1 files changed, 613 insertions, 0 deletions
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/kcmlilo.po b/tde-i18n-zh_TW/messages/kdeadmin/kcmlilo.po
new file mode 100644
index 00000000000..d0494544509
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/kcmlilo.po
@@ -0,0 +1,613 @@
+# traditional Chinese Translation of kcmlilo
+# Copyright (C) 2001-2002 Free Software Foundation, Inc.
+# Translator: Jing-Jong Shyue <shyue@sonoma.com.tw>, 2001.
+#             Chao-Hsiung Liao <pesder.liao@msa.hinet.net>, 2002.
+msgid ""
+msgstr ""
+"Project-Id-Version: kcmlilo\n"
+"POT-Creation-Date: 2007-03-13 02:18+0100\n"
+"PO-Revision-Date: 2005-12-08 10:11+0800\n"
+"Last-Translator: Chao-Hsiung Liao <pesder.liao@msa.hinet.net>\n"
+"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8-bit\n"
+
+#: kde-qt-common/EditWidget.cpp:43
+msgid "Select..."
+msgstr "選擇..."
+
+#: kde-qt-common/expert.cpp:41
+msgid ""
+"You can edit the lilo.conf file directly here. All changes you make here are "
+"automatically transferred to the graphical interface."
+msgstr "您可以在這邊直接編輯 lilo.conf。所有的變更會自動傳遞到圖形介面中。"
+
+#: kde-qt-common/general.cpp:45
+msgid "Install &boot record to drive/partition:"
+msgstr "安裝開機紀錄到磁碟/分割區(&B):"
+
+#: kde-qt-common/general.cpp:55
+msgid ""
+"Select the drive or partition you want to install the LILO boot loader to here. "
+"Unless you intend to use other boot managers in addition to LILO, this should "
+"be the MBR (master boot record) of your boot drive."
+"<br>In this case, you should probably select <i>/dev/hda</i> "
+"if your boot drive is an IDE drive or <i>/dev/sda</i> "
+"if your boot drive is SCSI."
+msgstr ""
+"在此選擇您想要安裝 LILO 啟動載入器的磁碟或分割區。除非您預備使用 LILO 以外的啟動管理器，它應該被安裝在您的開機磁碟的 MBR (主要啟動紀錄) "
+"中。"
+"<br>在這種狀況下，如果您使用 IDE 磁碟，您應該會使用 <i>/dev/hda</i>；如果您使用 SCSI 磁碟，使用 <i>/dev/sda</i>"
+"。"
+
+#: kde-qt-common/general.cpp:58
+msgid "Boot the default kernel/OS &after:"
+msgstr "在...後啟動預設核心/作業系統(&A):"
+
+#: kde-qt-common/general.cpp:60
+msgid "/10 seconds"
+msgstr "/10 秒"
+
+#: kde-qt-common/general.cpp:64
+msgid ""
+"LILO will wait the amount of time specified here before booting the kernel (or "
+"OS) marked as <i>default</i> in the <b>Images</b> tab."
+msgstr "LILO 將會等待在這邊指定的時間之後，自動啟動在<b>映像</b>分頁中標記為<i>預設</i>的核心（或作業系統）。"
+
+#: kde-qt-common/general.cpp:67
+msgid "Use &linear mode"
+msgstr "使用線性模式(&L)"
+
+#: kde-qt-common/general.cpp:69
+msgid ""
+"Check this box if you want to use the linear mode."
+"<br>Linear mode tells the boot loader the location of kernels in linear "
+"addressing rather than sector/head/cylinder."
+"<br>linear mode is required for some SCSI drives, and shouldn't hurt unless "
+"you're planning to create a boot disk to be used with a different computer."
+"<br>See the lilo.conf man page for details."
+msgstr ""
+"如果您要使用線性模式，核取此方塊。"
+"<br>線性模式會使啟動載入器以線性位置載入核心而不用 CHS 方式。"
+"<br>對有些 SCSI 磁碟而言，線性模式是必須的。除非您要建立在別台電腦上使用的開機磁碟，這也不會造成傷害。"
+"<br>詳細資料請參照 lilo.conf 手冊頁。"
+
+#: kde-qt-common/general.cpp:70
+msgid "Use &compact mode"
+msgstr "使用緊密模式(&C)"
+
+#: kde-qt-common/general.cpp:72
+msgid ""
+"Check this box if you want to use the compact mode."
+"<br>The compact mode tries to merge read requests for adjacent sectors into a "
+"single read request. This reduces load time and keeps the boot map smaller, but "
+"will not work on all systems."
+msgstr ""
+"如果您要使用緊密模式，核取此方塊。"
+"<br>緊密模式嘗試將多個磁區的讀取合併成一次讀取。這可以減少載入的時間並保持較小的啟動對應檔，但不是所有系統都能使用。"
+
+#: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85
+msgid "&Record boot command lines for defaults"
+msgstr "預設紀錄開機指令行(&R)"
+
+#: kde-qt-common/general.cpp:78
+msgid ""
+"Checking this box enables automatic recording of boot command lines as the "
+"defaults for the following boots. This way, lilo \"locks\" on a choice until it "
+"is manually overridden.\n"
+"This sets the <b>lock</b> option in lilo.conf."
+msgstr ""
+"核取這個方塊以自動紀錄開機命令成為往後開機的預設值。這種方式會讓 LILO “鎖定”這個選擇直到手動變更。\n"
+"這會設定 lilo.conf 中的 <b>lock</b> 選項。"
+
+#: kde-qt-common/general.cpp:79 kde/Details.cpp:84 qt/Details.cpp:87
+msgid "R&estrict parameters"
+msgstr "限制參數(&E)"
+
+#: kde-qt-common/general.cpp:82
+msgid ""
+"If this box is checked, a password (entered below) is required only if any "
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
+"linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"This sets the <b>restricted</b> option in lilo.conf."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+"如果核取這個方塊，要變更任何參數時，在下面輸入的密碼是必須的。也就是使用者可以啟動 <i>linux</i> 但不能使用 <i>linux single</i> "
+"或 <i>linux init=/bin/sh</i>。\n"
+"這會設定 lilo.conf 中的 <b>restricted</b> 選項。這個會影響所有的核心。如果您希望在每個核心有不同的設定，請到 <i>"
+"作業系統</i> 分頁並選擇 <i>詳細資料</i>。"
+
+#: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93
+msgid "Require &password:"
+msgstr "需要密碼(&P):"
+
+#: kde-qt-common/general.cpp:93
+msgid ""
+"Enter the password required for bootup (if any) here. If <i>restricted</i> "
+"above is checked, the password is required for additional parameters only."
+"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
+"You'll want to make sure nobody untrusted can read this file. Also, you "
+"probably don't want to use your normal/root password here."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+"在這邊輸入開機時需要的密碼。如果使用了上面的 <i>限制參數</i> 功能，必須要使用這個密碼才能變更參數。"
+"<br><b>警告：</b> 這個密碼是以未編碼的方式存在 /etc/lilo.conf "
+"中。您必須確定未授權的人不能讀取這個檔案。同時，建議不要使用您的一般/管理者密碼。"
+"<br>這個會影響所有的核心，如果您希望在每個核心有不同的設定，請到 <i>作業系統</i> 分頁並使用 <i>詳細資料</i>。"
+
+#: kde-qt-common/general.cpp:97
+msgid "&Default graphics mode on text console:"
+msgstr "在文字終端機上的預設圖形模式(&D):"
+
+#: kde-qt-common/general.cpp:100
+msgid ""
+"You can select the default graphics mode here."
+"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
+"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
+"boot time."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+"您可以在這邊選擇預設的圖形模式。"
+"<br>如果您希望使用 VGA 圖形模式，您必須在編譯核心時加入 framebuffer 的支援。選擇 <i>詢問</i> 將會在開機時詢問您。"
+"<p>這個會影響所有的核心，如果您希望在每個核心有不同的設定，請到 <i>作業系統</i> 分頁並使用 <i>詳細資料</i>。"
+
+#: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48
+msgid "default"
+msgstr "預設"
+
+#: kde-qt-common/general.cpp:102 kde/Details.cpp:49 qt/Details.cpp:49
+msgid "ask"
+msgstr "詢問"
+
+#: kde-qt-common/general.cpp:103 kde/Details.cpp:50 qt/Details.cpp:50
+msgid "text 80x25 (0)"
+msgstr "文字 80x25 (0)"
+
+#: kde-qt-common/general.cpp:104 kde/Details.cpp:51 qt/Details.cpp:51
+msgid "text 80x50 (1)"
+msgstr "文字 80x50 (1)"
+
+#: kde-qt-common/general.cpp:105 kde/Details.cpp:52 qt/Details.cpp:52
+msgid "text 80x43 (2)"
+msgstr "文字 80x43 (2)"
+
+#: kde-qt-common/general.cpp:106 kde/Details.cpp:53 qt/Details.cpp:53
+msgid "text 80x28 (3)"
+msgstr "文字 80x28 (3)"
+
+#: kde-qt-common/general.cpp:107 kde/Details.cpp:54 qt/Details.cpp:54
+msgid "text 80x30 (4)"
+msgstr "文字 80x30 (4)"
+
+#: kde-qt-common/general.cpp:108 kde/Details.cpp:55 qt/Details.cpp:55
+msgid "text 80x34 (5)"
+msgstr "文字 80x34 (5)"
+
+#: kde-qt-common/general.cpp:109 kde/Details.cpp:56 qt/Details.cpp:56
+msgid "text 80x60 (6)"
+msgstr "文字 80x60 (6)"
+
+#: kde-qt-common/general.cpp:110 kde/Details.cpp:57 qt/Details.cpp:57
+msgid "text 40x25 (7)"
+msgstr "文字 40x25 (7)"
+
+#: kde-qt-common/general.cpp:111 kde/Details.cpp:58 qt/Details.cpp:58
+msgid "VGA 640x480, 256 colors (769)"
+msgstr "VGA 640x480, 256 色 (769)"
+
+#: kde-qt-common/general.cpp:112 kde/Details.cpp:59 qt/Details.cpp:59
+msgid "VGA 640x480, 32767 colors (784)"
+msgstr "VGA 640x480, 32767 色 (784)"
+
+#: kde-qt-common/general.cpp:113 kde/Details.cpp:60 qt/Details.cpp:60
+msgid "VGA 640x480, 65536 colors (785)"
+msgstr "VGA 640x480, 65536 色 (785)"
+
+#: kde-qt-common/general.cpp:114 kde/Details.cpp:61 qt/Details.cpp:61
+msgid "VGA 640x480, 16.7M colors (786)"
+msgstr "VGA 640x480, 16.7M 色 (786)"
+
+#: kde-qt-common/general.cpp:115 kde/Details.cpp:62 qt/Details.cpp:62
+msgid "VGA 800x600, 256 colors (771)"
+msgstr "VGA 800x600, 256 色 (771)"
+
+#: kde-qt-common/general.cpp:116 kde/Details.cpp:63 qt/Details.cpp:63
+msgid "VGA 800x600, 32767 colors (787)"
+msgstr "VGA 800x600, 32767 色 (787)"
+
+#: kde-qt-common/general.cpp:117 kde/Details.cpp:64 qt/Details.cpp:64
+msgid "VGA 800x600, 65536 colors (788)"
+msgstr "VGA 800x600, 65536 色 (788)"
+
+#: kde-qt-common/general.cpp:118 kde/Details.cpp:65 qt/Details.cpp:65
+msgid "VGA 800x600, 16.7M colors (789)"
+msgstr "VGA 800x600, 16.7M 色 (789)"
+
+#: kde-qt-common/general.cpp:119 kde/Details.cpp:66 qt/Details.cpp:66
+msgid "VGA 1024x768, 256 colors (773)"
+msgstr "VGA 1024x768, 256 色 (773)"
+
+#: kde-qt-common/general.cpp:120 kde/Details.cpp:67 qt/Details.cpp:67
+msgid "VGA 1024x768, 32767 colors (790)"
+msgstr "VGA 1024x768, 32767 色 (790)"
+
+#: kde-qt-common/general.cpp:121 kde/Details.cpp:68 qt/Details.cpp:68
+msgid "VGA 1024x768, 65536 colors (791)"
+msgstr "VGA 1024x768, 65536 色 (791)"
+
+#: kde-qt-common/general.cpp:122 kde/Details.cpp:69 qt/Details.cpp:69
+msgid "VGA 1024x768, 16.7M colors (792)"
+msgstr "VGA 1024x768, 16.7M 色 (792)"
+
+#: kde-qt-common/general.cpp:123 kde/Details.cpp:70 qt/Details.cpp:70
+msgid "VGA 1280x1024, 256 colors (775)"
+msgstr "VGA 1280x1024, 256 色 (775)"
+
+#: kde-qt-common/general.cpp:124 kde/Details.cpp:71 qt/Details.cpp:71
+msgid "VGA 1280x1024, 32767 colors (793)"
+msgstr "VGA 1280x1024, 32767 色 (793)"
+
+#: kde-qt-common/general.cpp:125 kde/Details.cpp:72 qt/Details.cpp:72
+msgid "VGA 1280x1024, 65536 colors (794)"
+msgstr "VGA 1280x1024, 65536 色 (794)"
+
+#: kde-qt-common/general.cpp:126 kde/Details.cpp:73 qt/Details.cpp:73
+msgid "VGA 1280x1024, 16.7M colors (795)"
+msgstr "VGA 1280x1024, 16.7M 色 (795)"
+
+#: kde-qt-common/general.cpp:130
+msgid "Enter LILO &prompt automatically"
+msgstr "自動進入 LILO 提示(&P)"
+
+#: kde-qt-common/general.cpp:131
+msgid ""
+"If this box is checked, LILO goes to the LILO prompt whether or not a key is "
+"pressed. If it is turned off, LILO boots the default operating system unless "
+"shift is pressed (in that case, it goes to the LILO prompt)."
+"<br>This sets the <i>prompt</i> option in lilo.conf."
+msgstr ""
+"如果核取這個方塊，不論是否有按下按鍵都會出現 LILO 提示。如果關閉， LILO 將會啟動預設的作業系統，除非您按下“shift”（這樣就會進入 LILO "
+"提示）。"
+"<br>這個會設定 lilo.conf 中的 <i>prompt</i> 選項。"
+
+#: kde-qt-common/images.cpp:53
+msgid ""
+"This is the list of kernels and operating systems you can currently boot. "
+"Select which one you want to edit here."
+msgstr "這是目前您可以啟動的核心與作業系統清單。請選擇您所要編輯的作業系統。"
+
+#: kde-qt-common/images.cpp:59 kde-qt-common/images.cpp:281
+msgid "&Kernel:"
+msgstr "核心(&K):"
+
+#: kde-qt-common/images.cpp:60 kde-qt-common/images.cpp:187
+msgid "Enter the filename of the kernel you want to boot here."
+msgstr "請在這邊輸入您要開機的核心檔案名稱。"
+
+#: kde-qt-common/images.cpp:62 kde-qt-common/images.cpp:188
+#: kde-qt-common/images.cpp:216
+msgid "&Label:"
+msgstr "標籤(&L):"
+
+#: kde-qt-common/images.cpp:63 kde-qt-common/images.cpp:188
+msgid "Enter the label (name) of the kernel you want to boot here."
+msgstr "請在這邊輸入您要開機的核心的標籤（名稱）。"
+
+#: kde-qt-common/images.cpp:65 kde-qt-common/images.cpp:189
+msgid "&Root filesystem:"
+msgstr "根檔案系統(&R):"
+
+#: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189
+msgid ""
+"Enter the root filesystem (i.e. the partition that will be mounted as / at boot "
+"time) for the kernel you want to boot here."
+msgstr "請在這邊輸入您核心所需的根檔案系統（在開機時被掛載於 / 的分割區）。"
+
+#: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190
+msgid "&Initial ramdisk:"
+msgstr "初始化記憶體磁碟(&I):"
+
+#: kde-qt-common/images.cpp:69 kde-qt-common/images.cpp:190
+msgid ""
+"If you want to use an initial ramdisk (initrd) for this kernel, enter its "
+"filename here. Leave this field blank if you don't intend to use an initial "
+"ramdisk for this kernel."
