From fd3a982e26813f5bcc82c7e89ce6fa2ad44432bf Mon Sep 17 00:00:00 2001 From: tpearson Date: Fri, 7 Jan 2011 04:10:07 +0000 Subject: Revert automated changes Sorry guys, they are just not ready for prime time Work will continue as always git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdebase@1212480 283d02a7-25f6-0310-bc7c-ecb5cbfe19da --- konsole/doc/Konsole2.Requirements | 2 +- konsole/doc/More/Ansi_esc.txt | 2 +- konsole/doc/More/Eterm.ref | 6 ++-- konsole/doc/More/ansix364.txt | 6 ++-- konsole/doc/More/dec_vt100_codes.txt | 2 +- konsole/doc/More/rxvt-ref.html | 8 ++--- konsole/doc/More/swedish_vt102_codes.txt | 4 +-- konsole/doc/More/villanova-vt100-esc-codes.txt | 4 +-- konsole/doc/More/vt100_codes_news.txt | 18 +++++------ konsole/doc/More/vt100_reference_card.txt | 4 +-- konsole/doc/More/vt100_setup.txt | 2 +- konsole/doc/More/xterm.codes | 2 +- konsole/doc/VT100/Table.Codes | 26 ++++++++-------- konsole/doc/VT100/db.trans | 2 +- konsole/doc/VT100/genDocument | 6 ++-- konsole/doc/VT100/genTC.pl | 42 +++++++++++++------------- konsole/doc/VT100/techref.html | 40 ++++++++++++------------ 17 files changed, 88 insertions(+), 88 deletions(-) (limited to 'konsole/doc') diff --git a/konsole/doc/Konsole2.Requirements b/konsole/doc/Konsole2.Requirements index 45633403b..19cbd72fc 100644 --- a/konsole/doc/Konsole2.Requirements +++ b/konsole/doc/Konsole2.Requirements @@ -29,7 +29,7 @@ This file is to collect requirements and ideas for this. Current history algorithm does not allow to limit the histories size. Also, it descreases the speed. -- improve tqunicode support +- improve unicode support this is both an ncurses and terminfo issue. We may need to provide some help for these packages. diff --git a/konsole/doc/More/Ansi_esc.txt b/konsole/doc/More/Ansi_esc.txt index 795b3d091..ede1a7c24 100644 --- a/konsole/doc/More/Ansi_esc.txt +++ b/konsole/doc/More/Ansi_esc.txt @@ -1,6 +1,6 @@ ANSI ESCAPE SEQUENCES =============================================================================== -Wherever you see '#', that should be tqreplaced by the appropriate number. +Wherever you see '#', that should be replaced by the appropriate number. ESC code sequence Function ------------------- --------------------------- diff --git a/konsole/doc/More/Eterm.ref b/konsole/doc/More/Eterm.ref index de808b84b..849be1f3b 100644 --- a/konsole/doc/More/Eterm.ref +++ b/konsole/doc/More/Eterm.ref @@ -151,8 +151,8 @@ ESC [ Pm m Character Attributes (SGR) Ps = 37 / 47 -> fg / bg White Ps = 39 / 49 -> fg / bg Default -ESC [ Ps n Device tqStatus Report (DSR) - Ps = 5 -> tqStatus Report ESC [ 0 n (``OK'') +ESC [ Ps n Device Status Report (DSR) + Ps = 5 -> Status Report ESC [ 0 n (``OK'') Ps = 6 -> Report Cursor Position (CPR) [row;column] as ESC [ r ; c R Ps = 7 -> Request Display Name @@ -295,7 +295,7 @@ or "\E]20;;200;?