Rxvt Technical Reference

Reworked from XTerm documentation and other sources

[No] Frames

Definitions
Values
Escape Sequences
CSI (Code Sequence Introducer) Sequences
DEC Private Modes
XTerm Escape Sequences
menuBar
XPM
Mouse Reporting
Special Graphics Mode
Key Codes

Definitions

c: The literal character c.

C: A single (required) character.

Ps: A single (usually optional) numeric parameter, composed of one or more digits.

Pm: A multiple numeric parameter composed of any number of single numeric parameters, separated by ; character(s).

Pt: A text parameter composed of printable characters.

Values

ENQ: Enquiry (Ctrl-E) = Send Device Attributes (DA)
request attributes from terminal == ESC[c

BEL: Bell (Ctrl-G)

BS: Backspace (Ctrl-H)

TAB: Horizontal Tab (HT) (Ctrl-I)

LF: Line Feed or New Line (NL) (Ctrl-J)

VT: Vertical Tab (Ctrl-K) same as LF

FF: Form Feed or New Page (NP) (Ctrl-L) same as LF

CR: Carriage Return (Ctrl-M)

SO: Shift Out (Ctrl-N), invokes the G1 character set
Switch to Alternate Character Set

SI: Shift In (Ctrl-O), invokes the G0 character set (the default)
Switch to Standard Character Set

SPC: Space Character

Escape Sequences

ESC # 8: DEC Screen Alignment Test (DECALN)

ESC 7 ESC 8: Save Cursor (SC)
Restore Cursor (RC)

ESC = ESC >: Application Keypad (SMKX) == ESC[?66h
Normal Keypad (RMKX) == ESC[?66l

Note: If the numeric keypad is activated, eg, Num_Lock has been pressed, numbers or control functions are generated by the numeric keypad (see Key Codes)

ESC D: Index (IND)

ESC E: Next Line (NEL)

ESC H: Tab Set (HTS)

ESC M: Reverse Index (RI)

ESC N: Single Shift Select of G2 Character Set (SS2): affects next character only unimplemented

ESC O: Single Shift Select of G3 Character Set (SS3): affects next character only unimplemented

ESC Z: Obsolete form of ESC[c
returns: ESC[?1;2C (rxvt compile-time option)

ESC c: Full Reset (RIS)

ESC n: Invoke the G2 Character Set (LS2)

ESC o: Invoke the G3 Character Set (LS3)

ESC ( C ESC ) C ESC * C ESC + C ESC $ C

Designate G0 Character Set (ISO 2022)
Designate G1 Character Set (ISO 2022)
Designate G2 Character Set (ISO 2022)
Designate G3 Character Set (ISO 2022)
Designate Kanji Character Set
where C is

C = 0

C = A

C = B

C = <

unimplemented

C = 5

unimplemented

C = C

unimplemented

C = K

unimplemented

CSI (Code Sequence Introducer) Sequences

ESC [ Ps @: Insert Ps (Blank) Character(s) [default: 1] (ICH)

ESC [ Ps A: Cursor Up Ps Times [default: 1] (CUU)

ESC [ Ps B: Cursor Down Ps Times [default: 1] (CUD)

ESC [ Ps C: Cursor Forward Ps Times [default: 1] (CUF)

ESC [ Ps D: Cursor Backward Ps Times [default: 1] (CUB)

ESC [ Ps E: Cursor Down Ps Times [default: 1] and to first column

ESC [ Ps F: Cursor Up Ps Times [default: 1] and to first column

ESC [ Ps G: Cursor to Column Ps (HPA)

ESC [ Ps;Ps H: Cursor Position [row;column] [default: 1;1] (CUP)

ESC [ Ps I: Move forward Ps tab stops [default: 1]

ESC [ Ps J: Erase in Display (ED)
Ps = 0 : Clear Below (default)
Ps = 1 : Clear Above
Ps = 2 : Clear All

ESC [ Ps K: Erase in Line (EL)
Ps = 0 : Clear to Right (default)
Ps = 1 : Clear to Left (EL1)
Ps = 2 : Clear All

ESC [ Ps L: Insert Ps Line(s) [default: 1] (IL)

ESC [ Ps M: Delete Ps Line(s) [default: 1] (DL)

ESC [ Ps P: Delete Ps Character(s) [default: 1] (DCH)

ESC [ Ps;Ps;Ps;Ps;Ps T: Initiate hilite mouse tracking. unimplemented
Parameters are [func;startx;starty;firstrow;lastrow].

