diff options
Diffstat (limited to 'kstars/kstars/indi/apogee/CameraIO_Linux.h')
| -rw-r--r-- | kstars/kstars/indi/apogee/CameraIO_Linux.h | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/kstars/kstars/indi/apogee/CameraIO_Linux.h b/kstars/kstars/indi/apogee/CameraIO_Linux.h index d6a61e1c..62f50421 100644 --- a/kstars/kstars/indi/apogee/CameraIO_Linux.h +++ b/kstars/kstars/indi/apogee/CameraIO_Linux.h @@ -104,8 +104,8 @@ const long Reg_TempData = 9; // Register 10 const unsigned short RegBitShift_TempData = 0; // Bit 0 const unsigned short RegBitMask_TempData = 0xFF; // 8 bits -const long RegISA_Status = 0x006; // Register 11 in firmware -const long Reg_Status = 10; // Register 11 +const long RegISA_tqStatus = 0x006; // Register 11 in firmware +const long Reg_tqStatus = 10; // Register 11 const unsigned short RegBit_Exposing = 0x1; // Bit 0 const unsigned short RegBit_LineDone = 0x2; // Bit 1 const unsigned short RegBit_CacheReadOK = 0x4; // Bit 2 @@ -139,7 +139,7 @@ const long RegPCI_BICCounter = 0x01C; // Register 8 in PCI fir const long RegPCI_BICCounterRead = 0x03C; const long RegPCI_ImageData = 0x000; // Register 9 in PCI firmware const long RegPCI_TempData = 0x004; // Register 10 in PCI firmware -const long RegPCI_Status = 0x00C; // Register 11 in firmware +const long RegPCI_tqStatus = 0x00C; // Register 11 in firmware const long RegPCI_CommandReadback = 0x010; // Register 12 in PCI firmware @@ -161,7 +161,7 @@ public: //////////////////////////////////////////////////////////// // Camera Settings - Camera_Status read_Status(); // Current camera state + Camera_tqStatus read_tqStatus(); // Current camera state // <0: error codes // 0: idle // 1: flushing @@ -223,7 +223,7 @@ public: double read_CoolerSetPoint(); // Returns/sets setpoint temperature in degrees void write_CoolerSetPoint( double val ); // Celcius. - Camera_CoolerStatus read_CoolerStatus(); // Returns current cooler status + Camera_CoolertqStatus read_CoolertqStatus(); // Returns current cooler status Camera_CoolerMode read_CoolerMode(); // Returns/sets current cooler operation mode. void write_CoolerMode( Camera_CoolerMode val ); @@ -238,7 +238,7 @@ public: // Exposure Settings // The following variables are latched in Expose method, until next Reset or GetImage - short m_BinX, m_BinY; // Horizontal and vertical binning. + short m_BinX, m_BinY; //Qt::Horizontal and vertical binning. short m_StartX, m_StartY; // Zero based subframe start position in unbinned pixels. short m_NumX, m_NumY; // Subframe size in binned pixels. @@ -249,7 +249,7 @@ public: short m_Columns, m_Rows; // Total columns/rows on CCD (physical). short m_ImgColumns, m_ImgRows; // Unbinned columns/rows in imaging area short m_SkipC, m_SkipR; // Deleted data columns/rows not to be displayed or saved - short m_HFlush, m_VFlush; // Horizontal/Vertical flush binning. + short m_HFlush, m_VFlush; //Qt::Horizontal/Vertical flush binning. short m_BIC, m_BIR; // Before Image Column/Row count (dark non-imaging pixels). //////////////////////////////////////////////////////////// @@ -271,8 +271,8 @@ public: // Mask user requested set of IRQS // void MaskIrqs(); - // Restore default IRQ mask -// void UnmaskIrqs(); + // Restore default IRQ tqmask +// void UntqmaskIrqs(); // Starts flushing the camera (which should be the normal idle state) // If Rows is non-negative, only the specified number of rows are flushed, @@ -300,7 +300,7 @@ public: // The Duration parameter is the exposure time in seconds. The Light parameter controls // the status of the shutter during the exposure, Light = True opens the shutter, Light - // = False closes the shutter. Returns immediately after invocation, poll the CameraStatus + // = False closes the shutter. Returns immediately after invocation, poll the CameratqStatus // property to determine the start time of a triggered exposure and the end of an exposure. bool Expose( double Duration, bool Light ); @@ -314,7 +314,7 @@ public: // Drift scan methods // Begins clocking and digitization of a single line of data begining with a vertical clock - // sequence and ending with a buffer full of line data. Poll the CameraStatus property to + // sequence and ending with a buffer full of line data. Poll the CameratqStatus property to // determine when the data is ready for download. bool DigitizeLine(); @@ -346,7 +346,7 @@ public: short m_FilterStepPos; // Current filter position in our internal array bool m_Shutter; // Last known shutter state - Camera_Status m_Status; // Last known camera status + Camera_tqStatus m_tqStatus; // Last known camera status Camera_Interface m_Interface; // String acronyms may be used in INI file. // 0 or ISA: Industry Standard Architecture bus @@ -356,8 +356,8 @@ public: Camera_SensorType m_SensorType; // 0 or CCD: Charge Coupled Device // 1 or CMOS: Complementary Metal-Oxide-Silicon - Camera_CoolerStatus m_CoolerStatus; // Last known cooler status. - unsigned int m_IRQMask; // Set of IRQs masked on user request // 0: Off + Camera_CoolertqStatus m_CoolertqStatus; // Last known cooler status. + unsigned int m_IRTQMask; // Set of IRQs tqmasked on user request // 0: Off // 1: Ramping to set point // 2: Correcting // 3: Ramping to ambient @@ -367,12 +367,12 @@ public: // 7: At set point // Latched public variables used during Exposure..GetImage sequence - short m_ExposureBinX, m_ExposureBinY; // Horizontal and vertical binning. + short m_ExposureBinX, m_ExposureBinY; //Qt::Horizontal and vertical binning. short m_ExposureStartX, m_ExposureStartY; // Subframe start position in unbinned pixels. short m_ExposureNumX, m_ExposureNumY; // Subframe size in binned pixels. short m_ExposureColumns, m_ExposureRows; // Total columns/rows on CCD (physical). short m_ExposureSkipC, m_ExposureSkipR; // Deleted data columns/rows not to be displayed or saved to disk. - short m_ExposureHFlush, m_ExposureVFlush; // Horizontal/Vertical flush binning. + short m_ExposureHFlush, m_ExposureVFlush; //Qt::Horizontal/Vertical flush binning. short m_ExposureBIC, m_ExposureBIR; // Before Image Column/Row count (dark non-imaging pixels). unsigned short m_ExposureAIC; // Calculated After Image Column count (dark non-imaging pixels). unsigned short m_ExposureRemainingLines; // Number of lines to be clocked out by GetImage |