diff options
Diffstat (limited to 'starttde')
| -rwxr-xr-x | starttde | 356 |
1 files changed, 190 insertions, 166 deletions
@@ -3,6 +3,15 @@ # DEFAULT TRINITY STARTUP SCRIPT # +# Paths and environment variables in this script must match the expected +# directory locations found in tdelibs/tdecore/tdestandarddirs.h and +# tdestandarddirs.cpp. + +# Until TDE supports being installed in /usr, part of this script is +# intended to avoid potential conflicts with KDE. + +# Within this script use full path names to all binaries, scripts, etc. + # This block might not be appropriate for all systems. # It should work for command line logins but graphical # login managers might already source these files. @@ -15,7 +24,7 @@ if [ -r $HOME/.xprofile ]; then . $HOME/.xprofile fi -# Some functions to parse and check path correctly ... +# Function to check PATH. # Usage: is_in_path PATH /usr/bin is_in_path() { var="$1"; search="$2"; @@ -27,6 +36,7 @@ is_in_path() { return 1 } +# Function to check TDE directory is in PATH in the correct order. # Usage: is_before_in_path ENV_VAR var before_var # Return 0 if 'var' is before 'before_var' in 'ENV_VAR', 1 otherwise is_before_in_path() { @@ -40,6 +50,7 @@ is_before_in_path() { return 1 } +# Function to place TDE directory in PATH in the correct order. # Usage: place_before_in_path PATH /opt/trinity/games /usr/games place_before_in_path() { var="$1"; insert="$2"; @@ -56,6 +67,7 @@ place_before_in_path() { fi } +# Function to remove TDE directory from PATH. # Usage: remove_from_path PATH /opt/trinity/games remove_from_path() { var="$1"; remove="$2"; @@ -77,22 +89,18 @@ is_newer() { return 1 } +# echo messages should appear in the user's .xsession-errors log. echo "[starttde] Starting starttde." 1>&2 echo "[starttde] This script is $0" 1>&2 -# Avoid any possible conflict with KDE4. Therefore within this script -# use full path names to all binaries used. - # The binaries for TDE are located in the same place as this script. -# To determine that location use the following method rather than presuming -# the existence of $TDEDIR. That environment variable might not be -# defined or defined to point to KDE4 binaries. +# To determine that location use the following method rather than +# presuming the existence of $TDEDIR. That environment variable might +# not be defined or defined to point to KDE binaries. BIN_DIR="" - -# Let's check if this script is called from the Debian alternatives +# Check if this script is called from the Debian alternatives. # See: https://wiki.debian.org/DebianAlternatives -if [ "$(readlink -- "$0")" = "/etc/alternatives/x-session-manager" ] -then +if [ "$(readlink -- "$0")" = "/etc/alternatives/x-session-manager" ]; then # Check if it is not a dangling symlink if [ -L "/etc/alternatives/x-session-manager" ] && \ [ -e "/etc/alternatives/x-session-manager" ] @@ -131,9 +139,9 @@ if kcheckrunning >/dev/null 2>&1; then fi # Set the background color. -# The standard X background is nasty, causing moire effects and exploding -# people's heads. We use colours from the standard TDE palette for those with -# palettised displays. +# The standard X background is nasty, causing moire effects and +# exploding people's heads. We use colours from the standard TDE palette +# for those with palettised displays. if test -z "$XDM_MANAGED" || echo "$XDM_MANAGED" | grep ",auto" > /dev/null; then xsetroot -solid "#618DCC" # sky blue fi @@ -141,9 +149,10 @@ fi # Unset this for Darwin since it will screw up TDE's dynamic-loading. unset