summaryrefslogtreecommitdiffstats
path: root/doc/kdevelop/kdevelop-install.docbook
diff options
context:
space:
mode:
Diffstat (limited to 'doc/kdevelop/kdevelop-install.docbook')
-rw-r--r--doc/kdevelop/kdevelop-install.docbook190
1 files changed, 95 insertions, 95 deletions
diff --git a/doc/kdevelop/kdevelop-install.docbook b/doc/kdevelop/kdevelop-install.docbook
index 028f5e10..62123433 100644
--- a/doc/kdevelop/kdevelop-install.docbook
+++ b/doc/kdevelop/kdevelop-install.docbook
@@ -1,4 +1,4 @@
-<appendix id="kdevelop-install">
+<appendix id="tdevelop-install">
<appendixinfo>
<authorgroup>
@@ -8,54 +8,54 @@
</authorgroup>
</appendixinfo>
-<title>Installing &kdevelop;</title>
+<title>Installing &tdevelop;</title>
-<indexterm zone="kdevelop-install">
+<indexterm zone="tdevelop-install">
<primary>installation</primary></indexterm>
<para>
-In this chapter we will discuss the steps necessary to compile and install the &kdevelop; IDE:
+In this chapter we will discuss the steps necessary to compile and install the &tdevelop; IDE:
<itemizedlist>
<listitem><para>
- <link linkend="kdevelop-install-howto">How to obtain &kdevelop;</link> mainly concentrates on downloading the most recent &kdevelop; sources from svn.
+ <link linkend="tdevelop-install-howto">How to obtain &tdevelop;</link> mainly concentrates on downloading the most recent &tdevelop; sources from svn.
</para></listitem>
<listitem><para>
- <link linkend="requirements">&kdevelop; requirements</link> lists the programs and libraries which you need installed to successfully compile the IDE.
+ <link linkend="requirements">&tdevelop; requirements</link> lists the programs and libraries which you need installed to successfully compile the IDE.
</para></listitem>
<listitem><para>
- <link linkend="compile-and-install">&kdevelop; compilation and installation</link> leads you through all the steps of compilation and installation of the application.
+ <link linkend="compile-and-install">&tdevelop; compilation and installation</link> leads you through all the steps of compilation and installation of the application.
</para></listitem>
<listitem><para>
-<link linkend="make-api">How to obtain a &kdevelop; &API; documentation</link> tells what an API is and how you get such a useful tool for navigating the &kdevelop; sources.
+<link linkend="make-api">How to obtain a &tdevelop; &API; documentation</link> tells what an API is and how you get such a useful tool for navigating the &tdevelop; sources.
</para></listitem>
</itemizedlist>
</para>
-<sect1 id="kdevelop-install-howto">
-<title>How to Obtain &kdevelop;</title>
+<sect1 id="tdevelop-install-howto">
+<title>How to Obtain &tdevelop;</title>
-<indexterm zone="kdevelop-install-howto">
- <primary>obtain &kdevelop;</primary></indexterm>
-<indexterm zone="kdevelop-install-howto">
- <primary>&kdevelop;</primary>
+<indexterm zone="tdevelop-install-howto">
+ <primary>obtain &tdevelop;</primary></indexterm>
+<indexterm zone="tdevelop-install-howto">
+ <primary>&tdevelop;</primary>
<secondary>obtain</secondary></indexterm>
<para>
-&kdevelop; is available in binary form from many different &Linux; distributions such as <!--&SuSE;, &RedHat;//--> SuSE, RedHat and others. These binaries are packed in some convenient format, mostly RPM, for easy installation. To install, follow the standard instructions given in your distribution.
+&tdevelop; is available in binary form from many different &Linux; distributions such as <!--&SuSE;, &RedHat;//--> SuSE, RedHat and others. These binaries are packed in some convenient format, mostly RPM, for easy installation. To install, follow the standard instructions given in your distribution.
</para>
<para>
-You may as well obtain the &kdevelop; sources, compile and install them by yourself. These sources can be found via the project home page at <ulink url="http://www.kdevelop.org"> http://www.kdevelop.org</ulink> or via the <ulink url="http://download.kde.org">&kde; ftp site</ulink>.
