diff options
Diffstat (limited to 'konsole/doc/More/swedish_vt102_codes.txt')
| -rw-r--r-- | konsole/doc/More/swedish_vt102_codes.txt | 413 |
1 files changed, 413 insertions, 0 deletions
diff --git a/konsole/doc/More/swedish_vt102_codes.txt b/konsole/doc/More/swedish_vt102_codes.txt new file mode 100644 index 000000000..7fca08c71 --- /dev/null +++ b/konsole/doc/More/swedish_vt102_codes.txt @@ -0,0 +1,413 @@ +Article 3073 of comp.terminals: +Path: cs.utk.edu!stc06.CTD.ORNL.GOV!fnnews.fnal.gov!uwm.edu!news.alpha.net!news.mathworks.com!europa.eng.gtefsd.com!howland.reston.ans.net!EU.net!uunet!sunic!trane.uninett.no!due.uninett.no!usenet +From: lars@mi.uib.no (Lars Johanson) +Newsgroups: comp.terminals +Subject: vt102 escape codes +Date: 24 Oct 1994 16:29:21 GMT +Organization: Haukeland Sykehus +Lines: 399 +Message-ID: <38gnd1$cio@due.uninett.no> +NNTP-Posting-Host: lpjo.onh.haukeland.no +X-Newsreader: WinVN 0.92.6+ + + +Hi. + +I have seen some people asking for escape sequencies for the +vt100-terminal. I asked the DIGITAL company in Sweden, and +received this (hopefully not copyrighted). It is a vt102 terminal, +but there seems to be little difference. I've tried to mark +functions special to vt102 with: // Not in vt100 + +Here you are: + + + +Escape codes for vt102 terminal. + +All numbers below are octal.<n> means numeric value,<c> means character string. +If <n> is missing it is 0 or in cursor movements 1. + +Reset and set modes + Set Modes + Esc [ <c> ; ... ; <c> h + 033 133 073 073 150 + Reset Modes + Esc [ <c> ; ... ; <c> l + 033 133 073 073 154 + + Where <c> is + '2'= Lock keyboard (set); Unlock keyboard (reset) + '4'= Insert mode (set); Replace mode (reset) + '12'= Echo on (set); Echo off (reset) + '20'= Return = CR+LF (set); Return = CR (reset) + '?1'= Cursorkeys application (set); Cursorkeys normal (reset) + '?2'= Ansi (set); VT52 (reset) + '?3'= 132 char/row (set); 80 char/row (reset) + '?4'= Jump scroll (set); Smooth scroll (reset) + '?5'= Reverse screen (set); Normal screen (reset) + '?6'= Sets relative coordinates (set); Sets absolute coordinates (reset) + '?7'= Auto wrap (set); Auto wrap off (reset) + '?8'= Auto repeat on (set); Auto repeat off (reset) + '?18'= Send FF to printer after print screen (set); No char after PS (reset) + '?19'= Print screen prints full screen (set); PS prints scroll region (reset) + '?25'= Cursor on (set); Cursor off (reset) + +Set scrolling region (n1=upper,n2=lower) + Esc [ <n1> ; <n2> r + 033 133 073 162 + + +Cursor movement (<n>=how many chars or lines), cursor stop at margin. + Up + Esc [ <n> A + 033 133 101 + Down + Esc [ <n> B + 033 133 102 + Right + Esc [ <n> C + 033 133 103 + Left + Esc [ n D + 033 133 104 + Cursor position (<n1>=y,<n2>=x, from top of screen or scroll region) + Esc [ <n1> ; <n2> H + 033 133 073 110 + Or Esc [ <n1> ; <n2> f + 033 133 073 146 + Index (cursor down with scroll up when at margin) + Esc D + 033 104 + Reverse index (cursor up with scroll down when at margin) + Esc M + 033 115 + Next line (CR+Index) + Esc E + 033 105 + Save cursor and attribute + Esc 7 + 033 067 + Restore cursor and attribute + Esc 8 + 033 070 + + +Keybad character selection + Application keypad mode + Esc = + 033 075 + Numeric keypad mode + Esc > + 033 076 + + Keypadkeys codes generated + Numeric Application VT52 Application + 0 0 (060) Esc O p (033 117 160) Esc ? p (033 077 