DYLD_FORCE_FLAT_NAMESPACE -# Check whether prelinking is enabled. If yes, then exporting TDE_IS_PRELINKED improves -# loading TDE. The $TDE_IS_PRELINKED variable might already be set on some systems -# through /etc/profile.d. Therefore first check whether the variable exists. +# Check whether prelinking is enabled. If yes, then exporting +# TDE_IS_PRELINKED improves loading TDE. The $TDE_IS_PRELINKED variable +# might already be set on some systems through /etc/profile.d. Therefore +# first check whether the variable exists. if [ "$TDE_IS_PRELINKED" = "" ]; then if [ -r /etc/default/prelink ]; then . /etc/default/prelink @@ -157,93 +166,80 @@ fi # Boot sequence: # -# tdeinit is used to fork off processes which improves memory usage -# and startup time. +# tdeinit is used to fork processes to improve memory usage and +# startup time. # -# * tdeinit starts the dcopserver and tdelauncher first. -# * Then kded is started. kded is responsible for keeping the sycoca -# database up to date. When an up to date database is present it goes +# * tdeinit first starts dcopserver and tdelauncher. +# * Then kded is started, which is responsible for keeping the sycoca +# database up to date. When the database is updated the process goes # into the background and the startup continues. -# * Then tdeinit starts kcminit. kcminit performs initialisation of -# certain devices according to the user's settings -# -# * Then ksmserver is started which takes control of the rest of the startup sequence. - -# The user's personal TDE directory usually is $HOME/.trinity. -# This setting may be overridden by setting $TDEHOME. When migrating profiles -# must be careful here because $HOME/.kde was used commonly in the pre-KDE4 -# days for the user's TDE profile, but now with KDE4 common on systems, -# $HOME/.kde might point to KDE4 profile settings. The existence of KDE4 -# does not mean all people are using KDE4. - -if [ "$TDEHOME" != "" ]; then - echo "[starttde] TDEHOME is preset to $TDEHOME." 1>&2 - export TDEHOME=$TDEHOME -else - # $TDEHOME is NOT already preset in the environment. Try to help. - # This might be overkill but does provide flexibility. - # This script and kstandardirs.h and kstandardirs.cpp must match. - # The latter two must be edited/patched before compiling. - echo "[starttde] TDEHOME is not set." 1>&2 - # Default value: $HOME/.trinity. Most users will use this. +# * Then tdeinit starts kcminit. kcminit initializes devices according +# to the user's settings. +# * Then ksmserver starts and takes control of the remainder of the +# startup sequence. + +# The user's personal TDE directory usually is $HOME/.trinity. This setting +# may be overridden by setting $TDEHOME. +if [ "$TDEHOME" = "" ]; then + # Note: the default for TDEHOME must match the one in tdestandarddirs.h export TDEHOME=$HOME/.trinity - - if [ ! -d $HOME/.trinity ] && [ ! -f /usr/bin/kde4-config ] && [ "$TDEDIR" = "/usr" ] && [ -d $HOME/.kde ]; then - # Looks like Trinity is installed and not playing second fiddle to KDE4. - export TDEHOME=$HOME/.kde - fi - echo "[starttde] Set TDEHOME to $TDEHOME." 1>&2 fi +echo "[starttde] TDEHOME is set to $TDEHOME." 