summaryrefslogtreecommitdiffstats
path: root/tde-i18n-se
diff options
context:
space:
mode:
Diffstat (limited to 'tde-i18n-se')
-rw-r--r--tde-i18n-se/messages/tdelibs/kio.po118
-rw-r--r--tde-i18n-se/messages/tdelibs/tdelibs.po216
-rw-r--r--tde-i18n-se/messages/tdelibs/tdeprint.po232
3 files changed, 283 insertions, 283 deletions
diff --git a/tde-i18n-se/messages/tdelibs/kio.po b/tde-i18n-se/messages/tdelibs/kio.po
index 24fe098d6ed..49237cdc73f 100644
--- a/tde-i18n-se/messages/tdelibs/kio.po
+++ b/tde-i18n-se/messages/tdelibs/kio.po
@@ -401,11 +401,11 @@ msgstr ""
#: kio/tcpslavebase.cpp:1008
msgid ""
-"SSL certificate is being rejected as requested. You can disable this in the KDE "
+"SSL certificate is being rejected as requested. You can disable this in the TDE "
"Control Center."
msgstr ""
"SSL-sertifikáhtta hilgojuvvui. Sáhtát rievdadit heivehusaid "
-"KDE-stivrenguovddážis."
+"TDE-stivrenguovddážis."
#: kio/tcpslavebase.cpp:1020
msgid "Co&nnect"
@@ -1204,11 +1204,11 @@ msgstr ""
#: kio/global.cpp:586
msgid ""
-"When all else fails, please consider helping the KDE team or the third party "
+"When all else fails, please consider helping the TDE team or the third party "
"maintainer of this software by submitting a high quality bug report. If the "
"software is provided by a third party, please contact them directly. Otherwise, "
"first look to see if the same bug has been submitted by someone else by "
-"searching at the <a href=\"http://bugs.kde.org/\">KDE bug reporting website</a>"
+"searching at the <a href=\"http://bugs.kde.org/\">TDE bug reporting website</a>"
". If not, take note of the details given above, and include them in your bug "
"report, along with as many other details as you think might help."
msgstr ""
@@ -1306,7 +1306,7 @@ msgstr ""
#: kio/global.cpp:637
msgid ""
"The program which provides compatibility with this protocol may not have been "
-"updated with your last update of KDE. This can cause the program to be "
+"updated with your last update of TDE. This can cause the program to be "
"incompatible with the current version and thus not start."
msgstr ""
@@ -1342,10 +1342,10 @@ msgstr "Protokolla %1 ii dorjojuvo"
#: kio/global.cpp:665
msgid ""
-"The protocol <strong>%1</strong> is not supported by the KDE programs currently "
+"The protocol <strong>%1</strong> is not supported by the TDE programs currently "
"installed on this computer."
msgstr ""
-"KDE-prográmmat mat leat sajáiduhttojuvvon dán dihtorii eai doarjjo <strong>"
+"TDE-prográmmat mat leat sajáiduhttojuvvon dán dihtorii eai doarjjo <strong>"
"%1</strong> protokolla."
#: kio/global.cpp:668
@@ -1361,7 +1361,7 @@ msgstr ""
#: kio/global.cpp:671
msgid ""
-"You may perform a search on the Internet for a KDE program (called a kioslave "
+"You may perform a search on the Internet for a TDE program (called a kioslave "
"or ioslave) which supports this protocol. Places to search include <a "
"href=\"http://kde-apps.org/\">http://kde-apps.org/</a> "
"and <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
@@ -1383,7 +1383,7 @@ msgstr ""
#: kio/global.cpp:685
msgid ""
-"KDE is able to communicate through a protocol within a protocol; the protocol "
+"TDE is able to communicate through a protocol within a protocol; the protocol "
"specified is only for use in such situations, however this is not one of these "
"situations. This is a rare event, and is likely to indicate a programming "
"error."
@@ -1396,16 +1396,16 @@ msgstr "Doarjjakeahtes doaibma: %1"
#: kio/global.cpp:694
msgid ""
-"The requested action is not supported by the KDE program which is implementing "
+"The requested action is not supported by the TDE program which is implementing "
"the <strong>%1</strong> protocol."
msgstr ""
-"KDE-prográmma mii implementere <strong>%1</strong>-protokolla ii doarjjo "
+"TDE-prográmma mii implementere <strong>%1</strong>-protokolla ii doarjjo "
"doaimma."
#: kio/global.cpp:697
msgid ""
-"This error is very much dependent on the KDE program. The additional "
-"information should give you more information than is available to the KDE "
+"This error is very much dependent on the TDE program. The additional "
+"information should give you more information than is available to the TDE "
"input/output architecture."
msgstr ""
@@ -1556,7 +1556,7 @@ msgstr "Protokolla %1 ii leat fiilavuogádat"
#: kio/global.cpp:792
msgid ""
"This means that a request was made which requires determining the contents of "
-"the folder, and the KDE program supporting this protocol is unable to do so."
+"the folder, and the TDE program supporting this protocol is unable to do so."
msgstr ""
#: kio/global.cpp:800
@@ -1566,12 +1566,12 @@ msgstr "Syklalaš liŋka gávdnui"
#: kio/global.cpp:801
msgid ""
"UNIX environments are commonly able to link a file or folder to a separate name "
-"and/or location. KDE detected a link or series of links that results in an "
+"and/or location. TDE detected a link or series of links that results in an "
"infinite loop - i.e. the file was (perhaps in a roundabout way) linked to "
"itself."
msgstr ""
"UNIX-birrasiin lea vejolaš leŋket fiillaid dahje máhpaid eará nammii ja/dahje "
-"báikái. KDE gávnnai liŋka dahje liŋkavidji mii lea ágalaš fárfu. Fiila lea dán "
+"báikái. TDE gávnnai liŋka dahje liŋkavidji mii lea ágalaš fárfu. Fiila lea dán "
"láhkái (varra gávččaldaga bokte) leŋkejuvvon alccesis."
#: kio/global.cpp:805 kio/global.cpp:827
@@ -1599,12 +1599,12 @@ msgstr "Syklalaš liŋka gávdnui máŋgedettiin"
#: kio/global.cpp:822
msgid ""
"UNIX environments are commonly able to link a file or folder to a separate name "
-"and/or location. During the requested copy operation, KDE detected a link or "
+"and/or location. During the requested copy operation, TDE detected a link or "
"series of links that results in an infinite loop - i.e. the file was (perhaps "
"in a roundabout way) linked to itself."
msgstr ""
"UNIX-birrasiin lea vejolaš leŋket fiillaid dahje máhpaid eará nammii ja/dahje "
-"báikái. KDE gávnnai liŋka dahje liŋkavidji mii lea ágalaš fárfu. Fiila lea dán "
+"báikái. TDE gávnnai liŋka dahje liŋkavidji mii lea ágalaš fárfu. Fiila lea dán "
"láhkái (varra gávččaldaga bokte) leŋkejuvvon alccesis."
#: kio/global.cpp:832
@@ -1702,7 +1702,7 @@ msgstr ""
#: kio/global.cpp:873
msgid ""
-"KDE is able to communicate through a protocol within a protocol. This request "
+"TDE is able to communicate through a protocol within a protocol. This request "
"specified a protocol be used as such, however this protocol is not capable of "
"such an action. This is a rare event, and is likely to indicate a programming "
"error."
@@ -2024,13 +2024,13 @@ msgstr "Autentiseren filtii: %1-vuohki ii dorjojuvvo"
msgid ""
"Although you may have supplied the correct authentication details, the "
"authentication failed because the method that the server is using is not "
-"supported by the KDE program implementing the protocol %1."
+"supported by the TDE program implementing the protocol %1."
msgstr ""
#: kio/global.cpp:1101
msgid ""
"Please file a bug at <a href=\"http://bugs.kde.org/\">http://bugs.kde.org/</a> "
-"to inform the KDE team of the unsupported authentication method."
+"to inform the TDE team of the unsupported authentication method."
msgstr ""
#: kio/global.cpp:1107
@@ -2075,7 +2075,7 @@ msgid ""
"<li>Timeout for establishing a connection: %1 seconds</li>"
"<li>Timeout for receiving a response: %2 seconds</li>"
"<li>Timeout for accessing proxy servers: %3 seconds</li></ul>"
-"Please note that you can alter these timeout settings in the KDE Control "
+"Please note that you can alter these timeout settings in the TDE Control "
"Center, by selecting Network -> Preferences."
msgstr ""
@@ -2376,8 +2376,8 @@ msgid "&Edit..."
msgstr "&Doaimmat …"
#: kio/kmimetypechooser.cpp:104
-msgid "Click this button to display the familiar KDE mime type editor."
-msgstr "Coahkkal dán boalu doaimmahandihte KDE:a mime-šlájaid."
+msgid "Click this button to display the familiar TDE mime type editor."
+msgstr "Coahkkal dán boalu doaimmahandihte TDE:a mime-šlájaid."
#: kssl/ksslcertdlg.cc:61
msgid "Certificate"
@@ -2397,8 +2397,8 @@ msgid "Do not send a certificate"
msgstr "Ale sádde duođaštusa"
#: kssl/ksslcertdlg.cc:84
-msgid "KDE SSL Certificate Dialog"
-msgstr "KDE SSL-duođaštanláseš"
+msgid "TDE SSL Certificate Dialog"
+msgstr "TDE SSL-duođaštanláseš"
#: kssl/ksslcertdlg.cc:139
msgid ""
@@ -2515,24 +2515,24 @@ msgid "GMT"
msgstr "GMT"
#: kssl/ksslkeygen.cc:48
-msgid "KDE Certificate Request"
-msgstr "KDE-duođaštus jearahus"
+msgid "TDE Certificate Request"
+msgstr "TDE-duođaštus jearahus"
#: kssl/ksslkeygen.cc:50
-msgid "KDE Certificate Request - Password"
-msgstr "KDE-duođaštus jearahus – Beassansátni"
+msgid "TDE Certificate Request - Password"
+msgstr "TDE-duođaštus jearahus – Beassansátni"
#: kssl/ksslkeygen.cc:93
msgid "Unsupported key size."
msgstr "Doarjjakeahtes čoavddasturrodat."
#: kssl/ksslinfodlg.cc:120 kssl/ksslkeygen.cc:93
-msgid "KDE SSL Information"
-msgstr "KDE SSL-dieđut"
+msgid "TDE SSL Information"
+msgstr "TDE SSL-dieđut"
#: kssl/ksslkeygen.cc:97 misc/uiserver.cpp:1383
-msgid "KDE"
-msgstr "KDE"
+msgid "TDE"
+msgstr "TDE"
#: kssl/ksslkeygen.cc:97
msgid "Please wait while the encryption keys are generated..."
@@ -2583,7 +2583,7 @@ msgid "Current connection is not secured with SSL."
msgstr "Dát oktavuohta ii leat sihkeraston SSL:ain."
#: kssl/ksslinfodlg.cc:99
-msgid "SSL support is not available in this build of KDE."
+msgid "SSL support is not available in this build of TDE."
msgstr ""
#: kssl/ksslinfodlg.cc:109
@@ -2765,7 +2765,7 @@ msgstr ""
#: misc/kfile/fileprops.cpp:240
msgid ""
-"Opens a KDE properties dialog to allow viewing and modifying of metadata of the "
+"Opens a TDE properties dialog to allow viewing and modifying of metadata of the "
"given file(s)"
msgstr ""
@@ -2816,10 +2816,10 @@ msgstr "Ii sáhte mearridit metadáhtaid"
#: misc/kwalletd/kwalletd.cpp:400
msgid ""
-"<qt>KDE has requested to open the wallet '<b>%1</b>'. Please enter the password "
+"<qt>TDE has requested to open the wallet '<b>%1</b>'. Please enter the password "
"for this wallet below."
msgstr ""
-"<qt>KDE hálidivččii rahpat burssa «%1». Čális burssa beassansáni dás "
+"<qt>TDE hálidivččii rahpat burssa «%1». Čális burssa beassansáni dás "
"vuolábealde."
#: misc/kwalletd/kwalletd.cpp:402
@@ -2835,21 +2835,21 @@ msgstr "&Raba"
#: misc/kwalletd/kwalletd.cpp:414
msgid ""
-"KDE has requested to open the wallet. This is used to store sensitive data in a "
+"TDE has requested to open the wallet. This is used to store sensitive data in a "
"secure fashion. Please enter a password to use with this wallet or click cancel "
"to deny the application's request."
msgstr ""
#: misc/kwalletd/kwalletd.cpp:416
msgid ""
-"<qt>The application '<b>%1</b>' has requested to open the KDE wallet. This is "
+"<qt>The application '<b>%1</b>' has requested to open the TDE wallet. This is "
"used to store sensitive data in a secure fashion. Please enter a password to "
"use with this wallet or click cancel to deny the application's request."
msgstr ""
#: misc/kwalletd/kwalletd.cpp:423
msgid ""
-"<qt>KDE has requested to create a new wallet named '<b>%1</b>"
+"<qt>TDE has requested to create a new wallet named '<b>%1</b>"
"'. Please choose a password for this wallet, or cancel to deny the "
"application's request."
msgstr ""
@@ -2868,8 +2868,8 @@ msgstr "&Ráhkat"
#: misc/kwalletd/kwalletd.cpp:432 misc/kwalletd/kwalletd.cpp:607
#: misc/kwalletd/kwalletd.cpp:623 misc/kwalletd/kwalletd.cpp:634
#: misc/kwalletd/kwalletd.cpp:639 misc/kwalletd/kwalletd.cpp:1157
-msgid "KDE Wallet Service"
-msgstr "KDE-bursabálvalus"
+msgid "TDE Wallet Service"
+msgstr "TDE-bursabálvalus"
#: misc/kwalletd/kwalletd.cpp:444
msgid ""
@@ -2878,7 +2878,7 @@ msgid ""
msgstr ""
#: misc/kwalletd/kwalletd.cpp:518
-msgid "<qt>KDE has requested access to the open wallet '<b>%1</b>'."
+msgid "<qt>TDE has requested access to the open wallet '<b>%1</b>'."
msgstr ""
#: misc/kwalletd/kwalletd.cpp:520
@@ -3087,7 +3087,7 @@ msgid ""
msgstr ""
#: misc/uiserver.cpp:1384
-msgid "KDE Progress Information UI Server"
+msgid "TDE Progress Information UI Server"
msgstr ""
#: misc/uiserver.cpp:1387 misc/uiserver.cpp:1388
@@ -3932,7 +3932,7 @@ msgid ""
"already exist). This extension is based on the file type that you have chosen "
"to save in."
"<br>"
-"<br>If you do not want KDE to supply an extension for the filename, you can "
+"<br>If you do not want TDE to supply an extension for the filename, you can "
"either turn this option off or you can suppress it by adding a period (.) to "
"the end of the filename (the period will be automatically removed).</li></ol>"
"If unsure, keep this option enabled as it makes your files more manageable."
@@ -3943,7 +3943,7 @@ msgid ""
"<qt>This button allows you to bookmark specific locations. Click on this button "
"to open the bookmark menu where you may add, edit or select a bookmark."
"<p>These bookmarks are specific to the file dialog, but otherwise operate like "
-"bookmarks elsewhere in KDE.</qt>"
+"bookmarks elsewhere in TDE.</qt>"
msgstr ""
#: kfile/kfileiconview.cpp:62
@@ -4922,8 +4922,8 @@ msgstr ""
#. i18n: file ./misc/kwalletd/kwalletwizard.ui line 16
#: rc.cpp:15
#, no-c-format
-msgid "KDE Wallet Wizard"
-msgstr "Ofeláš KDE-burssa várás"
+msgid "TDE Wallet Wizard"
+msgstr "Ofeláš TDE-burssa várás"
#. i18n: file ./misc/kwalletd/kwalletwizard.ui line 23
#: rc.cpp:18
@@ -4934,19 +4934,19 @@ msgstr "Oahpástuvvan"
#. i18n: file ./misc/kwalletd/kwalletwizard.ui line 56
#: rc.cpp:21
#, no-c-format
-msgid "<u>KWallet</u> - The KDE Wallet System"
-msgstr "<u>KWallet</u> – KDE-bursavuogádat"
+msgid "<u>KWallet</u> - The TDE Wallet System"
+msgstr "<u>KWallet</u> – TDE-bursavuogádat"
#. i18n: file ./misc/kwalletd/kwalletwizard.ui line 81
#: rc.cpp:24
#, no-c-format
msgid ""
-"Welcome to KWallet, the KDE Wallet System. KWallet allows you to store your "
+"Welcome to KWallet, the TDE Wallet System. KWallet allows you to store your "
"passwords and other personal information on disk in an encrypted file, "
"preventing others from viewing the information. This wizard will tell you "
"about KWallet and help you configure it for the first time."
msgstr ""
-"Bures boahttin KWallet:ii, KDE:a bursavuogádat. KWallet:iin sáhtát vurket iežat "
+"Bures boahttin KWallet:ii, TDE:a bursavuogádat. KWallet:iin sáhtát vurket iežat "
"beassansániid ja eará persuvnnalaš dieđuid skearrui krypterejuvvon fiilii. Dán "
"láhkai eastadat eastadat earáid lohkat dáid dieđuid (iige rootge). Dát ofelaš "
"addá dieđuid KWallet:a birra ja veahkeha du heivehit prográmma dál go geavahat "
@@ -4968,7 +4968,7 @@ msgstr "&Erenoamáš heivehusat"
#: rc.cpp:36
#, no-c-format
msgid ""
-"The KDE Wallet system stores your data in a <i>wallet</i> "
+"The TDE Wallet system stores your data in a <i>wallet</i> "
"file on your local hard disk. The data is only written in encrypted form, "
"presently using the blowfish algorithm with your password as the key. When a "
"wallet is opened, the wallet manager application will launch and display an "
@@ -4987,7 +4987,7 @@ msgstr "Vállje beassansáni"
#: rc.cpp:42
#, no-c-format
msgid ""
-"Various applications may attempt to use the KDE wallet to store passwords or "
+"Various applications may attempt to use the TDE wallet to store passwords or "
"other information such as web form data and cookies. If you would like these "
"applications to use the wallet, you must enable it now and choose a password. "
"The password you choose <i>cannot</i> be recovered if it is lost, and will "
@@ -5010,8 +5010,8 @@ msgstr "Nanne beassansáni:"
#. i18n: file ./misc/kwalletd/kwalletwizard.ui line 301
#: rc.cpp:51
#, no-c-format
-msgid "Yes, I wish to use the KDE wallet to store my personal information."
-msgstr "Juo, mun hálidan vurket peršuvnnalaš dieđuid KDE-bursii."
+msgid "Yes, I wish to use the TDE wallet to store my personal information."
+msgstr "Juo, mun hálidan vurket peršuvnnalaš dieđuid TDE-bursii."
#. i18n: file ./misc/kwalletd/kwalletwizard.ui line 390
#: rc.cpp:54
@@ -5023,7 +5023,7 @@ msgstr "Sihkkarvuohtadássi"
#: rc.cpp:57
#, no-c-format
msgid ""
-"The KDE Wallet system allows you to control the level of security of your "
+"The TDE Wallet system allows you to control the level of security of your "
"personal data. Some of these settings do impact usability. While the default "
"settings are generally acceptable for most users, you may wish to change some "
"of them. You may further tune these settings from the KWallet control module."
@@ -5713,7 +5713,7 @@ msgstr "Ii sáhttán lohkat %1"
#: ../kioslave/http/http_cache_cleaner.cpp:53
#: ../kioslave/http/http_cache_cleaner.cpp:194
-msgid "KDE HTTP cache maintenance tool"
+msgid "TDE HTTP cache maintenance tool"
msgstr ""
#: ../kioslave/http/http_cache_cleaner.cpp:59
diff --git a/tde-i18n-se/messages/tdelibs/tdelibs.po b/tde-i18n-se/messages/tdelibs/tdelibs.po
index 5ba6e6fdd1e..62c54352c66 100644
--- a/tde-i18n-se/messages/tdelibs/tdelibs.po
+++ b/tde-i18n-se/messages/tdelibs/tdelibs.po
@@ -583,7 +583,7 @@ msgstr "Ale beroš sánin mas leat &stuorra bustávat"
#, no-c-format
msgid ""
"If checked, words that consist of only uppercase letters are not spell checked. "
-"This is useful if you have a lot of acronyms, such as KDE for example."
+"This is useful if you have a lot of acronyms, such as TDE for example."
msgstr ""
#. i18n: file ./kspell2/ui/configui.ui line 67
@@ -661,7 +661,7 @@ msgstr ""
#. i18n: file ./dnssd/kcm_kdnssd.kcfg line 19
#: rc.cpp:455
#, no-c-format
-msgid "Removed in KDE 3.5.0"
+msgid "Removed in TDE 3.5.0"
msgstr ""
#. i18n: file ./dnssd/kcm_kdnssd.kcfg line 25
@@ -1600,8 +1600,8 @@ msgid "Unable find script \"%1\"."
msgstr "Ii gávnna skripta «%1»."
#: interfaces/kscript/scriptloader.cpp:40
-msgid "KDE Scripts"
-msgstr "KDE-skriptat"
+msgid "TDE Scripts"
+msgstr "TDE-skriptat"
#: arts/kde/kvideowidget.cpp:82
msgid "Video Toolbar"
@@ -2402,19 +2402,19 @@ msgstr "Ii sáhttán merket fállomerkoša «%1»"
#: kded/kde-menu.cpp:111
msgid ""
-"KDE Menu query tool.\n"
+"TDE Menu query tool.\n"
"This tool can be used to find in which menu a specific application is shown.\n"
"The --highlight option can be used to visually indicate to the user where\n"
-"in the KDE menu a specific application is located."
+"in the TDE menu a specific application is located."
msgstr ""
-"KDE-fállojearahanreaidu\n"
+"TDE-fállojearahanreaidu\n"
"Dáinna reaidduin sáhtát gávdnat gos fálus muhton prográmma lea.\n"
-"Jos vel lasihat --highlight molssaeavttu de merkejuvvo gos KDE-fálus prográmma "
+"Jos vel lasihat --highlight molssaeavttu de merkejuvvo gos TDE-fálus prográmma "
"lea."
#: kded/kde-menu.cpp:116
msgid "kde-menu"
-msgstr "KDE-fállu"
+msgstr "TDE-fállu"
#: kded/kbuildsycoca.cpp:724 kded/kbuildsycoca.cpp:725 kded/kde-menu.cpp:119
#: kded/khostname.cpp:362 tdeui/kaboutdialog.cpp:90
@@ -2466,20 +2466,20 @@ msgid "KDontChangeTheHostName"
msgstr "KDontChangeTheHostName"
#: kded/khostname.cpp:360
-msgid "Informs KDE about a change in hostname"
-msgstr "Dieđiha KDE:ii guossoheaddjenama rievdadusa birra"
+msgid "Informs TDE about a change in hostname"
+msgstr "Dieđiha TDE:ii guossoheaddjenama rievdadusa birra"
#: kded/kded.cpp:720
msgid "Check Sycoca database only once"
msgstr "Dárkkis Sycoca-diehtovuođu dušše oktii."
#: kded/kded.cpp:860
-msgid "KDE Daemon"
-msgstr "KDE Daemon"
+msgid "TDE Daemon"
+msgstr "TDE Daemon"
#: kded/kded.cpp:862
-msgid "KDE Daemon - triggers Sycoca database updates when needed"
-msgstr "KDE Daemon – ođasmahtá Sycoca diehtovuođu go dárbbašuvvo."
+msgid "TDE Daemon - triggers Sycoca database updates when needed"
+msgstr "TDE Daemon – ođasmahtá Sycoca diehtovuođu go dárbbašuvvo."
#: kded/kbuildsycoca.cpp:483
msgid ""
@@ -2546,16 +2546,16 @@ msgid "Rebuilds the system configuration cache."
msgstr "Hukse vuogádatdiehtovuorká ođđasit"
#: kded/kbuildsycoca.cpp:750
-msgid "Reloading KDE configuration, please wait..."
-msgstr "Viežžamin KDE-heivehusa ođđasit, vuorddeš …"
+msgid "Reloading TDE configuration, please wait..."
+msgstr "Viežžamin TDE-heivehusa ođđasit, vuorddeš …"
#: kded/kbuildsycoca.cpp:751
-msgid "KDE Configuration Manager"
-msgstr "KDE heivehusgieđahalli"
+msgid "TDE Configuration Manager"
+msgstr "TDE heivehusgieđahalli"
#: kded/kbuildsycoca.cpp:753
-msgid "Do you want to reload KDE configuration?"
-msgstr "Háliidatgo viežžat KDE-heivehusa ođđasit?"
+msgid "Do you want to reload TDE configuration?"
+msgstr "Háliidatgo viežžat TDE-heivehusa ođđasit?"
#: kded/kbuildsycoca.cpp:753
msgid "Do Not Reload"
@@ -2741,8 +2741,8 @@ msgid "The library %1 does not offer an %2 function."
msgstr "Bibliotehka %1 ii fala %2-doaimma."
#: tdecore/klibloader.cpp:168
-msgid "The library %1 does not offer a KDE compatible factory."
-msgstr "Bibliotehka %1 ii fala KDE-heivvolaš fabrihkaid."
+msgid "The library %1 does not offer a TDE compatible factory."
+msgstr "Bibliotehka %1 ii fala TDE-heivvolaš fabrihkaid."
#: tdecore/klibloader.cpp:425
msgid "Library files for \"%1\" not found in paths."
@@ -2757,11 +2757,11 @@ msgstr "LTR"
#: tdecore/kapplication.cpp:1404
msgid ""
-"There was an error setting up inter-process communications for KDE. The message "
+"There was an error setting up inter-process communications for TDE. The message "
"returned by the system was:\n"
"\n"
msgstr ""
-"Šattai meattáhus ráhkadettiin proseassaidgaskasaš oktavuođa KDE ovddas.\n"
+"Šattai meattáhus ráhkadettiin proseassaidgaskasaš oktavuođa TDE ovddas.\n"
"Vuogádat attii dán dieđáhusa:\n"
#: tdecore/kapplication.cpp:1408
@@ -2943,11 +2943,11 @@ msgstr "Ii sáhttán álggahit veahkkeguovddáža"
#: tdecore/kapplication.cpp:2245 tdecore/kapplication.cpp:2280
#, c-format
msgid ""
-"Could not launch the KDE Help Center:\n"
+"Could not launch the TDE Help Center:\n"
"\n"
"%1"
msgstr ""
-"Ii sáhttán álggahit KDE veahkkeguovddáža:\n"
+"Ii sáhttán álggahit TDE veahkkeguovddáža:\n"
"\n"
"%1"
@@ -4191,13 +4191,13 @@ msgstr "Adar II"
#: tdecore/kaboutdata.cpp:388
msgid ""
"_: replace this with information about your translation team\n"
-"<p>KDE is translated into many languages thanks to the work of the translation "
+"<p>TDE is translated into many languages thanks to the work of the translation "
"teams all over the world.</p>"
-"<p>For more information on KDE internationalization visit <a "
+"<p>For more information on TDE internationalization visit <a "
"href=\"http://l10n.kde.org\">http://l10n.kde.org</a></p>"
msgstr ""
-"<p>KDE lea jorgaluvvon máŋggaid gielaide máŋggain jorgalanjoavkkuid miehttá "
-"máilmmis. Jos háliidat eanet dieđuid KDE «internationalization» birra, fina <a "
+"<p>TDE lea jorgaluvvon máŋggaid gielaide máŋggain jorgalanjoavkkuid miehttá "
+"máilmmis. Jos háliidat eanet dieđuid TDE «internationalization» birra, fina <a "
"href=\"http://l10n.kde.org\">http://l10n.kde.org</a> báikkis.</p> "
"<p>Skolelinux prošeakta álggahii davvisámegieljorgalusaid. Gielda- ja "
"guovlodepartemaŋŋa juolludii golggotmánus, 2002, ruđaid dán jorgalanprošektii. "
@@ -4282,8 +4282,8 @@ msgid "Code generation options file"
msgstr ""
#: tdecore/kconfig_compiler/kconfig_compiler.cpp:955
-msgid "KDE .kcfg compiler"
-msgstr "KDE .kcfg-kompiláhtor"
+msgid "TDE .kcfg compiler"
+msgstr "TDE .kcfg-kompiláhtor"
#: tdecore/kconfig_compiler/kconfig_compiler.cpp:956
msgid "KConfig Compiler"
@@ -5457,30 +5457,30 @@ msgstr "Luoitinlistu ja automáhtalaččat"
#: tdeui/kaboutkde.cpp:34
msgid ""
-"The <b>K Desktop Environment</b> is written and maintained by the KDE Team, a "
+"The <b>K Desktop Environment</b> is written and maintained by the TDE Team, a "
"world-wide network of software engineers committed to <a "
"href=\"http://www.gnu.org/philosophy/free-sw.html\">Free Software</a> "
"development."
"<br>"
-"<br>No single group, company or organization controls the KDE source code. "
-"Everyone is welcome to contribute to KDE."
+"<br>No single group, company or organization controls the TDE source code. "
+"Everyone is welcome to contribute to TDE."
"<br>"
"<br>Visit <A HREF=\"http://www.kde.org/\">http://www.kde.org</A> "
-"for more information on the KDE project. "
+"for more information on the TDE project. "
msgstr ""
-"KDE-joavku lea čállán ja fuolaha <b>K Desktop Environment</b>"
-". KDE-joavku lea máilbmeviidosaš prográmmerejeaddji-fierpmádat mii ovddida <a "
+"TDE-joavku lea čállán ja fuolaha <b>K Desktop Environment</b>"
+". TDE-joavku lea máilbmeviidosaš prográmmerejeaddji-fierpmádat mii ovddida <a "
"href=\"http://www.gnu.org/philosophy/free-sw.html\">fridja prográmmagálvu</a>. "
"<br> "
-"<br> Ii oktage joavku, fitnodat dahje organisašuvdna hálddaš KDE galdokoda "
+"<br> Ii oktage joavku, fitnodat dahje organisašuvdna hálddaš TDE galdokoda "
"okto."
"<br> "
-"<br>Don gávnnat eanet dieđuid KDE ruovttosiiddus: <A "
+"<br>Don gávnnat eanet dieđuid TDE ruovttosiiddus: <A "
"HREF=\"http://www.kde.org/\"> http://www.kde.org/</A>"
#: tdeui/kaboutkde.cpp:43
msgid ""
-"Software can always be improved, and the KDE Team is ready to do so. However, "
+"Software can always be improved, and the TDE Team is ready to do so. However, "
"you - the user - must tell us when something does not work as expected or could "
"be done better."
"<br>"
@@ -5492,11 +5492,11 @@ msgid ""
"bug tracking system to register your wish. Make sure you use the severity "
"called \"Wishlist\"."
msgstr ""
-"Prográmmagálvu sáhttá álo buoridit, ja KDE-joavku lea gárvvis dahkat dan. "
+"Prográmmagálvu sáhttá álo buoridit, ja TDE-joavku lea gárvvis dahkat dan. "
"Muhto, don – geavaheaddji – fertet muitalit midjiide go juoga ii doaimma nu go "
"vurdojuvvon dahje sáhttá dahkkojuvvot buorebut"
"<br>"
-"<br>KDE:as lea vuogádat ohcat dihkiid. Fina <A HREF=\"http://bugs.kde.org/\">"
+"<br>TDE:as lea vuogádat ohcat dihkiid. Fina <A HREF=\"http://bugs.kde.org/\">"
"http://bugs.kde.org/</A> báikkis dahje geavat «Váidal dihki» láseža «Veahkki» "
"fálus váidalit dihkiid."
"<br>"
@@ -5506,7 +5506,7 @@ msgstr ""
#: tdeui/kaboutkde.cpp:54
msgid ""
-"You do not have to be a software developer to be a member of the KDE team. You "
+"You do not have to be a software developer to be a member of the TDE team. You "
"can join the national teams that translate program interfaces. You can provide "
"graphics, themes, sounds, and improved documentation. You decide!"
"<br>"
@@ -5517,7 +5517,7 @@ msgid ""
"HREF=\"http://developer.kde.org/\">http://developer.kde.org</A> "
"will provide you with what you need."
msgstr ""
-"Don it dárbbaš leat prográmmaovdideaddji searvat KDE-jovkui. Sáhtát searvat "
+"Don it dárbbaš leat prográmmaovdideaddji searvat TDE-jovkui. Sáhtát searvat "
"našuvnnalaš jovkkuide mat jorgalit prográmmaid lavttaid. Sáhtát jorgalit, "
"ráhkadit govaid, fáttáid, jienaid ja buorebut dokumentašuvnna. Lea bargu "
"buohkkaide! "
@@ -5532,30 +5532,30 @@ msgstr ""
#: tdeui/kaboutkde.cpp:67
msgid ""
-"KDE is available free of charge, but making it is not free."
+"TDE is available free of charge, but making it is not free."
"<br>"
-"<br>Thus, the KDE team formed the KDE e.V., a non-profit organization legally "
-"founded in Tuebingen, Germany. The KDE e.V. represents the KDE project in legal "
+"<br>Thus, the TDE team formed the TDE e.V., a non-profit organization legally "
+"founded in Tuebingen, Germany. The TDE e.V. represents the TDE project in legal "
"and financial matters. See <a href=\"http://www.kde-ev.org/\">"
-"http://www.kde-ev.org</a> for information on the KDE e.V."
+"http://www.kde-ev.org</a> for information on the TDE e.V."
"<br>"
-"<br>The KDE team does need financial support. Most of the money is used to "
+"<br>The TDE team does need financial support. Most of the money is used to "
"reimburse members and others on expenses they experienced when contributing to "
-"KDE. You are encouraged to support KDE through a financial donation, using one "
+"TDE. You are encouraged to support TDE through a financial donation, using one "
"of the ways described at <a href=\"http://www.kde.org/support/\">"
"http://www.kde.org/support/</a>."
"<br>"
"<br>Thank you very much in advance for your support."
msgstr ""
-"KDE lea nuvttá, muhto ii leat nuvttá ráhkadit dan. "
+"TDE lea nuvttá, muhto ii leat nuvttá ráhkadit dan. "
"<br> "
-"<br>Danne lea KDE-joavku álggahan KDE e.V., «non-profit» organisašuvdna, "
-"registrerejuvvon Tübingenis, Duiskkas. KDE e.V.ovddida KDE-prošeavtta "
+"<br>Danne lea TDE-joavku álggahan TDE e.V., «non-profit» organisašuvdna, "
+"registrerejuvvon Tübingenis, Duiskkas. TDE e.V.ovddida TDE-prošeavtta "
"juridihkalaččat ja ruđalaččat. <a href=\"http://www.kde.org/kde-ev/\">"
-"http://www.kde.org/kde-ev/<a> báikkis gávnnat eanet dieđuid KDE e.V. birra. "
+"http://www.kde.org/kde-ev/<a> báikkis gávnnat eanet dieđuid TDE e.V. birra. "
"<br> "
-"<br> KDE-joavku dárbbaša ruđalaš doarjaga. Eanáš daid ruđain gokčet golut mat "
-"organisašuvnna mielláhttuin lea KDE ovddideames. <a "
+"<br> TDE-joavku dárbbaša ruđalaš doarjaga. Eanáš daid ruđain gokčet golut mat "
+"organisašuvnna mielláhttuin lea TDE ovddideames. <a "
"href=\"http://www.kde.org/support.html\">http://www.kde.org/support.html </a> "
"siiddus oainnat mo sáhtát veahkehit. "
"<br> "
@@ -5568,21 +5568,21 @@ msgstr "K Desktop Environment. Veršuvdna %1"
#: tdeui/kaboutkde.cpp:83
msgid ""
-"_: About KDE\n"
+"_: About TDE\n"
"&About"
-msgstr "&KDE birrra"
+msgstr "&TDE birrra"
#: tdeui/kaboutkde.cpp:84
msgid "&Report Bugs or Wishes"
msgstr "&Váidal dihkiid dahje sávaldagaid"
#: tdeui/kaboutkde.cpp:85
-msgid "&Join the KDE Team"
-msgstr "&Searvva KDE-jovkui"
+msgid "&Join the TDE Team"
+msgstr "&Searvva TDE-jovkui"
#: tdeui/kaboutkde.cpp:86
-msgid "&Support KDE"
-msgstr "&Doarjut KDE"
+msgid "&Support TDE"
+msgstr "&Doarjut TDE"
#: tdeui/kstdguiitem.cpp:110 khtml/java/kjavaappletserver.cpp:804
msgid "&Yes"
@@ -6323,7 +6323,7 @@ msgid ""
msgstr ""
"Čále dihkkeváidalusa (eŋgelasgillii, jos vejolaš).\n"
"Go coahkkalat «Sádde», de sáddejuvvo e-boasta dán prográmma fuolaheaddjái\n"
-"ja KDE dihkkelistui.\n"
+"ja TDE dihkkelistui.\n"
#: tdeui/kbugreport.cpp:252
msgid ""
@@ -6493,8 +6493,8 @@ msgid "&About %1"
msgstr "%1 &dieđut"
#: tdeui/khelpmenu.cpp:176 tdeui/kstdaction_p.h:114
-msgid "About &KDE"
-msgstr "KDE &dieđut"
+msgid "About &TDE"
+msgstr "TDE &dieđut"
#: tdeui/kactionclasses.cpp:2072
msgid "Exit F&ull Screen Mode"
@@ -6621,8 +6621,8 @@ msgid "Task"
msgstr "Bargu"
#: tdeui/kaboutdialog.cpp:704
-msgid "%1 %2 (Using KDE %3)"
-msgstr "%1 %2 (Geavaha KDE %3)"
+msgid "%1 %2 (Using TDE %3)"
+msgstr "%1 %2 (Geavaha TDE %3)"
#: tdeui/kaboutdialog.cpp:706
msgid "%1 %2, %3"
@@ -7362,8 +7362,8 @@ msgstr ""
"sáddedettiin. Sihkkarvuođadihte mielddus ii sáddejuvvon."
#: khtml/khtml_part.cpp:4870
-msgid "KDE"
-msgstr "KDE"
+msgid "TDE"
+msgstr "TDE"
#: khtml/khtml_part.cpp:5776
msgid "(%1/s)"
@@ -7752,8 +7752,8 @@ msgid "Archives"
msgstr "Vuorkát"
#: khtml/java/kjavaappletviewer.cpp:451
-msgid "KDE Java Applet Plugin"
-msgstr "KDE-lassemoduvla Java-prográmmažiid várás"
+msgid "TDE Java Applet Plugin"
+msgstr "TDE-lassemoduvla Java-prográmmažiid várás"
#: khtml/java/kjavaapplet.cpp:225
msgid "Initializing Applet \"%1\"..."
@@ -7945,8 +7945,8 @@ msgstr ""
"klauncher: tdeinit álggaha prográmma automáhtalaččat.\n"
#: kinit/klauncher.cpp:743
-msgid "KDEInit could not launch '%1'."
-msgstr "KDEInit ii sáhttán álggahit «%1»."
+msgid "TDEInit could not launch '%1'."
+msgstr "TDEInit ii sáhttán álggahit «%1»."
#: kinit/klauncher.cpp:918 kinit/klauncher.cpp:943 kinit/klauncher.cpp:960
msgid "Could not find service '%1'."
@@ -7994,8 +7994,8 @@ msgid "KConf Update"
msgstr "KConf-ođasmahttin"
#: kconf_update/kconf_update.cpp:945
-msgid "KDE Tool for updating user configuration files"
-msgstr "KDE-reaidu ođasmahttit geavaheaddji heivehusfiillaid"
+msgid "TDE Tool for updating user configuration files"
+msgstr "TDE-reaidu ođasmahttit geavaheaddji heivehusfiillaid"
#: kspell2/ui/configdialog.cpp:38
msgid "KSpell2 Configuration"
@@ -8030,11 +8030,11 @@ msgid "Web style plugin"
msgstr "Webstiilla-liigemoduvla"
#: kstyles/klegacy/plugin.cpp:28
-msgid "KDE LegacyStyle plugin"
-msgstr "KDE LegacyStyle-lassemoduvla"
+msgid "TDE LegacyStyle plugin"
+msgstr "TDE LegacyStyle-lassemoduvla"
#: kstyles/utils/installtheme/main.cpp:35
-msgid "KDE Tool to build a cache list of all pixmap themes installed"
+msgid "TDE Tool to build a cache list of all pixmap themes installed"
msgstr ""
#: kstyles/utils/installtheme/main.cpp:40
@@ -8389,7 +8389,7 @@ msgid ""
"<br>%1"
"<p>Possible reasons:</p>"
"<ul>"
-"<li>An error occurred during your last KDE upgrade leaving an orphaned control "
+"<li>An error occurred during your last TDE upgrade leaving an orphaned control "
"module"
"<li>You have old third party modules lying around.</ul>"
"<p>Check these points carefully and try to remove the module mentioned in the "
@@ -8582,8 +8582,8 @@ msgid "kcmkresources"
msgstr "kcmkresources"
#: kresources/kcmkresources.cpp:45
-msgid "KDE Resources configuration module"
-msgstr "KDE resurssaid heivehanmoduvla"
+msgid "TDE Resources configuration module"
+msgstr "TDE resurssaid heivehanmoduvla"
#: kresources/kcmkresources.cpp:47
msgid "(c) 2003 Tobias Koenig"
@@ -8762,24 +8762,24 @@ msgstr "Muitu lea nohkan"
msgid ""
"Your local kab configuration file \"%1\" could not be created. kab will "
"probably not work correctly without it.\n"
-"Make sure you have not removed write permission from your local KDE directory "
+"Make sure you have not removed write permission from your local TDE directory "
"(usually ~/.kde)."
msgstr ""
"Ii sáhttán ráhkadit báikkálaš kab-heivehusfiilla «%1». Árvideames kab ii "
"doaimma álbmaláhkai dan haga.\n"
-"Dárkkis ahte don it leat váldán eret čállinvuoigatvuođaid du báikkálaš KDE-ozus "
+"Dárkkis ahte don it leat váldán eret čállinvuoigatvuođaid du báikkálaš TDE-ozus "
"(dábálaččat ~/.kde)."
#: kab/addressbook.cc:461
msgid ""
"Your standard kab database file \"%1\" could not be created. kab will probably "
"not work correctly without it.\n"
-"Make sure you have not removed write permission from your local KDE directory "
+"Make sure you have not removed write permission from your local TDE directory "
"(usually ~/.kde)."
msgstr ""
"Ii sáhttán ráhkadit du báikkálaš kab diehtovuođđofiila, «%1». kab árvideames ii "
"doaimma álbmaláhkai dan haga.\n"
-"Dárkkis ahte don it leat váldán čállinvuoigatvuođaid eret du báikkálaš KDE ozus "
+"Dárkkis ahte don it leat váldán čállinvuoigatvuođaid eret du báikkálaš TDE ozus "
"(Dábálaččat ~/.kde)."
#: kab/addressbook.cc:471
@@ -9085,8 +9085,8 @@ msgid "Import &All"
msgstr "&Sisafievrrit visot"
#: kcert/kcertpart.cc:183 kcert/kcertpart.cc:274 kcert/kcertpart.cc:359
-msgid "KDE Secure Certificate Import"
-msgstr "KDE:a sihkaris sertifikáhtta sisafievrrideapmi"
+msgid "TDE Secure Certificate Import"
+msgstr "TDE:a sihkaris sertifikáhtta sisafievrrideapmi"
#: kcert/kcertpart.cc:184
msgid "Chain:"
@@ -9177,8 +9177,8 @@ msgid "Certificate Import"
msgstr "Duođaštussisafievrrideapmi"
#: kcert/kcertpart.cc:455
-msgid "You do not seem to have compiled KDE with SSL support."
-msgstr "KDE ii oroleamen kompilerejuvvon SSL-doarjagiin."
+msgid "You do not seem to have compiled TDE with SSL support."
+msgstr "TDE ii oroleamen kompilerejuvvon SSL-doarjagiin."
#: kcert/kcertpart.cc:460
msgid "Certificate file is empty."
@@ -9216,23 +9216,23 @@ msgstr "Duođaštus mas lea dát namma gávdno juo. Háliidatgo duođas dan buht
#: kcert/kcertpart.cc:741 kcert/kcertpart.cc:759
msgid ""
-"Certificate has been successfully imported into KDE.\n"
-"You can manage your certificate settings from the KDE Control Center."
+"Certificate has been successfully imported into TDE.\n"
+"You can manage your certificate settings from the TDE Control Center."
msgstr ""
-"KDE lea sisafievrridan duođaštusa.\n"
-"Don sáhtát hálddašit duođaštusheivehusat KDE-stivrenguovddážis."
+"TDE lea sisafievrridan duođaštusa.\n"
+"Don sáhtát hálddašit duođaštusheivehusat TDE-stivrenguovddážis."
#: kcert/kcertpart.cc:873
msgid ""
-"Certificates have been successfully imported into KDE.\n"
-"You can manage your certificate settings from the KDE Control Center."
+"Certificates have been successfully imported into TDE.\n"
+"You can manage your certificate settings from the TDE Control Center."
msgstr ""
-"KDE lea sisafievrridan duođaštusaid.\n"
-"Don sáhtát hálddašit duođaštusheivehusat KDE-stivrenguovddážis."
+"TDE lea sisafievrridan duođaštusaid.\n"
+"Don sáhtát hálddašit duođaštusheivehusat TDE-stivrenguovddážis."
#: kcert/kcertpart.cc:879
-msgid "KDE Certificate Part"
-msgstr "KDE duođaštusoassi"
+msgid "TDE Certificate Part"
+msgstr "TDE duođaštusoassi"
#: khtml/khtml_settings.cc:152
msgid "Accept"
@@ -9419,12 +9419,12 @@ msgid "expand ${prefix} and ${exec_prefix} in output"
msgstr ""
#: tdecore/tde-config.cpp.in:19
-msgid "Compiled in prefix for KDE libraries"
-msgstr "Sisakompilerejuvvon prefiksa KDE-bibliotehkaid várás"
+msgid "Compiled in prefix for TDE libraries"
+msgstr "Sisakompilerejuvvon prefiksa TDE-bibliotehkaid várás"
#: tdecore/tde-config.cpp.in:20
-msgid "Compiled in exec_prefix for KDE libraries"
-msgstr "Sisakompilerejuvvon exec_prefix KDE-bibliotehkaid várás"
+msgid "Compiled in exec_prefix for TDE libraries"
+msgstr "Sisakompilerejuvvon exec_prefix TDE-bibliotehkaid várás"
#: tdecore/tde-config.cpp.in:21
msgid "Compiled in library path suffix"
@@ -9435,12 +9435,12 @@ msgid "Prefix in $HOME used to write files"
msgstr "Prefiksa $HOME birasvariábelis mii geavahuvvo go čállá fiillaid"
#: tdecore/tde-config.cpp.in:23
-msgid "Compiled in version string for KDE libraries"
+msgid "Compiled in version string for TDE libraries"
msgstr ""
#: tdecore/tde-config.cpp.in:24
-msgid "Available KDE resource types"
-msgstr "Olamuttus KDE-resursašlájat"
+msgid "Available TDE resource types"
+msgstr "Olamuttus TDE-resursašlájat"
#: tdecore/tde-config.cpp.in:25
msgid "Search path for resource type"
diff --git a/tde-i18n-se/messages/tdelibs/tdeprint.po b/tde-i18n-se/messages/tdelibs/tdeprint.po
index 848355671aa..bc9e56a0245 100644
--- a/tde-i18n-se/messages/tdelibs/tdeprint.po
+++ b/tde-i18n-se/messages/tdelibs/tdeprint.po
@@ -515,13 +515,13 @@ msgstr ""
msgid ""
" <qt><b>Printer Selection Menu:</b> "
"<p>Use this combo box to select the printer to which you want to print. "
-"Initially (if you run KDEPrint for the first time), you may only find the <em>"
-"KDE special printers</em> (which save jobs to disk [as PostScript- or "
+"Initially (if you run TDEPrint for the first time), you may only find the <em>"
+"TDE special printers</em> (which save jobs to disk [as PostScript- or "
"PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing "
"a real printer, you need to... "
"<ul> "
"<li>...either create a local printer with the help of the <em>"
-"KDE Add Printer Wizard</em>. The Wizard is available for the CUPS and RLPR "
+"TDE Add Printer Wizard</em>. The Wizard is available for the CUPS and RLPR "
"printing systems (click button to the left of the <em>'Properties'</em> "
"button),</li> "
"<li>...or try to connect to an existing remote CUPS print server. You can "
@@ -529,14 +529,14 @@ msgid ""
"opens: click on the <em>'CUPS server'</em> icon: Fill in the information "
"required to use the remote server. </li> </ul> "
"<p><b>Note:</b> It may happen that you successfully connected to a remote CUPS "
-"server and still do not get a printer list. If this happens: force KDEPrint to "
+"server and still do not get a printer list. If this happens: force TDEPrint to "
"re-load its configuration files. To reload the configuration files, either "
"start kprinter again, or use the switch the print system away from CUPS and "
"back again once. The print system switch can be made through a selection in "
"the drop-down menu at bottom of this dialog when fully expanded). </p> </qt>"
msgstr ""
"<qt> Dán lotnolasbovssas válljet guđe čálániin čálihat. Jus gávnnat dušše <em>"
-"KDE erenoamáščálániid</em> – mat vurkejit bargguid skearrui (PostScript- dahje "
+"TDE erenoamáščálániid</em> – mat vurkejit bargguid skearrui (PostScript- dahje "
"PDF-fiilan), dahje sáddejit bargguid e-boastta bokte (PDF-mielddusin) – muhto "
"váilot albma čálána, de fertet …"
@@ -557,7 +557,7 @@ msgid ""
"<p>To create a personal <em>'selective view list'</em>, click on the <em>"
"'System Options'</em> button at the bottom of this dialog. Then, in the new "
"dialog, select <em>'Filter'</em> (left column in the <em>"
-"KDE Print Configuration</em> dialog) and setup your selection..</p> "
+"TDE Print Configuration</em> dialog) and setup your selection..</p> "
"<p><b>Warning:</b> Clicking this button without prior creation of a personal "
"<em>'selective view list'</em> will make all printers dissappear from the "
"view. (To re-enable all printers, just click this button again.) </p> </qt>"
@@ -565,11 +565,11 @@ msgstr ""
#: kprintdialog.cpp:154
msgid ""
-"<qt><b>KDE Add Printer Wizard</b> "
-"<p>This button starts the <em>KDE Add Printer Wizard</em>.</p> "
+"<qt><b>TDE Add Printer Wizard</b> "
+"<p>This button starts the <em>TDE Add Printer Wizard</em>.</p> "
"<p>Use the Wizard (with <em>\"CUPS\"</em> or <em>\"RLPR\"</em>"
") to add locally defined printers to your system. </p> "
-"<p><b>Note:</b> The <em>KDE Add Printer Wizard</em> does <b>not</b> "
+"<p><b>Note:</b> The <em>TDE Add Printer Wizard</em> does <b>not</b> "
"work, and this button is disabled if you use <em>\"Generic LPD</em>\", <em>"
"\"LPRng\"</em>, or <em>\"Print Through an External Program</em>\".) </p> </qt>"
msgstr ""
@@ -595,20 +595,20 @@ msgid ""
"<p>This button starts a new dialog where you can adjust various settings of "
"your printing system. Amongst them: "
"<ul>"
-"<li> Should KDE applications embed all fonts into the PostScript they generate "
+"<li> Should TDE applications embed all fonts into the PostScript they generate "
"for printing? "
-"<li> Should KDE use an external PostScript viewer like <em>gv</em> "
+"<li> Should TDE use an external PostScript viewer like <em>gv</em> "
"for print page previews? "
-"<li> Should KDEPrint use a local or a remote CUPS server?, </ul> "
+"<li> Should TDEPrint use a local or a remote CUPS server?, </ul> "
"and many more.... </qt>"
msgstr ""
#: kprintdialog.cpp:182
#, fuzzy
msgid ""
-" <qt><b>Help:</b> This button takes you to the complete <em>KDEPrint Manual</em>"
+" <qt><b>Help:</b> This button takes you to the complete <em>TDEPrint Manual</em>"
". </qt>"
-msgstr " <qt> Dát boallu doalvu du <em>KDEPrint-giehtagirjái</em>.</qt>"
+msgstr " <qt> Dát boallu doalvu du <em>TDEPrint-giehtagirjái</em>.</qt>"
#: kprintdialog.cpp:186
#, fuzzy
@@ -623,12 +623,12 @@ msgstr ""
#, fuzzy
msgid ""
" <qt><b>Print:</b> This button sends the job to the printing process. If you "
-"are sending non-PostScript files, you may be asked if you want KDE to convert "
+"are sending non-PostScript files, you may be asked if you want TDE to convert "
"the files into PostScript, or if you want your print subsystem (like CUPS) to "
"do this. </qt>"
msgstr ""
" <qt>Dát boallu sádde barggu čálihanprosessii. Jos sáddet "
-"eai-PostScrpt-fiillaid, de fertet veardidit jos KDE galgá jorgalit fiilla "
+"eai-PostScrpt-fiillaid, de fertet veardidit jos TDE galgá jorgalit fiilla "
"PostScript:ii dahje jos čálihanvuogádat (nugo CUPS) galgá dan bargat.</qt>"
#: kprintdialog.cpp:196
@@ -646,7 +646,7 @@ msgstr ""
msgid ""
" <qt><b>Output File Name and Path:</b> The \"Output file:\" shows you where "
"your file will be saved if you decide to \"Print to File\" your job, using one "
-"of the KDE <em>Special Printers</em> named \"Print to File (PostScript)\" or "
+"of the TDE <em>Special Printers</em> named \"Print to File (PostScript)\" or "
"\"Print to File (PDF)\". Choose a name and location that suits your need by "
"using the button and/or editing the line on the right. </qt>"
msgstr ""
@@ -684,9 +684,9 @@ msgid ""
"\"poster\" or \"pamphlet\" layout looks like you expected, without wasting "
"paper first. It also lets you cancel the job if something looks wrong. "
"<p><b>Note:</b> The preview feature (and therefore this checkbox) is only "
-"visible for printjobs created from inside KDE applications. If you start "
+"visible for printjobs created from inside TDE applications. If you start "
"kprinter from the commandline, or if you use kprinter as a print command for "
-"non-KDE applications (like Acrobat Reader, Firefox or OpenOffice), print "
+"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print "
"preview is not available here. </qt>"
msgstr ""
@@ -826,7 +826,7 @@ msgid ""
"secretaries who serve different bosses, etc.</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o job-billing=... # example: \"Marketing_Department\" or "
"\"Joe_Doe\" </pre> </p> </qt>"
@@ -850,7 +850,7 @@ msgid ""
"trays).</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o job-hold-until=... # example: \"indefinite\" or \"no-hold\" "
"</pre> </p> </qt>"
@@ -865,7 +865,7 @@ msgid ""
"<p>They contain any string you type into the line edit field.</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-label=\"...\" # example: \"Company Confidential\" </pre> "
"</p> </qt>"
@@ -887,7 +887,7 @@ msgid ""
"no other, higher prioritized one is present).</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o job-priority=... # example: \"10\" or \"66\" or \"99\" </pre> "
"</p> </qt>"
@@ -1291,7 +1291,7 @@ msgid ""
"<p>The default value is 10, meaning that the font is scaled in a way that 10 "
"characters per inch will be printed. </p> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o cpi=... # example: \"8\" or \"12\" </pre> </p> </qt>"
msgstr ""
@@ -1305,7 +1305,7 @@ msgid ""
"<p>The default value is 6, meaning that the font is scaled in a way that 6 "
"lines per inch will be printed. </p> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o lpi=... # example \"5\" or \"7\" </pre> </p> </qt>"
msgstr ""
@@ -1319,7 +1319,7 @@ msgid ""
"<p>The default value is 1, meaning that only one column of text per page will "
"be printed. </p> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o columns=... # example: \"2\" or \"4\" </pre> </p> </qt>"
msgstr ""
@@ -1335,11 +1335,11 @@ msgid ""
"<p>These settings control the appearance of text on printouts. They are only "
"valid for printing text files or input directly through kprinter. </p> "
"<p><b>Note:</b> These settings have no effect whatsoever for other input "
-"formats than text, or for printing from applications such as the KDE Advanced "
+"formats than text, or for printing from applications such as the TDE Advanced "
"Text Editor. (Applications in general send PostScript to the print system, and "
"'kate' in particular has its own knobs to control the print output. </p>. "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o cpi=... # example: \"8\" or \"12\" "
"<br> -o lpi=... # example: \"5\" or \"7\" "
@@ -1352,9 +1352,9 @@ msgid ""
"<p><b>Margins</b></p> "
"<p>These settings control the margins of printouts on the paper. They are not "
"valid for jobs originating from applications which define their own page "
-"layout internally and send PostScript to KDEPrint (such as KOffice or "
+"layout internally and send PostScript to TDEPrint (such as KOffice or "
"OpenOffice.org). </p> "
-"<p>When printing from KDE applications, such as KMail and Konqueror, or "
+"<p>When printing from TDE applications, such as KMail and Konqueror, or "
"printing an ASCII text file through kprinter, you can choose your preferred "
"margin settings here. </p> "
"<p>Margins may be set individually for each edge of the paper. The combo box at "
@@ -1363,7 +1363,7 @@ msgid ""
"<p>You can even use the mouse to grab one margin and drag it to the intended "
"position (see the preview picture on the right side). </p> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-top=... # example: \"72\" "
"<br> -o page-bottom=... # example: \"24\" "
@@ -1384,7 +1384,7 @@ msgid ""
"enscript</em> pre-filter on the <em>Filters</em> tab. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o prettyprint=true. </pre> </p> </qt>"
msgstr ""
@@ -1398,7 +1398,7 @@ msgid ""
"margins, though.) </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o prettyprint=false </pre> </p> </qt>"
msgstr ""
@@ -1416,7 +1416,7 @@ msgid ""
"enscript</em> pre-filter on the <em>Filters</em> tab. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o prettyprint=true. "
"<br> -o prettyprint=false </pre> </p> </qt>"
@@ -1481,7 +1481,7 @@ msgid ""
"server via this editable list. There are 3 purposes for this: "
"<ul> "
"<li>Use any current or future standard CUPS job option not supported by the "
-"KDEPrint GUI. </li> "
+"TDEPrint GUI. </li> "
"<li>Control any custom job option you may want to support in custom CUPS "
"filters and backends plugged into the CUPS filtering chain.</li> "
"<li>Send short messages to the operators of your production printers in your "
@@ -1515,7 +1515,7 @@ msgid ""
"<p><b>Note:</b> the fields must not include spaces, tabs or quotes. You may "
"need to double-click on a field to edit it. "
"<p><b>Warning:</b> Do not use such standard CUPS option names which also can be "
-"used through the KDEPrint GUI. Results may be unpredictable if they conflict, "
+"used through the TDEPrint GUI. Results may be unpredictable if they conflict, "
" or if they are sent multiple times. For all options supported by the GUI, "
"please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS "
"option name.) </p> </qt>"
@@ -1708,7 +1708,7 @@ msgid ""
"colors defined in the HP-GL/2 reference manual from Hewlett Packard. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o blackplot=true </pre> </p> </qt>"
msgstr ""
@@ -1728,7 +1728,7 @@ msgid ""
"the HP-GL to PostScript assumes the plot is ANSI E size. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o fitplot=true </pre> </p> </qt>"
msgstr ""
@@ -1745,7 +1745,7 @@ msgid ""
"set inside the plot file itself..</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o penwidth=... # example: \"2000\" or \"500\" </pre> </p> </qt>"
msgstr ""
@@ -1753,11 +1753,11 @@ msgstr ""
#: cups/kphpgl2page.cpp:85
msgid ""
" <qt> <b>HP-GL Print Options</b> "
-"<p>All options on this page are only applicable if you use KDEPrint to send "
+"<p>All options on this page are only applicable if you use TDEPrint to send "
"HP-GL and HP-GL/2 files to one of your printers. </p> "
"<p>HP-GL and HP-GL/2 are page description languages developed by "
"Hewlett-Packard to drive Pen Plotting devices. </p> "
-"<p>KDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
+"<p>TDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
"it on any installed printer. </p> "
"<p><b>Note 1:</b> To print HP-GL files, start 'kprinter' and simply load the "
"file into the running kprinter.</p> "
@@ -1766,7 +1766,7 @@ msgid ""
"1.1.22).</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> These KDEPrint GUI elements "
+"<p><em><b>Additional hint for power users:</b> These TDEPrint GUI elements "
"match with CUPS commandline job option parameters:</em> "
"<pre> -o blackplot=... # examples: \"true\" or \"false\" "
"<br> -o fitplot=... # examples: \"true\" or \"false\" "
@@ -1993,7 +1993,7 @@ msgid ""
"lighten the print. Values less than 100 will darken the print. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o brightness=... # use range from \"0\" to \"200\" </pre> </p> "
"</qt>"
@@ -2037,7 +2037,7 @@ msgid ""
"<td>Light-navy-blue</td> </tr> </table> </center> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o hue=... # use range from \"-360\" to \"360\" </pre> </p> </qt>"
msgstr ""
@@ -2055,7 +2055,7 @@ msgid ""
"make the colors extremely intense. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o saturation=... # use range from \"0\" to \"200\" </pre> </p> "
"</qt>"
@@ -2072,7 +2072,7 @@ msgid ""
"preview. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o gamma=... # use range from \"1\" to \"3000\" </pre> </p> "
"</qt>"
@@ -2143,7 +2143,7 @@ msgid ""
"printed. Scaling in % of natural image size defaults to 100 %. </ul> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o natural-scaling=... # range in % is 1....800 "
"<br> -o scaling=... # range in % is 1....800 "
@@ -2191,7 +2191,7 @@ msgid ""
"paper printout. Default is 'center'. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o position=... # examples: \"top-left\" or \"bottom\" </pre> "
"</p> </qt>"
@@ -3007,9 +3007,9 @@ msgstr "&Geavat olgguldas prográmma ovdačájeheapmái"
#: management/kmconfigpreview.cpp:44
msgid ""
-"You can use an external preview program (PS viewer) instead of the KDE built-in "
-"preview system. Note that if the KDE default PS viewer (KGhostView) cannot be "
-"found, KDE tries automatically to find another external PostScript viewer"
+"You can use an external preview program (PS viewer) instead of the TDE built-in "
+"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be "
+"found, TDE tries automatically to find another external PostScript viewer"
msgstr ""
#: management/kmwdrivertest.cpp:41
@@ -3073,8 +3073,8 @@ msgstr ""
"<p>%1</p></qt>"
#: management/kaddprinterwizard.cpp:10
-msgid "Configure KDE Print"
-msgstr "Heivet KDE-čáliheami"
+msgid "Configure TDE Print"
+msgstr "Heivet TDE-čáliheami"
#: management/kaddprinterwizard.cpp:11
msgid "Configure print server"
@@ -3105,8 +3105,8 @@ msgid ""
msgstr ""
#: management/kmdbcreator.cpp:113
-msgid "Please wait while KDE rebuilds a driver database."
