL 7 0x07 Ring the bell +BS 8 0x08 Move cursor left +HT 9 0x09 Move cursor to next tab stop; Horizontal tab +LF 10 0x0A Line feed; causes print if in autoprint +VT 11 0x0B Same as LF; Vertical tab +FF 12 0x0C Same as LF; Form feed +CR 13 0x0D Move cursor to left margin or newline; Carriage return +SO 14 0x0E Invoke G1 character set +SI 15 0x0F Invoke G0 character set +DC1 16 0x10 ignored; Device control 1 +XON 17 0x11 Resume transmission; Device control 2 +DC3 18 0x02 ignored; Device control 3 +XOFF 19 0x13 Halt transmission; Device control 4 +NAK 20 0x14 ignored; Negative acknowledge +SYN 21 0x15 ignored; Syncronous idle +ETB 22 0x16 ignored; End of transmission block +CAN 23 0x17 ignored; Cancel +EM 24 0x18 Cancel escape sequence and display checkerboard +SUB 26 0x1A Same as CAN +ESC 27 0x1B Introduce a control sequence +FS 28 0x1C ignored; File separator +GS 29 0x1D ignored; Group separator +RS 30 0x1E ignored; Record separator +US 31 0x1F ignored; Unit separator +DEL 127 0x7F ignored; Delete + +Control Sequences +----------------- + +Action VT52 mode ANSI (VT100) +---------------------------------------------------- +Cursor up Esc A Esc [ Pn A +Cursor down Esc B Esc [ Pn B +Cursor right Esc C Esc [ Pn C +Cursor left Esc D Esc [ Pn D +Cursor home Esc H +Cursor address Esc Y Pl Pc Esc [ Pn(row);Pn(col);H or + Esc [ Pn(row);Pn(col);f +Cursor position report Esc [ 6 n + returns: Esc [ Pn(row);Pn(col) R +Index Esc D +Newline Esc E +Reverse newline Esc I Esc M +Save cursor & attr Esc 7 +Restore cursor & attr Esc 8 +Insert line Esc [ Pn L +Delete line Esc [ Pn M +Delete character Esc [ Pn P +Define scrolling region Esc [ Pn(top);Pn(bot) r +Erase cursor to EOL Esc K Esc [ K +Erase BOL to cursor Esc [ 1 K +Erase entire line Esc [ 2 K +Erase cursor to EOS Esc J Esc [ J +Erase BOS to cursor Esc [ 1 J +Erase entire screen Esc [ 2 J +Print screen or region Esc ] Esc [ i (region in ANSI only) +Print cursor line Esc V Esc [ ? 1 i +Enter print controller Esc W Esc [ 5 i +Exit print controller Esc X Esc [ 4 i +Enter auto print Esc ^ Esc [ ? 5 i +Exit auto print Esc - Esc [ ? 4 i +Set tab at current col Esc H +Clr tab at current col Esc [ g +Clear all tabs Esc [ 3 g +Enter ANSI mode Esc < +Application keypad Esc = Esc = +Numeric kyepad Esc > Esc > +Fill screen with 'E's Esc # 8 +Reset Esc c +Identify Esc Z Esc Z + returns: Esc/Z returns: Esc [ ? 6 c +Device attr report Esc [ c + returns: Esc [ ? 6 c +Device status report Esc [ 5 n + returns: Esc [ O n +Request term params Esc [ 1 x + returns: Esc[3;<par>;<nbits>;<xspeed>;<rspeed>;1;0x + +Mode name Ps Set (Esc [ Ps h) Reset (Esc [ Ps l) VT100 +------------------------------------------------------------------------- +Keyboard action 2 Locked Unlocked reset +Insertion 4 Insert Overwrite reset +Duplex 12 Full Half (echo) available +Linefeed/Newline 20 Newline Linefeed available +Cursor key ?1 Application Cursor available +ANSI/VT52 ?2 ANSI VT52 available +Column width ?3 132 80 available +Scolling method ?4 Smooth Jump available +Screen ?5 Reverse Normal available +Origin ?6 Relative Absolute available +Wraparound ?7 Wrap Truncate available +Key auto repeat ?8 Repeating No repeat available +Print formfeed ?18 Yes No available +Print extent ?19 Full screen Scolling region available + +Character set VT52 VT100 (G0) VT100 (G1) +-------------------------------------------------------- +United Kingdom (UK) Esc ( A Esc ) A +United States (US) Esc G Esc ( B Esc ) B +Graphics Esc F Esc ( 0 Esc ) 0 +Default ROM Esc ( 1 Esc ) 1 +Alternate ROM Esc ( 2 Esc ) 2 +Switch to G0/G1 Esc O Esc N + +Character attributes Ps (Esc [ Ps;Ps;Ps;...Psm) +--------------------------------------------------- +Normal (attr off) 0 Note: Ps=3 4 or 6 are unknown and +Bold on 1 probably redundant. +Underscore on 2 +Blink on 5 +Inverse on 7 + +Line Sizes: +Change current line VT100 +--------------------------------------- +To double-height top half Esc # 3 +To double-height bottom half Esc # 4 +To normal size Esc # 5 +To double-width Esc # 6 + +Cursor control keys VT52 VT100 (appl mode) VT100 (cursor mode) +--------------------------------------------------------------------- +Up arrow Esc A Esc O A Esc [ A +Down arrow Esc B Esc O B Esc [ B +Right arrow Esc C Esc O C Esc [ C +Left arrow Esc D Esc O D Esc [ D + +Auxilliary keypad VT52 (num) VT52 (appl) VT100 (num) VT100 (appl) +------------------------------------------------------------------------ +0 0 Esc ? p 0 Esc O p +1 1 Esc ? q 1 Esc O q +2 2 Esc ? r 2 Esc O r +3 3 Esc ? s 3 Esc O s +4 4 Esc ? t 4 Esc O t +5 5 Esc ? u 5 Esc O u +6 6 Esc ? v 6 Esc O v +7 7 Esc ? w 7 Esc O w +8 8 Esc ? x 8 Esc O x +9 9 Esc ? y 9 Esc O y +- - Esc ? m - Esc O m +, , Esc ? l , Esc O l +. . Esc ? n . Esc O n +Enter ^M Esc ? M ^M Esc O M +PF1 Esc P Esc P Esc O P Esc O P +PF2 Esc Q Esc Q Esc O Q Esc O Q +PF3 Esc R Esc R Esc O R Esc O R +PF4 Esc S Esc S Esc O S Esc O S + +G0 graphics char set +-------------------- + +ASCII code Symbol displayed +------------------------------------ +\ Diamond +a Chekerboard +e Degree sign +g Plus/minus sign +j Lower-right box corner +k Upper-right box corner +l Upper-left box corner +m Lower-left box corner +n Intersecting lines +o Horizontal line - scan 1 (bottom) +p Horizontal line - scan 3 +q Horizontal line - scan 5 (matches with box corners) +r Horizontal line - scan 7 +s Horizontal line - scan 9 (top) +t Left T +u Right T +v Top T +w Bottom T +x Vertical bar +y Less-than-or-equal-to sign +z Greater-than-or-equal-to sign +| Not-equal-to sign +( Pi sign +) UK pound sign +~ Centered dot + +--------------------------------------- +end of list + +\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ + +Path: utkcs2!memstvx1!ukma!asuvax!cs.utexas.edu!usc!elroy.jpl.nasa.gov!wvus + !abode!blars!blarson +Newsgroups: comp.terminals +Subject: Re: A vt100 ctrl seq list +Message-ID: <295@blars.UUCP> +From: blarson@blars.UUCP +Date: 13 Mar 92 10:13:23 GMT +Reply-To: blarson@usc.edu +References: <1992Mar13.072004.12444@news.iastate.edu> +Lines: 20 + +In article <1992Mar13.072004.12444@news.iastate.edu>, + emann@iastate.edu (The Emann) writes: +> +> Without benefit of a vt100 programmer's reference, we've been trying +> to locate as complete a list of control sequences for vt52/100/102's. + +Even if you had one, it wouldn't list them all. A couple of examples: +(Genuine vt100, imitators probably get them wrong. (Dec never was good +at imitating their own terminals.)) + +Esc [ 2 ; 8 y Wait for poweroff. +Esc [ 2 ; 15 y Flashing background mode. Also puts terminal in local. + +Also, many sequences produced different results at different speeds. +The original VT100 terminal has many undocumented modes such as 24 +duplicate lines, linefeed goes up, etc. + +-- +blarson@usc.edu usc!blarson blarson@zog +C news and rn for os9/68k! + +\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ |