summaryrefslogtreecommitdiffstats
path: root/kdvi/dviFile.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'kdvi/dviFile.cpp')
-rw-r--r--kdvi/dviFile.cpp406
1 files changed, 406 insertions, 0 deletions
diff --git a/kdvi/dviFile.cpp b/kdvi/dviFile.cpp
new file mode 100644
index 00000000..521fb39f
--- /dev/null
+++ b/kdvi/dviFile.cpp
@@ -0,0 +1,406 @@
+/*
+ * Copyright (c) 1994 Paul Vojta. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * NOTE:
+ * xdvi is based on prior work as noted in the modification history, below.
+ */
+
+/*
+ * DVI previewer for X.
+ *
+ * Eric Cooper, CMU, September 1985.
+ *
+ * Code derived from dvi-imagen.c.
+ *
+ * Modification history:
+ * 1/1986 Modified for X.10 --Bob Scheifler, MIT LCS.
+ * 7/1988 Modified for X.11 --Mark Eichin, MIT
+ * 12/1988 Added 'R' option, toolkit, magnifying glass
+ * --Paul Vojta, UC Berkeley.
+ * 2/1989 Added tpic support --Jeffrey Lee, U of Toronto
+ * 4/1989 Modified for System V --Donald Richardson, Clarkson Univ.
+ * 3/1990 Added VMS support --Scott Allendorf, U of Iowa
+ * 7/1990 Added reflection mode --Michael Pak, Hebrew U of Jerusalem
+ * 1/1992 Added greyscale code --Till Brychcy, Techn. Univ. Muenchen
+ * and Lee Hetherington, MIT
+ * 4/1994 Added DPS support, bounding box
+ * --Ricardo Telichevesky
+ * and Luis Miguel Silveira, MIT RLE.
+ */
+
+#include <config.h>
+
+#include <kdebug.h>
+#include <klocale.h>
+#include <ktempfile.h>
+#include <qdir.h>
+#include <qfileinfo.h>
+#include <stdlib.h>
+#include <kprocio.h>
+
+extern "C" {
+#include "dvi.h"
+}
+
+#include "../kviewshell/pageSize.h"
+#include "dviFile.h"
+#include "fontpool.h"
+#include "xdvi.h"
+
+
+dvifile::dvifile(const dvifile *old, fontPool *fp)
+{
+ errorMsg = QString::null;
+ errorCounter = 0;
+ page_offset = 0;
+ suggestedPageSize = 0;
+ numberOfExternalPSFiles = 0;
+ numberOfExternalNONPSFiles = 0;
+ sourceSpecialMarker = old->sourceSpecialMarker;
+
+ dviData = old->dviData.copy();
+
+ filename = old->filename;
+ size_of_file = old->size_of_file;
+ end_pointer = dvi_Data()+size_of_file;
+ if (dvi_Data() == 0) {
+ kdError(4300) << "Not enough memory to copy the DVI-file." << endl;
+ return;
+ }
+
+ font_pool = fp;
+ filename = old->filename;
+ generatorString = old->generatorString;
+ total_pages = old->total_pages;
+
+
+ tn_table.clear();
+ process_preamble();
+ find_postamble();
+ read_postamble();
+ prepare_pages();
+}
+
+
+void dvifile::process_preamble()
+{
+ command_pointer = dvi_Data();
+
+ Q_UINT8 magic_number = readUINT8();
+ if (magic_number != PRE) {
+ errorMsg = i18n("The DVI file does not start with the preamble.");
+ return;
+ }
+ magic_number = readUINT8();
+ if (magic_number != 2) {
+ errorMsg = i18n("The DVI file contains the wrong version of DVI output for this program. "
+ "Hint: If you use the typesetting system Omega, you have to use a special "
+ "program, such as oxdvi.");
+ return;
+ }
+
+ /** numerator, denominator and the magnification value that describe
+ how many centimeters there are in one TeX unit, as explained in
+ section A.3 of the DVI driver standard, Level 0, published by
+ the TUG DVI driver standards committee. */
+ Q_UINT32 numerator = readUINT32();
+ Q_UINT32 denominator = readUINT32();
+ _magnification = readUINT32();
+
+ cmPerDVIunit = (double(numerator) / double(denominator)) * (double(_magnification) / 1000.0) * (1.0 / 1e5);
+
+
+ // Read the generatorString (such as "TeX output ..." from the
+ // DVI-File). The variable "magic_number" holds the length of the
+ // string.