160) + 1 1 (061) Esc O q (033 117 161) Esc ? q (033 077 161) + 2 2 (062) Esc O r (033 117 162) Esc ? r (033 077 162) + 3 3 (063) Esc O s (033 117 163) Esc ? s (033 077 163) + 4 4 (064) Esc O t (033 117 164) Esc ? t (033 077 164) + 5 5 (065) Esc O u (033 117 165) Esc ? u (033 077 165) + 6 6 (066) Esc O v (033 117 166) Esc ? v (033 077 166) + 7 7 (067) Esc O w (033 117 167) Esc ? w (033 077 167) + 8 8 (070) Esc O x (033 117 170) Esc ? x (033 077 170) + 9 9 (071) Esc O y (033 117 171) Esc ? y (033 077 171) + - (minus) - (055) Esc O m (033 117 155) Esc ? m (033 077 155) + , (comma) , (054) Esc O l (033 117 154) Esc ? l (033 077 154) + . (period) . (056) Esc O n (033 117 156) Esc ? n (033 077 156) + Enter CR (015)* Esc O M (033 117 115) Esc ? M (033 077 115) + PF1 Esc O P Esc O P (033 117 120) Esc P (033 120) + PF2 Esc O Q Esc O Q (033 117 121) Esc Q (033 121) + PF3 Esc O R Esc O R (033 117 122) Esc R (033 122) + PF4 Esc O S Esc O S (033 117 123) Esc S (033 123) + * Or CR+LF (015 012) + + Cursorkeys codes generated (changed by set and reset modes '?1') + normal application + Up Esc [ A Esc O A + 033 133 101 033 117 101 + Down Esc [ B Esc O B + 033 133 102 033 117 102 + Right Esc [ C Esc O C + 033 133 103 033 117 103 + Left Esc [ D Esc O D + 033 133 104 033 117 104 + + +Select character set + UK as G0 + Esc ( A + 033 050 101 + US as G0 + Esc ( B + 033 050 102 + Special characters and line drawing character set as G0 + Esc ( 0 + 033 050 060 + Alternate ROM as G0 // Not in vt100 + Esc ( 1 + 033 050 061 + Alternate ROM special characters character set as G0 // Not in vt100 + Esc ( 2 + 033 050 062 + + UK as G1 + Esc ) A + 033 051 101 + US as G1 + Esc ) B + 033 051 102 + Special characters and line drawing character set as G1 + Esc ) 0 + 033 051 060 + Alternate ROM as G1 // Not in vt100 + Esc ) 1 + 033 051 061 + Alternate ROM special characters character set as G1 // Not in vt100 + Esc ) 2 + 033 051 062 + + Selects G2 for one character // Not in vt100 + Esc N + 033 115 + Selects G3 for one character // Not in vt100 + Esc O + 033 117 + + +Set graphic rendition + Esc [ <n> ; <n> m + 033 133 073 156 + + Where <n> is + 0 = Turn off attributes + 1 = Bold (Full) + 2 = Half // Not in vt100 + 4 = Underline + 5 = Blink + 7 = Reverse + 21 = Normal intensity + 22 = Normal intensity + 24 = Cancel underlined + 25 = Cancel blinking + 27 = Cancel reverse + +Tab stops + Set horizontal tab + Esc H + 033 110 + Clear horizontal tab + Esc [ g + 033 133 147 + Or Esc [ 0 g + 033 133 060 147 + Clear all horizontal tabs + Esc [ 3 g + 033 133 063 147 + + +Line attributes + Double-height + Top half + Esc # 3 + 033 043 063 + Bottom half + Esc # 4 + 033 043 064 + Single-width, single-height + Esc # 5 + 033 043 065 + Double-width + Esc # 6 + 033 043 066 + + +Erasing + Erase in line + End of line (including cursor position) + Esc [ K + 033 133 113 + Or Esc [ 0 K + 033 133 060 113 + Beginning of line (including cursor position) + Esc [ 1 K + 033 133 061 113 + Complete line + Esc [ 2 K + 033 133 062 113 + Erase in display + End of screen (including cursor position) + Esc [ J + 033 133 112 + Or Esc [ 0 J + 033 133 060 112 + Beginning of screen (including cursor position) + Esc [ 1 J + 033 133 061 112 + Complete display + Esc [ 2 J + 033 133 062 112 + + +Computer editing + Delete characters (<n> characters right from cursor + Esc [ <n> P + 033 133 120 + Insert