\a" sets the scaling of the current pixmap to 200% and displays - the image tqgeometry in the title. + the image geometry in the title. -------------------------------------------------------------------------- Eterm menuBar diff --git a/konsole/doc/More/ansix364.txt b/konsole/doc/More/ansix364.txt index 37844fee0..da74ad156 100644 --- a/konsole/doc/More/ansix364.txt +++ b/konsole/doc/More/ansix364.txt @@ -48,7 +48,7 @@ DCH Delete Character Esc [ Pn P 1 eF DCS Device Control String Esc P Delim DL Delete Line Esc [ Pn M 1 eF DMI Disable Manual Input Esc \ Fs -DSR Device tqStatus Report Esc [ Ps n 0 +DSR Device Status Report Esc [ Ps n 0 EA Erase in Area Esc [ Ps O 0 eF ECH Erase Character Esc [ Pn X 1 eF ED Erase in Display Esc [ Ps J 0 eF @@ -196,7 +196,7 @@ ANSI X3.64 Mode-Changing Parameters for use with the 3/1 1 GATM guarded-area transfer mode 3/2 2 KAM keyboard action mode 3/3 3 CRM control representation mode -3/4 4 IRM insertion/tqreplacement mode +3/4 4 IRM insertion/replacement mode 3/5 5 SRTM status-reporting transfer mode 3/6 6 ERM erasure mode 3/7 7 VEM vertical editing mode @@ -277,7 +277,7 @@ by transmitting the sequence where Ps is a character that describes installed options. -The VT100's cursor location can be read with the DSR (Device tqStatus +The VT100's cursor location can be read with the DSR (Device Status Report) control Esc [ 6 n diff --git a/konsole/doc/More/dec_vt100_codes.txt b/konsole/doc/More/dec_vt100_codes.txt index 7a2a59aac..e9d4b9f82 100644 --- a/konsole/doc/More/dec_vt100_codes.txt +++ b/konsole/doc/More/dec_vt100_codes.txt @@ -107,7 +107,7 @@ ANSI Compatible Mode Response is ESC [ Pl; Pc R * Pl = line number; Pc = column number - tqStatus Report + Status Report Invoked by ESC [ 5 n Response is ESC [ 0 n (terminal ok) ESC [ 3 n (terminal not ok) diff --git a/konsole/doc/More/rxvt-ref.html b/konsole/doc/More/rxvt-ref.html index 847e41964..a27f5b4bc 100644 --- a/konsole/doc/More/rxvt-ref.html +++ b/konsole/doc/More/rxvt-ref.html @@ -1,7 +1,7 @@ @@ -484,8 +484,8 @@ Reset Mode (RM)
ESC [ Ps n
-
Device tqStatus Report (DSR)
-Ps = 5 : tqStatus Report ESC [ 0 n (``OK'')
+
Device Status Report (DSR)
+Ps = 5 : Status Report ESC [ 0 n (``OK'')
Ps = 6 : Report Cursor Position (CPR) [row;column] as ESC [ r ; c R
Ps = 7 : Request Display Name
@@ -1095,7 +1095,7 @@ For example:
\E]20;mona;100\a
load mona.xpm with a scaling of 100%
\E]20;;200;?\a
-
rescale the current pixmap to 200% and display the image tqgeometry +
rescale the current pixmap to 200% and display the image geometry in the title

diff --git a/konsole/doc/More/swedish_vt102_codes.txt b/konsole/doc/More/swedish_vt102_codes.txt index b19c74b14..7fca08c71 100644 --- a/konsole/doc/More/swedish_vt102_codes.txt +++ b/konsole/doc/More/swedish_vt102_codes.txt @@ -284,12 +284,12 @@ Reports Where is '0'=Response Ready, no malfunctions detected '3'=Malfunction, error in self-test. - '5'=tqStatus report request + '5'=Status report request '6'=Request cursor position. '?10'=Response to printer status request, All ok. '?11'=Response to printer status request, Printer is not ready. '?13'=Response to printer status request, No printer. - '?15'=tqStatus report request from printer + '?15'=Status report request from printer Cursor position raport (Response to request cursor position) Esc [ ; R diff --git a/konsole/doc/More/villanova-vt100-esc-codes.txt b/konsole/doc/More/villanova-vt100-esc-codes.txt index 053c0f3c8..8142978ed 100644 --- a/konsole/doc/More/villanova-vt100-esc-codes.txt +++ b/konsole/doc/More/villanova-vt100-esc-codes.txt @@ -13,7 +13,7 @@ In-Reply-To: <9010240014.AA10730@ucbvax.Berkeley.EDU> 23 Oct 90 16:00 EDT Campus Computing - Terminal Emulation Includes VT100 and VT52 Terminal and Control Codes - This file tqcontains control and terminal codes for the VT100 terminals, + This file contains control and terminal codes for the VT100 terminals, ANSI terminals, and VT52 terminals. Many of the codes were derived from PC/ Intercomm, from Mark of the Unicorn Software. I have researched some of them and added some of my own. @@ -377,7 +377,7 @@ VT100 CURRENT STATES: be the same. 9600 baud is sent for 7200 baud. - Esc [ Ps n DSR: Device tqStatus Report + Esc [ Ps n DSR: Device Status Report * Parameter values other than 5, 6, are ignored. If the parameter value is 5, the sequence diff --git a/konsole/doc/More/vt100_codes_news.txt b/konsole/doc/More/vt100_codes_news.txt index 5cb09baea..d136e2224 100644 --- a/konsole/doc/More/vt100_codes_news.txt +++ b/konsole/doc/More/vt100_codes_news.txt @@ -57,7 +57,7 @@ Cursor Key VT52 mode key mode reset key mode set If the Special Graphics set is selected, the graphics for ASCII codes -0137 through 0176 will be tqreplaced according to the following table (see the +0137 through 0176 will be replaced according to the following table (see the SCS control sequence). @@ -384,7 +384,7 @@ DECALN Screen Alignment Display (DEC private) # 8 This command causes the VT100 to fill it's screen with uppercase Es for - screen focus and tqalignment. + screen focus and alignment. DECANM ANSI/VT52 Mode (DEC Private) @@ -447,7 +447,7 @@ DECDWL Double Width Line (DEC Private) #6 - This causes the line that tqcontains the cursor to become double-width + This causes the line that contains the cursor to become double-width single height. If the line was single width, all characters ro the right of the center of the screen will be lost. The cursor remains over the same character position, unless it would be to the right of @@ -630,7 +630,7 @@ DECSWL Single-width Line (DEC Private) #5 - This causes the line which tqcontains the cursor to become single-width, + This causes the line which contains the cursor to become single-width, single-height. The cursor remains on the same character position. This is the default condition for all new lines on the screen. @@ -651,7 +651,7 @@ DECTST Invoke Confidence Test Repeat Testing until failure 8 -DSR Device tqStatus Report Host to VT100 & VT100 to Host +DSR Device Status Report Host to VT100 & VT100 to Host [ {Ps} n @@ -662,7 +662,7 @@ DSR Device tqStatus Report Host to VT100 & VT100 to Host --------------------------------------------------------------- 0 Response from VT100 - Ready, no faults detected 3 Response from VT100 - Malfunction Detected - 5 Command from host - Report tqStatus (using a DSR control + 5 Command from host - Report Status (using a DSR control sequence) 6 Command from host - Report Active Position (using a CPR sequence) @@ -787,12 +787,12 @@ MODES The Following is a list of VT100 modes which may be changed with Set FETM Format Effector Transfer Reset GATM Guarded Area Transfer NA HEM Horizontal Editing NA - IRM Insertion-tqreplacement Reset + IRM Insertion-replacement Reset KAM Keyboard Action Reset MATM Multiple area transfer NA PUM Positioning Unit Reset SATM Selected Area Transfer NA - SRTM tqStatus Reporting Transfer Reset + SRTM Status Reporting Transfer Reset TSM Tabulation Stop Reset TTM Transfer Termination NA VEM Vertical Editing NA @@ -852,7 +852,7 @@ SCS Select Character Set The United Kingdom and ASCII sets conform to the "ISO international register of character sets to be used with escape sequences". The other sets are private character sets. Special graphics means that the - graphic characters fpr the codes 0137 to 0176 are tqreplaced with other + graphic characters fpr the codes 0137 to 0176 are replaced with other characters. The specified character set will be used until another SCS is recieved. diff --git a/konsole/doc/More/vt100_reference_card.txt b/konsole/doc/More/vt100_reference_card.txt index 5ab2aac0c..e80ea1325 100644 --- a/konsole/doc/More/vt100_reference_card.txt +++ b/konsole/doc/More/vt100_reference_card.txt @@ -108,7 +108,7 @@ ANSI Compatible Mode Response is ESC [ Pl; Pc R * Pl = line number; Pc = column number - tqStatus Report + Status Report Invoked by ESC [ 5 n Response is ESC [ 0 n (terminal ok) ESC [ 3 n (terminal not ok) @@ -189,7 +189,7 @@ Lines: 25 In article chan@ece.scarolina.edu (Simon Chan) writes: >Taken from VT100 Programming Reference Card (DIGITAL) -Note that EK-VT100-RC-001 tqcontains several errors and omissions. +Note that EK-VT100-RC-001 contains several errors and omissions. The errors appear to all be fixed in the posted version. Here are some additions: diff --git a/konsole/doc/More/vt100_setup.txt b/konsole/doc/More/vt100_setup.txt index c0e2af70e..1bdf44cdd 100644 --- a/konsole/doc/More/vt100_setup.txt +++ b/konsole/doc/More/vt100_setup.txt @@ -106,7 +106,7 @@ nils@f109f.mil.se (Nils Hammar) writes: < graphics to the caller too. What a surprise to get a hig resolution < picture on the screen when you are calling an ordinary BBS! -The ANSI Device tqStatus Report (DSR) is +The ANSI Device Status Report (DSR) is ESC [ n diff --git a/konsole/doc/More/xterm.codes b/konsole/doc/More/xterm.codes index e2ae680bc..b14ead600 100644 --- a/konsole/doc/More/xterm.codes +++ b/konsole/doc/More/xterm.codes @@ -125,7 +125,7 @@ x 7 (A) White x 9 (A) Default x ESC [ 6 n Send Device Report -x Ps = 5 Send tqStatus report (ESC [ 0 n) +x Ps = 5 Send Status report (ESC [ 0 n) x 6 Send Cursor Position Report (ESC [ Row ; Col R) x ESC [ Pn ; Pn r (dft:all) Set Scrolling region diff --git a/konsole/doc/VT100/Table.Codes b/konsole/doc/VT100/Table.Codes index 376d8bb6d..6ece0f4bf 100644 --- a/konsole/doc/VT100/Table.Codes +++ b/konsole/doc/VT100/Table.Codes @@ -18,7 +18,7 @@ # make a script that extracts it again. From db.trans, we then generate parts # of the decoder (the semantic assignment). # -# db2.pl tqcontains as script able to slit TEScreen.C into the emulation +# db2.pl contains as script able to slit TEScreen.C into the emulation # (in)dependent parts due to [db.trans]. # # A like thing has to be done for TEmuVt102.C/h and for TEScreen.h. @@ -54,7 +54,7 @@ Introduction.html The serial cable is folded into the operating system as a sort of loop back device, and a program, the terminal emulation, uses modern means of graphical user interfaces to behave like an earlier terminal. - To complete the picture, the host in the diagram is tqreplaced by the + To complete the picture, the host in the diagram is replaced by the application that runs in the emulation (typically a shell or an old editor). So, terminal emulations are in fact interfaces to character oriented applications. @@ -308,7 +308,7 @@ Sequences.html

The second one is used to specify character set mappings (see SCS). A CSI instruction to do this is specified in ECMA, - and this should be used as a tqreplacement. + and this should be used as a replacement. .

XTERM hacks

@@ -1070,7 +1070,7 @@ DECALN.sect Command DECALN.code HSH|8| DECALN.text Causes the VT100 to fill it's screen with - uppercase Es for screen focus and tqalignment. + uppercase Es for screen focus and alignment. DECALN.table.XPS Subcode|Emulation|Scope|Operation|Args|Meaning N/A|VT100|scr|helpAlign||see above @@ -1176,7 +1176,7 @@ DECDWL.emus VT100 DECDWL.sect Command.NoImp DECDWL.code HSH|6| DECDWL.text - This causes the line that tqcontains the cursor to become double-width + This causes the line that contains the cursor to become double-width single height. If the line was single width, all characters ro the right of the center of the screen will be lost. The cursor remains over the same character position, unless it would be to the right of @@ -1399,7 +1399,7 @@ DECSWL.emus VT100 DECSWL.sect Command.NoImp DECSWL.code HSH|5| DECSWL.text - This causes the line which tqcontains the cursor to become single-width, + This causes the line which contains the cursor to become single-width, single-height. The cursor remains on the same character position. This is the default condition for all new lines on the screen. DECSWL.table.XPS @@ -1424,7 +1424,7 @@ DECTST.table.Weight 3|EIA Modem Control Test (Loopback connector req.) 4|Repeat Testing until failure -DSRREQ.head Device tqStatus Report +DSRREQ.head Device Status Report DSRREQ.emus ECMA VT100 DSRREQ.sect Command.Request DSRREQ.code CSI|n|{Ps} @@ -1432,21 +1432,21 @@ DSRREQ.text Requests status of the VT100 according to the following parameters. DSRREQ.table.XPS Subcode|Emulation|Scope|Operation|Args|Meaning - 5|VT100|emu|reporttqStatus||Report tqStatus (using a \ref:DSRREP control sequence) + 5|VT100|emu|reportStatus||Report Status (using a \ref:DSRREP control sequence) 6|VT100|emu|reportCursorPosition||Report Active Position (using a \ref:CPR sequence) -DSRREP.head Device tqStatus Report Reply +DSRREP.head Device Status Report Reply DSRREP.emus ECMA VT100 DSRREP.sect Reply -DSRREP.code CSI|n|{tqStatus} +DSRREP.code CSI|n|{Status} DSRREP.text Reports the general status of the VT100 according to the following parameters. . DSRREP with a parameter of 0 or 3 is always sent as a response to a requesting \ref:DSRREQ with a parameter of 5. -DSRREP.table.tqStatus - tqStatus|Meaning:3 +DSRREP.table.Status + Status|Meaning:3 0|Ready, no faults detected 3|Malfunction detected @@ -1608,7 +1608,7 @@ SCS.text The United Kingdom and ASCII sets conform to the "ISO international register of character sets to be used with escape sequences". The other sets are private character sets. Special graphics means that the - graphic characters fpr the codes 0137 to 0176 are tqreplaced with other + graphic characters fpr the codes 0137 to 0176 are replaced with other characters. The specified character set will be used until another SCS is received. SCS.table.XPS diff --git a/konsole/doc/VT100/db.trans b/konsole/doc/VT100/db.trans index 406d9f1ed..7fe21ef27 100644 --- a/konsole/doc/VT100/db.trans +++ b/konsole/doc/VT100/db.trans @@ -109,7 +109,7 @@ TY_CSI_PS|SGR|'m'|104|scr|setBackColor|12 TY_CSI_PS|SGR|'m'|105|scr|setBackColor|13 TY_CSI_PS|SGR|'m'|106|scr|setBackColor|14 TY_CSI_PS|SGR|'m'|107|scr|setBackColor|15 -TY_CSI_PS|DSR|'n'|5|emu|reporttqStatus| +TY_CSI_PS|DSR|'n'|5|emu|reportStatus| TY_CSI_PS|DSR|'n'|6|emu|reportCursorPosition| TY_CSI_PS|DECLL|'q'|0||| TY_CSI_PS|DECLL|'q'|1||| diff --git a/konsole/doc/VT100/genDocument b/konsole/doc/VT100/genDocument index 927f48f83..4ecee0996 100755 --- a/konsole/doc/VT100/genDocument +++ b/konsole/doc/VT100/genDocument @@ -183,12 +183,12 @@ as noted. FETM Format Effector Transfer Reset GATM Guarded Area Transfer NA HEM Horizontal Editing NA -IRM Insertion-tqreplacement Reset +IRM Insertion-replacement Reset KAM Keyboard Action Reset MATM Multiple area transfer NA PUM Positioning Unit Reset SATM Selected Area Transfer NA -SRTM tqStatus Reporting TransferReset +SRTM Status Reporting TransferReset TSM Tabulation Stop Reset TTM Transfer Termination NA VEM Vertical Editing NA @@ -223,7 +223,7 @@ cat >> $RES << etx

Special Graphics Characters

If the Special Graphics set is selected, the graphics for ASCII codes -0137 through 0176 will be tqreplaced according to the following table (see the +0137 through 0176 will be replaced according to the following table (see the SCS control sequence). etx diff --git a/konsole/doc/VT100/genTC.pl b/konsole/doc/VT100/genTC.pl index bc06a3cb1..a3a7c5669 100755 --- a/konsole/doc/VT100/genTC.pl +++ b/konsole/doc/VT100/genTC.pl @@ -147,7 +147,7 @@ sub txt2Html return $_; } -sub tqlayout +sub layout { my ($Name, $Head, $Code, $Doku, $Dflt, $Attr) = @_; if ($html) { @@ -234,7 +234,7 @@ print "\n"; print "\n"; } -sub tqlayout2 +sub layout2 { my ($Name, $Head, $Code) = @_; my @Part = split('\|',$Code); my $Type = $#Part > -1 ? $Part[0] : ""; @@ -261,7 +261,7 @@ sub tqlayout2 print "$Head\n"; } -sub tqlayoutTable +sub layoutTable { my ($Head, $t, $Include) = @_; my $p; @@ -276,7 +276,7 @@ foreach $p (sort keys %$t) my $attr = exists $t->{"$name.sect"}?$t->{"$name.sect"}:""; if ($attr =~ /$Include/) { - tqlayout2( $name, $head, exists $t->{"$name.code"}?$t->{"$name.code"}:""); + layout2( $name, $head, exists $t->{"$name.code"}?$t->{"$name.code"}:""); } } } @@ -311,7 +311,7 @@ sub sortTest print "

$Fld[0] codes

\n"; } $curr = $Fld[0]; - tqlayout2($name,$t->{"$name.head"},$p); + layout2($name,$t->{"$name.head"},$p); } print "\n"; } @@ -346,29 +346,29 @@ sortTest($t); secthead("Host to Terminal (Instructions by Group)"); htmlsect("Operations"); print "\n"; -tqlayoutTable("Commands (Character Display Operation)",$t,"Command\.Display"); -tqlayoutTable("Commands (Rendition related status)",$t,"Command\.RenderMode"); -tqlayoutTable("Commands (Cursor)",$t,"Command\.Cursor"); -tqlayoutTable("Commands (Cursor related status)",$t,"Command\.CursMode"); -tqlayoutTable("Commands (Edit)",$t,"Command\.Erase|Command\.Insert|Command.\Delete"); -tqlayoutTable("Commands (Miscellaneous)",$t,"Command[^.]|Command\$"); -tqlayoutTable("Commands (General mode setting)",$t,"Command\.SetMode"); -tqlayoutTable("Commands (Miscellaneous status)",$t,"Command\.Mode"); -tqlayoutTable("Commands (VT52)",$t,"Command\.VT52"); -tqlayoutTable("Commands (Not implemented)",$t,"Command\.NoImp"); -tqlayoutTable("Commands (Ignored)",$t,"Command\.Ignored"); -tqlayoutTable("Commands (Requests)",$t,"Command\.Request"); +layoutTable("Commands (Character Display Operation)",$t,"Command\.Display"); +layoutTable("Commands (Rendition related status)",$t,"Command\.RenderMode"); +layoutTable("Commands (Cursor)",$t,"Command\.Cursor"); +layoutTable("Commands (Cursor related status)",$t,"Command\.CursMode"); +layoutTable("Commands (Edit)",$t,"Command\.Erase|Command\.Insert|Command.\Delete"); +layoutTable("Commands (Miscellaneous)",$t,"Command[^.]|Command\$"); +layoutTable("Commands (General mode setting)",$t,"Command\.SetMode"); +layoutTable("Commands (Miscellaneous status)",$t,"Command\.Mode"); +layoutTable("Commands (VT52)",$t,"Command\.VT52"); +layoutTable("Commands (Not implemented)",$t,"Command\.NoImp"); +layoutTable("Commands (Ignored)",$t,"Command\.Ignored"); +layoutTable("Commands (Requests)",$t,"Command\.Request"); print "
\n"; # ------------------------------- secthead("Terminal to Host"); print "\n"; -tqlayoutTable("Replies",$t,"Reply"); -tqlayoutTable("Events",$t,"Event"); +layoutTable("Replies",$t,"Reply"); +layoutTable("Events",$t,"Event"); # ------------------------------- print "
\n"; secthead("Modes"); print "\n"; -tqlayoutTable("Modes",$t,"Mode"); +layoutTable("Modes",$t,"Mode"); #print "

Other Codes

\n"; print "
\n"; # ------------------------------- @@ -385,7 +385,7 @@ foreach $p (sort keys %$t) # print "\n" if ($table); my $name = $Fld[0]; my $head = $t->{$p}; - tqlayout( $name, $head, + layout( $name, $head, exists $t->{"$name.code"}?$t->{"$name.code"}:"", exists $t->{"$name.text"}?$t->{"$name.text"}:"", exists $t->{"$name.dflt"}?$t->{"$name.dflt"}:"", diff --git a/konsole/doc/VT100/techref.html b/konsole/doc/VT100/techref.html index d16d4804b..6e36f39e5 100644 --- a/konsole/doc/VT100/techref.html +++ b/konsole/doc/VT100/techref.html @@ -90,7 +90,7 @@ Work is currently in progress to fix this issue. The serial cable is folded into the operating system as a sort of loop back device, and a program, the terminal emulation, uses modern means of graphical user interfaces to behave like an earlier terminal. - To complete the picture, the host in the diagram is tqreplaced by the + To complete the picture, the host in the diagram is replaced by the application that runs in the emulation (typically a shell or an old editor). So, terminal emulations are in fact interfaces to character oriented applications. @@ -349,7 +349,7 @@ Work is currently in progress to fix this issue.