-msgstr "Vuorddes dan bottago KDE hukse stivrrandiehtovuođu."
+msgid "Please wait while TDE rebuilds a driver database."
+msgstr "Vuorddes dan bottago TDE hukse stivrrandiehtovuođu."
#: management/kmdbcreator.cpp:114
msgid "Driver Database"
@@ -3176,8 +3176,8 @@ msgid "Change..."
msgstr "Rievdat …"
#: management/kmconfigdialog.cpp:38
-msgid "KDE Print Configuration"
-msgstr "Heivet čáliheami KDE:as"
+msgid "TDE Print Configuration"
+msgstr "Heivet čáliheami TDE:as"
#: management/kmwdriver.cpp:33
msgid "Printer Model Selection"
@@ -3328,7 +3328,7 @@ msgstr " s"
#: management/kmconfiggeneral.cpp:53
msgid ""
-"This time setting controls the refresh rate of various <b>KDE Print</b> "
+"This time setting controls the refresh rate of various <b>TDE Print</b> "
"components like the print manager and the job viewer."
msgstr ""
@@ -3471,7 +3471,7 @@ msgstr ""
#: management/kmconfigfonts.cpp:89
msgid ""
-"When using font embedding you can select additional directories where KDE "
+"When using font embedding you can select additional directories where TDE "
"should search for embeddable font files. By default, the X server font path is "
"used, so adding those directories is not needed. The default search path should "
"be sufficient in most cases."
@@ -3825,7 +3825,7 @@ msgid ""
"<br>"
"<p>We hope you'll enjoy this tool!</p>"
"<br><p align=right><a href=\"http://printing.kde.org\"><i>"
-"The KDE printing team</i></a>.</p>"
+"The TDE printing team</i></a>.</p>"
msgstr ""
"<p>Bures boahtin!</p> "
"<br> "
@@ -3835,7 +3835,7 @@ msgstr ""
"<br> "
"<p>Sávvamis dát reaidu lea ávkin dutnje!</p> "
"<br><p align=right><a href=\"http://printing.kde.org\"> <i>"
-"KDE-čálihan joavku</i></a>.</p>"
+"TDE-čálihan joavku</i></a>.</p>"
#: management/kmdriverdbwidget.cpp:51
msgid "&PostScript printer"
@@ -4277,7 +4277,7 @@ msgid ""
" <qt> <b>File Open button</b> "
"<p>This button tries to open the highlighted file, so you can view or edit it "
"before you send it to the printing system.</p> "
-"<p>If you open files, KDEPrint will use the application matching the MIME type "
+"<p>If you open files, TDEPrint will use the application matching the MIME type "
"of the file.</p> </qt>"
msgstr ""
@@ -4286,7 +4286,7 @@ msgid ""
" <qt> <b>File List view</b> "
"<p>This list displays all the files you selected for printing. You can see the "
"file name(s), file path(s) and the file (MIME) type(s) as determined by "
-"KDEPrint. You may re-arrange the initial order of the list with the help of "
+"TDEPrint. You may re-arrange the initial order of the list with the help of "
"the arrow buttons on the right.</p> "
"<p>The files will be printed as a single job, in the same order as displayed in "
"the list.</p> "
@@ -4294,7 +4294,7 @@ msgid ""
"locations. The files may be of multiple MIME types. The buttons on the right "
"side let you add more files, remove already selected files from the list, "
"re-order the list (by moving files up or down), and open files. If you open "
-"files, KDEPrint will use the application matching the MIME type of the file.</p> "
+"files, TDEPrint will use the application matching the MIME type of the file.</p> "
"</qt>"
msgstr ""
@@ -4328,8 +4328,8 @@ msgstr ""
msgid ""
" <qt><b>Print Subsystem Selection</b> "
"<p>This combo box shows (and lets you select) a print subsystem to be used by "
-"KDEPrint. (This print subsystem must, of course, be installed inside your "
-"Operating System.) KDEPrint usually auto-detects the correct print subsystem by "
+"TDEPrint. (This print subsystem must, of course, be installed inside your "
+"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
"itself upon first startup. Most Linux distributions have \"CUPS\", the <em>"
"Common UNIX Printing System</em>. </qt>"
msgstr ""
@@ -4371,7 +4371,7 @@ msgid ""
"<p><b>Note.</b> The number of available job options depends strongly on the "
"actual driver used for your print queue. <em>'Raw'</em> "
"queues do not have a driver or a PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present in the kprinter dialog.</p> </qt>"
+"loaded by TDEPrint, and thus is not present in the kprinter dialog.</p> </qt>"
msgstr ""
#: driverview.cpp:71
@@ -4396,7 +4396,7 @@ msgid ""
"<p><b>Note.</b> The number of available job options depends strongly on the "
"actual driver used for your print queue. <em>'Raw'</em> "
"queues do not have a driver or a PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present in the kprinter dialog.</p> </qt>"
+"loaded by TDEPrint, and thus is not present in the kprinter dialog.</p> </qt>"
msgstr ""
#: kprinter.cpp:280
@@ -4453,7 +4453,7 @@ msgstr "Bálddalasverrát %1"
#: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661
#, c-format
-msgid "Unable to load KDE print management library: %1"
+msgid "Unable to load TDE print management library: %1"
msgstr ""
#: kmmanager.cpp:491 kxmlcommand.cpp:669
@@ -4480,8 +4480,8 @@ msgstr "Gáiddus čálihangárgadas dáppe: %1"
#: kmspecialmanager.cpp:53
msgid ""
-"A file share/tdeprint/specials.desktop was found in your local KDE directory. "
-"This file probably comes from a previous KDE release and should be removed in "
+"A file share/tdeprint/specials.desktop was found in your local TDE directory. "
+"This file probably comes from a previous TDE release and should be removed in "
"order to manage global pseudo printers."
msgstr ""
@@ -4511,10 +4511,10 @@ msgstr "Ii sáhttán álggahit vuolleproseassa čáliheapmái. "
#: kprinterimpl.cpp:281
msgid ""
-"The KDE print server (<b>tdeprintd</b>) could not be contacted. Check that this "
+"The TDE print server (<b>tdeprintd</b>) could not be contacted. Check that this "
"server is running."
msgstr ""
-"Ii ožžon oktavuođa KDE-čálihanbálváin (<b>tdeprintd</b>"
+"Ii ožžon oktavuođa TDE-čálihanbálváin (<b>tdeprintd</b>"
"). Dárkkis ahte bálvá lea jođus."
#: kprinterimpl.cpp:283
@@ -4551,7 +4551,7 @@ msgstr ""
msgid ""
"The MIME type %1 is not supported as input of the filter chain (this may happen "
"with non-CUPS spoolers when performing page selection on a non-PostScript "
-"file). Do you want KDE to convert the file to a supported format?</p>"
+"file). Do you want TDE to convert the file to a supported format?</p>"
msgstr ""
#: kprinterimpl.cpp:389 kprinterimpl.cpp:509
@@ -4598,12 +4598,12 @@ msgid ""
"<qt>The file format <em> %1 </em> is not directly supported by the current "
"print system. You now have 3 options: "
"<ul> "
-"<li> KDE can attempt to convert this file automatically to a supported format. "
+"<li> TDE can attempt to convert this file automatically to a supported format. "
"(Select <em>Convert</em>) </li>"
"<li> You can try to send the file to the printer without any conversion. "
"(Select <em>Keep</em>) </li>"
"<li> You can cancel the printjob. (Select <em>Cancel</em>) </li></ul> "
-"Do you want KDE to attempt and convert this file to %2?</qt>"
+"Do you want TDE to attempt and convert this file to %2?</qt>"
msgstr ""
#: kprinterimpl.cpp:518
@@ -4696,7 +4696,7 @@ msgid ""
"installed.</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o PageSize=... # examples: \"A4\" or \"Letter\" </pre> </p> "
"</qt>"
@@ -4711,7 +4711,7 @@ msgid ""
"installed. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o MediaType=... # example: \"Transparency\" </pre> </p> </qt>"
msgstr ""
@@ -4725,7 +4725,7 @@ msgid ""
"installed. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o InputSlot=... # examples: \"Lower\" or \"LargeCapacity\" "
"</pre> </p> </qt>"
@@ -4747,7 +4747,7 @@ msgid ""
"down.</li> </ul> The icon changes according to your selection.</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o orientation-requested=... # examples: \"landscape\" or "
"\"reverse-portrait\" </pre> </p> </qt>"
@@ -4773,7 +4773,7 @@ msgid ""
"if you turn it over the short edge. (Some printer drivers name this mode <em>"
"duplex-tumbled</em>). </li> </ul> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o duplex=... # examples: \"tumble\" or \"two-sided-short-edge\" "
" </pre> </p> </qt>"
@@ -4798,7 +4798,7 @@ msgid ""
"<p>CUPS comes with a selection of banner pages. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o job-sheets=... # examples: \"standard\" or \"topsecret\" "
"</pre> </p> </qt>"
@@ -4819,7 +4819,7 @@ msgid ""
"sheet in both places, your printout will not look as you intended. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o number-up=... # examples: \"2\" or \"4\" </pre> </p> </qt>"
msgstr ""
@@ -4929,7 +4929,7 @@ msgstr ""
#: tdeprintd.cpp:176
msgid ""
-"Some of the files to print are not readable by the KDE print daemon. This may "
+"Some of the files to print are not readable by the TDE print daemon. This may "
"happen if you are trying to print as a different user to the one currently "
"logged in. To continue printing, you need to provide root's password."