+You may as well obtain the &tdevelop; sources, compile and install them by yourself. These sources can be found via the project home page at <ulink url="http://www.tdevelop.org"> http://www.tdevelop.org</ulink> or via the <ulink url="http://download.kde.org">&kde; ftp site</ulink>.
</para>
<sect2 id="howto-svn">
-<title>Get Daily &kdevelop; Snapshots from svn</title>
+<title>Get Daily &tdevelop; Snapshots from svn</title>
<indexterm zone="howto-svn">
<primary>svn</primary></indexterm>
<para>If you want to be in front of current development, anonymous svn repository snapshots are available.</para>
-<para>The module name is <emphasis>kdevelop</emphasis> at <filename class="directory">svn co svn://anonsvn.kde.org/home/kde/branches/KDE/3.5/kdevelop</filename>.
+<para>The module name is <emphasis>tdevelop</emphasis> at <filename class="directory">svn co svn://anonsvn.kde.org/home/kde/branches/KDE/3.5/tdevelop</filename>.
</para>
<sect3 id="howto-svn-co">
@@ -64,16 +64,16 @@ You may as well obtain the &kdevelop; sources, compile and install them by yours
<indexterm zone="howto-svn-co">
<primary>checkout</primary></indexterm>
<indexterm zone="howto-svn-co">
- <primary>&kdevelop;</primary>
+ <primary>&tdevelop;</primary>
<secondary>svn</secondary>
<tertiary>checkout</tertiary></indexterm>
<para>
-To obtain an initial version of &kdevelop; you must download it from anonymous svn. For this so-called <emphasis>checkout</emphasis> operation follow these steps.
+To obtain an initial version of &tdevelop; you must download it from anonymous svn. For this so-called <emphasis>checkout</emphasis> operation follow these steps.
</para>
<note><para>
-We assume you want to put your &kdevelop; copy into the <filename class="directory">trinitysrc</filename> subdirectory of your home directory (<filename class="directory">~</filename>).
+We assume you want to put your &tdevelop; copy into the <filename class="directory">trinitysrc</filename> subdirectory of your home directory (<filename class="directory">~</filename>).
</para></note>
<informalexample><simplelist>
@@ -90,24 +90,24 @@ We assume you want to put your &kdevelop; copy into the <filename class="directo
</member>
<member>
<prompt>~/trinitysrc&gt; </prompt>
- <userinput>svn co svn://anonsvn.kde.org/home/kde/branches/KDE/3.5/kdevelop</userinput>
+ <userinput>svn co svn://anonsvn.kde.org/home/kde/branches/KDE/3.5/tdevelop</userinput>
</member>
<member>
<prompt>~/trinitysrc&gt; </prompt>
- <userinput>cd kdevelop</userinput>
+ <userinput>cd tdevelop</userinput>
</member>
</simplelist></informalexample>
<note><para>
- Once you have successfully checked out your &kdevelop; version, you may keep up with the changes using the update procedure shown in the next section.
+ Once you have successfully checked out your &tdevelop; version, you may keep up with the changes using the update procedure shown in the next section.
</para></note>
<important><para>
- Keep the server load low. <emphasis>Please do not checkout every time you want to keep your &kdevelop; up to date!</emphasis> Use svn update for this purpose.
+ Keep the server load low. <emphasis>Please do not checkout every time you want to keep your &tdevelop; up to date!</emphasis> Use svn update for this purpose.
</para></important>
<para>
-Now you may compile your &kdevelop; version as shown in the <link linkend="compile-and-install">&kdevelop; Compilation and Installation</link> section.
+Now you may compile your &tdevelop; version as shown in the <link linkend="compile-and-install">&tdevelop; Compilation and Installation</link> section.
</para>
</sect3> <!-- howto-svn-co -->
@@ -118,12 +118,12 @@ Now you may compile your &kdevelop; version as shown in the <link linkend="compi
<indexterm zone="howto-svn-up">
<primary>update</primary></indexterm>
<indexterm zone="howto-svn-up">
- <primary>&kdevelop;</primary>
+ <primary>&tdevelop;</primary>
<secondary>svn</secondary>
<tertiary>update</tertiary></indexterm>
<para>
-After you checked out (and successfully compiled) &kdevelop; from svn as shown above, you'll want to keep it up to date in order to get all the patches. Follow these steps. (We again assume you have put your &kdevelop; copy into the <filename class="directory">trinitysrc</filename> directory.)
+After you checked out (and successfully compiled) &tdevelop; from svn as shown above, you'll want to keep it up to date in order to get all the patches. Follow these steps. (We again assume you have put your &tdevelop; copy into the <filename class="directory">trinitysrc</filename> directory.)
</para>
<para>
Note the <command>up</command> (= <emphasis>update</emphasis>) command instead of the <command>co</command> (which stands for <emphasis>checkout</emphasis>).
@@ -136,7 +136,7 @@ Note the <command>up</command> (= <emphasis>update</emphasis>) command instead o
</member>
<member>
<prompt>~/trinitysrc&gt; </prompt>
- <userinput>cd kdevelop</userinput>
+ <userinput>cd tdevelop</userinput>
</member>
<member>
<prompt>~/trinitysrc&gt; </prompt>
@@ -149,7 +149,7 @@ Keep an eye on the messages svn produces during the update sequence. The exact s
</para></note>
<para>
-Now you can compile a new &kdevelop; version as shown in the <link linkend="compile-and-install-make-svn">Special svn compilation considerations</link> chapter.
+Now you can compile a new &tdevelop; version as shown in the <link linkend="compile-and-install-make-svn">Special svn compilation considerations</link> chapter.
</para>
</sect3> <!-- howto-svn-up -->
@@ -160,19 +160,19 @@ Now you can compile a new &kdevelop; version as shown in the <link linkend="comp
<!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
<sect1 id="requirements">
-<title>&kdevelop; Requirements</title>
+<title>&tdevelop; Requirements</title>
<indexterm zone="requirements">
<primary>requirements</primary></indexterm>
<indexterm zone="requirements">
- <primary>&kdevelop;</primary>
+ <primary>&tdevelop;</primary>
<secondary>requirements</secondary></indexterm>
<indexterm zone="requirements">
<primary>GNU</primary>
<secondary>requirements</secondary></indexterm>
<para>
-In order to successfully compile and use &kdevelop;, you need the following programs and libraries. They are available on most platforms as distribution packages and thereby can be installed easily.
+In order to successfully compile and use &tdevelop;, you need the following programs and libraries. They are available on most platforms as distribution packages and thereby can be installed easily.
</para>
<itemizedlist>
@@ -306,7 +306,7 @@ In order to successfully compile and use &kdevelop;, you need the following prog
<orderedlist>
<listitem>
<para>
- You can, to a certain extent, circumvent the need for &autoconf; &ge; 2.52 and &automake; &ge; 1.6. Just remove the <filename class="directory">admin</filename> directory in your &kdevelop; installation directory and type
+ You can, to a certain extent, circumvent the need for &autoconf; &ge; 2.52 and &automake; &ge; 1.6. Just remove the <filename class="directory">admin</filename> directory in your &tdevelop; installation directory and type
<indexterm>
<primary>autoconf</primary>
<secondary>circumvent version need</secondary></indexterm>
@@ -318,16 +318,16 @@ In order to successfully compile and use &kdevelop;, you need the following prog
<secondary>circumvent for autoconf/automake</secondary></indexterm>
</para>
<informalexample><simplelist>
- <member><prompt>(your-kdevelop-directory)&gt; </prompt>
- <userinput>ln -s $KDEDIR/share/apps/kdelibs/admin admin</userinput></member>
+ <member><prompt>(your-tdevelop-directory)&gt; </prompt>
+ <userinput>ln -s $KDEDIR/share/apps/tdelibs/admin admin</userinput></member>
</simplelist></informalexample>
<para>
- at the console. This causes &kdevelop; to use the standard settings in the &kde; <filename class="directory">admin</filename> directory instead.
