diff options
Diffstat (limited to 'tde-i18n-en_GB/docs/tdebase/tdeprint')
15 files changed, 1186 insertions, 4433 deletions
diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/add-printer-wiz.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/add-printer-wiz.docbook index 1ece07bc322..ff7d67d277b 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/add-printer-wiz.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/add-printer-wiz.docbook @@ -1,341 +1,200 @@ <chapter id="add-printer-wizard-2"> -<title ->The <quote ->Add Printer Wizard</quote -> for &CUPS;</title> - -<para ->Clicking on the leftmost icon on the toolbar <inlinemediaobject -><imageobject -> <imagedata fileref="cr32-action-wizard.png" format="PNG"/></imageobject -> </inlinemediaobject -> in the upper part of the window starts the <quote ->Add Printer Wizard</quote ->.</para> - -<para ->This wizard steps you through various screens to install a new printer. At present this Wizard works for &CUPS; and the <acronym ->RLPR</acronym -> environment module. The number of steps depend on the actual print-subsystem which is active and available to you on your box.</para> +<title>The <quote>Add Printer Wizard</quote> for &CUPS;</title> + +<para>Clicking on the leftmost icon on the toolbar <inlinemediaobject><imageobject> <imagedata fileref="cr32-action-wizard.png" format="PNG"/></imageobject> </inlinemediaobject> in the upper part of the window starts the <quote>Add Printer Wizard</quote>.</para> + +<para>This wizard steps you through various screens to install a new printer. At present this Wizard works for &CUPS; and the <acronym>RLPR</acronym> environment module. The number of steps depend on the actual print-subsystem which is active and available to you on your box.</para> <sect1> -<title ->Starting</title> +<title>Starting</title> -<para ->The welcome screen informs you that you can go back any time to change a setting. </para> +<para>The welcome screen informs you that you can go back any time to change a setting. </para> <screenshot> -<screeninfo ->The &tdeprint; wizard introduction screen</screeninfo> +<screeninfo>The &tdeprint; wizard introduction screen</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsaddprinterwizard1.png" format="PNG"/></imageobject> <textobject> -<phrase ->The introduction screen of the printer wizard</phrase -></textobject> +<phrase>The introduction screen of the printer wizard</phrase></textobject> </mediaobject> </screenshot> </sect1> <sect1 id="backend-selection"> -<title ->Backend Selection</title> +<title>Backend Selection</title> -<para ->Choose the <quote ->backend</quote -> protocol that &CUPS; is supposed to use with your new printer. There are:</para> +<para>Choose the <quote>backend</quote> protocol that &CUPS; is supposed to use with your new printer. There are:</para> <itemizedlist> <listitem> -<para ->local printer (serial, parallel, <acronym ->USB</acronym ->)</para> +<para>local printer (serial, parallel, <acronym>USB</acronym>)</para> </listitem> <listitem> -<para ->remote <acronym ->LPD</acronym -> queue</para> +<para>remote <acronym>LPD</acronym> queue</para> </listitem> <listitem> -<para -><acronym ->SMB</acronym -> shared printer (&Windows;)</para> +<para><acronym>SMB</acronym> shared printer (&Windows;)</para> </listitem> <listitem> -<para ->Network Printer (<acronym ->TCP</acronym ->, &HP; JetDirect, AppSocket)</para> +<para>Network Printer (<acronym>TCP</acronym>, &HP; JetDirect, AppSocket)</para> </listitem> <listitem> -<para ->Network printer with &IPP; (&IPP;/<acronym ->HTTP</acronym ->)</para> +<para>Network printer with &IPP; (&IPP;/<acronym>HTTP</acronym>)</para> </listitem> <listitem> -<para ->File printer</para> +<para>File printer</para> </listitem> <listitem> -<para ->serial fax /modem printer</para> +<para>serial fax /modem printer</para> </listitem> <listitem> -<para ->Class of Printers</para> +<para>Class of Printers</para> </listitem> </itemizedlist> -<para ->If some choices are greyed out, they are not available. For example, you may have no FAX backend software or no modem installed to use it.</para> +<para>If some choices are greyed out, they are not available. For example, you may have no FAX backend software or no modem installed to use it.</para> <screenshot> -<screeninfo ->Choosing your Printer system</screeninfo> +<screeninfo>Choosing your Printer system</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsaddprinterwizard2_backendselection.png" format="PNG"/></imageobject> <textobject> -<phrase ->Choosing your Printer System</phrase -></textobject> +<phrase>Choosing your Printer System</phrase></textobject> </mediaobject> </screenshot> </sect1> <sect1 id="direct-network-settings"> -<title ->Direct Network Setting</title> +<title>Direct Network Setting</title> -<para ->The contents of your next screen is dependent on your choice in the previous screen. If you know the details, just type them in to configure your network settings directly.</para> +<para>The contents of your next screen is dependent on your choice in the previous screen. If you know the details, just type them in to configure your network settings directly.</para> -<para ->In other cases the wizard can scan the network for you, to help you decide which setting could be useful. </para> +<para>In other cases the wizard can scan the network for you, to help you decide which setting could be useful. </para> <screenshot> -<screeninfo ->&tdeprint; wizard network scan</screeninfo> +<screeninfo>&tdeprint; wizard network scan</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsaddprinterwizard3_networkscan.png" format="PNG"/></imageobject> <textobject> -<phrase ->In the &tdeprint; wizard, you can enter network details directly, or you can scan the network automatically.</phrase -></textobject> +<phrase>In the &tdeprint; wizard, you can enter network details directly, or you can scan the network automatically.</phrase></textobject> </mediaobject> </screenshot> </sect1> <sect1 id="information-retrieval-by-network-scanning"> -<title ->Information Retrieval by Scanning the Network</title> - -<para ->If you use one of the network connections (remote <acronym ->LPD</acronym ->, <acronym ->SMB</acronym ->, remote &CUPS;, network printer with &IPP;), you have an option for scanning the network. Be careful when applying this; in some environments network scanning is considered to be hostile and harmful!</para> - -<para ->In the case of <acronym ->SMB</acronym ->, &tdeprint; will use the Samba utilities <command ->nmblookup</command -> and <command ->smbclient</command -> (which need to be installed for this to work) to retrieve the information it presents in a tree structure.</para> - -<para ->In the case of &IPP; (Port 631) and <acronym ->TCP</acronym -> Network/AppSocket (Port 9100) &tdeprint; will try to open the port and, if successful, send an <command ->ipp-get-printer-attribute</command -> request to the printer. For newer &HP; printers the latter usually works, because they support both AppSocket and &IPP;.</para> - -<para ->Some printers or manufacturers use other port numbers for direct TCP/IP printing. You may need to look up which one to use. The <guilabel ->Settings</guilabel -> button in the dialogue lets you configure your scan, including <acronym ->IP</acronym -> addresses, ports and timeout to use.</para> - -<para ->Once again: be careful not to be mistaken for an intruder on your network, if you use the scanning technique.</para> +<title>Information Retrieval by Scanning the Network</title> + +<para>If you use one of the network connections (remote <acronym>LPD</acronym>, <acronym>SMB</acronym>, remote &CUPS;, network printer with &IPP;), you have an option for scanning the network. Be careful when applying this; in some environments network scanning is considered to be hostile and harmful!</para> + +<para>In the case of <acronym>SMB</acronym>, &tdeprint; will use the Samba utilities <command>nmblookup</command> and <command>smbclient</command> (which need to be installed for this to work) to retrieve the information it presents in a tree structure.</para> + +<para>In the case of &IPP; (Port 631) and <acronym>TCP</acronym> Network/AppSocket (Port 9100) &tdeprint; will try to open the port and, if successful, send an <command>ipp-get-printer-attribute</command> request to the printer. For newer &HP; printers the latter usually works, because they support both AppSocket and &IPP;.</para> + +<para>Some printers or manufacturers use other port numbers for direct TCP/IP printing. You may need to look up which one to use. The <guilabel>Settings</guilabel> button in the dialogue lets you configure your scan, including <acronym>IP</acronym> addresses, ports and timeout to use.</para> + +<para>Once again: be careful not to be mistaken for an intruder on your network, if you use the scanning technique.</para> <screenshot> -<screeninfo ->&tdeprint; wizard network configuration dialogue</screeninfo> +<screeninfo>&tdeprint; wizard network configuration dialogue</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsaddprinterwizard4_networkscan_config.png" format="PNG"/></imageobject> <textobject> -<phrase ->In the &tdeprint; wizard, you can enter parameters to have the wizard scan parts of your network.</phrase -></textobject> +<phrase>In the &tdeprint; wizard, you can enter parameters to have the wizard scan parts of your network.</phrase></textobject> </mediaobject> </screenshot> </sect1> <sect1 id="printer-model-selection"> -<title ->Printer Model Selection</title> +<title>Printer Model Selection</title> -<para ->The hardest part is probably the <quote ->Printer Model Selection</quote ->. In former years the situation was difficult, because there were hardly any drivers to find. The difficulty now is there are too many; though some of them are very good, many are quite broken. </para> +<para>The hardest part is probably the <quote>Printer Model Selection</quote>. In former years the situation was difficult, because there were hardly any drivers to find. The difficulty now is there are too many; though some of them are very good, many are quite broken. </para> -<para ->If you have a current <quote ->database</quote -> of available drivers on your system, select the manufacturer in the left part of the window first, then the device model in the right part. This split window shows all &PPD;s found by &CUPS; in its standard repository of installable &PPD;s. This repository normally is <filename class="directory" ->/usr/share/cups/model/</filename ->. If you want your driver to be found automatically by &CUPS; and &tdeprint;, place it in there.</para> +<para>If you have a current <quote>database</quote> of available drivers on your system, select the manufacturer in the left part of the window first, then the device model in the right part. This split window shows all &PPD;s found by &CUPS; in its standard repository of installable &PPD;s. This repository normally is <filename class="directory">/usr/share/cups/model/</filename>. If you want your driver to be found automatically by &CUPS; and &tdeprint;, place it in there.</para> <!-- Insert Screenshot here: --> </sect1> <sect1 id="driver-selection"> -<title ->Driver Selection</title> +<title>Driver Selection</title> -<para ->On the next screen you will see a description of the driver selected previously. This description is extracted from the actual &PPD; used.</para> +<para>On the next screen you will see a description of the driver selected previously. This description is extracted from the actual &PPD; used.</para> <warning> -<para ->For a real &PostScript; printer <emphasis ->never</emphasis -> try to install a <quote ->Foomatic</quote -> or <quote ->Gimp-Print</quote -> &PPD;, even if it is offered. You won't be happy with it. Instead find the original &PPD; from the manufacturer, preferably the one written for &Windows; NT and use it. </para> +<para>For a real &PostScript; printer <emphasis>never</emphasis> try to install a <quote>Foomatic</quote> or <quote>Gimp-Print</quote> &PPD;, even if it is offered. You won't be happy with it. Instead find the original &PPD; from the manufacturer, preferably the one written for &Windows; NT and use it. </para> </warning> -<para ->Some &Linux; distributions have supplied for &CUPS; every possible combination of <application ->Ghostscript</application -> filters and <quote ->foomatic</quote -> &PPD; files they could find on the net. Many of these are quite useless; they were generated a year ago, when the people at <ulink url="http://www.linuxprinting.org" ->www.linuxprinting.org</ulink -> began their first experiments with supplying third party &PPD;s for &CUPS;. Although dubbed <quote ->Alpha</quote -> at the time, these started to take on a life of their own and can now be found at various places on the net, doing &CUPS; no favours.</para> +<para>Some &Linux; distributions have supplied for &CUPS; every possible combination of <application>Ghostscript</application> filters and <quote>foomatic</quote> &PPD; files they could find on the net. Many of these are quite useless; they were generated a year ago, when the people at <ulink url="http://www.linuxprinting.org">www.linuxprinting.org</ulink> began their first experiments with supplying third party &PPD;s for &CUPS;. Although dubbed <quote>Alpha</quote> at the time, these started to take on a life of their own and can now be found at various places on the net, doing &CUPS; no favours.</para> -<para ->If you are not sure which ones to use go to:</para> +<para>If you are not sure which ones to use go to:</para> <itemizedlist> <listitem> -<para -><ulink -url="http://www.linuxprinting.org" ->http://www.linuxprinting.org</ulink> +<para><ulink +url="http://www.linuxprinting.org">http://www.linuxprinting.org</ulink> </para> </listitem> <listitem> <para> -<ulink url="http://www.cups.org" ->http://www.cups.org</ulink> +<ulink url="http://www.cups.org">http://www.cups.org</ulink> </para> </listitem> </itemizedlist> -<para ->And ask for help. At a later stage, a document detailing the differences between the different driver and &PPD; models will appear at <ulink url="http://tdeprint.sourceforge.net" ->http://tdeprint.sourceforge.net/</ulink -> Watch out for this!</para> +<para>And ask for help. At a later stage, a document detailing the differences between the different driver and &PPD; models will appear at <ulink url="http://tdeprint.sourceforge.net">http://tdeprint.sourceforge.net/</ulink> Watch out for this!</para> -<para ->Via the <guibutton ->Other...</guibutton -> button you are able to retrieve any &PPD; located somewhere on your available file system.</para> +<para>Via the <guibutton>Other...</guibutton> button you are able to retrieve any &PPD; located somewhere on your available file system.</para> <!-- Insert Screenshot here: --> </sect1> <sect1 id="printer-test-and-finding-settings"> -<title ->Printer Test and Finding the Right Settings</title> +<title>Printer Test and Finding the Right Settings</title> -<para ->Specify your first driver settings now. The most important one is the default paper size. In many cases this is set to <quote ->Letter</quote ->. If you live in an <quote ->A4</quote -> country and don't want your first test page to jam: now is the time to prevent this. </para> +<para>Specify your first driver settings now. The most important one is the default paper size. In many cases this is set to <quote>Letter</quote>. If you live in an <quote>A4</quote> country and don't want your first test page to jam: now is the time to prevent this. </para> -<para ->You are ready to start a test print. Hit the <guibutton ->Test</guibutton -> button.</para> +<para>You are ready to start a test print. Hit the <guibutton>Test</guibutton> button.</para> <!-- Insert Screenshot here: --> </sect1> <sect1 id="banner-selection"> -<title ->Banner Selection</title> +<title>Banner Selection</title> -<para ->The last but one screen lets you select whether you want banners, and which ones you want to use, to mark the beginning and/or end of every printjob on that printer. You can also select and deselect banners before printing in the job options dialogues.</para> +<para>The last but one screen lets you select whether you want banners, and which ones you want to use, to mark the beginning and/or end of every printjob on that printer. You can also select and deselect banners before printing in the job options dialogues.</para> -<para ->If you need to use custom banners, copy them into <filename class="directory" ->/usr/share/cups/banners/</filename -> to make them available for selection. They must be &PostScript; files, however.</para> +<para>If you need to use custom banners, copy them into <filename class="directory">/usr/share/cups/banners/</filename> to make them available for selection. They must be &PostScript; files, however.</para> <!-- Insert Screenshot here: --> </sect1> <sect1 id="baptizing-your-printer"> -<title ->Finally: Baptising Your New Printer</title> - -<para ->The last screen lets you insert a name for your new printer.</para> - -<para ->The name must start with a letter and may contain numbers and underscores with a maximum size of 128 characters. Conform to this if you want to avoid erratic behaviour of your &CUPS; daemon. The printer names in &CUPS; are <emphasis ->not</emphasis -> case sensitive! This is a requirement of &IPP;. So the names <systemitem class="resource" ->DANKA_infotec</systemitem ->, <systemitem class="resource" ->Danka_Infotec</systemitem -> and <systemitem class="resource" ->danka_infotec</systemitem -> all represent the same printer.</para> +<title>Finally: Baptising Your New Printer</title> + +<para>The last screen lets you insert a name for your new printer.</para> + +<para>The name must start with a letter and may contain numbers and underscores with a maximum size of 128 characters. Conform to this if you want to avoid erratic behaviour of your &CUPS; daemon. The printer names in &CUPS; are <emphasis>not</emphasis> case sensitive! This is a requirement of &IPP;. So the names <systemitem class="resource">DANKA_infotec</systemitem>, <systemitem class="resource">Danka_Infotec</systemitem> and <systemitem class="resource">danka_infotec</systemitem> all represent the same printer.</para> <!-- Insert Screenshot here: --> </sect1> <sect1 id="final-confirmation-screen"> -<title ->The Final Confirmation Screen</title> +<title>The Final Confirmation Screen</title> -<para -> +<para> <!-- Insert Screenshot here: --> </para> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/cups-config.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/cups-config.docbook index 49e387f3a2f..bc3580e81bd 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/cups-config.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/cups-config.docbook @@ -1,309 +1,184 @@ <chapter id="cups-configuration"> -<title ->Print Server Configuration: CUPS</title> - -<para ->Start the print server configuration (now that you have chosen &CUPS;, this is equivalent to the configuration of the &CUPS; daemon) by clicking on the appropriate button. You can find it by moving the mouse slowly over the buttons and reading the tooltips. It should be the 11th from the left , or third from the right; its icon is a <guiicon ->wrench</guiicon ->.</para> - -<para ->The &CUPS; Server Configuration window pops up. It gives you a structured view of all the settings that apply to the &CUPS; daemon. The configuration file for that daemon is normally located in <filename ->/etc/cups/cupsd.conf</filename ->. This is a plain <acronym ->ASCII</acronym -> file with a syntax similar to the configuration file of the <application ->Apache</application -> web server. It is a good idea to create a backup copy, just in case something goes wrong with the configuration through &tdeprint;/&CUPS; Server Configuration dialogues:</para> - -<screen -><userinput -><command ->cp</command -> <filename ->/etc/cups/cupsd.conf</filename -> <filename ->/etc/cups/cupsd.conf.bak</filename -></userinput -></screen> - -<para ->As this graphical user interface to edit the configuration file is such a new feature, you should have the second chance of resorting to the original file. So back it up, please.</para> +<title>Print Server Configuration: CUPS</title> + +<para>Start the print server configuration (now that you have chosen &CUPS;, this is equivalent to the configuration of the &CUPS; daemon) by clicking on the appropriate button. You can find it by moving the mouse slowly over the buttons and reading the tooltips. It should be the 11th from the left , or third from the right; its icon is a <guiicon>wrench</guiicon>.</para> + +<para>The &CUPS; Server Configuration window pops up. It gives you a structured view of all the settings that apply to the &CUPS; daemon. The configuration file for that daemon is normally located in <filename>/etc/cups/cupsd.conf</filename>. This is a plain <acronym>ASCII</acronym> file with a syntax similar to the configuration file of the <application>Apache</application> web server. It is a good idea to create a backup copy, just in case something goes wrong with the configuration through &tdeprint;/&CUPS; Server Configuration dialogues:</para> + +<screen><userinput><command>cp</command> <filename>/etc/cups/cupsd.conf</filename> <filename>/etc/cups/cupsd.conf.bak</filename></userinput></screen> + +<para>As this graphical user interface to edit the configuration file is such a new feature, you should have the second chance of resorting to the original file. So back it up, please.</para> <sect1 id="quick-help"> -<title ->Quick Help</title> - -<para ->One very nice feature is the <quote ->Quick Help</quote -> available. If you click on the little question mark (<guiicon ->What's this?</guiicon ->) on your window title bar, you'll see the cursor changing its form. Now click on a <command ->cupsd</command -> configuration setting field to find out what it means and what your options are. In most cases you should understand the meaning immediately, otherwise turn to the excellent &CUPS; documentation. (If your &CUPS; Daemon is running, you have it online on your own host at <ulink url="http://localhost:631/documentation.html" ->http://localhost:631/documentation.html</ulink ->.</para> -<para ->If &CUPS; is not running, but installed on your system you could find it in your own host's file system. The exact location depends on your &OS;, but on &Linux; the default is <filename class="directory" ->/usr/share/doc/cups/</filename -> or <filename class="directory" -> /usr/share/doc/cups/documentation.html</filename ->.</para> +<title>Quick Help</title> + +<para>One very nice feature is the <quote>Quick Help</quote> available. If you click on the little question mark (<guiicon>What's this?</guiicon>) on your window title bar, you'll see the cursor changing its form. Now click on a <command>cupsd</command> configuration setting field to find out what it means and what your options are. In most cases you should understand the meaning immediately, otherwise turn to the excellent &CUPS; documentation. (If your &CUPS; Daemon is running, you have it online on your own host at <ulink url="http://localhost:631/documentation.html">http://localhost:631/documentation.html</ulink>.</para> +<para>If &CUPS; is not running, but installed on your system you could find it in your own host's file system. The exact location depends on your &OS;, but on &Linux; the default is <filename class="directory">/usr/share/doc/cups/</filename> or <filename class="directory"> /usr/share/doc/cups/documentation.html</filename>.</para> </sect1> <sect1 id="longer-help"> -<title ->Longer Help</title> +<title>Longer Help</title> -<para ->For the best, most detailed and most recent information you should always refer to the original &CUPS; documentation. &CUPS; is, much like &kde; in a rapid development process. There are constantly new features being added. New features might for times be only configurable by directly editing the configuration files. The &tdeprint; &GUI; might not have caught up with &CUPS; development.</para> +<para>For the best, most detailed and most recent information you should always refer to the original &CUPS; documentation. &CUPS; is, much like &kde; in a rapid development process. There are constantly new features being added. New features might for times be only configurable by directly editing the configuration files. The &tdeprint; &GUI; might not have caught up with &CUPS; development.</para> -<para ->Just in case you want to look at the original configuration files of your &CUPS; system -- they are here:</para> +<para>Just in case you want to look at the original configuration files of your &CUPS; system -- they are here:</para> <note> -<para ->These paths are based on the default installation. Your &OS; may have installed them to a different prefix, for example, <filename class="directory" ->/usr/local/</filename ->, but the hierarchy should still match that shown below.</para> +<para>These paths are based on the default installation. Your &OS; may have installed them to a different prefix, for example, <filename class="directory">/usr/local/</filename>, but the hierarchy should still match that shown below.</para> </note> <variablelist> <varlistentry> -<term -><filename class="directory" ->/etc/cups/</filename -></term> +<term><filename class="directory">/etc/cups/</filename></term> <listitem> -<para ->The folder with the configuration files</para> +<para>The folder with the configuration files</para> </listitem> </varlistentry> <varlistentry> -<term -><filename ->/etc/cups/cupsd.conf</filename -></term> +<term><filename>/etc/cups/cupsd.conf</filename></term> <listitem> -<para ->The configuration file for the &CUPS; daemon</para> +<para>The configuration file for the &CUPS; daemon</para> </listitem> </varlistentry> <varlistentry> -<term -><filename ->/etc/cups/printers.conf</filename -></term> +<term><filename>/etc/cups/printers.conf</filename></term> <listitem> -<para ->The configuration file that contains the information about your locally installed printers.</para> +<para>The configuration file that contains the information about your locally installed printers.</para> </listitem> </varlistentry> <varlistentry> -<term -><filename class="directory" ->/etc/cups/ppd/</filename -></term> +<term><filename class="directory">/etc/cups/ppd/</filename></term> <listitem> -<para ->The folder with &PPD; files of your installed printers.</para> +<para>The folder with &PPD; files of your installed printers.</para> </listitem> </varlistentry> </variablelist> -<para ->The following links only work if your &CUPS; daemon is up and running. To access all the original &CUPS; documentation, go to:</para> +<para>The following links only work if your &CUPS; daemon is up and running. To access all the original &CUPS; documentation, go to:</para> <variablelist> <varlistentry> -<term -><ulink url="http://localhost:631/documentation.html" ->http://localhost:631/documentation.html</ulink -></term> +<term><ulink url="http://localhost:631/documentation.html">http://localhost:631/documentation.html</ulink></term> <listitem> -<para ->A page with all the links to the other documents.</para> +<para>A page with all the links to the other documents.</para> </listitem> </varlistentry> <varlistentry> -<term -><ulink url="http://localhost:631/sam.html" ->http://localhost:631/sam.html</ulink -></term> +<term><ulink url="http://localhost:631/sam.html">http://localhost:631/sam.html</ulink></term> <listitem> -<para ->Direct access to the &CUPS; Software Administrator Manual in <acronym ->HTML</acronym -> format.</para> +<para>Direct access to the &CUPS; Software Administrator Manual in <acronym>HTML</acronym> format.</para> </listitem> </varlistentry> <varlistentry> -<term -><ulink url="http://localhost:631/sam.pdf" ->http://localhost:631/sam.pdf</ulink -></term> +<term><ulink url="http://localhost:631/sam.pdf">http://localhost:631/sam.pdf</ulink></term> <listitem> -<para ->Direct access to the &CUPS; Software Administrator Manual in <acronym ->PDF</acronym -> format.</para> +<para>Direct access to the &CUPS; Software Administrator Manual in <acronym>PDF</acronym> format.</para> </listitem> </varlistentry> <varlistentry> -<term -><ulink url="http://www.cups.org/documentation.html" ->http://www.cups.org/documentation.html</ulink -></term> +<term><ulink url="http://www.cups.org/documentation.html">http://www.cups.org/documentation.html</ulink></term> <listitem> -<para ->The latest on line documentation from the &CUPS; web site.</para> +<para>The latest on line documentation from the &CUPS; web site.</para> </listitem> </varlistentry> </variablelist> -<para ->The following links give you access to the same files (probably icons and graphics will be missing) even if your CUPS daemon is not up and running. You need, however, CUPS installed on your system. (Some distributions might place the files somewhere else -- you're on your own then to find out where...) To access all the original CUPS documentation, go to:</para> +<para>The following links give you access to the same files (probably icons and graphics will be missing) even if your CUPS daemon is not up and running. You need, however, CUPS installed on your system. (Some distributions might place the files somewhere else -- you're on your own then to find out where...) To access all the original CUPS documentation, go to:</para> -<para ->This documentation is available even when the &CUPS; daemon is not installed, although you may find images and icons are missing when you view the <acronym ->HTML</acronym -> files.</para> +<para>This documentation is available even when the &CUPS; daemon is not installed, although you may find images and icons are missing when you view the <acronym>HTML</acronym> files.</para> -<para ->As noted above, the hierarchy below should be intact, but your &OS; may have installed &CUPS; to a different location.</para> +<para>As noted above, the hierarchy below should be intact, but your &OS; may have installed &CUPS; to a different location.</para> <variablelist> <varlistentry> -<term -><filename ->/usr/share/doc/cups/documentation.html</filename -></term> +<term><filename>/usr/share/doc/cups/documentation.html</filename></term> <listitem> -<para ->A page with all the links to the other documents.</para> +<para>A page with all the links to the other documents.</para> </listitem> </varlistentry> <varlistentry> -<term -><filename ->/usr/share/doc/cups/sam.html</filename -></term> +<term><filename>/usr/share/doc/cups/sam.html</filename></term> <listitem> -<para ->Direct access to the &CUPS; Software Administrator Manual in <acronym ->HTML</acronym -> format.</para> +<para>Direct access to the &CUPS; Software Administrator Manual in <acronym>HTML</acronym> format.</para> </listitem> </varlistentry> <varlistentry> -<term -><filename ->/usr/share/doc/cups/sam.pdf</filename -></term> +<term><filename>/usr/share/doc/cups/sam.pdf</filename></term> <listitem> -<para ->Direct access to the &CUPS; Software Administrator Manual in <acronym ->PDF</acronym -> format.</para> +<para>Direct access to the &CUPS; Software Administrator Manual in <acronym>PDF</acronym> format.</para> </listitem> </varlistentry> </variablelist> -<para ->There are a few WebSites and Newsgroups discussing &CUPS; (and &Linux; Printing in General) and giving help to newbies at:</para> +<para>There are a few WebSites and Newsgroups discussing &CUPS; (and &Linux; Printing in General) and giving help to newbies at:</para> <variablelist> <varlistentry> -<term -><ulink url="http://www.cups.org/newsgroups.php" ->http://www.cups.org/newsgroups.php</ulink -></term> +<term><ulink url="http://www.cups.org/newsgroups.php">http://www.cups.org/newsgroups.php</ulink></term> <listitem> -<para ->The &CUPS; website.</para> +<para>The &CUPS; website.</para> </listitem> </varlistentry> <varlistentry> -<term -><ulink url="http://www.linuxprinting.org/newsportal/" ->http://www.linuxprinting.org/newsportal/</ulink -></term> +<term><ulink url="http://www.linuxprinting.org/newsportal/">http://www.linuxprinting.org/newsportal/</ulink></term> <listitem> -<para ->LinuxPrinting.org, the home of the Linuxprinting HOWTO and the &Linux; Printer Database</para> +<para>LinuxPrinting.org, the home of the Linuxprinting HOWTO and the &Linux; Printer Database</para> </listitem> </varlistentry> </variablelist> -<para ->And finally, there will be a WebSite for &tdeprint; and related documentation, at <ulink url="http://tdeprint.sourceforge.net/" -> http://tdeprint.sourceforge.net/</ulink -></para> +<para>And finally, there will be a WebSite for &tdeprint; and related documentation, at <ulink url="http://tdeprint.sourceforge.net/"> http://tdeprint.sourceforge.net/</ulink></para> -<para ->In the next section I will step you through most of the configuration options of &tdeprint; with &CUPS;.</para> +<para>In the next section I will step you through most of the configuration options of &tdeprint; with &CUPS;.</para> </sect1> <sect1 id="explaining-different-gui-elements"> -<title ->Explaining different elements of the &GUI;</title> +<title>Explaining different elements of the &GUI;</title> <sect2> -<title ->Upper Window: View on Printers, both Real and Virtual</title> +<title>Upper Window: View on Printers, both Real and Virtual</title> -<para ->This section is not yet complete</para> +<para>This section is not yet complete</para> <itemizedlist> <listitem> -<para ->Tree view, icon view and list view</para> +<para>Tree view, icon view and list view</para> </listitem> <listitem> -<para ->The icons of the task bar</para> +<para>The icons of the task bar</para> </listitem> <listitem> -<para ->Different fonts for different printers</para> +<para>Different fonts for different printers</para> </listitem> <listitem> -<para ->Different printer icons mean different things</para> +<para>Different printer icons mean different things</para> </listitem> </itemizedlist> </sect2> <sect2> -<title ->Lower Window: Tabbed View of Details</title> +<title>Lower Window: Tabbed View of Details</title> -<para ->This section is not yet complete.</para> +<para>This section is not yet complete.</para> <itemizedlist> <listitem> -<para ->The icons of the task bar</para> +<para>The icons of the task bar</para> </listitem> <listitem> -<para ->The Tabs</para> +<para>The Tabs</para> </listitem> <listitem> -<para ->Changing printer settings</para> +<para>Changing printer settings</para> </listitem> </itemizedlist> @@ -313,498 +188,229 @@ <sect1 id="welcome-to-cups-server-configuration"> -<title ->Welcome to the &CUPS; Server Configuration</title> +<title>Welcome to the &CUPS; Server Configuration</title> -<para ->This is the Welcome Screen for your server configuration dialogues. Clicking onto one of the items of the tree view on left side of the screen opens the appropriate part of the configuration settings.</para> +<para>This is the Welcome Screen for your server configuration dialogues. Clicking onto one of the items of the tree view on left side of the screen opens the appropriate part of the configuration settings.</para> -<para ->Every setting has a default value. The defaults let &CUPS; normally work as a fully functional client. The clients listen on TCP/IP Port 631 for infos broadcast by &CUPS; servers on the <acronym ->LAN</acronym ->. This information let the clients print immediately after receiving them, without installing any driver or configuring any printer on the clients.</para> +<para>Every setting has a default value. The defaults let &CUPS; normally work as a fully functional client. The clients listen on TCP/IP Port 631 for infos broadcast by &CUPS; servers on the <acronym>LAN</acronym>. This information let the clients print immediately after receiving them, without installing any driver or configuring any printer on the clients.</para> -<para ->To configure a &CUPS; server (which is broadcasting its service to the <acronym ->LAN</acronym ->) you need to change settings from the defaults.</para> +<para>To configure a &CUPS; server (which is broadcasting its service to the <acronym>LAN</acronym>) you need to change settings from the defaults.</para> -<para ->The dialogue to configure the &CUPS; server: welcome screen. </para> +<para>The dialogue to configure the &CUPS; server: welcome screen. </para> <screenshot> -<screeninfo ->CUPS server configuration dialogue: welcome screen</screeninfo> +<screeninfo>CUPS server configuration dialogue: welcome screen</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration1_welcome.png" format="PNG"/></imageobject> <textobject> -<phrase ->The dialogue to configure the &CUPS; server: welcome screen</phrase -></textobject> -<caption -><para ->The dialogue to configure the &CUPS; server: welcome screen</para -></caption> +<phrase>The dialogue to configure the &CUPS; server: welcome screen</phrase></textobject> +<caption><para>The dialogue to configure the &CUPS; server: welcome screen</para></caption> </mediaobject> </screenshot> -<para ->To select the default setting of any item just enable the checkbox on the right side of the screen. To set an item to a different value, disable the checkbox and then go on to do the setting you want on the left side of the screen.</para> +<para>To select the default setting of any item just enable the checkbox on the right side of the screen. To set an item to a different value, disable the checkbox and then go on to do the setting you want on the left side of the screen.</para> -<para ->The complete server configuration includes:</para> +<para>The complete server configuration includes:</para> <itemizedlist> <listitem> -<para -><link linkend="server-general-configuration" -><guilabel ->Server</guilabel -> General Configuration</link -></para> +<para><link linkend="server-general-configuration"><guilabel>Server</guilabel> General Configuration</link></para> </listitem> <listitem> -<para -><link linkend="server-logging-configuration" ->Server <guilabel ->Log</guilabel ->ging Configuration</link -></para> +<para><link linkend="server-logging-configuration">Server <guilabel>Log</guilabel>ging Configuration</link></para> </listitem> <listitem> -<para -><link -linkend="server-directories-configuration" ->Server <guilabel ->Folders</guilabel -> and Path Definitions</link -></para> +<para><link +linkend="server-directories-configuration">Server <guilabel>Folders</guilabel> and Path Definitions</link></para> </listitem> <listitem> -<para -><link linkend="server-configuration" ->Server <guilabel ->HTTP</guilabel -> Configuration</link -></para> +<para><link linkend="server-configuration">Server <guilabel>HTTP</guilabel> Configuration</link></para> </listitem> <listitem> -<para -><link linkend="server-encryption-support-configuration" ->Server <guilabel ->Encryption</guilabel -> and Certificate Support Configuration</link -></para> +<para><link linkend="server-encryption-support-configuration">Server <guilabel>Encryption</guilabel> and Certificate Support Configuration</link></para> </listitem> <listitem> -<para -><link linkend="server-miscellaneous-configuration" ->Server <guilabel ->Misc</guilabel ->ellaneous Configuration</link -></para> +<para><link linkend="server-miscellaneous-configuration">Server <guilabel>Misc</guilabel>ellaneous Configuration</link></para> </listitem> <listitem> -<para -><guilabel ->Network</guilabel -> General Configuration</para> +<para><guilabel>Network</guilabel> General Configuration</para> </listitem> <listitem> -<para -><link linkend="network-clients-configuration" ->Network <guilabel ->Clients</guilabel -> Configuration</link -></para> +<para><link linkend="network-clients-configuration">Network <guilabel>Clients</guilabel> Configuration</link></para> </listitem> <listitem> -<para -><link -linkend="browsing-general-configuration" -><guilabel ->Browsing</guilabel -> General Configuration</link -></para> +<para><link +linkend="browsing-general-configuration"><guilabel>Browsing</guilabel> General Configuration</link></para> </listitem> <listitem> -<para -><link linkend="browsing-connection-configuration" ->Browsing <guilabel ->Connection</guilabel -> Configuration</link -></para> +<para><link linkend="browsing-connection-configuration">Browsing <guilabel>Connection</guilabel> Configuration</link></para> </listitem> <listitem> -<para -><link -linkend="browsing-masks-configuration" ->Browsing <guilabel ->Masks</guilabel -> Configuration</link -></para> +<para><link +linkend="browsing-masks-configuration">Browsing <guilabel>Masks</guilabel> Configuration</link></para> </listitem> <listitem> -<para -><link linkend="browsing-timeouts-configuration" ->Browsing <guilabel ->Timeouts</guilabel -> Configuration</link -></para> +<para><link linkend="browsing-timeouts-configuration">Browsing <guilabel>Timeouts</guilabel> Configuration</link></para> </listitem> <listitem> -<para -><link linkend="browsing-relay-configuration" ->Browsing <guilabel ->Relay</guilabel -> Configuration</link -></para> +<para><link linkend="browsing-relay-configuration">Browsing <guilabel>Relay</guilabel> Configuration</link></para> </listitem> <listitem> -<para -><link -linkend="security-configuration" -><guilabel ->Security</guilabel -> Configuration</link -></para> +<para><link +linkend="security-configuration"><guilabel>Security</guilabel> Configuration</link></para> </listitem> </itemizedlist> -<para ->Each of these configuration items will be described in the following sections of the manual.</para> +<para>Each of these configuration items will be described in the following sections of the manual.</para> </sect1> <sect1 id="server-general-configuration"> -<title ->Server General Configuration</title> +<title>Server General Configuration</title> -<para ->The server general configuration is done on this screen. It includes:</para> +<para>The server general configuration is done on this screen. It includes:</para> <itemizedlist> -<listitem -><para -><guilabel ->Server name</guilabel -></para -></listitem> -<listitem -><para -><guilabel ->Administrator's email</guilabel -></para -></listitem> -<listitem -><para -><guilabel ->Server user</guilabel -></para -></listitem> -<listitem -><para -><guilabel ->Server group</guilabel -></para -></listitem> -<listitem -><para -><guilabel ->Remote user name</guilabel -></para -></listitem> +<listitem><para><guilabel>Server name</guilabel></para></listitem> +<listitem><para><guilabel>Administrator's email</guilabel></para></listitem> +<listitem><para><guilabel>Server user</guilabel></para></listitem> +<listitem><para><guilabel>Server group</guilabel></para></listitem> +<listitem><para><guilabel>Remote user name</guilabel></para></listitem> </itemizedlist> -<para ->The tab window to configure the &CUPS; server general settings lets you the change the default values. Click on the little question mark and then on one of the fields to get a <quote ->Quick Help</quote -> about the meaning of the setting.</para> - -<para ->If you are unsure, leave alone and turn to the original &CUPS; documentation first. If your &CUPS; daemon is already running, it is readable from the &konqueror; by pointing it to &URL; <ulink url="http://localhost:631/documentation.html" -> http://localhost:631/documentation.html</ulink ->.</para> - -<para ->There, first <quote ->make friends</quote -> with the Software Administrator Manual. Otherwise, for example, if the &CUPS; daemon is not running, try looking in your local file system, by default at <filename class="directory" ->/usr/share/doc/cups/</filename -> or <filename ->/usr/share/doc/cups/documentation.html</filename ->.</para> +<para>The tab window to configure the &CUPS; server general settings lets you the change the default values. Click on the little question mark and then on one of the fields to get a <quote>Quick Help</quote> about the meaning of the setting.</para> + +<para>If you are unsure, leave alone and turn to the original &CUPS; documentation first. If your &CUPS; daemon is already running, it is readable from the &konqueror; by pointing it to &URL; <ulink url="http://localhost:631/documentation.html"> http://localhost:631/documentation.html</ulink>.</para> + +<para>There, first <quote>make friends</quote> with the Software Administrator Manual. Otherwise, for example, if the &CUPS; daemon is not running, try looking in your local file system, by default at <filename class="directory">/usr/share/doc/cups/</filename> or <filename>/usr/share/doc/cups/documentation.html</filename>.</para> <screenshot> -<screeninfo ->&CUPS; server general configuration dialogue: ServerName, AdminMail, ServerUser, ServerGroup, RemoteUserName</screeninfo> +<screeninfo>&CUPS; server general configuration dialogue: ServerName, AdminMail, ServerUser, ServerGroup, RemoteUserName</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration2_general.png" format="PNG"/></imageobject> <textobject> -<phrase ->The dialogue to configure the &CUPS; server general settings: ServerName, AdminMail, ServerUser, ServerGroup, RemoteUserName </phrase -></textobject> +<phrase>The dialogue to configure the &CUPS; server general settings: ServerName, AdminMail, ServerUser, ServerGroup, RemoteUserName </phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Server Name</guilabel -></term> +<term><guilabel>Server Name</guilabel></term> <listitem> -<para ->The hostname of your server, as advertised to the world. By default, &CUPS; will use the hostname of the system. To set the default server usd by clients, see the <filename ->client.conf</filename -> file.</para> +<para>The hostname of your server, as advertised to the world. By default, &CUPS; will use the hostname of the system. To set the default server usd by clients, see the <filename>client.conf</filename> file.</para> <informalexample> -<para ->For example, enter <userinput ->myhost.domain.com</userinput -></para> +<para>For example, enter <userinput>myhost.domain.com</userinput></para> </informalexample> -<para ->This is the hostname that is reported to clients. Should you ever encounter strange problems in accessing the server, put here its <acronym ->IP</acronym -> address for troubleshooting. This way you eliminate any potential name resolution problems; and you can more easily nail the real problem down.</para> +<para>This is the hostname that is reported to clients. Should you ever encounter strange problems in accessing the server, put here its <acronym>IP</acronym> address for troubleshooting. This way you eliminate any potential name resolution problems; and you can more easily nail the real problem down.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Administrator's email</guilabel -></term> +<term><guilabel>Administrator's email</guilabel></term> <listitem> -<para ->This is the email address to send all complaints or problems to. By default &CUPS; will use <quote ->root@hostname</quote ->.</para> +<para>This is the email address to send all complaints or problems to. By default &CUPS; will use <quote>root@hostname</quote>.</para> <informalexample> -<para ->For example, enter <userinput ->root@myhost.com</userinput ->.</para> +<para>For example, enter <userinput>root@myhost.com</userinput>.</para> </informalexample> <note> -<para ->Contrary to what the quickhelp suggests, it is also legal to send an email full of praise and enthusiasm about &CUPS; and &tdeprint; to the server administrator.</para> +<para>Contrary to what the quickhelp suggests, it is also legal to send an email full of praise and enthusiasm about &CUPS; and &tdeprint; to the server administrator.</para> </note> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Server User</guilabel -></term> +<term><guilabel>Server User</guilabel></term> <listitem> -<para ->The user the server runs under. Normally this must be <systemitem class="username" ->lp</systemitem ->, however you can configure things for another user if needed.</para> +<para>The user the server runs under. Normally this must be <systemitem class="username">lp</systemitem>, however you can configure things for another user if needed.</para> <note> -<para ->The server must be initially run as root to support the default <acronym ->IPP</acronym -> port of 631. It changes users whenever an external program is run.</para> +<para>The server must be initially run as root to support the default <acronym>IPP</acronym> port of 631. It changes users whenever an external program is run.</para> </note> <informalexample> -<para ->Enter for example <userinput ->lp</userinput ->.</para> +<para>Enter for example <userinput>lp</userinput>.</para> </informalexample> -<para ->This is the &UNIX; user account for filters and <acronym ->CGI</acronym -> programs to run under. <acronym ->CGI</acronym -> programs are responsible for showing you the nice web administration interface accessible via <ulink url="http://localhost:631/" ->http://localhost:631/</ulink ->).</para> +<para>This is the &UNIX; user account for filters and <acronym>CGI</acronym> programs to run under. <acronym>CGI</acronym> programs are responsible for showing you the nice web administration interface accessible via <ulink url="http://localhost:631/">http://localhost:631/</ulink>).</para> <warning> -<para ->There is no need to set the <guilabel ->User</guilabel -> directive to <systemitem class="username" ->root</systemitem ->, so never do this, as it only involves dangers. Should anyone discover security vulnerabilities in one of the used file filters, printer drivers or <acronym ->CGI</acronym -> programs, he could remotely execute arbitrary commands on your system with root user privileges. Always use an unprivileged account for the server directive <guilabel ->User</guilabel ->.</para> +<para>There is no need to set the <guilabel>User</guilabel> directive to <systemitem class="username">root</systemitem>, so never do this, as it only involves dangers. Should anyone discover security vulnerabilities in one of the used file filters, printer drivers or <acronym>CGI</acronym> programs, he could remotely execute arbitrary commands on your system with root user privileges. Always use an unprivileged account for the server directive <guilabel>User</guilabel>.</para> </warning> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Server group</guilabel -></term> +<term><guilabel>Server group</guilabel></term> <listitem> -<para ->The group the server runs under. Normally this must be <systemitem class="groupname" ->sys</systemitem ->, however you can configure things for another group as needed.</para> +<para>The group the server runs under. Normally this must be <systemitem class="groupname">sys</systemitem>, however you can configure things for another group as needed.</para> <informalexample> -<para ->Enter for example <userinput ->sys</userinput ->.</para> +<para>Enter for example <userinput>sys</userinput>.</para> </informalexample> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Remote user name</guilabel -></term> +<term><guilabel>Remote user name</guilabel></term> <listitem> -<para ->The name of the user assigned to unauthenticated accesses from remote systems. By default <userinput ->remroot</userinput ->.</para> +<para>The name of the user assigned to unauthenticated accesses from remote systems. By default <userinput>remroot</userinput>.</para> -<para ->This name will appear in log files and in queries about the job owner &etc;, for all resources and locations of the &CUPS; server that are configured to allow access <emphasis ->without</emphasis -> authentication. Authenticated entries will carry the authenticated names.</para> +<para>This name will appear in log files and in queries about the job owner &etc;, for all resources and locations of the &CUPS; server that are configured to allow access <emphasis>without</emphasis> authentication. Authenticated entries will carry the authenticated names.</para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="server-logging-configuration"> -<title ->Server Logging Configuration</title> +<title>Server Logging Configuration</title> -<para ->The server logging configuration is done on this screen. It includes:</para> +<para>The server logging configuration is done on this screen. It includes:</para> <itemizedlist> -<listitem -><para -><guilabel ->Access log file</guilabel -> setting</para -></listitem> -<listitem -><para -><guilabel ->Error log file</guilabel -> setting</para -></listitem> -<listitem -><para -><guilabel ->Page log</guilabel -> file setting</para -></listitem> -<listitem -><para -><guilabel ->Log level</guilabel -> setting</para -></listitem> -<listitem -><para -><guilabel ->Max log file size</guilabel -> setting</para -></listitem> +<listitem><para><guilabel>Access log file</guilabel> setting</para></listitem> +<listitem><para><guilabel>Error log file</guilabel> setting</para></listitem> +<listitem><para><guilabel>Page log</guilabel> file setting</para></listitem> +<listitem><para><guilabel>Log level</guilabel> setting</para></listitem> +<listitem><para><guilabel>Max log file size</guilabel> setting</para></listitem> </itemizedlist> -<para ->This is an important screen for you. Should you ever encounter problems: here is the place to set the Log level to <quote ->debug</quote ->, restart the &CUPS; daemon and then look at the Error log file defined here for entries that might give you an insight to the trouble.</para> +<para>This is an important screen for you. Should you ever encounter problems: here is the place to set the Log level to <quote>debug</quote>, restart the &CUPS; daemon and then look at the Error log file defined here for entries that might give you an insight to the trouble.</para> <screenshot> -<screeninfo ->&CUPS; server configuration dialogue: <guilabel ->Server logging</guilabel -> </screeninfo> +<screeninfo>&CUPS; server configuration dialogue: <guilabel>Server logging</guilabel> </screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration3_logging.png" format="PNG"/></imageobject> <textobject> -<phrase ->The dialogue to configure the &CUPS; server: <guilabel ->Server logging</guilabel -></phrase -></textobject> +<phrase>The dialogue to configure the &CUPS; server: <guilabel>Server logging</guilabel></phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Access log file</guilabel -></term> +<term><guilabel>Access log file</guilabel></term> <listitem> -<para ->This is where accesses to the server are logged. If this does not start with a leading <literal ->/</literal ->, then it is assumed to be relative to the server root.</para> +<para>This is where accesses to the server are logged. If this does not start with a leading <literal>/</literal>, then it is assumed to be relative to the server root.</para> -<para ->You can also use the special name <userinput ->syslog</userinput -> to send the output to the syslog file or daemon.</para> +<para>You can also use the special name <userinput>syslog</userinput> to send the output to the syslog file or daemon.</para> <informalexample> -<para ->Enter a path, for example <userinput -><filename ->/var/log/cups/acces_log</filename -></userinput ->.</para> +<para>Enter a path, for example <userinput><filename>/var/log/cups/acces_log</filename></userinput>.</para> </informalexample> -<para ->The format of this file is stored in the so-called <quote ->Common Log Format</quote ->. This way you can use programs such as <application ->Webalizer</application -> or any other Web access reporting tool to generate reports on the &CUPS; server activities.</para> - -<para ->To include the server name in the file name use a <token ->%s</token -> in the name. Example: <userinput -><filename ->/var/log/cups/access_log-%s</filename -></userinput ->.</para> - -<screen -><prompt ->kurt@transmeta:~ -></prompt -><userinput -><command ->tail</command -> <parameter ->/var/log/cups/access_log</parameter -></userinput> +<para>The format of this file is stored in the so-called <quote>Common Log Format</quote>. This way you can use programs such as <application>Webalizer</application> or any other Web access reporting tool to generate reports on the &CUPS; server activities.</para> + +<para>To include the server name in the file name use a <token>%s</token> in the name. Example: <userinput><filename>/var/log/cups/access_log-%s</filename></userinput>.</para> + +<screen><prompt>kurt@transmeta:~ ></prompt><userinput><command>tail</command> <parameter>/var/log/cups/access_log</parameter></userinput> <computeroutput> 127.0.0.1 - - [04/Aug/2001:20:11:39 +0100] "POST /printers/ HTTP/1.1" 200 109 127.0.0.1 - - [04/Aug/2001:20:11:39 +0100] "POST /admin/ HTTP/1.1" 401 0 @@ -818,127 +424,49 @@ format="PNG"/></imageobject> 127.0.0.1 - - [04/Aug/2001:20:11:40 +0100] "POST / HTTP/1.1" 200 139 10.160.16.45 - - [04/Aug/2001:20:11:39 +0100] "GET /printers/DANKA_P450 HTTP/1.0" 200 7319 10.160.16.45 - - [04/Aug/2001:20:11:40 +0100] "GET /images/title-logo.gif HTTP/1.0" 200 5729 -</computeroutput -></screen> - -<para ->You see a separate line for each single access, showing the <acronym ->IP</acronym -> address of the accessing client, date and time of access, method of access (<command ->POST</command -> or <command ->GET</command ->), the requested ressource, the &HTTP; version used by the client, status code and the number of transferred bytes. Status code <errorcode ->200</errorcode -> means <errorname ->successful-OK</errorname -> the <errorcode ->401</errorcode -> in the above example was an <errorname ->unauthorized access</errorname -> which was denied. For a detailed explanation of the log format go to <ulink url="http://localhost:631/sam.html#7_6_1" ->the &CUPS; Software Administrator Manual</ulink ->.</para> -</listitem> -</varlistentry> - -<varlistentry> -<term -><guilabel ->Error log file</guilabel -></term> -<listitem> -<para ->If this does not start with a leading <literal ->/</literal ->, then it is assumed to be relative to the server root. The default setting is <filename ->/var/log/cups/error_log</filename ->.</para> - -<para ->You can also use the special name <userinput ->syslog</userinput -> to send the output to the syslog file or daemon.</para> +</computeroutput></screen> + +<para>You see a separate line for each single access, showing the <acronym>IP</acronym> address of the accessing client, date and time of access, method of access (<command>POST</command> or <command>GET</command>), the requested ressource, the &HTTP; version used by the client, status code and the number of transferred bytes. Status code <errorcode>200</errorcode> means <errorname>successful-OK</errorname> the <errorcode>401</errorcode> in the above example was an <errorname>unauthorized access</errorname> which was denied. For a detailed explanation of the log format go to <ulink url="http://localhost:631/sam.html#7_6_1">the &CUPS; Software Administrator Manual</ulink>.</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Error log file</guilabel></term> +<listitem> +<para>If this does not start with a leading <literal>/</literal>, then it is assumed to be relative to the server root. The default setting is <filename>/var/log/cups/error_log</filename>.</para> + +<para>You can also use the special name <userinput>syslog</userinput> to send the output to the syslog file or daemon.</para> <informalexample> -<para ->Enter the path, for example <userinput -><filename ->/var/log/cups/error_log</filename -></userinput ->.</para> +<para>Enter the path, for example <userinput><filename>/var/log/cups/error_log</filename></userinput>.</para> </informalexample> -<para ->The error log excerpt below shows you the part logged for printing the test page with the default setting of <guilabel ->Log level</guilabel -> to <quote ->info</quote ->. For an explanation of the <guilabel ->Log Level</guilabel -> setting see further below.</para> - -<screen -><prompt ->kurt@transmeta:~ -></prompt -><userinput -><command -> tail </command -> <parameter ->/var/log/cups/error_log</parameter -></userinput> +<para>The error log excerpt below shows you the part logged for printing the test page with the default setting of <guilabel>Log level</guilabel> to <quote>info</quote>. For an explanation of the <guilabel>Log Level</guilabel> setting see further below.</para> + +<screen><prompt>kurt@transmeta:~ ></prompt><userinput><command> tail </command> <parameter>/var/log/cups/error_log</parameter></userinput> <computeroutput> I [04/Aug/2001:23:15:10 +0100] Job 213 queued on 'DANKA_P450' by 'root' I [04/Aug/2001:23:15:10 +0100] Started filter /usr/lib/cups/filter/pstops (PID 18891) for job 213. I [04/Aug/2001:23:15:10 +0100] Started backend /usr/lib/cups/backend/lpd (PID 18892) for job 213. -</computeroutput -></screen> +</computeroutput></screen> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Page log file</guilabel -></term> +<term><guilabel>Page log file</guilabel></term> <listitem> -<para ->If this does not start with a leading <literal ->/</literal -> then it is assumed to be relative to the server root. The default is <filename ->/var/log/cups/page_log</filename -></para> +<para>If this does not start with a leading <literal>/</literal> then it is assumed to be relative to the server root. The default is <filename>/var/log/cups/page_log</filename></para> -<para ->You can also use the special name <userinput ->syslog</userinput -> to send the output to the syslog file or daemon.</para> +<para>You can also use the special name <userinput>syslog</userinput> to send the output to the syslog file or daemon.</para> <informalexample> -<para ->Enter the path, for example <userinput -><filename ->/var/log/cups/page_log</filename -></userinput ->.</para> +<para>Enter the path, for example <userinput><filename>/var/log/cups/page_log</filename></userinput>.</para> </informalexample> -<para ->The page log file has a line for every single page of every job printed.</para> - -<para ->Here is what some entries look like:</para> - -<screen -><prompt ->kurt@transmeta:~ -></prompt -><userinput -><command -> tail </command -> <parameter ->/var/log/cups/page_log</parameter -></userinput> +<para>The page log file has a line for every single page of every job printed.</para> + +<para>Here is what some entries look like:</para> + +<screen><prompt>kurt@transmeta:~ ></prompt><userinput><command> tail </command> <parameter>/var/log/cups/page_log</parameter></userinput> <computeroutput> GIMP_print_stp_HP kdetest 201 [03/Aug/2001:03:18:03 +0100] 4 1 GIMP_print_stp_HP kdetest 201 [03/Aug/2001:03:18:03 +0100] 5 1 @@ -950,168 +478,81 @@ DANKA_infotec_P450 kurt 204 [04/Aug/2001:03:29:00 +0100] 3 33 DANKA_infotec_P450 kurt 204 [04/Aug/2001:03:29:00 +0100] 4 33 DANKA_infotec_P450 root 205 [04/Aug/2001:19:12:34 +0100] 1 14 DANKA_infotec_P450 root 206 [04/Aug/2001:19:15:20 +0100] 1 1 -</computeroutput -></screen> - -<para ->In this excerpt of the file you find information on the name of the printers (<systemitem class="resource" ->GIMP_print_stp_HP</systemitem -> and <systemitem class="resource" ->DANKA_infotec_P450</systemitem ->) used through this server, the user names (<systemitem class="username" ->kdetest</systemitem ->, <systemitem class="username" ->kurt</systemitem -> and <systemitem class="username" ->root</systemitem ->), the job-IDs (<quote ->201</quote -> to <quote ->205</quote ->), time of printing, page number inside the job and the number of copies for the pages. For example, job-ID 204 had 4 pages and 33 copies printed, job-ID 205 had 14 copies of just 1 page) .</para> +</computeroutput></screen> + +<para>In this excerpt of the file you find information on the name of the printers (<systemitem class="resource">GIMP_print_stp_HP</systemitem> and <systemitem class="resource">DANKA_infotec_P450</systemitem>) used through this server, the user names (<systemitem class="username">kdetest</systemitem>, <systemitem class="username">kurt</systemitem> and <systemitem class="username">root</systemitem>), the job-IDs (<quote>201</quote> to <quote>205</quote>), time of printing, page number inside the job and the number of copies for the pages. For example, job-ID 204 had 4 pages and 33 copies printed, job-ID 205 had 14 copies of just 1 page) .</para> <note> -<para ->&CUPS; is dependent (for its calculation of the number of pages in a job) on passing the &PostScript; through the <quote ->pstops</quote -> filter. See the <link linkend="architecture-diagram" ->&kivio; Flowchart</link -> on the &CUPS; filter architecture for an idea about were this filter fits into the whole printing process). More, <command ->pstops</command -> depends for the counting on a <acronym ->DSC</acronym -> conforming (<acronym ->DSC</acronym -> is Document Structuring Conventions, a standard defined by Adobe) to be sent by the client. In most cases this is working.</para> - -<para ->However, this page accounting does not work for any <quote ->raw</quote -> printer queues (as those, by definition, don't use any filtering on the &CUPS; host and are by-passing <command ->pstops</command ->.) Every job going through a <quote ->raw</quote -> queue is counted as a 1-page-job (with possibly multiple copies). This is especially true for all Jobs send from &Microsoft; &Windows; clients via <application ->Samba</application -> to the &CUPS; server, as those jobs are already arriving in the correct format for the printer, because the clients use the original printer driver.</para> +<para>&CUPS; is dependent (for its calculation of the number of pages in a job) on passing the &PostScript; through the <quote>pstops</quote> filter. See the <link linkend="architecture-diagram">&kivio; Flowchart</link> on the &CUPS; filter architecture for an idea about were this filter fits into the whole printing process). More, <command>pstops</command> depends for the counting on a <acronym>DSC</acronym> conforming (<acronym>DSC</acronym> is Document Structuring Conventions, a standard defined by Adobe) to be sent by the client. In most cases this is working.</para> + +<para>However, this page accounting does not work for any <quote>raw</quote> printer queues (as those, by definition, don't use any filtering on the &CUPS; host and are by-passing <command>pstops</command>.) Every job going through a <quote>raw</quote> queue is counted as a 1-page-job (with possibly multiple copies). This is especially true for all Jobs send from &Microsoft; &Windows; clients via <application>Samba</application> to the &CUPS; server, as those jobs are already arriving in the correct format for the printer, because the clients use the original printer driver.</para> </note> <note> -<para ->I am still looking for someone who will write a nice &CUPS; page log analysing tool. It should generate a report with a graphical output similar to the <application ->Webalizer</application ->'s access log reports. This way you could have nice statistics to be used for accounting about usage of printers, load dependent on daytime or weekday, users &etc; Anyone?</para> +<para>I am still looking for someone who will write a nice &CUPS; page log analysing tool. It should generate a report with a graphical output similar to the <application>Webalizer</application>'s access log reports. This way you could have nice statistics to be used for accounting about usage of printers, load dependent on daytime or weekday, users &etc; Anyone?</para> </note> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Log level</guilabel -></term> +<term><guilabel>Log level</guilabel></term> <listitem> -<para ->This setting controls the number of messages logged to the error log file. It can be one of the following:</para> +<para>This setting controls the number of messages logged to the error log file. It can be one of the following:</para> <variablelist> <varlistentry> -<term ->debug2</term> +<term>debug2</term> <listitem> -<para ->Log everything.</para> +<para>Log everything.</para> </listitem> </varlistentry> <varlistentry> -<term ->debug</term> +<term>debug</term> <listitem> -<para ->Log almost everything.</para> +<para>Log almost everything.</para> </listitem> </varlistentry> <varlistentry> -<term ->info</term> +<term>info</term> <listitem> -<para ->Log all requests and state changes.</para> +<para>Log all requests and state changes.</para> </listitem> </varlistentry> <varlistentry> -<term ->warn</term> +<term>warn</term> <listitem> -<para ->Log errors and warnings.</para> +<para>Log errors and warnings.</para> </listitem> </varlistentry> <varlistentry> -<term ->error</term> +<term>error</term> <listitem> -<para ->Log only errors.</para> +<para>Log only errors.</para> </listitem> </varlistentry> <varlistentry> -<term ->none</term> +<term>none</term> <listitem> -<para ->Log nothing.</para> +<para>Log nothing.</para> </listitem> </varlistentry> </variablelist> -<para ->If you need to troubleshoot (or if you want to study the inner workings of &CUPS;), set the log level to debug or debug2. Then the error_log will have a lot more entries (not just errors, but also informational entries).</para -> - -<para ->You can use this to watch <quote ->live</quote -> what &CUPS; is doing when you send a print job. In a &konsole; type:</para> - -<screen -><prompt ->kurt@transmeta:~ -></prompt -><userinput -><command ->tail</command -> <option ->-f</option -> <option ->-n</option -><parameter ->100</parameter -> <parameter ->/var/log/cups/error_log</parameter -></userinput -></screen> - -<para ->This will give you the last 100 lines (<option ->-n</option -> <parameter ->100</parameter ->) of the file onto the screen and a <quote ->realtime</quote -> update (<option ->-f</option ->)of what is happening. The following listing shows the printing of a test page (some pieces have been cut off for space reasons... Try it yourself if you need more info):</para> - -<screen -><computeroutput -> +<para>If you need to troubleshoot (or if you want to study the inner workings of &CUPS;), set the log level to debug or debug2. Then the error_log will have a lot more entries (not just errors, but also informational entries).</para> + +<para>You can use this to watch <quote>live</quote> what &CUPS; is doing when you send a print job. In a &konsole; type:</para> + +<screen><prompt>kurt@transmeta:~ ></prompt><userinput><command>tail</command> <option>-f</option> <option>-n</option><parameter>100</parameter> <parameter>/var/log/cups/error_log</parameter></userinput></screen> + +<para>This will give you the last 100 lines (<option>-n</option> <parameter>100</parameter>) of the file onto the screen and a <quote>realtime</quote> update (<option>-f</option>)of what is happening. The following listing shows the printing of a test page (some pieces have been cut off for space reasons... Try it yourself if you need more info):</para> + +<screen><computeroutput> I [04/Aug/2001:23:15:12 +0100] Job 214 queued on 'DANKA_P450' by 'root' D [04/Aug/2001:23:15:12 +0100] StartJob(214, 08426fe0) D [04/Aug/2001:23:15:12 +0100] StartJob() id = 214, file = 0/1 @@ -1130,36 +571,20 @@ D [04/Aug/2001:23:15:12 +0100] StartJob: backend = "/usr/lib/cups/backend/lpd" D [04/Aug/2001:23:15:12 +0100] StartJob: filterfds[1] = -1, 7 D [04/Aug/2001:23:15:12 +0100] start_process("/usr/lib/cups/backend/lpd", [....] I [04/Aug/2001:23:15:12 +0100] Started backend /usr/lib/cups/backend/lpd (PID 18992) for job 214. -D [04/Aug/2001:23:15:12 +0100] Page = 595x842; 15,16 to 580,833 [....] </computeroutput -></screen -> +D [04/Aug/2001:23:15:12 +0100] Page = 595x842; 15,16 to 580,833 [....] </computeroutput></screen> -<para ->The lines tagged <quote ->D</quote -> at the beginning are debug level entries, the ones tagged <quote ->I</quote -> are there in <quote ->info</quote -> level.</para> +<para>The lines tagged <quote>D</quote> at the beginning are debug level entries, the ones tagged <quote>I</quote> are there in <quote>info</quote> level.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Max log file size</guilabel -></term> +<term><guilabel>Max log file size</guilabel></term> <listitem> -<para ->Controls the maximum size of each log file before they are rotated. Defaults to 1048576 (1 Mb). Set this to 0 to disable log rotation.</para> +<para>Controls the maximum size of each log file before they are rotated. Defaults to 1048576 (1 Mb). Set this to 0 to disable log rotation.</para> <informalexample> -<para ->Enter an size in bytes, for example <userinput ->1048576</userinput -></para> +<para>Enter an size in bytes, for example <userinput>1048576</userinput></para> </informalexample> </listitem> @@ -1168,373 +593,195 @@ D [04/Aug/2001:23:15:12 +0100] Page = 595x842; 15,16 to 580,833 [....] </comput </sect1> <sect1 id="server-directories-configuration"> -<title ->Server Folders Configuration</title> +<title>Server Folders Configuration</title> -<para ->The dialogue to configure the &CUPS; server. Different folders are to be set here. Normally you don't need to change anything in this section. In case you play around with fancy (TrueType, &PostScript; or other) fonts on your system, this qis the place to do the settings for using those fonts when printing. Server folder settings include:</para> +<para>The dialogue to configure the &CUPS; server. Different folders are to be set here. Normally you don't need to change anything in this section. In case you play around with fancy (TrueType, &PostScript; or other) fonts on your system, this qis the place to do the settings for using those fonts when printing. Server folder settings include:</para> <itemizedlist> <listitem> -<para -><guilabel ->Executables</guilabel ->: where to find the server executables</para> +<para><guilabel>Executables</guilabel>: where to find the server executables</para> </listitem> <listitem> -<para -><guilabel ->Configuration</guilabel ->: where to find the server configuration files</para> +<para><guilabel>Configuration</guilabel>: where to find the server configuration files</para> </listitem> <listitem> -<para -><guilabel ->Data</guilabel ->: where to find the server data files</para> +<para><guilabel>Data</guilabel>: where to find the server data files</para> </listitem> <listitem> -<para -><guilabel ->Temporary files</guilabel ->: where to put the server temporary print files </para> +<para><guilabel>Temporary files</guilabel>: where to put the server temporary print files </para> </listitem> <listitem> -<para -><guilabel ->Temporary Requests</guilabel ->: where to find the server </para> +<para><guilabel>Temporary Requests</guilabel>: where to find the server </para> </listitem> <listitem> -<para -><guilabel ->Font Path</guilabel ->: where to find the server fonts</para> +<para><guilabel>Font Path</guilabel>: where to find the server fonts</para> </listitem> </itemizedlist> <screenshot> -<screeninfo ->&CUPS; server configuration dialogue: &HTTP; configuration</screeninfo> +<screeninfo>&CUPS; server configuration dialogue: &HTTP; configuration</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration4_directories.png" format="PNG"/></imageobject> <textobject> -<phrase ->The dialogue to configure the &CUPS; server: &HTTP; configuration</phrase -></textobject> +<phrase>The dialogue to configure the &CUPS; server: &HTTP; configuration</phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Executables</guilabel -></term> +<term><guilabel>Executables</guilabel></term> <listitem> -<para ->The root folder for the scheduler executables. By default this is <filename class="directory" ->/usr/lib/cups</filename -> (or <filename class="directory" ->/usr/lib32/cups</filename -> on IRIX 6.5)</para> +<para>The root folder for the scheduler executables. By default this is <filename class="directory">/usr/lib/cups</filename> (or <filename class="directory">/usr/lib32/cups</filename> on IRIX 6.5)</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Configuration</guilabel -></term> +<term><guilabel>Configuration</guilabel></term> <listitem> -<para ->The root folder for the scheduler. By default, <filename class="directory" ->/etc/cups</filename ->.</para> -<para ->On the authors SuSE system, this is <filename class="directory" ->/usr/share/doc/cups</filename ->. It contains all the <acronym ->HTML</acronym -> or <acronym ->PDF</acronym -> documentation for &CUPS; which is available through the Web interface at <ulink url="http://localhost:631/documentation.html" -> http://localhost:631/documentation.html</ulink -></para> +<para>The root folder for the scheduler. By default, <filename class="directory">/etc/cups</filename>.</para> +<para>On the authors SuSE system, this is <filename class="directory">/usr/share/doc/cups</filename>. It contains all the <acronym>HTML</acronym> or <acronym>PDF</acronym> documentation for &CUPS; which is available through the Web interface at <ulink url="http://localhost:631/documentation.html"> http://localhost:631/documentation.html</ulink></para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Data</guilabel -></term> +<term><guilabel>Data</guilabel></term> <listitem> -<para ->The root folder for the &CUPS; data files. By default this is <filename class="directory" ->/usr/share/cups</filename -></para> -<para ->It contains such things as banners, charsets, data, drivers, fonts, and <command ->pstoraster</command -> templates.</para> +<para>The root folder for the &CUPS; data files. By default this is <filename class="directory">/usr/share/cups</filename></para> +<para>It contains such things as banners, charsets, data, drivers, fonts, and <command>pstoraster</command> templates.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Temporary files</guilabel -></term> +<term><guilabel>Temporary files</guilabel></term> <listitem> -<para ->The folder to put temporary files in. This folder must be writable by the user defined on the previous screen. This defaults to either <filename class="directory" ->/var/spool/cups/tmp</filename -> or the value of the <envar ->TMPDIR</envar -> environment variable.</para> +<para>The folder to put temporary files in. This folder must be writable by the user defined on the previous screen. This defaults to either <filename class="directory">/var/spool/cups/tmp</filename> or the value of the <envar>TMPDIR</envar> environment variable.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Temporary Requests</guilabel -></term> +<term><guilabel>Temporary Requests</guilabel></term> <listitem> -<para ->The folder where request files are stored. By default this is <filename class="directory" ->/var/spool/cups</filename -></para> +<para>The folder where request files are stored. By default this is <filename class="directory">/var/spool/cups</filename></para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Font path</guilabel -></term> +<term><guilabel>Font path</guilabel></term> <listitem> -<para ->The place to configure the &CUPS; server for handling your fancy fonts (TrueType or &PostScript;). &CUPS; will look here for fonts to embed in printfiles. This currently only affects the <command ->pstoraster</command -> filter, and the default is <filename class="directory" ->/usr/share/cups/fonts</filename ->.</para> +<para>The place to configure the &CUPS; server for handling your fancy fonts (TrueType or &PostScript;). &CUPS; will look here for fonts to embed in printfiles. This currently only affects the <command>pstoraster</command> filter, and the default is <filename class="directory">/usr/share/cups/fonts</filename>.</para> -<para ->To specify more than one folder, list them with double colons as separator. Do it like this:</para> +<para>To specify more than one folder, list them with double colons as separator. Do it like this:</para> <informalexample> -<para -><userinput ->/path/to/first/fontdir/:/path/to/second/fontdir/:/path/to/last/fontdir/</userinput -></para> +<para><userinput>/path/to/first/fontdir/:/path/to/second/fontdir/:/path/to/last/fontdir/</userinput></para> </informalexample> -<para ->For the Font path directive to work as intended, the application that wants to print needs to:</para> +<para>For the Font path directive to work as intended, the application that wants to print needs to:</para> <itemizedlist> <listitem> -<para ->Either correctly reference its desired fonts in the header of the generated &PostScript;</para> +<para>Either correctly reference its desired fonts in the header of the generated &PostScript;</para> </listitem> <listitem> -<para ->Or embed the font into the &PostScript; file.</para> +<para>Or embed the font into the &PostScript; file.</para> </listitem> </itemizedlist> -<para -><emphasis ->Referencing</emphasis -> the font by name leaves it up to the <acronym ->RIP</acronym -> and print device to respect and actually use it. <acronym ->RIP</acronym -> or printer <emphasis ->can</emphasis -> only use the desired font, if it is available on the system.</para> - -<para ->In the case of a &PostScript; printer, this needs to be a printer-resident font. If the printer doesn't have this font, it will try and replace it by an adequately similar font.</para> - -<para ->In the case of a non &PostScript; printer, this is done by &CUPS; and its <acronym ->RIP</acronym ->-ing filtering system. &CUPS; will use the font path directive to grab the correct font when <acronym ->RIP</acronym ->-ing the &PostScript; in the <command ->pstoraster</command -> filter. </para> - -<para ->In the case of a &PostScript; output device, &CUPS; is just spooling the file (actually, it is passing it through the <command ->pstops</command -> filter for accounting or n-up purposes), not <quote ->working</quote -> on it. Therefore, if you print to a &PostScript; printer it is solely the printer's responsibility to use the font asked for. It can't, if the font is neither loaded into the printer nor embedded in the &PostScript;. </para> +<para><emphasis>Referencing</emphasis> the font by name leaves it up to the <acronym>RIP</acronym> and print device to respect and actually use it. <acronym>RIP</acronym> or printer <emphasis>can</emphasis> only use the desired font, if it is available on the system.</para> + +<para>In the case of a &PostScript; printer, this needs to be a printer-resident font. If the printer doesn't have this font, it will try and replace it by an adequately similar font.</para> + +<para>In the case of a non &PostScript; printer, this is done by &CUPS; and its <acronym>RIP</acronym>-ing filtering system. &CUPS; will use the font path directive to grab the correct font when <acronym>RIP</acronym>-ing the &PostScript; in the <command>pstoraster</command> filter. </para> + +<para>In the case of a &PostScript; output device, &CUPS; is just spooling the file (actually, it is passing it through the <command>pstops</command> filter for accounting or n-up purposes), not <quote>working</quote> on it. Therefore, if you print to a &PostScript; printer it is solely the printer's responsibility to use the font asked for. It can't, if the font is neither loaded into the printer nor embedded in the &PostScript;. </para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="server-configuration"> -<title ->Server <acronym ->HTTP</acronym -> Configuration</title> - -<para ->The dialogue to configure the &CUPS; server &HTTP; settings is shown here. </para> -<para ->&CUPS; server &HTTP; settings are the following ones: </para> +<title>Server <acronym>HTTP</acronym> Configuration</title> + +<para>The dialogue to configure the &CUPS; server &HTTP; settings is shown here. </para> +<para>&CUPS; server &HTTP; settings are the following ones: </para> <itemizedlist> -<listitem -><para ->the <guilabel ->Document folder</guilabel -></para -></listitem> -<listitem -><para ->the <guilabel ->Default Language</guilabel -></para -></listitem> -<listitem -><para ->the <guilabel ->Default Charset</guilabel -></para -></listitem> +<listitem><para>the <guilabel>Document folder</guilabel></para></listitem> +<listitem><para>the <guilabel>Default Language</guilabel></para></listitem> +<listitem><para>the <guilabel>Default Charset</guilabel></para></listitem> </itemizedlist> <screenshot> -<screeninfo ->Dialogue to configure the &CUPS; server &HTTP; settings </screeninfo> +<screeninfo>Dialogue to configure the &CUPS; server &HTTP; settings </screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration5_HTTP.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to configure the &CUPS; server &HTTP; settings </phrase -></textobject> +<phrase>Dialogue to configure the &CUPS; server &HTTP; settings </phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Document folder</guilabel -></term> +<term><guilabel>Document folder</guilabel></term> <listitem> -<para ->The root folder for &HTTP; documents that are served. By default the compiled in folder, <filename class="directory" ->/usr/share/cups/doc</filename -></para> +<para>The root folder for &HTTP; documents that are served. By default the compiled in folder, <filename class="directory">/usr/share/cups/doc</filename></para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Default Language</guilabel -></term> +<term><guilabel>Default Language</guilabel></term> <listitem> -<para ->The default language, if not specified by the browser. If not specified, the current locale is used.</para> +<para>The default language, if not specified by the browser. If not specified, the current locale is used.</para> <informalexample> -<para ->Use the two letter locale codes, for example <userinput ->en</userinput -> or <userinput ->de</userinput ->.</para> +<para>Use the two letter locale codes, for example <userinput>en</userinput> or <userinput>de</userinput>.</para> </informalexample> <!-- available languages? --> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Default charset</guilabel -></term> +<term><guilabel>Default charset</guilabel></term> <listitem> -<para ->The default character set to use. If not specified, this defaults to UTF-8. This can also be overridden directly in the <acronym ->HTML</acronym -> documents.</para> +<para>The default character set to use. If not specified, this defaults to UTF-8. This can also be overridden directly in the <acronym>HTML</acronym> documents.</para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="server-encryption-support-configuration"> -<title -><guilabel ->Server encryption support configuration</guilabel -></title> +<title><guilabel>Server encryption support configuration</guilabel></title> -<para ->This is the dialogue to configure the &CUPS; server security settings. The server encryption support settings are these: </para> +<para>This is the dialogue to configure the &CUPS; server security settings. The server encryption support settings are these: </para> <itemizedlist> -<listitem -><para -><guilabel ->Server certificate</guilabel ->: the file to read containing the server's certificate</para -></listitem -> -<listitem -><para ->Server key: the file to read containing the server's key</para -></listitem> +<listitem><para><guilabel>Server certificate</guilabel>: the file to read containing the server's certificate</para></listitem> +<listitem><para>Server key: the file to read containing the server's key</para></listitem> </itemizedlist> <screenshot> -<screeninfo ->&CUPS; server configuration dialogue: security overview</screeninfo> +<screeninfo>&CUPS; server configuration dialogue: security overview</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration6_encryption.png" format="PNG"/></imageobject> <textobject> -<phrase ->The dialogue to configure the &CUPS; server: security settings</phrase -></textobject> +<phrase>The dialogue to configure the &CUPS; server: security settings</phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Server certificate</guilabel -></term> +<term><guilabel>Server certificate</guilabel></term> <listitem> -<para ->The file to read containing the server's certificate. Defaults to <filename ->/etc/cups/ssl/server.crt</filename ->.</para> +<para>The file to read containing the server's certificate. Defaults to <filename>/etc/cups/ssl/server.crt</filename>.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Server key</guilabel -></term> +<term><guilabel>Server key</guilabel></term> <listitem> -<para ->The file to read containing the server's key. Defaults to <filename ->/etc/cups/ssl/server.key</filename -></para> +<para>The file to read containing the server's key. Defaults to <filename>/etc/cups/ssl/server.key</filename></para> </listitem> </varlistentry> </variablelist> @@ -1542,251 +789,124 @@ format="PNG"/></imageobject> </sect1> <sect1 id="server-miscellaneous-configuration"> -<title ->Server Miscellaneous Configuration</title> +<title>Server Miscellaneous Configuration</title> -<para ->The dialogue to configure the &CUPS; server miscellaneous settings is shown here. The following server settings are done through this screen:</para> +<para>The dialogue to configure the &CUPS; server miscellaneous settings is shown here. The following server settings are done through this screen:</para> <itemizedlist> -<listitem -><para -><guilabel ->Preserve job history</guilabel ->: whether to preserve a job history for later re-view</para -></listitem> -<listitem -><para -><guilabel ->Preserve job files</guilabel ->: whether to preserve fully <acronym ->RIP</acronym ->-ed job files for later re-print</para -></listitem -> -<listitem -><para -><guilabel ->Printcap file</guilabel ->: setting the name of and the path to a printcap file</para -></listitem> -<listitem -><para -><guilabel ->RIP Cache</guilabel ->: setting the size of the <acronym ->RIP</acronym -> cache in memory</para -></listitem> -<listitem -><para -><guilabel ->Filter Limit</guilabel ->: defining a filter limit</para -></listitem> +<listitem><para><guilabel>Preserve job history</guilabel>: whether to preserve a job history for later re-view</para></listitem> +<listitem><para><guilabel>Preserve job files</guilabel>: whether to preserve fully <acronym>RIP</acronym>-ed job files for later re-print</para></listitem> +<listitem><para><guilabel>Printcap file</guilabel>: setting the name of and the path to a printcap file</para></listitem> +<listitem><para><guilabel>RIP Cache</guilabel>: setting the size of the <acronym>RIP</acronym> cache in memory</para></listitem> +<listitem><para><guilabel>Filter Limit</guilabel>: defining a filter limit</para></listitem> </itemizedlist> <screenshot> -<screeninfo ->Dialogue to configure the &CUPS; server miscellaneous settings</screeninfo> +<screeninfo>Dialogue to configure the &CUPS; server miscellaneous settings</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration7_miscellanious.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to configure the &CUPS; server miscellaneous settings</phrase -></textobject> +<phrase>Dialogue to configure the &CUPS; server miscellaneous settings</phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Preserve job history (after completion)</guilabel -></term> +<term><guilabel>Preserve job history (after completion)</guilabel></term> <listitem> -<para ->Whether or not to preserve the job history after a job is completed, canceled, or stopped. The default is yes</para> +<para>Whether or not to preserve the job history after a job is completed, canceled, or stopped. The default is yes</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Preserve job file (after completion)</guilabel -></term> +<term><guilabel>Preserve job file (after completion)</guilabel></term> <listitem> -<para ->Whether or not to preserve the job files after a job is completed, canceled, or stopped. The default is no.</para> +<para>Whether or not to preserve the job files after a job is completed, canceled, or stopped. The default is no.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Printcap file</guilabel -></term> +<term><guilabel>Printcap file</guilabel></term> <listitem> -<para ->The name of the printcap file. The default is no filename. Leave this blank, to disable printcap file generation.</para> -<para ->The printcap setting is only needed to satisfy older applications in need of such a file.</para> +<para>The name of the printcap file. The default is no filename. Leave this blank, to disable printcap file generation.</para> +<para>The printcap setting is only needed to satisfy older applications in need of such a file.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->RIP cache</guilabel -></term> +<term><guilabel>RIP cache</guilabel></term> <listitem> -<para ->The amount of memory that each <acronym ->RIP</acronym -> should use to cache bitmaps. The value can be any real number, followed by <quote ->k</quote -> for kilobytes, <quote ->m</quote -> for megabytes, <quote ->g</quote ->for gigabytes, or <quote ->t</quote -> for tiles, where one tile is 256 x 256 pixels. The default value is 8m.</para> +<para>The amount of memory that each <acronym>RIP</acronym> should use to cache bitmaps. The value can be any real number, followed by <quote>k</quote> for kilobytes, <quote>m</quote> for megabytes, <quote>g</quote>for gigabytes, or <quote>t</quote> for tiles, where one tile is 256 x 256 pixels. The default value is 8m.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Filter limit</guilabel -></term> +<term><guilabel>Filter limit</guilabel></term> <listitem> -<para ->Sets the maximum cost of all job filters that can be run at the same time. A limit of 0 means no limit. A typical job may need a filter limit of at least 200. Limits less than the minimum required by a job force a single job to be printed at any time. The default limit is 0 (unlimited).</para> +<para>Sets the maximum cost of all job filters that can be run at the same time. A limit of 0 means no limit. A typical job may need a filter limit of at least 200. Limits less than the minimum required by a job force a single job to be printed at any time. The default limit is 0 (unlimited).</para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="network-general-configuration"> -<title ->Network General Configuration</title> +<title>Network General Configuration</title> -<para ->The dialogue to configure the &CUPS; server network settings is shown here. It includes:</para> +<para>The dialogue to configure the &CUPS; server network settings is shown here. It includes:</para> <itemizedlist> -<listitem -><para -><guilabel ->Look for hostname on IP addresses</guilabel -></para -></listitem> -<listitem -><para -><guilabel ->Port</guilabel -></para -></listitem> -<listitem -><para -><guilabel ->Max request size</guilabel -></para -></listitem> -<listitem -><para -><guilabel ->Timeout</guilabel -></para -></listitem> +<listitem><para><guilabel>Look for hostname on IP addresses</guilabel></para></listitem> +<listitem><para><guilabel>Port</guilabel></para></listitem> +<listitem><para><guilabel>Max request size</guilabel></para></listitem> +<listitem><para><guilabel>Timeout</guilabel></para></listitem> </itemizedlist> <screenshot> -<screeninfo ->Dialogue to configure the &CUPS; server network settings</screeninfo> +<screeninfo>Dialogue to configure the &CUPS; server network settings</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration8_networkgeneral.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to configure the &CUPS; server network settings</phrase -></textobject> +<phrase>Dialogue to configure the &CUPS; server network settings</phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Look for hostname on IP addresses</guilabel -></term> +<term><guilabel>Look for hostname on IP addresses</guilabel></term> <listitem> -<para ->Whether or not to do lookups on <acronym ->IP</acronym -> addresses to get a fully-qualified hostname. This defaults to off, for performance reasons.</para> +<para>Whether or not to do lookups on <acronym>IP</acronym> addresses to get a fully-qualified hostname. This defaults to off, for performance reasons.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Port</guilabel -></term> +<term><guilabel>Port</guilabel></term> <listitem> -<para ->Enter here Ports and addresses that the server will listen to. The default port 631 is reserved for the Internet Printing Protocol, and is what we use here.</para> -<para ->You can have multiple entries, to listen to more than one port or address, or to restrict access.</para> +<para>Enter here Ports and addresses that the server will listen to. The default port 631 is reserved for the Internet Printing Protocol, and is what we use here.</para> +<para>You can have multiple entries, to listen to more than one port or address, or to restrict access.</para> <note> -<para ->Unfortunately, most web browsers don't support <acronym ->TLS</acronym -> or &HTTP; upgrades for encryption. If you want to support web-based encryption, you'll probably need to listen on port 443, the <acronym ->HTTPS</acronym -> port.</para> +<para>Unfortunately, most web browsers don't support <acronym>TLS</acronym> or &HTTP; upgrades for encryption. If you want to support web-based encryption, you'll probably need to listen on port 443, the <acronym>HTTPS</acronym> port.</para> </note> -<para ->Use the <guibutton ->Add</guibutton -> and <guibutton ->Remove</guibutton -> buttons to add and remove entries from the list.</para> +<para>Use the <guibutton>Add</guibutton> and <guibutton>Remove</guibutton> buttons to add and remove entries from the list.</para> <informalexample> -<para ->You can enter ports on their own, ⪚ <userinput ->631</userinput ->, or hostnames with ports, ⪚ <userinput ->myhost:80</userinput -> or <userinput ->1.2.3.4:631</userinput ->.</para> +<para>You can enter ports on their own, ⪚ <userinput>631</userinput>, or hostnames with ports, ⪚ <userinput>myhost:80</userinput> or <userinput>1.2.3.4:631</userinput>.</para> </informalexample> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Max request size</guilabel -></term> +<term><guilabel>Max request size</guilabel></term> <listitem> -<para ->Controls the maximum size of &HTTP; requests and print files. The default setting is 0, which disables this feature.</para> +<para>Controls the maximum size of &HTTP; requests and print files. The default setting is 0, which disables this feature.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Timeout</guilabel -></term> +<term><guilabel>Timeout</guilabel></term> <listitem> -<para ->The timeout (in seconds) before requests time out. The default is 300 seconds.</para> +<para>The timeout (in seconds) before requests time out. The default is 300 seconds.</para> </listitem> </varlistentry> </variablelist> @@ -1794,73 +914,45 @@ format="PNG"/></imageobject> </sect1> <sect1 id="network-clients-configuration"> -<title ->Network Clients Configuration</title> +<title>Network Clients Configuration</title> -<para ->The dialogue to configure the &CUPS; network client settings is shown here. It includes:</para> +<para>The dialogue to configure the &CUPS; network client settings is shown here. It includes:</para> <itemizedlist> -<listitem -><para -><guilabel ->Accept "Keep Alive" requests</guilabel -></para -></listitem> -<listitem -><para ->KeepAliveTimeout:</para -> </listitem> -<listitem -><para ->MaxClients: </para -></listitem> +<listitem><para><guilabel>Accept "Keep Alive" requests</guilabel></para></listitem> +<listitem><para>KeepAliveTimeout:</para> </listitem> +<listitem><para>MaxClients: </para></listitem> </itemizedlist> <screenshot> -<screeninfo ->dialogue to configure the &CUPS; network client settings</screeninfo> +<screeninfo>dialogue to configure the &CUPS; network client settings</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration9_networkclients.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to configure the &CUPS; network client settings</phrase -></textobject> +<phrase>Dialogue to configure the &CUPS; network client settings</phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Accept "Keep Alive" requests</guilabel -></term> +<term><guilabel>Accept "Keep Alive" requests</guilabel></term> <listitem> -<para ->Whether or not to support the Keep-Alive connection option. The default is on.</para> +<para>Whether or not to support the Keep-Alive connection option. The default is on.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Keep alive timeout</guilabel -></term> +<term><guilabel>Keep alive timeout</guilabel></term> <listitem> -<para ->The timeout (in seconds) before Keep-Alive connections are automatically closed. The default is 60 seconds.</para> +<para>The timeout (in seconds) before Keep-Alive connections are automatically closed. The default is 60 seconds.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Max number of clients</guilabel -></term> +<term><guilabel>Max number of clients</guilabel></term> <listitem> -<para ->Controls the maximum number of simultaneous clients that will be handled. Defaults to 100.</para> +<para>Controls the maximum number of simultaneous clients that will be handled. Defaults to 100.</para> </listitem> </varlistentry> </variablelist> @@ -1868,405 +960,214 @@ format="PNG"/></imageobject> </sect1> <sect1 id="browsing-general-configuration"> -<title ->Browsing General Configuration</title> +<title>Browsing General Configuration</title> -<para ->The dialogue to configure the &CUPS; browsing general settings is shown here. It includes: </para> +<para>The dialogue to configure the &CUPS; browsing general settings is shown here. It includes: </para> <itemizedlist> -<listitem -><para -><guilabel ->Enable browsing</guilabel -></para -></listitem> -<listitem -><para -><guilabel ->Use short names when possible</guilabel -></para -></listitem> -<listitem -><para -><guilabel ->Use implicit classes</guilabel -></para -></listitem> +<listitem><para><guilabel>Enable browsing</guilabel></para></listitem> +<listitem><para><guilabel>Use short names when possible</guilabel></para></listitem> +<listitem><para><guilabel>Use implicit classes</guilabel></para></listitem> </itemizedlist> <screenshot> -<screeninfo ->Dialogue to configure the &CUPS; browsing general settings</screeninfo> +<screeninfo>Dialogue to configure the &CUPS; browsing general settings</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration10_browsinggeneral.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to configure the &CUPS; browsing general settings</phrase -></textobject> +<phrase>Dialogue to configure the &CUPS; browsing general settings</phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Enable browsing</guilabel -></term> +<term><guilabel>Enable browsing</guilabel></term> <listitem> -<para ->Whether or not to broadcast printer information to other &CUPS; servers. Enabled by default.</para> +<para>Whether or not to broadcast printer information to other &CUPS; servers. Enabled by default.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Use short names when possible</guilabel -></term> +<term><guilabel>Use short names when possible</guilabel></term> <listitem> -<para ->Whether or not to use <quote ->short</quote -> names for remote printers when possible (⪚ <systemitem class="resource" ->printer</systemitem -> instead of <systemitem class="resource" ->printer@host</systemitem ->). Enabled by default.</para> +<para>Whether or not to use <quote>short</quote> names for remote printers when possible (⪚ <systemitem class="resource">printer</systemitem> instead of <systemitem class="resource">printer@host</systemitem>). Enabled by default.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Use implicit classes</guilabel -></term> +<term><guilabel>Use implicit classes</guilabel></term> <listitem> -<para ->Whether or not to use implicit classes.</para> -<para ->Printer classes can be specified explicitly, in the <filename ->classes.conf</filename -> file, implicitly based upon the printers available on the <acronym ->LAN</acronym ->, or both.</para> -<para ->When Implicit classes are enabled, printers on the <acronym ->LAN</acronym -> with the same name (⪚ <systemitem class="resource" ->Acme-LaserPrint-1000</systemitem ->) will be put into a class with the same name. This allows you to setup multiple redundant queues on a <acronym ->LAN</acronym -> without a lot of administrative difficulties. If a user sends a job to <systemitem class="resource" ->Acme-LaserPrint-1000</systemitem ->, the job will go to the first available queue.</para> -<para ->This option is enabled by default.</para> +<para>Whether or not to use implicit classes.</para> +<para>Printer classes can be specified explicitly, in the <filename>classes.conf</filename> file, implicitly based upon the printers available on the <acronym>LAN</acronym>, or both.</para> +<para>When Implicit classes are enabled, printers on the <acronym>LAN</acronym> with the same name (⪚ <systemitem class="resource">Acme-LaserPrint-1000</systemitem>) will be put into a class with the same name. This allows you to setup multiple redundant queues on a <acronym>LAN</acronym> without a lot of administrative difficulties. If a user sends a job to <systemitem class="resource">Acme-LaserPrint-1000</systemitem>, the job will go to the first available queue.</para> +<para>This option is enabled by default.</para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="browsing-connection-configuration"> -<title ->Browsing Connection Configuration</title> +<title>Browsing Connection Configuration</title> -<para ->The dialogue to configure the &CUPS; server browsing connection is shown here. Browsing connection settings include:</para> +<para>The dialogue to configure the &CUPS; server browsing connection is shown here. Browsing connection settings include:</para> <itemizedlist> -<listitem -><para -><guilabel ->Broadcast addresses</guilabel ->: The (<acronym ->UDP</acronym ->) broadcast address to transmit printer information to</para -></listitem> -<listitem -><para -><guilabel ->Broadcast Port</guilabel ->: The port number to use for broadcasting</para -></listitem -> -<listitem -><para -><guilabel ->Poll addresses</guilabel ->: The address(es) to poll for information about printers on servers that might not broadcast (or whose broadcasts might not reach your <acronym ->LAN</acronym -> due to routers in between).</para -></listitem> +<listitem><para><guilabel>Broadcast addresses</guilabel>: The (<acronym>UDP</acronym>) broadcast address to transmit printer information to</para></listitem> +<listitem><para><guilabel>Broadcast Port</guilabel>: The port number to use for broadcasting</para></listitem> +<listitem><para><guilabel>Poll addresses</guilabel>: The address(es) to poll for information about printers on servers that might not broadcast (or whose broadcasts might not reach your <acronym>LAN</acronym> due to routers in between).</para></listitem> </itemizedlist> <screenshot> -<screeninfo ->Dialogue to configure the &CUPS; server browsing connection</screeninfo> +<screeninfo>Dialogue to configure the &CUPS; server browsing connection</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration11_browsingconnections.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to configure the &CUPS; server browsing connection</phrase -></textobject> +<phrase>Dialogue to configure the &CUPS; server browsing connection</phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Broadcast addresses</guilabel -></term> +<term><guilabel>Broadcast addresses</guilabel></term> <listitem> -<para ->After pressing the <guibutton ->Add</guibutton -> button, you will see the following dialogue to enter a new value for outgoing broadcasting browse packets. It is the same kind of dialogue as for adding other &CUPS; server addresses to be polled for printer information.</para> +<para>After pressing the <guibutton>Add</guibutton> button, you will see the following dialogue to enter a new value for outgoing broadcasting browse packets. It is the same kind of dialogue as for adding other &CUPS; server addresses to be polled for printer information.</para> <screenshot> -<screeninfo ->Dialogue to enter a new value for broadcasting browse packets to</screeninfo> +<screeninfo>Dialogue to enter a new value for broadcasting browse packets to</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfig_browsingmasks_add_button.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to enter a new value for broadcasting browse packets to</phrase -></textobject> +<phrase>Dialogue to enter a new value for broadcasting browse packets to</phrase></textobject> </mediaobject> </screenshot> -<para ->This option specifies a broadcast address to be used. By default, browsing information is broadcast to all active interfaces.</para> +<para>This option specifies a broadcast address to be used. By default, browsing information is broadcast to all active interfaces.</para> <note> -<para ->&HP-UX; 10.20 and earlier do not properly handle broadcast unless you have a Class A, B, C or D netmask (&ie;, there is no <acronym ->CIDR</acronym -> support).</para> +<para>&HP-UX; 10.20 and earlier do not properly handle broadcast unless you have a Class A, B, C or D netmask (&ie;, there is no <acronym>CIDR</acronym> support).</para> </note> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Broadcast port</guilabel -></term> +<term><guilabel>Broadcast port</guilabel></term> <listitem> -<para ->The port used for <acronym ->UDP</acronym -> broadcasts. By default this is the <acronym ->IPP</acronym -> port; if you change this, you need to do it on all servers. Only one BrowsePort is recognised.</para> +<para>The port used for <acronym>UDP</acronym> broadcasts. By default this is the <acronym>IPP</acronym> port; if you change this, you need to do it on all servers. Only one BrowsePort is recognised.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Poll addresses</guilabel -></term> +<term><guilabel>Poll addresses</guilabel></term> <listitem> -<para ->Poll the named server(s) for printers.</para> +<para>Poll the named server(s) for printers.</para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="browsing-masks-configuration"> -<title ->Browsing Masks Configuration</title> +<title>Browsing Masks Configuration</title> -<para ->The dialogue to configure the &CUPS; server allowed and/or denied browse packets from other servers is shown here. </para> +<para>The dialogue to configure the &CUPS; server allowed and/or denied browse packets from other servers is shown here. </para> <itemizedlist> -<listitem -><para -><guilabel ->Browse allow</guilabel ->: </para -></listitem> -<listitem -><para -><guilabel ->Browse deny</guilabel ->: </para -></listitem> -<listitem -><para -><guilabel ->Browse order</guilabel ->: </para -></listitem> +<listitem><para><guilabel>Browse allow</guilabel>: </para></listitem> +<listitem><para><guilabel>Browse deny</guilabel>: </para></listitem> +<listitem><para><guilabel>Browse order</guilabel>: </para></listitem> </itemizedlist> <screenshot> -<screeninfo ->Dialogue to configure the &CUPS; server allowed and/or denied browse packets from other servers</screeninfo> +<screeninfo>Dialogue to configure the &CUPS; server allowed and/or denied browse packets from other servers</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration11_browsingmasks.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to configure the &CUPS; server allowed and/or denied browse packets from other servers</phrase -></textobject> +<phrase>Dialogue to configure the &CUPS; server allowed and/or denied browse packets from other servers</phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Add Browse Address</guilabel -> dialogue</term> +<term><guilabel>Add Browse Address</guilabel> dialogue</term> <listitem> -<para ->The dialogue to enter a new value for the address of another &CUPS; server to accept browse packets from is shown here. It is opened by clicking on the <guibutton ->Add...</guibutton -> button beside the field named <guilabel ->Browse Allow:</guilabel ->. It is the same dialogue as for adding <quote ->denied</quote -> broadcast sending addresses.</para> +<para>The dialogue to enter a new value for the address of another &CUPS; server to accept browse packets from is shown here. It is opened by clicking on the <guibutton>Add...</guibutton> button beside the field named <guilabel>Browse Allow:</guilabel>. It is the same dialogue as for adding <quote>denied</quote> broadcast sending addresses.</para> -<para ->The dialogue to enter a new value for the address of another &CUPS; server to accept browse packets from is shown here.</para> +<para>The dialogue to enter a new value for the address of another &CUPS; server to accept browse packets from is shown here.</para> <screenshot> -<screeninfo ->Dialogue to enter a new value for the address of another &CUPS; server to accept browse packets from</screeninfo> +<screeninfo>Dialogue to enter a new value for the address of another &CUPS; server to accept browse packets from</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfig_browsingmasks_add_button.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to enter a new value for the address of another &CUPS; server to accept browse packets from</phrase -></textobject> +<phrase>Dialogue to enter a new value for the address of another &CUPS; server to accept browse packets from</phrase></textobject> </mediaobject> </screenshot> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Browse allow</guilabel -> and <guilabel ->Browse deny</guilabel -></term> +<term><guilabel>Browse allow</guilabel> and <guilabel>Browse deny</guilabel></term> <listitem> -<para -><guilabel ->Browse allow</guilabel -> specifies an address mask to allow for incoming browser packets. The default is to allow packets from all addresses.</para> -<para -><guilabel ->Browse deny</guilabel -> specifies an address mask to deny for incoming browser packets. The default is to deny packets from no addresses.</para> -<para ->Both <guilabel ->Browse allow</guilabel -> and <guilabel ->Browse deny</guilabel -> accept the following notations for addresses:</para> +<para><guilabel>Browse allow</guilabel> specifies an address mask to allow for incoming browser packets. The default is to allow packets from all addresses.</para> +<para><guilabel>Browse deny</guilabel> specifies an address mask to deny for incoming browser packets. The default is to deny packets from no addresses.</para> +<para>Both <guilabel>Browse allow</guilabel> and <guilabel>Browse deny</guilabel> accept the following notations for addresses:</para> <informalexample> <itemizedlist> <listitem> -<para -><userinput ->All</userinput -></para> +<para><userinput>All</userinput></para> </listitem> <listitem> -<para -><userinput ->None</userinput -></para> +<para><userinput>None</userinput></para> </listitem> <listitem> -<para -><userinput ->*.domain.com</userinput -></para> +<para><userinput>*.domain.com</userinput></para> </listitem> <listitem> -<para -><userinput ->.domain.com</userinput -></para> +<para><userinput>.domain.com</userinput></para> </listitem> <listitem> -<para -><userinput ->host.domain.com</userinput -></para> +<para><userinput>host.domain.com</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.*</userinput -></para> +<para><userinput>nnn.*</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.*</userinput -></para> +<para><userinput>nnn.nnn.*</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.*</userinput -></para> +<para><userinput>nnn.nnn.nnn.*</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.nnn</userinput -></para> +<para><userinput>nnn.nnn.nnn.nnn</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.nnn/mmm</userinput -></para> +<para><userinput>nnn.nnn.nnn.nnn/mmm</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm</userinput -></para> +<para><userinput>nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm</userinput></para> </listitem> </itemizedlist> </informalexample> -<para ->The hostname/domain name restrictions will only work if you have turned hostname lookups on!</para> +<para>The hostname/domain name restrictions will only work if you have turned hostname lookups on!</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Browse order</guilabel -></term> +<term><guilabel>Browse order</guilabel></term> <listitem> -<para ->Specifies the order of the allow/deny comparisons.</para> +<para>Specifies the order of the allow/deny comparisons.</para> </listitem> </varlistentry> </variablelist> @@ -2274,132 +1175,87 @@ format="PNG"/></imageobject> </sect1> <sect1 id="browsing-timeouts-configuration"> -<title ->Browsing Timeouts Configuration</title> +<title>Browsing Timeouts Configuration</title> -<para ->The dialogue to configure the &CUPS; server browse timeout settings is shown here. Browse timeout settings include:</para> +<para>The dialogue to configure the &CUPS; server browse timeout settings is shown here. Browse timeout settings include:</para> <itemizedlist> -<listitem -><para -><guilabel ->Browse Interval</guilabel -></para -></listitem> -<listitem -><para -><guilabel ->Browse Timeout</guilabel -></para -></listitem> +<listitem><para><guilabel>Browse Interval</guilabel></para></listitem> +<listitem><para><guilabel>Browse Timeout</guilabel></para></listitem> </itemizedlist> <screenshot> -<screeninfo ->Dialogue to configure the &CUPS; server browse timeout settings</screeninfo> +<screeninfo>Dialogue to configure the &CUPS; server browse timeout settings</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration12_browsingtimeouts.png" format="PNG"/></imageobject> <textobject> -<phrase ->dialogue to configure the &CUPS; server browse timeout settings</phrase -></textobject> +<phrase>dialogue to configure the &CUPS; server browse timeout settings</phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term -><guilabel ->Browse interval</guilabel -></term> +<term><guilabel>Browse interval</guilabel></term> <listitem> -<para ->The time between browsing updates in seconds. The default is 30 seconds.</para> -<para ->Note that browsing information is sent whenever a printer's state changes as well, so this represents the maximum time between updates.</para> -<para ->Set this to 0 to disable outgoing broadcasts so your local printers are not advertised, but you can still see printers on other hosts.</para> +<para>The time between browsing updates in seconds. The default is 30 seconds.</para> +<para>Note that browsing information is sent whenever a printer's state changes as well, so this represents the maximum time between updates.</para> +<para>Set this to 0 to disable outgoing broadcasts so your local printers are not advertised, but you can still see printers on other hosts.</para> </listitem> </varlistentry> <varlistentry> -<term ->Browse timeouts</term> +<term>Browse timeouts</term> <listitem> -<para ->The timeout (in seconds) for network printers - if we don't get an update within this time, the printer will be removed from the printer list.</para> -<para ->This number definitely should not be less than the browse interval period, for obvious reasons. Defaults to 300 seconds.</para> +<para>The timeout (in seconds) for network printers - if we don't get an update within this time, the printer will be removed from the printer list.</para> +<para>This number definitely should not be less than the browse interval period, for obvious reasons. Defaults to 300 seconds.</para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="browsing-relay-configuration"> -<title ->Browsing Relay Configuration</title> +<title>Browsing Relay Configuration</title> -<para ->The dialogue to configure the &CUPS; server as a browsing relay is shown here. Browsing relay settings include:</para> +<para>The dialogue to configure the &CUPS; server as a browsing relay is shown here. Browsing relay settings include:</para> <itemizedlist> -<listitem -><para -><guilabel ->Browser packets relay</guilabel -></para -></listitem> +<listitem><para><guilabel>Browser packets relay</guilabel></para></listitem> </itemizedlist> <screenshot> -<screeninfo ->Dialogue to configure the &CUPS; server as a browsing relay</screeninfo -> +<screeninfo>Dialogue to configure the &CUPS; server as a browsing relay</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration14_browsingrelay.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to configure the &CUPS; server as a browsing relay</phrase -></textobject -> +<phrase>Dialogue to configure the &CUPS; server as a browsing relay</phrase></textobject> </mediaobject> </screenshot> <variablelist> <varlistentry> -<term ->Add Browse Relay dialogue</term> +<term>Add Browse Relay dialogue</term> <listitem> -<para ->The dialogue to enter a new value for an address pair to define browsing relaying between a &CUPS; server and a network is shown here.</para> +<para>The dialogue to enter a new value for an address pair to define browsing relaying between a &CUPS; server and a network is shown here.</para> <screenshot> -<screeninfo ->The dialogue to enter a new value for an address pair to define browsing relaying between a &CUPS; server and a network</screeninfo> +<screeninfo>The dialogue to enter a new value for an address pair to define browsing relaying between a &CUPS; server and a network</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfig_browse_relay_add_button.png" format="PNG"/></imageobject> <textobject> -<phrase ->The dialogue to enter a new value for an address pair to define browsing relaying between a &CUPS; server and a network</phrase -></textobject> +<phrase>The dialogue to enter a new value for an address pair to define browsing relaying between a &CUPS; server and a network</phrase></textobject> </mediaobject> </screenshot> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Browser packets relay</guilabel -></term> +<term><guilabel>Browser packets relay</guilabel></term> <listitem> -<para ->Relay browser packets from one address or network to another.</para> +<para>Relay browser packets from one address or network to another.</para> </listitem> </varlistentry> </variablelist> @@ -2407,273 +1263,140 @@ format="PNG"/></imageobject> </sect1> <sect1 id="security-configuration"> -<title ->Security Configuration</title> +<title>Security Configuration</title> -<para ->The dialogue to configure the &CUPS; server security settings for any of the defined server locations is shown here. It contains the following settings, which may be defined separately for any valid resource (or location) of the &CUPS; server:</para> +<para>The dialogue to configure the &CUPS; server security settings for any of the defined server locations is shown here. It contains the following settings, which may be defined separately for any valid resource (or location) of the &CUPS; server:</para> <itemizedlist> -<listitem -><para ->System Group:</para -></listitem> -<listitem -><para ->Access Permissions: </para -></listitem> -<listitem -><para ->Auth Type:</para -></listitem> -<listitem -><para ->Auth Class:</para -></listitem> -<listitem -><para ->Auth Group Name:</para -></listitem> -<listitem -><para ->Encryption:</para -></listitem> -<listitem -><para ->Allow:</para -></listitem> -<listitem -><para ->Deny:</para -></listitem> -<listitem -><para ->Order:</para -></listitem> +<listitem><para>System Group:</para></listitem> +<listitem><para>Access Permissions: </para></listitem> +<listitem><para>Auth Type:</para></listitem> +<listitem><para>Auth Class:</para></listitem> +<listitem><para>Auth Group Name:</para></listitem> +<listitem><para>Encryption:</para></listitem> +<listitem><para>Allow:</para></listitem> +<listitem><para>Deny:</para></listitem> +<listitem><para>Order:</para></listitem> </itemizedlist> -<para ->Valid resources (or locations) of the &CUPS; server are:</para> +<para>Valid resources (or locations) of the &CUPS; server are:</para> <itemizedlist> -<listitem -><para ->Server Root Location: <systemitem class="resource" ->/</systemitem -> </para -></listitem -> -<listitem -><para ->Server Administration Location: <systemitem class="resource" ->/admin</systemitem -></para -></listitem> -<listitem -><para ->All printers on the server: <systemitem class="resource" ->/printers</systemitem -></para -></listitem> -<listitem -><para ->Any individual printer on the server: ⪚ <systemitem class="resource" ->/printers/infotec_P320</systemitem -></para -></listitem -> -<listitem -><para ->All printer classes on the server: <systemitem class="resource" ->/classes</systemitem ->:</para -></listitem -> -<listitem -><para ->Any individual printer class on the server: ⪚ <systemitem class="resource" ->/classes/all_infotecs_P320_or_P450</systemitem -></para -></listitem -> +<listitem><para>Server Root Location: <systemitem class="resource">/</systemitem> </para></listitem> +<listitem><para>Server Administration Location: <systemitem class="resource">/admin</systemitem></para></listitem> +<listitem><para>All printers on the server: <systemitem class="resource">/printers</systemitem></para></listitem> +<listitem><para>Any individual printer on the server: ⪚ <systemitem class="resource">/printers/infotec_P320</systemitem></para></listitem> +<listitem><para>All printer classes on the server: <systemitem class="resource">/classes</systemitem>:</para></listitem> +<listitem><para>Any individual printer class on the server: ⪚ <systemitem class="resource">/classes/all_infotecs_P320_or_P450</systemitem></para></listitem> </itemizedlist> <screenshot> -<screeninfo ->Dialogue to configure the &CUPS; server security settings for any of the defined server locations</screeninfo> +<screeninfo>Dialogue to configure the &CUPS; server security settings for any of the defined server locations</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration_securityoverview.png" format="PNG"/></imageobject> <textobject> -<phrase ->dialogue to configure the &CUPS; server security settings for any of the defined server locations</phrase -></textobject> +<phrase>dialogue to configure the &CUPS; server security settings for any of the defined server locations</phrase></textobject> </mediaobject> </screenshot> <note> -<para ->For all locations that are not defined separately the setting of the location <quote ->above</quote -> it is valid.</para> - -<para ->For example, you have a printer named <systemitem class="resource" ->infotec_P450</systemitem -> with no set security options. Then the security of the location <systemitem class="resource" ->/printers</systemitem -> will take the responsibility for this printer as it is a sub-location of<systemitem class="resource" ->/printers</systemitem ->. If, in turn there is no security set for <systemitem class="resource" ->/printers</systemitem ->, then the security for <systemitem class="resource" ->/</systemitem -> (the general security) of the server takes responsibility. Either you have set this for your purpose or the compiled-in default value takes over.</para> +<para>For all locations that are not defined separately the setting of the location <quote>above</quote> it is valid.</para> + +<para>For example, you have a printer named <systemitem class="resource">infotec_P450</systemitem> with no set security options. Then the security of the location <systemitem class="resource">/printers</systemitem> will take the responsibility for this printer as it is a sub-location of<systemitem class="resource">/printers</systemitem>. If, in turn there is no security set for <systemitem class="resource">/printers</systemitem>, then the security for <systemitem class="resource">/</systemitem> (the general security) of the server takes responsibility. Either you have set this for your purpose or the compiled-in default value takes over.</para> </note> <variablelist> <varlistentry> -<term ->SystemGroup</term> +<term>SystemGroup</term> <listitem> -<para ->The group name for <systemitem class="groupname" ->System</systemitem -> or printer administration access. The default varies depending on the operating system, but will be <systemitem class="groupname" ->sys</systemitem ->, <systemitem class="groupname" ->system</systemitem -> or <systemitem class="groupname" ->root</systemitem -> (checked for in that order).</para> +<para>The group name for <systemitem class="groupname">System</systemitem> or printer administration access. The default varies depending on the operating system, but will be <systemitem class="groupname">sys</systemitem>, <systemitem class="groupname">system</systemitem> or <systemitem class="groupname">root</systemitem> (checked for in that order).</para> </listitem> </varlistentry> <varlistentry> -<term ->Access Permissions</term> +<term>Access Permissions</term> <listitem> -<para ->Access permissions for each folder served by the scheduler. Locations are relative to the document root.</para> +<para>Access permissions for each folder served by the scheduler. Locations are relative to the document root.</para> </listitem> </varlistentry> <varlistentry> -<term ->Authorisation Type</term> +<term>Authorisation Type</term> <listitem> -<para ->The authorisation to use:</para> +<para>The authorisation to use:</para> <variablelist> <varlistentry> -<term ->None</term> +<term>None</term> <listitem> -<para ->Perform no authentication.</para> +<para>Perform no authentication.</para> </listitem> </varlistentry> <varlistentry> -<term ->Basic</term> +<term>Basic</term> <listitem> -<para ->Perform authentication using the &HTTP; Basic method.</para> +<para>Perform authentication using the &HTTP; Basic method.</para> </listitem> </varlistentry> <varlistentry> -<term ->Digest</term> +<term>Digest</term> <listitem> -<para ->Perform authentication using the &HTTP; Digest method.</para> +<para>Perform authentication using the &HTTP; Digest method.</para> </listitem> </varlistentry> </variablelist> <note> -<para ->Local certificate authentication can be substituted by the client for Basic or Digest, when connecting to the localhost interface.</para> +<para>Local certificate authentication can be substituted by the client for Basic or Digest, when connecting to the localhost interface.</para> </note> </listitem> </varlistentry> <varlistentry> -<term ->Authorisation Class</term> +<term>Authorisation Class</term> <listitem> -<para ->The authorisation class. Currently only <quote ->Anonymous</quote ->, <quote ->User</quote ->, <quote ->System</quote -> (valid user belonging to the group set as system group), and <quote ->group</quote -> (valid user belonging to the specified group) are supported.</para> +<para>The authorisation class. Currently only <quote>Anonymous</quote>, <quote>User</quote>, <quote>System</quote> (valid user belonging to the group set as system group), and <quote>group</quote> (valid user belonging to the specified group) are supported.</para> </listitem> </varlistentry> <varlistentry> -<term ->Authorisation Group Name</term> +<term>Authorisation Group Name</term> <listitem> -<para ->The group name for <quote ->Group</quote -> authorisation</para> +<para>The group name for <quote>Group</quote> authorisation</para> </listitem> </varlistentry> <varlistentry> -<term ->Encryption</term> +<term>Encryption</term> <listitem> -<para ->Whether or not to use encryption. This depends on having the <application ->OpenSSL</application -> linked into the &CUPS; library and scheduler.</para> -<para ->Possible values are:</para> +<para>Whether or not to use encryption. This depends on having the <application>OpenSSL</application> linked into the &CUPS; library and scheduler.</para> +<para>Possible values are:</para> <variablelist> <varlistentry> -<term ->Always</term> +<term>Always</term> <listitem> -<para ->Always use encryption (<acronym ->SSL</acronym ->)</para> +<para>Always use encryption (<acronym>SSL</acronym>)</para> </listitem> </varlistentry> <varlistentry> -<term ->Never</term> +<term>Never</term> <listitem> -<para ->Never use encryption.</para> +<para>Never use encryption.</para> </listitem> </varlistentry> <varlistentry> -<term ->Required</term> +<term>Required</term> <listitem> -<para ->Use <acronym ->TLS</acronym -> encryption upgrade.</para> +<para>Use <acronym>TLS</acronym> encryption upgrade.</para> </listitem> </varlistentry> <varlistentry> -<term ->IfRequested</term> +<term>IfRequested</term> <listitem> -<para ->Use encryption if the server requests it.</para> +<para>Use encryption if the server requests it.</para> </listitem> </varlistentry> </variablelist> @@ -2681,310 +1404,189 @@ format="PNG"/></imageobject> </varlistentry> <varlistentry> -<term -><guilabel ->Allow</guilabel -></term> +<term><guilabel>Allow</guilabel></term> <listitem> -<para ->Allows access from the specified hostname, domain, <acronym ->IP</acronym -> address or network. Possible values are:</para> +<para>Allows access from the specified hostname, domain, <acronym>IP</acronym> address or network. Possible values are:</para> <informalexample> <itemizedlist> <listitem> -<para -><userinput ->All</userinput -></para> +<para><userinput>All</userinput></para> </listitem> <listitem> -<para -><userinput ->None</userinput -></para> +<para><userinput>None</userinput></para> </listitem> <listitem> -<para -><userinput ->*.domain.com</userinput -></para> +<para><userinput>*.domain.com</userinput></para> </listitem> <listitem> -<para -><userinput ->.domain.com</userinput -></para> +<para><userinput>.domain.com</userinput></para> </listitem> <listitem> -<para -><userinput ->host.domain.com</userinput -></para> +<para><userinput>host.domain.com</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.*</userinput -></para> +<para><userinput>nnn.*</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.*</userinput -></para> +<para><userinput>nnn.nnn.*</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.*</userinput -></para> +<para><userinput>nnn.nnn.nnn.*</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.nnn</userinput -></para> +<para><userinput>nnn.nnn.nnn.nnn</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.nnn/mmm</userinput -></para> +<para><userinput>nnn.nnn.nnn.nnn/mmm</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm</userinput -></para> +<para><userinput>nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm</userinput></para> </listitem> </itemizedlist> </informalexample> -<para ->The host and domain address require that you enable hostname lookups, as described earlier.</para> +<para>The host and domain address require that you enable hostname lookups, as described earlier.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Deny</guilabel -></term> +<term><guilabel>Deny</guilabel></term> <listitem> -<para ->Denies access from the specified hostname, domain, <acronym ->IP</acronym -> address or network. Possible values are:</para> +<para>Denies access from the specified hostname, domain, <acronym>IP</acronym> address or network. Possible values are:</para> <informalexample> <itemizedlist> <listitem> -<para -><userinput ->All</userinput -></para> +<para><userinput>All</userinput></para> </listitem> <listitem> -<para -><userinput ->None</userinput -></para> +<para><userinput>None</userinput></para> </listitem> <listitem> -<para -><userinput ->*.domain.com</userinput -></para> +<para><userinput>*.domain.com</userinput></para> </listitem> <listitem> -<para -><userinput ->.domain.com</userinput -></para> +<para><userinput>.domain.com</userinput></para> </listitem> <listitem> -<para -><userinput ->host.domain.com</userinput -></para> +<para><userinput>host.domain.com</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.*</userinput -></para> +<para><userinput>nnn.*</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.*</userinput -></para> +<para><userinput>nnn.nnn.*</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.*</userinput -></para> +<para><userinput>nnn.nnn.nnn.*</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.nnn</userinput -></para> +<para><userinput>nnn.nnn.nnn.nnn</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.nnn/mmm</userinput -></para> +<para><userinput>nnn.nnn.nnn.nnn/mmm</userinput></para> </listitem> <listitem> -<para -><userinput ->nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm</userinput -></para> +<para><userinput>nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm</userinput></para> </listitem> </itemizedlist> </informalexample> -<para ->The host and domain address require that you enable hostname lookups, as described earlier.</para> +<para>The host and domain address require that you enable hostname lookups, as described earlier.</para> </listitem> </varlistentry> <varlistentry> -<term ->Order</term> +<term>Order</term> <listitem> -<para ->The order of the allow and deny processing.</para> +<para>The order of the allow and deny processing.</para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="example-how-define-security-for-all-printers"> -<title ->Example: How To Define The Security For All Printers</title> - -<para ->The dialogue to configure the &CUPS; server security settings is discussed here. We use the example to add security definitions other than the default ones for the resource named <systemitem class="resource" ->all printers</systemitem ->. For the &CUPS; web server, this is the location you access through <ulink url="http://localhost:631/printers/" -> http://localhost:631/printers/</ulink -> or (remotely) through <ulink url="http://cups.server.name:631/printers/" -> http://cups.server.name:631/printers/</ulink -></para> - -<para ->The first screenshot shows the general location for this setting. <guilabel ->Select</guilabel -> <guibutton ->Add</guibutton -> or <guibutton ->Modify</guibutton -> a resource for which you want to decide about its security settings.</para> +<title>Example: How To Define The Security For All Printers</title> + +<para>The dialogue to configure the &CUPS; server security settings is discussed here. We use the example to add security definitions other than the default ones for the resource named <systemitem class="resource">all printers</systemitem>. For the &CUPS; web server, this is the location you access through <ulink url="http://localhost:631/printers/"> http://localhost:631/printers/</ulink> or (remotely) through <ulink url="http://cups.server.name:631/printers/"> http://cups.server.name:631/printers/</ulink></para> + +<para>The first screenshot shows the general location for this setting. <guilabel>Select</guilabel> <guibutton>Add</guibutton> or <guibutton>Modify</guibutton> a resource for which you want to decide about its security settings.</para> <screenshot> -<screeninfo ->Dialogue to configure the &CUPS; server security settings</screeninfo -><mediaobject> +<screeninfo>Dialogue to configure the &CUPS; server security settings</screeninfo><mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration15a_resourceallprinters_defineaccess.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to configure the &CUPS; server security settings</phrase -></textobject> +<phrase>Dialogue to configure the &CUPS; server security settings</phrase></textobject> </mediaobject> </screenshot> -<para ->This dialogue is to add a new resource. It looks similar if you want to modify an already existing resource. Here are the general options:</para> +<para>This dialogue is to add a new resource. It looks similar if you want to modify an already existing resource. Here are the general options:</para> <screenshot> -<screeninfo ->Dialogue to add a new resource.</screeninfo> +<screeninfo>Dialogue to add a new resource.</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration15b_resourceallprinters_defineaccess.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to add a new resource.</phrase -></textobject> +<phrase>Dialogue to add a new resource.</phrase></textobject> </mediaobject> </screenshot> -<para ->.This is the second part or the dialogue is to add a new ressource. It looks similar if you want to modify an already existing resource. Here you define the actual access masks for the resource in question. </para> +<para>.This is the second part or the dialogue is to add a new ressource. It looks similar if you want to modify an already existing resource. Here you define the actual access masks for the resource in question. </para> <screenshot> -<screeninfo ->Dialogue to add a new resource.</screeninfo> +<screeninfo>Dialogue to add a new resource.</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration15c_resourceallprinters_defineaccess.png" format="PNG"/></imageobject> <textobject> -<phrase ->Dialogue to add a new resource.</phrase -></textobject> +<phrase>Dialogue to add a new resource.</phrase></textobject> </mediaobject> </screenshot> <screenshot> -<screeninfo ->Resource dialogue</screeninfo> +<screeninfo>Resource dialogue</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration_resourceadminaccessmasks.png" format="PNG"/></imageobject> <textobject> -<phrase ->Resource dialogue</phrase -></textobject> +<phrase>Resource dialogue</phrase></textobject> </mediaobject> </screenshot> <screenshot> -<screeninfo ->Resource dialogue</screeninfo> +<screeninfo>Resource dialogue</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration_resourceadminaddprinters.png" format="PNG"/></imageobject> <textobject> -<phrase ->Resource dialogue</phrase -></textobject> +<phrase>Resource dialogue</phrase></textobject> </mediaobject> </screenshot> <screenshot> -<screeninfo ->Resource dialogue</screeninfo> +<screeninfo>Resource dialogue</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration_resourceadminaddprinters_defineaccess.png" format="PNG"/></imageobject> <textobject> -<phrase ->Resource dialogue</phrase -></textobject> +<phrase>Resource dialogue</phrase></textobject> </mediaobject> </screenshot> <screenshot> -<screeninfo ->Resource dialogue</screeninfo> +<screeninfo>Resource dialogue</screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsserverconfiguration_resourceadminauthorization.png" format="PNG"/></imageobject> <textobject> -<phrase ->Resource dialogue</phrase -></textobject> +<phrase>Resource dialogue</phrase></textobject> </mediaobject> </screenshot> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/cupsoptions.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/cupsoptions.docbook index a6ecddc1ee0..50d5a4fd8f4 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/cupsoptions.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/cupsoptions.docbook @@ -1,84 +1,48 @@ <chapter id="cupsoptions-presently-outside-kcontrol"> -<title ->&CUPS; options presently not available through &kcontrol;</title> +<title>&CUPS; options presently not available through &kcontrol;</title> -<para ->This chapter gives you some hints about further configuration possibilities which may not be available through the &tdeprint; &GUI; interface to &CUPS;.</para> +<para>This chapter gives you some hints about further configuration possibilities which may not be available through the &tdeprint; &GUI; interface to &CUPS;.</para> <sect1> -<title ->Overview of provided features</title> +<title>Overview of provided features</title> -<para ->All of the most often used features and functions &CUPS; provides are supported in &tdeprint;.</para> +<para>All of the most often used features and functions &CUPS; provides are supported in &tdeprint;.</para> <itemizedlist> <listitem> -<para ->Printer management is supported: add, remove, modify, configure, test, disable, enable ...</para> +<para>Printer management is supported: add, remove, modify, configure, test, disable, enable ...</para> </listitem> <listitem> -<para ->Job management is supported: cancel, hold, release, move to different printer</para> +<para>Job management is supported: cancel, hold, release, move to different printer</para> </listitem> <listitem> -<para ->Print options: for full control as provided by &CUPS;.</para> +<para>Print options: for full control as provided by &CUPS;.</para> </listitem> </itemizedlist> </sect1> <sect1 id="where-to-find-further-chupshelp"> -<title ->Where to find help when using &CUPS;</title> +<title>Where to find help when using &CUPS;</title> -<para ->A lot of information about the inner workings of &CUPS; is available through the web interface, which &CUPS; will always support. It works with any browser (yes, even text-based ones). Just go to <ulink url="http://localhost:631/" ->http://localhost:631/</ulink -> for a start. There you find a link to locally available &CUPS; documentation in <acronym ->HTML</acronym -> and <acronym ->PDF</acronym -> if you are new to &CUPS;.</para> +<para>A lot of information about the inner workings of &CUPS; is available through the web interface, which &CUPS; will always support. It works with any browser (yes, even text-based ones). Just go to <ulink url="http://localhost:631/">http://localhost:631/</ulink> for a start. There you find a link to locally available &CUPS; documentation in <acronym>HTML</acronym> and <acronym>PDF</acronym> if you are new to &CUPS;.</para> -<para ->&CUPS; is accessible through other means than &tdeprint;: commandline and browser are two native &CUPS; interfaces. The many commandline utilities add up to the most complete control you have on &CUPS;. The web interface is only a subset of all available configuration or control options. </para> +<para>&CUPS; is accessible through other means than &tdeprint;: commandline and browser are two native &CUPS; interfaces. The many commandline utilities add up to the most complete control you have on &CUPS;. The web interface is only a subset of all available configuration or control options. </para> -<para ->This is also true for &tdeprint;. Generally, as &CUPS; develops, most new features will first be implemented through the commandline. Be sure to check the latest versions of the man pages for &CUPS; to stay up-to-date with new features after you install a new version.</para> +<para>This is also true for &tdeprint;. Generally, as &CUPS; develops, most new features will first be implemented through the commandline. Be sure to check the latest versions of the man pages for &CUPS; to stay up-to-date with new features after you install a new version.</para> <tip> -<para ->Depending on your update method for &CUPS;, your active configuration file might not have been re-placed by a new one; thus your new, more capable &CUPS;-daemon might not have been told by the old configuration file about the new features to use.</para> +<para>Depending on your update method for &CUPS;, your active configuration file might not have been re-placed by a new one; thus your new, more capable &CUPS;-daemon might not have been told by the old configuration file about the new features to use.</para> </tip> -<para ->A complete list of available files and man pages should always be in the &CUPS; Software Administrator Manual (<ulink url="http://localhost:631/sam.html#FILES" ->http://localhost:631/sam.html#FILES</ulink ->. In the &konqueror; &URL;/location field, type <userinput ->man:/lpadmin</userinput -> and <userinput ->man:/cupsd.conf</userinput -> to find out about the most important command and configuration file. You knew already about &konqueror;'s nice abilities to show you the traditional &UNIX; man pages, didn't you? Read this. From there you find more interesting hints and links to other man pages and documentation.</para> +<para>A complete list of available files and man pages should always be in the &CUPS; Software Administrator Manual (<ulink url="http://localhost:631/sam.html#FILES">http://localhost:631/sam.html#FILES</ulink>. In the &konqueror; &URL;/location field, type <userinput>man:/lpadmin</userinput> and <userinput>man:/cupsd.conf</userinput> to find out about the most important command and configuration file. You knew already about &konqueror;'s nice abilities to show you the traditional &UNIX; man pages, didn't you? Read this. From there you find more interesting hints and links to other man pages and documentation.</para> <sect2> -<title ->How to find &CUPS; related man pages</title> - -<para ->Here is a way to find out which &CUPS; related man pages there are on your system: </para> - -<screen -><prompt ->kurt@transmeta:~ -></prompt -> <userinput -><command ->apropos</command -> <parameter ->cups</parameter -></userinput> +<title>How to find &CUPS; related man pages</title> + +<para>Here is a way to find out which &CUPS; related man pages there are on your system: </para> + +<screen><prompt>kurt@transmeta:~ ></prompt> <userinput><command>apropos</command> <parameter>cups</parameter></userinput> <computeroutput> cups-calibrate (8)- ESP Printer Calibration Tool lpstat (1) - print cups status information @@ -103,429 +67,168 @@ lpadmin (8) - configure cups printers and classes printers.conf (5) - printer configuration file for cups cupsd.conf (5) - server configuration file for cups filter (1) - cups file conversion filter interfaces -</computeroutput -></screen> +</computeroutput></screen> </sect2> </sect1> <sect1 id="tips-and-tricks-for-cups"> -<title ->Outside &tdeprint;: Hints & Tips Tricks with &CUPS; on the Commandline</title> +<title>Outside &tdeprint;: Hints & Tips Tricks with &CUPS; on the Commandline</title> -<para ->Here are a few examples of options that are presently only available if you use the commandline. </para> +<para>Here are a few examples of options that are presently only available if you use the commandline. </para> <sect2> -<title ->Allowing or denying printer access for certain users</title> - -<para ->When installing (or modifying) a printer through the command line, you can either deny or allow the usage of that printer to certain users:</para> - -<screen -><userinput -><command ->lpadmin</command -> <option ->-p</option -><parameter ->HeidelbergDigimaster9110</parameter -> <option ->-v</option -> <parameter ->lpd:/10.160.16.99/mqueue</parameter -> <option ->-u</option -> <parameter ->allow:kurt,sylvi,hansjoerg</parameter -> <option ->-E</option -> <option ->-P</option -> <parameter ->/home/kurt/PPDs/DVHV.ppd</parameter -></userinput -></screen> - -<para ->will allow the usage of this (believe me: very nice and also very professional) printer to only the three mentioned users and at the same time deny it to all others. If another user wants to print on the DigiMaster via this &CUPS; server, he will receive an error message along the lines <errortype ->client-error-not-possible</errortype ->.</para> - -<screen -><userinput -><command ->lpadmin</command -> <option ->-p</option -> <parameter ->HeidelbergDigimaster9110</parameter -> <option ->-v</option -> <parameter ->lpd:/10.160.16.99/mqueue</parameter -> <option ->-u</option -> <parameter ->deny:tackat,boss,waba</parameter -> <option ->-E</option -> <option ->-P</option -> <parameter ->/home/kurt/PPDs/DVHV.ppd</parameter -></userinput -></screen> - -<para ->will deny the usage of this same printer to the three mentioned users and at the same time allow it to all others. If <quote ->denied</quote -> user wants to print on the DigiMaster via this &CUPS; server, he will receive an error message along the lines <errortype ->client-error-not-possible</errortype ->.</para> +<title>Allowing or denying printer access for certain users</title> + +<para>When installing (or modifying) a printer through the command line, you can either deny or allow the usage of that printer to certain users:</para> + +<screen><userinput><command>lpadmin</command> <option>-p</option><parameter>HeidelbergDigimaster9110</parameter> <option>-v</option> <parameter>lpd:/10.160.16.99/mqueue</parameter> <option>-u</option> <parameter>allow:kurt,sylvi,hansjoerg</parameter> <option>-E</option> <option>-P</option> <parameter>/home/kurt/PPDs/DVHV.ppd</parameter></userinput></screen> + +<para>will allow the usage of this (believe me: very nice and also very professional) printer to only the three mentioned users and at the same time deny it to all others. If another user wants to print on the DigiMaster via this &CUPS; server, he will receive an error message along the lines <errortype>client-error-not-possible</errortype>.</para> + +<screen><userinput><command>lpadmin</command> <option>-p</option> <parameter>HeidelbergDigimaster9110</parameter> <option>-v</option> <parameter>lpd:/10.160.16.99/mqueue</parameter> <option>-u</option> <parameter>deny:tackat,boss,waba</parameter> <option>-E</option> <option>-P</option> <parameter>/home/kurt/PPDs/DVHV.ppd</parameter></userinput></screen> + +<para>will deny the usage of this same printer to the three mentioned users and at the same time allow it to all others. If <quote>denied</quote> user wants to print on the DigiMaster via this &CUPS; server, he will receive an error message along the lines <errortype>client-error-not-possible</errortype>.</para> <note> -<para ->Only one of the two options may be used at one time; at present there is no support to have a similar option in a per-group based way. This will be implemented in the future.</para> +<para>Only one of the two options may be used at one time; at present there is no support to have a similar option in a per-group based way. This will be implemented in the future.</para> </note> </sect2> <sect2> -<title ->Imposing Quotas for certain printers</title> +<title>Imposing Quotas for certain printers</title> -<para ->Sometimes you want to impose quotas for certain printers. With quotas you can set upper limits for the number of pages or the amount of data to be printed over a certain period to a certain printer.</para> +<para>Sometimes you want to impose quotas for certain printers. With quotas you can set upper limits for the number of pages or the amount of data to be printed over a certain period to a certain printer.</para> -<para ->Quotas can be set with the <option ->-o</option -> option when installing a printer with the <command ->lpadmin</command -> command, or afterwards for an already existing printer. Following are some guidelines (which are missing at the time of writing in the, official &CUPS; documentation):</para> +<para>Quotas can be set with the <option>-o</option> option when installing a printer with the <command>lpadmin</command> command, or afterwards for an already existing printer. Following are some guidelines (which are missing at the time of writing in the, official &CUPS; documentation):</para> <itemizedlist> <listitem> -<para ->With &CUPS; you may have pagecount- and filesize-based quotas for individual printers.</para> +<para>With &CUPS; you may have pagecount- and filesize-based quotas for individual printers.</para> </listitem> <listitem> -<para ->Quotas are calculated for each user individually (so a single set of limits applies to all users for the printer concerned).</para> +<para>Quotas are calculated for each user individually (so a single set of limits applies to all users for the printer concerned).</para> </listitem> <listitem> -<para ->Quotas include banner pages (if those are used).</para> +<para>Quotas include banner pages (if those are used).</para> </listitem> <listitem> -<para ->This means: you can limit every user to 20 pages per day on an expensive printer, but you cannot limit every user except <systemitem class="username" ->Kurt</systemitem -> or <systemitem class="username" ->root</systemitem ->.</para> +<para>This means: you can limit every user to 20 pages per day on an expensive printer, but you cannot limit every user except <systemitem class="username">Kurt</systemitem> or <systemitem class="username">root</systemitem>.</para> </listitem> <listitem> -<para ->There are <option ->job-k-limit</option ->, <option ->job-page-limit</option ->, and <option ->job-quota-period</option -> options to give when setting up a printer.</para> +<para>There are <option>job-k-limit</option>, <option>job-page-limit</option>, and <option>job-quota-period</option> options to give when setting up a printer.</para> </listitem> <listitem> -<para -><option ->job-quota-period</option -> sets a time interval for quota computing (intervals are determined in seconds; so a day is 60x60x24=86.400, a week is 60x60x24x7=604,800, and a month is 60x60x24x30=2.592.000 seconds.)</para> +<para><option>job-quota-period</option> sets a time interval for quota computing (intervals are determined in seconds; so a day is 60x60x24=86.400, a week is 60x60x24x7=604,800, and a month is 60x60x24x30=2.592.000 seconds.)</para> </listitem> <listitem> -<para ->For quotas to be enforced, the time-period <emphasis ->plus</emphasis -> at least one job-limit must be set to non-zero.</para> +<para>For quotas to be enforced, the time-period <emphasis>plus</emphasis> at least one job-limit must be set to non-zero.</para> </listitem> <listitem> -<para ->The default value of 0 for <option ->job-k-limit</option -> specifies that there is no limit.</para> +<para>The default value of 0 for <option>job-k-limit</option> specifies that there is no limit.</para> </listitem> <listitem> -<para ->The default value of 0 for <option ->job-page-limit</option -> specifies that there is no limit.</para> +<para>The default value of 0 for <option>job-page-limit</option> specifies that there is no limit.</para> </listitem> <listitem> -<para ->The default value of 0 for <option ->job-quota-period</option -> specifies that the limits apply to all jobs that have been printed by a user that are still known to the system.</para> +<para>The default value of 0 for <option>job-quota-period</option> specifies that the limits apply to all jobs that have been printed by a user that are still known to the system.</para> </listitem> </itemizedlist> <sect3> -<title ->Working Examples:</title> - -<para ->Working, as both, time-period <emphasis ->plus</emphasis -> one or both job-limits are defined</para> - -<screen -><userinput -><command ->lpadmin</command -> <option ->-p</option -> <parameter ->danka_infotec_4850</parameter -> <option ->-o</option -> <parameter ->job-quota-period=604800</parameter -> <option ->-o</option -> <parameter ->job-k-limit=1024</parameter -></userinput -></screen> - -<para ->This sets a limit of a file size of 1 MB (in total) for each user of existing printer <systemitem class="resource" ->danka_infotec_4850</systemitem -> during one week.</para> - -<screen -><userinput -><command ->lpadmin</command -> <option ->p</option -> <parameter ->danka_infotec_4105</parameter -> <option ->-o</option -> <parameter ->job-quota-period=604800</parameter -> <option ->-o</option -> <parameter ->job-page-limit=100</parameter -></userinput -></screen> - -<para ->This sets a limit of 100 pages (in total) for each user of existing printer <systemitem class="resource" ->danka_infotec_4105</systemitem -> during one week.</para> - -<screen -><userinput -><command ->lpadmin</command -> <option ->-p</option -> <parameter ->danka_infotec_P450</parameter -> <option ->-o</option -> <parameter ->job-quota-period=604800</parameter -> <option ->-o</option -> <parameter ->job-k-limit=1024</parameter -> <option ->-o</option -> <parameter ->job-page-limit=100</parameter -></userinput -></screen> - -<para ->This sets a combined limit of 1 MB (in total) and 100 pages (in total) for each user of existing printer <systemitem class="resource" ->danka_infotec_P450</systemitem -> during one week. Whichever limit is reached first will take effect.</para> +<title>Working Examples:</title> + +<para>Working, as both, time-period <emphasis>plus</emphasis> one or both job-limits are defined</para> + +<screen><userinput><command>lpadmin</command> <option>-p</option> <parameter>danka_infotec_4850</parameter> <option>-o</option> <parameter>job-quota-period=604800</parameter> <option>-o</option> <parameter>job-k-limit=1024</parameter></userinput></screen> + +<para>This sets a limit of a file size of 1 MB (in total) for each user of existing printer <systemitem class="resource">danka_infotec_4850</systemitem> during one week.</para> + +<screen><userinput><command>lpadmin</command> <option>p</option> <parameter>danka_infotec_4105</parameter> <option>-o</option> <parameter>job-quota-period=604800</parameter> <option>-o</option> <parameter>job-page-limit=100</parameter></userinput></screen> + +<para>This sets a limit of 100 pages (in total) for each user of existing printer <systemitem class="resource">danka_infotec_4105</systemitem> during one week.</para> + +<screen><userinput><command>lpadmin</command> <option>-p</option> <parameter>danka_infotec_P450</parameter> <option>-o</option> <parameter>job-quota-period=604800</parameter> <option>-o</option> <parameter>job-k-limit=1024</parameter> <option>-o</option> <parameter>job-page-limit=100</parameter></userinput></screen> + +<para>This sets a combined limit of 1 MB (in total) and 100 pages (in total) for each user of existing printer <systemitem class="resource">danka_infotec_P450</systemitem> during one week. Whichever limit is reached first will take effect.</para> </sect3> <sect3> -<title ->Not working examples</title> - -<para -><emphasis ->NOT</emphasis -> working, as only <emphasis ->one</emphasis ->, time-period <emphasis ->or</emphasis -> job-limit is defined)</para> - -<screen -><userinput -><command ->lpadmin</command -> <option ->-p</option -> <parameter ->danka_infotec_P320</parameter -> <option ->-o</option -> <parameter ->job-quota-period=604800</parameter -></userinput> - -<userinput -><command ->lpadmin</command -> <option ->-p</option -> <parameter ->danka_infotec_FullColor</parameter -> <option ->-o</option -> <parameter ->job-page-limit=100</parameter -></userinput> - -<userinput -><command ->lpadmin</command -> <option ->-p</option -> <parameter ->danka_infotec_HiSpeed</parameter -> <option ->-o</option -> <parameter ->job-k-limit=1024</parameter -></userinput -></screen> +<title>Not working examples</title> + +<para><emphasis>NOT</emphasis> working, as only <emphasis>one</emphasis>, time-period <emphasis>or</emphasis> job-limit is defined)</para> + +<screen><userinput><command>lpadmin</command> <option>-p</option> <parameter>danka_infotec_P320</parameter> <option>-o</option> <parameter>job-quota-period=604800</parameter></userinput> + +<userinput><command>lpadmin</command> <option>-p</option> <parameter>danka_infotec_FullColor</parameter> <option>-o</option> <parameter>job-page-limit=100</parameter></userinput> + +<userinput><command>lpadmin</command> <option>-p</option> <parameter>danka_infotec_HiSpeed</parameter> <option>-o</option> <parameter>job-k-limit=1024</parameter></userinput></screen> </sect3> <sect3> -<title ->Related Error Messages</title> +<title>Related Error Messages</title> -<para ->Once a user reaches his quota limit, he'll get a <errortype ->client-error-not-possible</errortype -> message, if he wants to print.</para> +<para>Once a user reaches his quota limit, he'll get a <errortype>client-error-not-possible</errortype> message, if he wants to print.</para> </sect3> </sect2> <sect2> -<title ->Installing a <quote ->raw</quote -> printer</title> - -<para ->There are different ways to define a <quote ->raw</quote -> printer. One comfortable one is to use the <command ->lpadmin</command -> command. Just don't define a &PPD; file to be used for that printer and it will be a raw one:</para> - -<screen -><userinput -><command ->lpadmin</command -> <option ->-p</option -> <parameter ->Raw_Danka_infotec</parameter -> <option ->-E</option -> <option ->-v</option -> <parameter ->lpd://10.160.16.137/PORT1</parameter -></userinput -></screen> - -<para ->Raw printer queues are those which don't touch the print file to transform it to a different file format. You need this for example when printing from &Windows; clients via Samba through a &CUPS; server to a <acronym ->PCL</acronym -> printer: in this case the &Windows; side printer driver would generate the finished print file format for the target printer and filtering it through &CUPS; filters would only harm the purpose. Under certain circumstances (if you want to make sure that the file goes to the printer <quote ->unfiltered</quote -> by &CUPS;) the <quote -><command ->lpadmin</command -> without a &PPD;</quote -> comes in handy.</para> +<title>Installing a <quote>raw</quote> printer</title> + +<para>There are different ways to define a <quote>raw</quote> printer. One comfortable one is to use the <command>lpadmin</command> command. Just don't define a &PPD; file to be used for that printer and it will be a raw one:</para> + +<screen><userinput><command>lpadmin</command> <option>-p</option> <parameter>Raw_Danka_infotec</parameter> <option>-E</option> <option>-v</option> <parameter>lpd://10.160.16.137/PORT1</parameter></userinput></screen> + +<para>Raw printer queues are those which don't touch the print file to transform it to a different file format. You need this for example when printing from &Windows; clients via Samba through a &CUPS; server to a <acronym>PCL</acronym> printer: in this case the &Windows; side printer driver would generate the finished print file format for the target printer and filtering it through &CUPS; filters would only harm the purpose. Under certain circumstances (if you want to make sure that the file goes to the printer <quote>unfiltered</quote> by &CUPS;) the <quote><command>lpadmin</command> without a &PPD;</quote> comes in handy.</para> </sect2> </sect1> <sect1 id="troubleshooting-cups"> -<title ->Troubleshooting &CUPS; in &tdeprint;</title> +<title>Troubleshooting &CUPS; in &tdeprint;</title> -<para ->This section of the &tdeprint; Handbook will live from the readers' feedback. Here is just a small beginning.</para> +<para>This section of the &tdeprint; Handbook will live from the readers' feedback. Here is just a small beginning.</para> <sect2> -<title ->Error Messages</title> +<title>Error Messages</title> <qandaset> <qandaentry> <question> -<para ->What does the error <errortype ->client-error-bad-request</errortype -> mean?</para> +<para>What does the error <errortype>client-error-bad-request</errortype> mean?</para> </question> <answer> -<para ->The user sent a file to the &CUPS; which the server could not process. You get this also upon sending an <quote ->empty</quote -> file.</para> +<para>The user sent a file to the &CUPS; which the server could not process. You get this also upon sending an <quote>empty</quote> file.</para> </answer> </qandaentry> <qandaentry> <question> -<para ->And <errortype ->client-error-not-possible</errortype ->?</para> +<para>And <errortype>client-error-not-possible</errortype>?</para> </question> <answer> -<para ->User is either not allowed to print to a certain printer or has achieved his quota (based on file size and/or page number)</para> +<para>User is either not allowed to print to a certain printer or has achieved his quota (based on file size and/or page number)</para> </answer> </qandaentry> <qandaentry> <question> -<para ->How about <errortype ->client-error-not-found</errortype ->?</para> +<para>How about <errortype>client-error-not-found</errortype>?</para> </question> <answer> -<para ->The user tried to access a nonexistent resource on the &CUPS; server, such as trying to print a nonexistent file, or one that you are denied permission to read.</para> +<para>The user tried to access a nonexistent resource on the &CUPS; server, such as trying to print a nonexistent file, or one that you are denied permission to read.</para> </answer> </qandaentry> @@ -534,362 +237,165 @@ filter (1) - cups file conversion filter interfaces </sect2> <sect2> -<title ->Questions and Answers</title> +<title>Questions and Answers</title> <qandaset> <qandaentry> <question> -<para ->Why can't I re-start my jobs?</para> +<para>Why can't I re-start my jobs?</para> </question> <answer> -<para ->To be able to re-start your <quote ->completed</quote -> jobs from the web interface, you need a setting in the <filename ->/etc/cups/cupsd.conf</filename -> file: set <userinput ->PreserveJobFiles True</userinput ->.</para> +<para>To be able to re-start your <quote>completed</quote> jobs from the web interface, you need a setting in the <filename>/etc/cups/cupsd.conf</filename> file: set <userinput>PreserveJobFiles True</userinput>.</para> </answer> </qandaentry> <qandaentry> <question> -<para ->How do I get rid of the long list of completed jobs in the web interface?</para> +<para>How do I get rid of the long list of completed jobs in the web interface?</para> </question> <answer> -<para ->TODO</para> +<para>TODO</para> </answer> </qandaentry> <qandaentry> <question> -<para ->How does page accounting work?</para> +<para>How does page accounting work?</para> </question> <answer> -<para ->&CUPS; does the <quote ->print accounting</quote -> by passing nearly every job through the <quote ->pstops</quote -> filter. This one does, amongst other things, the page counting. Output of this filter there may be piped into other filters (like pstoraster --> rastertopcl) or sent to the printer directly (if it is a &PostScript; printer).</para> - -<para ->In any case, this works for network, parallel, serial or <acronym ->USB</acronym -> printers the same. For pstops to work, it needs <acronym ->DSC</acronym ->, Document Structuring Convention compliant &PostScript; (or near-equivalent) as input. So it calculates the pages during filtering on the print server and writes info about every single page (what time, which user, which job-ID and -name, which printer, how many copies of which pages of the document, how many kilo-bytes?) into <filename ->/var/log/cups/page_log</filename ->.</para> - -<para ->By the way: on my personal <quote ->wishlist</quote -> is a hack of <quote ->webalizer</quote -> to read and analyse the page_log and give a similar output. Anyone?</para> - -<para ->However, it is <emphasis ->not</emphasis -> giving correct results in the following cases:</para> +<para>&CUPS; does the <quote>print accounting</quote> by passing nearly every job through the <quote>pstops</quote> filter. This one does, amongst other things, the page counting. Output of this filter there may be piped into other filters (like pstoraster --> rastertopcl) or sent to the printer directly (if it is a &PostScript; printer).</para> + +<para>In any case, this works for network, parallel, serial or <acronym>USB</acronym> printers the same. For pstops to work, it needs <acronym>DSC</acronym>, Document Structuring Convention compliant &PostScript; (or near-equivalent) as input. So it calculates the pages during filtering on the print server and writes info about every single page (what time, which user, which job-ID and -name, which printer, how many copies of which pages of the document, how many kilo-bytes?) into <filename>/var/log/cups/page_log</filename>.</para> + +<para>By the way: on my personal <quote>wishlist</quote> is a hack of <quote>webalizer</quote> to read and analyse the page_log and give a similar output. Anyone?</para> + +<para>However, it is <emphasis>not</emphasis> giving correct results in the following cases:</para> <itemizedlist> <listitem> -<para ->The printer jams and maybe therefore throw away the job (real live experience; or maybe throwing away the job because of problems with the data format)</para> +<para>The printer jams and maybe therefore throw away the job (real live experience; or maybe throwing away the job because of problems with the data format)</para> </listitem> <listitem> -<para ->Jobs printed as <quote ->raw</quote -> are always counted as size of 1 page (and maybe multiple copies).</para> +<para>Jobs printed as <quote>raw</quote> are always counted as size of 1 page (and maybe multiple copies).</para> </listitem> </itemizedlist> -<para ->Therefore the page accounting of &CUPS; is <quote ->only</quote -> an approximation (in many cases an excellent or at least good one, in others a quite poor one). The only reliable print count is the one done by the internal printer counter. (Because this is the one you pay for, if you are on a <quote ->click price</quote -> or similar.) Some, by far not most, printers can be queried remotely for that information via <acronym ->SNMP</acronym -> (Simple Network Management Protocol). That means, in a bigger network with many different printers there <emphasis ->is</emphasis -> just no completely reliable and accurate page accounting tool!</para> +<para>Therefore the page accounting of &CUPS; is <quote>only</quote> an approximation (in many cases an excellent or at least good one, in others a quite poor one). The only reliable print count is the one done by the internal printer counter. (Because this is the one you pay for, if you are on a <quote>click price</quote> or similar.) Some, by far not most, printers can be queried remotely for that information via <acronym>SNMP</acronym> (Simple Network Management Protocol). That means, in a bigger network with many different printers there <emphasis>is</emphasis> just no completely reliable and accurate page accounting tool!</para> </answer> </qandaentry> <qandaentry> <question> -<para ->Why doesn't page-accounting work with &Windows; clients?</para> +<para>Why doesn't page-accounting work with &Windows; clients?</para> </question> <answer> -<para ->From &Windows; clients jobs nearly always need to be sent as <quote ->raw</quote ->. Why? If &CUPS; works as a print server for &Windows; clients using the original native &Windows; driver for the target print device, this guarantees the correct formatting of the job on the clients already; therefor the server should not touch it and print <quote ->raw</quote ->; therefor no filtering is started (and this is not even possible as the input from the clients is not &PostScript; as pstops expects; hence no page-count other than the default <quote ->1</quote ->.</para> +<para>From &Windows; clients jobs nearly always need to be sent as <quote>raw</quote>. Why? If &CUPS; works as a print server for &Windows; clients using the original native &Windows; driver for the target print device, this guarantees the correct formatting of the job on the clients already; therefor the server should not touch it and print <quote>raw</quote>; therefor no filtering is started (and this is not even possible as the input from the clients is not &PostScript; as pstops expects; hence no page-count other than the default <quote>1</quote>.</para> </answer> </qandaentry> <qandaentry> <question> -<para ->How do I get a list of available options for a given printer or a &PPD; file?</para> +<para>How do I get a list of available options for a given printer or a &PPD; file?</para> </question> <answer> -<para ->See the man page for the <command ->lpoptions</command -> command. You may investigate a &CUPS;-enabled box about any option of its available printers. There is no need to have the printer installed locally. As long as the printer is available locally (through the &CUPS; <quote ->printer browsing</quote -> feature), it will also work remote.</para> - -<para ->To query for a printers' option typing <userinput -><command ->lpoptions</command -> <option ->-p</option -> <parameter ->HitachiDDP70MicroPress</parameter -> <option ->-l</option -></userinput -> will give a long listing of all available options as read from the &PPD; file for the given Hitachi-Printer (in my case installed on remote server transmeta). Remote server <systemitem class="systemname" ->Transmeta</systemitem -> and its &CUPS; daemon as well as the localhost's &CUPS; daemon need to be up and running for this to succeed.</para> +<para>See the man page for the <command>lpoptions</command> command. You may investigate a &CUPS;-enabled box about any option of its available printers. There is no need to have the printer installed locally. As long as the printer is available locally (through the &CUPS; <quote>printer browsing</quote> feature), it will also work remote.</para> + +<para>To query for a printers' option typing <userinput><command>lpoptions</command> <option>-p</option> <parameter>HitachiDDP70MicroPress</parameter> <option>-l</option></userinput> will give a long listing of all available options as read from the &PPD; file for the given Hitachi-Printer (in my case installed on remote server transmeta). Remote server <systemitem class="systemname">Transmeta</systemitem> and its &CUPS; daemon as well as the localhost's &CUPS; daemon need to be up and running for this to succeed.</para> </answer> </qandaentry> <qandaentry> <question> -<para ->How do I read the listing retrieved by the <command ->lpoptions</command -> command?</para> +<para>How do I read the listing retrieved by the <command>lpoptions</command> command?</para> </question> <answer> -<para ->You know that for &PostScript; printer manufacturers it is <quote ->legal</quote -> to define their own internal names and procedures even for standard &PostScript; options. As long as the driver is able to retrieve the option from the &PPD; and show it to the user in a way that he understands it everything is OK. But what do <emphasis ->you</emphasis -> do, if you want to use some obscure printer options on the command line? How do you find out its exact syntax?</para> - -<para ->Let's take an example. Looking at Hitachi's DDP70 printer and how it implements duplex printing is revealing somehow. How do you tell how to print double sided? duplex or Duplex? Or another name altogether?.</para> - -<screen -><userinput -><command ->lpoptions</command -> <option ->-h</option -> <parameter ->transmeta</parameter -> <option ->-p</option -> <parameter ->Hitachi_DDP70_ClusterPrintingSystem</parameter -> <option ->-l</option -> | <command ->grep</command -> <parameter ->uplex</parameter -></userinput -></screen> - -<para ->This leads to the output</para> - -<screen -><computeroutput ->TR-Duplex/Duplex: False *True</computeroutput -></screen> - -<para ->This is to be interpreted like follows:</para> +<para>You know that for &PostScript; printer manufacturers it is <quote>legal</quote> to define their own internal names and procedures even for standard &PostScript; options. As long as the driver is able to retrieve the option from the &PPD; and show it to the user in a way that he understands it everything is OK. But what do <emphasis>you</emphasis> do, if you want to use some obscure printer options on the command line? How do you find out its exact syntax?</para> + +<para>Let's take an example. Looking at Hitachi's DDP70 printer and how it implements duplex printing is revealing somehow. How do you tell how to print double sided? duplex or Duplex? Or another name altogether?.</para> + +<screen><userinput><command>lpoptions</command> <option>-h</option> <parameter>transmeta</parameter> <option>-p</option> <parameter>Hitachi_DDP70_ClusterPrintingSystem</parameter> <option>-l</option> | <command>grep</command> <parameter>uplex</parameter></userinput></screen> + +<para>This leads to the output</para> + +<screen><computeroutput>TR-Duplex/Duplex: False *True</computeroutput></screen> + +<para>This is to be interpreted like follows:</para> <itemizedlist> <listitem> -<para ->The name of the investigated option is <option ->TR-Duplex</option ->;</para> +<para>The name of the investigated option is <option>TR-Duplex</option>;</para> </listitem> <listitem> -<para ->Behind the slash you see the translation of the option, as it should be shown in a &GUI; or Web interface (<quote ->Duplex</quote ->);</para> +<para>Behind the slash you see the translation of the option, as it should be shown in a &GUI; or Web interface (<quote>Duplex</quote>);</para> </listitem> <listitem> -<para ->The option may take one of the two values <parameter ->False</parameter -> or <parameter ->True</parameter ->;</para> +<para>The option may take one of the two values <parameter>False</parameter> or <parameter>True</parameter>;</para> </listitem> <listitem> -<para ->The present setting is <parameter ->True</parameter -> to be recognised by the marking with a star <literal ->*</literal ->.</para> +<para>The present setting is <parameter>True</parameter> to be recognised by the marking with a star <literal>*</literal>.</para> </listitem> </itemizedlist> -<para ->To override the present default setting (duplex) and print a job in simplex, you need to use the following command: </para> - -<screen -><userinput -><command ->lpr</command -> <option ->-P</option -> <parameter ->Hitachi_DDP70_ClusterPrintingSystem</parameter -> <option ->-o</option -> <parameter ->TR-Duplex=False</parameter -> <parameter ->/path/to/your/printjob</parameter -></userinput -></screen> +<para>To override the present default setting (duplex) and print a job in simplex, you need to use the following command: </para> + +<screen><userinput><command>lpr</command> <option>-P</option> <parameter>Hitachi_DDP70_ClusterPrintingSystem</parameter> <option>-o</option> <parameter>TR-Duplex=False</parameter> <parameter>/path/to/your/printjob</parameter></userinput></screen> </answer> </qandaentry> <qandaentry> <question> -<para ->How do I get a nicely formatted listing of available options for a given printer or &PPD;?</para> +<para>How do I get a nicely formatted listing of available options for a given printer or &PPD;?</para> </question> <answer> -<para ->Use the <command ->lphelp</command -> command which may be installed on your system locally. There is not yet a man page for <command ->lphelp</command ->.</para> - -<screen -><userinput -><command ->lphelp</command -> <parameter ->infotecP450</parameter -></userinput -></screen> - -<para ->This lists the available options for the named printer. It is nicely formatted and does explain every available option and how to use it. You can query different printers' options at once:</para> - -<screen -><userinput -><command ->lphelp</command -> <parameter ->infotec7410color</parameter -> <parameter ->DANKA_fullcolor_D2000</parameter -> <parameter ->HP_ColorLaserJet8550</parameter -></userinput -></screen> - -<para ->It also works for &PPD; files. Just specify the path to the &PPD;:</para> - -<screen -><userinput -><command ->lphelp</command -> <filename ->/home/kurt/PPDs/HP-ColorLaserJet8550.ppd</filename -></userinput -></screen> +<para>Use the <command>lphelp</command> command which may be installed on your system locally. There is not yet a man page for <command>lphelp</command>.</para> + +<screen><userinput><command>lphelp</command> <parameter>infotecP450</parameter></userinput></screen> + +<para>This lists the available options for the named printer. It is nicely formatted and does explain every available option and how to use it. You can query different printers' options at once:</para> + +<screen><userinput><command>lphelp</command> <parameter>infotec7410color</parameter> <parameter>DANKA_fullcolor_D2000</parameter> <parameter>HP_ColorLaserJet8550</parameter></userinput></screen> + +<para>It also works for &PPD; files. Just specify the path to the &PPD;:</para> + +<screen><userinput><command>lphelp</command> <filename>/home/kurt/PPDs/HP-ColorLaserJet8550.ppd</filename></userinput></screen> </answer> </qandaentry> </qandaset> </sect2> <sect2> -<title ->Solving Problems</title> +<title>Solving Problems</title> -<para ->No system is perfect. Here are some commonly seen traps people have fallen into.</para> +<para>No system is perfect. Here are some commonly seen traps people have fallen into.</para> <qandaset> <qandaentry> <question> -<para ->My printer named <quote ->3-lp-duplex</quote -> shows erratic behaviour. What's wrong?</para> +<para>My printer named <quote>3-lp-duplex</quote> shows erratic behaviour. What's wrong?</para> </question> <answer> -<para ->The printer names used in &CUPS; shall start with a letter and may contain up to 128 letters, numbers or underscores. Using dashes may lead to problems. Speaking about naming: printer names in &CUPS; are not case sensitive. So a printer named <systemitem class="resource" ->Best_of_Danka</systemitem -> will be the same as <systemitem class="resource" ->best_of_danka</systemitem -> or <systemitem class="resource" ->BEST_OF_DANKA</systemitem ->. (This is a requirement of &IPP;, which &CUPS; is fully compliant with).</para> +<para>The printer names used in &CUPS; shall start with a letter and may contain up to 128 letters, numbers or underscores. Using dashes may lead to problems. Speaking about naming: printer names in &CUPS; are not case sensitive. So a printer named <systemitem class="resource">Best_of_Danka</systemitem> will be the same as <systemitem class="resource">best_of_danka</systemitem> or <systemitem class="resource">BEST_OF_DANKA</systemitem>. (This is a requirement of &IPP;, which &CUPS; is fully compliant with).</para> </answer> </qandaentry> <qandaentry> <question> -<para ->Why do I get <errortype ->Unable to connect to SAMBA host: Success</errortype -> with my printer shares from &Windows; accessed via Samba?</para> +<para>Why do I get <errortype>Unable to connect to SAMBA host: Success</errortype> with my printer shares from &Windows; accessed via Samba?</para> </question> <answer> -<para ->Are the rights on the remote &Windows; box set correctly for you? Are you actually allowed to print on the &Windows; shared printer?</para> +<para>Are the rights on the remote &Windows; box set correctly for you? Are you actually allowed to print on the &Windows; shared printer?</para> </answer> </qandaentry> <qandaentry> <question> -<para ->My files for printer <systemitem class="resource" ->lp</systemitem -> sometimes mysteriously disappear and two days later I am told they got printed on a printer three floors below my office. What is going on?</para> +<para>My files for printer <systemitem class="resource">lp</systemitem> sometimes mysteriously disappear and two days later I am told they got printed on a printer three floors below my office. What is going on?</para> </question> <answer> -<para ->Believe me, it is very unlikely that your printer is the only one with the name <systemitem class="resource" ->lp</systemitem ->. Maybe &CUPS; is playing a trick on you. As you might have the setting <quote ->ImplicitClasses On</quote -> activated, &CUPS; tries to stuff all printers it sees on the network into a <quote ->Class</quote -> name lp. All jobs destined to lp are sent to this class and the first available member prints it. So if you had this nice fellow (who listened closely when you raved about &CUPS; and &tdeprint;) install &CUPS; and poke around the system...get the idea?</para> - -<para ->Take my advice: choose a unique name for any network printer! (Mind you, the one on your parallel port also turns out to be a network printer for the rest of the world if you don't take care of your settings).</para> +<para>Believe me, it is very unlikely that your printer is the only one with the name <systemitem class="resource">lp</systemitem>. Maybe &CUPS; is playing a trick on you. As you might have the setting <quote>ImplicitClasses On</quote> activated, &CUPS; tries to stuff all printers it sees on the network into a <quote>Class</quote> name lp. All jobs destined to lp are sent to this class and the first available member prints it. So if you had this nice fellow (who listened closely when you raved about &CUPS; and &tdeprint;) install &CUPS; and poke around the system...get the idea?</para> + +<para>Take my advice: choose a unique name for any network printer! (Mind you, the one on your parallel port also turns out to be a network printer for the rest of the world if you don't take care of your settings).</para> </answer> </qandaentry> </qandaset> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/extensions.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/extensions.docbook index 8d1feffc7ba..19c5daf9827 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/extensions.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/extensions.docbook @@ -1,86 +1,53 @@ <chapter id="extensions-to-all-printsubsystems"> -<title ->&tdeprint; Extensions To All Print Subsystems</title> +<title>&tdeprint; Extensions To All Print Subsystems</title> <sect1> -<title -><quote ->Virtual</quote -> Printers</title> +<title><quote>Virtual</quote> Printers</title> <sect2> -<title ->The <quote ->Fax</quote -> Printer</title> +<title>The <quote>Fax</quote> Printer</title> -<para ->To be written</para> +<para>To be written</para> </sect2> <sect2> -<title ->The <quote ->File</quote -> Printer</title> +<title>The <quote>File</quote> Printer</title> -<para ->To be written</para> +<para>To be written</para> </sect2> <sect2> -<title ->The <quote -><acronym ->PDF</acronym -></quote -> Printer</title> +<title>The <quote><acronym>PDF</acronym></quote> Printer</title> -<para ->To be written</para> +<para>To be written</para> </sect2> </sect1> <sect1 id="external-filters"> -<title -><quote ->External</quote -> Filters</title> +<title><quote>External</quote> Filters</title> <sect2> -<title ->The <command ->enscript</command -> Filter for Text Files</title> +<title>The <command>enscript</command> Filter for Text Files</title> -<para ->To be written</para> +<para>To be written</para> </sect2> <sect2> -<title ->The <quote ->n-up</quote -> Filter for Any File</title> +<title>The <quote>n-up</quote> Filter for Any File</title> -<para ->To be written</para> +<para>To be written</para> </sect2> <sect2> -<title ->Three different <quote ->Make Pamphlet</quote -> Filters for &PostScript; Files</title> +<title>Three different <quote>Make Pamphlet</quote> Filters for &PostScript; Files</title> -<para ->To be written</para> +<para>To be written</para> </sect2> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/external-command.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/external-command.docbook index 40f62dde1a0..04bd961a719 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/external-command.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/external-command.docbook @@ -1,26 +1,20 @@ <chapter id="external-printcommand-module"> -<title ->Module For External Print Command (&Netscape;-like) </title> +<title>Module For External Print Command (&Netscape;-like) </title> -<para ->This module allows the print command to be specified completely (&Netscape;-like). An edit line is added in the print dialogue for that purpose. Can be used in many cases, for example with a self-made print program. </para> +<para>This module allows the print command to be specified completely (&Netscape;-like). An edit line is added in the print dialogue for that purpose. Can be used in many cases, for example with a self-made print program. </para> <sect1> -<title ->Overview of provided features</title> +<title>Overview of provided features</title> <itemizedlist> <listitem> -<para ->Printer management: not supported</para> +<para>Printer management: not supported</para> </listitem> <listitem> -<para ->Job management: not supported.</para> +<para>Job management: not supported.</para> </listitem> <listitem> -<para ->Print options: basic control, depending on your knowledge of the print command</para> +<para>Print options: basic control, depending on your knowledge of the print command</para> </listitem> </itemizedlist> </sect1> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/final-word.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/final-word.docbook index 7fb084fd0e4..2a9fbf094ae 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/final-word.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/final-word.docbook @@ -1,91 +1,59 @@ <chapter id="final-word-from-author"> -<title ->Final word from the Author</title> +<title>Final word from the Author</title> <sect1 id="who-am-i"> -<title ->Who am I, what is my business? </title> +<title>Who am I, what is my business? </title> -<para ->My employer is Danka Deutschland GmbH, a leading and manufacturer-independent provider of professional and hi-speed digital printing systems, black-and-white as well as colour. Danka provides hardware, software, service, maintenance, consumables and customised solutions for the products in its portfolio. I work there as a System Engineer. Amongst the brands Danka offers are Heidelberg (formerly Kodak), Canon, &Hewlett-Packard;, Hitachi, Infotec and EfI.</para> +<para>My employer is Danka Deutschland GmbH, a leading and manufacturer-independent provider of professional and hi-speed digital printing systems, black-and-white as well as colour. Danka provides hardware, software, service, maintenance, consumables and customised solutions for the products in its portfolio. I work there as a System Engineer. Amongst the brands Danka offers are Heidelberg (formerly Kodak), Canon, &Hewlett-Packard;, Hitachi, Infotec and EfI.</para> -<para ->My acquaintance with &Linux; and the Free Software community is not too old. When I started to play around with &Linux; at the beginning of 1999, my deepest disappointment was the poor support for printing. True, I made all our machines spit out simplex prints -- but what about duplex? What about punching the output? How to make sorting work? Or stapling, cover sheets and all the other beautiful finishing options our engines offer to customers? No way -- at least for me as a non-geek!</para> +<para>My acquaintance with &Linux; and the Free Software community is not too old. When I started to play around with &Linux; at the beginning of 1999, my deepest disappointment was the poor support for printing. True, I made all our machines spit out simplex prints -- but what about duplex? What about punching the output? How to make sorting work? Or stapling, cover sheets and all the other beautiful finishing options our engines offer to customers? No way -- at least for me as a non-geek!</para> -<para ->I began a search on the Internet for a solution. Fortunately not much later, in May 1999, Mike Sweet, principal developer of &CUPS;, announced the first Beta release of this superb piece of printing software. After trying it briefly, I knew this was it!</para> +<para>I began a search on the Internet for a solution. Fortunately not much later, in May 1999, Mike Sweet, principal developer of &CUPS;, announced the first Beta release of this superb piece of printing software. After trying it briefly, I knew this was it!</para> -<para ->Next thing I attempted: to make &Linux; distributions interested in this new stuff. Believe me -- it was more than tenacious! They seemed to think they already had the best thing they could get in printing. One reason probably was that they (and many &Linux; developers) never had to think about how to best support a printer duplexer -- because one had never come near their own desks...</para> +<para>Next thing I attempted: to make &Linux; distributions interested in this new stuff. Believe me -- it was more than tenacious! They seemed to think they already had the best thing they could get in printing. One reason probably was that they (and many &Linux; developers) never had to think about how to best support a printer duplexer -- because one had never come near their own desks...</para> -<para ->Finally, my attempts to make some &Linux; print publications interested in &CUPS; <quote ->backfired</quote -> on me - one editor squeezed me into writing a series on the subject myself. And this is how some people started to give me the nickname <quote ->CUPS Evangelist</quote ->. I will not get rid of this nick anytime soon, now that even the &kde; people wedged me into their timeframe of releases. Oh, boy...</para> +<para>Finally, my attempts to make some &Linux; print publications interested in &CUPS; <quote>backfired</quote> on me - one editor squeezed me into writing a series on the subject myself. And this is how some people started to give me the nickname <quote>CUPS Evangelist</quote>. I will not get rid of this nick anytime soon, now that even the &kde; people wedged me into their timeframe of releases. Oh, boy...</para> -<para ->Anyway, &CUPS; is now making its way around the world and it might well become a triumphal one: I am a little bit proud to have supported and contributed to this from near the beginning.</para> +<para>Anyway, &CUPS; is now making its way around the world and it might well become a triumphal one: I am a little bit proud to have supported and contributed to this from near the beginning.</para> -<para ->It should encourage you: even if some more experienced &Linux; users than you are skeptical about it, and even if your programming skills are next to zero (like mine) - there are a lot of tasks and jobs and ideas, and talent that you can contribute to the Free Software community. Not least within the &kde; project... </para> +<para>It should encourage you: even if some more experienced &Linux; users than you are skeptical about it, and even if your programming skills are next to zero (like mine) - there are a lot of tasks and jobs and ideas, and talent that you can contribute to the Free Software community. Not least within the &kde; project... </para> </sect1> <sect1 id="credits"> -<title ->Credits</title> +<title>Credits</title> -<para ->I'd like to thank...</para> +<para>I'd like to thank...</para> <itemizedlist> <listitem> -<para ->Mike Sweet for developing &CUPS; in the first place</para> +<para>Mike Sweet for developing &CUPS; in the first place</para> </listitem> <listitem> -<para ->Jean-Eric Cuendet for starting <application ->kups</application -> and <application ->qtcups</application ->, the predecessors of &tdeprint;</para> +<para>Jean-Eric Cuendet for starting <application>kups</application> and <application>qtcups</application>, the predecessors of &tdeprint;</para> </listitem> <listitem> -<para ->Michael Goffioul for doing all the hard work recently</para> +<para>Michael Goffioul for doing all the hard work recently</para> </listitem> <listitem> -<para ->Martin Konold for thinking twice</para> +<para>Martin Konold for thinking twice</para> </listitem> <listitem> -<para ->Sven Guckes for teaching me a few things about the art of <quote ->survival on the terminal</quote -> (just in case &kde; is not there ;-) )</para> +<para>Sven Guckes for teaching me a few things about the art of <quote>survival on the terminal</quote> (just in case &kde; is not there ;-) )</para> </listitem> <listitem> -<para ->...too numerous others to mention who also let me snatch bits and bytes of knowledge off them</para> +<para>...too numerous others to mention who also let me snatch bits and bytes of knowledge off them</para> </listitem> <listitem> -<para ->and last, but not least: Tom Schwaller for encouraging me to get into <quote ->documentation writing</quote -></para> +<para>and last, but not least: Tom Schwaller for encouraging me to get into <quote>documentation writing</quote></para> </listitem> </itemizedlist> </sect1> <sect1 id="caveats"> -<title ->Caveats</title> +<title>Caveats</title> -<para ->&tdeprint; has been developed on a system using &CUPS; 1.1.6. &tdeprint; has been tested on other versions of &CUPS; and so far no incompatibilities are known. By the time of writing this Handbook, &CUPS; 1.1.9 is out with a few new features not yet supported by &tdeprint;. Of course you are able to access these features, but you will need to bypass &tdeprint; and use the &CUPS; command-line tools or edit configuration files manually. &tdeprint;'s development will go on and this Handbook strives to always be the best available user documentation resource for it.</para> +<para>&tdeprint; has been developed on a system using &CUPS; 1.1.6. &tdeprint; has been tested on other versions of &CUPS; and so far no incompatibilities are known. By the time of writing this Handbook, &CUPS; 1.1.9 is out with a few new features not yet supported by &tdeprint;. Of course you are able to access these features, but you will need to bypass &tdeprint; and use the &CUPS; command-line tools or edit configuration files manually. &tdeprint;'s development will go on and this Handbook strives to always be the best available user documentation resource for it.</para> </sect1> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/getting-started.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/getting-started.docbook index 481237028fa..ad6b8bfd8ff 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/getting-started.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/getting-started.docbook @@ -1,169 +1,80 @@ <chapter id="getting-started"> -<title ->Getting Started</title> +<title>Getting Started</title> -<para ->This chapter of the &tdeprint; Handbook will walk you through most of the configuration or selection options of &tdeprint;. It will mainly deal with &CUPS; in this version, as the author is most familiar with it, and also because &tdeprint; started off with supporting &CUPS; best. Later versions of the &tdeprint; software and editions of this handbook will support and explore other printing systems more closely.</para> +<para>This chapter of the &tdeprint; Handbook will walk you through most of the configuration or selection options of &tdeprint;. It will mainly deal with &CUPS; in this version, as the author is most familiar with it, and also because &tdeprint; started off with supporting &CUPS; best. Later versions of the &tdeprint; software and editions of this handbook will support and explore other printing systems more closely.</para> <sect1 id="selecting-your-print-subsystem"> -<title ->Selecting Your Print Subsystem</title> - -<para ->You need to define your print subsystem, before you are able to install any printer with the &tdeprint; framework. There are two areas where you can define this: either in &kcontrol; (The <guilabel ->Printing Manager</guilabel -> section), or directly and <quote ->on the fly</quote -> from the print dialogue.</para> - -<para ->Navigate to <menuchoice -><guimenu ->TDE Menu</guimenu -> <guisubmenu ->Preferences</guisubmenu -> <guisubmenu ->System</guisubmenu -> <guimenuitem ->Printing Manager</guimenuitem -></menuchoice ->. At the bottom you can see a button that lets you select which printing subsystem you want to use. In &kde; 2.2 you can choose from the following alternatives:</para> +<title>Selecting Your Print Subsystem</title> + +<para>You need to define your print subsystem, before you are able to install any printer with the &tdeprint; framework. There are two areas where you can define this: either in &kcontrol; (The <guilabel>Printing Manager</guilabel> section), or directly and <quote>on the fly</quote> from the print dialogue.</para> + +<para>Navigate to <menuchoice><guimenu>TDE Menu</guimenu> <guisubmenu>Preferences</guisubmenu> <guisubmenu>System</guisubmenu> <guimenuitem>Printing Manager</guimenuitem></menuchoice>. At the bottom you can see a button that lets you select which printing subsystem you want to use. In &kde; 2.2 you can choose from the following alternatives:</para> <itemizedlist> <listitem> -<para ->&CUPS; (Common &UNIX; Printing System)</para> +<para>&CUPS; (Common &UNIX; Printing System)</para> </listitem> <listitem> -<para ->Print through an external program (generic)</para> +<para>Print through an external program (generic)</para> </listitem> <listitem> -<para -><acronym ->LPR</acronym -> (Standard <acronym ->BSD</acronym -> Print System)</para> +<para><acronym>LPR</acronym> (Standard <acronym>BSD</acronym> Print System)</para> </listitem> <listitem> -<para ->Generic &UNIX; <acronym ->LPD</acronym -> print system (the default)</para> +<para>Generic &UNIX; <acronym>LPD</acronym> print system (the default)</para> </listitem> <listitem> -<para -><acronym ->RLPR</acronym -> environment (print to remote <acronym ->LPD</acronym -> servers from the command line)</para> +<para><acronym>RLPR</acronym> environment (print to remote <acronym>LPD</acronym> servers from the command line)</para> </listitem> </itemizedlist> -<para ->Of course, the chosen system must be installed, and up and running on your box prior to your selection, or before it takes effect. </para> +<para>Of course, the chosen system must be installed, and up and running on your box prior to your selection, or before it takes effect. </para> -<para ->On it's first startup, &tdeprint; will try an autodetection. This only works for:</para> +<para>On it's first startup, &tdeprint; will try an autodetection. This only works for:</para> <itemizedlist> <listitem> -<para ->&CUPS;, as it is checking first for a running &CUPS; daemon</para> +<para>&CUPS;, as it is checking first for a running &CUPS; daemon</para> </listitem> <listitem> -<para -><acronym ->LPD</acronym ->, as it is checking for a running <acronym ->LPD</acronym -> daemon, plus a <filename ->printcap</filename -> file.</para> +<para><acronym>LPD</acronym>, as it is checking for a running <acronym>LPD</acronym> daemon, plus a <filename>printcap</filename> file.</para> </listitem> </itemizedlist> <!-- <para> Go to System->XY->ABC. Now you can choose from the following alternatives: -</para ->--> +</para>--> -<para ->The system you choose must be installed on your system prior to your selection. The author's personal recommendation is &CUPS;.</para> +<para>The system you choose must be installed on your system prior to your selection. The author's personal recommendation is &CUPS;.</para> -<para ->Once autodetected, chosen, or changed, the active print subsystem will take effect for all &kde; applications. Different users may have different print subsystems in use, if those do exist on the computer and are compliant with each other. Their settings are stored in the <filename ->tdeprintrc</filename ->. This file is unique to every user, and is normally installed in <filename ->$<envar ->HOME</envar ->/.trinity/share/config/tdeprintrc</filename ->.</para> +<para>Once autodetected, chosen, or changed, the active print subsystem will take effect for all &kde; applications. Different users may have different print subsystems in use, if those do exist on the computer and are compliant with each other. Their settings are stored in the <filename>tdeprintrc</filename>. This file is unique to every user, and is normally installed in <filename>$<envar>HOME</envar>/.trinity/share/config/tdeprintrc</filename>.</para> <warning> -<para ->This file is not intended to be directly editable, and all available options can be set from the &tdeprint; &GUI;.</para> +<para>This file is not intended to be directly editable, and all available options can be set from the &tdeprint; &GUI;.</para> </warning> -<para ->You may even select a different printer subsystem, on the fly, from the &kprinter; dialogue box.</para> +<para>You may even select a different printer subsystem, on the fly, from the &kprinter; dialogue box.</para> </sect1> <sect1 id="working-with-printing-manger"> -<title ->Working with the Printing Manager</title> - -<para ->Once you have chosen your preferred and installed print subsystem, you are ready to investigate, configure administer and work with this system through the &tdeprint; framework.</para> - -<para ->Navigate to <menuchoice -><guimenu ->TDE Menu</guimenu -> <guisubmenu ->Preferences</guisubmenu -> <guisubmenu ->System</guisubmenu -> <guimenuitem ->Printing Manager</guimenuitem -></menuchoice ->. In the right part of the window you will see at least 4 printers predefined. These are the virtual or special purpose printers, explained in section . You will probably see a toolbar with 13 icons at the top of the window, and at least 4 tabs in the lower half of the window, labelled <guilabel ->Information</guilabel ->, <guilabel ->Jobs</guilabel ->, <guilabel ->Properties</guilabel -> and <guilabel ->Instances</guilabel ->.</para> +<title>Working with the Printing Manager</title> + +<para>Once you have chosen your preferred and installed print subsystem, you are ready to investigate, configure administer and work with this system through the &tdeprint; framework.</para> + +<para>Navigate to <menuchoice><guimenu>TDE Menu</guimenu> <guisubmenu>Preferences</guisubmenu> <guisubmenu>System</guisubmenu> <guimenuitem>Printing Manager</guimenuitem></menuchoice>. In the right part of the window you will see at least 4 printers predefined. These are the virtual or special purpose printers, explained in section . You will probably see a toolbar with 13 icons at the top of the window, and at least 4 tabs in the lower half of the window, labelled <guilabel>Information</guilabel>, <guilabel>Jobs</guilabel>, <guilabel>Properties</guilabel> and <guilabel>Instances</guilabel>.</para> <!-- Not needed: the default view is as described, this can be mentioned --> -<!-- elsewhere <para ->If you start the <guilabel ->Printing --> -<!-- Manager</guilabel -> module for the first time, you may be missing --> -<!-- Icons or tabs. <mousebutton ->Right</mousebutton ->-clicking the mouse --> +<!-- elsewhere <para>If you start the <guilabel>Printing --> +<!-- Manager</guilabel> module for the first time, you may be missing --> +<!-- Icons or tabs. <mousebutton>Right</mousebutton>-clicking the mouse --> <!-- on the white background of the right part of the window opens a --> <!-- Menu to select your viewing preferences. To get the same view as in --> -<!-- most screenshots, select: <guimenuitem ->View Toolbar</guimenuitem -> --> -<!-- and <guimenuitem ->View Printer Information</guimenuitem -> and --> -<!-- <guimenuitem ->View Icons</guimenuitem -> and <guimenuitem ->Orientation --> -<!-- Vertical</guimenuitem ->. Moving the mouse over one Button and --> +<!-- most screenshots, select: <guimenuitem>View Toolbar</guimenuitem> --> +<!-- and <guimenuitem>View Printer Information</guimenuitem> and --> +<!-- <guimenuitem>View Icons</guimenuitem> and <guimenuitem>Orientation --> +<!-- Vertical</guimenuitem>. Moving the mouse over one Button and --> <!-- waiting a second gives you a tooltip hint about its functions. --> <!-- diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/highlights.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/highlights.docbook index 9f2c2e1fae9..09c3ec3c6c4 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/highlights.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/highlights.docbook @@ -1,62 +1,28 @@ <chapter id="tdeprint-highlights"> -<title ->&tdeprint;'s Highlights</title> +<title>&tdeprint;'s Highlights</title> -<para ->The new &tdeprint; system includes more than one highlight. Having worked in an environment in the past that is not exactly sophisticated, as far as printing is concerned, take a look at some of the benefits that come with &tdeprint;</para> +<para>The new &tdeprint; system includes more than one highlight. Having worked in an environment in the past that is not exactly sophisticated, as far as printing is concerned, take a look at some of the benefits that come with &tdeprint;</para> <sect1 id="add-printer-wizard"> -<title ->The <quote ->Add Printer</quote -> Wizard</title> - -<para ->&tdeprint; has an <quote ->Add Printer Wizard</quote ->. The Add Printer Wizard helps you with adding and configuring a new printer. Of course, you may do this manually as well.</para> - -<para ->&tdeprint; helps you <quote ->discover</quote -> printers. It is able to scan the environment for available devices and queues. This works for network connections using <acronym ->TCP</acronym -> (AppSocket, <acronym ->aka</acronym -> &HP; <trademark class="registered" ->JetDirect</trademark ->, or <acronym ->IPP</acronym ->) or <acronym ->SMB</acronym ->/Samba (<quote ->shared</quote -> &Windows;) printers and partially for directly attached printers over parallel, serial, or <acronym ->USB</acronym -> connections.</para> +<title>The <quote>Add Printer</quote> Wizard</title> + +<para>&tdeprint; has an <quote>Add Printer Wizard</quote>. The Add Printer Wizard helps you with adding and configuring a new printer. Of course, you may do this manually as well.</para> + +<para>&tdeprint; helps you <quote>discover</quote> printers. It is able to scan the environment for available devices and queues. This works for network connections using <acronym>TCP</acronym> (AppSocket, <acronym>aka</acronym> &HP; <trademark class="registered">JetDirect</trademark>, or <acronym>IPP</acronym>) or <acronym>SMB</acronym>/Samba (<quote>shared</quote> &Windows;) printers and partially for directly attached printers over parallel, serial, or <acronym>USB</acronym> connections.</para> <screenshot> -<screeninfo ->A screenshot of the new <quote ->Add Printer Wizard</quote -></screeninfo> +<screeninfo>A screenshot of the new <quote>Add Printer Wizard</quote></screeninfo> <mediaobject> <imageobject> <imagedata fileref="cupsaddprinterwizard1.png" format="PNG"/> </imageobject> <textobject> -<phrase ->Here's a screenshot of the <quote ->Add Printer Wizard</quote -> (this one is not very exciting yet; but...)</phrase> +<phrase>Here's a screenshot of the <quote>Add Printer Wizard</quote> (this one is not very exciting yet; but...)</phrase> </textobject> </mediaobject> </screenshot> -<para ->The wizard makes the installation and handling of the drivers <quote ->a snap</quote ->. Selecting, configuring and testing should be easy as never before on any &Linux;-like system.</para> +<para>The wizard makes the installation and handling of the drivers <quote>a snap</quote>. Selecting, configuring and testing should be easy as never before on any &Linux;-like system.</para> <!-- LW: needs some info where to find it, or a pointer to where in this --> <!-- doc that is covered --> @@ -64,82 +30,49 @@ </sect1> <sect1 id="print-job-control"> -<title ->Full Print Job Control</title> +<title>Full Print Job Control</title> -<para ->The Print Job Viewer is automatically started by &kprinter;. It may be docked into the &kde; panel (in the system tray). The Print Job Viewer allows full job management, if supported by the print subsystem.</para> +<para>The Print Job Viewer is automatically started by &kprinter;. It may be docked into the &kde; panel (in the system tray). The Print Job Viewer allows full job management, if supported by the print subsystem.</para> -<para ->You can:</para> +<para>You can:</para> <itemizedlist> <listitem> -<para ->Hold and release jobs,</para> +<para>Hold and release jobs,</para> </listitem> <listitem> -<para ->Move pending jobs to another printer,</para> +<para>Move pending jobs to another printer,</para> </listitem> <listitem> -<para ->Cancel pending or processing jobs.</para> +<para>Cancel pending or processing jobs.</para> </listitem> </itemizedlist> -<para ->A screenshot of the &tdeprint; PrintJob Viewer shows the information you get: Job-ID, target printer, job name, job owner, job status and job size. In the next &tdeprint; release you will also see information about the number of pages (as &CUPS; calculates it; see chapter on page accounting for more information about its merits and limitations).</para> +<para>A screenshot of the &tdeprint; PrintJob Viewer shows the information you get: Job-ID, target printer, job name, job owner, job status and job size. In the next &tdeprint; release you will also see information about the number of pages (as &CUPS; calculates it; see chapter on page accounting for more information about its merits and limitations).</para> <screenshot> -<screeninfo ->A screenshot of the &tdeprint; PrintJob Viewer</screeninfo> +<screeninfo>A screenshot of the &tdeprint; PrintJob Viewer</screeninfo> <mediaobject> <imageobject> <imagedata fileref="tdeprint-jobviewer.png" format="PNG"/> </imageobject> <textobject> -<phrase ->Here's a screenshot of the &tdeprint; PrintJob Viewer.</phrase> +<phrase>Here's a screenshot of the &tdeprint; PrintJob Viewer.</phrase> </textobject> -<caption -><para ->A screenshot of the &tdeprint; PrintJob Viewer.</para -></caption> +<caption><para>A screenshot of the &tdeprint; PrintJob Viewer.</para></caption> </mediaobject> </screenshot> -<para ->An alternative way to looking at the same information (and having the same amount of control is through the <inlinemediaobject -><imageobject -> <imagedata fileref="kcontrol-icon.png" format="PNG"/></imageobject -> </inlinemediaobject -> &kcontrolcenter; selecting <menuchoice -><guilabel ->System</guilabel -><guilabel ->Printing Manager</guilabel -></menuchoice ->. If you don't see the <guilabel ->Printer Information</guilabel ->, <mousebutton ->right</mousebutton -> click on the window background and select <guilabel ->View Printer Information</guilabel ->. Then go to the <guilabel ->Jobs</guilabel -> tab to see this:</para> +<para>An alternative way to looking at the same information (and having the same amount of control is through the <inlinemediaobject><imageobject> <imagedata fileref="kcontrol-icon.png" format="PNG"/></imageobject> </inlinemediaobject> &kcontrolcenter; selecting <menuchoice><guilabel>System</guilabel><guilabel>Printing Manager</guilabel></menuchoice>. If you don't see the <guilabel>Printer Information</guilabel>, <mousebutton>right</mousebutton> click on the window background and select <guilabel>View Printer Information</guilabel>. Then go to the <guilabel>Jobs</guilabel> tab to see this:</para> <screenshot> -<screeninfo -></screeninfo> +<screeninfo></screeninfo> <mediaobject> <imageobject> <imagedata fileref="kcontrolcenter-printmanager-jobcontrol-2.png" format="PNG"/> </imageobject> <textobject> -<phrase ->Here's a screenshot of the &tdeprint; PrintJob Viewer.</phrase> +<phrase>Here's a screenshot of the &tdeprint; PrintJob Viewer.</phrase> </textobject> </mediaobject> </screenshot> @@ -147,269 +80,140 @@ </sect1> <sect1 id="modules-for-different-subsystems"> -<title ->Modules for different print subsystems</title> +<title>Modules for different print subsystems</title> -<para ->&tdeprint; uses different modules to realise the interface to the possible print subsystems. Not all the modules are yet developed fully, but you will have basic printing functionality with:</para> +<para>&tdeprint; uses different modules to realise the interface to the possible print subsystems. Not all the modules are yet developed fully, but you will have basic printing functionality with:</para> <itemizedlist> <listitem> -<para -><acronym ->LPD</acronym -> (<acronym ->BSD</acronym -> style)</para> +<para><acronym>LPD</acronym> (<acronym>BSD</acronym> style)</para> </listitem> <listitem> -<para -><acronym ->LPRng</acronym -> (&RedHat;, if you just use it's <acronym ->BSD</acronym -> style subset),</para> +<para><acronym>LPRng</acronym> (&RedHat;, if you just use it's <acronym>BSD</acronym> style subset),</para> </listitem> <listitem> -<para -><acronym ->RLPR</acronym -> (a command-line <acronym ->LPR</acronym -> utility, which doesn't need a <filename ->printcap</filename -> file.</para> +<para><acronym>RLPR</acronym> (a command-line <acronym>LPR</acronym> utility, which doesn't need a <filename>printcap</filename> file.</para> </listitem> <listitem> -<para -><quote ->external</quote -> print commands (&Netscape; like).</para> +<para><quote>external</quote> print commands (&Netscape; like).</para> </listitem> </itemizedlist> -<para ->Most importantly, full support for &CUPS; is already there. Modules for other print subsystems, such as <acronym ->PLP</acronym ->, <acronym ->PPR</acronym -> and <acronym ->PDQ</acronym -> may be available later.</para> +<para>Most importantly, full support for &CUPS; is already there. Modules for other print subsystems, such as <acronym>PLP</acronym>, <acronym>PPR</acronym> and <acronym>PDQ</acronym> may be available later.</para> -<para ->&tdeprint; makes &kde; much more flexible. It gives freedom of choice to &kde; 2.2 users. To use different available print subsystems, these must, of course, be installed independently from &kde;. In former versions, users were stuck with the old <acronym ->LPD</acronym -> style print subsystems. Now they can even use &CUPS;. In the future, there will be easy integration of new subsystems, as they appear on the scene.</para> +<para>&tdeprint; makes &kde; much more flexible. It gives freedom of choice to &kde; 2.2 users. To use different available print subsystems, these must, of course, be installed independently from &kde;. In former versions, users were stuck with the old <acronym>LPD</acronym> style print subsystems. Now they can even use &CUPS;. In the future, there will be easy integration of new subsystems, as they appear on the scene.</para> </sect1> <sect1 id="tdeprint-goodies"> -<title ->More &tdeprint; <quote ->Goodies</quote -></title> -<subtitle ->Benefitting all Print SubSystems.</subtitle> - -<para ->Some specific features of &tdeprint; depend on the chosen print subsystem. This dependency might exist because those features are only implemented there; remember, &tdeprint; is an intermediate layer between &kde; applications, and the print subsystem, but it's no replacement for any print subsystem by itself. Such dependency may exist for another reason: that &tdeprint; has not yet implemented an interface to all the features of all the subsystems.</para> - -<para ->Other features include benefits from &tdeprint; that are independent of the chosen print subsystem, and are available with all of them. At present there are <quote ->special</quote -> or <quote ->virtual</quote -> printers, and some generic <quote ->pre-filters</quote ->.</para> +<title>More &tdeprint; <quote>Goodies</quote></title> +<subtitle>Benefitting all Print SubSystems.</subtitle> + +<para>Some specific features of &tdeprint; depend on the chosen print subsystem. This dependency might exist because those features are only implemented there; remember, &tdeprint; is an intermediate layer between &kde; applications, and the print subsystem, but it's no replacement for any print subsystem by itself. Such dependency may exist for another reason: that &tdeprint; has not yet implemented an interface to all the features of all the subsystems.</para> + +<para>Other features include benefits from &tdeprint; that are independent of the chosen print subsystem, and are available with all of them. At present there are <quote>special</quote> or <quote>virtual</quote> printers, and some generic <quote>pre-filters</quote>.</para> <variablelist> <varlistentry> -<term -><guilabel ->Print Preview</guilabel -></term> +<term><guilabel>Print Preview</guilabel></term> <listitem> -<para ->From the Print Dialogue, you can select to look at a preview. For this, the print file is passed through filters which make it suitable for displaying on screen using &kghostview;.</para> +<para>From the Print Dialogue, you can select to look at a preview. For this, the print file is passed through filters which make it suitable for displaying on screen using &kghostview;.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Special Printers</guilabel -></term> +<term><guilabel>Special Printers</guilabel></term> <listitem> -<para ->Amongst these additional &tdeprint; features are a few <quote ->special</quote -> or <quote ->virtual</quote -> printers:</para> +<para>Amongst these additional &tdeprint; features are a few <quote>special</quote> or <quote>virtual</quote> printers:</para> -<para ->These special printers may:</para> +<para>These special printers may:</para> <variablelist> <varlistentry> -<term -><guilabel ->Print to PDF</guilabel -></term> +<term><guilabel>Print to PDF</guilabel></term> <listitem> -<para ->Convert your document into a <acronym ->PDF</acronym -> file with the help of an external program.</para> +<para>Convert your document into a <acronym>PDF</acronym> file with the help of an external program.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Print to email</guilabel -></term> +<term><guilabel>Print to email</guilabel></term> <listitem> -<para ->Send your document as an email attached <acronym ->PDF</acronym -> file.</para> +<para>Send your document as an email attached <acronym>PDF</acronym> file.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Print to PS file</guilabel -></term> +<term><guilabel>Print to PS file</guilabel></term> <listitem> -<para ->Save your document as a &PostScript; file.</para> +<para>Save your document as a &PostScript; file.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Print to Fax</guilabel -></term> +<term><guilabel>Print to Fax</guilabel></term> <listitem> -<para ->Send it through an available backend, such as <application ->Hylafax</application -> as a fax.</para> +<para>Send it through an available backend, such as <application>Hylafax</application> as a fax.</para> </listitem> </varlistentry> </variablelist> -<para ->These <quote ->special</quote -> printers appear in the user print dialogue just like <quote ->normal</quote -> printers. They are entirely configurable on a per-user basis.</para> +<para>These <quote>special</quote> printers appear in the user print dialogue just like <quote>normal</quote> printers. They are entirely configurable on a per-user basis.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Generic Pre-Filtering</guilabel -></term> +<term><guilabel>Generic Pre-Filtering</guilabel></term> <listitem> -<para ->&tdeprint; provides you with a framework to define and configure your own <quote ->pre-filters</quote ->. These pre-filters may take effect <emphasis ->before</emphasis -> they are passed to your print subsystem for further processing, but <emphasis ->after</emphasis -> the (&PostScript;, plain text or other) print files have been generated by your application.</para> - -<para ->There are a few useful filters already predefined. These are:</para> +<para>&tdeprint; provides you with a framework to define and configure your own <quote>pre-filters</quote>. These pre-filters may take effect <emphasis>before</emphasis> they are passed to your print subsystem for further processing, but <emphasis>after</emphasis> the (&PostScript;, plain text or other) print files have been generated by your application.</para> + +<para>There are a few useful filters already predefined. These are:</para> <itemizedlist> <listitem> -<para ->The <quote ->multiple pages per sheet</quote -> filter,</para> +<para>The <quote>multiple pages per sheet</quote> filter,</para> </listitem> <listitem> -<para ->the <quote ->enscript</quote -> text filter,</para> +<para>the <quote>enscript</quote> text filter,</para> </listitem> <listitem> -<para ->and three filters to help print pamphlets.</para> +<para>and three filters to help print pamphlets.</para> </listitem> </itemizedlist> -<para ->You may create your own filters based on any third party program that is able to process &PostScript;, plain text or image files, and output any one of those formats.</para> +<para>You may create your own filters based on any third party program that is able to process &PostScript;, plain text or image files, and output any one of those formats.</para> -<para ->These filters are configured through <acronym ->XML</acronym -> files. This makes an extension of the concept very easy for experienced developers, but end-user configuration is also done through an intuitive graphical user interface. So, fear not, you don't need to learn <acronym ->XML</acronym -> because of &tdeprint;!</para> +<para>These filters are configured through <acronym>XML</acronym> files. This makes an extension of the concept very easy for experienced developers, but end-user configuration is also done through an intuitive graphical user interface. So, fear not, you don't need to learn <acronym>XML</acronym> because of &tdeprint;!</para> <variablelist> <varlistentry> -<term -><guilabel ->Multiple Pages Per Sheet Filter</guilabel -></term> +<term><guilabel>Multiple Pages Per Sheet Filter</guilabel></term> <listitem> -<para ->This is a predefined filter that installs with &tdeprint;. It allows you to create a modified &PostScript; output, from &PostScript; input, that prints 1, 2, or 4 logical pages on a single sheet of paper.</para> +<para>This is a predefined filter that installs with &tdeprint;. It allows you to create a modified &PostScript; output, from &PostScript; input, that prints 1, 2, or 4 logical pages on a single sheet of paper.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Enscript Text Filter</guilabel -></term> +<term><guilabel>Enscript Text Filter</guilabel></term> <listitem> -<para ->This is a predefined filter that installs with &tdeprint;. It allows you to create &PostScript; output from any text file input, that includes syntax highlighting for program listings, pretty-printing, and nice configurable page frames and headers.</para> +<para>This is a predefined filter that installs with &tdeprint;. It allows you to create &PostScript; output from any text file input, that includes syntax highlighting for program listings, pretty-printing, and nice configurable page frames and headers.</para> </listitem> </varlistentry> <varlistentry> -<term -><guilabel ->Pamphlet Printing Filters</guilabel -></term> +<term><guilabel>Pamphlet Printing Filters</guilabel></term> <listitem> -<para ->If your printer is able to produce duplex output, using either one-pass or two-pass technology, you may be able to use one, or a combination, of the <quote ->pamphlet</quote -> filters.</para> - -<para ->For duplexing printers, make sure you use the duplex option that <quote ->turns</quote -> the output along the short paper edge. Folding the printed paper along the middle turns your document into a nice pamphlet.</para> - -<para ->If you are stuck with using a simplex-only device, you can do the same, using two different filters and a few additional steps.</para> - -<para ->Depending on your model, first use the filter for printing the <quote ->odd</quote -> pages, then insert the paper in the correct order back into the paper tray to get the even pages printed on the reverse side. These can then be folded to make a pamphlet.</para> +<para>If your printer is able to produce duplex output, using either one-pass or two-pass technology, you may be able to use one, or a combination, of the <quote>pamphlet</quote> filters.</para> + +<para>For duplexing printers, make sure you use the duplex option that <quote>turns</quote> the output along the short paper edge. Folding the printed paper along the middle turns your document into a nice pamphlet.</para> + +<para>If you are stuck with using a simplex-only device, you can do the same, using two different filters and a few additional steps.</para> + +<para>Depending on your model, first use the filter for printing the <quote>odd</quote> pages, then insert the paper in the correct order back into the paper tray to get the even pages printed on the reverse side. These can then be folded to make a pamphlet.</para> </listitem> </varlistentry> @@ -420,276 +224,101 @@ </variablelist> </sect1> <sect1 id="cups-plugin"> -<title ->&CUPS; Support: the Most Important Module in &tdeprint;</title> - -<para ->&tdeprint; contains a module for &CUPS;. &CUPS;, the <quote ->Common &UNIX; Printing System</quote -> (<ulink url="http://www.cups.org" ->http://www.cups.org/</ulink ->), is the most advanced, powerful and flexible of all print subsystems on &UNIX; and other &UNIX;-like operating systems. It is still quite new on the horizon, but is based on <acronym ->IPP</acronym ->, the Internet Printing Protocol, the newly emerging standard for the future of network printing. &CUPS; is clearly the print system of choice for Michael Goffioul, the principal &tdeprint; developer.</para> - -<para ->Experienced &kde; users may already be familiar with Michael's utilities <application ->qtcups</application -> and <application ->kups</application -> (co-developed with Jean-Eric Cuendet). These were, up until now, the graphical &GUI; front ends for &CUPS; with a strong relation to &kde;.</para> +<title>&CUPS; Support: the Most Important Module in &tdeprint;</title> + +<para>&tdeprint; contains a module for &CUPS;. &CUPS;, the <quote>Common &UNIX; Printing System</quote> (<ulink url="http://www.cups.org">http://www.cups.org/</ulink>), is the most advanced, powerful and flexible of all print subsystems on &UNIX; and other &UNIX;-like operating systems. It is still quite new on the horizon, but is based on <acronym>IPP</acronym>, the Internet Printing Protocol, the newly emerging standard for the future of network printing. &CUPS; is clearly the print system of choice for Michael Goffioul, the principal &tdeprint; developer.</para> + +<para>Experienced &kde; users may already be familiar with Michael's utilities <application>qtcups</application> and <application>kups</application> (co-developed with Jean-Eric Cuendet). These were, up until now, the graphical &GUI; front ends for &CUPS; with a strong relation to &kde;.</para> <sect2> -<title -><application ->qtcups</application -> and <application ->kups</application -> — The Predecessors</title> - -<para ->Both utilities are probably still widely used. For those not familiar with them, here are brief explanations.</para> - -<para -><application ->qtcups</application -> was a graphical front end for the <command ->lp</command -> or <command ->lpr</command -> print commands as installed by &CUPS;. Using <application ->qtcups</application -> opened a dialogue. This dialogue let you comfortably select your printer and the print job options. <application ->qtcups</application -> worked from the command line, or from within applications, when the application in question had a configurable print command.</para> - -<para -><application ->kups</application -> was a graphical wrapper to do the administration tasks for your &CUPS; server, and the &CUPS; daemon at the heart of it. You could add, delete, modify, configure, start, and stop printers. You could cancel, delete, move, stop and restart print jobs, and you could change the settings of the daemon, start, stop, and restart it.</para> +<title><application>qtcups</application> and <application>kups</application> — The Predecessors</title> + +<para>Both utilities are probably still widely used. For those not familiar with them, here are brief explanations.</para> + +<para><application>qtcups</application> was a graphical front end for the <command>lp</command> or <command>lpr</command> print commands as installed by &CUPS;. Using <application>qtcups</application> opened a dialogue. This dialogue let you comfortably select your printer and the print job options. <application>qtcups</application> worked from the command line, or from within applications, when the application in question had a configurable print command.</para> + +<para><application>kups</application> was a graphical wrapper to do the administration tasks for your &CUPS; server, and the &CUPS; daemon at the heart of it. You could add, delete, modify, configure, start, and stop printers. You could cancel, delete, move, stop and restart print jobs, and you could change the settings of the daemon, start, stop, and restart it.</para> </sect2> <sect2> -<title ->&tdeprint; — The Heir</title> - -<para ->The &CUPS; Module in &tdeprint; now contains all (and more) functions that were provided by <application ->qtcups</application -> and <application ->kups</application -> in former &kde; versions.</para> - -<para ->Instead of <command ->qtcups</command -> you can now use the <command ->kprinter</command -> command. And in place of <command ->kups</command -> you will probably use <command ->tdecmshell printmgr</command -> from now on. </para> - -<para ->The &tdeprint; module for &CUPS; also lets you fully administer the print subsystem, just like <application ->kups</application -> did before. It can start, stop and configure your &CUPS; daemon. It can also start, stop, add and delete <quote ->printers</quote -> (&ie; printer queues) and printer <quote ->instances</quote ->. Printer instances are printer queues that point to the same physical output device but with a different default setting of print options.</para> +<title>&tdeprint; — The Heir</title> + +<para>The &CUPS; Module in &tdeprint; now contains all (and more) functions that were provided by <application>qtcups</application> and <application>kups</application> in former &kde; versions.</para> + +<para>Instead of <command>qtcups</command> you can now use the <command>kprinter</command> command. And in place of <command>kups</command> you will probably use <command>tdecmshell printmgr</command> from now on. </para> + +<para>The &tdeprint; module for &CUPS; also lets you fully administer the print subsystem, just like <application>kups</application> did before. It can start, stop and configure your &CUPS; daemon. It can also start, stop, add and delete <quote>printers</quote> (&ie; printer queues) and printer <quote>instances</quote>. Printer instances are printer queues that point to the same physical output device but with a different default setting of print options.</para> </sect2> <sect2> -<title ->&kprinter; — Graphical Print Command</title> - -<para ->&tdeprint;'s &CUPS; module gives you access to a <quote ->graphical print command</quote ->, like <application ->qtcups</application -> did before.</para> - -<para ->Use &kprinter; in any application, even a non-&kde; application, that lets you configure your print command. Examples of these are &Netscape; and <application ->StarOffice</application ->, but <emphasis ->not</emphasis -> most pre-&kde; 2.2 programs.</para> - -<para ->A screenshot how to use the new <command ->kprinter</command -> print command instead of the old-fashioned <command ->lpr</command ->... Of course you need to have <command ->kprinter</command -> in your $<envar ->PATH</envar ->, or give the full path in the dialogue; ⪚ <userinput -><filename ->/opt/kde/bin/kprinter</filename -></userinput ->. &Netscape; will remember this and with further print jobs you will get the <command ->kprinter</command -> dialogue to configure your printouts.</para> +<title>&kprinter; — Graphical Print Command</title> + +<para>&tdeprint;'s &CUPS; module gives you access to a <quote>graphical print command</quote>, like <application>qtcups</application> did before.</para> + +<para>Use &kprinter; in any application, even a non-&kde; application, that lets you configure your print command. Examples of these are &Netscape; and <application>StarOffice</application>, but <emphasis>not</emphasis> most pre-&kde; 2.2 programs.</para> + +<para>A screenshot how to use the new <command>kprinter</command> print command instead of the old-fashioned <command>lpr</command>... Of course you need to have <command>kprinter</command> in your $<envar>PATH</envar>, or give the full path in the dialogue; ⪚ <userinput><filename>/opt/kde/bin/kprinter</filename></userinput>. &Netscape; will remember this and with further print jobs you will get the <command>kprinter</command> dialogue to configure your printouts.</para> <screenshot> -<screeninfo ->A screenshot of the <command ->kprinter</command -> print command in action.</screeninfo> +<screeninfo>A screenshot of the <command>kprinter</command> print command in action.</screeninfo> <mediaobject> <imageobject> <imagedata fileref="kprinter-as-netscape-printcommand.png" format="PNG"/> </imageobject> <textobject> -<phrase ->Here's a screenshot showing how to use the new <command ->kprinter</command -> print command instead of the old-fashioned <command ->lp</command -> or <command ->lpr</command -> in &Netscape;.</phrase> +<phrase>Here's a screenshot showing how to use the new <command>kprinter</command> print command instead of the old-fashioned <command>lp</command> or <command>lpr</command> in &Netscape;.</phrase> </textobject> </mediaobject> </screenshot> -<para ->You can also use <command ->&kprinter;</command -> from the command line and see the resulting dialogue box pop up:</para> +<para>You can also use <command>&kprinter;</command> from the command line and see the resulting dialogue box pop up:</para> <screenshot> -<screeninfo ->Screenshot of the <command ->kprinter</command -> command</screeninfo> +<screeninfo>Screenshot of the <command>kprinter</command> command</screeninfo> <mediaobject> <imageobject> <imagedata fileref="kprinter.png" format="PNG"/></imageobject> <textobject> -<phrase ->Screenshot showing use of the <command ->kprinter</command -> command from the command line.</phrase -></textobject> +<phrase>Screenshot showing use of the <command>kprinter</command> command from the command line.</phrase></textobject> </mediaobject> </screenshot> -<note -><para ->Just make sure you give at least the file to be printed from the command line as well: <userinput -><command ->kprinter</command -> <option ->/usr/share/doc/packages/cups/sam.pdf</option -></userinput ->. This will hand over the &CUPS; Software Administrator Manual to the <command ->kprinter</command -> dialogue, which will then pop up with the default printer pre-selected.</para> - -<para ->To pre-select a specific printer from the command line, use the <option ->-d</option -> option, ⪚: <userinput -><command ->kprinter</command -> <option ->-d DANKAcolorC2000</option -> <option ->/home/kurt/linuxtag2001-paper.ps</option -></userinput ->. You can still de-select the printer <option ->DANKAcolorC2000</option -> and choose a different one.</para> - -<para ->You <emphasis ->cannot</emphasis -> however call <userinput -><command ->kprinter</command -></userinput -> without a print file and hope to open a file selection dialogue box from the &kprinter; window. This is a feature that will be implemented only in the next version.</para> +<note><para>Just make sure you give at least the file to be printed from the command line as well: <userinput><command>kprinter</command> <option>/usr/share/doc/packages/cups/sam.pdf</option></userinput>. This will hand over the &CUPS; Software Administrator Manual to the <command>kprinter</command> dialogue, which will then pop up with the default printer pre-selected.</para> + +<para>To pre-select a specific printer from the command line, use the <option>-d</option> option, ⪚: <userinput><command>kprinter</command> <option>-d DANKAcolorC2000</option> <option>/home/kurt/linuxtag2001-paper.ps</option></userinput>. You can still de-select the printer <option>DANKAcolorC2000</option> and choose a different one.</para> + +<para>You <emphasis>cannot</emphasis> however call <userinput><command>kprinter</command></userinput> without a print file and hope to open a file selection dialogue box from the &kprinter; window. This is a feature that will be implemented only in the next version.</para> </note> -<para ->Using <command ->kprinter</command -> you are able to <quote ->ring all the bells and blow all the whistles</quote -> of your printer. You will need a device-specific so-called &PPD; (&PostScript; Printer Description) to enable &CUPS; to make this nice tandem team do this for you. Read more about this in <xref linkend="ppd-files"/>.</para> +<para>Using <command>kprinter</command> you are able to <quote>ring all the bells and blow all the whistles</quote> of your printer. You will need a device-specific so-called &PPD; (&PostScript; Printer Description) to enable &CUPS; to make this nice tandem team do this for you. Read more about this in <xref linkend="ppd-files"/>.</para> </sect2> </sect1> <sect1 id="future-plans"> -<title ->Plans for Future Development</title> - -<para ->What you have now is the first, already very feature-rich version of &tdeprint;. This version is, of course, fully usable for printing. You might even think that <quote ->it was never so easy</quote -> (not even back in the days when you had to use &Microsoft; &Windows;).</para> - -<para ->In the future, &tdeprint; will become even better. It will do a better job of <quote ->detecting</quote -> your installed print subsystem itself. Already &tdeprint; is doing quite well in automatically sensing if you have &CUPS; on your system. But in many cases you will have to tell &tdeprint; what you are using, if you want to keep a legacy print system.</para> - -<para ->The most important improvement in the near future will be a completion of the <application ->LPRng</application -> plugin. This at present is still very basic. It is restricted to the pure classical <acronym ->LPD</acronym -> part of <application ->LPRng</application ->.</para> - -<para ->Also, you may be able to add printers directly from the print dialogue to your system <quote ->just in time</quote ->, without going to &kcontrol; first.</para> - -<para ->Some smaller improvements already planned are:</para> +<title>Plans for Future Development</title> + +<para>What you have now is the first, already very feature-rich version of &tdeprint;. This version is, of course, fully usable for printing. You might even think that <quote>it was never so easy</quote> (not even back in the days when you had to use &Microsoft; &Windows;).</para> + +<para>In the future, &tdeprint; will become even better. It will do a better job of <quote>detecting</quote> your installed print subsystem itself. Already &tdeprint; is doing quite well in automatically sensing if you have &CUPS; on your system. But in many cases you will have to tell &tdeprint; what you are using, if you want to keep a legacy print system.</para> + +<para>The most important improvement in the near future will be a completion of the <application>LPRng</application> plugin. This at present is still very basic. It is restricted to the pure classical <acronym>LPD</acronym> part of <application>LPRng</application>.</para> + +<para>Also, you may be able to add printers directly from the print dialogue to your system <quote>just in time</quote>, without going to &kcontrol; first.</para> + +<para>Some smaller improvements already planned are:</para> <itemizedlist> -<listitem -><para ->add a file selection dialogue from the &kprinter; window to allow combining of additional files to the present printjob</para -></listitem -> <listitem -><para ->add a <quote ->history</quote -> button to the <application ->KJobViewer</application -> window and also a column to show the number of pages &CUPS; calculates for the job.</para -></listitem> +<listitem><para>add a file selection dialogue from the &kprinter; window to allow combining of additional files to the present printjob</para></listitem> <listitem><para>add a <quote>history</quote> button to the <application>KJobViewer</application> window and also a column to show the number of pages &CUPS; calculates for the job.</para></listitem> </itemizedlist> -<para ->Finally, there will be an <quote ->IO slave</quote -> that will give you access to your print subsystem, via &konqueror; for example. With this you will soon be able to browse your print subsystem from &konqueror; through a &URL; like shortcut such as <userinput ->print://printers/printername</userinput ->. A KPart will add a virtual folder to the services section of the &konqueror; navigation panel, giving a nice integrated way to browse and manage your print system via the &URL; <userinput ->print:/manager</userinput ->.</para> - -<para ->Please contact Michael Goffioul at <email ->tdeprint@swing.be</email -> with any further user or developer suggestions.</para> +<para>Finally, there will be an <quote>IO slave</quote> that will give you access to your print subsystem, via &konqueror; for example. With this you will soon be able to browse your print subsystem from &konqueror; through a &URL; like shortcut such as <userinput>print://printers/printername</userinput>. A KPart will add a virtual folder to the services section of the &konqueror; navigation panel, giving a nice integrated way to browse and manage your print system via the &URL; <userinput>print:/manager</userinput>.</para> + +<para>Please contact Michael Goffioul at <email>tdeprint@swing.be</email> with any further user or developer suggestions.</para> </sect1> </chapter> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/index.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/index.docbook index 47edbac8971..f511c1833f7 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/index.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/index.docbook @@ -1,24 +1,12 @@ <?xml version="1.0" ?> <!DOCTYPE book PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" "dtd/kdex.dtd" [ - <!ENTITY tdeprint "<application ->TDEPrint</application ->"> - <!ENTITY kprinter "<command ->kprinter</command ->"> - <!ENTITY CUPS "<acronym ->CUPS</acronym ->"> - <!ENTITY PPD "<acronym ->PPD</acronym ->"> - <!ENTITY IPP "<acronym ->IPP</acronym ->"> - <!ENTITY ghostscript "<application ->ghostscript</application ->"> + <!ENTITY tdeprint "<application>TDEPrint</application>"> + <!ENTITY kprinter "<command>kprinter</command>"> + <!ENTITY CUPS "<acronym>CUPS</acronym>"> + <!ENTITY PPD "<acronym>PPD</acronym>"> + <!ENTITY IPP "<acronym>IPP</acronym>"> + <!ENTITY ghostscript "<application>ghostscript</application>"> <!ENTITY tech-overview-doc SYSTEM "tech-overview.docbook"> <!ENTITY highlights-doc SYSTEM "highlights.docbook"> <!ENTITY getting-started-doc SYSTEM "getting-started.docbook"> @@ -34,172 +22,90 @@ <!ENTITY external-command-doc SYSTEM "external-command.docbook"> <!ENTITY extensions-doc SYSTEM "extensions.docbook"> <!ENTITY final-word-doc SYSTEM "final-word.docbook"> - <!ENTITY kappname "&tdeprint;" -><!-- replace kapp here --> + <!ENTITY kappname "&tdeprint;"><!-- replace kapp here --> <!ENTITY % addindex "IGNORE"> - <!ENTITY % British-English "INCLUDE" -><!-- change language only here --> + <!ENTITY % British-English "INCLUDE"><!-- change language only here --> ]> <book lang="&language;"> <bookinfo> -<title ->The &tdeprint; Handbook</title> +<title>The &tdeprint; Handbook</title> <authorgroup> -<author -><firstname ->Kurt</firstname -> <surname ->Pfeifle</surname -> <affiliation -> <address -><email ->kpfeifle@danka.de</email -></address> +<author><firstname>Kurt</firstname> <surname>Pfeifle</surname> <affiliation> <address><email>kpfeifle@danka.de</email></address> </affiliation> </author> -<othercredit role="developer" -><firstname ->Michael</firstname -> <surname ->Goffioul</surname -> <affiliation -> <address -><email ->tdeprint@swing.be</email -></address> +<othercredit role="developer"><firstname>Michael</firstname> <surname>Goffioul</surname> <affiliation> <address><email>tdeprint@swing.be</email></address> </affiliation> -<contrib ->Developer</contrib> +<contrib>Developer</contrib> </othercredit> -<othercredit role="reviewer" -><firstname ->Lauri</firstname -> <surname ->Watts</surname -> <affiliation -> <address -><email ->lauri@kde.org</email -></address> +<othercredit role="reviewer"><firstname>Lauri</firstname> <surname>Watts</surname> <affiliation> <address><email>lauri@kde.org</email></address> </affiliation> -<contrib ->Reviewer</contrib> +<contrib>Reviewer</contrib> </othercredit> -<othercredit role="translator" -><firstname ->Malcolm</firstname -><surname ->Hunter</surname -><affiliation -><address -><email ->malcolm.hunter@gmx.co.uk</email -></address -></affiliation -><contrib ->Conversion to British English</contrib -></othercredit -> +<othercredit role="translator"><firstname>Malcolm</firstname><surname>Hunter</surname><affiliation><address><email>malcolm.hunter@gmx.co.uk</email></address></affiliation><contrib>Conversion to British English</contrib></othercredit> </authorgroup> <copyright> -<year ->2001</year> -<holder ->Kurt Pfeifle</holder> +<year>2001</year> +<holder>Kurt Pfeifle</holder> </copyright> -<legalnotice ->&FDLNotice;</legalnotice> +<legalnotice>&FDLNotice;</legalnotice> -<date ->2001-08-09</date> -<releaseinfo ->1.00.04</releaseinfo> +<date>2001-08-09</date> +<releaseinfo>1.00.04</releaseinfo> <abstract> -<para ->This handbook describes &tdeprint;. &tdeprint; is not a standalone program. It is the new printing framework for &kde; 2.2. &tdeprint; is an intermediate layer between &kde; (or other) applications and the selected (and installed) print subsystem of your OS (&OS;).</para> +<para>This handbook describes &tdeprint;. &tdeprint; is not a standalone program. It is the new printing framework for &kde; 2.2. &tdeprint; is an intermediate layer between &kde; (or other) applications and the selected (and installed) print subsystem of your OS (&OS;).</para> </abstract> <keywordset> -<keyword ->KDE</keyword> -<keyword ->tdebase</keyword> -<keyword ->tdeprint</keyword> -<keyword ->print</keyword> -<keyword ->printing</keyword> -<keyword ->CUPS</keyword> -<keyword ->LPR</keyword> +<keyword>KDE</keyword> +<keyword>tdebase</keyword> +<keyword>tdeprint</keyword> +<keyword>print</keyword> +<keyword>printing</keyword> +<keyword>CUPS</keyword> +<keyword>LPR</keyword> </keywordset> </bookinfo> <chapter id="introduction"> -<title ->Introduction</title> +<title>Introduction</title> -<para ->This handbook describes &tdeprint;. &tdeprint; is not a standalone program. It is the new printing framework for &kde; 2.2. &tdeprint; is an intermediate layer between &kde; (or other) applications and the selected (and installed) print subsystem of your OS (&OS;).</para> +<para>This handbook describes &tdeprint;. &tdeprint; is not a standalone program. It is the new printing framework for &kde; 2.2. &tdeprint; is an intermediate layer between &kde; (or other) applications and the selected (and installed) print subsystem of your OS (&OS;).</para> -<para ->It should be noted that both the developer of this application, and the author of this document are most familiar with &CUPS; as a printing system. At the time of writing, &CUPS; is the best supported printing subsystem, and it is the best documented.</para> +<para>It should be noted that both the developer of this application, and the author of this document are most familiar with &CUPS; as a printing system. At the time of writing, &CUPS; is the best supported printing subsystem, and it is the best documented.</para> -<para ->This handbook is a work in progress, and later versions of the &tdeprint; software and editions of this handbook will support and explore more closely other printing systems.</para> +<para>This handbook is a work in progress, and later versions of the &tdeprint; software and editions of this handbook will support and explore more closely other printing systems.</para> -<para ->In the meantime, even if your printing subsystem is not yet well covered, you are encouraged to explore the <guilabel ->Printing Manager</guilabel -> module in &kcontrol;, and you will find its operation to hopefully be fairly self evident, no matter what printing subsystem you use.</para> +<para>In the meantime, even if your printing subsystem is not yet well covered, you are encouraged to explore the <guilabel>Printing Manager</guilabel> module in &kcontrol;, and you will find its operation to hopefully be fairly self evident, no matter what printing subsystem you use.</para> -<para ->Lauri Watts, &kde; documentation team</para> +<para>Lauri Watts, &kde; documentation team</para> -<!-- Insert here screenshot : <steinbruch_scaled.png -> --> +<!-- Insert here screenshot : <steinbruch_scaled.png> --> <sect1> -<title ->To configure your printing subsystem from &kcontrol;</title> - -<para ->To configure your printing subsystem from &kcontrol;, go to <menuchoice -><guilabel ->System</guilabel -><guilabel ->Printing Manager</guilabel -></menuchoice -> and select your subsystem. Or you can let &tdeprint; try to determine it... </para> +<title>To configure your printing subsystem from &kcontrol;</title> + +<para>To configure your printing subsystem from &kcontrol;, go to <menuchoice><guilabel>System</guilabel><guilabel>Printing Manager</guilabel></menuchoice> and select your subsystem. Or you can let &tdeprint; try to determine it... </para> <screenshot> -<screeninfo ->&CUPS; Printing Manager dialogue: overview via &kcontrol;</screeninfo> +<screeninfo>&CUPS; Printing Manager dialogue: overview via &kcontrol;</screeninfo> <mediaobject> <imageobject> <imagedata fileref="steinbruch_scaled.png" format="PNG"/></imageobject> <textobject> -<phrase ->The dialogue to configure the &CUPS; server: security settings</phrase -></textobject> -<caption -><para ->Configuration of printing subsystem from &kcontrol;</para -></caption> +<phrase>The dialogue to configure the &CUPS; server: security settings</phrase></textobject> +<caption><para>Configuration of printing subsystem from &kcontrol;</para></caption> </mediaobject> </screenshot> </sect1> @@ -235,22 +141,10 @@ format="PNG"/></imageobject> &final-word-doc; <chapter id="credits-and-license"> -<title ->Credits And Licences</title> - -<para ->&tdeprint; copyright 2001, Michael Goffioul <email ->tdeprint@swing.be</email -></para> -&underGPL; <para ->Documentation copyright 2001, Kurt Pfeifle, <email ->kpfeifle@danka.de</email -></para -> &underFDL; <para ->Conversion to British English: Malcolm Hunter <email ->malcolm.hunter@gmx.co.uk</email -></para -> +<title>Credits And Licences</title> + +<para>&tdeprint; copyright 2001, Michael Goffioul <email>tdeprint@swing.be</email></para> +&underGPL; <para>Documentation copyright 2001, Kurt Pfeifle, <email>kpfeifle@danka.de</email></para> &underFDL; <para>Conversion to British English: Malcolm Hunter <email>malcolm.hunter@gmx.co.uk</email></para> </chapter> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/lpd.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/lpd.docbook index 8c39ba87173..e99e2abeea7 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/lpd.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/lpd.docbook @@ -1,27 +1,13 @@ <chapter id="lpd-module"> -<title ->Generic <acronym ->LPD</acronym -> Module (&UNIX;)</title> +<title>Generic <acronym>LPD</acronym> Module (&UNIX;)</title> <sect1> -<title ->Overview of Provided Features</title> +<title>Overview of Provided Features</title> -<para ->Module used by default (on first start for example).</para> +<para>Module used by default (on first start for example).</para> -<para ->Generic module that only allows sending of print jobs. No printer or job management supported. It is made to work on a wide variety of &UNIX; flavours: &Linux;/<acronym ->LPR</acronym ->, &HP-UX;, Solaris, &IRIX;. It also supports some <application ->LPRng</application -> extensions (like the absence of continuation character <literal ->\</literal -> in <filename ->printcap</filename -> files).</para> +<para>Generic module that only allows sending of print jobs. No printer or job management supported. It is made to work on a wide variety of &UNIX; flavours: &Linux;/<acronym>LPR</acronym>, &HP-UX;, Solaris, &IRIX;. It also supports some <application>LPRng</application> extensions (like the absence of continuation character <literal>\</literal> in <filename>printcap</filename> files).</para> </sect1> </chapter> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/lpr-bsd.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/lpr-bsd.docbook index 9d6bcbbf86d..cda258b7be3 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/lpr-bsd.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/lpr-bsd.docbook @@ -1,36 +1,20 @@ <chapter id="lpr-bsd-style-module"> -<title -><acronym ->LPR</acronym -> (<acronym ->BSD</acronym ->)</title> +<title><acronym>LPR</acronym> (<acronym>BSD</acronym>)</title> -<para ->Plain (old?) <acronym ->LPR</acronym -> support. An <acronym ->LPRng</acronym -> module is in development, and hopefully available for 2.3 release.</para> +<para>Plain (old?) <acronym>LPR</acronym> support. An <acronym>LPRng</acronym> module is in development, and hopefully available for 2.3 release.</para> <sect1> -<title ->Overview of Provided Features</title> +<title>Overview of Provided Features</title> <itemizedlist> <listitem> -<para ->Printer management: basic support to add/remove/configure a printer, compatible with &RedHat;-6.x systems (<command ->printtool</command -> + rhs-printfilers packages).</para> +<para>Printer management: basic support to add/remove/configure a printer, compatible with &RedHat;-6.x systems (<command>printtool</command> + rhs-printfilers packages).</para> </listitem> <listitem> -<para ->Job management: not supported</para> +<para>Job management: not supported</para> </listitem> <listitem> -<para ->Print options: basic control</para> +<para>Print options: basic control</para> </listitem> </itemizedlist> </sect1> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/lprng.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/lprng.docbook index 193747db5f2..a765cbc23ff 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/lprng.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/lprng.docbook @@ -1,12 +1,6 @@ <chapter id="lprng-module"> -<title -><application ->LPRng</application -></title> +<title><application>LPRng</application></title> -<para ->An <application ->LPRng</application -> module for &tdeprint; is in development, and hopefully available for the &kde; 2.3 release.</para> +<para>An <application>LPRng</application> module for &tdeprint; is in development, and hopefully available for the &kde; 2.3 release.</para> </chapter> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/rlpr.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/rlpr.docbook index 88b2ac1dd7b..3c7858fda5d 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/rlpr.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/rlpr.docbook @@ -1,24 +1,12 @@ <chapter id="rlpr-module"> -<title ->Module Built Around <application ->rlpr</application -> Utility</title> +<title>Module Built Around <application>rlpr</application> Utility</title> <sect1> -<title ->Overview of provided features</title> +<title>Overview of provided features</title> -<para ->Printer management: basic operations are supported (add/remove/modify).</para> +<para>Printer management: basic operations are supported (add/remove/modify).</para> -<para ->Each user can predefine the printers he wants to use by specifying the host and related printer queues. Printers are stored on a <quote ->per user basis</quote ->. This module is built around the <application ->rlpr</application -> utility <ulink url="http://truffula.com/rlpr/" ->rlpr</ulink -></para> +<para>Each user can predefine the printers he wants to use by specifying the host and related printer queues. Printers are stored on a <quote>per user basis</quote>. This module is built around the <application>rlpr</application> utility <ulink url="http://truffula.com/rlpr/">rlpr</ulink></para> </sect1> </chapter> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/tech-overview.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/tech-overview.docbook index 05bfbc915c4..37fa1a89985 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/tech-overview.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/tech-overview.docbook @@ -1,164 +1,86 @@ <chapter id="technical-overview"> -<title ->Technical Overview</title> +<title>Technical Overview</title> -<para ->This chapter aims to give a technical overview of &tdeprint; which non-programmers can comprehend.</para> +<para>This chapter aims to give a technical overview of &tdeprint; which non-programmers can comprehend.</para> -<para ->&tdeprint; is a new and revolutionary tool to give easy access to printing services for both &kde; users and &kde; developers.</para> +<para>&tdeprint; is a new and revolutionary tool to give easy access to printing services for both &kde; users and &kde; developers.</para> <sect1 id="brief-description"> -<title ->A Brief Description of &tdeprint;</title> +<title>A Brief Description of &tdeprint;</title> -<para ->You can access the functions of &tdeprint; in different ways: through the Printing Manger in the &kcontrol;, through the <command ->kprinter</command -> command or through the dialogue that pops up if you want to print.</para> +<para>You can access the functions of &tdeprint; in different ways: through the Printing Manger in the &kcontrol;, through the <command>kprinter</command> command or through the dialogue that pops up if you want to print.</para> <sect2 id="what-tdeprint-is-not"> -<title ->What it is <emphasis ->not</emphasis -></title> - -<para ->&tdeprint; is <emphasis ->not</emphasis -> a replacement for the printing subsystem itself. &tdeprint; does <emphasis ->not</emphasis -> therefore give provision for spooling, and it does <emphasis ->not</emphasis -> do the basic processing of &PostScript; or other print data.</para> +<title>What it is <emphasis>not</emphasis></title> + +<para>&tdeprint; is <emphasis>not</emphasis> a replacement for the printing subsystem itself. &tdeprint; does <emphasis>not</emphasis> therefore give provision for spooling, and it does <emphasis>not</emphasis> do the basic processing of &PostScript; or other print data.</para> </sect2> <sect2 id="what-kde-print-is"> -<title ->What it <emphasis ->is</emphasis -></title> -<para ->&tdeprint; is an intermediate layer between the spooling and the data processing print subsystem (as installed), and the application that seeks to print. &tdeprint; provides a common interface for &kde; developers and &kde; users, to various supported print subsystems. At the same time, it is customisable, and highly configurable.</para> +<title>What it <emphasis>is</emphasis></title> +<para>&tdeprint; is an intermediate layer between the spooling and the data processing print subsystem (as installed), and the application that seeks to print. &tdeprint; provides a common interface for &kde; developers and &kde; users, to various supported print subsystems. At the same time, it is customisable, and highly configurable.</para> -<para ->&tdeprint; is easy to use for both &kde; developers and end-users. Developers can port their applications, with minimal changes, to use &tdeprint; instead of the old &Qt; print <quote ->system</quote ->. Users can easily choose and configure their print subsystem.</para> +<para>&tdeprint; is easy to use for both &kde; developers and end-users. Developers can port their applications, with minimal changes, to use &tdeprint; instead of the old &Qt; print <quote>system</quote>. Users can easily choose and configure their print subsystem.</para> -<para ->For a reference to new &kde; users: &Qt; is the basic library and graphical toolkit, which is used by all &kde; applications; &Qt; is developed by TrollTech, a Norwegian software company.</para> +<para>For a reference to new &kde; users: &Qt; is the basic library and graphical toolkit, which is used by all &kde; applications; &Qt; is developed by TrollTech, a Norwegian software company.</para> </sect2> </sect1> <sect1 id="different-users"> -<title ->&tdeprint; -- Different Usage for Different People</title> +<title>&tdeprint; -- Different Usage for Different People</title> -<para ->&tdeprint; has different faces for different people.</para> +<para>&tdeprint; has different faces for different people.</para> <sect2 id="what-users-can-do"> -<title ->What users and administrators can do with &tdeprint;</title> - -<para ->&tdeprint; allows users and/or administrators, depending on their rights, access to printing subsystems (&CUPS;, <acronym ->LPD</acronym ->, <acronym ->RLPR</acronym ->, <application ->LPRng</application ->, <application ->PDQ</application -> &etc;) through a &kde; graphical user interface (&GUI;). Using &tdeprint;, they can print, administer jobs, printers and the printing daemon, all in a comfortable manner.</para> - -<para ->Experienced users will like the capability to plug any working filter for the print data between the output of their application and the input, into the chosen print subsystem. Some examples for this already ship with <quote ->plain vanilla</quote -> &tdeprint;. Read on.</para> +<title>What users and administrators can do with &tdeprint;</title> + +<para>&tdeprint; allows users and/or administrators, depending on their rights, access to printing subsystems (&CUPS;, <acronym>LPD</acronym>, <acronym>RLPR</acronym>, <application>LPRng</application>, <application>PDQ</application> &etc;) through a &kde; graphical user interface (&GUI;). Using &tdeprint;, they can print, administer jobs, printers and the printing daemon, all in a comfortable manner.</para> + +<para>Experienced users will like the capability to plug any working filter for the print data between the output of their application and the input, into the chosen print subsystem. Some examples for this already ship with <quote>plain vanilla</quote> &tdeprint;. Read on.</para> </sect2> <sect2 id="what-developers-can-do"> -<title ->What &kde; developers can do with it...</title> - -<para ->If a &kde; developer needs printing access for his application, he does not code the printing functions from scratch. Before &kde; 2.2 this service was provided by the <classname ->QPrinter</classname -> class, a library function of the &Qt; Toolkit. The <classname ->QPrinter</classname -> class relied on the out-moded <quote ->Line Printer Daemon</quote -> (<acronym ->LPD</acronym ->). The &tdeprint; library bases itself firmly on the more modern Common &UNIX; Printing System (&CUPS;), while at the same time keeping backward compatibility with <acronym ->LPD</acronym -> and other legacy, or less elaborate, print systems. It also <quote ->leaves the door open</quote -> for any new development that might occur.</para> - -<para ->For &kde; developers to use the new &tdeprint; class in their applications, they require only minimal changes to their code: for every call of <classname ->QPrinter</classname ->, they just need to change this to <classname ->KPrinter</classname ->. Replacing one (!) letter in a few spots, and automatically they are done; their application can then use all of the features of the new &tdeprint; library.</para> - -<para ->More ambitious developers, or ones with special requirements, can do more: despite &tdeprint;'s feature-rich framework, they are still able to customise the print dialogue of their application by creating an additional <quote ->Tab</quote ->, where their extensions to the standard &tdeprint; will feel right at home.</para> - - -<para ->This last mentioned feature has not been used widely inside &kde; so far, as developers are not yet fully aware of &tdeprint;'s power. Expect more of this in the near future. One example I discovered is the &kcron; application. It lets you edit the crontab through a &GUI;. The developers have implemented a printing feature that lets you (or <systemitem class="username" ->root</systemitem ->) choose if you want to print the whole of crontab (for all users) or just the part that is marked. You can see the effects on &tdeprint; in the following screenshots.</para> - -<para ->This shot shows a sample from the &kcron; utility. <screenshot> -<screeninfo ->&kcron; utility: a small sample of a system's cronjobs as shown through the &kde; <acronym ->GUI</acronym ->&GUI;.</screeninfo> +<title>What &kde; developers can do with it...</title> + +<para>If a &kde; developer needs printing access for his application, he does not code the printing functions from scratch. Before &kde; 2.2 this service was provided by the <classname>QPrinter</classname> class, a library function of the &Qt; Toolkit. The <classname>QPrinter</classname> class relied on the out-moded <quote>Line Printer Daemon</quote> (<acronym>LPD</acronym>). The &tdeprint; library bases itself firmly on the more modern Common &UNIX; Printing System (&CUPS;), while at the same time keeping backward compatibility with <acronym>LPD</acronym> and other legacy, or less elaborate, print systems. It also <quote>leaves the door open</quote> for any new development that might occur.</para> + +<para>For &kde; developers to use the new &tdeprint; class in their applications, they require only minimal changes to their code: for every call of <classname>QPrinter</classname>, they just need to change this to <classname>KPrinter</classname>. Replacing one (!) letter in a few spots, and automatically they are done; their application can then use all of the features of the new &tdeprint; library.</para> + +<para>More ambitious developers, or ones with special requirements, can do more: despite &tdeprint;'s feature-rich framework, they are still able to customise the print dialogue of their application by creating an additional <quote>Tab</quote>, where their extensions to the standard &tdeprint; will feel right at home.</para> + + +<para>This last mentioned feature has not been used widely inside &kde; so far, as developers are not yet fully aware of &tdeprint;'s power. Expect more of this in the near future. One example I discovered is the &kcron; application. It lets you edit the crontab through a &GUI;. The developers have implemented a printing feature that lets you (or <systemitem class="username">root</systemitem>) choose if you want to print the whole of crontab (for all users) or just the part that is marked. You can see the effects on &tdeprint; in the following screenshots.</para> + +<para>This shot shows a sample from the &kcron; utility. <screenshot> +<screeninfo>&kcron; utility: a small sample of a system's cronjobs as shown through the &kde; <acronym>GUI</acronym>&GUI;.</screeninfo> <mediaobject> <imageobject> <imagedata fileref="kcron_to_be_printed.png" format="PNG"/></imageobject> <textobject> -<phrase ->The &kcron; developers let you choose to print the whole of the cron table or just the marked part of it.</phrase -></textobject> +<phrase>The &kcron; developers let you choose to print the whole of the cron table or just the marked part of it.</phrase></textobject> </mediaobject> </screenshot> </para> -<para ->The dialogue to configure &kcron;'s printing options: the additional tab titled <guilabel ->Cron Options</guilabel -> is from inside &kcron;, not &tdeprint;; it is a special extension added by the &kcron; developers for printing purposes, not originating from, but executed by &tdeprint;. Developers of other applications are free to implement their own goodies, if they feel need for it.</para> +<para>The dialogue to configure &kcron;'s printing options: the additional tab titled <guilabel>Cron Options</guilabel> is from inside &kcron;, not &tdeprint;; it is a special extension added by the &kcron; developers for printing purposes, not originating from, but executed by &tdeprint;. Developers of other applications are free to implement their own goodies, if they feel need for it.</para> <screenshot> -<screeninfo ->&kcron;'s addition to the &tdeprint; dialogue.</screeninfo> +<screeninfo>&kcron;'s addition to the &tdeprint; dialogue.</screeninfo> <mediaobject> <imageobject> <imagedata fileref="kprinter_with_kcron_developer_special.png" format="PNG"/></imageobject> <textobject> -<phrase ->&kcron;'s addition to the &tdeprint; dialogue.</phrase -></textobject> +<phrase>&kcron;'s addition to the &tdeprint; dialogue.</phrase></textobject> <caption> -<para ->&kcron;'s addition to the &tdeprint; dialogue.</para> +<para>&kcron;'s addition to the &tdeprint; dialogue.</para> </caption> </mediaobject> </screenshot> @@ -166,161 +88,69 @@ format="PNG"/></imageobject> </sect2> <sect2> -<title ->What &tdeprint; offers to everybody...</title> - -<para ->&tdeprint;'s easy-to-use interface for all supported print subsystems of course does not eliminate basic traditional weaknesses of some of those systems. But it smooths some rough edges. Different users may use different printing systems on the same box. A user is free to even switch <quote ->on the fly</quote ->, from the print dialogue, the print subsystem to be used for the next job. (This is possible if different systems are installed in a way that they don't <quote ->get in each other's way</quote ->.)</para> - -<para ->Most &UNIX; users are used to <acronym ->LPD</acronym -> printing. <acronym ->LPD</acronym -> provides only basic printing functions, is very inflexible and does not utilise the many options of more modern print systems like &CUPS;. While also working remotely over any distance (like every TCP/IP based protocol), <acronym ->LPD</acronym -> lacks bi-directional communication, authentication, access control and encryption support.</para> - -<para ->&tdeprint; can use &CUPS; to support:</para> +<title>What &tdeprint; offers to everybody...</title> + +<para>&tdeprint;'s easy-to-use interface for all supported print subsystems of course does not eliminate basic traditional weaknesses of some of those systems. But it smooths some rough edges. Different users may use different printing systems on the same box. A user is free to even switch <quote>on the fly</quote>, from the print dialogue, the print subsystem to be used for the next job. (This is possible if different systems are installed in a way that they don't <quote>get in each other's way</quote>.)</para> + +<para>Most &UNIX; users are used to <acronym>LPD</acronym> printing. <acronym>LPD</acronym> provides only basic printing functions, is very inflexible and does not utilise the many options of more modern print systems like &CUPS;. While also working remotely over any distance (like every TCP/IP based protocol), <acronym>LPD</acronym> lacks bi-directional communication, authentication, access control and encryption support.</para> + +<para>&tdeprint; can use &CUPS; to support:</para> <itemizedlist> <listitem> -<para ->Querying the <acronym ->LAN</acronym -> for available printers,</para> +<para>Querying the <acronym>LAN</acronym> for available printers,</para> </listitem> <listitem> -<para ->Basic, Digest, and Certificate Authentication,</para> +<para>Basic, Digest, and Certificate Authentication,</para> </listitem> <listitem> -<para ->Access Control based on <acronym ->IP</acronym -> addresses, net addresses, netmasks, host- and domain names,</para> +<para>Access Control based on <acronym>IP</acronym> addresses, net addresses, netmasks, host- and domain names,</para> </listitem> <listitem> -<para ->and 128-Bit TLS or SSL3 encryption of print data, to prevent eavesdropping, or at least make it much more difficult.</para> +<para>and 128-Bit TLS or SSL3 encryption of print data, to prevent eavesdropping, or at least make it much more difficult.</para> </listitem> </itemizedlist> -<para ->This makes &tdeprint; a much more robust and reliable solution than using the venerable <acronym ->LPD</acronym ->.</para> +<para>This makes &tdeprint; a much more robust and reliable solution than using the venerable <acronym>LPD</acronym>.</para> </sect2> <sect2> -<title ->How to access &tdeprint; </title> +<title>How to access &tdeprint; </title> -<para ->You get access to &tdeprint;, or parts of it, in four different ways:</para> +<para>You get access to &tdeprint;, or parts of it, in four different ways:</para> <itemizedlist> -<listitem -><para ->through your applications: if you call the printing dialogue (either <menuchoice -><guilabel ->File</guilabel -> <guilabel ->Print...</guilabel -></menuchoice ->) or the button with the little printer icon on it; this opens the printing dialogue.</para -></listitem> - -<listitem -><para ->through the typed command <command ->kprinter</command -> in a <application ->terminal</application -> or a &konsole; window or from the <guilabel ->Run Command...</guilabel -> mini-<acronym ->CLI</acronym -> window: this also opens the printing dialogue.</para -></listitem> - -<listitem -><para ->from the <inlinemediaobject -><imageobject -> <imagedata fileref="kcontrol-icon.png" format="PNG"/></imageobject -> </inlinemediaobject -> button, starting &kcontrol;, and then go to <menuchoice -><guilabel ->System</guilabel -><guilabel ->Printing Manager</guilabel -></menuchoice ->. This opens the &tdeprint; administration which is part of the &kcontrolcenter; and also lets you switch to other parts of the &kcontrol;</para -></listitem> - -<listitem -><para ->from a command line (&konsole; or mini-<acronym ->CLI</acronym ->) type <userinput -> <command ->tdecmshell</command -> <option ->printmgr</option -></userinput ->. This opens just the &tdeprint; part of &kcontrol; to change your settings </para -></listitem> +<listitem><para>through your applications: if you call the printing dialogue (either <menuchoice><guilabel>File</guilabel> <guilabel>Print...</guilabel></menuchoice>) or the button with the little printer icon on it; this opens the printing dialogue.</para></listitem> + +<listitem><para>through the typed command <command>kprinter</command> in a <application>terminal</application> or a &konsole; window or from the <guilabel>Run Command...</guilabel> mini-<acronym>CLI</acronym> window: this also opens the printing dialogue.</para></listitem> + +<listitem><para>from the <inlinemediaobject><imageobject> <imagedata fileref="kcontrol-icon.png" format="PNG"/></imageobject> </inlinemediaobject> button, starting &kcontrol;, and then go to <menuchoice><guilabel>System</guilabel><guilabel>Printing Manager</guilabel></menuchoice>. This opens the &tdeprint; administration which is part of the &kcontrolcenter; and also lets you switch to other parts of the &kcontrol;</para></listitem> + +<listitem><para>from a command line (&konsole; or mini-<acronym>CLI</acronym>) type <userinput> <command>tdecmshell</command> <option>printmgr</option></userinput>. This opens just the &tdeprint; part of &kcontrol; to change your settings </para></listitem> </itemizedlist> <screenshot> -<screeninfo ->&kprinter; dialogue to be started from <guilabel ->Run Command...</guilabel -> window</screeninfo> +<screeninfo>&kprinter; dialogue to be started from <guilabel>Run Command...</guilabel> window</screeninfo> <mediaobject> <imageobject> <imagedata fileref="kprinter_called_from_run_command.png" format="PNG"/></imageobject> <textobject> -<phrase ->Starting the &kprinter; dialogue from a <guilabel ->Run Command...</guilabel -> window.</phrase -></textobject> -<caption -><para ->Starting the &kprinter; dialogue from a <guilabel ->Run Command...</guilabel -> window.</para -></caption> +<phrase>Starting the &kprinter; dialogue from a <guilabel>Run Command...</guilabel> window.</phrase></textobject> +<caption><para>Starting the &kprinter; dialogue from a <guilabel>Run Command...</guilabel> window.</para></caption> </mediaobject> </screenshot> -<!-- TODO: This one ought to be a screenshot LW. --> <para ->Here is a &kivio; drawing of the &kprinter; dialogue as it pops up after being started... You can always add a new printer by clicking on the small <guiicon ->Wizard</guiicon -> button (marked red/yellow in this drawing).</para> +<!-- TODO: This one ought to be a screenshot LW. --> <para>Here is a &kivio; drawing of the &kprinter; dialogue as it pops up after being started... You can always add a new printer by clicking on the small <guiicon>Wizard</guiicon> button (marked red/yellow in this drawing).</para> <screenshot> -<screeninfo ->&kprinter; dialogue started (&kivio; draft drawing) </screeninfo> +<screeninfo>&kprinter; dialogue started (&kivio; draft drawing) </screeninfo> <mediaobject> <imageobject> <imagedata fileref="kprinter-kivio.png" format="PNG"/></imageobject> <textobject> -<phrase ->&kprinter; dialogue started (&kivio; draft drawing)</phrase -></textobject> -<caption -><para ->&kprinter; dialogue started (&kivio; draft drawing)</para -></caption> +<phrase>&kprinter; dialogue started (&kivio; draft drawing)</phrase></textobject> +<caption><para>&kprinter; dialogue started (&kivio; draft drawing)</para></caption> </mediaobject> </screenshot> diff --git a/tde-i18n-en_GB/docs/tdebase/tdeprint/theory.docbook b/tde-i18n-en_GB/docs/tdebase/tdeprint/theory.docbook index d39e0969f85..7578f1a633b 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdeprint/theory.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdeprint/theory.docbook @@ -1,75 +1,36 @@ <chapter id="theory"> -<title ->Some Theoretical Background: &CUPS;, <acronym ->IPP</acronym ->, &PostScript; and <application ->Ghostscript</application -></title> - -<para ->This chapter aims to give a bit of theoretical background to printing in general, and to &CUPS; especially. If you are not in need of this, you might like to skip ahead to the <link linkend="getting-started" ->next chapter</link ->. Chances are you will come back to this chapter at some point anyway, because sometimes one needs extra theory to solve a practical problem.</para> +<title>Some Theoretical Background: &CUPS;, <acronym>IPP</acronym>, &PostScript; and <application>Ghostscript</application></title> + +<para>This chapter aims to give a bit of theoretical background to printing in general, and to &CUPS; especially. If you are not in need of this, you might like to skip ahead to the <link linkend="getting-started">next chapter</link>. Chances are you will come back to this chapter at some point anyway, because sometimes one needs extra theory to solve a practical problem.</para> <sect1 id="basics-of-printing"> -<title ->Basics About Printing</title> +<title>Basics About Printing</title> -<para ->Printing is one of the more complicated chapters in <acronym ->IT</acronym -> technology.</para> +<para>Printing is one of the more complicated chapters in <acronym>IT</acronym> technology.</para> -<para ->Earlier on in history, every developer of a program that was capable of producing printable output had to write his own printer drivers too. That was quite complicated, because different programs have different file formats. Even programs with the same purpose, for example: word processors, often do not understand each other's formats. There was therefore no common interface to all printers, hence the programmers often supported only a few selected models.</para> +<para>Earlier on in history, every developer of a program that was capable of producing printable output had to write his own printer drivers too. That was quite complicated, because different programs have different file formats. Even programs with the same purpose, for example: word processors, often do not understand each other's formats. There was therefore no common interface to all printers, hence the programmers often supported only a few selected models.</para> -<para ->A new device appearing on the market required the program authors to write a new driver if they wanted their program to support it. Also for manufacturers, it was impossible to make sure their device was supported by any program known to the world (although there were far fewer than today).</para> +<para>A new device appearing on the market required the program authors to write a new driver if they wanted their program to support it. Also for manufacturers, it was impossible to make sure their device was supported by any program known to the world (although there were far fewer than today).</para> -<para ->Having to support ten application programs and a dozen printers, meant a system administrator had to deal with 120 drivers. So the development of unified interfaces between programs and printers became an urgent need.</para> +<para>Having to support ten application programs and a dozen printers, meant a system administrator had to deal with 120 drivers. So the development of unified interfaces between programs and printers became an urgent need.</para> -<para ->The appearance of <quote ->Page Description Languages</quote ->, describing the graphical representation of ink and toner on sheets of paper (or other output devices, like monitors, photo typesetters, &etc;) in a common way, was a move that filled a big gap. </para> +<para>The appearance of <quote>Page Description Languages</quote>, describing the graphical representation of ink and toner on sheets of paper (or other output devices, like monitors, photo typesetters, &etc;) in a common way, was a move that filled a big gap. </para> -<para ->One such development was &PostScript; by Adobe. It meant that an application programmer could concentrate on making his program generate a &PostScript; language description of his printable page, while printing device developers could focus on making their devices &PostScript; literate.</para> +<para>One such development was &PostScript; by Adobe. It meant that an application programmer could concentrate on making his program generate a &PostScript; language description of his printable page, while printing device developers could focus on making their devices &PostScript; literate.</para> -<para ->Of course, over time, there came the development of other description methods. The most important competitors to &PostScript; were <acronym ->PCL</acronym -> (<quote ->Print Control Language</quote ->, from &Hewlett-Packard;), <quote ->ESC/P</quote -> (from Epson) and <acronym ->GDI</acronym -> (<quote ->Graphical Device Interface</quote -> from &Microsoft;).</para> +<para>Of course, over time, there came the development of other description methods. The most important competitors to &PostScript; were <acronym>PCL</acronym> (<quote>Print Control Language</quote>, from &Hewlett-Packard;), <quote>ESC/P</quote> (from Epson) and <acronym>GDI</acronym> (<quote>Graphical Device Interface</quote> from &Microsoft;).</para> -<para ->The appearance of these page description languages made life easier, and facilitated further development for everybody. Yet the fact that there still remained different, incompatible, and competing page description languages keeps life for users, administrators, developers and manufacturers difficult enough.</para> +<para>The appearance of these page description languages made life easier, and facilitated further development for everybody. Yet the fact that there still remained different, incompatible, and competing page description languages keeps life for users, administrators, developers and manufacturers difficult enough.</para> <sect2> -<title ->&PostScript; in memory - Bitmaps on Paper</title> +<title>&PostScript; in memory - Bitmaps on Paper</title> -<para ->&PostScript; is most heavily used in professional printing environments such as PrePress and printing service industries. In the &UNIX; and &Linux; domains, &PostScript; is the predominant standard as a <acronym ->PDL</acronym ->. Here, nearly every program generates a &PostScript; representation of its pages once you push the <quote ->Print</quote -> button. Let us look at a simple example of (hand-made) &PostScript; code. The following listing describes two simple drawings:</para> +<para>&PostScript; is most heavily used in professional printing environments such as PrePress and printing service industries. In the &UNIX; and &Linux; domains, &PostScript; is the predominant standard as a <acronym>PDL</acronym>. Here, nearly every program generates a &PostScript; representation of its pages once you push the <quote>Print</quote> button. Let us look at a simple example of (hand-made) &PostScript; code. The following listing describes two simple drawings:</para> <example id="coded-postscript"> -<title ->&PostScript; Code</title> -<screen ->%!PS +<title>&PostScript; Code</title> +<screen>%!PS 100 100 moveto 0 50 rlineto 50 0 rlineto @@ -85,193 +46,98 @@ closepath .2 setgray fill</screen> </example> -<para ->This tells the imaginary &PostScript; <quote ->pen</quote -> to draw a path of a certain shape, and then fill it with different shades of grey. The first part translates into more comprehensive English as <quote ->Go to coordinate (100,100), draw a line with length 50 upward; then one from there to the right, then down again, and finally close this part. Now fill the drawn shape with 70% darkness grey.</quote -></para> +<para>This tells the imaginary &PostScript; <quote>pen</quote> to draw a path of a certain shape, and then fill it with different shades of grey. The first part translates into more comprehensive English as <quote>Go to coordinate (100,100), draw a line with length 50 upward; then one from there to the right, then down again, and finally close this part. Now fill the drawn shape with 70% darkness grey.</quote></para> <example id="rendered-postscript"> -<title ->Rendered &PostScript;</title> +<title>Rendered &PostScript;</title> <mediaobject> <imageobject> <imagedata fileref="ps-boxes.png" format="PNG"/> </imageobject> <textobject> -<phrase -><xref linkend="coded-postscript"/> example rendered as an image.</phrase> +<phrase><xref linkend="coded-postscript"/> example rendered as an image.</phrase> </textobject> </mediaobject> </example> -<para ->Of course, &PostScript; can be much more complicated than this simplistic example. It is a fully fledged programming language with many different operators and functions. You may even write &PostScript; programs to compute the value of Pi, format a hard disk or write to a file. The main value and strength of &PostScript; however lies in the field to describe the layout of graphical objects on a page: it also can scale, mirror, translate, transform, rotate and distort everything you can imagine on a piece of paper -- such as letters in different font representations, figures, shapes, shades, colours, lines, dots, raster...</para> +<para>Of course, &PostScript; can be much more complicated than this simplistic example. It is a fully fledged programming language with many different operators and functions. You may even write &PostScript; programs to compute the value of Pi, format a hard disk or write to a file. The main value and strength of &PostScript; however lies in the field to describe the layout of graphical objects on a page: it also can scale, mirror, translate, transform, rotate and distort everything you can imagine on a piece of paper -- such as letters in different font representations, figures, shapes, shades, colours, lines, dots, raster...</para> -<para ->A &PostScript; file is a representation of one or more pages to be printed, in a relatively abstract way. Ideally, it is meant to describe the pages in a device-independent way. &PostScript; is not directly <quote ->visible</quote ->; it only lives on hard disks and in <acronym ->RAM</acronym -> as a coded representation of future printouts.</para> +<para>A &PostScript; file is a representation of one or more pages to be printed, in a relatively abstract way. Ideally, it is meant to describe the pages in a device-independent way. &PostScript; is not directly <quote>visible</quote>; it only lives on hard disks and in <acronym>RAM</acronym> as a coded representation of future printouts.</para> </sect2> <sect2> -<title ->Raster Images on Paper Sheets</title> - -<para ->What you see on a piece of paper is nearly always a <quote ->raster image</quote ->. Even if your brain suggests to you that your eyes see a line: take a good magnifying glass and you will discover lots of small dots... (One example to the contrary are lines that have been drawn by <quote ->pen plotters</quote ->). And that is the only thing that the <quote ->marking engines</quote -> of today's printers can put on paper: simple dots of different colours, size and resolution, to make up a complete <quote ->page image</quote -> composed of different bitmap patterns.</para> - -<para ->Different printers need the raster image prepared in different ways. Thinking about an inkjet device: depending on its resolution, the number of inks used (the very good ones need 7 different inks, while cheaper ones might only use 3), the number of available jets (some print heads have more than 100!) dispensing ink simultaneously, the <quote ->dithering algorithm</quote -> used, and many other things, the final raster format and transfer order to the marking engine is heavily dependent on the exact model used.</para> - -<para ->Back in the early life of the <quote ->Line Printer Daemon</quote ->, printers were machines that hammered rows of <acronym ->ASCII</acronym -> text mechanically on to long media, folded as a zig-zag paper <acronym ->snake</acronym ->, drawn from a cardboard box beneath the table... What a difference from today!</para> +<title>Raster Images on Paper Sheets</title> + +<para>What you see on a piece of paper is nearly always a <quote>raster image</quote>. Even if your brain suggests to you that your eyes see a line: take a good magnifying glass and you will discover lots of small dots... (One example to the contrary are lines that have been drawn by <quote>pen plotters</quote>). And that is the only thing that the <quote>marking engines</quote> of today's printers can put on paper: simple dots of different colours, size and resolution, to make up a complete <quote>page image</quote> composed of different bitmap patterns.</para> + +<para>Different printers need the raster image prepared in different ways. Thinking about an inkjet device: depending on its resolution, the number of inks used (the very good ones need 7 different inks, while cheaper ones might only use 3), the number of available jets (some print heads have more than 100!) dispensing ink simultaneously, the <quote>dithering algorithm</quote> used, and many other things, the final raster format and transfer order to the marking engine is heavily dependent on the exact model used.</para> + +<para>Back in the early life of the <quote>Line Printer Daemon</quote>, printers were machines that hammered rows of <acronym>ASCII</acronym> text mechanically on to long media, folded as a zig-zag paper <acronym>snake</acronym>, drawn from a cardboard box beneath the table... What a difference from today!</para> </sect2> <sect2> -<title -><acronym ->RIP</acronym ->: From &PostScript; to Raster</title> - -<para ->Before the final raster images are put on paper cut-sheets, they have to be calculated somehow out of their abstract &PostScript; representation. This is a very computing-intensive process. It is called the <quote ->Raster Imaging Process</quote ->, more commonly <quote -><acronym ->RIP</acronym -></quote ->).</para> - -<para ->With &PostScript; printers the <acronym ->RIP</acronym ->-ping is taken care of by the device itself. You just send the &PostScript; file to it. The <quote ->Raster Imaging Processor</quote -> (also called the <acronym ->RIP</acronym ->) inside the printer is responsible (and specialized) to fulfill quite well this task of interpreting the &PostScript;-page descriptions and put the raster image on paper.</para> - -<para ->Smaller &PostScript; devices have a hardware-<acronym ->RIP</acronym -> built in; it is etched in silicon, on a special chip. Big professional printers often have their <acronym ->RIP</acronym -> implemented as a software-<acronym ->RIP</acronym -> inside a dedicated fast &UNIX; run computer, often a Sun SPARC Solaris or a &SGI; &IRIX; machine.</para> +<title><acronym>RIP</acronym>: From &PostScript; to Raster</title> + +<para>Before the final raster images are put on paper cut-sheets, they have to be calculated somehow out of their abstract &PostScript; representation. This is a very computing-intensive process. It is called the <quote>Raster Imaging Process</quote>, more commonly <quote><acronym>RIP</acronym></quote>).</para> + +<para>With &PostScript; printers the <acronym>RIP</acronym>-ping is taken care of by the device itself. You just send the &PostScript; file to it. The <quote>Raster Imaging Processor</quote> (also called the <acronym>RIP</acronym>) inside the printer is responsible (and specialized) to fulfill quite well this task of interpreting the &PostScript;-page descriptions and put the raster image on paper.</para> + +<para>Smaller &PostScript; devices have a hardware-<acronym>RIP</acronym> built in; it is etched in silicon, on a special chip. Big professional printers often have their <acronym>RIP</acronym> implemented as a software-<acronym>RIP</acronym> inside a dedicated fast &UNIX; run computer, often a Sun SPARC Solaris or a &SGI; &IRIX; machine.</para> </sect2> <sect2> -<title -><application ->Ghostscript</application -> as a Software <acronym ->RIP</acronym -></title> +<title><application>Ghostscript</application> as a Software <acronym>RIP</acronym></title> -<para ->But what happens, if you are not lucky enough to have a &PostScript; printer available?