+ char job_id[300];
+ magic_number = readUINT8();
+ strncpy(job_id, (char *)command_pointer, magic_number);
+ job_id[magic_number] = '\0';
+ generatorString = job_id;
+}
+
+
+/** find_postamble locates the beginning of the postamble and leaves
+ the file ready to start reading at that location. */
+
+void dvifile::find_postamble()
+{
+ // Move backwards through the TRAILER bytes
+ command_pointer = dvi_Data() + size_of_file - 1;
+ while((*command_pointer == TRAILER) && (command_pointer > dvi_Data()))
+ command_pointer--;
+ if (command_pointer == dvi_Data()) {
+ errorMsg = i18n("The DVI file is badly corrupted. KDVI was not able to find the postamble.");
+ return;
+ }
+
+ // And this is finally the pointer to the beginning of the postamble
+ command_pointer -= 4;
+ beginning_of_postamble = readUINT32();
+ command_pointer = dvi_Data() + beginning_of_postamble;
+}
+
+
+void dvifile::read_postamble()
+{
+ Q_UINT8 magic_byte = readUINT8();
+ if (magic_byte != POST) {
+ errorMsg = i18n("The postamble does not begin with the POST command.");
+ return;
+ }
+ last_page_offset = readUINT32();
+
+ // Skip the numerator, denominator and magnification, the largest
+ // box height and width and the maximal depth of the stack. These
+ // are not used at the moment.
+ command_pointer += 4 + 4 + 4 + 4 + 4 + 2;
+
+ // The number of pages is more interesting for us.
+ total_pages = readUINT16();
+
+ // As a next step, read the font definitions.
+ Q_UINT8 cmnd = readUINT8();
+ while (cmnd >= FNTDEF1 && cmnd <= FNTDEF4) {
+ Q_UINT32 TeXnumber = readUINT(cmnd-FNTDEF1+1);
+ Q_UINT32 checksum = readUINT32(); // Checksum of the font, as found by TeX in the TFM file
+
+ // Read scale and design factor, and the name of the font. All
+ // these are explained in section A.4 of the DVI driver standard,
+ // Level 0, published by the TUG DVI driver standards committee
+ Q_UINT32 scale = readUINT32();
+ Q_UINT32 design = readUINT32();
+ Q_UINT16 len = readUINT8() + readUINT8(); // Length of the font name, including the directory name
+ char *fontname = new char[len + 1];
+ strncpy(fontname, (char *)command_pointer, len );
+ fontname[len] = '\0';
+ command_pointer += len;
+
+#ifdef DEBUG_FONTS
+ kdDebug(4300) << "Postamble: define font \"" << fontname << "\" scale=" << scale << " design=" << design << endl;
+#endif
+
+ // According to section A.4 of the DVI driver standard, this font
+ // shall be enlarged by the following factor before it is used.
+ double enlargement_factor = (double(scale) * double(_magnification))/(double(design) * 1000.0);
+
+ if (font_pool != 0) {
+ TeXFontDefinition *fontp = font_pool->appendx(fontname, checksum, scale, enlargement_factor);
+
+ // Insert font in dictionary and make sure the dictionary is big
+ // enough.
+ if (tn_table.size()-2 <= tn_table.count())
+ // Not quite optimal. The size of the dictionary should be a
+ // prime for optimal performance. I don't care.
+ tn_table.resize(tn_table.size()*2);
+ tn_table.insert(TeXnumber, fontp);
+ }
+
+ // Read the next command
+ cmnd = readUINT8();
+ }
+
+ if (cmnd != POSTPOST) {
+ errorMsg = i18n("The postamble contained a command other than FNTDEF.");
+ return;
+ }
+
+ // Now we remove all those fonts from the memory which are no longer
+ // in use.
+ if (font_pool != 0)
+ font_pool->release_fonts();
+}
+
+
+void dvifile::prepare_pages()
+{
+#ifdef DEBUG_DVIFILE
+ kdDebug(4300) << "prepare_pages" << endl;
+#endif
+
+ if (page_offset.resize(total_pages+1) == false) {
+ kdError(4300) << "No memory for page list!" << endl;
+ return;
+ }
+ for(int i=0; i<=total_pages; i++)
+ page_offset[i] = 0;
+
+
+ page_offset[total_pages] = beginning_of_postamble;
+ Q_UINT16 i = total_pages-1;
+ page_offset[i] = last_page_offset;
+
+ // Follow back pointers through pages in the DVI file, storing the
+ // offsets in the page_offset table.