1>&2 -# tdesu needs something to find root's TDE profile. Set the TDEROOTHOME variable -# here as last resort. /root/.trinity is a safe presumption. If an admin wants -# a different location then set the TDEROOTHOME variable elsewhere. +# tdesu needs something to find root's TDE profile. Set the TDEROOTHOME +# variable here as a last resort. /root/.trinity is a safe presumption. +# If an admin wants a different location then set the TDEROOTHOME variable +# elsewhere. if [ "$TDEROOTHOME" = "" ]; then export TDEROOTHOME=/root/.trinity echo "[starttde] Setting TDEROOTHOME to $TDEROOTHOME." fi -# Modify the following environment variables only as necessary. - +# Modify the PATH environment variable only as necessary. +if [ -d /usr/games -o -d "$TDEDIR/games" ] || is_in_path PATH "/usr/games"; then + # Some distributions (e.g. Gentoo) don't use a separate directory for games. + # So don't add it to PATH unless there are any indications that in might be + # actually needed. if ! is_in_path PATH "$TDEDIR/games" ; then # Respect the traditional path order. Don't blindly place $TDEDIR/games # first in the path. Only place $TDEDIR/games before /usr/games. If packagers # are adding $TDEDIR/games elsewhere, then they need to ensure the traditional # search patch is respected. - # Is there a way we can check that $TDEDIR/games is always placed only just before - # /usr/games in the search path? + # This order is consistent with tdelibs/tdesu/stub.cpp. if is_in_path PATH "/usr/games"; then place_before_in_path PATH "$TDEDIR/games" "/usr/games" else export PATH=$TDEDIR/games:$PATH fi fi +fi - if ! is_in_path PATH "$TDEDIR/bin" ; then - # Respect the traditional path order. Don't blindly place $TDEDIR/bin - # first in the path. Only place $TDEDIR/bin before /usr/bin. This order is - # consistent with tdelibs/tdesu/stub.cpp. If packagers are adding $TDEDIR/bin - # elsewhere, then they need to ensure the traditional search patch is respected. - # Is there a way we can check that $TDEDIR/bin is always placed only just before - # /usr/bin in the search path? - if is_in_path PATH "/usr/bin"; then - place_before_in_path PATH "$TDEDIR/bin" "/usr/bin" - else - export PATH=$TDEDIR/bin:$PATH - fi - fi - - if [ -x /usr/bin/manpath ]; then - if [ "`manpath 2>/dev/null | grep \"$TDEDIR/share/man\"`" = "" ]; then - export MANPATH=$TDEDIR/share/man:$MANPATH - fi +# Modify the PATH environment variable only as necessary. +if ! is_in_path PATH "$TDEDIR/bin" ; then + # Respect the traditional path order. Don't blindly place $TDEDIR/bin first + # in the path. Only place $TDEDIR/bin before /usr/bin. If packagers are adding + # $TDEDIR/bin elsewhere, then they need to ensure the traditional search patch + # is respected. + # This order is consistent with tdelibs/tdesu/stub.cpp. + if is_in_path PATH "/usr/bin"; then + place_before_in_path PATH "$TDEDIR/bin" "/usr/bin" else - if [ "`echo $MANPATH | grep \"$TDEDIR/share/man\"`" = "" ]; then - export MANPATH=$TDEDIR/share/man:$MANPATH - fi + export PATH=$TDEDIR/bin:$PATH fi +fi +# Modify the MANPATH environment variable only as necessary. +if [ -x /usr/bin/manpath ]; then + if [ "$(manpath 2>/dev/null | grep "$TDEDIR/share/man")" = "" ]; then + export MANPATH=$TDEDIR/share/man:$MANPATH + fi +else + if [ "$(echo $MANPATH | grep "$TDEDIR/share/man")" = "" ]; then + export MANPATH=$TDEDIR/share/man:$MANPATH + fi +fi +# Set the XDG_CONFIG_DIRS environment variable. if [ "$XDG_CONFIG_DIRS" = "" ]; then if [ -d /etc/xdg ]; then XDG_CONFIG_DIRS=/etc/xdg @@ -267,7 +263,7 @@ elif [ -d $TDEDIR/tde/xdg ]; then TDE_XDG_DIR="$TDEDIR/tde/xdg" fi if [ -d $TDE_XDG_DIR ]; then - if [ "`echo $XDG_CONFIG_DIRS | grep \"$TDE_XDG_DIR\"`" = "" ]; then + if [ "$(echo $XDG_CONFIG_DIRS | grep "$TDE_XDG_DIR")" = "" ]; then if [ "$XDG_CONFIG_DIRS" = "" ]; then XDG_CONFIG_DIRS=$TDE_XDG_DIR else @@ -279,6 +275,8 @@ if [ "$XDG_CONFIG_DIRS" != "" ]; then export XDG_CONFIG_DIRS fi +echo "[starttde] XDG_CONFIG_DIRS: $XDG_CONFIG_DIRS" 1>&2 + # Explicitly set $XDG_DATA_DIRS only when Trinity is not installed in /usr. # Explicitly declaring $XDG_DATA_DIRS will override the default search path of /usr/share. # Explicitly declaring $XDG_DATA_DIRS will override $TDEDIRS, which must then be @@ -289,10 +287,11 @@ fi # set in $TDEDIRS are intended to override data files found in $TDEDIR. Those additional # directories should be placed before $TDEDIR and before /usr/share. if [ "$TDEDIR" != "/usr" ] && [ -d $TDEDIR/share ]; then - # If '/usr/share' is not already there, we include it at the last position. + # Include '/usr/share' only if missing and only at the last position. if ! is_in_path XDG_DATA_DIRS "/usr/share"; then + # If XDG_DATA_DIRS is empty then avoid a leading ':'. if [ "$XDG_DATA_DIRS" = "" ]; then - XDG_DATA_DIRS=/usr/share # In case XDG_DATA_DIRS is empty, to avoid a leading : + XDG_DATA_DIRS=/usr/share else XDG_DATA_DIRS=$XDG_DATA_DIRS:/usr/share fi @@ -300,7 +299,7 @@ if [ "$TDEDIR" != "/usr" ] && [ -d $TDEDIR/share ]; then # If '/usr/local/share' is not already there, we include it before '/usr/share' if ! is_in_path XDG_DATA_DIRS "/usr/local/share"; then place_before_in_path XDG_DATA_DIRS "/usr/local/share" "/usr/share" - fi + fi # Ensure that $TDEDIR/share is always before '/usr/local/share' and '/usr/share'. if ! is_in_path XDG_DATA_DIRS "$TDEDIR/share" || @@ -328,24 +327,42 @@ fi echo "[starttde] XDG_DATA_DIRS: $XDG_DATA_DIRS" 1>&2 -test -n "$TDEHOME" && tdehome=`echo "$TDEHOME" | sed "s,^~/,$HOME/,"` +test -n "$TDEHOME" && tdehome=$(echo "$TDEHOME" | sed "s,^~/,$HOME/,") -# Allow interested applications, such as the Plasma control wrapper, -# to know that this is a Trinity desktop and not a KDE one. +# Help non-TDE software identify the desktop environment. +# +# DESKTOP_SESSION is considered legacy but retained for backwards +# compatibility. export DESKTOP_SESSION=trinity - -# Create profile directory. +# XDG_CURRENT_DESKTOP is considered the correct way to identify desktop +# environments. This is the variable xdg-utils uses although xdg-utils +# does not explicitly support TDE. Acceptable desktop identifiers are found in +# Appendix B of the Desktop Menu Specification: +# https://specifications.freedesktop.org/menu-spec/latest/apb.html +# Note: The variable should be already set by most modern DMs (including TDM +# since R14.0.12), but when launching TDE manually via startx, it's unlikely to +# be defined, so set it here. Also note that the variable is allowed to contain +# multiple colon-separated identifiers. +if [ -n "$XDG_CURRENT_DESKTOP" ]; then + echo "[starttde] Setting XDG_CURRENT_DESKTOP=TDE" 1>&2 + export XDG_CURRENT_DESKTOP=TDE +elif ! is_in_path XDG_CURRENT_DESKTOP "TDE"; then + echo "[starttde] Setting XDG_CURRENT_DESKTOP=TDE:$XDG_CURRENT_DESKTOP" 1>&2 + export XDG_CURRENT_DESKTOP=TDE:$XDG_CURRENT_DESKTOP +fi + +# If necessary create the profile directory. if [ ! -d "$tdehome" ]; then echo "[starttde] Creating $tdehome" 1>&2 mkdir -m 700 -p "$tdehome" fi if [ -d "$tdehome" ]; then # Run some R14 updates. - R14_UPDATED="`$TDEDIR/bin/kreadconfig --file kdeglobals --group "R14 XDG Updates" --key Updated --default false`" - R14_VERSION="`$TDEDIR/bin/kreadconfig --file kdeglobals --group "R14 XDG Updates" --key Version --default 0`" + R14_UPDATED="$($TDEDIR/bin/kreadconfig --file kdeglobals --group "R14 XDG Updates" --key Updated --default false)" + R14_VERSION="$($TDEDIR/bin/kreadconfig --file kdeglobals --group "R14 XDG Updates" --key Version --default 0)" if [ -e $TDEDIR/bin/r14-xdg-update ]; then # Script version index is used to allow automatic rerun - R14_SCRIPT="`sed -n "s/SCRIPT_VERSION=\([0-9]*\)/\1/p" $TDEDIR/bin/r14-xdg-update`" + R14_SCRIPT="$(sed -n "s/SCRIPT_VERSION=\([0-9]*\)/\1/p" $TDEDIR/bin/r14-xdg-update)" else R14_SCRIPT=0 fi @@ -364,6 +381,12 @@ if [ -d "$tdehome" ]; then fi fi +# Get current font DPI configuration +CUR_ForceFontDPI="$($TDEDIR/bin/kreadconfig --file kcmfonts --group General --key forceFontDPI --default 0)" +CUR_ForceFontDPIEnable=false +[ $CUR_ForceFontDPI -gt 0 ] && CUR_ForceFontDPIEnable=true +unset CUR_ForceFontDPI + # Please see tdestartupconfig source for usage. mkdir -m 700 -p "$tdehome/share" mkdir -m 700 -p "$tdehome/share/config" @@ -377,13 +400,16 @@ kcmrandrrc [Screen0] kcmrandrrc [Screen1] kcmrandrrc [Screen2] kcmrandrrc [Screen3] +kcmfonts General forceFontDPIEnable ${CUR_ForceFontDPIEnable} kcmfonts General forceFontDPI 0 EOF $TDEDIR/bin/tdestartupconfig +unset CUR_ForceFontDPIEnable if test $? -ne 0; then xmessage -center -geometry 500x100 "Could not start tdestartupconfig. Check your installation." fi -# $tdehome/share/config/startupconfig should exist but avoid script failure if not. +# $tdehome/share/config/startupconfig should exist but avoid script +# failure if not. if [ -r "$tdehome/share/config/startupconfig" ]; then . "$tdehome/share/config/startupconfig" fi @@ -400,7 +426,7 @@ EOF fi fi -# XCursor mouse theme needs to be applied here to work even for kded or ksmserver. +# An XCursor mouse theme is needed to work with kded or ksmserver. if test -n "$kcminputrc_mouse_cursortheme" -o -n "$kcminputrc_mouse_cursorsize" ; then kapplymousetheme "$kcminputrc_mouse_cursortheme" "$kcminputrc_mouse_cursorsize" if test $? -eq 10; then @@ -474,18 +500,18 @@ if test -z "$dl" && test "$kpersonalizerrc_general_firstlogin" != "true"; then esac fi -if test "$kcmfonts_general_forcefontdpi" -eq 120; then - xrdb -quiet -merge -nocpp <<EOF -Xft.dpi: 120 -EOF -elif test "$kcmfonts_general_forcefontdpi" -eq 96; then - xrdb -quiet -merge -nocpp <<EOF -Xft.dpi: 96 -EOF +if test "$kcmfonts_general_forcefontdpienable" = "true"; then + echo "[starttde] Setting font DPI to $kcmfonts_general_forcefontdpi" 1>&2 + tmpfile=$(mktemp /tmp/xft_dpi_settings.XXXXXX) + echo "Xft.dpi: $kcmfonts_general_forcefontdpi" > $tmpfile + xrdb -quiet -merge -nocpp $tmpfile + rm $tmpfile fi # Configuration of the gtk_qt_engine if not already set. +# Is the kgtk package installed? KGtk is a hack to allow some software +# to use the TDE file picker dialog. if test -n "$TDEDIRS"; then tdedirs_first=${TDEDIRS%%:*} TGTK_RC_ENGINE=$tdedirs_first/share/kgtk/gtk-qt-engine.rc.sh @@ -496,39 +522,39 @@ else TGTK_RC_TDE1=$TDEDIR/share/kgtk/.gtkrc-2.0-kde4 TGTK_RC_TDE2=$TDEDIR/share/kgtk/.gtkrc-2.0-kde-kde4 fi - if [ ! -e "$tdehome/env/gtk-qt-engine.rc.sh" ] && [ -e $TGTK_RC_ENGINE ]; then mkdir -p "$tdehome/env" cp -f $TGTK_RC_ENGINE "$tdehome/env" chmod 755 "$tdehome/env/gtk-qt-engine.rc.sh" fi -if [ ! -e $HOME/.gtkrc-2.0-kde4 ] && [ -e $TGTK_RC_TDE1 ] -then +if [ ! -e $HOME/.gtkrc-2.0-kde4 ] && [ -e $TGTK_RC_TDE1 ]; then cp -f $TGTK_RC_TDE1 $HOME fi - -if [ ! -e $HOME/.gtkrc-2.0-kde-kde4 ] && [ -e $TGTK_RC_TDE2 ] -then +if [ ! -e $HOME/.gtkrc-2.0-kde-kde4 ] && [ -e $TGTK_RC_TDE2 ]; then cp -f $TGTK_RC_TDE2 $HOME fi # Source scripts found in <localprefix>/env/*.sh and <prefixes>/env/*.sh # (where <localprefix> is $TDEHOME or ~/.trinity, and <prefixes> is where TDE is installed) # -# This is where you can define environment variables that will be available to -# all TDE programs. That is where to run agents using for example, eval `ssh-agent` -# or eval `gpg-agent --daemon`. -# Note: if you do that, you should also put "ssh-agent -k" as a shutdown script. -# (Read the end of this script for running shutdown scripts). -# For anything else (that doesn't set env vars, or that needs a window manager), -# better use the Autostart folder. - -exepath=`tde-config --path exe | tr : '\n'` - -for prefix in `echo "$exepath" | sed -n -e 's,/bin[^/]*/,/env/,p'`; do +# # This is where to define environment variables that will be +# available to all TDE programs. For example, this is where to run +# agents using eval $(ssh-agent) or eval $(gpg-agent --daemon). +# Note: when doing that also include "ssh-agent -k" as a shutdown +# script. (Read the end of this script for running shutdown +# scripts). For anything else that doesn't set env vars, or needs a +# window manager, best to use the TDE Autostart folder. + +exepath=$(tde-config --path exe | tr : '\n') + +for prefix in $(echo "$exepath" | sed -n -e 's,/bin[^/]*/,/env/,p'); do + echo "[starttde] Looking for sh scripts in $prefix" 1>&2 for file in "$prefix"*.sh; do - test -r "$file" && . "$file" + if [ -r "$file" ]; then + echo "[starttde] Sourcing $file" 1>&2 + . "$file" + fi done done @@ -539,9 +565,9 @@ done # There are two system directories. These belong to the administrator. # There are two user directories, where the user may add her own fonts. # -# The 'override' versions are for fonts that should come first in the list, -# i.e. if you have a font in your 'override' directory, it will be used in -# preference to any other. +# The 'override' versions are for fonts that should come first in the +# list. That is, if you have a font in your 'override' directory, it +# will be used in preference to any other. # # The preference order looks like this: # user override, system override, X, user, system. @@ -560,8 +586,8 @@ if test -r "$tde_fontpaths" ; then savifs=$IFS IFS=" " - for fpath in `grep -v '^[ ]*#' < "$tde_fontpaths"` ; do - rfpath=`echo $fpath | sed "s:^~:$HOME:g"` + for fpath in $(grep -v '^[ ]*#' < "$tde_fontpaths") ; do + rfpath=$(echo $fpath | sed "s:^~:$HOME:g") if test -s "$rfpath"/fonts.dir; then xset fp+ "$rfpath" if test "$rfpath" = "$usr_fdir"; then @@ -609,9 +635,9 @@ if [ "$TGTK_PRELOAD" != "" ]; then export LD_PRELOAD=$TGTK_PRELOAD:$TGTK_NSPR_PRELOAD$LD_PRELOAD fi -# We run mkfontdir on the user's font dirs (if we have permission) to pick -# up any new fonts they may have installed. If mkfontdir fails, we still -# add the user's dirs to the font path, as they might simply have been made +# Run mkfontdir on the user's font dirs (if we have permission) to find +# any new fonts they may have installed. If mkfontdir fails, we still add +# the user's dirs to the font path, as they might simply have been made # read-only by the administrator, for whatever reason. # Only do usr_fdir and usr_odir if they are *not* listed in fontpaths. @@ -631,12 +657,13 @@ xset fp rehash # especially necessary on slow machines, where starting TDE takes one or two # minutes until anything appears on the screen. # -# If the user has overwritten fonts, the cursor font may be different now -# so don't move this up. +# If the user has overwritten fonts, the cursor font may be different +# now so don't move this up. # xsetroot -cursor_name left_ptr -# Get Ghostscript to look into user's TDE fonts dir for additional Fontmap. +# Get Ghostscript to look into user's TDE fonts dir for additional +# Fontmap. if test -n "$GS_LIB" ; then GS_LIB=$usr_fdir:$GS_LIB export GS_LIB @@ -646,11 +673,11 @@ else fi # Link "tmp" "socket" and "cache" resources to directory in $TMP. -# Creates: -# - a directory $TMP/tde-$USER and is linked from $TDEHOME/tmp-$HOSTNAME to it. -# - a directory $TMP/tdesocket-$USER and is linked from $TDEHOME/socket-$HOSTNAME to it. -# - a directory /var/tmp/tdecache-$USER and is linked from $TDEHOME/cache-$HOSTNAME to it. -# Note: temporary locations can be overridden through the TDETMP and TDEVARTMP +# Create: +# $TMP/tde-$USER linked from $TDEHOME/tmp-$HOSTNAME. +# $TMP/tdesocket-$USER linked from $TDEHOME/socket-$HOSTNAME. +# /var/tmp/tdecache-$USER linked from $TDEHOME/cache-$HOSTNAME. +# Temporary locations may be overridden through the TDETMP and TDEVARTMP # environment variables. for resource in tmp cache socket; do if ! lnusertemp $resource >/dev/null; then @@ -691,7 +718,7 @@ fi # Detect any running Xorg composition managers. $TDEDIR/bin/kdetcompmgr -# Run KPersonalizer before the session if this is the first login. +# Run KPersonalizer before the session if this is the first TDE login. if test "$kpersonalizerrc_general_firstlogin" = "true"; then if [ ! -x $TDEDIR/bin/kpersonalizer ]; then echo "[starttde] kpersonalizer not found! Please install in order to properly configure your user profile." 1>&2 @@ -714,7 +741,8 @@ fi $TDEDIR/bin/tdeinit_displayconfig EXIT_CODE="$?" -# Remove moodin cache if we have a new wallpaper installed, jriddell. Distro-specific. +# Remove moodin cache if there is new wallpaper installed. +# jriddell; distro-specific. if [ -d "$tdehome/share/apps/ksplash/cache/Moodin/kubuntu" ]; then if is_newer /usr/share/wallpapers/kubuntu-wallpaper.png \ "$tdehome/share/apps/ksplash/cache/Moodin/kubuntu/" @@ -722,7 +750,7 @@ if [ -d "$tdehome/share/apps/ksplash/cache/Moodin/kubuntu" ]; then rm -rf "$tdehome/share/apps/ksplash/cache/Moodin/kubuntu/" fi fi -# The is_newer function will no longer be used, so we unset it +# The 'is_newer' function will no longer be used, so unset unset is_newer if test -z "$dl"; then @@ -741,12 +769,13 @@ if test -z "$dl"; then esac fi -# Mark that full TDE session is running (for example, Konqueror preloading works only -# with full TDE running). The TDE_FULL_SESSION property can be detected by -# any X client connected to the same X session, even if not launched -# directly from the TDE session but for example, using "ssh -X", tdesu. $TDE_FULL_SESSION -# however guarantees that the application is launched in the same environment -# like the TDE session and that for example, TDE utilities/libraries are available. +# Mark that full TDE session is running (for example, Konqueror +# preloading works only with full TDE running). The TDE_FULL_SESSION +# property can be detected by any X client connected to the same X +# session, even if not launched directly from the TDE session but for +# example, using "ssh -X", tdesu. $TDE_FULL_SESSION guarantees the +# application is launched in the same environment like the TDE session +# and that for example, TDE utilities/libraries are available. # The matching tests are: # For $TDE_FULL_SESSION: # if test -n "$TDE_FULL_SESSION"; then ... whatever @@ -755,18 +784,19 @@ fi # if test $? -eq 0; then ... whatever # # Additionally there is $TDE_SESSION_UID with the uid of the user -# running the TDE session. It should be rarely needed (for example, -# after