+msgstr "如果您希望在這個核心上使用初始化記憶體磁碟(initrd)，請在這邊輸入檔案名稱。否則請留下空白。"
+
+#: kde-qt-common/images.cpp:71
+msgid "E&xtra parameters:"
+msgstr "額外參數(&X):"
+
+#: kde-qt-common/images.cpp:72
+msgid ""
+"Enter any extra parameters you wish to pass to the kernel here. Usually, this "
+"can be left blank."
+"<br>This sets the <i>append</i> option in lilo.conf."
+msgstr "在這邊輸入任何您希望傳遞給核心的額外參數。通常您可以保留空白。<br>這會設定 lilo.conf 中的<i>append</i>選項。"
+
+#: kde-qt-common/images.cpp:79
+msgid "Set &Default"
+msgstr "設為預設值(&D)"
+
+#: kde-qt-common/images.cpp:80
+msgid "Boot this kernel/OS if the user doesn't make a different choice"
+msgstr "如果使用者沒有另外指定，啟動這個核心/作業系統。"
+
+#: kde-qt-common/images.cpp:82
+msgid "De&tails"
+msgstr "詳細資料(&T)"
+
+#: kde-qt-common/images.cpp:83
+msgid ""
+"This button brings up a dialog box with further, less commonly used, options."
+msgstr "這個按鈕開啟一些進階但較少使用的參數對話窗。"
+
+#: kde-qt-common/images.cpp:85
+msgid "&Probe"
+msgstr "偵測(&P)"
+
+#: kde-qt-common/images.cpp:87
+msgid ""
+"Automatically generate a (hopefully) reasonable lilo.conf for your system"
+msgstr "自動產生一個適當的（希望如此） lilo.conf 給您的系統"
+
+#: kde-qt-common/images.cpp:88
+msgid "&Check Configuration"
+msgstr "檢查組態設定(&C):"
+
+#: kde-qt-common/images.cpp:90
+msgid "Run LILO in test mode to see if the configuration is ok"
+msgstr "以測試模式執行 LILO 以確定組態檔是正確的"
+
+#: kde-qt-common/images.cpp:91
+msgid "Add &Kernel..."
+msgstr "增加核心(&K)..."
+
+#: kde-qt-common/images.cpp:93
+msgid "Add a new Linux kernel to the boot menu"
+msgstr "增加新的 Linux 核心到開機選單"
+
+#: kde-qt-common/images.cpp:94
+msgid "Add Other &OS..."
+msgstr "增加其他作業系統(&O)..."
+
+#: kde-qt-common/images.cpp:96
+msgid "Add a non-Linux OS to the boot menu"
+msgstr "增加一個非 Linux 作業系統到開機選單"
+
+#: kde-qt-common/images.cpp:97
+msgid "&Remove Entry"
+msgstr "移除項目(&R)"
+
+#: kde-qt-common/images.cpp:99
+msgid "Remove entry from the boot menu"
+msgstr "從開機選單移除項目"
+
+#: kde-qt-common/images.cpp:177
+msgid ""
+"Configuration ok. LILO said:\n"
+msgstr ""
+"組態正確。 LILO 說：\n"
+
+#: kde-qt-common/images.cpp:178
+msgid "Configuration OK"
+msgstr "組態設定正確"
+
+#: kde-qt-common/images.cpp:180
+msgid ""
+"Configuration NOT ok. LILO said:\n"
+msgstr ""
+"組態不正確。 LILO 說：\n"
+
+#: kde-qt-common/images.cpp:181
+msgid "Configuration NOT ok"
+msgstr "組態設定不正確"
+
+#: kde-qt-common/images.cpp:187
+msgid "&Kernel filename:"
+msgstr "核心檔案名稱(&K):"
+
+#: kde-qt-common/images.cpp:215
+msgid "Boot from dis&k:"
+msgstr "從磁碟開機(&K):"
+
+#: kde-qt-common/images.cpp:215
+msgid ""
+"Enter the partition containing the operating system you'd like to boot here."
+msgstr "在這邊輸入包含您希望啟動之作業系統的分割區。"
+
+#: kde-qt-common/images.cpp:216
+msgid "Enter the label (name) of the operating system here."