msgstr ""
@@ -4977,9 +4977,9 @@ msgstr ""
#: kpcopiespage.cpp:55
msgid ""
" <qt><b>Current Page:</b> Select <em>\"Current\"</em> "
-"if you want to print the page currently visible in your KDE application.</p> "
-"<p><b>Note:</b> this field is disabled if you print from non-KDE applications "
-"like Mozilla or OpenOffice.org, since here KDEPrint has no means to determine "
+"if you want to print the page currently visible in your TDE application.</p> "
+"<p><b>Note:</b> this field is disabled if you print from non-TDE applications "
+"like Mozilla or OpenOffice.org, since here TDEPrint has no means to determine "
"which document page you are currently viewing.</p></qt>"
msgstr ""
@@ -4993,7 +4993,7 @@ msgid ""
"document.</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-ranges=... # example: \"4,6,10-13,17,20,23-25\" </pre> "
"</p> </qt>"
@@ -5017,7 +5017,7 @@ msgid ""
"model).</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-set=... # example: \"odd\" or \"even\" </pre> </p> "
"</qt>"
@@ -5032,7 +5032,7 @@ msgid ""
"<p>The 'Copies' setting defaults to 1. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o copies=... # examples: \"5\" or \"42\" "
"<br> -o outputorder=... # example: \"reverse\" "
@@ -5048,7 +5048,7 @@ msgid ""
"and down arrows. You can also type the figure directly into the box. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o copies=... # examples: \"5\" or \"42\" </pre> </p> "
"</qt>"
@@ -5069,7 +5069,7 @@ msgid ""
"3-3-3-...\".</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o Collate=... # example: \"true\" or \"false\" </pre> </p> "
"</qt>"
@@ -5094,7 +5094,7 @@ msgid ""
"checkbox at the same time. </p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o outputorder=... # example: \"reverse\" </pre> </p> </qt>"
msgstr ""
@@ -5186,18 +5186,18 @@ msgstr ""
#: kprintpreview.cpp:300
msgid ""
-"Preview failed: neither the internal KDE PostScript viewer (KGhostView) nor any "
+"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any "
"other external PostScript viewer could be found."
msgstr ""
-"Ovdačájeheapmi filtii: Ii gávdnan KDE:a siskkildas PostScript-čájeheaddji "
+"Ovdačájeheapmi filtii: Ii gávdnan TDE:a siskkildas PostScript-čájeheaddji "
"(KGhostView) iige muhton eará olgguldas PostScript-čájeheaddji."
#: kprintpreview.cpp:304
#, c-format
msgid ""
-"Preview failed: KDE could not find any application to preview files of type %1."
+"Preview failed: TDE could not find any application to preview files of type %1."
msgstr ""
-"Ovdačájeheapmi filtii: KDE ii gávdnan prográmma mainna čájeha fiillat mas lea "
+"Ovdačájeheapmi filtii: TDE ii gávdnan prográmma mainna čájeha fiillat mas lea "
"šládja: %1."
#: kprintpreview.cpp:314
@@ -5263,7 +5263,7 @@ msgid ""
"PDF file, which in most cases have their margins hardcoded internally.</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-top=... # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch. </pre> </p> </qt>"
@@ -5284,7 +5284,7 @@ msgid ""
"PDF file, which in most cases have their margins hardcoded internally.</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-bottom=... # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch. </pre> </qt>"
@@ -5305,7 +5305,7 @@ msgid ""
"PDF file, which in most cases have their margins hardcoded internally.</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-left=... # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch. </pre> </qt>"
@@ -5326,7 +5326,7 @@ msgid ""
"PDF file, which in most cases have their margins hardcoded internally.</p> "
"<br> "
"<hr> "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-right=... # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch. </pre> </qt>"
@@ -5354,7 +5354,7 @@ msgid ""
"The margin setting does not work if you load such files directly into "
"kprinter, which have their print margins hardcoded internally, like as most "
"PDF or PostScript files. It works for all ASCII text files however. It also may "
-"not work with non-KDE applications which fail to fully utilize the KDEPrint "
+"not work with non-TDE applications which fail to fully utilize the TDEPrint "
"framework, such as OpenOffice.org. </p> </qt>"
msgstr ""
@@ -5409,9 +5409,9 @@ msgstr "JCL"
#: kmvirtualmanager.cpp:161
msgid ""
"<qt>You are about to set a pseudo-printer as your personal default. This "
-"setting is specific to KDE and will not be available outside KDE applications. "
+"setting is specific to TDE and will not be available outside TDE applications. "
"Note that this will only make your personal default printer as undefined for "
-"non-KDE applications and should not prevent you from printing normally. Do you "
+"non-TDE applications and should not prevent you from printing normally. Do you "
"really want to set <b>%1</b> as your personal default?</qt>"
msgstr ""
@@ -5428,7 +5428,7 @@ msgid ""
"here, the <em>'Poster Printing' filter</em> will be auto-loaded in the "
"'Filters' tab of this dialog. </p> "
"<p>This tab is only visible if the external <em>'poster'</em> "
-"utility is discovered by KDEPrint on your system. [<em>'poster'</em> "
+"utility is discovered by TDEPrint on your system. [<em>'poster'</em> "
"is a commandline utility that enables you to convert PostScript files into "
"tiled printouts which allow for oversized appearance of the stitched-together "
"tiles.] </p> "
@@ -5436,7 +5436,7 @@ msgid ""
"must use a patched version of 'poster'. Ask your operating system vendor to "
"provide a patched version of 'poster' if he does not already. </p> "
"<p><b>Additional hint for power users:</b> A patched version of 'poster' is "
-"available from the <a href=\"http://printing.kde.org/\">KDEPrint Website</a> "
+"available from the <a href=\"http://printing.kde.org/\">TDEPrint Website</a> "
"at <a "
"href=\"http://printing.kde.org/downloads/\">http://printing.kde.org/downloads/</"
"a>. The direct link to the patched source tarball is <a "
@@ -5599,7 +5599,7 @@ msgid ""
" <qt> <b>Add Filter button</b> "
"<p>This button calls a little dialog to let you select a filter here. </p> "
"<p><b>Note 1:</b> You can chain different filters as long as you make sure "
-"that the output of one fits as input of the next. (KDEPrint checks your "
+"that the output of one fits as input of the next. (TDEPrint checks your "
"filtering chain and will warn you if you fail to do so.</p> "
"<p><b>Note 2:</b> The filters you define here are applied to your jobfile <em>"
"<b>before</b></em> it is handed downstream to your spooler and print subsystem "
@@ -5639,7 +5639,7 @@ msgid ""
"<p>This field shows some general info about the selected filter. Amongst them "
"are: "
"<ul> "
-"<li>the <em>filter name</em> (as displayed in the KDEPrint user interface); "
+"<li>the <em>filter name</em> (as displayed in the TDEPrint user interface); "
"</li> "
"<li>the <em>filter requirements</em> (that is the external program that needs "
"to present and executable on this system); </li> "
@@ -5656,7 +5656,7 @@ msgid ""
" <qt> <b>Filtering Chain</b> (if enabled, is run <em>before</em> "
"actual job submission to print system) "
"<p>This field shows which filters are currently selected to act as "
-"'pre-filters' for KDEPrint. Pre-filters are processing the print files <em>"
+"'pre-filters' for TDEPrint. Pre-filters are processing the print files <em>"
"before</em> they are send downstream to your real print subsystem. </p> "
"<p>The list shown in this field may be empty (default). </p> "
"<p>The pre-filters act on the printjob in the order they are listed (from top "
@@ -5666,13 +5666,13 @@ msgid ""
"example: if your file is ASCII text, and you want the output being processed "
"by the 'Multipage per Sheet' filter, the first filter must be one that "
"processes ASCII into PostScript. </p> "
-"<p>KDEPrint can utilize <em>any</em> external filtering program which you may "
+"<p>TDEPrint can utilize <em>any</em> external filtering program which you may "
"find useful through this interface. </p> "
-"<p>KDEPrint ships preconfigured with support for a selection of common filters. "
-"These filters however need to be installed independently from KDEPrint. These "
-"pre-filters work <em>for all</em> print subsystems supported by KDEPrint (such "
+"<p>TDEPrint ships preconfigured with support for a selection of common filters. "
+"These filters however need to be installed independently from TDEPrint. These "
+"pre-filters work <em>for all</em> print subsystems supported by TDEPrint (such "
"as CUPS, LPRng and LPD), because they are not depending on these.</p> ."
-"<p> Amongst the pre-configured filters shipping with KDEPrint are: </p> "
+"<p> Amongst the pre-configured filters shipping with TDEPrint are: </p> "
"<ul> "
"<li>the <em>Enscript text filter</em> </li> "
"<li>a <em>Multiple Pages per Sheet filter</em </li> "
@@ -5683,7 +5683,7 @@ msgid ""
"click on the <em>funnel</em> icon (topmost on the right icon column group) and "
"proceed. </p> "
"<p>Please click on the other elements of this dialog to learn more about the "
-"KDEPrint pre-filters. </p> </qt>"
+"TDEPrint pre-filters. </p> </qt>"
msgstr ""
#: kpfilterpage.cpp:125
@@ -5732,7 +5732,7 @@ msgid ""
"<ul>"
"<li><b>Color</b> and</li> "
"<li><b>Grayscale</b></li></ul> <b>Note:</b> This selection field may be grayed "
-"out and made inactive. This happens if KDEPrint can not retrieve enough "
+"out and made inactive. This happens if TDEPrint can not retrieve enough "
"information about your print file. In this case the embedded color- or "
"grayscale information of your printfile, and the default handling of the "
"printer take precedence. </qt>"