+ while (i > 0) {
+ command_pointer = dvi_Data() + page_offset[i--];
+ if (readUINT8() != BOP) {
+ errorMsg = i18n("The page %1 does not start with the BOP command.").arg(i+1);
+ return;
+ }
+ command_pointer += 10 * 4;
+ page_offset[i] = readUINT32();
+ if ((dvi_Data()+page_offset[i] < dvi_Data())||(dvi_Data()+page_offset[i] > dvi_Data()+size_of_file))
+ break;
+ }
+}
+
+
+dvifile::dvifile(const QString& fname, fontPool* pool)
+{
+#ifdef DEBUG_DVIFILE
+ kdDebug(4300) << "init_dvi_file: " << fname << endl;
+#endif
+
+ errorMsg = QString::null;
+ errorCounter = 0;
+ page_offset = 0;
+ suggestedPageSize = 0;
+ numberOfExternalPSFiles = 0;
+ numberOfExternalNONPSFiles = 0;
+ font_pool = pool;
+ sourceSpecialMarker = true;
+
+ QFile file(fname);
+ filename = file.name();
+ file.open( IO_ReadOnly );
+ size_of_file = file.size();
+ dviData.resize(size_of_file);
+ // Sets the end pointer for the bigEndianByteReader so that the
+ // whole memory buffer is readable
+ end_pointer = dvi_Data()+size_of_file;
+ if (dvi_Data() == 0) {
+ kdError() << i18n("Not enough memory to load the DVI-file.");
+ return;
+ }
+ file.readBlock((char *)dvi_Data(), size_of_file);
+ file.close();
+ if (file.status() != IO_Ok) {
+ kdError() << i18n("Could not load the DVI-file.");
+ return;
+ }
+
+ tn_table.clear();
+
+ process_preamble();
+ find_postamble();
+ read_postamble();
+ prepare_pages();
+
+ return;
+}
+
+
+dvifile::~dvifile()
+{
+#ifdef DEBUG_DVIFILE
+ kdDebug(4300) << "destroy dvi-file" << endl;
+#endif
+
+ // Delete converted PDF files
+ QMap<QString, QString>::Iterator it;
+ for ( it = convertedFiles.begin(); it != convertedFiles.end(); ++it )
+ QFile::remove(it.data());
+
+ if (suggestedPageSize != 0)
+ delete suggestedPageSize;
+ if (font_pool != 0)
+ font_pool->mark_fonts_as_unused();
+}
+
+
+void dvifile::renumber()
+{
+ dviData.detach();
+
+ // Write the page number to the file, taking good care of byte
+ // orderings.
+ int wordSize;
+ bool bigEndian;
+ qSysInfo (&wordSize, &bigEndian);
+
+ for(Q_UINT32 i=1; i<=total_pages; i++) {
+ Q_UINT8 *ptr = dviData.data() + page_offset[i-1]+1;
+ Q_UINT8 *num = (Q_UINT8 *)&i;
+ for(Q_UINT8 j=0; j<4; j++)
+ if (bigEndian) {
+ *(ptr++) = num[0];
+ *(ptr++) = num[1];
+ *(ptr++) = num[2];
+ *(ptr++) = num[3];
+ } else {
+ *(ptr++) = num[3];
+ *(ptr++) = num[2];
+ *(ptr++) = num[1];
+ *(ptr++) = num[0];
+ }
+ }
+}
+
+
+QString dvifile::convertPDFtoPS(const QString &PDFFilename)
+{
+ // Check if the PDFFile is known
+ QMap<QString, QString>::Iterator it = convertedFiles.find(PDFFilename);
+ if (it != convertedFiles.end()) {
+ // PDF-File is known. Good.
+ return it.data();
+ }
+
+ // Get the name of a temporary file
+ KTempFile tmpfile(QString::null, ".ps");
+ QString convertedFileName = tmpfile.name();
+ tmpfile.close();
+ tmpfile.unlink();
+
+ // Use pdf2ps to do the conversion
+ KProcIO proc;
+ proc << "pdf2ps" << PDFFilename << convertedFileName;
+ if (proc.start(KProcess::Block) == false)
+ convertedFileName = QString::null; // Indicates that conversion failed, won't try again.
+ if (!QFile::exists(convertedFileName))
+ convertedFileName = QString::null; // Indicates that conversion failed, won't try again.
+
+ // Save name of converted file to buffer, so PDF file won't be
+ // converted again, and files can be deleted when *this is
+ // deconstructed.
+ convertedFiles[PDFFilename] = convertedFileName;
+
+ return convertedFileName;
+}
+
+
+bool dvifile::saveAs(const QString &filename)
+{
+ if (dvi_Data() == 0)
+ return false;
+
+ QFile out(filename);
+ if (out.open( IO_Raw|IO_WriteOnly ) == false)
+ return false;
+ if (out.writeBlock ( (char *)(dvi_Data()), size_of_file ) == -1)
+ return false;
+ out.close();
+ return true;
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-23 15:23:25 +0000