+ at the console. This causes &tdevelop; to use the standard settings in the &kde; <filename class="directory">admin</filename> directory instead.
</para>
</listitem>
<listitem>
<para>
- Be careful <emphasis>not to mix &Qt; versions</emphasis>. Always link &kdevelop; to the same &Qt; version your &kde; library was compiled. Otherwise you will most likely experience <emphasis>very strange</emphasis> behaviours.
+ Be careful <emphasis>not to mix &Qt; versions</emphasis>. Always link &tdevelop; to the same &Qt; version your &kde; library was compiled. Otherwise you will most likely experience <emphasis>very strange</emphasis> behaviours.
</para>
</listitem>
</orderedlist>
@@ -338,27 +338,27 @@ In order to successfully compile and use &kdevelop;, you need the following prog
<!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
<sect1 id="compile-and-install">
-<title>&kdevelop; Compilation and Installation</title>
+<title>&tdevelop; Compilation and Installation</title>
<indexterm zone="compile-and-install">
- <primary>&kdevelop;</primary>
+ <primary>&tdevelop;</primary>
<secondary>compilation</secondary></indexterm>
<indexterm zone="compile-and-install">
- <primary>&kdevelop;</primary>
+ <primary>&tdevelop;</primary>
<secondary>installation</secondary></indexterm>
<para>
-Once all requirements are met, you are ready to compile and install &kdevelop;. This appendix will discuss the necessary steps to do so.
+Once all requirements are met, you are ready to compile and install &tdevelop;. This appendix will discuss the necessary steps to do so.
</para>
<itemizedlist>
<listitem><para>
<link linkend="compile-and-install-preliminaries">Preliminary Steps</link> tells you about setting up a proper environment.
</para></listitem>
<listitem><para>
- <link linkend="compile-and-install-make">Compile &kdevelop;</link> deals with obtaining the &kdevelop; sources from svn, how to prepare them for the installation process, and finally shows the steps necessary to compile and install &kdevelop;.
+ <link linkend="compile-and-install-make">Compile &tdevelop;</link> deals with obtaining the &tdevelop; sources from svn, how to prepare them for the installation process, and finally shows the steps necessary to compile and install &tdevelop;.
</para></listitem>
<listitem><para>
- <link linkend="compile-and-install-options">Some Notes on configure Options</link> tells you how to run &kdevelop; if it has been installed in a location other than the &kde; directory.
+ <link linkend="compile-and-install-options">Some Notes on configure Options</link> tells you how to run &tdevelop; if it has been installed in a location other than the &kde; directory.
</para></listitem>
</itemizedlist>
@@ -367,7 +367,7 @@ Once all requirements are met, you are ready to compile and install &kdevelop;.
<indexterm zone="compile-and-install-preliminaries">
<primary>preliminaries</primary>
- <secondary>&kdevelop; installation</secondary></indexterm>
+ <secondary>&tdevelop; installation</secondary></indexterm>
<indexterm zone="compile-and-install-preliminaries">
<primary>KDEDIR</primary></indexterm>
<indexterm zone="compile-and-install-preliminaries">
@@ -426,24 +426,24 @@ If you use the tcsh shell add the following lines:
</sect2> <!-- compile-and-install-preliminaries -->
<sect2 id="compile-and-install-make">
-<title>Compile &kdevelop;</title>
+<title>Compile &tdevelop;</title>
<indexterm zone="compile-and-install-make">
<primary>make</primary>
- <secondary>&kdevelop; installation</secondary></indexterm>
+ <secondary>&tdevelop; installation</secondary></indexterm>
<indexterm zone="compile-and-install-make">
<primary>compiling</primary>
- <secondary>&kdevelop;</secondary></indexterm>
+ <secondary>&tdevelop;</secondary></indexterm>
<note><para>
-In the following discussion we assume that you have put your &kdevelop; sources in the <filename class="directory">~/trinitysrc/kdevelop</filename> directory.
+In the following discussion we assume that you have put your &tdevelop; sources in the <filename class="directory">~/trinitysrc/tdevelop</filename> directory.
</para></note>
<sect3 id="compile-and-install-make-svn">
<title>Special svn Compilation Considerations</title>
<para>
-In case you use a &kdevelop; snapshot from svn the initial compilation steps depend on whether you just did a complete checkout or only updated the source.
+In case you use a &tdevelop; snapshot from svn the initial compilation steps depend on whether you just did a complete checkout or only updated the source.
</para>
<variablelist>
@@ -455,7 +455,7 @@ You must <emphasis>initialize the make system</emphasis> after a fresh checkout.
</para>
<informalexample><simplelist><member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>make -f admin/Makefile.common svn-clean</userinput>
</member></simplelist></informalexample>
<para>
@@ -484,7 +484,7 @@ U /some_directory_path/Makefile.am
or if you just did a full checkout, you must enter:
</para>
<informalexample><simplelist><member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>make -f Makefile.svn</userinput>
</member></simplelist></informalexample>
<para>
@@ -499,11 +499,11 @@ before you proceed with <emphasis>all of the following steps</emphasis>.
<title>Basic <command>make</command> Command Sequence</title>
<para>
-Once the basic make system is set up you must decide which type of the &kdevelop; system you want to use. This is done in the following configure step which builds the actual <filename>Makefile</filename>s the <command>make</command> command will use.
+Once the basic make system is set up you must decide which type of the &tdevelop; system you want to use. This is done in the following configure step which builds the actual <filename>Makefile</filename>s the <command>make</command> command will use.
</para>
<note><para>
-You may drop the <option>--prefix</option> option in the following <command>configure</command> command lines if you want &kdevelop; be installed in the default &kde; directory. See the <link linkend="compile-and-install-options">Some notes on configure options</link> chapter for this.
+You may drop the <option>--prefix</option> option in the following <command>configure</command> command lines if you want &tdevelop; be installed in the default &kde; directory. See the <link linkend="compile-and-install-options">Some notes on configure options</link> chapter for this.
</para></note>
<variablelist>
@@ -511,11 +511,11 @@ You may drop the <option>--prefix</option> option in the following <command>conf
<term>A Debug-Compiled Version</term>
<listitem>
<para>
-If you want to keep track of what your &kdevelop; application does at run-time you may build a debug-compiled version. Just command <command>configure</command> to do so:
+If you want to keep track of what your &tdevelop; application does at run-time you may build a debug-compiled version. Just command <command>configure</command> to do so:
</para>
<informalexample><simplelist><member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>./configure --enable-debug=full --prefix=</userinput>(where-your-trinity-is)
</member></simplelist></informalexample>
</listitem>
@@ -524,64 +524,64 @@ If you want to keep track of what your &kdevelop; application does at run-time y
<varlistentry>
<term>A Release-Compiled Version</term>
<listitem>
-<para>If you only want to use &kdevelop; as-is a (smaller and faster
+<para>If you only want to use &tdevelop; as-is a (smaller and faster
running) release version suffices. <command>configure</command> defaults to
this.</para>
<informalexample><simplelist><member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>./configure --prefix=</userinput>(where-your-trinity-is)
</member></simplelist></informalexample>
<note>
<para>
-If you want to build your own <link linkend="make-api">API documentation</link> for &kdevelop; you must include yet another option in the <command>configure</command> command:
+If you want to build your own <link linkend="make-api">API documentation</link> for &tdevelop; you must include yet another option in the <command>configure</command> command:
</para>
<informalexample><simplelist>
- <member><prompt>~/trinitysrc/kdevelop&gt; </prompt>
- <userinput>./configure --</userinput>(options-as-above) <userinput>\</userinput></member> <member><userinput>--with-kdelibsdoxy-dir=$KDEDIR/share/doc/HTML/en/kdelibs-apidocs</userinput></member>
+ <member><prompt>~/trinitysrc/tdevelop&gt; </prompt>
+ <userinput>./configure --</userinput>(options-as-above) <userinput>\</userinput></member> <member><userinput>--with-tdelibsdoxy-dir=$KDEDIR/share/doc/HTML/en/tdelibs-apidocs</userinput></member>
</simplelist></informalexample>
</note>
</listitem>
</varlistentry>
<varlistentry>
-<term>Make and Install &kdevelop;</term>
+<term>Make and Install &tdevelop;</term>
<listitem>
<para>
<command>configure</command> will check the system and build some <filename>Makefile</filename>s according to what it found. The <command>make</command> command will use the main <filename>Makefile</filename> by default. Thus
</para>
<informalexample><simplelist><member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>make</userinput>
</member></simplelist></informalexample>
<para>
suffices. If necessary, now gain root user rights using the command
</para>
<informalexample><simplelist><member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>su</userinput>
</member></simplelist></informalexample>
<para>
and entering the root password. Then install the application:
</para>
<informalexample><simplelist><member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>make install</userinput>
</member></simplelist></informalexample>
<para>
-That's all. If you installed &kdevelop; in the default &kde; directory you may now run the IDE. Otherwise some additional steps will be necessary as shown in the <link linkend="compile-and-install-options-dir">Non-default installation directory</link> section below.