sudo to prevent desktop-wide functionality in the new user's kded). -# +# running the TDE session. That rarely should be needed (for example, +# after sudo to prevent desktop-wide functionality in the new user's +# kded). + TDE_FULL_SESSION=true export TDE_FULL_SESSION xprop -root -f TDE_FULL_SESSION 8s -set TDE_FULL_SESSION true echo "[starttde] TDE_FULL_SESSION: $TDE_FULL_SESSION" 1>&2 -TDE_SESSION_UID=`id -u` +TDE_SESSION_UID=$(id -u) export TDE_SESSION_UID echo "[starttde] TDE_SESSION_UID: $TDE_SESSION_UID" 1>&2 -# We set LD_BIND_NOW to increase the efficiency of tdeinit. +# Set LD_BIND_NOW to increase the efficiency of tdeinit. # tdeinit unsets this variable before loading applications. LD_BIND_NOW=true $TDEDIR/bin/start_tdeinit_wrapper --new-startup +kcminit_startup if test $? -ne 0; then @@ -776,17 +806,16 @@ if test $? -ne 0; then fi echo "[starttde] tdeinit started successfully." 1>&2 -# Finally, give the session control to the session manager. -# See tdebase/ksmserver for the description of the rest of the startup sequence. -# When set, the TDEWM environment variable will be used as Trinity's -# window manager instead of twin. -# When TDEWM is not set, ksmserver will ensure twin is started. +# Finally, give the session control to the session manager. Refer to +# tdebase/ksmserver for the description of the remainder of the startup +# sequence. When set, the TDEWM environment variable will be used as +# Trinity's window manager instead of twin. When TDEWM is not set then +# ksmserver will ensure twin is started. # kwrapper is used to reduce startup time and memory usage. -# kwrapper does not return useful error codes such as the exit code of ksmserver. -# We only check for 255, which means the ksmserver process could not be -# started. Any problems thereafter, for example, ksmserver failing to initialize, -# will remain undetected. -# tdeinit_phase1 is still experimental. +# kwrapper does not return useful error codes such as the exit code of +# ksmserver. Thus only check for 255, which means ksmserver could not +# start. Any problems thereafter, for example, ksmserver failing to +# initialize, remain undetected. $TDEDIR/bin/tdeinit_phase1 EXIT_CODE="$?" # If tdeinit_phase1 should cause problems, here is the old way: @@ -810,10 +839,6 @@ echo "[starttde] Shutting down Trinity..." 1>&2 $TDEDIR/bin/tdeinit_shutdown $TDEDIR/bin/dcopserver_shutdown --wait $TDEDIR/bin/artsshell -q terminate -# KDE4 support. -if [ -f /usr/bin/kdeinit4_shutdown ]; then - /usr/bin/kde4 kdeinit4_shutdown 2>/dev/null -fi echo "[starttde] Running Trinity shutdown scripts..." 1>&2 @@ -824,8 +849,8 @@ echo "[starttde] Running Trinity shutdown scripts..." 1>&2 # Presumed is $TDEDIRS/bin exists. Create $TDEDIRS/bin even when # only using the shutdown directory or this snippet will fail to find # that shutdown directory. -for prefix in `echo "$exepath" | sed -n -e 's,/bin[^/]*/,/shutdown/,p'`; do - for file in `ls "$prefix" 2> /dev/null | egrep -v '(~|\.bak)$'`; do +for prefix in $(echo "$exepath" | sed -n -e 's,/bin[^/]*/,/shutdown/,p'); do + for file in $(ls "$prefix" 2> /dev/null | egrep -v '(~|\.bak)$'); do if [ -x "${prefix}${file}" ]; then echo "[starttde] Running ${prefix}${file}." 1>&2 sh ${prefix}${file} @@ -833,8 +858,7 @@ for prefix in `echo "$exepath" | sed -n -e 's,/bin[^/]*/,/shutdown/,p'`; do done done -unset TDE_FULL_SESSION xprop -root -remove TDE_FULL_SESSION -unset TDE_SESSION_UID +unset TDE_FULL_SESSION TDE_SESSION_UID echo "[starttde] Trinity shutdown complete." 1>&2 |