From 1b6c123de102f0152d296fba8771d348329ba95c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Sl=C3=A1vek=20Banko?= Date: Tue, 17 Nov 2020 19:52:37 +0100 Subject: Move the khelpcenter guides to the directory level in which they are installed. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Slávek Banko --- doc/khelpcenter/faq/tdeapps.docbook | 158 ++++++++++++++++++++++++++++++++++++ 1 file changed, 158 insertions(+) create mode 100644 doc/khelpcenter/faq/tdeapps.docbook (limited to 'doc/khelpcenter/faq/tdeapps.docbook') diff --git a/doc/khelpcenter/faq/tdeapps.docbook b/doc/khelpcenter/faq/tdeapps.docbook new file mode 100644 index 000000000..441759054 --- /dev/null +++ b/doc/khelpcenter/faq/tdeapps.docbook @@ -0,0 +1,158 @@ + + + +&tde; applications + + + + +&kppp; + + + +Many &tde; users report problems using &kppp;. Make sure you have already checked the +following: + + +Can you dialup to your ISP without using &kppp;? If you cannot, then perhaps &kppp; is not the culprit after +all. +Have you gone through the &kppp; documentation +and followed the instructions and troubleshooting +suggestions? + +The &kppp; handbook is available through the +&tde; Help Center. +If you still encounter problems, then the following might help: + +How do I change the &MTU; setting in &kppp;? +Open up the &kppp; dialog box and select +Setup. Choose an existing account and click +Edit, or New to create a +new dialup account. Select the Dial tab and +click Arguments. Type what you want to change +in the Argument textbox (⪚ mtu 296) and +click Add. When you are satisfied, click +Close. +To check whether the options took, do one of the following: + + +In a terminal window, run +/sbin/ifconfig ppp0 and look +at the reported &MTU; in the output. It should match your +request. + +Add and +(each on a separate line) to your +/etc/ppp/options file and restart your +&PPP; session. You will find debugging messages in +/var/log/messages, including &MRU; and &MTU; +settings. + +If you want, the &MRU; and &MTU; settings can be added to the +options file, one complete setting per line, no +quotes or dashes. + + +&kppp; connects at a slower speed than +normal. +The following might do the trick: + +Try executing setserial +spd_hi. +The default &MTU; value is 1500, +which maybe too large +for a dialup connection. Try changing it to a smaller value like +296 +or 576. +Check in your $HOME/.trinity/share/config for the +kppprc. Ensure the correct modem speed is +actually defined there. + + + + + + + + +&konsole; + + + + + +How do I page-up or page-down? +Use +ShiftPage Up +and ShiftPg +Dn. + + + + +How do I copy text from &konsole; to +anything else? +Use the mouse to select the desired text. From the +Edit menu, select Copy, or press +&Ctrl;&Shift;C. This places +the text in the &tde; clipboard, &klipper;. Next select +the target application, place the mouse pointer to the +desired location and press &Ctrl;V. +Alternately, highlight the text by dragging with the &LMB; down and +paste by clicking with the &MMB; (or both buttons if you are using a +2 button mouse with 3 button emulation). +Note that the copying and pasting keyboard shortcuts use the +&Shift; key. That is because in traditional Unix terminals, +&Ctrl;C is used to break or stop +a process from running. + + + +Why can't &konsole; find the 9x15 and the 2 +console bitmap fonts installed with &tde;? + + +FontConfig must find the three fonts +installed in: $TDEDIR/share/fonts. + If +the &tde; install does not install these fonts in a directory that +already exists (⪚ /usr/share/fonts) then you must add this +directory to the configuration file /etc/fonts/local.conf. This should be +the first line after <fontconfig>. For example: + +<fontconfig> +<dir>/usr/trinity/share/fonts</dir> +</fontconfig> + +After adding the directory, run (as root): +fc-cache -v and check that +it found the directory. + + + + + + + + + + + -- cgit v1.2.3