+That's all. If you installed &tdevelop; in the default &kde; directory you may now run the IDE. Otherwise some additional steps will be necessary as shown in the <link linkend="compile-and-install-options-dir">Non-default installation directory</link> section below.
</para>
<note>
<para>
- In fact there usually will have been three &kdevelop;-based applications installed:
+ In fact there usually will have been three &tdevelop;-based applications installed:
</para>
<itemizedlist>
- <listitem><para>The &kdevelop; IDE &mdash; this is the place where you will usually work.</para></listitem>
- <listitem><para>The stand-alone &kdevelop; Assistant documentation browser &mdash; isolates all the powerful documentation facilities of the &kdevelop; IDE in a separate tool. This comes in handy when you want to look up some programming documentation but do not want to start the full IDE.</para></listitem>
- <listitem><para>The &kdevelop; Designer &mdash; enhances the &Qt; User Interface Designer by &kde; specific elements and integrates nicely in the &kdevelop; IDE.</para></listitem>
+ <listitem><para>The &tdevelop; IDE &mdash; this is the place where you will usually work.</para></listitem>
+ <listitem><para>The stand-alone &tdevelop; Assistant documentation browser &mdash; isolates all the powerful documentation facilities of the &tdevelop; IDE in a separate tool. This comes in handy when you want to look up some programming documentation but do not want to start the full IDE.</para></listitem>
+ <listitem><para>The &tdevelop; Designer &mdash; enhances the &Qt; User Interface Designer by &kde; specific elements and integrates nicely in the &tdevelop; IDE.</para></listitem>
</itemizedlist>
</note>
</listitem>
@@ -600,7 +600,7 @@ That's all. If you installed &kdevelop; in the default &kde; directory you may n
<title>Non-default Installation Directory</title>
<indexterm zone="compile-and-install-options-dir">
- <primary>&kdevelop;</primary>
+ <primary>&tdevelop;</primary>
<secondary>installation</secondary>
<tertiary>non-default directory</tertiary></indexterm>
<indexterm zone="compile-and-install-options-dir">
@@ -611,17 +611,17 @@ That's all. If you installed &kdevelop; in the default &kde; directory you may n
<primary>kbuildsycoca</primary></indexterm>
<para>
-By default <command>configure</command> prepares the IDE to be installed in the default &kde; directory. This is necessary because &kdevelop; assumes direct access to some tools and parts which reside there. If want to use your own installation directory, you must tell <command>configure</command> this by the <option>--prefix</option> option:
+By default <command>configure</command> prepares the IDE to be installed in the default &kde; directory. This is necessary because &tdevelop; assumes direct access to some tools and parts which reside there. If want to use your own installation directory, you must tell <command>configure</command> this by the <option>--prefix</option> option:
</para>
<informalexample><simplelist><member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>./configure --prefix=</userinput>(where-your-trinity-is)
</member></simplelist></informalexample>
<para>
-There is a caveat if you do so. You must provide a means for &kdevelop; to access the needed tools and parts in the &kde; directory when running. (You can still use the IDE without doing so, but with very restrained capabilities.)