ESC [ Ps W: Tabulator functions
Ps = 0 : Tab Set (HTS)
Ps = 2 : Tab Clear (TBC), Clear Current Column (default)
Ps = 5 : Tab Clear (TBC), Clear All

ESC [ Ps X: Erase Ps Character(s) [default: 1] (ECH)

ESC [ Ps Z: Move backward Ps [default: 1] tab stops

ESC [ Ps ': == ESC [ Ps G

ESC [ Ps a: == ESC [ Ps C

ESC [ Ps c: Send Device Attributes (DA)
Ps = 0 (or omitted) : request attributes from terminal
returns: ESC[?1;2c (``I am a VT100 with Advanced Video Option'')

ESC [ Ps d: Cursor to Line Ps (VPA)

ESC [ Ps e: == ESC [ Ps A

ESC [ Ps;Ps f: Horizontal and Vertical Position [row;column] (HVP)
[default: 1;1]

ESC [ Ps g: Tab Clear (TBC)
Ps = 0 : Clear Current Column (default)
Ps = 3 : Clear All (TBC)

ESC [ Ps i: Printing
Ps = 4 : disable transparent print mode (MC4)
Ps = 5 : enable transparent print mode (MC5) unimplemented

ESC [ Pm h ESC [ Pm l: Set Mode (SM)
Reset Mode (RM)
Ps = 4: h : Insert Mode (SMIR)
l : Replace Mode (RMIR)
Ps = 20 unimplemented: h : Automatic Newline (LNM)
l : Normal Linefeed (LNM)

ESC [ Pm m: Character Attributes (SGR)
Ps = 0 : Normal (default)
Ps = 1 / 22 : On / Off Bold (bright fg)
Ps = 4 / 24 : On / Off Underline
Ps = 5 / 25 : On / Off Blink (bright bg)
Ps = 7 / 27 : On / Off Inverse
Ps = 30 / 40 : fg / bg Black
Ps = 31 / 41 : fg / bg Red
Ps = 32 / 42 : fg / bg Green
Ps = 33 / 43 : fg / bg Yellow
Ps = 34 / 44 : fg / bg Blue
Ps = 35 / 45 : fg / bg Magenta
Ps = 36 / 46 : fg / bg Cyan
Ps = 37 / 47 : fg / bg White
Ps = 39 / 49 : fg / bg Default

ESC [ Ps n: Device Status Report (DSR)
Ps = 5 : Status Report ESC [ 0 n (``OK'')
Ps = 6 : Report Cursor Position (CPR) [row;column] as ESC [ r ; c R
Ps = 7 : Request Display Name
Ps = 8 : Request Version Number (place in window title)

ESC [ Ps;Ps r: Set Scrolling Region [top;bottom]
[default: full size of window] (CSR)

ESC [ Ps x: Request Terminal Parameters (DECREQTPARM)

DEC Private Modes

ESC [ ? Pm h: DEC Private Mode Set (DECSET)

ESC [ ? Pm l: DEC Private Mode Reset (DECRST)

ESC [ ? Pm r: Restore previously saved DEC Private Mode Values.

ESC [ ? Pm s: Save DEC Private Mode Values.

ESC [ ? Pm t: Toggle DEC Private Mode Values (rxvt extension).

where

Ps = 1 (DECCKM): h : Application Cursor Keys
l : Normal Cursor Keys
Ps = 2 unimplemented: h : Designate USASCII for character sets G0-G3.
Ps = 3: h : 132 Column Mode (DECCOLM)
l : 80 Column Mode (DECCOLM)
Ps = 4 unimplemented: h : Smooth (Slow) Scroll (DECSCLM)
l : Jump (Fast) Scroll (DECSCLM)
Ps = 5: h : Reverse Video (DECSCNM)
l : Normal Video (DECSCNM)
Ps = 6: h : Origin Mode (DECOM)
l : Normal Cursor Mode (DECOM)
Ps = 7: h : Wraparound Mode (DECAWM)
l : No Wraparound Mode (DECAWM)
Ps = 8 unimplemented: h : Auto-repeat Keys (DECARM)
l : No Auto-repeat Keys (DECARM)
Ps = 9 (X10 XTerm mouse reporting): h : Send Mouse X & Y on button press.
l : No mouse reporting.
Ps = 10 (rxvt): h : menuBar visisble
l : menuBar invisisble
Ps = 25: h : Visible cursor {cnorm/cvvis}
l : Invisible cursor {civis}
Ps = 30 (rxvt): h : scrollBar visisble
l : scrollBar invisisble
Ps = 35 (rxvt): h : Allow XTerm Shift+key sequences
l : Disallow XTerm Shift+key sequences
Ps = 38 : Enter Tektronix Mode (DECTEK) unimplemented
Ps = 40: h : Allow 80/132 Mode
l : Disallow 80/132 Mode
Ps = 44 unimplemented: h : Turn On Margin Bell
l : Turn Off Margin Bell
Ps = 45 unimplemented: h : Reverse-wraparound Mode
l : No Reverse-wraparound Mode
Ps = 46 unimplemented
Ps = 47: h : Use Alternate Screen Buffer
l : Use Normal Screen Buffer
Ps = 66: h : Application Keypad (DECPAM) == ESC =
l : Normal Keypad (DECPNM) == ESC >
Ps = 67: h : Backspace key sends BS (DECBKM)
l : Backspace key sends DEL
Ps = 1000 (X11 XTerm mouse reporting): h : Send Mouse X & Y on button press and release.
l : No mouse reporting.
Ps = 1001 (X11 XTerm mouse Tracking) unimplemented: h : Use Hilite Mouse Tracking.
l : No mouse reporting.

XTerm Escape Sequences

ESC ] Ps;Pt BEL

Set XTerm Parameters

Ps = 0

Change Icon Name and Window Title to Pt

Ps = 1

Change Icon Name to Pt

Ps = 2

Change Window Title to Pt

Ps = 10

menuBar command Pt (rxvt compile-time option)

Ps = 20

Change default background pixmap to Pt (rxvt compile-time option)

Ps = 39

Change default foreground color to Pt (rxvt compile-time option)

Ps = 46

Change Log File to Pt(normally disabled by a compile-time option) unimplemented

Ps = 49

Change default background color to Pt (rxvt compile-time option)

Ps = 50

Set Font to Pt, with the following special values of Pt (rxvt)
#+n : change up n font(s)
#-n : change down n font(s)

n

empty : change to font0
#n : change to fontn

menuBar

The exact syntax used is almost solidified.
In the menus, DON'T try to use menuBar commands that add or remove a menuBar.

Note that in all of the commands, the /path/ cannot be omitted: use ./ to specify a menu relative to the current menu.

Overview of menuBar operation

For the menuBar XTerm escape sequence ESC ] 10; Pt BEL, the syntax of Pt can be used for a variety of tasks:

Commands
Adding and accessing menus
Removing menus
Quick Arrows
Command Summary

At the top level is the current menuBar which is a member of a circular linked-list of other such menuBars. The menuBar acts as a parent for the various drop-down menus, which in turn, may have labels, separator lines, menuItems and subMenus. The menuItems are the useful bits: you can use them to mimic keyboard input or even to send text or escape sequences back to rxvt. The menuBar syntax is intended to provide a simple yet robust method of constructing and manipulating menus and navigating through the menuBars.

The first step is to use the tag [menu:name] which creates the menuBar called name and allows access. You may now add or remove menus, subMenus, and menuItems. Finally, use the tag [done] to set the menuBar access as readonly to prevent accidental corruption of the menus. To re-access the current menuBar for alterations, use the tag [menu], make the alterations and then use [done]

Commands

[menu:name]: access the named menuBar for creation or alteration. If a new menuBar is created, it is called name (max of 15 chars) and the current menuBar is pushed onto the stack
[menu]: access the current menuBar for alteration
[title:string]: set the current menuBar's title to string, which may contain the following format specifiers:
%% : literal % character
%n : rxvt name (as per the -name command-line option)
%v : rxvt version
[done]: set menuBar access as readonly.
End-of-file tag for [read:file] operations.
[read:file]: read menu commands directly from file (extension ".menu" will be appended if required). Start reading at a line with [menu] or [menu:name] and continuing until [done] is encountered.
Blank and comment lines (starting with #) are ignored. Actually, since any invalid menu commands are also ignored, almost anything could be construed as a comment line, but this may be tightened up in the future ... so don't count on it!.
[read:file;name]: The same as [read:file], but start reading at a line with [menu:name] and continuing until [done:name] or [done] is encountered.
[dump]: dump all menuBars to the file /tmp/rxvt-PID in a format suitable for later rereading.
[rm:name] [rm] [rm:] [rm*] [rm:*]: remove the named menuBar
remove the current menuBar
remove all menuBars
[swap]: swap the top two menuBars
[prev] [next]: access the previous or next menuBar
[show] [hide]: control display of the menuBar ... just like ESC[?10 h/l
[pixmap:name] [pixmap:name;scaling]: set the background pixmap globally ... just like ESC]20; Pt BEL
A Future implementation may make this local to the menubar
[:command:]: ignore the menu readonly status and issue a command to Add/Modify or Remove a menu or menuitem or change the Quick Arrows; a useful shortcut for setting the quick arrows from a menuBar.

Adding and accessing menus

The following commands may also be + prefixed.

/ ./ ../ ../../: access menuBar top level
access current menu level
access parent menu (1 level up)
access parent menu (multiple levels up)
/path/menu: add/access menu
/path/menu/*: add/access menu and clear it if it exists
/path/{-}: add separator
/path/{item}: add item as a label
/path/{item} action: add/alter menuitem with an associated action
/path/{item}{right-text}: add/alter menuitem with right-text as the right-justified text and as the associated action
/path/{item}{rtext} action: add/alter menuitem with an associated action and with rtext as the right-justified text.

Special characters in action must be backslash-escaped:: \a \b \E \e \n \r \t \octal
or in control-character notation:: ^@, ^A .. ^Z .. ^_, ^?

To send a string starting with a NUL (^@) character to the program, start action with a pair of NUL characters (^@^@), the first of which will be stripped off and the balance directed to the program. Otherwise if action begins with NUL followed by non-NUL characters, the leading NUL is stripped off and the balance is sent back to rxvt.

As a convenience for the many Emacs-type editors, action may start with M- (eg, M-$ is equivalent to \E$) and a CR will be appended if missed from M-x commands. As a convenience for issuing XTerm ESC] sequences from a menubar (or quick arrow), a BEL (^G) will be appended if needed.

For example,: M-xapropos
is equivalent to: \Exapropos\r
and: \E]10;mona;100
is equivalent to: \E]10;mona;100\a

The option {right-rtext} will be right-justified. In the absence of a specified action, this text will be used as the action as well.

For example,: /File/{Open}{^X^F}
is equivalent to: /File/{Open){^X^F} ^X^F

The left label is necessary, since it's used for matching, but implicitly hiding the left label (by using same name for both left and right labels), or explicitly hiding the left label (by preceding it with a dot), makes it possible to have right-justified text only.

For example,: /File/{Open}{Open} Open-File-Action
or hiding it: /File/{.anylabel}{Open} Open-File-Action

Removing menus

-/* -/path/menu -/path/{item} -/path/{-}: remove all menus from the menuBar, the same as [clear]
remove menu
remove item
remove separator
-/path/menu/*: remove all items, separators and submenus from menu

Quick Arrows

The menus also provide a hook for quick arrows to provide easier user access. If nothing has been explicitly set, the default is to emulate the curror keys. The syntax permits each arrow to be altered individually or all four at once without re-entering their common beginning/end text. For example, to explicitly associate cursor actions with the arrows, any of the following forms could be used:

<r>Right <l>Left Up <d>Down: Define actions for the respective arrow buttons
Begin <e>End: Define common beginning/end parts for quick arrows when used in conjunction with the above <r> <l> <d> constructs

For example, define arrows individually,: \E[A
<d>\E[B
<r>\E[C
<l>\E[D
or all at once: \E[A<d>\E[B<r>\E[C<l>\E[D
or more compactly (factoring out common parts): \E[A<d>B<r>C<l>D

Command Summary

A short summary of the most common commands:

[menu:name]: use an existing named menuBar or start a new one
[menu]: use the current menuBar
[title:string]: set menuBar title
[done]: set menu access to readonly and, if reading from a file, signal EOF
[done:name]: if reading from a file using [read:file;name] signal EOF
[rm:name] [rm] [rm:] [rm*] [rm:*]: remove named, current, or all menuBar(s)
[swap]: swap top two menuBars
[prev] [next]: access the previous/next menuBar
[show] [hide]: map/unmap menuBar
[pixmap;file] [pixmap;file;scaling]: set a background pixmap
[read:file] [read:file;name]: read in a menu from a file
[dump]: dump out all menuBars to /tmp/rxvt-PID
/
: access menuBar top level
./ ../ ../../: access current or parent menu level
/path/menu: add/access menu
/path/{-}: add separator
/path/{item}{rtext} action: add/alter menu item
({rtext} and/or action, may be omitted)
-/*: remove all menus from the menuBar
-/path/menu: remove menu items, separators and submenus from menu
-/path/menu: remove menu
-/path/{item}: remove item
-/path/{-}: remove separator
Begin<r>Right<l>LeftUp<d>Down<e>End: menu quick arrows

XPM

For the XPM XTerm escape sequence ESC ] 20; Pt BEL then value of Pt can be the name of the background pixmap followed by a sequence of scaling/positioning commands separated by semi-colons. The scaling/positioning commands are as follows:

query scale/position: ?
change scale and position: WxH+X+Y
WxH+X (== WxH+X+X)
WxH (same as WxH+50+50)
W+X+Y (same as WxW+X+Y)
W+X (same as WxW+X+X)
W (same as WxW+50+50)
change position (absolute): =+X+Y
=+X (same as =+X+Y)
change position (relative): +X+Y
+X (same as +X+Y)
rescale (relative): Wx0 -> W *= (W/100)
0xH -> H *= (H/100)

For example:

\E]20;funky\a: load funky.xpm as a tiled image
\E]20;mona;100\a: load mona.xpm with a scaling of 100%
\E]20;;200;?\a: rescale the current pixmap to 200% and display the image geometry in the title

Mouse Reporting

ESC [ M <x> <y>: report mouse position

The lower 2 bits of  indicate the button:

Button =  & 3 - SPACE: 0 = Button1 pressed
1 = Button2 pressed
2 = Button3 pressed
3 = button released (X11 mouse report)

The upper bits of  indicate the modifiers when the button was pressed and are added together (X11 mouse report only):

State =  & 28 - SPACE: 4 = Shift
8 = Meta
16 = Control
Col = <x> - SPACE
Row = <y> - SPACE

Special Graphics Mode

Add more documentation here, if anyone actually cares.

ESC G Q: query if graphics are available
returns: ESC G 0 no graphics available
returns: ESC G 1 graphics available (color only)

ESC G W <x>;<y>;<w>;<h>:: create window

ESC G C <id>: clear window

ESC G G <id>:: query window
returns: ESC G <id> <x> <y> <w> <h> <fw> <fh> <nw> <nh>

ESC G L <id> ESC G P <id> ESC G F <id>: start point
start line
start fill

;<x>;<y>: extend point/line/fill

ESC G T <id>;<x>;<y>;<mode>;<len>:<text>: place text

Key Codes

Note: Shift + F1-F10 generates F11-F20

For the keypad, use Shift to temporarily override Application-Keypad setting use Num_Lock to toggle Application-Keypad setting if Num_Lock is off, escape sequences toggle Application-Keypad setting. Also note that values of Home, End, Delete may have been compiled differently on your system.

Normal Shift Control Ctrl+Shift

Tab ^I ESC [ Z ^I ESC [ Z

BackSpace ^H ^? ^? ^?

Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @

Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @

Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @

Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @

Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @

Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @

Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @

End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @

Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @

F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^

F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^

F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^

F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^

F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^

F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^

F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^

F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^

F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^

F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^

F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @

F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @

F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @

F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @

F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @

F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @

F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @

F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @

F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @

F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @

Application

Up ESC [ A ESC [ a ESC O a ESC O A

Down ESC [ B ESC [ b ESC O b ESC O B

Right ESC [ C ESC [ c ESC O c ESC O C

Left ESC [ D ESC [ d ESC O d ESC O D

KP_Enter ^M ESC O M

KP_F1 ESC O P ESC O P

KP_F2 ESC O Q ESC O Q

KP_F3 ESC O R ESC O R

KP_F4 ESC O S ESC O S

XK_KP_Multiply * ESC O j

XK_KP_Add + ESC O k

XK_KP_Separator , ESC O l

XK_KP_Subtract - ESC O m

XK_KP_Decimal . ESC O n

XK_KP_Divide / ESC O o

XK_KP_0 0 ESC O p

XK_KP_1 1 ESC O q

XK_KP_2 2 ESC O r

XK_KP_3 3 ESC O s

XK_KP_4 4 ESC O t

XK_KP_5 5 ESC O u

XK_KP_6 6 ESC O v

XK_KP_7 7 ESC O w

XK_KP_8 8 ESC O x

XK_KP_9 9 ESC O y

Mark Olesen
Fri Feb 14 14:16:00 1997

	Normal	Shift	Control	Ctrl+Shift
Tab	^I	ESC [ Z	^I	ESC [ Z
BackSpace	^H	^?	^?	^?
Find	ESC [ 1 ~	ESC [ 1 $	ESC [ 1 ^	ESC [ 1 @
Insert	ESC [ 2 ~	paste	ESC [ 2 ^	ESC [ 2 @
Execute	ESC [ 3 ~	ESC [ 3 $	ESC [ 3 ^	ESC [ 3 @
Select	ESC [ 4 ~	ESC [ 4 $	ESC [ 4 ^	ESC [ 4 @
Prior	ESC [ 5 ~	scroll-up	ESC [ 5 ^	ESC [ 5 @
Next	ESC [ 6 ~	scroll-down	ESC [ 6 ^	ESC [ 6 @
Home	ESC [ 7 ~	ESC [ 7 $	ESC [ 7 ^	ESC [ 7 @
End	ESC [ 8 ~	ESC [ 8 $	ESC [ 8 ^	ESC [ 8 @
Delete	ESC [ 3 ~	ESC [ 3 $	ESC [ 3 ^	ESC [ 3 @
F1	ESC [ 11 ~	ESC [ 23 ~	ESC [ 11 ^	ESC [ 23 ^
F2	ESC [ 12 ~	ESC [ 24 ~	ESC [ 12 ^	ESC [ 24 ^
F3	ESC [ 13 ~	ESC [ 25 ~	ESC [ 13 ^	ESC [ 25 ^
F4	ESC [ 14 ~	ESC [ 26 ~	ESC [ 14 ^	ESC [ 26 ^
F5	ESC [ 15 ~	ESC [ 28 ~	ESC [ 15 ^	ESC [ 28 ^
F6	ESC [ 17 ~	ESC [ 29 ~	ESC [ 17 ^	ESC [ 29 ^
F7	ESC [ 18 ~	ESC [ 31 ~	ESC [ 18 ^	ESC [ 31 ^
F8	ESC [ 19 ~	ESC [ 32 ~	ESC [ 19 ^	ESC [ 32 ^
F9	ESC [ 20 ~	ESC [ 33 ~	ESC [ 20 ^	ESC [ 33 ^
F10	ESC [ 21 ~	ESC [ 34 ~	ESC [ 21 ^	ESC [ 34 ^
F11	ESC [ 23 ~	ESC [ 23 $	ESC [ 23 ^	ESC [ 23 @
F12	ESC [ 24 ~	ESC [ 24 $	ESC [ 24 ^	ESC [ 24 @
F13	ESC [ 25 ~	ESC [ 25 $	ESC [ 25 ^	ESC [ 25 @
F14	ESC [ 26 ~	ESC [ 26 $	ESC [ 26 ^	ESC [ 26 @
F15 (Help)	ESC [ 28 ~	ESC [ 28 $	ESC [ 28 ^	ESC [ 28 @
F16 (Menu)	ESC [ 29 ~	ESC [ 29 $	ESC [ 29 ^	ESC [ 29 @
F17	ESC [ 31 ~	ESC [ 31 $	ESC [ 31 ^	ESC [ 31 @
F18	ESC [ 32 ~	ESC [ 32 $	ESC [ 32 ^	ESC [ 32 @
F19	ESC [ 33 ~	ESC [ 33 $	ESC [ 33 ^	ESC [ 33 @
F20	ESC [ 34 ~	ESC [ 34 $	ESC [ 34 ^	ESC [ 34 @
				Application
Up	ESC [ A	ESC [ a	ESC O a	ESC O A
Down	ESC [ B	ESC [ b	ESC O b	ESC O B
Right	ESC [ C	ESC [ c	ESC O c	ESC O C
Left	ESC [ D	ESC [ d	ESC O d	ESC O D
KP_Enter	^M			ESC O M
KP_F1	ESC O P			ESC O P
KP_F2	ESC O Q			ESC O Q
KP_F3	ESC O R			ESC O R
KP_F4	ESC O S			ESC O S
XK_KP_Multiply	*			ESC O j
XK_KP_Add	+			ESC O k
XK_KP_Separator	,			ESC O l
XK_KP_Subtract	-			ESC O m
XK_KP_Decimal	.			ESC O n
XK_KP_Divide	/			ESC O o
XK_KP_0	0			ESC O p
XK_KP_1	1			ESC O q
XK_KP_2	2			ESC O r
XK_KP_3	3			ESC O s
XK_KP_4	4			ESC O t
XK_KP_5	5			ESC O u
XK_KP_6	6			ESC O v
XK_KP_7	7			ESC O w
XK_KP_8	8			ESC O x
XK_KP_9	9			ESC O y