</para> +<para>But what happens, if you are not lucky enough to have a &PostScript; printer available?</para> -<para ->You need to do the <acronym ->RIP</acronym ->-ing before you send the print data to the marking engine. You need to digest the &PostScript; generated by your application on the host machine (the print client) itself. You need to know how the exact raster format of the target printer's marking engine must be composed.</para> +<para>You need to do the <acronym>RIP</acronym>-ing before you send the print data to the marking engine. You need to digest the &PostScript; generated by your application on the host machine (the print client) itself. You need to know how the exact raster format of the target printer's marking engine must be composed.</para> -<para ->In other words, as you can't rely on the printer to understand and interpret the &PostScript; itself, the issue becomes quite a bit more complicated. You need software that tries to solve for you the issues involved.</para> +<para>In other words, as you can't rely on the printer to understand and interpret the &PostScript; itself, the issue becomes quite a bit more complicated. You need software that tries to solve for you the issues involved.</para> -<para ->This is exactly what the omnipresent &ghostscript; package is doing for many &Linux;, *BSD and other &UNIX; boxes that need to print to non-&PostScript; printers: &ghostscript; is a &PostScript; interpreter, a software <acronym ->RIP</acronym -> capable of running many different devices.</para> +<para>This is exactly what the omnipresent &ghostscript; package is doing for many &Linux;, *BSD and other &UNIX; boxes that need to print to non-&PostScript; printers: &ghostscript; is a &PostScript; interpreter, a software <acronym>RIP</acronym> capable of running many different devices.</para> </sect2> <sect2> -<title -><quote ->Drivers</quote -> and <quote ->Filters</quote -> in General</title> - -<para ->To produce rasterised bitmaps from &PostScript; input, the concept of <quote ->filters</quote -> is used by &ghostscript;. There are many different filters in &ghostscript;, some of them specialised for a certain model of printer. &ghostscript; filterspecializedin devices have often been developed without the consent or support of the manufacturer concerned. Without access to the specifications and documentation, it was a very painstaking process to reverse engineer protocols and data formats.</para> - -<para ->Not all &ghostscript; filters work equally well for their printers. Yet, some of the newer ones, like the <application ->stp</application -> Filter of the <application ->Gimp</application -> Print project, produce excellent results leading to photographic quality on a par or even superior to their &Microsoft; &Windows; driver counterparts.</para> - -<para ->&PostScript; is what most application programs produce for printing in &UNIX; and &Linux;. Filters are the true workhorses of any printing system there. Essentially they produce the right bitmaps from any &PostScript; input for non-&PostScript; target engines.</para> +<title><quote>Drivers</quote> and <quote>Filters</quote> in General</title> + +<para>To produce rasterised bitmaps from &PostScript; input, the concept of <quote>filters</quote> is used by &ghostscript;. There are many different filters in &ghostscript;, some of them specialised for a certain model of printer. &ghostscript; filterspecializedin devices have often been developed without the consent or support of the manufacturer concerned. Without access to the specifications and documentation, it was a very painstaking process to reverse engineer protocols and data formats.</para> + +<para>Not all &ghostscript; filters work equally well for their printers. Yet, some of the newer ones, like the <application>stp</application> Filter of the <application>Gimp</application> Print project, produce excellent results leading to photographic quality on a par or even superior to their &Microsoft; &Windows; driver counterparts.</para> + +<para>&PostScript; is what most application programs produce for printing in &UNIX; and &Linux;. Filters are the true workhorses of any printing system there. Essentially they produce the right bitmaps from any &PostScript; input for non-&PostScript; target engines.</para> </sect2> <sect2> -<title ->Drivers and Filters and Backends in CUPS</title> +<title>Drivers and Filters and Backends in CUPS</title> -<para ->&CUPS; uses its own filters, though the filtering system is based on Ghostscript. Namely the pstoraster and the imagetoraster filters are directly derived from Ghostscript code. &CUPS; has reorganised and streamlined the whole mechanics of this legacy code and organised it into a few clear and distinct modules.</para> +<para>&CUPS; uses its own filters, though the filtering system is based on Ghostscript. Namely the pstoraster and the imagetoraster filters are directly derived from Ghostscript code. &CUPS; has reorganised and streamlined the whole mechanics of this legacy code and organised it into a few clear and distinct modules.</para> -<para ->This next drawing (done with the help of &kivio;) gives an overview of the filters and backends inside &CUPS; and how they fit together. The <quote ->flow</quote -> is from top to bottom. Backends are special filters: they don't convert date to a different format, but they send the ready files to the printer. There are different backends for different transfer protocols.</para> +<para>This next drawing (done with the help of &kivio;) gives an overview of the filters and backends inside &CUPS; and how they fit together. The <quote>flow</quote> is from top to bottom. Backends are special filters: they don't convert date to a different format, but they send the ready files to the printer. There are different backends for different transfer protocols.</para> <screenshot id="architecture-diagram"> -<screeninfo ->&kprinter; dialogue started (&kivio; draft drawing) </screeninfo> +<screeninfo>&kprinter; dialogue started (&kivio; draft drawing) </screeninfo> <mediaobject> <imageobject> <imagedata fileref="cups-filterarchitecture-kivio-70Percent-scaled.png" format="PNG"/></imageobject> <textobject> -<phrase ->&kprinter; dialogue started (&kivio; draft drawing)</phrase -></textobject> +<phrase>&kprinter; dialogue started (&kivio; draft drawing)</phrase></textobject> </mediaobject> </screenshot> </sect2> <sect2> -<title ->Spoolers and Printing Daemons</title> +<title>Spoolers and Printing Daemons</title> -<para ->Besides the heavy part of the filtering task to generate a print-ready bitmap, any printing software needs to use a SPOOLing mechanism: this is to line up different jobs from different users for different printers and different filters and send them accordingly to the destinations. The printing daemon takes care of all this.</para> +<para>Besides the heavy part of the filtering task to generate a print-ready bitmap, any printing software needs to use a SPOOLing mechanism: this is to line up different jobs from different users for different printers and different filters and send them accordingly to the destinations. The printing daemon takes care of all this.</para> -<para ->This daemon is keeping the house in order: it is also responsible for the job control: users should be allowed to cancel, stop, restart, &etc; their jobs (but not other peoples's jobs) and so on.</para> +<para>This daemon is keeping the house in order: it is also responsible for the job control: users should be allowed to cancel, stop, restart, &etc; their jobs (but not other peoples's jobs) and so on.</para> </sect2> @@ -280,258 +146,117 @@ format="PNG"/></imageobject> <sect1 id="cups-and-ppd"> -<title ->Excursion: How <quote ->CUPS</quote -> uses the power of &PPD;s</title> - -<para ->Now that you know how a &PostScript; language file (which describes the page layout in a largely device independent way) is transformed into a Raster Image, you might ask: <quote ->Well, there are different kinds of raster output devices: first they differ in their resolution; then there are the different paper sizes; it goes on with many finishing options (duplex prints, pamphlets, punched and stapled output with different sheets of coloured paper being drawn from different trays, &etc;). How does this fit into our model of device-independent &PostScript;?</quote -></para> - -<para ->The answer comes with so called &PostScript; Printer Description (&PPD; files. A &PPD; describes all the device dependent features which can be utilised by a certain printer model. It also contains the coded commands that must be used to call certain features of the device. But &PPD;s are not a closed book, they are simple <acronym ->ASCII</acronym -> text files.</para> - -<para ->&PPD;s were <quote ->invented</quote -> by Adobe to make it easy for manufacturers to implement their own features into &PostScript; printers, and at the same time retain a standard way of doing so. &PPD;s are well documented and described by Adobe. Their specification is a de-facto open standard.</para> +<title>Excursion: How <quote>CUPS</quote> uses the power of &PPD;s</title> + +<para>Now that you know how a &PostScript; language file (which describes the page layout in a largely device independent way) is transformed into a Raster Image, you might ask: <quote>Well, there are different kinds of raster output devices: first they differ in their resolution; then there are the different paper sizes; it goes on with many finishing options (duplex prints, pamphlets, punched and stapled output with different sheets of coloured paper being drawn from different trays, &etc;). How does this fit into our model of device-independent &PostScript;?</quote></para> + +<para>The answer comes with so called &PostScript; Printer Description (&PPD; files. A &PPD; describes all the device dependent features which can be utilised by a certain printer model. It also contains the coded commands that must be used to call certain features of the device. But &PPD;s are not a closed book, they are simple <acronym>ASCII</acronym> text files.</para> + +<para>&PPD;s were <quote>invented</quote> by Adobe to make it easy for manufacturers to implement their own features into &PostScript; printers, and at the same time retain a standard way of doing so. &PPD;s are well documented and described by Adobe. Their specification is a de-facto open standard.</para> <sect2 id="ppd-files"> -<title ->Device Dependent Print Options</title> +<title>Device Dependent Print Options</title> -<para ->Remember, advanced &PostScript; printing was originally only developed for use on &Microsoft; &Windows; and Apple &Mac; systems. For a long time, all of the feature rich printing on modern devices was simply unavailable for &Linux; and &UNIX;. &CUPS; changes this decisively. &CUPS; is closely tied with &PPD;s, and therefore existing &PPD;s can be utilised to the full by all systems powered by &CUPS;.</para> +<para>Remember, advanced &PostScript; printing was originally only developed for use on &Microsoft; &Windows; and Apple &Mac; systems. For a long time, all of the feature rich printing on modern devices was simply unavailable for &Linux; and &UNIX;. &CUPS; changes this decisively. &CUPS; is closely tied with &PPD;s, and therefore existing &PPD;s can be utilised to the full by all systems powered by &CUPS;.</para> -<para ->Using &PPD;s, printer manufacturers were able to insert device-specific hardware features into their products, for features such as duplexing, stapling, punching, finishing, &etc;. The printer drivers load this &PPD; just like an additional configuration file. Thus the printer driver learns about the available device options and how to call them; the driver also presents them in a &GUI; to the user. Through this mechanism you are still able to print <quote ->device-independent</quote -> &PostScript; page description language files and specify device-dependent finishing options on top, which are added to the application-generated &PostScript;.</para> +<para>Using &PPD;s, printer manufacturers were able to insert device-specific hardware features into their products, for features such as duplexing, stapling, punching, finishing, &etc;. The printer drivers load this &PPD; just like an additional configuration file. Thus the printer driver learns about the available device options and how to call them; the driver also presents them in a &GUI; to the user. Through this mechanism you are still able to print <quote>device-independent</quote> &PostScript; page description language files and specify device-dependent finishing options on top, which are added to the application-generated &PostScript;.</para> </sect2> <sect2> -<title ->Where to get the &PPD;s for &PostScript; Printers</title> +<title>Where to get the &PPD;s for &PostScript; Printers</title> -<para ->&PPD;s originally were not used routinely in &UNIX; and &Linux; systems. The vendors providing those &PPD;s never intended them for anything other than the originally supported &OS;s: &Microsoft; &Windows; and &MacOS;. Through its brilliant move to fully support and utilise the existing &PPD; specification, &CUPS; now gives the power to use all features of modern printers to users of &Linux; and &Linux;-like systems. &tdeprint; makes its usage even more comfortable than the &CUPS; developers ever dreamed of.</para> +<para>&PPD;s originally were not used routinely in &UNIX; and &Linux; systems. The vendors providing those &PPD;s never intended them for anything other than the originally supported &OS;s: &Microsoft; &Windows; and &MacOS;. Through its brilliant move to fully support and utilise the existing &PPD; specification, &CUPS; now gives the power to use all features of modern printers to users of &Linux; and &Linux;-like systems. &tdeprint; makes its usage even more comfortable than the &CUPS; developers ever dreamed of.</para> -<para ->&CUPS; can use original &Windows; &PPD;s, distributed by the vendors in the case of &PostScript; printers. Those normally don't cost any money, and they can be grabbed from any &Windows; computer with an installed &PostScript; driver for the model concerned, or from the disks provided with the printer. There are also several places on the web to download them.</para> +<para>&CUPS; can use original &Windows; &PPD;s, distributed by the vendors in the case of &PostScript; printers. Those normally don't cost any money, and they can be grabbed from any &Windows; computer with an installed &PostScript; driver for the model concerned, or from the disks provided with the printer. There are also several places on the web to download them.</para> </sect2> <sect2> -<title ->How Special &PPD;s are Now Useful Even For Non-&PostScript; Printers.</title> +<title>How Special &PPD;s are Now Useful Even For Non-&PostScript; Printers.</title> -<para ->Now you know how &PostScript;-Printers can use &PPD;s. But what about non-&PostScript; printers? &CUPS; has done a very good trick: by using the same format and data structure as the &PostScript; Printer Descriptions (&PPD;s) in the &PostScript; world, it can describe the available print job options for non-&PostScript; printers just the same. For its own special purposes &CUPS; just added a few special options (namely the line which defines the filter to be used for further processing of the &PostScript; file).</para> +<para>Now you know how &PostScript;-Printers can use &PPD;s. But what about non-&PostScript; printers? &CUPS; has done a very good trick: by using the same format and data structure as the &PostScript; Printer Descriptions (&PPD;s) in the &PostScript; world, it can describe the available print job options for non-&PostScript; printers just the same. For its own special purposes &CUPS; just added a few special options (namely the line which defines the filter to be used for further processing of the &PostScript; file).</para> -<para ->So, the developers could use the same software engine to parse the Printer Description Files for available options for all sorts of printers. Of course the &CUPS; developers could not rely on the non-&PostScript; hardware manufacturers to suddenly develop &PPD;s. They had to do the difficult start themselves and write them from scratch. More than 1000 of these are available through the commercial version of &CUPS;, called <application ->ESP PrintPro</application ->.</para> +<para>So, the developers could use the same software engine to parse the Printer Description Files for available options for all sorts of printers. Of course the &CUPS; developers could not rely on the non-&PostScript; hardware manufacturers to suddenly develop &PPD;s. They had to do the difficult start themselves and write them from scratch. More than 1000 of these are available through the commercial version of &CUPS;, called <application>ESP PrintPro</application>.</para> -<para ->Meanwhile there are a lot of &CUPS;-specific &PPD;s available. Even now those are in most cases not originating from the printer manufacturers, but from Free software developers. The &CUPS; folks proofed it, and others followed suit: where &Linux; and &UNIX; printing one or two years ago still was a kludge, it is now able to support a big range of printers, including 7-colour inkjets capable of pushing them to Photo Quality output.</para> +<para>Meanwhile there are a lot of &CUPS;-specific &PPD;s available. Even now those are in most cases not originating from the printer manufacturers, but from Free software developers. The &CUPS; folks proofed it, and others followed suit: where &Linux; and &UNIX; printing one or two years ago still was a kludge, it is now able to support a big range of printers, including 7-colour inkjets capable of pushing them to Photo Quality output.</para> </sect2> <sect2> -<title ->Different Ways to get &PPD;s for non-&PostScript; Printers</title> +<title>Different Ways to get &PPD;s for non-&PostScript; Printers</title> -<para ->You can get &PPD;s to be used with &CUPS; and non-&PostScript; printers from different areas in the Web:</para> +<para>You can get &PPD;s to be used with &CUPS; and non-&PostScript; printers from different areas in the Web:</para> <itemizedlist> <listitem> -<para ->first, there is the repository at <ulink url="http://www.linuxprinting.org" ->www.linuxprinting.org</ulink ->, which lets you generate a <quote ->CUPS-O-Matic</quote ->-&PPD; online for any printer that had been supported by traditional &ghostscript; printing already. This helps you to switch over to &CUPS; with little effort, if you wish so. If your printer was doing well with the traditional way of &ghostscript; printing, take CUPS-O-Matic to plug your driver into the &CUPS; system and you'll have the best of both worlds.</para> +<para>first, there is the repository at <ulink url="http://www.linuxprinting.org">www.linuxprinting.org</ulink>, which lets you generate a <quote>CUPS-O-Matic</quote>-&PPD; online for any printer that had been supported by traditional &ghostscript; printing already. This helps you to switch over to &CUPS; with little effort, if you wish so. If your printer was doing well with the traditional way of &ghostscript; printing, take CUPS-O-Matic to plug your driver into the &CUPS; system and you'll have the best of both worlds.</para> </listitem> <listitem> -<para ->second, there are &CUPS;-&PPD;s for the more than 120 printer models, which are driven by the new universal <application ->stp</application -> driver. <application ->stp</application -> (stood originally for Stylus Photo) is now developed by the gimp-print project; it was started by Mike Sweet, the leading &CUPS; developer and is now available through <ulink url="http://gimp-print.sourceforge.net" ->gimp-print.sourceforge.net</ulink ->. This driver prints real Photo quality on many modern inkjets and can be configured to make 120 &CUPS;-&PPD;s along its own compilation. &HP; Laser- and DeskJet, <trademark class="registered" ->Epson</trademark -> Stylus and Photo Colour models as well as some <trademark class="registered" ->Canon</trademark -> and <trademark class="registered" ->Lexmark</trademark -> are covered.</para> +<para>second, there are &CUPS;-&PPD;s for the more than 120 printer models, which are driven by the new universal <application>stp</application> driver. <application>stp</application> (stood originally for Stylus Photo) is now developed by the gimp-print project; it was started by Mike Sweet, the leading &CUPS; developer and is now available through <ulink url="http://gimp-print.sourceforge.net">gimp-print.sourceforge.net</ulink>. This driver prints real Photo quality on many modern inkjets and can be configured to make 120 &CUPS;-&PPD;s along its own compilation. &HP; Laser- and DeskJet, <trademark class="registered">Epson</trademark> Stylus and Photo Colour models as well as some <trademark class="registered">Canon</trademark> and <trademark class="registered">Lexmark</trademark> are covered.</para> </listitem> <listitem> -<para ->third, there is the commercial extension to &CUPS; from the &CUPS; developers themselves: it is called <application ->ESP PrintPro</application -> and comes with more than 2.300 printer drivers. There are even improved imagetoraster and pstoraster filters included.</para> +<para>third, there is the commercial extension to &CUPS; from the &CUPS; developers themselves: it is called <application>ESP PrintPro</application> and comes with more than 2.300 printer drivers. There are even improved imagetoraster and pstoraster filters included.</para> </listitem> </itemizedlist> -<para ->&CUPS; makes it really easy for manufacturers to start supporting &Linux; and &UNIX; printing for their models at reasonably low cost. The modular framework of &CUPS; facilitates to plug in any filter (=driver) with minimal effort and to access and utilise the whole printing framework that &CUPS; is creating.</para> +<para>&CUPS; makes it really easy for manufacturers to start supporting &Linux; and &UNIX; printing for their models at reasonably low cost. The modular framework of &CUPS; facilitates to plug in any filter (=driver) with minimal effort and to access and utilise the whole printing framework that &CUPS; is creating.</para> -<para ->Read more about the exciting &CUPS; features in the available &CUPS; documentation at <ulink url="http://www.cups.org/documentation.html" ->http://www.cups.org/documentation.html</ulink -> and <ulink url="http://wwww.danka.de/printpro/faq.html" ->http://www.danka.de/printpro/faq.html</ulink ->. Also at <ulink url="http://www.linuxprinting.org" ->http://www.linuxprinting.org/</ulink -> is a universal repository for all issues related to &Linux; and &UNIX; printing.</para> +<para>Read more about the exciting &CUPS; features in the available &CUPS; documentation at <ulink url="http://www.cups.org/documentation.html">http://www.cups.org/documentation.html</ulink> and <ulink url="http://wwww.danka.de/printpro/faq.html">http://www.danka.de/printpro/faq.html</ulink>. Also at <ulink url="http://www.linuxprinting.org">http://www.linuxprinting.org/</ulink> is a universal repository for all issues related to &Linux; and &UNIX; printing.</para> </sect2> </sect1> <sect1 id="cups-ipp-support"> -<title ->How &IPP; Support Makes &CUPS; the Best Choice Around</title> +<title>How &IPP; Support Makes &CUPS; the Best Choice Around</title> <sect2> -<title -><quote -><acronym ->LPD</acronym -> Must Die!</quote -></title> - -<para ->For a long time many developers were deeply dissatisfied with good old <acronym ->LPD</acronym ->. Quite a few new projects were started to improve printing: <application ->LPRng</application -> is the best known example. Others are <acronym ->PDQ</acronym ->, <acronym ->PPR</acronym ->, <acronym ->PLP</acronym ->, <acronym ->GNUlpr</acronym -> and <acronym ->RLPR</acronym ->. But none of the new programs were seen as a <quote ->big shot</quote ->; most of them are just implementing the same old <acronym ->LPD</acronym -> specification with a few (or many) new extensions, which again make them incompatible with each other.</para> - -<para ->Having seen the development of not just one, but different viable alternatives to venerable <acronym ->BSD</acronym ->-style <acronym ->LPD</acronym ->, Grant Taylor, author of the <citetitle ->Linux Printing HOWTO</citetitle ->, finally rallied the call <citetitle ->LPD Must Die!</citetitle -> in his <quote ->Campaign To Abolish The Line Printer Daemon</quote ->.</para> +<title><quote><acronym>LPD</acronym> Must Die!</quote></title> + +<para>For a long time many developers were deeply dissatisfied with good old <acronym>LPD</acronym>. Quite a few new projects were started to improve printing: <application>LPRng</application> is the best known example. Others are <acronym>PDQ</acronym>, <acronym>PPR</acronym>, <acronym>PLP</acronym>, <acronym>GNUlpr</acronym> and <acronym>RLPR</acronym>. But none of the new programs were seen as a <quote>big shot</quote>; most of them are just implementing the same old <acronym>LPD</acronym> specification with a few (or many) new extensions, which again make them incompatible with each other.</para> + +<para>Having seen the development of not just one, but different viable alternatives to venerable <acronym>BSD</acronym>-style <acronym>LPD</acronym>, Grant Taylor, author of the <citetitle>Linux Printing HOWTO</citetitle>, finally rallied the call <citetitle>LPD Must Die!</citetitle> in his <quote>Campaign To Abolish The Line Printer Daemon</quote>.</para> <!-- FIXME: look up URLs for the above --> </sect2> <sect2> -<title ->How the &IPP; Came to Be</title> - -<para ->Along with the above, on the industry side of things, there were efforts to overcome the well-known weaknesses of <acronym ->LPD</acronym ->. It started with proprietary extensions to plain old <acronym ->LPD</acronym ->, and stretched as far as &Hewlett-Packard;'s attempt to establish &HP; JetDirect as a new standard for a network printing protocol. The result were even more incompatibilities.</para> - -<para ->In the end, an initiative to define a new common industry and <acronym ->IETF</acronym -> standard took shape. The <quote ->Printer Working Group</quote -> or <acronym ->PWG</acronym ->, a loose aggregation of vendors in hardware, software, and operating systems, drafted the new <quote ->Internet Printing Protocol</quote ->, &IPP;. &IPP; v1.1 has now been approved by the <acronym ->IETF</acronym -> (Internet Engineering Task Force) as a proposed standard, and now enjoys the unanimous support throughout the industry in Europe, USA and Japan. Most current network printer models have now built in &IPP; support on top of traditional <acronym ->LPR</acronym ->/<acronym ->LPD</acronym -> or JetDirect Printing.</para> +<title>How the &IPP; Came to Be</title> + +<para>Along with the above, on the industry side of things, there were efforts to overcome the well-known weaknesses of <acronym>LPD</acronym>. It started with proprietary extensions to plain old <acronym>LPD</acronym>, and stretched as far as &Hewlett-Packard;'s attempt to establish &HP; JetDirect as a new standard for a network printing protocol. The result were even more incompatibilities.</para> + +<para>In the end, an initiative to define a new common industry and <acronym>IETF</acronym> standard took shape. The <quote>Printer Working Group</quote> or <acronym>PWG</acronym>, a loose aggregation of vendors in hardware, software, and operating systems, drafted the new <quote>Internet Printing Protocol</quote>, &IPP;. &IPP; v1.1 has now been approved by the <acronym>IETF</acronym> (Internet Engineering Task Force) as a proposed standard, and now enjoys the unanimous support throughout the industry in Europe, USA and Japan. Most current network printer models have now built in &IPP; support on top of traditional <acronym>LPR</acronym>/<acronym>LPD</acronym> or JetDirect Printing.</para> </sect2> <sect2> -<title ->Why &IPP; is Solving Many Problems</title> +<title>Why &IPP; is Solving Many Problems</title> -<para ->&IPP; promises to solve a lot of problems network administrators face. This trade normally deals with heterogeneous network environments and spends more than half of its working hours dealing with printing problems.</para> +<para>&IPP; promises to solve a lot of problems network administrators face. This trade normally deals with heterogeneous network environments and spends more than half of its working hours dealing with printing problems.</para> -<para ->By creating a unified set of query functions for &IPP; enabled printers and servers, for transferring files and setting job-control attributes &etc;, &IPP; is destined to work across all &OS; platforms. It's rollout however, will not happen overnight, as many legacy print devices will still be in use for many years to come. Therefore, in &IPP; there is a provision made for backwards compatibility of all &IPP; implementations. &CUPS; is proving the viability of &IPP; printing in all environments.</para> +<para>By creating a unified set of query functions for &IPP; enabled printers and servers, for transferring files and setting job-control attributes &etc;, &IPP; is destined to work across all &OS; platforms. It's rollout however, will not happen overnight, as many legacy print devices will still be in use for many years to come. Therefore, in &IPP; there is a provision made for backwards compatibility of all &IPP; implementations. &CUPS; is proving the viability of &IPP; printing in all environments.</para> -<para ->The most striking advantage will be it's integration into the existing set of other robust <acronym ->IP</acronym -> protocols. Being an extension of the proven and robust <acronym ->HTTP</acronym -> 1.1 protocol, for the special task of handling print file and related data, it is also very easy to plug in other standards as they are being developed and deployed:</para> +<para>The most striking advantage will be it's integration into the existing set of other robust <acronym>IP</acronym> protocols. Being an extension of the proven and robust <acronym>HTTP</acronym> 1.1 protocol, for the special task of handling print file and related data, it is also very easy to plug in other standards as they are being developed and deployed:</para> <itemizedlist> <listitem> -<para ->Basic, Digest, and Certificate Authentication for users seeking access to print services.</para> +<para>Basic, Digest, and Certificate Authentication for users seeking access to print services.</para> </listitem> <listitem> -<para ->SSL3 and <acronym ->TLS</acronym -> encryption for transferring data.</para> +<para>SSL3 and <acronym>TLS</acronym> encryption for transferring data.</para> </listitem> <listitem> -<para ->Bi directional communication of clients with print devices, using the <acronym ->HTTP</acronym ->/&IPP; <command ->GET</command -> and <command ->POST</command -> mechanism.</para> +<para>Bi directional communication of clients with print devices, using the <acronym>HTTP</acronym>/&IPP; <command>GET</command> and <command>POST</command> mechanism.</para> </listitem> <listitem> -<para ->LDAP directory service integration to keep a consistent database of available printers, their capabilities and page-costs, &etc;, as well as user passwords, <acronym ->ACL</acronym ->s &etc;.</para> +<para>LDAP directory service integration to keep a consistent database of available printers, their capabilities and page-costs, &etc;, as well as user passwords, <acronym>ACL</acronym>s &etc;.</para> </listitem> <listitem> -<para -><quote ->Pull</quote -> (as opposed to the usual <quote ->Push</quote -> model) printing, where a server or printer just needs to be told the &URL; of a document, whereupon it is retrieved from the resource on the internet and printed.</para> +<para><quote>Pull</quote> (as opposed to the usual <quote>Push</quote> model) printing, where a server or printer just needs to be told the &URL; of a document, whereupon it is retrieved from the resource on the internet and printed.</para> </listitem> </itemizedlist> @@ -539,147 +264,63 @@ format="PNG"/></imageobject> <!-- <sect2> -<title ->&CUPS;, &IPP; and &kde;</title> +<title>&CUPS;, &IPP; and &kde;</title> -<para ->&CUPS; is the most advanced implementation of &IPP; on all &OS; +<para>&CUPS; is the most advanced implementation of &IPP; on all &OS; platforms. That makes &CUPS; a crucial ally to help "conquer the desktop" for projects like &kde;. &tdeprint; is the best utility to make &CUPS; core functionality available to &kde; Desktop users.</para> -</sect2 -> --> +</sect2> --> <sect2> -<title ->Printer <quote ->Plug'n'Play</quote -> for Clients</title> - -<para ->Have you ever seen a demonstration about &CUPS; capabilities in the network? You must have been quite impressed if you didn't know in advance what to expect.</para> - -<para ->Imagine you as the administrator of a <quote ->LAN</quote ->. For testing purposes you fully installed one &kde;/&CUPS; box on your net, complete with a dozen printers configured and functional: &PostScript;, LaserJets, InkJets and BubbleJets, and so on. Your &kde; users on that box are very happy, they can print like never before, <quote ->ringing all the bells and whistles</quote -> of every printer. It took you 2 hours to make everything run perfectly... and now all the other 100 users on the network want the same. Two hours again for every box? No way you could do that before next year, you think?</para> - -<para ->Wrong. Just change one setting in the original &CUPS; box to make it a <quote ->server</quote ->. Install &CUPS; on five other boxes, as <quote ->clients</quote ->. By the time you turn back to your first client, you find the users happily playing with the settings for the dozen printers you had defined earlier on the <quote ->server</quote ->. Somehow magically the printers had appeared on all the <quote ->Print</quote -> dialogues of the five new &CUPS; client boxes.</para> - -<para ->Your users print, but not a single driver had been installed on the clients, nor a printer queue defined.</para> - -<para ->So, how does this magic work?</para> +<title>Printer <quote>Plug'n'Play</quote> for Clients</title> + +<para>Have you ever seen a demonstration about &CUPS; capabilities in the network? You must have been quite impressed if you didn't know in advance what to expect.</para> + +<para>Imagine you as the administrator of a <quote>LAN</quote>. For testing purposes you fully installed one &kde;/&CUPS; box on your net, complete with a dozen printers configured and functional: &PostScript;, LaserJets, InkJets and BubbleJets, and so on. Your &kde; users on that box are very happy, they can print like never before, <quote>ringing all the bells and whistles</quote> of every printer. It took you 2 hours to make everything run perfectly... and now all the other 100 users on the network want the same. Two hours again for every box? No way you could do that before next year, you think?</para> + +<para>Wrong. Just change one setting in the original &CUPS; box to make it a <quote>server</quote>. Install &CUPS; on five other boxes, as <quote>clients</quote>. By the time you turn back to your first client, you find the users happily playing with the settings for the dozen printers you had defined earlier on the <quote>server</quote>. Somehow magically the printers had appeared on all the <quote>Print</quote> dialogues of the five new &CUPS; client boxes.</para> + +<para>Your users print, but not a single driver had been installed on the clients, nor a printer queue defined.</para> + +<para>So, how does this magic work?</para> </sect2> <sect2> -<title -><quote ->Seeing</quote -> Printers Not Installed Locally?</title> - -<para ->The answer is not complicated at all.</para> - -<para ->If a &CUPS; server is on the <acronym ->LAN</acronym ->, it broadcasts the names of all available printers to the <acronym ->LAN</acronym ->, using the <acronym ->UDP</acronym -> protocol and port 631. Port 631 is reserved as a <quote ->well-known port</quote -> by <acronym ->IANA</acronym -> (the <quote ->Internet Assigning Numbers Authority</quote ->) for &IPP; purposes. All &CUPS; clients listen to &CUPS; server info sent to their port 631. That's how they know about available printers, and that's how they learn about the <quote ->path</quote -> to the printers as well.</para> - -<para ->Using &IPP;, which is really a clever extension to <acronym ->HTTP</acronym -> v1.1, &CUPS; is able to address all objects related to the printing system via <quote ->Universal Resource Locators</quote -> or <acronym ->URL</acronym ->s. Print jobs to be deleted or restarted, printers to be queried or modified, admin tasks to be performed on the server, with &IPP; and &CUPS;, everything is addressable by a certain <acronym ->URL</acronym ->. Many important things can be done through the web interface to &CUPS;, accessible for example with &konqueror;.</para> +<title><quote>Seeing</quote> Printers Not Installed Locally?</title> + +<para>The answer is not complicated at all.</para> + +<para>If a &CUPS; server is on the <acronym>LAN</acronym>, it broadcasts the names of all available printers to the <acronym>LAN</acronym>, using the <acronym>UDP</acronym> protocol and port 631. Port 631 is reserved as a <quote>well-known port</quote> by <acronym>IANA</acronym> (the <quote>Internet Assigning Numbers Authority</quote>) for &IPP; purposes. All &CUPS; clients listen to &CUPS; server info sent to their port 631. That's how they know about available printers, and that's how they learn about the <quote>path</quote> to the printers as well.</para> + +<para>Using &IPP;, which is really a clever extension to <acronym>HTTP</acronym> v1.1, &CUPS; is able to address all objects related to the printing system via <quote>Universal Resource Locators</quote> or <acronym>URL</acronym>s. Print jobs to be deleted or restarted, printers to be queried or modified, admin tasks to be performed on the server, with &IPP; and &CUPS;, everything is addressable by a certain <acronym>URL</acronym>. Many important things can be done through the web interface to &CUPS;, accessible for example with &konqueror;.</para> </sect2> <sect2> -<title ->Printing Without Installing a Driver</title> - -<para ->And more, the clients basically can <quote ->administer</quote -> and <quote ->use</quote -> any printer they see, just as if it was a locally installed one. Of course, you can set restrictions on it with access control lists &etc;, so that not <emphasis ->any</emphasis -> clients may use <emphasis ->any</emphasis -> printer as it likes.</para> - -<para ->The clients even are able to print without the appropriate filter (or driver) installed locally.</para> - -<para ->So how does this work? If a client wants to know about and select printer-specific options, it sends a request (called <command ->CUPS-get-ppd</command ->) to the server. The server tells the client all about all printer-specific options, as read from the server side &PPD;. The user on the client side can see the options and select the required ones. He then sends the print file, usually unfiltered <quote ->raw</quote -> &PostScript;, spiced up with the printer-options to the printer server, using &IPP; as the transport protocol. All further processing, especially the filtering to generate the final format for the target printer, is then done by the server. The server has the necessary programs (<quote ->drivers</quote -> or <quote ->filters</quote ->) to do this.</para> - -<para ->This way a client prints without needing to install a driver locally.</para> - -<para ->Any change on the server, such as adding or modifying a printer, is instantly <quote ->known</quote -> to the clients with no further configuration.</para> +<title>Printing Without Installing a Driver</title> + +<para>And more, the clients basically can <quote>administer</quote> and <quote>use</quote> any printer they see, just as if it was a locally installed one. Of course, you can set restrictions on it with access control lists &etc;, so that not <emphasis>any</emphasis> clients may use <emphasis>any</emphasis> printer as it likes.</para> + +<para>The clients even are able to print without the appropriate filter (or driver) installed locally.</para> + +<para>So how does this work? If a client wants to know about and select printer-specific options, it sends a request (called <command>CUPS-get-ppd</command>) to the server. The server tells the client all about all printer-specific options, as read from the server side &PPD;. The user on the client side can see the options and select the required ones. He then sends the print file, usually unfiltered <quote>raw</quote> &PostScript;, spiced up with the printer-options to the printer server, using &IPP; as the transport protocol. All further processing, especially the filtering to generate the final format for the target printer, is then done by the server. The server has the necessary programs (<quote>drivers</quote> or <quote>filters</quote>) to do this.</para> + +<para>This way a client prints without needing to install a driver locally.</para> + +<para>Any change on the server, such as adding or modifying a printer, is instantly <quote>known</quote> to the clients with no further configuration.</para> </sect2> <sect2> -<title -><quote ->Zero Administration</quote ->, Load Balancing, and <quote ->Failover Switching</quote -></title> - -<para ->Some other advanced features built into &CUPS; are the capacity to do <quote ->load balancing</quote ->.</para> - -<para ->If you define the same printer queues on two or more different servers, the clients will send their jobs to the first responding or available server. This implies an automatic load balancing amongst servers. If you have to take one server off the network for maintenance, the others will just take over its tasks without the users even noticing the difference.</para> +<title><quote>Zero Administration</quote>, Load Balancing, and <quote>Failover Switching</quote></title> + +<para>Some other advanced features built into &CUPS; are the capacity to do <quote>load balancing</quote>.</para> + +<para>If you define the same printer queues on two or more different servers, the clients will send their jobs to the first responding or available server. This implies an automatic load balancing amongst servers. If you have to take one server off the network for maintenance, the others will just take over its tasks without the users even noticing the difference.</para> </sect2> |