+msgstr "在這邊輸入作業系統的標籤（名稱）。"
+
+#: kde-qt-common/images.cpp:297
+msgid "Dis&k:"
+msgstr "磁碟(&K):"
+
+#: kde-qt-common/mainwidget.cpp:43
+msgid "&General Options"
+msgstr "一般選項(&G)"
+
+#: kde-qt-common/mainwidget.cpp:44
+msgid "&Operating Systems"
+msgstr "作業系統(&O)"
+
+#: kde-qt-common/mainwidget.cpp:45 kde-qt-common/mainwidget.cpp:65
+#: kde-qt-common/mainwidget.cpp:94 kde-qt-common/mainwidget.cpp:100
+msgid "&Expert"
+msgstr "專家模式(&E)"
+
+#: kde-qt-common/mainwidget.cpp:96 kde-qt-common/mainwidget.cpp:104
+msgid "&General options"
+msgstr "一般選項(&G)"
+
+#: kde-qt-common/mainwidget.cpp:98 kde-qt-common/mainwidget.cpp:102
+msgid "&Operating systems"
+msgstr "作業系統(&O)"
+
+#: kde/Details.cpp:44 qt/Details.cpp:44
+msgid "&Graphics mode on text console:"
+msgstr "在文字終端機上使用圖形模式(&G):"
+
+#: kde/Details.cpp:47 qt/Details.cpp:47
+msgid ""
+"You can select the graphics mode for this kernel here."
+"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
+"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
+"boot time."
+msgstr ""
+"您可以在這邊選擇核心所使用的圖形模式。"
+"<br>如果您要使用 VGA 圖形模式，您必須在編譯核心時加入 framebuffer 的支援。選擇 <i>詢問</i> 將會在開機時詢問您。"
+
+#: kde/Details.cpp:75 qt/Details.cpp:76
+msgid "Mount root filesystem &read-only"
+msgstr "以唯讀方式掛載根檔案系統(&R)"
+
+#: kde/Details.cpp:76 qt/Details.cpp:77
+msgid ""
+"Mount the root filesystem for this kernel read-only. Since the init scripts "
+"normally take care of remounting the root filesystem in read-write mode after "
+"running some checks, this should always be turned on."
+"<br>Don't turn this off unless you know what you're doing."
+msgstr ""
+"啟動這個核心時要以唯讀方式掛載的檔案系統。一般而言， init 命令稿會在一些檢查之後，將根檔案系統重新掛載為讀寫模式，這應該要被開啟。"
+"<br>不要關閉這個功能除非您非常確定。"
+
+#: kde/Details.cpp:78 qt/Details.cpp:80
+msgid "Do not check &partition table"
+msgstr "不要檢查分割表(&P)"
+
+#: kde/Details.cpp:79
+msgid ""
+"This turns off some sanity checks while writing the configuration. This should "
+"not be used under \"normal\" circumstances, but it can be useful, for example, "
+"by providing the capability of booting from a floppy disk, without having a "
+"floppy in the drive every time you run lilo."
+"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+msgstr ""
+"這個功能關閉一些寫入設定檔時的檢查。在“一般”的情形下，這不應該被使用，但是這仍是有用的，例如提供自軟碟開機的功能而不需要在每次執行 lilo 時放入軟碟片。"
+"<br>這會設定 lilo.conf 中的 <i>unsafe</i> 關鍵字。"
+
+#: kde/Details.cpp:83 qt/Details.cpp:86
+msgid ""
+"Checking this box enables automatic recording of boot command lines as the "
+"default for the following bootups. This way, lilo \"locks\" on a choice until "
+"it is manually overridden."
+"<br>This sets the <b>lock</b> option in lilo.conf"
+msgstr ""
+"啟動這個功能以啟動自動紀錄開機指令的功能，並將之作為往後開機的預設值。這種方式會讓 LILO “鎖定”這個選擇直到手動變更。"
+"<br>這會設定 lilo.conf 中的 <b>lock</b> 選項。"
+
+#: kde/Details.cpp:86 qt/Details.cpp:89
+msgid ""
+"If this box is checked, a password (entered below) is required only if any "
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
+"linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"This sets the <b>restricted</b> option in lilo.conf."