+There is a caveat if you do so. You must provide a means for &tdevelop; to access the needed tools and parts in the &kde; directory when running. (You can still use the IDE without doing so, but with very restrained capabilities.)
</para>
<para>
-Call up a shell and have the following commands executed before you start &kdevelop; at the shell prompt.
+Call up a shell and have the following commands executed before you start &tdevelop; at the shell prompt.
</para>
<note><para>
@@ -638,11 +638,11 @@ Call up a shell and have the following commands executed before you start &kdeve
<userinput>kbuildsycoca</userinput>
</member>
<member>
- (Now start &kdevelop;:)
+ (Now start &tdevelop;:)
</member>
<member>
<prompt>~&gt; </prompt>
- <userinput>kdevelop</userinput>
+ <userinput>tdevelop</userinput>
</member>
</simplelist></informalexample>
@@ -661,7 +661,7 @@ In a tcsh shell you must set the environment variables using:
<userinput>setenv KDEDIRS /usr/local/kde:/opt/trinity</userinput>
</member></simplelist></informalexample>
<para>
-The <command>kbuildsycoca</command> command (<quote>build system control cache</quote>) looks around for libraries and caches their location and version, so that &kdevelop; can find them. The caveat is that it takes noticeable time&mdash;and it has to be run any time you call up the shell to start &kdevelop; from a non-default directory. You may want to put the above commands into a shell script to reduce the typing effort.
+The <command>kbuildsycoca</command> command (<quote>build system control cache</quote>) looks around for libraries and caches their location and version, so that &tdevelop; can find them. The caveat is that it takes noticeable time&mdash;and it has to be run any time you call up the shell to start &tdevelop; from a non-default directory. You may want to put the above commands into a shell script to reduce the typing effort.
</para>
<para>
(You could as well put the lines in your <filename>.bashrc</filename> or <filename>.cshrc</filename> file, but this is not advisable as <command>kbuildsycoca</command> will then be run any time you call up the shell.)
@@ -679,56 +679,56 @@ The <command>kbuildsycoca</command> command does not run from within the root. Y
</sect1> <!-- compile-and-install -->
<sect1 id="make-api">
-<title>How to Obtain a &kdevelop; API Documentation</title>
+<title>How to Obtain a &tdevelop; API Documentation</title>
<indexterm zone="make-api">
<primary>API</primary>
- <secondary>&kdevelop;</secondary></indexterm>
+ <secondary>&tdevelop;</secondary></indexterm>
<indexterm zone="make-api">
- <primary>&kdevelop;</primary>
+ <primary>&tdevelop;</primary>
<secondary>API</secondary></indexterm>
<indexterm zone="make-api">
<primary>compiling</primary>
- <secondary>&kdevelop;</secondary>
+ <secondary>&tdevelop;</secondary>
<tertiary>API</tertiary></indexterm>
<indexterm zone="make-api">
<primary>configure</primary>
- <secondary>&kdevelop; API</secondary></indexterm>
+ <secondary>&tdevelop; API</secondary></indexterm>
<para>
API is the short form of <quote>Application Program Interface</quote>. Actually such an API cotains a series of descriptions (&ie; calling conventions) by which an application program can access the operating system and other services. In our context, however, a broader definition was adopted. The API of a &kde; or &Qt; application is an abstract of the classes and methods interfaces, a synopsis to be used like a dictionary to navigate the sources.
</para>
<para>
-There is a version of the most current API available at the <ulink url="http://www.kdevelop.org/HEAD/doc/api/html/index.html">KDevelop-Home website</ulink>. It will be automatically updated every 24 hours so you can keep up.
+There is a version of the most current API available at the <ulink url="http://www.tdevelop.org/HEAD/doc/api/html/index.html">KDevelop-Home website</ulink>. It will be automatically updated every 24 hours so you can keep up.