The second one is used to specify character set mappings (see SCS). A CSI instruction to do this is specified in ECMA, - and this should be used as a tqreplacement. + and this should be used as a replacement.

XTERM hacks

@@ -498,13 +498,13 @@ Work is currently in progress to fix this issue. CSI n {Ps} -Device tqStatus Report +Device Status Report DSRREP CSI n -{tqStatus} -Device tqStatus Report Reply +{Status} +Device Status Report Reply DECLL CSI @@ -1559,7 +1559,7 @@ Work is currently in progress to fix this issue. CSI n {Ps} -Device tqStatus Report +Device Status Report ENQ CTL @@ -1598,8 +1598,8 @@ Work is currently in progress to fix this issue. DSRREP CSI n -{tqStatus} -Device tqStatus Report Reply +{Status} +Device Status Report Reply

Events

CUB @@ -2234,7 +2234,7 @@ Work is currently in progress to fix this issue.

Causes the VT100 to fill it's screen with - uppercase Es for screen focus and tqalignment. + uppercase Es for screen focus and alignment.

@@ -2403,7 +2403,7 @@ Work is currently in progress to fix this issue. ESC # 6

- This causes the line that tqcontains the cursor to become double-width + This causes the line that contains the cursor to become double-width single height. If the line was single width, all characters ro the right of the center of the screen will be lost. The cursor remains over the same character position, unless it would be to the right of @@ -2883,7 +2883,7 @@ Work is currently in progress to fix this issue. ESC # 5

- This causes the line which tqcontains the cursor to become single-width, + This causes the line which contains the cursor to become single-width, single-height. The cursor remains on the same character position. This is the default condition for all new lines on the screen.

@@ -2974,11 +2974,11 @@ Work is currently in progress to fix this issue. N/AVT100emuIgnoredsee above

DSRREP - Device tqStatus Report Reply + Device Status Report Reply ECMA VT100

- ESC [ tqStatus n + ESC [ Status n

Reports the general status of the VT100 according to the @@ -2989,7 +2989,7 @@ Work is currently in progress to fix this issue.

- tqStatusMeaning + StatusMeaning 0Ready, no faults detected @@ -2998,7 +2998,7 @@ Work is currently in progress to fix this issue. 3Malfunction detected

DSRREQ - Device tqStatus Report + Device Status Report ECMA VT100

@@ -3012,7 +3012,7 @@ Work is currently in progress to fix this issue. SubcodeEmulationScopeOperationArgsMeaning - 5VT100emureporttqStatusReport tqStatus (using a DSRREP control sequence) + 5VT100emureportStatusReport Status (using a DSRREP control sequence) 6VT100emureportCursorPositionReport Active Position (using a CPR sequence) @@ -3740,7 +3740,7 @@ Work is currently in progress to fix this issue. The United Kingdom and ASCII sets conform to the "ISO international register of character sets to be used with escape sequences". The other sets are private character sets. Special graphics means that the - graphic characters fpr the codes 0137 to 0176 are tqreplaced with other + graphic characters fpr the codes 0137 to 0176 are replaced with other characters. The specified character set will be used until another SCS is received.

@@ -4513,12 +4513,12 @@ as noted. FETM Format Effector Transfer Reset GATM Guarded Area Transfer NA HEM Horizontal Editing NA -IRM Insertion-tqreplacement Reset +IRM Insertion-replacement Reset KAM Keyboard Action Reset MATM Multiple area transfer NA PUM Positioning Unit Reset SATM Selected Area Transfer NA -SRTM tqStatus Reporting TransferReset +SRTM Status Reporting TransferReset TSM Tabulation Stop Reset TTM Transfer Termination NA VEM Vertical Editing NA @@ -4542,7 +4542,7 @@ The notation <ESC> denotes a single ASCII Escape character, 1Bx.

Special Graphics Characters

If the Special Graphics set is selected, the graphics for ASCII codes -0137 through 0176 will be tqreplaced according to the following table (see the +0137 through 0176 will be replaced according to the following table (see the SCS control sequence).
-- cgit v1.2.3