+msgstr ""
+"如果核取這個方塊，要變更任何參數時，在下面輸入的密碼是必須的。也就是使用者可以啟動 <i>linux</i> 但不能使用 <i>linux single</i> "
+"或 <i>linux init=/bin/sh</i>。\n"
+"這會設定 lilo.conf 中的 <b>restricted</b> 選項。"
+
+#: kde/Details.cpp:94 qt/Details.cpp:98
+msgid ""
+"Enter the password required for bootup (if any) here. If <i>restricted</i> "
+"above is checked, the password is required for additional parameters only."
+"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
+"You'll want to make sure nobody untrusted can read this file. Also, you "
+"probably don't want to use your normal/root password here."
+msgstr ""
+"在這邊輸入開機時需要的密碼（如果有的話）。如果使用了上面的 <i>限制參數</i> 功能，必須要使用這個密碼才能變更參數。"
+"<br><b>警告：</b> 這個密碼是以未編碼的方式存在 /etc/lilo.conf "
+"中。您必須確定未授權的人不能讀取這個檔案。同時，建議不要使用您的一般/管理者密碼。"
+
+#: kde/kcontrol.cpp:48
+msgid "kcmlilo"
+msgstr "kcmlilo"
+
+#: kde/kcontrol.cpp:48
+msgid "LILO Configuration"
+msgstr "LILO 組態"
+
+#: kde/kcontrol.cpp:50
+msgid "(c) 2000, Bernhard Rosenkraenzer"
+msgstr "(c) 2000, Bernhard Rosenkraenzer"
+
+#: qt/Details.cpp:81
+msgid ""
+"This turns off some sanity checks while writing the configuration. This "
+"shouldn't be used under \"normal\" circumstances, but it's useful, for example, "
+"for installing the possibility to boot from a floppy disk without having a "
+"floppy in the drive every time you run lilo."
+"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+msgstr ""
+"這個功能關閉一些寫入設定檔時的檢查，在“一般”的情形下，這不應該被使用。但是這仍是有用的，例如提供自軟碟開機的功能而不需要在每次執行 lilo 時放入軟碟片。"
+"<br>這會設定 lilo.conf 中的 <i>unsafe</i> 關鍵字。"
+
+#: qt/standalone.cpp:41
+msgid "&What's This?"
+msgstr "這是什麼？(&W)"
+
+#: qt/standalone.cpp:43
+msgid ""
+"The <i>What's This?</i> button is part of this program's help system. Click on "
+"the What's This? button then on any widget in the window to get information "
+"(like this) on it."
+msgstr "<i>這是什麼？</i> 按鈕是這個程式說明系統的一部份。按下這個按鈕以及任何程式元件以取得像這樣的說明視窗。"
+
+#: qt/standalone.cpp:47
+msgid ""
+"This button calls up the program's online help system. If it does nothing, no "
+"help file has been written (yet); in that case, use the <i>What's This</i> "
+"button on the left."
+msgstr "這個按鈕呼叫程式的線上說明系統。如果它沒有作用，是因為目前沒有說明檔案；此時，請使用右邊的 <i>這是什麼？</i> 按鈕。"
+
+#: qt/standalone.cpp:49
+msgid "&Default"
+msgstr "預設(&D)"
+
+#: qt/standalone.cpp:50
+msgid ""
+"This button resets all parameters to some (hopefully sane) default values."
+msgstr "這個按鈕重設所有的參數回預設值。"
+
+#: qt/standalone.cpp:52
+msgid "&Reset"
+msgstr "重設(&R)"
+
+#: qt/standalone.cpp:53
+msgid ""
+"This button resets all parameters to what they were before you started the "
+"program."
+msgstr "這個按鈕重設所有的參數回到您啟動此應用程式前的狀況。"
+
+#: qt/standalone.cpp:56
+msgid "This button saves all your changes without exiting."
+msgstr "這個按鈕儲存您的設定但不關閉程式。"
+
+#: qt/standalone.cpp:59
+msgid "This button saves all your changes and exits the program."
+msgstr "這個按鈕儲存您的設定並關閉程式。"
+
+#: qt/standalone.cpp:62
+msgid "This button exits the program without saving your changes."
+msgstr "這個按鈕關閉程式而不儲存您的設定。"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Chao-Hsiung Liao"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "pesder.liao@msa.hinet.net"