</para>
<para>
-Alas, this version is best used read-only over the internet. If you do not always have internet access you may as well build your own API documentation from the &kdevelop; sources. To do so, you must tell the automake system where to find the KDELIBS API in your system. This is accomplished by the special option <option>--with-kdelibsdoxy-dir</option> in the <command>configure</command> command when you prepare to compile the &kdevelop; sources:
+Alas, this version is best used read-only over the internet. If you do not always have internet access you may as well build your own API documentation from the &tdevelop; sources. To do so, you must tell the automake system where to find the KDELIBS API in your system. This is accomplished by the special option <option>--with-tdelibsdoxy-dir</option> in the <command>configure</command> command when you prepare to compile the &tdevelop; sources:
</para>
<informalexample><simplelist>
<member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>./configure --</userinput>(options-as-usual)<userinput> \</userinput>
</member>
<member>
- <userinput>--with-kdelibsdoxy-dir=$KDEDIR/share/doc/HTML/en/kdelibs-apidocs</userinput>
+ <userinput>--with-tdelibsdoxy-dir=$KDEDIR/share/doc/HTML/en/tdelibs-apidocs</userinput>
</member>
</simplelist></informalexample>
<para>
-(<command>make</command> will replace the global <varname>$KDEDIR</varname> variable with the actual &kde; directory setting recorded therein.) Then issue a <command>make</command> command <link linkend="compile-and-install-make-basic">as usual</link>. After the &kdevelop; IDE has been built you have the option to build the API as well. For this you must issue
+(<command>make</command> will replace the global <varname>$KDEDIR</varname> variable with the actual &kde; directory setting recorded therein.) Then issue a <command>make</command> command <link linkend="compile-and-install-make-basic">as usual</link>. After the &tdevelop; IDE has been built you have the option to build the API as well. For this you must issue
</para>
<informalexample><simplelist><member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>make apidocs</userinput>
</member></simplelist></informalexample>
<para>
-This will build a <filename>Doxyfile</filename> in your &kdevelop; base directory which in turn will be processed by the <application>Doxygen</application> application to build quite a lot of <filename>.html</filename> API files. When this rather lengthy API building process (may last more than an hour on a slow system) finally comes to an end, you must install the API just like you have to install the &kdevelop; IDE itself. If necessary obtain superuser rights by
+This will build a <filename>Doxyfile</filename> in your &tdevelop; base directory which in turn will be processed by the <application>Doxygen</application> application to build quite a lot of <filename>.html</filename> API files. When this rather lengthy API building process (may last more than an hour on a slow system) finally comes to an end, you must install the API just like you have to install the &tdevelop; IDE itself. If necessary obtain superuser rights by
</para>
<informalexample><simplelist><member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>su</userinput>
</member></simplelist></informalexample>
@@ -737,18 +737,18 @@ and entering the root password. Then install the API files:
</para>
<informalexample><simplelist><member>
- <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+ <prompt>~/trinitysrc/tdevelop&gt; </prompt>
<userinput>make install-apidox</userinput>
</member></simplelist></informalexample>
<para>
-Once this is done, <command>make</command> will inform you about the directory where you can finally look at the API documentation's contents. Note this address, you can use it from &konqueror; as well as from inside &kdevelop;, in case you have set up the &kdevelop; sources themselves as a project to work on.
+Once this is done, <command>make</command> will inform you about the directory where you can finally look at the API documentation's contents. Note this address, you can use it from &konqueror; as well as from inside &tdevelop;, in case you have set up the &tdevelop; sources themselves as a project to work on.
</para>
<note><para>
-You will most probably see a lot of warning and/or error messages during the API build run by <application>Doxygen</application>. It is best to ignore them, they are of interest to the &kdevelop; developers only. If the API generation ever comes to a successful end, the <filename>.html</filename> API files will be usable.
+You will most probably see a lot of warning and/or error messages during the API build run by <application>Doxygen</application>. It is best to ignore them, they are of interest to the &tdevelop; developers only. If the API generation ever comes to a successful end, the <filename>.html</filename> API files will be usable.
</para></note>
</sect1> <!-- make-api -->
-</appendix> <!-- kdevelop-install -->
+</appendix> <!-- tdevelop-install -->