line (<n> lines) + Esc [ <n> L + 033 133 114 + Delete line (<n> lines) + Esc [ <n> M + 033 133 115 + + +Printing + Esc [ <c> i + 033 133 151 + + Where <c> is + ''= Same as '0' + '0'= Prints screen (full or scroll region) + '4'= Printer controller off + '5'= Printer controller on (Print all received chars to printer) + '?1'= Print cursor line + '?4'= Auto print off + '?5'= Auto print on (Prints line to printer when you exit from it) + + +Reports + Device status + Esc [ <c> n + 033 133 156 + + Where <c> is + '0'=Response Ready, no malfunctions detected + '3'=Malfunction, error in self-test. + '5'=Status report request + '6'=Request cursor position. + '?10'=Response to printer status request, All ok. + '?11'=Response to printer status request, Printer is not ready. + '?13'=Response to printer status request, No printer. + '?15'=Status report request from printer + + Cursor position raport (Response to request cursor position) + Esc [ <n1> ; <n2> R + 033 133 073 122 + Request terminal to identify itself (esc Z may not be supported in future) + Esc [ c + 033 133 143 + Esc [ 0 c + 033 133 060 143 + Esc Z + 033 132 + Response to terminal identify (VT102) + Esc [ ? 6 c + 033 133 077 066 143 + + +Reset to initial state + Esc c + 033 143 + + +Tests + Invoke confidence test + Esc [ 2 ; <n> y + 033 133 062 073 171 + + Where <n> is + '1'= Power-up test + '2'= Data loopback test + '4'= EIA loopback test + '9'= Power-up tests (continuously) + '10'= Data loopback tests (continuously) + '12'= EIA loopback tests (continuously) + '16'= Printer loopback test + '24'= Printer loopback tests (continuously) + + +Screen adjustments + Esc # 8 + 033 043 070 + + +Keyboard indicator + Led L1 off + Esc [ 0 q + 033 133 060 181 + Led L1 on + Esc [ 1 q + 033 133 061 181 + + + +VT52 sequences + Ansi mode + Esc < + 033 074 + Cursor positioning + Up Esc A + 033 101 + Down Esc B + 033 102 + Right Esc C + 033 103 + Left Esc D + 033 104 + Home Esc H + 033 110 + Direct cursor address + Esc Y <line+040> <columns+040> + 033 131 + Reverse linefeed Esc I + 033 111 + Erase to end of line Esc K + 033 113 + Erase to end of screen Esc J + 033 112 + Auto print on Esc ^ + 033 136 + Auto print off Esc + 033 137 + Printer controller on Esc W + 033 127 + Printer controller off Esc X + 033 130 + Print cursor line Esc V + 033 135 + Print screen Esc ] + 033 135 + Indentify request Esc Z + 033 132 + Response to indetify Esc / Z + request (VT52) 033 057 132 + Special charset (same Esc F + as line draw in VT102 033 106 + Normal char set Esc G + 033 107 + + +Control characters + 000 = Null (fill character) + 003 = ETX (Can be selected half-duplex turnaround char) + 004 = EOT (Can be turnaround or disconnect char, if turn, then DLE-EOT=disc.) + 005 = ENQ (Transmits answerback message) + 007 = BEL (Generates bell tone) + 010 = BS (Moves cursor left) + 011 = HT (Moves cursor to next tab) + 012 = LF (Linefeed or New line operation) + 013 = VT (Processed as LF) + 014 = FF (Processed as LF, can be selected turnaround char) + 015 = CR (Moves cursor to left margin, can be turnaround char) + 016 = SO (Selects G1 charset) + 017 = SI (Selects G0 charset) + 021 = DC1 (XON, causes terminal to continue transmit) + 023 = DC3 (XOFF, causes terminal to stop transmitting) + 030 = CAN (Cancels escape sequence) + 032 = SUB (Processed as CAN) + 033 = ESC (Processed as sequence indicator) + + + + |